Tech Problem Aggregator

Microsoft Word 2003 numbered list?

Q: Microsoft Word 2003 numbered list?

Hi im trying to do a numbered list in word, which I know how to do, but i need to do a subsection in a couple of them ie: 2.a & 2.b etc. anyone know how to do this?

thanks

Answer Match 108.78%

hey guys, I have a document that has a numbered list that goes over 1000, when it reaches 1000 the gap between the number and the text goes a lot bigger.. anyone know why this happens? and if there is a way to change it?

many thanks

Eddie.
 

A:Microsoft Office 2003 Numbered List Problem

well when you get to 1000 i think Word is adjusting Left, & Hanging/First Line Indentation ...... e.g. when you start from number 1 .... Word usually sets to Left = 0.25, Hanging/First Line 0.25.

You can adjust it according to your needs by changing those values. Goodluck
 

1 more replies
Answer Match 108.36%

Hi there!
For years I have used a keyboard shortcut for my numbered lists for "Format Number Default". I had it set so that my numbered lists were flush with the left margin rather than indented. For the past few weeks, when I use the shortcut, the list indents and I have to click Format, Numbering, and then the template I want to use. I have tried resetting the keyboard shortcut in the normal.dot, but this did not work. Is there a way to change the numbered list defaut? Any help would be greatly appreciated!
Thanks in advance!
Miki
 

A:Solved: Word 2003 default numbered list problem

Only way I know is highlight text, click on the numbering tab and then while text is still highlighted decrease indent
Or if text not inserted yet enter 1. Then write the first numbered lot of text press enter, when 2. Comes up, highlight up to next line where the 2. Has been auto placed, and click on decrease indent, the rest of the text will go to the left margin

Might be an easier way I don’t know but that is how I do it if I want to change the location of the margin of the numbers, its still quick,

I have never been one to use keyboard short cuts as you get used to them, then the keys wear out and dont work, or you have to reformat and reset everything again till and you have to look up again how you set it in the first place and then because you have used the keyboard short cut so long you can not remember in the program where to go as to how you do it and you have to know till you sort out the keyboard again.
Beanie
 

3 more replies
Answer Match 90.72%

I want to create a list as follows:

1.
3.
5.
7.
9.

but I don't want to have to do this manually! Why the heck doesn't ms word come with such a basic feature? I am so suprised by the lack of support for this on the web as well. All I found were shoddy explanations of how to use input fields and SEQ that did absolutely nothing but waste an hour of my time. GRRR (sorry its very frustrating)

Please help!
 

A:ODD numbered list in ms word??????? PLZ HELP!

I agree word sucks with this. It is so esy in Excel why not word? Anyway have look at this article ...
http://www.word.mvps.org/FAQs/Numbering/ListRestartFromStyle.htm

Hope this helps
 

1 more replies
Answer Match 88.62%

Does anyone know how to turn this off?
 

A:Word 2007, arrow after numbered list?

Read the article here:
http://www.officearticles.com/word/show-hide_button_in_microsoft_word.htm

It'll explain everything for you.
 

3 more replies
Answer Match 74.76%

i just went from windows 2000 to windows 7 professional and we had to reinstall all programs....
problem:
i need to open my company logo which was saved in microsoft office word 97-2003 - my new program is microsoft works word processor - i have tried saving it in different formats on my old computer but nothing seems to be working....
any suggestions?
 

A:Converting files from Microsoft Office Word 97-2003 to Microsoft Works Word Processor

6 more replies
Answer Match 73.5%

I have a number of standard letters which require a dropdown box to be populated with a list of over 25 names.

When thinking this through, I figured that it would be best (due to restrictions on the network so I'm unable to use an access database) to produce this list in Excel 2003. Along with corresponding lists of email and telephone numbers.

Unfortunately I'm finding it very difficult to get the information onto the dropdown.

So far the code I have is:
Private Sub UserForm_Click()

'Define Variables
Dim xlNames As Excel.Workbook
Dim rsNames As Recordset
Dim cmbNames As ComboBox
Dim i As Integer
Dim SocServs As Worksheet

'open the spreadsheet to access the information
Set xlNames = Excel.Workbooks.Open("C:\Documents and Settings\00772367\My Documents\SocServs.xls")
'set up and activate the appropriate worksheet
Set SocServs = xlNames.Application.Sheets("SocServs")
SocServs.Activate

'retrieve the information from the named column in the spreadsheet
Set rsNames = SocServs.Columns(1, 1)
i = 0

With rsNames
' This code populates the combo box with the values
' in the Names column of that there spreadsheet (I fervently hope).

Do Until .EOF
cmbNames.AddItem (i)
cmbNames.Column(0, i) = .Fields("Names")
.Next
i = i + 1
Loop

End With
End Sub
There's a few errors in there, which I can't seem to surmount. The coding doesn't seem to recognise the fact that I've got a named range in t... Read more

A:Populate a dropdown box in Word 2003 from a list in Excel 2003

Is there any particular reason why you are needing to do this using VBA? You can populate a cell with your multiple choice options using Excel's built in Data Validation feature. Simply select the cell you want the options to appear in and click DATA --> VALIDATION and then select "ALLOW LIST" from the options. Then select the range of cells that contains your list of names.

Regards,
Rollin
 

2 more replies
Answer Match 70.98%

I have created in Microsoft Word 2003 on an XP OS some lengthy documents. I created them using a view setting of 150%.

I sent them to my employer, who is using Windows 98 and Microsoft Word 97. My boss opened them with his system and they displayed on the screen at a view of 200%. He wants me to send him Word documents that he can open from the CD-R that I send that will automatically display at 100% view on the screen so that he does not have to set the view for each document as it displays.

So what is the answer.

Is there a way that I can save my created documents so that when my boss gets them on a CD-R that they will open on his system at a view setting of 100%.

Is there also a way that his system can be set to default to 100% in reading from the CD-R.

My boss does not want to copy the documents to the system hard disk from my sent CD-R, preferring to read and copy directly from the CD-R that I send, so that the original documents will not accidentally be changed.

Any help would be appreciated.

A:Microsoft Word 2003 To Microsoft Word 97 View Setting

Welcome to BCWhat if he were to download Word 2003 Viewer?Mark

1 more replies
Answer Match 68.88%

Hi,

Here is a peculiar problem I am facing right now. I am trying to create a numbered list (specifically, a procedure describing an upgrade process for an application). In one of the steps, I insert a cross-reference as a part of the sentence describing the sub-task. The cross-reference jumps to the next step in the numbered list on its own.

For example, I say

1. Create a backup of your database. For more information, see Creating backup of your database. (this is the cross-reference to the heading of a section).

When I save the document, this is what happens:
1. Create a backup of your database. For more information, see
2. Creating backup of your database. (this is the cross-reference to the heading of a section).

Why does this happen? Please let me know.

-Amruta
 

A:Cross-reference in a numbered list

I forgot to add, I am using Microsoft Word 2007.
 

1 more replies
Answer Match 68.46%

Am using Word 2007 in compatibility mode.

I want a list box in a word document that has 3 fixed values.....Hot Cold Warn

Want them in a drop down box so a user can pick one with a mouse click. The document they are in will be printed - so the value needn't go anywhere.

Ive tried adding the Legacy Drop Down Form Field and the ActiveX Combo Box..but cannot - for the life of me - populate the box.

This has to be simple.....appreciate any help. Thanks.
 

A:Populate a List Box in Word 2003

11 more replies
Answer Match 68.04%

WHAT I NEED:
A functioning Numbered list style that when applied to multiple sections of text allows each section to be a new list whose numbering starts at ONE.
WHAT I HAVE:
A numbered list style based on the built in style "List Number" that when applied the first time creates a normal numbered list, when applied to a second section of text makes another list continuous with the first in the numbering.

