Tech Problem Aggregator

"we can't reach this page" error

Q: "we can't reach this page" error

Hello everyone.
I am currently experiencing an error everytime I use my Microsoft Edge. Whenever I try to go to a site, I always end up with this error. The weird thing is, this issue only happens on certain websites (such as Facebook and Yahoo currently) and sometimes with Google. It likes to disconnect me often and I really don't want to have to deal with this issue anymore.

My internet works fine as my laptop (which I'm currently on) and phone can connect to it without issue. I don't know why it doesn't work on my desktop especially since its internet is Ethernet.

I tested this on other browsers to see if it was only on Edge but it turns out that chrome and firefox experience the same issue with different sites as well. For all three, I haven't been able to go on Facebook and Yahoo, and sometimes Google.

I know the problem is from my end because clearly, the sites are up. Is there any way to solve this or has anyone else found a solution to this?

I'm running Windows 10.

I've tried the following:
- ipconfig / flush
- ipconfig / reset
- ipconfig / release
- ipconfig / renew
- clearing caches and browsing history
- a full scan for malware using malwarebytes and windows defender, already removed/quarantined all threats, did this multiple times to ensure there were none left
- reinstallation of chrome and firefox and a reset of edge
- ipv4 - changing preferred and alternate dns address to 8.8.8.8 and 8.8.8.4 respectively
- checked to see if a proxy was up, no proxy


If I were to do a factory reset, would this solve the issue?

A: "we can't reach this page" error

Hi. Welcome to TSF.

You mentioned threats were found by Windows Defender and Malwarebytes. Were they actually malware or just PUPs? A broken Internet connection is one of the common after-effects of a malware infection, and post-infection repairs need to be done, assuming all of the infections have been cleared. I advice seeking a clean bill of health from the virus removal section, and after they declare your system free from infections, come back here and we will advice further if the problem isn't cured.

1 more replies
Answer Match 93.24%

first of all i have Legit W7 Ultimate and i been using my same type of OS installing since 2010 until now, i think there's nothing wrong with my system rig but maybe the HDD? its "Deskstar Hitachi 250GB" 2 year old HDD, i successfully installed my OS with it 3 months ago until a problem came were it keeps restarting its self when it reaches "Windows 7 Logo" with those 4 color thing flying around i have no other choice but to reinstall my OS and heres what i got so far

#1.i reinstall the OS with 64bit when i reaches "Completing Installation" it sudden stopped i waited about 40minutes+ and error sudden pops out says "Setup has stopped due to corrupt installation file. please contact vendor"

- this is new problem to me i dont know why im getting this error its very unusual problem i didnt get this before so

#2.i try my 2nd attempt this time its 32bit as soon as the installation completes i get an another error says something about use "SCNDSK" to check some startup errors, i reset my PC i did the "SCNDSK" after several scans finally everything is fine as it was i can use my computer, However there's one big problem most of my programs and files are only for 64bit that wont run on the 32bit that im using so i reformatted my OS again

-i knew this wasnt necessarily but i really have no choice i need to do this to save some time but i was wrong

#3.in my 3rd attempt i did the same thing as i did on 32bit (#2) believi... Read more

A:i'm getting a error when i reach "Completing Installation"

Hi,

What is the source of your Windows 7 installation? Is it a DVD that you purchased?

Regards,
Golden

9 more replies
Answer Match 85.68%

Many of the web pages that I open don't open correctly and give either a "Done, but with errors" message or an "Error on page" message in the lower left corner, including the MSN home page and Yahoo. Specifically, on Yahoo email, the buttons don't work because the code behind the buttons wasn't loaded. (i.e. when I double-click on the error and click Show Details, it says that the button is undefined). This happens on all the computers that I've tried around the monastery (about six of them). We are running Windows XP Home and use Internet Explorer 6 as the browser. I've tried deleting the internet temporary files and the cookies, but it didn't help. It seems to be a problem with our computers -- when I visited the public library, Yahoo worked fine on their computers.
I have submitted a troubleshooting request to Yahoo, but they were unable to help. Any suggestions, anyone? Thank you in advance!
 

A:"Done, but with errors" or "Error on page"

Welcome to TSG!

It sounds as though you just need to load the Java Runtime software, as most webpages require it.

http://www.java.com/en/download/index.jsp
 

2 more replies
Answer Match 85.68%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Answer Match 84%

Hi, I am having a problem with my newer computer, I just got this rig a few months ago and never had a problem until last Thursday. It Blue Screened on me while I was installing ARC GIS 10.1. From then on it randomly crashes. (I have previously installed ARC GIS 10 and never had a problem.)

I keep things updated (windows and drivers) and I do think windows forced through an update earlier that day. I un installed ARC GIS 10.1 and the windows update, didn't make any difference. I have also ran the Windows Mem test and Auslogic BoostSpeed/ Registry repair. I keep getting "Bad Pool Header" and "Page In Nonpage Area" and I can't seem to find something that triggers it. So far it hasn't crashed in Safe Mode without network access. I tried it once with access and it crashed. Currently have windows checking the drives for errors ( I have 4).

I think I attached the proper dump files. This is my work computer so this is kind of causing a big problem. Thanks in advanced for the help!!

A:BSOD "Bad Pool Header" and "Page In Nonpage Area" Runs in Safe Mode

Welcome aboard.

The crash dump you supplied, suggests the display driver failed there.

Code:
fffff880`0c995858 fffff880`10018000Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x980000
Go to Drivers - Download NVIDIA Drivers, follow option two to search for the appropriate driver for your system automatically, and install it.
Let us know how it worked.

3 more replies
Answer Match 82.74%

For the last 2 days, I am not able to access all google sites and facebook.com from my windows 7 PC. When I tried to access these websites, I am getting a blank page with the error message "500 internal server error -nginx". Can you please suggest me what could be the cause for this issue and how to resolve it. Thank you.

A:websites not loading - error on page "500 internal server error nginx"

See if this helps How Web site administrators can troubleshoot an "HTTP 500 - Internal Server Error" error message on IIS 4.0 or on IIS 5.0

or
http://pcsupport.about.com/od/findby...ervererror.htm

4 more replies
Answer Match 82.74%

OK, this is one WEIRD problem, but also extremely frustrating. I have a new Asus netbook computer running Windows 7 and on certain User Agreement screens where you have to agree by hitting a button on the bottom of the page, the screen is too "long" to even see, much less reach, the buttons!

I have tried fiddling with the "encryption" when I would right-click on it; I have tried to "grab" the screen's edges and shrink it--no luck!

On my Windows Live Messenger screen in "Options", I cannot hit the "Apply" buttons at the bottom of the page! I can only "grab" the pale blue border on top of the screen, and edge it up about a half-centimeter soi I can just see the tops of the buttons, but as soon as I let it go, the screen falls back down nd the buttons are inaccessible.

OK--is there a fix for this? Something that a noob like me doesn't know? This is maddening--to not be able to see PDF's sent in emails because I can't open Adobe Acrobat Reader. I wonder what ELSE I can't do with Windows 7?

Can anyone offer suggestion?!

A:Cannot reach "I Agree" buttons on User Agreement screen

Hitting the TAB key will advance the cursor one field at a time..

7 more replies
Answer Match 82.74%

So I just re installed windows 7 on my system. I have done this several times before, and I had a package of drivers which I would always use in the same order. In the past I have had no issues with this, it all worked smoothly. This time however, I have been plagued with blue screens and errors.

Among these is an issue with the Intel Graphics drivers. When I attempt to run the Intel Graphics installers, both straight from Intel, and from my motherboard manufacturer, I get an error "This computer does not meet the minimum requirements for installing the software". I am using the 64 bit version to go with my 64 bit OEM version of 7 professional, and I am using the HD4000 drivers for my ivybridge 3770k. The latest version I tried and failed with was Driver Revision: 15.31.3.64.3071, the latest on Intel's site. My other specs can be seen in my sig.

I have spent some time Googling for answers, but they generally involve solutions like "Uninstall your current version and re install the 64 bit version for your OS", but I haven't got a version already installed, and I am already trying to install the 64 bit version. Or "You aren't using the right version of the drivers", but I am virtually certain I am using the right version, unless I've forgotten which CPU I have.....which I haven't.

Has anyone else ever experienced and solved this issue, or does anyone know a possible solution?

Thanks,
Tom

A:Intel Graphics Driver "Do Not Reach Minimum Requirements"

Have you just tried running windows update to get the drivers ?

Why are you installing graphics drivers for the cpu, aren`t you using just the 7950 ?

9 more replies
Answer Match 82.32%

I am having the hijacked home page problem that others are having. However, my hijacking started with the "coolwwwsearch" and then went to a "youfindall.net" page that, as described before, cannot and will not be changed to my regular homepage, "youfindall.net" is the page I'm currently stuck on. I have read some of the instructions about downloading the 'Hijack This' program for the 'coolwwwsearch' problem, is this where I start for 'youfindall.net' too? I am a novice to these forums and am quite computer stupid, but, I can follow easily understood instructions. If I do complete the 'Hijack this' instructions and save the log somewhere, (where?), how do I 'show you its contents'? Please be as basic and clear in your instructions as possible. Thanks for the help. ALF64
 

A:Hijacked home page-"http://youfindall.net/" & "coolwwwsearch"

16 more replies
Answer Match 81.06%

Windows 7 Ultimate 32 bit
Whenever I visit a site and then return to it after sometime, I get the DNS error. I tried to disable the DNS pre=fetching in Chrome but that didn't work. This only happens when I visit a site for multiple times, after using ccleaner and restarting the browser, I can access the site again.

