Tech Problem Aggregator

Fatal Error C0000043 applying update 578

Q: Fatal Error C0000043 applying update 578

My Inspiron Duo Won't start windows afer trying to update, Once It gets to update 578 just stops ( "fatal error C0000043 applying update 578 ). I dont have de media to recover windows and The repair option does nothing. Please Help1

A: Fatal Error C0000043 applying update 578

Hi Alex,
 
Have you tried using a restore point ?  Next time you start it up, let it cycle through 'Windows Repair' until it gives up and says something like 'Repair failed'. You will then be given another screen which asks if you want to try other options, one of which is 'Use a restore point'. Click on this option and you will be taken to another screen which will list available restore points. Select one from a date before this problem started and click 'Restore'. Wait until it has finished - it may take a few minutes - and you will get either a message saying it worked, restart computer or a message saying the restore failed. If the former, restart and see if it is now working. If the latter, choose an earlier restore point and try again.
 
One word of warning. If, let's say, the restore point you used was six weeks old, you will then be faced with the task of re-installing any updates since then. If your computer is set to install updates automatically you may well finish  up at the same problem you have now !  I would suggest you change your update options, at least temporarily.
 
To do this, go 'Start / Control Panel / Windows Update' and in the top left hand corner of the screen you come to, you will see the line 'Change Settings'. Click on this, and on the screen that appears, in the top line use the drop-down arrow to choose the option 'Check for updates but let me choose . . .'. this means you will be notified when downloads are available, but it is your choice which downloads get installed. Install one or two at a time and re-boot after each install. Tedious, but at least you will know exactly which update caused the problem, if it re-occurs.
 
All of the above is worth trying, but I am not certain that a Windows update is the cause of your problem. Googling the problem suggest that 578 is an error code, not an update. Still if the above doesn't work, come back
 
Chris Cosgrove

1 more replies
Answer Match 94.92%

Last night I downloaded the upgrades and before I went to sleep I ran the upgrade. This morning I woke up and my upgrade progress had froze (couldn't move mouse even) and I had to go to class. I would leave it run but last time I left my computer on for a while it nearly overheated, so I had to power off. Stupid. But I did anyway.

Anyway, the OS tried to update some system files that apparently weren't there, so it gets to this certain point and encounters a fatal error. I have tried all the options on the windows recovery disk. I have also tried some command line commands but none have worked so far.

Any ways to get around this? I have some songs I composed on the HD I really can't afford to lose along with pictures.

windows 7 ultimate 32bit

A:Fatal Error C0000034 applying update operation 236 of 93422

Can you get into the computer? If you can, you back up your songs and pictures to a CD/DVD or a USB drive.
Also see this http://social.technet.microsoft.com/...2-d708e76df315

1 more replies
Answer Match 93.66%

Hello,
I am having the following issue: "Fatal error C0000034 applying update operation 3 of 17085 (_00000...)" after a few moments I get another error ":( Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you. If you would like to know more, you can search online later for this error: 0xc0000135"
 
I have gone through all the options listed in various threads but have not had any luck. Here is what I have tried and the errors/messages displayed:
-Refresh your PC: There was a problem refreshing your PC. No changes were made.
-Automatic Repair: Automatic Repair couldn't repair your PC.
-System Restore (tried 3 different restore points): System Restore failed while copying the registry from the restore point. An unspecified error occurred during the System Restore. (0x8007050)
-Ran dism.exe /online /cleanup-image /restorehealth but returned the following: Error: 50 DISM does not support servicing Windows PE with the /Online option
-Ran dism.exe /image:C:\ /cleanup-image /revertpendingactions but returned the following: Error: 87 The cleanup-image option is unknown
-moved c:\Windows\WinSxS\pending.xml to pending.old. Now I don't get the "applying update" error but after about 30 sec goes to ":( Your PC ran into a problem" error and reboots.
 
I have very many files/pictures/videos that I just cannot lose. I am at wits end and any help is greatly appreciated. Thanks.
 
-Mario
Dell Inspiron 660s (... Read more

A:Fatal error C0000034 applying update operation 3 of 17085 (_00000...)

Make backups NOW of everything you can't lose! Use DVDs, external hard drives, thumb drives, whatever - just do it. Then we can talk about getting things fixed. It may not require a reformat and reload of everything but that would be the final step if nothing else works.
 
Dick

8 more replies
Answer Match 93.66%

I keep getting this when trying to start my Advent notebook (I have Windows 7 home starter), and I can't do startup repair because it just freezes during 'Windows is loading files', in major need of help

A:Fatal error C0000034 applying update operation 174 of 68677 (_0000...)

Can you boot up in Safe Mode?

5 more replies
Answer Match 66.78%

I believe this is the anniversary update, version 1607. There are no error messages or codes. Selecting either "update and shutdown" or "update and restart" makes the computer shutdown or restart normally without applying any update. How should this be fixed in order to get the update to apply?
 

More replies
Answer Match 66.78%

Hello All! I did search for this problem and I apologize if there is a post somewhere because I didn't find anything.

Upon attempting to update Java, I have received the following message:

Windows Installer Error Applying transforms: verify that the specified paths are valid.

I have Java 2, version 1.5.0. I ran the update when my Java icon appeared on my task bar telling me that an update was available. I downloaded the update but cannot install.

Anyone have a suggestion?

Thanks!!

Maureen

A:Java Error Applying Transforms During Update

Check this page out and welcome to BChttp://www.java-samples.comMark

4 more replies
Answer Match 65.94%

I had to install a malware remover after catching a trojan, which worked just fine, but when it asked me to restart the computer it will only start in recovery mode and stay stuck on the screen saying "Error C0000034 applying update operation 44 of 62501". If I press F8 when restarting all the options require me to log on as "adinistrator" (the spelling error worries me as well), and it will not accept the password. Have been unable to turn on the computer since without it either getting stuck or at the menus requiring "adinistrator" password. What should I do!

More replies
Answer Match 65.94%

Getting Error C0000034 applying update operation 25 of 10833 when trying to boot up.  Forcing shut down and restart puts computer in recovery mode, which fails.  Any suggestions?

More replies
Answer Match 65.1%

Ok, so on our computer downstairs, I installed Service Pack 1 for Windows 7. After it rebooted, on the Windows 7 loading screen it shows "Applying update operation XXXX of XXXX". After a certain number it says "Error applying operation XXXX of XXXX", and then the system proceeds to hang on that screen, meaning that I am unable to access Windows.

I try mashing F8 for my life when resetting the computer, but I never get a list of boot options, so I cannot get into Safe Mode or even try the computer's Last Known Good Configuration.

The edition of this version of Windows 7 is 64 bit Ultimate.

The laptop I am using is also 64 bit Ultimate. Another thing I want to point out is that both of these computers have been taking an INCREDIBLY long time (near 12 hours at this point) trying to download and install Service Pack 1. There is no spyware or anything running in the background. I am fearing that I might get the same error on this machine but I have taken the liberty of creating a System Restore point in the event it happens.

I have two other Windows 7 machines in the house (32 bit Professional and 64 bit Home Premium), and both of them installed Service Pack 1 without any kind of problem, and both of those computers installed them rather quickly.

A:Error Applying Update Operation after installing Service Pack 1

For anyone else having this problem, I think my problem was being caused by the language packs that you can get on Windows 7 Ultimate. After I reinstalled Windows on our family desktop I installed SP1 off the bat and it worked. On my laptop, I removed all of the language packs and attempted to install SP1, where it was successful.

7 more replies
Answer Match 61.32%

Downloaded the SP1 Update today from Microsoft and immediately installed it on my work system without any issues besides the 1hr 20 min. it took to complete. 64bit OS AMD Quad Processor.

However, I installed it on my home system this evening, same 64bit OS but Intel quad processor and during the reboot process I got the the black win7 start up screen and below the logo it started showing files being updated and then froze with fatal error C0190001 file 498 of 97524 (bfsvc.exe)

Let it sit for another 40 minutes or so and figured it was never going to budge from that screen it froze on so I did a hard reboot. And then tried system restore and even then I got a exception error and message that restore failed. After trying another time with the same result upon the re-boot I was surprised that my system booted normally and when I got to my desktop there was a message saying system restored! Whew.

Not sure what went wrong and just may eventually go the route of a new install with SP1 rolled in already.

My home system is also unable to successfully install the Microsoft SQL Server 2008 Service Pack 2 (KB2285068) update either.

A:Win7 Sp-1 Update Fatal Error

Are you able to access Safe Mode (f8)?

