Tech Problem Aggregator

Re: Printer installation won't complete. Error 1075: the dependency service does not

Q: Re: Printer installation won't complete. Error 1075: the dependency service does not

I have a similar problem.... turn on print spooler, then go to add a printer and it says the print spooler is not running. round and round I go.

More replies
Answer Match 129.6%

Apparently something called print spooling is not working on my computer. I get error message 1075: the dependency service does not exist or has been marked for deletion. I believe this is why the installation won't go all the way to the end. The computer recognizes the printer but won't go ahead and finish installing it. Anybody got any suggestions?

A:Printer installation won't complete. Error 1075: the dependency service does not exis

Are you using Windows ME or Windows XP?

14 more replies
Answer Match 82.8%

i have been fighting with this problem for ages.
my sound does not work, i dont know why, as far as i know, nothing was added before this started, everything was working, i got up the next day and there was no audio, it no longer registers my disc drive as being there, and i cant play an videos from youtube (other sites fine, though still no audio)
laptop tells me, theres no audio installed, but all drivers state everything present. tried on here before but with no luck

heres a run down from my last post:

i have no audio. if i click troubleshoot problems it says the audio service is not running
it says the windows audio and endpoint builder arent working
if i go into services, windows audio is set to automatic but its not on, when i click start it says "error:1075 the dependency service does not exist or has been marked for deletion"

medion akoya e6214 notebook
windows 7 64 bit sp1 home premium edition
intel core i3cpu [email protected]
4gb memory
2 ram i think
also, i have no system restore points, the windows repair disc doesnt work and i have no windows 7 install disc and cant burn one as my disc drive wont register

i have installed drivers for medion akoya as instructed but it did nothing

windows audio still states its not working, when i go to services, its set to automatic but wont stay on and i get the above error message!

im at my wits end, i cant back up anything so i dont lose it, cant restore, or repair, sfc scannow says i cant do it unless im admi... Read more

A:windows audio: error 1075 the dependency service does not exist or has

From your description there are many more problems than just the windows audio error.

I would suspect an Operating System problem. If you can find a friend to download the Windows 7 Home Premium ISO and burn it to a DVD, that would give you the needed disc to try and repair Windows. Although your DVD drive does not work in Windows, it should work for booting.

Here is the link to the forum post. There are links to the various versions. You can download the same version that you have.
Official Windows 7 SP1 ISO Image Downloads | Windows 7 Forums

4 more replies
Answer Match 92.4%

Can someone please help, I can't connect to the internet whenever I connect it just connects local only and says the dhcp client isn't working on this computer when I go into services to manual start it says windows could not start the dhcp client on local computer error 1075 the dependency service does not exist or has been marked for deletion it happens on anyones internet I cant connect to wired and wireless, any help will be really appreciated as I have been trying to fix this for weeks now

A:windows could not start the dhcp client on local computer error 1075 the dependency s

Hello, lets do some cleaning up and see if that helps you out .
How to Flush DNS in Windows Using the Command Prompt

Step 1 ? Close all open web browsers and applications on your computer.

Step 2 ? Open the Windows command prompt by selecting the ?Start? menu and then go all programs, accessories, then right click command and run as admin.

Step 3 ? At the command prompt, enter ?ipconfig /flushdns? followed by pressing the ?enter? key. After a moment, Windows will display a message similar to: ?Successfully flushed the DNS Resolver Cache.? Once the message is displayed, the DNS will be flushed removing all incorrect entries.

Then , we want to get the IP reset, so, lets renew its settings and see if this also helps out :
you will type in the command box : ipconfig /release then enter, then next ipconfig /renew then enter, this will reset the IP , now restart and attempt to have it reconfigure its connections to your router. Post back results please.

3 more replies
Answer Match 80.22%

I am attempting to the load the software for a Canon Mx850 printer to my Lenovo PC with Windows Vista.

I get the message Print Spooler Service has been stopped. I have checked in the services area and it is set to automatic. When I attempt to start it. I get the following Error: 1068 dependency service or group failed to start.

I have gone to the command prompt and typed the following: sc config spooler depend= RPCSS however I get message access denied. I am set as the system administrator. Not sure what to do at this point. Very frustrating. Printer works fine when connected to laptop. Any help will be greatly appreciated.
 

A:Print Spooler Service stopped Error 1068 dependency service or group failed to start

Double click on the Print Spooler service to open its Properties. On the Dependencies tab see upon what it depends, and trace back to see if the cause/fix can be determined. Caveat: no guarantee this will work any better than your command attempt.
 

1 more replies
Answer Match 78.12%

Hey all!
I am really desperate. I've tried a few things that other people have posted here, especially Cookiegal and Lumpola but this issue persists.

I had a virus. I think I got rid of it. Avast scans and boot time scans and Super Anti Spyware and TDSS killer report all clear. However, the network shield of Avast and the Internet don't work.
Points to note:
1. In services, the DHCP and DNS cannot be started. I get the error 1075: service has been marked for deletion or one of it's dependancies are missing. (close to that)

I've checked the dependancies of both, and reinstated the ADF module in device manager after selecting the 'View Hidden' option.
 

A:DHCP Server Service -Error 1075 - not starting

2. I've tried deleting the winsock and winsock2 entries in the registry.
3. From the command prompt, SFC/scan now terminates at 82%. thrice.
4. I can see the network, both wired and wireless, I can connect, but it says I have limited connectivity.
 

