Tech Problem Aggregator

After virus checking and cleaning, "lsass.exe" and "ipwins.dll" missing

Q: After virus checking and cleaning, "lsass.exe" and "ipwins.dll" missing

My friend's computer seemingly got a virus, since it sent an email to somebody in her email list, on its own. She asked me to take a look.

She had a virus checker, but it had never been updated. So I installed "AVGfree" and ran that. It found a "trojan horse" virus as well as some other stuff that it said should be removed, so I did. I then ran "ccleaner" and it suggested to remove a TON of crap, like 500mb worth of files (she installs dumb stuff on her computer all the time). I removed these files. Then I ran "spybot" and it removed some stuff. I then defragged, which it needed.

So here I am, feeling like a hero, but then I reboot and there's a message saying that "lsass.exe" cannot be found. I cancel this message, and then there's another message saying that "ipwins.dll" cannot be found.

I tell her to just ignore these messages until I figure it out, but then she informs me today that she cannot access her email account on her computer. So I've gotta figure out how to fix this.

Any advice?? Thanks.

A: After virus checking and cleaning, "lsass.exe" and "ipwins.dll" missing

She could try the system file checker : tell her to prepare her XP CD (she'll need it if it asks to replace the missing files), then she will have to go to start => run, and type "sfc /scannow".

If that fails, she can perform a repair install if she has an OEM, retail or upgrade XP CD (recovery CD's cant' do that). She will have to boot on the cd, thus she needs first to change the boot order in the bios to CD-rom first. Then, when XP setup loads, choose the option "To setup Windows XP now" (not the one about recovery console). On the next screen (after the licence agreement) she should be given the option to repair her current xp installation by typing R.

Once that's done, if the CD wasn't a SP2 version, first thing is to go to windows update to reinstall XP SP2 and all updates she could have done since. Don't surf on the internet before any antivirus and firewall (either windows or another) is enabled.

2 more replies
Answer Match 114%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 112.8%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Answer Match 107.7%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Answer Match 107.4%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Answer Match 106.8%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Answer Match 106.2%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Answer Match 106.2%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Answer Match 105.9%

Hi all,

I'm puzzling this one. In the folder options when I choose 'view' the radio button to show the hidden files is missing. I've already checked the registry at the HKLM/Software/Microsoft/Windows/CurrentVersion/Explorer/Advanced/Hidden

and everything seems ok (value for 'Type' is 'group' etc.). Using the XP tweak (Kelly's corner #155) shows the hidden files, but the button still missing.

Another thing that I encountered with was that from the start menu the "Help and Support" not working. Again, the registry seems fine, and the process is activated (started). This came up when I tried to use system restore option - with no success.

Virus scan didn't find alerts of any kind

To make a long story short- below is the log file of HiJackThis. Please review it and reply if you see something to be concerned with for repairing my computer.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 14:36:54, on 21-Dec-08
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16762)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Network Associates\Common Framework\FrameworkService.exe
C:\Program Files\McAf... Read more

A:missing "show hidden files" button + "Help and Support" not working from start menu

Ok I found the answer (after quite a lot searching), as follows:

1. for the 'Hidden files' radio button - I used methods 1 and 2 from here-
http://www.technize.com/2007/05/13/s...s-not-working/

2. for the helpcenter I just reinstalled it as described here -
http://windowsxp.mvps.org/rebuildhelp.htm
note that the file 'dataspec.xml' is needed to be available for this, and it can't be done directly from the XP CD. The thing that worked for me was to insert the XP CD, and use the file that in my computer (C:\) and afterwards another file on the CD.

Again, all this happened with no virus detection, so I believe that there is no infection. However, if someone has remarks on the HiJackThis log I've put, feel free to add them.

Have a nice day,

Fitch.

1 more replies
Answer Match 105%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Answer Match 105%

I have to set up a Broadband connection. But Local Area connection icon is missing. Someone told "drivers" could be missing... I installed few. But the problem is as it was.. please guide me in this regards.. Thank you

Screen shots Attached

A:"Local Area Connection" missing in "Change adapter Settings".. Plz hlp

Hi and welcome to the Forum
Is the Broadband connection working OK?
Where are you looking for the icon? Can you post a screenshot of the location where you expect to see the LAN icon?

9 more replies
Answer Match 104.7%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Answer Match 104.1%

Okay, I have an ATI Radeon 8500 on my Windows XP system, and one day, after my dad had used the computer, the 3D video driver stoppeed working. He can't recall doing anything. So it goes. I think "whatever", downloaded the latest Catalyst drivers, and try to install it, only to get the message "INF Error, Video Driver Not Found" and then "Try to set up your adapter with a standard VGA driver before running setup". I tried googling for info (apparently it's a common-ish issue), but I never found anything that worked. I tried uninstalling anything ATI and then installing, to no avail. I tried uninstalling the error-listed VGA adapter from the Device Manager and then running install which didn't work. Rebooting after that also didn't work (it popped up with "New hardware found" after the reboot, but it couldn't find the proper drivers).

After an unedifying series of adventures I got to http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=45&kind=1 which has several drivers for my mobo. I first downloaded (obviously) the VGA driver, and tried to run setup. Unfortunately, after preparing the install, an Error message pops up saying "The system cannot detect the device, please confirm that the device is configured properly and restart the setup program." I then tried downloading the AGP upgrade, installed it, but nothing changed. I also downloaded the BIOS update, since it mention... Read more

A:"INF Error", VGA Driver "Missing" Installing ATI Catalyst Drivers

the radeon is not integrated with your motherboard, and the onboard video has probably been disabled in the BIOS. to install the appropriate drivers for an ATI radeon 8500 card you need to download and install the drivers from ati's website. from there you can download the latest version of catalyst and install that.
 

13 more replies
Answer Match 104.1%

when i right click on my DVD writer i do not get the options "OPEN",EXPLORE & AUTOPLAY"..How do i bring them back?
 

More replies
Answer Match 104.1%

http://tinyurl.com/k3vyb

I tried copying a fresh version of the file to \Windows\System32. No dice. I tried renaming it all uppercase and then all lowercase. Nothing. I put a copy in the root directory. No effect. I tried everything I could think of, but nothing worked.

Then--doh!--I stopped thrashing and did what I should have done initially: I dug into the Microsoft Knowledge Base and learned about XP's built-in Rebuild command. It can often easily fix "Missing HAL" and similar problems in just a minute or two. If you know about this command and how to use it, you can potentially save yourself hours and hours of manually reinstalling or rebuilding a failed operating system.
 

More replies
Answer Match 104.1%

Computer Specs:
CPU: I5-2400
MB: Asus Pz868
Ram: Corsair 8GB Vengeance LP
Using on board VIdeo For now
Maxtor HD Sata
WD Raptor Sata
HP Lightscribe DVD-r Drive Sata

Problem I was having once I completed my new build with old system parts was as listed in title. It started out as select proper boot device, and now it states ntldr is missing. From what I have been reading it seems as if my partition with my windows 7 install is not set active. I do not have my windows 7 DVD only my old vista DVD. I tried to boot into it to make use of CMD and attempt to make my partition active but I was unsuccessful to even get into CMD. I went into bios and forced booted from the drive with the OS and still same error, also I attempted to disable the other sata and run the computer again with no success also. Look forward to hearing from someone soon. I will be sitting by my laptop all night until this computer gets running.

A:"Select Proper Boot Device" now "NTLDR is missing"

Finally Got to command prompt but it shows my current drive listed as x: dunno if this will be relevant and helpful to anyone.

5 more replies
Answer Match 104.1%

Can anyone help me with this ? i got a picture ... i cant sendto desktop as shortcut the icon is missing .. help !!

A:"Desktop As Shortcut" Command Is Missing from the "Send To" Menu

Maybe this info will help:
Send To Context Menu - Remove or Restore Default Items

3 more replies
Answer Match 103.5%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Answer Match 103.5%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Answer Match 103.5%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Answer Match 103.5%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Answer Match 103.5%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Answer Match 103.5%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Answer Match 102.9%

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\i... Read more

More replies
Answer Match 102.9%

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\sy... Read more

A:"Your System Is Infected" Background + "Internet Security 2010" virus/malware problem

Hi and welcome to TSF.

I'm afraid HijackThis no longer provides the information we require.

We want all our members to perform the steps outlined in the link given below, as far as they possibly can, before posting for assistance.

http://www.techsupportforum.com/f50/...lp-305963.html

If you have problems with any of the steps, simply move on to the next one and make a note of the problem in your reply.

Please note that the Security Forum is always busy, so I would ask for your patience while waiting for a reply - it may take a few days.

This thread will now be closed.

1 more replies
Answer Match 102.9%

I suspected that from not so long time ago I'm getiing massage "Error with NT Autority System or something. Bla-bla..... lsass.exe did something ..bla-bla.... adres 128 or something. The system will reboot after 1 minute" (exus me I forgot what the messege was saying exactly). A minute after my PC reboots. So I was thinkin' is there any way to help me out kuz that stupid massage is pissing me off. I'm afraid that till I'm writing this tread the same lsass masage will pop-up again . Yeah it's really bad situation.
 