9 more replies
Answer Match 61.32%

I installed the updates for my computer, but instead of shutting down my computer for it to do its "applying updates" thing before it shuts down, i reseted it and forgot about the updates. Now whenever i try to boot my win7, it tries to install updates but stops and says "Fatal error C0000034 applying update operation 282 of 102368 (progr...)"

http://oi55.tinypic.com/2ahy3v8.jpg

Please help, i need that computer for school projects. Im on another computer at my house but everythings stored on the other one. I tried putting in the Windows 7 repair disc but it says it repaired it when i press "repair computer" but it still cant boot. I have no idea what to do!!

A:Fatal Error Installing Update

See if the instructions here will help you Windows 7 Ultimate SP1 installation fails with error code c0000034

1 more replies
Answer Match 60.9%

Unable to remote to machine at work since upgrading to Windows10.

A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 10.

More replies
Answer Match 60.06%

Hello,
Firstly, I would apologize for my bad english.

I have had this laptop for a year now. It originaly came with windows 8 but I didn't quite like it so I replaced it with Windows 7 (not genuine). Now, I want to install Windows 10 (I DO HAVE A GENUINE KEY) but every time I start installing Windows 10 an error pops out.

" Fatal error C0000022 applying update operation 2 of 2430 (amd64_ava...) "

and then - black screen!
When I restart laptop it comes back to Windows 7 with a window saying:

" We couldn't install Windows 10
We've set you PC back to the way it was right before you started installing Windows 10.
0x8007002C - 0x4000D
The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation."

I would love to hear your opinion on this and/or how can I resolve this?
Have you had the same problem?
What should I do?
Please, help me..

Thanks a lot, Rita.

More replies
Answer Match 59.22%

Hi,

In the middle of windows update, I'm getting a BSOD with VIDEO DXG_KRNL FATAL ERROR. After this, I have to hold the power button down to power off, and when I restart it says "Restoring your previous version of windows" and then I can go back into the computer.

Because of this I can't update windows at all.

I did some reading, but couldn't find much information. Some people seem to think that this is because of a faulty graphics driver installed by windows update. So, I manually updated my graphics drivers (intel as well as nvidia), and used WUSHOWHIDE.DIAGCAB to uncheck all other updates except "Upgrade to Windows 10 Home Single Language, version 1511, 10586". Repeated windows update, still same error.

Also, this is not the first time I'm getting this error. It happened last time there was a big windows update. But that time, I disabled only the intel driver from the list of updates, and it went through fine.

I have uploaded the zip file according to instructions. Can anyone help?

More replies
Answer Match 57.96%

While updating HP Active Support Library in windows vista home premium it downloads and checks for space allocation and then gives me Error 1316.A network error while attempting to read from file c:\windows\installer\HP active support library.msi Then after the rolling back action I receive Error-1603-Fatal-error during installation consult windows installer help (msi.chm) or msdn for more information. I have tried to go to the latter but have been unsuccessful in eliminating this problem. Is there anything that can be done short of restoring my laptop back to its original out of the box settings?

A:Receiving Error-1603-Fatal error during installation of update for the home support library in windows vista home premium

Worth reading, IMO: http://www.zolved.com/synapse/view_content/20113/Error_1316__A_network_error_occurred_while_attempting_to_rea

Louis

1 more replies
Answer Match 57.96%

Computer runs slow, no sound from computer, windows media player no longer works, constantly get warning pop-ups to update media codec and internal error of media systems.

DS (Ver_09-02-01.01) - NTFSx86
Run by jjj at 21:48:55.65 on Thu 02/19/2009
Internet Explorer: 6.0.2900.5512
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.504.66 [GMT -8:00]
============== Running Processes ===============

C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe -k netsvcs
svchost.exe
svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\ArcSoft\Connection Service\Bin\ACService.exe
C:\Program Files\Google\Common\Google Updater\GoogleUpdaterService.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\svchost.exe -k imgsvc
C:\Program Files\Sony\VAIO Media Integrated Server\Music\SSSvr.exe
C:\Program Files\Webroot\Spy Sweeper\SpySweeper.exe
C:\WINDOWS\System32\ezSP_Px.exe
C:\WINDOWS\System32\igfxtray.exe
C:\WINDOWS\AGRSMMSG.exe
C:\Program Files\HP\hpcoretech\hpcmpmgr.exe
C:\WINDOWS\System32\hphmon06.exe
C:\WINDOWS\System32\spool... Read more

A:Red Circle with white X on the Task Bar /Fatal Media Error -Update Video Codec

Hi,

Sorry for delayed response. Forums have been really busy. If you still need help with this post a fresh dds log, please.

2 more replies
Answer Match 54.6%

Since Microsoft says that not updated drivers can cause the power option not to put the machine in standby and thus lock it automatically , I have spent more than 2 days installing uninstalling asking trying etc. and concluded that the driver update Intel Management Engine Components/Interface Chipset is not being properly updated no matter what .
After checking and rechecking with my service tag and the dell system detect it is the only update that I have repeatedly concluded and still in the Control Panel it is the old version .

Found more threads that have the same subject but no answer that works for good , cause there is no intention to do this every week .
Bios is updated all other stuff are updated .

A:Intel MEI update not applying

Chipset, Graphics and other components on the laptop system board are always customized by Dell and are rarely ever updated, but if updated it must be Dell's update. Intel chipset drivers should not be installed on dell systems. On current win 8 models the incorrect drivers will be blocked since they are incompatible. Keep what you have and look for solutions elsewhere. MS warning doesn't apply. 
Have you tried expanding the categories in Advanced Settings in Power Options? You can control many settings there.

5 more replies
Answer Match 54.6%

When I shut down last night there were three updates being installed. The second one took over four minutes.

This morning I had :'Applying update operation 217 0f 217'
'(\Registry\Machine\COMPONENTS\...)'
My box froze so, after some 15 minutes, I hit the hardware restart. I then had nearly two hours of fun and games. The Windows repair utility gave up and I finally found a restore point which worked. This was the restore point before the Windows updates had been applied so I suspect that, if I shut down now, I may hit the sqame problem. I have manually created a restore point that should take me back to this iteration. Hope so !

'HKEY_LOCAL_MACHINE' doesn't have any 'COMPONENTS' so I've no idea where these updates are being applied

But I don't want to miss out on critical updates so has anyone had this problem and found a way through ?

(My box is running Windows 7 Ultimate 64 bit on an AMD Phenom II X 4 955. I have 6 GB of installed RAM and over 400 GB of free space on my C Drive)

HELP !
Radegaonde

A:Applying update operation 217 0f 217

  
Quote: Originally Posted by Radegaonde



'HKEY_LOCAL_MACHINE' doesn't have any 'COMPONENTS' so I've no idea where these updates are being applied...


To COMPONENTS hive only Windows 7 never defaultly load this file to registry (opposite to Vista).OS load this file only if using is Windows Update or "Turn Windows Features On or Off"
Of course don't touch this file.

Install updates one at time (not all at once) to diagnose which one cause your problem...

5 more replies
Answer Match 54.18%

My Windows 8.1 update is stuck on APPLYING CHANGES 63%. Hasn't moved in over an hour. Anyone else have this problem?

A:Windows 8.1 Update Stuck on Applying Changes

UPDATE - I clicked on Cancel Update after over an hour of it stuck, in hopes it will just reinstall...hitting cancel will start the download over...HEADS UP.

30 more replies
Answer Match 54.18%

Hi, whenever I try to start windows I get applying update operation 414 of 414 (\Registry\Machine\Compnent\I...)

I've tried to repair startup and I get a message similar to this

Problem signature
Startup repair offline
1 - 6.1.7600.16385
2 - 6.1.7600.16385
3 - unknown
4 - 21200332
5 - autofailover
6 - 4
7 - NoRootCause

Any help would be appreciated

also if I press the hold the power button it goes into sleep mode but if I hold the power button while its resuming from sleep it will turn off

A:stuck on applying update operation

Try a System Restore from System Recovery Options as far back as necessary.

9 more replies
Answer Match 54.18%

Hi guys,

When trying to boot my computer, I keep getting a message "Applying update operation 217 of 217" and it stays stuck on this all day (I've left the computer on for about 10 hours).

I've tried turning off the power and rebooting but the same thing happens over and over again.

Anyone got any ideas to what I can do?

A:Applying update operation 217 of 217 stuck

  
Quote: Originally Posted by xrey


Hi guys,

When trying to boot my computer, I keep getting a message "Applying update operation 217 of 217" and it stays stuck on this all day (I've left the computer on for about 10 hours).

I've tried turning off the power and rebooting but the same thing happens over and over again.

Anyone got any ideas to what I can do?



And of course you have your win 7 dvd and a restore point. If you have those no problem. Otherwise try booting into safe mode (F8). If that doesnt work you can try a repair install from the win 7 dvd.

