Tech Problem Aggregator

Vista driver for Canon printer is not created

Q: Vista driver for Canon printer is not created

Hello! I would like to know if Vista can maintain Canon Printer. During the installation the error massage was appeared. Canon cannot create an adequate driver for Vista. What should I do to run my printer or it is impossible?
Thank you in advance!!!

A: Vista driver for Canon printer is not created

whats the exact model of the printer ?

4 more replies
Answer Match 82.74%

I just purchased a new Vista Home version computer. I started downloading old software/updates/etc. I have a Canon imageClass D680 multifunction printer/copier [Canon PC1200 /iC d600/iR1200G] with the original CD but it is not compatible with Vista.

I went to CanonUSA website and downloaded their Vista version of the driver. NOTE: I have done this numerous times and saved it to several different locations [Program file folder in both Vista and one I created in my user "Program" folder] because Vista notified me that I did not have Administrator authorization - I got on line and learned how to disable the user limitation so I could have Administrator rights.

I have restarted my computer in both my personal user account and Administrator account over a dozen time in order to bring up the new hardware notification window and driver wizard. Since the cd version did not work, it prompts me to browse, I click on the corresponding folder, and then I get the same message EVERY time . . .

[paraphrased] "windows cannot locate the driver for the hardware, contact the manufacturer to get the driver."

You guys out there are more tech savvy then me - please help. I do not want to trash this printer/copier - it works great (it worked fine with my old XP machine just a week or two ago).

Is Vista that bad? (All my Canon printers and cameras have been great).
 

A:Vista does not recognize Canon printer driver

6 more replies
Answer Match 80.22%

Last week I had to replace my old computer which used XP SP2. The new system uses Vista Home Premium and I'm unable to get my Canon MultiPass F60 printer to print. I've tried an Internet search for a driver and I've tried to add a printer through the Control Panel. My current printer isn't listed under the Canon products.

Can anyone direct me to a download that will resolve this issue or tell me which Canon product under Add a Printer will work for mine? Any help will be appreciated.

Gawain
 

A:Driver for Canon MPF60 Printer, WIndows Vista Home Premium

I've looked everywhere for you and can't find a trace of evidence that a Vista compatible driver exists for the MPF60.

Sorry
 

2 more replies
Answer Match 72.66%

Canon do not support their BJ30 printer on a Windows 7 64 bit OS, and do not supply drivers. Does anyone know how I can use this printer on this OS, by perhaps using similar drivers etc? Thanks.
 

A:Printer Driver needed for Canon BJ30 printer on a Windows 7 64bit OS

on another forum, someone has managed to use the BJC-85 printer drivers to work with windows 7 - doesn't
say if 32 or 64bit windows 7 though

also have read here
http://forums.techguy.org/windows-7/990380-windows-7-64-bit-bj.html
 

1 more replies
Answer Match 70.56%

Hello))

I need help..please ))
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..

advice please..??

A:Window 7 64 bit cannot install driver sotware(canon printer driver)

Hi did you try a system restore to a point when it did work.

2 more replies
Answer Match 68.88%

I have a Canon BJC 4400 bubble jet printer that was given to me. I downloaded a driver for it (version 3.97) but when I try to install the driver a window comes up entitled "Extraction Progress" and extraction completes and then a window comes up saying "Canon Information", "all items were successfully extracted." I click OK and the next window that comes up is entitled "Readme-Notepad" in which information about things such as installation but when I close that window nothing else happens, it goes back to my desktop. I'm using Windows Me. I downloaded a driver for the same printer for my laptop which has Windows XP and it installs without any problem. All steps for adding a printer were followed. Version3.97 is for Windows 3.1, 95, 98, and Me. Any help would be appreciated.
 

A:canon bjc printer driver

is it just extracted into a temp file and then waiting for you to install
post the link to the driver page and I will have a look
 

1 more replies
Answer Match 68.04%

I bought this printer for a buck at a garage sale. They claimed it worked, but had no ink. I paid around twelve dollars for the ink cartridges on ebay, but forgot to check first to see if Canon had a driver for xp. They don't. However, when I go to microsoft's printer support page, I find that printer listed as one that there are drivers for in xp. http://support.microsoft.com/?kbid=293360

The question is--should I assume Microsoft is correct, or assume that my printer won't work and just get rid of it?

Shane
 

A:Question on driver for Canon printer (BJC-620)

I would go with the Win98 drivers they have listed on Canon's website. If microsoft has drivers for XP, try them first. The worst that can happen is that it won't work.
 

2 more replies
Answer Match 68.04%

Is there any way to install printer driver (i have canon mp250 and i have its cd driver) without having the printer around?

A:Canon printer driver installation

Hi,

This tutorial might help: http://www.ehow.com/how_5925020_install-printer-driver-printer-connected.html

4 more replies
Answer Match 68.04%

Recently purchased a new laptop. During installation of above printer I received a message that I should contact Microsoft for a new scanner driver for the printer. Have looked everywhere on Microsoft website without any luck in finding a driver for Windows Vista Home Basic operating system.

Can you help?

Thanks
Judy
 

A:Canon Pixma MP 150 Printer Driver

Here is the correct web page for printer driver download
http://software.canon-europe.com/products/0010247.asp

If you have any problems with regards to conflicts etc just come back to this same thread and most folk will be able to assist further.
 

1 more replies
Answer Match 68.04%

Hi all, I'm currently having the Canon ip1600 printer and is unable to detect the printer (using Windows xp os). I manged to find a driver on Canon website, but when it comes to the installation part where they state that I'm supposed to plug in my printer and on it so that It can detect the port, it doesn't and it just stuck at the screen. I tired restarting com, offing and on the printer again, but everything won't works. Any help will be greatly appreciated. Thanks!
 

A:Canon Ip1600 Printer Driver

You appear to have a Canon PIXMA iP1600 printer.

Here is the Email support site for it.

Here is the phone support site for it.

-------------------------------------------------------
 

1 more replies
Answer Match 68.04%

my printer driver has somewhta been deleted of my computer and i need another one. Plz someone tell me where i can downloads a working windows xp driver for canon 5100 series printer.

thanks
 

A:BJC canon 5100 printer driver

7 more replies
Answer Match 68.04%

I have a Canon i9100 printer which worked great through XP, Vista and Win 7....Canon provided updated drivers.. However, for 8.1, Canon does not provide a driver for this printer. Is there another source which makes a generic driver for this printer so it does not become obsolete?
 

A:Solved: Canon Printer Driver For 8.1

The below image shows the list of compatible Windows versions for the Canon i9100 printer.

Unless Windows 8.1 provides a built-in generic driver for it, you're probably out of luck.
 

1 more replies
Answer Match 68.04%

Hello,

I'm new in this forum and like to ask, if someone have a solution for my driver problem.
I've got an old Canon S520 printer and i am not able to install any driver on my Windows 7 64bit.
I searched the inet for a solution, but can't find one.
And sorry, if my English isnt't that good.

Thanking you in advance.

A:Canon S520 printer driver

Support - Color Bubble Jet Printer - S520 - Canon USA Consumer Products

Use the Vista driver.

5 more replies
Answer Match 68.04%

I just upgraded my home network to a wireless system. I'm running XP Pro on the computer hardwired to the Canon Multipass F50. My laptop is running XP Home and networked via wireless. All aspects of the network operate perfectly, file sharing, internet access, etc. The add printer function allows me to find the canon over the network, I have the driver installed (because I've been using the printer in a networked (shared) mode prior to going with the wireless router. Now when I attempt to print I get an error message that states: "Failed to open printer" Canon's website simply states that there are no drivers for XP to allow for sharing this printer.

Wonderful!! Anyone have a workaround? It used to share until I went wireless.
Dan.
 

A:XP printer driver for canon multipass f50

It almost sounds like there's a permission problem with using the printer with the laptop. Try going to the printer properties on the machine that the printer's connected to. Go to the Security tab and make sure that your laptop login computer name is there and all of the permissions in the ACL list are checked. You could also try going to Network Neighborhood, go to the computer that has the printer connected and try to connect to the printer through there.
 

