Tech Problem Aggregator

Hp Touchsmart TM2 crashing

Q: Hp Touchsmart TM2 crashing

Good Evening, I have a HP Touchsmart TM2-I can supply the specs if you need them- and it has just started to crash at almost every click/action which I take. THis has only happened within the last couple of days and it has been instant, rather than over time. I did a System Restore but this didn't solve the issue. It may ahve been because I had to stop a disk check last week because my laptop battery died but I'm not sure if that would have such a big effect on the laptops performance.

Any help is greatly appreciated!

Thanks a lot
Dan

A: Hp Touchsmart TM2 crashing

That would have a huge effect not finishing a disk check. If you can boot in, Make sure you have your power adapter attached, Go to Start/Search and type CMD Right click the CMD.exe icon in the Search Results and Run As Administrator. In the Command Prompt type chkdsk /R and press enter. Now type a Y and reboot the computer. The Check Disk Utility will try and fix any problems.

3 more replies
Answer Match 57.12%

we have a brand new hp touchsmart 600-1365qd w/ a new Windows 7 and it crashes at least 3 times a day. Sometimes it crashes where it says the problem is blue screen and it says something about dumping, but the computer doesn't know how to let me read the dump file (.dmp), even though I probably wouldn't understand it even if it did.

Other times, it freezes, the mouse doesn't move, or the internet pages just keep working to load (when connection is fine), and ctrl-alt-delete won't stop it and I have to turn the power off and on to reboot. I thought it is a computer problem but you had another post that mentioned Windows 7 crashing so I thought I'd run it by you.

This last crash/reboot happened without me doing anything, and I had excel, and three tabs of the internet running that was it. Any ideas?
Thanks so much!

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8007B0C050
BCP3: FFFFF80000B9C518
BCP4: FFFFFA800A565010
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

A:new hp touchsmart w/ windows 7 keeps crashing

Hello,

Could you follow our BSOD posting instructions?

http://www.techsupportforum.com/f217...ns-452654.html

11 more replies
Answer Match 56.28%

I'm pretty sure I'm convinced this is due to a crappy battery that I need to take care of but I've checked my memory and everything seems to be okay but my laptop keeps crashing every once in awhile and my battery won't charge (I've had it for almost three years).  I reboot the computer and everything is fine but it will still crash every couple of days or so.  Unfortunately today, it crashed four times today. Is this a battery problem and if so, where can I get a new laptop battery for cheap?

More replies
Answer Match 56.28%

Hello,

My laptop is 2 months old and i'm getting the blue screen more and more often. Here is a report of what is crashing. i also receive this error with the blue screen: SYSTEM_TH​READ_EXCEP​TION_NOT_H​ANDLED (ATIKMDAG.​SYS) Can someone please help me?

On Sun 2/15/2015 3:51:37 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\021515-30984-01.dmp
This was probably caused by the following module: atikmdag.sys (atikmdag+0xC50AB)
Bugcheck code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF800651550AB, 0xFFFFD0006D186128, 0xFFFFD0006D185930)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\drivers\atikmdag.sys
product: ATI Radeon Family
company: Advanced Micro Devices, Inc.
description: ATI Radeon Kernel Mode Driver
Bug check description: This indicates that a system thread generated an exception which the error handler did not catch.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, Advanced Micro Devices, Inc.).
Google query: Advanced Micro Devices, Inc. SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M

On Sun 2/15/2015 3:51:37 PM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: atikmdag.sys... Read more

A:HP TouchSmart 15 Crashing - blue screen

Beatles78
1. Welcome to Tech Support Guy
2. Sorry you have waited a few days for a reply
3. Do you still require help please
4. If so your first course of action is to go Control Panel - device manager
expand the entry
display adapters
right click the entry for your graphics
click properties
click the driver tab
if roll back drive is available and not grey out click that
if that is not available and update driver is
click that
if either reports success reboot and try
If that does not work when you reply I will further advise you
 

1 more replies
Answer Match 49.56%

Hello, I am Portuguese and I have a driver problem with my computer.
Computer Information (HP):

Model: Notebook PC HP TouchSmart tm2-2050e
Operating System: Windows 7 64bit (service pack 1)
Version bios: f.25
antivirus: avast free
Maintenance: ccleaner and Advanced SystemCare Pro
Update drivers: ma-config and SlimDrivers









The problem is as follows:

The hard drive was in trouble, so it was replaced.

Then I put the windows 7 again.

And there was no problem, until the driver (s) touch (touchsmart) does not work.







I've done:

I tested it with my finger and pen hit the computer screen.

I went to HP's download page all available drivers for my computer, did not work.

Update drivers with the program ma-config and SlimDrivers not resulted.









Link all the information from my computer:
Configura??o Resumo

Link information about my dxdiag (hosted on google docs / drive):
https://docs.google.com/file/d/0B1iZ...it?usp=sharing


Sorry about the spelling mistakes.

And please, help me.

Thank you.

A:Notebook HP touchsmart tm2-2050ep error driver touchsmart

Hi there .... I understand your touch screen is not working .... Is the touch-pad working though ? Is there any errors in the Device manager ? .... Which Drivers did you download from the HP web site ? .... Did you download Drivers from any where else ? ... Also where you able to get Windows activated ?

9 more replies
Answer Match 35.28%

Hi there. I am writing a post here because I am really mad. Few months ago I have bought my lenovo y50-70 4gb ram gtx960M and the problem occurs until today. The problem is, when I start to play "heavy" games ( like gta 5 or cs; go, lmao) this wonderlaptop crashes. Every time I launch a game, this lapop crashes. I can play 30 mins or 2 seconds but It ALWAYS CRASHES. Firstly, It said that nvidia driver stop responding bla bla bla. So I was searching solution in Internet. They told me to reinstall graphic drivers etc. Ok I did it. Guess what? Crash? Of course it crashes. I was very upset so I decided to update my windows. From W7 64b to W10 64b. Guess what? Ye ye, it still crashes. I turned on V-sync and It helps. Rly. Now i do not receive this annoying statement with "nvidia display stop responding bla bla bla" Now it only crashes without any errors. Sometimes with blue screen but rly rare (thx). Sound loops, image stops, and system crashes. I tried every driver, beta driver, hotfix driver, latest driver, non latest driver. JUST EVERY DRIVER. It doesnt help. I hope u will.Regards! @edit. All temps are fine. Idle 45-50 C  stress 55-65.

A:Lenovo y50-70, crashing, crashing, crashing, crash...

I had the same issue. It would crash with every game where nvidia card was used instead of intel. I tried various nvidia drivers but it didn't help. However I tried a really old driver 347.66 (not sure about the numbers after the ' . ') and it worked like a charm! No more crashes and the laptop is stable even after hours of gaming. After that I have never updated the nvidia drivers

3 more replies
Answer Match 34.86%

Hello, i have a HP TouchSmart computer that i need to reformat badly. I am wondering if reformatting it with any regular vista CD key will lose such features as the touchscreen, wireless mouse & keyboard, built in webcam.

The Original owner of the computer claims it came with its own Vista CD key that he lost.

A:HP TouchSmart

Hi Jack0000


If the HP restore partition is in good condition (not damaged or malware-ridden), you can perform a re-write of the factory-original hard-disk-image by tapping the F11 as your HP is first powered on, then following the prompts as shown (step-by-step, with screenshots) in the following instructions at the HP support website --- http://h10025.www1.hp.com/ewfrf/wc/d...=3752240#N1066

Note that you'd first want to move any data that you wish to save off to removable or external media before you run a return to factory original.