Ken J

3 more replies
Answer Match 53.34%

When applying the Windows 10 Anniversary Update, I encountered the error ?We couldn?t update system reserved partition?. After researching for a solution, most I came across requires me to extend the system reserved partition, which is set to 100MB, to around 400MB. However, I tried different disk partition management solution and none seems to be able to extend this particular partition. I have freed up space adajent to the SRP so space should not be a problem. What should I do? 

More replies
Answer Match 53.34%

I have windows update set so it downloads updates but doesn't apply them automatically.

For the last couple of nights, there has been an update to apply when I log off. In both cases, the update seemed to hang and I left the computer switched on overnight with the monitor switched off.

On the first occasion it was still hung in the morning so I reset the computer. All seemed to be OK during the day but when I came to close down there was an update to apply. I guess it was the same one. It hung again and I left the computer overnight again. This time it had switched off but when I switched it on again it came up with a temporary profile.

A message appeared telling me to look in the event viewer but that is a waste of time as there are several hundred million entries which don't mean anything to me.

Where do I go from here? I guess I can do a system restore but that is likely to lead me back here after a day or two as the system tries to keep itself up to date.
Any advice greatly appreciated.

A:Windows 7 Home hangs while applying update

Welcome to Windows Seven Forums.

You haven't said which update it was, so I'll take a guess that it may have been SP1. It's never a good idea to switch your computer off while an update is being installed.

May I suggest you download and install the Windows 7 System Update Readiness Tool? It may help solve your problem. The link is for the 64-bit version.

Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [August 2011]

9 more replies
Answer Match 53.34%

A very strange thing happened today, first time I've seen this on my real or virtual machines. Luckily it happened to a VirtualBox vm for which I had several snapshots so I could revert to an earlier state and got everything back (VirtualBox vm snapshot = about the same as system image on real, physical computer).

Here's the problem description, I would like to know what happened and maybe also why this happened.

A Windows 7 Enterprise installed on VirtualBox 4.04 virtual machine, licensed and activated. A lot of software installed, used solely for testing purposes. Been up and running a few months without issues, all updates installed except SP1.

Today a normal boot produced this:

Attachment 151170

It took about a minute for Windows to run through "update operations" 1 through 92703.

After "Applying update operation" phase Windows rebooted, trying to configure some updates, finally stopping like this:

Attachment 151171

Again a reboot. Windows had totally reverted to a point after first boot. All installed software is gone, as well as installed updates and personalizations. It's just like after the first boot after installation some months ago, even showing the browser choice dialog:

Attachment 151172

As I mentioned, this is not an issue per se because I could use an earlier snapshot to put everything back, to revert Windows as it was yesterday. However, I really would like to learn what and why happened. I have never before seen a Windows instal... Read more

A:Applying update - Failure configuring - Reverting changes

Hello Kari!

I shall post all that I can, however, it is far from the reason. It isn't really very solid at all, but it may be all you can get.

How sure are you that it is exactly at the point after first boot? What I mean by this is this (slightly below (restructured post subtly, read to end before attempting to answer )






Quote:
Today a normal boot produced this:


That should only ever be caused by a Windows Update. Any chance that a Windows Update installed in the background last time before you shut down?

There is a bug which you might just be experiencing. Experts the world over argue about whether this is even possible. I have seen it with my own eyes; it happened on one of my own computers once. And I am not the only one. Many people have experienced and reported it, but to many experts it seems impossible. It is not impossible, it happened to me.

What happens is that the "Setting up account for first time use Window appears" when it shouldn't do. And it creates a whole new user profile of sorts.

Say my account name is Richard. My old folders were like this:

C:\Users\Richard\Documents
C:\Users\Richard\Desktop
C:\Users\Richard\Downloads
etc. etc.

The re-running of the configuring window creates new copies of these folders in the same directory:

C:\Users\Richard\Documents\~My original documents, still intact
C:\Users\Richard\Documents\~Default template
C:\Users\Richard\Desktop\~My original documents, still intact
C:\Users\Rich... Read more

6 more replies
Answer Match 52.92%

Downloaded Windows 7 update and installing it in pc shutdown. But it's stuck in a windows logo, saying "applying update operation 909 of 909 (chuchu/chuchu/..)" tried to restart the PC for bunch of times but to no avail. I tried the F8 but I get stuck with the Repair Your Computer cause I don't have that damn windows installation disc with me. Is there any other way I can system restore it without CD or if possible, can I use another installation disc so long that it's Windows 7? Someone pls help me out. I would appreciate it surely.

A:Applying Update Operation got stuck in windows logo

You should be able to get System Restore to work from a full Win 7 DVD providing it's the same SP level, and the same edition as the current install.

You can download most of them from the links here....
http://www.heidoc.net/joomla/technology-science/microsoft

1 more replies
Answer Match 52.92%

So I was watching netflix and I got the warning that I had ~5 minutes to shut down the computer or it would shut down itself so that it could update itself. I got done closing things and shut it down by hitting the power button and holding it down.  Next I turned the laptop back on and it started to update so I zoned out of it and watched something on my phone. While doing so I noticed some type of an error updating message and did not touch is because last time this happened it just rebooted without the update. However instead it turned itself off and did not turn back on. I tried hitting the power buitton to turn it back on and that did not work. I also tried the suggestions I found on this support website such as taking out the battery pack and unplugging the AC adapter for the power source.  

More replies
Answer Match 52.08%

Hi

After installing the update and rebooting everything worked fine. But when I shut down the laptop and switched it on again, it came up with a blue screen with a Stop 0x50 in Win32k.sys. I could not even boot into safe mode as Windows failed to start no matter which mode chosen.

Any suggestions??

Thanks

iTeamSupport

A:Blue Screen after applying update to Windows 7 Home Premium 64

Hi iTeamSupport,

Is this computer a desktop or a laptop? Turn on the laptop once again and tap "F8" to bring up the safe mode menu once more. Then, instead of choosing safe mode, choose "Last Known Good Configurations". See if this get's your computer boot at least.

2 more replies
Answer Match 50.82%

my external HD gets "Error Applying Attributes" everytime when I try to change off Read-Only attribute. my whole hard drive is now only Read-Only and I cant change it.
That I get when I change folder Attributes:

Error Applying Attributes
An error occurred applying attributes to the file:
..\***...
The media is write protected.

I get to choise "Ignore" "Ignore All" "Try Again" "Chancel".
Even if choise Try Again I get same error again, so I mostly press Ignore All and if I only press Ignore I get same error but other file in that folder.. ><

Is here any way to fix this error?

A:Error Applying Attributes

Hello Aw22,

Since a drive is the same as a folder, then you might see if doing step 3 in Option Two in METHOD TWO of the tutorial below in a elevated command prompt may work for you instead. You would just use the command below, but substitute the drive letter for the drive that you did this with instead.

attrib -r "C:\*.*" /S /D

Read-only File and Folder Attribute

Hope this helps,
Shawn

3 more replies
Answer Match 50.82%

hello vista experts!

i'm trying to install pinnacle studio 12 ultimate but this error message always appears - "error applying transforms. verify that the specified transform paths are valid." so i can not install my pinnacle studio 12. i already reformatted my computer but to no avail.

before this thing happens, i was able to install the pinnacle and works fine but unfortunately, i need to reformat my computer. then this things happens now. i'm using windows vista ultimate sp1 edition running on a core 2 duo 2ghz, 2gb memory and 250gb hard drive.

your help will be so much highly appreciated!

thanks in advance!
 

More replies
Answer Match 50.82%

I get this error when I try to take full control over a directory
Error Applying Security

An error occurred while applying security information to:

D:\path\name

Access is denied.

can anyone please help me, cause I need to do this fro Photoshop Cs4 to work. please and thank u

A:Error applying security!!!!!!!!

D:
Properties
Security
Owner
Select your account
apply

9 more replies
Answer Match 50.82%

I had had ati tv wonder pro and installed it a few weeks ago and it seemed to work fine. Just recently i decided to update the drivers for it(including the remote control drivers) When i ran the updates it gave me some error about being unable to delete a file and said that it couldn,t remove the old version of the drivers.
I tried to remove the them the old fashioned way by just deleting the files and it kept saying they were in use, even after rebooting. Using Moveonboot, i was able to delete the remote drivers.
Now when i try to install the updates it says "Error applying transforms. Verify that the specified transform paths are valid.
F:/Install/Remote/1033.MSTRu
It even says this when I try to install it from the CD itself.
Trying the add/remove programs option gives me the same error.
Any help on the matter would be appriciated, thanks.
 