A:I keep getting the "DNS error and oops page" in google chrome when accesing sites for

Hi this is not really my thing but it would help if you could tell us the error you recieve then someone may be able to suggest a method of sorting this

1 more replies
Answer Match 81.06%

Okay, I have an A-Link RR24AP router to which im connected wirelessly. The problem is that I can't port forward anymore. I used to be able to do that and all the ports I have forwarded are currently working. When I try to forward new ports the same way I have forwarded them before, I get an error stating "ERROR: Error found on page". I haven't changed any router settings or anything so I have no idea what could be causing this.
 

A:Solved: RR24AP - Port forwarding: "Error found on page"

8 more replies
Answer Match 81.06%

help..
computer running slow!!! ran windows 1 care and didn't detect. my Internets loading really slowly and websites that usually load in couple of seconds now taking a couple of minites or sometimes it doesn't even load @ get the error of "page cannot be loaded.
alps pointing-device
has not passed windows logo testing to verify its compatibility
c:\touchpad.temp
cannot install this hardware
welcome to network diagnostics for windows xp
Firefox can't find the server
alps pointing-device
has not passed windows logo testing to verify its compatibility
with windows xp. (tell me why this testing is important.)
comtiniuing your instatliation of this software may impair
or destabilize the correct operation of your system
either immediately or in the future. microsft strongly
recomends that you stop this installation now and
contact the hardware vendor for software that has
passed windows logo testing.

c:\touchpad.temp
cannot install this hardware
there was a problem installing this hardware:
an error occurred during the instation of the device:
the driver cannot because it is either not
digitally signed in the appropriate manner.
contact your hardware vendor.
click finish to close the wizard.
Server not found

*welcome to network diagnostics for windows xp
this tool helps you identify and fix connection problems with your home network
for computers connected to the internet using a broadband modem (cable or dsl)
view last diagnostic log

*F... Read more

A:help.computer running slow!!! internet get the error of "page cannot be loaded."

.......

2 more replies
Answer Match 81.06%

Hey There,

Was just hoping someone knows wtf is going on here-

Some .chm files, when I try to read them with the default winXP .chm viewer, display the standard Internet Explorer "The page cannot be displayed" error page in the viewing pane. The table of contents is visible, however, just not the page data.

Now, if I copy the same .chm file to my desktop, it opens fine!

This only happens with some of my .chm files, although it is always the same ones- and they always work when I copy them to the desktop, just not when they are in the folders I keep them in.

The data is there, it just can't be accessed for some reason (if I use a .chm 'decoder' to decode the .chm files to .htm format, they work fine; however I don't want to have to mess with a hundred different .htm files just to read a book)

BTW, I have tried changing the filenames with no avail.

If anyone has solved this problem or has any suggestions I would be greatly appreciative.

-cds
 

A:CHM Files Selectively Give "page cannot be displayed" error!!!

6 more replies
Answer Match 81.06%

dear techguys,

I get tis IE7 message;

Internet Explorer cannot display the web page.

I can connect to the web and can use firefox etc - so problem is just with IE7.

I know a lot of people do not like IE7 but I dearly want to at least be able to use it.

no problems in the past but struggle to get to grips with this one - very perplexing! For past 48 hours therefore not been able to use IE7 because all i get is above message.

Any help appreciated.

is it a common problem? Have other techguys seen this one and solved it? I have searched the forum but have not found specific answers that fix this prior to posting this message.
mike9INCH
 

A:"Internet Explorer cannot display the web page" - error message, please can u help?

hi,

courtesy post.

thanks for the help.

problem solved, ie7 now working fine.

phew!

[if it helps others - i had to roll back ie a few days - i dont understand what went wrong but at least it is now useable! ]
 

1 more replies
Answer Match 81.06%

I finally got fed up and tried something. It worked. Here's what I did:

From "Start" go to "settings" and "Control Panel."

Click on "Add/Remove Programs." (Don't panic. We won't be removing anything.)

Select "Microsoft Internet Explorer 6 SP1 and Internet Tools." (Continue not to panic.)

Double-click on it and-- this is VERY important, as I don't know what headaches await if you get this wrong-- Select "Repair Internet Explorer," then "OK."

Follow the instructions, and you should be fine. I don't know if this works in XP, though, so proceed with caution.

More replies
Answer Match 81.06%

I was having display driver problems, which seem to be stable now, and Win2kpro in the hardware forum recommended that I post here now to check for malware.

What's happening is occasionally pages are loading slowly and missing some graphics. Once in a while, I am also getting "Website not found," and I have to hit refresh a few times to get to the page.

This happens whether I use IE, Firefox, or I even tried Opera for awhile.

Operating System Microsoft(R) Windows XP Professional
Manufacturer MEDIONPC
Model MS-6747
Number Of Processors 1
Processor Description Intel(R) Pentium(R) 4 CPU 3.00GHz
Total Memory 512MB
Total Hard Drive 149GB
Display MD7317TC, 17.1" (34cm x 27cm)
BIOS Version IntelR - 42302e31 Phoenix - AwardBIOS v6.00PG Phoenix-Award BIOS v6.00PG
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 6:59:43 PM, on 7/28/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16850)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Avira\AntiVir Desktop\sched.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Avira\AntiVir Desktop\avguard.exe
C:\Program Files\APC\APC PowerChute Personal Edition\mainserv.exe
C:\WINDOWS\ehome\ehSched.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program F... Read more

A:Slow page loading and "Website not found" error

6 more replies
Answer Match 81.06%

I don't know why, or what, is causing this, but everytime I try to open a mov, mp4, or swf file off the internet (a direct link to that file), it will load completely, then say "Error on page" in the status bar where a Javascript would normally give an error. I would really like to not have to download the movies I want to watch on the internet (mainly animations rendered out to mov form from C4D off a forum I frequent.) Is there some setting I can change to let the movie just play in the browser?
 

A:Quicktime movies and Flash SWF's reporting "error on page" in IE7

Reset IE

To use RIES in Internet Explorer 7, follow these steps:

1. Click the Tools menu, and then click Internet Options.
2. On the Advanced tab, click Reset.
3. In the Reset Internet Explorer Settings dialog box, click Reset.
4. When Internet Explorer 7 finishes restoring the default settings, click Close, and then click OK two times.
5. Close Internet Explorer 7. The changes take effect the next time that you open Internet Explorer 7.


Note If you cannot start Internet Explorer 7 for some reason, use RIES from Internet Options in Control Panel.

RIES restores the default settings of the following features:
? Home pages
? Search scopes
? Browsing history
? Form data
? Passwords
? Appearance settings
? Toolbars
? ActiveX controls
 

4 more replies
Answer Match 81.06%

can anybody help. im using windows XP and when i use internet explorer to access the mobile phone website www.02.co.uk it loads the toolbar down the side but the main page remains blank. also when i click on links it opens a new window which is blank. i have had errors saying "error on page, only part can be loaded" or something like that. i know the website works because i have accessed it on other computers. i use norton internet secutrity as a firewall and thought this may be blocking it. this is the only website i know of that has this problem and i would be extremely grateful if somebody could help me!
 

A:help..internet explorer showing error or "done" on blank page

GFo to add/remove programs and remove macromedia flash. Then reboot, visit here and install fresh http://www.macromedia.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash
 

2 more replies
Answer Match 81.06%

Why am I suddenly getting the message "error running scripts on this page- do you want to continue running scripts?" or something like that...it's an IE5 error messge, but it's coming up on OUtlook Express 5.
It's happening a lot and getting very annoying.
 

A:{SOLVED} why am I suddenly getting the "error occurred with scripts on this page"

6 more replies
Answer Match 81.06%

Searched for similar content but couldn't find same problem.............
Symptoms:
1/Home page resets itself to Google which seems odd.
2/If I click a link I get a popup error message:
"Cannot find '216.155.180.6/bc/navigate.html'.Make sure the path or Internet address are correct". Reclick and it goes to the site linked. Sometimes get same message with back button.
3/Outlook email downloads seem to be running very slow.

Ran SpyBot and Adaware. HJT log below.
WXP, Dell preinstalled Macafee security center, cable isp.
Logfile of HijackThis v1.99.1
Scan saved at 7:31:25 PM, on 4/5/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\brsvc01a.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\brss01a.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\PROGRA~1\COMMON~1\AOL\ACS\AOLacsd.exe
C:\WINDOWS\SYSTEM32\Brmfrmps.exe
C:\Program Files\LogMeIn\RaMaint.exe
C:\Program Files\LogMeIn\LogMeIn.exe
c:\program files\mcafee.com\agent\mcdetect.exe
c:\PROGRA~1\mcafee.com\agent\mctskshd.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MPFSERVICE.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\WLTRYSVC.EXE
C:\WINDOWS\System32\bcmwltry.exe
C:\WINDOWS\Explorer.EXE
C:\Program Fi... Read more

A:Solved: Home page issue + strange "cannot find..."error message

16 more replies
Answer Match 81.06%

Recently had my work laptop upgraded to Windows 7 from XP. Everything worked fine for one week. Then I started getting the BSOD error " Bad pool header". My computer will repeatedly shut down to protect windows. I notified my IT department and they believe that I corrupted the hard drive, as I have local admin rights. they provided me with a loaner computer and loaded my backup system on to this laptop. Worked great for a week and then again started getting " bad pool header and new error "page fault in non paged area. They believe I again corrupted the hard drive. The only software I installed is a program I use for work "Form Max" which other users have been using successfully in Windows 7. I used the DM log and have attached the dump files. Any assistance would be appreciated.

A:BSOD error " Bad pool header and page fault in non paged area"

Just discovered the original attachment was blank This one I checked and it does have files. Would appreciate any help that can be provided.
Thanks.

1 more replies
Answer Match 81.06%

When ever I try to go to a login page of any site Yahoo, Bank sites, ...
I get the internet explorer can not display page error
I know this is not uncommon but I can not seem to shake it
I don't know where to turn???

