Tech Problem Aggregator

Order of Pages Printed

Q: Order of Pages Printed

Don't print much multi page output, so am NOT sure when this problem began.

Originally, the pages on my HP DJ855C were printed as expected: page-1 first, then page-2, etc; this resulted with page-1 being on the bottom of the stack. Depending on the application being used, there was often a Print-Order option available for Back-to-Front printing so that the last page would be printed first and then page-1 would be printed last and be on the top in the stacker.

NOW, things seem to have reversed:
If I do NOT ask for the Back-to-Front, then I seem to get it anyway (i.e., page-1 last and on the top). but if I want the original order (i.e., page-1 first and on the bottom) then I must use the Back-to-Front option.
It seems as though the default has become Back-to-Front and then selecting the option for Back-to-Front re-reverses the order and the result is Front-to-Back.

Possibly this reversal happened when I went to Win/XP; possibly it happened with the installation of some piece of software.

Q. Has anyone else had this exxperience?

Please tell me where I might change some parameter to make the option of Front-to-Back actually print the page-1 first like it did originally?

Any advice apprecaited.

Thanks,,

A: Order of Pages Printed

Digger,

Go into your printers and faxes options off of your start menu.

Select your printer, right click the mouse and click on printing preferences.
On the features tab at the bottom there is a option for start printing from last page. If there is a check mark in the box next to it, click there with the mouse and uncheck it and then click on apply and ok and you should be all set after that?

1 more replies
Answer Match 70.56%

Whe printing multiple copies from Word 2003, (SP-3) Service Pack 3, all pages come out of the printer blank. This happens on my Canon Imageclass MF5550 printer but not on my HP 8100 inkjet. Printing from email, wordpad and notepad work. I reinstalled Word and the Canon printer driver to no avail. I called Canon tech support and they had me print from Wordpad and since it worked they said it's not their problem.

More replies
Answer Match 65.1%

I have Windows 98SE with a HP 842C Deskjet printer.
Does anyone know of any program that would allow me to see how many pages I have printed since the last ink refill?
 

A:Counting Printed Pages??

Bump
 

1 more replies
Answer Match 65.1%

The problem I am having is that when I go to print tax return forms from the IRS site or New York Tax Dept site, the form prints "short", that is, the last four or five lines of each page do not print.

You cannot save the data in these forms, they will only save as a blank form. Your only option is to print it.

However, although Adobe tells how to cure this problem ( by clicking File-Print and going down the menu which comes up to "printer scaling", then chosing "print to fit page", this only works if there is a
FILE menu on the left hand side of the page.

In these tax sites, the forms do not have a tool bar above allowing you to chose a FILE menu.
You can right click the mouse and chose PRINT, however it will print a cut off page.

SOOOOOOO ..how do I either:
1. Get a standard Tool Bar to appear on top of the form, on these web site pages, or
2. use some other device or method to print these documents to fit the page.

If any of you are about to suggest right clicking on the printer icon PRINTERS, in the control panel, forget it....my printer does not bring up anything about "Print Scaling".

Hopefully, some geek out there will read this and solve my problem. Thank you. 44 Guy

A:printed pages cut off at bottom

Every computerized tax form that I have seen...is available at the website of the sponsoring governmental agency...and reflects a printed version option which has resulted in everything being printed properly.

I'm not sure where Adobe figures into tax preparation.

If you are using a 3d-party app to do taxes...then the problem resides with the support for that application, IMO.

Louis

http://turbotax.intuit.com/support/iq/TurboTax/Install-Adobe-Reader/GEN12226.html

4 more replies
Answer Match 64.26%

Other than using View>Text Size, is there anything I can do that may cause the print to be darker? I know that my eyes are beginning to grow weaker but perhaps someone knows a trick for me to use or an answer. The light print seems to occur on most web pages and very bad on my ISP webmail account. My signature will tell you I am using WinXP Pro and SP2. If all pages were as clear and dark as the print I am seeing while typing this thread, I would not be asking for help. As always, TIA
 

A:Solved: Pages Appear To Be Too Lightly Printed

7 more replies
Answer Match 64.26%

Hi, when I print anything from the web (Amazon receipt for example) the 'Print preview' and actual hard copt print appear as source code (similar to lots of DOS type commands etc) and very small print size. Only happens in Internet Explorer 7.0 -tried using Firfox and that appears okay- any suggestions -anyone? (thanks in anticipation)
 

A:Printed Web pages appear as source code?

open IE, click tools > internet options > advanced tab

click the reset button

This will put everything back to default options and all is good!
 

2 more replies
Answer Match 64.26%

Hello TSG!
I am looking for a solution (maybe a registry setting) to not allow XP to print, say, more than 30 pages in any one print job. Any ideas?

Thanks!
Curtis
 

A:Set Max Number of Pages to Printed at a Time

Any ideas? Found some software online that is far beyond what I need.
 

1 more replies
Answer Match 63.42%

Hi All, Please Help !!!!!

I set the printer to Fast Mode. After few month used, now every day morning I print.
The first few pages printed are not clear (especially black color), then the following pages are printed fine. Why ??????
 

A:HP BusinessJet 2200 First Few Pages Printed Not Clear

I'm guessing that the ink jet ports are drying up over night and it takes a couple of pages being printed before the ink is flowing correctly. I think using fast (draft) mode send less ink to the heads or less ink is available because you are printing faster.
 

2 more replies
Answer Match 63.42%

When I print I am getting a blank page between each printed page. Even if my document is one page it prints a blank page after it. I can also print a selected page, as in "print page 2" but it still prints a blank after it. The blank page does not show up on the preview.

I have a HP Deskjet D1300 and am running Vista Home using Word 2007. Is it a printer problem or a Word 2007 problem? Any suggestions?
 

A:Getting un-wanted blank page between printed pages

I think you may have the printer set to print separator pages.

Look around in your printer properties (Control Panel>Printers>Printername>>Right Click>Properties) and disable.
 

1 more replies
Answer Match 62.16%

Hi
We have a need to find out quickly who is printing and how mucha are they printing to a particular printer. We enabled logging of all spool activity to the event-viewer which records all the printing which takes place through the Printer and gives quite a concise description of what was printed. Is there a way that we could transport this information to some sort of a file where we could get a clear indication as to who has printed and how much as well.
 

More replies
Answer Match 62.16%

Hello everyone

I recently installed Outlook 2010 and I have got the following strange problem and I was wondering
whether anyone else had the same problem and found a solution.

Whenever I print an Outlook email, the pages come out in reverse order (page 2 then page 1) with a blank cover page which sometimes has "Microsoft Outlook - memo style OUTLOOK.EXE" printed
on the middle of it, and a blank sheet between each page of the message.

It only happens with Outlook. Printing is normal with Word, Excel, etc.

Any suggestions, please?

A:Outlook 2010 emails being printed with blank pages between each page

In Outlook please go to File - Print, highlight Memo Style, then click Print Options button above. In a new window Print, hightlight Memo Style again. Click Define Styles... In a new window, make sure that Memo Style is hightlighted and click RESET button.

If this wont help, click Edit button in the same window, and make sure all the parameters make sense and are correct (page size, etc.)

3 more replies
Answer Match 58.8%

I have an Access database used on daily basis to enter and print the maintenance work order in a report format. I have assigned a command button to print the required record. On clicking the button in the Form, a parameter query will run asking the user to put the record number to proceed. Once the correct record number is entered in the parameter text box, the report is previewed and the user click on the print button to print the same.