If it were in a document it would look like this:

1.0 CHAPTER OUTLINE HEADING - THE NUMBERING PROBLEM
1.1 SECTION ONE - WHEN IT WORKS
The following items are included in concept XYZ:​1. first, one​2. second, two​3. third, three​
The following items are included in concept LMNOP:​1. first, one​2. second, two​3. third, three​

1.2 SECTION TWO - WHEN IT DOESN'T
The following items are included in concept XYZ:​1. first, one​2. second, two​3. third, three​
The following items are included in concept LMNOP:​4. first, should be one​5. second, should be two​6. third, should be three​


My template already has all the outline level styles created and fucntioning correctly. I just want to finish the template with a numbered list style that works the way it usually does when you click the numbered list icon in the normal template!

If I select "restart numbering" after clicking on the #4 shown above and then push ctrl-z, it will restart the numbering temporari... Read more

More replies
Answer Match 68.04%

I have Microsoft Office 2003 installed and also the Microsoft Office Compatibility Pack 2007. However, when I receive an e-mail with a Microsoft Word 2007 attachment, the document will not open even with the Compatibility Pack installed. I can not convert .docx to .doc. Any advice please?
 

A:Microsoft Outlook 2003 - Attachments in Microsoft Word 2007 will not open

Hi again,

Anybody able to help me with this please?
 

3 more replies
Answer Match 67.62%

I completed a mail merge using 2003 & creating a list -- If I wanted to print just the list of names & address database associated with the merge letter -- how do I do that?? It looks to be a .mdb extention, but I can't seem to locate it on it's own!!

For the life of me, I can't figure it out! I think I preferred the old mail merge - when you had to create two seperate files! Seemed less confusing somehow!
 

A:Mail Merge (Word 2003) name list

A .mdb is an access file. Do a search and then use access to open it.

That should work out for you.
 

1 more replies
Answer Match 67.2%

does anybody know the hotkey for bullet points and numbered list?

like the hotkey to open is crtl-o but i dont know what it is for the above.

many thanks.
 

A:hotkey/shortcut for bullet points and numbered list

6 more replies
Answer Match 66.78%

Using Office Professional 2003.

Everyday I change to The Recent File List Default from 4 to 9 in Word 2003 . I shut down my computer every night and every am I notice the Word has reverted back to the Default.
I have also tried to remove User Option by going to Tools Options etc and no way will it accept my change.

I am using XP Home and I formatted my Hard Drive in December so this is a fairly new install of my Office Professional.
 

More replies
Answer Match 66.78%

In my Word 2003 program, when I click on File/New, on the right hand side of the window it lists four "Recently Used" templates. Three of these four refer to layouts of my letterheads of my previous home address, so are no longer of use. If I click on any of them, I get the error message "Word is unable to read this document, it may be corrupt". As I obviously have no further use for these three, (they having been deleted) I wonder if there is a way that I can remove them from that list of "Recently Use Templates", therefore only showing my current one. Thanks for any help.
 

A:Remove list of recently used templates in Word 2003

Been a while since I used the 2003 version of Word. Can't you simply right-click on those items and select Delete?
 

2 more replies
Answer Match 66.78%

Hi Everyone!

I am having trouble with my thesis template I was given - I am using Word 2003.

I am using the Heading 1, Heading 2, etc. styles for my chapters and sub section titles. My first chapter numbers them fine, for example (Heading 1 style being the chapter title, Heading 2 style being the Sub sections):

Chapter 1 title

1.1 Sub section one

.....

1.2 Sub section two

etc..

However, when I get to chapters after chapter 1, it does not format the way I want. For example

Chapter 2 title

1.3 Sub section one

.....

1.4 Sub section two

etc...

It does not restart the Heading 2 style to 2.1 and 2.2... it just continues on from the last sub section in the previous chapter. How do I get it to start at 2.1?

I know if I format the Chapter 2 as a numbered list it will number correctly (for example, "2. Chapter 1 title") but that "2." is against formatting standards in my thesis and soon as I delete the "2.", it changes the Heading 2 numbering to 1.X. How do I fix this problem to restart the numbering with the proper number for heading 2 style without making the Heading 1 a numbered list?

I am aware that there is a way to restart the numbering in 2007, but that is unfortunately not an option for me
Thanks!
 

More replies
Answer Match 66.78%

I have been searching for two days to find an answer to whether or not you can highlight tasks on a task list. PLEASE HELP? I want to be able to highlight a task in Microsoft Office 2003 Professional Edition to show importance and bring attention to a specific task.
Please Help!!!!!!!!!!!!!!!!!
 

A:Help with Microsoft Office 2003 Task List?

You should be able to flag it with a color from the list.
 

3 more replies
Answer Match 66.36%

I am a 3rd year university student studying Forensic Science and i have to admit im not much of a writer and these long essays absolutly kill me...i spend so much time bringing up the word count window (time i probably should be spending writing). my question is...is there any way of having a word count always on the screen counting as i go?

does anyone know if this can be done...if so how?

please let me know if i need to download something (and where to get it) or what settings i need to change in word if that needs doing.

Many Thanks
 

A:Microsoft Word 2003 word counter....

View->Toolbars->Word Count

You still have to click the recount button though.
 

1 more replies
Answer Match 65.52%

Is there any way of increasing the number of MRU files shown in Word, above the 9 maximum in Tools - Options?

I am aware of the involved coding method on http://hacks.oreilly.com/pub/h/2555
But is there no simpler registry based change for this, or is it hard coded into Word?

A simple solution for Word 2000 (under Windows 2000) and Word 2003 (under XP) is sought. If such a thing exists!

Thanks.
KG
 

A:Microsoft Word - MRU file list expansion

bump
 

1 more replies
Answer Match 65.52%

Hi, when using a list and a regular formatted text, they are separated by a page. On the left page, there is the regular text, and on the right page is a list I made.

Whenever I press delete at where the arrow is pointing, it deletes the words in the list, but not the large space.

How can I get rid of the space?

A:Microsoft Word Space between List and Words

I'm guessing that there is either a page break or section break immediately after the text on the left hand page. To see it, click the "Show/Hide" icon as in the screenshot below. To get rid of it, highlight it then right-click and select "Cut" (for some reason, hitting delete or backspace doesn't always do it, but cut does), and then the list should jump back to start just under your text. If not, post back and we can try plan B

3 more replies
Answer Match 65.52%

Hello,
I have a very long outline in MS Word. When I hit return after a paragraph, normally, it provides the next number (or letter) so that I can continue with the next item. It's no longer doing that. So now, if I'm at 'A.' and hit return, I end up not at 'B.', but at the left hand margin as if starting a regular line. I then have to press the list button and indicate which level I want the new line at. Not a big deal once or twice, but it's an 18-page outline that I need to edit.

Thanks so much for your help.
 

A:MS Word Numbered Outlines

On the MS Word menu bar along the top, go to the "View" drop-down menu. Then, click on "toolbars" and be certain that there's a checkmark next to "Formatting" (if not, click on "Formatting" to add the checkmark). This will bring up the toolbar that includes outline Numbering and Bullets.

When you're creating an outline, be sure to activate/highlight the desired icon on this toolbar. You can choose between "Numbering" (which includes letters), or "Bullets" (which uses symbols and shapes).

-- see attached image for guidance in identifying the toolbar and icon(s) --

Hope this helps!
 

3 more replies
Answer Match 64.68%

I have Microsoft Word 2011 installed on a Mac OS 10.7.3. Does anybody know what could cause this error? The bullet points are showing up as hollow squares.
 

