Tech Problem Aggregator

Hard drive is recognized by BIOS, but not byWin XP installatio

Q: Hard drive is recognized by BIOS, but not byWin XP installatio

Hi every body, I am new to this forum. I have fair amount of experience with PCs, including building them. Now I have a new problem. I installed a new HDD, configured it as the Primary 'o' drive (Cable Select). No other drive. The single drive is detected by the BIOS. When I try to install Win XP, the setup loads the necessary files, but when I hit Enter to install OS, I get a message saying "No hard drive is found".

I have tried different hard drives changed the cables, tried it as Master, nothing works, same message. Would appreciate your help.

A: Hard drive is recognized by BIOS, but not byWin XP installatio

Normally this has to do with Windows not having the drivers for the controller. Usually the driver is on a floppy disk or on the CD that came with the motherboard and will need to be put on a floppy disk.
During the install you will be prompted to press F6 to install additional SCSI or RAID drivers. This is where the controller drivers will need to be installed.

Can you list your motherboard specs and we may be able to find you them.

3 more replies
Answer Match 77.7%

Hey all,
I had 3 hard drives connected to my pc with 1 IDE for booting windows and the other and the other 2(SATA and IDE) for storage. I did a reinstall of windows and now my IDE storage drive is not recognized by windows. I looked at the hard drives under computer management but it does not appear at all. It does show up in the bios though. I checked the jumper setting and even tried connecting via usb with an external enclosure. With the enclosure it just found the hardware but no drive on 2 different computers.

Recovering the information on the drive is ideal, but not necessary. That said, does anyone have any idea how to fix this? If I do not find a solution, is there any way to format the hard drive without windows? I thought about installing a different OS on another computer just to format the drive but was not sure if this would work or if there was an easier way.

Thanks in advance.
 

A:Hard Drive recognized by bios, but not windows

If you are using Vista/XP/Server 2003 or Seven, you can look in Disk Management.

Go to computer management (right-click computer then Manage)

On the left of the window, select Disk Management.

This will show not just the drives, but also the partitions on the drives.

It may be that the drive has become corrupt or is formatted in a way that Windows does not understand. Alternatively, it may just need to be assigned a drive letter.
 

1 more replies
Answer Match 77.7%

AMD Athlon 2200+ with 256MB of DDR Ram.
Biostar M7VIQ motherboard
60GB hard drive
DVD-ROM
DVD-RW

Computer has been starting erratically for awhile. Sometimes it will start., other times it fails and says "HARD DISK NOT FOUND..."

I think the hard drive it finished. With power on I do not feel that 'gyro' effect you normally feel from spinning platters in a good drive.

So I tried a brand new 80GB hard drive. After numerous reboots the BIOS finally recognized it. I was then able to install WinXP. When installation was complete, I did a few Windows updates. Now I'm getting "HARD DISK NOT FOUND..." message again.

Thinking the motherboard battery could be failing, I tried a new one. Made no difference.

I tried new IDE cables. Made no difference.

I set BIOS settings all to default settings. Made no difference. Tried optimized settings. Same thing.

I'm running out of ideas. Anyone have any idea what could be wrong?

PS: Bootup each time is EXTREMELY slow.
 

A:Solved: Hard drive not recognized by BIOS

DOH!

I'm an idiot. I removed the jumper from the new drive (not listed in jumper options) and it is seen every time by the BIOS.

Boots normal speed also...
 

1 more replies
Answer Match 77.7%

I have a Dell Optiplex GX270 that I installed a new Seagate Barracuda model

7500.10 part no. 9DJ04E-305 250 Gb hard drive in. The O/S, Windows xp,

installed but the hard drive is not recognized in the BIOS unless I install the

jumper in the master position, when this is done the computer boots to the black

screen that says "NTLDR missing". I have installed the NTLDR file in the folder I

found it in on my laptop but still get the same results. This is the only hard-drive

and I flashed the BIOS. Any help would be appreciated.
 

A:New hard-drive not recognized in bios yet loaded new OS

is the sata driver loaded?
 

4 more replies
Answer Match 76.86%

Hello! Having some serious issues, as it seems we all have. So, here's the situation. As a nerd truck driver I bought a laptop for skyping with the family and playing games. Laptop was working fine one night and the next morning I start it up and windows won't boot. Just gives me a blank screen with the infamous blinking cursor in the top left.

After searching the forums, it appears I need the Win7 install discs, which this computer did NOT come with. I may be able to get my hands on a reinstall disc, but I doubt it'll be a samsung laptop disc. I was, however, able to make a recovery disc from my wife's Dell laptop. I thought she had a reinstall disc, but we can't find it.

My current problem, and the most troubling, is that now BIOS doesn't even show the HDD. I checked the connections and they are fine, and I was able to put the SATA drive in my desktop and copied all my important data to my desktop. So I know the drive is good. Nothing is corrupted and all partitions, including the recovery partition is intact. I can't figure out why the laptop isn't showing the drive in BIOS now, though.

I've tried the recovery disc a second time, but it doesn't seem to want to boot correctly now. It worked fine when the HDD was recognized, but now it's getting to the blinking screen, then the cursor jumps to the bottom right and pixelates across the bottom of the screen like it's trying to load.

I can probably get my hands on a reinstall disc if I can download one or ask around tomorro... Read more

A:Hard Drive first not booting Windows, now not recognized in BIOS

Ok, I got the recovery disc to boot again, but still don't have the HDD in BIOS yet. Only option that works in the recovery disc is the command prompt. searching for the HDD that way, but so far, I have only found D: which has the Dirs: Boot, and Sources, and a file called bootmgr. This is along with X: which is obviously the recovery disc. So far, I can't find anything else.

9 more replies
Answer Match 76.02%

HP Pavilion zv5348rs (zv5000 series) had/has 60gb (original) hard drive in it. Running Windows XP SP-3 I want to change it out as there are bad sectors on it and it's making some strange noises

I tried replacing the HD with an HP (Seagate) 100 gb hard drive. Using the same Jumper Pin Settings as on the 60 gb

The hard drive is NOT recognized by the bios.

I can boot from cd rom, or USB but no way can I find a HD (other than the generic USB)

I put the 60gb back in and it is detected and will boot back up.

Any help appreciated.
 

A:Solved: HP Pavilion zv5348rs new hard drive not recognized by BIOS

9 more replies
Answer Match 76.02%

Recently I decided to upgrade my hard disk storage space so I bought a Maxtor DiamondMax Plus 9 160GB SATA hard disk drive. Upon installing the drive I entered the Bios and went into "Intergrated Peripherals" section and set the BIOS to recognize P-ATA + S-ATA drives. When I reboot the new Maxtor drive shows up in Windows Explorer and functions normally. Also in Windows Explorer, my CD/DVD drive appears. However when I put a cd in the drive and click on the drive in Explorer I get the message to "Insert a disc into drive F:". The drive will not read the disc. When I went into Device Manager the CD/DVD drive shows up and says that it is functioning properly. Strange.....
So, I rebooted and reset the BIOS to the setup defaults (ie. P-ATA Drive Only) and when the computer boots up now the CD/DVD drive functions normally but the Maxtor drive is now not recognized. I understandObviously the Maxtor drive is not recognized because the BIOS is set for P-ATA drive only, but why when the BIOS is set for P-ATA + S-ATA is the CD/DVD drive not recognized?

My computer specs are as follows:

Processsor: Intel Pentium4 3.2C GHz (478pin/FSB800)
Motherboard: MSI i865G ATX
Bios: AMI Bios
RAM: DDR SDRAM 1GB (512MB x 2 / PC3200)
Video:nVidia GeForce FX5700 128MB AGP
Sound: CREATIVE SoundBlaster Audigy2ZS Platinum Pro
Hard Disk1:160GB Ultra ATA HDD (7200rpm)
Hard Disk2:Maxtor DiamondMax Plus 9 160GB SATA
OS: Windows XP PRo
 

A:CD/DVD Drive not recognized in BIOS after installing SATA hard disk

No one going to take a stab at this one. Please, I need some help here. Any advice would be appreciated
 

5 more replies
Answer Match 66.78%

I just rebuilt an old system using Windows 7 Home Premium after using WinXP pro for many years. The primary hard drive is WDC 150 Mg and Win7 is installed and updated to current with SP1. I dropped a second WDC hard drive in, formatted and was going to use it for a 2nd backup unit. Both of these are sata. Both hard drives are recognized by Disk Management but when I select Computer on the start menu ONLY the primary 150 Mg drive is recognized. If I plug in an external drive, both Computer and Disk Management recognizes the external drive. How do I have Win7 recognize my backup WDC drive so I can use it.

Thank you

A:hard drive NOT recognized in computer but IS recognized in disk mgmnt.

  
Quote: Originally Posted by PERSIL


I just rebuilt an old system using Windows 7 Home Premium after using WinXP pro for many years. The primary hard drive is WDC 150 Mg and Win7 is installed and updated to current with SP1. I dropped a second WDC hard drive in, formatted and was going to use it for a 2nd backup unit. Both of these are sata. Both hard drives are recognized by Disk Management but when I select Computer on the start menu ONLY the primary 150 Mg drive is recognized. If I plug in an external drive, both Computer and Disk Management recognizes the external drive. How do I have Win7 recognize my backup WDC drive so I can use it.

Thank you


Had similarities on my pc.

Goto BIOS, there you have 4 options.

Primary Master
Secondary Master

Primary Slave
Secondary Slave

Set it as follows:

Primary Master -----> Main Boot HDD
Secondary Master -----> EMPTY

Primary Slave -----> CD/DVD RAM
Secondary Slave -----> Secondary backup HDD
Hpe it helps!

Gala

2 more replies
Answer Match 63.84%

I currently have 2 SATA hard disks connected, then 1IDE hard disk on blue IDE slot and 2 IDE cdroms on the other IDE slot. I also have two other external drives each connected to a USB port.

The problem is that the IDE hard disk is not being recognised in BIOS, when I try to switch some settings in the BIOS IDE configuration I have managed to get it recognised but then the cdroms are not recognised, how can I get them all recognised?

Another problem I have is with the external drives. If I switch them on before the computer boots up the POST will hang, so I have to leave them off until the POST ends and switch them on while windows loads so they get recognised by windows with all their sharing settings intact. Is there a way to eliminate this annoying problem?