My question is as follows:

Is there any method to find out the record i am going to print now was already printed before? A kind of record keeping for the printed records.

Also, a message box should warn the user saying incase if the record was already printed, ďThe record was previously printed, do you want to continue printing again?Ē

Please tell me a way to perform the above in my Form.
Thanks,
Hash
 

A:Record keeping of the printed records & warning user when printed more than one time

could't you just add a field in the record for printed?

Then if printeed true, show warning, else show printable form.
 

2 more replies
Answer Match 53.34%

I need an Excel macro to print a set number of rows from a spreadsheet based on user input. I have attached a sample input file. Each ten rows represents one label. For each 10 rows of data, I want the macro to prompt the user and ask: "How many labels for 5/4X6X12' GROOVED (the description field for each set of data) do you need? So, even though this item shows a quantity of 16, the user may only need to print 2 sets of this data. If the user answers "2", then I need to print 2 pages each having the 10 rows of data that goes with that description:

Type: Delivery
PO #: 38505 SO #: 121046
Ship to: WORK SITE - LOT 3
Address: LOT 3 DALE SUBD
Item: ZZAT0000030621
Desc: 5/4X6X12' GROOVED
QTY: 16 EA
Created by: Rsmith
Ship Date: 11-SEP-14

Any help on this macro would be greatly appreciated. Thank you.
 

More replies
Answer Match 45.36%

The Windows Photo Viewer will not display photos in the order they are sorted by Windows Explorer.
This is not referring to the slide show feature, just the forward and back arrows.
The only order pictures can be viewed is by name despite Windows Explorer being set at view by date, ascending.
I have repaired Microsoft Live Essentials, uninstalled and reinstalled but the issue remains.
This is also not an issue with photo tags or photo names.
Windows Explorer sorts as selected but click a picture in the middle to view, click the forward arrow and instead of the next date picture being viewed, the next name picture is viewed.

A:Windows Photo Viewer; sorting order not the same as view order

Hi!

I upgraded to Windows 10 recently as well, I have the same problem and I also have a solution. However, I do not know, if it is ideal. :-)

What is obviously missing is an entry in the registry called DropTarget. This entry tells Windows Photo Viewer to display the images in the sorting order of the folder Photo Viewer got called from.

Non-solution:
I saw that at least in my registry there is a DropTarget defined in HKEY_CLASSES_ROOT\Applications\photoviewer.dll\shell\open\DropTarget. From the name of the key and from reading the docs this looks as if it would be applied to all calls to this program, but -if that actually is the case- for me this entry does not work. It has been there (at least) after my Windows 10 upgrade, also the "Clsid"="{FFE2A43C-56B9-4bf5-9A79-CC6D4285608A}" seems to be fine, but it does not do the job.

Solution:
For me, this problem was present for jpg and png files, but not for bmp, dib, gif, jfif and what else can be opened with Windows Photo Viewer. To fix this, I have added the following to the Windows Registry:


Code:
[HKEY_CLASSES_ROOT\jpegfile\shell\open\DropTarget]
"Clsid"="{FFE2A43C-56B9-4bf5-9A79-CC6D4285608A}"

[HKEY_CLASSES_ROOT\pngfile\shell\open\DropTarget]
"Clsid"="{FFE2A43C-56B9-4bf5-9A79-CC6D4285608A}"
After you added that to the registry, rightclick a jpg file, select "Open with", choose Windows Photo Viewer and click "Always open with this ... Read more

17 more replies
Answer Match 44.52%

I have 400+ photos, all are in the same order by date created and by name, so no matter which way I sort them--by name or date created-- they are in the same order. When i view them with microsoft office picture manager, some of them -- about 20, at random throughout the list -- are out of order.

suggestions?
 

A:Photos in order on windows explorer; out of order on viewer

8 more replies
Answer Match 40.32%

How I can change the name that appears at the top of email messages when I print in Outlook 2002?
 

A:Name at top of printed emails

6 more replies
Answer Match 40.32%

This is something that has been bugging me for a while now, and I've been unable to solve this problem. Perhaps someone out there can provide some guidance.

Sometimes, I'm unable to print things (such as online coupons) because I'm told that my printer is set to "Keep Printed Documents." I've tried disabling this setting via the Advanced tab under the printer's properties. However, when I do this, click Apply then OK, and close the tab, the setting automatically reverts back to "Keep Printed Documents". Does anyone know why this is happening? It's sort of frustrating to not be able to set the printer settings the way you choose.

I appreciate any tips/suggestions you might have. Thanks!

Bubba
 

A:Keep Printed Documents

9 more replies
Answer Match 39.9%

Whenever I print out an email from someone, the resulting document prints my first and last name (Outook Express) in the top left corner. I would like to orevent this but have searched in the Options and cannot find how it got there or how to permanently remove it. Can someone please tell me. Thank you.
jy
 

A:My name on printed emails not wanted

It is using your user name for the header.
You can change this in the account settings.

Not sure if you can turn this off.
 

2 more replies
Answer Match 39.9%

I'm new here!

First I would like to say I'm a TBI survivor and I'm a male and 42 years old .
I was purchased an emachine computer with a Lexmark lasar printer,
Whenever I go to print something, be it a web site article or a personal document that was created using Microsoft Works Word Processor. Whatever is being printed my name appears at the VERY top and the city and state printed at the bottom.
I know little about computers so I'm trying to get an answer why this is being printed.
The only thing that I can come up with is MY NAME, CITY and STATE was somehow entered on this computer's Hard drive and is prints it because it's been entered by someone at the store before iyt was brought home and set up for me.

If there is someway that I can delete this info. being printed, PLESE tell me what to do EXACTLY!

Thank You!
Chaz-62

A:I'm new her! Why is my name, town and state being printed?

That's very strange, it sounds like a 'Header and Footer' has been set up with that info and is in your normal.dot template. (If Works uses such a template, I know Word does).
Try doing a Find (or Search depending on your version of Windows) for normal.dot and rename any found to normal.old. Then test the printing again. If there is a problem you change the names back again.

hth

3 more replies
Answer Match 39.9%

Hello Team, When I am trying to select eqal (=) to button on which it is printed, it is not getting typed whereas when I am selecting some other button eqal (=) is getting printed. Please help me in solving this issue. Regards,Nizam

More replies
Answer Match 39.9%

I am unable to print pictures completely. I print them from Picasa on HP photosmart C4250. When I try to print, although the preview is correct, the printed result is not. Part of a picture will come out, or the image starts at the end of the paper and is therefore incomplete. Until now, everything worked properly.

soslow24
 

More replies
Answer Match 39.9%

when i tried to print photo from (user administrator)windows7 photo viewer there appear print picture windows without photo preview(seems busy) and after some seconds five repeated error messages "your picture cannot be printed because of this error occured" appear. It is working in user account Guest. printer and its driver is okay(updated). whats wrong with my windows 7 photo viewer? please help me

A:your picture can not be printed because of this error

From Windows Answers:






I believe it is a problem with the "photowiz.dll" file in system32. It is version 6.x.xxxx.xxxx. I found an older version of this file, had to change the attributes and permissions of the file to allow it to be changed. I renamed it with an "dlx" extension and then copied a version 5.1 photowiz.dll to system32 and the print wizard works again! The site I got the file from is: http://www.dlldump.com/download-dll-files_new.php/dllfiles/P/photowiz.dll/5.1.2600.2180/download.html



Try Googling your problem first. Hope that helps

7 more replies
Answer Match 39.9%

I have searched to find an answer to this problem of faded pictures when printed from windows photo gallery. I have seen a few others having the same problem, but no solutions. I am hoping that someone now can help.

