Tech Problem Aggregator

Compaq Presario CQ40-310AU running Vista

Q: Compaq Presario CQ40-310AU running Vista

when i play farmville (facebk) i noticed that my laptop is slow. while my ram is 3gb already, dual core and im running vista business. do u think it has s/thing to do with vista??

A: Compaq Presario CQ40-310AU running Vista

My wife plays Farmville on my XP laptop that has just 1GB of RAM and an older Athlon64 CPU and it runs great.

Vista = resource hog.

8 more replies
Answer Match 101.64%

Hi,

Ever since I've bought this computer (beginning of 2009) my Compaq Presario CQ40 has been extremely slow. I don't really run much software on it, but it takes around 10-15 minutes to start up all processes.

I run Microsoft Security Essentials and Windows Firewall as security, but it previously had Trend Micro Internet Security in 2009.

I do Disk Cleanups, a full defrag through CMD and a chkdsk /r but it's still painfully slow.

The CPU fan is nearly always running all of the time, and after a quick Google this seems to be a problem in the Presario?

Any help would be greatly appreciated.
Andrew.
 

A:Slow Compaq Presario CQ40

10 more replies
Answer Match 99.54%

compaq presario CQ40 on "enter administrator password or power on password "is detected . How can i reset it .Please help me .

A:compaq presario CQ40 on "enter administrator password or pow...

Hi, At the password screen, hit enter 3 times and you should receive a 'halt code' - post back with this code. Regards, DP-K

5 more replies
Answer Match 99.54%

Hello everyone.

Pardon me if my problem sounds little funny.
I have Compaq Presario CQ40, windows 7 laptop.3GB RAM,320 GB Hard Disk.
Since past few days i m facing this problem, whenever i put on my laptop, and when the desktop opens, my laptop hangs in another 1 or 2 minutes. i have tried this around 5-6 times and still there isn't any improvement. i have also tried to set my computer to an earlier restore point, and have done this twice, still no improvement.

Shall i run recovery, i m afraid of data loss.

Can any 1 guide me what could be the cause, and what could be the solution.

A:My Compaq Presario CQ40, windows 7, hangs in 2 minutes.

Download VEW (eventviewer) by Vino Rosso http://images.malwareremoval.com/vino/VEW.exe
and save it to your desktop

Double click it to start it Note: If running Windows Vista or Windows 7 you will need to right click the file and select Run as administrator and click Continue or Allow at the User Account Control Prompt.

Click the check boxes next to Application and System located under Select log to query on the upper left

Under Select type to list on the right click the boxes next to Error and Warning Note: If running Windows Vista or Windows 7 also click the box next to Critical (not XP).

Under Number or date of events select Number of events and type 20 in the box next to 1 to 20 and click Run

Once it finishes it will display a log file in notepad
Please copy and paste its entire contents into your next reply

2 more replies
Answer Match 99.54%

Hi,
I'm trying to repair/reformat a laptop. It's a Compaq laptop, Presario CQ40. It originally had Windows XP but started giving a blue screen. I can't get anything to work now. Windows won't boot, all it gives is a registry error (software/hive). When I try to boot from the Windows XP disc, it starts the XP boot load, but right before it gets to XP Recovery Repair screen, it gives another blue screen. It says "Windows has been shut down to prevent damage to your computer. STOP: 0x0000007B (0xF7C1E524, 0xC0000034, 0x00000000, 0x00000000). I don't know what to try. Several internet searches have suggested turning the SATA to Legacy in the BIOS, but I have nothing in the BIOS that relates to SATA. I'm stuck. Please help!
 

A:Compaq Presario CQ40 laptop won't repair or run XP install

Blue screens can be caused y a couple of failing devices; HDD and RAM are most common. Substituting system components with good ones is a cheap way to solve problems like this. It's easiest to start with the system ram and you can easily eliminate the faulty component that way.
 

1 more replies
Answer Match 98.28%

Compaq Presario CQ40 Notebook PC VJ985PA#ABG 515AX? I have installed Windows 8 - but now cannot use func F4 to switch to external monitor. I get "Your PC can't project to another screen, Try reinstalling the driver or using a different video card." How do I do this? When I look in device manager it has Microsoft Basic Display Adapter.   

A:Compaq Presario CQ40-515AX Windows 8 & external monitor - on...

Try this driver: http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_125341_1 You have Radeon HD3450 video. 

1 more replies
Answer Match 98.28%

hello there,.. please help!

i have Compaq Presario CQ40-717TU Notebook PC,
the problem is


my netbook support for windows vista, but i want to downgrade it to windows xp, because some school work still using windows xp. I've been surfing everywhere.

I can a lot of tutorials some of which is flash the bios. update bios with its high risk.
As for some of them give a tutorial to make your own xp sata, using "nlite" and I became confused when I have to find a suitable driver for ahci [CQ40-717TU].

to the seniors and professors. please guide
where I have to download the ahci driver?

how do I update my bios (I still lay the problem update / flash bios).


thanks before...

A:Install Windows XP on Notebook Compaq Presario CQ40 717TU

First check for all the Win XP drivers for your hardware.
You can check your HP/compaq PC here:
General XP Downgrade Guide for HP Laptops - HP Support Forum
NOTE: Please read this thread fully.


If your Win XP CD, does not support your Sata Controller, you will need to load drivers to uses at F6.
Load Sata Controller drivers with a floppy disk is the best way.
SATA Drivers - Load in Windows XP Setup on Dual Boot
OR
SATA Drivers - Slipstream into Windows XP CD

4 more replies
Answer Match 89.88%

i have a compaq presario laptop and its running on vista. i want to downgrade it to windows xp. so i can maximize the usage of my laptop using high graphic gaming. or just other things. is it safe? how risky is it to downgrade your system? .... tnx

chin

More replies
Answer Match 89.46%

I can't seem to find the system drivers Windows 7 for "Compaq CQ40-517TU" I mean the chipset,audio,video and important drivers. I already look for drivers on HP sites but only HP bundled drivers are available. There is no drivers for system. Need help.

Software & Driver Downloads Compaq Presario CQ40-517TU Notebook PC | HP? Support

Compaq Presario CQ40-500 Notebook PC series*-* Download drivers and software - HP Business Support Center

A:Can't find "Compaq Presario CQ40-517TU" Drivers :(

Not sure how old this machine is, if no longer supported by manufacturer have you tried looking for vista drivers

I just followed your link and selected vista 32 bit and they are all there

4 more replies
Answer Match 88.2%

Compaq presario CQ61-223TU running Vista SP2 32bit, need ios for free upgrade to windows 7

More replies
Answer Match 86.1%

Hi Guyz, I have a problem with my laptop because it runs slow always. I think, I got a virus. Can someone please help me. I'm new to this, I don't know how to reformat my laptop. Please help me...
 

A:Solved: how to reformat a compaq presario laptop running windows vista w recovery par

8 more replies
Answer Match 85.68%

I just bought a laptop yesterday, Compaq Presario CQ40-340TU. It came with Windows Vista Starter OS. Because of the limitations with networking, I need to install Windows XP on this laptop now. I have my own installer of Windows XP and can't afford to purchase a different version of Windows Vista so that's not an option for me.

I really hope someone can help me find drivers for Windows XP for the following. I'm not even sure if they're the right specifications for my laptop model but I found them on a site selling the same model and from the HP product information page.

I already have nLite and I'm ready to integrate SATA drivers with my WinXP installer but I don't know which drivers to include. Please, help me!

Technical Specifications
Processor Intel® Pentium Dual Core T4200 (2.00GHz, 800MHz FSB, 1MB L2)
Chipset Mobile Intel GL40 express chipset
Operating System Free DOS
Graphics Intel GMA 4500 Graphics
Video Memory up to 1759 MB of Intel DVMT 5.0 (64 MB of Dedicated Memory, up to 1695 MB of Shared Memory )
Display Panel 14.1-inch WXGA High-Definition** Widescreen Display
Memory 1GB DDR2 800Mhz
Memory Slots 2 slots
Hard Drive 250GB SATA
Optical Drive Super Multi 8X DVD±RW with Double Layer Support
Networking/Wireless High speed 56K modem, integrated 10/100 LAN, 802.11 a/b/g WLAN, Bluetooth
Media card Integrated 5-in-1 digital memory reader slot (xD, SD, MMC, Memory Stick and Memory Stick PRO)
I/O Ports Built-in webcam, RJ-45, headphone, mi... Read more

A:Downgrading from Vista to XP - Need drivers for Compaq CQ40-340TU

I've already found the WinXP drivers for the graphics adapter and ethernet/NIC.
Basing it on the list of drivers available online for this laptop, the most important driver I need is for the chipset.
Also, for the SATA drivers that I should integrate in my WinXP installer, that I still need to find.
I don't know where to find them. I hope someone here can help me, pretty please.
 