A:WTF is that "lsass.exe" doing in my "system32" folder?

your computer is infected with a virus! download and run HJT. don't have HJT fixed anything yet, just post the log here and wait for a certified member to analyze your HJT log. you will be guided step by step through the removal process.

when the message box appears the next time, go to start, run,type shutdown -a and click OK, this will abort the shutdown sequence.
 

2 more replies
Answer Match 102.6%

virus.. popup "Malware Wipe" "the spy guard" and alot of commercials like porn poker and more crap..
this is what I get when I start internetexplorer
Recommended Anti-Spyware Software: Pest Trap, Malware Wipe, Spy Guard Internet Security

TOP RATED
Pest Trap
Most popular spyware/adware cleaner software all over the world. Cleans all known viruses and worms.

Visit Website Free Scan
Malware Wipe
Became one of the most popular programs very fast. It`s really easy to use and at the same time very effective.

Visit Website Free Scan
The Spy Guard
Developed as the most efficient spyware cleaner with realtime protection.

Visit Website Free Scan
Brave Sentry
Award-winning spyware removal utility that will help you fighting all kinds of spyware including keyloggers, trojans and password thieves.

Visit Website Free Scan
AD Protect
World's leading software application that checks, protects and re-checks spyware and spam vulnerability in your home computer.

Visit Website Free Scan

WARNING! YOUR SYSTEM IS VULNERABLE TO HACKERS' ATTACKS AND BREAKDOWNS!
Attention! Your system is currently exposed. Any remote computer can easily browse following folders and files on your computer:
- \Windows\System32
- \Program Files\Internet Explorer
- \My Documents
- Drive C:\ files
Click here to download official intrusion detection system (IDS software)
YOUR PRIVATE INFORMATION IS IN OPEN ACCESS TO OTHER COMPUTERS
Your... Read more

A:Solved: virus.. popup "Malware Wipe" "the spy guard" and alot of commercials

14 more replies
Answer Match 102.3%

There appears to be no open thread on this issue...disappearing context menu "new/textdocument" option.

After trying several alternate text editor demos I found that my registry .txt entry was empty except for the (default) line item...I replaced the entry with an expanded entry found elsewhere on this forum which called for notepad.exe and included ItemName and NullFile etc.

After rebooting and checking my program associations to verify that my new editor, EditPlus, was the default, I found that the "new/text document" option appears and works in all the usual places including the desktop...

But there must be more to the story... Notepad still appears in the ItemName entry. Is this just a default reg entry, with the actual default program assignments appearing elsewhere?

BTW, as an old poster suggested elsewhere X-Setup has been de-commissioned but is still available on MajorGeeks. It has some editing capability but wouldn't add a new TXT item because "it already existed" (already registered).



W7 x64 SP1

More replies
Answer Match 102.3%

Hello,
I really need your help. I have exams coming up soon so need to get back on my computer as soon as possible. I have a notebook with windows XP. The model is Compaq mini CQ10-400.

When I switch the notebook on it displays the "BOOTMGR IS MISSING"... message. I cannot get on my computer passed that screen, apart from when I press escape after pressing Ctrl, Alt, Del. It gives me 4 options ... " F1 system information, F2 system diagnostics, F9 boot device options, F10 BIOS setup."

There is no disc drive so what should I do, and what is the easiest way to fix this issue.

Thanks in advance.

A:"BOOTMGR IS MISSING""PRESS Ctrl+Alt+Del to restart"

Hi and Welcome to TSF!

The only way to fix this is to use startup repair from the Windows XP CD.

15 more replies
Answer Match 102.3%

XP
Im looking for a way to re-create two folders, 1 my pictures, 2 my video. ive tried TweakUI, but that can only move a path. I tried repair (not Repair console) with XP SP2 CD, and ended up with a chose OS screen (which i found out can be avoided with msconfig.) but still regedit has a big whole where my pictues and my video should be. Ive both a SATA and an IDE drive, IDE is used as storage and SATA is partitioned and computer management say Extended partition, with boot on it and system is on the IDE one.
Before it got messed up i had my documents on the ohter partition, which is how i want it.
I would greatfull of some help and a detailed fix, i will fomat but even that is hard as that is part of how it all become so mixed up.
Vince
 

A:Missing Shell Folder for "My Pictures" + "My Video"

Vince, Tweak UI has that ability under the Repair section. Just use the drop down arrow button and choose My Videos and My Pictures one at a time, click the Repair Now button, click Apply/OK.

Tufenuf
 

2 more replies
Answer Match 102.3%

Hello all.

First off, I am in no means acquainted with any troubleshooting or fancy thing outside of everyday computer usage, so please respond as if you are talking to a dummy. I do have fairly decent common sense and Google skill however, which has given me enough confidence to try and fix this issue on my own.

Basically, one day I start my computer (running Windows XP Professional SP3) up and get a black screen saying:

"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this

Start in safe mode.
Safe mode with networking.
Safe mode with command prompt.
Last known good configuration setting (most recent setting that worked).
Start Windows normally."

For a few times, I was able to get Windows working with the last two options, but before I could dedicate time to fix the issue, it became so that none of these options worked, and I got caught in a restart cycle with this screen. Last things that I can recall that may have caused this: Windows Update or CCleaner Registry Fix (just something I do sometimes to make sure everything is working, nothing was wrong prior).

I bought an external HDD enclosure with hopes of popping my internal into it, and saving my stuff onto my laptop before messing around. Oddly, in My Computer, the 2 drive icons (a System Recovery one, and my Main one) would flash for a few seconds, every few minutes, and when I'd quickly click them, it'd say the... Read more

A:"Windows did not start successfully" to "ntldr is missing"

BTW if it IS in fact possible to copy certain files from my laptop's OS, I just realized I can probably just copy those files into the desktop internal (when plugged in as an external) instead of going through the whole DOS thing? But keep in mind, that's the small 3GB partition, so I don't know if that would even work. Unless putting those boot files on that small partition, will help open up the rest of the drive. Not sure how that works.
EDIT: Apologies for the double post, just saw the "edit" button.
 

2 more replies
Answer Match 102.3%

Hello,
I really need your help. I have exams coming up soon so need to get back on my computer as soon as possible. I have a notebook with windows XP. The model is Compaq mini CQ10-400.

When I switch the notebook on it displays the "BOOTMGR IS MISSING"... message. I cannot get on my computer passed that screen, apart from when I press escape after pressing Ctrl, Alt, Del. It gives me 4 options ... " F1 system information, F2 system diagnostics, F9 boot device options, F10 BIOS setup."

There is no disc drive so what should I do, and what is the easiest way to fix this issue.

Thanks in advance.
 

A:"BOOTMGR IS MISSING""PRESS Ctrl+Alt+Del to restart"

16 more replies
Answer Match 102%

hi every body
My PC has lots of files called "Thumbs.db" & "System volume information" in all its drives.I cant delete these files and I think the cause of shutting my pc down automatically and showing blue screen is these files.the operating system is win xp/sp2.
I don't know what to do with these and what anti virus will delete them.please help me.
thanks
 

More replies
Answer Match 102%

my computer was hijacked by "support tool" a so called virus protection hijacker. i'm in safe mode with networking now & attached you see my hjt log file. help please. THanks!

actually, i'm on a different computer. it has windows xp home ed. & its a dell inspiron 530S

also, in trying to fix the problem initially, my wife deleted the file "rundll32" beacause the virus stated that had a virus error. so this file may be missing as well & we may need to replace it.
 

A:Computer Hijacked by "Support Tool" "Virus Protection" Prog

I posted this yesterday to get help for a "Support Tool" hijack on a computer. Please help. Log file attached. Thanks.
 

3 more replies
Answer Match 102%

I think I am infected with Malware, Spyware, or some type of virus. My desktop background has become a bright red screen with a toxic symbol on it and underneath it, it says "Your Privacy Is In Danger!" On the bottom right, in the taskbar, right next to the time and date, it says "Virus Alert!" My computer is also attempting to run anti-Spyware programs all by itself, opening browsers with websites to Spy programs and pop-ups warning me of possible hackers. Below is my HJT log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 06:36: VIRUS ALERT!, on 7/20/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\AVPersonal\AVWUPSRV.EXE
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\ewido anti-malware\ewidoctrl.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\WINDOWS\System32\ezSP_Px.exe
C:\WINDOWS\System32\hkcmd.exe
C:\WINDOWS\AGRSMMSG.exe
C:\Program Files\AVPersonal\AVGNT.EXE
C:\Program Files\Common Files\Real\Update_OB\realsched... Read more

More replies
Answer Match 102%

The "Idle-time Full System Scan" in Norton 360 v4 is bogging down my computer constantly, and there is no option to turn it off in "Automatic Tasks".

I contacted Norton and (after several attempts to find someone at Norton who could understand what I just said above and getting "hung-up" on over Norton chat. Inexcusable!!!) I was able to get a hold of a technician who told me that Norton intentionally removed this option "for security reasons, because they didn't want people turning it off".

The problem is, people will then be forced to turn it off by turning off ALL scheduled tasks (under "Settings/Scheduling/Schedule:Manual Schedule") and that is an even worse security problem than the relatively small one that would be created by turning off idle-time full system scanning.