I can print pictures from other software on my computer, from the internet, etc, with great photo quality. When I print from Windows photo gallery they are very light and faded looking. I have made sure the adjustments are for my printer.

It seems that most of the people experiencing this problem had canon printers. Does anyone have a solution to this?

Thanks
Pam

A:faded printed pictures

I have found the solution to this problem, you need to untick the checkbox for "borderless printing", this is how to do it:

SOLUTION:

When you click print, go to Options > Printer Properties

Click on the "Page Setup" tab, then Untick the box that says "Borderless Printing"




I love Myriam the little bunny

1 more replies
Answer Match 39.9%

I have 3 print queues that are retaining the printed jobs in the queue and every now and again the damn thing prints all the job again. I have checked that the keep printed jobs button is NOT checked/selected, but the queue acts ilke it is selected to keep printed jobs. I have 125 printer queues and only 3 act like this and they are set up identical to the others. I have reconfigured this twice on all 3 and they still act like they are set to keep printed jobs in the queue.

Anyone seen this and know of a solution, on the Microsoft site I am seeing posts but not a single reply about how to either run a job to clear them out a couple times a day or fix this so they act as configured. To NOT keep printed jobs in the queue.

Any help as always is much appreciated.

The race to solution is on, let's see who can figure this one out first.
 

A:printed job remain in queue

7 more replies
Answer Match 39.9%

I scan a document( on a hp 1315 all in 1) that is 8.5 X 11.00 but when I print it it is 8 X 10.25
how do you get it the original size? I tried resizing it in photo shop but cant get it. I have vuescan but still wont print out 8.5 X 11.00 ???????????????/
 

A:Scanned document when printed out........

16 more replies
Answer Match 39.9%

Hi all,

Well not sure if this is the right area for this but not really sure what the problem is.

When I boot my PC during the bootup dos stage I hear my PC making noises, it still boots up Windows 7 ok but as soon as I open something I get continious R type accross my screen, If I hit the caps lock it changes from R to r.

Thought it was my keyboard having the R locked down so tried to fix it, no luck. Changed keyboards with my spare one no luck. Disconnect all keyboards no luck.

So where is this R coming from, its impossible to us my PC at the moment as soon as you click somewhere (word, exel, Google etc) an R/r appears.

Any ideas where to start?
 

A:Continous R being printed in Windows 7

8 more replies
Answer Match 39.9%

hello all,
Im using access 2010 and there is a print of a report like a certificate whenever needed. My office is requesting me to provide a report of all certificate printed including the date and to whom .
my only way to do this is to force users to enter a field print (yes/no) and from there the query "yes" and the report be printed.
Is there any way to do this without forcing the user to enter the yes/no. field.
Thanks
 

A:Try to record printed records

6 more replies
Answer Match 39.9%

When using my picture it! publishing....when I add a border to a picture it comes out distorted when I print them out. With no border it prints out great.

Any ideas why this is happening?
 

More replies
Answer Match 39.9%

I have the names Charlie Lori Jo, Printed in the top left hand corner of everything I print.
I don't know how it got there, and dont know how to get rid of it.
Can you help me?
Chuck.
 

A:Solved: Printed name on paper

16 more replies
Answer Match 39.9%

Other than dogging the print preview, and struggling with the size in any pertinent image editing software, has anyone found a reliable way to limit or control the size of a printed web document?
to wit:
I scanned an odd shaped document, 3x8" to email to myself at another site, and the printed form was big enough for two pages. What a waste.
I print receipts regularly and they, 99% of the time have a "trailer" on a last page that has stuff like web site address or URL, a Secure Website emblem, or other, clearly unnecessary printing. My introduction to Windows word processing (WordPerfect) had, and I still use, a "makeitfit" command. Invoking such a command AUTOMATICALLY when printing from the web seems like a simple, brainless way to conserve paper...it'll give me a fractional font (e.g. 11.9 vs. a 12) and would prevent the idiotic tendency of a printed page to only have the leftward 80%, l which leaves off the important stuff like the prices...(you gotta print landscape to avoid this)
And I thought a computer was to make life easier, boy was I ever misled)
 

A:printed size of web documents

The problem is that web pages are usually coded to make them look good on screen, and that tends to make them "unfriendly" when printing.

Web pages designed for printing do exist, and it works well in those (few) cases.

Cutting and pasting into a word processor is sometimes the only workable solution.
 

2 more replies
Answer Match 39.48%

Fill color isn't displayed during normal viewing of a worksheet. When the worksheet is printed or print-previewed, the colors are visible.

Re-installed Excel, problem persists.
 

A:Excel XP - Can't see fill colors until printed

Go to your control panel and double click on Accessibility Options.
Click on the Display tabsheet and uncheck "Use High Contrast" then press OK to close that window. You should now be able to see color in your view mode.
 

2 more replies
Answer Match 39.48%

Using HP J4680 printer. Some of the pages I print size I print from web pages are so small it is hard to read the printed pages.

Is there a way to change the printed text size?

If so how?

Thanks

Gary
 

More replies
Answer Match 39.48%

Hey, I have a person here that has the problem that drawings that she has in her documents donīt print out. Iīve tried turning off background printing still same, Iīve tried printing it on my printer and that works.

Anyone have any idea on any settings or something I can change to make it work?
 

A:Images not being printed in Word 2002

Drawing objects (Tools - Options - Print) ticked?
 

2 more replies
Answer Match 39.48%

Gentlemen/Ladies,I?m not sure where to post this question so I?m plumping for this forum, knowing that it will be redirected if it is in the wrong place.Occasionally, when I open a website, its pages are too wide for my monitor and I have to scroll across to the right to see what is hidden from view. When I go to print the pages, I end up with just threequarters of the width of the script.I am using an HP LaserJet 1010 printer.I do not have this problem with all websites. Today, the offender is - http://www.explorenorth.com/whalers/featur...lecaptains1.htmWill the pages of this website be partly displayed on the monitors of all of the people who open it , or are my own ?settings? to blame. Please, how can I overcome the problem ?Yours sincerely, oldsoldier

A:Lack of printed script width

Hi oldsoldier.I get the same thing when viewing that page. My screen resolution is set to 1024X768. I found that if I went to View>Text Size and set it to Smallest the page almost fit. Have you used Print Preview in the File menu to see what the page will print like? You can also use Page Setup in the File menu to adjust the margins etc. before printing.

3 more replies
Answer Match 39.48%

I am so hoping someone knows the answer to this very perplexing problem... I thought it was my printer so I bought a new one and I have the same problem. I print a picture of my granddaughter, who has these wonderful chubby cheeks.........until it is printed and the chubby cheeks are gone. She has slimmed right down...... lol I have been struggling with this problem for quite a while now, have asked everyone who comes within two feet of me and no ones knows how to fix this or what is even causing it. I know someone here will know. I have never had a problem that this site has not been able to fix for me. : ) Thanks, in advance.

Oh yes, and new printer is an Epson 835 al-in-one and my old one is an HP photosmart 2575
 

A:Solved: quality of printed pictures...