Once the factory-original image is restored, you'll have to visit Windows Update to get the Security Updates since the TouchSmart was shipped. You'll want to update the Security software as well (if you need a free alternative, I think "avast! antivirus" is a good choice).

Once the PC is updated and fully protected against malware, you can then create a recovery disk set onto DVDs following the instructions from this HP support webpage --- http://h10025.www1.hp.com/ewfrf/wc/d...name=c00882383

Having made your own Recovery DVD set allows you the freedom of running the recovery onto a new, blank drive - should you need or wish to upgrade to a new hard drive in the future.

You can, of course, also order Recovery DVDs directly from HP for most models. The price is considerably less than purchasing a Windows license retail. Much less.

Best of luck
. . . Gary

2 more replies
Answer Match 34.86%

My question: Is the TouchSmart tm2 compatible with WIN 10 and what must be accomplished to achieve a successful install? First, a slignt rant.I was successfuly running WIN 10 on my TouchSmart tm2 when I updated a video driver and afterwards could only get a blank screen. Yes, my bad! I paid HP $99 for incident support and their only suggestion was to do a full system recovery & reinstall WIN 7 Pro. Really? You made me pay for that?  Since I didn't have the OS disks (it was OEM) I had to pay HP $25 for the media and $15 FOR SECOND DAY DELIVERY ONLY TO HAVE THE MEDIA ARRIVE ON DAY 3.  I can't reach anyone at HP to refund the delivery failure. Now support is stating that my computer isn't compatible with WIN 10. If I was successfully running WIN 10, why is it now un compatable?  

A:touchsmart tm2 and win 10

I have just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.

3 more replies
Answer Match 34.86%

Hello I have a HP Pavilion TouchSmart Laptop.In the last week the touch screen has stopped working.I was just wondering if anyone was able to help me to get this running again as its really annoying without itThanks in advance

A:touchsmart

Hello @S_tim, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are having an issue with the Touch Screen, and wanted to assist you! To start, can you provide me with the Product Number and Operating System of the notebook?  You can use the links below to help you with that information:HP Customer Support - ProductsWhich Windows operating system am I running? In the meantime, try performing a System Restore to set the notebook back to its previous working state.  If you are still having trouble, then try reviewing the following document, and let me know how it goes: HP Notebook PCs - Touch Screen Issues (Windows 8) Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great day!

1 more replies
Answer Match 34.86%

Hi, I have a touchsmart tm2, with windows 7 x64 and  i could use a external monitor, with no problems.when i upgrade to windows 10, the external monitor canīt be deteted.i upgrade the amd driver and the intel driver, but it donīt work.Can anyone give a help! Best regards 

More replies
Answer Match 34.86%

My HP Touchsmart 600 desktop computer has a roughly 5 inch square dead spot on the upper left hand corner of the screen.  Is this a problem that can be easily repaired?  If so, can this be repaired locally? Thank you... Bruce A. Henderson

More replies
Answer Match 34.86%

Good morning, I wanted to know if there is a varsione updated TouchSmart suite for windows 10.After the upgrade from Windows 7 to Windows 10 icon no longer works.Thank look

A:HP TouchSmart

  HI there is no windows 10 driver for HP Touchsmart 600-1205it 

1 more replies
Answer Match 34.86%

Buongiorno, volevo sapere se c'č una varsione aggiornato TouchSmart suite per windows 10.Dopo l'aggiornamento da Windows 7 a Windows 10 icona non funziona pių.Grazie aspetto

A:HP TouchSmart

  hi this is a English support forum not Italian

1 more replies
Answer Match 34.86%

Hello I have a HP Pavilion TouchSmart Laptop.In the last week the touch screen has stopped working.I was just wondering if anyone was able to help me to get this running again as its really annoying without itThanks in advance

More replies
Answer Match 34.86%

My hp touchsmart 300 1025 is shutting down unexpectadly. I have had it for a little over a year (out of warranty) and it just started to shut down after a few minutes of use. Not sure if it is an overheating problem or a power supply issue? Anybody with same problem? Suggestions welcome!
 

More replies
Answer Match 34.86%

I am having trouble with the touch screen aspect of my computer. It works to scroll pages, and click icons, but the multi touch to zoom has stopped working. I have already turned off the touch screen and turned back on, and also have reset my comupter back to default. Help please!
 

More replies
Answer Match 34.44%

Can I install XP on this workstation? It's now runnig on Vista.
I think that will get a problem with the drivers.....

More replies
Answer Match 34.44%

Machine is overheating. Dismantled and lots of dust etc cleaned out but small fan is not working and need a replacement.   Bar code number of existing fan is 1323 00230H2 oA F000 099L     06LH

A:where can I get the smaller fan for an HP Touchsmart 300 PC ...

Hi there @Superuserhp, Welcome back to the HP Support Forums! I understand that you are looking for a replacement fan for your computer.  I am happy to help with this. I would recommend that you check out the HP Parts Store. Be sure that your country is selected and then put in the product information. If the part is not currently in stock, there will likely be authorized sellers listed for the part as well. Please let me know whether that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

1 more replies
Answer Match 34.44%

Hello, Our TouchSmart PC will no longer turn on. It was working yesterday but today will not turn on. The LED on the back of the computer where the power supply meets the PC is off. When you press the power button the LED light flickers green one time but remains off. The computer does not power up at all. I have tested the power supply with a laptop and it is working. I have also tried another identical powersupply on the PC but the same thing occurs. Thanks  

A:HP TouchSmart 520 All-In-One Won't Turn On

Hello @cb086, I have reviewed your post and as the adapter works on another device I believe you problem is on the motherboard. The issue appears to be a physical issue. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.I would like to thank you for posting on the HP Forums. Have a great day!

2 more replies
Answer Match 34.44%

I have turned on the pc and found out that there is "cpu fan not detected" f1 - boot.I was advised bybthe owner to use vaccuum cleaner to clean the fan at the bottom. It works pne time but after a while comes the same problem again. How can i solve it without opening the product?

More replies
Answer Match 34.44%

I was unplugging my power cords and I happened to turn off the power to my HP Touchsmart. Later on when I turned it back on, my HP Touchsmart won't switch on. The lights on the big batter adapter thing is on. The light at the back of the computer indicating that power is reaching the computer is on. However, I just can't turn it on at all. The power button does not light up.I've tried the solutions posted on other threads but nothing has worked. I had just been using my computer the previous day. I suspect that me turning off the main power might have done something.Look forward to getting some solutions.

More replies
Answer Match 34.44%

Hello, so I have a hp touchsmart 600-1350a although theres no av cable or hdmi port i checked on the web and it said thathp touchsmart has a hdmi port, also I dont have any ambient light too?

A:PS4 to a HP Touchsmart 600 - 1350a

Hi @markdag, Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel.I understand that you are looking for information on connecting your Touchsmart  All-in-One to a PS4. I am happy to give you a hand with this. The available connections on Touchsmart and All-in-Ones in general vary from model to model. Some have an HDMI port that can be used as an input, and others do not. Looking at the specifications of the model you gave: HP TouchSmart 600-1350a Desktop PC Product Specifications, it shows in one diagram that it could potentially have video inputs, but it is an option. If your system does not have those, then you would not be able to use the display on the All-in-One with your PS4.   I hope that helps clarify, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.   

1 more replies
Answer Match 34.44%

Is this pc compatible with win 10?Thansk  

A:HP TouchSmart 600 Windows 10

I have a HP TouchSmart 600 and based on my experience it's not compatible with Windows 10  not even with Windows 8.x and later.

1 more replies
Answer Match 34.44%

New Computer, that I need to send in, but for piece of mind, I would like to know what's going on. They will repair back to original state, but I will have to reload all programs. Want to make sure that it is not a conflict. Windows 7 64 bit Ultimate.
Thanks in advance for all the help.

