Tech Problem Aggregator

Error 1610 ? Configuration data for this product is corrupt (Nero install)

Q: Error 1610 ? Configuration data for this product is corrupt (Nero install)

Help !!

I had to clean up my system, reapplying SP2. I tried to reinstall Nero 7 using same installation package that worked previously. I get this error:

"the configuration data for this product is corrupt, contact support personnel"

I installed Windows Installer 3.1 and still have this problem. I cleaned out all references to Nero in the registry... no luck.

A: Error 1610 ? Configuration data for this product is corrupt (Nero install)

Start button, Run, regedit

Navigate to:

HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INSTALLER

You need to look under the key Features. By examing each of the keys found here you will eventually find one that very clearly states it is for Nero and state the version.

Nero will have two entries. One under Features, and one under Products. For example, my Nero 7 UltraEdition used these two keys to store its configuration information:

HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Features\62E2F0A3CB0C8B04495AA6AF7BBA0133

HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\62E2F0A3CB0C8B04495AA6AF7BBA0133

Your results are likely different only in the long number string portion at the end.

Delete the key under Features and under Products by right-cliking and choosing delete.

Reboot. Try the installation again.

1 more replies
Answer Match 79.38%

"The configuration for this product is corrupt. Contact your support personel " appears after ( starting windows). It does not go any further to load my desktop. I only get the option to press ok, which then just causes the screen to go black for a few seconds before bringing mr back to the same screen. Not sure what to do, please advise.

A:The configuration for this product is corrupt. contact your...

Did you have Windows 7 installation disc?

If you have, then follow this tutorial and go on the OPTION TWO to recover your computer.
System Recovery Options

7 more replies
Answer Match 75.18%

I think I may have made a big mistake, I inadvertently manually deleted ACDSee Pro2 and now I keep getting a Windows Installer dialog box that reads: “The configuration data for this product is corrupt. Contact your support personnel” I believe I may have deleted something I should not have. I’ve downloaded Windows Installer 3.1 and that did not help. I can load(install) other programs with no problems, but I can’t reinstall ACDSee Pro2 .I’ve downloaded from different sites and still the same results.
Anybody have any Ideas I can try. Thanks

A:Configuration Data Is Corrupt

hm maybe something in the registry is causing you greif? unfortunatly i dont know much in the feild of registry cleaners, someone else may be able to lend a suggestion or 6 :D otherwise just misc. search for acdse in there?

goodluck

15 more replies
Answer Match 73.5%

When I start up my computer, I get a message at the log in screen that reads:
 The Configuration data for this product is corrupt. Contact your support personnel. Then it won't allow me to do anything from there.
I don't know much about computers but I have tried to manually repair the boot configuration data but that didn't work. Could anyone please help me with this!! Thanks
 

A:Configuration Data Corrupt Message on Welcome Screen

Can you boot into Safe Mode?
 
What is the make and model of this computer?

2 more replies
Answer Match 63.84%

Windows 7 x64 system installed last week. All has gone well until a while ago...Adobe Acrobat downloaded an update and installed it, then asked to restart the machine.

At restart Windows quit and offered to restart normally or to repair itself. I let it try to repair itself, but it repeatedly failed, with the error:

*Boot configuration is corrupt.
Result: Failed. Error code=0x490*

In addition, I noticed that windows apparently is not finding the boot drive...looking at the repair log I saw:

System Disk=\Device\Harddisk\Windows directory-\\?\GLOBAL ROOT\Device\Harddisk1\Partition2\Windows

Windows appears to be looking at the wrong disk...it's installed on a new drive with only one partition. Using the Command Prompt option in the repair window, I could not access the *real* drive "C" (Drive 0), only Drive 1, which has two partitions for D and E.

Hiren's Boot CD running NTFS4DOS does not see drive 0 at all and also shows Drive 1, Partition 1 as drive C. Hiren's mini-WinXP shows a drive C designated as "System Reserved" - and shows Drive 1 as drives D and E on its partitions 1 and 2 respectively.

Mini-WinXP shows the otherwise elusive disk 0 as disk F.

I could sure use some ideas for a fix...I didn't have many to begin with and by now I'm down to none! Thanks in advance, if anyone can help.
 

More replies
Answer Match 63.42%

I have installed Nero 6 (v6.3.0.0) on my computer running Windows Me.

I can listen to audio CD's, write audio CD's, copy from one data CD to another, and read software data from a CD.

But when I try to write data to a CD, the process starts but then hangs. My hard disk access light stays on all the time and the light on the CD drive flashes. After about 2 mins the Nero log tells me there is a timeout error.

Because the process doesn't go to normal end of job I don't get any log from the program.

The data I want to write are jpg files, but the same thing happens when I try to write a small Word document. I have tried it with and without my anti-virus, but it makes no difference. I tried creating a mixed disk of audio and data. The audio was written OK, but the data hung the system.

Any suggestions appreciated.
 

A:Nero 6 data CD timeout error

6 more replies
Answer Match 63.42%

An error message appears while trying to burn data files onto a CD_R using Nero Express 5.5:

"Joliet names of these files (listed here in ISO-L3) are the same:
SOFTWARE.DOC
SOFTWAR2.DOC

Preparation of ISO9660 structures failed."

I can't locate the "SOFTWARE.DOC" files (???).

An Internet search of this problem turned up something about changing "bin file" locations (???) to correct the problem.

I had a spare CD burner and tried it to see if it is a hardware problem. Get the same error message with either burner.

The computer is running W98SE and is pretty well updated. There are no other problems evident. The CD burner has been in this computer for a couple of years with no trouble.

I ran "Hijack This" and found something called "LOADQM.EXE" which I removed, but it made no difference in the error message while trying to burn.

Any thoughts on this one?
 

A:NERO Error While Burning Data Into CD-R's

6 more replies
Answer Match 62.58%

I keep getting this error message at start up. It gives me the option of F1 to resume or F2 to enter set up. When I hit F1 it starts fine enough but I'm concerned about this. Follows is a start up list report and then a hijack this log.

start up list log

StartupList report, 4/15/2006, 8:49:48 PM
StartupList version: 1.52
Started from : C:\Program Files\StartUpList\StartupList.EXE
Detected: Windows XP SP2 (WinNT 5.01.2600)
Detected: Internet Explorer v6.00 SP2 (6.00.2900.2180)
* Using default options
==================================================

Running processes:

C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\GWHotKey.exe
C:\Program Files\MusicMatch\MusicMatch Jukebox\mmtask.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\Program Files\Logitech\MouseWare\system\em_exec.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\WINDOWS\system32\ctfmon.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\PROGRA~1\Symantec\NORTON~1\GHOSTS~2.EXE
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\ZoneLabs\vsmon.exe
C:\WINDOWS\system32\utilman.exe
C:\Program Files\StartUpList\Startu... Read more

More replies
Answer Match 62.58%

I recently booted up my Gateway notebook only to find the "blue screen of death"

I rebooted and it came up to a windows boot manager screen which says windows failed to start..insert installation disc and click repair to fix...blah blah...i'm sure you know the story...

My question is, I booted the Vista disc and when I click repair it doesn't even find the C: drive...when I try and run the BCD fix from the command prompt screen, it says it found 0 Windows installations...would this indicate a faulty hard drive?? If so, I dont mind replacing the drive, I just wanna make sure this is the issue before I spend the money to replace it...

Much thanks for any help anyone can offer!

A:Boot Configuration Data Error

I'm not sure what BCD fix you tried, but see if it is this one and if not, try this one.

To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps: (you need a Vista Installation Disk to do this)

1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
2. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
4. Click Repair your computer.
5. Click the operating system that you want to repair, and then click Next.
6. In the System Recovery Options dialog box, click Command Prompt.
7. Type Bootrec.exe, and then press ENTER.

Note If rebuilding the BCD does not resolve the startup issue, you can export and delete the BCD, and then run this option again. By doing this, you make sure that the BCD is completely rebuilt. To do this, type the following commands at the Windows RE command prompt:
 bcdedit /export C:\BCD_Backup
 c:
 cd boot
 attrib bcd -s -h -r
 ren c:\boot\bcd bcd.old
bootrec /RebuildBcd

See if that works.

If you don't have the disk (or that didn't work), try EasyBCD http://neosmart.net/dl.php?id=1 and see if that helps resolve the problem.

If that doesn't work, you probably have some type of hardware problem - but it's hard to tell. It may be as simple as the hard drive cable got disconnected a... Read more

3 more replies
Answer Match 62.16%

I have Windows XP Home, sp2. I recently had to repair Windows XP, and when I tried to use Quicken 2005, it didn't recognize it. So I tried to reinstall Quicken 2005, got it installed once, but it wouldn't let me set up my financial institution. So I uninstalled Quicken, did all the things Quicken said I should do, to clean out any leftover Quicken files on my hard drive and registry. I have been working with Quicken for two weeks now, to no avail. It keeps coming back with the error message #1610, after it starts to install Quicken. That error message is "configuration data is corrupt, etc." Yesterday Quicken's tech support called me and we tried again. They even gave me another Quicken 2005 to use in case my cd was defective, still same message. They said they have done all they could. that they felt it was a Microsoft problem. I went into Microsoft and searched for that error message and yes, it is a microsoft error message, they state that, but give no solution to solving it. So I wondered if you all have come accross this and know how I can fix whatever the problem is. Got to be something missing in my registry or something. I can install and have installed other programs, no problem. Just Quicken 2005. Help!! Need my quicken. Thanks. Josephine Hudson
 

More replies
Answer Match 62.16%

Does anyone no how to fix this? Yesterday I got a UAC Zero Access Virus and tried using windows repair disc to go back to a restore point. That just made everything worse and now I can't boot into windows at all. I have a multiboot PC (its set to just windows 8 and windows 7 right now, windows 7 being the biggest partition on the drive).
 