Help

[email protected]
 

More replies
Answer Match 80.64%

Win 7-64 on Gateway FX6860 i7 system 8gm ram tons of HD space.
========================
Got "Page Failed to Load" error attempting to change my Win7-64bit display resolution.
This used to work, but no more ( don't know what might have caused it)

I ran "sfc /scannow". SFC reported that there were corrupted files that could not be repaired or replaced and to look at CBS.log. I did but can make no sense out of it.

Please find that file attached -- Any help will be appreciated.....

thank you,
Chuck

A:"Page Failed to Load" error attempting to change my Win7-64bit display

Run the system file check again. Sometimes it requires multiple runs. Reboot after each run (or before the first run if you have not rebooted since the last time you ran the check).Run SFC /SCANNOW Command - System File Checker up to three times to fix all errors with a restart in between each. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations. Use OPTION THREE of SFC /SCANNOW Command - System File Checker to provide us with the sfcdetails.txt file if errors occur.

2 more replies
Answer Match 80.64%

This is another error I got today. Any help is greatly appreciated.
Mike
 

A:What is "Page Fault in Nonpaged Area" error?

9 more replies
Answer Match 80.64%

I love the Dev Preview so far. We were getting on so well. And then the (reimagine) blue screen of death shows up, with it's sad face. I thought I might have said something to upset it. "Shhh, it's okay winona, shhh" I said, stroking the screen comfortingly. And then she reboots. And BSOD's. Repeat X times till I also have a sad face on.

The error I'm getting is "Page Error in Non-Paged Area". This started after a BSOD relating to it falling idle for roughly 25 minutes (I've heard of other people getting this, but not my problem after). The system this is running on is an AMD Turion 64 X2 @ 2.1GHz, 3Gb DDR2 RAM, ATI HD3200, 250GB hdd. My standard issue test bed, since my Asus broke I've been using this in the mean time.

I've taken the HDD out and whacked it into my server (cause I'm just that cool), the file system is intact, ChkDsk doesn't find any integrity issues, and there's no bad sectors (allegedly). On top of this, the boot sector also seems in tact. I've done a test of both my memory modules, taking one out and testing the other on it's own - the error still occurs, so I'm led to assume a driver or something is causing the issue.
DVD drive on my test bed doesn't work, died ages ago, so that's not helpful, but I can extract dumps etc onto my server if anyone's able to help with this.

And if anyone can fix it - the beers and/or cookies are on me.
(can't upload anything right now as I'm away from all 3 computers)

A:BSOD - "Page Error in Non-Paged Area".

Originally Posted by pryogene


I love the Dev Preview so far. We were getting on so well. And then the (reimagine) blue screen of death shows up, with it's sad face. I thought I might have said something to upset it. "Shhh, it's okay winona, shhh" I said, stroking the screen comfortingly. And then she reboots. And BSOD's. Repeat X times till I also have a sad face on.

The error I'm getting is "Page Error in Non-Paged Area". This started after a BSOD relating to it falling idle for roughly 25 minutes (I've heard of other people getting this, but not my problem after). The system this is running on is an AMD Turion 64 X2 @ 2.1GHz, 3Gb DDR2 RAM, ATI HD3200, 250GB hdd. My standard issue test bed, since my Asus broke I've been using this in the mean time.

I've taken the HDD out and whacked it into my server (cause I'm just that cool), the file system is intact, ChkDsk doesn't find any integrity issues, and there's no bad sectors (allegedly). On top of this, the boot sector also seems in tact. I've done a test of both my memory modules, taking one out and testing the other on it's own - the error still occurs, so I'm led to assume a driver or something is causing the issue.
DVD drive on my test bed doesn't work, died ages ago, so that's not helpful, but I can extract dumps etc onto my server if anyone's able to help with this.

And if anyone can fix it - the beers and/or cookies are on me.
(can't upload anything right now as I'm away from al... Read more

8 more replies
Answer Match 80.64%

Every time i try to load an Http page i get "The connection to the server was reset while the page was loading"
Now i know my router in fine and my adapter is working because i can access Https (Secured sites), Online Games and Instant Messengers but everything else seems to be a no go now??

Ie is also the same but i am confused as to what could be causing it. I am currently on another computer run off the same router and this is obviously working fine.

I didnt change any settings simply left my computer on and working and when i returned No http pages would load. In the time i left the computer the only thing i can think of that happend were a few power surges but this may well be a concidence.

i have tried ip resets and loads of other solutions to similar problems i have seen but nothing has worked for me yet

Any help would be greatly appreciated

Thanks
Dan

A:[SOLVED] "The Connection Was Reset" Page Error??

Ok. First try uninstalling firefox completely which means going into your program files and deleting the mozilla folder etc. After this reinstall.

That or create a new profile in the profile manager and this should clear the problem.

You could also run firefox in safe mode to see if it is an extension you installed that could be the problem.

9 more replies
Answer Match 80.64%

Getting the cannot display DNS error message at any website I try to get to. It appears that my connection is open because I use a router and my laptop works fine. Other programs (p2p stuff, virus updater, etc) that require net access also will not work. Not sure if this is an issue that can be helped with HijackThis, but the problem seemed to start happening after I used Ad-Aware for the first time in a long time, so I'm thinking spyware may be involved. If not any advice as to what the prob may be would be great, thanks in advance for any help! System specs are

Internet Explorer 6
Win XP

here's hijackthis log:

Logfile of HijackThis v1.99.1
Scan saved at 9:36:18 PM, on 12/14/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Commo... Read more

A:"Page Cannot Be Displayed...Cannot Find Server or DNS Error"

Welcome to TSF.

Please print out or copy this page to Notepad. Make sure to work through the fixes in the exact order it is mentioned below. If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should 'not' have any open browsers when you are following the procedures below.

Please download Ewido Security Suite at http://www.ewido.net/en/download/.

1. Install Ewido Security Suite.
2. When installing, under 'Additional Options' uncheck:
* Install background guard
* Install scan via context menu
3. Launch Ewido, there should be an icon on your desktop, double click it.
4. The program will now open to the main screen.
5. When you run Ewido for the first time, you will get a warning 'Database could not be found!'. Click OK. We will fix this in a moment.
6. You will need to update Ewido to the latest definition files.
* On the left hand side of the main screen click update.
* Then click on Start Update.
7. The update will start and a progress bar will show the updates being installed. The status bar at the bottom will display 'Update successful'.
8. Exit Ewido. DO NOT scan yet.

If you are having problems with the updater, you can go to http://www.ewido.net/en/download/updates/ to update manually.

Download CleanUp! http://cleanup.stevengould.org/ (Alternate Link if main link don't work - http://www.greyknight17.com/spy/CleanUp.exe ) and install it. Don't run it yet.

Restart your computer and boot into ... Read more

7 more replies
Answer Match 80.64%

Hello,,,,,
If this is not the correct forum for this description please let me know.

Using a Windows98SE operating system and Internet Explorer 6.0.2800.1106.

When I look at a TECHGUYS FORUM Web Page that displays questions/problems/solutions "Error on Page" is displayed in the lower left corner of the IE Window. The following is always the detail information no matter what forum report page is reviewed:
Line: 3
Char: 1619
Error: Object Required
Code: 0
URL: http://forums.techguy.org/windows-95-98-me/778966-solved-driver-
updates.html
If I use another computer that sits in the same room with the same Operation System and Internet explorer this "Error on Page" does not occur.

I have searched all over for a solution and best I can tell this might be a missing JAVA Script.

If this is the case can you please let me know what script/object/file/application etc. is missing or requires an update and/or download?

Thanks for your time help and advice!!!

Jerry
 

A:Solved: Internet Explorer: "Error on page"

13 more replies
Answer Match 80.64%

Okay, I'll try to explain this as best I can as I'm posting this for my husband. He is on a business trip in SE Asia (India, Korea, Taiwan) and while in India he picked up a virus. It's been cleared but he continues to have this problem with IE7...
He's able to open it and do a little reading or get his email, but after about 5 minutes he only gets the "Page Cannot Be Displayed" error and is unable to open any new tabs or windows, no links work, etc. (he then has to reboot to get it back). He's cleared files (history, cookies, temp files, etc.) using Internet Options and Explore, disabled add-ons, enabled & disabled pop-ups, etc., all to no avail. He's even tried using it in safe mode but the same problems occur. He was able to download HJT which got rid of hggff.dll (Vundo?). He said he would try to email the hjt.log file tomorrow morning (tonight EST) and I will post it, if this will help to decipher the problem. Meanwhile, if anyone has a suggestion of what else to try I (and he) would greatly appreciate it!
He is using a Dell D610 laptop running XP-Pro on a VPN (required to get his emails from work).
 

More replies
Answer Match 80.64%

It's getting worse. It's happening more frequently than before. Please tell me how to fix this. Thanks.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8, 64 bit
Processor: AMD A6-4400M APU with Radeon(tm) HD Graphics, AMD64 Family 21 Model 16 Stepping 1
Processor Count: 2
RAM: 3554 Mb
Graphics Card: AMD Radeon HD 7520G, 512 Mb
Hard Drives: C: Total - 688299 MB, Free - 606218 MB; D: Total - 25964 MB, Free - 3045 MB;
Motherboard: Hewlett-Packard, 1849
Antivirus: Lavasoft Ad-Aware, Disabled
 

A:I keep getting a "Page in Non-Paged Area" error message.

9 more replies
Answer Match 80.64%

I am operating IE6 on Windows XP with SP 2. There are certain websites that I used to frequent, that do not load up anymore. I am sent to a webpage titled "Error Page Assistant". The webpage has "DNS Error Page" listed at the top, and below is some generic version of a search engine. The following are two websites that give me this error: www.compusa.com & www.enquirer.com.