Once the system has completed a full system scan, all files are on-access scanned anyway, so running a full system scan every 3-4 days is rather silly and extremely annoying--especially, because it will continue to try to run every time the system is idle if you cancel it.

A warning urging the user to not turn off idle-time full system scans without fully understanding the risks, and after explaining the risks, would be VERY preferable. Or at least the option to run the full system scans when the system is idle on a certain day of the month/week! The schedule for idle-time full system scans really needs to be separate from other tasks. In fact, t... Read more

More replies
Answer Match 101.1%

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

A:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

1 more replies
Answer Match 101.1%

OK.....
As I said I am new.....
Hope this info is the way you need it.
MANY MANY THANKS IN ADVANCE FOR THE TIME & HELP !!!
Check out the following .....HHEELLLPPP


Logfile of HijackThis v1.98.2
Scan saved at 12:38:36 PM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\logonui.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dellnet.com
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Micro... Read more

A:NEW THREAD / "xads", "xlime", "Context3.kanoodle"

hi

how to create a folder ?

right click anywhere in your desktop
click new,a tab opens ,click folder ,name it hjtantivirus .

download again hijackthis and install it in the new created folder .

your hjt is here now
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

it will not work properly if it stays there .

and don t create a new thread ,keep only one thread .this one ,now .

1 more replies
Answer Match 101.1%

I tried to associate the file extension .txt to a new editor program
with the well known cmdline programs ASSOC and FTYPE.

No, assigning them through WinExplorer menu does not work.
But this is another problem which should not discussed here.

When I type now one of the following alternative commands at the CommandPrompt then Win7 returns me something like:

assoc .txt=txtfile

"Access denied"
The following error occurs: .txt"

or

ftype txtfile=D:\notepad++\notepad++.exe "%%1"

"Access denied"
The following error occurs: txtfile"

Why?

The command above work fine under WinXP

Peter

A:"access denied" when using "assoc" and "ftype" from cmdline?

Question:

Did you run cmd.exe with administrative previlliges?
Elevated Command Prompt

3 more replies
Answer Match 101.1%

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

A:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

1 more replies
Answer Match 101.1%

hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane

A:Remaking "My Music", "My Pictures", "My Videos" folders

  
Quote: Originally Posted by Legume


hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane


You have a backup from before the problem started? a win 7 dvd to do a repair install?
ken

4 more replies
Answer Match 101.1%

Hi:

Looking for insight/advice re: KB3054476.

According to Infoworld, it was "Optional" in May, but I was not offered it then.
This week, it was offered as "Important" and "Recommended" (!), but only for one of my 2 Win7/64 boxes.

I have read the MS KB article, as well as THIS FORUM THREAD, the latter of which includes a report of a BSOD due to this particular update.

However, there isn't much out on the web about it.
And most of the discussion about it is overly technical for me.
And I am confused as to why it was previously offered as "Optional", but now is "Important" or "Recommended".

I don't *think* I "need" it (as I have no webcam on this box). And I don't like to tempt fate by fixing things that are not broken.

So, 3 questions:
Is it safe to install?
Is it really necessary/important?
Or would I be OK to hide it?
Thanks very much in advance!

A:KB3054476 offered as "Important"/"Recommended"/"Optional"

The status of updates changes with circumstances.
If an update isn't relevant, it won't be offered at all.
If however it's relevant but the related software is not apparently in use, it may be 'optional' - and gravitate to 'Recommended' or 'Important' if the related software is in use.
It can also be promoted through the hierarchy by MS depending on feedback through WU and error-trapped feedback.


If you have (and use) a webcam, then it's probably best to install the update.

4 more replies
Answer Match 101.1%

please help, please im begging here guys, im having a nightmare, ill burn my comp soon, help please!
 

A:i posted "lsass virus" just a bit down, please help, noones even read it i wan to cry

be patient man! The only reason that your not getting replies is becuase. 1) maybe no one on right now knows how to help you. 2) they are busy.

posting 2 times on the same thing isnt going to help, its just going to make people agravated.
 

3 more replies
Answer Match 101.1%

HI, first of all, I found out that my home computer was infected by the lovelorn worm. Plan to clean that tonight.

Secondly, I found copies of 2 files named "folder" and "desktop" in almost all folders. The files where identical so I suspect that there is a virus that's propagating this. Is my hunch correct? Is this related to the lovelorn virus or is it another kind? What should I do?

Thanks!!!
 

A:files named "folder" & "desktop" in all directories.. is this a virus???

Symantec site you may want to review. I don't see anything about the file replication you are experiencing but the site may be helpful to you.
 

1 more replies
Answer Match 101.1%

Hey guys, Ive run Adaware, Spybot, and Symantec in safemode. Adaware and Symantec successfully removed some entries but the problem still persists. Im getting constant popups including "netster", "heavy.com", "smashits", and others. Heres my log, and thank you in advance!

Logfile of HijackThis v1.99.1
Scan saved at 8:43:05 PM, on 7/22/2006
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\Program Files\Symantec_Client_Security\Symantec AntiVirus\DefWatch.exe
C:\Program Files\Symantec_Client_Security\Symantec AntiVirus\Rtvscan.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\WINDOWS\System32\PGPserv.exe
C:\WINDOWS\System32\ScsiAccess.EXE
C:\Program Files\VentSrv\ventrilo_svc.exe
C:\Program Files\VentSrv\ventrilo_srv.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\SOUNDMAN.EXE
C:\Program Files\NVIDIA Corporation\NvMixer\NvMixerTray.exe
C:\PROGRA~1\SYMANT~1\SYMANT~1\vptray.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\PROGRA~1\Grisoft\AVGFRE~1... Read more

A:"Byte.Verify", "Downloader" virus, and endless popups

Also Backdoor.DSNX, Dropper.Agent.PP and Trojan.Dropper

Was looking around in the root C drive and found some interesting things there as well, but didnt want to do anything without advice first. Heres a "dir" listing

07/22/2006 04:38 PM 586,928 626_101newer.exe
09/25/2005 11:25 PM 219,412 adlog.txt
07/22/2006 08:44 PM 627 asdf.txt
07/26/2004 06:18 PM 0 AUTOEXEC.BAT
08/26/2005 07:53 PM 11,859,569 AVG7QT.DAT
07/26/2004 06:18 PM 0 CONFIG.SYS
07/26/2004 06:28 PM 10 csb.log
05/17/2006 10:47 PM 81 CTX.DAT
07/22/2006 04:37 PM 73,728 dfndred_7.exe
07/22/2006 04:38 PM 27,648 dist13.exe
07/26/2004 06:22 PM <DIR> Documents and Settings
06/30/2006 10:41 PM <DIR> Downloads
07/22/2006 08:44 PM 32,768 drsmartload.exe
07/22/2006 08:45 PM 20,480 drsmartload45a7d.exe
07/22/2006 08:45 PM 20,480 drsmartload46a7d.exe
07/22/2006 08:45 PM 20,480 drsmartload849a7d.exe
07/22/2006 08:45 PM 578,560 Installer3.exe
07/22/2006 08:45 PM 290,816 installerwnusnewer.exe
11/16/2004 05:11 PM <DIR> KPCMS
07/22/2006 04:37 PM 28,672 kybrded_7.exe
07/29/2004 02:16 PM <DIR> mj-comp-files
07/22/2006 08:45 PM 25,105 MTE3NDI6ODoxNg.exe
07/22/2006 08:44 PM 25,105 MTE3NDI... Read more

19 more replies
Answer Match 100.8%

First things first, thanks to all who can help.....





I need to programmatically make some adjustments to the Internet Explorer security settings. Most of these settings I have found but there are a few I have not been able to get a clear exact location for in the registry. I will be using a .BAT file to make
the adjustments on 100+ PCs.





Here is what I am looking for.....





Under the "Internet  Properties" found in control panel, under the "Privacy" tab there is an "Advanced" option button. When I click on it I get an "Advance Privacy Settings" options box. On it are several settings.
The first setting, "Override automatic cookie handling" needs to be checked in order to access the other options. I can do that by adjusting the DWord value of "PrivacyAdvanced" under the "Internet Settings" key in the registry,
"HKCU\Software\Microsoft\Windows\CurrentVersion\Internet settings", to be specific.





What I have not been able to find are the registry entries for the "First-party Cookies" "Accept, Block, or Prompt" options, the "Third-party Cookies" "Accept, Block, or Prompt" options, and the "Always allow
session cookies" check box. Please see picture below....















I have seen references to the following settings as being where those options exist, but nothing that explains ... Read more

More replies
Answer Match 100.5%

The System Fix Virus & Privacy Protection Virus hijacked and infected my system: WinXP (64-bit). They've caused my default web browser to change frequently (each time I reboot my PC). So I've been having trouble getting rid of all of this malware/viruses from my system, since I use Windows XP x64.

ComboFix.exe and TDSSKiller.exe are not compatible with my Windows XP 64-bit system. So how do I get rid of the malware/viruses from this computer without those apps that were made to get rid of the following problems on other Windows OS's?:

The latest version(s) of ComboFix and TDSSKiller don't work on the 64-bit version of Windows XP, but they are compatible with other versions of Windows: 98, XP, VISTA, 2000, 2003, 2008 and Windows 7!