Thanks
 

More replies
Answer Match 63%

Hi all,

I know this is similar to at least one recent thread, but different enough to post.
I am upgrading my sister's machine from a 3.2Gb WD Caviar to a 40Gb Seagate U Series 5 drive, ST348023 from memory, ATA100.
The machine is running a K62 266, not sure of the Mobo, but obviously supports the AMD chip.
From what I have been able to glean from the Seagate site, this drive should be backwards compatible with any IDE connector, but when I stick it in, with the BIOS set to auto-detect all drives, the machine halts trying to detect the Seagate drive, although it will let me Ctrl-Alt-Del and also press Del to get into CMOS setup.
I have tried it as Primary Master, and as Primary Slave, both with the other HD on the same cable, and without it in at all.
Seagate's disk tools are able to detect that it is there, even when not setup in the BIOS. Seagate's disk wizard, which is an excellent tool for installing a new drive, told me that all I had to do was set BIOS settings to auto for that drive, and all would be rosy. It looks at what drive you have, what BIOS you have, and gives you instructions to suit. The documentation tells me that if the BIOS supports LBA and Large disk types, then all should be fine - it does.

Can anyone give me any ideas on what's going on? I have installed quite a number of hard drives in the past, but never come across anything like this.

Rich
 

A:Hard Disk not being auto-recognized by BIOS

7 more replies
Answer Match 63%

Hard Drives not recognized in BIOS or MY COMPUTER

Problem: An MSI 845 M/B, Socket 478, P4,1.7Gh, Windows 2000 Pro,128K SDRAM.

Primary Master: Maxtor 30GB,7200, partitioned 10- & 20; Primary Slave is 24X CD-ROM.

Additional hard drives are never recognized in BIOS or in MY COMPUTER, nor are drives that are attached to a Maxtor Ultra ATA /100 IDE Adapter card recognized. All possible settings in the BIOS have been tried, and jumpers, power, and ribbon cables have been triple-checked.

Firewire card recognized but message says it can’t start (Code 10).
I boot up the computer: The following is a device manager listing.

DEVICE MANAGER

IDE ATA/ATAPI controllers
Intel 82801BA Ultra ATA Controller

! ! ! Primary IDE Channel ……. [ Location 7 (0) ], IRQ 14, 01F0-01f7
03f6-03f6
“This device cannot find enough free resources that it can use”.(Code 12)
“If you want to use this device you will need to disable one of the other devices on this system.”

Primary Ultra ATA Channel – is using the resources of the primary IDE Channel
! ! ! Secondary IDE Channel …. [ Location 7 ( 1), IRQ 15, 0170-0177
0376-0376
Same message as Primary IDE Channel (Code 12)
It is not using any resources because of the problem.


Secondary Ultra ATA Channel.- is using the resources of the secondary IDE channel.

In “other devices” a PCI Device gets detected. Don’t know what it is, so I disable it.
In “IEEE 1394 Bus Host Controllers there is an exclamation mark next to the
! ! ! T... Read more

A:Hard Drives not recognized in BIOS or MY COMPUTER

10 more replies
Answer Match 63%

Yesterday while watching movie on my PC it appeared as black on the screen and stopped working. After restarting the PC it was not responding as the BIOS was unable to recognize the hard disk. It creates an unusual sound while BIOS searches drives.

1. I tried by bootting the PC using another hard disk but this HD does not appear in the windows.
2. I also tried to boot using Ubuntu live CD but failed to find my HD on it.

As it is not recognized by BIOS, I cann't use data recovery software to recover the data. I'm badly in need of all data in it.

Please someone help me in this regard to recover the data.


Brand: SAMSUNG
Model: HD252HJ
Capacity : 250 GB
Interface : Serial ATA 3.0 Gbps
Buffer memory : 16MB
 

A:My Samsung Hard Disk is not being recognized by BIOS

Try the freezer trick. Place your hard drive in zip lock freezer bag to protect it from moisture and freeze it overnight (or a few hours at least). Quickly hook up the frozen hard drive and try to boot from it. If it works, be prepared to copy your important data as soon as possible before the hard drive warms up too much. This is not a permanent fix but it may work long enough to save your data.
 

3 more replies
Answer Match 63%

I have a brand new Foxconn A7GM-S 2.0 motherboad which seems to be unable to recognize my two SATA hard disks. I have ensured that the power connectors and SATA cables are snug, and have tried each pair of the six SATA slots on the motherboard. I also don't hear either hard disk powering up upon boot.

This board is a replacement for my older motherboard, which died rather suddenly. Both hard disks were connected to the old motherboard at the time of its failure, which leads me to wonder if the disks are damaged beyond repair. Do motherboard failures generally affect connected hard disks? Or is my new motherboard defective?

Specs:
CPU = AMD Athlon 64 X2 5050e
Motherboard = Foxconn A7GM-S 2.0 (BIOS version 8.00.14)
RAM = 2 x 2 GB GSkill DDR2-6400
HDD1 = Seagate Barracuda (160 GB)
HDD2 = Western Digital Caviar (80 GB)
 

A:SATA hard disk not recognized in BIOS

11 more replies
Answer Match 62.16%

The title says it all. Why is this. (Windows XP)
 

A:CD drive not recognized by bios

8 more replies
Answer Match 62.16%

So I unplugged the Drive to spot out some problem with windows not installing correctly and now the Drive isn't being show in the Bios or on boot, it has power cause it opens the tray correctly and I tried resetting the bios to defaults.

How do I fix this. And I'm in the process of reinstalling Windows so I'm limited in what things I can do.

Thanks For Reading.

A:DVD Drive not Recognized in Bios

It would seem to be a connection issue. If necessary, try a different connector. A Guy

3 more replies
Answer Match 61.74%

I have a compaq CQ60 104TU laptop, my previous harddrive crashed and i has an external 500GB hardrive lying around. So, I opened it up and took the Harddrive out and inserted into my laptop.

When I am trying to load windows into it I get the error

Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu

The Hard disk has no data, and i don't have a CD-Rom, have made my USB bootable manually using DISKPART (this method of installation has worked for me before)

I have a InsydeH2O Setup Utility
Inside the BIOS the options available to me are:-

**Main**
->System Time
->System Date
->Diagonistic Log

**Security**
->Administrator Password <clear>
->Power-On Password <clear>

**Diagonistics**
->Primary Hard Disk Self Test
->Memory Test

**System Configuration**
->language <English>
->Processor C6 states <Enabled>
->Fan always on <enabled>
->Boot Options->

**Exit**

**No other options other than this are available to me in the bios**
Note:- In the BIOS Reverting back to Defaults did not work. I have already tried that

Please could you help me repair my laptop.

A:New Hard disk recognized by Windows7 but not by BIOS, install failed

8+ hrs and lots of viewers, but no answers...

giving it a bump here

1 more replies
Answer Match 61.32%

Right, so I recently upgraded my computer. I just need to install Windows XP onto my hard drive. The problem is, in BIOS, my CD Rom isn't getting recognized. I have a IDE to SATA adapter (this one http://www.newegg.com/Product/Product.aspx?Item=N82E16812816113) to connect the CD ROM which as a old IDE connector, to the motherboards SATA ports, as it does not have any IDE ports.I also see that the LED for the adapter is on and I know that the switch is in the correct place. Please help. My motherboard is a EVGA P55V, which can be found here. http://www.compusa.com/applications/SearchTools/item-details.asp?EdpNo=6247549
 

A:Solved: CD Drive not Recognized in BIOS

7 more replies
Answer Match 60.9%

Hi everyone,

I have a Seagate ST320430A 20.4 GB ultra ata drive that will spin up but is not being recognized in either of two systems. The drive came out of a pc that was dying and I just rebuilt. I thought I had copied all the files I needed off of this drive. But now have figured out that of all the things for me to forget.... I didn't get the outlook.pst file. UGGG!!!

I've called a couple of local computer shops. The conscensus is that if it spins up but isn't recognized then the controller card on the drive is probably bad. If that is the case I'm being told that there's no hope.

1. Is it true that there's no hope if the controller card is bad?

2. What are the chances of me taking this apart and replacing the controller card from an identical drive?

3. I think I've set all the jumpers correctly for the drive. I can't remember if jumpers will prevent it from being recognized in the bios. I think I've tried all of the options though...

Thanks!
 

A:Solved: Seagate drive not recognized in bios

yes when the controller card on a hard drive goes dead then its usually comes to a dead end, personally i have never tried to rip it open and try to replace the controller card, something you could try and do if you wanted to try it, but wouldnt get your hopes up. as far as the jumpers go it doesnt matter where you put it on the hard drive it would show up in the system somewhere you would just have some conflicts going on that would let you know that you need to redo your settings on your drives.
 

3 more replies
Answer Match 60.9%

BIOS does not recognize the FDD. Have tried 4 different drives and different cables, no go. Could the mainboard be the culprit?

Any words of wisdom?

Appreciate your help.

 

A:Floppy Disk Drive not recognized in BIOS?

This one takes the cake. Was waiting for it to auto-detect!!! Christmas is also coming.

The old brain is fried, been looking at this thing too long.

 

2 more replies
Answer Match 60.9%

I noticed that sometime after I installed windows 7 that my dvd optical drive was not showing up. I have done a lot of research on the matter and have yet to find a working solution. I checked my BIOS and the drive is not listed there, but I'm pretty sure it is properly connected. I have an HP Pavillion dv6000, so the drive just plugs into the slot directed connected to the motherboard, and can be removed by unscrewing a single screw. When the laptop is on I am able to open the drive, and it lights up, so I know it is getting power... I have tried everything under the sun to fix the problem - checking/cleaning the connection port, deleting the upperfilters value from the registry (which many people have said worked for them, however for me it only gave me an warning message in itunes telling me the registry files for burning/importing cd's was missing), reinstalling gear drivers, and running the microsoft fixit programs (they just tell me they can't find the drive or that it isn't there - thanks microsoft...). Nothing has worked, and it's driving me crazy not being able to use my dvd drive. Has anyone had this problem to the same degree as me?/found a solution to it?

A:DVD Optical Drive Not Recognized in Windows or BIOS

Of the BIOS cannot see it, no software fix will help including other drivers. It is probably a connection problem. If the disk works, then the mobo controller is OK because the optical drive uses the same controller in the chipset.

9 more replies
Answer Match 60.9%

I have a Dell Optiplex GX280 SD. When I first purchased the PC it came with a CD-ROM drive and Windows XP Professional pre-installed. A few months after purchasing the computer I decided to upgrade my CD-ROM to a DVD-RW/CD-RW. I purchased a brand new DVD-RW/CD-RW drive and replaced my CD-ROM with it. Everything worked well, I was able to play CD's, burn movies, etc. A month later I decided to upgrade my Windows XP with Windows Vista Home Premium. I purchased the DVD and installed it with no problems. My DVD-RW drive worked fine, even after installing Windows Vista.