1 more replies
Answer Match 84%

Whenever I log on to my Cmopaq CQ40 laptop it says it cannot find my profile and have been logged on with a temporary one. It also deletes everything I have saved/downloaded before (can't find it anywhere even doing a full search)

Please help!!

A:Logging on with a temp profile constantly, compaq CQ40 Vista Basic

bump, please help I can't get anything done because it keeps getting erased!

2 more replies
Answer Match 75.18%

Ok my compaq presario S3120AN has been running slow for awhile now and it seems to be getting slower :(. I have run Adaware spybot S&D and online virus scans but no matter what I do it still seems slow as a wet week I've posted my Hijackthis log is there anything wrong here please help.
Cheers.

Logfile of HijackThis v1.98.2
Scan saved at 10:51:45 PM, on 14/11/2004
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
c:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
c:\Program Files\Norton AntiVirus\navapsvc.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\windows\system\hpsysdrv.exe
C:\Program Files\USB Storage RW\shwicon.exe
C:\Windows\system32\HpSrvUI.exe
C:\Program Files\Hewlett-Packard\HP Share-to-Web\hpgs2wnd.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\Unload\hpqcmon.exe
c:\Program Files\Hewlett-Packard\HP Share-to-Web\hpgs2wnf.exe
C:\HP\KBD\KBD.EXE
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\WINDOWS\System32\rundll32.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Java\j2re1.4.2_03\bin\jusched.exe
C:\WINDOWS\System32\RUNDL... Read more

A:Compaq Presario Running slow help

I do see one little baddie in there.....

Reboot into Safe Mode (hit F8 key until menu shows up)

Run a scan in HijackThis. Check each of the following and hit 'Fix checked' (after checking them) if they still exist (make sure not to miss any):

O4 - Startup: PowerReg Scheduler V3.exe


Now, find and delete that file.

Reboot and post a new log.

2 more replies
Answer Match 75.18%

Hi all,

Can anyone suggest how to stop my CPU running intermittently at 100% please. I have scanned PC with MS Security Essentials, A-Squared Free, Spybot S&D and am running Windows Defender - nothing malicious found. Using Process Explorer, it showed many high SVCHost.EXEs running. I have manually turned some of these off now and CPU running at 30-60%. Not realy sure what I am doing and how to turn things off permanently - any suggestions greatly accepted!

PC has 1G of RAM and use an Intel 2.6Ghz Celeron processor - it's an old but useful laptop and would like to use it at it's normal speed again.

Many thanks.

M.

A:Compaq Presario 2500 CPU Running at 100%

Click start, run, type msconfig and press enter.

Under Startups, uncheck everything BUT your antivirus/firewall (if there)and close out.

Reboot and see how it operates for a day.

2 more replies
Answer Match 74.34%

Hello, I can use your help here please? Working on this Compaq Laptop running Win7 64 bit, laptop started working way too slow, i tried in this order Mbam which showed infections the first time, which it cleaned and then next scan did not show anything but laptop was still way too slow so I then tried, SAS, adwcleaner, JRT, none of these showed anything then Ccleaner, now the laptop works a lot better and faster but still slow, I ram memtest which showed no errors and unit has 2gb ram installed.
I tried running OTL but when I double-click on the icon, it asks to 'Choose Windows directory' but no matter which drive I choose from the list C or E [The Recovery drive], I get a prompt from the Runtime Scanner showing: Target is not Windows 2000 or later
Help?
 

A:Compaq Presario CQ60 running slow?

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/505671 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

3 more replies
Answer Match 74.34%

Hi Experts:

Neighbor brought down his Compaq Presario 6010US machine complaining about running very slow, and trying to get rid of Spyware Nuker that NAV was complaining about. Machine has an AMD Athlon running at 1.4 gHz with 224 MB RAM. Tried Norton's removal method to no avail; Program Add/Remove couldn't find it. Installed Spybot S&D, did updates, ran it, removed everything bad it found. Did same thing with AdAware.

Downloaded HJT, put in a separate folder in My Documents, logfile is as follows:

Logfile of HijackThis v1.99.1
Scan saved at 10:56:14 AM, on 3/17/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\PackethSvc.exe
C:\Program Files\Compaq\Compaq Advisor\bin\compaq-rba.exe
C:\Program Files\Symantec\DeepSight Extractor\ExtractorService.exe
C:\Program Files\Norton Internet Security\Norton AntiVirus\navapsvc.exe
C:\WINDOWS\System3... Read more

A:Solved: Compaq Presario Running SLOWWWW

14 more replies
Answer Match 73.92%

Hi all,
 
Haven't had to use your services since around 2012, thankfully, but seem to have picked up something I can't shake thru conventional (for me) methods.
 
Symptoms : the laptop runs normally for the first 5 mins from startup, then suddenly each access to File Manager, or any page on the internet through Chrome, takes 10-15 times as long as normal. The hard disc seems to be running (flickering light) almost all the time, whether a page is being requested or not. Task Manager shows the CPU at around 64%, pretty much steadily, while idle.
 
Hardware : Compaq Presario CQ 81 laptop, running Windows 7.
 
History : no previous infections since 2012, when I installed Malwarebytes' Anti-Malware and rid everything that infected the same hardware being used now. The Anti-Malware has been resident since then, showing no infections, until last week.
I have not downloaded and run any new programs in the last 2 weeks.
The hard drive is only 50% full, with plenty of space, and does not need de-fragging.
This is a home computer that has never run a game, nor very large apps, in it's life.
It mostly surfs the internet on demand, and is rarely left connected to the internet for more than 4-6 hours at a stretch.
 
Clean-up attempts so far :  I have run in Safe Mode - iExplore, JRT, Tdsskiller, AdwCleaner. Malwarebytes Anti-Malware found over 70 infection on the C: drive, and cleaned them all out. Subsequent runs in Safe Mode have found nothing. iExplore foun... Read more

A:Compaq Presario CQ 81 lappie w/Windows 7 running slow

Hi JonWhat is your Browser?Empty your temp folders using TFC (Temporary File Cleaner)Please download TFC by Old Timer and save it to your desktop.alternate download linkSave any unsaved work. (TFC will close ALL open programs including your browser!)Double-click on TFC.exe to run it. (If you are using Vista, right-click on the file and choose "Run As Administrator".)Click the Start button to begin the cleaning process and let it run uninterrupted to completion.Important! If TFC prompts you to reboot, please do so immediately. If not prompted, manually reboot the machine anyway allowing Windows to load normally (not into Safe Mode) to ensure a complete clean.Install your game.>>>>ESET.Hold down Control and click on this link to open ESET OnlineScan in a new window.Click the button.For alternate browsers only: (Microsoft Internet Explorer users can skip these steps)Click on esetsmartinstaller_enu.exe to download the ESET Smart Installer. Save it to your desktop.Double click on the icon on your desktop.Check "YES, I accept the Terms of Use."Click the Start button.Accept any security warnings from your browser.Under scan settings, check "Scan Archives" and "Remove found threats" Click Advanced settings and select the following:Scan potentially unwanted applicationsScan for potentially unsafe applicationsEnable Anti-Stealth technologyESET will then download updates for itself, install itself, and begin scanning your computer. Please be patient as this can take some t... Read more

16 more replies
Answer Match 73.5%

Product Name and NumberHP Compaq Presario CQ40 (339TU) Operating System installed  Windows 8 Pro (recently re-installed) Any changes made to your system before the issue occurredAccidentally deleted the system reserved partition (approx. 300MB) The IssueI have recently re-installed the OS on my notebook (the previous OS was the same). I wanted to do a clean install and I accidentally deleted the System Reserved partition which was approximately 300MB in size. The install completed without any problem. After installation I noticed that the native resolution has become 1200x800 (3:2) where it was originally 1280x800 (16:10) and also the display is detected as "Mobile PC Display". I went through the Windows Update but it also couldn't detect my drivers. I went to the official HP TechSupport site (here's the link) but it had no drivers for Windows 8.Then I tried the Intel site and found the drivers, installed them but still nothing happened. I googled for 2days to solve this, found nothing that worked. I Re-Installed, Reset, Refreshed, Automatic Repaired, the PC from the windows installation CD, nothing worked  I had used Windows Vista, 7, and 8 on this notebook. The previous version of windows I used for 1.5yrs is the same one I installed now from the same CD. Previously when I installed windows and went to Windows Update, it detected all my drivers and updated them. I had nothing to worry about. I was hoping that someone here would find m... Read more

A:Presario CQ40: Display has incorrect resolution and ratio ev...