16 more replies
Answer Match 39.48%

I have an Access report that includes a sub-report in whihc I would like to print the records on one row, rather than one column. So far, I have been unable to find a solution.

Example Record:

Job Number: 123456
Version(s): 001,002,003,004
 

A:Access Sub-report records printed on one row

7 more replies
Answer Match 39.48%

Problem: Green Cast on Images being printed
Editor - Elements Version 7 & Windows default viewer
Printer R285
Colour Management:- every variation tried

My Neighbour has a Epsom R285 http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Stylus-Photo-R285 printer, his had it a few years.
I have recently changed his PC to a Windows 7 desktop and installed all the drivers. The Printer worked fine, but yesterday he was getting a green colour cast on all images
I checked the head alignment, nozzle set-up and cleaned the heads
Checked with windows default viewer, and printing from that application - same problem
Checked all the Colour Management, ICC, settings etc - tried without Management, sRGB, adobe 1998 etc, checked colour management on printer and elements

The image looks fine on the screen , I have emailed a sample image and on my setup it prints fine

The next step was to try the printer on my laptop
any other ideas - this is usually a colour management issue and i have fixed quite quickly in the past on other systems - so I suspect I'm missing something obvious now
 

A:Green cast Images being printed

Wild guess .. Windows 7 software update for the printer ??
 

3 more replies
Answer Match 39.48%

I bought a parallel to usb printer cable to make my HP Laserjet 4L to work on my Vista dell laptop and it worked. Then I upgraded to Win 7 64 bit. Now it won't work. It sees it, installs fine, just won't print. no errors. Can it be a "cable driver" (never heard of such a thing until I started researching this problem) if it worked with Vista? It's a no-name cable, so won't likely have a driver that I can find.

Is there anything I can do but replace the cable?
 

A:HP Laserjet 4L printed with Vista, not with Win7

7 more replies
Answer Match 39.48%

I have an Access database used on daily basis to print maintenance work order. Each work order is assigned with an auto field No. I have a commend button assigned to print each record in a report format. On clicking command button, i enter the record number to be printed and it previews the report and check for accuracy of data entered. Once checked, i click on the print icon to print the same.

My question is, is there any method to find out the record i am going to print now is already printed before? A kind of record keeping of the printed records. Also, the same method shall help me to find out how many times each record is printed?

Hope someone can help me
 

A:Record keeping of the printed records

8 more replies
Answer Match 39.48%

I've spent the last four hours trying to solve this/use info that's similar to my problem to no avail. I feel I'm so close I can smell the answer is near!

I have a form I use for work that I manually have to fill in 50 times a day with mostly the same information. This is definitely a job for a computer!

Ideally, I would like to open the spreadsheet and have a button that says 'Print' and it will print what I need - 50 forms with the right information.

So far I have done the following:

Created a custom page size (16cm x 14.7cm)
Scanned an original to use as a background so I can line up the information
Adjusted the Excel boxes to print the info in the right place.

Now I need to print the following number ranges as identifiers:

1 - 22, 29-42 and 51-54

I feel I'm close with using this macro:

Private Sub Workbook_BeforePrint(Cancel As Boolean)
[copy] = [copy] + 1
End Sub

I use both Excel 2003 and 2007, depending on where I am!

I have NO experience of macros until today, so any advice is very welcome.

Regardsm

Jeff.
 

More replies
Answer Match 39.48%

I have had my problem for some time and had a work around which is no longer applicable hence I get a white screen where message should be so I don't know what is being said.

My problem started about 6 or 8 months ago on Outlook Express. At that time I was using dial up and changed over to Earthlink.net with their e mail program Total Access. My problem immediately disappeared. One month ago I switched over to High Speed and the person doing the custom install saw I used Outlook Express so he reenergized (non computer word) the program. The custom installer saw my INBOX with about 30+ messages that go back a long way. EACH ONE LINE description was complete, meaning To: xxx,
From: YYY, Subject: ZZZ, and anything else that showns on the ONE LINE.

When I double click on one of the inbox messages I FIND MY PROBLEM! Everything that showed before is shown again, but now greyed out since it has to do with basics. HOWEVER, the text area (where the message should be) is 100% pure white. I have double clicked all 30+ messages and get the same thing,...a pure white screen.

I thought it might have something to do with installing SP-2 on my XP Home Edition BUT SP-2 was installed about 6 months ago and my e mail problem started about 8 months ago.
That is my problem! Can anyone offer suggestions?
 

A:No Outlook Express Messages Are Printed

Hi George-2

Welcome to Tech Support Guy Forums!

So if I understand correctly, you can send and receive emails ok.

The problem lies in that the messages you receive are blank inside?

If you run your mouse over the inside of the message, does anything show up in the highlighted/selected area?

Perhaps your fonts have a white color?

Are you able to create a new message and see the fonts inside?

Let us know.
 

1 more replies
Answer Match 39.48%

How.
This question may look stupid.But please help me
Is there any way to save the documents or material from internet which to be printer
As i have no printer at home,I have to take that to my friend's house,where we can print.That pc has no internet
So i want to save douments offline and then print later using a pendrive
Windows document viewer is one kind of programme,that useful
Is there any other ways?
Please help me
Thanks in advance
 

A:How to save douments from internet which are to be printed later

6 more replies
Answer Match 39.48%

I have an HP Deskjet 920c that has worked fine until a few days ago. I tell it to print and the goes through the motions but nothing comes out. This means the printer icon is appears and says that it is printing but it does not. I have checked the power cords and the made sure that it is connected to the computer correctly. Any ideas?
 

A:HP Deskjet 920c says it printed but it didn't

13 more replies
Answer Match 39.48%

Can't find app that lets me get photos printed & delivered to me for Lumia 640XL

More replies
Answer Match 39.48%

I can't see the printed material that I send or what comes to me.

More replies
Answer Match 39.48%

Anything I print off the web or email says "Network + Job Functions" at the top of the page and the date at the bottom. Sure, I've been to websites pertaining to the job functions but I never saved anything with that name. How can it be printing at the top of any page?
If I print a document that I made and saved from Wordpad, not anything from the net, it prints fine with no header. I looked at the printer settings dialog box and it shows nothing with this title.
Thanks, Jim
 

A:Printed documents show same heading

If you are using IE, at the top of the page click on file and page setup and see what you have under header and footer. You probably need to change those.
 

1 more replies
Answer Match 39.48%

I doubt that I can post this question here but I assume it'll be removed if not.

I have an HP printer, 2540, wireless printer. Works fine.

I started to print a pdf file. Because it was a large file I choose the 'booklet' option, which prints 4 pages on one side, then, when everything of the even numbers (I think, not sure) has printed, you will get a message on the pc telling you how to replace the already printed pages in the printer so it can print on the backsides.

When I saw the first batch I decided I didn't like it. So when the message with instructions on how to replace the already printed paper, I went in the printer's menu, highlighted the name of the document and did 'cancel'. In this printer menu it now said it was 'deleting' the document. But it didn't. I waited about half an hour. I turned the printer off and back on. I closed the document. But still the printer menu said 'deleting'.

I opened the document up again, changed the settings for the printer (as in one sided, normal size) and accidentally hit 'print'. I then noticed that - in the printer menu - the 'new' document showed up above the one that still said it was deleting. But it still didn't print. I went in the print menu again and highlighted the new document and did 'cancel' and it did cancel it.