1. System Fix Virus (the first virus that affected my Windows system, 2 days ago.)
2. Privacy Protection Virus (behaves almost exactly like the aforementioned virus)
3. Google-Redirect Malware (redirects all my searches to this site: 63.209.69.107)

Thanks in advance to ANY users for helping me and others with this malware/virus problem: I understand and read the previous pinned-thread about the revelant malware/virus issue that Windows-users solved with the programs I've been unable to install on my system. The aforementioned malware/viruses began to infect my PC on December 14, 2011 (since that day, I haven't found a single anti-virus program that can detect the Google-redirect malware/virus on my system).
&nbs... Read more

More replies
Answer Match 99.6%

A friend's computer... total nightmare... she doesn't know much about computers, and it seems thoroughly messed up. Tried installing Windows Defender, and it couldn't find her "My Pictures" folder so it didn't install. So I looked under her My Documents folder. It's missing the My Pictures and My Music folders. Plus, the other folders that are there, such as My Videos, etc., their icons are not special, they look like ordinary folders.

Her computer's "Shared Documents" section looks fine, with all the usual folders with special icons, etc.

Any thoughts?
Computer: HP Pavilion dv1000
OS: XP2
 

A:"My Pictures" and "My Music" folders are missing

Try a system restore to an earlier date before the problem started.
 

3 more replies
Answer Match 99.6%

Something funky is going on, I cant find my "c" drive that normally would be listed in My Computer.

Any way that I can find it. It doesnt show up in "Windows Explorer" either.
From what I can tell, neither is it 'hidden', as administrator of the computer (I have 3 logins on Windows XP), all hidden files are showing when I log in.

H.....E.....L.....P !!!

LexxieGirl
 

A:Solved: "C" drive missing in "My Computer"

The 'C' drive is still missing from 'my computer'
I am able to access it by typing c:/ in the address bar
but there are hidden files somewhere
where can I 'un-hide' them and
where do I look?

simple but confusing stuff
time to get a computer for the kids so that they dont screw up mine!!

Lexxie
 

1 more replies
Answer Match 99.6%

When I click on "tools" on the menu bar in any folder that I am exploring and subsequently click on "folder options" I notice that the "view" tab is completely missing. The only tab I have access to is "file types"

This creates a serious problem when dealing with hidden folders that were hidden prior to me having knowledge of this "view" feature being absent.

What are my options to restore this "view" tab so that I can view the hidden files that I need access to?

TIA
 

A:"View Tab" in "Folder Options" missing

Other than a system restore, I don't know how to restore the view tab. I can tell you how to enable the hidden files and folders from the registry.
Start> Run> type: regedit and hit OK. Navigate to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\
Advanced
Click on Advanced folder in the left pane and look for Hidden in the right panel. Set the value to 1 to show and 2 to hide.
If not there, create DWORD value with Value name: Hidden and set the value as above.

Edit: Forgot to add, you need to restart computer for settings to be changed.
 

1 more replies
Answer Match 99.6%

Even though the tutorial on this forum says there should be a custom option, I don't seem to have it.

Any thoughts on how can I bring it back?

P.S. Does anyone know what that "winrt--{***}-" folder is?

A:"Custom" option missing from "Search again in"

Anyone? Is it the same on your machines too, or just me?

3 more replies
Answer Match 99.6%

Let's say I have a folder in my Documents somewhere called "thisisit".
Within "thisisit" folder, I have other folders, each named for a student in my class.

When I go to Start > Documents and navigate to "thisisit", I don't see any folders, but I do see all the files from all the folders. It's as if my computer took all the files from the folders, removed them from the folders and copied them into the parent folder "thisisit", and then deleted all the subfolders, named after the students.

However, if I navigate to that same "thisisit" folder, through a software like Photoshop or 3ds Max, I DO see all of the subfolders, which are named after the students.

This just happened in a moment. As in, I was navigating through the folders one moment, then I went to the parent folder a second later, and voila! no subfolders.

Anyone know what happened???
 

A:Folders "missing" in "explorer" but not through via software.

When I go to Start > Documents and navigate to "thisisit", I don't see any folders, but I do see all the files from all the folders.Click to expand...

Look at the top right of the Windows Explorer window. If you see "Arrange by: Folder <down arrow>" I don't know what's wrong. If the window is arranged any other way, change it back to "Folder."
 

2 more replies
Answer Match 99.6%

Peace be upon all of you.
Hello and greetings.

My laptop is ASUS model A455L. My CD/DVD drive was working fine until one moment it disappeared from both "This PC" folder as well as from "Device Manager". It happened while I was burning a CD with Ashampoo Burning Studio 15. My current OS is Windows 8.1 (as what it was as when I purchased this laptop), and I do not upgrade/downgrade to any other OS.

I went through searching the internet for the solutions for weeks but failed to solve the problem.

1. Among the suggestions found on the internet is to delete the upper and lower class filters, but mine is not involved as it does not have any entry that says upper or lower class to begin with.

2. Another suggestions that I had tried was the addition of the following in the Registry:reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" /f /v EnumDevice1 /t REG_DWORD /d 0x00000001"
I did the registry entry of the above by command prompt (admin) as well as manually in the regedit but failed to produce the results.

3. Initially when this problem occurred, the item CD/DVD Drive was still visible in the Device Manager but under the "Show hidden devices" option turned on. The information below was gotten from the properties of the device:Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
My optical drive is an internal, built-in ... Read more

A:CD/DVD Drive missing from "My PC" & "Device Manager"

First, there are no drivers for CD/DVD drives except the built in Windows drivers.

Since the device is not being detected by Windows, either there is some type of hardware problem or the BIOS is not detecting it (If the BIOS does not detect the drive, Windows will not detect it).

A BIOS reset is the easiest thing to do. Most BIOS have an option to reset it to the defaults. I would try this first.

If the BIOS reset does not fix it, there is some type of hardware problem. Whether its a connection problem for the drive (there are two connectors, data connection and power connection) either at the drive end or at the controller end (motherboard end). Or if the drive itself has failed. Unfortunately with a Laptop, accessing the connectors may require complete disassembly of the laptop.

3 more replies
Answer Match 99.3%

I was looking at these freeware AntiVirus program's to replace InoculateIt. The Company is ending InoculateIt support in May.
:
"Avast!" (ALWIL Software); "AVG" (Grisoft)
:
Both seem to get pretty good ratings, and I was thinking of getting one of them, then getting Norton AntiVirus when I have the extra $$$ available.
:
Any opinion's as to their ability to stop unwanted stuff from getting in, ease of setup & use would be appreciated.
One thing I've noticed is AVG only issues updates monthly--and I think Avast! is the same--is this often enough to effectively defend against new virii?
:
Will be using whichever one I get with ZoneAlarm (Freeware) Version 2.6.231
 

A:"Avast!" and "AVG" Anti-Virus program's. Opinion's?

7 more replies
Answer Match 99.3%

Could anyone explain the differences to me.
Also, does anyone know a good piece of virus toolkit that can actually remove them as well as prevent them?

T.I.A.
 

A:Difference between a "virus removal tool" and a "patch"?

A virus removal tool removes the virus from your computer meaning that the file is already on your system and running, so it stops it from running and removes the file. A patch however is used to prevent bad things from being installed, usually released when big worms hit, like SoBig, MSBlast, CodeRED...etc...So patches are to prevent and removal tools are to remove files already installed.
 

2 more replies
Answer Match 99.3%

I believe i have the Adclicker virus, however neither my Adaware or my Norton Antivirus has found it. I get popups continously and I have noticed the IEXPLOER.EXE running. When i delete it, Size File.exe runs and reloads IEXPLORER.EXE. I have done a search for Size File.exe and deleted it then deleted IEXPLORER.EXE but then SIZE FILE.EXE appears again and I go through the whole cycle again. Please help me delete this sucker. I have also ran CWShredder and it didn't find anything (not sure if i ran the right one though). Please help! Thank you.

Here's my HijackThis file:

Logfile of HijackThis v1.99.1
Scan saved at 9:19:25 AM, on 11/2/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\Program Files\Common Files\Symantec Shared\AppCore\AppSvc32.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\WINDOWS\RTHDCPL.EXE
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files... Read more

A:Virus: "IEXPLORERE.EXE" & "Size File.exe" - Can Anyone Help Remove?

9 more replies
Answer Match 98.7%

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

A:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

1 more replies
Answer Match 98.7%

Hello everyone
I have this problem for more than 3 months for now...

The INSTRUCTION AT "0x00a96ce0"referenced memory at "000000000" couldn't be written".

That's always what i get when i restart my computer,just before screen goes dark.
I believe that it has to do something with Microsoft updates.The reason i believe this, is that i once reinstalled my PC and didn't have any problem until i didn't update my PC.
And i posted here that thinking my problem was solved but unfortunately i was wrong.

Please if you have any tips on this one let me know it would be greatly appreciated.

Thank you!
 

More replies
Answer Match 97.8%

I'm posting this in the Vista forum because this has never happened with Windows 2000 or XP.

