Tech Problem Aggregator

Lack of printed script width

Q: Lack of printed script width

Gentlemen/Ladies,I?m not sure where to post this question so I?m plumping for this forum, knowing that it will be redirected if it is in the wrong place.Occasionally, when I open a website, its pages are too wide for my monitor and I have to scroll across to the right to see what is hidden from view. When I go to print the pages, I end up with just threequarters of the width of the script.I am using an HP LaserJet 1010 printer.I do not have this problem with all websites. Today, the offender is - http://www.explorenorth.com/whalers/featur...lecaptains1.htmWill the pages of this website be partly displayed on the monitors of all of the people who open it , or are my own ?settings? to blame. Please, how can I overcome the problem ?Yours sincerely, oldsoldier

A: Lack of printed script width

Hi oldsoldier.I get the same thing when viewing that page. My screen resolution is set to 1024X768. I found that if I went to View>Text Size and set it to Smallest the page almost fit. Have you used Print Preview in the File menu to see what the page will print like? You can also use Page Setup in the File menu to adjust the margins etc. before printing.

3 more replies
Answer Match 58.8%

I have an Access database used on daily basis to enter and print the maintenance work order in a report format. I have assigned a command button to print the required record. On clicking the button in the Form, a parameter query will run asking the user to put the record number to proceed. Once the correct record number is entered in the parameter text box, the report is previewed and the user click on the print button to print the same.

My question is as follows:

Is there any method to find out the record i am going to print now was already printed before? A kind of record keeping for the printed records.

Also, a message box should warn the user saying incase if the record was already printed, The record was previously printed, do you want to continue printing again?

Please tell me a way to perform the above in my Form.
Thanks,
Hash
 

A:Record keeping of the printed records & warning user when printed more than one time

could't you just add a field in the record for printed?

Then if printeed true, show warning, else show printable form.
 

2 more replies
Answer Match 57.96%

Based on CERT, ISC, and other warnings below, the capability for security software to interrogate embedded Unicode characters in HTTP requests could be a serious exposure that needs to be patched by several vendors? So far, there are no known in-the-wild attacks: Full-Width/Half-Width Unicode Bypasses HTTP Scanninghttp://www.kb.cert.org/vuls/id/739224 http://isc.sans.org/diary.html?storyid=2807http://www.gamasec.net/english/gs07-01.htmlhttp://www.cisco.com/warp/public/707/cisco...4-unicode.shtmlhttp://www.frsirt.com/english/advisories/2007/1803http://secunia.com/advisories/25285/What is Unicode?http://www.unicode.org/standard/WhatIsUnicode.htmlThe US-Cert has a vulnerability note out that describes how Full-Width and Half-Width Unicode encoding manages to bypass many HTTP content scanning engines (739224). This would allow remote attackers to hide malicious HTTP traffic by encoding it and have it slip happily past your IDS/IPS. This isn't an exploit itself, but allows exploits that would normally be detected (or blocked) to get through your IDS/IPS undetected.

More replies
Answer Match 57.96%

Run time error 8542 report width is larger than the paper width

this error appears when i operat some report in run time mode from program programmed using VB6 and Access 97

note thatprobel happen to some xp systems and dose not hapen with other Xp systems

i need solution for that problem

Osama Ghandour
 

More replies
Answer Match 57.12%

Guys, strange issue here, started lately - not sure when exactly, though, probably a couple of weeks maybe four.

I can't make a window wider than about one screen width - 1920px - Windows just won't let me. (it can partially extend to other screens, but the total window width remains)
It used to work, I sometimes look at data where a 4-5000 px wide view is beneficial.
I'm using the 3 screens as one desktop via "nvidia surround", 5760x1200

Anyone got any ideas?

(and I'm sorry if I put this into the wrong forum, feel free to move it)

Thanks in advance!

A:Window width restricted to 1920px (one display width)

Thought someone might be interested, I've found the culprit: it was the nVidia driver.

nvControl panel -> Desktop -> Surround Displays

There are two options, the second one "Maximise windows across all displays" is the one.

2 more replies
Answer Match 40.32%

How I can change the name that appears at the top of email messages when I print in Outlook 2002?
 

A:Name at top of printed emails

6 more replies
Answer Match 40.32%

This is something that has been bugging me for a while now, and I've been unable to solve this problem. Perhaps someone out there can provide some guidance.

Sometimes, I'm unable to print things (such as online coupons) because I'm told that my printer is set to "Keep Printed Documents." I've tried disabling this setting via the Advanced tab under the printer's properties. However, when I do this, click Apply then OK, and close the tab, the setting automatically reverts back to "Keep Printed Documents". Does anyone know why this is happening? It's sort of frustrating to not be able to set the printer settings the way you choose.

I appreciate any tips/suggestions you might have. Thanks!

Bubba
 

A:Keep Printed Documents

9 more replies
Answer Match 39.9%

Other than dogging the print preview, and struggling with the size in any pertinent image editing software, has anyone found a reliable way to limit or control the size of a printed web document?
to wit:
I scanned an odd shaped document, 3x8" to email to myself at another site, and the printed form was big enough for two pages. What a waste.
I print receipts regularly and they, 99% of the time have a "trailer" on a last page that has stuff like web site address or URL, a Secure Website emblem, or other, clearly unnecessary printing. My introduction to Windows word processing (WordPerfect) had, and I still use, a "makeitfit" command. Invoking such a command AUTOMATICALLY when printing from the web seems like a simple, brainless way to conserve paper...it'll give me a fractional font (e.g. 11.9 vs. a 12) and would prevent the idiotic tendency of a printed page to only have the leftward 80%, l which leaves off the important stuff like the prices...(you gotta print landscape to avoid this)
And I thought a computer was to make life easier, boy was I ever misled)
 

A:printed size of web documents

The problem is that web pages are usually coded to make them look good on screen, and that tends to make them "unfriendly" when printing.

Web pages designed for printing do exist, and it works well in those (few) cases.

Cutting and pasting into a word processor is sometimes the only workable solution.
 

2 more replies
Answer Match 39.9%

Don't print much multi page output, so am NOT sure when this problem began.

Originally, the pages on my HP DJ855C were printed as expected: page-1 first, then page-2, etc; this resulted with page-1 being on the bottom of the stack. Depending on the application being used, there was often a Print-Order option available for Back-to-Front printing so that the last page would be printed first and then page-1 would be printed last and be on the top in the stacker.

NOW, things seem to have reversed:
If I do NOT ask for the Back-to-Front, then I seem to get it anyway (i.e., page-1 last and on the top). but if I want the original order (i.e., page-1 first and on the bottom) then I must use the Back-to-Front option.
It seems as though the default has become Back-to-Front and then selecting the option for Back-to-Front re-reverses the order and the result is Front-to-Back.

Possibly this reversal happened when I went to Win/XP; possibly it happened with the installation of some piece of software.

Q. Has anyone else had this exxperience?

Please tell me where I might change some parameter to make the option of Front-to-Back actually print the page-1 first like it did originally?

Any advice apprecaited.

Thanks,,

A:Order of Pages Printed

Digger,

Go into your printers and faxes options off of your start menu.

Select your printer, right click the mouse and click on printing preferences.
On the features tab at the bottom there is a option for start printing from last page. If there is a check mark in the box next to it, click there with the mouse and uncheck it and then click on apply and ok and you should be all set after that?

1 more replies
Answer Match 39.9%

I have the names Charlie Lori Jo, Printed in the top left hand corner of everything I print.
I don't know how it got there, and dont know how to get rid of it.
Can you help me?
Chuck.
 