More replies
Answer Match 64.68%

A problem that I haven't encountered before is shown in the attachment below. All was going as expected, until I reached #10 on the list, and it decided to add 4 addtional spaces between the numbers and the items, and won't permit me to backspace as I would like. Can this be corrected?

A:Word 2007 Numbered Lists

Since you've already started your lists, what you need to do is right click on the page and go to >Adjust List Indents > Follow number with: > and then choose the selection you want. Right now it is set to Tab. Set it to space and adjust the spaces between numbers and items manually.

2 more replies
Answer Match 64.68%

I'm working on a technical document, and the customer wants numbered headings.
In Word 2007, I can't find any way to do that (used to be possible in earlier releases of Word.)
When I search Microsoft's Help, it tells me how to set up numbered lists, but I don't want a list -- I want numbered headings.

Anyone know if there's any way to do this?

Thank you.
 

A:No numbered headings in MS Word 2007?

It works fine for me?
I use numbered headers and multi-level numbering on sub-headers.

On the "Home" ruler
Just put a heading on and click on the numbering (either straight numbering of multi-level).

Once I have one paragraph OK O kust copy the heading and the first text row beneath it and Paste, then change the heading text and following text, saves having to redo the format. The header numbers should update automatically.
 

1 more replies
Answer Match 64.68%

I work with Microsoft Outlook 2003 and I would like to add all the mailaddresses I have in the folder: "Contacts", into my Sender List. What means: When I write an email and click on: "From". that I can choose from the senderlist which are all listed in Contacts.
Reason for it is, that I do send emails with multiple different sender addresses. (Business, Private, Hotmail, Gmail and so on)

I did a complete new installation of my system and it was possible before without any problems. It was automatically like this, when I added a new email address to my contacts it was "ALSO" available in the "From" menu.

PS: I also get the same message when clicking on To, CC or BCC. I just cannot choose from my contacts even so they are there.

When I compose an email now and click on the: From" link, I do get the error-message:
"The address list could not be displayed. The Contacts folder associated with this address list could not be opened; it may have been moved or deleted, or you do not have permissions. (btw. I'm admin on the system). For information on how to remove this folder from the Outlook Address Book, see Microsoft Office Outlook Help.
(couldn't find anything in the help menu either)

Can anyone help me?

Thanks
wizzle2003
 

A:Solved: Contacts and From list doesn't match (Microsoft Outllok 2003)

Hi wizzle2003

Right click on the Contacts folder > Properties > Outlook Address Book tab
Place a check mark in: Show this folder as an e-mail Address Book
Apply, OK to save and close.

The contacts should appear when selecting the To, Cc or Bcc buttons.

You can change the Account the message is From by clicking on the Accounts button and selecting one of your accounts from there.
Remove the From button, View > Uncheck From Field

Let us know if that works for you or not.
 

2 more replies
Answer Match 64.26%

I have hundreds of microsoft files in the root directory of my c:/ drive identified with a mishmash of letters and numbers. I am running Windows XP, home edition. I did not put them there and when I try to erase them I get a "cannot remove aspnet.msp. Access denied." Although all the files are identified differently, they all contain the same files. They are filling up my hard disk. Can anyone give me some me information on how to get rid of these files.
 

More replies
Answer Match 63.84%

im wondering, how do i square root a number in MW?
does it have to do something with like Insert>Object>Equations ?? or something like that? because if it is im having that problem =/

can anyone help? thanks
 

A:Microsoft Word 2003

Hum.. You want to insert a mathematical expression in your text? Or do you want Word to calculate a quare root for you?

In case of the former, you have to install an Office component called Equation Editor.
If you have that, then you can do Insert->Object->Create New->Microsoft Equation

Otherwise, you can always draw the formula in Paint and then copy-paste to Word
 

2 more replies
Answer Match 63.84%

I rebooted my computer because of a problem and on the restart the microsoft office requested the install disk which I supplied. Now I have an asian layout and numerous other things related to that in microsoft word. Any suggestions on how to get rid of this layout? Thanks in advance for any help. Joyjj

A:Microsoft Word 2003

Which program in Office?
Which Office?

Let's assume for a moment it's Word. Did you try Tools > Language > Set Language ...

2 more replies
Answer Match 63.84%

I was having issues with my Outlook 2003 and so I backed up my files and did an uninstall of the Microsoft Word 2003 and used MS clean uninstall tool as well.
I went to do a new install and my disc kept stopping at the same spot.
I have my licence key and now a corrupt disc. How do I go about getting an app Microsoft Word 2003 to download?
Thank you.
 

A:Microsoft Word 2003

7 more replies
Answer Match 63.84%

i have reciently occured a problem with opening of microsoft 2003 files(all of them), when i go to open the file it prompts me for permision from the user control (the computer never done this until reciently). once i give permission an error box appears(no error codes) saying that the file cannot be found. once microsoft word opens a black screen appears. i have repaired, system restored, and re-installed the programme and have now ran out of ideas. any help please???

thanks
 

A:Microsoft word 2003

7 more replies
Answer Match 63.84%

With Word, I have words that i use that are correct, but it keeps underlining them in red and i know you can add the words into its dictionary so that this doesn't happen for those words anymore. I forgot on where you do it, i know i should know as i've been using word since Office '95. I just always click on ignore. Someone did tell me once, but i need my memory refreshed.

A:Microsoft Word 2003 - Need Help

The easiest way I found was to run spell check and when the pop up dialog box appears on words not in Word's dictionary( red squigglies) , there is an option to ignore, change, etc., or "add to dictionary". It is there that I make a decision whether to add or not, and I add it to the general dictionary. Check the HELP to determine how to set up a *special* dictionary, if that is what you want to do, just for these words.
Hope this helps.
John

10 more replies
Answer Match 63.84%

I presently use Microsoft Word 97 to do web pages. I have been asked to take over the maintenance of a site that has used Microsoft 2003. They have used frame and I would like to get rid of frames altogether. I guess my main question is: Can I disable frames in Microsoft 2003.

Thank you

Rob
 

More replies
Answer Match 63.84%

I assume this is some sort of TOGGLE.

I had been trying to turn OFF the damned automatic text replacement buttons, etc (as when a word should be capped or is spelled wrong).

Apparently, I tossed these BOTTONs out--or more likely toggeled them off.

Any help Most Appreciated.

THANKS

A:Microsoft Word 2003

How about Tools > Options > Spelling and Grammar > UNtick 'Check spelling as you type'?

4 more replies
Answer Match 63.84%

Hi Guys

i'm running windows xp, i'm having trouble opening certain e-mails, when i open one sometimes a blue Microsoft Word screen comes out in the background, you know like if i was going to write a letter, and then i get a window that states " The Command cannot be performed theres a dialog box open, close the box and continue ' but when i close it i get another window asking me for my 25 product key which i found and i type it in with caps or no caps and i get a window that states i put in the wrong product key, i can finally open the email opening it with Note Pad, but still i think i might have future problems with this product key thing is there anything i can do, like maybe download Microsoft Word ?? i'm totally lost here, any help would be greatly appreciated.
 

A:Microsoft Word 2003 !!!!!!

You have to type in the product key exactly as it appears. It is case sensitive and make sure that you type a 1 for number and l for letter, same for 0 number and O capital letter.
 

3 more replies
Answer Match 63.84%

In Word 97 on Windows NT operating system. Everytime the user opens Word the first blank document is numbered 3. What happened to number 1? Could it be the normal.dot? I'm just not sure where that number is pulled from. Any ideas how to fix this?

thanks
 

A:Word 97: New Blank Documents Numbered Wrong

6 more replies
Answer Match 63.84%

<Rant On>Is one allowed to rant about Microsoft on these forums? Probably not. Let me just say that I have never met anyone who understands how the MS Word styles work - and I've been using Word since Windows 3.1...
I would love to meet with the developers at Microsoft who are responsible for this stuff...
<Rant Off>
Here's the problem.