1 more replies
Answer Match 67.2%

I was working on getting the Canon ImageClass 4150 machine to work on a machine with Vista installed. I downloaded the new driver and upon trying to install the installer informed me that I needed to uninstall the previous instances of "MF Drivers" in order to reinstall.

I ran a utility included in the setup zip file that is supposed to remove previous Canon drivers in the 4100 series. I removed it from Add/Remove programs and also in the Device Manager. I've searched the computer (including hidden files, etc) and can't find any previous instances of the driver. Can't figure out what else I need to install.. Any help please?

A:Reinstalling printer driver for Canon ImageClass4150

http://support-au.canon.com.au/contents/AU/EN/8200334500.html

http://canoncanada.custhelp.com/app/answers/detail/a_id/4073/~/uninstalling-and-reinstalling-the-printer-driver

MF refers to the model group...ignore the fact that the second link refers to Win 7. Both links are provided as just info to consider.

Louis

2 more replies
Answer Match 67.2%

Hi All
Does anyone know where I can get a driver for the above printer that works on Windows 7 or is there a driver from another printer that can be used?
Many thanks
djb

A:Driver needed for Canon LBP2900 printer

to get my lbp2900 printer working i used the following workaround
- Installed virtualbox (maybe this is also possible in virtualpc)
- started a virtual winxp image
- virtualbox has a remote usb-bridge to connect to usb-devices not recognised by the host-system, configure the bridge to the printer
- install lbp2900 driver

To print from office/photoshop without installing those in the virtual image, on the host system print to pdf (pdfcreator) and print the pdf in the virtual image.

however i still hope canon releases their x64 lbp2900 driver soon!

9 more replies
Answer Match 67.2%

I have Windows Vista SP2 32bit. Bought a new printer on the weekend but haven't been able to download the scanner driver. The printer works fine except when I click on the scanner button from the Canon software it says something like "no scanner driver is installed for this software". I've talked to Canon but after 3-4 hours of trying, they say that it's the OS and not the CD software. Something to do with USB port conflict. Any help would be appreciated. Thanks Gord

A:Canon MP480 printer driver won't install

here is a couple of links for the driver and software.

https://www.microsoft.com/windows/co...=all&os=64-bit - try this one first

Canon PIXMA MP480 Printer Drivers v 1.00 - TechSpot Drivers

? Download Canon PIXMA MP480 Printer Drivers v 1.00

14 more replies
Answer Match 67.2%

Win 7 doesn't support the Canon BJC-4000 ink jet printer. Any other drivers that will work? I love this printer!

Thanks!

A:BCJ - 4000 Canon printer driver needed

Hi,
Double check the # on it cause it's not in the directory. It must be different since it doesn't pull up on my website I am checking.

4 more replies
Answer Match 67.2%

I have an Asus printer with a Windows 7 upgrade and a Canon MF4140 printer. I am trying to upgrade the printer driver to a Win 7 version. I have dowloaded the new driver from Canon and upzipped it as requested. I have removed my original HP driver from the devices and printers area, and then ran the setup file from the new driver. My problem is that  a window pops up stating:"An older version of MF Drivers exists in this computer.Uninstall the older version of MF Drivers, and then try to install again"I cannot see any other printer drivers on my system, can any advise as to where thay might be and how I get rid of them?Thanks

More replies
Answer Match 67.2%

W8 Release Preview 64 bit found my USB connected Canon Pixma iP5000 printer, but didn't install a driver. WU says there is an update available, but that will not install. Error is WindowsUpdate_80070BC8, which doesn't help much. I haven't been able to find a 64 bit driver on any of the Canon sites, but I have found an XP 64 driver, on another site.

Checking properties for this printer in Devices & Printers throws up the following event:?
Driver Management concluded the process to install driver prnca00m.inf_amd64_26559657092dd606\prnca00m.inf for Device Instance ID USBPRINT\CANONIP5000\7&8F48641&3&USB005 with the following status: 0xBC8.

This status code is listed as ERROR_CORE_DRIVER_PACKAGE_NOT_FOUND

Attempting to update the driver from the printer properties finds a couple of drivers, but they also fail to find a core driver package. Add printer wizard finds a compatible driver on my machine, but that also fails for the same reason.

This printer is installed OK on my W7 installation on the same machine.

The 64 bit XP driver installed OK on this W8 RP installation, and printed a file OK, but attempting to upgrade results in the same error. After installing this XP driver, WU reported that the update installed, but Update History shows 'Failed'. Now WU isn't offering the update.

TIA for any help.

A:Driver for Canon Pixma iP5000 printer

Does anyone know where I can get a W8 32bit driver for my Canon Pixma iP5000 printer? Canon just wash their hands of any responsibility.

2 more replies
Answer Match 67.2%

I have Canon S900 inkjet installed on an XP PC on my win 7 homegroup. Works fine from the XP PC. The Win 7 PC sees the S900 and asks for driver. Downloaded Canon aomwin110ea23us.exe which extracts something somewhere. Cannot locate ANY .inf file on the PC. Win 7 still wants the .inf file to install the printer. Know this is a bit 'unusual' but any help would be appreciated. Thanks, Joe

A:Canon S900 printer driver installation on Win 7

You should read this other thread I posted last week.

That other thread described my issues trying to get the x86 drivers for a Canon S800 installed as the second driver on an x64 Win7 machine. The S800 was USB-connected to the Win7 machine and was supported out-of-the-box by Win7. However the required x86 drivers were seemingly unavailable from Canon.

I was trying to add the x86 drivers as a second driver for the printer on x64 Win7 so that the x86 WinXP machine (which was also on the home LAN) could print on the S800 hosted by the x64 Win7 machine.

After quite a struggle, I solved the problem. It actually involved THREE separate driver(INF) files and folders. Two of them were on the Win7 installation DVDs, but the third one (which was the primary starting point) apparently didn't make it to Microsoft in time for the Win7 installation DVD production. so this crucial first of three drivers was only available from the Microsoft Updates Catalog site.

So the three needed x86 versions of the three x64 drivers that had been automatically installed in x64 Win7 were my target. Again, two of them were on the 32-bit x86 Win7 installation DVD (just as they were on the 64-bit x64 Win7 installation DVD). But again, the primary first driver was not. And that's what I got from the Microsoft Updates Catalog site.

I then used a program named WinMount to extract the two other x86 drivers from the 32-bit Win7 installation DVD which I had a copy of.
I suggest that you start by de... Read more

8 more replies
Answer Match 67.2%

I tried to install a used Canon BJC-6000 printer on a PC running XP Pro. Went to Canon's support site and downloaded the driver. Tried two different IEEE cables (Both Good), the
PC still does not recongize the Canon printer. Does anyone have a site that has a good
driver to correct the problem? The settings has defined the printer as: BJC-6000 BJRSTR

Thanks for your help in Advance.
 

A:Need correct driver for a Canon BJC-6000 printer on XP Pro

9 more replies
Answer Match 67.2%

I have a Canon MP190 printer. I was having issues with weird messages every time I tried to print something. I figured I may need a driver update. So I went to Canon's site and downloaded the latest driver for my printer. I deleted the prior driver per instructions. The current driver just won't install. I followed the directions, but it fails to either find or install the updated driver.

I get a pop-up telling me Windows is searching Windows update for the driver. Problem here is the driver I downloaded from Canon has nothing to do with Windows update. I have Windows update shut off. So it is looking for the driver in the wrong place.

I tried to manually picking the driver out of various places on my computer, but I don't see it?
When I type MP190 in the start search box I find/see the downloaded driver location. If I double-click it-it unzips the WinZip Self-Extractor download. Then I get a welcome to the MP drivers setup program, I disconnect the printer cable from my laptop, and exited all running programs as asked.