I fixed it!! I downloaded the latest bios and flashed it. Previous bios version was same but now my resolution is back to 1280 x 800  I didn't make myself any recovery discs previously, but I sure will from now on. As I don't have any way of identifying what actually caused the problem, I'll stay happy with the solution I found. This thread can now be marked "solved". Thank you very much for trying to help. I love HP!

5 more replies
Answer Match 73.08%

hi,


Code:
Operating system installed
FreeDOS
Processor type
Pentium? Dual-Core Mobile Processor T3200
? 2.0 GHz, 1 MB L2 Cache, 667 MHz FSB
Standard memory
1024 MB
Memory type
DDR2 667MHz
Memory layout
(1 x 1024 MB)
Maximum memory
Supports up to 8 GB DDR2 memory
System features
Internal drives
160 GB
Hard disk drive speed
5400 rpm
Optical drive type
SuperMulti 8X DVD?R/RW with Double Layer Support
Display size
14.1? Diagonal WXGA High-Definition HP BrightView Widescreen Display
Display resolution
1280 x 800
Graphic subsystem name
Intel Graphics Media Accelerator 4500MHD (shared)
External I/O ports
3 USB 2.0, 1 HDMI, 1 VGA, 1 RJ-11, 1 RJ-45, 1 Stereo headphone-out, 1 Microphone in
Speakers and microphone
Altec Lansing? speakers
Webcam
Webcam with Integrated Microphone
Network interface
Integrated 10/100BASE-T Ethernet LAN (RJ-45 connector)
Modem
High speed 56K modem
Wireless technologies
Wireless LAN 802.11b/g

it so happened that a laptop of my friend suddenly freezes that it needs to take of the battery for it to shut-off. during that point any options regarding back-up is impossible. So what i did is reformat it in windows XpSP2 but i have audio problem. Now i purchased vista premium but i cannot get the correct drivers for sata. Does anyone here has a copy and would like to share to me will be highly appreciated

A:compaq CQ40 108TU

What OS are you running & what was the previous OS?

Your system info says

Code:
Operating system installed
FreeDOS
You mentioned that you installed XP SP2. You are in the Vista Support forum.

1 more replies
Answer Match 73.08%

Hi everyone,

It seems like the BSOD is chasing me...

This time it's about my own laptop.

Its a Compaq cq40 and It's been acting very strange since a couple of weeks.

Suddenly a BSOD will come up and restar my computer.... but I can still use it...

I'd like to fix it before trying to format the entire disc....

I'm posting the dump files...

Thanks in advance!
 

A:BSOD Compaq cq40

It seems like you may have bad memory and reinstalling windows will not fix this issue.
What you should try to do is get a copy of MemTest.

http://www.memtest86.com/

Burn it to a CD and check your RAM. Let it test about 3 times, as if it passed 100% once it may not be an accurate result!

Post back if you need more help or if you are ready to continue.
 

3 more replies
Answer Match 72.24%

I need to completely reformat my compaq presario but have no idea how to format it since it is using vista. help help me do it step by step. thank you.

reen

A:Compaq Presario Vista

1. turn on computer and tap on F11 repeatedly until the Compaq screen disappears
2. click Advanced Options
3. select system recovery (may say restore the computer to factory settings)
and click recover without backing up files, click next

It will do the rest on its own.

Do this with ONLY mouse, keyboard, monitor and power attached. If you added any parts inside other than ram you will need to remove them to ensure it works properly.

Thats all!

2 more replies
Answer Match 72.24%

A friend of mine brought me her Compaq Presario S5140WM Desktop PC for help installing a new graphics card. What I found was that her computer was soo infected with viruses and spyware that some of the files needed to install the new drivers was corrupted and the hardware driver install failed. I ran an online virus scan from Trend Micro (Housecalls) and used Spybot S&D and Ad-aware SE to clean up what I could. After all that, I ran another online scan using Panda Active Scan and the results of that scan showed that she still had spyware and a number of Trojans which Housecalls was not detecting. I recommend that she back up all critical files and run the HP recovery program which was located on it's own partition on her HDD. It seems that she must have encountered some sort of a problem with the recovery because Windows now reports that she has less than 100MB of HDD space available on an 80 gig HDD.

She really doesn't want to go through the process of running the recovery again. Is there a way of correcting this by other means? Before she ran the System Recovery, she had approximately 41 gigs free on the HDD. From what she is telling me, it sounds like Windows created a complete system backup that was not deleted once System Recovery was completed.

What do you think.

Keith

A:Low HDD space after running HP system recovery on Compaq Presario S5140WM Desktop PC

I would run the recovery again, and pay special attention for option to format the drive before installing windows.

HP (I believe) calls it a destructive install - as it wipes the partition removing all data from it.

2 more replies
Answer Match 72.24%

Hye.... My notebook cannot be able to format.
Compaq CQ40, and i want to know that what software the best for my notebook...

A:Enable to format Compaq CQ40

Why do you want to format?
You need to be more specific of what you want to do

1 more replies
Answer Match 72.24%

I want to change my OS into Windows 7.I need the drivers of my notebook.Where i can find the drivers??.(I need all the drivers to get the best performance)

Thranks,my english is very bad

A:Drivers For Compaq CQ40-505LA

Just select 32 bit or 64 bit 7. Fabe http://h10025.www1.hp.com/ewfrf/wc/s...roduct=3966049&#

4 more replies
Answer Match 71.4%

And it crashed today. I'm not sure why but I think it was because of Java
and the IE8 I just installed a couple of days ago. I went crazy it took me all day to fix it. It even changed from DSL to the wireless connection...what's really weird is I don't even know how to hook that up!
So anyone have the same problem don't want it to happen again it was a mess.
 

A:I have a Compaq Presario Notebook with Vista

I think this would be better off in the Vista forum. I will move it there.
 

1 more replies
Answer Match 71.4%

The following was sent to me as a PM. I have reposted it here so that others may be able to assist Betsy with her problem.







Originally Posted by bessiemickol


Please help, i have tried everything, my computer will not start up and when I put in recovery disk I recieve an error message on disk 7 0x4001100200001005, I have recovery and repair cd and it does nothing states I have no driver or any operating system on the computer and when I try to install it will not stating that i am missing driver. I have been looking for answers for days now and many hours but I see you do know what you are talking about a lot, please point me in the right direction! Thanks, Betsy

A:Vista and Compaq Presario C700

Here is the main support page for the C7xx series. Select your product from the list below*You entered "Presario c700" Note that there are 6 variations of the C700 model, so pick the correct one.

5 more replies
Answer Match 71.4%

I have had a hacker who put 5 high level malware items on my computer registry. I know this since I saw it posted on the computer screen. Since then the computer has been more restricted. A week ago the hacker decided to wipe the Vista settings.

Now, I just have a screen that has the logo COMPAQ repeated across the screen. There are pink vertical lines that are about an inch high. It says in the lower left hand corner, Vol. 5.11.

On the lower right hand corner, it says ESC =; F10=; F11=. I need to be in front of my computer at home. Now I am on a library computer.

The computer is stuck or frozen.

Do you have any suggestions as far as shortcuts. Before all these things happened, the computer was full of the hacker's crap. The Norton Symantec would or could not be downloaded and installed.

Please help.

Sincerely,

Adam Dobkin
 

More replies
Answer Match 71.4%

Hi,

I tried to help my sister by formatting her Vista computer and installing XP, now I am missing all the important drivers. What do I do? Where can I get all the drivers for XP version.

Thank you

A:Compaq Presario SR5010NX vista to XP

You need to paste the specs of what system your running!

5 more replies
Answer Match 71.4%

My internet explorer wont let me open it. Everytime I open internet explorer it just says it has stopped working is the message I keep getting. Please help

A:I am using a Windows Vista Compaq Presario

Welcome to TSF. Please post the exact wording of the message you receive.