A:Solved: Printed name on paper

16 more replies
Answer Match 39.9%

I am unable to print pictures completely. I print them from Picasa on HP photosmart C4250. When I try to print, although the preview is correct, the printed result is not. Part of a picture will come out, or the image starts at the end of the paper and is therefore incomplete. Until now, everything worked properly.

soslow24
 

More replies
Answer Match 39.9%

I have searched to find an answer to this problem of faded pictures when printed from windows photo gallery. I have seen a few others having the same problem, but no solutions. I am hoping that someone now can help.

I can print pictures from other software on my computer, from the internet, etc, with great photo quality. When I print from Windows photo gallery they are very light and faded looking. I have made sure the adjustments are for my printer.

It seems that most of the people experiencing this problem had canon printers. Does anyone have a solution to this?

Thanks
Pam

A:faded printed pictures

I have found the solution to this problem, you need to untick the checkbox for "borderless printing", this is how to do it:

SOLUTION:

When you click print, go to Options > Printer Properties

Click on the "Page Setup" tab, then Untick the box that says "Borderless Printing"




I love Myriam the little bunny

1 more replies
Answer Match 39.9%

I scan a document( on a hp 1315 all in 1) that is 8.5 X 11.00 but when I print it it is 8 X 10.25
how do you get it the original size? I tried resizing it in photo shop but cant get it. I have vuescan but still wont print out 8.5 X 11.00 ???????????????/
 

A:Scanned document when printed out........

16 more replies
Answer Match 39.9%

When using my picture it! publishing....when I add a border to a picture it comes out distorted when I print them out. With no border it prints out great.

Any ideas why this is happening?
 

More replies
Answer Match 39.9%

I'm new here!

First I would like to say I'm a TBI survivor and I'm a male and 42 years old .
I was purchased an emachine computer with a Lexmark lasar printer,
Whenever I go to print something, be it a web site article or a personal document that was created using Microsoft Works Word Processor. Whatever is being printed my name appears at the VERY top and the city and state printed at the bottom.
I know little about computers so I'm trying to get an answer why this is being printed.
The only thing that I can come up with is MY NAME, CITY and STATE was somehow entered on this computer's Hard drive and is prints it because it's been entered by someone at the store before iyt was brought home and set up for me.

If there is someway that I can delete this info. being printed, PLESE tell me what to do EXACTLY!

Thank You!
Chaz-62

A:I'm new her! Why is my name, town and state being printed?

That's very strange, it sounds like a 'Header and Footer' has been set up with that info and is in your normal.dot template. (If Works uses such a template, I know Word does).
Try doing a Find (or Search depending on your version of Windows) for normal.dot and rename any found to normal.old. Then test the printing again. If there is a problem you change the names back again.

hth

3 more replies
Answer Match 39.9%

Hi all,

Well not sure if this is the right area for this but not really sure what the problem is.

When I boot my PC during the bootup dos stage I hear my PC making noises, it still boots up Windows 7 ok but as soon as I open something I get continious R type accross my screen, If I hit the caps lock it changes from R to r.

Thought it was my keyboard having the R locked down so tried to fix it, no luck. Changed keyboards with my spare one no luck. Disconnect all keyboards no luck.

So where is this R coming from, its impossible to us my PC at the moment as soon as you click somewhere (word, exel, Google etc) an R/r appears.

Any ideas where to start?
 

A:Continous R being printed in Windows 7

8 more replies
Answer Match 39.9%

Whenever I print out an email from someone, the resulting document prints my first and last name (Outook Express) in the top left corner. I would like to orevent this but have searched in the Options and cannot find how it got there or how to permanently remove it. Can someone please tell me. Thank you.
jy
 

A:My name on printed emails not wanted

It is using your user name for the header.
You can change this in the account settings.

Not sure if you can turn this off.
 

2 more replies
Answer Match 39.9%

The problem I am having is that when I go to print tax return forms from the IRS site or New York Tax Dept site, the form prints "short", that is, the last four or five lines of each page do not print.

You cannot save the data in these forms, they will only save as a blank form. Your only option is to print it.

However, although Adobe tells how to cure this problem ( by clicking File-Print and going down the menu which comes up to "printer scaling", then chosing "print to fit page", this only works if there is a
FILE menu on the left hand side of the page.

In these tax sites, the forms do not have a tool bar above allowing you to chose a FILE menu.
You can right click the mouse and chose PRINT, however it will print a cut off page.

SOOOOOOO ..how do I either:
1. Get a standard Tool Bar to appear on top of the form, on these web site pages, or
2. use some other device or method to print these documents to fit the page.

If any of you are about to suggest right clicking on the printer icon PRINTERS, in the control panel, forget it....my printer does not bring up anything about "Print Scaling".

Hopefully, some geek out there will read this and solve my problem. Thank you. 44 Guy

A:printed pages cut off at bottom

Every computerized tax form that I have seen...is available at the website of the sponsoring governmental agency...and reflects a printed version option which has resulted in everything being printed properly.

I'm not sure where Adobe figures into tax preparation.

If you are using a 3d-party app to do taxes...then the problem resides with the support for that application, IMO.

Louis

http://turbotax.intuit.com/support/iq/TurboTax/Install-Adobe-Reader/GEN12226.html

4 more replies
Answer Match 39.9%

I have Windows 98SE with a HP 842C Deskjet printer.
Does anyone know of any program that would allow me to see how many pages I have printed since the last ink refill?
 

A:Counting Printed Pages??

Bump
 

1 more replies
Answer Match 39.9%

when i tried to print photo from (user administrator)windows7 photo viewer there appear print picture windows without photo preview(seems busy) and after some seconds five repeated error messages "your picture cannot be printed because of this error occured" appear. It is working in user account Guest. printer and its driver is okay(updated). whats wrong with my windows 7 photo viewer? please help me

A:your picture can not be printed because of this error

From Windows Answers:






I believe it is a problem with the "photowiz.dll" file in system32. It is version 6.x.xxxx.xxxx. I found an older version of this file, had to change the attributes and permissions of the file to allow it to be changed. I renamed it with an "dlx" extension and then copied a version 5.1 photowiz.dll to system32 and the print wizard works again! The site I got the file from is: http://www.dlldump.com/download-dll-files_new.php/dllfiles/P/photowiz.dll/5.1.2600.2180/download.html



Try Googling your problem first. Hope that helps

7 more replies
Answer Match 39.9%

hello all,
Im using access 2010 and there is a print of a report like a certificate whenever needed. My office is requesting me to provide a report of all certificate printed including the date and to whom .
my only way to do this is to force users to enter a field print (yes/no) and from there the query "yes" and the report be printed.
Is there any way to do this without forcing the user to enter the yes/no. field.
Thanks
 

A:Try to record printed records

6 more replies
Answer Match 39.9%

I have 3 print queues that are retaining the printed jobs in the queue and every now and again the damn thing prints all the job again. I have checked that the keep printed jobs button is NOT checked/selected, but the queue acts ilke it is selected to keep printed jobs. I have 125 printer queues and only 3 act like this and they are set up identical to the others. I have reconfigured this twice on all 3 and they still act like they are set to keep printed jobs in the queue.

Anyone seen this and know of a solution, on the Microsoft site I am seeing posts but not a single reply about how to either run a job to clear them out a couple times a day or fix this so they act as configured. To NOT keep printed jobs in the queue.

Any help as always is much appreciated.

The race to solution is on, let's see who can figure this one out first.
 

A:printed job remain in queue

7 more replies
Answer Match 39.9%

Hello Team, When I am trying to select eqal (=) to button on which it is printed, it is not getting typed whereas when I am selecting some other button eqal (=) is getting printed. Please help me in solving this issue. Regards,Nizam

More replies
Answer Match 39.48%

Is there an easy way to speed up my internet speed with this windows 8 without affecting my Windows Defender as far as any automatic updates, I don't want to affect things like that. My computer skills are limited, just average. If this is best I make no changes I wont. I would rather have this 4 or 5 month old laptop slow rather than not working at all hahahahaha. Thank,s Chuck

A:Band Width

Unless you have a dedicated high speed fibre optic connection all of your own, your internet connection performance is not governed by the capabilities of you computer, as a computer. The slowest performing computer available can process data quicker than any normal domestic connection can deliver it.
 
