Tech Problem Aggregator

Windows update gave me the emergancy stop blue screen

Q: Windows update gave me the emergancy stop blue screen

i was doing some windows updates and i got the blue stop screen where it says "if this is the first time you have seen this message..." blah blah blah you get the idea. Why did this happen? any thoughts are much appriciated thanks.

A: Windows update gave me the emergancy stop blue screen

Is this computer a new built ?

2 more replies
Answer Match 82.32%

Hi there,
I have a windows 7 box that recently gave a blue screen that had options to F11 restore, which it did not respond to, after pressing F10 it would eventually start windows. I did a system restore from windows to April 28th this was the earliest point I found, but after it successfully completed when I restarted it went to the same blue screen. After going into windows again, I downloaded and ran Malware Bytes, Super Anti Spyware, and CCleaner. I then rebooted once again the blue screen. Checked firewall service it is on and automatic, checked Background Intelligent Transfer service it is started and automatic and security center is on and automatic. The firewall is on. I am wondering that if the computer had a virus that did something to system files or a file is missing is it possible to add that one file?
Thanks for your help,
Yaz

A:Help, Windows 7 box that recently gave a blue screen

I was able to get to F11 and did a system repair and it gave a message of repaired 1 and it said something about OS missing from system or drive and it also said completed successfully, but when I rebooted it still shows the blue screen with options. f9 f10, f11 (which takes about 15 min to open anyone of these options). Does this mean it did not fix what it found and I am going to have to do a clean install or is there something else I can do?

4 more replies
Answer Match 73.08%

Just installed the new antivirus on my vista yesterday and rebooted. Got a blue screen next with error 0X0000007B. Can't get to safe mode, vista recovery cd doesn't work, boot cd doesn't work, I'm left with no options. Please help.
 

A:Kaspersky gave me blue screen of death

9 more replies
Answer Match 71.4%

We went from Windows 8.1 to Windows 10, months ago (when we kept getting the pop-up to get the "free" upgrade").Yesterday, while Windows was updating, it would not return to the home screen, but instead, kept cycling on and off with the same window coming on: Your PC ran into a problem and needs to restart. We'll restart for you. Stop Code: FAT FILE SYSTEM...Can't get past it,  other than to the Bios. Made a Windows 10 USB Flash Drive to try to repair.  changed the boot order to accomodate, but once it starts to install, the cycle immediately starts again.Can't find ANYTHING on the internet to help.  The drive seems to work, since I had to take it out and use an SATA/IDE to USB cord to pull data off it, so I was able to see the drive on another computer.Need help as to what to do and how to get past it.  Whatever you suggest, I can bet I tried it.  Just want to format the drive using the Windows 10 USB and get rid of everything to start anew, but it won't get past that window. This is my daughter's computer and she really needs it.  If anyone can help with this, please help. Thanks! 

More replies
Answer Match 66.36%

I get a blue screen msg after i start up my Dell Mini PC. It says something like: Windows detected a problem with your computer and shut Windows down to prevent further damage to your computer...My comp was fine last night so what could cause something like this? Also, it runs fine under safe mode.
 

A:Blue Screen Windows Stop?

16 more replies
Answer Match 65.94%

I have a Dell Dimension C521 , XP , Service Pack 3, Mcaffee
Started up computer and instantly clicked on Weather Bug in my google sidebar . I got a message that said something about --- Windows XP will have to do an update. Computer will shut down and any unsaved info will be lost --- and then the computer shutdown . It could have been an update or the weatherbug.com .
Now I cannot access internet . macaffee , or help center . My task bar also dissapeared but I got that back . If I try to open Malwarebytes I get a error message that says -----
Run-time error '372':
Failed to load control 'vbalGrid' from vbalsgrid6.ocx . Your version of vbalsgrid6.ocx may be outdated . Make sure you are using the version of the control that was provided with your application .

A:weatherbug or windows update gave me a bad one ?

Hello can you first try a Syem Restore to a date before the update.. Then try updating and runng MBAM.

7 more replies
Answer Match 65.94%

Hi everyone.

I noticed I had a windows update (that small globe that appears on the botton right of your screen) so I let it download. When it said it was ready to install, I let it install. During the installation, a Norton window pops up and says that it found a trojan horse virus. Details are:

object name = c:\winnt\system32\iosdt\iosdt.exe
virus name = trojan horse
action taken = unable to repair this file

Here's a hijackthis log that I ran:

C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\WINNT\system32\msiexec.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE
C:\Documents and Settings\Administrator\My Documents\My Downloads\Spyware Remover Tools\HijackThis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://jump.altavista.com/avie5/searchpane
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://www.altavista.com/
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://sympatico.msn.ca/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://www.altavista.com/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Bar = http://jump.altavista.com/avie5/searchpane
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://www.altavista.com/
O2 - BHO: HelperObject Class - {00C6482D-C502-44C8-8409-FCE54AD9C208} - C:\Program Files\TechSmith\SnagIt 7\SnagItBHO.dll
O2 - BHO: CCHelper - {0CF0B8EE-6596-11D5-A98E-0003470BB48E} - C:\Program Files\Panicwar... Read more

A:Windows update gave me a virus!!!???

Hi and welcome to TSG

Download Pocket Killbox from here:
http://www.downloads.subratam.org/KillBox.zip
Unzip the files to the folder of your choice and place a shortcut to the program
on the desktop.
~~~~~~~~~~~~~~~~~~~~~~~~~~

Click Start > Run > and type in:

services.msc

Click OK.

In the services window find distributed.net client (dnetc) and ZESOFT
Rightclick and choose "Properties". On the "General" tab under "Service Status" click the "Stop" button to stop the service. Beside "Startup Type" in the dropdown menu select "Disabled". Click Apply then OK. Exit the Services utility.
~~~~~~~~~~~~~~~~~~~~~~~~~~~

Copy the BOLD to notepad...save as "fix.reg" save as "Type" *all files*

REGEDIT4

[-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\distributed.net client]

Double click "fix.reg" and answer "yes" at the prompt to merge.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reboot into safe mode by following instructions here: http://service1.symantec.com/SUPPOR...2001052409420406?OpenDocument&src=sec_doc_nam
Then as some of the files or folders you need to delete may be hidden do this:
Open Windows Explorer & Go to Tools > Folder Options.
Click on the View tab and make sure that "Show hidden files and folders" is checked.
Also uncheck "Hide protected operating system files" and untick "hide extensions for known file types" . Now cli... Read more

2 more replies
Answer Match 65.94%

Downloaded 5 windows updates 2 days ago. They install, as usual, upon shutting down my computer. Tried to turn it back on about 5 hours later to do homework. Immediately was taken to the black safe mode or normal mode or etc. choices screen. Tried every option, goes to XP load screen with green load bar for a second, then for a fraction of a second the BSOD appears, then it's back to the black screen asking me to choose safe mode or normal, etc. Does the same thing every time without fail. Tried shutting it down and restarting. Nothing's working and everyplace I look online seems to need safe mode to work or access to my computer in order to work. I've got nothing.

Also I do not have the disks for Windows XP to use because it cam pre-installed when I bought the laptop 3 and 1/2ish years ago. So I'm really at a loss at this point. If trying to get it fixed someplace is going to run me over $150 I may as well go buy a $400 compact or something to get me through until I have the money for a better one.

I have an external hard drive with most of my software on it. My free auto backup that came on it though ran out about 3 months ago and with fall semester going on it would really be nice to get back my last 2 months of work, notes, some working ahead I did with my C# programming class, etc.

-HP Pavilion dv5000
-Windows XP Media Version
-Had a virus problem occur about 3 days before this happend but my AVG said it took care of it, so I didn't think i... Read more

A:Windows Update gave me BSOD

You should have made your own recovery DVDs when you got the computer.

You might still be able to make them with this Procedure ...

You might still be able to order the recovery DVDs .. see Here

If you can remove the Hard Drive .. you should be able to connect it to this Adapter ..
Then you will be able to read the Data it contains from another computer.
 

2 more replies
Answer Match 65.94%

Hi there
Can you help me. I have pentium 4 computer and windows xp. I have only had this computer a few months it was brand new. It keeps crashing and coming up with this stop error. The screen goes blue and I have to reboot to get it going again.
Microsoft error reply says it is caused by an unknown device driver. It happens at least 3 or 4 times a week.
Do you know how I can fix it?
Thankyou
 

A:blue screen stop error windows xp

7 more replies
Answer Match 65.94%

My friend's netbook had the same blue screen error twice in one day. I borrowed it for a few days to see if I could get some help helping her. I posted on several other tech forums and have received a few suggestions. I tried their suggestions, but I'm not sure whether or not the issue has been resolved. I have not had any more blue screens. I just wanted to make sure everything was okay with it before I gave it back to her. I thought someone here might be able to look over the problem and make sure that it has been resolved.

Here is my original message:
Her netbook sometimes has a message that pops up that says that the computer recovered from an error, which it said was 10000007e Bccode. Problem Event Name Blue Screen. I looked up how to turn off automatic restarts so that it would show a blue screen the next time it happened.
The computer couldn't restart, which happened before. It had to try to fix the problem and use system restore. After it did that, it was fine until the blue screen came up again.
The computer turned off and on fine a couple times, and then the blue screen appeared when I turned on the computer.
Again, the computer said it couldn't start and needed to fix problems. It had to use system restore again to get it to start.
This is the blue screen error that I get:
Stop: 0x0000007E (0xc0000005, 0x86c6688E, 0x87A97B4C, 0x87A97730)
ndis.sys - address 86c6688E base at 860B000, datestamp 561c7b66
dumping physical memory to ... Read more

More replies
Answer Match 65.94%

Hai there... this is my 1st time posting thread. Hope you all can help me with my pc problm. this morning i turn on my pc and after the booting process my pc stuck at the blue screen with the windows icon. i tried to reboot it back but cannot.

so i boot it back by pushing the power button. everytime i turn it on again, it will stop at the same blue screen with windows icon.

i really need help with this.. there is a lot of important file on my HDD and i cannot afford to reformat it.

help needed... Thanks

A:Will stop at the same blue screen with windows icon

Can you get into Safe Mode.How to start Windows in Safe Mode

3 more replies
Answer Match 65.94%

My friend's netbook had the same blue screen error twice in one day.  I borrowed it for a few days to see if I could get some help helping her.  I posted on several other tech forums and have received a few suggestions.  I tried their suggestions, but I'm not sure whether or not the issue has been resolved.   I have not had any more blue screens.  I just wanted to make sure everything was okay with it before I gave it back to her.  I thought someone here might be able to look over the problem and make sure that it has been resolved.
 
Here is my original message:
Her netbook sometimes has a message that pops up that says that the computer recovered from an error, which it said was 10000007e Bccode. Problem Event Name Blue Screen. I looked up how to turn off automatic restarts so that it would show a blue screen the next time it happened.
The computer couldn't restart, which happened before. It had to try to fix the problem and use system restore. After it did that, it was fine until the blue screen came up again.
The computer turned off and on fine a couple times, and then the blue screen appeared when I turned on the computer.
Again, the computer said it couldn't start and needed to fix problems. It had to use system restore again to get it to start.