I have tried using Ad-Aware & Nortons, hoping that it might be a virus/spyware. Please let me know if there is anything else I can do. Thanks!
 

A:IE6 will not load certain websites: "Error Page Assistant"

6 more replies
Answer Match 80.64%

I've never seen this error before. I've got a user that receives this error when printing to an HP5si onto A4 paper. They are located in the UK.

I received a copy of the file, margins are no less than .75 and no more than 1.0; paper size shows A4, I do not get the message when connected to an HP5m.

Any suggestions? Sorry that's all the info I'm getting from the user, even after requesting it.
 

A:Excel 97: "Margins do not fit page size" error

6 more replies
Answer Match 80.64%

Hello,

I need help with this Diskette issue please. "Diskette Drive 0 Seek Failure"
I've had this problem a few times in a couple of years and I have been able to fix the error by pressing F2 and going to the SETUP. And I've done this with no issues. But this time I thought I fixed it but now I get this new error: "A disk read error occurred Press Ctrl+Alt+Del to restart". After I press Ctrl+Alt+Del it takes me back to the same error massage "A disk read error occurred Press Ctrl+Alt+Del to restart". Need help please. This is a Dell Desktop, Windows XP.
Thank you.

Sue
 

A:"Diskette Drive 0 Seek Failure" Error Then "A disk read error occurred Press Ctrl..."

9 more replies
Answer Match 80.64%

I cannot open User Accounts in Control Panel, I keep getting ...

Microsoft (R) HTML Application host has encountered a problem and needs to close.

Anyone with a fix? . My appreciations in advance!
 

A:"User Accounts" in Control panel wont Open-Error is "Html application Host Error"

Do you have a recovery restore install disc or partition?
You can try doing a repair or system file check...
Scan For Missing/Corrupt System Files...

Windows XP comes with a wonderful tool called System File Checker (SFC)
Itscans and verifies the versions of all protected system files after you restart your computer...
To Do This:
Click Start menu, and then click the Run icon.
In the small box that Opens, type the three letters: cmd then click the OK button.
In the command prompt window that just opened (a black background and white text), type the following command:
SFC /scannow
And then click OK
You must be logged on as a member of the Administrators group to run SFC..
You will need your Windows XP CD during this procedure if SFC needs to get an original file. Please remember that Windows XP can have multiple instances of a .DLL file and remember which version is for which program.
Notes....
I have been asked if it is possible to have a "progress meter" show when SFC runs... This is the registry hack you need. PLEASE do not go messing with your registry if you do NOT know what you are doing!
System Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
Value Name: SFCShowProgress
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = disabled, 1 = enabled)
 

1 more replies
Answer Match 79.8%

I am runing my Laptop with wireless Internet, it see I can seval " excellent Connection " but when I try to open my internet exployer it's says " Page Can;t be Disply " I check my setting looks ok, Help! anybody Please help!..
 

A:Browser Error " Page Can't be Disply "

6 more replies
Answer Match 79.8%

So here's the problem. I share my computer with my mother, who is going back to school. She wants to be able to log on to the www.tri-c.edu website, but when she clicks on the "my tri-c space" link at the top, or types in my.tri-c.edu it says "error on page" and displays a blank page.

Here's the strange thing...

This only happens when trying to access the page with her user account. When I log in with my user account and click on the link, or type in my.tri-c.edu, everything works fine.

This is all very mysterious. It all started happening after I removed a malware infection. The details of everything I did are in this thread on spywareinfo.com.

I have tried deleting her user account and re-creating it, but it didn't help.

Can someone please help me? (I hope this is in the right forum. It deals with internet explorer, but also XP user accounts, so I'm not sure).

More replies
Answer Match 79.8%

I have uploaded several PDF files to my website, but one is being stubborn.. I have several XLS files that I printed to PDF through CutePDF Writer and the PDF writer in MS Word2007. I got this message on a couple of them, but I wasn't able to get one of the files to display.

Error I get: "an error exists on this page. Acrobat may not display the page correctly..contact the person who created the file..."

I changed the file name and "reprinted" and uploaded again, but I can't get this one to work for some reason.

I'm using WebEasy web builder, but I don't think this is the problem since I was able to correct other PDF files.

Thanks!

Peachy
 

A:Adobe PDF "an error exists on this page"

Are you able to identify which particular PDF documents were created with Word, and which were created with CutePDF?
Maybe those that have errors were all created with the same application? I suspect it will be CutePDF because I've always used Word to create my PDF documents and they've all opened without any errors in Adobe Reader.
 

2 more replies
Answer Match 79.8%

So here's the problem. I share my computer with my mother, who is going back to school. She wants to be able to log on to the www.tri-c.edu website, but when she clicks on the "my tri-c space" link at the top, or types in my.tri-c.edu it says "error on page" and displays a blank page.

Here's the strange thing...

This only happens when trying to access the page with her user account. When I log in with my user account and click on the link, or type in my.tri-c.edu, everything works fine.

This is all very mysterious. It all started happening after I removed a malware infection. The details of everything I did are in this thread on spywareinfo.com.

I have tried deleting her user account and re-creating it, but it didn't help.

Can someone please help me? (I hope this is in the right forum. It deals with internet explorer, but also XP user accounts, so I'm not sure).
 

A:"Error on page" for one user account, but not another

Make sure that under your mother's login, Internet explorer has Java, JavaScript, and cookies all turned "on".

Here's some instructions on the tri-c.edu website:
https://lum-app.tri-c.edu/cp/misc/java_cook.html

If this fails, then I would unistall and reinstall Java.
 

1 more replies
Answer Match 79.8%

This error massage has suddenly started to constantly appear in windows internet explorer on the MSN homepage, I am now on Windows 10.

More replies
Answer Match 79.8%

Platform: Windows 2000 SP4 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)
PC: Fujitsu Siemens Scenic

I can log onto Internet no probs, browse away for approx one minute, then get "The page cannot be displayed" error, all/any webpage. I'm pretty sure malware is involved. No new installs or anything. This post is from a different PC, different location.

I have tried IE Repair, reinstalling IE, virus scans, "READ & RUN ME FIRST", etc. I could really do with help interpeting my HijackThis log. Any other suggs most welcome.

I have had problems of late with Backdoor spyware:
"Backdoor.Win32.Rbot.gen",
"Backdoor.Win32.sdbot.ZG", &
"Backdoor.Win32.sdbot.gen!A".

I have run HijackThis (v1.99.1), read and followed all preliminaries. Here is my log. Please help if you can. Thank you...

ps I have also posted to Daniweb, I will update here/there with progress

More replies
Answer Match 79.8%

Finaly here is the help for those having problems sending mail using yahoo:

"Error on Page" in Yahoo Mail

Check it out its great!

ngwasuma

A:"Error on Page" in Yahoo Mail

This problem has since been corrected by Yahoo


_______________________________
Own a domain name today - great hosting

1 more replies
Answer Match 79.8%

Firewall is disabled. What setting do I change to prevent this error?
 

More replies
Answer Match 79.8%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 78.96%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Answer Match 78.54%

Hi;
Had a sudden inability to go much further than a third or forth-level download on ANY given webpage and then PC would seize-up, requiring "cont+alt+del" in order to get freed-up. Thought perhaps I picked-up a bug of some sort during a recent google search, and went immediately to Panda and Trendmicro to perform both virus as well as malware scans. While the Panda scan was loading-up, I received the following error message....

... " DoPatch....dll reports error....Error "C:\WINNT\patch.utp"....unreadable or not a patch file..."

Was able to complete both scans. Nothing found other than tracking cookies.

I then did a file serch for the above and located it. It was installed TODAY apparently, and not by me, within minutes of the problem starting.

I'm guessing someone/thing slipped this patch into my WINNT file or modified it while I was doing the google search, so I have included a HJT scan below.

Hope this all makes sense and ties-out to something. Any help would be genuinely appreciated-
thanks
Webz

__________________HIJACK SCAN BELOW__________________________
Logfile of HijackThis v1.99.1
Scan saved at 12:42:23 PM, on 5/11/2005
Platform: Windows 2000 SP4 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\system32\LEXBCES.EXE
C:\WINNT\syste... Read more

A:"DoPatch" error message - "dll reports error" causing pc to seize-up (HJT attached)

Bump for HJT expert
 

1 more replies
Answer Match 78.54%

im not sure why windows vista is doing this error how can i fix it The application error "0x7c919af2"referenced memory ae"0x00000010" the memory could not be written'

there shouldnt be any reason it has happening on several applications from games to ie fire fox has done it as well if u can help i would be ever so gratefull
 

A:vista The application error "0x7c919af2"referenced memory ae"0x00000010" error

Hi, let us have some Pc specifications.
Check and post
TSG System Information Utility - found here.
http://static.techguy.org/download/SysInfo.exe
======
Download Security Check by screen317 from.
http://screen317.spywareinfoforum.org/
Or
http://www.bleepingcomputer.com/download/securitycheck/

Save it to your Desktop.
Double click the install icon.
If using Vista or Win 7 - right click the icon - run as Administrator
A command Prompt window will open.
Let it scan the Pc - press any key when asked.
It should now open in Notepad.
Copy and Paste the result of the scan in the reply box below.

The saved log will be called checkup.txt.
 

3 more replies
Answer Match 78.54%

Hi
I use Fotopic, just upgraded PC and had Windows 7 installed, latest Java installed
I cannot open properties or commentary boxes, nor can I upload images to Fotopic
I get an "Error on page" message
Double clicking on that, the message is

No such interface supported
upload.html Line:94
Code:0 Char:16
URI:Fotopic.Net :: Sign In[gallery number]/upload.html

Why has this occurred and what can I do to rectify it?
Thanks
Cliff

A:"Error on page" using Fotopic

If you just did the upgrade and it was not a clean install.