Recovery
Your PC needs to be repaired
 
The boot configuration data for your pc is missing or contains errors.
 
File:\Boot\BCD
Error code: 0xc000000f
 

A:The Boot Configuration Data For Your PC Is Missing or Contains Error

Can you boot into either of the two operating systems?

15 more replies
Answer Match 62.16%

Several times, and only from a cold boot, I get a pop-up stating "Boot Configuration Editor Has Stopped Working" However everything loads okay and functions. What might be causing this and what does it mean. IE: What function does this editor serve?

SYSTEM SPECS

INTEL I7-920 PROCESSOR
WINDOWS 7 HOME PREMIUM 64 BIT
12 GB TRI CHANNEL DDR3 SDRAM AT 1333 MHZ
ATI RADEON HD5670 1GB GDDR5
1 TB 7200 SATA 3.9 GBS 16 MB CACHE
CREATIVE SOUNDBLASTER X-FI
DELL WIRELESS KEYBOARD AND MOUS


Dave K.

A:Boot configuration data editor error win 7

Run Startup Repair on a cold boot.

More info on BCD here: http://technet.microsoft.com/en-us/l...8WS.10%29.aspx

5 more replies
Answer Match 62.16%

Have a HP compaq 6300 pro running windows 7 pro. today computer would not boot,
 
black screen came up it asks me to insert installation disc
 
scrolling down it lists the following
 
file \boot\BCD
 
Status: 0xc000000f
 
info: an error occurred while attempting to read the boot configuration data.
 
 
 
unfortunately since windows came preinstalled there was no installation disc
 
when I went to the windows support site to download one https://www.microsoft.com/en-us/software-download/home
it said since it was preinstalled to contact manufacturer.
 
my support/ waranty with HP for this computer has ended
 
Thanks in advance for any assistance in this matter
 
Bob J
 

A:error reading boot configuration data

If you have access to another Windows 7 computer create a System Repair Disk. Boot it and do a Startup Repair. It may take up to three attempts to fully do the repair. If you have 64bit then you would need to find a Windows 7 64bit computer.
 

2 more replies
Answer Match 61.32%

Hi, thank you. glad to be the newest member here. I have an Aspire S3 laptop Windpows 8 to 8.1 - that now has a BCD error blue screen upon start up that is error OXCOOOO0D - boot configuration data Recovery

Blue screen reads:

Your PC needs to be repaired.
The BCD is missing some required info.
File:\BCD
you'll need to use recovery tools...

I don't have an install/repair cd/dvd, and I don't have my product key - since its on the BIOS and is unretrievable. I want to save ALL my files so, please, if someone can help, thak you! All I tried so far is to get into the BOOT by pressing F2 and switched it from UEFI to Legacy only it asks for BOOT disk...

A:windows 8.1 error 0xc00000d boot configuration data

Bump.........

9 more replies
Answer Match 61.32%

I have a Dell and won't boot giving a black screen but will boot after about 10 turn on and offs. It is very annoying and have uploaded the latest drivers for the system. Since installing Windows 7 there seems to be this erratic problem with the Dell XP. Anyone have an idea about how to fix this problem?

A:[MOVED]Re: Boot configuration data editor error win 7

Moved from this topic: http://www.techsupportforum.com/f217...ml#post2898619

1 more replies
Answer Match 61.32%

My Dell Insperion 15 now has this boot error. I tried using the recovery USB from my HP. It is smart enough to know that I'm not trying to reboot the HP computer so it doesn't work. This is so frustrating. What to do?

A:windows 8.1 error 0xc00000d boot configuration data

Check HDD with this: Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.
Test your RAM: RAM - Test with Memtest86+ - Windows 7 Help Forums
one stick at a time eight passes per stick
Drive letters in WinPe will probably be different from what you see in windows - that is normal.

I would delete the bcd store and run the commands again. You should be pointing them at the reserved system partition .

Otherwise, at cmd prompt, type:

diskpart

lis vol

( Look to see the drive letter for your main windows partition - if it is D then type as below, otherwise replace D with the letter diskpart gives for the main windows partition)

sel vol d

act

exi

bcdboot d:\windows /s d:

bootsect /nt60 all /mbr

restart the pc - you're good.

7 more replies
Answer Match 61.32%

Help I can't get past the booting error and there is no way for me to pass this? I've tried many things and can't get past it

File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configuration data.

OS: Vista x64 Bit

A:Error while attempting to read boot configuration data?

Please see this article. It has some suggestions. https://neosmart.net/wiki/0xc000000f..._48120c000000f

1 more replies
Answer Match 61.32%

Hi, I was running Windows 7 on a Dell Vostro 3700 Laptop..After doing a spyware scan and finding and deleting all the entries I found, the next time I turned it on I get the error: oxc000000f "An error occured while attmepting to read the boot configuration data File: \Boot\BCD"

I have looked online for solutions and tried using the Windows 7 disc (a copy) and also tried using 3 recovery disks, these all fail because it just stays completely black with a cursor (left for hours even) or I get a error message something around the lines of "insert correct boot media into the correct boot device" and I have no idea what this means. I cannot do a repair because I can only get the Windows disc to load if I remove the hard drive?? this is the only way I have got it past the green loading bar, so I am stuck and have no idea what to do..it only seems to respond to cds if the hard drive is removed?.. this all happened very suddenly and now I have a very expensive ?800 paperweight.. Any help massively appreciated!

To add to this - I also tried the command prompt typing the bootrec.exe code that I found on the internet..selecting command prompt from the option when the Windows 7 disc was loaded, but basically it came up with an error of some sort and it had a drive letter of X:/ on the command prompt ?? ..Also to get to this the hard drive was removed because like I said I cannot get the discs working with it in.. I'm guessing this means the hard drive is screw... Read more

A:Error oxc000000f Need help repairing Boot Configuration Data??

Are selecting the optical drive as your boot device for the windows install disk? sounds like maybe with the hard drive removed its defaulting to the optical drive and booting correctly. Also, make sure you have a good copy of the windows disk.

8 more replies
Answer Match 60.48%

Hi all, im getting that message upon startup. Im running windows 7.
It requests for the windows recovery CD to be inserted, so when I put the CD in to boot I get a "windows is loading files" then a starting windows with the windows logo then just a black screen with a cursor, I left it like this several times for at least an hour an nothing happened.
I can't press F8 to access safe mode etc, nothing will happen.
Pressing F12 to boot from CD just does the same thing as putting the CD in normally.

Help please!?

A:An error occurred while attempting to read the boot configuration data

It seems the CD is damaged.
Burn a new Windows 7 Recovery CD on another computer.
You can download the image or make a copy of a functional Windows 7 Recovery CD.

Boot the new Recovery CD and run automatic StartUp Repair up to three times as sugested in the forum manuals !

Good luck!

1 more replies
Answer Match 60.48%

Hi
 
This is the full error message I encountered--> An error occurred while attempting to read the boot configuration data File: \Boot\BCD
 
1) I have an old Dell Vostro 410, Windows Vista, configured to RAID 1 the whole time.
 
2) I wasn't able to boot it up one day, pressing the on button only got an amber light momentarily. From the symptom,  I replaced the CMOS battery as suggested by someone online and the PC was able to be powered up but it got to a blue screen--> https://www.dropbox.com/s/nyeoq0gwz4i3f2b/2013-12-21%2000.44.17.jpg
 
3) I realized that's because all the settings on BIOS has been wiped out after I took out the old battery, the "SATA mode" in BIOS was set to IDE instead of RAID, so I set it back to RAID as shown--> https://www.dropbox.com/s/u6oxdg8m092v0vr/2013-12-23%2000.01.31.jpg
 
4) I tried rebooting the the system again, this time I can see that RAID has been setup accordingly-->  https://www.dropbox.com/s/a708qln2oehrm75/2013-12-23%2000.03.57.jpg   and  https://www.dropbox.com/s/1sfrpfrxtkgke2n/2013-12-22%2023.58.37.jpg
 
5) But the rebooting was terminated with the message "an error occurred while attempting to read the boot configuration data" --> https://www.dropbox.com/s/orgkn29qaj0nxsb/2013-12-22%2017.48.20.jpg 
 
6) Following the on screen instruction, I tried booting from "Windows installation" CD to repair it, however after pressing a key on the following screen,... Read more

A:An error occurred while attempting to read the boot configuration data

When you removed the CMOS battery it set the BIOS to the default settings.  I suspect you will have to rebuild your RAID configuration.

3 more replies
Answer Match 60.48%

system configuration data updated ERROR,--Need a solution I have a
fairly new Gateway M-1625 laptop running windows vista 32 bit, sp1.
I turned it on and beeped twice (beep, beep) and gave me an error
message that reads "system configuration data updated ERROR, system
configuration data read error"
Press f1 to continue f2 to enter set up.
I pressed f1 and it sent me to another blank page that reads.

Windows failed to start. A resent hardware or software change might be
the cause. To fix the problem:
1. Insert your windows installation disc and restart computer
2. Choose your language settings and click next,
3. Click ?repair your computer.?
If you do not have the disk, contact your system admin. Etc
Tried the repair disc, tried reinstall from Restore DVD still get the
same message.

Tried the bootrec.exe/fixmbr (worked)
Tried the bootrec.exe/fifixboot (Worked)
Tried the bootrec.exe/Rebuildbcd
Tried reseating the memory and hard drive.

Still at the same point. Even tried to install XP over it but never
could get it to go.

Now I am back to where I started. I already replace the hard drive so i know is no that I think this is a boot problem.

what can I do???

More replies
Answer Match 60.48%

ok i had some recent windows updates succesfuly and rebooted, since that at start up im getting "Error msg : Boot configuration data editor has stopped working"
any way to sort this ? what cause it ?
Have tryed system restore several diffirent restore dates but still the same.

Using a Dell studio xps 8100 win7 home edition 64 bit .