Internet performance depends on how each link in a communication chain works. The chain is : computer to router; router to modem; modem to exchange; exchange to ISP's servers. The only one you have any control over is the first section. Wi-fi performance is affected by distance, materials between computer and router, and aerial position and quality - and these you have some control over. You have no control over the bandwidth your ISP is delivering unless it is significantly less than you were offered when you took out the connection contract - then you start nagging them or change provider (if that is an option).
 
Go to www.speedtest.net to run a check on the bandwidth you are being supplied with. For a one-off test there is no need to set up an account, but it is useful if you wish to log changes over time.
 
Chris Cosgrove

2 more replies
Answer Match 39.48%

Hi Everyone
Hope any one can help with this basic problem query?

I subscripe to MLB.com. I am based in the UK. To watch the basic game via the internet i need 750kps. Before i went on holiday i could watch a game on both computers without any problems -ie continous feed. I have just started to experience problems on my standing computer(Windows XB) in bedroom.

I only use one connection at a time, for example i dont have a game on downstairs and one running upstairs. One game on either upstair or downstairs.

I have a wireless connection for both.

Now...when i test the broadband speed...

The broadband width on my laptop(Windows vista) is 6000kps
The broadband width on my standing computer is 550kps!

1.Why?

2.The quality is magnificent on my laptop and awful/juddery/freezing picture on my standing computer.

Does this make any sense? Also now the stand alone computer seems to struggle accessing the internet/ signal connection to my router.

It has all just recently happened - as you can tell i am a novice. Any idea what i could do?

Cheers

Andy -Cleveland Indians Fan
 

A:Broadband width - for MLB

The broadband width on my laptop(Windows vista) is 6000kpsClick to expand...

Is that with the same router port and cable as used for the other computer? If not, make that test to help isolate the location of the problem.
 

1 more replies
Answer Match 39.48%

Dear all

Any help with this problem:

I have a HTML page in which all the content sits inside a table which is 100% wide.

When I view it in Internet Explorer 5, the table sometimes leaves a scroll bar width gap at the right. If I refresh the page it fills the gap. The problem isn't apparent in Netscape.

I know I could force IE to refresh itself but that would take twice the load time.

Any ideas?

Thanks in advance

Gareth
 

A:100% width tables and IE5

Any style sheet things going on in this page also? Are you defining any of the row widths with number of pixels?
 

3 more replies
Answer Match 39.48%

Taskbar tabs for open applications have reduced in width to icon plus first letter. Any ideas for correction?
 

A:taskbar tab width

Right click the taskbar then unlock the taskbar if locked. Hover the pointer over the taskbar until you see a double arroow then drag to size.
 

2 more replies
Answer Match 39.48%

In my new installation of Windows XP Professional, I see I can no longer a way to set the width of my taskbar. Is there a way to do it? Also is there a way to get XP to remember the settings?
 

A:XP taskbar width?

right click the taskbar and unlock it. simple fix
 

3 more replies
Answer Match 39.48%

Hi just bought and installed a 9500GT 512mb graphics card, I also got myself a DVI to HDMI cable. the native res for my monitor is 1440 x 900. i have the screen set at this res but the start button and the clock are half missing. Any ideas, i have tried different resolutions but 1440 x 900 is the best quality. The monitor is Hannspree XMS New York LCD Monitor with HDMI.

More replies
Answer Match 39.48%

Wondering if the width of a particular column (Name, type, total size, etc) can be permantly adjusted. I am tired of dragging the Details or Name column to more width so to see all information. It always opens a window in default at about 1 1/2 inches wide. Never wide enough to see all. Can anything be done to adjust all this? Thanks in advance. Regards Rick

A:Column width

Hello Musicis,

One of the methods in OPTION THREE in the tutorial below may work for this.

Column - Customize

Hope this helps,
Shawn

6 more replies
Answer Match 39.48%

The following pop up error message appears when I try to double-click on an external drive from My Computer:Windows Script HostCan not find script file "H:/FS6519.dll.vbs"I have posted my hijack this log. Any help would do, thank you.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 3:51:43 PM, on 2/2/2008Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\SYSTEM32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\SOUNDMAN.EXEC:\Program Files\Thomson\SpeedTouch USB\Dragdiag.exeC:\Program Files\Common Files\InstallShield\UpdateService\issch.exeC:\Program Files\Java\jre1.6.0_03\bin\jusched.exeC:\Program Files\iTunes\iTunesHelper.exeC:\Program Files\Yahoo!\Yahoo! Music Jukebox\ymetray.exeC:\Program Files\Last.fm\LastFMHelper.exeC:\Program Files\Yahoo!\Messenger\ymsgr_tray.exeC:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exeC:\Program Files\Alcohol Soft�... Read more

A:Displays Error: Windows Script Host, Can Not Find Script File "h:/fs6519.dll.vbs"

Welcome to the BleepingComputer HijackThis Logs and Analysis forum. My name is Richie and i'll be helping you to fix your problems.Apologies for the late response,as i'm sure you can appreciate we are extremely busy.If you've already recieved help at another forum and your issues have been resolved,or you're presently recieving help elsewhere then please let us know.If you have not followed the info in the link below prior to posting your log then please do so now:Preparation Guide for use before posting a HijackThis Log:http://www.bleepingcomputer.com/forums/t/34773/preparation-guide-for-use-before-using-malware-removal-tools-and-requesting-help/If you still require help,please post a new Hijackthis log into this topic in your next reply.Also post a detailed description of the issues you're experiencing.*Note*Post all reports/logs directly into this topic,not as attachments,thanks.

1 more replies
Answer Match 39.48%

I already tried to scan my computer with avg anti-spyware but i can't save the report. I also tried panda to scan my computer but it won't push through with the scan, i don't know why. the only log file i can give is from hijackthis.exe program. please please please help me regarding my present situation. Attached is my log file with hijackthis program:

Logfile of HijackThis v1.99.1
Scan saved at 3:06:06 PM, on 4/3/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16414)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exe
C:\PROGRA~1\Grisoft\AVG7\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVG7\avgupsvc.exe
C:\PROGRA~1\Grisoft\AVG7\avgemc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Viewpoint\Common\ViewpointService.exe
C:\Program Files\Analog Devices\SoundMAX\SMTray.exe
C:\PROGRA~1\Grisoft\AVG7\avgcc.exe
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\avgas.exe... Read more

A:I HAVE THE SAME PROBLEM...Windows Script Host:Can not find script file C:\autorun.vbs

Cookigal, I already tried to scan my computer with avg anti-spyware but i can't save the report. I also tried panda to scan my computer but it won't push through with the scan, i don't know why. the only log file i can give is from hijackthis.exe program. please please please help me regarding my present situation thanks....

Attached is my log file with hijackthis program:

Logfile of HijackThis v1.99.1
Scan saved at 3:06:06 PM, on 4/3/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16414)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exe
C:\PROGRA~1\Grisoft\AVG7\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVG7\avgupsvc.exe
C:\PROGRA~1\Grisoft\AVG7\avgemc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Viewpoint\Common\ViewpointService.exe
C:\Program Files\Analog Devices\SoundMAX\SMTray.exe
C:\PROGRA~1\Grisoft\AVG7\avgcc.exe
C:\Program Files\Grisoft\AVG Anti-... Read more

1 more replies
Answer Match 39.48%

Anything I print off the web or email says "Network + Job Functions" at the top of the page and the date at the bottom. Sure, I've been to websites pertaining to the job functions but I never saved anything with that name. How can it be printing at the top of any page?
If I print a document that I made and saved from Wordpad, not anything from the net, it prints fine with no header. I looked at the printer settings dialog box and it shows nothing with this title.
Thanks, Jim
 

A:Printed documents show same heading

If you are using IE, at the top of the page click on file and page setup and see what you have under header and footer. You probably need to change those.
 