This is the blue screen error that I get:
Stop: 0x0000007E (0xc0000005, 0x86c6688E, 0x87A97B4C, 0x87A97730)
ndis.sys - address 86c6688E base at 860B000, datestamp 561c7b66
dumping physica... Read more

More replies
Answer Match 65.94%

I am not a techie and I only use my laptop to check email and do lesson plans for school. My computer has a blue screen upon start up with these:

STOP: 0x00000024 (0x00190203, 0X8233BEF0, 0xC0000102, 0x00000000)

There is also this message:

"Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer."

Duhhhh, my computer won't go past the blue screen...how am I supposed to do all that with a blue screen???

HELP! It's out of warranty too. Dell Inspriron 9300. I'm using a work computer to type this post.

A:Blue Stop Screen on Windows XP start up

Hello marfa1955

Configure your PC to boot from CD if it isn't already set up that way. You may need to enter the BIOS to configure the PC to boot from the CD.
Set the boot order to
floppy (if present)
CDROM
Hard disk
SAVE and EXIT

Start your PC with the XP Setup CD in the drive. When you see the "Press any key to boot from CD..." prompt, do so and let the CD-based boot process begin.

When the Recovery Console option is offered (Press R to start the Recovery Console), do so. You may be asked which Windows installation to enter, in which case type the number of the Windows installation you wish to work on (usually 1).

When prompted, enter the Administrator's password for that Windows installation. If you did not set a password just press ENTER

At the command prompt, type
chkdsk /r (there is a space before /)
Enter

.

3 more replies
Answer Match 65.94%

Hey there, I have spent the last couple of days trying to figure out how to fix my comp, i have googled a million times, even searched these forums, burnt boot CDs but unfortunately i have not come to any successes.

Long story short, I was on msn and then it said i signed in somewhere else, i signed back in, it repeated, friend said i spammed him with websites, anyways, i closed msn, the computer completely froze, alt+ctrl+del did not work so I held down the power button until it turned off. I restarted the comp to the one screen no one wants to see and it quickly restarted itself, went to the blue screen, rinse and repeat =P

I have gathered so far that my ntfs.sys file is corrupt and that i need to run chkdsk.
BUT
I can't get into windows and I can not find my windows cd anywhere... Other people have had this issue resolved by using the recovery CD but i can't find mine and don't know of anyone who has a XP Professional cd.

If anyone has any suggestions, please, it would be appreciated.

If there is a way to fix the file by using some sort of boot disk that would be awesome.

I am a bit opposed to formatting as I don't have a windows xp disk to re-install and I do not want to lose all of my music+games+photoshop files+movies etc.

If there is a way to get all of the stuff I want onto a disk or usb or even the secondary hard drive, then that would be great.

Hope to see replies soon =]

-Ben
 

A:Windows XP Blue Screen STOP 0x00000024

Still haven't found a solution without a disc, anyone?
 

3 more replies
Answer Match 65.94%

I have a friend whose netbook is having an issue. I'm at her house now, but I will be going home soon. I will be back over to help her tomorrow. Her netbook sometimes has a message that pops up that says that the computer recovered from an error, which it said was 10000007e Bccode. Problem Event Name Blue Screen. I looked up how to turn off automatic restarts so that it would show a blue screen the next time it happened.The computer couldn't restart, which happened before. It had to try to fix the problem and use system restore. After it did that, it was fine until the blue screen came up again.The computer turned off and on fine a couple times, and then the blue screen appeared when I turned on the computer.Again, the computer said it couldn't start and needed to fix problems. It had to use system restore again to get it to start.This is the blue screen error that I get:Stop: 0x0000007E (0xc0000005, 0x86c6688E, 0x87A97B4C, 0x87A97730)ndis.sys - address 86c6688E base at 860B000, datestamp 561c7b66dumping physical memory to disk: 100Her netbook is:Manufacturer: AcerModel: AOD270If someone could please help, I would really appreciate it. Thank you.

A:Blue Screen Stop 0x0000007E in Windows 7

Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLEDException 0xc0000005: STATUS_ACCESS_VIOLATIONOffending module ndis.sys: Network stackSuggestions: Update all network drivers, update / disable any security software / firewalls, run SFC /SCANNOW from an elevated Command Prompt. How To Ask Questions The Smart Way

8 more replies
Answer Match 65.94%

I have been getting this message, randomly, from Windows saying that there is something wrong with one of my drivers. I"ve been seeking help for a long time with this problem, trying to fix it myself. Here is what the problem reported:

The website it lead me to was:

http://wer.microsoft.com/responses/....1.0?SGD=6f3df3ea-eb4b-4555-aace-958337a18730

Here the files it told me were messed up:

C:\DOCUME~1\Mommy\LOCALS~1\Temp\WERa649.dir00\Mini021607-01.dmp
C:\DOCUME~1\Mommy\LOCALS~1\Temp\WERa649.dir00\sysdata.xml
 

A:grr...windows blue screen (stop message)

13 more replies
Answer Match 65.94%

I have a friend whose netbook is having an issue. I'm at her house now, but I will be going home soon. I will be back over to help her tomorrow. Her netbook sometimes has a message that pops up that says that the computer recovered from an error, which it said was 10000007e Bccode. Problem Event Name Blue Screen. I looked up how to turn off automatic restarts so that it would show a blue screen the next time it happened.

The computer couldn't restart, which happened before. It had to try to fix the problem and use system restore. After it did that, it was fine until the blue screen came up again.

The computer turned off and on fine a couple times, and then the blue screen appeared when I turned on the computer.

Again, the computer said it couldn't start and needed to fix problems. It had to use system restore again to get it to start.
This is the blue screen error that I get:

Stop: 0x0000007E (0xc0000005, 0x86c6688E, 0x87A97B4C, 0x87A97730)

ndis.sys - address 86c6688E base at 860B000, datestamp 561c7b66

dumping physical memory to disk: 100

Her netbook is:
Manufacturer: Acer
Model: AOD270

If someone could please help, I would really appreciate it. Thank you.
 

A:Blue Screen Stop 0x0000007E in Windows 7

12 more replies
Answer Match 65.94%

Hi!

I'm having problem with windows rebooting randomly. This is the error message in the blue screen apearing:

IRQL_NOT_LESS_OR_EQUAL

BCCode : 1000000a
BCP1 : F78AB2D0
BCP2 : 00000002
BCP3 : 00000001
BCP4 : 804D9B68
OSVer : 5_1_2600
SP : 2_0
Product : 256_1


Do you have any idea of how to solve this? it's quite a pain in the..

All tips are warmly welcome!

Thanks
Niclas
 

A:Blue screen Windows Stop Error

All the crashes are caused by your Intel PRO/Wireless LAN Driver. See if there's an update available.

BugCheck 1000000A, {f78ab2d0, 2, 1, 804d9b68}
Probably caused by : w70n51.sys ( w70n51+2a3ae )
Image name: w70n51.sys Timestamp: Mon Oct 13 21:11:51 2003 (3F8AA497)
 

4 more replies
Answer Match 65.94%

My computer is constantly restarting by itself. When this happens a blue screen appears saying a "stop error" has occurred. When I send the error report, Microsoft tells me it is because of software was not installed properly. The thing is I have not installed any new software lately.
Any suggestions will help- Thanks

Also, when the blue screen pops up it says:

A problem has been detected and windows has been shut down to prevent damage to your computer.

DRIVER_IRQL_NOT_LESS_OR_EQUAL
 

A:Windows XP “stop error” blue screen

7 more replies
Answer Match 65.1%

This morning I downloaded/installed Win 8's latest Updates. Behold, I now have the much needed START icon.

When I start-up now the desktop is displayed instead of the START . Which is Great. It's now the way I like it.
However, it also opens my USER window on the desktop.

I would like to remove the opening of my USER folder on start-up. Any suggestions?

Regards,

A:New Windows 8 UpDate gave me the START icon . . However

You must have done something else. No Start button for me unless I install one, like Win8StartButton (Classic Shell).

2 more replies
Answer Match 65.1%

Every time I look at a video windows freezes after about 1 min. When I turn the computer off and back on I get the blue stop screen.

A:Windows xp Freezes then blue stop screen at boot up

Post the BSOD error message that you are getting.

2 more replies
Answer Match 65.1%

Cannot start computer --> get blue screen ***STOP: 0X0000007B (0X8207AA10,0XC0000032,0X00000000,0X0000000) INACCESSIBLE_BOOT_DEVICE

I've tried all the F8 options without success. I cannot get started to check anything, I'm just stuck with nowhere to go. I've just relocated the Dell Dimension 4100 from work to home. It started up fine last night but when I moved it into it 's final location, I'm getting the BLUE SCREEN at the Windows start-up. The message says to check for viruses, remove any newly installed hard drive or hard drive controllers, check for hard drive corruption and that it is properly configured. How do I check if I can't boot? I've added or altered nothing except moving it to a different location and I don't have the original start-up disk since I aquired it from work as a "give-away".

Any suggestions?
 

A:Windows 2000 blue screen STOP 0X0000007B

Sounds like something's come loose. If you've never been into a tower before make sure you discharge any static or it'll fry the motherboard. Make sure everything's turned off and check cables etc and phericals in slots.

If all else fails the f key to press is F11 which will give you options to reset to factory settings.
 

3 more replies
Answer Match 65.1%

whenever i play world of warcraft within 20mins or so i get a blue screen stop message. 0x000000BE
and A00E5FAC at A000000
 

A:windows 2000 stop message(blue screen)

Memory addresses. Try reseating your memory and possibly add more RAM.
 

1 more replies
Answer Match 65.1%

I've got a new PC yesterday, by accident I installed 32bit OS instead of 64bit. So I wanted to reinstall the system as I couldn't use more than half of my RAM, now I have to say I'm not too experienced in these things so I might have done something wrong that caused problems later on.

Anyway, now when I try to install the 64bit windows 7, after selecting a boot device it leads me to "windows is loading files screen", as soon as it finishes loading files it shows windows emblem for few seconds before I get bluescreen.

I can still run windows 7 32bit normally but I can not boot installation for win7 64bit. Both copies of windows are legit.

A:Blue screen when trying to reinstall windows (STOP: 0x0000007E)

Hello and welcome Slayzer mate what media are you using - have you got a 32bit installation disk / media and 64bit media??

If you have used the 32bit media by mistake then if you have all your data backed up personally I would have wiped the drive of the 32bit first (on another machine) then started from scratch with the 64bit media.

That blue screen message is after all inferring you do not have enough space on the drive - which begs the question how large is the drive?