A:BSOD - HP TouchSmart 600

SNAFU, welcome to the forum. That is quite few dumps! I looked at your four most recent dumps. All have the same error code and are nearly identical.

I recommend that you uninstall Zone Alarm using this uninstall tool: http://download.zonealarm.com/bin/fr...cpes_clean.exe. ZA is a documented and well known cause of BSOD's on some Win 7 systems. Make sure Windows Firewall is turned on.






Quote:
Error code 7F, UNEXPECTED_KERNEL_MODE_TRAP.







Quote:
Usual causes: Memory corruption, Hardware (memory in particular), Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack



Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c1c000 PsLoadedModuleList = 0xfffff800`02e59e50
Debug session time: Thu Nov 4 16:19:58.484 2010 (GMT-5)
System Uptime: 0 days 21:58:02.827
Loading Kernel Symbols
...............................................................
................................................................
.............................................
Loading User Symbols
Loading unloaded module list
....
************************... Read more

3 more replies
Answer Match 34.44%

Hello everybody. I would like my Hp touchsmart 300 desktop to be upgraded. i only have 2.7GHz as my processor. I would like it to have atleast 3.7 GHz. Do this pc have graphics card? I would like to buy one to place or replace if there is a graphics card. I will also make this pc 8 gb ram. Any  suggestions what parts i will buy 

More replies
Answer Match 34.44%

Hi, I just recently got an Envy All-in-One Touchsmart; it is a super machine and so far, so good. The 10-point touch is really cool, but there are many instances when I would like to be able to use a pen in order to be more precise in my pointing or to "mark up" a document.  I know Microsoft Office has the "inking" feature because I use it on my Laptop with a "pen" while I am traveling and have found it invaluable -- and, by the way this laptop is both touch and pen enabled. I tried to enable "pen" by going to the Control Panel feature that is says says Pen and Touch, but when you do so, it is only for Touch.  How can I make it so that it both touch and pen enabled?  If that is all possible, what type of "pen" do I need? Thank you very much











Solved!
View Solution.

A:Enabling Pen on TouchSmart

Hi AIResnick, A stylus used on a capacitive touch screen basically just takes the place of your finger, so enabling touch on the computer will enable pen input as well. But it can't just be any pen or stylus, the material at the tip has to be something that will register as touch on the screen, and not scratch it. I read your other post and I understand you're looking for a finer-tipped stylus, rather than the ubiquitous blunt-ended, eraser-type stylus pens. That limits your options quite a bit, because I believe the larger surface area is part of what makes those pens work on capacitive screens. (Other types of touch screens can use other styles of stylus, including pointy-tipped ones in some cases.) I've heard good things about the Jot Pro from Adonit. I haven't tried it, so I can't speak from experience. The design seems clever--it looks like they attached a clear, flat disc to the tip of a metal pen, so you can see precisely where you're writing with the point of the pen, but the clear disc provides enough surface area for the touch to register, and prevents damage to your screen from the sharp pen point. I hope that helps.

4 more replies
Answer Match 34.44%

Hi all,

Does anyone here experience install Win XP Pro on HP touchsmart tx2(downgrade from Vista)? I need some advise. thank you.

A:Install XP on HP touchsmart tx2

I would advise you not to install XP on a touchsmart PC. The reasons are as follows.

1. Make sure all of the drivers are available on the HP Support website.
2. Since XP tablet edition is not available in retail, the touch screen won't work.
3. You will have ask HP to give you a OEM version of XP tablet edition (which I don't think they will provide).

If you just want to use it as a non-Touch screen PC. Go you may go ahead only after you have confirmed that the drivers are available.

Post back if you have any more questions.

2 more replies
Answer Match 34.44%

I bought a8GB [2x4GB] DDR3-1333 RAM Memory Upgrade Kit forto upgrade my HP Touchsmart 600-1050 All in one. However, it hadn't worked and showed only black screen after installed.The discription is4GB DDR3-1333 PC3-10600 Non-ECC Unbuffered 204 Pin 1.5V CL=9 Memory After then, I bought a different one of8GB Kit (4GBx2) DDR3 1600 MT/s (PC3 - 12800) CL11 SODIMM Notebook Memory Modules CT2KIT51264BF160B / CT2CP51264BF160B at amaozn.com It has the same problem.Are those not compitable with my computer? If so, please let me know a compitable memory set for upgrade.   

More replies
Answer Match 34.44%

Hello!  I have a TouchSmart 600--an all-in-one with several inputs except one for a second monitor. (On Windows 7). I purchased a VGA - HDMI (AV?) adapter hoping it might work.It did not.Asking for help, or a direction, please. I've searched through several different forum threads similar to mine, but the responses were several years old with no resolution besides perhaps I should have gotten a USB adapter. I've yet to find someone who successfully paired a second monitor. I did get to Display - clicked detect. Nothing was detected. Second monitor (19inch Acer) says no signal. Appreciative of any advice    

More replies
Answer Match 34.44%

I recently baught a hp touchsmart 320-1010a running windows 7 home premium and then installed a new version of windows (windows 7 ultimate) and now the touch screen doesnt work and i have non of the hp touchsmart applications like, hp magic canvas and others. i installed all the drivers from the hp webbsite and it still doesnt work
can somebody please help??? im dying here !

A:My HP Touchsmart is broken please help!!! )';

Download Drivers from the HP Site, Download originals. Make sure you are downloading 64 Bit if you have a 64 Bit OS or x86 for 32 bit Windows.

19 more replies
Answer Match 34.44%

Have trouble for weeks.

Details:

? OS - Windows 7 Ultimate x64
? What was original installed OS on system? = Vista
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? HP oem
? Age of system (hardware) 2009
? Age of OS installation - have you re-installed the OS? december 2011

? CPU = Mobile DualCore Intel Core 2 Duo T9900, 3066 MHz (11.5 x 267)
? Video Card = NVIDIA GeForce 9600M GS (512 MB)
? MotherBoard = Asus IMIMV-CF (Maureen) (2 Mini-PCIE, 2 SO-DIMM, Audio, Video, Gigabit LAN, IEEE-1394)
? Power Supply - brand & wattage = unknown

? System Manufacturer = HP
? Exact model number (if laptop, check label on bottom) = TouchSmart IQ830NL

A:HP TouchSmart BSOD

Hi -

I received your PM re: no dump files.

When are the BSODs occurring? (immediately after boot-up or ... minutes, hours later?)

Please see - NO KERNEL MEMORY DUMP FILES BEING PRODUCED UPON BSOD?

Can you read info from the blue screen? I'm looking for the STOP error and a driver name.

Regards. . .

jcgriff2

`

11 more replies
Answer Match 34.44%

ok guys i really need some help/guidance here.  There is so much infomation here that im sincerely overwhelmed... I will give you as much information as I have and hope SOMEONE can help! First, I hope i selected the correct board to write this in. As stated, I have a pavilion touchsmart23 all in one pc. I am NOT at ALL computer saavy so work with me here. I dont know if its 32 bit or not nor do I know if it is imperative to my issue. Here is my problem. My computer works fine 70% of the time. Suddenly the screen will go black and give me a disk boot error message. I cant remember word for word but this is what it saYS: "no boot disk has been detected or boot disk has failed". When this happenes, I have to disconnect the computer from the wall and reconnect and start over. This always fixes it so it leads me to believe it is some sort of glitch. I called HP and they told me to run a system quick and extensive check on the hard drive which i have done. Both passed and no errors reported. Another thing that will happen is that the screen will go dark, (typically after idling and when i return and move the mouse or type on keyboard, the screen never lights up again as its supposed to when it is no longer idling. It stays VERY dark and I can barely makeout the screen.  I am not sure why this is happening nor do I know what steps to take from here. I am hoping someone can suggest the next step for me or refer me to a thread that already covers thi... Read more

A:hp pavilion touchsmart 23 all in one

2 more replies
Answer Match 34.44%

I upgraded from windows8 to windows10 and now all of my touchsmart software for tm2-2150 is gone.  Where do I go to download? 