Then, a week or two later I tried playing a CD; I opened my DVD-RW/CD-RW tray, placed the CD inside, then closed it. Usually when I place a CD into my DVD-RW/CD-RW drive and close it a window pops up asking me what I want to do, however, this time it didn't. I went to My Computer and noticed that there was no DVD drive icon under Devices and Removable Storage. I tried restarting my computer in hope that it would reappear but it didn't. I went to Microsoft's website to try and figure out what was the problem. One option was to go to Registry Editor/HKEY_LOCAL_MACHINES/SYSTEM/CurrentControlSet/Class/{4D36E965-E325-11CE-BFC1-08002BE10318} and delete both upper filter and lower filter; however, I was only able to delete upper filter because there was no lower filter. I restarted my computer but unfortunately it didn't work.

So, I restarted my computer and went to Setup then to Boot seque... Read more

A:DVD drive not being recognized by neither BIOS nor OS (Windows Vista)

Hi lechevarria89,

Is the drive SATA or IDE? You've established that it is getting power to the driver, but not the information. And since it is not showing in BIOS, but was previously. We start looking at the physical information connector. SATA cables quite often fail, plus make sure the cable isn't bent at a 90 degree angle, with SATA the rule of thumb is "Mess is good!"

Let me know the update
 

22 more replies
Answer Match 60.06%

Hello,

I have a Dell Inspiron 1520 laptop. I have an image of the entire hard drive that I created when I first got the computer (using Acronis TrueImage), and I'd like to restore that image, returning the laptop back to that fresh, clean original state. I've done this two or three times before and it worked great each time.

But now there's a problem. Normally I would connect to the laptop a USB storage/backup drive that has the disk image, boot the laptop from a Rescue Media CD created by Acronis, then restore that disk image from the back-up drive onto the laptop's HDD.

When I tried it this time round, the laptop's HDD was not listed in TrueImage at all. I created a new rescue media disk, tried it again, and got the same result.

I then took the HDD out of the laptop, connected it to an adapter kit that let's you power up and plug in the drive via a USB port and external power supply, and tried the same procedure using my desktop to run the operation. Same result. The drive was not detected by Acronis.

The drive does not seem to spin up at all when it is connected.

** Keep in mind the drive still works when installed in the laptop -- it boots into Windows XP etc. **

When I plug the drive into my desktop, the drive does not show up in Disk Management (Start | Right-click My Computer | Manage | Disk Management). It doesn't show up in either of the two right-side windows. (so there's no way I know of to format it or d... Read more

A:Primary hard drive boots in laptop but isn't recognized when used as external drive

It's a power issue. Had the same issue taking a 2.5" laptop hdd and attempting to hook up w/ a passive usb sata hdd cable. my recommendation is to use a powered usb sata cable. like this one: http://www.newegg.com/Product/Product.aspx?Item=N82E16812119475 having proper power will allow the USB bus to detect and power the hdd correctly. Hope this helps, take care!
 

3 more replies
Answer Match 60.06%

I have the T110, I can create the recovery discs in Windows but when I restart the computer and press F12 it shows no CD/DVD drive in the BIOS.

So I cannot restore from or boot from the external CD/DVD drive.

Help!

A:Satellite T110 - USB powered CD/DVD drive not recognized in BIOS

Hey,

I don?t have the notebook in front of me but check the BIOS if you can find an option called ?USB legacy support?. If yes you have to enable this feature that your notebook can recognize the external drive.

Can you boot from an USB stick? I mean you can also create the recovery files on an USB stick so this would be also an option to restore factory settings.

2 more replies
Answer Match 60.06%

I own a Toshiba R630 and recently replaced the original disk with a Crucial SSD one, with a big performance improvement. I've been using the old Hitachi drive in an external case through the eSATA port without any problem, but this setup requires both the combo eSata/USB port and a second USB just for power, so I purchased a 9.5 mm caddy to put the disk on the DVD location.

Today I went ahead. Physically all went good (apart from the fact that I had to take off the back cover, more than 25 screws; I took the opportunity to clean the fan) but when I turned the computer on and accessed the BIOS the Hitachi disk is recognized as an optical drive!

You may see an image here:

After that I could enter Windows 7 (64), Disk Management recognizes it as a disk, but can't initialize it. After rebooting the computer I can't enter Windows any more, as it goes directly to recover mode.

Any help would be appreciated! Is there any way to make the BIOS recognize the second drive as an hard disk?

Carlos


+Message was edited: faulty link has been removed+

A:Satellite R630 - second HDD recognized as optical drive in BIOS

First of all I would recommend you to check the boot device order.
Probably the ODD has been set first boot device and notebook tries to boot from the HDD connected to ODD controller.
If this will not work, remove the old Hitachi HDD, reset the BIOS to default and try to boot once again.

To be honest I?m not quite sure if the BIOS would support such configuration. I mean not all notebooks can be upgraded with an 2nd HDD and in many cases the BIOS would not support the HDD installed in the ODD bay? therefore this configuration may cause some problems.

1 more replies
Answer Match 59.22%

I'm working on a friends Dell Inspiron 8000 which came with a 20GB Hitachi IDE hard drive which now sounds like loose coins when it runs. I installed a new Fujitsu 120GB PATA drive. I've been able to reload Windows and make it boot from CD using the Windows disk, but, I can't get the BIOS to recognize the drive and therefor boot from the new hard drive.

Are the new "PATA" drives not compatible with older machines that came with IDE drives?
Sig
 

A:Solved: Newly installed PATA drive not recognized in BIOS

16 more replies
Answer Match 59.22%

I am posting here as well as in the hard drives part...

My question is: I have XP Pro on my machine that once recognized the external firewire hard drive attached to it (showed up as drive letter in "My
Computer"). Now, the passthru works fine on the ext. hard drive feeding
another firewire device, but I can not get the pc to show a drive letter for
the ext. drive anymore. The ext. drive shows up fine on another pc w/ xp
pro. What .dll or file is missing or has been corrupted to cause this? I
also have a client that is experiencing the similar problem with his new pc
w/xp pro and a USB thumb drive, and thought these 2 issues may be similar in
nature.

Thanks in advance,
Dave S. A+ certified

A:Ext. hard drive is recognized, but no drive letter assigned in XP Pro

Hello... any ideas??? anyone???

2 more replies
Answer Match 59.22%

I used to have a cd rom and a cd burner master/slaved to my motherboard. a while ago that ide slot died, so i master/slaved my hard drive and my burner to the working ide slot.

a few days ago the computer crashed. i dont remember the exacy error but it no longer recognized the hard drive. when i tried to restart it brought me to the strike f1 to reboot/strike f2 for options screen. i assumed this meant that the hard drive was toast, but upon further inspection when trying to change the boot sequence in the BIOS it recognized the floppy drive but the the hard drive nor the cd drive were recognized. this lead me to believe that the second ide slot had now gone bad as well.

my brother has another dell dimension so i opened his up, removed his hard drive and replaced it with the questionable hard drive. i booted it and got Boot Failure : System Halted.

is this enough evidence of a hard drive failure? ive come to terms with it being time for a new computer but im still hoping everything on the hard drive can be recovered.

any opinions/suggestions?
 

A:Dell Dimension Hard Drive and CD Drive not recognized

Did you check that the Master/Slave jumpers were set correctly?
Moving a HD to another PC normally does NOT work, unless both PCs are identical in hardware. Put your 'old' HD as a slave in your brother's PC, boot up and see if you can access your old drive. Save whatever you can and burn onto CD/DVD.
Then go buy another PC, anything but Dell or eMachines!
Or better, if you have the know-how, build your own from components.
 

2 more replies
Answer Match 59.22%

I have a Dell Dimension MCE 8400 that I ordered with a single drive. In retrospect I should have ordered it with 2 drives and without MCE but that is another discussion. I am wanting to install a new OEM WD Cavier SATA 160 with dual boot operating systems on the same drive but partitioned, XP Pro and MCE. I have installed the WD drive as the second drive (in position 1) and made a partition of 40 GB. The drive is seen by the system. I reboot the system and go into setup, disable the Maxtor SATA drive (one delivered with system and in position 0) change the boot order so it boots from CD, save the changes. I boot the system with the Win XP Pro CD, and in the FDD I have WD SATA drivers. The system boots, I hit F6 and it looks as though it is reading the SATA controller drivers. Needless to say the system doesn't recognize that a hard drive is present. Please help!!!!! If anyone has any ideas or suggestions it would be greatly appreciated.
 

More replies
Answer Match 58.8%

Hopefully someone has some ideas for me on this...I picked up an old system for my wife to use (Compaq Deskpro, P2, 350 mzh). It only had a 3 GB hard drive so I decided to switch it with a 30 GB drive I had. When I made the switch, the system would not recognize the drive. After the POST, it would default to a flashing cursor. I tried to reinstall the original 3 GB drive and it did the same thing. I tried setting the jumper to Master, and to Cable Select. The IDE cable and controller seem to be functioning, since installing each drive promted the system to recognize a new drive size. Nothing in the BIOS seems unusual. I tried wiping the 3 GB drive clean and reinstalling W2k from the boot disks. The install completes, then when it does its reboot, the flashing cursor returns. I don't think the CMOS battery is at fault, and I know the system did boot at one point since I booted it up before I bought it. It seems as though it starts to recognize the drive and then hangs up. I do not receive any error messages. Anyone have any ideas on this? Thanks!
 

A:Hard drive not recognized

change the cmos battery
try another eide cable
 

2 more replies
Answer Match 58.8%

I have been running 2 hard drives for about a year.All the sudden my second Hard drive that contains all my pictures from the last eight years can not be found!!! Can anyone help???? Is there some way to get the Data off there?
 

A:Hard Drive not Recognized

7 more replies
Answer Match 58.8%

Hey guys, I have a problem; I'm repairing a gateway emachines T6420 with xp, media center pc. When it tries to boot it comes up with disk boot failure, insert boot disk (no change after inserting disk)! I went into bios and of course it's not recognizing any drives, not even the cd/dvd. I replaced the hard drive and cd; the connections are good. Is ther anything I can check other than what I've already done; any suggestions at all!! Please help! Is there a setting in bios I should be looking at? Any help would be deeply appreciated
 

A:Hard drive not recognized

11 more replies
Answer Match 58.8%

My external WD hard drive was dropped...
My computer doesn't recognize it at all...not listed anywhere
The lights are on and no one is home.
I've tried CBL to see if I can retrieve the files...get an "error 27 in HD 129" . This program has been running for 24 hours.
Can the files be retrieved? By whom and at what cost?
Thanks.