A:Error applying transforms?

run
sfc /scannow
and see if you deleted any windows files
check the readme file in the update drivers and see if there are any special instructions to install
 

1 more replies
Answer Match 50.82%

I am trying to deploy an image using ImageX and I got an error below,
[0%] Applying Progress
[Error] D:\users\Administrator\AppData\Local\Microsoft\Windows\temporary internet files\Content.IE5 <Error =3>
Error restoring image
the system cannot find the path specified.
I am deploying an image to a single PC with USB external disk drive where the image is stored. This is not over the network.
This is a good known image that has been used in the past and the path is correct! What's the solution? thanks.



Thang Mo

More replies
Answer Match 50.82%

hi, I was installing nero 8 in win 10 and my Lenovo yoga 900 shut down and restarted. after that I tried to reinstall nero but it said that : error applying transforms . verify that the transform paths are valid. what does it mean and can it be fixed? i
then installed nero 10 because i was told that it was compatible with win 10 but then it said : pending reboot validator.
how can it be fixed? please help....

More replies
Answer Match 50.82%

hello vista experts!

i'm trying to install pinnacle studio 12 ultimate but this error message always appears - "error applying transforms. verify that the specified transform paths are valid." i already reformatted my computer but to no avail.

before this happens, i was able to install the pinnacle and works fine but unfortunately, i need to reformat my computer. then this things happens now. i'm using windows vista ultimate sp1 edition running on a core 2 duo 2ghz, 2gb memory and 250gb hard drive.

your help will be so much highly appreciated!

thanks in advance!

A:error applying transforms......

Hi, mr.yoso.ko, and welcome to the forums.

The top 4 results in Google all point to threads created by you in various forums - so I am curios - why not contact Pinnacle and ask them what this means?

1 more replies
Answer Match 50.82%

I have another user setup with standard settings and want to set them up to be able to play Civ IV without me the admin having to enter the password everytime they want to play it.

It's in C:\Games\Civ IV, so I've tried changing the permissions of users\ to modify and write enabled. However I get the 'error applying security' message with no prompts as to how to solve the probem!

Any help would be grateful.

The interesting thing is it applies the changes anyway, even though it tells me I'm not allowed - security flaw!

A:error applying security

  
Quote: Originally Posted by Okran


I have another user setup with standard settings and want to set them up to be able to play Civ IV without me the admin having to enter the password everytime they want to play it.

It's in C:\Games\Civ IV, so I've tried changing the permissions of users\ to modify and write enabled. However I get the 'error applying security' message with no prompts as to how to solve the probem!

Any help would be grateful.

The interesting thing is it applies the changes anyway, even though it tells me I'm not allowed - security flaw!



Hi okran and welcome
Why dont you just crate a shortcut for it and give it run as admin privledges?
Ken J+

5 more replies
Answer Match 50.82%

Hey . I am new in this forum and not so expert in computer.

i was trying to use some protection for my drives then i disabled all the permission for SYSTEM from the properties of my G drive. Now i can't open the drive whenever i am trying to allow all the permission for SYSTEM it's giving me an error it says ' An error occurred while applying security information to : G:\ Access Denied ' i can't even open the drive from windows XP . What Can i do now ? by the way i did that from Windows 7.

sorry about my English as English is not my language.

A:Error Applying Permissions

Have you tried booting into Windows 7 in SAFE Mode (F8)

2 more replies
Answer Match 49.56%

I was trying to write properties to some music files. I have done it before to the same file on vista, but forgot to save so im redoing it. When I attempt to save what I have just entered I get this:

"An unexpected error is keeping you from applying properties to the file. if you continue to receive this error, you can use the error code to search for help with this problem.

Error 0x8007000D: the data is invalid.

I have all updates, and the files are good.
Any help would be great.

BTW I can write info to most file but some give me this error. They were all off the same backup hard drive, transfered at the same time and I have writen properties to these files before.

A:Error is keeping me from applying properties to files

I get this error as well when I try to edit metadata via the windows explorer toolbar. It only affects some (not all) songs, and the ones affected are missing all of their metadata. Strangely enough though, my music programs like winamp and songbird recognize all metadata for these files--the problem arises when I try to move these song files to my mp3 player, as it cannot find any artist or album information with which to organize the files.

As far as I know, all metadata was intact pre-windows 7.

2 more replies
Answer Match 49.56%

am getting that error when trying to create a virtual switch.

adding ports to the switch new virtual switch failed. the operation failed because the file was not found.

tried the following command, as stated in apost on this forum, but no luck:
>netcfg -l c:\windows\winsxs\amd64_wvms_vspp.inf_31bf3856ad364e35_6.2.8102.0_none_8bf66ac0928702ad\wvms_vspp.inf
-c p -i vms_pp

am using a realtek card.

anyone who can help?
thanks in advance.

More replies
Answer Match 49.14%

Good day everyone,

I have searched the forum and failed to find an answer to my problem. I am currently having problems accessing one of my internal hard drives (not the one with Windows system files).

When I right click > Properties > Security > Edit
to edit the permissions of my drive X:\ I get the error noted in the image below. I'm not certain why im getting this error but it is absolutely frustrating. I run an SSD and I'd like to able to install certain programs on drive X:\ but since I do not seem to have full control, I am not able to.

I have tried using Take Ownership (which is described in [URL=" post[/URL] ) but I still get the error.

I have tried to run Windows Explorer as an Administrator, same results.



I believe I have covered the main troubleshooting steps that are suggested in this forum so if anyone else has any ideas, I'd love to hear them

A:An error occurred while applying security information, $$PendingFiles

Does this have anything to do with your problem?

Sounds like that happens when ProgramData or Program Files got accidently moved.






Quote:
Rename or delete $$PendingFiles, create a new $$PendingFiles on the partition that has ProgramData, and (assuming the new partition is d do

mklink -j c:\$$PendingFiles d:\$$pendingFiles


is that $$PrendingFiles folder hidden on the SSD? I've never seen that before so it must be something new with SSD's on how they store data. Hopefully it's not your partition!

1 more replies
Answer Match 49.14%

Trying to install Windows 10. Uninstalled all components of HP Client Security Manager and thought I uninstall HP Client Security Manager as well. But it still appears on the programs list. When I try to uninstall it again, I get this error:  Error applying transforms.  verifiy the specified transform paths are valid. When attempting to install Windows 10 at this point, it indicates HP Protecttools needs to uninstalled (which I assume is HP Client Manager since that is what appears in the program listing .... in regedit, the two seem to be connected.) I don't know what transforms are and have no idea on how to proceed. I see something about changing the path for the transform in regedit, but I don't even find a transform and HP Client Security associated in the registry. When I try to use the Microsoft uninstall utility, it doesn't recognize that either Client Security Manager or Protecttools is installed (it is not on the list of applications presented) so I click Not Listed and it  asks me to provide Product Code for the software. I haven idea where to find that. Any advice is appreciated.

More replies
Answer Match 49.14%

http://picasaweb.google.co.uk/adityamoorthy1986/UntitledAlbum02/photo#5099281750976741794

the entire error msg is :

An access denied error was returned while attempting to change a service.You may need to log on using an Administrator account to make the changes.
The only account on the system is mine that is an administrator account but i still get this error
can anyone help?
 

A:Solved: I get an error message when applying settings on Msconfig

16 more replies
Answer Match 48.3%

please help me when i am trying to installing a game getting the following error
please tell me wt to do !

A:[SOLVED] Error applying transforms. Verify that the specified transform paths are val

Hi,

what game are you trying to install and what are you computer specifications i.e make and model, memory, etc

Steve

11 more replies
Answer Match 47.88%

I have a client who continues to get fatal errors when running Windows Updates for Windows XP Tablet.

-checked the update log file and the fatal errors are with wuauclt.exe and wucltv.dll files.

-disabled Auto-updater and tried installing manually from website, same errors

-disabled firewall

-stopped and restarted 'cryptsvc'

-renamed %systemroot%\system32\catroot2 oldcatroot2

-client has done a complete format and recovery using the restore disk that came with his unit, but problem still exists.

Im all out of ideas so any assistance you could provide would be greatly appreciated.
 

A:Getting fatal errors during windows update

6 more replies
Answer Match 47.46%

I recently disabled what I mean is 'Boot thawed' my Laptop to reset time and date to access Goggle and YouTube, but after I finally access to those sites. I turn 'Boot frozen' and restarts my Laptop but it goes installing updates and finishing 5 of 5 after that it begins power on and startup, but I receive this message it repeats itself and can I ask you guys to help me fix my Laptop I dont have a USB and DVD or CD for my formatting of my Laptop. I also use both F8 and use Safe Mode and repair your computer but it all doesn't really work anymore. Here are the f****** images. How to fix it?
(Sorry I didn't arranged those images properly)
Area 51 S4

More replies
Answer Match 47.46%

Hello!