Next I choose my place of residence--USA. Click next, accept license agreement, installs drivers. Click complete, confirm printer cable is plugged into computer, turn on printer. I get a pop-up telling me Windows needs to install driver software for your MP190 printer. Then I click "Locate and install driver software (recommended)" It starts to install and the driver icon spins like it is installing, but then fails to install.

Question is how... Read more

A:Canon MP190 printer driver won't install?

Why do you have Windows Update turned off? It may be that the driver requires updated files to install.

29 more replies
Answer Match 67.2%

I have an older Canon imageclass d761 printer.

There are no 'official' x64 bit drivers on the Canon page.

Is there any way to use this printer with Win7x64?

A generic printer driver, or another model that is close?

My other printer, a MX850, works fine (Canon had x64bit driver)..

A:Canon x64 Win7 printer driver for d761

If your computer supports virtualization, use Windows XP mode. Even though my machine runs Windows 7 64-bit, XP mode is a 32-bit "machine" which is compatible with the printer.

I called Canon and was told to Google it. Nice support!

Anyway, printing works fine. I haven't figured out scanning yet, but hopefully will soon...

Hope this helps!

4 more replies
Answer Match 67.2%

Hi all,

OK ... for a few days (maybe a week) now I have had trouble with my Canon MX870 Printer/Fax. I have been using it successfully for the past 16 months now, via USB connection, installed on both my Windows 7 laptop and my Windows XP PC (I just unplug it and plug it in to whichever computer I need to print from).

For some reason, it has decided not to recognise the drivers on my laptop. I have tried to uninstall and reinstall (no go). I also deleted every instance of MX870 from the registry that it would allow me to (some it wouldn't for some reason - no access - yes I am Administrator). Reinstall again ...still no go.

The Windows 7 Updates were failing to update the Fax component which I thought was the problem, then all of a sudden it was successful ... still no printer. Now, it is unsuccessful again.

But ... I don't use the Fax component ... never have ... with no problems for 16 months.

The reinstall from the CD is successful, but when I plug in the printer, it fails. "Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed.

CanonMX870 series ... Ready to use (with a green tick) ...
CanonMX870 series FAX ... Failed (with a red cross).

Oh, BTW, the scanner component works fine.

Also, each time I unplug then plugin the USB cable, it attempts to reinstall the device drivers, the printer successful, the fax failing. It never did this before when I was happil... Read more

A:Canon MX870 Printer - Driver Issues

Thats a long story. You might of already did this. Start and go to devices and printers. Make sure the printer has a check mark in it. That will make it your default printer. With the printer hooked up to your computer and powered up reboot your computer. Lets see if Windows 7 will pick it up or sometimes it will ask if you want to install the driver. Windows 7 comes with a lot of drivers built in.

7 more replies
Answer Match 66.78%

I bought a new laptop and it came with Windows 7 Premium. I have a Canon Pixma ip3000 printer. I have looked everywhere.
My printer is not listed. I tried the trick of choosing USB virtual port and then searching for the latest printers. It still wasn't there.

I have the install disk, does not work.

Help!!!

A:Can not find printer driver - Canon Pixma iP3000

  
Quote: Originally Posted by CoCoSD


I bought a new laptop and it came with Windows 7 Premium. I have a Canon Pixma ip3000 printer. I have looked everywhere.
My printer is not listed. I tried the trick of choosing USB virtual port and then searching for the latest printers. It still wasn't there.

I have the install disk, does not work.

Help!!!


Hello CoCoSD,

Did you try to download the driver from Canon website?
Photo Inkjet Printers - Photo Inkjet Printers - PIXMA Pro Professional Inkjet Printers - PIXMA Corporate and Graphic Arts Printers - Photo Fun Projects - Photo Printer - PIXMA iP3000 - Canon USA Consumer Products

Select your OS and it should work.

I have a Canon iP PIXMA 1500, and it works perfect with downloaded drivers.

Best regards,

zx81

9 more replies
Answer Match 66.78%

Beat my head against the wall so decided to post because I finally have it working.
My setup:
Machine 1: Windows 7 64 bit
Machine 2: Windows Home Server WHS (or in your case any 32 bit Windows OS) with Canon Pixma MP780 printer

Problem:
Can't install 64 bit drivers on machine 2 (under additional drivers) such that machines on the network can connect to this shared printer.
Canon only provides 64 bit drivers for fax and scanner and not printer on their website because the assumption is that a native driver is built into Win7 (64bit), which it is. The problem is that canon on both machines refers to this printer as two different names in the .inf file.

On the 32 bit side, it's called: "Canon MP780 Series Printer"
On the 64 bit native driver (that windows provides), it's called: "Canon Inkjet MP780 Series"

So, when I tried to connect to the network'd printer, it tried to look for it locally, on windows update and times out and fails (looking for the wrong name and therefore a mismatch).

Btw, I tried creating a local port on the 64 bit machine and gave it a UNC path to my WHS which works but after a reboot it doesn't so that's not "non techie" friendly and a pain in the neck.

Here's what I did:
Look for the driver under c:\windows\system32\driverstore\filerepository\<for your printer>.

In my case, for the Pixma MP780, it was : prnca00l.inf_amd64_neutral_4049bfb7d4c077ab

In this folder, the file was: prnca001.inf (setup info... Read more

A:If Canon or printer manufacturer does not provide a 64bit driver

I can't sticky, but I can thank you on behalf of all that read and benefit from your thoughtfulness.

2 more replies
Answer Match 66.78%

Hello))
I need help..please )
A week ago I disconneced my printer cable from the computer.When i connected again the windows searched dor device software for the printer and didnt find.
Driver to the MX 360 PRINTER(which i use) was installed I see it in the programms.
So then I uninstalled the driver and installed again from canon site,when i installed in the insallation process the driver found the printer!.
Then restarted the pc and again windows looked for a driver ans said he cant install. I attach the message here./
I tried this procedure with usa mp driver dor canon and also with europenian.. still computer doesnt reconize the printer..
When i go ro device and printer i see my canon printer with a caution sign on it(a yellow triangle with a "!" )
I downloaded the driver from canon site it was MP driver (the latest)
dont know what to do...
I using win 7 64 bit.
I talked to canon support they said its windows problem.
I tried to press at the printer sign in device and printers and then started the troubleshooter of windows but again its not helped..
 
 
please help =)

A:win 7 x64 cannot insall driver software to my canon mx360 printer

Uninstall ALL software related to Canon, after deleting the printer.
 
Then reinstall everything related to printer anew, following Canon instructions for doing such.
 
Louis

2 more replies
Answer Match 65.94%

I'm trying to add a Canon imageCLASS MF7470 printer to my laptop. When I plug it into the USB, Windows 7 detects it, but as unspecified. It says no driver is installed. When I do a Windows update it comes up with other imageCLASS models but not the one I have. I've tried going thru these threads to locate my options but nothing works. When I go to add printer, properties is as far as I can go cause the only tabs I get there are general and hardware. This is a work printer for a jobsite, so of course the disk has been lost at some point, but I need this running ASAP.

A:Add a Canon printer with no driver and Windows update doesn't work

Here is the driver page for Canon, just specify your OS, download drivers, install and go at it could be that MS just doesn't provide them. However Canon does for both 32 and 64 bit.

Canon imageCLASS MF7470

1 more replies
Answer Match 65.94%

Can't someone help me find a Canon PIXMA ip5000 printer .INF file for Win7 Pro x64 ? The Canon website has an Add-on driver for the Canon PIXMA ip5000 printer, but indicates that Windows Update under Win7 Pro x64 has a driver for the Canon PIXMA ip5000 printer (which it does not). Windows Update has a driver in its list for the ip5300 but none for the ip5000. Help !