A:Hard Drive Not Recognized

If you go to the website of the manufacturer of the drive you should be able to download a diagnostic tool to test the drive.

4 more replies
Answer Match 58.8%

Help....please, hopefully someone can help me. The problem is back!

I had this problem where intermittently, usually when i came out of sleep mode, the hard drive with my data would "disappear". I would have to reboot to get it back. Whenever this happened I'd get error msgs saying "windows delayed write failed, could not write to the file D:\$Mft". Well, the problem began to get more frequent and one day, I could no longer get the drive back after rebooting. It is a Seagate Barracuda 7200.9 160gb SATA. I ran the seagate tests, it passed.

So I sent the drive back on an RMA and got a new one. THe original one worked fine for 2 years. For about 2 weeks the new one worked fine but NOW its back!!!!

This time, it happened twice tonight as I was working. All of a sudden I get the delayed write error, and sure enough when i check "my computer" it is GONE. I have to reboot. I was working on editing some digital photos converting raw images, each one is about 46mb, and as the program was writing the converted file it took a LONG time to write...and then i got the error. Even when I dont get the error, it takes a very long time to write a 46mb file to the disk I tried saving the file to my c: drive and it took just seconds. Something is wrong here!

Now I dont think my original hard drive was even bad. What could be going on in my computer to make it not see the hard drive???? BTW, this drive is not full. It has about 15gb free.

I'm hoping to... Read more

A:Hard Drive Not Recognized

13 more replies
Answer Match 58.8%

My Western Digital USB hard drive was recently connected to a MAC to transfer some files. When I connected it back to my windows PC, it does not recognize the drive.

Help please!!!!

A:USB Hard Drive not recognized

  
Quote: Originally Posted by SomanS


My Western Digital USB hard drive was recently connected to a MAC to transfer some files. When I connected it back to my windows PC, it does not recognize the drive.

Help please!!!!


Is it recognized in BIOS? what format is it? Does it have a drive letter?
Ken

2 more replies
Answer Match 58.8%

when plugging in my seagate freeagent hard drive i get the message "USB device not recognized. I have been to device manager and it appears as "unknown USB device (device descriptor request failed)". I have tried uninstalling it and reinstalling, checked for new drivers/updates. no luck
any help would be much appreciated!
thanks

A:hard drive not recognized

Sounds like a bad drive. Does it work on any other computers?

2 more replies
Answer Match 58.8%

My dell dimension 4300s just stoped working and know the pc dosent recognize the hard drive or cd-drive, in bios it just says unknown.Please help

A:Hard drive not recognized

try diconnecting the power from the cd drive and see if bios recognizes just the hard drive. if both device are on the same parellel cable you might have a slave/master conflict.

2 more replies
Answer Match 58.8%

Hello all, I have a severe problem and hope someone can help me.

It started last night with my computer off and unplugged. My 160gig external drive was still plugged in and on when it was accidentally unplugged. I plugged it back in, and a minute later heard 2 clicks...i shut it off immediately.

turned it back on an hour later and the computer. no clicks, but it the drive didnt show up in "my computer". it did show up in the device manager as working properly. But when looking at volume information in properties it shows as unreadable. It also doesnt show up in disk management.

I have tried several downloaded programs and most see the drive and show it as corrupted partition. They also show the drive as far larger than it is (like 2 terrabyte) and show it as 1 head 1 sector.

I am lost as to what to try next. I hope someone can help me.

:dead:
 

A:Hard drive not recognized by xp

Welcome to TechSpot

Your unplugging corrupted the file-system of that HD.
You could try and take it out of the case, set it to slave and stick it in a PC, connect it to an IDE-cable.
Then hunt around for various Data-recovery programs. Try and D/L this one from TechSpot's DL-area: http://www.techspot.com/download201.html
 

3 more replies
Answer Match 58.8%

I have an IBM Thinkpad 760el which I am trying to reinitialize and install Windows 95 on. I purchased a Quick Recovery CD/Disk for my model from ebay thinking this looked like exactly what I wanted to do. I followed the instructions sent with the CD and everything seemed to be working OK. The final step was to reboot to reinstall Windows 95. However the computer would not boot from the hard drive (all I get is a flashing "-"). I then booted from a floppy disk to see if it would recognize the C drive and the response I get is "Invalid Drive Specification". I then turned on the computer pressing the F1 key to run a test and the hard drive tesk was OK. I have also downloaded the BIOS from the IBM website and reinstalled that, all to no avail. Any ideas on where to go from here would be appreciated
 

A:Hard Drive Not Recognized

Quick question.
Did u had a chance to format the hard drive with the "format c: /s " command?
Usualy when u want to start fresh , you first start with the format of the hard drive , then move on to the installation of the OS, in your case the recovery CD.
And since it doesn't seem to be a hardware problem , "I then turned on the computer pressing the F1 key and run a test and the hard drive was OK " indicated that it's very likely that is the problem. Hard drive not been formated.
Also, in case you have a windows 95 boot disk , might want to start the computer with that boot disk and at the a: prompt might want to type this
sys C:
That should correct any problems in the FAT , and might be able to by pass the format process.
Keep in mind thought... when u issue the format c: /s command , you will wipe out all the data on the C: drive ( as in gone from it )
HTH
 

2 more replies
Answer Match 58.8%

I bought a new hard drive and formatted it etc, then installed or tried to install windows XP home edition after the initial install
I get a message telling me windows does not recognize the drive. ??? How do I fix this
 

A:Hard drive not recognized

16 more replies
Answer Match 58.8%

Hello,

So I've recently built a new PC and I installed 4 hard drives on it.

1)256GB SSD
2)500GB HDD
3)600GB HDD
4)600GB HDD

My problem is that the 3rd HDD drive is not recognized and its displayed as "Intel Raid 0 Volume" in Device Manager (I didn't change any settings in BIOS for RAID configuration).

When I enter Disk Management I get the message:

And also in partition management its displayed as "Disk 3 Unknown 1192.34GB Not initialized - Unallocated" (the actual HDD size is 600GB)

Two things I noticed:
- In BIOS all the drives are displayed correctly
- I used a SATA to USB adapter and the drive works fine with all the data on it.

I tried running some Chkdsk tests but didn't get anywhere since the drive doesn't event have a letter assigned to begin with.

Anyone knows a possible solution?

Thank you

A:Hard drive not recognized on new PC

Assign a letter to it manually and it should work.

2 more replies
Answer Match 58.8%

When booting up my one-year-old dell laptop, I get the message

"primary hard disk 0 is not found"

I tried to boot up from the XP cd that came with my computer, but it tries to install XP rather than just boot the computer. It fails because it does not recognize the hard drive.

I was thinking that if I was able to install off the CD I could reformat the hard drive and just start over. Is there a way that could work, or will I need to buy a new hard drive for it?

This all happened this morning after I tried to restart my computer because it gave me the "blue screen"

Any help would be greatly appreciated. Thank you.
 

A:Hard Drive Not Recognized!!

15 more replies
Answer Match 58.8%

I recently purchased a new IBM 20.5 GB hard drive for my PC. I want to add it to my current hard drive. I connected to my IDE cable that holds the slave drive and then booted. The BIOS does not recognize it.(I have an Ultra ATA66 Card installed currently where the slave is connected to). What should I do? Thanks for all help.
Robert
 

A:New Hard Drive not Recognized

14 more replies
Answer Match 58.8%

I just built a system using an SSD as the main drive. Everything is humming along just fine except that a second 1Tb Seagate Hard Drive is not being recognized by the system. I had to use a Molex to Sata converter to connect it because the SATA Drive coming off the power supply only reaches the SSD and Optical.

I'm rather new at this and so................

Thanks.
 

A:Hard Drive Not Recognized

Is it detected in the BIOS? Is it detected in Device Manager as a drive? If yes then you likely just need to initialize, partition, format, and assign it a drive letter through Disk Management: http://windows.microsoft.com/en-ca/...n#create-format-hard-disk-partition=windows-7

Also, your power supply should have more than one SATA power cable. What power supply do you have?
I'd use the adapter on the optical drive and give the hard drive the SATA connector from the PSU instead.
 

1 more replies
Answer Match 58.8%

I've got a Dell Dimension 4600. I think the hard drive is failing so I took an old hard drive that I had (western digital caviar wd600) and replaced the one that came with the dell with the western digital one. I booted with the xp cd in and ran an install formatting the drive , but now when I try to boot I get a message saying

Primary Hard Disk Drive 0 not found

Anyone know what I've done wrong?

Thanks,

Matt
 

A:Hard drive not recognized

12 more replies
Answer Match 58.8%

My external hard drive (EHD) is not being recognized by several computers that run on Windows XP and XP Professional. The EHD is Western Digital Series 1 USB 2.0 (Old USB 2.0) – Model Number WD1200B05-RNN. It is just over 2 years old and is out of warranty.

I’ve done some reading online forums such as this where users have had similar problems, but I didn’t see any solutions – or, any that I understood, so I ask that if people have suggestions, to guide me through it step-by-step.

It was working a few days ago. The other day, I was doing a file search on it and it stopped responding in mid-search, so I started the search again, and it stopped responding again in mid-search. After that, the computer won’t even recognize it as a separate drive, although the bottom right of screen shows a symbol that there is an external HD plugged in. Windows XP detects that I plugged in the external hard drive and the icon “Safely remove device” appears too in the tool bar. However, I cannot see the drive in “My Computer.” I’ve tried to plug it into 2 other PCs including my laptop, and the same thing happens: it isn’t seen under “My Computer” but the icon appears on the taskbar. I’ve tried to unplug it & re-plug & restart the computer, but nothing. I’ve tried installing the driver again and restarting, to no avail.

Before I plug in the drive, I open the Control Panel, Administrative Tools, Computer Management window, but when the drive is plugged in, the Control Panel... Read more

A:hard drive not recognized

Well it certainly sounds like the drive has died.

If it helps, CompUSA is selling a Hitachi 200Gb HDD for $70 after mail-in rebates this week. Better hurry. It ends tomorrow I think.

Now as far as trying to recover data..There is one technique (which sounds really weird but works for some people). Kind of a last resort technique when all else fails and you don't want to spend big money on data recovery.