1 more replies
Answer Match 39.48%

Fill color isn't displayed during normal viewing of a worksheet. When the worksheet is printed or print-previewed, the colors are visible.

Re-installed Excel, problem persists.
 

A:Excel XP - Can't see fill colors until printed

Go to your control panel and double click on Accessibility Options.
Click on the Display tabsheet and uncheck "Use High Contrast" then press OK to close that window. You should now be able to see color in your view mode.
 

2 more replies
Answer Match 39.48%

I have an HP Deskjet 920c that has worked fine until a few days ago. I tell it to print and the goes through the motions but nothing comes out. This means the printer icon is appears and says that it is printing but it does not. I have checked the power cords and the made sure that it is connected to the computer correctly. Any ideas?
 

A:HP Deskjet 920c says it printed but it didn't

13 more replies
Answer Match 39.48%

I have had my problem for some time and had a work around which is no longer applicable hence I get a white screen where message should be so I don't know what is being said.

My problem started about 6 or 8 months ago on Outlook Express. At that time I was using dial up and changed over to Earthlink.net with their e mail program Total Access. My problem immediately disappeared. One month ago I switched over to High Speed and the person doing the custom install saw I used Outlook Express so he reenergized (non computer word) the program. The custom installer saw my INBOX with about 30+ messages that go back a long way. EACH ONE LINE description was complete, meaning To: xxx,
From: YYY, Subject: ZZZ, and anything else that showns on the ONE LINE.

When I double click on one of the inbox messages I FIND MY PROBLEM! Everything that showed before is shown again, but now greyed out since it has to do with basics. HOWEVER, the text area (where the message should be) is 100% pure white. I have double clicked all 30+ messages and get the same thing,...a pure white screen.

I thought it might have something to do with installing SP-2 on my XP Home Edition BUT SP-2 was installed about 6 months ago and my e mail problem started about 8 months ago.
That is my problem! Can anyone offer suggestions?
 

A:No Outlook Express Messages Are Printed

Hi George-2

Welcome to Tech Support Guy Forums!

So if I understand correctly, you can send and receive emails ok.

The problem lies in that the messages you receive are blank inside?

If you run your mouse over the inside of the message, does anything show up in the highlighted/selected area?

Perhaps your fonts have a white color?

Are you able to create a new message and see the fonts inside?

Let us know.
 

1 more replies
Answer Match 39.48%

Hey, I have a person here that has the problem that drawings that she has in her documents dont print out. Ive tried turning off background printing still same, Ive tried printing it on my printer and that works.

Anyone have any idea on any settings or something I can change to make it work?
 

A:Images not being printed in Word 2002

Drawing objects (Tools - Options - Print) ticked?
 

2 more replies
Answer Match 39.48%

I have an Access report that includes a sub-report in whihc I would like to print the records on one row, rather than one column. So far, I have been unable to find a solution.

Example Record:

Job Number: 123456
Version(s): 001,002,003,004
 

A:Access Sub-report records printed on one row

7 more replies
Answer Match 39.48%

Other than using View>Text Size, is there anything I can do that may cause the print to be darker? I know that my eyes are beginning to grow weaker but perhaps someone knows a trick for me to use or an answer. The light print seems to occur on most web pages and very bad on my ISP webmail account. My signature will tell you I am using WinXP Pro and SP2. If all pages were as clear and dark as the print I am seeing while typing this thread, I would not be asking for help. As always, TIA
 

A:Solved: Pages Appear To Be Too Lightly Printed

7 more replies
Answer Match 39.48%

I have an Access database used on daily basis to print maintenance work order. Each work order is assigned with an auto field No. I have a commend button assigned to print each record in a report format. On clicking command button, i enter the record number to be printed and it previews the report and check for accuracy of data entered. Once checked, i click on the print icon to print the same.

My question is, is there any method to find out the record i am going to print now is already printed before? A kind of record keeping of the printed records. Also, the same method shall help me to find out how many times each record is printed?

Hope someone can help me
 

A:Record keeping of the printed records

8 more replies
Answer Match 39.48%

I doubt that I can post this question here but I assume it'll be removed if not.

I have an HP printer, 2540, wireless printer. Works fine.

I started to print a pdf file. Because it was a large file I choose the 'booklet' option, which prints 4 pages on one side, then, when everything of the even numbers (I think, not sure) has printed, you will get a message on the pc telling you how to replace the already printed pages in the printer so it can print on the backsides.

When I saw the first batch I decided I didn't like it. So when the message with instructions on how to replace the already printed paper, I went in the printer's menu, highlighted the name of the document and did 'cancel'. In this printer menu it now said it was 'deleting' the document. But it didn't. I waited about half an hour. I turned the printer off and back on. I closed the document. But still the printer menu said 'deleting'.

I opened the document up again, changed the settings for the printer (as in one sided, normal size) and accidentally hit 'print'. I then noticed that - in the printer menu - the 'new' document showed up above the one that still said it was deleting. But it still didn't print. I went in the print menu again and highlighted the new document and did 'cancel' and it did cancel it.

But the old document is still sitting there, 'deleting'. I can not get past that. Any suggestions wo... Read more

A:Cannot delete partly printed document from cue

There's a way to force these to delete, if you don't mind a little typing. You need to open a command prompt by running cmd.exe. If you're unsure of how to do that, tell me which operating system you're using and I can walk you through that. This should open up a black window, and you need to type in the following commands sequentially, hitting the Enter key after each command.
net stop spooler
del %systemroot%\system32\spool\printers\* /q /f /s

net start spooler
The first command stops the printing service, allowing you to carry out the second command, which deletes any jobs in the queue. The last command re-starts the printing service, and you can try running a test print. Once that's all done, you can just close the black window.
 

8 more replies
Answer Match 39.48%

I have printed photos from e-mails before, but never had a problem with moire patterns. This time I have a fine vertical line pattern that is not clearly seen unless you have glasses on that magnify them. Unfortunately, I wear glasses that bring them out. What can I do to prevent or get rid of the moire? Any ideas? Thanks, lilart
 

A:Moire from printed e-mail photos

It likely just a matter of the resolution of the email derived image vs the resolution of the printer. Does it happen with every image or just the lower resolution ones from the emails?
 

2 more replies
Answer Match 39.48%

I am so hoping someone knows the answer to this very perplexing problem... I thought it was my printer so I bought a new one and I have the same problem. I print a picture of my granddaughter, who has these wonderful chubby cheeks.........until it is printed and the chubby cheeks are gone. She has slimmed right down...... lol I have been struggling with this problem for quite a while now, have asked everyone who comes within two feet of me and no ones knows how to fix this or what is even causing it. I know someone here will know. I have never had a problem that this site has not been able to fix for me. : ) Thanks, in advance.

Oh yes, and new printer is an Epson 835 al-in-one and my old one is an HP photosmart 2575
 

A:Solved: quality of printed pictures...

16 more replies
Answer Match 39.48%

Problem: Green Cast on Images being printed
Editor - Elements Version 7 & Windows default viewer
Printer R285
Colour Management:- every variation tried

My Neighbour has a Epsom R285 http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Stylus-Photo-R285 printer, his had it a few years.
I have recently changed his PC to a Windows 7 desktop and installed all the drivers. The Printer worked fine, but yesterday he was getting a green colour cast on all images
I checked the head alignment, nozzle set-up and cleaned the heads
Checked with windows default viewer, and printing from that application - same problem
Checked all the Colour Management, ICC, settings etc - tried without Management, sRGB, adobe 1998 etc, checked colour management on printer and elements

The image looks fine on the screen , I have emailed a sample image and on my setup it prints fine

The next step was to try the printer on my laptop
any other ideas - this is usually a colour management issue and i have fixed quite quickly in the past on other systems - so I suspect I'm missing something obvious now
 

A:Green cast Images being printed

Wild guess .. Windows 7 software update for the printer ??
 