2 more replies
Answer Match 65.1%

I recently have built a new PC using parts i ordered and parts from my old system which desperately needed to be replaced. After my new system was created it ran well for about a month. When i came to turn on my PC one day i was greeted by a blue screen telling me that my windows registry files became corrupt. I used Microsoft.com's fix using the setup disk and had my PC working again. About a week later i was surfing the net and soon every program i accessed started to become corrupt. Knowing i didn't wanna mess with any log Microsoft fix i simply formatted and reinstalled windows XP on my system. After this my system ran well for another week. I came home to a frozen computer and after desperately trying the ole' ctrl-alt-delete the system restarted and i got a notice telling me that the system had recovered from a serious error. After this i would start gaming on my PC again only for it to crash and restart itself after about 30 minutes of Everquest 2. I disabled the auto reboot so i could see the error and got a blue screen telling me something like this:

Windows as detected a problem and has stopped functioning to prevent further damage to your computer.(or something like that) This came complete with this package of stop errors: Stop 0x0000008E (0xC0000005, 0x80538160, 0xF2E5F5C, 0X00000000)

After dealing with this error for about a week and wishing my computer would self destruct I once again got a message about corrupt data in Windows. I ran the chkd... Read more

A:Windows Blue Screen of Death Stop: 0x0000008E

It may be worth noting that the crashes occur most often when when playing games. Generally Everquest 2, however it has happened to me in Windows before, its just not as sudden.
 

3 more replies
Answer Match 65.1%

Ok, I'm a newbie to this sort of thing and not too good on all the technical stuff. I've seen other topics about this but nothing specific. This doesn't happen upon simply rebooting, it just happens after a certain amount of time of my computer being on (about 15-20 minutes). The last time it happened, I had a "system shutdown" window appear first and something along the lines of "hard disk error" or something similar. The strange thing is, this all happened after simply using software I recently installed (perfectly legit; bought from a store, the program was Pinnacle 14). So what info do I need to share and, quite simply, how do I fix this? Will a simple re-install of Windows XP fix it? Is my hard drive friend? Simply put, what is the problem and what do I do?

A:Blue screen of death (Windows XP) - STOP 0X000000F4

Uh, is a bump okay? I need help!

3 more replies
Answer Match 64.68%

Ciao,so this is what i deducted happened,i think
at 3 o'clock at night,my laptop updated while i slept like a baby,it updated and failed because it conflicted with my avira antivirus.it then deleted my avira,but since avira is one sturdy guy,it fought back and together they messed up my system(86x btw) now i can't open exe files,all my browsers give me the 0xc0000005 error.except ie,which simply doesn't work(not responding),so no access to the all powerful internet. few things that work are minesweeper and small games which don't require connection. so backgammon doesn't work but solitaire does. also ccleaner works,because people developing ccleaner are the only professionals and through 7 years of using it i've never been unhappy with it so let's all give the creators props for creating this awesomeness. now then microsoft developers don't know crap,i checked.

what i tried:
restarting....around 20 times
safe mode...no progress,same
safe mode with net...no progress,same
updating it...it does the same thing it did that accursed night
then one awesome guy who apparently knows microsoft better than microsoft itself,found a solution of deleting the updates while connection to internet is off and restarting it,apparently it worked for most people....except me,because destiny is so fair...what happened was that i deleted the updates but now they are still on the update list,if i try to delete the entries it tells me they are already uninstalled but the entries are there so... Read more

A:[SOLVED] the amazing update windows gave me,0xc0000005

Have you tried a System Restore? All Windows Updates create a restore point before installing.

8 more replies
Answer Match 64.26%

Laptop:
Dell Latitude D600 Intel(R) Pentium(R) M processor 1600MH 589MHz
512MB of Ram
Windows XP Pro ver. 2002 Service Pack 2
Fujitsu MHV2060AH Disk Drive
HL-DT-ST RW/DVD GCC-4241N DVD/CD-ROM drives

My Problem:

On startup gives me blue screen saying:

A problem has been detected and Windows has been shut down to prevent damage to your computer... stop: 0x000000tE (0xC0000005, 0x00000040, 0xEC4D0C7C, 0xEC4D0978)...

It just started back up normally after I was running a diagnostics test for blue screen. I quit the test early b/c it was taking too long and everything worked fine, I would just get an error report saying "windows recovered from a serious error" I sent in the error report a few times, but it keeps coming up... this is a work computer and I don't want it to start giving me the blue screen again when we really need to use it...thanks for any help!
 

A:Windows XP Pro Blue Screen: Stop Error 0x000000tE on Startup

Welcome to TS - just fashionably late. And perhaps you have already solve the problem. If not, then consider Crashes/Reboots in "Guides & Solved Issues".

The events logs sometimes hold clues to problems being experienced with the computer. New software and new hardware often introduce compatability problems that lead to the feared BSOD.

If the general troubleshooting does not lead to a solution, then minidumps associated with the errorcodes displayed as BSOD can be considered. Several contributors still have the knack to decode the minidumps.
 

2 more replies
Answer Match 64.26%

hey everyone, i'm looking around for help with this issue that just started yesterday. hope someone can help. thanks in advance.

so like i said this started out yesterday. my pc was idle, i was playing my 360 then it made a funny noise so i checked it out and i got a blue screen stop error and said this:

STOP: 0x0000008E (0xC0000005, 0x6D031321, 0xF7C4A3B8, 0x00000000)


ok, so i reboot it thinking it wasn't a big deal. then right after the xp loading screen, i get the same stop error screen.

so i reboot again, press f8 and boot it with 'last known good config'. after that, all last night everything was fine.

so i boot it up today and maybe a minute after my desktop loads, bam, another blue screen error, this time it was different:

STOP: 0x0000008E (0xC0000005, 0x30BEC321 ~~ the rest i didn't bother writing down, cause i already knew it was different.

i think to myself oh great now i just have to boot it up with 'last known good config' ....... yeah right. same thing, a minute after desktop loads i get the same error.

ok so i do some quick searching and download/buy regcure. i do a full scan and it cleans/fixes like 1200+ problems. supposedly this program fixes all stop errors... at least id hope so.

so i boot it up normally, and 1 minute in guess what happens. except this time it was different again.

STOP: 0x0000008E (0xC0000005, 0x31038321 ~~ so on and so forth.

so after all that, here i am in safe mode trying to figure out whats wrong. an... Read more

A:Can't boot windows normally; Stop blue screen error every time

Is XP updated? Also try the methods here:

http://support.microsoft.com/kb/945658/

3 more replies
Answer Match 64.26%

Past week my pc has decided it wants to break. Problem started where at the windows loading screen it would get stuck, after a few restarts i loaded the pc up in safe mode and edited the boot config to disable the windows graphic to see what was going on when windows was loading up. Not one driver was being loaded up in normal mode, whereas in safe mode all the basic drivers were being started. I guessed it was a problem with my boot config but it was fine and so ive chosen to reinstall windows.

Whenever i boot up from my windows xp mce cds i can get past the eula and to the screen to choose options for install/quit etc. but whenever i press any key i get the error:
STOP 0x0000008e





From microsoft said:



CAUSE

This behavior may occur if one of the following conditions is true: ?One or more of the random access memory (RAM) modules that are installed on your computer are faulty.?The RAM configuration is incompatible with Windows XP.
RESOLUTION

To troubleshoot this behavior, follow these steps: 1.Remove some of the memory modules that are installed on the computer. Leave at least the RAM that is required for the computer to start and run Windows XP.

The recommended RAM to run Windows XP is 128 megabytes (MB). The minimum is 64 MB, and the maximum is 4 gigabytes.

For example, if two 256-MB memory modules are installed on your computer, remove one of the memory modules.2.Restart your computer, and then run the Setup program:a. Inser... Read more

A:Blue screen of death (STOP 0x0000008e) on windows xp mce reinstall

This may help you http://support.microsoft.com/default.aspx?scid=kb;en-us;Q314057
 

2 more replies
Answer Match 64.26%

After Windows complete the installation, the laptop restart and the blue screen error appear: A problem has been detected and Windows has been shut down to prevent damage to your computer.*** STOP: 0x0000007E (0xc0000005 , 0x81DAA94A , 0x856F8BE8 , 0x856F87C0) Anyone can help me to solve this error please ?

More replies
Answer Match 64.26%

Hi,

Recently, Windows XP SP3 has been giving me BSODs. I am able to run Windows in Safe Mode, but I cannot run it normally.

Here are the results from SysInfo:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.40GHz, x86 Family 15 Model 3 Stepping 4
Processor Count: 2
RAM: 3071 Mb
Graphics Card: MSI MS-StarForce GeForce 6600 (NVIDIA GeForce 6600), 1 Mb
Hard Drives: C: Total - 204797 MB, Free - 129079 MB; E: Total - 512001 MB, Free - 112367 MB;
Motherboard: ASUSTeK Computer INC., P5GD2-Premium
Antivirus: Microsoft Security Essentials, Updated: Yes, On-Demand Scanner: Enabled

Here is the BSOD message:

A problem has been detected and Windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.

Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical Information:

*** STOP: 0x0000007E (0xC0000005,0xB9865174,0xF78DDD... Read more

A:Solved: Blue Screen of Death - Windows XP SP3 - STOP: 0x0000007E

bump
 

1 more replies
Answer Match 64.26%

The update is called:
nvidia - Graphics adapter WDDM1.1, Graphics Adapter WDDM1.2, Other hardware - NVIDIA GeForce GT 425M.
After installing it, whenever my laptop tries to use the Nvidia card, I get a blue screen and the system restarts.
I looked in installed updates to uninstall it, and it is not there.
I did a system restore to four days before I installed it, and I still get the same effect. Lastly, I installed some older nvidia drivers that used to work using the clean install option, and I still have this problem.

A:Optional update in windows update is giving me a blue screen.

It looks as though the update changed something in nvlddmkm.sys, and for some reason, it wasn't changed back when I did the system restore. I have no idea how to go about fixing it.

1 more replies
Answer Match 63.84%

Windows XP HP laptp will not load.  It gets to the Windows screen and then it blue screen flashes and then back to the option screen of normal startup,safe mode options,last known configuration.  None of the optons will load.
 
 
I have tried an XP cd rom and when it gets to the set up is starting windows process and it blue screens with the following stop error code 0x0000007B (0xF78D2524, 0x00000034, 0x00000000,0x00000000)
 
Any suggestions?
 
 

A:Windows XP won't boot. Blue screen stop error 0xoooooo7B (0xF78D2524)

What specific model HP laptop, please?
 
What led up to your attempt to try to reinstall?
 
Where did the XP CD come from?  HP doesn't issue such with their systems.
 
Louis

12 more replies
Answer Match 63.84%

Toshiba Laptop
My buddy just came over and has his Toshiba Laptop and it is having a blue screen stop error. Wanna see if we can get some help.

He has windows 2000
you turn it on and it goes through every thing and then you put your password in and get to the desk top and all that is ok, when you click to get on the internet it would flash a blue screen and then shutdown. I went into system and advanced and unchecked auto reboot so now it doesn't shut down but you get the blue screen and you can't go anywhere when it comes up can't press escape or control alt delete it just is there here is what it says

Stop: 0x0000001E <0xC0000005,0x00000000, 0x00000000>
KMODE_EXCEPTION_NOT_HANDLED

Then it says Beginning dump of physical mamory, phyical memory dump complete. Contact your system administrator or technical supoort group.

Can someone help with this error?
 