Install again using a clean install.
Do not give your key, until you are fully installed and happy. When asked for your key uncheck the box allowing automatic activation.

6 more replies
Answer Match 78.54%

HI,
Just noticed on my website, when going to home page, showing on the "Status bar" is an Error on Page, details as follows:

Line - 104
Char - 1
Error - Object expected
Code - 0
URL: http://homepage.ntlworld.com/m.snape/FRAMESET1.htm

I have noticed that on this line (on my page ) is:
=<map name="Map">

I know I can just ignore this error, but was just wondering if anyone could advise, thanks...
 

More replies
Answer Match 78.54%

Since installing my SBC Global DSL on my home computer, I cannot access certain support or upgrade pages in www.microsoft.com from Internet Explorer. And, I cannot get into www.symantec.com at all. I get Page cannot be displyed. Funny thing is, my AOL account can access all the above mentioned sites. Any thoughts here? By the way, SBC Help had my try to run regsvr32 commands for some different dll's but to no avail.

More replies
Answer Match 78.54%

Hi i am in need of urgent assistance with Internet Explorer. When i went on to my lap top i it told me that i had spyware and needed a program in order to detect and remove it. I didn't have a spyware program on my lap top at the time so i did a search in Google for "spyware remover". When i did this i went to this link:
http://www.spywareguide.com/txt_onlinescan.html
That site has an online spyware scan that's supposed to detect and remove spyware. I did this scan on my lap top and it told me that i needed to delete certain files that contained spyware. So, naturally i agreed for the program off that site to do it for me. However, ever since i did this every website i go to on Internet Explorer comes up with the message "Page cannot be displayed"(i am currently using another machine). When i open my web browser, at the bottom it has a link to the file SHDOCLC.DLL so i have a feeling that this file is corrupt which is causing webpages to not come up. If ANYONE can help me with this problem it would be much appreciated. I hope someone out there has read all that and can help me! Thanks heaps.
- mickol25

A:"Page cannot be displayed" Error

Hi mickol25,

had a quick google search about the file you refer to here, have a read, I don't think however that is your only problem. Have you got HijackThis? If not, download from the link I'll leave at the bottom and save it into it's own directory on your C:\ (hard disk) drive because you'll need to save some log files on it. Read the help file with it and run a scan and post your log back on here where someone will evaluate it and give you advice. After you have run the scan do NOT 'fix' anything, just save the log and post it. You will have to run another later and fix the problems.
HijackThis
Good luck

1 more replies
Answer Match 78.54%

when i log into hotmail i cant open or delete messages and it says error on page in lower left corner i tried deleteing temp files and everything but still nother i fear it might be spyware or something so i attached my hijackthis log and hopefull someone can tell me wat to delete to fix it
 

A:hotmail "error on page" plz help!!!

Please do not create multiple threads for the same problem! Read >>Posting help read first<< if you feel you are not getting help.

Continue here: http://forums.techguy.org/malware-removal-hijackthis-logs/736906-hijackthis-log-help.html
 

1 more replies
Answer Match 78.54%

I have a PC running Vista SP1 and IE7. Whenever I try to go to some sites that use streaming video, I get a "Page Cannot Be Displayed" error. I can get the videos to play on Firefox, but i would like to be able to use IE7. As of now, I am simply saving the target and watching the video after it downloads. The weird thing is that the videos used to play just fine, then one day they stopped and the same sites I used to watch the videos on gave me the error instead. Anyone seen anything like this?

A:"Page Cannot Be Displayed" error on IE7

try going to tool - internet options - advance tab and try reseting everything to default by click on reset advance settings.

1 more replies
Answer Match 78.54%

Just recently my computer will not let me log into Yahoo, Hotmail or any other sites that require my ID and password. When I go to the site and click the "log-in" page it automatically displays "Cannot Display Page" DNS Error. I have tried for a week to fix this and are at a loss. Any help will be appreciated.
 

A:"Cannot Display Page" DNS Error XP

7 more replies
Answer Match 78.54%

I am trying to help my neighbor get her Internet working correctly. Here is the problem: She is connected to Internet. Opens a home page fine. When going to register or sign in to a site previously registered on or ordering anything (obvious secure pages), she gets the "This Page Cannot Be Displayed" error message. She is with Cox Internet. We called their tech support. Disabled all anti-virus and spyware. Still no success. They suggested something about reinstalling IE. (That's a little scary to me.) Her Windows updates are current. Any suggestions? You guys are always soooo helpful! Thanks in advance.

JosieM
 

A:"This Page Cannot Be Displayed" Error

6 more replies
Answer Match 78.54%

I have been experiencing the "page can't be displayed" when clicking on some links in IE 11 or sometimes I get the error message within a page. This happens only in IE, not in Firefox. I received an email newsletter and when I move my mouse over the link, at the bottom of the page it shows the link as:

http://goo.gl/5P4EZo

If I set IE as my default browser and click the link it fails to expand and bring up the web page. In the web address bar, it shows the above link. However, if I set Firefox as my default browser and I click on the link, it goes through and brings up the page and has the follow address:

http://www.scottevest.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=sev&Category_Code=sev_collection_sale&utm_campaign=kim_komando_0 7_25_14

I suspect the link is a shorted substitute link like "tiny url" or similar using Google. What is preventing IE from going to the web site like Firefox does?

A:Error in IE 11 - "This page can't be displayed"

Hi,
The shortened link opened this page without delay ?
SALE ITEMS: SCOTTEVEST

Code:
http://www.scottevest.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=sev&Category_Code=sev_collection_sale&utm_campaign=kim_komando_07_25_14
I would suggest using Alt+TD or Gear symbol/ Safety/ Delete browser history,
Uncheck the top box and click on Delete,
Close ie and re-open and test,
Cheers.

7 more replies
Answer Match 78.54%

I can log onto the net via AOL. For some of the websites I get the error message "the page cannot be displayed". The bottom of the page is "server or DNS error". This started about 2 days ago. I feel "something" has hijacked my brouser settings and I can't find it. Spybot and Adaware don't touch it. My Hijack this log is as follows:
Logfile of HijackThis v1.98.2
Scan saved at 10:58:41 AM, on 11/9/2004
Platform: Windows ME (Win9x 4.90.3000)
MSIE: Internet Explorer v5.50 (5.50.4134.0100)

Running processes:
C:\WINDOWS\SYSTEM\KERNEL32.DLL
C:\WINDOWS\SYSTEM\MSGSRV32.EXE
C:\WINDOWS\SYSTEM\mmtask.tsk
C:\WINDOWS\SYSTEM\MPREXE.EXE
C:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\CCEVTMGR.EXE
C:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\SYMTRAY.EXE
C:\PROGRAM FILES\COMMON FILES\AOL\ACS\ACSD.EXE
C:\PROGRAM FILES\NORTON SYSTEMWORKS\NORTON UTILITIES\NPROTECT.EXE
C:\WINDOWS\SYSTEM\SSDPSRV.EXE
C:\PROGRAM FILES\NORTON SYSTEMWORKS\NORTON CLEANSWEEP\CSINJECT.EXE
C:\WINDOWS\EXPLORER.EXE
C:\WINDOWS\SYSTEM\PDESK.EXE
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\SYSTEM\RESTORE\STMGR.EXE
C:\WINDOWS\TASKMON.EXE
C:\WINDOWS\SYSTEM\SYSTRAY.EXE
C:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\CCAPP.EXE
C:\PROGRAM FILES\REAL\REALPLAYER\REALPLAY.EXE
C:\WINDOWS\SYSTEM\SPOOL32.EXE
C:\PROGRAM FILES\WINZIP\WZQKPICK.EXE
C:\WINDOWS\SYSTEM\RNAAPP.EXE
C:\WINDOWS\SYSTEM\TAPISRV.EXE
C:\WINDOWS\SYSTEM\PSTORES.EXE
C:\WINDOWS\SYSTEM\DDHELP.EXE
C:\PROGRAM FILES\AMERICA ONLINE 9.0\WAOL.EXE
C:\... Read more

More replies
Answer Match 78.54%

Ever since I started using IE, I get Error on page. Why does this happen. It happens on every computer! The computers are up to date and don' see a reason why it should say that.

More replies
Answer Match 78.54%

I am having problems with certain websites, when I enter my username and passwords I get "Page not displayed or unavailable" has anyone seen this problem before? Please Help.

Thanks
 

A:"Page not displayed error"

16 more replies
Answer Match 78.54%

I first posted this to Microsoft Newsgroup for IE 6.0 but have received NO
solution. Then I placed it in the XP newsgroup in hopes of finding additional information.....NO LUCK there, either. If anyone has ANY SUGGESTIONS, please advise.
I've checked all the settings (dial-up, Internet Properties, modem) I can think of to see if there is something set incorrectly...now I'm not sure WHAT is supposed to be the proper settings but NO page will load regardless of the site. I emptied temp files, cookies,did system restore, and the connection IS
established. Also, used other sites besides MSN for the home page
and receive the same message. Uninstalled/reinstalled dial-up connection....still "page cannot be displayed" error appears. At a total loss what to try next. Any/all help or suggestions would be appreciated!

A:IE "page cannot be displayed" error in XP

Try:
Tools > Internet Options > Programs > Reset Web Settings

If that doesn't fix it we need more information. Try this:

Start > Run > type "cmd" > Ok

type "nslookup www.google.com" Does this return an IP address for the site?

type "ping 129.21.3.3" Does it say the request timed out?

~GICodeWarrior

2 more replies
Answer Match 77.7%

Firt of all, excuse for my english. I can read, but I cannot write. I am live in Brazil.