A:hp touchsmart software is gone for my tm2-215

Hi, Only available for Windows 7. Please check to see they work or not:     http://support.hp.com/us-en/drivers/selfservice/HP-TouchSmart-tm2-Notebook-PC-series/4247583/model/4... Regards.

1 more replies
Answer Match 34.44%

Upgraded to windows 10 and now unable to use convenient features I've had for years.  My touchpad is disabled, so can't just tap the pad to select what I want; my DigitalPersona fingerprint is disabled and in trying to enable it again, it appears to want to trick me to permanently delete my saved fingerprint.  How can I get these features back.  Thanks.

More replies
Answer Match 34.44%

My HP TouchSmart 610 All-in-one had a component failure and had to have a reinstall.How do I reinstall the TouchSmart software for webcam, video, photos, etc?

More replies
Answer Match 34.44%

I have an hp touchsmart iq 506 and I wanna do a dual boot by adding xp to it. but I need some explanation please if you can help me

More replies
Answer Match 34.44%

moved house recently, hooked the computer back up in the new office and the wireless keyboard worked for about 2 minutes. I changed the batteries but to no avail. Went and bought brand new batteries and again no go but the wireless mouse is still working fine. I have tried the blue connect button on the back of the keyboard but still nothing. Any ideas or suggestions

A:HP touchsmart 520 keyboard

To help you troubleshoot the issue with wireless Keyboard, please find the link given below and follow the step-by-step instructions mentioned on it:http://support.hp.com/in-en/document/c00006821#AbT1 Hope this will help you.

1 more replies
Answer Match 34.44%

I have turned on the pc and found out that there is "cpu fan not detected" f1 - boot.I was advised bybthe owner to use vaccuum cleaner to clean the fan at the bottom. It works pne time but after a while comes the same problem again. How can i solve it without opening the product?

More replies
Answer Match 34.44%

My HP touchsmart 520 pc is not booting up and I am looking for support.  Using a multi tester to test the power adapter the adapter reads 17.30v however when i plug the adapter to the computer the light above the power outlet flashes for a split second and disappears. When I unplug the adapter from the back of the computer and checks voltage it reads 0 v (zero volts) . I have to plug it out of the main source and back in so it reads 17.30v again. Once plugged into the computer it immediately drops to zero. I need help to know the source of my problem if it is the adapter or the computer.

More replies
Answer Match 34.44%

So I have a question...I am wanting to upgrade my 4GB of RAM to 8GB of RAM. I know type I need but I don't know if I need to buy another 4GB Module or if I need to buy the 8GB kit...Do the RAM Module need to be the same brand or can they be different brands and work.
 

A:Hp TouchSmart 320 Ram Upgrade

8 more replies
Answer Match 34.44%

Hi
My mother bought one of these and the keyboard broke. So I'm using the touch pad.
Problem is the more peculiar buttons like Prnt Screen and Delete went missing.
They went missing for some unknown reason as I was typing.

Does anyone have any experience with this trainwreck of a computer?
 

More replies
Answer Match 34.44%

I am experiencing with a laptop of series hp touchsmart tx2 !

The problem is that the whole view that i get on the screen is not getting loaded only half the screen is shown . I dont know what might be the error behind this ? And in case u think this might be due to i dropped my laptop or something it is definitely not . I have not dropped my laptop .

Can some please suggest to me what might be the problem ?
 

More replies
Answer Match 34.44%

Windows media center live tv works. Touchsmart live tv product of Cyberlink, comes up with a blank black screen. Seems there should be some way to e.g. sync these two programs to Touchsmart works. Any ideas are appreciated.

More replies
Answer Match 34.44%

I'm wanting to add a second screen to my Touchsmart 520 for work but i'm not sure if i can do this or how to do this.. please help.

A:Can i add a second screen to my HP Touchsmart 520

Depending on what the device is expected to do, something along this line might be what you desire.http://www.amazon.com/Plugable-Graphics-Multiple-Monitors-1920x1080/dp/B004AIJE9G/ref=sr_1_12?s=elec...

1 more replies
Answer Match 34.44%

Hi all,

I have been getting BSOD sporadically on
HP touchsmart 600 all in one pc Home premium Windows 7 64bit.

I updated the driver but nothing happened. also uninstall all unnecessary programs but nothing yet.


Last dump info:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80003090611
BCP3: FFFFF880009A9998
BCP4: FFFFF880009A91F0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\041715-20982-01.dmp
C:\Users\Admin\AppData\Local\Temp\WER-361111-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


Your help is well appreciated.

Thanks

A:HP touchsmart 600 with BSOD

I wanted to add that, this might be happening when updates are getting installed or something like that.

5 more replies
Answer Match 34.44%

I am new to the forum but a long time computer tech. I have been to the forum on various occasions for help on fixing different issues. I have to say this is a great community that helps alot of people including myself. I've ran into an issue that I believe is needing some of you guys expertise.
What I have is a touchsmart laptop from HP that the keyboard and the touchpad mouse quit working. I have searched all over the internet looking for answers and came across a few telling me to pull the battery and AC adapter to reset the computer. I've had no luck on this being a solution. I have read that booting the computer with the touchscreen facing out is what causes this issue.

So I've tried pulling the power and the battery then holding the power button in to drain any residual energy left on the CPU. And upon booting the computer keyboard will respond but only for the menu that states for starting Windows normally or in Safe mode. After letting the computer boot completely the keyboard and touchpad quits working altogether. This is booting it up in safe mode or in normal mode. The laptop is running Windows 7 Home Premium and I believe that this is my only issue. Any help or ideas on what else to troubleshoot will be greatly appreciated. Thanks in advance.
 

A:HP Touchsmart tx2-1377nr

bump
 

1 more replies
Answer Match 34.44%

Hello

My HP Touchsmart has never worked properly, Tons of problem, crashing error message etc etc. Computer was sent to HP for repair but it came back whit the same problem. I have spent hours with HP tech support running scan and making recovery with no succes. Recently I have replaced the hard drive on HP tech support recommendation. it worked for awhile but now it dosen't even boot! I don't want to call HP anymore and I wander if somebody can help me or if I should just give up.

Thanks
 

A:Trouble with HP Touchsmart

Call HP and ask to talk to a manager, then explain what's happened and the number of times you called and that you've had to send it back and demand that they replace the computer with a new one. All-in-Ones are similar to laptops, the repairs are expensive and parts are hard to get, it's best to get the manufacturer to repair or replace it especially under the warranty.
 

3 more replies
Answer Match 34.44%

I have a HP TouchSmart Computer. Since downloading updates from HP and Microsoft - my computer does not want to work - My Computer uses Vista.

It starts off fine, however as soon as I open a programme, task manager, anything - it stops says its 'not responding'. The only way out is to hold the power button in for approx. 5 secs.

I am not to up on computers, I have tried lots of things, i have had a couple of codes 0x490 and 0xc000000f - but I am not lost - I am using my old computer to put this message on here - whilst my HP TouchSmart sulks.