I bought two exact duplicate models of hard disks. I set up Vista Ultimate on one of my systems. I used Acronis True Image 10 to clone the operating disk to the factory-new, never-used, same model disk as a backup drive in the event the first disk failed. I put in the clone to be sure it runs; but, I get the error mentioned in the title of this thread.

Now, if the second disk is supposed to be a clone of the first, why does this happen and how can I fix it?

I'm not married to Acronis for this job so I would use any disk cloning tool that makes a sector-for-sector copy. I use Norton Ghost 2003 for making sector-for-sector raw image (forensic) copies of PATA drives; but, these are SATA drives and Ghost 2003 simply sits there like Tarbaby and he don't say nuttin' to no SATA drive.
 

A:"Windows failed to start" "\Windows\System32\winload.exe missing or corrupt"

7 more replies
Answer Match 97.8%

How do I change the font of "Welcome", "Logging Off" and "Shutting down"? Is it hard coded in a uifile? Which file are the words in? Is the file written in XML?? John

A:Change font of "Welcome", "Logging Off" and "Shutting down"?

  
Quote: Originally Posted by RBCC


How do I change the font of "Welcome", "Logging Off" and "Shutting down"? Is it hard coded in a uifile? Which file are the words in? Is the file written in XML?? John


I am not sure you can change the fonts though if you wish you can change the text from "Shutting Down" to "Bye Bye" or so, by editing, winlogon.exe.mui.

3 more replies
Answer Match 97.8%

OK...
I'm looking for some help getting rid of theses creeps!
I have tried several programs including Spybot, Spyblaster, Lavasoft, Mcafee, etc. etc. with no luck.
I'm new to HijackThis but here we go..... ]

Logfile of HijackThis v1.97.7
Scan saved at 11:59:09 AM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)SIZE=5]

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE
G:\HijackThis.exe
G:\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Mi... Read more

A:(I'm new here) help w/ "xads", "xlime", "Context3.kanoodle"

hi pdx

please download the new hijackthis from here
http://www.majorgeeks.com/download3155.html


and install it in it s own folder like this :

C:\hjtantivirus\hijackthis.exe

scan again with the new hjt and post a new log .

1 more replies
Answer Match 97.8%

Hey everyone,

Unfortunately, my computer has been infected with a particularly virulent, or relatively new, virus (for which I am currently awaiting help on the Malware removal sub-forum). I wanted to ask, though, if anyone else has had to deal with this particular Trojan before because, from what I have been able to find out, it (i.e. Trojan_Win32.Generic, or "TidyNetwork.com") doesn't seem to have a remedy as of yet. I've checked just about every virus database I could and have come up empty handed every time. What's more, I've downloaded and ran half a dozen different top-shelf Anti-virus' scans and removal programs, only to end up disappointed.

Does anyone know what the deal with this thing is?

Best,

John
 

A:"Trojan_Win32.Generic" a.k.a. "TidyNetwork.com" & "Strongvault"

Please do not start another thread for the same issue.

I'm sure someone will be along to help you in your other thread soon.

Closing duplicate.
 

1 more replies
Answer Match 97.8%

Hi - I have a thinkpad x61t. When it's in the docking station, whenever I press "shift" "alt" or "ctrl" a little pop up window tells me that key is being pressed. The laptop does not do this when it's out of the docking station. I've looked all over the control panel in vista and can't find any setting.

Any ideas how to switch it off? Driving me nuts! Thanks.
 

A:"shift", "alt", "ctrl" appear onscreen when pressed (see pic)

You mentioned that you have looked in the Control Panel so this may be something you tried already:

Control Panel - Ease of Access Center - Make the keyboard eaiser use - uncheck 'Turn on sticky keys'.
 

2 more replies
Answer Match 97.8%

One feature I really liked in XP was the ability to look in a folder through My Computer and sort the files by extension. For example if I wanted to get all .jpg files to one side of the folder as I looked for a file, I could click View, Arrange Icons By, Type and make that happen. I don't see that feature in Windows 7. I'm using W7Pro and can't find that or a similar feature anywhere. Is it here and I just haven't found it? TIA

A:Where is "VIEW", "ARRANGE ICONS BY", "TYPE"

open a window ,click organise/layout /menubar.
then when you click view in the menu bar group by is in the list

3 more replies
Answer Match 97.8%

hi. i'm new here. nice to meet all of you!
just like a lot of folks i'm sure, i've come here because there are some weird things running on my pc that shouldnt be in there.
please help!!!!!!

heres the hijack log
(thanks in advance. i don't know much about this computer virus stuff.)
~eric

Logfile of HijackThis v1.99.1
Scan saved at 10:06:40 AM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Dantz\Retrospect\retrorun.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\SYSTEM32\qttask.exe
C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\PROGRA~1\VERIZO~1\HELPSU~1\VERIZO~1.EXE
C:\PROGRA~1\VERIZO~1\HELPSU~1\SMARTB~1\MotiveSB.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\PROGRA~1\Sony\SONICS~1\SsAAD.exe
C:\Program Files\Common Files\Verizon Online\ConnMgr\cmisrv.exe
C:\Program Files\Windows Media Components\Encoder\Wmencagt.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\ZoneLabs\isafe.exe
C:\Program Files\Common Files\Verizon Online\AppMgr\vz... Read more

A:"windows no disk" and "winsilly" "win956temp"

11 more replies
Answer Match 97.8%

Hey guys. This morning I got a really strange error code. When I tryed to update Steam on my PC, this error message popped up;

"The instruction at "0x00172058" referenced memory at "0x00d1004". The memory could not be "read".

Click OK to terminate the program.

Lately, I have'nt been able to install WoW either, I install it all the way to 100% and then when I try to launch it, I obviously have to re-download all the patches but it prompts me that I have to install it again, even though it is all there.

Tryed downloading the full game digitally off of wow-europe.com too, I click run to get it started, nothing happens and then this message pops up.

"The instruction at "0x00182058" referenced memory at "0x0f070014". The memory could not be "read".

Click OK to terminate the program.

I don't know what's up with it. My freind told me to run a CHKDSK /R to see if there was anything wrong with my drive and it ran smoothly, although I must say it took about an hour or so.

So, that was complete, tryed to do it again and I still kept getting these error messages. But I saw something on my desktop that wasn't there previously. It is an error log. Here is the error log;
#
# An unexpected error has been detected by Java Runtime Environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d5ecb6d, pid=1584, tid=1248
#
# Java VM: Java HotSpot(TM) Client VM (11.0-b16 mixed mode, sharing wi... Read more

More replies
Answer Match 97.2%

Hello
I have been experiencing some problems with my computer recently. Firstly, my virus scanner (AVG) keeps on finding a virus called 'not-a-virus:RemoteAdmin.Win32.WinVNC-based.f' and some trojans called 'Trojan.JavaClass'. I have also been getting random pop-ups whenever I have been browsing the internet, and my computer seems to be running very sluggish, especially at startup.

I also believe that, last week, someone gained remote access to my computer, as all of a sudden, my mouse wouldn't move properly and the computer became really slow. This only stopped when I engaged the internet lock on my Zonealarm firewall.

Today, I was asked by Zonealarm to give a program called spoolsv.exe "access to privileged rights" which I have never seen before for this program. When I looked at the properties of spoolsv.exe, it said that it was created in 2006 but modified in 2005 (???), and so therefore didn't allow the program access. (I don't know if that has anything to do with the problems that I am having but thought I would mention it)

I have done "the 5 things you need to do" before posting a blog; here are the files requested:

Panda Scan:

Incident Status Location ... Read more

A:[SOLVED] &quot;not-a-virus&quot; virus and &quot;javaclass&quot; trojan keep appearing on virus scans

Bump.

4 more replies
Answer Match 96.9%

I just upgraded from Vista Home Premium to Win7 professional x64 hoping to fix the above mentioned problem. After a complete re-install Im getting the same errors.

Im not sure of the proper terminology here, but during startup the computer does a scan of all hardware and "Volume 0" has a "failed" message.

The odd thing is that sometimes after a few restarts and pointless boot menu visits the computer starts up fine.

I tried windows repair feature by booting from the disk, but when I get to the window where i select the operating system to repair, its empty. Drive C, where the operating system is, is not showing.

I have a feeling that the hard drive itself has gone bad and is very unstable. Please let me know if I'm missing something or we just need to get a new HD.

Thank you

A:Win7 pro startup error "Boot MGR missing"/"Operating System Not Found

What type of hdd do you have. For example if you have a Seagate drive, there is software you can run to do a diagonostic on the hdd before the operating system boots.
This would be a good idea, especially if you were having same issues when Vista Home Premium was installed first.

Do you have more than one hdd installed. If yes, make sure in BIOS settings, the proper drive is selected for First Boot. And better yet make sure its the only drive attached when booting.

9 more replies
Answer Match 96.9%

Made a HUGE mistake, messed with the settings under "My Computer" > "Manage" > "Services> and also the "Local Users". Now having trouble, can not see my "Start and Task Bar", the "windows"+ ''e" is no longer working.