Does anyone know how to enable details of registry updates after a Windows 7 update reboot?

On one computer, the registry updates are shown under the Windows boot logo like "Applying update XXXXX of YYYYY" followed by the registry key. On another nothing is shown...

I cannot figure out if this is a BIOS setting or something set in Windows.

Thanks,
S?ren

More replies
Answer Match 47.46%

Am running Win XP Pro along with Office XP SP2. Just went to the Office XP update site and installed the Excel and Word 2002 Update Oct.16 2002, and the Outlook 2002 Update Jan 22 2002.

Word and Excel still work fine, but Outlook will only start in safe mode, hanging at the splash screen if started normally. I tried the trick of renaming the *.dat files noted in some of the bulletin boards, but tis did not help.

I then un-installed Office XP and reinstalled it to SP2 level without the three patches noted above. Outlook still refuses to start normally.

I seem to recall reading somewhere that there is a "patch to patch the patch" for this problem, but can't seem to find the article again. Have also unsuccessfully searched the web and am now truly stuck!

Since Office seems to have reinstalled itself with all it's old defaults, I assume that the un-install programme does not remove registry entries? Any idea if there is a manual un-install instruction set anywhere - I can't find it at Microsoft.....!
 

A:Outlook 2002 only starts in safe mode after applying update of jan 22 2002

have you tried a repair,it is in the tools tab
if you want to uninstall and get rid of the registry entries use jv16 from
www.jv16.org
 

3 more replies
Answer Match 47.46%

Hi, I din't found the solution for this one:
C:\Program Files\Windows AIK\Tools\PETools>imagex /apply /check /verify  E:\SOUR
CES\install.wim 1 j:\

ImageX Tool for Windows
Copyright (C) Microsoft Corp. All rights reserved.
Version: 6.1.7600.16385


[  10% ] Applying (with verification) progress: 8:35 mins remaining
[ ERROR ] j:\Windows\winsxs\x86_microsoft-windows-explorer_31bf3856ad364e35_6.1.
7600.16385_none_518afd35db100430\explorer.exe (Error = 5)


[ ERROR ] j:\Users\Administrator\AppData\Local\Microsoft\Windows\Explorer\thumbc
ache_sr.db (Error = 5)



Error restoring image.




Access is denied.
 
********
 
After some time, looking in the event viewer I found that my antivirus was blocking the deployment:
Blocked by access protection rule.  Access to object J:\Windows\winsxs\x86_microsoft-windows-explorer_31bf3856ad364e35_6.1.7600.16385_none_518afd35db100430\explorer.exe was blocked by rule Anti-virus Standard Protection:Prevent Windows Process spoofing.
 
So I opened mcaffee and disable Access Protection and there you go...

More replies
Answer Match 47.46%

I've been trying to implement a macro to apply a defined chart format to every selected chart. I've been using a post from this forum a few years back http://forums.techguy.org/business-applications/823459-macro-format-charts.html to help, and it's working great for a single chart. However, I'd like to enable it to run across several selected charts at once, and that is giving me problems that I can't get my head around.

I'm trying to use this code to run through the objects in the selection:

Sub ReFormatSelectedCharts()

Dim ThisChartObj As ChartObject

Dim ThisType As String
ThisType = TypeName(Selection)

Select Case ThisType

Case "DrawingObjects"

For Each ThisChartObj In Selection

Call FormatThisChart(ThisChartObj)

Next ThisChartObj

...Click to expand...

However, it gives me a type mismatch when I try to use it. I've investigated by implementing the following code instead of the for each loop:

X = Selection.Count
ReDim arrCharts(1 To X)
For i = 1 To Selection.Count
arrCharts(i) = Selection(i).Name
Debug.Print arrCharts(i)
Next iClick to expand...

Interestingly, it seems that the second chart in the selection is being treated as a button by Excel - so in the debug output in the case with three charts I'll see something like:

Chart 10
Button 1
Chart 5Click to expand...

while for two charts it'll just be
Chart 10
Button 1Click to expand...

I've tried it with different pairs and sets of chart... Read more

More replies
Answer Match 47.04%

I have a Dell Optiplex GX280 running XP.
Windows advised of security updates, it installed them, and advised restart needed to complete
Carried out reboot and got the Blue Screen of Death … with error:
Stop C0000 21a Fatal System Error
Fatal Error … 0xc0000135

I have tried restarting ..using ‘last known working condition’ And also in ‘safe mode’ …. Both fail with same error.

How can I recover, is there an easy way to roll back ? I don’t mind re-installing Windows as long as I don’t lose my applications.
It has a full Norton Security Suite installed in case that has a bearing, I have a copy of the XP CD.
 

A:Fatal ErrorÂ…0xc0000135 after windows update

A copy or full version CD with product key?

Here is a link that may help http://support.gateway.com/s/Checklists/BPC/ck20070904113.shtml
 

2 more replies
Answer Match 47.04%

Will the SURT tool work on remote machines? I ask because I don't see failure messages on machines I patch with WMIC or using DISM. What I DO find is that 500+ machines do NOT have the MS15-046 patch (3054834) after I have applied it, 3 times now, over the past week with reboots of the machines.

More replies
Answer Match 47.04%

Hi,I have fundamentally the same problem as Laura H from this thread http://www.bleepingcomputer.com/forums/topic342716.html.I've had problems with these fake antivirus programs before and they really did a number on my laptop. I treated the problem using various tools mostly malware bytes and deleting some suspect files.Been working fine for the most part however today out out of nowhere I was attacked by malware doctor. I deleted the suspect file from the temporary internet files folder and ran malware bytes that detected trojan and deleted. Shortly after drwatson ??? was shut down and some time later I think explorer shut down because my desktop went back to basics....no theme,desktop wallpaper etc. the windows 95 look if you grasp what I'm trying to get at. I thought it was no big issue and in my own time restarted laptop when I realized audio wasn't working after trying to play a film.Upon restart I get the blue screen with the same message as Lauras. So for the most part I'm in the same situation as Laura with some minor differences such as I didn't use Spy doctor etc.I have Kaspersky AV installed which has been inefficient in protecting my laptop lately, especially from these fake AV attacks. I am using Windows Firewall which I know is a bad idea.Myrti was helping Laura resolve the issue and I have followed her instructions upto the following actions:'locate this file and right click it > choose rename > rename it to userinit.txtnow we wi... Read more

A:Malware doctor infection removal and then error c000021a (fatal system error)

Hello,Please follow the instructions in ==>This Guide<==. If you cannot complete a step, skip it and continue.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Please include a description of your computer issues and what you have done to resolve them.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.Orange Blossom

6 more replies
Answer Match 47.04%

Hi all, I'm receiving an error message " fatal error: one or more table pointers are invalid. Modifications could be unsafe - press any key to continue"

I've just put together my new build, and have never came across this. Googling hasn't solved anything. All help is much appreciated Computer does seem to run okay when started.

Specs:
Gigabyte G1 Sniper B5 mobo
Intel i5 4430 CPU
Gigabyte gtx650ti OC 1gb
8GB Mushkins blackline ram
1TB Seagate HDD.
- can be more detailed on request.

Regards,

A:[SOLVED] following error on new build.&quot;fatal error: one or more table pointers are in

* Boot up the PC from your Windows installation disk * Press and hold SHIFT and then press F10 * Input "bootsect.exe /nt60 SYS /force" (without quotes) Restart the PC Note: If the above doesn't fix your boot issue then use the command "bootsect.exe /nt60 ALL /force" instead.

5 more replies
Answer Match 47.04%

Hi, I have been getting the dreaded blue screen of death with STOP: c000021a (Fatal System Error)" Error Occurs when i log into my windows 2000 service pack 3 and my linksys wireless usb network adapter connects me to the internet. My computer will remain on and run fine if i do not connect to the internet. This also will happen if i connect to the internet using my backup 56k modem. Any suggestions on what is happening?
 

A:STOP: c000021a (Fatal System Error)" Error Occurs

8 more replies
Answer Match 46.62%

I Own HP ENVY 4-1046tx UltrabookLast time i forced shutdown the laptop (because it got hanged!)and after that i got this errorsafe mode is not workand last know good configration disnt have any effect.sugguest a way out of this....!!!!!











Solved!
View Solution.

A:Blue screen error - c000021a Fatal system error

Solved.... Solved.... n solvedby some mean (confidencial way) i have installed window in it...!Thnxx for help and suggestion.

10 more replies
Answer Match 46.62%

how can i correct to enable installation of antivirus

A:error 1603 Fatal error during installation of antivirus at 99 % instal

Which anti-virus are you trying to install?

After doing some research of the error code, i stumbled upon this: https://support.microsoft.com/kb/834484?wa=wsignin1.0

Give this a shot, to see if this will help!