A:Toshiba Laptop-Windows 2000 blue screen stop error--help

Hello,

No module indicated? Check the Event Viewer (Start => Run => eventvwr.msc)

Usually a hardware (newly installed?) or RAM problem. This from Microsoft:

Resolving the Problem

Hardware incompatibility. First, make sure that any new hardware installed is listed on the Windows 2000 Hardware Compatibility List (HCL). For more information about the HCL, see "Additional Resources" at the end of this chapter.

Buggy device driver or system service. In addition, a buggy device driver or system service might be responsible for this error. Hardware issues, such as memory conflicts and interrupt request (IRQ) conflicts, can also generate this error.

If a driver is listed by name within the Stop message, disable or remove that driver. Disable or remove any drivers or services that were recently added. If the error occurs during the startup sequence, restart the computer using Safe Mode to rename or delete the file. If the driver is used as part of the system startup process in Safe Mode, you need to start the computer by using the Recovery Console to access the file. For more information about Safe Mode and the Recovery Console, see "Troubleshooting Tools and Strategies" in this book.

If the problem is associated with Win32k.sys, the source of the error might be a third-party remote control program. If such software is installed, the service can be removed by starting the system using the Recovery Console and disabling the offending system service.

Ch... Read more

2 more replies
Answer Match 63.84%

I have a dell laptop which came with winxp installed so i think that's called OEM install. I am getting a blue screen that says "STOP: c0000218 {Registry File Failure}" and a bunch of other stuff about system32 etc. I read MS website on how to recover but it also gives warning saying not to do if OEM. I also read elsewhere that this issue is related to corrupt hard drive but could not find anything that states how to diagnose if HDD issue. Currently booted up and am running diagnostics extended test that comes with laptop. No idea how I got here but its doing the testing.

I need to recover files from this hdd and after which i don't mind reinstalling but need help in confirming if HDD is bad (How to do it?) and how to recover the files needed? I have Dell CD that came with laptop and if i put it in and get to recovery console it asks for administrator password. what do i do from there and once if i get to the command prompt what else can be done from there. Pls help.
 

A:Blue Screen Windows XP - STOP: c0000218 {Registry File Failure}

8 more replies
Answer Match 63.84%

Hi all,

Hopefully I have posted in the right area.
My laptop which is around 6/7 years old now (it's an Acer Aspire 5532) - with Windows 7, recently updated in the background.
On screen pop up was displayed stating a restart was needed.
I selected the restart now option but since then my laptop has not started properly at all.
The boot will begin and I will then be displayed the following blue screen:
STOP: c000007b {bad image}
Exception Processing Message c000007b Parameters d33f0 0 0

I do see slightly different errors on the blue screen (different error codes after the c000007b one) at the times but the laptop never boots successfully.
I have followed the Windows startup repair tool which unfortunately didn't resolve the issue.

I am able to boot in safe made, where I tried to uninstall the recent update but this did not resolve the issue.
Also, System Restore on my laptop seems to be disabled so I am not able to restore to an earlier point.

Some laptop details (if it helps):
AMD Athlon 64 X2 Dual-Core Processor TK-42 1.60GHz
4GB RAM
220GB HD (59.3GB free)
Win 7 - Service pack 1

Is there anything I can do to get my laptop back to working order without reinstalling Windows entirely?

Thanks in advance for any help.
 

A:Windows 7 doesn't load - STOP: c000007b blue screen is displayed

If you can get to your BIOS check to see if your hard drive is listed. if not then more than likely its failed and will have to be replaced. thats the first thing i thought of since what you have tried so far hasnt worked.the fact that the computer is about 7 years old the hard drive might be the culprit.
 

6 more replies
Answer Match 63.84%

Guys,

I am trying to work through using the recovery module to fix this issue.

I have located my driver disck and gotten to the recovery module.

I selected the windows and then entered the administrative password just like I saw on other sites.

My problem is now I don't know what to do next.

One of the sites said to change directory to:
cd windows\system32\drivers

but the system can not find that directory.

The blue screen said that the image winiet.dd is possibly corrupt but I can not find this file.

I am sure it is just something simple but it had been 20 years since I have used DOS to navigate and I need a little hand holding on this one.

Thanks

Travis

A:Windows XP Blue Screen "Stop: c0000221 (Bad Image Checksum)

hi there.
try to help here.
if it missing or corrupted from ur computer, u must provide it by ur self.
the prompt will ask you to move around ur comp to delete or move or add files needed, in this case winiet.dd
try to locate the same file from other computer, save it into ur disk.
thats work if only those file corrupted.
try to do this
in prompt, type cd /
because, standart ops is, drive u are now is c:\documents and settings\username
in those directory, there is no system32
u must return to root folder, c:\
hope it work
if not, perhaps u want to consider repair windows using installer cd.

2 more replies
Answer Match 63.84%

Hi,
Just bought new computer and I'm loading new software etc. on it and setting it up.
After loading my Epson printer software & driver I started getting the Blue screen.
It happens once every 30 to 60 minutes.


Here is my crash info:
Problem signature:
  Problem Event Name: BlueScreen
  OS Version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

Additional information about the problem:
  BCCode: 124
  BCP1: 0000000000000000
  BCP2: FFFFFA801121C028
  BCP3: 00000000BB800000
  BCP4: 0000000000000174
  OS Version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

Files that help describe the problem:
  C:\Windows\Minidump\081016-22822-01.dmp
  C:\Users\Jeff\AppData\Local\Temp\WER-69186-0.sysdata.xml

Read our privacy statement online:
  http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
  C:\Windows\system32\en-US\erofflps.txt
I can upload the 3 DMP files if you need them. I don't see a way to do it on this message.
Thanks for your help.

More replies
Answer Match 63%

So I turn on my computer this morning and the BSOD pops up. Error code is:

***STOP: 0x00000024 (0x001902FE, 0xF78C63DC, 0xF78C60D8, 0x862A5805)

It says to disable any anti virus, disk defrag, or backup utilities, but I can't even get into Windows. Can't boot into safe mode or last known configuration either.

I reset the RAM and used both sticks on their own, same problem.

Any ideas how to fix this?

A:Blue screen of death on startup....cant boot into Windows (0x24 stop code)

Hi

0x24 stop error indicates a problem with the driver ntfs.sys that allows Windows to read from NTFS formatted drives.

If you have an XP CD, boot off the CD, enter the recovery console, and type in chkdsk /f.

4 more replies
Answer Match 63%

Every single time I turn on my computer I get a blue screen saying this:

A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this stop error screen restart your computer. If this screen appears again, follow these steps:

Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates Try changing video adapter.

Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical information:

*** STOP: 0x0000008E (0x00000005, 0x8980D88A, 0xA313B02B, 0x00000000)
Collecting data for crash dump ...
Initializing disk for crash dump ...
Physical memory dump complete.
Contact your system admin or technical support group for further assistance.
Someone please help me!
 

More replies
Answer Match 63%

I have an HP Pavilion that has suddenly refused to boot. I even tried to Reinstall windows but to no avail, I can't get far enough before the blue screen pops up saying "Stop c000021a (0xc0000001 0x0010034c)" Recovery won't even work. I've tried everything that I know how to do. Please help. Thanks.

A:Windows Vista will not boot, getting blue screen - Stop c000021a (0xc0000001 0x0010034c)

System model?

Did you try the HP support webpage for your model?

Louis

1 more replies
Answer Match 63%

hi all. i have dell inspiron 1545 , windows vista . i have a blue screen, STOP Error 0x0000007b ( windows recovery error ). a recent software or hardware change may cause . i am unable to reboot . even when i use dvd for re-installation, again same sceen is poping up, even i choose safe mode same blue screen is poping up. i do not have any option . i am unable to passthe system recovery error screen . please help if anyone has information
 

More replies
Answer Match 63%

Hi,
I recently bought 2 Toshiba Satellite Pro L300D-138 laptops; one for me and one for my parents. I have been setting both of them up. They both came with Vista, and as Toshiba instructs, I made recovery discs, and then I downgraded to XP.
It appeared to go smoothly enough, but then when I shut down either computer, they would automatically restart. The only way to shut either down completely is to hold my finger down on the power button. What I have taken to doing is allowing it to shut down, then as I hear the fans re-activate, I then hold down the button and it shuts down properly.
At first I thought this was a Toshiba problem, so I checked their website, and I rang them a couple of times. They talked me through a couple of different options, and in 'Toshiba Modem' in the Device Manager, I unchecked a box that said 'restart on standby' or something...
This didn't solve the problem. I rang again, we did other things (sorry for lack of information, but as I now believe it is a Windows problem, I don't really think anything they said or did for me was of much help.)
Anyway, both computers still restarted when I shut them down, so I googled it, and on a Microsoft forum came up with: Right click on My Computer, go into Properties; click on Start up and failure, uncheck box that says 'automatic restart'. I don't claim to know much about computers, but I imagine the point of that little system is that when something is going wrong, the comp... Read more

A:Computer restarts on shut down OR blue screen- 'stop windows has shut down to protect' screen

Hi .Ati2mtag.sys is a video driver, installed for any system possessing an ATI video card/chip.http://www.file.net/process/ati2mtag.sys.htmlHaving possessed various ATI cards previously...I can attest that yours is a fairly common situation. I suspect that the driver has been somehow damaged and needs to be replaced by an undamaged version.What I would do is, once the system boots, remove the installed video drivers (using Device Manager)...then reboot and reinstall the drivers.How to update a Windows hardware driver - http://www.bleepingcomputer.com/tutorials/how-to-update-a-windows-hardware-driver/ The STOP0X0000007A noted in the error message...indicates that this is a hardware error. Component drivers are considered hardware, so I would try the uninstall/reinstall for the video drivers.As for shutdown problems...every version of Windows has those. Some have solutions, others are more obtuse. You might take a look at Troubleshoot XP Shutdown Problems (MS) - http://support.microsoft.com/?kbid=308029 AND Troubleshooting Windows XP Shutdown Issues - http://www.theeldergeek.com/shutdown_issues_in_xp.htm If you read through the links provided, you will see that the suggestions made by Toshiba personnel...followed a known, logical sequence.Louis

4 more replies
Answer Match 61.32%

Hi.

I just downloaded the latest windows update KB969947 and the malicious software removal tool. After the download I clicked on the "restart system now" button. Not long after this the screen went blue with this message.

STOP: c000021a {fatal system error}
The windows system process terminated unexpectedally with a status of 0xc0000005 (0x7c911766 0x006af8ec)
The system has been shut down.

I restarted manually and everything seemed to run OK. I went back to MS updates and it seemed as though the updates had beeen successful. I have never had a problem with windows updates before and I was wondering if this might be a sign of a bigger problem.

XP sp3.

Thanks.

A:blue screen after windows update

http://www.aumha.org/a/stop.htmScroll down to 21A in right column.Louis

17 more replies
Answer Match 61.32%

After installing updates yesterday, my laptop automatically restarted and now I get the blue error screen whether trying to boot in safe mode or last good configuration or normal mode.

I ran Repair Windows from the cd but it said something like "this problem cannot be fixed by repair". Then tried doing system restore but I have just installed Vista and there are no restore points. This is the first windows update.