How can I restore the Services & the Local Users account without having to reinstall my whole computer? I am afraid I will loose lots of files... I do not remember what exactly I changed, but some of the "Services" I changed to "disable" now when I try to open properties and change them back, I am unable. The right click to get to properties is not working.

Your help is highly appreciated.

A:How to restore the defaults for "services" under "My Computer" > "Manage>

I am not sure about the "quick" way of restoring, but what you can do is go back to services, "RIGHT-CLICK" the white area select "HELP" then the third option is "Default settings for services"

you can see what the default was and manually restore it. I have tried to copy and paste it below

==========================================================

Service Startup Type Log On As Additional information
Alerter Manual Local Service
Application Layer Gateway Manual Local Service
Application Management Manual Local System
Automatic Updates Automatic Local System
ClipBook Manual Local System
COM+ Event System Manual Local System
COM+ System Application Manual Local System
Computer Browser Automatic Local System
Cryptographic Services Automatic Local System
DHCP Client Automatic Local System
Distributed Link Tracking Client Automatic Local System
Error Reporting Automatic Local System
Event Log Automatic Local System
Help and Support Automatic Local System
IMAPI CD-Burning COM Manual Local System
Internet Connection Sharing Manual Local System
IPSec Services Automatic Local System
Logical Disk Manager Automatic Local System
Logical Disk Manager Administrative Service Manual Local System
MS Software Shadow Copy Provider Manual Local System
Net Logon Automatic Local System
NetMeeting Remote Desktop Sharing Manual Local System
Network Connections Manual Local System
... Read more

3 more replies
Answer Match 96.9%

Hi guys i inserted my brother's usb/pen drive /stick in to my computer a week before and just after inserting the pen drive a dialogue box or screen appeared which says ''gotcha you" and "you are in my control".

this same virus caused my brother's laptop to go haywire around two months ago.it slowed the whole OS of that laptop like opening media player took like a couple of minutes also the mouse cursor acted weirdly.so i had to format the laptop's hard drive and reinstall XP.

now i am worried this virus slowing my pc down too.but i really don't want to format and reinstall my XP as all my games and programs are installed and finely tuned.

so anybody knows what is name of this virus/Trojan/spy ware(?) and which anti virus software can successfully detect,remove/delete it from my pc?
I already tried AVG free edition but it can't even detect it and again please tell me the name of this virus if you know so that when the right anti virus software detects it i can delete or remove it with certainty.

thanks for reading my big post

A:Virus says "Gotcha you" and "you are in my control" it's from Usb/pen Drive help

Hello and welcome to TSF.

It's not possible to determine the cause of the problem and to assist you without the proper set of logs.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

1 more replies
Answer Match 96.9%

hi,

i have tried a bunch of times tonight to run my "Ad-Aware" and wasn't able to, then i tried both my "HJT" as well as my killbox (just to see if it would load, didn't), and wasn't able to because of some "OLEAUT32.dll". i don't know if i am in the correct forum for help with this or not, but i thought it was worth a shot, if anyone can assist me i'd be grateful.
if i'm in the wrong forum please tip me off to that as well, as well as a hint which one to use, thanx!

i run windows me

i guess i shoulda said it said the OLEAUT32.dll, is out of date and those programs need a newer version
 

A:Solved: Can't run my "Ad-Aware", "HJT" or virus scan

Hi, You need the VB Runtime files to replace the newer OLEAUT32.dll file:

http://www.microsoft.com/downloads/...F9-B5C5-48F4-8EDD-CDF2D29A79D5&displaylang=en
 

3 more replies
Answer Match 96.9%

Maybe you can help... I found a virus or trojan (don't really know which) and was able to boot in safe mode and disable it at startup. I don't think it bothers my system anymore but I'd like to know a safe way to remove it, but when I look up either name above I find absolutely nothing.

When I look in System Config, under the Startup programs where I disabled this, it reads as:

Startup Item: gutigiwiz
Manufacturer: Unknown
Command: Runndll32.exe "c:\progra~2\yavuhoki\yavuhoki.dll",a
Location: HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

Has anyone heard of this, and can you give me a hand? I'd really appreciate it, thank you. ~RTG

A:Virus/Trojan -- "gutigiwiz" and "yavuhoki.dll"

Hi and welcome to TSF.

We want all our members to perform the steps outlined in the link given below, before posting for assistance.

http://www.techsupportforum.com/f50/...lp-305963.html

If you have problems with any of the steps, simply move on to the next one and make a note of the problem in your reply.

Please note that the Security Forum is always busy, so I would ask for your patience while waiting for a reply - it may take a few days.

This thread will now be closed.

1 more replies
Answer Match 96%

every time i try to open one of this folders a window apears with this content
cant have acces to C:\Documents and Settings\Mike\Local Configuration\{one of these folders} acces denied
this affects my IE i cant download nothing thru IE all my files on that locations i cant set dispaly pictures on WINDOWS LIVE messenger and all thinks that has anything to do with those folders
any suggsestions or idea
hope you can help me
pd ive scanned my computer and its all clean also i cant install windows XP serivce pack 2 im kinda stucked :/
 

A:cant open "temprorary files" "aplication data" "program data"

11 more replies
Answer Match 96%

"no audio device" "no playback device" "No Sound Card was found"
ok.. I'm stuck.. puzzled...

I recently had a professional computer fix it company wipe my computer and now I do not have any sound. I do not have even the little icon on the bottom left hand corner to turn volume up or down. My keyboard does not allow me to turn the volume up or down, it seems unresponsive to volume but does light up on the screen showing VOLUME... but of course, there is no volume... I am computer illiterate and thirsty for answers...

Operating System
Microsoft Windows XP Professional (5.1, Build 2600)
Media Center Edition Version 2002 Service Pack 3

System Manufacturer: HP Pavilion 061

System Model
Enclosure Type: Desktop
RC663AA-ABA a1640n

BIOS: Phoenix - AwardBIOS v6.00PG

Processor
Intel(R) Core (TM)2 CPU
6300 @ 1.86GHz (2 CPUs)

Memory: 2046MB RAM

DirectX Version: DirectX 9.0c (4.09.0000.0904)

Control Panel>Sounds and Audio Devices>Volume
indicates "no sound" and Device Volume is all the way to LOW and everything is GREY and untouchable/unchangeable

Control Panel>Sounds and Audio Devices>Audio
indicates "no playback devices" on Sound Playback

Sound recording is working fine as I use skype many times but I can not hear the other party but they can hear me just fine.

Starting with the BIOS, I went into Audio and made sure this was enabled.. it was...

downloaded/installed Microsoft... Read more

A:"No audio device" -- "no playback device" -- "no sound card was found"

STLj said:





<snip>
after RUN>
typing in "dxdiag"
DIRECTXDIAGNOSTIC TOOL>Sound
it reads under notes,
"No sound card was found. If one is expected, you should install a sound driver provided bv the hardware manufacturer".

This is where I get fuzzy and lost. Do I need a new sound card installed? Is that the problem?Click to expand...

That dxdiag "no sound card" message is misleading as I've found it says that if no driver OR sound card. I think you're missing the right driver

Also, it would seem from your post you have High Definition (HD) audio. Which means you'll need to find the right High Definition audio driver. (AC97 pre-dates HD audio so the Realtek AC97 couldn't be right)

Try starting on the HP support website HERE and enter your model number or they have a button where they'll try to identify your product and drivers for your model. They should list an HD audio driver there
 

1 more replies
Answer Match 96%

I did what was suggested on one of the "Solved" posts regarding this messy virus. Here's where I am. I probably started in the middle, I see, after reading many posts about this same problem.

Did the Smitfraudfix and forgot to save the text box info; can redo if necessary.

Did the Super Anti-Spyware, here is that info:

SUPERAntiSpyware Scan Log
http://www.superantispyware.com

Generated 10/14/2010 at 07:58 PM

Application Version : 4.44.1000

Core Rules Database Version : 5685
Trace Rules Database Version: 3497

Scan type : Complete Scan
Total Scan Time : 02:40:44

Memory items scanned : 619
Memory threats detected : 1
Registry items scanned : 9059
Registry threats detected : 43
File items scanned : 151710
File threats detected : 874

Trojan.SVCHost/Fake
C:\DOCUMENTS AND SETTINGS\COMPAQ_OWNER\APPLICATION DATA\MICROSOFT\SVCHOST.EXE
C:\DOCUMENTS AND SETTINGS\COMPAQ_OWNER\APPLICATION DATA\MICROSOFT\SVCHOST.EXE
[svchost] C:\DOCUMENTS AND SETTINGS\COMPAQ_OWNER\APPLICATION DATA\MICROSOFT\SVCHOST.EXE
C:\WINDOWS\Prefetch\SVCHOST.EXE-11D9B1DB.pf

Adware.MyWebSearch/FunWebProducts
HKLM\Software\Classes\CLSID\{1D4DB7D2-6EC9-47a3-BD87-1E41684E07BB}
HKCR\CLSID\{1D4DB7D2-6EC9-47A3-BD87-1E41684E07BB}
HKCR\CLSID\{1D4DB7D2-6EC9-47A3-BD87-1E41684E07BB}
HKCR\CLSID\{1D4DB7D2-6EC9-47A3-BD87-1E41684E07BB}\Control
HKCR\CLSID\{1D4DB7D2-6EC9-47A3-BD87-1E41684E07BB}\InprocServer32
HKCR\CLSID\{1D4DB7D2-6EC9-47A3-BD87-1E41684E07BB}\InprocServer32#ThreadingModel
HKCR\CLSID\{1D4DB7D2-6E... Read more

A:"Anti-Virus" Virus, Started on Fix from "solved" post, what now?