Any Help Please ~ Thank You in advance ~ Gail
 

More replies
Answer Match 34.44%

Hi

I have just bought one of these damaged. The screen is smashed, there is no HDD, RAM, Battery and Power Supply. It also has bad damage to one corner (been dropped from a huge height by the looks) thus damaging lid, palm rest and base. I know RAM and P/S are not a great cost issue but I'm not sure if it is worth buying a new screen and hdd for it. I paid ?42.00 for laptop as it was part of a job lot, and I see they retail at around ?500-?600. Should I fix it up to sell or keep, or just sell it as it is to see if I can make a slight profit?

A:Hp touchsmart tm2-1010ea

Forgot, obviously, not been able to check MOBO on it either yet, no spares to check it.

6 more replies
Answer Match 34.44%

My hard drive is going bad (does not recognize hard drive on startup, did have a periodic clicking noise recently but that has gone away). 1.  Is there a way to confirm if its the hard drive or controller2.  Will the recovery USB load the OS?  If so which one.  I upgraded to Windows 10. Thanks for your help.

More replies
Answer Match 34.44%

In my quest to clean out a bunch of unused programs, I found that I have HP TouchSmart Recipe Box.

After researching about this, I decided it just might be something my wife could use; however, everything I have read about it says it is for HP TouchSmart computers.

My desk-top is HP but I don't think it is a TouchSmart.

My question is, must we have a TouchSmart computer to utilize the HP TouchSmart Recipe Box ?

Thanks.
 

A:HP TouchSmart Recipe Box ???

Try these Google searches:

HP Magic Canvas
HP TouchSmart Recipe Box

What exact model of HP do you have? I find it difficult to believe it isn't a touchsmart if it came with the software. It looks like the apps can be used with a keyboard in many cases, though. See review video in your other thread.
 

1 more replies
Answer Match 34.44%

I have a currently crippled HP touchsmart 300-1003. I replaced a dead hard drive with a new 1TB HDD. I have available to me 2 sets of touchsmart recovery disks, and Windows 7 Bootable USB drive (made with win7 tool). The official recovery CDs do absolutely nothing but tell me MBR IS MISSING PRESS CTRL ALT DEL TO RESTART. The bios lists my new HDD (can tell because size is now 1000GB). I cannot choose USB drive as first boot in bios or boot order (this pc has two different menus for the same function, idky). Is there a bootdisk I can use to fixmbr? Please be so kind to provide a guide to getting a touch computer running from the begininng. All the advice online seems to be for computers that will go to a recovery screen already. If I could do that I wouldn't need the disks, lol. I would like to install the touchsmart software but will settle for any windows at this point. Thanks in advance to anyone that is able to walk me through the process.1 Hour Later: To use MSWIN7 USB Tool, I had to ENABLE BOOT DIAGNOSTIC from BIOS, power on, let the black screen read Configured 01 usb drive, ctrlaltdel, f10 to bios again, disable boot diagnostic screen, save and continue f5, then hit ESC for tiny boot menu at the HP LOGO, pick USB 2.0 as first boot. The tool started windows as Repair (which I followed MSguide for bootsec and /fixmbr, no clue if that fixed mbr tho) and Install Windows 7. I picked install. More updates to come.

A:HP Touchsmart 300-1003

hi i would download a hdd utility from the maker of the harddrive ,burn it to cd ,usually instruction on ther sitr on how to do this ,to setup harddrive for first time use,it may just need to be formatted to create that mbr that seems to be missing .
burn it to cd ,usually instruction on ther sitr on how to do this ,,
a list of links to most makers can be found on bleepingcomputers i thought but i couldn't fine i ,i will post this site with links to most makers .good luck
http://www.tacktech.com/display.cfm?ttid=287

5 more replies
Answer Match 34.44%

Hi, The LCD on my Touchsmart 11 has failed. It was flickering vertical lines for a while and has now died completely. The HDMI output still works. The laptop is out of warranty. How can I send this back to HP for repair and any idea of cost? Thanks, David

More replies
Answer Match 34.44%

Hello I have a touchsmart 300 and it has no sound from the speakers or headphone jack. I have tried the troubleshoot thing and it dont recognize anything wrong with them. please help. ive tried updating the driver and it says it is updated. so lost. thanks.
 

A:Touchsmart 300 no sound

Did your pc have working sound when new?
Check the volume level, it's easy to turn it right down or mute it.
Check if the speakers are selected by going to the speaker icon in tray near the current time.
Right click on speaker icon, choose 'playback devices'.
A new box appears, with a speaker and it should have a green tick over it.
Right click on the icon and choose the option 'test', you should hear audio tones.
If you don't have a green tick, right click on icon and choose 'enable'.
 

1 more replies
Answer Match 34.44%

I am attempting to repair an HP Touchsmart 300-100.....system fires up....no screen but fans are going like crazy....replaced CPU.....no difference !.....HDD light doesnt light up but you can feel the HDD running if you touch it !.....Motherboard failure ?
 

A:HP Touchsmart 300-1000

Is it actually a 300-1015uk(VG254AA) or a 300-1025uk(VG255AA) HP TouchSmart model?

Screen Is Blank After Starting Computer

----------------------------------------------------------
 

2 more replies
Answer Match 34.44%

I've got a TouchSmart 610-1280qd desktop. It was working fine until 1 week ago when my home had a power outage. Now, it won't even boot up. No power, nothing. Even the power brick light is out. I bought a replacement power brick and when I plug it in, the green led light on the new brick(the old is blue) immediately goes out and there's still no power. The power button effects no response, nor does any button on the keyboard have any effect. There's just no power to the entire computer. I've tried plugging both the old and new power bricks in and initially, the blue and green lights on each respectively go on, until I plug them into the desktop.  Then the lights go out and still no power and no response by pressing the power button or any button on the keyboard. I've also tried plugging in the old and new power bricks without the surge protector. The power bricks lights go on, but as soon as I plug them in, still no power. I've tried different outlets around my house and the power bricks lights go on, but as soon as I plug them into the desktop, no power. I've tried plugging he power bricks into the desktop first, then the outlets, and no power at all either in the desktop. There is no response at any stage where i've pressed the keyboards buttons. The desktop just doesn't have any power at all.   Anyone have a problem with this? I really hope it isn't what I think it is and the motherboard is out.      &nb... Read more

A:Touchsmart 610 no power

Hi there @MrJimCee1, Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that your computer is not starting properly and does not appear to be getting power. I am happy to help with this.  I recommend that you look at this document: HP PCs - Computer Does Not Start (Windows 7). For your purposes you are probably going to have to do Step 1 and then in Step 2, the first section "The computer does not turn on".  If after finishing Step 2 there is a change, and the computer is getting power let me know if there is still an issue I can help  you with, if it still does not receive power, then you should contact phone support. Please use the following http://www.hp.com/contacthp and create a case for your issue and contact HP. If you live outside the US/Canada, please click the link below to get the contact information for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Let me know how that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

1 more replies
Answer Match 34.44%

I have been dealing with a broken home on my laptop for more than a year. I just searched these forums and found ~70 posts all with the same issue. This seems to be due to poor design that never should have made it past the quality assurance engineers, having a metal hinge screwed into non-reinforced plastic. I find it reprehensible that a premium laptop was made so poorly. I am told by local PC repair shops that it will cost me $400+ to get this fixed. That's 1/3 what I paid for the machine in the first place.I tried calling support and was directed to log onto the support site for assistance, from which I was directed to search the forums. I thought HP made better products than this, but hadn't wanted to put up the money to get one to find out. Then I bit the bullet and got rewarded with a busted hinge on a laptop that spends its days being used by my wife at home, bring opened and closed 2-3 times per day. And now it seems like I'm going to get the runaround to get this fixed, or just have to trash an otherwise great machine due to crappy hinges. I love this laptop as far as performance and hardware specs go but it is a pain to open and close to try and avoid breaking the other hinge and essentially removing the screen.Any guidance on what I can do to get an actual answer or a case submitted to get any useful help?