Put the old HDD in a ziplock bag and stick it in the freezer for a few hours. The cold sometimes helps the HDD work for a little bit of time. You would then take the chilled HDD to a working PC and install it as a slave so you can hopefully copy as much data as possible off it.

Good luck.
 

1 more replies
Answer Match 58.8%

Well I have a dell desktop (not sure of the exact type) and I have Windows Xp Home edition. My computer suddenly stopped working saying that my hard drives were not found. I'm at a loss here and I have no idea.

Any help is appreciated.

Thanks.

~Makk
 

A:Hard drive not recognized

Does Windows still work in any shape or form? Can you give details of what happens when you switch on - any fan or drive noises, any lights, any beeps? Anything on the screen ? If so, what does it say - exact wording please.

It will speed things up if you also tell me what model your PC is, it's age, and any other details that you can. At this moment, anything might turn out to be relevant. Do you have a floppy disc drive, do you have any original install CD for Windows, if so exactly what? From Dell likely nothing at all.....

We are looking here at failed Hard drive, power supply or motherboard, which is as wide a choice as you can get....
 

5 more replies
Answer Match 58.8%

I was posting in another thread and realized I shouldn't hijack his/her thread. I also tried looking around the forums for a resolution to my problem and either 1) can't find it or 2) probably didn't look hard enough.

Before I get into the problem, here's my HD configuration:

1 x 500GB SATA HD (2 partitions) -- Master Drive -- Windows 7 Pro 64-bit installed in one of the partitions (150GB partition)
1 x 250GB IDE HD (no partitions) -- Slave Drive -- just for file dump.

Here's my problem:

I installed Windows 7 Pro 64-bit on one of the partitions of the SATA HD. It works great and recognizes both partitions of this drive. However, I cannot "see" my IDE HD. I went through to disk management and I can see the drive there with no drive letter. I tried to assign it a drive letter via right clicking, but all options were grayed out (meaning, not clickable). I read other posts but they either have the same solution (assigning drive letter) or the problem is slightly different from mine. I've had this HD configuration before and had Windows XP Pro 64-bit on it too.

Anyways, I'm not sure what to do and I don't want to delete the files on that HD. Anyone have a solution to this problem? Thanks!

A:IDE hard drive not recognized

I should also add that the two partitions have drive letters of C: and D: (Windows installed on C: ). Also, I'm not dual-booting (as I see that question being asked in other threads).

9 more replies
Answer Match 58.8%

Hi all

I have noticed a number of requests to solve this issue, all without any real resolution. One person was lucky enough for his system to suddenly find the offending item. The operating system may identify the new drive in System Properties but not in Windows Explorer.

However, it should be noted, that any Hard Drive whether it is internal or extenal has to be prepared by the system itself, in order to be able to use that hard drive. Back in the good old days of DOS, this would have meant using the FDISK utility to prepare and setup the drive.
VERY SLOW METHOD:
If you are still in possession of a floppy drive attached to you system, then it is a simple matter of using any of the rescue disks that could have been created during the installation of the OS (you can find such disks available online as well, somewhere). Using FDISK you can access the new drive by choosing option 5 in the FDIDK menu to change to the desired Hard Drive you want to setup. Naturally enough, if you already have 2 Hard Drives on your system, and you want to install a 3rd external one, the the drive you want to work on will be drive 3. It does not matter how many partitions are on the othere drives, FDISK is only interested in the physical aspect of the drives. Once you have access, you should check to see if you need to delete any partitions already on that drive. Once you are sure you have a completely empty drive, you can then simply create a Primary Partition on that drive. It is not necessa... Read more

A:Hard Drive not Recognized

Why not just use Disk Manager and avoid the need for any additional software?
I have yet to see a salvageable disk I couldn't cure with a Linux disk and disk manager.
 

2 more replies
Answer Match 58.8%

I have WD passport 500 GB. but now it can not recognized in my computer. The light is on and there is thicking too but the drive not shown in computer and the disk management. Please help me how to recovery my data ?
 

A:Hard drive not recognized

If its not showing up anywhere and i guess you mean its ticking it sounds like the hard drive is dying or has died. you might try a usb sata/ide connector and see if you can recover anything.
 

2 more replies
Answer Match 58.8%

I'm having a problem in that my second hard drive is NOT recognized more than it IS. I have a Western Digital as my main hard drive, and a Samsung as my secondary. I have swapped out the cables, so it does not seem to be a cable problem. I have the Western Digital DataLifeguard Tools, which I'm not sure if I can get it to help, as it only wants to help with Western Digital drives. The first drive is set up as Master, the 2nd is set up as Slave, not Cable Select (when I can get it to "see" the 2nd hard drive, it cannot read the data on it if it is in Cable Select)

I'm running Windows XP Home SP2. As a side note, I did have to do a repair, but used a new disk, which upgraded from SP1 to SP2, but that was after the problem occurred.

Any suggestions?
 

A:2nd hard drive not recognized

WD drives have a different jumper setting for master and master with multiple drives. Do you have the WD set a master multi drive?
 

2 more replies
Answer Match 58.8%

The title is not exaclty correct.

This is a little different question than I have seen searching the various forums.
I had two WD 500GB external hard drives connected (via USB) and working well (not a trusting soul). Due to the dearth of USB ports on this old computer (which still works well), I have to disconnect one of these hard drives to upload photos etc. I use the safe hardware disconnect to do this and then plug the 2nd hard drive back in. It worked fine until now. Evidently the 2nd hard drive was not "stopped" the last time I disconnected it and now I cannot get it to be recognized. I have tried all of the WD suggestions but none work. I did get it listed under "my computer once" but when I tried to open it I got the message to stop it (which I did). Shutting down the computer and then powering up the hard drive (it does spin up) and plugging it in does not work. Sorry about the long description but and help will be appreciated.
Oh, yes the first ext hard drive is still working OK and all my data is being backed up on it.
Thanks much!
 

A:Second EXT Hard drive not recognized

16 more replies
Answer Match 58.8%

Hard Drive Not Recognized i followed this tutorial http://www.youtube.com/watch?v=Jclt_ylFWXs but i obviously done it wrong and wiped my hard drive and had to buy a new one. I still have the old one what i am wondering is can i take the hard drive out when my system is running and put the old one in and fix it with drivers. It's a Western digital hard drive if that makes any difference.
Thank you in advance.

A:Hard Drive Not Recognized

hi there

well on the motherboard you should have a few sata connectors so why don't you plug the drive(leave the new drive in you don't need to take it out) that you replaced back in(WARNING please unplug the pc from the mains lead pull the cable from the pc and press the on/off button for 5-10 seconds to discharge any power in the machine, and touch a piece of clear metal on the pc case to earth yourself to rid any harmful static before doing any work on your pc) and we will go from there ok. i take it its a internal drive? could you post your machine specs to help with diagnosing problems in the forums please.

9 more replies
Answer Match 58.8%

I am running a del gx110 optiplex 1gHz desktop. I was having a problem of hanging at the bios screen last week.. The hard drive died, so I froze it and got the important stuff off it. I switched out the hard drive and formatted and installed xp pro on the new one. Now when it starts up I get the following:
It hangs on the bios start screen (Says DELL). After a few minutes (no lie), it goes to a blank screen and says the cover has recently been removed. then next line it says "cannot find primary hard drive 0 cannot find primary hard drive 1. Strike f1 to continue strike f2 to enter setup". When I press f1, it boots up and everything runs fine. Any idea how to get it to recognize the hard drive and not have it hang up at the POST?

I checked the pins on the Hard disk and they are set to master.

Thanks
 

A:Hard drive not being recognized.

It sounds like the bios is not holding the settings, try changing the battery.
 

1 more replies
Answer Match 58.8%

I have a Kingwin 3.5" SATA hotswap rack in both my systems. My i5 3570K, and my E8400 systems are both running Windows7. The E8400 is Pro 64bit 4GB DDR3 and the i5 is 64bit Ultimate with 16GB's of DDR3. My swap drive is a 1TB Hitachi Deskstar. When I load it into the i5 system it's recognized right away. The E8400 system doesn't see it unless I reboot. I have a 811N Router/cable modem so the E8400 in the living room connects wireless. It's also connected to my 40" TV but I can't run video unless I swap the drive into that one and run the video directly on the system. Am I doing something wrong? In particular, the i5 has a blue ray burner but the E8400 doesn't, so I'm uploading movies from the ROM to the HDD and playing the HD movies in the living room. I hope thats not confusing.
 

More replies
Answer Match 58.8%

Hi everyone,
I have a new computer & put my old 120 gig hard drive on this system.....I formatted it by right clicking on the drive & when it finished formatting....all that was seen was 31.4 gig..my master hard drive is 120 gig as well....can some one tell me what I may did wrong please..Or what I can do to correct this problem..any help n this matter would be greaqtly be appreciated..? My system is a Pentium 4 2.8Ghz 512 Megs of ram,Asus motherboard P4S800.

*Thanks Bobbylee
 

A:not recognized all of hard drive

16 more replies
Answer Match 58.8%

Hey all! I am having trouble getting a second HDD to be recognized by Windows 8. Here's what I know, I have it plugged into the SATA 2 port, the original HDD is connected to SATA1, and the optical drive is set to SATA 3. There is an unused eSATA port. I don't know what it is for. I started the computer and entered the BIOS. It recognized the 2nd HDD, but when I start the computer and check to see if it is there, it doesn't show it. I looked under disk management, but all I can see it the primary drive and the optical drive. I have a Levono. Any help would be appreciated.
 

A:2 Hard drive Not Recognized

I am not trying to configure a RAID set up. I just that second hard drive so I can access my old files.
 

2 more replies
Answer Match 58.8%

I purchased a SSDNow V+ hard drive which is shown as Win 7 x64 compatible. After installing it and booting, I checked the bios and it shows the drive. After windows booted, I went to Acronis to clone my old system drive, and it found the new drive. I checked the drive tree in explorer planning on formatting it first, and the drive did not appear there. I checked Device Manager and the drive appears there. I went to Computer-Manage-Disk Management expecting to just change the drive letter. Unfortunately, Disk Management does not find the drive. It perplexes me that Device Manager sees it, but there is no way to access it.

More replies
Answer Match 58.8%

I installed a 200GB hard drive a while back and it was fine,.. computer recognized it as 200 etc, I had a problem and had to reformat the drive and I reinstalled windows XP home edition, but now the drive is only recognized as 127GB, I download the service pack from Msft, but no joy.