A:Error msg : Boot configuration data editor has stopped working

Try running system file check .

SFC /SCANNOW Command - System File Checker

4 more replies
Answer Match 60.48%

Hi, I was running Windows 7 on a Dell Vostro 3700 Laptop..After doing a spyware scan and finding and deleting all the entries I found, the next time I turned it on I get the error: oxc000000f "An error occured while attmepting to read the boot configuration data File: \Boot\BCD"

I have looked online for solutions and tried using the Windows 7 disc (a copy) and also tried using 3 recovery disks, these all fail because it just stays completely black with a cursor (left for hours even) or I get a error message something around the lines of "insert correct boot media into the correct boot device" and I have no idea what this means. I cannot do a repair because I can only get the Windows disc to load if I remove the hard drive?? this is the only way I have got it past the green loading bar, so I am stuck and have no idea what to do..it only seems to respond to cds if the hard drive is removed?.. this all happened very suddenly and now I have a very expensive ?800 paperweight.. Any help massively appreciated!

To add to this - I also tried the command prompt typing the bootrec.exe code that I found on the internet..selecting command prompt from the option when the Windows 7 disc was loaded, but basically it came up with an error of some sort and it had a drive letter of X:/ on the command prompt ?? ..Also to get to this the hard drive was removed because like I said I cannot get the discs working with it in.. I'm guessing this means the ha... Read more

A:An error occured while attempting to read the boot configuration data!

Go to your BIOS and set the CD as the first boot device, your hard drive as second.

If this lets you boot from the Win7 CD with the HDD installed run Startup Repair - Run 3 Separate Times.

7 more replies
Answer Match 60.48%

This is the error message that my computer had:
"Recovery
Your PC/Device needs to be repaired
The Boot Configuration Data for your PC is missing or contains errors
File:\EFI\Microsoft\Boot\BCD
Error code: 0xc0000185
You'll need to use recovery tools. If you dont have any installation media (like a disc or USB device), contact your PC administrator or PC/Device manufacturer.
Press Esc for UEFI Firmware Settings"
I made a recovery drive and set the UEFI to a USB boot, and when I tried to boot it with a blank USB it didnt recognize it, but when I used the recovery usb it recognized it. I did that to check and see if it actually recognized the recovery data.
Now when I boot it just has the Lenovo screen and the swirling dots. it's been doing this for about a half hour. Is this normal or is there an issued with the hatdware?

A:Boot Configuration Data is missing, Error Code 0xc0000185

The Error code: 0xc0000185 is an I/O error.
This can be a hardware problem or a software problem.
So the first thing to do is to run diagnostics on the hard drive ( http://www.carrona.org/hddiag.html )

If you have difficulties booting to the disk/drive, post back and we'll see about changing some settings in the UEFI to allow the boot.
I'm working on a drive that will do this for you, but it's still in the testing phase (and it's a 700+ mB download).
 
If the drive is dead/dying, you may have problems trying to recover your data.
Do you have a recent backup?  If not, post back for suggestions on how to best backup your information.
 
FYI - if it is dying, then it's best not to use the drive at all until you've done the backup.
If the drive does die fully, then data recovery gets very expensive (up to $2000 (US)) if it's even possible.

0 more replies
Answer Match 60.48%

Hi everyone,

I tried to install new updates of Ableton live and the machine crashed badly... and since them it has really gone a bit wonky.

When I press the on button to boot up the laptop I get the following message.

The Windows Boot Configuration Data (BCD) Store file contains some invalid information.

Object : GUID : (8cb2db4-7co5-11de842e-bt611d44fefa)

Description: Windows recovery format.

Status: oxcoooooo24

Info: The configuation for an element within the object is invalid in the boot configuation store.

The assiocated windows boot loader entry may not be available for selection until the problem is rectified by an administrator.

Enter= continue.

So then I press enter... it boots up. (in about 5 seconds as it is a ssd...)

When I do this action: to see if I can do a restore etc...

Start-Control Panel- the progress bar at the top of the expoler window freezes half way and I cannot access any of the menu Items.

Also I canot move this panel or close the window.

I have a back up on another external drive ..... plus I have made a repair disk and so on when I first got the machine.

I would be stoked if you could provide me with the next steps so I can resolve this situation.

Thanks for your time, now lets party on and delve deep into the abyss

A:Windows Boot Configuration Data (BCD) store file error.

Hallo,
hatte auch einen 0x0000024 BCD Fehler. Hatte vor einer Installation die alte Partition auf "VERSTECKT / HIDDEN" gesetzt und nach der Installation vergessen die Partition wieder auf "Partition anzeigen / Show partition" zu setzen und erhielt so bei Bootversuch einige Tage sp?ter den x24 Fehler. Nach dem "ANZEIGEN" funktionierte der Boot wieder.

2 more replies
Answer Match 60.48%

Hi everyone,

I have windows 8.1 and Lenovo y510. After upgrading from 8.0 to 8.1 a have several problems with my PC. Right now suddenly i cant start my PC.

I have BSOD
Recovery
Your PC needs to be repaired.

The boot configuration data file is missing some required inforamtion.
File\BSD

Error Code:0x0000034
Need to use recovery tools on your instalation media. If you dont have any contact your system administrator or PC manufacturer.

ESC for UEFI firmware setting.

I try different setting in setting utilty (after pressing ESC) and nothing changed.

I dont have any USB or Disc with windows. (but i do have legal copy - it was already installed in my PC) so i cant use any of help with restoring pc from instalation media.

Do you have any idea what to do ?
Thank you very much. A need it pretty serious that pc because of school

A:Error 0x0000034 - Boot Configuration Data File is Missing

From the Repair CD/USB:
How to do a Auto Repair:
Automatic Repair - Run in Windows 8
Note: You may need to do startup repair 3 to 4 times.
Startup Repair - Run 3 Separate Times - Windows 7 Help Forums

Have you made the OEM manufacturer's Recovery Disks?

   Information

We always assume you have made your Recovery Disks using the OEM manufacturer's Recovery Media Creator app the first day you had your new PC.
& made the Startup Repair CD. (Windows 8 only)
Recovery Drive - Create with USB Flash Drive in Windows 8
System Repair Disc - Create in Windows 8 (Windows 8 only)




I would recommend you making the OEM manufacturer's Recovery DVD's or USB drive.
or
You can order the Microsoft official OEM Recovery disks from the OEM manufacturer's website.
From the manual for Lenovo G480.







Originally Posted by Lenovo


When the hard disk drive or solid state drive is replaced because of a failure, no
product recovery program is on the new drive. In this case, you must use the
Recovery Disc Set for the computer. Order the Recovery Disc Set and the drive at
the same time so that you can recover the new drive with the pre-installed
software when they arrive.



You can Order Lenovo Recovery Disks from here:
Lenovo Support - Home (US)
Click on Parts & Accessories.

2 more replies
Answer Match 60.48%

Acer E1-571: Windows 8.1, 2.4 GHz Intel i3, 8 GB ram, Intel HD 4000

So I recently recovered my computer from corrupt display drivers by booting into safe mode and uninstalling the bad drivers. So Windows is working good as ever except the fact that I have no official drivers installed. So I downloaded the latest drivers from the Intel website and when I try to install the drivers from Device Manager it gives me an error saying the "configuration registry database" is corrupt. I tried running the installer from safe mode and even tried older drivers to no avail. I also backed up my registry and ran Ccleaner on it. Is there anything else I can do? I sadly don't have any restore points for it. Thanks in advance.

A:Can't install display driver "configuration registry database corrupt"

See if this tutorial helps: SFC /SCANNOW Command - System File Checker

1 more replies
Answer Match 60.48%

Error: Windows failed to load because the NLS data is missing or corrupt ... pls help me to solve this problem..

A:NLS data is missing or corrupt error

Now let's try the following methods to troubleshoot the issue.

Method 1: Startup Repair from the Windows Recovery Environment (WinRE)
============================================
1. Insert the Windows Vista installation disc into the disc drive, and then
start the computer.
2. Press a key when the message indicating "Press any key to boot from CD
or DVD ?*". appears.
3. Select a language, a time and currency, and a keyboard or input method,
and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your
Windows installation and click Next.
6. In the System Recovery Options dialog box, click Startup Repair.

Method 2: Rebuild BCD
============================================
1. Put the Windows Vista installation disc in the disc drive, and then
start the computer.
2. Press a key when the message indicating "Press any key to boot from CD
or DVD ?*". appears.
3. Select a language, a time, a currency, and a keyboard or another input
method, and then click Next.
4. Click Repair your computer.
5. Click the operating system that you want to repair, and then click Next.

6. In the System Recovery Options dialog box, click Command Prompt.
7. Type Bootrec /RebuildBcd , and then press ENTER.

Method 3: Use the Windows Recovery Environment (WinRE) to run System Restore
============================================
1. Instert the Windows Vista installation disc into the disc driv... Read more

6 more replies
Answer Match 60.06%

Hi All,
 
I have read most of the messages related to this. Unfortunately ASUS doesn't ship with a Vista disk and the Recovery DVD doesn't boot.
 
Details shown are
 
File:   \Boot\BCD
Status: 0xc000000f
Info:  "an error occurred while attempting to read the boot configuration data"
 
Operating medium - Windows Vista
 
Any suggestions, Pls? I may have to return to Techs who MAY have a Vista disk.
 
Cheers

A:an error occurred while attempting to read the boot configuration data (Vista)

Hi Wawny,
 
Thank you for the post.
 
The error message usually indicates that the boot sector is damaged or missing.
 
We can try to use the following methods to troubleshoot the issue. However, performing the following steps requires a Windows Vista installation disk. If you do not have a disk, please contact your computer manufacturer or Microsoft Customer Service or to obtain one.
 
Microsoft Customer Service: (800) 426-9400, available Monday through Friday, from 6:30 A.M. to 5:30 P.M. Pacific Time.
 