More replies
Answer Match 34.44%

Hi, I need to purchase a new motherboard for my TouchSmart 610.  I've opened up the computer and found that the motherboard installed in the computer is model number DA0ZN8MB6I0 (Part number 648511-001).  While trying to find a place to purchase this mother board, I see that is motherboard is fairly expensive.  While searhing I also found another motherboard, model number DA0ZN9MB6H0 (Part number 648512-001), which is also used in the TouchSmart 610.  Visually this motherboard looks the same at the orignal motherboard and is significanly cheaper.  The part numbers differ by only one digit (before the revisoin number, 001), which makes me think that the two motherboards are very similar. Does anyone know if these two motehrboard are compatiable/interchangeable?  Where can I get information on the difference between these two motherboards? My motherboard has a built in video cards, does anyone know if the second motehrboard does as well?  or will I need to purchase a seperate video card if I were to purchase that motherbaord? Thanks for the help.

More replies
Answer Match 34.44%

I have an HP Envy20 AiO touchsmart pc and just installed win 10 and it has been working fine and I restarted it today and the power button lights and the fan goes but the screen remains black. I can use my mouse but not my keyboard and every few minutes it sleeps numerous times for seconds then comes back yet the screen stays dark.

More replies
Answer Match 34.02%

I bout this iq500 second hand nearly a week ago, it already had installed windows 10( not sure what original was/is), ive reset back to factory settings and everytimes it goes to start back up... It does its loading thing then get to a blue screen that say's,Hello there!Lets get a few basic things out of the way.And then it has scroll down options well thing is the touchscreen wont let me click any option and the mouse and keyboard i have plugged in wont let me click options ... It was fine before i reset pc but it was a little slow hence reason for doing it... Ive been wrecking my brain and googling forums to try find out how to fix but i cant find info about my problem anywhere....Any help will be muchly appreciated!Many thanks

More replies
Answer Match 34.02%

hello.it's been 2 years since i use this pc and it works just well,but today,when i turned on the pc it can't boot. It just turned on,but the screen show nothing,and when i say nothing i mean really really just like it doesn't get turned on. i tried to push the DVD button and it is still working,the light on the power button also work,and everytime i tried to turned it on and off the sound of the pc turned on still can be heard. so its just like everything is ok but the computer isn't booting.ussually before this happened,it took only 3 seconds after i turned on the pc,to boot into the loading screen,but now it does nothing.one day before,i upgraded to windows 10. and it is still working,the next day it is also still working,then i shut it down. the next time i tried it(ijust about 15 minutes i turned it off ,it won't boot. ) i don't know if this is related,but in the internet people said that things like this happened because of the hardware and not the software.please help me,i really need this pc to get back to work thank you,and sorry for my bad english

A:HP Envy 23 touchsmart won't boot

@adrian_sts?
 
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.Thank you for visiting the HP Support Forum.

9 more replies
Answer Match 34.02%

HP TouchSmart IQ500 not loading Windows Vista.  Turn on PC from cold boot and it goes to HP - Intel blue screen.  Options are: F10 - SETUPESC. - BOOT MENUF11 - SYSTEM RECOVERYF9 - DIAGNOSTICSV5.02 (not an option, obviously, but thought I'd add it) I've tried all the bottons and none get me anytwhere.  Pressing F10, it says that it's loading setup, but it'll say that for several hours and never actually do anything.  Pressing Esc., it says that it's loading boot menu, but it'll say that for several hours and never actually do anything.  F11 and F9 don't do anything whatsoever. This is a friends computer that I'm tryin' to figure it out for him for cheap/no cost.  I had no idea it was this kind of computer and I've never even actually seen one in person.  I thought it was a normal desktop PC with a tower and everything.  lol A little history...He bought the PC about a couple years ago for about $1,200.  Just uses it for e-mail, YouTube, and Facebook.  He and his wife really don't know anything about computers other than how to use a few simple programs and use the Internet. He said that he and his wife shut down the PC whenever it's not in use.  They turn it back on and it automatically goes to the Windows user login screen, but it's booting to this screen now for some reason.  He said that nothing's changed in the whole time he's owned it except for a few weeks ago he upgraded his Internet speed.&n... Read more

A:HP TouchSmart IQ500 not working

Hi,If you have Vista installed, this process will allow you to make a Vista Repair Disc. This is not an installation disc but will allow you to use the Vista Recovery Console that is available on retail versions of Vista.Download the file on the link below.  Make sure you download the correct version. Vista 32 bit Vista 64 bit This is a zipped file.  If you don't have an extraction utility installed, download and install 7-Zip which can be used to open this file.  Simply right click the zipped file, select 7-Zip, select Extract Files and then click Ok.  You should now see another folder containing the ISO file.You will need software to burn the ISO to a CD.  If you don't have this type on software installed, download and install ImgBurn and use this to burn the ISO to a CD.Once you have created the Vista Repair Disc, follow the guide on the link below to see if this will repair your installation. http://www.bleepingcomputer.com/tutorials/tutorial148.html#Best wishes,DP-K

9 more replies
Answer Match 34.02%

reinstalled windows 7 and upgraded to windows 10, now the pc will not start. only black scree with thehp logo appears. also the cooling system works very badly. Please give some hope, I invested 1200$ and big faith when I bought this laptop, butit has been nothing more that disappointment. I hope HP company reads this, and contacts me. Thanks

More replies
Answer Match 34.02%

our HP TouchSmart 23 All-in-one was working fine until this morning. Now the screen appears to be in a constant refresh mode. It is not usable. I can see parts of the windows display but that flicker off but mostly just colors and patterns.  I don't even know where to start troubeshooting this. HP says it is not under warranty. If I try to boot from another device (CD or thumd drive) I get the same thing. I unplugged the keyboard and even the screen that show the keyboard error was flashing and scrolling to the point of almost being unreadable.  Thanks in advance! 

More replies
Answer Match 34.02%

Hi!
I have a very interesting problem on my hands. I've had this PC for over 2 to 3 years without any hardware problems.
But one day I was using it like I usually do, no problems at all, when the monitor suddenly flicked off. I moved the mouse around and pressed keys on the keyboard but nothing happened. I waited thinking that it was maybe just updates doing what it needs to do, but after quite a while I knew something was wrong.
I pressed and held the on/off button to shut it down manually and started it up again. The HP screen came up as usual but there were some weird dotted designs across the screen. Then it went black with bigger green lines across the screen for about 3 seconds then went to the windows Vista loading screen. Well, again there were weird lines across the screen but they were white.
After about 30 seconds the screen goes blank and either stayed like that or after a while went to a blue screen.
It restarted and I had the option do an automatic fix from Windows but that failed numerous times.
I hated to do it but I couldn't think of any other way so I tried to restore it to it's factory settings. That was also a no-go so I figure it must be a hardware problem...

Has anything like this happened to anyone but me?
Can anyone think of what hardware might be causing the problem? I have a friend that says something a little similar happened to his laptop and found out that his motherboard was fried... =-/

Any feedback would be greatly ... Read more

A:Problems with HP TouchSmart All-In-One IQ770

These are the specs of your system?

Dots/green lines probably mean that graphic chip on that machine is malfunctioning. HP offers 3 years 'parts' warranty on some lines, I have no idea whether your system's age is below 3 years or not from your statement.
 