1 more replies
Answer Match 71.4%

All scans suggested in the "preparation" topic come up clean. However, The computer will not turn off or restart. Choosing either command through the start menu leads to nothing happening at all. I assume that this indicates an infection that is not caught by the scans.Thank you very much for your help as I don't know what I'm doing here at all. I don't know what other information you might need so please ask. My mother also thanks you wholeheartedly!Logfile of HijackThis v1.99.1Scan saved at 1:11:11 AM, on 8/2/2006Platform: Windows XP SP1 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\system32\HPConfig.exeC:\Program Files\HPQ\Notebook Utilities\HPWirelessMgr.exeC:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXEC:\WINDOWS\System32\ctfmon.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Linksys\Wireless-G Notebook Adapter\WPC54Cfg.exeC:\Program Files\Hewlett-Packard\Digital Imaging\bin\hpoevm08.exeC:\Program Files&#... Read more

A:Unknown Malware On Mom's Laptop (a Compaq Presario 2100 Running Xp Home 2002 Sp1)

Hi angelface and welcome to the Bleeping Computer forums. My name is Whisperer and I will be helping you with your problem. Although I am experienced with computers, I am currently a Trainee in Malware removal and, as such, ALL of my fixes will be vetted by malware experts. Please accept our apologies for the delay.I would like you to produce a list of installed programs to assist me in any cleanup. To do this open your HijackThis Click on Open the Misc Tools section or Config? button, depending on how you are set up. If you used the Config... option then click the Misc Tools tabSelect Open Uninstall Manager , a list of your installed programs will be displayed.Select the Save List? button and save the file to your desktop.Please post a copy of this list and an up-to-date HijackThis log in your replyGT

6 more replies
Answer Match 71.4%

My up presario CQ40 series popped with the message enter adminstrator password and I tried my regular pass word that I always use to log in to no avail the system disable message came up as 58530902 if anyone can figure out the power on pass it would be greatly appericated.help me, please!System DisableKey: 58530902

A:enter administrator password (HP compaq cq40)

Try this Password:47498324 or 00586459

4 more replies
Answer Match 71.4%

Hello all.Just as the title said.

My Notebook is HP/Compaq CQ40-323AX. When I seed the windows7, I love it at once. And I have installed win7 to virtual pc. But I want to install win7 to my notebook but not virtuall pc. So some problems occured. It's the driver. Because the win7 was based on the vista, I think it may run well when useing the vista drivers (The drivers were downloaded at www.hp.com.cn)


Who can tell me I can do as I think? It's my thought right?
Or someone can give me a better way!

Thank!

A:Can I install windows7 to my HP/Compaq CQ40-323AX?

How is the performance under Vista Ultimate? If you are using Vista Ultimate there should be no problem upgrading or even 'Fresh' installing windows 7.

Yes, a lot of Vista drivers work with Windows 7 (just right-click the setup file and in properties select Compatability for Vista). This works about 90% of the time, if installing build 7068 you may not even need to update your drivers.

NOTE: You will need to backup you existing files (pictured/documents/music/videos etc) and make sure you've got an installation disk for Vista in case the upgrade/install fails.


P.S sorry for the late reply

9 more replies
Answer Match 71.4%

help pls.. compaq cq40 system disable key 56802920

A:help pls.. compaq cq40 system disable key 56802920

@superhidden2008? Enter   49760306 Regards, DP-K

1 more replies
Answer Match 71.4%

Hello all,

I have some problem here, i have install Windows 7 and i got missing driver name "Base System Device"

What driver for that Base System Device, and how can i got that driver for Windows 7.

FYI, i am using Compaq CQ40-126AU..

A:Base System Device on Compaq CQ40

First of all, are all your peripheral devices (printers etc) working?

If they are is there anything in your pc that is not working?

9 more replies
Answer Match 70.56%

I finally got a reaction from this machine it will still not power down without unplugging and battery out. at first just black screen with options at bottom, once it allowed me to changed boot order but when I put cd in it won't boot either. No safe mode nothing. I did finally after months get this just now...
As follows: PhoenixBIOS 4.0 Release 6.1
copyright bla blah

F.32
CPU0(zero) = AMD Athalon Dual Core QL-62

CPU Stepping = B1 2000 Mhz
MemClk = 333Mhz Tcl = 5.0 Tcrd = 5 Tras = 12 Trp=5
CPU<->MCP:LDT Frequency =1800Mhz LDT Width = 16bit DOWN -16bit UP
601K System RAM Passed
1918M Extended RAM passed
1024K Cache SRAM Passed
System BIOS shadowed
Video BIOS shadowed

P.S. I pulled the hard drive and hooked it to my desktop with a USB powered or unpowred tri hdd diagnostic device and it read the drive but wont let me explore it but it does start to run through files almost like it was trying to install itself on my machine so I cancelled it.
So I think the hard drive "might" be good still or slightly damaged.
Also F2 (start up check) will give me a please wait message...foerever.

Can anyone help with that little bit of info?
Thanks,
Doc

More replies
Answer Match 70.56%

I bought this laptop which has AMD Turion processor and it comes with 512 mb RAM and Windows Vista OS. Wanted to upgrade the RAM and tried adding Kingston 1gb stick.
After installing the RAM and rebooting, i opened the windows explorer, I see that the window closing button (in red color) gets distorted. If i take the mouse over that button, the red color spills out of the boundary of that button. Generally some icons gets distorted.

If this is the problem with RAM what RAM can i use (Am planning to try using Transcend RAM also).
Or is it the problem with the operating system ?
Is it a good idea to continue using this RAM if the display issue is acceptable ?

thanks
Indra
 

A:Compaq presario - Windows vista - upgrading the RAM

It is kind of in the air. Could be the memory, you might want to check and make sure that it is the same speed ect. Or it could be vista. I personally wont buy vista for a couple more months, let them work the bugs out and make more compatible drivers for all my devices. That n it might get cheaper.
 

3 more replies
Answer Match 70.14%

Repairing a COMPAQ Presario running Vista Basic.
My problems are that the OS wont boot fully, it stops and then freezes.

Then on restart BIOS will run through and give me a choice to repair or boot normally in which I select repair which then runs through until it gets to

!! 0xc0190036 !! 3005/67034 (icardagt.exe)

Here it stops and blinks the text infinitely.

I would provide an HJT log but I can't even get in to do that.
Considering that I can get the BIOS to go through I'm assuming software but if anyone has any ideas that it may be hardware please share. The only hardware that I believe would be a problem at the moment would be the HDD, however it ran efficiently when I was extracting data from it.

Any help regarding this would be appreciated

Thanks,

Annashi
 

A:Solved: COMPAQ Presario Vista Basic Problems

Does it have Sp1?
 

2 more replies
Answer Match 70.14%

How do I take my PC back to factory settings ? I don't have a disk that works. I tried shutting it down and starting it back up pressing F11 . That was supposed to take me to the recovery manager but nothing happened. I think the computer is very badly infected with viruses and all I know to do is take it to factory settings or trash it.

A:2005 compaq presario SR5410F Desk Top With Vista 32

Here is a link to a video tutorial provided by Compaq to walk you through the system recovery process:http://h10025.www1.hp.com/ewfrf/wc/...message edited by btk1w1

3 more replies
Answer Match 70.14%

This laptop has a shutdown issue. It wont launch msconfig unless it's in safe mode. It also has corrupted files showing from running sfc scan.
It has a MacAfee antivirus. I ran Malwarebytes, Hitman Pro, AdwCleaner,  and it found nothing but some cookies. 
I think it has something worse going on. Will FRST run in safe mode?

A:Messed up Compaq Presario CQ60 Vista Basic

You cannot post a FRST log in the Windows forums.
 
Please post the sfc log in your topic.  Do not post it in code or in quotation, and do not use a host site with will download the log to my computer.
 
To find sfc /scannow log, type cmd in the Search programs and files box. 
 
cmd will appear above the search box under Apps., right click on it and choose Run as administrator, this will open the Elevated Command Prompt.  This will look simlare to the image above.
 
Copy and paste the following in the Search programs and files box, then press Enter.  
 
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >%userprofile%\Desktop\sfcdetails.txt
 
This will place a new icon on the desktop titled sfcdetails.  Click on this to open the log, copy it and paste it in your topic. 
 
 

 
 
***This is a diagnotic tool for Windows Vista, Windows 7, and Windows 8.  This will not repair your computer, but it may point to where the problem lies so that a repair can be made.***
 
Warning:  Disabling items in Services or Startup may leave your anitivius disabled until the process is ended.  For this reason I would suggest that you perform this process off line.
 
Step 1
 
(1)  Click on the Start orb, then type msconfig.exe in the Search programs and files box.  
 
(2)  When msconfig is seen in the pane above the search box and under Programs, right click on it, then cli... Read more

12 more replies
Answer Match 70.14%

Well, my problem is a strange but persistent one. It appears my PC WILL boot and start but right after the microsoft loading bar, the monitor goes pitch black and stays off and I'm not sure if the PC is on but it lights up as if it were but won't do a thing.

Now, I've tried everything Vista has to cure this (Startup Repair could not diagnose ANY problems). What is the deal here?

Any help, especially quick and urgent would be appreciated as I NEED this laptop for work,
 

A:Compaq Presario F700 w/ Vista boot errors?

Hi

your monitor isnt supporting the refresh rate or screen size selected, you will need to start in safe mode and set it to 640X480 and then reboot back into normal mode.

If this doesnt cure it start it safe mode and use device manager to remove the video card, reboot and let Vista refind it, you may need to update the driver.

regards
 

1 more replies
Answer Match 70.14%

Here`s my question.

Is it possible to recover or view files that were not backed up at all before or during the factory recovery?

