Tech Problem Aggregator

# McAfee 1075 Error

Q: McAfee 1075 Error

Hello All,

I've tried most of today to get rid of a nasty trojan. System-Check!

I'm almost there - or so I thought. Visually my laptop seems to looking okay, except, I can't seem to restart my Firewall within McAfee?

Here's a DDS:
**** EDITED ****

DDS removed - as I managed to solve issue by uninstalling MCafee and reinstlling.
Mods - please remove post or close. thanks

A: McAfee 1075 Error

Mods - please close post or remove.

thank you.

2 more replies

I recently had to reinstal Windows XP Media Center SP3 operating system on my Dell Inspiron 9300 laptop. When trying to install Pure Networks Net Magc Pro it will not run as it says the platform service is no running. When I try to start the platform service I get the following Error 1075: The dependency service does not exist or has been marked for deletion.
Does anyone know how to correct this situation.

Thanks.

A:ERROR 1075

Why not post to the NetMagic forum. You will have more luck there then in this
General Microsoft Forum

2 more replies

Avg found two trojans. It didn't seem like it removed them. Internet was working though. Ran malwarebytes it found nothing. Internet was still working. Started Having connectivity issues. My dhcp client service won't start. I got a 1075 error. my internet via wifi or wired won't work. I ran the following command prompts:
net start AFD (response: the requested has already been started)
netsh int ip reset reset.log (response: resetting echo request, failed. Access is denied. Rebooting interface, ok! A reboot is required to complete this action.
netsh winsock reset catalog (response: successfully reset the winsock catalog. You must restart the computer in order to complete the reset.
SFC /SCANNOW (scan finishes and shows this response: windows resource protection found corrupt files but was unable to fix some of them. Details are included in the cbs.log windir\logs\cbs\cbs.log

I can't run the programs you suggested as I have no internet access. What now? Please help.

A:Help 1075 Error

I will try to run the items above in the other thread in safe mode and paste results. Sorry about that.

2 more replies

My internet will not connect It Keeps saying Acquiring network address, I have tried everything even going into Services.msc to Start DHCP client and it gives me this error
Error 1075, The dependency service does not exist or has been marked for deletion

I am running Windows XP Home Edition SP3 and its Dell

A:Error 1075

First , you may have done this but ..... check if you can start the dependency service for DHCP client service.To view the dependency services registered for DHCP Client Service, try the following steps? Click on Start and them type cmd and press Enter? In the command prompt type: CMD /K SC QC DHCP - Please note the spaces -? Press Enter check if the dependency service is started.Verify that the Dependency Service / components are runningNext -To verify that the three dependency components are running. Follow the steps below:? Click Start, Run and type DEVMGMT.MSC - No spaces -? In the View menu, click Show hidden devices? Double-click Non-Plug and Play drivers section? Double-click the entry AFD, and click the Driver tab? Set the Startup type to System.? Start the service. Note down the error message if any.? Similarly start the two other drivers namely:? TCP/IP Protocol Driver? NetBios over Tcpip? Close Device Manager and restart Windows.? Now check if you can start the DHCP service.Let us know if you have done all this, and we can look for more ideas -

4 more replies

My computer is stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

A:Error 1075

Hi -See if this reset works first. Please read carefully -TCP/IP NetBIOS Helper error 1075 TCP/IP stack repair options for use with Windows XP with SP2/SP3.Start, Run, Type CMD to open a command prompt:In the command prompt window that opens, type the following commands, each followed by the Enter key:Note: Type only the text in bold for the following commands.Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalogReboot the machine. Thank You - EDITED to reset commands -

12 more replies

The full message is error 1075: The dependancy service either does not exist or has been marked for deletion

This started with a tidserv!inf infection. Norton End-Point seems to have deleted all related virus infections, however, I am now unable to start the DHCP service. I have to set a static IP in order to connect to the internet.

I believe tdx.dll was identified as a virus and deleted. it was listed as a dependancy of dhcp but had no descriptor. Currently it is not listed as a dependancy.

I cannot view network shares from this PC nor can I view shares that I host here on other PC's. Only this computer shows up in net places.

I did an sfc /scannow and it told me audiodev.dll and mofd.dll were corrupted and the files in the store have been corrupted.

I had to take ownership with the admin group in order to replace them with extracted copies from my windows cd, but I when I went back to reassign trustedinstaller as the owner it was not listed as an option.

my cd is without service pack and my installed service pack is sp2.

can anyone be of assistance.

A:DHCP error 1075

My dhcp was working for a day but its back down again. i dont know how to recreate the dependancy on tdx

2 more replies

DHCP and TCP/IP can not be started from Services with out the following error.

Error 1075: The dependency service does not exist or has been marked for deletion.

I've checked the dependencies and all are running.

AFD is the only driver common to both DHCP and TCP/IP so I assumed it is either not running or is corrupt..yet when I try to start AFD from the CMD prompt I get...."service is already running.

I have since disabled my Lan Connection via Network Connections as it just sits there trying to acquire ip without ever timing out.

I also performed a registry scan with Registry Booster in Safe Mode. It reported:

1061 System Errors
205 User Errors, and
1 Third Party Error

A cursory review of the log tells me the majority have to do with poorly uninstalled programs. I did NOT let Registry Booster fix anything.

As per Forum Rules my HiJackThis log and others follow:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 7:57:39 PM, on 11/26/2011
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16791)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\PROGRA~1\AVG\AVG10\avgchsvx.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Pure Networks\Network Magic\nmapp.exe

A:Error 1075 Can not Acquire Ip

16 more replies

Hello all,

I've noticed that a few people have posted concerning this topic, so I've tried to read up on as many possible solutions before posting. I'm recently recovering from a mild virus infection on my computer, and noticed that after I had run Avast! and Malwarebytes to remove the virus, my computer lost its internet functionality. Upon running ipconfig in command prompt, I noticed that the computer was not being assigned an IP address, which lead me to believe there could be an issue with DHCP.

When running services.msc, I notice that both DHCP client and TCP/IP netbios are not running, and when I try to run them, I get an error 1075, that the files are "either non-existent or marked for deletion". I noticed that someone else had posted a very similar problem, but a few of the more advanced fixes seemed specifically tailored for their issue.

Below are the fixes I've attempted thus far -

1. Checked the registry for DHCP?s dependencies (3 are listed, Afd, Tcpip, and NetBT).
2. Reset TCP/IP stack to installation defaults by typing ?netsh int ip reset reset.log? into command prompt.
3. Reset WINSOCK entries to installation defaults by typing ?netsh winsock reset catalog? into command prompt.
4. Ran ?sfc /scannow? with an XP SP3 CD.

I'm currently running Windows XP Media Center, Service Pack 3 on a Dell Inspiron E1505 laptop I had purchased in mid-2006.

A:DHCP and TCP/IP Error 1075

Welcome aboard Please download Farbar Service Scanner and run it on the computer with the issue.Make sure the following options are checked:Internet ServicesWindows FirewallSystem RestoreSecurity CenterWindows UpdatePress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.

7 more replies

DHCP error 1075--can not start the DHCP client on local computer.Dependency service does not exist or has been marked for deletion..

Machine is a Dell dimension e520
Win XP Media center edition SP 2

I have the original dell discs and access to a working laptop also running win XP [this one]

During a routine virus scan by avira anti vir it quarentined c:\windowes\system32\drivers\netby.sys.

This disabled the DHCP client so no IP traffic
I restored the file but still no luck

After trying to renew the IP and some searching around I found that the HKEY local machine system currentcontrolset services NETbt registry key is missing

In services DHCP cannot be restarted --gives the warning above.
AFD and TCP/IP are in device manager -non plug & play show hidden devices NETbt is not

Can the registry be repaired from the original discs without having to reinstall everything else?
Or is it as easy as inserting the missing registry key?

Thanks Bob

A:DHCP error 1075

Hi see if this can help How to fix: Error 1075, The dependency service does not exist or has been marked for deletion | Kaliphonia.com

1 more replies

When I try to connect my printer lexmark 4200 series I get the message no print spooler available error 1075 Please HELP!!!

A:[SOLVED] Error 1075

I would make sure the print spooler service is enabled.

Go to Start > Run... and type services.msc to open the service snap-in. Then Scroll down to Print Spooler. Right click on it and click Start. Then right click on it, select Properties, and set the startup type to Automatic.

9 more replies

My windows fire wall wont start Ive tried starting it in services and the action center but no luck, i know their might be a hardware change or virus or malware that has done this but im unable to pin point it the date of any change because Ive only just realized that the firewall was off because i wanted to block a game from accessing the Internet. Ive scanned countless times but it says its clean.  Also windows update wont install updates and system recovery doesn't work...Ive been trying to follow instructions that have been given to other people but with no luck, any help will be appreciated.

my PC:

OptiPlex 760 (Late 2008)

Service Tag: 5M0YJ4J | Express Service Code: 12215778643
32 bit operating system win 7 home premium

many thanks

A:!!firewall error 1075!!

11 more replies

Hello,

I'm recently recovering from a mild virus infection on my computer, and noticed that after I had run Avast! and Malwarebytes to remove the virus, my computer lost its internet functionality. Upon running ipconfig in command prompt, I noticed that the computer was not being assigned an IP address, which lead me to believe there could be an issue with DHCP.

When running services.msc, I notice that both DHCP client and TCP/IP netbios are not running, and when I try to run them, I get an error 1075, that the files are "either non-existent or marked for deletion". I noticed that someone else had posted a very similar problem, but a few of the fixes were not available for viewing/download as they were specifically tailored for that issue.

I'm currently running Windows XP Media Center, Service Pack 3 on a Dell Inspiron E1505 laptop I had purchased in mid-2006.

A:DHCP and TCP/IP Error 1075

Below is a copy of the Hijack This log.