Note: Microsoft Customer Service mainly handles issues regarding replacement manuals, disks, drivers and service packs, product IDs, lost CD keys, product orders, policies related to copying software on additional computers, licensing, and product registration.
 
Method 1: Startup Repair from the Windows Recovery Environment (WinRE)
============================================
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer. 
2. Press a key when the message indicating "Press any key to boot from CD or DVD ?". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next. 
4. Click Repair your computer. 
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next. 
6. At the System Recovery Options Dialog Box, click on Repair your computer.
7. Click the operating system that you want to repai... Read more

15 more replies
Answer Match 60.06%

I am using Nero BackItUp 2.0.0.0 (Nero Ultra 7) and have been receiving "data verification failed" and "Sector NNNNNN on disc has different content to source" errors recently. On the same PC (Win XP Pro SP2), I got the errors using two different burners (an HP and a Sony) and trying both a DVD/RW and a DVD/R. FYI, I use Shadow Copy for the burn, the burn process completes without error every time (i.e. - the error only occurs during verification), and I have burned to the DVD/RW many times before without incident. More generally, I didn't get data verification errors before so I am wondering why I might be getting them now. Also, could someone tell me what, exactly, "Sector NNNNNN on disc has different content to source" means? I assume it means that the source and target files are not matching in some cases. More importantly, is it a big deal? I ran the ScanDisc in Nero CD-DVD Speed and both DVDs had 100% good sectors (0% damaged or bad). Nero log file attached.

Thanks,

Aaron Allen
Albuquerque, NM
 

More replies
Answer Match 59.64%

FRICK!! AAAHH. i try to play Battlefield 1942.(usually w/ the desert combat mod) and most of the time it crashes while i am joining the game. an error pops up and sayes "corrupt data". it never used to but now it does quite often. Any1 with help please reply. thx.
 

A:battlefield 1942 corrupt data error

well, i don't play that particular game, but i play similar ones. usually it's corrupted map files that do that. if you have a folder named "cache" ... open it up and empty it out. or maybe it would be called "temp" or "temp files".

good luck.

V***V
 

1 more replies
Answer Match 59.22%

Hi,

I have exactly the same issue as the person on this page, however I have already tried the three solutions and neither work, further explanation below.

http://social.technet.microsoft.com.../thread/022386ba-a445-44ba-97f7-d8ba4b6cc54b/

I was watching a DVD on my PC last night when it began to stutter and finally the system completely froze. I would like it 5 min and then the PC would work again for roughly 5 sec before crashing again, I let this go on for about 20mins but the PC never fixed itself so I rebooted. On rebooting I got the above message.

1. My first attempt to fix it was using safemode, this however didn't work and it prompted me to use the repair progam on the Vista installation disk .

2. I booted from the vista disk and tried a start-up repair. This ran, said something was fixed and asked me to reboot. I did this but to no avail therefore I went back to the repair centre.

3. I did not have system restore turned on so this option was not useful to me.

4. I then read something suggesting I use Bootrec. However I tried running bootrec /RebuildBcd but it could not find my OS, instead I used the following commands;

* bcdedit /export C:\BCD_Backup
* c:
* cd boot
* attrib bcd -s -h -r
* ren c:\boot\bcd bcd.old
* bootrec /RebuildBcd

This however didn't work either.

5. I left the PC overnight and now things seem to be worse. When I try and use repair centre it does not actually detect a HDD with Vista installed, it does however still let me p... Read more

A:Answer an error occurred while attempting to read the boot configuration data (Vista)

If you can take the HD out and put it into another PC as Slave and see if your data is still readable.
 

1 more replies
Answer Match 57.96%

I am trying to install Nero 2014. I have a previous version on this PC. When I try to install, it fails with Error 1158 (see screenshot). I have tried several things that have been suggested from doing a google search for this problem, such as running as Administrator and starting as "diagnostic startup" and I still get the same error. I tried installing it by starting Win 7 in Safe Mode (with and without networking) and it tries to install but one of the add ons that it needs (Microsoft XML 4.0 SP3) will not install in safe mode so it aborts.

I tried installing this on my Win 8.1 system and it installed without problems. The Win 8.1 was the full install, not a diagnostic startup, etc.

I posted on the Nero forum but what was suggested there did not help. My Win 7 system is relatively clean as I do not have a lot of startups. I do not have Skype or anything similar. I have MSE and Malwarebytes. Those are not loaded with the diagnostic startup, which also failed with the 1158 error so I assume what is in startup is not the issue.

Error:

A:Nero Install Error 1158

Solved. I had to manually download and install Microsoft XML 4.0 SP3. Then install in Windows 7, using Windows 7 Compatibility Mode (and as Administrator).

The problem would appear to be in Nero 2014's installer program.

5 more replies
Answer Match 56.7%

I'm getting these two error messages towards the end of the installation of Impulse:
1: Error Parsing
RegASM.exe Configuration Parser error
C:\Windows\Microsoft.NET\Framework|v2.0.50727\config\machine.config
Parser returned error 0xC00CE556

2: Error Parsing
Impulse.exe Configuration Parser error
C:\Windows\Microsoft.NET\Framework|v2.0.50727\config\machine.config
Parser returned error 0xC00CE556

I've already tried a clean install and a reinstall of .NET Framework. Please help, this program is essential. Already tried compatibility mode, too, with no effect.

A:[SOLVED] Configuration parser Error during and after install

Addendum: Stardock support says this is not a problem with Impulse itself, and the Microsoft support system hasn't been helpful. Need third-party support; namely, this tech forum.

3 more replies
Answer Match 55.86%

Error 2753 for Product ID install file.




All my posts are my opinion.

More replies
Answer Match 55.86%

Hi All,

This is what I get when I try to start Norton by clicking on the Norton Icon, and nothing happenes.

Can anyone please help?

Thanks!,
Thee

A:Error: "8504,106" after I install my Norton 2010 product

I'm not 100% sure but this may offer you some help with your problems.http://www.symantec.com/norton/support/kb/...;selected_nav=6

2 more replies
Answer Match 55.86%

entered product key. started to download but en counted an error 8504AE. It tells me to ring a toll free phone number which is based in America to get Norton support.Is this true?

A:Using Norton Install with Product Key triggered error 8504AE

I don't know why anyone would pay for Norton when there are so many decent freebies available?Have a look here: https://support.norton.com/sp/en/us...

5 more replies
Answer Match 55.86%

Hello,

My wife's PC started generating a BSOD with an error reference to a boot file. So I am attempting to use the recovery disks to repair the install. I ran the install and now the BSOD is gone and windows is attempting to start in repair mode but after the Wk2 loading screen I get the following prompt:

The file "NT5INF.CAT" on Window 2000 Professional CD-ROM is needed.

Type the path where the file is located and then click OK."

There is a drive pulldown with the title "Copy from this:" and the default is "GLOBALROOT\DEVICE\CDROM1\I386" The pulldown menu also has the option of "G:\"

If I click OK nothing happens. I moved the CD over to this PC and found that the file is under the following directory on the CD I386\NT5INF.CAT. The two optical drives are F and G, so I tried typing G:\I386\NT5INF.CAT or F:I386\NT5INF.CAT and switching the CD from each of the drives, but although the drives light up on boot and when the CD is inserted, they are not responding these drive paths when I click OK at this prompt.

Does any have any ideas? Shouldn't this just be a drive path? Is there a special command I missing?
 

A:(Wnk2) Failed To Install Product Catalog Error

10 more replies
Answer Match 55.86%

I PUT IN MY NAME EMAIL PHONE THEN DOWN LOAD I GET A ERROR 8504AE IT SAY MY ENTERNET BROWSER IS NOT UP TO DATE SO I UP DATED IT TO 11 STILL GIVES ME THE ERROR

More replies
Answer Match 55.02%

On boot up the laptop beeps twice and the message "system configuration data read error" appears with F1 to resume or F2 to setup. If I hit F! it boots up as normal. When I switch off and reboot the same ting happens every time...help its driving me crazy !!

More replies
Answer Match 55.02%

I picked up this lenovo laptop and shortly after I got it the HDD went out. I replaced the HDD and Installed a full version of Windows XP SP2 then used the Win 7 upgrade disc I bought. I did a clean install of the Win 7 then I activated it at that time without any issues. Some time after that I started getting the message it wasn't a genuine copy. I rearmed the time period but I'm not able to activate the copy again with the PID. I get the message this product is for upgrade and not a clean install. I need to find out if I will be able to register this copy or if I will need to start over from scratch. I did try putting in another PID but it didn't activate with it. I haven't been able to change the PID back due to the message I am getting about the upgrade not clean install.

I appreciate any help I can get with this issue.

Code:

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-GJY49-VJBQ7-HYRR2
Windows Product Key Hash: W5/6nm6F2UPXrCkY5xUhXb/+21g=
Windows Product ID: 00426-OEM-8992662-00006
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {B7CDA3F9-04BA-4675-9B81-E8C61611D67C}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
... Read more

A:Product key giving product is upgrade not clean install on activation

Code:
Windows Product ID: 00426-OEM-8992662-00006
Thats an Acer OEM. You cannot install it on a Lenova.

9 more replies
Answer Match 54.6%

I'm going to be making changes to my hardware in a month or two. All of these changes won't be made at once and I don't want to be having problems with activation, reactivation and re-reactivation because of soon-to-be changes to my NIC, hard disks, partitioning, main board and processor, etc. and I may even be adding RAID1 at some point.

So, does Nero 7 use a product activation that locks it to my hardware?

If it does, I want to wait to make the purchase.
 

A:Does Nero 7 use a product activation that locks it to my hardware?

12 more replies
Answer Match 54.18%

"windows 7 setup.exe corrupt file the file or directory is corrupt"

I'm trying to install 7 32bit OEM Home Premium with the legit bought holographic CD (not a burned image of any kind) onto a Gateway laptop with a brand new hard drive.