16 more replies
Answer Match 95.7%

Warm Greetings! And may I say a big Thank you to all of you who take the time to help those of us who aren't quite so bright when it comes to trouble shooting and FIXING our many computer problems.

OK - 2 start I'm glad to see that
A. I'm not the only one with this wierd problem, and
B. It doesn't seem to difficult to fix.

but before getting into the specs of my computer and the hijack log I wanted to ask, what exactly is this virus/trojan ? Do you have a spec list of it's "payload" and how can I avoid getting it again? (Also any idea why is there not more info on something like this on the web?)

I got it on my system simply from plugging my USB thumb drive in, (after I had plugged it into a workstation at a Cybercafe...yes I know not the smartest move) but seeing as it autoran itself and now I have infected 5 other computers at the center where I work, would really like to know what I can do in the future to avoid getting something like this.

NOD32 did not detect it, and after scanning with spysweeper and AdAware still not picking up any "bad signals" so is this just one nasty bugg that manages to fly below the radar?

Please let me know what info to send you in order to get the help in clearing it out, and should you have the time to answer any of the above questions I would be very greatful.

Best Regards

Archer
 

A:What is "Freedom virus" and I need help cleaning PCz

I'm sorry...it had been a real long day and when I posted forum wasn't very clear...

I have the same virus/Trojan as several others here... where it installs Systems.com in C:/Recycler and MyPictures.exe

Then it disables Regedit and Task Manager

And when you right click on any folder it says "If Freedom is outlawed, only outlaws will have freedom" + Just a Game etc.
Thanx in advance for the help...
 

1 more replies
Answer Match 95.1%

One lapse of judgement and I'm out of action for the weekend...
Anyway, I've run Avast and removed a number of viruses it found, but I still have these annoying popups, etc.
Log:

reLogfile of Trend Micro HijackThis v2.0.2
Scan saved at 08:49: VIRUS ALERT!, on 12/10/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\Program Files\Avast\Avast4\aswUpdSv.exe
C:\Program Files\Avast\Avast4\ashServ.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\PROGRA~1\Avast\Avast4\ashDisp.exe
C:\Program Files\D-Tools\daemon.exe
C:\Program Files\Winamp\winampa.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Java\jre1.5.0_06\bin\jusched.exe
C:\WINDOWS\CTHELPER.EXE
C:\WINDOWS\system32\RunDll32.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\WINDOWS\vVX1000.exe
C:\Program Files\Skype\Phone\Skype.exe
C:\Program Files\Electronic Arts\EADM\Core.exe
C:\WINDOWS\system32\WTablet\TabUserW.exe
C:\Program Files\VIA\RAID\raid_tool.exe
C:\Program Files\ATI Technol... Read more

A:Time changed to 24h and reads "VIRUS ALERT!" also various "Security Alert" popups

Apologies for the double-post. I could not see an edit function.
I've cleaned out a couple of nasties with Adaware, although i've not seen much change - still getting the same "VIRUS ALERT!" and popups. Still, I thought it best to update the log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 13:37: VIRUS ALERT!, on 12/10/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\Program Files\Avast\Avast4\aswUpdSv.exe
C:\Program Files\Avast\Avast4\ashServ.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\PROGRA~1\Avast\Avast4\ashDisp.exe
C:\Program Files\D-Tools\daemon.exe
C:\Program Files\Winamp\winampa.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\Java\jre1.5.0_06\bin\jusched.exe
C:\WINDOWS\CTHELPER.EXE
C:\WINDOWS\system32\RunDll32.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\WINDOWS\vVX1000.exe
C:\Program Files\Skype\Phone\Skype.exe
C:\Program Files\Electronic Arts\EADM\Core.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\ATI Technologies\ATI.ACE... Read more

9 more replies
Answer Match 94.8%

I am hoping that someone can help me with what may be a complex question.

I have a spreadsheet, similar to the demonstration file I have attached. In it, there are a range of columns. One set of columns (A - D), shows a list of numbers that are references to items in a store, and it also shows their location in the store, so it acts as a floor-plan. The next column (E) lists those items again to show the dollar amount that those items have produced in total sales (F).

So, what I'd like to do is to add a conditional formatting to show me the "cold" and "hot" spots on the floor-plan so I can see where sales are most concentrated. I would assume that this would be done with a colour scale (using the range of values in column F to work itself out)?

Either way, the figures in column F would change weekly, so the relevant cells in columns A - D would need to automatically change when they're matching cells in column E - F change.

I hope this makes sense, as it's difficult to explain, but any help that someone could provide would be greatly appreciated.
 

A:Solved: Creating Cell "Cold" And "Hot" Spots Based On Values In Microsoft Excel 2007

16 more replies
Answer Match 94.8%

How to remove the "Authenticated Users" "Create Folders" permission from the root of the C Drive via command-line?
I know this question has been asked many times before, but nothing works for us!
We tried the following:
Take ownership: I cannot take ownership using the Administrator account (local and Domain Admin accounts) of the root C:. Error Access Denied
Cuurent root C: owner is TrustedInstaller and acnnot be changed.
We cannot change or remove the Create Folders permission of the Authenticated Users of the root C: . Error Access Denied.
Drive C: is hidden via GPO, but many users can enter it from the File-Explorer and create folders in the root C:.
We do not want -for many reasons- to Block/ Prevent Access to C: via GPO.
We also tried to run cacls and/or icacls under the system-account (PSEXEC -i -s -d CMD). Error Access Denied.
icacls C:\ /deny *S-1-5-11:(NP)(AD)
Error Access Denied.
icacls C:\ /remove:g *S-1-5-11
Error Access Denied.
cacls c:\ /e /c /R "Authenticated Users"
Error Access Denied.
Also using GPO "Computer Configuration\Security Settings\Restricted Groups ..." does not work!
Now we have this issue on over 450 pc's on our network. Nothing work. Please help! How to remove the "Authenticated Users" "Create Folders" permission from the root of the C: Drive on command-line?


win_builder

More replies
Answer Match 94.5%

Hi,

I'm using Windows 10 th2-10511 x64 and when I install EMET 5.5 final the EMET system service is installed with the "delayed start" flag and the service and never starts after a reboot. The same thing happened with the beta version, I didn't notice
it until the final was released. This issue doesn't occurs with EMET 5.2.
I switched the service back to the normal Automatic (not delayed) start, and everything seems to be working again. I was wondering if anyone else experienced this issue?


Also, can someone enlighten me about this warning message "DEP/ASLR Policy settings are ineffective by default; see user's guide on how to enable them". It appears when I enable the DEP/ASLR EMET GPO. I couldn't find any reference to this warning
message in the user guide. DEP seems to be enabled, I have no idea how to check for ALSR other than Process hacker that shows ASLR as N/A.
Thanks

More replies
Answer Match 94.5%

Ok where do I begin?! I have been dealing with viruses, spyware/malware for the past week. It all started with Norton advising me that I had been infected with Trojan. Vundo and Trojan.Zonebac. After that I started receiving many different pop ups warning me about critical system alerts. I also had an annoying yellow triangle at the bottom of my screen warning me about different trojans and worms. More evil friends included 2 new icons that had made their home on my desktop one named "Live Safety Center" and the other "Online Security Guide", also installed was a new toolbar named "Security Toolbar 7.1". I have scanned my computer with many different programs and have somehow finally managed to get rid of the pop ups and toolbar, although I know I'm probably still infected somewhere. I'm sorry this is so long but, I wanted to explain EVERYTHING! I'm running Windows XP SP2, and have followed all steps to post. I downloaded DSS, but after many attempts to run, it just wouldn't let me. I do have a fresh hijackthis log and my Panda report, I hope this is good enough.
Many thanks in advance to whomever helps me, I am desperate!
Monica

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:58:35 PM, on 11/15/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe... Read more

A:2 evil friends on desktop "Live Safety Center" and "Online Security Guide" Help?

Hi, thanks for trying to perform all the steps.


Quote:




I downloaded DSS, but after many attempts to run, it just wouldn't let me.




At what stage does DSS stop working?

7 more replies
Answer Match 94.5%

Hi, I am having a problem with my newer computer, I just got this rig a few months ago and never had a problem until last Thursday. It Blue Screened on me while I was installing ARC GIS 10.1. From then on it randomly crashes. (I have previously installed ARC GIS 10 and never had a problem.)

I keep things updated (windows and drivers) and I do think windows forced through an update earlier that day. I un installed ARC GIS 10.1 and the windows update, didn't make any difference. I have also ran the Windows Mem test and Auslogic BoostSpeed/ Registry repair. I keep getting "Bad Pool Header" and "Page In Nonpage Area" and I can't seem to find something that triggers it. So far it hasn't crashed in Safe Mode without network access. I tried it once with access and it crashed. Currently have windows checking the drives for errors ( I have 4).