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 9:03:31 PM, on 12/26/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Alwil Software\Avast5\AvastSvc.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\ehome\ehtray.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\ATI Technologies\ATI.ACE\cli.exe
C:\Program Files\SigmaTel\C-Major Audio\WDM\stsystra.exe
C:\Program Files\Microsoft Office\Office12\GrooveMonitor.exe
C:\Program Files\VERIZONDM\bin\sprtcmd.exe
C:\Program Files\Alwil Software\Avast5\avastUI.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\LogMeIn Hamachi\hamachi-2.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\VERIZONDM\bin\sprtsvc.exe
C:\Program Files\VERIZONDM\bin\tgsrvc.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\system32\SearchIndexer.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Documents and Settings\Shivang\Desktop\HijackThis.exe

2 more replies

I am having the same issues as the other thread that is currently going on regarding a virus that seems to have left me unable to connect to the internet , i have done the hijack this report and will post results . please help!!
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 9:17:51 PM, on 12/20/2011
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\LeapFrog\LeapFrog Connect\Monitor.exe
C:\Program Files\Common Files\Java\Java Update\jusched.exe
C:\WINDOWS\system32\spool\drivers\w32x86\3\hpztsb10.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\bin\hpotdd01.exe
C:\Program Files\NETGEAR\WG111T\wlan111t.exe
C:\WINDOWS\system32\netdde.exe
C:\Program Files\SUPERAntiSpyware\SASCORE.EXE
C:\WINDOWS\system32\CTsvcCDA.EXE
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\LeapFrog\LeapFrog Connect\CommandService.exe
C:\WINDOWS\system32\svchost.exe

A:Error 1075 no internet

help

1 more replies

Help me please, I have the same problem, and here is the SystemLook result:

SystemLook 30.07.11 by jpshortstuff
Log created at 09:34 on 18/12/2011 by USER

========== filefind ==========

Searching for "afd.sys"
C:\Windows\System32\drivers\afd.sys --a---- 338944 bytes [12:25 16/12/2011] [12:21 16/12/2011] 9EBBBA55060F786F0FCAA3893BFA2806
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7600.16385_none_d7be98b5bfc0b4c1\afd.sys --a---- 338944 bytes [23:12 13/07/2009] [23:12 13/07/2009] DDC040FDB01EF1712A6B13E52AFB104C
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7600.16802_none_d81220b5bf827af7\afd.sys --a---- 338944 bytes [10:52 17/06/2011] [02:35 25/04/2011] 0DB7A48388D54D154EBEC120461A0FCD
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7601.17514_none_d9efac7dbcaf385b\afd.sys --a---- 338944 bytes [02:30 09/07/2011] [08:40 20/11/2010] 1151FD4FB0216CFED887BFDE29EBD516

A:Cannot connect to internet - Error 1075

Can I see you FSS log again?

and run it on the computer with the issue.

* Press "Scan".
* It will create a log (FSS.txt) in the same directory the tool is run.

1 more replies

Greetings,
I am having a major DHCP error on my girlfriend's laptop. I am primarily a Linux user so I'm kinda lost here as her machine is running XP. It's a Dell XPS M1210 which, conveniently, did not come with a recovery CD or even partition.
Anyway, a few weeks ago her wireless network device stopped working. It would look like it was connecting, but it would hang on "Acquiring network address." At first I thought maybe the device was shot, until I had the chance to test out the wired ethernet, which has the same problem.
After quite a bit of googling, I ran services.msc, and saw that DHCP is not running. When I try to start it from that menu, however, I get this message: "Could not start the DHCP Client service on Local computer. Error 1075: The dependency service does not exist or has been marked for deletion."
After more googling, I discovered that DHCP has only 3 dependencies: TCP/IP, AFD, and NetBt. I checked the registry, and those were the only ones listed.
After even more googling, I ran devmgmt.msc and selected "show hidden devices" and double clicked on "non plug and play devices." I TCP/IP and AFD are both there. NetBt, however, is not.
I've spent hours doing further googling and tried pretty much every fix I could find and nothing seems to work. If the PC had shipped with a recovery CD I imagine this would be easy to fix but alas no luck. I need to get this working so I can set up my new internets and I... Read more

A:Solved: DHCP Error 1075

15 more replies

My computer is forever stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. Attached is the logs you wished. Hopefully someone can help out. (Note: This is not the affected computer, the logs are from it, however) I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 8:29:14 AM, on 12/13/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Symantec Shared\PIF\{B8E1DD85-8582-4c61-B58F-2F227FCA9A08}\PIFSvc.exe
C:\Program Files\Common Files\Motive\McciCMService.exe
C:\Program Files\Common Files\McAfee\McSvcHost\McSvHost.exe
C:\WINDOWS\system32\mfevtps.exe
C:\WINDOWS\system32\HPZipm12.exe
C:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Yahoo!\SoftwareUpdate\YahooAUService.exe

A:Cannot connect to internet - Error 1075

Thanks for the quick response guys, You're a lifesaver. I shall be sure to recommend that all my friends come to http://www.bleepingcomputer.com for all their troubles too!

1 more replies

DHCP Client will not start from services menu and neither will TCP/IP all other networking services appear to be started and working.

DHCP dependencies are:

AFD Networking Support Environment
TCP/IP Protocol
IPSEC driver
TCP/IP dependencies are:
AFD

Since the TCP/IP's only dependency is AFD I suspect it has been deleted or corrupted. How do I go about fixing that?

Paste SYSINFO.txt

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 2, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 1
RAM: 1023 Mb
Graphics Card: NVIDIA Quadro NVS 280 SD, 64 Mb
Hard Drives: C: Total - 38099 MB, Free - 8667 MB; E: Total - 29313 MB, Free - 16148 MB; X: Total - 95393 MB, Free - 69980 MB;
Motherboard: Dell Computer Corp., 0W2563
Antivirus: AVG Anti-Virus Free Edition 2011, Updated: Yes, On-Demand Scanner: Enabled
I already reset the ip stack with the following to no avail.

Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log

Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog

Reboot the machine.

I'd really like to avoid the nuclear option. Any assistance is greatly appreciated.

Thanks

A:Solved: Error 1075 Can not Acquire Ip

8 more replies

My computer is forever stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. Hopefully someone can help out. (Note: This is not the affected computer, the logs are from it, however) I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

A:Cannot connect to internet - Error 1075

Hi -As long as you can understand the 'reasonably basic' directions, there is a solution here -http://www.google.com.au/url?sa=t&rct=j&q=error%201075&source=web&cd=1&ved=0CDsQFjAA&url=http%3A%2F%2Fkaliphonia.com%2Fcontent%2Fwindows%2Fhow-to-fix-error-1075-the-dependency-service-does-not-exist-or-has-been-marked-for-d&ei=jwvpTrX9K4fBiQfsoqHSCA&usg=AFQjCNGUfPzx_GkR2922eUot0LA67VjvMAThank You -

25 more replies

When I try to start the DNS server service on a windows 2000 server it won't start and gives me an error 1075 and says "The dependency service does not exist or has been marked for deletion. Any suggestions, help or advice would be gratefully appreciated.

A:Server DNS Issue - Error 1075

Take a look at this see if it helps:

http://support.microsoft.com/kb/839089

1 more replies

Need help solving Error #1075 problem in conjunction with CheckPoint VPN NGX R60 HFA3. I am using a Dell E6510 laptop computer running Windows 7 Ultimate 32-bit OS. I can get this VPN to run and connect when I use Microsoft's XP virtual machine sitting on the Windows 7 desktop but I cannot get it to run on the Windows 7 desktop by itself.

Although the VPN seems to load without incident the associated icon "key" does not appear in the notification tray at the lower right. It does appear in the XP virtual machine and on a separate HP desk top running Vista.

When I type services.msc at the Win 7 command prompt I get a list of all the loaded services including the CheckPoint VPN. It is at this point when I try to start the VPN I get the 1075 error. When I check the dependencies under the VPN I find the "CheckPoint Office Mode Module" and the "VPN-1 Module".

How do I determine if these dependencies are causing the 1075 error message? What steps do I need to take to resolve the error message so the VPN will start?

A:CheckPoint VPN Causing Error #1075

make sure your Firewall is allowing the following:
SR_SDS.EXE
SR_GUI.EXE
SR_WATCHDOG.EXE
SR_SERVICE.EXE

If you're running 3rd party software FW, disable or uninstall it.

1 more replies

I have read through the original thread (now closed) and tried all it's suggestions. However, I am still having the same IP (on lack of) issues. I ended my efforts with the running of SFC /SCANNOW which took a considerable amount of time, but resulted in no errors of any kind.

I continue to get the Error 1075: the dependency service does not exist or has been marked for deletion, message when trying to start the DHCP Client.

I'm afraid searching the suggested logs for the dependency items it a little over my head.

A little background for my situation. The computer in question is my teenage daughters. A week ago she started having problems with the internet and I'm assuming this is some sort of virus. Whenever selecting a website to launch to, something intervenes and chooses some alternate website. Never the same one twice. I loaded AVAST free version and did a scan. I also updated Malware Bytes and did another scan. I then loaded Kaspersky TDDS killer and did a scan with that. After all that, and roughly 15 files quarantined and deleted, I now have this IP problem. I cannot restore the computer back to an earlier time.

Help would be greatly appreciated!

A:DHCP Error 1075 Cont.

16 more replies

My PC is three years old and has been a great machine. I run Windows XP Home Edition, I.E. 7 and have all the protection installed I can find.

Quite by accident I discovered my System Restore is not working. I don't need it at the moment (!!!) but I like everything to be as near as perfect as possible on my PC so I have been trying to discover what the SR problem is and how I can resolve it.

I keep getting the message "S R is not able to protect your computer. Please restart and run SR again"............This advice does not work. for me!
I cannot turn off SR for the same reason.

I then checked out this section of the forum and discovered that many people have had this same problem. I have tried downloading Kelly's file 238 (I think that was the number) ; I have tried accessing services.msc ; I have tried accessing i386: nothing!

I did get the message "Error 1075: "Dependency service does not exist or has been marked for deletion". This error seeems to apply to many facilities on a PC.