I also flashed the bio's

I also ran search and searched for Atapi.sys and found two in my system one was in the service pack it was 5.1.2600.1106
Other was in system 32 drivers and it was 5.1.2600.1135.

Also the file system on the hard drive is NFTS.
Any ideas how to fix this so I get the full potential from the drive.

===============================================================

Intel Pentium 4, 1900MHz
Memory 384MB RAM
Disk Drives C, E
C drive 200 GB.
E drive (slave) 40GB (both run at 7200)
Video NVIDIA GeForce2 MX
Internet MSIE 6.0
Windows Windows XP home SP1
Intel 850 Chipset
Graphics
Graphics card nVidia GeForce 3
Amt of video RAM 64 MB
Audio
Sound card Sound Blaster Live
Speakers Harmon Kardon HK-695
Interface Ultra ATA
Other drives included 10/16/40 Internal CD-RW

Modem 56K/V.90 PCI Fax/Data
Networking 10/100 Network Card
Ports 4 USB, 1 serial, 1 parallel
 

A:Hard drive not recognized

Please don't duplicate post.

http://forums.techguy.org/showthread.php?s=&threadid=194304
 

1 more replies
Answer Match 58.8%

I was given an old p133 with an 400mb hard drive and a 850 mb slave. A friend gave me a 2.1 gb hd so i wanted to make that my master. I tried to set it up with the Maxtor setup disk but my machine either won't recognize it saying its not dos or ntsf. Also when trying to set it up in fdisk it won't recognize the full capacity. Anyway I got fed up with that (also tried getting advice from Maxtor..no luck) and decided to make it my slave. It set up fine using the Maxtor software but then I decided to reformat my drive to clean up an old problem and when I reinstalled win98se the drive wasn't there anymore. After playing around a bit, re-installing 98 and re-doing the drive with Maxtor I created a dynamic drive overlay boot disk from the maxtor software and up it came. Only problem is is that I need that boot disk to run first for the drive to show up otherwise it's gone. Any suggestions on problem one or two? I would rather have this drive as my master but will sttle as a slave if I have to.
 

A:hard drive not recognized

Hi mfreamon,

I got a similar problem in the past when I wanted to add a 20 Gb hard drive to a computer Pentium II 450 Mhz / MoBo AsusP2B. The mother board didn't recognize hard drive with a size above 8 Gb. I had to flash the BIOS.
 

1 more replies
Answer Match 58.8%

Hi all, new to the forums. Was researching a problem and came across this board, and saw problems that were similar to mine but not quite. I'm working on a Dell XPS 400, we were wipping the drive and reinstalling XP, but as we got to the point to sellect a partition, it would say cannot write to the partition, and then we tried deleting it and it wouldn't allow it. So we got a new hard drive, the original one was only 80 GB, and we saw one for 320 for a great price so we scooped that one up. As we went on settting up the new drive, we came to the point again to select a partition, but there were none to choose from, and pressing enter brought us that notorious BSOD, stop code 0x0000008e, went back and forth with the installation cd, seeing if we missed something but nothing. Then i realized a problem as i'm looking inside the tower, the master was set to SATA 0 controller, but we had it plugged into SATA 1, changed that then i got a different stop code, this time it was 0x0000007f. Gave up on the new drive and went back to the old one and saw that he overlooked partition 2, which i used to install XP. Any ideas as to why the new hard drive wasn't recognized?? was it because it was so much larger than the original 80GB?
 

A:New hard drive not recognized

It may need a Bios update to see larger Harddrives
By the way it's best to start with no partition before installing Windows
And never manually create a partition, just let Windows automatically create a setup one

Here's all info on Dell computers (Drivers\warranty\parts you name it )
http://www.techspot.com/vb/topic100658.html
 

1 more replies
Answer Match 58.8%

Hi,
I"m running a home-built computer with a mach-speed MB, a Celeron 2.0G processor,256Mb DDR RAM, a DVD-Rom, CD/RW,and I'm running Win 98 SE. I was doing a little experimenting with a couple of old hard drives I aquired (they're both about 3Gig). I put them both in my machine and loaded my OS (Windows 98 SE).I formatted and partitioned both drives. One I jumpered as "primary-master" and the other I jumpered as "primary-slave". Everything worked fine. I drag/dropped some files onto the slave drive .

I switched my "primary-master" to a larger hard drive and reloaded my OS (formatting before loading my Windows 98SE OS). this time when I went to Windows explorer to move the files to the larger drive, the smaller one was not shown. I re-booted the machine and in the start-up, I see the drive listed , but I can't find it in My Computer or Windows Explorer. I've double, triple and quadruple checked my jumper positions and cable positions and everything is as it should be. I hear and feel the drive respond when I boot the machine and the indicator light comes on while the machine is booting.

The files aren't "that" important that I can't reformat the drive or even chuck it; however, I did put some music files on it that I'd like to "try" to get back. I'm more interested in the learning end of this dilemma. I could probably take it to a shop and see if they can get my files back, but I ... Read more

A:Hard drive not recognized

I would try connecting just the drive your having a problem with by itself as master or slave just to see if it is recognized. Then at least you know the drive didn't die and its just a configuration problem.

Also I think I have seen on some drives there is jumper setting for "master" and another setting for "master w/slave present" You may want to check that on the new drive you installed.
 

2 more replies
Answer Match 58.8%

My harddrive works great apart from the fact it has to be plugged in twice in order to be recognised by my PC/PS3, for example, i turn my PS3/PC on with the device connected via USB and it wont be recognised, i unplug the USB then plug it back in and it is recognised straight away, it seems to only happen when the device has been left turned off for any great length of time, when i turn my PS3/PC off and back on again (within 5 mins) the device is recognised no problems. any idea what could be causing this problem and how i can fix it???
 

A:Hard drive not being recognized

You could try:

Go to Device Manager:

Click Start, then right click My Computer, select Manage. Go to Device Manager, then under Disk Drives, right click the External Hard Drive and go to Properties, go to the Power Management tab, then uncheck the option to "Allow the computer to turn off this device to save power"

However, the computer may turn back on from standby/sleep if the hard drive requires any power at all..
 

1 more replies
Answer Match 58.8%

Help me. i have a Compaq presario that came with Vista(unfortuneately). I purchased an IDE to SATA adaptor so I could install a new 200GB HD I got..I want to install XP on it and dump the Vista (but keep the HD with all my stuff on it). Probllem is, my computer will not recognize the hard drive. it gets to the point where it says click "enter" to start XP installation, but then get the error message. I know the HD works as I have tried to install on 2 different computers and it works great.
I know I could do a dual-boot option, but I want to also use this 200gb HD that is just sitting here. Any suggestions?
 

A:Hard Drive Not Recognized

10 more replies
Answer Match 58.8%

I have an Emachines computer that died (motherboard). I removed the hard drive and plugged it into an external bay to make sure it was OK and it checked out fine. I then installed it in a Dell computer as the master drive, but when I turn on the computer it says that no media was found, that the boot device was missing, and it stops the system. Any ideas as to why? How do I set it to recognize the drive? I would love to get it going. Any help would be appreciated. Thanks.

Bob
 

A:Hard Drive not Recognized - Why?

Check that the hard drive shows correctly in the BIOS.
If not, you probably haven't attached/jumpered it correctly.
 

2 more replies
Answer Match 58.8%

Well, my Windows 7 laptop has been dead for a while, but now I want to see if it can be fixed.
The laptop no longer recognizes the hard drive. I checked in the BIOS settings, and it shows there being no hard drive whatsoever. I opened the laptop up and made sure nothing was broken; nothing was. I pulled the hard drive out, and neither the hard drive or the connectors are showing any external damage.

My theory is that it's suffered some sort of internal damage. It was already giving me bad sector warnings and BSODs before the incident happened.

Another theory popped into my head. The motherboard might be going out, as one of the RAM chips that came default with it started causing it to freeze, but removing it would allow the computer to run properly. But one thing that goes against this idea is that I can still run Linux distros off of my USB drive.

Do you think either of these are the cause? Or do you all have any other ideas that might explain it and/or make it run off the hard drive again?

Oh yea. Specs:
Dell Latitude D600.
Hitachi Travelstar 40GB 5400rpm HDD

I'll look for the motherboard sometime soon.

Thanks for your support in advance.

A:Hard drive not recognized.

Well...

You could have bad memory and you could have a bad drive. Do you have an optical drive? If yes, boot your notebook up with a "live" version of Ubuntu, Knoppix or similar program.

Knoppix Linux Boot CD, Download Disk and Documents, Discuss, Get Help

Download | Ubuntu

Test your computer. If is seems okay, then it's time to test your other memory module out. If it's good fine. Otherwise order another memory module.

My sister-in-law's notebook had a bad drive. It's still sitting on my desk. I replaced it and she's good to go.

It's just a process of elimination. First make sure your notebook works. Buy your memory from Crucial.com. Hard drive from newegg.com

6 more replies
Answer Match 58.8%

My dell Inspiron 6000 crashed and I had a message that it was a hard drive problem. I bought a new hard drive and when I plug it in, it shows that it is not recognizing the hard drive. I went into the set up and under hard drive it says [none]. I made sure it was set in properly, but still no luck. Any ideas?
 

A:Hard Drive not recognized

Maybe it's your data cable. I mean I had a similar problem before. First I thought it was my hard drive, but after ruling that out, I finally found that I needed a new data cable.

If your system has a spare data cable (like your CD drive, if connected through another cable on your other IDE port) test this one on your hard drive.

You could also test your hard drive on a friend's PC to rule out hard drive malfunction.
 

2 more replies
Answer Match 58.8%

Well I am back again sooner than I expected. I am running Win XP Home (upgraded Win98). I currently have two hard drives-14gig with the OS on it and a 60gig for everything else. Both are IDE.

I purchased a Maxtor 120gig sata hard drive and my intentions were to eliminate the 14gig as the boot drive by replacing it with the new one. I didn't have an onboard connection so I installed a PCI controller which the device manager says is working properly.

I figured no sweat, just install the new drive, format, partition and copy the boot drive to the new one using MaxBlast3. The problem is I can't get the computer to recognize the new hard drive when it is hooked up so I cannot do squat.

Anyone got any input that might help me?

It doesn't show up in the bios or My Computer.

Thanks in advance!
 