3 more replies
Answer Match 39.48%

How.
This question may look stupid.But please help me
Is there any way to save the documents or material from internet which to be printer
As i have no printer at home,I have to take that to my friend's house,where we can print.That pc has no internet
So i want to save douments offline and then print later using a pendrive
Windows document viewer is one kind of programme,that useful
Is there any other ways?
Please help me
Thanks in advance
 

A:How to save douments from internet which are to be printed later

6 more replies
Answer Match 39.48%

I have a problem with my Word documents. When I try to print them, the right edge is cut off. I thought it was my computer or my printer, so I took it to another computer, and the same thing happened.

The problem is in the files themselves. How do I change the files so they function as they used to? This has been the case with more than 20 files, which were made at different times.

My computer used to warn that the form I was using was too wide, and ask did I want to go ahead. I would select yes, it would print, and would look just fine. Now it does not ask that question.

Incidentally, another problem is that my files no longer end with .doc, but now say .rtf. All of my Word files changed in several ways at once.
 

A:Word Trimming Right Edge when Printed

11 more replies
Answer Match 39.48%

computer freezes, especially when going to facebook.com. I am getting pop-up ads. everything I print on my Brother MFC-440cn printer comes up with a watermark from "Spectrum Glass" When trying to download from your instructions for DDS I get a blank page and no download. I have included info that I thought may be useful.
 

A:lock-ups, pop-ups, and watermarks on printed material

Run the following:

Please download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

Double-click to run it. When the tool opens click Yes to disclaimer.
Press Scan button.
It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.

Thanks,

Kevin....
 

1 more replies
Answer Match 39.48%

I'm running Windows 8.1 64 bit. I have a PNG file that exceeds the size of the page, 8.5 x 11, when printed. When I view the picture online it appears that it should fit the paper okay. I resized the file by %, pixels, and measurements (inches). I also changed the paper size to 8 x 10. Can somebody tell me what I am doing wrong.

Thanks
PapaK

A:Can not resize PNG file to fit paper when printed

Open a Word document of the desired size and import it there. You can also draw a box on the Word document and put it into there - it will fit. If you don't have Word, try Paint.

3 more replies
Answer Match 39.48%

I'm trying to print images/pictures using windows photo viewer and I get this error "Your pictures can't be printed because this error occurred".... It doesn't tell me which error.. simply just says that in the dialog box. THe dialog box comes out like 4 times with the same message and I have to click OK.

I've already tried googling it and the only fix I can find is replacing photowiz and I already did but it has fixed. I've also installed Photo Gallery and it stil lgives me the same error when I try to print and picture. I've also reinstalled all my printer drivers...
Windows 8.1 Updates installed . HP Computer

A:Your pictures can't be printed because this error occurred

What is the mfg & model of the printer? How is it connected to the computer?

8 more replies
Answer Match 39.48%

Using HP J4680 printer. Some of the pages I print size I print from web pages are so small it is hard to read the printed pages.

Is there a way to change the printed text size?

If so how?

Thanks

Gary
 

More replies
Answer Match 39.48%

I've spent the last four hours trying to solve this/use info that's similar to my problem to no avail. I feel I'm so close I can smell the answer is near!

I have a form I use for work that I manually have to fill in 50 times a day with mostly the same information. This is definitely a job for a computer!

Ideally, I would like to open the spreadsheet and have a button that says 'Print' and it will print what I need - 50 forms with the right information.

So far I have done the following:

Created a custom page size (16cm x 14.7cm)
Scanned an original to use as a background so I can line up the information
Adjusted the Excel boxes to print the info in the right place.

Now I need to print the following number ranges as identifiers:

1 - 22, 29-42 and 51-54

I feel I'm close with using this macro:

Private Sub Workbook_BeforePrint(Cancel As Boolean)
[copy] = [copy] + 1
End Sub

I use both Excel 2003 and 2007, depending on where I am!

I have NO experience of macros until today, so any advice is very welcome.

Regardsm

Jeff.
 

More replies
Answer Match 39.48%

Hi

I suspect this might be a fairly common problem. Whenever I print there also seems to be a block of about 5 fine lines printed over the text for about ever new line of text. Now I recently bought a new (high capacity) cartridge which costs a fortune, so I'm not too keen to buy another if it is the printer (about 6 years old) which is the problem.

Has anyone else had the same sort of problem?
 

A:Solved: Lines through printed page

Try cleaning the print heads, this is the normal solution to this problem.
 

2 more replies
Answer Match 39.48%

When i try to print something the documents appear in my print queue then are deleted before they even begin to print, my printer was working fine until yesterday and now this

Please help

Steve
 

A:Printer deletes documents before they are printed

G'day steviejay, sounds like you have an intelligent printer that is censoring your output!
That is a worry, I haven't seen that problem previously.
You might try having a look in your control panel, system, devices or device manager, with a bit of luck when you scroll down through all your devices you will find a USB printer, (assuming yours is usb) if you open that item you should see something like "this devise is working properly" which is a good start for troubleshooting.
There should be no yellow exclamation marks on this item.
Are you quite sure your print queue in the print manager is being actually deleted?
What kind of printer is it?
The assumption is that it is a PC using a windows variant.
Cheers, qldit.
 

1 more replies
Answer Match 39.48%

Hi, when I print anything from the web (Amazon receipt for example) the 'Print preview' and actual hard copt print appear as source code (similar to lots of DOS type commands etc) and very small print size. Only happens in Internet Explorer 7.0 -tried using Firfox and that appears okay- any suggestions -anyone? (thanks in anticipation)
 

A:Printed Web pages appear as source code?

open IE, click tools > internet options > advanced tab

click the reset button

This will put everything back to default options and all is good!
 

2 more replies
Answer Match 39.48%

Sir,
Thank u for ur support on my previous issue. I have an another issue, whenever I give print from an adobe reader file it shows the error message "Document could not be printed" . I have HP LaserJet printer model F2180. Kindly help on this issue.
 

A:adobe reader files could not be printed

If your problem is that Adobe Reader is unable to print, but other applications can print, I suggest that you uninstall Adobe Reader and then download and install it again.
 

1 more replies
Answer Match 39.48%

Can't find app that lets me get photos printed & delivered to me for Lumia 640XL

More replies
Answer Match 39.48%

Hello TSG!
I am looking for a solution (maybe a registry setting) to not allow XP to print, say, more than 30 pages in any one print job. Any ideas?

Thanks!
Curtis
 

A:Set Max Number of Pages to Printed at a Time

Any ideas? Found some software online that is far beyond what I need.
 

1 more replies
Answer Match 39.48%

I can't see the printed material that I send or what comes to me.

More replies
Answer Match 39.48%

I bought a parallel to usb printer cable to make my HP Laserjet 4L to work on my Vista dell laptop and it worked. Then I upgraded to Win 7 64 bit. Now it won't work. It sees it, installs fine, just won't print. no errors. Can it be a "cable driver" (never heard of such a thing until I started researching this problem) if it worked with Vista? It's a no-name cable, so won't likely have a driver that I can find.

Is there anything I can do but replace the cable?
 