My computer is showing a blue screen when I play Fifa Soccer 2005 and other games (I had install the same games in other computer, and works well). Sometimes the information of blue screen change. Another day it is showing:

Driver Irql not less or equal
[....]
smwdm.sys
[....]

I update my sound drive and the problem was resolved. But, in the next day, the blue screens appears again, but with another information:

Page fault in nonpaged area
[...]
nv4_disp.dll
[...]

I update my video drive and the problem don't resolved. I feel that after the update the blue screen appear more fast.

So, what I must to do?

Can anyone help me?

I make a search in "google" and the opinions are much variants.

My computer is:
AMD Sempron (TM) 2500+
Windows XP (SP 2)
GeForce FX 5200
512 Mb RAM (two combs)

Thanks,
Felipe Sabino
MSN: felipe.spurgeon@gmail.com


----

After write this text, I received another blue screen (playing Fifa 2005):

Stop: 0x0000008E (0x0000005, 0xBF824DE0, 0xB1DEEB18, 0x000000000)
[...]
Win32k.sys - Address BF824DE0 base at BF 800000. Data Stamp 43446a58.
[...]
 

A:'Page Fault in nonpaged Area" AND "Driver Irql not less or equal"

Maybe faulty memory

Hi,

The culprit is faulty memory. You can run memtest to stress the ram. If memtest reports the ram is faulty, ram is bad. However Memtest is not a perfect tool to test the memory as some faulty ram can pass memtest.

Suggestion
1. Check the temperature of the CPU and make sure that it is not overheat (ie temperature < 60C)
Make sure that the CPU fan works properly
2. Reseat the memory stick to another memory slot. Reseat video card as well.
3. Downclock the ram. Check to default setting if you video card is overclocked.
4. Clean the dust inside the computer case
5. Make sure that the ram is compatible to the motherboard
6. Check the bios setting about memory timing and make sure that it is on
For example : DIMM1 and DIMM2 do not have the same timing.
DIMM1: Corsair CMX512-3200C2 512 MB PC3200 DDR SDRAM (2.5-3-3-8 @ 200 MHz) (2.0-3-3-7 @ 166 MHz)
DIMM2: Corsair CMX512-3200C2 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz)
DIMM3: Corsair CMX512-3200C2 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz)
7. Make sure that your PSU have adequate power to drive all the hardware including USB devices
8. Run chkdsk /r at command prompt
9. Run 3DMark 2005 to test your video card
10. Upgrade BIOS

If it still crashes, diagnostic which memory stick is faulty
Take out one memory stick. If windows does not crash, the removed memory stick is faulty.
If you have only one memory stick, replace the ram
 

2 more replies
Answer Match 77.28%

I've been having some problems with my computer and I've always somehow managed to work my way around the issues spyware/malware etc. have created but lately it's been getting out of hand.. Some time ago I got a virus or something that made the entire tab under "Processes" dissapear. So I could not see process-names in the task-manager. I have re-installed XP but this problem persists. I have been using a different application to monitor and handle processes.

The problem now is the constant pop-ups generated from this fake anti-virus program calling itself "Anti Virus Pro 2007" or something.. It pops up with fake commercials, and even attach itself into other explorer-windows while I view other pages.

As popups and messageboxes keep popping up, I close them, but after a while windows will open a messagebox telling me "Buffer overrun detected in e:\Windows\system32\explorer.exe" (or \\windows\explorer.exe I don't remember really but you get the idea) and explorer.exe will be terminated, sometimes taking some internet explorer windows along with it, other times explorer.exe just starts up again and all my windows remain.

I used to have Norton but was forced to remove it as it was sucking up all my CPU. It rendered my computer useless, as I mainly use it for gaming.

I've also experienced having the connection between me and my modem broken while beeing on the internet, and I don't know if my computer actually is offline or if -I'm- just... Read more

A:Infected - "Win Anti Spyware" "Buffer overrun error" and a fake dialer or something++

Hello and welcome to TSF

Please download ComboFix

Note: It is important that it is saved directly to your desktop.

Close all browsers. Double click combofix.exe & follow the prompts.
When finished, it will produce a log for you. Post that log in your next reply.
Note: Do not mouseclick combofix's window while it's running. That may cause it to stall.

You are using an older version of HijackThis. Please do the following to download and install the latest version of HijackThis v2.0.2:

CLICK HERE to download the HijackThis Installer:Save HJTInstall.exe to your desktop.
Double-click on HJTInstall.exe to run the program.
By default it will install to C:\Program Files\Trend Micro\HijackThis.
Accept the license agreement by clicking the "I Accept" button.
Click on the "Do a system scan and save a log file" button. It will scan and then ask you to save the log.
Click "Save log" to save the log file and then the log will open in Notepad.
Click on "Edit -> Select All" then click on "Edit -> Copy" to copy the entire contents of the log.
Come back here to this thread and paste the log in your next reply.
Do NOT have HijackThis fix anything yet! Most of what it finds will be harmless or even required.

You may delete the older version once you have successfully downloaded and installed the latest version of HijackThis v2.0.2.

Expected logs:

Combofix.txt
HijackThis log

19 more replies
Answer Match 77.28%

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

A:"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Answer Match 77.28%

Hope this query is in the right section -tried to use my LDS 1881 England Census CDs last night - but having problems with the Viewer.

I have V4 which up to now has worked perfectly - tried to re-install it
and I keep getting "Failed to extract file "Dll_ini" from binary table"
error message.

BUT no problems on my laptap which has the Viewer installed from the
same CD.

Have had a few problems with computer of late - it was in the workshop
3 weeks ago because of some corrupt Windows files - could that be the
problem?

Grateful for any advice, suggestions as to what to do!
 

More replies
Answer Match 76.86%

I am using a WD Proxkey DSC and while signing I am getting the following error"
"The Windows Cryptographic Service provider reported an error: The parameter is incorrect. Error Code: 2148073511"

More replies
Answer Match 76.86%

as described in the title when i boot my laptop: http://www.newegg.com/Product/Product.aspx?Item=N82E16834117780R
i get the "disk read error -> press cntrl alt del to restart" message. I then tried to access the backup partition through f10 only to run into this error "status : 0xc00000e9 Info : an unexpected I/O error has occurred" it seems that it cant communicate with my hard drive.

I read a few other forum posts but didnt see anyone have the 0xc00000e9 error also. Bios boot priorities are in order if that matters.

Is there a fix without having to replace the entire HD and buy a new vista installation(preinstalled w/ no disc in the box).

Im very reluctant to take it to a service center as i can very likely fix it myself (with the help of the friendly people here of course), only problem is im having a little trouble..finding.. my HD in this damn notebook.. heh, ill figure that part out. new to notebook repair.

Thanks in advance. Danny

edit: found the HD, doesnt look like it even uses a cable, just plugs right into what i assume is the mb. dont know if that helps just supplying what i can.
 

More replies
Answer Match 76.44%

I just resolved an issue I had with the wireless connectivity of my Acer notebook computer and now I am getting strange error messages. When I try (not every instance) to open device manager I will get the message "Failed to open empty document." From there I will occasionally get "Parser" messages that say "Value creation failed at line 843" or "line 422." I read what I could find about these messages and it points to MMC as the cause. How do I go about fixing this annoying problem if anyone knows?
 

More replies
Answer Match 76.44%

I only get the BSOD when playing games, not any specific game, but any, sometime i can go a whole week of playing games and have no BSOD at all, and somedays 5 minutes after a game is running it will BSOD everytime, all day long. When I try to Run any game like GW2 Or Inquisition my pc turns into Bluescreen with an error CRITICAL_PROCESS_DIED or KERNEL_DATA_INPAGE_ERROR ..I've already Updated all my drivers and reinstalled all my games, also run chkdsk /f and memtest with no problems.


This is the screen:

Also this is my dump config:
(note that i have windows 8.1, not 7)

Still it doesn't create any File or Folder and when the BSOD happens the blue screen say that its collecting info but it doesn't get off 0% .
It's the same with the critical process died it just goes to the blue screen saying its collecting info but it also doesn't get off 0%.

I'm completely baffled with what to do as the blue screen view hasn't picked up anything and i cant find the dump files.
 

A:"Critical Process Died" & "Kernel Data Inpage Error"

Hi BTW, welcome to the TSG Forums....

You may find this from the MS Community helpful. If Greek is easier to understand than this article then come back to this Forum and someone will help you.

http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/windows-81-bsod-kernel-data-inpage-error-and/b67ae41a-9228-4462-9c53-d1f5d115f784

T.
 

1 more replies
Answer Match 76.44%

hi can u help me about instruction at "0x7c9100c8" referenced memory at "0x666f7260" it always appear every 4 hours and then my computer start counting for shutdown or restart. help please . . .

More replies
Answer Match 76.44%

Windows XP SP2

Ok, I tried some things in other threads but to no avail. But some threads are having my same problems. First this about:blank crap is always my home page even if I change it, as well as these porn links in my favorites list. I've run scans with 5 different virus/ adware scan programs but it doesn't fix it. However, it got even worse-- I can no longer open things like My Computer, My Documents or even Control Panel to try and uninstall software. When I try to open any folder my computer freezes temp. and I get the following message: "DrWatson Postmortem Debugger has encountered a problem and needs to close. We are sorry for the inconvenience."

PLEASE Somebody help me. I have hijack this, if that helps. AHHHHHHHHHHH!!!!!!
 

A:Solved: I can't open anything "Dr. wtsn error" & I can't remove "blank: about" adware.

14 more replies
Answer Match 76.44%

Hi Everyone,

i am using CRichEditCtrl::GetLine() function to read the text from a dialog.
If my text contains any space character then it is throwing improper argument error and the application getting closed in vista only.....
What is the actual problem ????? why it is happening with vista only...?