I`m not talking factory restore, Im talking factory recovery.
My D drive is the factory image partition.

I recently did a factory recovery which apparently completely wipes all memory that was not backed up and restores the computer to its original factory shipped condition.

The harddrive, before the recovery, had some personal information, bank info and whatnot, that was deleted, however, my computer is gonna be sold soon and knowing that people can recover deleted files even after having deleted them, I decided to use factory recovery as well to insure the safety of my info.

I am, now, just confirming that the files are indeed safe.Is there any way to recover them, even after the recovery?

Im running on a Compaq presario vista 32

A:Factory recovery question for vista 32 HP compaq Presario

Hi -

There are many different standards when it comes to clearing and sanitizing hard drives. Some are satisfied with writing zeroes over each byte - 1 pass. Others want 35 passes with variable characters written.

Is it possible that someone could obtain your personal info from the hard drive? Yes. Is it probable... probably not. There is never a guarantee - especially with unknown future technological advancements.

If you want complete peace of mind on this subject - replace the hard drive. For near-complete peace of mind - wipe the entire HDD with KillDisk then re-install Vista.

KillDisk - http://www.killdisk.com/downloadfree.htm

Make bootable KillDisk ISO CD w/ ImgBurn -
ImgBurn - http://www.imgburn.com/index.php?act=download

Regards. . .

jcgriff2

.

1 more replies
Answer Match 69.3%

Hi, I read through the posting and did not see a definitive answer for why my laptop boots to six screens. I am a missionary teacher in Roatan, Honduras and I took it to a tech shop who said it was the inverter but he did not test it and the color/brightness looks fine. I don't want to spend money on an inverter unless it is the problem.

Is there a solution? I tried safe mode on Vista but could not get to the screens indicated. Please help if you know a solution!

Thanks
 

A:Compaq Presario C700 6-split screen Windows Vista

8 more replies
Answer Match 69.3%

i have a compaq presario SR5210NX with windows vista
someone could help me.in the file /windows/system32/ntkrnlpa.exe ,the stste is 0xc0000225 ,the information says that the kernel doesnt response or isnt working.
a guy told me to try that turn on the APIC and then disable it.but i dont know how.somebody could help me

A:compaq presario SR5210NX windows vista home premium

hi and welcome you could try sfc/scnw http://www.vistax64.com/tutorials/66...c-command.html and see if it can fix the error the apic http://en.wikipedia.org/wiki/Advance...upt_Controller gives an explaination of this also from what i can find out this may cause your system to run on one core other advice is a bios update the apic is in the bios and can be disabled there please note all the info given here is for that purpose only (info) any changes made to your system or bios are done at your own risk

1 more replies
Answer Match 68.46%

Hi,

I turned on my laptop this morning to find that the touch pad doesn't work. This wasn't really a problem as I generally use a plug-in mouse, however, upon restarting my computer again, my keyboard also doesn't work.

I'm running Vista 32 bit and I have no idea what to do.

Does this sound like a software problem or a hardware problem? Is it possible that I have a virus that is causing this?

Would my best solution be to re-install Vista?

I have everything backed up so I don't mind doing that, however, I don't know how. When I bought my laptop Vista was pre-installed so I don't have the CD.

I'd be very appreciative to any help you guys could offer!

More replies
Answer Match 65.1%

i dont know anything about computers so i will need a detailed explanation and i need to know how to fix it!! it just stays on the compaq screen

A:My Compaq Presario 2500 wont go pass the compaq screen

Hello lilevee22,

Before the problem started was anything added to or installed on the system?

Try booting to Last Known Good or Safe Mode.

Restart the computer during the boot process repeatedly tap "F8" you should get

the Advanced Options.

Let us know if able to get the system to boot with either option.

1 more replies
Answer Match 65.1%

Hi, My Computer a Compaq Presario SR1810NX with Windows XP Home Edition SP2 is having an issue with it wont get past the Compaq Logo Screen, like, I press the power button the PC powers on, Fan Speeds up and then slows down as normal, keyboard lights flash as normal and the Compaq Logo along with the v3.48 and ESC = Boot Menu options appear on screen, the things is that it wont get past this screen, it just sits there at the Compaq screen, the keyboard and mouse dont seem to be interacting with the PC since I press ESC or F10 for boot mode or system recovery but the PC wont answer at all, I've already Disconnected power source unplugged mouse, keyboard all but PC is doing the same thing just sitting at the Compaq Logo Screen, the computer doesnt make any sound at all no beeps or anything, it wont let me access Windows at any time, recent installations well could be that I just installed a Mobile Bandwidth Card just a couple of weeks ago, and also just a few days ago I connected my iPod Shuffle 2nd Gen to the computer and the computer wont recognize it at all, not even charging, I know this might be a virus or malicious software, but my computer has barely connected to the internet in the last weeks (I couldn't pay the Internet and I had to use my friend's Mobile Bandwidth Card I mentioned before) all I did while in Internet with the Mobile Bandwidth was some schoolwork and youtube videos, I need help urgently with this since I have to deliver a very important proyect for scho... Read more

A:Compaq Presario SR1810NX Not Getting Past Compaq Logo Screen

Try a power drain.
1. Unplug power cord
2. Hold power button in for 60 seconds or more then let go
3. Plug in power cord
4. turn on the power and try to boot to setup (BIOS)

If it enters the BIOS then you should be able to just press F5 to reset to defaults and then F10 to save and exit. The PC should work now.

However, if after the power drain you still can not get in the BIOS than there is a MAJOR problem which would require some type of repair.

1 more replies
Answer Match 64.26%

Cant find the neccessary drivers for the internet have been here

http://h10025.www1.hp.com/ewfrf/wc/...en&cc=us&dlc=en&sw_lang=&product=3559331#N337

None of the drivers for ethernet or my wireless card work ???

This is a friends latop they had a virus so i reformatted and now no internet via wirless or wired
any help appreciated.

The virus was a virut file infecter virus so i was afraid to save any of the drivers for fear of reinfection.

Edit:

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista&#8482; Home Premium , 32 bit
Processor: Intel(R) Pentium(R) Dual CPU T2330 @ 1.60GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 1525 Mb
Graphics Card: Standard VGA Graphics Adapter, 5 Mb
Hard Drives: C: Total - 102547 MB, Free - 89975 MB;
Motherboard: Hewlett-Packard, 30D9, 83.21, CND80437PP
Antivirus: None

If any more info is needed let me know!!!
 

A:Solved: Laptop Compaq Presario C700 (from HP Compaq)

14 more replies
Answer Match 60.48%

Good people

I fixed several annoying problems with help from a furum member, but in the process sounds, start-up +Microsoft noises through the inbuilt speakers have disappeared.
When I plug my Skype in via USB port minimal sound can be heard, as can through headphone speskers when plugged in. The media player handles a CD with similar result.

When I look at the volume indicator in the bottom right tray, it indicates fluctuating levels maybe 3 - 6%, despite the control being at 100.

All today I have been reading various answers on forums, but cannot find any solution. Many suggestions suggest I g to places on Control Panel that do not exist under the name supplied.

Does anyone have any idea(s) where I might find a way to fix this?

Many thanx in advance

Hope this is in correct thread !!

erw

A:Sound 99% inaudible Vista CQ40 Notebook

Hello & welcome to the forum,

Please look here for the latest drivers for your system & start from there!

Compaq Presario CQ40-100 Notebook PC series*-* Download drivers and software - specify product name - HP Business Support Center

16 more replies
Answer Match 60.06%

Hello all.

My girlfriends roommates computer is a Compaq F500. She went home for the weekend and left her laptop at her dorm room. When she came back her wireless no longer worked.

There is nothing in the device manage under network adapters for wireless. the switch to turn on the wireless on the front stays orange not blue when she turns it on.

Any ideas?
 

A:Compaq F500 running Vista and having network issues

16 more replies
Answer Match 60.06%

? OS - Vista ? x86 (32-bit) ? Linux and Windows Vista Home Basic ? OEM Version ? Like 3 to 4 years ? 3 to 4 years and i haven't reinstalled it ever. ? HP Compaq dx2400 Microtower ? Video Card is Intel(R) G33/G31 Express Chipset Family ? MotherBoard PEGATRON CORPORATION 2A73h 1.01 ? Power Supply - Liteon - 300W
The perfmon report said Error im sorry i cant post it.. Hope you can help me anyways, thank you

A:BSOD on HP Compaq dx2400 Microtower running Vista

Missing Service Pack 2:
SP1 isn't installed, please do the following:

Quote:




Installing Windows Vista Service Pack 2
1. Visit the PC manufacturer's website and update ALL drivers. DO NOT use Windows Update or the "Update drivers" function of Device Manager.
2. Check Device Manager for any unknown/disabled devices - if there are unknown/disabled devices, fix them with the latest drivers from the device manufacturer's website (not the PC Manufacturer)
3. Visit Windows Update and get all updates
4. Visit Windows Update and get Service Pack 2 (usually under Important Updates). Read these notes for installing SP2: Learn how to install Windows Vista Service Pack 2 (SP2)
5. Visit Windows Update and get any other available updates




These 2 devices are disabled:

Quote:




Microsoft 6to4 Adapter ROOT\*6TO4MP\0000 This device is not working properly because Windows cannot load the drivers required for this device.