A:HP Laserjet 4L printed with Vista, not with Win7

7 more replies
Answer Match 39.48%

Here is my Hijack this log file. I did everything listed but I am having issues with the way pages load or don't load properly while on the internet. Cannot read the words very well, sometimes they are overwritten , sometimes they are huge or the writing is too thin to be read easily. For example, when I load a newpaper like NY Times, the columns are squeezed in the middle of the screen and isn't displayed so it is readable columns overlap and words and photos overlap or are sqeezed into a narrow column. I have downloaded new drivers for the display, played with display properties and cannot seem to find the problem. Wondering if it is a bug or virus or worm or something. I am really not a geek, so I need help. I don't know how to mess with registry things, so I use Registry Mechanic. But it has not fixed this problem. I get runtime error codes and it asks me if I want to debug... mostly script errors. I ahve no clue about debugging, so I don't do it. Anyhow, any help would be appreciated!!!Thanks! Here is the log file: Logfile of HijackThis v1.99.1Scan saved at 10:46:34 PM, on 5/15/2006Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\sv... Read more

A:Script Errors And Weird Script, Overwriting And Hard To Read

Hi travlinrose and welcome to Bleeping. Sorry for the long wait. If you haven't got to the bottom of this problem yet, can I ask you to install a different browser and let me know if you still experience the same problems please.Try Mozilla FirefoxIf that works we at least know it's a problem with IE.

5 more replies
Answer Match 39.48%

Cookigal, I already tried to scan my computer with avg anti-spyware but i can't save the report. I also tried panda to scan my computer but it won't push through with the scan, i don't know why. the only log file i can give is from hijackthis.exe program. please please please help me regarding my present situation thanks....

Attached is my log file with hijackthis program:

Logfile of HijackThis v1.99.1
Scan saved at 3:06:06 PM, on 4/3/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16414)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exe
C:\PROGRA~1\Grisoft\AVG7\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVG7\avgupsvc.exe
C:\PROGRA~1\Grisoft\AVG7\avgemc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Viewpoint\Common\ViewpointService.exe
C:\Program Files\Analog Devices\SoundMAX\SMTray.exe
C:\PROGRA~1\Grisoft\AVG7\avgcc.exe
C:\Program Files\Grisoft\AVG Anti-... Read more

A:Windows Script Host: Can not find script file c:\autorun.vbs

this is the 3rd post about the same problem

you will not get faster help tagging on to other threads or continually posting

other posts here
http://forums.techguy.org/security/557813-i-have-same-problem-windows.html

someone will get round to helping you. Just wait your turn
 

1 more replies
Answer Match 39.06%

Is there any way to increase the space allotted to each of the windows in the task bar? (I usually have space left over, but the window titles are truncated because of the space limitations.)

A:Width of taskbar windows

Hello Odin,

This may be what you are after. Taskbar Thumbnail Previews - Change Size
Taskbar Thumbnail Previews - Change Margin Size
Taskbar Thumbnail Previews - Change Space Size Between
Hope this helps,
Shawn

3 more replies
Answer Match 39.06%

Hello all,

I m having a problem about which i have googled alot, found some solutions but unfortunately they dont apply to me system despite of having similar problem. Together with this problem, i have some other problems too which i think are interrelated to this.

The problem looks like the following image:



In first image, the bus interface is stuck at x1 though the PCIe 2.0 slot has capacity of x16 speed. The second image is of a normal gpu.

I couldnt try any of the solution given here coz my motherboard doesnt have any of these options. Still i have done some things to get rid of this:
-Tried updating motherboard BIOS
-Reinstalled different video drivers.
-Sent back the card to the company but it was fine there (that is, was running at x16)
-Tried another gfx card (9400GT) at the shop, it worked fine on the same mobo (that is, it was also running on x16)

At this point, I must tell you my specs:
XFX 8600GT 1GB
Intel DG35EC motherboard
Intel Core2Duo E8400 3GHz
2GB RAM
Windows 7 Home Prem and Windows XP Pro SP3 32 bit
and a local, cheap 400W(i think yea it is 400W) iball PSU which has these details

Now ofc, the PSU doesnt even meet 20A on +12V rail (dunno how much req for 8600GT). Everything was running fine on this configuration when i build this pc two yrs ago. Just after an yr, the first to die was the motherboard. got it RMA'ed and even bought the same mobo as a replacement (so that if one mobo is out, another should b working). After 3... Read more

A:Link Width stuck at x1

Welcome to Seven Forums eshan. You've had a spell of bad luck. It IS possible it's the PSU, but for me the 1st choice would be the GPU, then the MB. But since you've had trouble with both, and another GPU works (at least for a short test), the PSU is seeming more likely, as the common part. And it looks like you have a low end PSU.

Let's see if some more knowledgeable members don't come along with differing opinions. Your PSU may be too weak. If you look for a new one, I like Antec personally, but if you find some, post back and we can give you our opinions of which is best. I'm sure others will have their favorite brands that are good. A Guy

9 more replies
Answer Match 39.06%

Old hand at XP. Forced into Windows 7. Stranger in a strange land.

In XP, to modify width of scrollbar, you would left click in desktop.
A menu called Display Properties would appear.
You would click on Appearance tab, then Advanced tab.
Click on Items, then Scrollbar on the drop down.
Then you could input a size number. The default was something like 16, and I'd always increase it to 23.
This gave me a good wide scrollbar that a frenetic mouse cursor would not easily miss.

In Windows 7, I cannot find anything like a Display Properties menu.
Cannot find anything about Appearance.
Cannot find anything about Scrollbar.
Microsoft slogan = 'If it works, delete it.'

A:Scrollbar Width Change

Right click on an empty spot on your desktop and select Personalize from the context menu:

1 more replies
Answer Match 39.06%

Is there a way to change the width of the start menu? I would like to make it wider.

A:Start menu width

Hi xantius,

There was an option in Vista to change the Start menu to Classic view, but that's been removed in Windows 7. Instead, try right-clicking the Taskbar, selecting 'Properties', switching to the Start menu tab, and clicking 'Customize...' There are options there for changing the look and content of your Taskbar.

Cheers,

Walker
Windows Outreach Team

9 more replies
Answer Match 39.06%

How would one know how many pixels the width is of a column in excell? Im using Excell 97.
 

A:Excell Column Width

13 more replies
Answer Match 39.06%

I have a HP Deskjet D4360. Prints off in very small font. Does not fill up page. Lot of left and right margin available. Is there a way to set line width or tell it to print in larger font?
 

A:Printer Line Width

HP Deskjet D4360 Printer Support

You might want to add and save this site in your browser favorites/bookmarks list so you can readily refer to it when needed.

The "Solve a problem" and "How to" sections should be helpful to you.

----------------------------------------------------------
 

2 more replies
Answer Match 39.06%

Is it possible to change a tab delimited file to a fixed width?

Thanks,

Moll
 

A:Delimited to Fixed width

Moll, you would probably get better assistance with this if you give more information. What are you creating the tab delimited file with?
 

3 more replies
Answer Match 39.06%

My toolbar in Firefox goes like this:
Personal Menu (addon) - Bookmarks Menu, Refresh, Stop buttons - Bookmarks Toolbar Items - URL Bar

Prior to Firefox 3.5, my Bookmarks Toolbar would take up as much space as it needed (it has 11 favicons on it), then my URL Bar would start, and take up the rest of the space. Now however, my URL bar turns my whole Bookmarks Toolbar into a dropdown list (">>"), and extends itself so that it's next to the Stop/Refresh buttons.

I'm sure I saw a fix for this just after 3.5 came out, but at that point I'd moved all my bookmarks into my Bookmarks menu, and was happy with that- now I think I'd prefer it back the way it was.

Does anyone know a solution for this? (If you can understand what I'm asking )
 

A:Solved: Firefox 3.5 URL Bar Width

This is a known bug in Firefox 3.5.1. I believe this will fix. bug 447571.xpi 1.1 Worked for me.
 

2 more replies
Answer Match 39.06%

Hello,

my jumplists are too narrow to display icons on the left (see attachment). Is there any way how to fix this?