A:New hard drive not recognized

16 more replies
Answer Match 58.8%

I just bought a new drive (http://www.newegg.com/Product/Product.asp?Item=N82E16822148100) for a case I've had for about two years (http://www.newegg.com/Product/Product.asp?Item=N82E16817173002R). Windows is not recognizing the drive at all and I've tried the standard fixes. First and foremost, is the drive compatiable with the case? What else can I do to get Windows to recognize the new hardware?
 

A:New hard drive not being recognized

16 more replies
Answer Match 58.8%

Hi,
Trying to sort out an old computer with a chaintech CT-6BTA3 motherboard. I did have it working fine and it was running windows 98 no problem, accessing internet etc. It then stalled on boot up at the usual 'verifying DMI data pool' problem and as the hard drive was clicking decided that the HDD was the problem. I have tried a Maxtor HDD that was given to me and now both HDDs are not recognized by the BIOS or during boot up. It just says '0' for all drives. I have checked cables etc, cleared the CMOS and loaded up the defaults. I have tried 'auto' detecting and 'normal' for the drive settings but neither drive is working. I have tried FDISK but no drive is found. Any ideas much appreciated. Thanks Ian
 

More replies
Answer Match 58.8%

I am building a computer from scratch and I've run into one problem.

I have installed a Hitachi 80GB SATA hard drive, and it is recognized by the BIOS and motherboard, but when I try to install WinXP Pro it tells me I have no hard drive installed and therefore can't format/partition/install windows.
Because it's a SATA drive, it has no jumpers and is set to master by default, so that's not the problem. It's a completely new drive, so it shouldn't have anything on it at all.

Any help at all would be greatly appreciated.

Hitachi 80GB 7200RPM SATA Hard Drive, Model HDS722580VLSA80
ASUS A7V880 Motherboard with VIA KT880 Chipset
 

A:Hard drive not recognized

6 more replies
Answer Match 58.8%

I have a non-branded box running Windows XP. All of a sudden my SATA hard drive is not being recognized. I have taken the hard drive out and it is being recognized in another computer. I put in another working SATA hard drive and it was not recognized.

I have a msi k8n nero 4h motherboard.

There is a SATA cable from one of four mobo sata connections. All four of them are enabled. The SATA hd is connected using a standalone 4-pin connector converter cable similar to the following:
http://www.newegg.com/Product/Product.aspx?Item=N82E16812201002
I have taken both standalone cables and tested them on another computer and they both work.

Any suggestions on why the hard drive is not being recognized will be appreciated.

Update:
When I hook up an IDE drive the computer recognizes it and it boots up perfectly.
 

A:Hard drive not recognized

Have you tried connecting the hard drive to one of the other Sata ports?
 

2 more replies
Answer Match 58.8%

Vista, Service pack 2, 2MB Ram, 2 X 100gb hard drives in Vaio VGN AR51E laptop
----------------------
Hi I am having a hard drive problem, specifically, second hard drive.
I just reloaded a Sony Vaio VGN AR51E laptop using the sony recovery disks.
Works perfecty except for not recognizing 2nd hard drive. It shows 2 100 GB drves in Bios But "My Computer" and "Device Manager" only see C and it is listed as 84.2GB, not 100 as it should be (I know it never shows full size but not minus 17GB) I tried "New hardware" but it doesn't seem to list hard disks Just storage controllers
I changed the second hard drive to another, no difference, I have checked the cable connections to hard drives and even swapped with cable from a similar laptop. Both drives show in Bios as 100GB so it must be a Windows problem, I think.
Would appreciate any help on this as I am trying to sell and cant till I sort this out
Thanks, Boyd
 

A:2nd hard drive not recognized

6 more replies
Answer Match 58.8%

My WinXP Pro crashed today, and I had to reset the PC. After reset, the screen stopped at the "Finding IDE devices page" for a long time. After a long time, it found my primary HD and my CD-ROM, but didn't find my secondary HD. The whole initial loading process is taking forever. I can't even get pass DOS mode. Is my HD broken? If it is not recognized, I can't even format it then. Please help. Thanks.
 

A:Hard Drive not recognized

Oh, After I removed the HD, the system runs smoothly like before.
 

1 more replies
Answer Match 58.8%

hey, i am trying to backup files and programs to an external hard drive. and a messages comes up saying "one of the USB devices attached to this pc has malfunctioned and windows does not recognize it. can anyone help? thanks

A:Hard drive not recognized

Usually this means there is a hardware issue.
Can you try the external HDD in another PC and see if the issue occurs there?

If not, then you may want to reformat it and then move it back to your PC and see if the problem happens again... if it does, then you may have a USB issue on your machine.
Try another USB port if so, and if that doesn't do it, try reinstalling your USB device drivers for your PC.

Though 9 out of 10 times this is an issue with the device which may be remedied by moving to another computer, or the device itself is actually damaged/defective.

2 more replies
Answer Match 58.8%

Hey can anyone please help me out with this problem. I got a new ADATA Nobility NH03 1TB 3.0 External HDD and it works on the USB 2.0 ports but it is not recognized at all on the 3.0 ports, the device still lights up when I plug it into the port but nothing happens on the pc. The USB 3.0 port can see my other USB 2.0 devices though. My motherboard is an ASRock 870 Extreme3. I have the USB 3.0 enabled in my BIOS.

Please help me out and thank you.

A:USB 3.0 Hard Drive not being recognized

nevermind i fixed it

1 more replies
Answer Match 58.8%

My Western Digital MyBook 1.5 GB has recently stopped working. I spins for about 20 seconds, then stops. It is not recognized in windows explorer, but it is recognized in device manager and disk management.

Under disk management it says that it has 2047.35 GB unallocated space.
It also says the disk is unknown and not intitalized. When trying
to intitalize the drive, it says "The media is write protected".

I have tried swapping usb cables, running safe mode, and freezing it.

Any help would be amazing! Thanks!

Picture of Disk Management


Picture of Windows Explorer and drive properties

A:Hard Drive Not Recognized

When a drive/parttition can be seen in the Device Manager and Disk Management, but does not show up in My Computer, most of the time it is only the partition table that is either missing or corrupt.

In such a situation my advice will be to try and fix it with the freeware Test Disk. The program runs in a command window and may be a little daunting to a new user but if one diligently goes through the step by step procedure given in the online documentation, it shouldn't be difficult. Download and documentation: TestDisk - CGSecurity.

5 more replies
Answer Match 58.8%

Hi,

I have an iomega hard drive that worked fine for a few months but is no longer recognized by any computer. I store movies on it and my television still recognizes it but my Macbook does not nor does my friends PC. I am very much a computer novice. Thanks to anyone who can help.
 

A:hard drive not recognized

see if it is on tv mode. if so switch it.
 

2 more replies
Answer Match 58.8%

My computer is a Dell XPS ONE with a samsung hard drive running Vista. I have had nothing but problems with the hard drive on it. Changed it 3 times going on 4. I tried to run repair but it froze and I shut down the computer and now I can't boot from it. Presently I am using ubuntu (from a cd) on it so I can access the internet. Ubuntu doesn't recognize my hard drive either, it just shows a drive "mass storage" but can't mount it. I do have a backup but it is a couple of weeks old and I wanted to get the most recent files which are also important to me. Is there anything I can do? The last time this happened I was able to access my OS through Ubuntu but that is not the case this time. Also, when I was trying to boot up I kept getting an error message..something about PXE??..
 

A:Hard drive not recognized

The 1st thing to do is figure out what is killing your HDD's. You could try installing the drive as a second drive in another computer or into an External Enclosure to see if the drive it self is readable, and if it is you can copy data off it that way.
 

2 more replies
Answer Match 58.8%

trying to install OS, can use scandisk on drive, but then when trying to fdisk, message says "no fixed disk". is there another command to fdisk and format? Maybe my drive is bad - another drive works fine, and can be fdisked.
 

A:hard drive not recognized

Hello and welcome to TSG!

If you plug a different drive into the channel and it works ok then yes, I would suspect the drive. Pardon me for mentioning the obvious but: have you checked the drive to ensure that it is jumpered correctly?
 

3 more replies
Answer Match 58.8%

I can't seem to get my SATA drive after reformatting. I botched up my file system and had to wipe my hard drive. Then when I went to reload everything, my computer doesn't see the hard drive. I don't believe there is a problem with the drive, I think I'm just not sure how to set it up properly. I'm using an IDE hard drive now with XP just to have something, but I need to get the sata working...

any help is GREATLY appreciated

thanks

Nick
 

A:Hard drive not recognized

Is the SATA drive to be the drive that you want Windows to be installed on or is it a secondary drive?

You probably need to install the SATA drivers for the drive to show up or if its a secondary drive you need to repartition/reformat the drive thru Disk Management.

Latest VIA drivers here: http://www.viaarena.com/default.aspx?PageID=420&OSID=1&CatID=1070
Guide on how to make a driver disk to install XP on a RAID enable SATA drive: http://drivers.viaarena.com/installguides/HyperionPro5XInstallationGuide.htm
 

1 more replies
Answer Match 58.8%

I can't seem to get my SATA drive working after reformatting. I ran disk cleanup and had to wipe my hard drive after I accidentally deleted some system files. Then when I went to reload everything, my computer doesn't see the hard drive. I don't believe there is a problem with the drive, I think I'm just not sure how to set it up properly. I'm using an IDE hard drive now with XP just to have something, but I need to get the sata working. I was able to recognize it on XP (from the ide drive) and recover some files before reformatting. But since I can't recognize the drive

any help is GREATLY appreciated

thanks

Nick

ABIT AV8 Socket 939 VIA K8T800 Pro ATX AMD Motherboard -

SAPPHIRE 1024-TC13-05-SAL Radeon 9250 256MB DDR AGP 4X/8X Video Card

CORSAIR ValueSelect 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 400 (PC 3200) Dual Channel

Seagate Barracuda 7200.7 ST380817AS 80GB 7200 RPM Serial ATA150 Hard Drive - OEM

Track 1 NEC DVD Burner Black IDE/ATAPI Model ND-3540A - OEM

AMD Athlon 64 3000+ Venice 1.8GHz Socket 939
 

A:Hard drive not recognized

Hi,

You need to install the SATA drivers during the WIN XP installation from floppy disk or CD.

Press F6 when asked about installing other drivers and have the disk ready.

The XP installation will then install the SATA drivers and continues with th einstallation.

Look on your motherboard manufacturers web site or CD's supplied with motherboard for the drivers.

hth

Ceri
 

2 more replies
Answer Match 58.8%

Have an old Pentiium 2 system that still works great. It did have a 10GB and an 8 GB hard drive(s) inside till the 10 went down the chute. Have been using the 8 GB as my master for a few months....but as its only a 5400 speed things are noticably slower than when I used the 10GB which was a 7200 speed.