-Justin

2 more replies
Answer Match 46.62%

Hey, I have Windows 7 running on my HP Pavilion g6 Laptop: Notebook Model: HP Pavilion g6 Notebook pCProduct Number: QE058UA#ABASerial Number: 5CG1390N72  Yesterday I clicked accidentally on the  Windows 10 popup dialog which appeared below right in the corner   . The system run 20 minutes and did some cofiguration,  as a result I am getting this error in the advanced boot options. coooo21a {fatal eystem error}. The initial session process or system procress terminated unexpectedly with status of0x0000001 0x000107c8. The system has been shut down I have tried several options to solve the problem: 1.Lunch startup Repair (recommended) ---> Problem signuture:Problem Event Name:         StartRepairOfflinePromlem Signature 01:      6.1.7600.16385Promlem Signature 02:      6.1.7600.16385Promlem Signature 03:      unknownPromlem Signature 04:      -1Promlem Signature 05:      AutoFailoverPromlem Signature 06:     18Promlem Signature 07:     BadPatchOS version:                             6.1.7600.2.0.0.256.1Locale ID:             &nb... Read more

More replies
Answer Match 46.62%

I'm having a problem with my sister in law's computer. Originally, she had that annoying XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message;

STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)

I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage since I'm not trained for this. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one. I have no windows CD. The computer is a Dell, and it's running Windows XP service pack 2 with Explorer 6. Heeeeeelp! Other than the F keys, I can't get anywhere with this computer.
 

A:Error Message blue screen of death C000021a Fatal System Error Windows Logon Process

9 more replies
Answer Match 46.2%

I downloaded and tried to install Xcelcius and after a short time I get the message Fatal Error - Installation ended prematurely because of an error
When I press OK the installation closes
I use vista home basic
I tried to install using xp compatability and the same thing happens
I also downloaded the program a second time and it still happened
 

A:Fatal Error - Installation ended prematurely because of an error

Look at the Event log.
 

3 more replies
Answer Match 46.2%

I think rebooting could maybe make things worse, so I figured it would be better to ask for advice before attempting to reboot again, so I don't have the scanning information required.

I began to have problems with my computer this morning (June 29). Last night I had let windows install its updates, rebooted, and left the computer on overnight. When I got up the next morning, it had an error about win32.exe encountering an error and needing to close, one of those error report ones. The first time I didn't bother telling it to send. However, afterwards the taskbar disappeared and ctrl+alt+del didn't do anything. I had to reboot manually, and then it was fine for a while until having another win32 error report, which I sent, and after which my sound failed to work for certain things. My winamp had an error about missing something and wouldn't play, and a youtube video's sound wouldn't play. I didn't have to shut it down manually this time, and the shutdown sound worked. The sound worked again afterward, but I tried virus scanning with Avira and it stopped on svchost.exe.mdmp at 22.1%, and it only found a java/openconnect.l for a ?detection?. I tried getting the task manager, and when I tried ctrl+alt+del and clicked it, it not only didn't give me the task manager at all but it took my taskbar, and then nothing else would work when clicked. I rebooted again and tried running MalwareBytes, and then after a couple minutes the screen went black and then turned blue, and had this:... Read more

A:Win32.exe error report, fatal system error later

Bump, please.
I also forgot to mention that after I rebooted the 2nd time, Google Chrome appeared on my computer, but I never installed it. So there's something weird going on there too.

19 more replies
Answer Match 46.2%

Hi Guys,
My win7 X64 laptop keeps freezing up. In Event Viewer I got the following message.

'The following fatal error alert was generated: 10. The internal error state is 10. schannel.

This error doesn't give me much to work on. Any help on this is much appreciated.

Many thanks
AIRobot

A:The following fatal error alert was generated: 10. The internal error

Hello AIRobot & Welcome to SevenForums!

Does these freezes appear when doing something specific on your machine?
Have you updated your drivers lately?

Try going to cmd (press start-orb and search 'cmd') and type this message and notice any outdated drivers:


Code:
driverquery
Best Regards,
FredeGail

1 more replies
Answer Match 46.2%

I put Windows 7 on an old AMD computer. Asus A8V Deluxe MB w/4400 X2, 2 GB memory and ATI X800 Video Card. It installed great and runs pretty good. Thought I would ck the error log and found a few errors I was wondering about.

Error 18 comes up twice in the error log, sometimes three times

Log Name: System
Source: Microsoft-Windows-WHEA-Logger
Date: 2/6/2013 4:20:16 PM
Event ID: 18
Task Category: None
Level: Error
Keywords:
User: LOCAL SERVICE
Computer: Asus-WIN7
Description:
A fatal hardware error has occurred.

Reported by component: Processor Core
Error Source: Machine Check Exception
Error Type: Unknown Error
Processor ID: 1

The details view of this entry contains further information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-WHEA-Logger" Guid="{C26C4F3C-3F66-4E99-8F8A-39405CFED220}" />
<EventID>18</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-02-06T21:20:16.140625000Z" />
<EventRecordID>13974</EventRecordID>
<Correlation ActivityID="{6EF4F233-17D4-4302-BEBB-391D1EA8592C}" />
<Execution ProcessID="1372" ThreadID=... Read more

A:Fatal Hardware Error 18 and Processor Performance Error 6

Anyone?

1 more replies
Answer Match 46.2%

I have been battling a virus(es) on my desktop for the past couple weeks. Yesterday, I downloaded and ran Spybot in safe mode. It listed 7 problems and I chose "fix selected". Spybot fixed 5 of the 7 and then prompted me to reboot to fix the other 2. Admittedly, I was brain-faded so I didn't look closely at what file names or paths it was trying to fix. Since that particular reboot, I have not been able to load windows since; fyi, I am running XP Pro. When I powerup, the computer flashes the Windows XP logo and then ultimately gives me the following message (before prompting me for login info): Fatal System Error c00021a. windows logon process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000). The system has been shut down.

At this point, I'm not sure if I have a virus problem that has escalated, causing this fatal error, or a completely different problem. I'll give a bit of a background, since it may be relevent. I run Malware Antibyte scans and Advanced System Care (ASC) scans weekly to clean up any issues, but lately the problems would reappear just hours after running the scan. So, a couple of days ago, I downloaded Avast 5 and completed a scan. I also downloaded a freeware called Teamviewer at that time, although i don't think that is part of the problem, despite the timing. Yesterday morning, when booting up the computer in normal mode, I was unable to see any desktop icons or taskbar, I only could see... Read more

A:Virus cause Fatal System Error c00021a error?

Sit tight: An experienced member of the Malware Response Team will be along to assist you.

6 more replies
Answer Match 46.2%

Hi everyone,
This morning I turned on my PC (Windows 7 x64) and I get this blue screen error STOP:c000021a [FATAL SYSTEM ERROR].
I can't even get passed the starting windows screen it just keeps on rebooting then getting blue screen again. I've tried safe mode and last known configuration point. Both just give me blue screen after the drivers are loaded. Haven't installed anything new recently so I don't know what the cause of this problem could be. I apparently have no system restore points even though Norton would make them every scan. I can get to command prompt and that is the only thing I can get to. Is there a way I can fix this through command prompt. I think I've attached the screen it gives me and that's all I know.
Thanks!
 

A:Error code c000021a [FATAL SYSTEM ERROR]

6 more replies
Answer Match 46.2%

When it happens it says 'Fatal error (0xC0000005) at 0x7761E41B'
It makes a minidump file which I have attached, please read it and tell me what I have to do to stop this error and let me play my game

REDACTED ZM - 29.01.2015 19-01-16.zip

A:Error when trying to play Black Ops 2, Fatal error 0xC0000005

Hey Sam, while you wait for dump analysis, run a full Scan with Malwarebytes
if necessary in Safe Mode.