I have my windows XP disk but cannot lay my hands on the SP2 one so I don't want to mess about without your professional advice to do so!! (apologies!)

As I said, if you solve my problem you will be miracle workers and worthy of your wings.

A:System Restore Won't Work : Error 1075

Right click My Computer > Manage > Expand Event Viewer > Look under Application and/or System to see if there is any event reporting on about System Restore.

Please do let us know if there is, a screenshot would be a great help.

Another workaround would be searching for sr.inf, right click it and select "Install". You might need Window XP install disc.

61 more replies

Hey all!
I am really desperate. I've tried a few things that other people have posted here, especially Cookiegal and Lumpola but this issue persists.

I had a virus. I think I got rid of it. Avast scans and boot time scans and Super Anti Spyware and TDSS killer report all clear. However, the network shield of Avast and the Internet don't work.
Points to note:
1. In services, the DHCP and DNS cannot be started. I get the error 1075: service has been marked for deletion or one of it's dependancies are missing. (close to that)

I've checked the dependancies of both, and reinstated the ADF module in device manager after selecting the 'View Hidden' option.

A:DHCP Server Service -Error 1075 - not starting

2. I've tried deleting the winsock and winsock2 entries in the registry.
3. From the command prompt, SFC/scan now terminates at 82%. thrice.
4. I can see the network, both wired and wireless, I can connect, but it says I have limited connectivity.

3 more replies

This is my sister's netbook. The problems started with one of those new "fake antivirus" that puts up a ton of obviously fake results that claim your computer is highly infected*. She being... less technologically inclined apparently decided to run the "Antivirus scan" over and over again over night and then the next day gave it to me to try to figure out what was wrong. I can't find the links right now but I found a bunch of blogs that mentioned (Privacyprotection.exe) and among the most frustrating aspects what that it blocked pretty much everything from running. I did a bit of digging and eventually found out it was a rootkit causing the issues and the tools they gave me wouldn't run but I was able to follow the manual instructions. (remove the .exe, remove the alias, regedit and remove the key that matched privacyprotection.exe but not the other ones like the one underchrome etc).That took care of the major problem and I was able to get Microsoft Security Essentials running but everyscan kept turning up a few "Trojans" and that upon trying to clean would result in an error. The error would lead to 'restart to finish removel'. I tried safe mode and the same result. One top of that google results kept getting redirected (forget the site right now.. something like awesomesearch.com or what have you). I decided to try from another angle the redirect angle and found thishttp://www.bleepingcomputer.com/forums/topic422038.htmlI t... Read more

More replies

Hey Everyone.

Maybe someone could be of help. I have gone through several different forums and have attempted several ways to try to fix this but have had no luck.

I have tried the netsch winsock reset
I have tried the ipconfig /renew
My DNS service starts but my dchp client doesnt want to and gives me the error 1075.
I have removed NAV still nothing.

I have also tried many other alternatives but im just not remembering at the moment and I am just stumped.

Internet works on my other two computers, but my laptop is what seems to not want to connect wirelessly or routed. Something seems to be blocked or missing.

If anyone can please help me in any way possible it would greatly be appreciated. If you need me to provide some more details please let me know.

Thanks
Lewis B.

A:Error 1075/No Internet after Norton Anti Virus

16 more replies

My computer (vista) was infected with a virus. So I first used rkill/iexplore then ran Malwarebytes Anti-Malware since my protection (Panda) doesn't seem to do its job correctly. The first time I did this, everything seemed to return to normal. Couple of days later, the same virus started up. I redid what I did...and it seemed to work again...until I tried using the internet. (I think Malwarebytes deleted something in the registry?)

There was an error saying that "DHCP error 1075: The dependancy service either does not exist or has been marked for deletion". I googled this on my laptop and followed some of the instructions found online. None of it worked...

I went into device manager->hiddle files->non plug and play drivers:
There was a problem with these with the same code for them: This device is not present, is not working properly, or does not have all its drivers installed. (Code 24)
App Filter Plugin
NetMon Filter Plugin
Panda Net Driver [TDI Layer]
VSCore mferkdk

Finally, I have included the last three logs from Malwarebytes showing which files were deleted by the program.

Thank you for looking over this!!

A:DHCP error 1075- Internet Doesn't Work

There is a dedicated forum for virus/malware issues regardless of your Windows version.
It's here: Virus/Trojan/Spyware Help - Tech Support Forum

(We aren't permitted to give virus removal help on the Windows forums)

2 more replies

I had a virus that would not allow me to get any icons, this was fixed after i ran avg in safe mode.

When i got back into the machine I received many pop ups one after another, ad-aware was run and after I cannot start any services, I have everything set to start in msconfig i have admin I cant change users, i cant do windows search, cant see any networks in network places nothing i cant even copy and paste the paste option is Grey when i try to copy then paste...

Every service I try to start i get error 1075 dependency service does not exist for all services.

also the Extended services tab give me nothing not list of any services only the standard tab.. I can click start and i get the error.

also Ad-aware gives me an error too when it tries to start system error 1810 has occurred service is not online.

Maybe i need to do a system restore i hope i don't lose all the pictures etc.. I cant copy and paste and its a laptop so i would need an adapter to put it on a desktop.. i think i will be OK with a system restore.

More replies

This is really bad.. I cant copy and paste to backup files for reformat and this sony laptop is telling me that the recovery will delete all files, so no option to do a windows repair. I might need to buy a 2.5 to 3.5 adaptor for this mess im in, if you cant help.. I did many things so far nothing worked..

I had a virus that would not allow me to get any icons, this was fixed after i ran avg in safe mode.

When i got back into the machine I received many pop ups one after another, ad-aware was run and after I cannot start any services, I have everything set to start in msconfig i have admin I cant change users, i cant do windows search, cant see any networks in network places nothing i cant even copy and paste the paste option is Grey when i try to copy then paste...

Every service I try to start i get error 1075 dependency service does not exist for all services.

also the Extended services tab give me nothing not list of any services only the standard tab.. I can click start and i get the error.

also Ad-aware gives me an error too when it tries to start system error 1810 has occurred service is not online.

Maybe i need to do a system restore i hope i don't lose all the pictures etc.. I cant copy and paste and its a laptop so i would need an adapter to put it on a desktop.. i think i will be OK with a system restore.

More replies

Hello,

On July 12th 2012, my computer installed updates. After rebooting and waiting for me on the login screen, I gave it a hard shutdown to check on the BIOS settings (for a little side project, in the end I did not save any changes). After booting and logging in again, I find that many services are not running. I ran a very thorough check for malware and viruses (took over 24 hours to complete), and still no solutions. I have uninstalled/reinstalled my Broadcom 802.11g Wireless Driver several times.
I now look in the Event Viewer and find that the DHCP Client service is not running! It is set to automatic start in Services.msc, but when I try to manually start it, it gives me error 1075 (some dependencies do not exist or are marked for deletion). Running ipconfig, I notice that my system is using an APIPA-formatted address (169.254.x.x), indicating that the computer couldn't find a DHCP server.

My Event Viewer is peppered with:
------------------------------------------------------------------------------------------------
Event 7003, Service Control Manager

The DHCP Client service depends the following service: Afd. This service might not be installed.
------------------------------------------------------------------------------------------------
Event 7001, Service Control Manager

The WinHTTP Web Proxy Auto-Discovery Service service depends on the DHCP CLient service which failed to start because of the following error: The dependcy service does not ex... Read more

A:DHCP Client Service FAILS TO START! (Error 1075)

It sure sounds like your computer is having its share of issues. Did you get the services started that you mentioned in your other thread?

7 more replies

Avg found two trojans. It didn't seem like it removed them. Internet was working though. Ran malwarebytes it found nothing. Internet was still working. Started Having connectivity issues. My dhcp client service won't start. I got a 1075 error. my internet via wifi or wired. I ran the following command prompts:
net start AFD (response: the requested has already been started)
netsh int ip reset reset.log (response: resetting echo request, failed. Access is denied. Rebooting interface, ok! A reboot is required to complete this action.
netsh winsock reset catalog (response: successfully reset the winsock catalog. You must restart the computer in order to complete the reset.
SFC /SCANNOW (scan finishes and shows this response: windows resource protection found corrupt files but was unable to fix some of them. Details are included in the cbs.log windir\logs\cbs\cbs.log

A:Network issue dhcp client service error 1075

I'm thinking you're still infected.

----------------------------------------------------------------------

You need to start a thread in the Virus & Other Malware Removal section of this site.

Before you post though, you need to read THIS guide.

1 more replies

i have been fighting with this problem for ages.
my sound does not work, i dont know why, as far as i know, nothing was added before this started, everything was working, i got up the next day and there was no audio, it no longer registers my disc drive as being there, and i cant play an videos from youtube (other sites fine, though still no audio)
laptop tells me, theres no audio installed, but all drivers state everything present. tried on here before but with no luck

heres a run down from my last post:

i have no audio. if i click troubleshoot problems it says the audio service is not running
it says the windows audio and endpoint builder arent working
if i go into services, windows audio is set to automatic but its not on, when i click start it says "error:1075 the dependency service does not exist or has been marked for deletion"

medion akoya e6214 notebook
windows 7 64 bit sp1 home premium edition
intel core i3cpu [email protected]
4gb memory
2 ram i think
also, i have no system restore points, the windows repair disc doesnt work and i have no windows 7 install disc and cant burn one as my disc drive wont register

i have installed drivers for medion akoya as instructed but it did nothing

windows audio still states its not working, when i go to services, its set to automatic but wont stay on and i get the above error message!

im at my wits end, i cant back up anything so i dont lose it, cant restore, or repair, sfc scannow says i cant do it unless im admi... Read more

A:windows audio: error 1075 the dependency service does not exist or has

From your description there are many more problems than just the windows audio error.

I would suspect an Operating System problem. If you can find a friend to download the Windows 7 Home Premium ISO and burn it to a DVD, that would give you the needed disc to try and repair Windows. Although your DVD drive does not work in Windows, it should work for booting.