But the old document is still sitting there, 'deleting'. I can not get past that. Any suggestions wo... Read more

A:Cannot delete partly printed document from cue

There's a way to force these to delete, if you don't mind a little typing. You need to open a command prompt by running cmd.exe. If you're unsure of how to do that, tell me which operating system you're using and I can walk you through that. This should open up a black window, and you need to type in the following commands sequentially, hitting the Enter key after each command.
net stop spooler
del %systemroot%\system32\spool\printers\* /q /f /s

net start spooler
The first command stops the printing service, allowing you to carry out the second command, which deletes any jobs in the queue. The last command re-starts the printing service, and you can try running a test print. Once that's all done, you can just close the black window.
 

8 more replies
Answer Match 39.48%

I'm trying to print images/pictures using windows photo viewer and I get this error "Your pictures can't be printed because this error occurred".... It doesn't tell me which error.. simply just says that in the dialog box. THe dialog box comes out like 4 times with the same message and I have to click OK.

I've already tried googling it and the only fix I can find is replacing photowiz and I already did but it has fixed. I've also installed Photo Gallery and it stil lgives me the same error when I try to print and picture. I've also reinstalled all my printer drivers...
Windows 8.1 Updates installed . HP Computer

A:Your pictures can't be printed because this error occurred

What is the mfg & model of the printer? How is it connected to the computer?

8 more replies
Answer Match 39.48%

Hi

I suspect this might be a fairly common problem. Whenever I print there also seems to be a block of about 5 fine lines printed over the text for about ever new line of text. Now I recently bought a new (high capacity) cartridge which costs a fortune, so I'm not too keen to buy another if it is the printer (about 6 years old) which is the problem.

Has anyone else had the same sort of problem?
 

A:Solved: Lines through printed page

Try cleaning the print heads, this is the normal solution to this problem.
 

2 more replies
Answer Match 39.48%

I'm running Windows 8.1 64 bit. I have a PNG file that exceeds the size of the page, 8.5 x 11, when printed. When I view the picture online it appears that it should fit the paper okay. I resized the file by %, pixels, and measurements (inches). I also changed the paper size to 8 x 10. Can somebody tell me what I am doing wrong.

Thanks
PapaK

A:Can not resize PNG file to fit paper when printed

Open a Word document of the desired size and import it there. You can also draw a box on the Word document and put it into there - it will fit. If you don't have Word, try Paint.

3 more replies
Answer Match 39.48%

I have printed photos from e-mails before, but never had a problem with moire patterns. This time I have a fine vertical line pattern that is not clearly seen unless you have glasses on that magnify them. Unfortunately, I wear glasses that bring them out. What can I do to prevent or get rid of the moire? Any ideas? Thanks, lilart
 

A:Moire from printed e-mail photos

It likely just a matter of the resolution of the email derived image vs the resolution of the printer. Does it happen with every image or just the lower resolution ones from the emails?
 

2 more replies
Answer Match 39.48%

Sir,
Thank u for ur support on my previous issue. I have an another issue, whenever I give print from an adobe reader file it shows the error message "Document could not be printed" . I have HP LaserJet printer model F2180. Kindly help on this issue.
 

A:adobe reader files could not be printed

If your problem is that Adobe Reader is unable to print, but other applications can print, I suggest that you uninstall Adobe Reader and then download and install it again.
 

1 more replies
Answer Match 39.48%

I have a problem with my Word documents. When I try to print them, the right edge is cut off. I thought it was my computer or my printer, so I took it to another computer, and the same thing happened.

The problem is in the files themselves. How do I change the files so they function as they used to? This has been the case with more than 20 files, which were made at different times.

My computer used to warn that the form I was using was too wide, and ask did I want to go ahead. I would select yes, it would print, and would look just fine. Now it does not ask that question.

Incidentally, another problem is that my files no longer end with .doc, but now say .rtf. All of my Word files changed in several ways at once.
 

A:Word Trimming Right Edge when Printed

11 more replies
Answer Match 39.48%

When i try to print something the documents appear in my print queue then are deleted before they even begin to print, my printer was working fine until yesterday and now this

Please help

Steve
 

A:Printer deletes documents before they are printed

G'day steviejay, sounds like you have an intelligent printer that is censoring your output!
That is a worry, I haven't seen that problem previously.
You might try having a look in your control panel, system, devices or device manager, with a bit of luck when you scroll down through all your devices you will find a USB printer, (assuming yours is usb) if you open that item you should see something like "this devise is working properly" which is a good start for troubleshooting.
There should be no yellow exclamation marks on this item.
Are you quite sure your print queue in the print manager is being actually deleted?
What kind of printer is it?
The assumption is that it is a PC using a windows variant.
Cheers, qldit.
 

1 more replies
Answer Match 39.48%

computer freezes, especially when going to facebook.com. I am getting pop-up ads. everything I print on my Brother MFC-440cn printer comes up with a watermark from "Spectrum Glass" When trying to download from your instructions for DDS I get a blank page and no download. I have included info that I thought may be useful.
 

A:lock-ups, pop-ups, and watermarks on printed material

Run the following:

Please download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatible with your system (32 bit or 64 bit). If you are not sure which version applies to your system download both of them and try to run them. Only one of them will run on your system, that will be the right version.

Double-click to run it. When the tool opens click Yes to disclaimer.
Press Scan button.
It will make a log (FRST.txt) in the same directory the tool is run. Please copy and paste it to your reply.
The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.

Thanks,

Kevin....
 

1 more replies
Answer Match 39.06%

Three days ago when I tried to print from the web and then WORD there was no installed printer. I checked and the printer was still installed but when printing a document the print screen said their was no printer installed. I checked and the print spooler was not working. So I downloaded the Microsoft tool MicrosoftFixit.Printing.Run.exe. I ran it and presto the printer worked but only once and when I went to print again, again the print box showed that there was no printer installed. So I have to run the Microsoft.Fixit.printing.run.exe tool every time I want to print a page then restart the computer. A royal pain and time waster.

Something is turning the spooler off and not allowing individual programs to see the installed printer and therefore reports that there is no installed printer.

2nd issue. this is a new laptop (ACER) and there is no LED light to show "Caps Lock". I did find a setting that flashes the screen and makes an audible beep. However, my wife has the exact same computer and hers has a 2" x 2" box appear each time she puts cap Lock on. Which is way less distracting than audible beeps and flashing screens. Is there a setting for this? I have not found one in the Microsoft website for Windows 7.

Help,
yarlac

A:Print Spooler turns off after each printed page

Stop the print spooler servicePress Windows+R key and copy this path%WINDIR%\system32\spool\printersclick okDelete the files in the folderRestart the PC and try to print nowFor second issueDid you install ACER launch manager? It is responsible for caps lock notifications

5 more replies
Answer Match 39.06%

When I print anything off a web page I almost need a microscope to read the print. This is a sudden development - although I haven't installed anything new or made any changes recently.
I can increase the font size on the screen OK, but whatever I print is still the same tiny sized printout on paper.
Appreciate some help and advice as to how to make my printout readable
Thanks !

IE7
Win XP Professional SP2
Dell Dimension 5000 (Pentium 4)
Epson Laser EPL-5800 and Epson StylusPhoto 870
 

A:Solved: How to increase printed font size ?