Please suggest

More replies
Answer Match 76.44%

I have a big problem here,
I have used my hard disk for 9month,
Yesterday when I watched movie on the half way,
My hard disk suddenly disfuntion,
And I thought my laptop problem due to always lagging so I restart my computer.
But after that I can't read my hard disk (WD)in my computer.
It can read in computer management there.

Ways I try:
1)I try to uninstall and reinstalled again,BUT it doesn't work.
2)I try to unchecked the hide folder and device at view.
3)I try to update the software BUT it still disfunction.
4)I try to use disk management and initialized it BUT there appeared CANNOT INITIALIZED Due to I/O device error.

Any solution for me ?

A:Hard Disk can't read in "my computer ", "initialized",I/O device error

The most usual cause is that the Hard Drive is beginning to fail. Back up your stuff. Go to the website of the manufacturer and test the drive.

8 more replies
Answer Match 76.44%

Anyone tried deleting a registry key in Windows 7?  Got "access denied" or "Error while deleting key"?
The usual response is, "You need to run regedit as an administrator".  but I *AM* logged in as Administrator, and running regedit as administrator, trying to assign administrator full permissions on that registry key in order to delete it!!  
Am I mistaken, or isn't Administrator supposed to be able to administer and control all the settings on the computer, in order to set it up for the "Average Joe" user?
So, under the permissions menu of that key, go to advanced, change the owner from System to Administrator, and try again.  It's no longer saying "access denied", but "Cannot delete xxxxxx. Error while deleting key".

The scenario: Basically, the wireless has stopped working on a laptop. The device does not show up in Device Manager, but is in the registry, so the normal procedure is to delete the registry entry for the device in HKLM/System/CurrentControlSet (and /ControlSet001) /Enum/PCI    ,then attach the device or restart the computer, it finds the "new" hardware and reinstalls it. Easy!...

Not with permission restrictions on the administrator account it's not!  So I need to give myself permission, to give myself permission, to do a simple task like delete a single registry key!  Why, Microsoft, why???!!!  Please just make the Administrator accoun... Read more

More replies
Answer Match 76.02%

Windows XP
SP 2

I have two main problems and from some of the other threads I've viewed they might be related. 1) Whenever I try to open "My Computer" or "Control Panel", etc. I get this "DrWatson Postmortem Debugger has encountered a problem and needs to close. We are sorry for the inconvenience." Then my system freezez up for a while until I CTRL ALT DEL and end "drwtsn" manually. 2) I think I have some adware. My internet hope page keeps reverting to "about:blank" regardless of what I change it to. I am also getting some porn links in my "favorites" list and if I delete them they just go back. I've run scans with Norton, AdAware SE, SpyBot, and Nod32 and I also have SpywareBlaster running. I don't know what to do! Please help!

Here's my hijack this scan:

Logfile of HijackThis v1.99.1
Scan saved at 6:33:20 PM, on 3/14/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton AntiVirus\SAVScan.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\Common File... Read more

More replies
Answer Match 76.02%

To anyone that can help me out:

I purchased a windows anytime upgrade key and upgraded my system from windows 7 home premiuim to windows 7 ultimate now when my windows tries to update I get this: (See image titled "message")



To bring you up to speed as to what I've done so far:
I ran sfc\scannow and no errors were found
I downloaded the hotfixes and apllied them and still could not update
I tried to do a system restore to the point before I upgraded, but I could not perform one because all of my previous attempts to update windows automatically creates a system restore and all the restore points were within a 24 hour period
I installed a system update readiness tool as per "windows help and support" dialogue box

To see the updates that did not install, refer to the image titled "update"

Really, I feel like I've done my homework and I've exhausted my efforts as to how to fix this problem. I'm currently going to school for computers and so I really like to apply what I learn in real world situations, but this one has got me stumped!

I'm also attaching my checksur.log I don't understand it now and it looks like a foreign language to me, but as I progress through my information systems degree I hope one day I can become a techsupport forum partner.

Any help would be greatly appreciated!!

Thanks in advance,

Techstudent36

HERE IS MY CHECKSUR.LOG


=================================
Checking System Update Read... Read more

A:windows update error code "WindowsUpdate_80073712" "WindowsUpdate_dt000"

Hi have you tried running a start up repair An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

7 more replies
Answer Match 76.02%

Windows XP
SP 2

I have two main problems and from some of the other threads I've viewed they might be related. 1) Whenever I try to open "My Computer" or "Control Panel", etc. I get this "DrWatson Postmortem Debugger has encountered a problem and needs to close. We are sorry for the inconvenience." Then my system freezez up for a while until I CTRL ALT DEL and end "drwtsn" manually. 2) I think I have some adware. My internet hope page keeps reverting to "blank: about" regardless of what I change it to. I am also getting some porn links in my "favorites" list and if I delete them they just go back. I've run scans with Norton, AdAware SE, SpyBot, and Nod32 and I also have SpywareBlaster running. I don't know what to do! Please help!

Here's my hijack this scan:

Logfile of HijackThis v1.99.1
Scan saved at 6:33:20 PM, on 3/14/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton AntiVirus\SAVScan.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\Common Fil... Read more

More replies
Answer Match 76.02%

Windows XP
SP 2

I have two main problems and from some of the other threads I've viewed they might be related. 1) Whenever I try to open "My Computer" or "Control Panel", etc. I get this "DrWatson Postmortem Debugger has encountered a problem and needs to close. We are sorry for the inconvenience." Then my system freezez up for a while until I CTRL ALT DEL and end "drwtsn" manually. 2) I think I have some adware. My internet hope page keeps reverting to "about:blank" regardless of what I change it to. I am also getting some porn links in my "favorites" list and if I delete them they just go back. I've run scans with Norton, AdAware SE, SpyBot, and Nod32 and I also have SpywareBlaster running. I don't know what to do! Please help!

Here's my hijack this scan:

Logfile of HijackThis v1.99.1
Scan saved at 6:33:20 PM, on 3/14/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton AntiVirus\SAVScan.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\Common File... Read more

More replies
Answer Match 76.02%

Wanted to resurrect an older thread, but its closed :
http://forums.techguy.org/windows-xp/652638-error-moving-file-folder-directory.html

Please read completely before responding.
I am a 30 year IT pro, most of it as a programmer. I am the geek in charge of a tech non profit org in Hawaii. www.HawaiianHope.org
so yea.. i have at least half a clue.

Here is the deal.
In doing drive copies, data recoveries, etc... when we are moving a mass amount of data from one drive to another we run into this problem a lot.
"Error moving file or folder" -- "directory is not empty"
If you restart the move, it will continue on and keep going, restart enough times and eventually it will move all directories.

I think its a programming issue with windows and wonder if anyone has a work around ?

I have a suspicion that the copy process is getting out of sequence. That it is trying to move a folder before it actually emptied it. Possibilities are :
1) windows forgot its place in moving through and navigating numerous sub directories and it is having a problem with “recursive calls.”
2) Computers with hyper threading or dual core processors are spawning the movement of files across multiple processes, and some are getting ahead of the other.
3) It did actually move the file, but the cache or something in memory has not updated, or the full data write has not completed yet before it tried to move the directory. (delayed write)
Yes, you can copy and then delete the old... Read more

A:"Error moving file or folder" -- "directory is not empty"

This is a known issue. It is by design.

As you may know, moving is in its essence an unsafe process. It would be better to use the actual sequence of copy and then delete.
 

3 more replies
Answer Match 76.02%

Hi, just as the question title says, I am having a RunDLL error with the windows dll "streamci.dll".

I am getting this error while trying to install my Audio Drivers on my newly set up XP OS.

During the installation of XP, a couple of files were not copied properly.
because the CD was scratched up pretty badly, but I had no other copy of the CD, I had to just skip and hope windows installed, and was usable...

Are there any tools, that can scan your computer for missing windows DLL's and re-install them?
I have already tried downloading the file streamci.dll from the internet and installing it with

Code:
regsvr32 streamci.dll
in the command line, but I get the following error:
RegSvr32

"Streamci.dll was loaded, but the DllRegisterServer entry point was not found.
This file can not be registered."Click to expand...

Would downloading and re-installing SP2 from microsoft, possibly fix this problem?

Any Ideas?
 

A:RUNDLL ~ "Error Loading Streamci" ~ "The Specified module could not be found"

What version of XP Pro did you install with that CD?

XP Pro original

XP Pro SP1

XP Pro SP2

Have you downloaded and installed the SP3 upgrade?

-----------------------------------------------------------------
 

1 more replies
Answer Match 76.02%

Okay, I have an ATI Radeon 8500 on my Windows XP system, and one day, after my dad had used the computer, the 3D video driver stoppeed working. He can't recall doing anything. So it goes. I think "whatever", downloaded the latest Catalyst drivers, and try to install it, only to get the message "INF Error, Video Driver Not Found" and then "Try to set up your adapter with a standard VGA driver before running setup". I tried googling for info (apparently it's a common-ish issue), but I never found anything that worked. I tried uninstalling anything ATI and then installing, to no avail. I tried uninstalling the error-listed VGA adapter from the Device Manager and then running install which didn't work. Rebooting after that also didn't work (it popped up with "New hardware found" after the reboot, but it couldn't find the proper drivers).

After an unedifying series of adventures I got to http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=45&kind=1 which has several drivers for my mobo. I first downloaded (obviously) the VGA driver, and tried to run setup. Unfortunately, after preparing the install, an Error message pops up saying "The system cannot detect the device, please confirm that the device is configured properly and restart the setup program." I then tried downloading the AGP upgrade, installed it, but nothing changed. I also downloaded the BIOS update, since it mention... Read more

A:"INF Error", VGA Driver "Missing" Installing ATI Catalyst Drivers

the radeon is not integrated with your motherboard, and the onboard video has probably been disabled in the BIOS. to install the appropriate drivers for an ATI radeon 8500 card you need to download and install the drivers from ati's website. from there you can download the latest version of catalyst and install that.
 