802.11n Wireless PCI Express Card LAN Adapter PCI\VEN_1814&DEV_0781&SUBSYS_760011AD&REV_00\4&1888C532&0&00E1 This device is disabled.




Open up Device Manager, right click on the Microsoft 6to4 Adapter and select "Uninstall". When you reboot the device will come back (if needed). In most cases it doesn't come back as it's not needed.

As for the Wireless PCIe LAN adapter - if it's deliberately disabled, please enable it...uninstall it's sof... Read more

1 more replies
Answer Match 59.64%

My hard drive failed and I replaced it with a refurbished one. The CD-ROM drive had previously malfunctioned and I replaced it with a used one. I purchased Windows 7 Professional for Refurb PCs and have not been able to install it. The CD-ROM clicks a few times and tries to start up then stops. Sometimes a blinking cursor appears in the upper left screen for awhile but then changes to "Operating System not Found." I tried installation from an old Atapi external CD-ROM (formerly known to be OK) but that won't spin up either and the OSNF message appears. I have not messed with the boot order because I thought booting would be attempted from whatever device contained the Win 7 disc. Does anyone have any ideas as to whether the program disc, CD-ROM(s), replaced hard drive or something else is involved. I have about $80 invested here. Thanks for your ideas! Frank 
 
 
 
 

A:Can't Load Windows 7 Prof on a Compaq laptop formerly running Vista

A number of things come to mind...
Have you at least checked the BIOS to see if the optical drive is listed first in the boot order?
You can test the Windows 7 disc on another computer to see if it boots up.  That way, you'd know for sure whether the disc boots.
Are you certain the optical drive is working?  You might want to download something like Puppy Linux and burn a disc on a known good computer then test the optical drive with it.
Let's say you get the disc or optical drive to work, do you know whether your computer is capable of running Windows 7?  Did you run the Windows 7 Upgrade Advisor?

1 more replies
Answer Match 57.12%

How do you open the casing on compaq presario 5304. I don't want to breakit.\

Thanks.
 

A:compaq presario

Link to tell you all about your computer. http://h10025.www1.hp.com/ewfrf/wc/...ry&tool=prodinfoCategory&dlc=en&product=93186
 

1 more replies
Answer Match 57.12%

ok when i start up it shows the compaq logo then theres some beeps and it goes to a black screen. Any help? any way to reset all my stuff? i press f11 and it goes to some bios thing and i really dont know what to do. Thanks
 

A:Compaq presario help

16 more replies
Answer Match 57.12%

I have a compaq presario. I have 2Gig memory. I changed services from ATT to comcast internet. now my pc needs to be wiped clean and set up again but when I got the computer I did not get the discs. how can I do this without discs> it wont open up the internet even though I am connected.

Please help
 

A:compaq presario pc

8 more replies
Answer Match 57.12%

I friend of mine purchased this Presario in 2004. She hasn't had internet since about 2006, so she hasn't had any of the updates since then. I brought her tower home with me since I have internet to load her updates. We're trying to get it internet ready. When I brought it home last week nothing would open. So yesterday she gave me the system recovery disc. I started with the Standard Recovery, but there were too many files that it couldn't recover. So I then decided to do a full recovery. After the full recovery it was rebooting and it told me that not all the system could reload and I couldn't hit okaybecause it wouldn't read / acknowledge my mouse. So, I unhooked her computer and rehooked mine to see what her alternatives were. I found a website, they wanted to know all the things it wouldn't oload. All I can remember is that it was things that could me downloaded later like: Norton, AOL, Adobe, MSN, and QuickTime.

So, I unhoked mine and rehooked her's up (and booted up my laptop). When her's came back up it's saying: NTLDR is missing Pres Control + Alt +Delete to Restart

My question for you is there anyway I can save her conputer? She doesn't have a lot of funds, being a singe mother of a 7 yr old and I'm just a good friend trying to help her out.

Thank you in advance for any help you can provide

A:Compaq Presario

I decided to see what happened when I ctrl alt delete and then decided to do another recovery. Here's some more info (could not recover errors):
1. C:\WINDOWS\Help\SB\Training\WXPPer\Content\Wave\[email protected]
2. C:\WINDOWS\System32\ntdll.dll
3. C:\WINDOWS\System32\ntkrnlpa.exe
4. C:\WINDOWS\32\dllcache\dinput8.dll
5. C:\Windows\systme32\dllcache\licdll.dll
6. C:\WINDOWS\system32\dllcache\locator.exe
7. C:\WINDOWS\system32\viaservc.dll
9. (Black screen instead of error message)
9. C:\WINDOWS\Installe152ec/msi
10. C:\WINDOWS\Installer\1b2cc.msi

then all of after about 20% a big blue screen with following:
A problem has been detected and windows has been shut down to prevent damage to your computer.

IRQL_NOT_LESS_OR_EQUAL

If this is the first time you've seen this stop error screen, restart your computer. IF this screen appears again, follow these steps:

Check to make sure new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced startup... Read more

3 more replies
Answer Match 57.12%

sir, can u help me, i can't fint my driver for compaq presario v3760TU
previously, i used vista home basic but i convert to window seven.. but i can't find my driver in hp/compaq driver web.. plzz help me..
-sory for my english so bad..

A:compaq presario

Were you at this Hp/Compaq download page ?


Software & Driver Downloads Compaq Presario V3760TU Notebook PC - HP Customer Care (United States - English)&

6 more replies
Answer Match 57.12%

ok I hace a compaq that is all messed up. lets see one day the monitor would not work after a storm. Bought another, For a while the screen would be blue but change back to normal. The pc also would have a hard time starting up after it was in idle. We would do a hard start and for a while that worked. Now when I try to start it it turns on but the monitor says no vga/dvi input. There is also none of the preverable beeps that are supposed to be there so in short (well long)the motherboard is fried? So do I use it as a planter in the yard or is there a way to get it up and running. It runs on XP media center it has a micro ATX form factor motherboard it is also an AMD 64 Anthlon. ram is 256 mb 1Rx16 pc 4200 ddr2 533 mhz. With all that said can I just replace the motherboard and reinstall the reinstallation disks and be up and running? ( if it could only be so easy) What about the cpu. i know many questions here thanks for patients. Please help me. Tina
 

A:compaq presario

does your system have agp or pciex (or even pci) slot free? Is the graphics on board? It sounds like a graphics card problem, even if it is onboard. I'd try a replacement card (even if it's just a pci card) and see what happens...
 

1 more replies
Answer Match 57.12%

How do you access the Bios on a Compac Presario 4110. I keep getting the message 162 Sytems Options not set. 163 Time and Date not set. Having visited Compac they were not a lot of help. Downloading the software recommeded by them was a waste of time, still got the above message. Tried all the usual keystrokes etc no good. Any suggestions would be appreciated.
 

A:Compaq Presario

9 more replies
Answer Match 57.12%

I have purchased a Compaq Presario 600 with an Athlon XP 2200+ processor. I do not have a copy of Windows XP to wipe it with. Is there any way with the installed XP that I can refresh this system and remove data frome previous owners? Or Can I load Win 98?
 

A:Compaq Presario 600 ??

Compaqs usually have a hidden partition with all the factory loaded software on it in an image format. As long as it does and you can figure out how to access it you could probable do that - but you almost likely need the XP Product key and may need to reactivate XP after the recovery. XP can only be install on one machine at a time - so if they are still using it you are out of luck.

Watch the boot up for any recovery messages or take a trip to www.Compaq.com and look up the info for your make/model.
 

1 more replies
Answer Match 57.12%

Hi. Does anyone know if a Compaq Presario SR1150NX does the display system support component video (Y, Pr, Pb) signal output function? Thanks
 

More replies
Answer Match 57.12%

my compaq presario cq57 says system disabled 62359871..plz help. thank you











Solved!
View Solution.

A:compaq presario

@sharp66? Enter   73031277

3 more replies
Answer Match 56.7%
Answer Match 56.7%

I have the best luck with computers ever. My brother wanted me to format his oldschool compaq presario 5000 computer so I formatted with the win XP setup disk, when I went to restart to start installing windows after the format it takes me to a blank screen that reads:
"Couldn't open drive multi(0)disk(0)rdisk(0)partition(1) NTLDR: couldn't open drive multi(0)disk(0)rdisk(0)partition(1)"

I have booted with floppy and fdisk, fdisk /mbr, formatted about a million times using FAT and NTFS file systems, I have deleted all partitions, did everythinig I can think of.