Here is the link to the forum post. There are links to the various versions. You can download the same version that you have.

4 more replies

I have a similar problem.... turn on print spooler, then go to add a printer and it says the print spooler is not running. round and round I go.

More replies

Not sure why this problem is persisting. I appear to have all the dependent files. I have run SFC/ scannow to no avail. I cannot start the services in question. The 1075 error message continues. I have attached my system info.

A:Solved: DHCP client and TCPIP Netbios helper 1075 error

I was able to restart DHCP services by deleting the registry entry and rebooting. I went into the registry editor, located the DHCP subkey, right click on dependonservice and clicked on delete.
However TCPIP Netbios helper I could still not start, even after running sfc/scannow.
The solution for me was to restore the operating system to an earlier point in time. In windows xp, go to programs> accessories>disk utilities> system restore and follow the directions. I suppose I could have done that for both problems? At least I didn’t have to reinstall XP!

Anyway I can connect to internet now

1 more replies

Apparently something called print spooling is not working on my computer. I get error message 1075: the dependency service does not exist or has been marked for deletion. I believe this is why the installation won't go all the way to the end. The computer recognizes the printer but won't go ahead and finish installing it. Anybody got any suggestions?

A:Printer installation won't complete. Error 1075: the dependency service does not exis

Are you using Windows ME or Windows XP?

14 more replies

Hi when i try to run my windows XP sp2 windows firewall to stop it from disabling my connections. i get the message "Windows firewall cannot be displayed because the associated service is not running. Do you want to start the Windows firewall/internet connection Sharing (ICS) service?" i click yes then i get "Windows cannot start the Windows firewall/internet connection sharing (ICS) service.". i then went start>run>services.msc and found that when i try to manually run the Windows firewall/ICS i get this message "Could not start the WF/ICS service on Local Computer. Error 1075 the dependancy service either does not exist or has been marked for deletion." Please help me. I just want to be able to open my ports and host Warcraft 3 games.

A:Windows Firewall/Internet Connection Service cannot start...error 1075.

6 more replies

After a Trojan attack, I used Kaspersky Virus Remover to remove them. It seems to have been successful, but now I can't access the internet.

Below are clues to resolving the problem. I just don't know what to do next.

Can you help? I'm using XP sp3.

=================

The following files are present in /Windows/System32/Drivers folder...
* afd.sys
* tcpip.sys
* netbt.sys (It was missing; so I copied to here from ServicePackFiles/i386)

=================

CMD /K SC QC DHCP reported this...

[SC] GetServiceConfig SUCCESS

SERVICE_NAME: dhcp
TYPE : 20 WIN32_SHARE_PROCESS
START_TYPE : 2 AUTO_START
ERROR_CONTROL : 1 NORMAL
BINARY_PATH_NAME : C:WINDOWS\system32\svchost.exe -k netsvcs
TAG : 0
DISPLAY_NAME : DHCP Client
DEPENDENCIES : Tcpip
: Afd
: NetBT
SERVICE_START_NAME : LocalSystem

=================

In Device Manager,
* AFD Networking Support Environment is running successfully
* TCP/IP Protocol Driver is running successfully
* NetBios over Tcpip - DOES NOT EXIST

=================

In services when attempting to Start these services

* DHCP Client Properties (Local Computer) and
* TCP/IP NetBIOS Helper

I got these errors...

* Could not start the DHCP Client service on Local Computer
* Could not start the TCP/IP NetBIOS Helper service on Local Computer
* Error 1075: The dependency service does not exist or has been marked for deletion.
* Under the dependencies tab: No Dependencies in either box.

=================

A:Cannot Access Internet after Virus Removal - Netbt.sys, NetBios missing - Error 1075

16 more replies

Can someone please help, I can't connect to the internet whenever I connect it just connects local only and says the dhcp client isn't working on this computer when I go into services to manual start it says windows could not start the dhcp client on local computer error 1075 the dependency service does not exist or has been marked for deletion it happens on anyones internet I cant connect to wired and wireless, any help will be really appreciated as I have been trying to fix this for weeks now

A:windows could not start the dhcp client on local computer error 1075 the dependency s

Hello, lets do some cleaning up and see if that helps you out .
How to Flush DNS in Windows Using the Command Prompt

Step 1 ? Close all open web browsers and applications on your computer.

Step 2 ? Open the Windows command prompt by selecting the ?Start? menu and then go all programs, accessories, then right click command and run as admin.

Step 3 ? At the command prompt, enter ?ipconfig /flushdns? followed by pressing the ?enter? key. After a moment, Windows will display a message similar to: ?Successfully flushed the DNS Resolver Cache.? Once the message is displayed, the DNS will be flushed removing all incorrect entries.

Then , we want to get the IP reset, so, lets renew its settings and see if this also helps out :
you will type in the command box : ipconfig /release then enter, then next ipconfig /renew then enter, this will reset the IP , now restart and attempt to have it reconfigure its connections to your router. Post back results please.

3 more replies

Hi - would be very grateful of some help! Running XP Media Center Edition, Version 2002, SP3. Using IE7 primarily, but also Firefox 3. :In IE, although it doesnt happen all the time, Google often re-directs to various ad-sites, although the correct site can be reached by clicking Back. It will not let me access the McAfee website - giving a "HTTP 501 Not Implemented or HTTP 505 Version Not Supported" error. Firefox randomly crashes and re-starts every now and then and gives a blank page with "The specified method is not supported" for McAfee.McAfee Security Centre does not start up automatically any more on startup even though I havent changed any settings. When the program is opened from the desktop it states the detection signiture is out of date, however when I try to update, it appears to try before giving an update error and telling me to reinstall McAfee Internet Security (which I can't do because I cant access the website!).Having looked at several topics on here and other boards, I have tried doing the following scans with the respective results - all without any success:SUPERAntiSpyware, first scan:SUPERAntiSpyware Scan Loghttp://www.superantispyware.comGenerated 04/21/2009 at 01:23 AMApplication Version : 4.26.1000Core Rules Database Version : 3854Trace Rules Database Version: 1806Scan type : Complete ScanTotal Scan Time : 01:29:29Memory items scanned : 674Memory threats detected : 0Registry items scanned : 7459Registr... Read more

A:Google redirections, McAfee update error and McAfee website blocked

6 more replies

Symptoms:
Slow system
McAfee runs very slow
McAfee is not protecting my system
After manual McAfee scans the same virus is always there, W32/Bagle
internet works
can not boot in safe mode

How it started:
I loaded a program that I downloaded and then it disableded McAfee and then the system shut down and rebooted. McAfee has never worked properly since. It tells me to
"fix" the problem and it always returns an error.

System:
XP professional version 2002 with service pack 2 and most of the updates (updates that can not be removed later are not installed on my system)
Pentium 4 CPU 2.40GHz and 1.5GB RAM

McAfee:
Protection status: FIX
Action required! for
Computer and Files
Email and IM.
Internet and Network says: Attention

Security Center
Version 8,1
Build 8.1.173
Affid: 0
Last update 4/17/2008

Virus Scan
Version 12.1
Build: 12.1.110
Affid: 0
Dat version 5280.0000
DAT date 4/23/2008
Engine Version 5200.2160

Firewall
Version 9.1
Build 9.1.108
Last update 4/17/2008

Version 2.6
Anti Spam
Version 9.1
Privacy Service
Version 10.1
Data Backup
Version 1.2

I did a manual search of the system files and McAfee finds and Quarentines
Wintems.exe W32/Bagle.gen (virus)

Location is C:/Windows/System32

I go to restore and remove and I can scan again and it is always there.

System restore is diabled

I can not boot into SAFE MODE. I can choose it but it always starts the boot seqence over and asks... Read more

A:McAfee has error, W32/Bagle.gen always returns after manual McAfee removal

Hi, welcome to TSF!

Please re-enable system restore. An infected system restore cache is better than having nothing at all.

http://www.bleepingcomputer.com/comb...o-use-combofix
Please ensure you read this guide carefully and install the Recovery Console first.

The Windows Recovery Console will allow you to boot up into a special recovery (repair) mode. This allows us to more easily help you should your computer have a problem after an attempted removal of malware. It is a simple procedure that will only take a few moments of your time.

Once installed, you should see a blue screen prompt that says:

The Recovery Console was successfully installed.

Please continue as follows:Close/disable all anti virus and anti malware programs so they do not interfere with the running of ComboFix.
Click Yes to allow ComboFix to continue scanning for malware.
When the tool is finished, it will produce a report for you.

Please include the following reports for further review, and so we may continue cleansing the system:

C:\ComboFix.txt
New HijackThis log.

Click the Download button. When the Trend Micro HJT install box appears, double click on the HJTInstall.exe. Click on Install.

It will be installed by default here: C:\Program Files\Trend Micro\HijackThis

A shortcut to the application will also be placed on your Desktop.

15 more replies

As of recently, I may have edited one registry after previously messing with a registry deletion using AVP cleaner. Now my LAN internet connection won't get past Acquiring Network and also my IP/Subnet are both 0.0.0.0 and my default gateway is blank. Someone please help me please

A:DHCP & TCP/IP getting #1075 Errors

16 more replies

Recently purchased a new computer. I was having issues with installing Windows 7 and learned that HyperTransport is sometimes the cause of the issue and by turning it from "Auto" in the BIOS settings to "X1" can resolve the issue, and for me it did.

After installing Windows 7 and waiting to see if there were any other errors I went back to turn HyperTransport back to "Auto" I'm above computer savvy, but not far when it comes to hardware, I'm more of a software kind of guy. After doing so I was receiving consistent BSOD's. And after turning HyberTransport back to "X1" they went away narrowing it down to this being my issue.

I didn't know if updating my BIOS would help the issue so I decided to ask around first.

Computer Specs:

AMD Phenom II X6 1075T with HyperTransport
Gigabyte GA-870A-UD3
8Gig of Corsair Dominator

I have no idea about the power that any of these pieces should be receiving, nor if that would even be the cause of the problem. Also, windows freezes along with the BSODs saying that a video driver went out but was recovered, I just installed the latest video drivers. At the time of posting this the computer has been running for 2hours without HyperTransport set to "Auto"

Would updating the BIOS fix the problem?