So I am at a loss as to what to do now. I do not want to reinstall. I have found articles saying that update "KB 973879" is the problem (http://www.techerator.com/2009/08/fix-windows-vista-64-bit-gets-blue-screen-after-windows-updates/). I have tried to uninstall KB 973879 from the System Recovery Command Prompt but I don't know what programs to use or where any needed files are located. I am comfortable with being in command line but don't know much about Vista's programs.

Anyone know what I can do to uninstall the bad update?
 

A:bad Windows Update, getting blue screen

8 more replies
Answer Match 61.32%

I've had my Dell Inspiron notebook since about Feb. of this year. Everytime my window vista updates itself my computer crashes and has to go to a restore point. Is there anyway I can correct this without having to delete everything and starting over?

Step by step what happens:

1) Windows will update
2) I will restart the computer
3) The windows will begin the booting process
4) The computer then switches to a dark blue screen, the crash dumping screen
Any help here would be greatly appreciated.

-John

More replies
Answer Match 60.9%

I'm having an issue with one of my computers which started with just a Blue Screen of Death out of nowhere.

The stop code I got was 0x0000008E, which I googled and ended up reading that it has something to do with Memory. I ran MemTest86, which brought back no errors. I also ran a diagnostic on my Hard Drive, which also brought back nothing.

I then started seeing it crashing during Windows Update. I haven't taken a close enough look at which specific updates are being installed as I haven't looked at the computer since Sunday, but I was wondering if it definitely is a memory issue and one of my RAM sticks need to be replaced.

More replies
Answer Match 60.9%

Hi,

I have followed the instructions and have attachjed zip file.

What do I do now?

More replies
Answer Match 60.9%

My windows 8.1 downloaded some automatic updates, and while installing, froze at 64%. (going on two hours). I tried turning off and turning on the wifi, as someone suggested. nothing. Any suggestions? This is a Dell Inspiron.

More replies
Answer Match 60.9%

Hello, I do believe that this computer hasnt been updated for quite some time as this is still running XP SP2. The first thing I tried to do was update with Windows update but it stalls into blue screen after several minutes. I have run just about every scan i can on this machine and still cannot get it to respond back to normal. Zone alarm found the "not-a-virus" problem and deleted both instances. When I try and run Malwarebytes it stalls on file netapi32.dll every time whether in safe mode or not. This machine is pretty slow(I went through the processes) in the pre-read file on this site and to no avail. I notice every start the task bar comes up blue as it is supposed to but then turns the cream color. Here is the DDS log below. Any ideas? The other issue at bootup I get a generic host error with either netcfgx or netcfg error (not sure if this is due to the fact that the owners use DSL and my connection is Cable). Any ideas?DDS (Ver_09-06-26.01) - NTFSx86 Run by Lisa at 14:42:24.35 on Wed 07/22/2009Internet Explorer: 7.0.5730.11============== Pseudo HJT Report ===============uStart Page = hxxp://att.yahoo.comuSearchMigratedDefaultURL = hxxp://search.yahoo.com/search?p={searchTerms}&ei=utf-8&fr=b1ie7BHO: Yahoo! Toolbar Helper: {02478d38-c3f9-4efb-9b51-7695eca05670} - c:program filesyahoo!companioninstallscpn1yt.dllBHO: Adobe PDF Reader Link Helper: {06849e9f-c8d7-4d59-b87d-784b7d6be0b3} - c:program filescommon filesadobeacrobatact... Read more

A:Windows Update freezes to blue screen

Hello and welcome to Bleeping Computer.My name is Syler, I will be helping you to solve your Malware issues. Whilst I am helping you, I wouldbe grateful if you would note the following: Please do not run other tools or scans unless I ask you to and follow all the steps I give you, in order.
Copy and paste all logs requested in you reply, Do not attach them unless asked too.
If you don't know or understand something, please don't hesitate to say or ask before you proceed with my instructions.
Please continue to work with me, until I tell you your machine appears to be clean. Absence of symptoms does not mean that everything is clear.
If I do not hear back from you within 5 days of my last post, then this topic will be closed.Please download Malwarebytes' Anti-Malware from HereNote: If you already have Malwarebytes' Anti-Malware, just update then run it.Double Click mbam-setup.exe to install the application.Make sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.If an update is found, it will download and install the latest version.Once the program has loaded, select "Perform Full Scan", then click Scan (the scan may take some time to finish, so please be patient).When the scan is complete, click OK, then Show Results to view the results.Make sure that everything is checked, and click Remove Selected.When disinfection is completed, a log will open in Notepad and you may be p... Read more

2 more replies
Answer Match 60.9%

G'day
 
I've just spent that last few days re-installing Windows 7 Pro x64 onto a new SSD. All my drivers are installed and up to date with no yellow exclamation marks and all the Win updates installed successfully. I have been re-installing all my software and games etc without any problems or errors. Today Windows Update found 13 more updates containing security and system updates for Win x64, Framework 4, 3.5.1, and a definitions for Office-14. After installing this and clicking on the restart windows button I saw the 'applying updates counter' then experienced a blue screen.
After rebooting I chose start Windows normally and windows update reports that the updates installed successfully but I'm now wondering whether I need to start over and re-install everything all over again or perhaps I'll get away with simply ignoring it. It did produce an error log but I need somebody whom understands it to diagnose what the cause was.
 
Thank You
 
Mike JP

A:Blue screen during a windows update reboot

This is the error that occurred at the time of BSOD and a critical event logged 6 seconds prior to crashing taken from Win Event Viewer.
 
 
Log Name:      System
Source:        Microsoft-Windows-WER-SystemErrorReporting
Date:          15/5/2013 5:12:41 PM
Event ID:      1001
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      MIKEJNR-PC
Description:
The computer has rebooted from a bugcheck.  The bugcheck was: 0x000000f4 (0x0000000000000003, 0xfffffa800c39e650, 0xfffffa800c39e930, 0xfffff800031d9350). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 051513-11824-01.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
    <EventID Qualifiers="16384">1001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-05-15T09:12:41.000000000Z" />
    <EventRecordID>12395</... Read more

4 more replies
Answer Match 60.06%

Good Morning!
I have a Dell Demension 4700 which was working fine and just recently starting having a blue screen of death pop-up, then I realized it only occurred when I was running Windows Update. It trys to install IE7 along with a bunch of other hotfixes and it goes to the blue screen with the following codes.

0X0000008E (0XC0000005, 0XEE940928, 0XECBFAA28, 0X00000000)


Can anyone assist me if figuring this problem out??
Thank You!!
jarretche

A:Blue Screen of Death when running Windows Update

Does the BSOD only come from running Windows Update, or does it occur (every time) on boot ?

Did anything else (besides running Update) "change" prior to the problem (new hardware/software, etc...) ?

17 more replies
Answer Match 60.06%

UGH, this is a brand new 1 week old Acer laptop.

This morning it tells me it has recovered from a serious error, but after about 5 minutes of seemingly normal usage, it briefly flashed some kind of blue screen error (no way in hell I could read it)..

Now it is constantly asking for a chkdsk, I let it run and all appears OK... but when I get to the login screen the display starts to look weird like there are lines running through it, and it promptly flashes the same blue screeen and starts all over again.

I have been able to briefly get into safe mode, tried a system restore but when I went to reboot the processes started all over again. PLEASE NOTE that getting into safe mode takes some patience.... it hangs FOREVER when loading the agpCPQ.sys driver, and sometimes just goes ahead and reboots on it's own.. TWICE so far today I have managed to get into safe mode, but only for a few minutes before it reboots and starts over.

Um.. what else.. OH I ran a windows update last night, how ironic!!! I am right now trying to get into safe mode to see if I can unistall it.

I have NO WINDOWS XP DISK (I am running XP Pro) but I do have an acer recovery disk... but of course I do not want to run it unless I ABSOLUTELY HAVE TO.

The laptop is not overheating... um..... I disabled my video drivers before a reboot (one of the few times I was able to get into safe mode).

I cannot think of anything else.. other than the fact that I am on my old desktop, I do NOT have a floppy drive o... Read more

A:Blue Screen, hangs at agpcpq.sys, ever since windows update (XP Pro)

16 more replies
Answer Match 60.06%

In short,I need some serious help because this is how the forced update to windows 10 starts.
My updates are set to Off but it updates anyway. I feel like i'm being straight hacked by microsoft.
After it updates,Anytime i turn my computer back on it finished whatever update it downloaded behind
my back. Now it's at a point where if i try to kill the "Windows Update Module" through task manager. I
get a Blue screen of death "IRQL not less or equal". This only happens when i kill the windows update
Module in task manager. I often kill this process for 2 core reasons.

1.It's not supposed to be updating anything,Especially since i have the updates set to off.
2.It takes up way too much CPU and Disk which causes this laptop to run even worse then what
it already does.

I say it runs worse because the CPU and Disk are already high because of McAfee alone. This just dog-piles
the crappy performance which irritates me to no end because at this point when all this is going on i can't even
play basic games like Sims 2 without serious lag issues. There is no winning. i guess eventually my laptop
will just eventually shut off and update to windows 10 then?

More replies
Answer Match 60.06%

I should know better, but of course I know a bit and thought I could help.... my neice had the standard popup/slow system/hijacks of iexplorer to the point where her win xp pro system was nearly unusable. Nothing was up to date, so I ran norton 2004 in safe mode (with outdated updates) and spybot 1.3 (again, could not download latest updates) to get a few things off; then got to the point where I could at least get out to the internet. Updated everything, added mozilla, began using windows update which started with a 37 part security update (part of service pack 1?) since nothing had been kept up to date. Then I had to go there, I used hijackthis beginning with this log:Logfile of HijackThis v1.99.1Scan saved at 11:16:45 AM, on 12/26/2005Platform: Windows XP SP1 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\Explorer.EXEC:\Program Files\AIM\aim.exeC:\Program Files\Common Files\AOL\1128646048\ee\AOLHostManager.exeC:\Program Files\Common Files\AOL\1128646048\ee\AOLServiceHost.exeC:\Program Files\Common Files\AOL\1128646048\ee\AOLServiceHost.exeC... Read more

A:Blue Screen After Hijackthis Removal And Windows Update

Posted a "blue screen" problem in win xp area; my question concerned this hijackthis log and some removals i did which i think led up to a big old blue screen on a windows reboot. posting the hijackthis log here so that you can tell me what can safely be removed; and if i removed something else (will get to the computer in question on friday) how to most easily get the entry back.... hopefully not asking this advice too late! Thanks - I am cured of any hijackthis manipulation without your clearance and admit to being in over my head.Logfile of HijackThis v1.99.1Scan saved at 11:16:45 AM, on 12/26/2005Platform: Windows XP SP1 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\Explorer.EXEC:\Program Files\AIM\aim.exeC:\Program Files\Common Files\AOL\1128646048\ee\AOLHostManager.exeC:\Program Files\Common Files\AOL\1128646048\ee\AOLServiceHost.exeC:\Program Files\Common Files\AOL\1128646048\ee\AOLServiceHost.exeC:\Program Files\Symantec AntiVirus\VPC32.exeC:\Program Files\Mozilla Firefox\firefox.exeC:\Do... Read more

6 more replies
Answer Match 60.06%

Hi,
I have just received a new Dell XPS 13 with Windows 10. I turned on BitLocker. After a while I got the message
Dell Update
1 update is ready to install
-Dell XPS 13 9350 System BIOS
I installed the BIOS update which went without problems. But when I rebooted I got the Dell Logo for a few seconds and then a blue screen. Nothing happens and after half a minute the computer shuts down.
HOW TO SOLVE THIS?
Then I returned to the previous Bios version. Now the computer boots again. pffff. But now I get the annoying Dell message everytime informing me that I should update the BIOS. I can disable the DELL Updater, but I actually would like to disable only this BIOS update message.
How should I do this?