I want paragraph numbering so I can create a document that looks like this:

1. Introduction
This is a document that has handy numbered paragraphs
1.1 Why do I want them?
The reason is that in a tech spec, it's handy to refer to para numbers
1.2 Why can't you get it right?
I've tried messing with the default styles but...

The problem is the interconnectedness of the styles. For example, the style used for the ToC heading is based on the Heading 1 style. So if I change the Heading 1 style to be numbered, hey presto the ToC gets a 1 in front of it... And don't even talk to me about what happens to bullet lists.

What I really want is a tried and tested Word template for writing documents with numbered paragraphs - not much to ask!

Is there such a thing? Or do I have to re-invent the wheel for the 47,000th time?

I've found some templates on the web - but they're mostly concerned with fancy appearance, not the basics of an ordinary document that has numbered paragraphs.

I've also found instructions on how to create your own styles/template. Talk about scary. Every one has caveats and w... Read more

A:Word 2007 Styles - Numbered Paragraphs!

LOL. YES! You can rant all you want. I do. Please take my extreme tutorial on styles, and THEN tell me they didn't know what they were doing, okay?

http://www.officearticles.com/tutorials/an_extreme_tutorial_on_styles_in_microsoft_word.htm

Now, I realize that my article is 2003, but it's very similar in 2007, and the basics of how styles work is the same.

I hope it helps. I hated styles for a very long time, too.
 

1 more replies
Answer Match 63.42%

Hi!

This is driving me nuts. When trying to open a word doc microsoft word shuts down or opens in safe mode.

I have had this HP TX1410US for two weeks. I transfered files from another computer with XP using a Belkin Sync Cable.

Any ideas?

More replies
Answer Match 63.42%

Good Morning, I got a new laptop. Successfully loaded out MS Office 2003 from disc. I was successful in registering/validating it with Microsoft. All works fine. I am able to perform all Word functions. The only problem is every time I open Word it presents me with the End User License Agreement and asks that I ACCEPT or DECLINE. I have accepted it over 10 times, but it will ask me again the next time I load Word.

Any ideas as to whats going on? Or, any suggestions as to how I can stop the EULA persistence.

Thank you all for your help and assitance.

MHEMLOCK

A:Microsoft Word 2003 Eula

Maybe this information from Microsoft will help:"You must accept the Office End User License Agreement every time that you start an Office program":http://support.microsoft.com/kb/884202There is also this page, which references the same Knowledge Base article from Microsoft:http://uksbsguy.com/blogs/doverton/archive...-coming-up.aspx

2 more replies
Answer Match 63.42%

I have a new laptop with Windows 7 pre-installed. I'm running Microsoft Office 2003 and want to change the normal.dot file, but I can't get at it. Windows Explorer tells me it's at C:\Users\Owner\AppData\Roaming\Microsoft\Templates\normal.dot, but I don't see andy AppData in the Users\Owner display. Currently to open a Word file, I basically go through C - Users - Owner - My Documents - WORD.DOC

I have similar ACCESS.DOC, EXCEL.DOC, PDF.DOC, PPT.DOC folders in My Documents to get into files for those Microsoft Office programs.

A:Normal.dot in Microsoft Word 2003

In Explorer go to Tools menu, Folder Options, View, then make sure to enable Show Hidden Files Folders and Drives.

Otherwise you wont' see AppData.

Also select to Set all Folders with those settings.

3 more replies
Answer Match 63.42%

I have Windows XP and Microsoft Word 2003. I am trying to print a greeting card for the first time. The card size unfolded is 7 1/2 by 11. Once folded it wll be 71/2 by 5 1/2. When I choose print, I get the message "The margins of section 1 are outside the printable area of the page". I don't understand what section 1 is. I've moved the margins and I still get the same error.

Thank you for your help,
Kaye
 

A:Margins in Microsoft Word 2003

6 more replies
Answer Match 63.42%

hi i'm new here but hope someone can help me! i use word all the time, recently when i highlight text and press the back space it doesnt delete also when highlighting to change to another word that i would like the type, the new word is just inserted and doesnt replace the highlighted text.im assuming this is something i have pressed as the problem is only a few days old! can anyone help me????thank you in advance (Moderator edit: thread moved to more appropriate forum. jgweed)

A:Microsoft Word 2003 Problems

can anyone help me????

5 more replies
Answer Match 63.42%

Hi, I've been having this problem with MS Word 2003 for a little bit.

What happens is, I open the application, and the Word box pops up like it's about to open like it should, but then it takes forever to open, maybe over 10 minutes or so, unless I just end the process like I usually do since it takes so long.

The only thing I've noticed different about anything when I open it is, Navw32.exe starts running, and if i end that, an alert window opens that says "The document C:\Documents and Settings\David Solis\Application Data\Microsoft\Normal\Templates.dot is still infected. Do you want to delete this file?". I'll click no, and Word opens.

Any idea what any of this is, why it's doing it, and how to stop it? Thanks!

Dave
Here's a HJT log:

Logfile of HijackThis v1.99.1
Scan saved at 9:00:30 PM, on 11/22/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\system32\dllhost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\hpq\HP Wireless Assistant\HP Wireless Assistant.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Pro... Read more

A:Microsoft Word 2003 Problem

6 more replies
Answer Match 63.42%

In the old microsoft word, when you had more than one document open, they would all use the same window, and minimize within itself. However I now have 2003 and when I open a new document, they are completly seperate windows and use two buttons on the task bar. I liked having all my documents open in the same program that i can control with the x in the corner. This is hard to explain so i Hope you know what i am talking about. I know it is possible to change this setting because ive used antoher computer where it has done this. I just can not find it in the options or anywhere I have looked. Any help would be appriciated. Even maybe a term i could use to look for it. THank you
 

A:Microsoft word 2003 question

In Word 2002 (XP version) you can go to Tools > Options, click on the View tab and clear the checkbox labeled "Windows in Taskbar". According to the Word Help, this will force all Word document windows to be represented by a single button on the taskbar. Word 2003 should be similar.

M-dash
 

2 more replies
Answer Match 63.42%

When I try to open Microsoft Office Word 2003 a window pops up that says window installer then it says installing microsoft office word feature. It stops half way and another window pops up that says Installation error file not found. A required installation file SKU112.CAB could not be found. Original installation source required. If you installed Microsoft Office Standard edition 2003 from cd please insert your cd. If you installed Microsoft office standard edition 2003 over your computer network please browse to the installation source on your computer. Also a window popped up that says Microsoft word has not been installed for the current user. Please run setup to install application. I don't have the cd its lost. This just started doing this about a month ago. I can't open any files through microsoft office word or power point. I have windows xp. I don't know hardly anything about computers so I don't know what to do. Any help will be appreciated
 

More replies
Answer Match 63.42%

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Pentium(R) Dual-Core CPU T4500 @ 2.30GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4058 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1805 Mb
Hard Drives: C: Total - 290143 MB, Free - 247709 MB;
Motherboard: Dell Inc., 0N7J7M, , .7TMFZM1.CN701660CB01TO.
Antivirus: Lavasoft Ad-Watch Live! Anti-Virus, Updated and Enabled

I use WORD 2003 and I cant get a verticle ruler on the left
 

A:Solved: Microsoft WORD 2003 help

Welcome to TSG.

Are you in print layout view? That's the only view that will display the ruler in Word 2003. If so, go to Tools/Options and select the View tab. Under Print and Web Layout options, check the Vertical ruler box. Hope that helps.
 