Thank you!

More replies

I have encountered some nasty viruses etc including some that stopped my windows updates. (I am operating on w/ XP on a Inspiron 6400) - I have managed to fix the updating problem, but still have some bad stuff b/c the resolution of my screen is blurry and my system is operating very-very slowly. I have tried to remove (O23 - Service: McAfee Online Backup (MOBKbackup) - McAfee, Inc. - C:\Program Files\McAfee Online Backup\MOBKbackup.exe) a number of times but have been unsuccessful - that is my reasoning that it is bad. Am I totally off base? Also in the same regard I can not get rid of (O23 - Service: NVIDIA Display Driver Service NVSvcALG (NVSvcALG) - Unknown owner - C:\WINDOWS\system32\adsldpcy.exe (file missing) - Please advice.Also this is my first post so I am not real sure if it makes any sense - ThanksLogfile of Trend Micro HijackThis v2.0.4Scan saved at 3:10:51 PM, on 7/13/2010Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v8.00 (8.00.6001.18702)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\csrss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32&#... Read more

A:IS- O23 - Service: McAfee Online Backup (MOBKbackup) - McAfee, Inc. - C:\Program Files\McAfee Online Backup\MOBK...

2 more replies

I have windows 98se and recently tried deleting avg when installing McAfee, worked fine until I turned my computer off then got nothing but errors.
I cant remove AVG off the add/remove board and also cannot reinstall anything even from scratch,
everytime I do I recieve the message *cannot init language file* this is the same message for both avg and McAfee so really at a loss.
have also been recieving the messages when I logg on to the computer
avgcore.vxd and avgfsh.vxd cannot find if you want to continue using reinstall you know the normal jargon

A:AVG n McAfee error

Did you delete avg 1st, then reboot, then install McAfee? Otherwise there'd be files clashing. Try this: boot into safemode and type in 'find' Grisoft and delete all files; type in 'run' regedit and back up registry by Registry/Export Registry (select range 'all') to desktop (if anything goes wrong just double-click on desktop icon and registry will revert back), and navigate HKEYS_LOCAL_MACHINE/Software/and delete Grisoft folder. Reboot and follow same procedure for McAfee. Reboot then install McAfee.

2 more replies

Hello This all started randomly last night out of nowhere. Last night, McAfee popped up with an error that everything shut down (virus/spyware protection, SystemGuard, script scanning, email/IM scanning). I wasn't doing anything when this happened except playing a very old game and downloading a torrent. It's possible the torrent could have been malware, but I'm not sure; it hadn't finished downloading. I did a Kaspersky scan that turned up nothing, and McAfee turned off again in the middle of it. Shut my computer off for the night, turned it on again this afternoon... McAfee, again, had turned off all protection upon startup. In my processes there was three unusual programs running: dumprep.exe, dwwin.exe, imapi.exe. Decided I should probably get some help with this before it possibly turns worse.

Thanks!
DDS (Ver_09-07-30.01) - NTFSx86
Run by Opie Taylor at 13:06:02.67 on Thu 07/30/2009
Internet Explorer: 8.0.6001.18702
Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.2047.1524 [GMT -4:00]

AV: McAfee VirusScan *On-access scanning enabled* (Updated) {84B5EE75-6421-4CDE-A33A-DD43BA9FAD83}
FW: McAfee Personal Firewall *enabled* {94894B63-8C7F-4050-BDA4-813CA00DA3E8}

============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe

A:McAfee error

6 more replies

When running a scan with Mcafee, the following message appeared, 'Unable to complete scan due to erro that cannot be fixed. Error =-2147467959.' Does anyone know what I can do?

A:Error in McAfee

Delete anything related to McAfee and download and install the free version of Avast or Advir antivirus. While you are at it, download and install free Malwarebytes and CCleaner. Run these often

2 more replies

a friend of mine called and said that when his daughter boots their computer that they get a message that mcafee has been tampered with run an emergency installation? i don't know if that is the exact message, but it is a new one on me. any ideas? the result of the message causes their computer not to boot. i suggested that they uninstall macafee; reinstall it and see what happens. thanks.

A:mcafee error message

I would make the same suggestion, but if they are unable to boot to windows; how do you propose they uninstall it ?

3 more replies

Hi - first time on this forum. Very happy to have stumbled upon it!

Anyway, I just got a new pc and I'm migrating everything from the old pc. I'm encountering a problem trying to reinstall my McAfee Internet Security Suite 7.0 using the original CD onto my new Windows XP Home SP2 edition pc.

The install runs until the "Install Complete" window opens, and when I click the Finish button, I get a screen stating there is an Internet Explorer script error. To be exact:

mcp://E:\Mis\Enu\misins.dll::finish.htm

I've tried the online McAfee (Non) Help Desk, but I'm not paying $60 to speak to a live person. I've installed the latest script package from Microsoft and downloaded a file from McAfee and installed it, but to no avail. Any suggestions? I will be forever grateful! Thanks, Jamie A:McAfee Install DLL Error Hi Jamie, Do you have "English (United States) set as your language format (go to Start > Settings > Control Panel > Regional and Language Options to check)? 1 more replies Answer Match 41.16% Hey guys - I'm having trouble with the administrator account on this machine. I can log on as all sub users but when i try logging in to the administrator i get this error Any ideas Any help would be great. Thanks A:McAfee administrator error Deactivate script errors and debugging, the problem will be on websites more than in your system Internet Explorer, Tools - Internet Options - Advanced - Disable Script debugging (tick) - Display a notification about every script error (untick) 2 more replies Answer Match 41.16% Hey guys, I'm running XP on a laptop and recently I have been getting this error message that has mscifapp.exe on top and the body says something to the extent of: "The instruction at "0x0037342a" referenced memory at "0x00630ac8". The memory could not be "read". This started to occur when I disabled Spam Killer on McAfee and I installed Endura and Spy Sweeper. It may or may not be related but on Endura under options I was filling out, it would not let me proceed because I had not entered a "Positive Interger". I'm no rook with a computer and I tried manipulating the form as much as possible but I think these problems are over my head. Any help would be much appreciated. Thanks. ----Update----- I uninstalled Eudora and McAfee Privacy Service, then reinstalled McAfee Privacy Service. The error message still comes up. A:Error Message - McAfee Well, I have discovered the source of this problem. In my case, this problem would occur if you have Mcafee Privacy Service version 8 running on your PC and Webroot Spysweeper is turned on. It may also take place if you had Spysweeper on when you installed Mcafee Privacy Service or Mcafee Internet Security 8.0. So I turn on Spysweeper when I actually need to scan for spyware. Otherwise this error message keeps bothering all the time. 2 more replies Answer Match 41.16% I have uninstalled everthing that belongs to McAfee using 'install/remove' from CONTROL PANEL. However, when I turn my Toshiba lapto (JUNK) on I get an error window that says "X Some commponents of ActiveShield are either missing or might not have been installed properly". Now I did a indepth search for anything with "ActiveShield" in it and nothing turns up! How do I get rid of this annoying window? A:McAfee error window Run Msconfig and see if you have any leftover McAfee startup entries, if so uncheck them. 3 more replies Answer Match 41.16% Installed McAfee 6 weeks ago. For the second time I have an error message that says "The detection signature file is between 8 and 29 days old." I spent hours on the phone with tech support and it only got worse. Long story short....I uninstalled /reinstalled as per McAfee directions and problem went away for 1 week! Should I junk this program? I'm very frustrated! When I do a Google search, it seems this problem has been around for years. I suspect that my AOL may be contributing as it seems to interfere with everything. I'm really not very tech savvy, so please help with terms for dummies. Thanks A:Mcafee error message 12 more replies Answer Match 41.16% I downloaded Mcafee from comcast and now my computer wont boot.I keep getting error accessing boot sector file A:boot error after Mcafee Quote: Originally Posted by snuff7865 I downloaded Mcafee from comcast and now my computer wont boot.I keep getting error accessing boot sector file Hi. . . 1. If the error read: I/O error accessing boot sector file Multi(0)disk(0)rdisk(0)partition(1)\\BOOTSS Back to the top This error usually occurs when you attempt to boot into the non-XP OS. Your pc uses the "bootsect.dos" (although error indicated an incorrect BOOTSS file) during boot-up for the non-XP operating system. bootsect.dos is a hidden, read-only file and if it becomes corrupted or is missing from the root drive, this error occurs. You can search for this hidden file in the c:\ root. If found it should be delted as it is probably corrupted. It will need to be re-created or restored from a recent backup. The following Microsoft Knowledge Base article describes this error in greater detail: Microsoft Knowledge Base #154733 - Error accessing Boot Sector File - \\BOOTSS The following Microsoft Knowledge Base article describes the re-creation of bootsect.dos as specified in the above KB154733: Microsoft Knowledge Base #101789 - Reconstructing "bootsect.dos" - Win NT 4.0 2. If you do not have a dual-boot system, please write the error down verbatim and post. In addition, system specs are needed for further help. ... Read more 1 more replies Answer Match 41.16% Hi, I'm having trouble with the HP dv1000 laptop... it has XP and I think the most current service pack (2, 4, i dunno... ). Let me preface this entire post by admitting: I have a *ton* of music on my computer, probably between 3,500-4,000 songs.... however, these songs were on my computer for practically a YEAR before my computer decided to turn into a tortoise. I thought maybe it was due to spyware, so I went right over to CompUSA and had the sales associate pick out a virus/spyware program for me... he picked out McAfee. Not only did it NOT cleanup anything, but the darn thing messed with my firewall settings, but it also messed with my ip address and finally left me 1) without internet access, and 2) a "winsock error" (according to the HP rep I talked to). So, she gives me the number to McAfee, and they try to charge me$2.95 PER MINUTE to talk to a rep, but they cannot estimate or approximate how long the call will take. So, I did my own research and downloaded some Winsock_FixXP program, and they I updated all my drivers / reinstalled all my XP restore disks and whatnot. Low and behold, my computer and internet are working. Correction: working *very* slowly. Literally, when I double click on my Internet Explorer icon, it takes at least 3 minutes for the window to appear! I have done the disk cleanup and defragmenter.... but I have yet to reinstall McAfee for fear that it will mess up my computer AGAIN....... any ideas???