1 more replies
Answer Match 34.02%

I upgraded my TM2T to Windows 10 and I love it. About a month or 2 ago I had to reset my PC and Windows 10 deleted my touchsmart software (Which was working fine before the reset) I have been looking high and low for the place to download. I looked up my computer on the support site and it isn't listed under my laptop just bump top. Any help is appreciatedThanks much!

More replies
Answer Match 34.02%

How can i make my  HP Pavilion 10 TOUCHSMART 10-e010nr notebook/pc run faster. I have 2 gb of ram  320 gig harddrive. can i addmore ram.

More replies
Answer Match 34.02%

I also have an HP laptop with a loose or broken left hinge.  Bought it through the HP website.  How do I get this fixed before it breaks the whole computer?  Thanks!

More replies
Answer Match 34.02%

Same problem as some of the others with touch screen not responding.  It works part of the time and then stops. BUT this is the weird part...  if I press control/alt/delete and select Task Manager then select "X" to close the box (without doing anything), the touch screen will work again.  It used to work for a day or two at a time.  Now I have to do the Task Manager thing about every 10-15 minutes.  It's driving me nuts!!  At most I have my email and maybe 2-3 browser tabs open.  I am in no way a techie person.  If someone could help me using plain English that would be wonderful. Or tell me this thing is dying and I need a new one.  Help, please!! Product E1P04AVModel 15t-i100

More replies
Answer Match 34.02%

I have an AMD Radeon HD 7650A Graphics card and seem to have a driver issue with windows 10.  I keep getting the following error message:  No AMD Graphics driver is installed, or the AMD driver is not functioning properly.  Please install the AMD driver appropriate for your AMD hardware. I have installed a new driver (from the AMD website) - still had the same problem.I next performed a complete clean installation (uninstalled everything then reinstalled it)  - still had the same problem.I have even tried a system reset - but it won't let me do that either. A friend told me that only the drivers from the HP website would work - i have looked for them but you don't seem to have the drivers for windows 10.  I upgraded to windows 10 when the OS first came out and it worked fine up until this graphics card issue started about a month ago. How do i solve this problem (please explain as if you were dealing with a small child - eg. in very simple, easy to follow steps)?

More replies
Answer Match 34.02%

It's been a while since I bought the HP Touchsmart 600-1350. Recently I took it out and restore it to its oringinal state. However, It's still kind of slow so I decide to do a little research about upgrading this fossil.  So far, I noticed that the i3 m370 cpu @2.40GHz can be upgraded, so does RAM (4GB to 8GB with Win 7 64 bit). What about the graphics? This HP Touchsmart 600-1350 has a intel HD graphic which has only 64MB. I saw a lot people are saying that GT 230M can be installed since there is a PCIe (MXM 2.0) socket available. Is that true? do I need to install cooling as well, or just plug it in and play? Is there any other model of graphic cards that are compatible? Thanks

More replies
Answer Match 34.02%

When I push power button power led goes on, nothing happens on screen, stays blank. DVD is seems to be working, when I push eject button, could hear whirring sound and tried with disc, it goes in and out and spinning up. Fan is starting to spin up for a second or less then stops. No sign of HDD spinning up. Tried USB ports with a mouse, when I plug in it lights up for a sec then goes off. All ports are doing the same including side and back ones. Removed the back panel and deattach and reattached memory modules. Tried to move the connectors little bit, but no success.Seems to be a HW failure but not sure. Any idea?

A:Touchsmart 610-1280qd not starting up

Did you get any answers on this? I seem to be having the exact same problem.

1 more replies
Answer Match 34.02%

Hi there... I have been having this issue for quite some time now, where my Touchsmart just turns off at random times.  I have tried to find some advice online for ideas to resolve it - have bought a new power supply yesterday, which didn't solve the issue.  The next step in my view would be to take it apart and replace the fan(s) in case it's overheating.  On first boot, the computer will stay on for about 30 mins, then shut off.  On trying to boot back up, sometimes it won't even get to Windows screen before shutting off - hence my feeling it's an overheating problem.  Would someone have a service manual on this model?  And would anyone know how many fan's there are in this model? Thanks!Cam

More replies
Answer Match 34.02%

How can update supports((( UEFI)))my sYstem windows 10 HP TouchSmart 600-1160me Desktop PCModel number#: 600-1160meproduct number#: WC763AA-A2N BUILDRD  AMIMEV6PRA2

More replies
Answer Match 34.02%

hp touchsmart 310-1125y won't turn on. It's plugged in & the adapter lights up, so does the light behind the monitor. Power button won't light up or flash.Any solutions? Thanks.Model: http://support.hp.com/us-en/product/HP-TouchSmart-300-Desktop-PC-series/4348689/model/5109363/

More replies
Answer Match 34.02%

Hi, is it possible to change the ]HDD on HP TOUCHSMART 4-1202ea to an SSD?

A:Can I Change a HDD to SSD on a HP Touchsmart 4 4-1202ea

Hi and Welcome to TSF!

The work and effort of finding the correct SSD isn't worth it as the HDD will already be fast enough.

2 more replies
Answer Match 34.02%

Dear All

I would be greatful to have someone supporting me on installing XP on HP Touchsmart TM2 2090ee.

HP website says that it support only windows 7. Although I tried to find out the Chipset and find out the SATA Driver for F6 (floppy disk) option while installing windows xp.

Please help! Thanks in Advance.

A:Installing XP on HP Touchsmart TM2 2090ee

Hi..

Please help if anybody can.

Thanks

6 more replies
Answer Match 34.02%

I upgraded my TM2T to Windows 10 and I love it. About a month or 2 ago I had to reset my PC and Windows 10 deleted my touchsmart software (Which was working fine before the reset) I have been looking high and low for the place to download. I looked up my computer on the support site and it isn't listed under my laptop just bump top. Any help is appreciatedThanks much!

More replies
Answer Match 34.02%

I've tried everything I can find on the forums, but nothing will make the brightness adjustments work - can anyone help? The brightness slider does nothing - HP are rapidly driving me mad!

More replies
Answer Match 34.02%

Greetings,    I have owned this laptop for over 2 years and have encountered many problems which have required me to open up my laptop and remove debree/dust from the interior. My last adventure included removing the fan and heatsink from the inside, but when I assembled the laptop back together it will not start up. When plugged in the white led light still shows next the the charger socket, but the power button will not light up after several tries. The fan does not start to spin either.   I have tried the hold the power for 1 minute idea, but it does not change anything.I have 3 possible conclusion that are very unlikly to me.1.  I worked on carpet and had static  electrickery! Doubt it.2. The harddrive is not working properly3. The memory is not working properlyAny fixes to these above? any other possible causes?  

More replies
Answer Match 34.02%

HP Envy Touchsmart M6 Sleekbook turned off suddenly and won't boot now.   Power and WiFi light for a few seconds and then nothing, will not actually power on.  Following some related posts I openned it, unplugged battery, plugged in wall and tried to power on. The same lights come on, the power button and wi if for a couple of seconds and nothing. This time though the fan did come on, or at least it sounds like a fan, it's a whisper fan so it was always unnoticeable.Is is there something else I can try? Desperate....  

More replies
Answer Match 34.02%

I've had my Touchsmart for 2 or 3 years now and have always used it with Google Photos (Picasa) to edit and upload. I initially used a Canon EOS 400D and a couple of years ago upgraded to a 7D. All have been working fine.

Last week I returned from holiday with around 1,000 photos on my camera and plugged the cable from my Touchsmart into the camera as normal, but, it didn't recognise the camera. It did make the little noise that a device makes when plugging something into a USB port, but would not see the camera. I looked in device manager to see if any flags were showing ofr USB issues, none were.