Does anyone have any idea of how I might solve this and install windows? I know the HDD isn't shot because I can put it in my other comp and actually do a full win install, but when I place it back in the compaq, it brings me to the same error screen.

Any help would be greatly appreciated. Thanks guys.

one more thing, I am kinda a n00b at this sorta stuff so any ideas please give me the *hold my hand* explination and guide me what to do with step by step instructions, thanks again guys!

A:Compaq Presario problems PLZ HELP!

Check in your BIOS and make sure you have the right HDD displayed. It would be best to set it to auto. Also you could try setting the BIOS back to the default values.

3 more replies
Answer Match 56.7%

I really don't know that much about computer but i have a compaq presario v6000 and i just brought a new hard disk drive ST9100824AS and i trying to put on windows 7 and its saying no IDE found when i run diagnosis test. When i go to run the windows 7 disk i get to the installing screen and its doesn't find hdd. I need some help. Thanks

-MaxG

More replies
Answer Match 56.7%

Installed with Vista Premium, i've realised that it has a Recovery Partition and im not sure how to use it. my computer came with a windows vista disc, but im trying to recover Vista and im not sure how to do it. maybe someone can give me a heads up on how to do it.
 

More replies
Answer Match 56.7%

I have a compaq presario c300 notbook. It will not boot. I get the compaq screen, then nothing. It will not boot to the cd either. The backlight comes on, so it's not that. Please help. I'm lost.

A:compaq presario c300

Welcome to TSF....

To get it to boot from the cd you have to change the boot order in BIOS. This can be done during boot up when you can open the BIOS and set it.

The cd you used is it the recovery cd for the computer?

1 more replies
Answer Match 56.7%

Hello! I am attempting to change a 80mm fan in my Compaq computer. The fan I want to change is, I believe, called the CPU fan. It has a lever next to it and 4 screws holding it down. My question is this: Do I have to move the lever on the side of the fan in order to pull the fan up and proceed to remove the screws or do I just remove the 4 screws?  Also, how do I remove the screws considering the awkward position they are in? (I've been working on trying to remove the screws; however, it is difficult to maneuver the screwdriver into the top of the screws to remove them. This is because part of the fan case is above the screws making it necessary to place the screwdriver sideways in order to remove the screws.) Thank you for your response.  

More replies
Answer Match 56.7%

the DVD drive stopped working and now the hard drive has errors.

I got an external USB DVD drive on it, but chkdsk cannot seem to repair the hard drive.

Anyone got any idea how to fix it or recover data off of the hard drive. I got a year's worth of work on it, and none of my files show up. Just "File record segment XXXXX is unreadable" errors about a million of them.
 

A:Compaq Presario 2500

Suggest you stop using the drive until you can recover the data.
It is likely that drive has failed or is going into total failure.
You can purchase a replacement drive for $42 to $75 depending on size and whether you get the 5400 rpm or the 7200 rpm in a 40, 60, or 80 GB model.
You can obtain an adapter to put the drive into a desktop unit as a slave. The adapter converts the mobile 2.5" hard drive by adapting the pin set for the desktop EIDE cable. Adapters are available many places, including www.geeks.com, www.cyberguys.com, www.frys.com, www.outpost.com, and others... cheaply at $2.45 to $9.99 depending on where you get one.
Then you can usually drag and drop the data from the mobile drive to a desktop drive, or use drive recovery software, then you can burn a CD to then migrate it to your new drive... or just use a USB transfer.
( We work on a great number of the Presario 2500's with identical problems. Did you know there are 434 different models of the Presario 2500 series of laptops?)
With the new drive, you just use the recovery set that came with your laptop, or buy the set for about $30, including shipping, from the Compaq parts department.
But you likely will not ever be able to use that drive again. Thus, you do not want to stress it further by more restart or rescue attempts.
 

4 more replies
Answer Match 56.7%

I bought this compaq presario 1800T from a garage sale and when I first turned it on it took at least 30min. for it to completely boot up and run fine. Cna some tell what to do for it to run faster. Also it has no memory chip and it runs on xp and was designed for ME or 2000.
Im also trying to get internet on it.
Please Help!
 

A:Need Help with compaq presario 1800T

how can it run with no memory? You will at least 1 gb of ram to run XP well. 512mb at the minimum to be acceptable.
Read the upgrading/troubleshooting ram guide in the guides forum before installing ram.

read the speeding up computers/system guide in the guides forum to see how to speed up your system. It is old, so bear in mind it really is only good for office work.

It has a built in telephone modem port and a LAN port for internet.
If you want to go WIFI (wireless) you need to buy a WIFI card for it.
 

1 more replies
Answer Match 56.7%

i just did a fresh install on this compaq laptop w/ win2k pro and i lost several of the add on thingys that compaq added to the laptop.

ie. the volume and scroll options on the keyboard. i went to the compaq site and haven't found the documentation on what the name of the programs or drivers are called for these 2 options.

any help would be nice.
thanks
 

A:Compaq presario 1694 w/ 2k pro

You should have gotten a Restore CD with your laptop. That is the OS and all specific drivers, apps and Compaq features that were on the system. Anytime you install a "fresh" OS, you will lose all that stuff. With Compaq, I think this is not all bad. If you bought the laptop with something other that Win2K, then you are most likely SOL and on your own.
 

1 more replies
Answer Match 56.7%

Related to the problem that I posted about here: http://www.techspot.com/vb/topic141683.html, this is a little more urgent. The Compaq will frequently, sometimes regularly lock up: screen freezes, neither mousepad nor keyboard respond, and the harddisk parks the heads. Lately, it locks up when it's on the charger, and then is fine (at least, so it seems) when on battery-power. It's also sensitive to being touched--not bumped, it's that unpredictable. Sometimes, I can move it around without problem, other times, if I even touch it, it freezes.

The fans still run like normal, so I don't think that it's overheating. I'm afraid it's a motherboard issue, which I wouldn't be surprised at, considering that it's about 6 years old.

Any suggestions would be much appreciated.
 

More replies
Answer Match 56.7%

Hey all,
Does anybody know if all of the motherboards in the Presario V6000 laptop series are the same size and shape?

More specifically, does anybody know if a V6000 motherboard would fit in a V6310 case?

If you need more info, let me know.

Thanks!
 

More replies
Answer Match 56.7%

System simply freezes. Compaq Presario 5000, running XP. Latest Windows updates already applied. Any ideas???
 

A:Compaq Presario won't go into Standby

6 more replies
Answer Match 56.7%

My sister is having major problems with her Compaq Presario CQ57 (running Windows 7). I have been trying to help her with it but, I am about to literally throw it from a very high window. I'm thinking it has a malicious program lerking inside it. I am trying to get it into safe mode and am having a hell of a time. I want to do a scan on it and I believe it is better to be i safe mode.

There is no F8 option so that is out. I tried msconfig and computer says it can't find the file,(by the way it says that to any program I try to install). Since I can't get anything to install and everything I seem to try hits a brick wall I am at a lost on what to do. Every time someone gives me some advice on how to maybe fix this I can't seem to get past the first step!!!HELP!!!! She has only had the computer for a couple of months. This is her first brand new computer and it seems she has made a very bad choice!

The Wireless has already quit working too! Buyer Beware!!! Please can someone please help me out?? I am desperate.

A:Compaq Presario CQ57

How about booting to recovery partition if available to restore to factory condition or system restore?

2 more replies
Answer Match 56.7%

Recently took some hits on my Compaq Presario 7478 system. Got two or three nasties via the 'Net. After McAfee's virus scan and removal, began experiencing weird happenings, such as system closing down and restarting. Then just not starting. Tried a few remedies [probably inadvisedly], and finally the system seemed to hang on my restore at the same place repeatedly.
Ultimately the system could no longer establish my OS. Restore failed.
Bottom line: Could not invoke computer restore. Could do nothing with this computer.
Q... Being compaq is the BIOS set to a certain condition that would prevent my reformatting the hard drive and restablishing an OS? Is this an option I can override? If I were to piggy-back the existing hard drive onto an operating hard-drive and reformat would that solve this problem and permit me to then create or repair the hard drive subsequently to get my compaq back?
Sorry this is so wordy...
 

A:Compaq Presario dead

Have you tried disabling System Restore; then re-enable for a fresh start?

Failing that, format and install OS per instructions in your manual or the CD which came with your computer. If no CD, the OS should be installed in .cab files in Windows Explorer.