Thanks,
Antoine

A:Windows 10 boots to blue screen after Bios update

I would try disabling the bitlocker then install the bios, then install the bitlocker.  I'm not 100 percent familiar with bitlocker but its possible it has something to integrate with the eufi/bios.

1 more replies
Answer Match 60.06%

Windows XP-
Blue screen reads-
"A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen,restart your computer. If this screen appears again, follow these steps:
Disable or uninstall any anti-virus, disk fragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer."
Technical information:
*** Stop:0x00000024 (0x00190203,0x8672F3C8, 0xC0000102, 0x00000000)


The problem is I can not type anything....I have restarted-but same msg after it gives me the choice to start in safe mode or other choices...such as Start windows normally, etc.

I would appreciate any help you can give me.....not very computer savy.
Thanks-jsl

A:Windows update occurred-caused blue screen-windows shutdown

run it from the recovery console
http://support.microsoft.com/kb/307654

7 more replies
Answer Match 59.64%

Hello, I have an HP Pavilion g series laptop (running win7) that is in a continuous restarting loop. This happened after the computer auto updated (windows update). I do not know what was updated, but now every time the laptop starts up it seems to be in a continuous rebooting loop after the windows logo then a blue flash. I am unable to go into safe mode or any other mode as I keep getting redirected to a page that gives me two options:Launch Startup Repair or Start Windows Normally. Startup repair gives me the same results as trying to run in safe mode.

By turning the auto-restart on system failure off i was able to read what the blue error message, which says:
-

A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is your first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check you hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive curruption, and then restart your computer.

Technical information:
***STOP: 0X0000007B (0xFFFFF880009A9928,0xFFFFFFFFC000000D,0x0000000000000000,0X00000000000000000)

-
Can someone give me advice on how to solve and prevent this problem? I am currently using a different laptop to access this forum.
kodex

A:Help with blue screen auto reboot, Stop: 0x0000007B error screen

Bug Check 0x7B: INACCESSIBLE_BOOT_DEVICE

The INACCESSIBLE_BOOT_DEVICE bug check has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.





Quote:
Cause

The INACCESSIBLE_BOOT_DEVICE bug check frequently occurs because of a boot device failure. During I/O system initialization, the boot device driver might have failed to initialize the boot device (typically a hard disk). File system initialization might have failed because it did not recognize the data on the boot device. Also, repartitioning the system partition or installing a new SCSI adapter or disk controller might induce this error.

This error can also occur because of incompatible disk hardware. If the error occurred at the initial setup of the system, the system might have been installed on an unsupported disk or SCSI controller. Some controllers are supported only by drivers that are in the Windows Driver Library (WDL). (These drivers require the user to do a custom installation.)


Further Reading...
Bug Check 0x7B: INACCESSIBLE_BOOT_DEVICE

1 more replies
Answer Match 59.64%

Windows 10 has been working perfectly on my machine but then in a recent update (last month), one of the big ones where the screen goes black with a percentage circle of the installation progress (the same one as when you upgrade from a previous version of Windows), after a while the screen goes a light blue colour (not the BSOD) with white lines in the middle of the screen.I presume it is a problem with the graphics driver so I have set the option to not update drivers automatically but the problem still occurs when the PC forces the update automatically.Has anyone else come across this issue?It is a work PC so I'm loathed to do a fresh install as that will take a morning out of my hectic work time. Then I have to use the F8 key and roll back to before the update, which then takes another hour or so out of my time. Why it can't just update in the background like the old days, I don't know. Any help would be appreciated. My frustration is seen in the photo below...

More replies
Answer Match 59.64%

What is this strange message on blue screen? Last week I heard someone mention it on a podcast - if not for that, I would have been sure my system had been hacked! Read on ...

Have Lenovo Thinkpad W550s that was upgraded to Win 10 Pro from Win 7 Pro a few months ago. Hadn't used my computer for a few days (it was probably in sleep mode). On Tuesday eve, 15 December 2015, try to start up and see blank screen; had to hold down power button and then reboot. Here's where it gets interesting ...
I get a blue screen (not BSOD) with a message in large letters (like 10 mm high) that says something to the affect of "Don't worry, your files are still safe". The blue screen background slowly cycles between dark and light. After more than 2 minutes the screen displays a new message, I don't recall what it was. And finally my computer boots into Windows.

Sorry, I am not at my computer now, so cannot tell you what version it is currently running or what the update history is.

So what happened?

A:Windows 10 Pro December update with strange message on blue screen

Hello and welcome to the tenforums!

You were updated to the latest Windows 10 Ver 1511

Hopefully everything will work as before but you will notice a few changes. You can see more details about this here:

First Major Update for Windows 10 Available

1 more replies
Answer Match 59.64%

Hi Team,

I am unable to update my windows 7 64bit home premium, due to the above error mentioned.
Went through the steps of help below, but I cannot find SQL Server VSS Writer program installed in my system, please let me know where to find this program to download and install it. Due to this update issue i'm seeing the blue screen crash of the OS. Please help me out how to resolve this issue.

Windows Update error 780

If you receive error 780 when you try to install Windows updates, Windows was unable to start the SQL Server VSS Writer service. To fix this problem, follow these steps.

Check the SQL Server VSS Writer service startup type
Click to open Administrative Tools.

Double-click Services. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.

Right-click SQL Server VSS Writer, and then click Properties.

On the General tab, make sure the Startup type is set to Automatic or Manual.

If the SQL Server VSS Writer Service Startup type is already set to Automatic or Manual, follow the steps in the next procedure.

Review the SQL Server summary log
Open the SQL Server summary log to determine which other services can't be started. The log is located at:

%programfile%\Microsoft SQL Server\90\Setup Bootstrap\Log\Hotfix

For every service listed in the log file that didn't start, follow the steps under "Check the SQL Server VSS Writer Service startup typ... Read more

A:Windows Update error 780 - leading to Blue Screen Crash

Windows Update Posting Instructions

4 more replies
Answer Match 59.64%

Hi

After installing the update and rebooting everything worked fine. But when I shut down the laptop and switched it on again, it came up with a blue screen with a Stop 0x50 in Win32k.sys. I could not even boot into safe mode as Windows failed to start no matter which mode chosen.

Any suggestions??

Thanks

iTeamSupport

A:Blue Screen after applying update to Windows 7 Home Premium 64

Hi iTeamSupport,

Is this computer a desktop or a laptop? Turn on the laptop once again and tap "F8" to bring up the safe mode menu once more. Then, instead of choosing safe mode, choose "Last Known Good Configurations". See if this get's your computer boot at least.

2 more replies
Answer Match 59.64%

My computer runs windows vista SP2 32 bit.
 
I was trying to get help on how to fix the problem of the 0x80096001 error that pops up when I try to update windows vista and microsoft security essentials here:
 
http://www.bleepingcomputer.com/forums/t/532226/is-there-a-virus-that-causes-windows-vista-error-code-0x80096001/
 
Someone told me to make a new thread here because I might need some experts on this.
 
Here is the situation here.
 
The scans, like Malwarebytes full scan, ESET scan, seatools short scan, all lead to the 0x000000F4 blue screen of death,  It is pretty much described in the link above.
 

 
A problem has been detected an windows has been shut down to prevent damage to your computer.
 
A process or thread crucial to system operation has unexpectedly exited or been terminated.
 
If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again, follow these steps:
 
Check to make sure any new hardware or software is properly installed.  If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.
 
If problems continue, disable or remove any newly installed hardware or software.  Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced startup Options, and then select Safe ... Read more

A:Can't update windows, blue screen during MBAM and ESET scans

Attach.txt log
 
 
.
UNLESS SPECIFICALLY INSTRUCTED, DO NOT POST THIS LOG.
IF REQUESTED, ZIP IT UP & ATTACH IT
.
DDS (Ver_2012-11-20.01)
.
Microsoft® Windows Vista™ Home Premium
Boot Device: \Device\HarddiskVolume2
Install Date: 4/7/2009 9:35:04 AM
System Uptime: 4/28/2014 2:38:28 AM (9 hours ago)
.
Motherboard: PEGATRON CORPORATION          |  | F50SV     
Processor: Pentium® Dual-Core CPU       T4200  @ 2.00GHz | CPU 1 | 2000/200mhz
.
==== Disk Partitions =========================
.
C: is FIXED (NTFS) - 116 GiB total, 49.892 GiB free.
D: is FIXED (NTFS) - 105 GiB total, 33.375 GiB free.
E: is CDROM ()
F: is CDROM ()
G: is CDROM ()
.
==== Disabled Device Manager Items =============
.
==== System Restore Points ===================
.
.
==== Installed Programs ======================
.
 Update for Microsoft Office 2007 (KB2508958)
2007 Microsoft Office system
Activation Assistant for the 2007 Microsoft Office suites
Adobe AIR
Adobe Flash Player 11 Plugin
Adobe Flash Player 9 ActiveX
Adobe Reader X (10.0.1)
Apple Application Support
Apple Software Update
ASUS CopyProtect
ASUS Data Security Manager
ASUS FancyStart
ASUS LifeFrame3
ASUS Live Update
ASUS MultiFrame
ASUS Power4Gear eXtreme
ASUS SmartLogon
ASUS Splendid Video Enhancement Technology
ASUS Touch Pad Extra
ASUS Virtual Camera
Asus_Camera_ScreenSaver
Atheros Client Installation Program
A... Read more

52 more replies
Answer Match 59.64%

My Laptop installed automatic updates for Windows 10 and then I clicked to restart it. I am now getting a blue screen error
Your PC ran into a problem and needs to restart error code: 0xc000021a
 
It then tries to carry out an Automatic Repair by restarting but then it just goes back to the original blue screen.
Microsoft advise after automatic repair to select Troubleshoot > Advanced options > System Restore but I received an error message saying it had failed.
I am now at a loss as to what to do and hoping somebody can help. 
Laptop is a Toshiba Satellite C50 running Windows 10.
Thank you.
 

More replies
Answer Match 59.22%

Toshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.

I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)

I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk
At boot, F12, chose CD/DVD, but still nothing,
I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation

For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.


That's about everything I could get.
Thanks.
 

A:Can't start XP: After XP loading screen, Blue Screen Stop error

9 more replies
Answer Match 59.22%

New to the thread.... not sure if i'm posting right, soo correct me if u want =)
Anyway.. yesterday I turned my computer on and got the screen "Sorry for the convenience blah blah blah... Start Windows Normally, Safe Mode...ect.
I chose Start Windows Normally, which did indeed start windows normally, but I wasn't sure what caused this problem in the first place, so i ignored it. I turned my computer off.