I was getting this error installing the OS the regular way booting to the cd and installing from it, so instead I copied the contents of the cd to a freshly quick formatted NTFS partition on the new laptop hard drive, then used bootsect and diskpart to setup the disk. It boots just fine and also gets the same error installing straight from the hard drive.
Is there some kind of update I need to slipstream into this cursed cd? How would I go about doing it? Thanks.

A:Getting the setup.exe corrupt file install error help!

Your DVD is probably damaged, return it for a fresh one.

9 more replies
Answer Match 53.76%

Hey folks,

i have a computer with trouble installing IE9 and IE10.
Already did sfc /scannow and several times CheckSUR.
Heres what CheckSUR says:


Code:
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 18.0
2013-05-29 14:19

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_2_for_KB2699988~31bf3856ad364e35~x86~~9.4.1.0.cat

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f) CSI Payload File Missing 0x00000000 msado20.tlb x86_microsoft-windows-m..do-backcompat-tlb20_31bf3856ad364e35_6.1.7600.16688_none_eaf088a653669fe9

Summary:
Seconds executed: 674
Found 2 errors
CSI Payload File Missing Total count: 1
CBS Catalog Corrupt Total count: 1

Unavailable repair files:
servicing\packages\Package_2_for_KB2699988~31bf3856ad364e35~x86~~9.4.1.0.mum
servicing\packages\Package_2_for_KB2699988~31bf3856ad364e35~x86~~9.4.1.0.cat
I assume my problems would be fixed if i put the two "unavailable repair files" in the Windows\Temp\Checksur\... folder.
Unfortunately I don't have another x86 Win7 machine to copy the files from.
Any help would be appreciated!

A:IE9/IE10 Install Error 9C48 / CBS Catalog Corrupt

First things first - let's see how much else may be a problem....


Please follow the Windows Update Posting Instructions and post the requested data

9 more replies
Answer Match 53.34%

Hello,

Burned jpg's to CD, but when I viewed them using ACDSee, the bottom half of most of the pictures are black - with a message that the data stream is corrupt.

I recall seeing that some of them were like this before I burned them to the CD, but many more of them are now affected.

Would it be better to save them in a different format? Could it be because they were put through DCEnhancer before being saved, or because I edited them through ACDSee?

This is a real pain as half of my pictures are useless.

Thanks for any thoughts on this.

Bye,
Penny.
 

A:Fujicam - "Data Stream Corrupt" Error Message

Just bumping this query - Has any one any ideas, please.

Thanks,

Penny
 

3 more replies
Answer Match 53.34%

When trying to start Windows Live Mail I get an error message stating "Windows Live Mail could not be started. Closing Windows Live Mail. Your calendar contains corrupted data that is forcing WLM to close".

The error number is 0800010105.

I have researched this on the internet and found numerous possible solutions and have tried all of them with no luck in solving the problem. So far I have tried:
1. Uninstalling and reinstalling Windows Live Mail.
2. Running repair on Windows Live Mail.
3. Checking the date and time and unchecking the box to adjust for daylight savings time.
4. Deleting the Calendar folder under the Windows Live Mail folder.
5. Deleting my Hotmail Calender on the web and creating a new calendar.
6. Creating a new user account and running Windows Live Mail under that account (same result).
7. Resetting Internet Explorer to the default settings.

I am including the WindowsLiveMail.log file as follows:

* Log opened: 2011-11-04T19:31:26Z
*
* Windows Live Mail 15.4.3538.0513
*
*********************************************************************************
[15:31:32.63] 269c Calendar: Chk ERROR: (wcdatastore.cpp:222), failed with 0x80010105
[15:31:32.63] 269c Calendar: Chk ERROR: (wcdatastore.cpp:81), failed with 0x80010105
[15:31:32.63] 269c Mail: Zone_MailChk ERROR: (calplatformmanager.cpp:1014), failed with 0x80010105
[15:31:32.63] 269c ... Read more

More replies
Answer Match 52.92%

Not sure how this really happened actually.

Earlier today I was trying to merge some partitions with Partition Magic 8.0 on my hard drive. There were two of them (disk 1). Now, I also have a 1TB disk (disk 2), with also 2 partitions C and D. C is about 880 GB-s big, and D which is about 60 GB-s has my Windows 7 installed. Now the good thing is that my brother has accidentaly installed Windows Vista on my D drive., so now I can Dual Boot, and maybe fix this problem.

While i was trying to install a program, my PS suddenly rebooted all by itself... Blue screen came up, saying some memory storage has been lest, and it's trying to recover it (not really sure about that part) .
From that point I couldn't boot on Windows 7 anymore. Tried windows repair function, couldn't repair it, and it said in log that a root cause was found and that it is "boot configuration is corrupt".

Now I am booting it on Vista, and with Acronis True Image Home, I made a backup of the D disk, because I have some imporatan files there. But when I tried I to format it, with Paragon Partition Manager 8.0, I saw that I can't do anything with my whole disk, meaning partition C and D...thus I cannot format my partition on which lies the problem.

I should also mention that while i was trying to merge the partitions on my other Hard Disk, like I mentioned earlier, with my Partition Magic, even then Disk 2 was flagged with yellow color and it said it was: "Bad".

Any i... Read more

A:boot configuration is corrupt

16 more replies
Answer Match 52.92%

I have a Hp pavillion with vista laptop and I turned it on and it ask me to launch repair or start normally. I launched repair and it did nothing. I restarted it and it came up again. It said:::::Boot configuration is corrupt----repair action: Partition table repair----results failed---error code:0 x490. Once I turned it off and turned it back on. Windows was loading and then the Startup repair came up. PLEASE HELP---what can I do?
 

A:Boot Configuration Is Corrupt

Do you have impaired vision?
 

1 more replies
Answer Match 52.92%

My laptop is a Sony Vaio Z series. It is 4 years old now and out ofwarranty. It has a solid state hard drive, and runs Windows 7 Pro. Also Windows7 came preinstalled on the computer so I don’t have a disk to reinstall. I also don't want to do something that will erase my hard drive because my back up copy is about a year old.

Ican turn on the laptop, but it will not boot up. It just keeps going incircles, trying to start up, running disk checks, and doing startup repair.Every time I turn it on I get a screen, I don’t know what it means, but I haveattached a photo of it. Also, when it runs startup repair itshows a root cause of “Boot configuration is corrupt”. I’m trying to figure outif this is a Windows 7 software error, or a hardware failure causing a softwareerror.

Please look at the attached photo and help me figure out what is wrong. Any suggestions would be greatly appreciated.
 

A:Boot configuration is corrupt

Seems to be an issue with your RAID that you have set up on the machine. It seems others have run into that same issue here. See if you can reset the error on the drive. If you're able to boot into your machine from there go to the Intel website and see if there's an update to the Intel Rapid Storage Technology.
 

1 more replies
Answer Match 52.92%

hi friends,
i guess this might have been posted b4 on this forum,
i need a quickfix for it, i m desperate hence m posting this thread:
i have a dell inspiron 14 with windows 7
i tried to resize the c partition using partition magic which backfired.
i m left with a system which boots halfway and starts the startup repair which isnt successful.

root cause found:
--------------------
boot configuration is corrupt.
repair actionartition table repair.
result:Failed error code=0x490
time......

i have tried chkdsk with all options.
pls help me.
ASAP

thanq

A:boot configuration is corrupt.

Hello Appy, and welcome to Seven Forums.

You might see if you can repair it using this.

MBR - Restore Windows 7 Master Boot Record

Hope this helps,
Shawn

7 more replies
Answer Match 52.92%

hey
well the other day i turned on my laptop and it came up with start windows normaly or open windows repair enviroment so i clicked normal and repair enviroment came up anyway i just laughed thinking it was a bug and reset second time same thing happend i was like ok ? so i scanned with startup scanner on repair enviroment to find out

root cause found
-------------------------

boot configuration is corrupt

repair actionartition table repair
result: failed. error code =0x490

so what do i do someone help me please as i dont know to much about computers im about intermediate
 

A:boot configuration is corrupt

Do you have any installation media for Vista?
 

3 more replies
Answer Match 52.92%

Hi Guys,

Setup a test PC at work the other for Windows 7 32 Bit and Windows 7 64 Bit (dual boot). Set the dual boot up with EasyBCD. It was working fine until about 20 minutes ago.

I have tried the automatic startup repair but it does not fix the problem. I have also gone through Bootsect.exe and Bootrec.exe commands and they have succesfully written new MBR's and Bootsectors yet the PC still restarts. I have had to /force the previous commands to run.

I have also tried Chkdsk /r but for some reason it just runs through very quickly and finds no errors.

Any ideas as the PC's also have the virtual XP setup.

Thanks

Chris

A:Boot Configuration is Corrupt

If you can get to a command prompt, try running:

Drive:\boot\Bootsect.exe /NT60 All

I'm not 100% sure that this is the correct commmand for Windows 7 but it used to work for Vista with the same problem. If somebody could please confirm that this command is still good?

Tom

6 more replies
Answer Match 52.92%

As it happens there are a few AV vendors who are less than impressed with "independent AV Tests". The lists that are published influence buying decisions, but quite a few vendors believe they don't reflect product capability.http://www.theregister.co.uk/2007/08/09/anti_virus_testing/

A:Is Av Product Testing Corrupt?