A:Can't find a driver for Canon PIXMA ip5000 printer for Win7 Pro x64

Why not try the Canon site?
Canon U.S.A. : Support & Drivers : PIXMA iP5000
However, the statement on that site





Quote:
Printer Driver Add-On Module Ver.1.10 (Windows 7/7 x64)
07/20/11 4.10 MB File Name: aomwin110ea23us.exe

This software is a module that expands the functionality of the printer driver for Canon Inkjet printers. Your printer must be installed via Microsoft Update before you download and use this module. By installing this software, you can use the printer...


seems to rely upon Windows Update having the drivers.
If you can't get them you might try changing the Operating System on the above link to Vista 64-bit. It's a considerably larger file and lo... Read more

1 more replies
Answer Match 65.94%

Just unzipped files from download I got from canon.com started installation, 8 mins left it froze. Wouldn't even bring up task manager or run screen with the windows button and "r". So I did all I could, I powered down. Waited a bit, back on, screen imminent hard drive failure bbck up files immediately press return to con tinge windows setup .put in password, screen print, save, skip Bach up directions, freezes at any attempt

More replies
Answer Match 65.52%

Hello,

This is my first post so hopefully i get all the info to you i need.

I recently started supporting a remote site of 4 vista, 1 xp 2 mac users. They have a networked HPCP1515n printer. Original vista users are fine they can print to it but two new users to this printer cannot get vista to detect the printer.

When I run the network install drivers they get the following: error 1327.Invalid Drive z:\. I have tried the usb install but that fails similiarly too. Vista does not detect the printer but older users who were connected are fine.

I have tried installing from local c:\ all fail. i have tried older versions of the driver all fail.

The users have profiles set up to z:\

Attached is a screen shot of the error

Any ideas?

A:Vista not detecting Canon printer

It looks like the Z drive is not mapped with proper permissions or configured for sharing on the systems where you get the error 1327.Invalid Drive z: .

Have you mapped the Z drive on all networked computers?, checked, and configured Vista permissions to allow changes, created a shared file, configured for printer and file sharing (and if applicable passwords), and run with Admin priviledges? and configured any of the firewalls to allow the traffic (i.e., Norton).?

7 more replies
Answer Match 65.1%

I was curious if I could install a x86 printer/scanner driver on a x64 system?

I had to install the x64 driver through Microsoft Update. When I installed the software that controls the scanner the software says no scanner detected.

The software works fine in XP and I still see driver support in x86 Vista/7.

Since I installed the printer driver through MS update there is no uninstaller. If I wanted to uninstall it, do I go to Device Manager and delete the printer driver from there? How likely would 32-bit drivers work a 64-bit system?

A:Canon MP730 Multi Function x86 x64 printer & scanner driver assistance

You can go to device manager>properties>driver tab>install driver to install it.

As far as using a 32bit driver on a 64bit system I'm pretty sure it won't work.

Have you tried using the Cannon driver installer?
They have a listing under multifunction for the Smartbase Mp730 if this is the one your referring to.

Then again it doesn't say what OS it is for.
My impression of the site is that it first has you install their down-loader which will scan your system and then provide the correct driver.

I would give this a try if you haven't already.
http://www.official-drivers.com/installer/?seed=canon&gclid=CN_3tf2q2KwCFUhjTAodO2DIqw
Fabe

3 more replies
Answer Match 65.1%

Running Win 7 64 bit. Printer: Canon ImageRunner Pro 7110VP.

The most recent driver Canon offers for this printer is from 2005, and Win7 says it's incompatible when I chose the "have disk" option. Is there a way to install a printer as if 7 were running XP?

I have to install it over a network via TCP/IP if that matters.

Please help!

A:Installing older Canon printer, driver is incompatible - make it work?

Right mouse click on the driver and run in Compatibility Mode.

5 more replies
Answer Match 64.68%

Hi

Have been trying to download these drivers from Canon's website for the last 3 hours, but they are freezing at 73% each time! Does anyone know where i can get hold of them elsewhere as i've tried Windows update to no avail.

Thanks

A:Canon MP110 Printer Vista 64 drivers

Hi Splosher,

I set up a temporary FTP direct download for you on this sites server for you. Our site supports the Resume Download feature.

The driver download is the same as the one from this link at Canon:
http://software.canon-europe.com/software/0025900.asp?model=


Here is the FTP download link:
*** LINK REMOVED ***

Just let me know when you finished downloading it so I can remove it.

Hope this helps,
Shawn

3 more replies
Answer Match 64.68%

Hi
I wonder if anyone can help me with this problem, Firstly I have a vista 64 bit system trying to get a bjc 4650 printer to work. I have the printer connected to a parallel port at the back of the pc, vista went ahead and found the new hard ware and installed this and I down loaded the latest drivers for this printer, all works for about 2 days great, then for whatever reason it has stopped working
In Microsoft word any document is loaded for printing, all goes ahead well until I get the little menu saying error printing
I have replaced the printer cable and then the printer cartage and still noting get better for me
Would anyone have any idea how to rectify this so I can get work done?
Thanks again
Steve
 

A:Canon printer wont work in vista

What's the exact wording/code of the error?
 

2 more replies
Answer Match 64.26%

Windows 7, new upgrade from Vista 64, will not recognize my printer, Canon image class D320. The installation disk is for Vista 64. I searched Canon and it is not available there. The printer is older model. I also looked at Driver Whiz & Driver Fetch. They only have drivers for Vista, XP.

ANY RECOMMENDATIONS OF HOW I CAN INSTALL THE PRINTER TO USE IT? I PREFER TO NOT BUY ANOTHER LASER PRINTER. This printer works fine on Vista. Thanks.

Also, I have found that many items do not work with Windows which worked with Vista. I do not even have Word. Microsoft is charging $139 for Word. I have numerous Word documents that I must be able to access. I do not like any of the other text programs that are available, particularly notepad. I presumed that WORD & WORKS would be included with Windows 7. Guess MICROSOFT NEEDS THE MONEY to sell word at $139.

Thanks.
 

A:Windows 7 will not recognize my Canon d320 printer, Vista

6 more replies
Answer Match 63.42%

OK, so I have a 1 yr old Dell XPS M1530 laptop with 32 bit Vista on it. I've been using a Canon Pixma IP3000 for the whole time, but it suddenly stopped working. I called Canon and Dell- Dell says its Canon's problem, and the wonderfully thorough canon guy said it was a usbsys file problem (which he can't fix). He suggested I either (1) browse my vista CD and extract the file, (2) run sfc and the installation disk should fix the offending item, or (3) run a repair install from the installation CD.

1) I tried browsing the CD, but couldn't make heads or tails of it and can't seem to find a "find" command in vista (grrr).

so, I...

2) ran sfc, exported the cbs.log file to the desktop and got the following errors (which look like the same problem):

Cannot repair member file [l:20{10}]"tcpmon.ini" of Microsoft-Windows-Printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2009-05-06 16:24:23, Info CSI 000000fa [SR] Cannot repair member file [l:20{10}]"tcpmon.ini" of Microsoft-Windows-Printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neu... Read more

More replies
Answer Match 63%

It's on the list of supported scanners for VueScan, which works without
requiring there be good Windows drivers installed.
http://www.hamrick.com/

It worked for me on Vista 64. You can try it free before paying for it. If you like it you can decide whether to buy the program or use the money for a new scanner. You don't need a driver for the Lide 30--this program does it all.

A:Canon Lide 30 driver for Vista x64

But I don't feel I should have to pay for a driver for the $80.00 scanner I just purchased a year ago (Yes, I got ripped off)

3 more replies
Answer Match 62.16%

Hi Everyone,
I have bought a Canon digital camera (PowerShot SX10 IS). When I attach it to my laptop and turn it on, I get 'Installing device driver software' message. I then get the found new hardware window with 'Locate and install driver software (recommended)' option. After selecting this, it fails a minute or 2 later with 'Access is denied'.
I have been onto Canon who say the driver is already in Vista so its a microsoft problem.
Microsoft say as my laptop was pre-loaded with Vista then its down to Acer.
Before I have the joy of phoning Acer, I was hoping someone might know how I can sort this.
Thanks in advance, fitzsy
P.S. I have run several different Reg cleaners, no change. Also, I have a Canon printer (don't know if that's relevant!)
 