A:Winsock Error From Mcafee?

Free protection solutions (just google 'em):AntiVirus - AVG FreeAntiSpyware - Windows DefenderFirewall - last freeware version of Sygate Personal FirewallAs for the slowness - download and try Firefox. It's free, and you can remove it once you're done testing (but I'd stick with it if I were you). http://www.mozilla.com/If Firefox works at a more reasonable speed, then it's IE that's hosed. You'll have to repair IE in order to fix it.If Firefox is slow also, then it's likely that the basic settings for your network are hosed (or that Windows has been corrupted).Try creating a new connection and see if that works.

3 more replies

Hello...installed Mcafee Virusscan 8.0 last week and just yesterday an error message popped up and now it won't run...I uninstalled the program and tried to install but the same message continues to pop up and won't allow the completion...Error 1920-"Verify that you have sufficient privileges to start system services"

Any help would be appreciate as I'm on my laptop and don't want to connect my desktop to the internet for fear of a virus with no protection..

Boatdriver..

A:Mcafee Antivirus Installation Error

Are you logged on as an administrator?

Orange Blossom

3 more replies

I get the McAfee error message [I]Error Getting Scan Progress [/I]each time I try to run a scan plus I have uninstalled and reinstalled and still nothing.

Now today all my McAfee update tries tell me to uninstall and reinstall the software.

Now I do have an option being I am getting this McAfee from AOL free but I can also get free Charter anti virus and wonder if I just went ahead and uninstalled the McAfees and installed Charters if this would solve the problem or is this more extensive than that?

Any ideas on what I need to do I have been fighting this for almost a week now?

Also I can run Eset scan and it comes up clean.

Mackoo

A:Mcafee Error Getting Scan Progress

16 more replies

Hi. I'm New Here And I Have Some McAfee Problems:

- The Parental Controls Are Not Working Correctly.

I Logon As An ADMIN And Open Up Security Center. Then I Click On Parental Controls, And It Just Reads "Keylogging Is Disabled." And Another Keylogger Error.

No Parental Controls. Nothing.

Help?

< Sam >

More replies

Can't see thumbnails to .avi's. Can't open them in WMP. Sound, but no picture in Quicktime. Downloaded Spybot Destroyer. No affect. Downloaded RegCure. No affect. What gives? Any help would be appreciated.

Text on screen as follows with WMP:

AppName: wmplayer.exe AppVer: 11.0.5721.5145 ModName: xvid.ax
ModVer: 0.0.0.0 Offset: 0003dd11

HJT Report:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 19:39:46, on 5/16/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\System32\Novell\XTAgent.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\McAfee\VirusScan Enterprise\EngineServer.exe
C:\Program Files\Network Associates\Common Framework\FrameworkService.exe
C:\Program Files\McAfee\VirusScan Enterprise\VsTskMgr.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\mfevtps.exe

More replies

Hi All, I cannot uninstall McAfee Virus Scan 7.02 with Integrated McAfee Firewall. I get Error 1721 "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personal or package vendor."

I tried to reinstall, repair, I also tried the mcafee help instructions for the manual uninstall of virus scan. Nothing works. Please help me, it's been all weekend! Thanks so much

A:Uninstall McAfee - keep getting Error 1721

maybe it will help but maybe not

i once installed a game and then uninstalled.

a while later i went to install it but it came up with

Repair - Modify - Remove

whichever option i clicked nothing would come of it.

I had to delete the Registry key of that game and then it worked :]

so, maybe its something to do with a registry key. but maybe not =P

2 more replies

Having all sorts of problems with this ever since I got a update from them yesterday -

When I log on on I get

Line :238
Char : 2
Error: Object dosen't support this property or method: gobjReg:RegQueryValue

Code : 0

URL: mcp://D:\Mis\eng\misins.dll::default.htm

I uninstalled Macfee, and this is what I get when I try and reload it - I know you guys might think its pants, but I need to have something in place....

More replies

I subscribed to McAfee Clinic a few weeks ago and with it you have to install Active Shield. It worked great until the first time I was notified of an update. When I went to update it a window popped up saying that there was an error in it or that it was installed improperly. So I uninstalled it and downloaded it again. This has been done several times -- uninstalling and downloading -- but each time the same window pops up. I have sent two e-mails to McAfee and have had no response from them.

Can anyone help with this problem? If not, I guess it's back to InoculateIt.

TIA,
TXRosebud

A:McAfee Active Shield error

I'll be honest with you. I really don't like or suggest McAfee to anyone. You may also find now that it's a pain in the butt to uninstall. If you want a good reliable AV then I highly suggest <a href=http://www.antivirus.com/pc-cillin/> PC-Cillin</a> by TrendMicro. It's easy to use and keep updated. McAfee AV if it's not causing problems now will definitely cause you problems down the road. It's real junk and McAfee is well known for bad updates that cause your PC to freeze and/or crash.

[This message has been edited by bhesson (edited 02-22-2001).]

2 more replies

hello
i wud like 2 bring into ur notice dat am unable to autoupdate my mcafee(8.5OI)
unable to find a valid repository
ur quick intervention wud be appreciated!!!!!!!!
thanx n regards.

More replies

i have a problem wiht mcafee professional edition that i just installed.. it is an older version
but whenever i start it i get an error and it shuts down.. any advice on how to get it running..

A:Solved: McAfee shut down error

7 more replies

I was using my computer when McAfee Anti-Virus upgraded itself automatically. Unfortunately, it malfunctioned and caused Internet Explorer to crash. When IE continued to crash now and then, I suspected that McAfee was causing it, so I reinstalled McAfee and IE is working fine now. However, I got the following error from Action Center before reinstalling McAfee. The computer seems to be working fine now, although I can't see some images on websites such as Google Streetview. Please help.

Description
Faulting Application Path: C:\Program Files (x86)\Dell\Dell WWAN\WMCore\mini_WMCore.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: mini_WMCore.exe
Application Version: 0.0.0.0
Application Timestamp: 4b0e5dd8
Fault Module Name: unknown
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 00000000
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 6153

A:McAfee Anti-Virus Error

Your best first option at this time is to uninstall McAfee and use one of the free AV's, I prefer Microsoft Security Essentials but there are others.

Ken

9 more replies

Hello friends,

I'm not a computer girl and I have no idea what I am supposed to do here. I've downloaded Mcafee on my home office computer with no issues. Now I am attempting to download it to my laptop and get debugging errors. (See! I don't even know what THAT means!)

I see that there is another question EXACTLY like mine, but I didn't know if I should follow that recommendation or not. Here is the situation.

I'm using Windows XP. I'm trying to download Mcafee; I'm in Mcafee Download Manager and "Just in Time Debugging" keeps popping up wanting to use Microsoft Script Editor. I'm not even sure what it is, but it won't let me exit and if I do it pops up again, and I can't "ignore" or "continue," only "break." I got it to stop and held my breath but it stopped again.

Then it said,

Help?!?!? I am using Mcafee cuz it just seemed easier for a non-computer-brain!!! Thank you!

Hi and welcome to TSG.
1st thing to try.
Tick..Disable Script Debugging.

2 more replies

Whenever I run McAfee virus scan, a recive the following error message and my scan window closes. Pl healp
AppVer: 4.0.0.73 ModName: msls31.dll
ModVer: 3.10.349.0 Offset: 00006c60

More replies

Hey,

I got a 90 day trial from mcafee with my comp, and now it expired. Once in a while I get a pop up windows error message that says 'mcafee has detected a virus, it is recommended that you run mcafee online and scan for viruses'. I used a free scanner and no viruses were found. I think mcafee is trying to scare me into paying for their software which is \$30/yr or something... is this some kind of spyware that I should remove? how would i go about doing that?

thanks

A:mcafee popup error message

As the package has epired it is of no use to you, uninstall it as it could be giving you a false sense of security.
Try this AVG free updatable version it works well and is of course FREE !
http://www.grisoft.com/us/us_dwnl_free.php

1 more replies

Hi, I wonder if any one can help me. My laptop operates on XP and is protected by McAfee Internet Security Suite 2005. However I get a strange error message regularly and I think that it may be linked to McAfee. The message is headed "Client Security Solutions" and reads "This instance of cssauth.exe cannot start because of an initiallization error". Can any one tell me what is the source of the error message i.e. McAfee or something else and whether this error message is big trouble - it doesn't appear to have an effect in itself. Laptop still continues working.

Thanks

A:Strange Error Message - McAfee?

11 more replies

A week ago something happened. Not sure what. Now the McAfee McShield service won't start, so that doesn't work. Also, a window pops up when I boot that says error in the title bar and has a yellow exclamation mark, but there is no other information given. Task Manager says csrss.exe is causing the error window to open. Everything else seems to work. Tried multiple completely removal and reinstall for McAfee and everything listed in the Preparation Guide. Thanks in advance! Here's log:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 5:13:49 PM, on 8/31/2008Platform: Windows Vista SP1 (WinNT 6.00.1905)MSIE: Internet Explorer v7.00 (7.00.6001.18000)Boot mode: NormalRunning processes:C:\Program Files (x86)\Common Files\InstallShield\UpdateService\ISUSPM.exeC:\Program Files (x86)\Common Files\Nero\Lib\NMIndexStoreSvr.exeC:\Program Files (x86)\CleanMyPC\Registry Cleaner\RCHelper.exeC:\Program Files (x86)\Microtek\ScanWizard 5\ScannerFinder.exeC:\Program Files (x86)\Project Lab\DDS\DDS.exeC:\Program Files (x86)\Java\jre1.6.0_07\bin\jusched.exeC:\Program Files (x86)\Razer\Reclusa\razerhid.exeC:\Program Files (x86)\Razer\Reclusa\razertra.exeC:\Windows\SysWOW64\CTHELPER.EXEC:\Windows\SysWOW64\CTXFIHLP.EXEC:\Windows\SysWOW64\CTXFISPI.EXEC:\Program Files (x... Read more

A:Error At Startup And Mcafee Virusscan Won't Run

Please, post a new Hijackthis log.