The BIOS should already be properly set
 

3 more replies
Answer Match 56.7%

My laptop wants an administrator password that I don't know. Shows a system disabled code of 91550023. What do I do?

More replies
Answer Match 56.7%

computer will not charge only when it wants to. will not start up the power charge and wireless lights come on and the hdd light does not. black screen and the fan does work. computer was shut down and charged over night the next day it would not start up and screen is black.

A:compaq presario cq60

Without the battery installed and the power adapter plugged in, press and hold down the power button for 10 seconds. Plug in the adapter leave the battery out, does the laptop power up?

Do you get any repeated beeps? Does any fans spin or can you hear any fans running?

2 more replies
Answer Match 56.7%

I have kali linux live on usb and wanna load it i used windowsimager32 to make it work on my ither laptop but jt wont work on this one

More replies
Answer Match 56.7%

hello recently my pc has been failing to start up and asking to go to the start up repair my pc is fine but will this lead to future problems

thanks ~shadow

A:compaq presario cq60 help

Hi and Welcome to TSF!

What did startup repair find?

Do you have your Windows cd?

2 more replies
Answer Match 56.7%

Hi Everyone, I am new to this site and really need your help. I have a compaq presario desktop sr1725an and I need to run a complete recovery on the system. I have tried everything the hp site tells me, but so far nothing works. I really need recovery discs for this computer, it currently has xp loaded. Does anyone know where I can download recovery disks for this computer, I want to restore it to its factory settings.

Please, any help would be great.

Thanks!
 

A:Compaq presario sr1725an

7 more replies
Answer Match 56.7%

will not boot to windows- tried to reinstall xp will not boot to xp cd-continually goes back to screen saying last known config, boot normally or safe mode help please
 

A:compaq presario keeps rebooting in xp

7 more replies
Answer Match 56.7%

I'm trying to reformat my mom's old Compaq Presario SR1303WM. I've set it to boot from the cd-rom and I almost had it. But after deleting the partitions and starting a clean install it would only load the programs to 20%. After that it locked up and wouldn't do anything. I had to shut down and restart.

Now, it won't load from anything. Of course the old OS is gone so it won't start up on the hard drive and it won't boot from the cd. It just keeps going to a black screen with "Error Loading Operating System". Can someone please help me. I know they can't get a new computer and I just want to get a new install on this one to speed it up for them. They had a ton of malware and such on it.

Any help greatly appreciated.
 

A:Compaq Presario won't reformat

Since HP now owns Compaq, I am not sure what kind of cds you have in order to attempt recovery.
Per HP Support




HP computers that ship with Microsoft Windows XP do not come with recovery CDs. Instead, they use a hidden space (partition) on the hard drive to store the recovery information. The use of a separate partition provides a convenient process that eliminates the use of recovery discs that may be lost or scratched. A system recovery from the hard drive may not be possible in some circumstances. Your computer may contain Recovery Disc Creation software. Recovery discs for Windows XP are available from HP for a minimal cost. See Obtaining Recovery Discs for ordering information.Click to expand...

What kind of disk are you using to attempt restore, and are you using HP's support page?
Are you still set to boot from CD and to attempt to do so FIRST?
Is your BIOS properly identifying your hard drive?
What happens if you unplug the data cable from the hd before trying to boot to cd?
Do you have the "Recovery Console" option at some point during boot?
 

4 more replies
Answer Match 56.7%

Hi, i'm having a problem turning on my laptop. I'm using a Compaq Presario C502US. I've been using the AC adapter that came with the laptop but eventually the AC adapter became loose and broke. The charging icon (lightning symbol) wouldn't turn on anymore and I think the laptop has now run out of power. I've finally received a new adapter and when i plug it in the charging icon lights up. However the laptop still won't turn on. I've waited for about 2 hours but it still won't turn on. When i click the power button, the Power turns on and then it blinks. The Fan turns on for about 3 seconds but then it goes off and the power light blinks and the monitor won't turn on. Can anyone help me with this problem?
 

A:Compaq Presario won't turn on

Remove battery and power adaptor (ie all power out)

Hold down the ON button (to disperse all internal power)
Plug the power adaptor back in only (and to wall socket!)
Turn on!

If it works, turn back off, and re-install battery, turn On
 

5 more replies
Answer Match 56.7%

Hi All

I realise this is possibly not the right room for this, but here goes.

Compaq presario V5000 laptop started giving consistant BSOD on start up, no boot (even safemode possible)

*** STOP 0x000000c2 (0x00000043, 0xDFFE8000, 0x00000000, 0x00000000)

Ran linux did memory and hard drive check, seems ok. Have got all my data off and trying to recover the computer to a working state, but turns out the Compaq recovery DVDs i made invoke windows XP, this of course brings on the blue screen of im at the end of my tether.

Any suggestions, as I havn't got a scratch startable version of windows (as they don't give away them anymore.)


Thanks in advance.

A:Compaq presario recovery

Hi.
ok why can you use your restore cd to boot the the laptop with pressing F11 when booting the laptop,then follow the instruction.

N.B
i also have problem with mind i can not used it anymore because i have accident i lost my restore cd for compaq presario v5000.
can you please copy and send them via my e-mail,[email protected]
if you done mined.

1 more replies
Answer Match 56.7%

ok the dilemma is simple ok i bought this new laptop for the wife then it came with a built in webcam truth is i don't want that webcam so i bought another webcam that i am trying to use on msn but the laptop states found new hardware but doesn't install my webcam is usb ported it says m style on the cam the only thing it uses my wife states that she can access the cam thru the control panel but not in msn why is this occuring if someone could get to me asap would be greatly appreciated thanks in advance
 

A:Ok new laptop compaq presario

You may need to disable the original webcam

You can disable it by going to: Device Manager (Start->Run-> Devmgmt.msc)

Then locating your Webcam (that you don't want to use) and then right click on it and select disable

Then go back to MSN and use the settings to set up the new webcam
 

1 more replies
Answer Match 56.7%

I replaced my LCD cable (with two different cables) from the the stock one because it wouldnt fully display if not pushed all the way back. When I replaced the cable I put it all back together and it comes on without the previous problem but now it displays 4 identical screens like. 1 23 4I have tried updating the drivers for the video chooser and have even loaded previous drivers but to no avail still 4 screens. Can anyone help me out?

More replies
Answer Match 56.7%

hi,

Iam siva.I need all the drivers of compaq presario c770us because some of the drivers are not functioning properly it has become a serious problem for me for many days.I will be vey grateful if you suggest me a positive reply.Thank you.
 

A:compaq presario drivers

10 more replies
Answer Match 56.7%

I have this old Compaq and I used to be able to burn CD's until the day I stuck in my little portable device one would use to store pictures and things..I forget what its called,but you can insert it into a USB port then add or remove pics or anything and remove it and put it back around your neck and go. Anyway after doing this one day I go to burn a Cd and my computer is telling me I have these new drives called E,F,G, & H, which it has now bundled into something called a USB mass storage device. it no longer recognizes that i have a working burner.. it does not even recognize that I have a drive D. All it is reading is those removable device drives that came along with my junk drive. The 'Safely Remove Hardware" option has been coming up and ive used it to disable these other drives..but its still not working..How can I fix this?

A:compaq presario SR1103WM

Right-Click on My Computer, select Manage. In the left pane there should be a listing for Disk Management - click that.

Now, in the right pane, scroll down and see if your CD is listed, but has no drive letter. If so, right click on the grey part and choose "assign letter". I would use Z: (no chance of a USB device trying to grab that letter).

3 more replies
Answer Match 56.7%

Hello Everyone,

I am running Windows XP Pro on a HP Compaq Presario S3190UK desktop and since this evening I haven't been able to even get to the Windows Splash screen.

When I boot I am given the options of Safe Mode, Last Known Good Configuration, Start Windows Normally and Recovery Mode (which doesn't respond). Whichever option I select it stalls and will not boot the files and when I boot in safe mode it stalls after about seven seconds.

I have the Operating CD which I have tried to boot from but upon boot up I get the message "Please insert the Restore Plus! CD" . I don't have this.

Is there any chance of me retrieving my data?

Thanks for your help in advance.
 

A:Restore Plus! CD for HP Compaq Presario

16 more replies
Answer Match 56.7%

Here we go again, guess I am good at getting stuck on stupid, we bought five of these HP 'debranded' machines. I have a M2NBP-VM CSM mobo. I have almost everything working except the audio. Two errors in device manager PCI device and unknown device. I am suspecting that it has to do with audio since I can't get any audio going period. Yepper done the aau high def audio driver thing, chatted with HP support etc etc ran driver issues into the ground. I am using xp pro sp3, I know these things shipped with MCE and they say there vista ready.....hmmm but no xp drivers. So any of ya'all got some advice? thanx
 

More replies