Hello
try this

file print preview and adjust the last button ...

mine is shrink to fit

You can choose a different layout
 

3 more replies
Answer Match 39.06%

I have Compaq vista laptop with HP deskjet3050A connected. As far as I can see the printer is not able to do copy enlarging, as my last printer did. I want to make a copy of a hard document with enlarged font size. Is there any "work-around" I could try to achieve this? Allan.
 

A:Solved: Copy and enlarge a printed document

It seems there are enlargement options. Have you see this link?
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02522553
 

3 more replies
Answer Match 39.06%

Hello,

When I print an email from outlook 2000 sometimes my attachements will appear on the print-out and sometimes they don't. I've found that if I have my emails set up in HTML format, then the attacment won't appear, but if the emails are set up in Plain Text format, then the attachment will appear (as an icon) at the top of the message. Is there any way to get the attachements to appear on the HTML formatted messages?

Thanks.
 

More replies
Answer Match 39.06%

I have a number of pre-printed forms with many blank spaces to be filled in. Rather than completing them all by hand, I would like to scan them into some software, like MS Word, then fill them in on the computer and then print them. I have Windows 7 Ultimate and an Epson Photo R200 printer. I have been unable to find a way to do this and would appreciate anyone's help/instructions as to how it is done. Thanks, wilemar
 

A:How to transfer scanned forms to be completed and printed.

11 more replies
Answer Match 39.06%

In Vista, one print job (the last) on a Lexmark will not delete from the queue. No new print jobs will print out. If there are more jobs created, they add up in the queue. I'm trying not to uninstall and reinstall, this has happened frequently with this printer, albeit with an inexperienced user. Please help. TIA
 

A:Print Jobs remain in queue although already printed

What happens when you try to delete it? Error message? Long, long delay?
 

2 more replies
Answer Match 39.06%

Hi all,

This should be an easy one, but I've been banging my head against it for a week. I'm hoping I've just been looking at it to closely and someone can take a look from a different perspective, smack me on the back of head, call me an idiot, and point to the obvious solution.

I'm trying to fix a home network. It consists of one desktop computer, two laptops, and a printer. The desktop is attached to the router by a cable, and has the printer, which is shared, and the laptops are wireless. Everybody is running Windows XP Pro, and this is Lexmark Z45 inkjet.

The problem is with printing. It worked until about a week ago, but now when the laptops send a job to the printer, it just sticks in the queue with the status of printing. The desktop can print, so it doesnít seem to be the printer. The laptops can see the printer, they can connect to the printer, they can send jobs into the queue, but then they just sit there.

Iíve reinstalled the printer on the desktop and the laptops, Iíve downloaded new drivers, Iíve restarted the services, Iíve attached to the share using the computer name as well as just its IP address, Iíve made administrator accounts on the desktop using the same username and password as the laptops use, Iíve made a separate printer account on the desktop and connected using that, and theyíre in the same workgroup.

Iím working on the assumption that has something to do with share permissions, so if anyone has any suggestions I ... Read more

A:Printed Documents From The Network Stick In The Queue

Which services did you stop and restart?
 

2 more replies
Answer Match 39.06%

hi my name is Sam i have had a printer brought me from parents all time i have had it has never printed. ink miss prints and bad quality i have read reviews which sound very positive but why is mine really bad

A:kodak all in one printer has nerver printed correctly

Did it ever print ok? Have you tried cleaning the print heads - there should be feature in the printer properties or Kodak monitor program to let you do this. Clogged heads are most common cause of bad quality printing. If it doesn't improve after several cleans, then best throw it away - printers are cheap, repairs are not.

3 more replies
Answer Match 39.06%

When I arrange the worksheet columns to be only as wide as they need to be, the print preview (and the actual print out) has extra space after (to the right of) the last entry in the cell. So a cell that looks like : |xxx|, when printed, looks like : |xxx |. Can that be remedied ? The work-around I have found, is to make the original columns too narrow, so that the rightmost contents are hidden from view - that is really a quite undesirable method, though it achieves a 'correct' printout.Bastymessage edited by Sebastian42

A:Excel 2007 printed columns is too wide

How are you setting the columns to be "only as wide as they need to be"? Are you manually setting them or are you doubling clicking the column separator so that Excel sizes them automatically?I have experienced times when setting them automatically looks good on the screen when viewing the spreadsheet, but prints differently than what is shown. It may have something to do with the print drivers (which I can't control at work which is where I usually see the problem) but I'm not sure.Are you sure that there isn't actually a trailing space in the cells?Have you tried changing fonts just to see what happens?I'm just tossing stuff out for you to consider since I can't actually test anything or see your spreadsheet from where I'm sitting.Click Here Before Posting Data or VBA Code ---> How To Post Data or Code.

12 more replies
Answer Match 39.06%

Hi all

I have a HP officejet v45, which has had new hp cartridges installed recently. Alignment page printed and aligned. Colours on tis page where as normal. After this I could only print about 30% of a page going across the page. Tried printing test page which again only printed about 30% of normal. Have uninstalled printed removed drivers and software via ADD/REMOVE PROGRAMS in Control Panel.

Have used both the installation disc and a downloaded set of drivers and software from the HP website to reinastall the drivers to no avail.

I need the printer to print off CV's for an interview for a new job over the next few days.

HELP please........

Tahnks for any help on this matter. I am using XP SP3, recent updated via microsoft website.
 

A:Printer test page half printed

7 more replies
Answer Match 39.06%

I have scanned a document to pdf and opened it with Adobe Pro 7.0. I chose the option to make the form fillable using Designer. I am able to fill in the form, but when I print it out, the form is not as crisp as the orginal document that was scanned. Are there settings that can be tweaked? If so, I can't find them. Before the document is pulled into Designer, it prints fine. It is degraded when it is pulled into the designer program.
 

More replies
Answer Match 39.06%

Hi, one of my clients is using the Epson ex 330 dot matrix printer on a windows xp sp 2 machine. Now this printer stopped working on this machine since the 24 pin port on the motherboard got spoilt. So I tried to connect this printer to this machine using a USB to parallel port converter. Now the thing is that the printer is added but when I try to give a test page print or any other print the print spooler shows 1 doument printing. But within 3 seconds it disappears and prints nothing with no error message. Another thing is that this printer used to run on the Epson LX 800 driver since there is no EX 300 driver is the default drivers list. And now I have added it on the same i.e LX 800 driver. But I don't think this should be any sort of problem. Expert help is appreciated. Thanks!!
 

More replies
Answer Match 39.06%

yearly renewal coming up.. I KEEP thinking of items read and thought I willgive latest for instance.. I know I WILL PUT ON THAT LITTLE PROG SHOWING WHEN WINDOWS IS FULLY AVILABLE.. [oops sorry arthritic fingers and bi focal] NOW where is it I wonder.. I WOULD PAY EXTRA TO HAVE SUCH An index FACILITY AS I DO VALUE THE WRITEN oops word especially for instructions. thanks

A:Search mechanism for 2016 printed PCA MAGS

I'm sure that makes some kind of sense to you, but I'm struggling to understand what it is you want to know.

1 more replies
Answer Match 39.06%

I use two printers at two locations w/different computers and have the same problem on both. Many (most?) web pages have info on left side of screen that I do not want to print (such as at this web site). When I print the page I get the left side panel and letters or words on the right are cut off which I need to fill in by hand. Some sites offer "printable view", but I don't recall having a problem with that. Probably not.
Is there a way to adjust the page so that all desired text is printed?
 