2 more replies
Answer Match 63.42%

I bought a new Dell XPS 420 with Microsoft Works Plus 2003 preinstalled. Everything works fine except Word 2003. Certain things I try to do take forever. For instance, trying to insert a chart, print anything, copy and paste something into Word, and several other things can take 60 seconds or more to load. During this time, the program is basically froze until it completes. If I try to close it, I get the ever present ?program not responding? message.
I've tried uninstall/reinstall and ran ? repair Word?. Nothing seems to help. I downloaded the trial version of Word 2007 just to see if it would work, and it worked fine.
I'm running Vista Home Premium 64bit.
If anybody has any ideas, I would appreciate it. System Info below.


OS Name Microsoft? Windows Vista? Home Premium
Version 6.0.6001 Service Pack 1 Build 6001
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name
System Manufacturer Dell Inc.
System Model Dell XPS420
System Type x64-based PC
Processor Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, 2327 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date Dell Inc. A06, 6/23/2008
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume3
Locale United States
Hardware Abstraction Layer Version = "6.0.6001.18000"
User Name
Time Zone Central Standard Time
Installed Physical Me... Read more

More replies
Answer Match 63.42%

I have never had a problem with Microsoft Word until now. I can use Word fine on my computer. In the past week or so, however, when I send Microsoft Word documents to people, sometimes they say they can open them and sometimes they say they can’t open them. It depends on the person.On some of my e-mail clients (I have multiple e-mail accounts), I can open the files I send myself (i.e. I will send an e-mail to my multiple e-mail accounts and I will attach Word documents to that e-mail. On some clients I can open the files I send myself, and others I can’t...I did a check disk /r (checkdisk repair) on March 9 and it fixed the problem. I could send Word documents and everyone could download them and I could send Word documents to myself and download them via AOL Mail, Yahoo, and everything. And then the problem came back again.When I click on the file in the mail client that doesn’t read the documents correctly, the attachment comes up as saying that the mail client interprets the .doc file as being related to Notepad (specifically listing Notepad as the program it wants to open the file in), not Word. Then when I try to open it (either straight from the e-mail or after downloading the file back to my hard drive), it tries to open in word and gives me the converter message.When it was working for a little while on March 9, the way I knew a Word document would work correctly even before trying to open a file is that AOL.com Mail would list it as being a Word doc... Read more

A:Microsoft Word 2003 nightmare

I haven't read nor absorbed your entire message.
There's one thing that comes to mind immediately - your clients may have slightly different Word. If they have 2007, you need to send them the 2007 version or have them open as previous version (if possible).

Long ago there was an office update which added some sort of converter to my Office2003. Perhaps if you save as some other than 2003 .doc it would work. That update permitted me to open a document or two someone sent me.

Edited: what is one supposed to do with that megaupload site? All I see to pay lots of UK currency. I'm willing to try to open your
files in my Office2003 but not under those conditions.

9 more replies
Answer Match 63.42%

Hello:

I have a new computer.

I have 'Microsoft Office Word 2003' on my old computer and I wanted to place the program on my new computer except that I can't find the cd.

My Question:

Is there a command that I can use, say in the "run" program to transfer all the files of 'Microsoft Office Word 2003' of to a thumb drive and transfer the 'Microsoft Office Word 2003' to my new machine?

Thanks to all.

A:Microsoft Office Word 2003

I believe the answer is no, if you don't have the CD; see this link:http://ask-leo.com/can_i_transfer_my_softw...ew_machine.html

4 more replies
Answer Match 63.42%

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.06GHz, x86 Family 15 Model 2 Stepping 7
Processor Count: 2
RAM: 1918 Mb
Graphics Card: VIA Chrome9 HC IGP Family WDDM, 128 Mb
Hard Drives: C: Total - 76216 MB, Free - 44454 MB;
Motherboard: BIOSTAR Group, P4M90-M4
Antivirus: avast! Antivirus, Updated and Enabled
I can fax directly from fax and scan OK. But when I try to fax from microsoft word 2003 it doesn't work. When I get into the fax wizard using "send to recipient using fax modem" it skips over where I put recipient, cover sheet and sender in so I can't send the fax.
When I try going thru printer, it inserts my doc in attachments and is unreadable. THANKS
 

More replies
Answer Match 63.42%

Hey,

I have a problem where Word 2003 crashes when I open a document, especially if that document is an email attachment, or something I havn't authored, it happens about 95% of the time. It usually freezes and i can't type, or use my mouse on the page, i usually have to right click on the window bar to close the window. It then pops up a window that I have chosen to close the unresponsive program and asks me to send notification to microsoft. I have dloaded all the latest security packs etc., checked the msoft website, visrus checked and run the office recovery software as well and havn't had any luck in fixing the problem.

Any ideas?

Cheers,

thelaceman
 

A:Microsoft Word 2003 keeps Crashing

word keeps crashing

Wondering if you found a solution to your problem because I have the same issue. Please let me know smlvoice@netvision.net.il
 

6 more replies
Answer Match 63.42%

hello all
I am having problem loading MS word 2003. I have windows xp installed, and had office 2003 installed on my PC. It was working fine, but lately it wont load word. it goes to start the application but just hangs there and will not start. I have tried different copies, uninstalled and reinstalled it. i run into same problem every time. when i restart my computer word starts into safe mode and i have used detect and repair from help menu.all other applications ( excel, access, power point ) work except word. I have also tried updating from Microsoft support. I am stuck, any help would be appreciated.thanks
 

A:microsoft word 2003 will not load

do a search on your system for normal.dot and when you find it, rename it to normal.old

try to open Word

if it works, and you have no macros or personal changes made to your normal.dot, then simply delete normal.old
 

3 more replies
Answer Match 63.42%

Hi there,

I asked a similar question before in that it involved Microsoft Word 2003; and I have another in a related vein now. Is it okay/or safe to have 100 and more pictures in one .doc file? I don?t mean that the pictures here are ?as-is? -- in other words, big pictures -- but they are in fact shrunken down in the document ? sort-of like small stills, lined up. Is this okay to do?
 

A:Care with using Microsoft Word 2003

I don't see why there would be ay issues having that many images in one file.
At least if anything, it would be up to the computer, not MS Word, MS Word is made for large documents, if required in the office.
 

21 more replies
Answer Match 63.42%

I am trying to print a flyer I made in Word 2003. I created it with borders. When I try to print it, the bottom border will not print. I am using Vista Ultimate. Can anyone help me with this? I've tried adjusting the bottom margins but still no luck. It prints just fine without a border, but with borders, the bottom one will not print. Any advice would be welcomed. Thank you.
 

A:Microsoft Word 2003 and HP 5610v all in one

8 more replies
Answer Match 63.42%

I am using Win 98 and Word 2000

When I set up a numbered listing, e.g.,
1. run to the store.
2. walk to the house.
3. talk to anyone.
is there a way to have Word give each of the first words, i.e., run, walk, and talk, initial caps? Now, I have to manually make each first letter capital, myself.
 

A:How to get Initial Caps in a numbered listing, in Word 2000

8 more replies
Answer Match 62.58%

When I try to open Microsoft Office Word 2003 a window pops up that says window installer then it says installing microsoft office word feature. It stops half way and another window pops up that says Installation error file not found. A required installation file SKU112.CAB could not be found. Original installation source required. If you installed Microsoft Office Standard edition 2003 from cd please insert your cd. If you installed Microsoft office standard edition 2003 over your computer network please browse to the installation source on your computer. Also a window popped up that says Microsoft word has not been installed for the current user. Please run setup to install application. I don't have the cd its lost. This just started doing this about a month ago. I can't open any files through microsoft office word or power point. I have windows xp. I don't know hardly anything about computers so I don't know what to do. Any help will be appreciated
 

A:Can't open Microsoft Office Word 2003

duplicated thread - closing this one
 

1 more replies
Answer Match 62.58%

Hello there.