MC

A:Jumplist width too short

You could try these;

7stacks | Alastria Software

True Launch Bar • Superior replacement for standard Quick Launch

I use the true launch bar and am very happy indeed with it.

Regards....Mike Connor

7 more replies
Answer Match 39.06%

i'm trying to get used to opera, works for the most part, but when i go to certain websites, like cnn or netflix or wunderground (which i do often) i have to click "fit to width" to get the page to view correctly. i've looked in tools & preferences but not sure if there's a permanent global fix or is this something that has to be changed for each site? that's a chore in itself! any opera users have any ideas how to work around this? Thx!
 

A:Solved: opera 10.60 & fit to width

i figured it out. uncheck fit to width in web preferences under tools. much better
 

1 more replies
Answer Match 39.06%

I recently found out my graphics cards are only running at x8 instead of x16. They are 2 5870s and I have both crossfire bridges on which physically makes it x16. I tried to look up how to change it and everyone says its in the BIOS. I changed 1 setting from auto to x16 because that was the only thing that said x16 in the whole BIOS but its still running at x8. The board is a M4A78T-E. I'm sure you have to just enable something else to get it to work but I can't figure it out.

-Speedy
 

More replies
Answer Match 39.06%

Hello,

I have an IIyama LS902UT monitor, which is about 3 years old, and a new graphics cards (7600GT), which I have had about 2 months.

Recently I have noticed that when I come out of hibernation, my screen width has been adjusted. I'll adjust it wider (it's only ever a few numbers out), but when I come out of hibernate the next time, it will be too wide, and I'll have to adjust my monitor again.

I run in 1280x1024, and I have the latest graphics card drivers (91.47).

Is my monitor on it's way out?
 

A:Screen Keeps Changing Width

9 more replies
Answer Match 39.06%

Hey guys, I am new to the forums.

I was just wanting to ask a question that I have been wanting to ask for a little while now. I was going to upgrade the RAM on my old netbook. It is a Samsung N130.

When I went on Amazon, I googled "2GB Netbook Ram", and it came up with a lot of searches. In the images, some of them look bigger than the others (length, and width). I was just wondering if the RAM was all the same size.

Because I really don't want to spend like ?15 on RAM when it don't even fit in my Netbook..

Thanks guys, have a nice day!

A:Is all RAM the same size? (As in, length and width, etc.)

There is RAM for desktops and then there is RAM for laptops which is much shorter in width. Second there is DDR, DDR2, and DDR3 which one you get depends on the hardware. More then likely it is DDR2.

This is the best (Fastest and larges capacity) memory you can get for your netbook:
http://www.newegg.com/Product/Produc...eId=1&name=2GB

2 more replies
Answer Match 39.06%

I always get confused about film sizes so is there a rule of thumb to go by, or a way of calculating the ratio between width and height?
I hate these nnn x 272 formats as it's like looking through a postbox when played on my tv, but then this appears to be the norm nowadays!
Anyway, I have two of the same film, not yet burnt to disk, one is 720 x 304 and the other is 700 x 292.
What one, if any, will give the better height when played back on the tv?
Thanks

A:Video width and height

You won't see any difference
First ratio is 2.36, the 2nd one is 2.39

3 more replies
Answer Match 39.06%

How do i change my video bus width from 8x to 16x. have just upgraded from Pixelview 6600GT 128MB to Leadtech 8800GTS 320MB. installed rivatuner and noticed "PCIE link width: 16x supported, 8x selected". Then installed nvtune and in system info it says "Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2211 MHz)
Operating System: Microsoft Windows XP (Service Pack 2)
DirectX version: 9.0c
GPU processor: GeForce 8800 GTS
ForceWare version: 158.19
Memory: 320 MB
Video BIOS version: 60.80.0d.00.68
IRQ: 18
Bus: PCI Express x8".
have searched the bios and can find nowhere to change this.
pc specs:AMD 4400+ 939 dual core
Asus A8N SLI Deluxe (premium bios)
1 x Leadtech 8800GTS 320MB
2 x 1GB Kingston value DDR400
2 x 36GB WD Raptor (raid0) system
2 x 80GB WD (1SATA,1PATA)
2 x Pioneer DVD RW (1x110D,1x111)
1 x Compro DVB300
1 x 500w Ultra X-Connect PSU
Windows XP Pro SP2
 

A:PCIE link width

7 more replies
Answer Match 39.06%

Hi,

I have very long search bar, I want to reduce the width of Search Bar and increase width of Address Bar, see my attachment pic.

I tried to play with Address, Breadcrumb & Search > Address > AddressBand > Basic > AddressBand settings but cannot find a way how to change the width, please help.

More replies
Answer Match 39.06%

After hitting refresh a number of times it eventually rights itself. IE version is 7.0.6000.16643 and OS is Windows Vista Home Premium. Web site (www.costamijas.com) displays fine in FF, Safari and Opera. All ideas welcome!

A:IE7 displays my web page at 200% width

is the ie zom level set to higher than 100%, does this happen on all pages or just this one

3 more replies
Answer Match 39.06%

Brink,
No where on this forum or in the tuturals can I find a way to KEEP the files in a folder at a certain width.

I open all my folders with the LIST view... Then right clicking the 'Name' bar I can choose details.

At the bottom of the box it has "Width of selected column (in pixels): I change the width to 35. BUT... It is only good for that session. The moment the box is closed or I switch to another folder... It goes back to a much wider format. How do I keep the 35 width setting I want?

A:KEEP the files in a folder at a certain width?

Hello CompanyClerk,

The column width is a universal setting. A column in Windows Explorer will always be as wide as it was last set to in any Windows Explorer window.

I find that using the Size a Column to Fit or Size All Columns to Fit (Method Three in OPTION THREE at link) options help make this easier to cope with the width when dealing with columns that always have varying text lengths in them.

Hope this helps some,
Shawn

2 more replies
Answer Match 39.06%

My screen  width keeps randomly changing slightly. it does not happen all the time, but occasionally without warning. Then it will change back to normal  after a while. I have done nothing to cause this to my knowledge. The reduction in width is about 10 mm. each side when it happens.
 
Please, before any suggestions of malware are made, my system is clean. I scan it regularly with a selection of AVG 2014 (a complete system scan carried out on 31 July), SuprAntiSpyware and Emsisoft Emergency Kit. All come up clean. I also use Sandboxie exclusively.
 
My screen resolution is set at 1024 x 768 pixels and has been for a very long time.
 
Any clues ? Settings, files etc.that may have developed some problem. I have no intention of ending up with a pile of disconnected parts to solve this problem or go through any extensive data download analysis. If it is not a simple adjustment hiccup, I will have to live with it for a while.
 
If for instance overheating may be causing this problem, then it has been very hot here for about 3 weeks, so in that case I will see what happens when the weather cools down. If it is dirt accumulation in my computer cabinet, then so long as I know, I will at my convenience have the computer insides cleaned out and the fan inspected by my local service engineers.
 
I use the latest updated Chrome version browser.
 
Edit typing error- 10 cm corrected to 10 mm - first paragraph.

A:Screen width keeps changing

This could be a monitor problem. What sort of monitor are you using ?  Make and model ?
 
If you are concerned about your on board temperatures you could do worse than install 'Speccy' which you can get from BC :-
 
http://www.bleepingcomputer.com/download/speccy/
 
Since you use the expression 'my computer cabinet' can I assume this is a desktop ?  If it is, cleaning it out is a fairly simple operation requiring a smallish soft paintbrush and a can of compressed air (ideally - personally I use a vacuum cleaner, carefully, but majority opinion on BC is in favour of compressed air). If it is necessary to remove the heatsink and fan assembly from the CPU to clean them properly you will then need to clean the mating surfaces of old heat sink compound and replace it with a thin smear of new compound when you reassemble.
 