Then run SFC /SCANNOW Command and establish a clean boot from the Troubleshooting Steps for Windows 7

8 more replies
Answer Match 46.2%

I have no idea what is wrong with my computer its specs are
Gigabyte Z77X-UP5 Motherboard
Intel I5-3570K 3.4GHz Processor
1TB Western Digital HDD
Sapphire 7970 Graphics Card
I believe it has something to do with the Standard SATA AHCI Controller because it says its corrupt/damaged but when I try to update the driver it says it has the latest update, the computer goes to a blue screen freezes saying your computer ran into a problem and needs to restart please help
 

More replies
Answer Match 46.2%

Hello Experts,

I have new laptop with windows 8
I installed one program that I need to work and I am getting the error: fatal error 171 while attempting to report error 171 

Troubleshooting done:
1- Reboot the laptop
2- Uninstall and install 2 times 
3- Tried to run the program in compatibility mode with older windows, even other laptop with windows 8 is working just fine
4- Tried to install MVF runtime, it didnt continue the installation but no error message appeared
5- Tried to check for windows updates, up to the latest ones
6- Tried to update MVF, but I got error messages that it cannot be installed  

Many thanks in advanced 

More replies
Answer Match 45.78%

I was updating the drivers on my ASUS ROG G75 using Iobit's Driver Booster 2. It said I had several drivers out of date so I selected all of them and left the machine to run while I ran some cleaning and maintenance programs in the background (Iobit Advanced System Care 7 and Privazer). I didn't think this was an issue because the laptop has more than enough power to run all those at the same time but the driver update got to 70% and hung there for 15 minutes. I figured something was screwy and that the computer would simply not install the fully updated drivers and so I closed all programs and rebooted the laptop to complete installation of the successfully downloaded drivers and now, now I have nothing.

By nothing, I mean just exactly that. I hit the power button, I see the cursor and hear the DVD drive spin up and that is it. No error codes, no choices for booting into Safe Mode, nothing. I'm not even sure it booted far enough for me to get into the BIOS! I've been poking around the net trying to find a program that will allow me to boot into a rescue disc and perhaps attempt to repair the MBR/ntloader but I am either not using the right keywords or I'm screwed because I can't find what I'm looking for. I found Paragon's Rescue Kit 14 but either I didn't follow the instructions correctly or my laptop isn't even searching for bootable media because it is too far gone.

I do have such a program as I am looking for but I recently moved and have absolutely no idea where that... Read more

A:Attempt to update drivers caused possibly fatal system crash

F9 on bootup to access the Restore Wizard

5 more replies
Answer Match 45.36%

After some mild gaming on my HP Z420, it started rebooting on it self and at the boot screen i can now see929 FATAL MCA ARRORMLC ERROR detected CPU 0Any idea if the board is starting to act up or is the CPU, or something else?( bios 3.65, Runing windows 7, 32Gb of ram, 2TB HD and 670 GPU)

A:HP Z420 - 929 Fatal error - Mlc error detected cpu 0

no one seen this error before?

3 more replies
Answer Match 45.36%

Looking for help with this. Initial research suggested making a change in the registry to solve this but I'm not that good to attempt that without support.

Full text:

Fatal Error!
Error loading EXE C: . . . \Fish Tycoon\Fish Tycoon.exe Error 2

Would also like to provide a "Hijack This" log to see what other gremlins are nesting on the drive. Seems to be running slow even with a recent RAM upgrade.

Thanks!

A:Fatal Error! Fish Tycoon.exe Error 2

This is not the forum for HJT logsFish Tycoon is an online gameWe can run a few scans here to see if you need to post a HJT log---------------------Please download Malwarebytes Anti-Malware and save it to your desktop.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan. If an update is found, the program will automatically update itself. Press the OK button to close that box and continue. If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button. The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Click OK to close the message box and continue wit... Read more

7 more replies
Answer Match 45.36%

After solving "ntldr is missing" problem,I boot the computer.THen computer ask me to choose the operating system to start.Its screen displays following message:

select the operating system to start:
Microsoft Windows XP Professional
Microsoft Windows
Use the up and down arrow keys to move the highlight to your choice

If I choose Microsoft Windows XP Professional,error mesages will appear as below:
STOP :c000021a{Fatal System Error}
The Session Manager Initialization System process terminated
unexpectedwith a status of 0xc0000034(0x00000000 0x00000000)
The system has been shut down.

But if I choose Microsoft Windows,there will be message stating "Microsoft Windows I\O Error accessing boot sector file multi(0)rdisk(0)partition(1)\BBTSECT.DOS".

What should I do to solve this fatal system problem? Does fixing "ntldr is missing" problem cause this fatal system error?
Thanks in advance
 

A:Error message:Fatal System Error

sub-forum: guides & solved issues

The above forum has information on how to use Recovery Console & Windows XP CD to restore the OS. Caution, I recommend full backup to a 2nd disk. Caution, don't enter 'r' to the first decision point. Caution: next decision made should not reformat the partition. If you have the ability to clone the hard drive, then you have a spare should recovery be re-done.

Other posts recommend configuring computer to a minimum: the boot hard drive, cdrom, and 1 memory module (256MB is the minimum for XP). This is an easier first step before reloading anything.

Caution: oem restore bombs you back to out-of-the-box conditions. All data & applications are overwritten. This is different from above restore.

You did not indicate what significant changes occurred preceding the problem. Is the hard drive entering old age? Was the disk re-partitioned? Were applications closing/freezing in the days leading up to this?
 

1 more replies
Answer Match 44.94%

I usually use TechBytes for help with computer problems. But lately when I try to create a post I get this

Fatal error: Can't use function return value in write context in /home/pctechby/public_html/forums/system/Text/HtmlPurifierInternalLinkDef.php on line 70

Why am I getting it, and what can I do about it? Thanks in advance for any help givin.
 

More replies
Answer Match 44.94%

hi
not sure if this is the right forum to post or not! When trying to delete programmes (that I know are no longer on my PC) but appear in Add/Remove Programmes, I try to delete and I get a message saying fatal error!
can anyone help?
msiz
 

A:fatal error

6 more replies
Answer Match 44.94%

hello
i faced a problem during uninstallation of java(TM) 6 update 24, the error message is: Fatal error during installation. can anyone help me?

A:Fatal error

Version 6 Update 26 is the latest version of Java. I would recommend going through add/remove programs and uninstalling any installed versions, rebooting and then starting with Version 6 Update 26.

1 more replies
Answer Match 44.94%

hi all.i am trying o put on put on windows 2000,i have don the bootup part and then it gets to the it setup part where it restarts and then it coms up with:

fatal error

An error has been encounted that prevent setup from continuing.

setup failed to Install the product catalogs.This is a fatal error.The setup log filles should contain more information

press ok to view the setup log fill.

can any one help???

thanks.
 

More replies
Answer Match 44.94%

hello everybody!
i was trying to install windows xp sp2 ,but in the third step which is "installing windows" appears a notice 'fatal error 426' wich don't let me continue... what can i do please help me



best regards!

A:Fatal error 426

may you please give me an answer, please i'm bagging you , i'm waiting for...

2 more replies
Answer Match 44.94%

Please help me! I play CS very often but today i see this while i playing: FATAL ERROR:
NET SEND PACKET ERROR:NO ERROR. What is this? I can't play ! HELP ME PLEASE !
 

A:Cs 1.6 fatal error net!

Take a look here

https://support.steampowered.com/kb_article.php?p_faqid=245
 

1 more replies
Answer Match 44.94%

I have a game "Bejeweled 2 deluxe" that when I try to open this message pops up, "Unable to prepare game executable" It was working fine from the time I installed it but two days ago it decided to pop up with this. Can you help
 

A:Fatal Error

How do I find a crack, so that I can copy and paste it? Also after I find the the "crack" to copy and paste, where do I put it? Thank you for your time.
 

1 more replies
Answer Match 44.94%

Hello, I am trying to load win xp into an azus eee from a flash drive that I made from wintoflash and when the windows splash screen comes up it acts like it is gonna work but I get an error message that says Fatal error an error has been encountered that prevents setup from continuing. Assembly protection error. I desperately need to get xp back in this Azus!!! Please help!!!
 

A:win xp fatal error

"Assembly protection error" - usually means there is something missing on the installation media or you've made some errors in creating it.
 

1 more replies
Answer Match 44.94%

New update :Blue screen is :Extras Cyberlink Power DVD13Pictures and videosalso :get from time to timeFatal errorNo language file was founderror code 8024001FCould you please translatethanksNibirulilu78message edited by Nibirulilu78

A:How to fix fatal error

"Extras Cyberlink Power DVD13"Uninstall, using this 2 step uninstaller.Wise Program Uninstaller http://www.softpedia.com/get/Tweak/...http://www.freewarefiles.com/Wise-P...http://www.freewarefiles.com/screen...http://wisecleaner.com/wiseuninstal...

4 more replies
Answer Match 44.94%

Everytime I try to play my game on uproar.com I keep getting this fatal error...
0032 SetuplterateCabinet: C:/DOCUME~1/COMPAQ/LOCALS~1/Temp/SHZ18D.tmp
 

More replies
Answer Match 44.94%

hi
i foung fatal error in installation at the time final initialization

A:fatal error

Hi anyarthu, Welcome to TSF!

Could you please give us more details regarding this "Fatal Error".
What program were you trying to install when this occurred?
Is there an "Error Message" (like 000008c) associated with it?

Answer these questions and we will be in a better position to help you.

Kind Regards,

3 more replies
Answer Match 44.94%

Hey tech guy!