Microsoft office 2003 problem.
When starting microsoft word on vista ulitmate, there seems to be a problem

This will automatically shut down, saying there was a problem and is shutting down...
The other programs seem fine, Excel, powerpoint, etc.

I havent a clue what this could be, has anyone else had this problem.
In the top right corner of microsoft word it will say "Finalizing Installation" and then after you type a couple of sentences it will shut down on its own..

This is for a friend of mine, who had microsoft office put on when she bought the laptop of a friend, though she does not have the disk, so i wondered if this is an installation problem.

Would this be some sort of copy of microsoft office 2003, that was put on for her
She has only found this out now as her son needs to use word for school
( vista ultimate, 64 bit, sp2)

A:Microsoft office 2003/ Problem with Word

I assume that you're opening up Word from the Start menu here...

Open up the Start Menu and go to Word. Right-click on it. Open up its Compatability tab which is the third tab.

2003 is an XP product. Therefore, Word (and Excel and Access if they're 2003 versions) should be run in compatibility mode for "Windows XP (Service Pack 2)."

If this is not so, check the box and select Windows XP from the list to make it so amd OK the box to close it.

See if it runs now.

7 more replies
Answer Match 62.58%

For almost a month iam having this problem.Whenever i paste any words in Microsoft Office Word 2003......a Popup comes saying :Please wait while Windows configures Microsoft Office Professional Edition 2003and then it pastes.It is annoying.Each time when i paste,it comes.msiexec.exe runs in the process.I disabled it in services.Then no problem in pasting.I installed a software later,then it asked for windows installer as it is needed.Then once again i enabled it.How to stop that popup from coming without disabling msiexec.exe ?

A:Microsoft Office Word 2003 problem

I have seen several suggestions for dealing with this problem, some work for some people, others don't and
some of them are potentially destructive, in my opinion, therefore I do not propose to supply any links.

However, I will tell you that I had the same problem recently. I run Office 2003 Professional Edition and
downloaded the Office 2007 trial. It was not for me and I uninstalled it. My problems then started,
with these 'Please wait while Windows configures' messages.

I tried all the usual 'repair' methods, but the only thing which fixed the problem was a complete
uninstall and reinstall of Office 2003. That would be my only suggestion and in addition,
I left the setup files on my hard disk, when asked, because there are some features that are not
immediately installed by the program, even on a full install and it saves digging out the CD/DVD
whenever you come across these features. (Don't remember too clearly which ones, I think it
may have been in connection with Publisher).

I appreciate this may be stating the obvious. If you can find an easier method, which you trust,
good luck.

btw, I am assuming that your computer is virus, adware, malware and spyware free.
You should run something like Malwarebytes and SuperAntiSpware if you haven't
checked recently; presumably you have a realtime antivirus scanner.

3 more replies
Answer Match 62.58%

I have typed documents in word 2003 before and saved to my USB , today when I tried it tried it said "cannot save due to file permission error " Is there any solution to this problem?
 

A:Microsoft Word 2003 permission error

most USB sticks use the FAT file system and so there shouldn't be any file permission issues. Check your USB stick for errors.
 

1 more replies
Answer Match 62.58%

Whenever I try to open a saved Word document (or even a PowerPoint), the file doesn't open and I get the following message:

"The file ____ is not available.
You may be encountering this message because an anti-virus program is not allowing the file to open. This can be caused by one of two conditions. Either the anti-virus program needs to be updated (due to a compability problem with this application) or there is a virus in the file but the anti-virus program cannot properly remove or process the virus it has found....etc."

Then when I close the document, I get the following message:
"The file Normal already exists. Do you want to replace the existing file?"

I've tried deleting the file. I've restarted my computer, deleted "normal.dot" through my computer's search engine, and then opening word. I've tried renaming the file to "normal.old", and followed the instructions after that like I found on a website.
Also, I went to Tools > Macro > Macros and gone to the "Macros in" list, clicked "All active templates and documents", but there weren't any macros listed there.

I tried using the Macro Organizer, and there weren't any macros listed there either.

Many websites suggested that I open the file through MS word and then hold shift before opening it. When I try to open a file, it just says that it isn't available.

Oh, and I'm running on Windows Vista.

Is there a... Read more

More replies
Answer Match 62.58%

I've been using word 2003 in windows 7 for a couple years now and it always worked fine. Recently, I have been experiencing this issue where if I click on "save as" to save the file and then double click the C drive it just sits there and freezes for a couple minutes (and I get the "not responding" box with everything whited out). I tried to uninstall and reinstall microsoft office 2003 and the problem is still there. I don't know why it's doing that when I click on the C drive because I can save the file to the desktop or under documents right away without any freezing and then move the file -- but this is a hassle. How can I fix this problem?

Please help!

A:Microsoft word 2003 issue in windows 7

Your C: drive/partition may need defragmenting:

Windows Button >> All Programs >> Accessories >> System Tools >> Disk Defragmenter

1 more replies
Answer Match 62.58%

When I open microsoft office word 2003 i can perform all functions except for the menu. The menu drop down fields are frozen. It was working fine and then all of a sudden i cannot use the menu. I'm using Windows Vista operating system. Any suggestions on how to fix this problem? Thanks
 

More replies
Answer Match 62.58%

Every time I get a word file as an attachment and open it up, it defaults to the reading layout, then I have to close that to get it to display as I want. Is there a way to disable that and only put it in that format if I want? Thanks
 

A:Solved: Microsoft Word in Office 2003

Disable opening file in reading layout in Outlook or Word.

Courtney sends...

PS: I have Office 2007, so I don't remember the exact location, but it is probably in Tools, Options.
 

3 more replies
Answer Match 62.58%

The Symbol option has disapppeared from my Word application under Insert. I can't find it anywhere to recover it to the Insert tab. Can someone please tell me to how to recover it?

Thank you.
 

A:Solved: Microsoft Word 2003 problem

try this
Tools
Customize
Toolbars/Menus,
select the Menu Bar
Reset,
it should set all your main menus and built-in toolbars back to the default.
 

3 more replies
Answer Match 62.58%

Heya Guys,

Not sure if this is the right place too ask, but I am all out of options.

I have this problem with Outlook 2003 & text wrapping: When the email is busy being typed, the wrapping works and it flows over to the next line automatically but when the recipient opens the email its just one long line

We use html email formats.. This problem also onle seems to happen sometimes...

If someone can point me in the right direction i would be gratefull

Thanks
Timmy

A:Microsoft Outlook 2003 & Word Wrapping

Sheesh, not even a I dont know :|

2 more replies
Answer Match 62.58%

Scenario:

Multiple windows of word are open and when I start flipping back and forth, Word Crashes. The temp files that start with the ~ don't recycle when Word crashes either. I've been having this problem since I installed Office 2003 and I've tried reinstalling it several times.

Any ideas what could be causing this?

Thanks for your help?
 

More replies
Answer Match 62.58%

Hello,
I have been trying to reset my setting so when I type the indent basically starts on the top left hand corner like it used to do, but when i open word it starts all the way on the top near the beginning of the page but slightly towards the right hand side. I am trying to fix this problem but can't seem to do so, any suggestions?
 

A:Microsoft Word 2003 Indend problem

16 more replies
Answer Match 62.58%

Hello,

I am trying to create a letter template that has drop downs in it so that a user can choose which paragraph to put in the letter.

I can create one by using the Drop down form field but it will only let me put a certain amount of text in there.

Is there a way I can do this?

I dont want to do auto texts just the drop down.

Any help would be really really appreciated.

Thanks very much.