You don't need an engineer to check a fan. If it spins when powered up, it's working. And if there is no rumbling, whining or squealing coming from it when it is running, the bearings are OK. And in any case, fans are fairly cheap, readily available and generally easy to fit.
 
Chris Cosgrove

1 more replies
Answer Match 39.06%

my table width is at 100%......im on xp os and i have explorer 6.0.....for some reason the table doesnt quite come up to the edges of the window.....there is a little gap of about id say 3-5 pixels.....normally it makes the table as wide as the screen but this time something is being stupid......can somebody plz use their brain power and tell me a solution to this problem. ty
 

A:100% width table is not really 100%....read

7 more replies
Answer Match 39.06%

Greetings, How can i change the width of the HP Advisor Dock? I removed an icon, and now there is a blank space.  Thanks,Shane.

More replies
Answer Match 39.06%

did anyone tried editing gpedit.msc and gain 20% increase in band-width, like in browsing, downloading and in up-loading?
well i just did, when i suddenly remember what i did on my XP-SP3 before..out of curiosity i just tried this tweak and see if it`ll work in windows 7 and it did...so i would like to share this simple trick.
here`s the procedure:

CLick RUN then START BUTTON and TYPE; gpedit.msc
This will open the GROUP POLICY EDITOR
Then go to: LOCAL COMPUTER POLICY then COMPUTER CNFIGURATION then ADMINISTRATIVE TEMPLATES then NETWORK then QOS PACKET SCHEDULER and then to LIMIT RESERVABLE BANDWIDTH.
Doble Click the LIMIT RESERVABLE BANDWIDTH.It will say it is not configured, but the truth is under the 'Explain' tab i.e. "By default, the Packet Scheduler Limits the system to 2O% of the BandWidth of a connection, but you can use this setting to override the default."So the TRICK is to ENABLE Reservable BandWidth, then set it to ZERO.
This will alllow the system to reserve nothing, rather than the default 2O%.
SO ENJOY and Have Fun...

just follow the images below with red circle....

A:Increasing Band-Width by 2O%

Welcome!

Thanks for sharing. What does it do? What does it give extra bandwidth to?

~Jonathan

9 more replies
Answer Match 39.06%

I am trying to make the column widths narrower in the List View of My Files. Currently they are set to 455 pixels. I can change that while I am in the folder, however, after I close the folder and return to it, it always reverts to the 455 pixel width. How can I maintain the narrower width?
 

More replies
Answer Match 39.06%

In Vista, one print job (the last) on a Lexmark will not delete from the queue. No new print jobs will print out. If there are more jobs created, they add up in the queue. I'm trying not to uninstall and reinstall, this has happened frequently with this printer, albeit with an inexperienced user. Please help. TIA
 

A:Print Jobs remain in queue although already printed

What happens when you try to delete it? Error message? Long, long delay?
 

2 more replies
Answer Match 39.06%

When I arrange the worksheet columns to be only as wide as they need to be, the print preview (and the actual print out) has extra space after (to the right of) the last entry in the cell. So a cell that looks like : |xxx|, when printed, looks like : |xxx |. Can that be remedied ? The work-around I have found, is to make the original columns too narrow, so that the rightmost contents are hidden from view - that is really a quite undesirable method, though it achieves a 'correct' printout.Bastymessage edited by Sebastian42

A:Excel 2007 printed columns is too wide

How are you setting the columns to be "only as wide as they need to be"? Are you manually setting them or are you doubling clicking the column separator so that Excel sizes them automatically?I have experienced times when setting them automatically looks good on the screen when viewing the spreadsheet, but prints differently than what is shown. It may have something to do with the print drivers (which I can't control at work which is where I usually see the problem) but I'm not sure.Are you sure that there isn't actually a trailing space in the cells?Have you tried changing fonts just to see what happens?I'm just tossing stuff out for you to consider since I can't actually test anything or see your spreadsheet from where I'm sitting.Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.

12 more replies
Answer Match 39.06%

Three days ago when I tried to print from the web and then WORD there was no installed printer. I checked and the printer was still installed but when printing a document the print screen said their was no printer installed. I checked and the print spooler was not working. So I downloaded the Microsoft tool MicrosoftFixit.Printing.Run.exe. I ran it and presto the printer worked but only once and when I went to print again, again the print box showed that there was no printer installed. So I have to run the Microsoft.Fixit.printing.run.exe tool every time I want to print a page then restart the computer. A royal pain and time waster.

Something is turning the spooler off and not allowing individual programs to see the installed printer and therefore reports that there is no installed printer.

2nd issue. this is a new laptop (ACER) and there is no LED light to show "Caps Lock". I did find a setting that flashes the screen and makes an audible beep. However, my wife has the exact same computer and hers has a 2" x 2" box appear each time she puts cap Lock on. Which is way less distracting than audible beeps and flashing screens. Is there a setting for this? I have not found one in the Microsoft website for Windows 7.

Help,
yarlac

A:Print Spooler turns off after each printed page

Stop the print spooler servicePress Windows+R key and copy this path%WINDIR%\system32\spool\printersclick okDelete the files in the folderRestart the PC and try to print nowFor second issueDid you install ACER launch manager? It is responsible for caps lock notifications

5 more replies
Answer Match 39.06%

The HP 4500 Envy all-in-one printer is new, replacing a defunct Canon Pixma. I received an electronic 1099 form, and printed it from my Foxit Reader program. To my dismay, the printed form was obscured by black bars in 4 places. These do not show in the print preview, and after experimenting for some time, I can find no setting that accounts for the problem. I went online and tried reprinting the 1009 form from last year. The same problem occurred, but my hard copy in last year's records ? printed from Foxit but using the old Canon ? did not have the offending black bars. So far this is the only pdf with which I have a printing problem, but the fact that it occurs with the same form for two different years is puzzling and annoying. Any thoughts or help would be appreciated!

A:Black bars on printed pdf witih HP 4500e

Considerable time online with HP support which included remote access to my computer was unable to resolve this issue. The tech seemed to believe that it was related to the site hosting the 1099, even though the same form had printed without problem from my previous printer. If the problem develops on any other form/pdf, I will have to explore this further. For now, however, printing the screen capture of the pdf will suffice.

1 more replies
Answer Match 39.06%

Greetings, I just purchased an Epson 4490 photo scanner and realized there is no printed user manual- just a very basic bunch of directions. They have an in depth guide on the Epson website but it is not an easy one to download and copy, and I find it very difficult to look online whenever I have a question about using this scanner.
I am wondering if there is anyplace I can get the in-depth printed user guide for this scanner. Printed guides are so much easier for some of us to use. If I had known there was no user guide I would never have purchased this scanner.I am hoping that someone other than Epson might print them,since Epson says they have no printed user guide. Thank you!!
 

A:Can I get printed user guide for Epson 4490?

I doubt you would find a printed version available if epson doesn't have it.
The online manuals are usually in PDF format and you can save them
to your computer so you don't have to download it every time.
Just download and open it,then click file/save as and save it to your desktop.
Of course,after that,if you want to waste the ink,you can always print it out yourself.
 

2 more replies
Answer Match 39.06%

I have a cannon mp210 all in one printer,scanner. When placing actual photos into the machine to be scanned then printed they come out perfectly fine but when I try to print pictures already imported onto my computer they come out very faint/light. The computer keeps saying the ink levels are low which is incorrect as I have just put in new ones. I beleive this is a issue to do with the colour settings installed on windows 7 as our pictures print out fine when the printer is connected to our lap top. If anyone could help me with changing the colour settings that would be great. Thank you
 

A:printed picture colour quality poor

Have you made adjustments to the paper type and print quality?
 

3 more replies
Answer Match 39.06%

Recently the font size has doubled or tripled in size whenI print an email,I amusing OE and an HP 932C printer. I have look at all the settings andoptions of both and cannot find how to reset it. Any help out there? Thank you.
 

More replies