Well, leave it upto the companies to make their own products look better LOL

Agreed, there should be standards, and seeing as computer security is a growing business, i wouldn't be surprised if there was an internet security commission soon

1 more replies
Answer Match 52.92%

Hiya

The Microsoft Platform Support Reporting Utility facilitates the gathering of critical system and logging information used in troubleshooting support issues. The reporting tool DOES NOT make any registry changes or modifications to the operating system. There are 6 specialty versions, one for each of the following support scenario categories: Alliance, Directory Services (not for Windows NT 4.0), Networking, Clustering, Software Update Services, and Base/Setup/Storage/Print/Performance. Each version gathers some of the same basic information but there are specific reports unique to each of the support scenario categories. Please read the readme.txt files for more details about each version
System Requirements
Supported Operating Systems: Windows 2000, Windows NT, Windows XP

Please view the readme.txt for specifics.
http://www.microsoft.com/downloads/...7c-7ca5-408f-88b7-f9c79b7306c0&DisplayLang=en

Regards

eddie
 

A:Microsoft Product Support's Customer Configuration Capture Tools: May 13

Alas...

Yet ANOTHER way for Micro$oft to grab your personal information!
 

1 more replies
Answer Match 52.5%

Computer: Dell Inspiron 1525, 320 GB HD with about 2 GB of free space left, 4 MB memory, running Vista Home Premium 32-Bit, SP1, updates current. Just lately, booting from off, Windows will not load, but instead gives me a \Boot\BCD error (0xc00000f)--an error occurred while attempting to read the boot configuration data. I have repaired this error with my Dell-supplied OS disc repeatedly, and each time I turn off the computer it has the same error at startup. I have read that I may have to rebuild the BCD, but I don't know how to do that. Before I check with Dell, who I suspect will just tell me to reload Windows, I need to know how approach fixing my boot configuration data. The computer has had no new software installations, just routine Windows and Trend Micro Internet Security updates, I checked the disc for errors, and a few files were missing or incorrect, and defragmentation has also been performed routinely. Dell PC checkup finds no issues. How should I proceed?

A:Boot\BCD error reading boot configuration data when starting from cold boot

Try this hard drive diagnostic procedure: http://usasma.vox.com/library/post/b...agnostics.html

Repeated errors on a hard drive usually indicate an impending failure. I'd backup your stuff as soon as possible.

5 more replies
Answer Match 52.5%

I allow my computer to remain 'on' at all times.

Yesterday, after using it early in the morning, when I returned to use it later in the day, I was unable to get it out of the 'sleep' mode.

Since I don't have a reboot button on my computer, I had to remove the cord from the rear of the compter to shut it down.

After waiting a minute or so, I replugged the cord and turned on the computer.

I received the following message...

User Environment:

"Windows cannot find the user's profile but has logged you on with the default profile for the system."

The following message then appeared before the computer was completely rebooted and ready for use:

"The configuration registry data base is corrupt."

However, I was able to 'get online'......

I also learned this:

After using my computer, if I returned to it for use within 15 minutes or so, I was able to 'arouse it from sleep' with no trouble. Yet, if I allowed longer periods of time to elapse between uses, I could not get it out of the 'sleep' mode. I had to remove the power cord from the back of the computer.

I permitted the computer to remain 'on' over night (last night). This morning I was unable to get it out of the 'sleep' mode. Again, I had to shut it down by removing the power cord from the back of the computer.

When I repluged the computer and turned it on, I received the following message:

"Loading PBR for descri... Read more

A:configuration registry database is corrupt

Try doing a System Restore to a time prior to the problems. That should fix your user profile. As far as the Standby problem goes, see if this site helps http://www.kellys-korner-xp.com/xp_standby.htm.
 

1 more replies
Answer Match 52.5%

Recently I tried to apply a static ip-adress (ipv4) in vista home premium. After reopening the properties of the connection, it looked like they were reset to default. When I looked in cmd using ipconfig /all however, the settings semed te be applyed. Since the ipadress actually IS specified I do no longer have ip issues, but the bug annoys me like hell. This is a clean (but perhaps to fast) recovery of vista, so there would not be any other veriables.

So, in short, my networkconnectionproporties do not seem to load in the normall properties window. I have tried reseting like every setting there is, I used netsh to wipe all clean en tryed sfc /scanall, no succes. Therefore I believe there must be some corrupt files (dlls?). What dlls are responsible for loading the propperties (for instance the ip settings), if ik knew that, I could borrow them from someone else...

A:corrupt network configuration files?

I did a reinstall couple a days ago... I guess my registry was the problem after all... there were some other issues... in the end they killed the system so I had no choice. It is much more stable now: the registry was not right installed last time because of shutdown to urly in the install process. At least that is what I think...

EOT for me, but perhaps there are other users with the same problem?

1 more replies
Answer Match 52.5%

Windows 10 updates including KB3124262 fail when accompanied by updates to AMD ATI Radeon HD 4300/4500 and HP w2338h monitor updates. I have the home edition and I have seen other threads indicating there is no way to selectively update with that version. The KB3124262 update is apparently successful, but the latter 2 fail because of the database corruption and all updates are removed. This has been occurring nightly and if I leave my computer on overnight(which is my normal procedure), I cannot 'wakeup' the monitor and have to force a shutdown and reboot when installed updates are removed and it is like groundhog day the next day. I bought a product Reimage that is advertised to fix this issue, but I could find nothing changed after I ran it. Does anyone have a solution?

More replies
Answer Match 52.5%

Hey there,

I'm running XP Home SP2 and the other day I got the following error while Windows was loading:

Windows cannot load the user's profile but has logged you on with the default profile for the system.

DETAIL - The configuration registry database is corrupt.​
The error message would count down from 30 seconds and then proceed to loading windows. However the task bar won't work properly; Pressing the windows key would open/close the Start menu, and it stays blank not showing any programs that are running [e.g. MS Word] Things like drag and drop don't work when I try to move icons across the Desktop.

So far I've tried to use the System Restore to go back to when it worked, however I get this message in both Safe Mode and Normal Mode:

System Restore is not able to protect your computer. Please restart your computer, and then run System Restore again.

I've also tried booting up in safe mode and deleting the ntuser.dat for the corrupt User Profile. However this didn't help to fix it so I'd tried restoring the file but it won't move from the Recycle Bin, not even by copy and paste. I've gone into Control Panel and tried to create a new User Profile, so I could just copy all my files from the corrupt profile into the new one. However the User Accounts window just appears as blank, I've included a screen shot below:

Is there any other I can go about making a new Profile, or even another method I can do... Read more

More replies
Answer Match 52.5%

When I log on to windows I get the message that Windows cannot log in the user, and has to log in the default user profile. Then I get a message that the "Configuration Registry Database is corrupt".

There seems to be a problem with the permissions because i am unalbe to load Flashplayer now
 

More replies
Answer Match 52.08%

Just started using a new workstation with Office 2010 installed by OEM. Everything worked fine for a few days, and then every time i attempt to open a Word file or Excel file i get the MS Office dialog box that states "please wait while windows configures Microsoft Office 2010". The dialog box stays visible for 30-45 seconds and then the program opens and works fine.

Ran a repair, four times, didn't fix it.

All of my research leads me to a solution of uninstalling and re-installing. I'm not buying that if everything worked fine for several days, that a bad install will make the program stop functioning properly.

I also noticed, while visiting help within outlook, that the product was still a trial version and not currently activated. I have entered the activation code numerous times with no luck.

Any suggestions? This is becoming extremely inefficient.

A:Office 2010 runs product configuration when opening Word and Excel

Right click the Word or Excel icon and select Run as administrator.
This should allow the proper configuration to be written to the system and you should not have to do it again.

5 more replies
Answer Match 51.66%

Hello sir,
this is moksha, ihave a problem i.e.,when i start my computer is showing the msg of user environment -the configuration registry database is corrupt and the windows cannot load the users profile but has logged on wih a temporary profile...
i can't understand what it is meant by and what to do? please ,send me the reply as soon as possible.
thanking you,
your's faithfully,
moksha.
 

A:Solved: The configuration registry database is corrupt

Your user profile is part of your user account, it is damaged, so windows loads a temporary profile for that user account, so it can l;oad the desktop and make the PC somewhat useable.

If it is XP home, boot the PC into safe mode, then go to Control Panel>Users

Create a new user account and give it administrator priveledges. This needs to be done before doing anything else, it is important.

Once the new account is created, restart the PC and log into the new account, once it logs in and creates the new user profile and loads the desktop (may take some time) restart the PC in "Safe mode with comand prompt"

Once safe mode is loaded, there will be a black command prompt open, type the following red text into the cmd window and hit enter key, this will start the system restore process, pick a date Before the problem started hopefully this will repair the corrupt user account.

%systemroot%\system32\restore\rstrui.exe

Once this restore process is done, restart the PC, log into the old user account, see if will load. If it is good now, you are done.

.
 

1 more replies
Answer Match 51.66%

We are getting the above error randomly on some of the laptops we have deployed. The error comes right after you boot or when the windows 7 is left running. There are no special software running. The error in details is below.
"The boot configuration Data (BCD) settings for the following boot application have changed since Bitlocker was enabled
boot appplication: \windows\system32\winload.exe
change settings: 0x26000090
You must supply a bitlocker recovery key to start this system.
Confirm that the changes to the BCD settings are trusted.

If the changes are trusted then suspend and resume bitlocker. This will reset bitlocker to use the new BCD settings.
Otherwise restore the original BCD settings"
 
Can anyone please explain on how to correct this error. As before this is happening on few of the machines and we are seeing more as we go. Any tips would be nice...Thanks

More replies
Answer Match 51.24%

Hi,

I am unable to install the drivers for my NIC's getting the error 'Invalid data as shown in the images below'.

It has previously been working fine on all adapters but I needed to uninstall the network cards as HyperV was throwing up an error when creating virtual switches which may have caused this?