A:Canon driver on Vista - Access is denied

Sorry, forgot to mention, after my conversation with Canon I successfully attached the Camera to my daughter's laptop (Medion - also running Vista). As soon as I turned the camera on it loaded the driver with no messages coming up that needed a response. Thanks, fitzsy
 

2 more replies
Answer Match 61.74%

Hi All

I am attempting to hook up mu Canon PIXMA MP780 (Printer, Scanner, Fax) but apparently it's not compatible for Vista 32bit.

I had previously been using it with XP.

Is it possible to make it compatible - are there any specific drivers that make it compatible ??

I'm trying to scan some legal documents ASAP to send via email.

Any help greatly appreciated.

many Thanks
Nat

A:Vista Compatible Driver For Canon Pixma Mp780

Driver seems to be available from the Canon site: http://software.canon-europe.com/products/0010139.aspSelect Vista and your language.

11 more replies
Answer Match 61.74%

Hi all,
I Have just bought one Sony vaio laptop included Windows vista 64bit, But now I use Printer canon lbp 1210 So I can not install driver 32bit, anyone can help me to find the driver for windows 64bit. Thank you in advance.
ym/im: levinh05

A:Please help driver canon lbp 1210 for windows vista 64bit

No one help me????

6 more replies
Answer Match 61.74%

I recently uninstalled and reinstalled the software (Multipass Manager 3.01) for my Canon C5500 printer; during the reinstall, I am receiving the following error "Failed to register mpservic.exe to windows NT as domain or service". Can anyone give me any insight on how to make the software register this executable to the service MPSERVICE? I tried to remove all entries for the Canon printer in the registry and reinstalled the software; but I am receiving this same error everytime and the software is uninstallled after the error. Please help!!
 

A:Reinstall of Canon Multipass 3.01 software for Canon C5500 printer

Two things to try: If you have anti-virus software, disable it, uninstall the cannon stuff. Reboot (be sure av is still disabled), and reinstall. Then reenable av, restart for good measure.

Another suggestion from Canon, though not apparently EXACTLY your issue:

http://www.expressresponse.com/cgi-...02877.2509.2&search_erproduct=MultiPASS+C5500

Also, see this document.. it most likely is not related, but..

http://www.expressresponse.com/cgi-...3490.14078.7&search_erproduct=MultiPASS+C5500
 

3 more replies
Answer Match 60.9%

I have a Canon i850 printer which I have immensely enjoyed using these past four+ years. For one thing, I've never had even one paper-jam during that time.

My understanding always has been that it is best to have separate components, so that's why I've always owned a dedicated printer. However, it appears that the present-day trend is more toward all-in-one units. Actually, I'm in the market only for a printer, but if the Canon MP600 all-in-one is technologically advanced far beyond my i850, then I would strongly considering buying one.

The MP600 has a scanner (which I don't need, although it would provide me with a back-up) and it has several modern features of convenience which my i850 doesn't have. What I would especially like to know is whether or not the MP600 produces appreciably better results with both text and photos than my i850. Also, would it be faster and cheaper in the long run than the MP600? While quality of results is more important than anything else, speed, economy, and convenience also enter into the equation.

(I was also considering the Canon PIXMA iP6700D photo printer, but from what I've read so far it appears that the MP600 all-in-one is more highly-regarded.)

I would appreciate hearing from anyone who has an opinon on this matter. Thank you very much.
 

A:Canon i850 printer vs. Canon Pixma MP600 All-in-One

9 more replies
Answer Match 59.64%

A poster talked about his woes with a printer under Vista; I'm having the same problem with a Lexmark printer on a Gateway . Nearly every time I plug in the USB cable, Vista HP tells me it's searching for the driver software to install. Eventually it does install, with a new printer instance.

I've been through the drill with Lexmark tech support several times; I've downloaded their "cleanup" software to completely uninstall the drivers and then reinstalled, but with no success. Perhaps 75-80 percent of the time I connect the printer, I have to reinstall the drivers.

Lexmark techs also suggested that the BIOS might be out of date, which sounds dubious because Vista handles calls to the printer, not the BIOS. But in any case the BIOS is current.

I'll try the suggestion in the other thread to disable UAC and install, but would appreciate any other thoughts people may have.
 

More replies
Answer Match 55.86%

When I tried to install a new Canon Pixma ip6220D printer on my Sony Vaio Windows XP Media Edition w/ SP2 desktop I receive an error that the computer cannot detect the printer after I hook-up the USB cable to the computer from the printer. This is after a balloon dialog appears in the system tray noting that new hardware was found - the hardware being a Canon ip6220D. The Canon software notes that it could not detect the printer and that there was a printer driver failure. Eventually a Windows error box appears noting that an error occurred installing the new hardware.

I have the same problem with a printer that previously had no problems. That printer is a HP Photosmart 3210xi.

I ran malware check using Threat Fire 3 which didn't find anything.

I have tried different USB ports with no success. I have tried USB ports that other devices use with no success.

Any suggestions on how to attack this problem would be appreciated.
 

More replies
Answer Match 55.86%

My trusty old Canon printer S400 finally has decided to act up and quit on me after several years. I am getting an Error 5700 when I attempt to print to it. I can not locate what this error means.

If someone knows, I'd appreciate it.
 

A:Canon printer error 5700 on S400 printer

I don`t know what the error means, but have you tried uninstalling then reinstalling the printer?

Check the cables for damage and connection.

If this doesn`t work then maybe a new printer is in order.

Regards Howard
 

15 more replies
Answer Match 55.02%

Does anyone know of a Lexmark or generic driver that might trick an X74 All-in-One to work with Vista?

A:Printer Driver For Vista

There is no Vista drivers direct from Lexmark http://www.lexmark.com/lexmark/sequentiale...89_0_en,00.htmlHave you tried the XP driver? Although doubtful it will work.

2 more replies
Answer Match 54.6%

I get a printer error that I have two of the same cartridge installed (which I don't). I did the maintenance cleaning. I was able to get it to print for awhile by opening and closing the lid, but now it is not printing. I use Canon cartridges, and several are new cartridges.
 

More replies
Answer Match 54.6%

I have a stand alone laptop running Vista Business, which happily allowed me to plug in and out of any USB port my printer (HPLaserjet4300dtn). Maybe a coincidence or not but I recently upgraded to Office 2007, and now every time I plug in the same printer it sets it up as a new device driver, so I have multiple drivers of the same printer. To attemp to clean this up I tried to delete the printer drivers and now the printrer wont work at all. Can't uninstall them and so I can't intsall a new driver from the HP site. I just don't know what's happened.

A:Vista x32 Printer driver problems

Disconnect the printer, uninstall printer driver/program, then reboot.

Delete folder containing the printer files. Example - C:\HPLJ4300. Never delete if you are uncertain.

Then reinstall the driver, and follow the prompts about reconnecting the printer.

2 more replies
Answer Match 54.6%

hello,

I have a vista 32 bit. I just bought an hp officejet 5610 all-in-one printer. It came with the vista software cd.

While installing, it says to connect the usb from printer then i get an error saying "Windows can not find printer driver". i ve downloaded the driver from the hp website and am still gettting same error. Can someone pls help me out plssssssssss.
 

A:Windows vista and hp printer driver

6 more replies
Answer Match 54.6%

Trying to install the Epson Rx580 all in one printer.

It was purchased for a pre Vista PC- recently upgraded to a new Vista PC.

The CD contains XP drivers, I go to EPson website and they have a download for the Vista Drivers.

After downloading the .exe, it begins to run and says "Printer does not work with your operating system"

Epsons website said in 2 different places that this printer was compatible with Vista

Any suggestions?
 