Later i turned my computer back on and was confronted by another screen, this time a Blue screen.. A Stop error, can't exactly remember the error, but said something about "memory dump'...
I eventually got avoided a problem with this screen and got into windows.. However this morning, when i turn the computer on, I was forced to use 'Last Known Good Configuration"

Whats going on? I did scans on Norton, Adaware & Spybot.

Please help!!

A:Blue Screen, Black Screen??? Stop Error Code?

Hi Kirstie, computers are great when they work huh? These stop errors and blue screens of death can have many causes. Sometimes they occur when a computer is getting older and some piece of hardware is going bad, like a memory stick for instance. Other times these errors occur after installing a new program or doing a windows update. They can be quite difficult to pin down sometimes as well. I would be glad to help you find the cause of the error if you will answer a few questions for me. By answering these questions I should be able to determine the cause and help you to correct it.

Here are some questions for you to answer that will help me. Just answer them the best you can and if you dont know an answer its ok. If you already answered anything I'm asking in your first post just skip over it.

1). What kind of computer do you have? Laptop? Desktop? Dell, HP, Ect?
2). Whats your level of experience? Novice, intermediate, expert, or dont know squat?
3). What operating system are you using? Xp Home or XP Pro?
4). What antivirus are you using? Are you using a firewall?
5) Please tell us a little about your computer. How old is your computer? What size Hard drive does it have?, processor, ram, Bios ver. Ect.
6). Do you have an Xp disk for this computer?
7). Does your computer have a floppy drive, CD drive, Ect.?
8). Do you have access to another working computer with an internet connection?
9). Did you noticed this problem occuring after installing anything recentl... Read more

9 more replies
Answer Match 58.8%

I have recently reformatted my computer, and I started updating windows. But suddenly after installing an update and restarting, windows started up in with a error message about lsass.exe failed to initialize (0xc0000005), and the after clicking the message nothing happend nomatter what i did, ctrl+alt+del didnt work either. So i had to stick in the windows cd, and ask it to repair it. And then it was just fine again. until i tried to update windows again and the same happend again.
I have then found out that it is the update KB928255 there makes my computer do so, by installing the updates one by one.
Anyone got any idea how to fix this?
 

More replies
Answer Match 58.8%

Let me start off by saying I sincerely need help please. I was handed this computer and asked to see if I could run windows update by my aunt because for some reason she couldn't. She had Comodo internet security installed but disabled I still don't understand that so I enabled and tried to update it. Comodo showed it was updated. Whats the use of having it if it's off. Then I tried to run microsoft update from the start menu. I can load in the browser the microsoft sight itself. Can open the start menu, click microsoft update, takes me to the sight, shows the screen about the active x control for about 15 seconds then goes to the error screen with an error code of : 0x80072EFF As soon as that screen loads another browser window opens and is directed to some random sight. I then tried the windows update in the start menu only to get a general 404 error screen (Internet exlorer cannot display this web page, diagnose error etc etc etc) I have searched for a solution to the error code but have found nothing that helps. I went through the steps of registering the dll's, editing the hosts file, turning off and on antivirus, firewall, and anything else I thought might help. Still couldn't update. That's when I decided to post here. Before I became registered and logged in completely this unhappy little computer popped up with a window that looked "hinky" with a microsoft update look to it, it was Antimalware Doctor Upgrade notice KB914187. N... Read more

A:browser hijack, unable to do windows update, a popup, then blue screen...

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

26 more replies
Answer Match 58.8%

I did a Windows Update. My computer was fine for a few minutes, then the blue screen appeared. My son quickly turned off power to my computer. He said the blue screen indicated that I was losing physical memory...When I started up my computer several minutes later, it got me to the user accounts screen. I decided to watch and wait, and again the blue screen popped up. Again, my son turned off power to computer...After several minutes, another attempt was made to start up the computer...All that came up were black screens...First the BIOS screen with the energy star appears, then goes black, then a black troubleshooting screen saying "We are sorry for your inconvenience..." with a count down clock of 25 seconds. This cycle of BIOS screen and troubleshooting screen repeats, until I again turn off the computer manually. This has happened before. It was solved by me getting so frustrated that I stored the computer until I could decide what to do. I just recently pulled it out of storage, and, lo and behold, it was up and running again...until today. Any suggestions? Also, the video card keeps popping out whenever I move the tower. Should I replace the computer case or junk the tower and start all over again?
 

A:After windows update, blue screen of death, then alternating black screens

Thank you for viewing my thread. Unfortunately, no one has replied since posting the threat, so I have gone elsewhere.

zerosmommy
 

1 more replies
Answer Match 58.8%

Did a rollback and problem stopped . Microsoft then reinstalled the updates and also straight away the problem started again. Has Microsoft come up with an answer to this annoying problem My lap is only a few months old HP Pavillion.

A:Windows 10 anniversary update causing blue screen crashes and restart.

Originally Posted by Windows Central Question Did a rollback and problem stopped . Microsoft then reinstalled the updates and also straight away the problem started again. Has Microsoft come up with an answer to this annoying problem My lap is only a few months old HP Pavillion. New Hp notebooks are fully compatible with AU.
Check code errors if availabe and ask Google and Microsoft support community.
I can suggest you downloading the Windows Media Tool for using the full updated iso for upgrading, instead direct updates, even without using usb keys or dvds

2 more replies
Answer Match 58.8%

Hello,

I have a blue screen problem that i can't find a solution to!

I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed).
The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.

My system is relatively new (a year and a half or so), i have:
Windows XP pro SP2
Asus P5AD2 deluxe motherboard with integrated sound-card
Pentium 4ht, 3.4Ghz, 2GB ram.
all my drivers are up-to-date as far as i know. The ATI drivers are certainly up-to-date

I have run some fix-it-utilities diagnostics and found no error or the like.

I previously had an ATI Radeon 600 series card, on the same system. Never had a problem with HL2, Far Cry, or whatever

Any ideas?

Thanks in advance,

Zurzu
 

A:Blue screen: stop error screen when gaming

16 more replies
Answer Match 58.8%

Hello: Today I received a blue screen stop error message. I was using my AOL software at the time it occurred. This is the second time it happened; the first time was about a month ago. Last time I upgraded the driver for my video card, and I thought that had taken care of it. I don't remember for sure, but I was probably using my AOL software when it happened last time also.

The message today included this information:

Technical Information:
*** STOP: 0x0000008E (0x0000001, 0xAFCAE925, oxA714438c, 0x00000000)
*** watchdog.sys - Address AFCAE925 base at AFCAE000, DateStamp 480254ab

The message from a month ago was slightly different. It included the following information:

Technical Information:
***STOP: 0x0000008E (0xE0000001, 0xB3ED1925, 0xA379D320, 0x00000000)
***watchdog.sys - Address B3ED1925 base at B3ED1000, DateStamp 480254ab

I restarted the computer without incident.

I'd appreciate any advice; thanks.

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz, x86 Family 15 Model 4 Stepping 3
Processor Count: 2
RAM: 2046 Mb
Graphics Card: NVIDIA GeForce 9500 GT, 1024 Mb
Hard Drives: C: Total - 472772 MB, Free - 305508 MB; F: Total - 476937 MB, Free - 432155 MB;
Motherboard: Dell Inc. , 0X8582, , ..CN7082155U50BD.
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated: Yes, On-Demand Scanner: Enabled
 

A:Solved: blue screen STOP error screen

16 more replies
Answer Match 58.8%

Hello,

I have a blue screen problem that i can't find a solution to!

I have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes:

I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed).
The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.

My system is relatively new (a year and a half or so), i have:
Windows XP pro SP2
Asus P5AD2 deluxe motherboard with integrated sound-card
Pentium 4ht, 3.4Ghz, 2GB ram.
all my drivers are up-to-date as far as i know. The ATI drivers are certainly up-to-date

I have run some fix-it-utilities diagnostics and found no error or the like.

I previously had an ATI Radeon 600 series card, on the same system. Never had a problem with HL2, Far Cry, or whatever

Any ideas?

Thanks in advance,

Zurzu
 

A:Blue screen: stop error screen when gaming

6 more replies
Answer Match 58.38%

My computer is constantly restarting by itself. When this happens a blue screen appears saying a "stop error" has occurred. When I send the error report, Microsoft tells me it is because of software was not installed properly. The thing is I have not installed any new software lately.
Any suggestions will help- Thanks
 

A:Windows XP "stop error" blue screen

Can you post the exact error message?
 

1 more replies
Answer Match 57.54%

hi i really need help with this, the blue stop screen has come on saying : windows did not find any installed linced language packs for the system default ui language. whatever that means. the stop code comes up as: STOP: 0x0000012A (0x00000001, 0x00000026, 0x00000000, 0x00000000)

ive tried entering safe mode but it wont let me, ive tried restoring to an earlier time and it wont do that either, it doesnt keep restarting the blue screen just stays on until i turn the laptop off and then it just comes back to a black screen saying repair or start normally niether of which make any difference.

is there any way i can fix this without losing all my files? any suggestions would be very much appreciated.
 

A:blue stop screen

Hi and welcome to TSGF try to boot to your bios try F2 on boot then change the boot order to cd\dvd drive as first boot device in the boot options then try running a repair from you install or recovery disc
 

2 more replies
Answer Match 57.54%

Hello,

I'm getting a blue screen error for no apparent reason. It started a few months back and is getting more frequent by the week. My computer is an LG laptop E500, which was downgraded from Vista to xp pro Service Pack 2. 0.99 GB RAM. There is a system control manager Ver. 1.0207.0516.31 and an LG intellegent update Ver. 2.02.0621.01 both as TSRs on the task bar.

If you need further info about my system please let me know how to find it.

The blue screen rotates between 2 different messages the important parts that change are.

kernel_data_inpage_error (Near the top of the page)
or
Stop: 0x000000F4 (0x00000003, 0x864E54, 0x864e564C, 0x805D1650) at the bottom.

One time windows gave me this error log at startup after an incedent:
BCCode : f4 BCP1 : 00000003 BCP2 : 864E54D8 BCP3 : 864E564C
BCP4 : 805D1650 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

My computer is only 1 year old plaease help me get a few more good years out of her.

How bad does it look Doc?

Thanks in advance,
Matisyahu

A:Blue screen stop

That error typically signifies a hardware issue. Memory or HDD would be the most logical. If it's still under warranty, you may want to contact the manufacturer before you start messing with it.

2 more replies
Answer Match 57.54%

Hi, Im from Argentina, soo... hi to every body! I'm NEW! , and sorry for my inglish.. it's good enought... :dead:


Well... here there are 8 minidumps of my windows. puke:

I tried making a new page file, I tried unistalling-reemplacing sound, RTL, mems... and also reinstalling windows... Updating drivers and... well.. looking in the mobo for broken parts. BUT STILL DID't FIND anything!


I just don't know what else to do... the mini dumps did't gave me any clue of what's going on!... :dead:

PLEASE HELP!!! :bounce:
 

A:Help!, Blue Screen Stop!!