PS C:\Users\JGAdmin> get-netadapter
Name InterfaceDescription ifIndex Status MacAddress LinkSpeed
---- -------------------- ------- ------ ---------- ---------
Ethernet 40 Intel(R) PRO/1000 PT Dual Port Netwo... 117 Not Present 0 bps
Ethernet 39 Broadcom BCM5709C NetXtreme II Gig...#2 132 Not Present 0 bps
Ethernet 38 Intel(R) PRO/1000 PT Dual Port Net...#2 131 Not Present 0 bps
Ethernet 37 Broadcom BCM5709C NetXtreme II Gi...#50 130 00-26-55-1A-A8-4A 0 bps
Ethernet 34 Intel(R) PRO/1000 PT Dual Port Net...#3 127 00-1F-29-56-C2-51 0 bps
Ethernet 33 Intel(R) PRO/1000 PT Dual Port Net...#4 126 00-1F-29-56-C2-50 0 bps
vEthernet (VLAN3 (Desk... Hyper-V Virtual Ethernet Adapter #3 71 Not Present 00-1F-29-56-C2-51 0 bps
vEthernet (VLAN2 (Serv... Hyper-V Virtual Ethernet Adapter #2 64 Up ... Read more

A:Unable to install NIC's - Invalid data error

It helps to know if you are using some kind of Virtual Machine software.

10 more replies
Answer Match 50.82%

I am getting the : "Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM" error message and have tried to initiate the Recovery Consule. I have the XP CD to reboot from disc and have followed the steps, hit "R" for repair, but when it asks which installation I want to use I can't get any farther. There is only one option showing "1: C:\WINDOWS" and when I hit "1" and Enter, all I get is another C:\WINDOWS prompt - it doesn't go to the next step of asking for the password or allowing me to start the recovery process. I've never tried any of this before so I'm not sure what step or action I may be leaving out???
 

A:system32\configuration\system corrupt or missing - start up problem

6 more replies
Answer Match 50.4%

I am trying to install the drivers for a HP PSC 1610 All-In-One. When step 3 of 4 is reached during install the error message "The copy functions cannot be used" appears. This seems to indicate that there is a problem copying files from the CD, however I am installing form hard drive, having copied the installer files from the CD. I'm not sure what to do now.
 

More replies
Answer Match 50.4%

hi,

Can anyone explain met how to burn a 750 mb data to a 800 mb cdr with Nero 6 ?


Thx !
 

A:how to burn a 750 mb data to a 800 mb cdr with Nero 6

First, make sure your burner supports overburning and CD sizes up to 800MB.

Enable overburning in Nero setup and set the limit to 99 minutes.

Burn away.
 

11 more replies
Answer Match 50.4%

i dont know wat the problem is . i am posting the error log from nero .

it also shows error message saying scsi command aborted . i reinstalled nero and wanted 2 copies of a cd . the 1st one was burned sucessfully , the second one failed

jains

1a20-0100-0000-1222-b3b5-1462

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:36:00 PM
ahead WinASPI: File 'E:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 10:05:32 PM
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19
(Nero Express)
Recorder: <HL-DT-ST CD-RW GCE-8525B>Version: 1.03 - HA 1 TA 0 - 6.6.0.19
Adapter driver: <> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG DVD-ROM SD-616Q >Version: F403 - HA 0 TA 1 - 6.6.0.19
Adapter driver: <nvidesm> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A 3.06 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-STCD-RW GCE-8525B 1.03 nvidesm Port 0 ID 0 DMA: Off
CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q F403 nvidesm Port 0 ID 1 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616Q H: CDRom1
HL-DT-ST CD-RW GCE-8525B G: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 223MB (228848kB)
Free physical memory: 57MB (58552kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type:... Read more

A:nero not burining data,mp3 cd

15 more replies
Answer Match 50.4%

Hello,
I don't know if this new version of nero has some kind of a built in compressor, but every time I try to burn a data file that is 414 MB in size, when I move it to the new compilation window it turns into a file that is 395 MB in size. What's the deal? I hav not tried yet to actually burn the file to see if it works as it should because I'm down to my last 2 disks and am prcastinating going to the store to get more. Anyone have any idea what might be happening?? Thanks in advance!
 

A:Burning Data in Nero 6.0??

Just tried it and yes there is a small amount of compression. I have burned many data, mp3, cd, and bootable cds with Nero6. It has never given me any problems at all. I would not worry; go ahead and burn your disk
 

3 more replies
Answer Match 50.4%

This is what I get when I click the Norton Icon, and Norton does not open up. Any suggestions, please?

Thanks!,
Thee
 

More replies
Answer Match 49.98%

My computer recently crashed; I didn't pay attention to the first message because, like most people, I'm constantly getting an error message of some type so I didn't pay much attention to this one - until the screen requested the installation CD to be run. When I did that, setup began, running through the initial processes until the "installing windows" segment - when I received the following message:

Fatal Error: An error has been encountered that prevents setup from continuing. Setup failed to install the product catalogs. This is a fatal error. The setup log files should contain more information. Press OK to view the setup log file.

Pressing OK, I read:
Error: The signature for Windows XP Home Edition upgrade is invalid. The error code is fffffdda. The system cannot find message text for message number 0xfffffdda in the message file for syssetup.dll.

Fatal Error: Setup failed to install the product catalogs. This is a fatal error. The setup log files should contain more information.

Error: (same as above)
Fatal Error: (same as above)

Fatal Error: One of the components that Windows needs to continue setup could not be installed. The operation was cancelled by the user.
Fatal Error: (same as immediately above)

The error and fatal error messages then return to the initial two messages listed above - repeated several times.

Pressing OK restarts the system and the process happens all over again. I do have a valid copy of WinNT which was preinsta... Read more

A:Fatal Error message: "failed to install product catalogs" - complete system shutdown

9 more replies
Answer Match 49.98%

I uninstalled trial version of Nero 8 because it would spam error message whenever I try to do anything, now it still doing it when I open up Windows Movie Maker and Try to import a video!

I can't burn anything now!

I also tried downloading the missing file, extracted it from the .rar and moved it to the windows directory folder, rebooted comp, still same problem! Please help!
 

A:Nero error even after uninstalling Nero!

7 more replies
Answer Match 49.98%

Hi guys. I recently burned some files onto a few CD/RW discs for transferring from one PC to another, using Nero. Later I tried to use the discs again for more data. 1st I got the "disc is full do you want to erase existing data" message. Clicked yes, Nero appeared to erase stuff, but whenever I try to use any of the discs for fresh stuff now, I keep getting the damn "disc is full" message even though I thought I'd deleted the stuff. CD/RW drive is an old one - Not a - or + type. Any ideas please?

Regards, Nick (UK)

A:Nero won't erase existing data on a CD

Have you tried using another CD burning program?

8 more replies
Answer Match 49.98%

I am using Nero BackItUp 2.0.0.0 (Nero Ultra 7) and have been receiving "data verification failed" and "Sector **** on disc has different content to source" errors recently. On the same PC , I got the errors using two different burners, with 2 different brands of media.

I used Shadow Copy for the burn, the burn process completes without error,(i.e. - the error only occurs during verification), and I have burned to the DVD/RW many times before without incident.

I didn't get data verification errors before, so I am wondering why I might be getting them now. Could someone tell me what, exactly, "Sector **** on disc has different content to source" means, as well help me solve this problem. I ran the ScanDisc in Nero CD-DVD Speed and both DVDs had 100% good sectors.
I have also attached the Nero log from the backup attempt

Thanks
 

More replies
Answer Match 49.98%

I make a DVD video from Nero Vision Express.

An use Nero Burn Rom to burn the DVD.

When I use data verification I get errors quite often.


Is it that poor video quality files will cause this ?
Is there anything to be concerned about ?


Because the DVD videos plays ok on my DVD player.


Thanks

A:Nero Burn Rom- data verification

Always use name brand DVD blanks (Sony, TDK, Verbatim etc) and not generic or no name brands. Always burn at the slowest possible speed for the blank media. Make sure there are no other processes going on in the background during the burning phase (eg) Screen Saver, other applications, surfing internet etc. You can go to the DVD burner's manufacturers support page and download the latest firmware which will allow you to use a wider variety of blank discs.
A burn that doesn't pass verification, even if it plays on your player, may not play on every player.

12 more replies
Answer Match 49.98%

I am using Nero BackItUp 2.0.0.0 (Nero Ultra 7) and have been receiving "data verification failed" and "Sector **** on disc has different content to source" errors recently. On the same PC , I got the errors using two different burners.

I used Shadow Copy for the burn, the burn process completes without error,(i.e. - the error only occurs during verification), and I have burned to the DVD/RW many times before without incident. I didn't get data verification errors before, so I am wondering why I might be getting them now. Could someone tell me what, exactly, "Sector **** on disc has different content to source" means, as well help me solve this problem I ran the ScanDisc in Nero CD-DVD Speed and both DVDs had 100% good sectors.

If it helps, user amallen had this same problem feb 13 of '07. I was unable to access the solution however. Thanks.

I have also attached the Nero log from the backup attempt
 

More replies
Answer Match 49.98%

Hello everyone,
I tried to copy some data folders on to a 4.7GB DVD with Nero Express. I could create DVD_video which could play on DVD Players. But when I wrote data folders it failed, on all my four attempts. Tried different DVDs - Sony, Moserbear etc. My DVD writer can write data on a CD quite nicely. A Nero Log is given below. As you can see there was no data over runs. I will appreciate any help to understand the problem and to solve it. Thanks to all of you. BTW I am new to this site Regards to all.
Aprily

Please see this Log:

7K22-0018-1105-E155-59M4-84X3-****
EC06-206A-99K5-2527-940M-3227-****
9C00-E0A2-98K1-294K-06XC-MX2C-****
4C04-5032-9953-2A16-09E3-KC8M-****
EC05-E087-9964-2703-05E2-88XA-****
5C0X-205M-99M1-2435-2118-K246-****
4C0E-4009-9863-2X6M-1939-12A1-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL12 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVDRAM GSA-4167B>Version: DL12 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3808110AS atapi Port 3 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM ... Read more

A:Writing Data On Dvd With Nero 8_failure

Anybody there?!!!!!
Aprily

4 more replies
Answer Match 49.98%

I'm using Nero Express 6 to create a data disk of my My Documents folder. NE6 tells me it has successfully saved the data. I open Windows Explorer and ask it for the contents of the disk. Every file is listed. I ask Explorer to open a file, e.g. a Word Perfect file. WordPerfect appears on screen, and tells me the file I want to open is a read only file. I select YES to open it anyway. The hourglass appears, and stays. Cntrl+Alt-Delete opens the file manager which informs me that WordPerfect is no longer responding. If I ask MSWord to open a file, it too stops responding. If I ask Explorer to explore the file, it stops responding.
I worry that if my hard drive crashes, these disks will prove useless in restoring the My Documents file because the programs can't open the files. What am I doing wrong?
 