Kirsten
 

More replies
Answer Match 62.58%

Hello,

I currently have about 30,000 lines of macros. Occasionally the people I work for want an updated list of all the macros in that file (most are user specific) so that they know what macros they have and if then need a different one or edit a current one.

What have been looking for is a way to print the names of the macros only, and not the entire marco file/code.

the first macro looks something like this..

Sub hinj()
'
' hinj Macro
' Dr. H's Corticosteroid Injection
'
Selection.TypeText Text:= _
"DESCRIPTION OF PROCEDURE"
Selection.TypeParagraph
Selection.TypeText Text:= _
"The patient's * was injected with."
end sub

(cut short for brevity)

then the next macro, and so on and so forth.

What i have been looking for is a way to print a list of the macros but not the macro themselves.

IE.. I wold like it to print out...

hinj Macro
Dr. H's Corticosteroid Injection

hhyal
Dr. H's Hyalgan Macro

hspi
Dr. H's Supartz Macro.

so on and so forth with all 375 macros printed.

Is there a way to do this? I would be most appreciative for any clue as to how to do this.
 

A:Microsoft Word 2003 macro print

Bump...

Is this not possible?
 

1 more replies
Answer Match 62.58%

I'm using an Asus Laptop K52F running Window 7 with 4 GB RAM. Suddenly the Microsoft Office 2003 has developed a problem whereas I can not save, and/or open/close various files. When I open Word to a blank page I get the message "Windows cannot open the existing (normal). When I try to close it I get different messages that I don't understand concerning saving to "normal" "yes/no", etc. then finally closes to my desktop. I uninstalled the program and then reinstalled to only get the same thing happening. Is this repairable and are there any options to fix/resolve? Thanks
 

A:Solved: Microsoft Office Word 2003

16 more replies
Answer Match 62.58%

For some reason, I cannot even open my Word 2003. I click on the icon and it shows in the bottom toolbar but doesn't open. This happens if I try to open a word file or the program.

HELP!

A:Microsoft Office Word 2003 problem

Hi Sallysara,

if you go to Add/Remove Programs, (Start, Control Panel or (My Computer Then Control Panel) The Double Click On Add/Remove Programs, Then Go Down To Microsoft Office) Click On Change Then A New Window Will Open And Click On Repair. That Should Work. If Not Put You Windows Disk In And When It Opens Click On Repair.

That Should Sort It. If Not Just Message Here Again

Jaymie.

6 more replies
Answer Match 62.58%

I was using Word normally only a few hours before this started.

Word types random sentances by itself. It also prints multiple pages, opens new windows and changes the page set up all by itself.

I brand a file onto the computer from my USB device just before this.

Anyone got any idea what the problem is and how i can fix it.

I have already uninstalled and reinstalled the program, but the problem remains.

Help!
 

A:Freaky problem with Microsoft Word 2003...everyone please look

Virus?
 

3 more replies
Answer Match 62.58%

I am using a computer in the office. There are two of us that use this computer, myself and my boss. Neither of us are really computer saavy, we understand the basics and thats about it. We only work in the office on rainy days, any other time we are outside. But we have been using Microsoft word 2003 for a few years and have never had a problem loading it until now. It takes up to 5 minutes sometimes to load the program. We are using Windows XP 2002 edition, service pack 3. The computer is a dell Dimension DM051 Intel (R) Pentium (R) D CPU 2.8GHz, 2.79 GHZ, 1.00GB of RAM. All our reports are in Word format and every time we open any report it is taking up to 5 min. to load. Is this a virus, spyware? I dont' think its the computer itself because we've never had a problem with this or any other program before. Any support or suggestions would greatly be appreciated thank you.
 

A:Microsoft Word 2003 is slow to open

Does this happen with other programs?
How full is the hard drive?
 

2 more replies
Answer Match 62.58%

Hi,

I've a little problem, when I start Word 2003, it takes around 20 seconds and then I can use it.
Some times there is even a force close. (then the word 2003 freezes)

And if I type: winword /a in Start it starts up directly.
So now my default program for .doc files = winword. (which is slow)
I can't change it to /a.
(/a is add-ins??? so winword /a = word without add-ins?)
Can i disable those add-ins?

My Pc specs = the 2nd in my computer specification
vista home premium x64
4gb ram
640gb harddisk

Thanks in advance
 

More replies
Answer Match 62.58%

I am running windows xp and my Word application takes close to a minute to open up. Once open it works fine, saves quickly. I was advised to change the template normal.dot to another name....or to delete the file.....I have tried both....the first time after doing so, Word opens in a second....but then there is another normal.dot created and the next time I try to open it I am back to waiting?? any words of wisdom will be appreciated
Katy

More replies
Answer Match 62.58%

I've created a character at unicode hex E000. Whenever I try to enter it into Microsoft Word, however, it ends up giving me some kind of Chinese character. I tried saving the character at unicode hex E010, as well, but it just gives me another Asian character.

I don't want to have to find those Asian characters and change them, as I may need them in the future.
 

A:Importing Symbols to Microsoft Word 2003

10 more replies
Answer Match 62.58%

Hi,
I'm having this problem with Microsoft Word.
I has never happen before and it doesn't happen with other office program like PowerPoint or Excel. Just Microsoft Word.

My Office is: Microsoft Office Word 2003 (11.5604.5606)
Part of Microsoft Office Professional Edition 2003

The problem is when I'm using my Khmer Font (Limon) and I type a certain letter (only this one letter) which use Ctrl + Alt + T it change my font to Time New Roman size 10 and the cursor also change appearance.
I'm attaching the pictures of screenshot and logs I scan with MBAM and CCleaner. Although I don't think it's virus problem.
Please help me.

Thanks,
Rasmey
 

A:Microsoft Office Word 2003 Problem

Sorry on the go

But all it is. Is that you have size 10 and then size 22 after it

I can't explain it clearly it's 10 10 10 10 10 22 22 22
And when you backspace the 22 size it stays 22 until you make it size10 again
As for that little dot, it must be the font at that size, or something
 

2 more replies
Answer Match 62.58%

hi there:
Where can i find info on the difference bet. Microsoft Outlook 2002 and 2003 and Microsoft Word 2002 and 2003?

Thanks.
Liz
 

A:Microsoft Outlook and Word 2002/2003...

You could try a Google search, Lizzy:

http://www.google.com/search?q=what...=&rls=GGLG,GGLG:2005-32,GGLG:en&start=10&sa=N
 

1 more replies
Answer Match 61.74%

When I bought my new computer its' 64 bit, I transferred everything from my old 32 bit computer and

everything went fine, but my word 2003  will not load the Pleading Wizard.  It loads everything else in the
word program but the PLEADING WIZARD, it was working fine in windows 10 at 32 bits
Does anyone know how to get my 2003 32 bit program to work on my new 64 bit computer?

More replies
Answer Match 61.74%

I've run into a bit of a weird issue with my Microsoft Word. Whenever I highlight/select text, and press any button (space, "x", backspace, delete, etc.), instead eliminating all that text and performing the action that I pressed, the text just stays in place as if I never highlighted in and the action is carried out at the beginning of the selection. I've never seen anything like this before, and I'm really not sure how to search in the help function for it, so does anyone have any idea how I might fix this? Let me know if you need more information or anything and I'll be happy to share. It's just a very irritating, very bizarre issue. Thanks!

- Carder
 

A:Microsoft Office Word 2003... Weird Issue

I don't have Word on this comp to test, but hit the insert button, and then try again, see if that changes anything.
 