A:printed text cropped off at R side of page

9 more replies
Answer Match 39.06%

I wanted to extend my Eventlog (Event Trace for Windows) by an additional component where I just want to log strings. I am using code like the following one.
#include <Evntprov.h>
#include <evntrace.h>
#include <minwindef.h>

// {38F4122A-4D8C-465A-9EFC-F7E632A84ABF}
static const GUID MyApplicationGuid = { 0x38f4122a, 0x4d8c, 0x465a, { 0x9e, 0xfc, 0xf7, 0xe6, 0x32, 0xa8, 0x4a, 0xbf } };

REGHANDLE regHandle = nullptr;
EventRegister(MyApplicationGuid, nil, nil, &regHandle);

EventWriteString(regHandle, TRACE_LEVEL_INFORMATION, 0x0, L"Hello");
EventWriteString(regHandle, TRACE_LEVEL_INFORMATION, 0x0, L", ");
EventWriteString(regHandle, TRACE_LEVEL_INFORMATION, 0x0, L"world");
EventWriteString(regHandle, TRACE_LEVEL_INFORMATION, 0x0, L"!");

EventUnregister(regHandle);

I already have registered a provider with the given guid that shows up correctly and those events are part of the etl logfiles as generic events. To this point everything seems to be fine but when I want to add the message as a column I am not capable to
see the logged strings because they are stored in a binary payload element.
Is there a way to define an event/template to format the traces done with EventWriteString into a message string. Something like "%1"? (There is already a Header Flag STRING_ONLY set.)

More replies
Answer Match 39.06%

I have these consistent, straight, faded lines on the paper I print on when they come out of my HP Photosmart Inkjet printer. (Like as if there's a roller inside the printer which isn't calibrated, and doesn't put equal pressure on the paper). Has anyone had this problem, or know what I'm on about?

The printer is refurbished, second-hand off eBay but I don't think this has anything to do with it. I remember using a relative's printer and seeing the same lines in the past.

What gets me is that the inks are brand new, and not near empty...
 

A:Unusual streak lines on paper being printed..what are they?

I've seen stuff like that happen on epson inkjets when the heads are slightly clogged. May want to look into that barring any other suggestions.
 

6 more replies
Answer Match 39.06%

I recently acquired a Canon EOS Rebel T1i (500D) 15.1 mp. Previously, I had a Canon PowerShot A80 (4.0 mp).

Here's my question. Whenever I try to print a photo from my Canon i860 printer, the picture is a lot brighter than the image on screen (overexposed). I need to darken the picture significantly before printing it, in order to get a ressemblant result on paper. When I was printing a photo from my PowerShot A80, the result was almost identical to the image on screen.

Does this have anything to do with my new camera's higher resolution? Would I need to lower the resolution in order to match the printer's capacity?

This is becoming annoying and I really would like to find a solution.

Thank you.
 

A:Solved: Printed photo very different from on screen image

16 more replies
Answer Match 39.06%

One of our users (out of about 300) is having a problem printing messages from Groupwise. His messages are missing characters. Random characers, randomly spaced. The message views correctly, and even looks correct through through printkey (screen capture program). I uninstalled GW and reinstalled it. No help. I turned off integrations. No help. I turned them back on. No help. I uninstalled and reinstalled the printer. No help. I pointed it to another printer. No help. I'm about out of options here! Any ideas?
 

A:Groupwise 5.5 - missing characters in printed messages

6 more replies
Answer Match 39.06%

I have a cannon mp210 all in one printer,scanner. When placing actual photos into the machine to be scanned then printed they come out perfectly fine but when I try to print pictures already imported onto my computer they come out very faint/light. The computer keeps saying the ink levels are low which is incorrect as I have just put in new ones. I beleive this is a issue to do with the colour settings installed on windows 7 as our pictures print out fine when the printer is connected to our lap top. If anyone could help me with changing the colour settings that would be great. Thank you
 

A:printed picture colour quality poor

Have you made adjustments to the paper type and print quality?
 

3 more replies
Answer Match 39.06%

Recently the font size has doubled or tripled in size whenI print an email,I amusing OE and an HP 932C printer. I have look at all the settings andoptions of both and cannot find how to reset it. Any help out there? Thank you.
 

More replies
Answer Match 39.06%

I have a gradebook that is very different from traditional gradebooks. Each class is a separate file and then each student has their own worksheet so I can individually track their proficiency on a variety of tasks (By all means tell me if this is stupid and recommend an easier way). When I want to print out a students gradebook sheet for a conference, how do I get their name (which is on the tab, to print with the printed page?

Thanks
 

A:How do I get Worksheet tabs to print when sheet is printed?

Hi,

A short answer ...
Code:
ActiveSheet.PageSetup.CenterHeader = ActiveSheet.Name
A question though ... would it be somewhat effective to loop through all sheets in a file and do this? Also, how about looping through all files in a folder and doing this? Would it not be easier to do them all at once, or is this a 'one-shot deal'?

Also, btw, you can do this with LeftHeader, RightHeader, LeftFooter, CenterFooter & RightFooter. Other format attributes can also be added if desired.
 

2 more replies
Answer Match 39.06%

Greetings, I just purchased an Epson 4490 photo scanner and realized there is no printed user manual- just a very basic bunch of directions. They have an in depth guide on the Epson website but it is not an easy one to download and copy, and I find it very difficult to look online whenever I have a question about using this scanner.
I am wondering if there is anyplace I can get the in-depth printed user guide for this scanner. Printed guides are so much easier for some of us to use. If I had known there was no user guide I would never have purchased this scanner.I am hoping that someone other than Epson might print them,since Epson says they have no printed user guide. Thank you!!
 

A:Can I get printed user guide for Epson 4490?

I doubt you would find a printed version available if epson doesn't have it.
The online manuals are usually in PDF format and you can save them
to your computer so you don't have to download it every time.
Just download and open it,then click file/save as and save it to your desktop.
Of course,after that,if you want to waste the ink,you can always print it out yourself.
 

2 more replies
Answer Match 39.06%

The HP 4500 Envy all-in-one printer is new, replacing a defunct Canon Pixma. I received an electronic 1099 form, and printed it from my Foxit Reader program. To my dismay, the printed form was obscured by black bars in 4 places. These do not show in the print preview, and after experimenting for some time, I can find no setting that accounts for the problem. I went online and tried reprinting the 1009 form from last year. The same problem occurred, but my hard copy in last year's records ? printed from Foxit but using the old Canon ? did not have the offending black bars. So far this is the only pdf with which I have a printing problem, but the fact that it occurs with the same form for two different years is puzzling and annoying. Any thoughts or help would be appreciated!

A:Black bars on printed pdf witih HP 4500e

Considerable time online with HP support which included remote access to my computer was unable to resolve this issue. The tech seemed to believe that it was related to the site hosting the 1099, even though the same form had printed without problem from my previous printer. If the problem develops on any other form/pdf, I will have to explore this further. For now, however, printing the screen capture of the pdf will suffice.

1 more replies
Answer Match 39.06%

is it possible to print both sides of a page without manually putting the page thru twice?  Or is a duplexer required to be added to the printer.

More replies
Answer Match 39.06%

Hi All,

I dont know if i've got this in the right forum but i've got a WinXP Pro Machine so thought i'd try it here.