A:Nero Express 6 Data CDs unreadable

13 more replies
Answer Match 49.98%

Hi,
Im having problems burning data (mp3) disks with nero. I open it, drag/drop the files I want to burn (they are mp3 files), and click burn. 5 seconds later I get a message that says burn process failed at 24x or somthing like that. I have a copy of the nero log and will paste it below. The cd-r's Im using are Verbatim 80min, which work just fine when burning audio cd's, although Ive only burned audio cd's in media player and have yet to try nero for burning audio cd's. In nero, Ive tried both, the data disk, and mp3 disk Icons. Both resulted in the same error message. Id really like to find out whats wrong, Thank You in advance.

some of the other messages I got were: could not perform endtrack, power calibration error, could not perform fixation, burn process failed.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
(Nero Express)
Recorder: <MATSHITA DVD-RAM UJ-830S>Version: 1.00 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA DVD-RAM UJ-830S >Version: 1.00 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8032GAX atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM UJ-830S atapi Port 1 ID 0 DM... Read more

A:Nero Issues with Data Disks.

16 more replies
Answer Match 49.56%

Hello everybody,

I wouldlike to know how to enable/disable the BCD.
Can you help me please?

T.Y. in advance

antivirus is warning about the BCD is allawing non-signed drivers installation.
Would like to fix this.
Is it worth it?

A:Boot configuration data (BCD)

Being worth it or not, really depends on what you want it for, can you give any more info?

9 more replies
Answer Match 49.56%

I was on my PC, my dual boot failed, windows boot configuration data is now gone. I don't have a system install disk, don't have an order number the manufacturer needs to send me one, nothing I've tried worked. The status error is 0xc0000098. Is there a way to fix it without the install disk? Some sort of repair tool I can download? If I could even get a command prompt open I could fix it but it won't boot at all.

A:Boot configuration data gone

Downloading Repair ISO which is small size file is illegal as per Microsoft. But you can download the ISO for Windows 8.1 Enterprise Evaluation, burn it to a blank DVD and then use it to repair your system. The file size is more than 3 GB.
 
http://technet.microsoft.com/en-us/windows/hh771457.aspx
 
OR  Just ask one of your friends for their Windows 8 DVD and repair your system in a few minutes.
 
This is why you should create a repair disk the first time you boot your Windows computer.

6 more replies
Answer Match 49.56%

Hi everyone,

I am really new and not technically savvy like most of you seem to be!

I actually tried upgrading my iphone and that lead to having to upgrade itunes and that returned a side by side configuration error which I have spent hours trying to google and resolve - with no success. If anyone could help it would be greatly appreciated! I'm not sure what info you need or even where to start anymore. Thanks in advance.

A:Side by side configuration error when trying to install itunes

Hello megang,

My daughter's name is Megan Grace (MeganG) - you're not her are you?

Try running the System File Checker (SFC) - follow Option 2 of this SevenForums tutorial and attach your results (see option three to "shrink" the results) when you next post. You might have to run SFC a few times to completely resolve the SxS issues.

9 more replies
Answer Match 49.14%

I just bought the Blu-ray plug in for Nero Ultra 8. When using Nero Vision 5, I'm getting a few errors...they are unable to prepare data for recording;prepare session failed, transcode od video failed. I was using VOB files encoded with DTS...I want to use this program because it creates a menu and creates chapters...anyone else have this problem and know of a solution?? Thanks a lot!!
 

More replies
Answer Match 49.14%

im backing up my dvds with nero 6.0 and i noticed u can fit like 3 movies on one dvd-r if u burn em as data files,i did it and it plays fine on my pc,will the disc work in a standalone dvd player?i dont have 1 now,but im getting one soon so i want 2 make sure im not wasting my disks,thanks in advance.
 

A:nero and burning my dvds as data disc

Hi. I'm interested in doing the same thing. Did it work correctly??
 

2 more replies
Answer Match 49.14%

Ok first I hope im posting in the correct area. Ok im trying to back up some files using dvd data discs. Im using nero and it says on the disc information that there is 4.7 g of capacity but when I try and add the files to the disc it won't let me add more then 800 mb. I know it can do more beacuse iv done this in the past with no problems.

A:Nero Data disc problem (RESOLVED)

800mb is the limit for a CD you need to set it to DVD

2 more replies
Answer Match 49.14%

HAVE INSERTED DOZENS OF REWRITABLE AND STANDARD DVDS TO TRY AND SORT OUT MY COLLECTION OF DATA AND PHOTOGRAPHIC IMAGES STORED ON DVD, BUT MOST OF THEM GIVE ME A" DISK IS NOT RECOGNIZED" MESSAGE OR "PLEASE INSERT A DISK TO THE DRIVE.". INCORRECT FUNCTION IS ALSO DISPLAYED AS WELL AS THE CLASSIC I CAN SEE UNDER DISK PROPERTIES THAT THERE IS NO MORE ROOM AVAILABLE ON DISK=== SO IT IS NOT EMPTY. BUT THERE IS NO DISPLAY OF THE CONTENT ==EVEN WHEN USING DRAG TO DISK. I NOW SUSPECT THAT MY USE OF THE NERO SOFTWARE PROGRAM MAY BE THE CULPRIT AS I NO LONGER USE THAT SOFTWARE AND DON'T HAVE A COPY OF, CAN ANYONE RECOMMEND A FREE DOWN LOAD TO AUTOMATICALLY READ ANY DVD AND LET ME EITHER SEE OR TRANSFER THE DATA TO A MORE STABLE NEW DISK ? also WHY DO I GET SO MANY "unable to copy disk parameters wrong" MESSAGES. SOMETIMES WHEN i SUPER WIPE THE DISK OF ALL SMUDGES AND PRINTS i CAN GET SOME OF THE FILES OFF BUT ITS ANNOYING.
 

A:Has Nero caused not being able to view my DVD data on disks?

Hi

first off CAPS is bloody annoying,

it sounds to me more like your dvd unit has or is starting to fail, the lasers dont last forever.

try another dvd drive and then let us know.
 

1 more replies
Answer Match 49.14%

I'm trying to burn around 4.2 gb of photos (jpg, bmp, gif) onto data dvd, but it keeps getting stuck at about 3 or 4% each time. I've tried Sony and Maxell dvd's and I have no problem burning avi's. Please help if anyone knows what the problem could be. Thanks.
 

A:Nero 6 problem burning photos onto data DVD

Try again, and as a test, choose 'Image Recorder DVD' from the drop down instead of your drive.
 

2 more replies
Answer Match 49.14%

So I just downloaded adware delete or w.e to remove vosteran search which had bee plaguing me for a while. I delete the files it tells me to and as I restart the computer I get the "Recovery$ system files are missing error code 0xc0000034 File :\BCD. Now I've done the research and it seems I only have 3 options. Windows 8 DVD, windows 8 drive or booting it to system recovery. I don't have the flash drive OR the windows 8 disc and pressing F11 at boot up doesn't do squat... I'm really terrified. I think my computer is done for? If for some reason I manage to fix
d, the bcd, will that detele all my data? System specs: Lenovo ideapad core i5 windows 8 model name 20191. Any ideas suggestions?

A:Boot configuration data is missing

Windows 8, "Missing File: \BCD Error Code: 0xc0000034"

1 more replies
Answer Match 49.14%

I was attempting to install xp as a dual os system. After setting up my partician vista still would not let me install xp , older version error. I used a program vista bootpro or bootpro and changed my boot configuration trying to get it to allow me to install xp. Now I cant boot up my laptop. Only system info I have is toshiba, 2 years old lots of ram, How can I change my BCD back so that I can boot up vista. I tried from xp cd, safe mode, last known. I don't have the vista disk with me at the moment, Can I get it to boot up with that disk? If not how can I create a emergency boot up disk for vista?

Dean
 

A:Boot Configuration Data Changed

Hi,

I think you might have to wait until you get the Vista disk back.

That will just repair the boot configuration without any problem.

There are various boot disks HERE and the Ultimate Boot CD

but I`m not sure they would be much use.

There is a very good page HERE for dual booting XP/Vista
 

3 more replies
Answer Match 49.14%

so DEP doesn't like my skype and thus won't let it stay open. i had DEP turned off before, but then i had my computer wiped and all this and that, so i had to turn it off again. but the tutorial on here by brink for how to turn it off isn't working this time, and i get a message that says

"boot configuration data store could not be opened.
access denied."

what can i do to fix this?

A:boot configuration data could not be opened?

my boot configuration data apparently cant be accessed, so this isnt working, and for the life of me i cant find a way to get access to it. i tried looking at the comments a few times and dep closed chrome each time i tried. HELP.

1 more replies
Answer Match 49.14%

When I try to boot my Lenovo Flex 3-1580, Windows 10-64bit, I get the following BSOD:

"The Boot Configuration Data for your PC is missing or contains errors.
File: \EFI\Microsoft\Boot\BCD Error code: 0xc0000034"

I haven't been able to get it to try booting from a USB, but I did try reinstalling Windows. That failed when it told me to restart and it went back this issue.
When I tried to find solutions online, they all assumed the computer could boot, so were useless.
Any help is appreciated! Thank you!

More replies