A:Printer Driver problem with vista

6 more replies
Answer Match 54.6%

I have a Samsung printer, model: SCX-4216F/XSA.
It worked ok with Windows XP, but after I upgraded the operating system to
Windows Vista, it does not work any more.

I cannot find the driver for this printer for Vista from the Samsung website.

Anyone can help?

A:Samsung printer driver for Vista

Hi Pkwok and welcome to the forum

Here is a link to the main support page for your device. Hope this helps.

Search Result SAMSUNG

2 more replies
Answer Match 54.6%

I have a ASUS notebook with vista home premium 32 bit, I purchased a new canon all in one printer, I have downloaded the canon software for the printer with no problem the computer see's the printer and I can even run the scanner from the printer but when I try to print it won't do it.I have talk with canon and asus and have tried to resolve the problem with no success.I also loaded the printer on a friends system that has xp and it worked fine. Any help in this matter would be GREATLY APPRECIATED!
 

A:vista printer driver problem

15 more replies
Answer Match 54.6%

Howdy all!

I'm running Vista Home with Office Enterprise. I have several printers that I hook up to on a network and can easily add them and use them. However, when I shutdown my computer, I seem to be losing something and cannot use the printers again without deleting them from my system and reloading them.

I never used to have the problem, but have recently had two failed attempts at loading service pack 1. Since recovering from them I have not been able to resolve the issue.

I have done a scan and am find a lot of errors in the cbs.log file that look like this:

-10-22 12:44:23, Info CSI 00000104 Ignoring duplicate ownership for directory [l:108{54}]"\??\C:\Program Files\Common Files\Microsoft Shared\Ink" in component Microsoft-Windows-TabletPC-Platform-COMRuntime, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral

Any ideas?????

Cheers
Dan

More replies
Answer Match 53.76%

We have a new laptop with Vista os. we have added it to our network, which consists of an XP desktop wired to the printer and a couple of other laptops both xp which also use the printer wirerlessly.

The printer is a dell 942 which is compatible with both vista and xp

The network is set up correctly and all computors can see each other,

Without considering the need for different drivers being needed for the different OS, i attempted to install the printer to the new vista laptop via the visible printer in the network folder on the vista laptop.

vista laptop wouldnt accept the printer and mentioned something about spools!

my research found this:-

[URL="http://vista.blorge.com/2008/06/19/windows-vista-finally-made-to-play-nice-with-dell-printer/"URL]

now im confused!
does my xp desktop need the vista drivers?

do i use the dell patch on the vista laptop even though the printer isnt installed on it but may have some bits of an xp driver somewhere in its workings because of the failed attempt to install? or just roll back the system?

im guessing all my other laptops wont be effected, but then again????
 

A:Solved: connecting printer to vista and xp driver?

6 more replies
Answer Match 53.76%

Hi! Guys
Has anyone got a solution to Panasonic not providing a driver for PanasonicKX-P7100 printer. I have just bought a new computer with Vista installed and I cannot get a driver for it. There is no parallel connection on the new computer so I have ordered a usb to parallel connector to try that but I don't hold out much hope.
Cheers, Ken.

More replies
Answer Match 53.76%

I tried installing my HP 1310 all-in-one printer driver on my Windows Vista Home Premium 32 bit system, and a message pops up telling me that I cannot install the software because it only works with Windows XP or earlier operating systems. Is there any way around this?

Thanks.

A:HP 1310 printer driver not compatible with Vista

Hi, lizastreet, and welcome to the forums.

Have you tried visiting HP's website for drivers for Vista?

I went there myself and only saw 1311, 1312, 1315 (3 models) and 1317 and 1318 listed as possible model choices....

1 more replies
Answer Match 53.76%

I've just installed a printer driver for my Lexmark printer which I downloaded from their website. Now when I restarted the computer Vista (Home Basic) asked me to activate itself again which I did and now on the desktop loads of my icons have disappeared leaving only the lexmark icon.

Anyone any ideas what could be the problem and what I can do about it?

Cheers, Mark
 

More replies
Answer Match 53.76%

Hello All, Haven't been to TechSupport Forum for a long time, and everything seems different now, it feels like an entirely new website. Any how here is my question:

Trying to setup two network printers at office on a Laptop running Vista. And it has been giving me quite a difficult time, and hoping some old friends here could help out.

OS: Vista SP1
Printers: Toshiba E2550C, Toshiba E655
Setup: all devices are connected to a switch, then router, then to a DSL modem.

Method used to install printers:
1. add local printer
2. create a TCPIP port
3. enter local address of Printer
4. Then things went south.

The address is suppose to be 192.168.2.230, but Windows automatically added a "_1" (see below image) to the end of the address. So even if I follow through the installation wizard, print jobs will not be directed to the correct device. The same goes for the other printer.

Just curious why Vista would add the "_1" to the address. At first, I thought the port is being occupied by another process. Then I used netstat to check for all ports, and no service is running on the same address.

I am desperate. And this matter is like a needle in my thumb, going crazy if don't resolve this soon.

HELP!

A:Vista unable to install printer driver

I have always used the "Find Printer" option and let the computer do the work. If you have no printers installed (or uninstall what you have), then from a program like Word, select print and when prompted, or when the appropriate button appears, say "Yes, I'd like to find a printer on the network", then the printer will either self-install, or at the right moment prompt for the insertion of a driver disc. I have always found this the most reliable way of getting the right bits of the printer software in the right place.

3 more replies
Answer Match 53.76%

Greetings. This is a long shot. I have installed an original version of Vista on an old PC to replace a neighbour's even older one, - it works well but SP upgrades fail. She has a Lexmark Z13 printer and I can't find a driver for it. The only one I did find on Driverguide turned out to be in Russian. I know it's unlikely but I'd be very grateful if someone out there can put me on to a driver for this old setup.
Many thanks.
 

More replies
Answer Match 53.76%

I am looking for Linotronic Printer driver in windows vista ultimate. It is not under default printer list.
You can find this driver in the default printer list of all othe windows versions. but not in vista. where i can find it from?

A:Linotronic Printer Driver for VISTA Ultimate

have you tried the XP printer driver.
What is the exact printer you are trying to use?
have you tried the MS Publisher imagesetter.



This is found under Generic printers.

5 more replies
Answer Match 53.76%

Lexmark is not supporting a Vista Printer Driver for their X73 All IN One Printers, stating that they are too old. This printer works fine on my XP computer, but the only thing that it will do on my Vista Laptop is Scan. Is there not a generic printer driver that will allow to print from this laptop?
 

A:Solved: Vista Printer Driver for Lexmark X73 All in One

See this thread:
http://social.technet.microsoft.com.../thread/7b7f10ab-c9e9-4120-864f-fda977b2ebc9/

"I am new to this forum but had to write in because it helped me w/my problem. I have an X73 also. Lexmark just sent me an email telling me they have no plans to update the driver for this printer to be compatible with Vista. However, this forum helped tremendously and I am now able to both scan and print with mine.

Here is what I did: I installed the latest (XP) drivers for my printer, making sure I did so as an administrator (by right clicking and choosing to load as administrator). I did not have the option to select XP SP2 compatibility mode either, so I just installed it. It installed the scan and copy control program, but failed on attempting to install the printer. The scanner works great. However, thanks to Mepis Man's post to use the Z42 driver, I went into the Printers program and clicked "Add Printer". I then chose the Z42 as my printer and set it up on the USB port and it works like a charm. It also works perfectly with my scanner as well (the printer integrates with the scanner).

I had been through many issues with this and was close to tossing it out until I came across this forum.

I can't be happier as I had been fighting this thing for the past 3 weeks and bemoaning the fact that I had purchased Vista. Thank you for your help on this forum!"
 

1 more replies
Answer Match 53.34%

Hello,I've an HP Laserjet 1100 printer and I need the driver for w7 ... it's on Vista with (MS) ... can I retrieved it on W7 ?

A:retrive the HP LASERJET 1100 printer driver from vista ... to W7

Use the Windows Update button during add printer and it will load the driver but be patient, it can take 10 minutes to get the results.
It has the HP 1100 driver.