1 more replies

Hello. I need some help, I tried to fix this but I am going nowhere.

Problem:
I can not get a full virus scan complete - the system reboots in the middle of it. Various error messages included at minidump error, and then a "serious system error". I read the Microsoft forums and tried to edit the Startup and Recovery tab of System Properties. Not sure if that did anything.

System:
I am running Windows XP, all service packs installed. I use Registry Mechanic, Spyware Doctor, and AdAware religiously.

Diagnostic Results:
I ran System Informtion and Hijack This.

Here is my System Information. I ran this Windows feature to diagnose.

7/10/2005 8:04 PM Application Error Faulting application SR_Service.exe, version 54.0.0.132, faulting module msvcrt.dll, version 7.0.2600.2180, fault address 0x00037094.&#x000d;&#x000a;
7/10/2005 8:49 PM Application Error Faulting application explorer.exe, version 6.0.2900.2180, faulting module , version 0.0.0.0, fault address 0x00000000.&#x000d;&#x000a;
7/10/2005 8:50 PM Application Error Faulting application drwtsn32.exe, version 5.1.2600.0, faulting module dbghelp.dll, version 5.1.2600.2180, fault address 0x0001295d.&#x000d;&#x000a;
7/11/2005 9:34 PM Application Error Faulting application iexplore.exe, version 6.0.2900.2180, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x000122ba.&#x000d;&#x000a;

Here are my HijackThis results:

Here iLogfile of HijackThis v1.99.1
Scan saved at 10:1... Read more

A:XP Rebooting error, McAfee, minidump?

7 more replies

when i was tryed to uninstall the mcafee firewall it showing me this error and result of this i can't remove it .

A:mcafee error 2715. f1277_hhupd.exe

7 more replies

I hope someone can help with this issue it's driving me nuts. A family members Laptop (Toshiba Satellite - Running Vista)
has a problem on startup with what looks like a bad Uninstall.

When started & reaching desktop after logging on they get a Error pop up saying Mcfee Security Center (The Standard RED CIRCLE WITH WHITE X) & the wording - Application Resources could not be loaded successfully. Please Rienstall McAFee Security Center.

The McFee Logo is shown on the taskbar when this message is open also.

To say it's causing an annoyance would be an understatement. I have used several programs tring to find a Start Up thread, but can find no link to McAFee unless it's hidden.

There are remnants of the program in C/program files/McAfee. I have tried to delete these but cannot.

There is also a link (Icon) in the welcome center window on start up offering 30 days free McAfee protection, could this be causing an issue. After shutting down the error pop up, the computer does not always load The Welcome Centre either (which the family member is annoyed about).

They said there was a problem when they tried to uninstalled it (it froze midway by the sound of it, something caused a problem when doing it, may have been a power dip).

If there is anyway I can stop this pop up at start up I would be most gratefull.

A:Problem With A Mcafee Error On Start Up..

Use the free tool on this page to remove the remnants of McAfee: http://service.mcafee.com/FAQDocument.aspx...083&lc=1033

1 more replies

Hi everyone,

About 3 weeks ago I noticed my Inspiron 6000 slows down considerably about a 1/2 hour after booting up. Around the same time I started getting a windows pop-up every time I rebooted, saying "Windows cannot find 'c:\PROGRA~1\McAfee.com\agent\mcupdmgr.exe Make sure you typed the name correctly and try again".

The things is I had deleted McAfee a long time ago. I contacted both Dell and McAfee tech support. They had me delete all remaining McAfee programs from various caches. I also went under MSCONGIF and unchecked an "oasclnt" entry for McAfee in startup menu, but every time I restart windows, the entry comes back!

Is the slowdown related to the McAfee issue? I would really appreciate any insights on this. TIA

A:laptop slowed down because of McAfee error

16 more replies

I'm a beginner at this stuff so bear with me as I try to explain what's happening. I am trying to install Napster. Everytime I do the install I get a registry error and the message to try installing again. I've done this so many times I can't tell you!

I thought I'd try Registry Mechanic to see if I could find out what the error was. I do the scan, and there's always one error that can't be repaired.

I also have problems with McAfee. I can't get it to work since I switched to Firefox. Could this switch from IE have anything to do with both these problems? If so, what do I do to go back to IE. I switched to Firefox because IE kept opening multiple browser windows... 20,30, and more in rapid succession. I though if I got rid of it I wouldn't have the problem.

I suspect that my problems are being compounded by my lack of knowledge and continued attempts to "fix" things.

Thanks for any suggestions.

Pat

A:registry error and also McAfee problem

Multiple browser windows opening rapidly is symptomatic of more widespread problems than those associated just with I.E. Spyware and adware come to mind even if those windows are not loading up with anything. Its also possible to mung the registry quite easily as well so without looking its hard to tell.

If you feel like doing some troubleshooting, use or create and use a new user account and just note the behaviour of programs and the operating system when you use the computer from that account. This will give you an idea of how many problems are related to your old account and how many are system wide.

1 more replies

Hi guys, been scanning these forums and you all seem like a top bunch, so I come to you in desperation!

For the last few weeks, I have been getting fatal flaws occuring on my system. When I reboot, Microsoft tells me its the result of McAfee firewall.

Now I dont use this anymore, so I went to uninstall it and I get the usual cannot unistall blah blah install.log is corrupt or something.

So anyway I decided to hell with this and scoured the net for programs dedicated to this issue, including the covetted Unlocker. I have tried umpteen programs to no avail, every one of them is telling me that it is unable to help, and every hour or so my system shuts itself down with a fatal error.

The situation is getting concerning since I have a dissertation to write very soon and if im halfway through a chunk of text I'll risk losing it.

Now Im not amazing with PCs as you can probably tell from this post, i dont have all the info at hand since im using a works pc to type this up, so i couldnt tell you the error codes etc etc.

Off the top of your head can anyone suggest a solution. All help and responses would be greatly appreciated.

Cheers.

A:Serious error caused by McAfee Firewall

Have you tried uninstalling the program in safe mode? You could also try the mcafee uninstaller.

http://service.mcafee.com/FAQDocumen...107083&lc=1033

5 more replies

Hello,

I have Windows XP with Mcafee virus protection and Firewall. The virus software fails to update because it can not connect to the Mcafee site. I use windows explorer 8 and can access all sites except Mcafee. Do I have a virus or malware? Need help to remove. I contacted Mcafee and they had me download their Stinger tool, but that did not find any virus.

Thanks.

A:Mcafee Virus software update - unable to access Mcafee site

5 more replies

this is quite a long story so thanks for reading it.

hi, i need some help with some issues ive been having over the last couple of days. im going to explain everything,some parts may be irrelevant but i dont want to leave anything out.

On the 29th of september whilst on a website java 6 popped up as if to install then disappeared. my mcafee notified me it had removed a trojan ,after that it kept popping up to tell me it had removed a trojan and i continued viewing the site, i pressed stop notifying me presuming it would continue to remove trojans. later i tried to start a game i have, called minecraft, an error popped up saying couldnt start java virtual machine(maybe this isnt that relevant and could be an entirely different problem but it happened after the trojan incident and was working fine before).
i decided to restart hoping all would be well but when i shutdown windows notified me i had updates to install, i said ok. instead of saying "windows is installing update 1 of 5" etc, it just said windows is shutting down and froze. i forced a shutdown by holding the power button and when i restarted my start bar and icons where missing.

i started again in safe mode and tried restoring my pc to earlier that day and restarted again. the icons where not there nor the startbar and task manager was "disabled by my administrator" i went back to safe mode and ran superantispyware which found some horrible things like "disabletaskmanger" some trackin... Read more

A:google redirect, mcafee disabled - mcafee customer service is awful

Hello,Please follow the instructions in ==>This Guide<==. If you cannot complete a step, skip it and continue.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Please include a description of your computer issues and what you have done to resolve them.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.Orange Blossom

3 more replies

I just had some terrific help from TSG and cleaned up my HiJackThis log, and ugh, I just found another problem with my PC.

When I try to go to www.mcafee.com or http://us.mcafee.com/root/redirects/support.asp?affid=332-05 (this is the Mcafee 'Support' button link), I receive the IE error message that the page cannot be found.

Looking into this further, when I start up the PC, the McAfee logo color is red, the McAfee security splash appears listing the active services, and then a moment later, the McAfee start up logo color changes to black, and is disabled.

I've run McAfee Update, but I don't think it's been updating successfully because the security index indicates that its detecting an older version.

I searched the TSG forums and wasn't able to find a solution...

Some back story which may be pertinent - I had NAV installed and it got corrupted, symptoms included disabled virus scan at start up. The PC was not able to connect to the internet at all. I took the laptop to a tech shop last week, and they were not able to reinstall NAV successfully. They installed McAfee instead.

I'm running on Windows 2000 SP4, IE v6, McAfee VirusScan 2004 v8. I'm also running ZoneAlarm with the privacy option disabled, and have run the comprehensive Ad-Aware scan.

Any help would be most appreciated!
Jackie

More replies

Hi,

I've had several occasions when my McAfee says that the e-mail I've just sent can't be sent, but it still appears in the Outlook 2003 Sent Items folder. **Have these e-mails really gone?** This is not something I can test with a message to myself as I never know when it's going to occur...

(I've now configured McAfee not to scan outgoing messages).

I sent a very important e-mail today and got the McAfee protocol error message again. I can't write to say "Did you get my mail?" as I was submitting a song for a project in the States, and it would look really bad if I e-mailed them with that message? I mean, that's *really* NOT good business, is it? See my position?