I think I attached the proper dump files. This is my work computer so this is kind of causing a big problem. Thanks in advanced for the help!!

A:BSOD "Bad Pool Header" and "Page In Nonpage Area" Runs in Safe Mode

Welcome aboard.

The crash dump you supplied, suggests the display driver failed there.

Code:
fffff880`0c995858 fffff880`10018000Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x980000
Go to Drivers - Download NVIDIA Drivers, follow option two to search for the appropriate driver for your system automatically, and install it.
Let us know how it worked.

3 more replies
Answer Match 94.5%

Hey folks,

My first post on here but I'm in serious trouble. I got a "new" (to me anyway) desktop running XP today and found the audio hardware wasn't working. So I pillaged an old machine for its sound card, and inserted that onto the motherboard. Also connected the Aux and CD lines to the top of the daughterboard.

Since then, to my horror, the machine has failed to boot. All plugged in, keyboard working, screen on and being used on another box for this very post. All I get now is the usual chirps from the internal soundcard followed by a few very low notes, definitely depressing so I guess they're suggesting something's failed. There's no further action from the CPU, the fan still works, but there is no screen output whatever.

Have I fried the motherboard without realising?!

Also, ironically, the last failure tone was delivered by my speakers through the originally non-responsive audio hardware!

I'd love a bit of help on this one, because my knowledge of computers' insidey bits is pretty poor.

Many thanks,

Joe.
 

A:Desktop boot problem after sound card "meddling"... just a "beep" failure tone.

6 more replies
Answer Match 94.5%

hello,

This site helped me cure my Laptop in the past and now I am in the process of aiding a friend whose IE is being hijacked to a suspected Anti-malware site for a product known as "Ultimate Cleaner 2007". He also keeps getting repetative pop-ups for an alleged virus known as "Worm.Win32.NetSky" which redirects you again to an unknown site.

here is his HJT log:

Logfile of Trend Micro HijackThis v2.0.0 (BETA)
Scan saved at 8:27:09 PM, on 11/11/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Synaptics\SynTP\SynTPLpr.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\HPQ\Quick Launch Buttons\EabServr.exe
C:\Program Files\Java\jre1.6.0_01\bin\jusched.exe
C:\Program Files\HPQ\HP Wireless Assistant\HP Wireless Assistant.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\Program Files\Hp\HP Software Update\HPWuSchd2.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\Program Files\HPQ\shared\hpqwmi.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Docume... Read more

A:HJT log for "Ultimate Cleaner 2007" browser hijacking and "Worm.Win32.NetSky" warning

Welcome to TSG

Please download SmitfraudFix

Double-click SmitfraudFix.exe
Select option #1 - Search by typing 1 and press "Enter"; a text file will appear, which lists infected files (if present).
Please copy/paste the content of that report into your next reply.

Note : process.exe is detected by some antivirus programs (AntiVir, Dr.Web, Kaspersky) as a "RiskTool"; it is not a virus, but a program used to stop system processes. Antivirus programs cannot distinguish between "good" and "malicious" use of such programs, therefore they may alert the user.
http://www.beyondlogic.org/consulting/proc...processutil.htm
 

3 more replies
Answer Match 94.5%

Hi guys. I noticed that in Win7, the applications in the new Quick Launch move if you run one of the applications in the "Pinned to Taskbar" section. For example, if I have Windows Explorer and Firefox next to each other and I click to open Windows Explorer, the Firefox icon will slide far to the right so that it's after the Windows Explorer task in the taskbar.

Is there a way to keep the new quicklanuch icons in Win7 in the same place, like WinXP?
 

A:Force Apps "Pinned to Taskbar" ("Quicklaunch" in WinXP) stay next to Start Button

10 more replies
Answer Match 94.5%

OK fellow "computer-holics", here's a difficult one for ya. I have a user who e-mailed me the following:

"Ever since I downloaded Crystal Graphics' "PowerPlugs v 1.2" (powerpoint plugin software I purchased which allows for 3D motion graphics on slides), Microsoft Powerpoint won't allow me to access "Slide Color Scheme" or "Apply Design Template" from the format menu...."

I've tried completely removing Office, and re-installing it, but to no avail. I have yet to find an uninstaller for the "PowerPlugs" software, so I haven't tried that yet. (I wan't to save that as a "last-resort" anyway....even when I DO find an uninstaller). Does anyone know anything about the PowerPlugs software that could help out in this situation? Thanks in advance for any help.
 

A:Unable to access "Slide Color Scheme" or "Apply Design Template" in Powerpoint

I can only suggest that you use this form to contact the vendor of PowerPlugs:

http://www.crystalgraphics.com/main.support.asp

Whether you purchased it or not, it should certainly allow PowerPoint to continue to work.
 

2 more replies
Answer Match 94.5%

I have a chart in an Excel spreadsheet, and it has several "series" in it. Some of the series are charted as "lines", and some are "areas" that fill in the entire background of anything from 0 to the value I have entered.

I have one particular series that is showing up as an "area" but I want it to be drawn as a "line" instead, so it DOESN'T fill in the area below it. I currently have the "background" as "none", but now I have a line from the last value down to "0", and that's what I want to avoid...

Thanks in advance!
 

A:Solved: Excel 2003 - how to change a chart data series from "area" to "line"??

8 more replies
Answer Match 94.5%

Hello Guys and Girls,

My wireless internet connections are currently set to a manually configured status, but this means I am having problems connecting to other wireless connections with free (ie unsecured) connections. I have tried going to properties and ticking the "Let Windows configure my wireless network settings", but I get a dialogue box coming up telling me that not all of my changes have been made.

Any ideas? Thank you in advance.

Sukita
 

A:Solved: Changing wireless connection status from "Manually Configured" back to "Automatic"

Why don't we start with the make/model of the wireless router in use, as well as the wireless adapter or laptop brand. Also, what version and patch level of Windows do you use?

If you have XP-SP2, you can set the machine back to installation defaults using the following procedure.

TCP/IP stack repair options for use with Windows XP with SP2.

For these commands, Start, Run, CMD to open a command prompt.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log
 

3 more replies
Answer Match 94.5%

I recently built a call log database in Access 2007 for my team to use when calling agents on our top errors we see from a vendor's error report. My boss is requesting a report to see how many items have been resolved

I have a query started and I am trying to complete this task in a single query (if possible) instead of several queries (as I've done for a couple other things).

I have 3 tables I'm using: Assignment, AgtInfo and CallLog
Joins as follows: Assignment.st=AgtInfo.agcy_st
AgtInfo.agt_id=CallLog.agt_id

Fields in the results: Assignment.assigned_analyst, CallLog.rpt_mnth, CallLog.resolved

Resolved is a yes/no field. I've done a query that converts the -1 to a 1, so that the sum is a positive number for the "Yes" values. I'm not sure how to enter the expression to subract the "Yes" values from the total number of values (yes/no) to get to my "No" count.

Essentially, I'd like the results to display as:

assigned_analyst, rpt_mnth, CountYes_resolved, CountNo_resolved

Somehow the connection is just not clicking in my brain with everything I've read though searches. Any help is appreciated! Thanks!
 

A:Solved: Access 2007 Query: Return count of "Yes" and "No" values for Analyst/Report M

It is easier to add another column to counf the Nos, use
0 or is null
as the IIf statement and use a 1 to count them
 

3 more replies
Answer Match 94.5%

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

1 more replies
Answer Match 94.5%

As this question was never answered I'll post it verbatim with my own comments below,
See original post here;
http://forums.techguy.org/windows-vista/756093-flash-drive-s-active-light.html

In all operating systems up to Vista, the flash drive's "active" light turns off when I go through the disconnect procedure; but, in Vista, it doesn't. I have traditionally used this as part of my explanation to others (and a convenience to myself) about when to not to remove the flash drive from its USB port.

This is a problem common to all Vista systems I've seen.

Why does the light not turn off in Vista?

And, is there an easy way to correct this?

Additional information: I have eliminated this problem being hardware-related. I have loaded Vista onto one of my systems here that previously had Windows 2000, then XP on it and it was only with the loading of Vista that the problem developed on this system. Just to be absolutely sure, I did a restore of a previous image of Windows 2000 and the problem went away again. I put Vista back on and the problem came back. So, this is strictly a Vista problem.Click to expand...

I have had the same problem with every Vista system I have used and every flash drive (note this means SSD NAND flash not HDD's or card adapters). AS the last discussion degraded into useless questions about hardware and other OS's let's get a confirmation that someone out there actually has a flash drive that turns its activ... Read more

A:Flash drive's "active" light doesn't turn off in Vista when "safely removed"

have done a litte research and testing in my lab on several machines and have confirmd the problem. What it seems to indicate to me is that, in Vista, the light simply indicates power, not data transfer. Whenever I am transferring data, the light blinks.

While I have never actually tested it, I do not belive that the "safely remove" feature actually kills all power to the USB port in XP. If that is the case, then there is really no danger as long as vista has acknowledged the disconnect and knows not to try to write data to the drive.
 

2 more replies