So bought a 40gb (7200).....was gonna go for 20 GB, but the 40 was only six quid more expensive. Got it home, installed it as the primary......and bios won't acknowledge its existence. When its searching for the primary IDE, the (press f4 to skip) dialogue comes up, and then nothing happens. Its doesnt seem to detect it, and doesnt even go on to read drive a: (The boot up sequence being a:, c:,e: ). Just sticks there, red light of drive working goes out after a bit then nothing.

Have messed with bios...enabled auto detect and LBA as stipulated on the top of the drive...no recognition. Tried old drive (8GB) in...works a treat. Tried new drive (40GB)in my Pentium 4 system....which detects it no problem. So whats up ? I know some older systems have problems with working with big hard drives.....but do they have probs even detecting them ? Is so whats the biggest I can run...how can I find out......heelllllppppppppppp !!!!

Paul
 

A:Hard Drive not Recognized

7 more replies
Answer Match 58.8%

Hi there everyone,

I recently got a blue screen (not my first), but this time my neither of my hard drives are recognized in my BIOS. I run Windows XP off of my master, and use my slave for backup and for my personal data. While I do work on computers rather frequently, most of it is virus problems and stuff like that. I do have a boot cd that I created and neither hard drive shows up using that either. I would assume that this is a motherboard problem, but like I said, my knowledge with troubleshooting this type of problem is virtually non-existent. Any help would be appreciated. I know that I have not given much information in this post, but honestly, I don't know what needs to be known in order to help troubleshoot this. I am happy to provide any more information that is needed. Thanks again!
 

More replies
Answer Match 58.8%

Appreciate some assistance.

Have an AZZa mainboard, 5VMX, with an AMD K6-2/550 CPU and an AWARD BIOS 07/04/2000-VP3-586B-W877-2A5LEP8AC-00.

Trying to install a hard drive, and it will not recognize it. Keep getting "Primary Master hard disk failure" over and over.

This computer was infected by a virus a while back. It was never quite right, so decided to clear out the hard drive, and start from scratch. However, the BIOS will not auto detect the hard drive that was on it, nor any other hard drive. Have tried 3 different ones.

The cables are tight, and connected correctly.

Any ideas on what to do?
 

A:Hard Drive Not Recognized

10 more replies
Answer Match 58.8%

Ok, I am not too sure what happened to my hard drive. I had gone downstairs to help my parents out with there computer, and when I returned, I had a black screen with the sentence, "Press F1 to retry boot or F2 to enter setup". It turns out that for some reason, my hard drive is not being recognized anymore by the BIOS and it won't boot. I tried automatically finding my HArd Drive in BIOS, but it says nothing is found. I hear that there is a virus that can prevent the hard drive from being found. I cannot run FDISK, Windows setup, or just plain Format because it says a hard disk was not found. Can somebody please help me figure out what the probem is, because I am realy not in the mood to buy a new hard drive. Thanks for all your help.
 

A:Hard Drive not recognized

Download a bootdisk from here

that will get you to an A:\ prompt for commands.
Probalby wont help much until you get the bios to find your hd.

open up your case, blow the dust out of it and reseat all your HD cables(power and ide) then reboot.
 

2 more replies
Answer Match 58.8%

Hi from glenaurora

I have recently installed a 2nd 500GB HD and it will not work on my desktop. It's use is for extra capacity only. The OS is Windows XP home. It is installed via the shared ribbon cable with the original 160GB HD. The ribbon cable is plugged into the secondary mother board connector(this is the way it's always been) The 500GB HD(New) is connected to power and the grey 40 pin connector and the 160GB HD(Old) connected to the black 40 pin connector The old HD is set to "master" and the new HD is set to "slave" When both are connected I get a message upon boot up telling me there is no OS installed. When I disconnect the 500GB HD from power and the ribbon cable everything works fine. Could this be a matter of formatting the new HD or does it need to be connected seperately to the primary ribbon cable connector on the mother board? It only lists HD :C and at no time lists the other HD.
 

A:New hard drive not recognized

It might just be an issue with boot priorities in BIOS. Head into BIOS and check the boot order.

Ideally you want it to be the following:

1st: CD/DVD drive
2nd: Your 160GB hard drive with the OS installed.
3rd: Can be anything really.
 

4 more replies
Answer Match 58.8%

HELP! I have a 40GB HD that I want to use as an external drive. I have it hooked up through a USB port and an independent power supply. My problem is this: I wanted to format it and followed directions from a Google site. They told me to right click on My Computer, use the Manage option, go to Drive Manager and then get rid of the partion on the drive. When I did this, the drive dissappeared from "My Computer" AND the Drive Manager although it still shows up in my Device Manager. What do I need to do so that my XP home edition will again recognize the drive? I sure would appreciate any help.
 

A:Hard drive not recognized

7 more replies
Answer Match 58.8%

Hello. A month ago I was instructed here on Bleeping Computer that my HD is failing. As it was still under warranty, luckily I got the new HD for free. Now I decided to install Windows 8 on it, and I did so using a bootable USB. I partitioned my disk (system reserved
 + 100GB primary drive + 500 GB secondary drive). I went through the steps until it got to personalizing my settings (finalizing and personalizing my settings took a while to finish). Then the laptop restarted, however, as my boot order was set to USB, it went to Windows installation again. I closed that, restarted the laptop and wanted to change boot order, however there was no hard disk listed or available to choose. I only get the DVD as a boot option. What should I do? Thank you.

A:Hard Drive not recognized

Hi
 
Is the HDD is detected in BIOS ?. Some systems do have an option to disable some boot device by adding to an exclusion list. You should check if the HDD is accidentally moved to the "Excluded from boot order" list.
 
Some system BIOS uses a HDD emulation mode to boot from USB. If that is the case, USB Pen drive may be treated as the first hard disk and hence your HDD may be omitted from the boot list. Remove the USB stick and try to boot. 

6 more replies
Answer Match 58.8%

I'm trying to replace the hard drive in my Compaq Presario R3200 Athlon 64 laptop and do a clean install of XP. My failed hard drive is an 80GB ATA/IDE Hitachi. The new hard drive is 320GB PATA/EIDE Western Digital. I have no idea what I'm doing, so I thought I'd see how far I could get. When I choose to change the boot order, I get a screen that offers, among other thing, to enter setup. If I choose to Enter Setup I get sent to the PhoenixBIOS Setup Utility with the tabs "Main, Security, Advanced, Tools, and Exit" at the top. The only thing that I understand to do that I'm sure won't cause any unintentional damage is in the Tools tab where I have the one option, which is to execute "HDD Self-Test". The result of the test is "No IDE Device".

I have two disks, "Operating System CD; Microsoft Windows XP Professional SP2", and "Application and Driver Recovery DVD". When I reboot with the OS CD in the drive, a bunch of files are loaded and I am given the choice to install XP, repair XP, or to quit without installing. When I choose to install I get the message "Setup did not find any hard drives installed on your computer". Also included on the page is the statement that I may have to run a manufacturer-supplied diagnostic or setup program. Might this be a reference to Automated System Recovery?, which I don't have.

Obviously the new hard drive is not being recognized. This was not for... Read more

A:New hard drive not recognized

Compaq...is responsible for detemining what your reinstallation options are...and how they work...unless you have a purchased MS Windows CD which can be used to do the reinstallation.If the two disks you mention...came with that system...you need to review the procedures for using such.Since this is a laptop...I assume that you have disks provided by Compaq.http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=425696&prodTypeId=321957&objectID=c00006110Your System's Support WebpageIf both hard drives are PATA/IDE...then I would check the jumper settings you currently have on the new drive. Typical jumper settings should be as prescribed by the hard drive manufacturer.http://wdc.custhelp.com/app/answers/detail/a_id/981/c/123/session/L3RpbWUvMTMxOTczMzc5OC9zaWQvQ0x5YWJESGs%3DLouis

2 more replies
Answer Match 58.8%

After removing a virus, my 3rd hard drive is no longer being recognize. My apologies if this should be in hardware, but I didn't know if it was something that had to do with windows 7
The virus was anti-virus protection 2011.I used antizeroaccess, stopzilla,avg(which is my normal antivirus), malwarebytes, and kapersky
Yes all of them. It was a nasty virus.
My main hard drive c: shows up as well as my second drive. e:. My other drive used to show up as well as f: but since all of this it hasn't. Nothing else was changed besides resetting the cmos battery and a couple of disconnect reconnections, becasue the drive wasn't showing up.
Ide channel 0 master and Ide channel 0 slave (set to cable select). are the 2 hd's
Ide channel 4 is a disk drive.

The 3rd HD is also set to cable select. but that shouldn't matter cause that's what it was set to before.

I also tried another spare hard drive I had with the same connections as the 3rd hard drive ( marked as slave and cable select). It was not found either.not in my computer or in bios

Not sure what happened. No other hardware was removed or inserted.
If someone could help me out I'd greatly appreciate it. I have a lot of stuff on there.

Running windows 7
Mobo gigabyte ep43-ud3l

A:Hard drive not recognized

One additional piece of info. the disk is cycling with power and I've tried another sata cable and sata port

9 more replies
Answer Match 58.8%

I have a Dell Dimension XPS T350 computer that does not recognize my hard drive. It's not a hard drive problem because I have tried other hard drives that work in my other computers. The ribbon cable is connected tightly. The jumper is set correctly.(Master) I've checked the bios settings. When I type "C:" a message comes up saying "Invalid Drive Specification". Also, when I type FDISK , a message comes up saying "No FIxed Disks Present". I had the same problem with my Compaq Deskpro 2000. I attempted to take out the cmos battery by prying it out but it was difficult to remove so I left it alone so as not to create more problems. I tried rebooting again and I was able to get to the "C" prompt, although the "D" drive wasn't appearing when I clicked on "MY Computer". I had to reinstall Windows 98SE. But for my Dell computer I took the battery out and put it back in and the hard drive is still not recognized. Any suggestions as to the problem with my hard drive not being recognized?
 

A:hard drive not recognized

Is this a new drive? Did the problem start all of a sudden?

Does the BIOS recognize the drive?

Take another look at the jumper. Some require a jumper only when on a cable with another drive, and some require a different position of the jumper if there is another drive on the same IDE cable. Try removing the jumper altogether.
 

3 more replies