I restarted the Touchsmart, still the same. I removed the two external HDD's so that the camera was the only thing connected, still the same , I tried the cable from the camera in all 6 USB ports, the same. I tried another cable, the same. I then tried a card reader with the CF card in it, initially the same. Then I had odd problems with the PC recognising it as an external drive but showing some odd characters in the view, but as soon as I tried to access it the drive disappeared.

I looked to see if there was a specific driver for the 7D but there was not, so I downloaded the Canon EOS utility s/w and tried to see if that recognised the camera but it didn't.

I then popped the CF card back into the camera to find that the camera was now showing the card as blank; you can imagine how I felt thinking that I'd lost 7 days of holiday photos! I tried it back on the Touchsmart a... Read more

A:Camera not recognised on HP Touchsmart

Hello and welcome botty mate have you tried using a different cable to plug the camera into the machine. Now I ask because maybe the port/s you are plugging it into may not be making very good contact at the connection.

The other suggestion I might make is to use an adaptor to plug that card into the machine much the same way as I do with the SD cards I use with my cameras. this would avoid having to lug the camera in at all and avoid anything glitches that are or maybe going on between camera and machine.

From experience most of the large manufacturers ie HP and as recently with myself - Asus the support is pretty weak if and when you can get through.

Just for the record a Google shows me this type of card is now quite old and I am sure an SD one would be better if it fits because as you say as soon as you plug that card into the machine it goes blank for what reason I am not sure.

Now you could try running these just in case the Windows system is out of whack
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html
http://www.sevenforums.com/tutorials/433-disk-check.html < if necessary include the /f and /r in the command line as per Option2

now if those do no good then run these - just in case because at very least they will eliminate a few things and take no time to run

http://www.superantispyware.com/
http://www.malwarebytes.org/products/malwarebytes_free/
http://www.bleepingcomputer.com/download/adwcleaner/
ADW download f... Read more

4 more replies
Answer Match 34.02%

I put my cable wire from a three way splitter which is connected to my cable box and my tv without cable box ( bothe work but computer doesnt)

I scan for channel on my tv tuner card cant pick up my time warner cable queens and only pick up 6 channels then find 254channel which there is a lock on it and when unlock no service.

What can i do to make this work if the tv tuner card is ditiagl and antolag

More replies
Answer Match 34.02%

Hi Recently had comupter wiped due to disk error.  Now powers up but goes no further.  Cannot get into BIOS or get any further. Just blank screen and fan/light is on Tried booting from USB and DVD to reinstall windows but no joy. All I really want to do is get running again with any O/S.  I have most of my data secured and expect to lose the rest

More replies
Answer Match 34.02%

Hello everyone. I have a so called hybrid laptop HP Pavilion Touchsmart 11-n010dx. It has Windows 8.1 pre installed and I don't like it that much. So I decided to downgrade to Windows 7 Home Premium x64 and faced some problems. I've done Windows installation plenty of times before and that is the first time when it's so tricky. First of all the laptop doesn't have an optical drive so I'm using a flash drive. I set UEFI BIOS to a necessary settings (disabled Secure Boot, enabled Legacy Support). I'm using a 2.0 USB port so that is not a problem. The problem is while installing a message shows up that I need a CD/DVD driver. I made some research and decided that I need motherboard or chipset drivers. I tried it - no result. I think I've tried everything but maybe you guys can help me. Thank you in advance and I hope you'll have some ideas concerning my issue.

A:Can't downgrade from Windows 8 on HP Touchsmart 11

Quote:
It has Windows 8.1 pre installed and I don't like it that much. So I decided to downgrade to Windows 7 Home Premium x64


YES & NO, down to your UEFI/BIOS firmware settings.

1) Downgrade to Windows 7.
Downgrade Windows 8 to Windows 7
Warning you must have the UEFI/BIOS firmware setting in Step Three set.

Make sure you read the NOTE at Step three.

2) If Using a USB Pen drive on a PC with a UEFI BIOS.
USB Pen drive need to be formatted to FAT32 as in
UEFI Bootable USB Flash Drive - Create in Windows
Take note of Step 11 for Windows 7.
Also you will need to use a USB 2.0 port, as there are no USB 3.0 drivers in Windows 7.


You will need to buy Windows 7 x64 DVD & product key.

2 more replies
Answer Match 34.02%

I upgraded my TM2T to Windows 10 and I love it. About a month or 2 ago I had to reset my PC and Windows 10 deleted my touchsmart software (Which was working fine before the reset) I have been looking high and low for the place to download. I looked up my computer on the support site and it isn't listed under my laptop just bump top. Any help is appreciatedThanks much!

More replies
Answer Match 34.02%

How to take a screenshot using Hp TouchSmart Tm2 notebook PC

More replies
Answer Match 34.02%

I'm searching to upgrade memory. It states on HP Dual channel memory architectureTwo DDR3 SO-DIMMs (200-pin) socketsPC3-8500 (DDR3-1066)PC3-10600 (DDR3-1333)                I have searched online 2x 4gb ram in this spec. I ran the sanner on the crucial website which came up with Crucial 4GB DDR3L-1600 SODIMM CT3303755  Brand: CrucialForm Factor: SODIMMTotal Capacity: 4GBWarranty: Limited LifetimeSpecs: DDR3L PC3L-12800 ? CL=11 ? Unbuffered ? NON-ECC ? DDR3L-1600 ? 1.35V ?Series: Crucialview all product detailsupgrade for HP - Compaq TouchSmart 520-1070uk system.         Is this compatible? As I heard this was in fact 204 pin?  

A:HP TouchSmart 520-1070 Desktop ram

Interesting.  I had heard about the 200 pin variants of memory modules present on some DDR2 and DDR3 modules but have not encountered them. There have indeed been errors in publishing specifications on the HP support website. I have never heard of Crucial making such an error. If Crucial states their module for the PC is guaranteed compatible, you should be able to take it as a fact, since their reputation as a maker of memory modules is on the line. UPdate: It is definitely an HP mistake. I just read on the support document that the memory for your motherboard has 240 pins and I know that is definitely inaccurate. See the following document on the memory upgrade sectionb.http://support.hp.com/us-en/document/c04351363

1 more replies
Answer Match 34.02%

HP Touchsmart 300

A:HP Touchsmart 300 not loading disc

Hello monroe18:           You should know by now that we need your computers information especially for trouble shutting issues like this. Please post your computers information just exactly like my example: Hp Touchsmart 600-1050 Windows 7 Ultimate 64 bit Touchsmart Software version 3. What disk drive you are having issue with. C drive. D Drive (Factory Image) E Drive  CD/ DVD rom. (Optical Drive)  or USB ports using USB  scan disks?  Thank you frrw. It will help us greatly in helping you fix your issue. What type of disk you are trying to open up? DVD, Software Disk or CDR.

5 more replies
Answer Match 34.02%

I shut down my desktop earlier this morning with the normal power off process. When I went to turn it back on this evening all I get is a set of 5 beep with a yellow light blinking above the power switch. This repeats five times then the beeping stops and only the yellow flashing continues. I can hear and feel the hard drive running. I've tried disconnecting the power and then plugging it back in but the same thing happens. If I push and hold in on the power button in, it sounds as if the hard drive stops and restarts. The normal blue light comes on for a few seconds then goes out and is replaced by the blinking yellow light. Anybody got any clue as to what the issue may be?

More replies
Answer Match 34.02%

Does anyone know if it is possible to download a copy of restoremgr.exe for and HP TouchSmart 600-1050? Mine was lost during an aborted attempt to load Windows 8 Pro. All my restore files are still on my hard drive in the Factory_Image partition except the executable restoremgr.exe.
 

A:HP TouchSmart 600-1050 Restore Mgr

8 more replies