9 more replies
Answer Match 53.34%

I have purchased a HCL H505 Printer about two years ago now I have upgraded my system to Windows Vista Operating system, due to which the printer driver supplied works no longer in Windows Vista Please help me the printer works fine in Windows XP
 

A:Driver for H505 printer to work in Windows Vista

7 more replies
Answer Match 53.34%

Hi.
I just purchased an HP Pavilion Vista64 (AMD) laptop.
I have a Xerox MFC PE-16 unit which in itself is a usb MFC. It is connected to a Hawking Technology (HT)USB-Ethernet printer server device (H-PS1U). All my home computers are windows 32 bit exept this new laptop. I tried getting a driver from HT but it's not available. A new HP printer server that's 64 bit OS compatible would set me back over $150.00. Could anyone help in any form, cheaper printer server or a new driver?
Thanks

More replies
Answer Match 53.34%

Hi,

i have installed my printer (HP InkJet 1200) on my Vista x64 and have given the Printer free to my Network. On my Notebook (XP 32Bit), I can see the printer, but couldn't print because of false drivers (64Bit instead of 32Bit).

So I have to install the 32Bit-Driver in Vista64 as additional-printer-drivers but I haven't Vista drivers (HP has not). The only drivers are on the Vista-DVD, but how can I extract the Drivers from the Vista-x86-DVD?

Thanks and greetings
huelfi

----------------------------------------------------------------------------------
Hi,

ich hab ein Problem mit meinem Drucker (HP Inkjet 1200), Vista x64 und einer Druckerfreigabe zu XP (x86).

Ich hab den Drucker an meinem PC angeschlossen und den Treiber von der Vista-DVD installiert. Bei HP gibt es keine Vista-Treiber f?r den Drucker. L?uft aber alles soweit.

Meine Druckerfreigabe funktioniert auch, aber Windows XP kann nicht drucken, da der Treiber auf meinem Vista ja ein 64-Bit-Treiber ist. Ich wollte also in den Druckereinstellungen in der entsprechenden Option die x86-Treiber hinzuf?gen. Leider kann ich die ja nicht downloaden und den von XP will er nicht. Ich wollte also die von meiner Vista x86-DVD nehmen, kann dort aber keinen finden.

K?nnt ihr mir sagen, wo ich den Treiber auf der Vista-DVD finde?
Oder mache ich da was grunds?tzliches falsch?

Danke und LG
huelfi

A:Searching for Printer-Driver (HP Inkjet 1200) on Vista-DVD

Hi huelfi and welcome to Vista Forums

Sorry, but I don't understand German. Could you please provide an English translation of your post (see Rule 10 here: http://www.vistax64.com/general-disc...tml#post561775)

7 more replies
Answer Match 53.34%

Last year I bought a HP Pavilion running Vista, and I'd like to download a driver for my HP 5 printer. HP tells me it can't be done, but has anyone managed to do it? I have downloaded a file with an "inf" extension on my hard drive for the printer; I found a tutorial but can't see the tab for the driver under devices. Thanks.

A:adding printer driver for HP inkjet to Vista system

Device Manager - Install Driver
This may help

5 more replies
Answer Match 52.08%

Can anyone advise where I can get a Vista (64 bit) printer driver for the Epson RX620 so I print from my Dell laptop. I have followed the instructions that appear on the Epson downloads & drivers site as follows;

<Description: Windows Vista drivers for this model are included in the Vista operating system. To install, simply power-on and connect your Epson product to your computer and follow the on-screen instructions.
Compatible Systems: Windows Vista 32-bit, Windows Vista 64-bit>

Having follwed the search instructions there does not appear to be any suitable driver available either on the C drive or the Drivers & Utilities disk ('already installed on your computer') which came with the laptop.

As expected, the Epson CD which came with the printer (a number of years ago) does not include a driver for Vista.

Thanks,
Al.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Ultimate, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4059 Mb
Graphics Card: ATI Mobility Radeon HD 4670, 1024 Mb
Hard Drives: C: Total - 290205 MB, Free - 178437 MB; D: Total - 14999 MB, Free - 3677 MB;
Motherboard: Dell Inc., 0Y536R
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
 

A:Solved: Vista Printer driver for Epson Stylus Photo Rx620

16 more replies
Answer Match 52.08%

hi guys
I need your help I am getting message PRINTER DRIVER WAS NOT INSTALLED ACCESS IS DENIED while I am login through administrator account
Its Xerox Network printer and trying to installed in windows vista

waiting .......................

A:printer driver was not installed access is deined message in windows vista

Hi -

Download the driver update to your desktop. Go to desktop, right-click on the icon and select "Run as Administrator".

Regards. . .

jcgriff2

.

1 more replies
Answer Match 51.66%

Hi. I am a computer dumby and I just got a new computer. My new computer obviously has Vista on it (apparently Vista SP1, if that means anything) and I am trying to setup my printer (Epson Stylus CX4200). I inserted the printer disk and part way through the download, a screen called the "Program Compatibility Assistant" popped up saying that the "Epson printer driver setup utility is incompatible with this version of Vista". What does this mean? What do I do to get my printer setup on my new computer? Help!

A:Epson Stylus CX4200 printer driver setup utility compatibility with Vista

it means the setup program itself is incompatible, not the drivers.just grab the latest drivers from the epson website.

2 more replies
Answer Match 51.24%

Hi, I have a Dell Inspiron desktop that's 3 yrs old and my new canon printer is connected via USB cable. I just bought a Lenovo laptop to which I connected the printer via wi-fi. I've also downloaded Win 10 recently. My problem is I can't get my printer to work thru my desktop. I can print thru my laptop but not my desktop. Could the problem be that the printer is connected thru the USB cable for the desktop and the wi-fi for the laptop? Thx for the help
 

More replies
Answer Match 51.24%

I regret posting a second time, but somehow a post intended for the OS group landed in Hardware, which caused my question to be closed.

With my Dell Dimension 4550 I tried to install my 3 year old Canon BJC 5100 but the CD fails installation as incompatible with XP. I went to the Canon site thinking I needed a new driver but could not find one for this model, so I wrote Canon and got a response that this model is not supported for XP.

Since I am unable to install from the CD, can anyone suggest a way to install my printer???
 

A:XP & Canon printer

Unless Canon updates the driver and software for the printer you will not be able to use it, unfortunately.
 

1 more replies
Answer Match 51.24%

I have a Canon BJC-6000 printer. It is beeping 8 times telling me that the waste tank is almost full! I have opened the machine and have found the waste tank. Now I need to clean or replace the 'tank' and reset(?) the beeper (counter?). Can anyone help me. (PS I am already in contact with Canon, don't refer me there.) Thanks, .....John
 

A:Canon Printer

Waste Error Reset:
1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
7: Press Power to set data
 

2 more replies
Answer Match 51.24%

Appreciate some assistance.

This is one question Canon will not like.

Have two printers, a Canon BJC 2000, and a Canon BJC 250.
Use bulk black ink to refill the Canon BJC 2000, and was wondering whether the same ink could be used to refill the BJC 250. Do printers normally use "specific" ink for their make and model, or would any black bubble-jet printer ink be OK?
 

A:Ink for Canon Printer

11 more replies
Answer Match 51.24%

hi guys i am back now with a small thing
i have in my office a canon ir3035n and i inserted into my pc and i didn't need any drivers as it installed itself (without internet) but the thing is all the other computers in the office have a different driver.
what do i mean as when i go into printing preferences i have nearly nothing, but all the other computers have a full program (not a actual program) with options like which drawer to take the papers to where it should come out etc. so i was wandering where could i find it i made some searches tried to install some thing like canon ir3035/3045 PS3 but the problem with this one was that it didn't print!
so please if someone could help me to find the correct printing (if possible also the scanning) driver
i would really appreciate it
thanks

A:canon printer

Did you Install any of the Drivers from the Link below ? ...
http://software.canon-europe.com/products/0010415.asp

9 more replies
Answer Match 51.24%

My MX 870 printer is not printing. The item are backing up in the queue. (the WiFi light is on , if that means anything) I recently added a second computer, (lap-top), in a network.