6 more replies
Answer Match 61.74%

Hi Guys

I just install Microsoft word professional 2003 edition along with the service pack for office 2003, but windows XP can't seem to ready any of the files.
this is what i installed, is there something missing or do I need a driver?
office2003sp3-kb923618-fullfile-enu
office2003sp3-kb923618-fullfile-enu(2)
office2003sp3-kb923618-fullfile-enu.exe.part

I'm getting messages of: is not a valid win32 application, for the first file, and the second file it just loads the service pack, and the third file Windows need to know who created the file. I have windows look it up on the internet but it wants to download a file like "PC Mighty Max" to correct the problem. Should I do this?

Any help would be appreciated.
Thanks
Dale
 

A:Microsoft word professional 2003 install problems

spursume,

The first file [office2003sp3-kb923618-fullfile-enu] is the Office 2003 SP3 file, the second file [office2003sp3-kb923618-fullfile-enu(2)] is just a second copy of the same file. Both should be 117.7 MB in size. If neither of them are the correct size, you will need to re-download the SP3 file here.

The third file [office2003sp3-kb923618-fullfile-enu.exe.part] is an incomplete download attempt of the Office 2003 SP3 file. This is indicated by the .part extension.

You indicate that the second file " just loads the service pack." This exactly what it is supposed to do. Did you receive any errors during the install? Did the Office 2003 CD install without errors?
 

1 more replies
Answer Match 61.74%

I am attaching a bmp image of a word document with strange markings.

Can anyone tell me what they are and how do I remove them ?

Regards

FLYNNE
 

A:Solved: Microsoft Word 2003 strange markings

12 more replies
Answer Match 61.74%

Hello, I have Windows XP purchased in 2005, and came with Microsoft Office.

I was using Microsoft word early this morning and something happened and now it won't open.

Of all my desktop icons, everything has color except the Microsoft is WHITE, which I suspected right away had been compromised.

I don't have any Microsoft word software, it came with my computer.

Help, can I get it back? I need to write some letters.

Thank you.
 

A:Solved: Microsoft Office Word 2003 is gone and won't open

This link should prove useful http://support.microsoft.com/kb/821593 often the installation files are left on the computer under c:\msocache however the above links gives the easy way to repair the installation.
 

2 more replies
Answer Match 61.74%

Just recently something has changed with my Microsoft Office Word 2003 app.

I'm a writer and I have always been able to drag my pages that I have written today to a folder in My Documents and the same file would stay on my desktop for immediate access later. I realize other may not work this way but it is how I prefer to work as it has become my habit

When I try to drag and drop it now, it drops into the My Documents folder but it no longer remains on the desktop.

Now, in conjunction with this problem, I have another new problem, which is that when I write a page of text in Word and save it to a My Documents folder it doesn't go there. Also when I save a picture to My Pictures as I've always done it won't be there when I look for it. Something is preventing me from saving things and I haven't a clue what it is. I have to open the My Documents folder and drag the Word text page into it. It's the only way I can save stuff for some reason.

Can someone please tell me how I can fix this problem?

Thank you in advance.
 

A:Solved: Microsoft Office Word 2003 question

16 more replies
Answer Match 61.74%

I'm having a strange problem with Microsoft Word 2003 SP3.

It only happens on new docs. I'm a writer and when I open ongoing projects in Word everything is fine, but when I open a new doc. my Page Setup doesn't work. If I set it to have 1" of space top, bottom and sides, it doesn't work on the top. My first line starts at the very top of the page.

Also, the ruler up the left side should be dark where that top inch of space should be, but it isn't because it's not working. I discovered a temporary fix in Page Setup by setting the top space to be 2" and the sides and bottom to be 1". However, even doing this I don't get the dark inch or so at the top of my left margin ruler.

I did a repair in ADD Remove Programs but it didn't change anything. It might be a corruption in Word because I have the same Office 2003, SP3 on my laptop and I've compared all the settings on both computers and they appear to be identical.

Has anyone here run into this problem, and do you think uninstalling and reinstalling Office might solve the problem?

Thanks in advance.
 

A:Solved: Microsoft Office 2003 Word problem

10 more replies
Answer Match 61.74%

I'm trying to get a Word template that has the auto-text "file name and path" inserted into the footer. I want it to update automatically whenever I save the document into a new directory. Right now it stays the same. Can anyone point me in the right direction? This is a work computer that does NOT have the ribbon.

thanks!
 

A:Microsoft Word 2003 Header-Footer Question

you just want to to state where it resides in the footer? in the header/footer section, select footer > tools button on the toolbar > insert auto text > filename and path. Then save the template, should be good to go.

and welcome to tsg.....
 

2 more replies
Answer Match 61.74%

Hello,

I am having issues with Word and Outlook 2003. I just upgraded them from 2000 and now I am running into a couple of issues. Help!

Microsoft Word 2003
- Can't highlight or select an area on my Word page with my mouse. I can use my keyboard, but that becomes quite annoying as you can imagine.

Microsoft Outlook 2003
- Can't highlight or select an area on my page with my mouse. I can use my keyboard, but that becomes quite annoying as you can imagine.
- Can't open Word document attachments only. I can open excel, pdf, etc..., but not Word.

I have restarted my pc, reinstalled office 2003, erased the normal.dot profile, removed the 11.0\Word\Data registry and no luck. Any solutions would be greatly appreciated. Thanks!
 

A:Can't highlight in Word 2003 and Outlook 2003. Can't open Word 2003 attachments.

9 more replies
Answer Match 61.32%

I keep getting error messages when trying to open files created in Word 2003. The files burn to cd without a problem but when I try to open them off of the cd I get the file may be corrupt try to use recover text option or open and repair option. The odd thing is these word 2003 files open in Office xp without any issues. I have also got an error stating I do not have adminstrative rights on my cd drive. The cd drive is not a network shared drive so I am confused by this error. I have replaced the old cd-r/rw drive with a dvd r/rw and still get the same problems. Any ideas would be greatly appreciated.

Jay
 

A:Solved: Microsoft. Word 2003 will not open files burned to cd

I think I fixed it. I replaced the ide cable and all seems to work now.
 

1 more replies
Answer Match 61.32%

Hi all,
I just switched OS from XP Media Center 2005 SP3 to Vista Home Premium SP1 x64. I moved all of my MS Word files over to the new OS. Now I need to know if I can install my copy of 2003 Word on Vista x64 and have it run properly, and open my 2003 Word files. MS Office 2007 Home/Student comes with EXcel and PP which I would never use and would be a waste of money for me.
Any information on this would be most appreciated.
Thanks,
Jakeman97

A:Microsoft Office Word 2003 in Vista Home Premium x64

it should work fine. you will have to reinstall any office updates and/or service packs, though.

2 more replies
Answer Match 61.32%

Hi, my problem is that when I was using Microsoft Word 2003, I reduced the font of one of the files I was working on and the entire file just transformed so that:
after every line, this symbol appears: ¶
before some lines, this symbol appears: º
and between words, this symbol appears•

This actually happened before, but i, ah, don't remember how i got rid of it. I know it's kind of a small problem, but it's really driving me crazy.

Thanks.
 

A:Solved: microsoft word (2003) files keep showing this after every line: ¶

8 more replies
Answer Match 60.48%

I've got a document about 41 pages, broke into multiple sections. Track changes have been on, I've been able to edit the file for a while up until an hour. Now, when i make any changes this document just closes, this has been tried and same phenomenon occurs on 3 other computers, so it must be something with the file? Any idea would be appreciated.

Some interesting characteristics:
when change is made word shuts down.
but when you use auto recover and word opens back up, the change that caused word to close is actually made.
 

A:Microsoft Word 2003 closes in error when I make a change with track changes

do you have the remove hidden data feature installed and turned on?
Otherwise, I would suspect a corrupt Normal.dot file - close Word, find and rename or delete it (Word will rebuild it when you open it again).
 

1 more replies