The problem is that my print queue seems to retain the print jobs although the print jobs have already been printed out (i've seen it retain jobs from 5 days ago). I happens from all sorts of programs.

My PC is acting a print server (ie, the printer is connected to my PC via Parallel and i have shared my install of this printer).

In the print queue, the status indicates "sent to printer" and Pages "x/x - eg 3/3" however the print jobs remains in the queue and do not disappear unless i manually do a "cancel". If i were to turn off and then on the PC, all these print jobs will print out again without any user interaction.

So, can anyone tell me if this is a driver issue or is it something to do with the printer or Parallel port configuration.

As far as i know, i've got "bi-directional support" selected but i'm still to find out what modes i've got parallel set to eg. EPP or ECP or both.

Any help would be great. thank you.

regards
Steve
 

A:Print Jobs remain in queue although already printed

9 more replies
Answer Match 39.06%

Hp Deskjet F2180 all-in-one
Windows XP
wierd problem, i do cleaning of my catridge by printing services all 3 options, clean, inetrmediate and prime, the result is perfect but when i print anything from a software, any text or photo from msword or photoshop or notepad, the printed out put is streaked and blurry totally unreadable. Is there anyway i can fix this at all
i am attaching 2 images, 1 is test page print and 1 is an auto print after doing the "intermediate clean", i printed the test page after intermediate clean
thx for the help
 

A:output streaked only when a document is printed from software!

7 more replies
Answer Match 39.06%

Windows 7, Windows Live MailWhen I print out an email there is a date stamp at the bottom of every page. How do I stop the date being added to the email?

More replies
Answer Match 38.64%

I used to be able to print off Jewel Case inserts of music that I had burned on to CDs but I am now having difficulty in doing that. I have a new laptop and am using Windows 8 and the latest version of iTunes. I seem to have tried every nook and cranny but to no avail. Is it still possible to print off the Jewel case inserts? All the info seems to relate to days gone by. Your assistance woul be appreciated.
the The
 

More replies
Answer Match 38.64%

Installed a bigger widescreen monitor but when I print emails (with WL Mail) the text is smaller than with old monitor. Don't understand it - went back to an email that I printed a week ago and printed again ... sure enough, the text size was smaller (the image contained, however, was the same size). Thought the font size (of text in an email) was 'fixed' when sent - so why is it different with a larger monitor.

Now, I did tell Windows 7 to display the text size larger (so could see it better on larger screen) ... but, if anything, I'd have expected printed size to be larger.

Any suggestions of what to do? (I know can copy email text to another file then go to NotePad ++ and change the size - then print ... but that shouldn't be necessary.)

{Not sure if this is right forum, so let me know immediately and I'll reopen in appropriate one}

A:New Widescreen Monitor - Smaller Font Printed With WL Mail

Hi Win7rap, I use WLM 2010. If no message is selected, text size can be adjusted on the 'View' tab.

9 more replies
Answer Match 38.64%

I created a simple two column daily schedule for work. when I printed it, there were crooked triangles that appeared...yet they were not seen on my work before printing. There are 4 of them.
Any ideas how to get rid of them? thanks!
 

More replies
Answer Match 38.64%

I'm helping to develop a web application that uses iframes. On the main page (outside of all frames), we have a div that we use to display and print forms. We also have 2 nested iframes; the innermost iframe contains the main page content. When printing, we use extensive CSS and Javascript (contained in the outermost window) to hide everything except the print div.

When I use File > Print Preview, it always displays the correct preview; that is, the outermost window which contains the print div. Printing from the Print Preview works as it should. However, when I use File > Print, it seems to print whatever window has focus, not the entire page (outermost window). Therefore my print div doesn't get printed and all I get is a printout of whatever is currently onscreen. Why doesn't the print out from File > Print match what is shown in the print preview?

A related issue occurs when using JavaScript's window.print(). When I call window.print from within the print div, it prints as it should. But when I call parent.parent.window.print() from within the double-nested iframe, IE still only prints the window that has focus, not the outermost window (as shown by "parent.parent."). And since they just clicked on a button in the innermost frame, the innermost frame has focus, my print div doesn't print and all I get is a printout of whatever is currently onscreen. I have been using "parent.parent" for all other Javascript calls from the nested iframe to th... Read more

A:Print Preview doesn't match printed document in IE 8 & 9

Have you checked out how other people deal with printing on web?
Take Gmail, for example. When you click on Print link they open a new tab with desired content, which shows print window immediately on opening.
Code:
<html>
<head>
bla-bla-bla
<script>
function Print(){document.body.offsetHeight;window.print()};
</script> </head>
<body onload="Print()"> ...
or for a new tab other companies do more direct
Code:
<body onload="window.print()">

1 more replies
Answer Match 38.64%

Hi, I have a user on a XP pc with Office 2007. He is having problems when he is printing a graph - some of the details on the Y axis are missing and also the graph header (see example2). Looks OK in print preview and also if he prints to a PDF file (see example1). Same result when he tries otehr printers from the same pc and old files containing graphs have the same problem. If he selects the graph and prints, then it prints OK but this is not really an option when he has multiple pages with multiple graphs.

The same documents on 2 other PCs prints OK.

Any ideas on what is causing this ?

-iem
 

A:Solved: printed graph missing some Y axis and header

I had that same problem. I uninstalled the Excel updates I had automatically installed on 12/15 and the problem went away.
 

2 more replies
Answer Match 38.64%

I am accessing an HP Laserjet 4650 via network and everything works great except for when I try to print out 2 or more copies of a 36-page PowerPoint presentation. I have both checked and unchecked the Collate box when I'm about to print, but neither seems to actually collate the printouts; it always prints out pages like 1, 1, 2, 2, 3... etc.

Any insight on this would be greatly appreciated.
 

A:HP4650 LJ Printer - Will not collate printed PowerPoint slides...

I tried the same in other programs, and no matter which program I print from, it neglects to collate the pages, whether or not I select Collate or not.
 

1 more replies
Answer Match 38.64%

I have a generic worksheet created from a Word Template (Bill of Lading Template if that helps) and I want to have the user enter input such as address to, PO #, CO #, Quantity of Pieces/Lbs, i.e. only certain boxes of the table. Once the user prints this form, I would like for it to clear only these certain boxes. Is there a macro I could create to do this? I created one so that it clears the boxes, but I am unsure if I can make one that automatically runs once I click print. Any help you can give is appreciated.

Thanks
 

A:Creating Macro in Word to clear worksheet one Printed

Hi, welcome to the forum.
If you already have a macro then all you need to do is trigger it once the sheet is printed.
You can do this by using an event.
I would have to look it up, but if you Google for Worksshet on event print then you need sometinh like AfterPrint .
I'll see if I can find something but you could try a search via Google and see what you can find too.

Just fopund this one ...
http://tipila.com/tips/116/afterprint-event-in-excel-vba

Maybe it can give you an idea
 

1 more replies
Answer Match 38.64%

I have a HP C4850 configured to work through the wireless. I can ping the printer and access its internal web page. Network configuration prints out no fails or errors so as far as I can tell everything is configured correctly. If I send it a print job, a small notepad document with the text "test" in it, it won't print. Eventually it just seems to forget the print job is there. However if I send the job, then print the network device configuration, the print job will print immediately after. I did this 3 times and it was consistent in its behavior. I'm at a complete loss, any ideas?
 

A:HP C4850 won't print until network status page is printed

Any ideas of where to start?
 

1 more replies