You helped us once before and we are hoping you can help us again. we have a dell computer and are using windows xp and recently when we signed on, our desk top disappeared and was replaced by a generic warning screen saying that our computer's security was at risk. it offered a link to scan our computer but we ignored that - fearing it would futher infect us and scanned our system using super antispyware. the first time it "removed" 139 threats and we have since ran the scan three or four more times. as of this morning we are still completely unable to navigate our computer. it is currently off line and i am using a lap top to contact you.

Although the trojan.fake drop threats have been temporaily removed we are getting BatCO and Adware/80 solutions surf assistant.

what - if anything can be done to clean our computer up!?!?!

Thanks!
cm
 

A:fatal error

6 more replies
Answer Match 44.94%

on XP PRO program dumps back to desktop then says

fatal error
access violation at address 0x33a649
or any where i can find info for it
 

A:anyone know what this fatal error is

16 more replies
Answer Match 44.94%

well i get a fatal error from time to time


and i have constant pop ups
and i have this thing that pops up saying i have a trojen virus
but i think they are trying to sell me something

i took all the steps to get here
but when running dss the program always crashes and never finishes :(

so i have the active scan log and the high jack this log
but not the dss log

active scan log

Incident Status Location

Adware:adware/searchaid Not disinfected Windows Registry
Spyware:Cookie/Casalemedia Not disinfected C:\Documents and Settings\Tina\Application Data\Mozilla\Firefox\Profiles\mom4mm2s.default\cookies.txt[.casalemedia.com/] ... Read more

A:fatal error

Hi, welcome to TSF!

You are operating your computer with multiple Anti Virus programs running in memory at once:
AVG7
Norton

Disable one of your Anti Virus programs.

Anti-virus programs take up an enormous amount of your computer's resources when they are actively scanning your computer. Having two anti-virus programs running at the same time can cause your computer to run very slow, become unstable and even, in rare cases, crash.

If you choose to install more than one antivirus program on your computer, then only one of them should be active in memory at a time.

There are basically two types of these programs:
On-Access and On-Demand

On-Access Scanners
As the name implies, it runs in the background all the time the PC is turned on and running. The main function of an on-access scanner is to monitor activity on your machine.

On-Demand Scanners
As the name implies, are scanners that only run when you ask them to.
Such as:
Online Scans and scanners that run on your machine but are not actively scanning your machine.

Please disable one or the other so they do not conflict.
_______

Download combofix.exeSave it to your desktop.
Double click combofix.exe & follow the prompts.
When finished, it shall produce a log for you. Post that log in your next reply along with a fresh HijackThis log.
Note:In case you already used Combofix previously, please delete the version you are having and redownload it again, because Combofix is being ... Read more

5 more replies
Answer Match 44.94%

Hi
I apologise in advance for being a bit vague. This happened some months ago while I was abroad and a lot was going on at the time.
I was using an old computer running Windows XP when for no apparent reason I got a blue screen telling me of a fatal error and that the physical memory was being dumped, acounter showed the percentage being dumped and when 100% was reached the computer switched itself off. Amongst the various messages on this screen was one saying that if this was the first time I had seen the message to try restarting the computer.
I tried restarting and some time later the same thing happened again.
My problem:- where is the fatal error likely to be? Is it the operating system or is Windows simply responding to a hardware fault.
As I said this is an old computer and I wondered if a failing motherboard battery would cause this or perhaps a partial RAM failure.
I have another identical motherboard from which I can take all parts which might be needed or if it is the operating system I have all the necessary disks, I am hoping that someone out there can advise where to start as I still do not have much time available for trial and error methods
Regards
phil
 

A:Fatal Error

When there is no idea what is causing the problem and time is short, one decisive method is to reinstall the OS and device drivers from scratch (or OEM partition or discs). If the problem goes away, it was software, if not, its almost certainly some hardware failure or conflict.
 

2 more replies
Answer Match 44.94%

Hi all, have some information from an acquaintance who is stuck. OS = ME.

He installed a scanner, "genius colorpage vivid 1200 xe"?

Now when he boots up, he get error msjs,

1 - Enum\htree\root\o

2 - Sureg createkey failed!

These are both of the "click OK" persuasion.

Beyond that, just a grey screen.

And it won't allow starting in safe mode.

Any suggestions appreciated.

TIA,
Andy
 

A:Fatal error?

11 more replies
Answer Match 44.94%

Upon startup of XP I get a "Fatal Error" message that states:

"Fail to delay load library msclib.(Win32 error:2) This program can no longer run and will terminate."

Also I can't download Security Update for MicroSoft.Net Framework 1.1 SP1 on Windows XP (KB2742597)

Any insight would be appreciated. Thanks for your help.

A:fatal error

NDP1.1sp1-KB2742597-X86.exe

1 more replies
Answer Match 44.94%

I think my Windows might be toast. I got some sort of virus and now none of my Windows icons (my computer, recycle bin....etc) opertae properly, I cannot open any folders, programs crash at startup. Icons have changed and system restore opens but to a blank white window. I cannot run a restore or anything. I am using Win XP home.

If this is reversible I would like to work through it. I do have an option of running an "out of the box" functionality restore which would save things I made with certain programs but not the programs themselves.

I can post a hijack this log later if it applies. Am I dead in the water or can you guys help me out? Thanks!
 

A:Fatal error?

7 more replies
Answer Match 44.94%

This one is something else!!! I cannot get my game "Zuma" to even start. I'll click on the desktop icon to start the game & I get this message: "Fatal Error, expecting levels tag". I restarted the system on Safe Mode with Networking & redownloaded the game & it worked fine...then, restarted the system normally & clicked on the same icon & got the same message. I disabled my firewall to see if that was the problem & got the same thing.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, Intel64 Family 6 Model 23 Stepping 7
Processor Count: 4
RAM: 6142 Mb
Graphics Card: ATI Radeon HD 3450, 256 Mb
Hard Drives: C: Total - 595055 MB, Free - 396982 MB; D: Total - 15359 MB, Free - 1466 MB;
Motherboard: Dell Inc., 0M017G, A00, ..CN7443193L0398.
Antivirus: COMODO Antivirus, Updated and Enabled
 

A:A fatal error

Nope, didn't work.
 

1 more replies
Answer Match 44.94%

Hey my name is Erwin and I have a little problem with XP.

I recently bought a new laptop, a Dell Vostro 1720.
This laptop came with windows vista pre installed, but I'm not really fond of vista so I reformatted my partitions and installed windows XP instead (SP2).

However after Installing Xp some problems occured. Somethimes my laptop gave me a fatal error:

STOP: c000021a {Fatal System Error}
The Windows SubSystem system process terminated unexpectedly with a status of 0xc0000005 (0x75e91a76 0x00c7f5dc)
The system has been shut down.Click to expand...

I thought this had something to do with me not having all drivers installed. So I restarted installed all drivers and the problems seemed fixxed. after this I installed MCafee and Firefox and turned of my laptop.

This all happened yesterday, after having installed all drivers I got one more fatal system error however after restarting everything seemed fine.
Even today when I started up my laptop everything went smooth. I installed 7zip and after this I installed Photoshop CS4.

After the installation I tried to run photoshop and I got the fatal system error again. Now each time I startup my computer this error occurs a few seconds after starting up. I can start up in Safe mode normally.

I hope anyone can help me with this problem.

Thanks in advance.
 

A:[XP] Fatal Error.

How to troubleshoot a "STOP 0xC000021A" error
 

1 more replies
Answer Match 44.94%

I keep getting a blue screen and dialog that sez "fatal error-windows will shut down to keep from doing damage to your co
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Yahoo!\browser\ybrwicon.exe
C:\Program Files\2Wire\2PortalMon.exe
C:\Program Files\Java\jre1.5.0_02\bin\jusched.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Dell AIO Printer A920\dlbkbmgr.exe
C:\WINDOWS\system32\devldr32.exe
C:\PROGRA~1\Yahoo!\browser\ycommon.exe
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\CAVTray.exe
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\CAVRID.exe
C:\Program Files\Dell AIO Printer A920\dlbkbmon.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\ISafe.exe
C:\WINDOWS\System32\dllhost.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\PROGRA~1\Webshots\webshots.scr
C:\Program Files\Microsoft Office\Office10\msoffice.exe
C:\Program Files\Yahoo!\Messenger\ymsgr_tray.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\CA\eTrust EZ Armor\eTrust EZ Antivirus\VetMsg.exe
C:\WIN... Read more

A:fatal error

Hi and welcome. I think there may be a couple of issues in the log, but as a general rule, that error is usually hardware related.

Any new hardware additions lately? Or driver updates?
 

3 more replies