What I'm asking is: When messages appear in the Sent Items folder, have they really gone? Hoping someone can help...

Thanks,

John.

A:Outlook 2003 McAfee protocol error

McAfee is a pain in the a**.i used to use nsw until i started reading these tech support guy forums.i have 8 computers hooked to my dsl and started with the older desktops using avg free.as i started seeing how good avg is 1 by 1 i dumped nsw and now use avg on all my pcs.it does a great job.the computers are much faster than with nsw.i donate every year to tsg and as soon as i go back to work i am going to donate to avg.my son just bought a new dell xps laptop which had 90 days of McAfee for free and the first thing he did was remove it and install avg.it is a great anti-virus program and does not suck up resources like some of the well known programs.

2 more replies

I have tried to run Super Anti Spyware and it will go for awhile and crash. I can turn McAfee on but it turns the real time scanning off. I ran SDFix in Safe mode but when I return to normal windows it will freeze as SDFix tries to fix. I believe I have an error in the System files as it loads in the beginning of computer start up. I though I had fixed a problem in December but something else is added or it came back.
I have a good understanding of computer maleware/spyware removal as I have been taking care of our home computers since we have owned them. I know how to reg edit and can ususally find a fix to take care of our computer issues. I do have hijack this and Malwarebytes and have tried to use both of those to help me.
hijack logs said McAfee had a bunch of files missing.
Malwarebytes found Trojan.Packer.Gen and this time Trojan. Agent
Tried to run/install Ad_Aware but it said it was missing MS Vision C++ 9.0
SDFIx noted apps\process and several files missing

I apologize if this is too much information. The computer has been off and on the network & turned on and off and restarted numerous times. I have been working on this problem for about 2 week off and on. At least this time I was able to get the logs for you and get this emailo send. I hope

A:Win Xp McAfee scrip error & comp freeze

Double click DeFogger to run the tool.
The application window will appear Click the Disable button to disable your CD Emulation drivers Click Yes to continue A 'Finished!' message will ap... Read more

30 more replies

Hello:

I would appreicate any help in resolving the following error message:

AppName: uni.exe AppVer: 3.2.6000.0 ModName: unicore.dll
ModVer: 3.2.6000.0 Offset: 0000504d
Using Dell Windows XP Home Edition
Program works fine until I try using Building Smartlinks Database.
Thanks

[email protected]

A:McAfee Quick Clean 3 Error Message

http://forums.techguy.org/t138553/s8db4df7c329f40eccac024420fe37955.html

1 more replies

Hi,

I used to subscribe to BT Internet with their free Norton Internet Security. Recently I changed my Broadband subscription to Sky which comes with free McAfee Security for 12 months.

Initially I had alot of issues with removing Norton and in the end used the Symantec Norton removal tool to clear it from my PC to permit me to install McAfee.

I have installed McAfee but the Security Centre shows Action Required on Computer and Files Security. There is a Fix Now button available but when I try this I receive the error: One or more problems cannot be fixed because of an error. The problems are listed as: Real-time scanning is disabled and Spyware and potentially unwanted program scanning is disabled.

The HELP page says to do this manually using the configure button - unfortunately this is not available on screen.

THe McAfee help centre said to uninstall and reinstall McAfee I did that too but same problem.

The next thread I read was for this forum and so I have followed the instructions and attached the files the text from the DDS is below, grateful for any advise I am close to the point of removing altogether and installing AVG instead.

DDS:

DDS (Ver_09-02-01.01) - FAT32x86
Run by Jackie at 13:43:22.20 on 09/03/2009
Internet Explorer: 7.0.5730.13

============== Pseudo HJT Report ===============

uStart Page = hxxp://www.sky.com
uSearch Page = hxxp:/... Read more

A:McAfee Real-time Scan error

Hello and welcome to TSF.

Apologies for the long delay in response. Since it has been a while you posted, if you still require assistance, please provide us with a new set of logs in a new topic as this one shall be closed.

New Instructions - Read This Before Posting for Malware Removal Help

1 more replies

Our computer was affected by the McAfee error last month, then we aquired the AKM antivirus pro 2010. Have been unable to follow through with downloads since the svhost is not working. Recently I turned it on to try to save data, and all I can get is the Dell page which looks like it is slashed through the letters.
Cannot start in safe mode, and keyboard is not operational. Have tried to reinstall windows XP but cannot get on boot page, or any other page other than the Dell start page.
Any ideas? or is it time to throw it away?

A:Windows XP / McAfee error/ antivirus infection

You installed a malware program, see http://www.bleepingcomputer.com/virus-remo...ivirus-2010-pro.I will move this to the appropriate malware forum, where someone will assist you.Louis

1 more replies

Hello:

I would appreicate any help in resolving the following error message:

AppName: uni.exe AppVer: 3.2.6000.0 ModName: unicore.dll
ModVer: 3.2.6000.0 Offset: 0000504d
Using Dell Windows XP Home Edition
Program works fine until I try using Building Smartlinks Database.
Thanks

[email protected]

More replies

Hello:

I would appreicate any help in resolving the following error message:

AppName: uni.exe AppVer: 3.2.6000.0 ModName: unicore.dll
ModVer: 3.2.6000.0 Offset: 0000504d
Using Dell Windows XP Home Edition
Program works fine until I try using Building Smartlinks Database.
Thanks

[email protected]

A:McAfee Quick Clean 3 Error Message

http://forums.techguy.org/t138553/s8db4df7c329f40eccac024420fe37955.html

1 more replies

McAfee Virus Scan installed on Dell desktop running XP Home Edition. When attempting to schedule weekly scan get script error "Data area passed to a system call is too small". McAfee FAQs indicate it is a recognized Microsoft issue and that user should contact Microsoft for a patch. I tried that to no avail.

I deleted a few tasks that appeared to be duplicates from the Task Scheduler and rebooted, and the problem still exists.

Any suggestions?

More replies

windows XP Mcafee security suite 8
virus scan will not enable and the error message is 'some components of activeshield are either missing or might not have been installed properly
Ihave uninstalled and reinstalled but still anable to solve this problem - any advice please

A:Mcafee activesheild component error message

Hi, Do you have SpyBot Search and Destroy installed? I've fixed a problem with McAfee Security suites with SpyBot- a Redirected Hosts file entry was the problem.

The problem I saw would not allow a connection to the McAfee update/sign in page where you register and log in to get updates. Without logging in, the suite would not run, and the updates of course are needed. Can you get to the Update site and connect there?

SpyBot S&D is free, and here: http://www.majorgeeks.com/SpyBot-Search_&_Destroy_d2471.html

One other good program, a free trial version, is AVG Antispyware, which is not AVG Antivirus, so it should not conflict with McAfee that I know of. You could temporarily turn off protection in McAfee to run any other app as you probably are aware.

3 more replies

Using Win98SE and cannot install McAfee Internet Security (the '06 version)

I get this:

Error:

Lin3 63
Char: 2
Error: "Object doiesn't support this property or mehod "gobjMcApp GetMcAppUpdate"
Code; 0
URL: mcp/G:\MIS/ENU/MISINS.DLL unintall.htm

What is wrong and how do I fix this???? HELP!

A:McAfee scrpit error/Privacy/won't install????

are you sure 06 is for win 98 did you check the specs?

2 more replies

I have installed McAfee Virus Scan Enterprise 8.5.0i with installed patches 7 on my PC (Windows Vista Home Premium SP2).
The virus scan is successfully installed on the machine and works fine (After installation I had to update windows defender as well because there was a warning from security centre coming).

The only problem is whenever I shutdown/restart/logoff my home PC it gives a message "explorer.exe Application error. The memory at..... could not be referenced...." and I have to press ok button to complete the operation.

It is cause of great annoyance. Any help is highly appreciated. I have run sfc /scannow, everything seems to work ok. If I unstall Virus Scan it is fine but I want to keep it as I have only this McAfee Virus Scan Enterprise as a good antivirus software. I hope other members in this forum would help me in resolving this issue

Thanks

Fayyaz

More replies

I'm Facing the problem while inserting the Mcafee Virus Scan Plus CD into the Drive . It's showing CDsetup.exe module error. I already remove the previous mcafee product completely. Then I'm unable to install the upgraded version. Plz send the information soon.

More replies

I keep getting an error saying McAfee Email Proxy has shut down. Also, I'm getting another error box over and over every few seconds saying "one or more email messages cannot be sent". When I click "View the log" these are emails not sent by me or to anyone I know. Appears to be spam. This is making my computer very slow. I've run system scan and it found nothing, have also run spybot and adaware and has not helped. Any advice on what to do? Thanks in advance.

A:McAfee Email Proxy Shut Down Error over and over

This is most probably a rootkit that is attempting to send emails via your pc , is there anyway you can contact us on another machine while disconnecting this one as this should stop any emails being sent , hopefully stopping the slow machine and then we can start informing you what to do

31 more replies

Everytime I boot up my computer this box pops up over an over again:

Mcafee Active Shield has found a suspect file on your computer.Mcafee strongly recommends that you scan your computer now.

I have scanned and nothing has changed

I use Aol 9.0 security edition....

Below is my log from HijackThis

HELP!!!!! I can not take it any more. I have tried everything....

Logfile of HijackThis v1.99.1
Scan saved at 8:53:43 PM, on 1/7/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltsmon.exe
C:\Program Files\Common Files\AOL\1136864626\ee\services\safetyCore\ver210_5_2_1\aolavupd.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\CA\PPRT\bin\ITMRTSVC.exe
C:\PROGRA~1\mcafee.com\ANTIVI~1\mcshield.exe
C:\Program Files\mcafee.com\personal firewall\MPFService.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\PRISMSVR.EXE
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\wanmpsvc.exe
C:\Program Files\mcafee.com\antivirus\oasclnt.exe
C:\Program Files\mcafee.com\antivirus\mcvsescn.exe
C:\Program Files\mcafee.com\personal firewall\MPfTray.exe
C:\WINDOWS\system32\dllhost.exe