HELP

A:Canon MX 870 Printer

Hello and Welcome to TSF!

I wonder if you have an Auto IP or DHCP setup for this printer. This need to be a Fixed IP, any wireless device with Auto IP assigned is not recommended.

See if the Printer IP matches with the wireless computers in your network, click on Start=> Printers and Faxes or you may also find this from Control Panel. Locate the Canon printer, right click on it, go to Properties, Port Tab and in here you shd be able to see the IP Address. From the Canon printer, look in the Menu Setting, under Network or TCP/IP setting to locate the IP Address, make sure it's on Static and the IP matches the IP in all computers in your network.

1 more replies
Answer Match 51.24%

I have a Canon MP 830 printer. It had been working fine, but one day the printer would not turn on. I checked the power cord and it works. Any ideas? Is there an internal fuse or breaker that could have tripped?
 

A:Canon MP 830 Printer

Moving this to hardware.
 

1 more replies
Answer Match 51.24%

Could someone please tell me how to invert print with a Canon IP 1800? I'm sure there has to be an option for it somewhere but for the life of me I can't find it.

Thanks for your help.
 

More replies
Answer Match 51.24%

If I receive a reply to this query that contains any "useful" info, I'll be pleasantly surprised. My OS is Windows 98. Several days ago I had installed a Canon BJC 620 printer. The appropriate driver was installed. I've been using it and it has been printing without any problems. Went to print tonight and it wouldn't print at all. Opened the Control Panel, went to printers, and the printer isn't there! The only icon in the box is the one that says "Add New Printer." Went to "Add New Hardware" to reinstall printer. My printer is not in the list provided. Am using a parallel port. Can anyone tell me, step by step, just how to install this printer? Does anyone know what in the world caused the printer to just disappear as if it had never been installed in the first place? Like I said, I really would appreciate any help anyone can provide, but I'm not holding my breath. Thanks.
 

A:Canon BJC 620 printer

Not exactly a positive attitude you have there. Have you checked the usual like the attachment of the printer cable and power plug? In Device Manager under ports is the LPT port listed as working?
 

1 more replies
Answer Match 51.24%

Ive got a MP540 and for some reason when i print something it wants to print from the rear paper feed as opposed to the much easily accessible paper tray at the bottom of the unit. Is there anyway I can stop the printer from wanting to print via the rear paper feed

thanks
 

A:Canon MP 540 printer

Did it come with control software that allows you to configure the printer via the PC, through the properties of the printer?
 

3 more replies
Answer Match 51.24%

I have a i80 printer it says you can plug a mobile in to send pics to printer, is this correct, also where do I buy this from and also do I need the av/dc lead to go into the i80 printer.

Another I have a canon lide60 scanner, what do I install to make the pics come up on screen.

More replies
Answer Match 51.24%

Is it possible to get longer use out of cartridges for the lowly BJC-2000SP (black and colour) and BJ-30(black). Mine run out almost straight away. I've tried what the manuals say about draft mode and speed settings.
 

A:canon printer

8 more replies
Answer Match 51.24%

A friend has a new 64 bit Win 7 computer and an "older" Canon BJC 250 printer that she wants to be able to use just as she did with XP. It connects with USB and Win 7 recognizes the connection but the printer does not show up anywhere, such as on Devices and Printers page. I have dowloaded the Canon driver but am stymied at that point. Suggestions and help appreciated.

A:Canon BJC printer and Win 7 64 bit

I've looked at Canon's driver page for the BJC-250 and unfortunately that model is not supported on windows 7, nor is it supported on Windows Vista. The last driver that Canon released for that model was for Windows XP in 2003 and that definitely won't work on Windows 7.

Canon have evidently decided that the BJC-250 is too old for them to spend money writing new drivers for it. This is not unusual as other device manufacturers have also done the same with some of their discontinued models.

So if, as you say, you've already downloaded a driver for it I'm puzzled as to where you got it from.

The bottom line is that you'll have to buy a new printer for Windows 7.

3 more replies
Answer Match 51.24%

i recently installed a new canon pixma mp130 all in one.since install my windows defrag. program will not work,aldo any third party defrag programs either.regseeker 1.45 will not load or loads very very slowly.worst of all i can only shut down computer via switch on box.system is pentium 4 3.4ghz ht.512 mb ddr ram and was working with zero faults till addition of printer software.i have reformatted and carried out total reinstallation but to no avail.any ideas please.

A:canon printer

If you let the auto install do the installation of the printer, that could be the problem. Canon has had some problems with the auto hardware install.

3 more replies
Answer Match 50.82%

Hiya, I wonder if anyone can help me, I have a BT multijet 3000 printer which worked fine on XP, but when upgraded to vista says unrecognised device, the driver isnt in vista, the cd which accompanied the printer doesnt work, and the company stopped support for the printer before vista came out, I wonder if anyone can help me to find the driver or tell me how to set up a generic printer so it can at least print documents, I tried the generic ones on vista xps and image one, but they didnt work, any way of how to set up the port manually, its USB, and there is no option for usb, just says lpt1 or com ports on the xps one
Help! Thanks

More replies
Answer Match 50.4%

I have tried several times to connect the Canon MP 540 printer to my PC -following the instructions to the letter. I have XP SP3. The USB cables and ports are fine ? they work with other peripherals.

The connection stops every time at the same point. On the printer connection screen when I switch the printer on it says ?The printer is detected. Please wait until the installation is complete.? Then nothing happens. The help button gives two courses of action. I have tried both ? always end up at same point. After about five minutes the screen changes to ?The printer is not detected. Please check the connection.?

Canon are useless. The box says minimum requirements XP SP2. An e-mail from Canon says the drivers don't support XP SP3. Canon Tech support says it does! I have used Regcure to try to sort out XP. No luck.
The printer installed fine on my (work) laptop which also has XP SP3!
Any ideas?

A:XP SP3 and Canon MP540 printer

got the same problem- anyone can help?

5 more replies
Answer Match 50.4%

I am trying to change my printer settings - I want to go to options while in Explorer and tick "print table of links" I can find the page and do the tick but the apply is dimmed so you cannot choose it. How do I make this change. Thanks
 

More replies
Answer Match 50.4%

I have a pixma mp450 printer and i contacted canon support they couldn't fix it.It first said the print spooler has stopped but i fixed it.Now it gets half way done downloading the printer driver for windows 7 and it says "An error oucurred while registering the readme.txt." How do i fix this?!?!? i need the printer for work
 

A:Canon printer Error?!?!

Might be having permission issues writing the readme file
to your user account.
Try right clicking the setup program and click run as administrator.
 

2 more replies
Answer Match 50.4%

the printer was bought two years ago. It worked fine until last month.

the error message says "The appropriate print head is not installed."
I sent a message to canon's service department, the response is to buy a new print head.

I never did any inside cleaning or maintenance except refilling the ink cartridges. the pritner is kept clean.

the questions are:

any solution to fix this error?
should I order a new print head?
may it be any other problems besides the print head?
 

A:printer canon i350

If you have been using inks from a third party (not Canon) you have probably trashed the print head. A new print head is usually more than a replacement printer. Sorry, and I know the price of the ink, but the lesson is never ever use 3rd party inks or cartridges.
 

3 more replies
Answer Match 50.4%

I replaced the color cartridge. and it still says its empty.. I have looked every where to find out how to reset it. But cant find anything. I even checked canon web page. i can print. But it drives me nuts.. can some one please help me
 

A:Help with a canon mp280 printer

Two typical causes, the printer itself, or the Windows monitoring app.

Uninstall the software/drivers using Add and Remove programs, reboot, and reinstall.
 

3 more replies