Hello and welcome to Techspot.

3 minidumps crash with an Unknown_Image, and a bugcheck of 7F.

1 minidump crashes at ks.sys. It has a bugcheck of 7F.

1 minidump crashes at win32k.sys. It has a bugcheck of 8E.

2 minidumps crash at nv4_disp.dll. They have bugchecks of 8E, and D1 respectively.

1 minidump crashes at ntoskrnl.exe. It has a bugcheck of D1.

0x0000007F: UNEXPECTED_KERNEL_MODE_TRAP

One of three types of problems occurred in kernel-mode: (1) Hardware failures. (2) Software problems. (3) A bound trap (i.e., a condition that the kernel is not allowed to have or intercept). Hardware failures are the most common cause (many dozen KB articles exist for this error referencing specific hardware failures) and, of these, memory hardware failures are the most common.

0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED

A kernel mode program generated an exception which the error handler didn?t catch. These are nearly always hardware compatibility issues (which sometimes means a driver issue or a need for a BIOS upgrade).

0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL

The system attempted to access pageable memory using a kernel process IRQL that was too high. The most typical cause is a bad device driver (one that uses improper addresses). It can also be caused by caused by faulty or mismatched RAM, or a damaged pagefile.

As you can see from the above ram is the most likely culprit, but it could also be caused by other faulty hardware.

Try running yo... Read more

9 more replies
Answer Match 57.54%

This post is linked to another post: http://www.bleepingcomputer.com/forums/t/278155/your-system-is-infected/I am unable to start up my computer. I get a blue screw with the following message: STOP: 0x0000007B (0xF78A6524,0xC0000034,0x00000000,0x00000000)What do I need to do?

A:"STOP" Blue Screen

Since you are being helped in the other thread. I will close this one to avoid confusion for you and our members wishing to help.

1 more replies
Answer Match 57.54%

This error is on a Lenovo laptop running Windows XP. Recntly upgraded to SP3 and AVG2012.

Had a problem with MS Exchange being slow and noticed the outbox had a days worth of mail. Send / Receive did not clear so I went to reboot. The system went into a blue screen with something like chkdsk running (1-3 updates) so I left the machine run unattended. It competed and now the machine is locked into a loop with the blue screen and the Windows Recovery console. I have tried every reboot method (safe...Last Known Good etc..) but it is still locked in the loop.

The message is ....a problem has been detected in windows to prevent damage it shutdown....if this is the first time try restart....or else follow these steps..."Disable or uninstall antivirus software, disk defragmentation or backup utilities. Check hard drive configuration and check for updated drivers. Run chkdsk / F to check for hard drive corruption"

The technical information on the "stop" is listed in the Topic Description above. I haven't been able to follow the instructions on the blue screen because I can't get out of the loop.

Lenovo has the ThinkVantage button that would allow a restore to factory settings but I want to leave this as a last resort.

More replies
Answer Match 57.54%

I keep getting a blue screen that shuts down my computer the first one said it was going to erase the memory and then it said memory erase was complete now when I try to start the computer I get a blue screen with the error message UNMOUNTABLE_BOOT_VOLUME any help you could give would be greatly appreciated
 

A:Blue screen stop

I am getting a blue screen message technical Information
STOP: 0X000000ED (0x8230E900,0xC000000E,0x00000000,0x00000000)
 

3 more replies
Answer Match 57.54%

just recently i replaced a 56k modem in my friends computer. it worked fine...no problems...in a couple of days she asked me to come over and do a defrag....(she knows little about computers) i go over there to defrag her computer and the first thing i do is run msconfig and disable a lot of the crap she had coming up on her startup...not services..just the applications....i reboot and i get this stop message..

STOP: 0x0000008E (0xC0000005, 0x804E6BB4, 0xEF434744, 0x00000000).

i did a repair install of windows xp because she said she didn't want to lose anything she had on there but i've read a few threads and realized it's something to do with RAM? When i saw this i went to her house and pulled one stick out...same message...put the other one back in...same message..put it this way, i tried every combination and got the same results.

Just to make a note...She has 2x 256 ram chips.

Now, on another note, the only way i can boot her machine is if i disable all services. I can also boot her computer in safe mode. One time i disabled all services but microsoft services and i got the stop message. Then i tried it the other way around (enabled all non-microsoft services and disabled the microsoft services) and it booted.

i am stressed out because she calls me constantly. can anyone help.
 

A:Another STOP blue screen

"I did a repair install of windows xp because she said she didn't want to lose anything"...

Did you do a repair of XP or didn't you? If you didn't, please do an XP repair. It won't destroy any files or any settings. You will have to rerun Windows (Microsoft) Updates though. You can find the instructions here:

http://www.geekstogo.com/forum/How-to-repair-Windows-XP-t138.html
 

3 more replies
Answer Match 57.54%

When I load and try to use a photo Cd created by my film developer I get the following message complete with blue screen: ***STOP: 0X0000001E (0XC0000005,0XA0007328,0X00000000, 0X00000021) KMODE_EXCEPTION_NOT_HANDLED. What's wrong?
I use Windows 2000 Professional.
 

A:Blue screen***STOP

Is there a file name listed on the right at the top, first or second line? If not, it looks as though the program was trying to access System only addresses and that is not allowed. How are you trying to use the CD, by using the photo developers software or simply opening the files in a photo viewer like IE or Photoshop?

Please reply with more info and we can get a better idea as to how to fix your problem or at least give you a workaround.
 

2 more replies
Answer Match 57.54%

I have a dell 3000 and tried to start the os with xp pro and recieved the blue screen stop after the ready to install press f8. I cannot get past this screen and I cannot access any of the files on the hd because the hd is unable run without the os. What can I try?
 

A:blue screen stop

6 more replies
Answer Match 57.54%

I was told to come here for help. The previous thread that I was being helped with is here...http://www.bleepingcomputer.com/forums/ind...mp;#entry885770Thanks in advance

A:Blue Stop Screen

Hello rayandi,Oh we've got to stop meeting like this Please start with this scan. If I remember you did have an XP machine..Please download Malwarebytes Anti-Malware and save it to your desktop.alternate download link 1alternate download link 2Make sure you are connected to the Internet.Double-click on Download_mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan. If an update is found, the program will automatically update itself. Press the OK button to close that box and continue. If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button. The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".Click OK t... Read more

20 more replies
Answer Match 57.54%

i have an inspiron mini1011 the ref num is 09017.how do i get rid of the blue screen that pops up it says stop then a bunch of numbers and characters it says"UNMOUNTABLE_BOOT_VOLUME" on top and "*** STOP: 0x000000ED (0x86571C08,0xC0000006,0x00000000,0x00000000)"on the bottom, it wont let me passed the blue screen and ive tried everything
just about.

please help.
 

A:blue screen that says stop

16 more replies
Answer Match 57.54%

I've gotten two blue screens recently and I can't figure out why.

It happened, both times, when I was playing a hi-def movie with Media Player Classic.

System:

abit IP35 Pro mobo
Intel E8400 cpu
EVGA 8800GT gpu
Scythe Ninja heatsink
Corsair HX520 psu
8GB Corsair RAM

I've tested the memory and it seems fine, as do my hard drives. I've remounted the heatsink on the CPU.

Should I try updating the BIOS on the motherboard, since there are known problems with my cpu and mobo? Would that help? The only know problems are with temperature reading, and a BIOS update is said to fix them.

I had Windows check for a solution and it said there was most likely a hardware problem - RAM, CPU, power supply, or motherboard. I was hesitating to update the BIOS, but if it's a temp. problem with CPU, then I don't have much of a choice.

Here's what was in the pop-up window after I rebooted Windows:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 87B30020
BCP3: B2000040
BCP4: 00000800
OS Version: 6_0_6001
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\Mini082208-02.dmp
C:\Users\James Travis Rolko\AppData\Local\Temp\WER-74796-0.sysdata.xml
C:\Users\James Travis Rolko\AppData\Local\Temp\WER5FFD.tmp.version.txt

Read our privacy statement:
http://go.m... Read more

More replies
Answer Match 57.12%

Good Evening I have a Dell Vostro 10000 and horror of horrors I tried to boot and got the blue screen and this is what she read:
STOP C00000102{Corrupt FILE} The file or directory\program files\Norton Security Suite\Engine\4.3.0.5 is corrupt and unreadable. Please run chk dsk utility. I was able to open the pc in safe mode but cannot access the internet. I have malwarebytes anti-malware installed on my pc and I am currently running a full scan. If anyone has a suggestion or can help in anyway I would greatly appreciate any advice. Thanks in advance for any assistance!

A:Blue Screen STOP:C00000102

Using another computer and USB stick, get Norton Removal Tool: http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN and run it on bad computer.

1 more replies
Answer Match 57.12%

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 16393

Additional information about the problem:
BCCode: 1a
BCP1: 00041287
BCP2: 0000001C
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\041116-27734-01.dmp
C:\Users\My Pc\AppData\Local\Temp\WER-60093-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

More replies
Answer Match 57.12%

I have been experiencing the imfamous Blue Screen error recently. I only get this when attempting to backup the hard drive. Please help..Here is the information I have up to date.

BCCode : 1000007e BCP1 : C0000005 BCP2 : 80506824 BCP3 : F78EACA0
BCP4 : F78EA99C OSVer : 5_1_2600 SP : 3_0 Product : 256_1

C:\DOCUME~1\JODIER~1\LOCALS~1\Temp\WERf47c.dir00\Mini090508-02.dmp
C:\DOCUME~1\JODIER~1\LOCALS~1\Temp\WERf47c.dir00\sysdata.xml

Microsoft (R) Windows Debugger Version 6.9.0003.113 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\WINDOWS\Minidump\Mini090508-02.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp.080413-2111
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Fri Sep 5 10:46:54.453 2008 (GMT-5)
System Uptime: 0 days 0:32:12.149
Loading Kernel Symbols
...................................................................................................................................................................
Loading User Symbols
Loading unloaded module list
............
*******************************************************************************
* ... Read more

A:Bug Stop - Blue Screen - Volsnap.exe

You may want to look at Microsoft's MSDN STOP (BSoD) Error List

FYI: There's a Microsoft's System Error Codes list.

2 more replies
Answer Match 57.12%

I've been trolling through this website and many others to find the exact nature of my problem but I haven't come across any. From what I gather my problem can fall under many many different hardware/software problems but I am just going to go ahead and ask your advice anyway.

When I blue screen I get the following message

STOP: 0x0000009C (0x0000000000000003, 0xFFFFF880026D4B30, 0x00000000B6200000, 0x000000000002010A)

Now I have consulted with family members who are more switched on when it comes to the finer details of computing and they suggest that it is faulty RAM. Which I am inclined to believe as the blue screen occurs when I am running RAM intensive applications (Java based game (Minecraft)), it usually happens around the 65% mark. I've also taken Google's own advice of updating all system drivers. Everything is up to date.

Looking forward to your take on this.


Bucky
 

A:Stop error - blue screen

So check the memory using Memtest86
 

4 more replies