13 more replies
Answer Match 76.02%

Hi,

I have a Toshiba r700-181 (PT310E) work laptop. It is running Windows 7 x64 Enterprise.

It has one 4GB stick of ram which is PC3 10600. Windows works fine with this.

I have obtained a 4GB stick of ram which is PC3 12800. With just this one in, Windows works fine.

However, if I have BOTH sticks put in, the BIOS recognises that there is 8GB installed, but Windows fails to boot.

It gets stuck at the "Starting Windows" screen. If I restart it asks me if I want to start windows normally or to run the Windows repair. If I try that I get the message: "Error: 0xc0000225. The boot selection failed because a required device is inaccessible."

I tried using a Windows 7 System Restore disc but that doesnt work...

If I try either of the sticks in the laptop one at a time, then Windows 7 boots up fine.

Is this just down to the laptop not being compatible with the mixture of speeds? I thought that if they were mixed it would just use the lower speed by default?

So confused

A:Laptop hangs at "Starting Windows" or getting "Error 0xC0000225"

Hello borito, Welcome to SevenForums!

Is this a laptop provided by a company you work for by any chance?

9 more replies
Answer Match 75.6%

Just wondering.....
Very frequently when I'm moving around online I will get the classic page reading "The page cannot be displayed" bla bla bla.....
Sometimes when searching for a site I know exists.
Sometimes after I have inputed some info on an online form & submit it.
Moving from one page to the next in both large & small web sites.
Not a big deal most of the time but it bugs me!
Does anybody out there have any ideas how to prevent this without lowering my protection level too far?
I'm currently using the following (w/ XP&SP2 using IE) & probably more....
AdSubtract
BHODemon
LavaSoft Ad-Aware
Spybot Search & Destroy
SpywareBlaster
SpyGuard
Winpatrol
McAfee
etc. etc.

On a side note this forum is amazing.
I have only posted a few times but reading what is going on is really helpfull.
THANKS in advance !

fmg

A:""The page cannot be displayed"" EEERRRGGG

That happens to me from time to time too. It's usually due to packet loss. Frozen pages too (where it begins to load and goes stagnant). Go back and try it again and it often works.

2 more replies
Answer Match 75.6%

There are some websites I go to (like Facebook for example), and when I go to certain places (such as to check my inbox or to confirm a friend request) nothing happens. The page just stays the same. I can hit the SEND button or the CONFIRM button or the ADD button 100 times and it doesnt do anything. Down on the bottom left of my internet window (when these incidents happen), there's a little white and yellow symbol and it says "Error on Page."
How do I make the "error on page" go away so that I can actually use some of these websites? I'm sure I have a lot of friends on Facebook who probably think I don't like them because I can't add them to my friends list. I can go to other computers and access things and do things just fine. It's only on my computer at work that the "error on page" appears and I have the problems.

Thanks for the help!
 

More replies
Answer Match 75.6%

Hello: I just received some windows updates as well as upgrading to Internet Explorer 7.
Note: I had to remove IE 7 the other day as I was having issues opening certain webpages.

Anyway, IE 7 seems to be navigating fine, other than the fact that when I click on my desktop icon to launch Internet Explorer it opens to a webpage that allows you to Customize Your Settings.

Although, I have www.google.com as my home page within Internet Options (General tab), Google does not open, but rather http://go.microsoft.com/fwlink/?LinkId=69157 opens then quickly converts to http://runonce.msn.com/runonce2.aspx which then opens the Customize Your Settings webpage.

I noticed that the default setting in Internet Options is displayed as http://go.microsoft.com/fwlink/?LinkId=69157 , so I tried to change that to www.google.com, but it reverts back to http://go.microsoft.com/fwlink/?LinkId=69157 .

Any suggestions?

Thanks, Ted569
 

A:Home page automatically opens to "Customize Your Settings" page

That is new with IE7.0. You should only have to run through the customization once though. Then click "Go To My Homepage." That should be all. Have you done that yet?
 

3 more replies
Answer Match 75.6%

I was at work today and I was in a hurry. I was on a web page which had a complicated link which I needed to remember so I could log onto that site at home. So instead of copying it, I put my USB in and clicked "Save page as" in my web browser thinking that it would save the web page and its link. But it didn't.

I have the web page in front of me but its the saved version and with a web address which is my USB directory (file:///G:/index.cfm.htm... I can navigate away from the page to links on it but I can't submit the online form I needed to submit.

I have tried a keyword search and phoning colleges to find out the site but I have had no success.

How do I find out the actual website of that saved web page

If anyone can help me solve this, I will be forever in your debt.
 

A:I saved a web page as "Save Page As", how do I get the original link to the website?

13 more replies
Answer Match 75.18%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Answer Match 75.18%

When surfing, and want to use a link, sometimes they work and sometimes they don't. It seems that the ones I need don't work. When they do not work I get an "error on page" msg in the lower left hand corner of the browser. I have asked several times on how to fix this but so far have not gotten any help that works. I use xp with intel motherboard, 256K ram 1.7 ghz. I just cannot believe that that many links don't work
Thanks
 

A:"error on page" error msgs

8 more replies
Answer Match 75.18%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Answer Match 75.18%

Hello,

1) At boot up, my computer will prompt with the "Windows - No Disk" error message. I try to cancel each time and usually by the the third cancel it finally goes away.

2) Internet Explorer 6 will freeze with the "hungapp" error message. I have to do a CTRL+ ALT+ DEL to close. This happens quite frequently and just about makes IE 6 unusable.

Any ideas as to what can be causing this? Below is my HijackThis log:
=====================================
Logfile of HijackThis v1.99.1
Scan saved at 22:11:43, on 1/20/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Belkin\Bluetooth Software\bin\btwdins.exe
C:\Program Files\Yahoo!\Antivirus\ISafe.exe
C:\WINDOWS\System32\snmp.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Belkin Bulldog Plus\upsd.exe
C:\Program Files\RealVNC\VNC4\WinVNC4.exe
C:\WINDOWS\system32\MsPMSPSv.exe
C:\Program Files\Yahoo!\Antivirus\VetMsg.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\Dit.exe
C:\Program Files\Lexmark X1100 Series\lxbkbmgr.exe
C:\Progr... Read more

A:Windows "No Disk" error at boot and "hungapp" error with IE 6

Click Run, type in msconfig, click OK, click Startup tab find dit.exe and uncheck it, click apply and reboot system. This worked for me with "No Disk" problem
 

1 more replies
Answer Match 74.76%

somehow i cannot send a page thru email now. i hit file, then "send as page", yahoo browser opens, i fill in address line. then hit send. when email comes thru, the "body" of it is blank! only a line, such as, Cholestoff.htm, is showing. no picture, words, nothing--just blank. have done reset thru internet options-advanced- reset--did not help. I did spend time with level 2 tech at ATT, who said, after much time/work, that his/ linked equipment showed that i was sending/receiving thru safe mode, but i'm not so sure. i have windows XP, internet explorer is my (?) browser. I also sent a page to g-mail, and it was also blank. what to try next? is one part not speaking to another, or something?
when i open the "sent" folder at yahoo, the line shows something was sent, but it too is blank. I tried system restore twice, but no help there. I did recently install Limewire, after not having it for 4 yrs. could there be conflict there? I use AVG free as anti-virus, but in all the mess i've taken it out, just to check if it was problem. thanks for any help. new greatgrandmother in Indiana

More replies
Answer Match 74.76%

So after my Period 4 class ended, I headed off to my spare class to work on some assignments on the Mac. My Flash Drive worked perfectly fine in, and before Period 4, then in Period 5 it wasn't working. On the Mac, during my Period 5, it said "Disk not accessible" with three options. I then tried four other computers using Windows 7 and it shown "G is not accessible - The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted."
At home I plugged in the Flash Drive (using Windows 7 HP 64bit) and the same error occurred.
So I tried the following things:
Downloading over (literally) eight useless programs that searched in the Flash Drive, and then asked for money; didn't find any files at all, or said "Disk is not Valid".
Went into cmd and typed chkdsk d: r/.
Renamed the portion letter.
Deleting, then installing the drivers (unplugging then plugging the Flash Drive in).
It seems the drive is corrupt, and I am not sure if it can be fixed at all, even by the world's professionals. Not too sure, but I am hoping this can be fixed, even if I have to send it to a store to use their software to recover my files and get the off that drive asap. I have all important graphic, and science work on there. I have work that needs to be handed in around one week from today.
I never kept backups as this drive has worked with my for over 4-5 years with absolutely no pro... Read more

A:Flash Drive USB error "Not Accessible" and "Needs to be Formatted"

Hi MattJoey,

Welcome to SevenForums.

Try partition recovery with the Partition Recovery Wizard in MiniTool Partition Wizard Home Edition 7.6 Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition.

or TestDisk (Windows version) TestDisk - CGSecurity

A trial using these for partition recovery that should help, here: Recover a flash drive turned RAW ? Partition Wizard and TestDisk.

( Read only the partition recovery portions in it. Do not attempt zero-write which I did to convert a good pendrive inaccessible for the recovery trial. You already have a bad drive. )

9 more replies
Answer Match 74.76%

windows update error "WindowsUpdate_80070BC9" "WindowsUpdate_dt000"
I am using windows 7 64 bit
I cannot install any important updates and haven't been since 8/2010
 

A:windows update error "WindowsUpdate_80070BC9" "WindowsUpdate_dt000"

These links from Microsoft Support will help you up....
Link 1
Link 2

PLZ go through these support links and do reply if the problem is solved......
 

1 more replies