3 more replies
Answer Match 77.28%

Avg found two trojans. It didn't seem like it removed them. Internet was working though. Ran malwarebytes it found nothing. Internet was still working. Started Having connectivity issues. My dhcp client service won't start. I got a 1075 error. my internet via wifi or wired. I ran the following command prompts:
net start AFD (response: the requested has already been started)
netsh int ip reset reset.log (response: resetting echo request, failed. Access is denied. Rebooting interface, ok! A reboot is required to complete this action.
netsh winsock reset catalog (response: successfully reset the winsock catalog. You must restart the computer in order to complete the reset.
SFC /SCANNOW (scan finishes and shows this response: windows resource protection found corrupt files but was unable to fix some of them. Details are included in the cbs.log windir\logs\cbs\cbs.log

What now? Please help.
 

A:Network issue dhcp client service error 1075

I'm thinking you're still infected.

----------------------------------------------------------------------

You need to start a thread in the Virus & Other Malware Removal section of this site.

Before you post though, you need to read THIS guide.
 

1 more replies
Answer Match 77.28%

Hello,

On July 12th 2012, my computer installed updates. After rebooting and waiting for me on the login screen, I gave it a hard shutdown to check on the BIOS settings (for a little side project, in the end I did not save any changes). After booting and logging in again, I find that many services are not running. I ran a very thorough check for malware and viruses (took over 24 hours to complete), and still no solutions. I have uninstalled/reinstalled my Broadcom 802.11g Wireless Driver several times.
I now look in the Event Viewer and find that the DHCP Client service is not running! It is set to automatic start in Services.msc, but when I try to manually start it, it gives me error 1075 (some dependencies do not exist or are marked for deletion). Running ipconfig, I notice that my system is using an APIPA-formatted address (169.254.x.x), indicating that the computer couldn't find a DHCP server.

My Event Viewer is peppered with:
------------------------------------------------------------------------------------------------
Event 7003, Service Control Manager

The DHCP Client service depends the following service: Afd. This service might not be installed.
------------------------------------------------------------------------------------------------
Event 7001, Service Control Manager

The WinHTTP Web Proxy Auto-Discovery Service service depends on the DHCP CLient service which failed to start because of the following error: The dependcy service does not ex... Read more

A:DHCP Client Service FAILS TO START! (Error 1075)

It sure sounds like your computer is having its share of issues. Did you get the services started that you mentioned in your other thread?

7 more replies
Answer Match 76.44%

Hi when i try to run my windows XP sp2 windows firewall to stop it from disabling my connections. i get the message "Windows firewall cannot be displayed because the associated service is not running. Do you want to start the Windows firewall/internet connection Sharing (ICS) service?" i click yes then i get "Windows cannot start the Windows firewall/internet connection sharing (ICS) service.". i then went start>run>services.msc and found that when i try to manually run the Windows firewall/ICS i get this message "Could not start the WF/ICS service on Local Computer. Error 1075 the dependancy service either does not exist or has been marked for deletion." Please help me. I just want to be able to open my ports and host Warcraft 3 games.
 

A:Windows Firewall/Internet Connection Service cannot start...error 1075.

6 more replies
Answer Match 76.02%

Greetings: I re-installed a printer (Dell 1210 All in One) on an old DELL pc, Windows XP, and cannot get it to install/print. It previously worked with this PC, but it reinstalled itself every time I booted the computer. (When paired with my acer laptop using Windows 7, all functions, including printing, work.) It will copy and scan with the DELL pc. I received the above message: "Could not start the print spooler service on local computer. Error 1068: The dependency service or group failed to start." I obviously do not know much about computers, but am trying to learn some things by working with/on this old pc. Thanks for any help!

A:Error 1068: The dependency service...

1) Did you install the printer driver and did it install correctly? If not, go to the Dell Website and download and install the correct driver.
 
2) Go to START - RUN and type services.msc (then press enter). Locate the Print Spooler service and double click on the entry. Click on the "dependencies" tab. Now locate the services listed in the dependencies tab and see if they are running. If not, try to start them (if they are set to "disabled" you should change the setting to "manual" or "automatic"). Now try to start the Print Spooler Service.
 
Please report back.

8 more replies
Answer Match 75.18%

hi Ive been trying to do internet connection sharing and it says it cannot because the dependency group failed to start,and when I check its dependent services and start each one (some will start some wont) then it just starts growing , the when I enable the service needed it also say it need another service for that,
and also im not quite sure but when I try to diagnose the internet connection,,it says the diagnostics policy is not running, so I go to services my diagnostic policy host and policy service are both set to automatic but not started and when I choose to enable it, it says
'it started and stopped,some services stop automatically if they are not in use'
what gives? I can use them before even when they are not in use,,,when I scan for problems

please help me,,
I did a hijackthis scan,,
and please tell me if I can attach it here
Ive also download the GETSERVICE batchfile from your site,,

please help me,,,,,,,

thanks

A:Problem with ICS(service dependency group error)

If you suspect that you have an infection I would suggest that you follow the instructions in This Guide starting at Step 6.Once the proper logs are created, then make a NEW TOPIC and post it HERE Please include a description of your computer issues and what you have done to try to resolve them.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.

3 more replies
Answer Match 74.34%

Two days ago, I had to configure my PC to my college domain so as to access the on-campus network access. The configuration was successful but on opening network and sharing center, I find "Dependency service or group failed to start" error message in place of the connected network name. Oddly, this error is not interfering with my internet connection whether on-campus or off-campus. Now, if I had to manually enter an IP address, I have to go all the way through "Change adapter settings option" and select properties from my WiFi name. I could not find any fix to the issue. Please help.
Regards

More replies
Answer Match 73.5%

Alright in the last few weeks, this error has happened. When I go to control panel-->Security center, it sais it is not running and I need to enable it. When I go to services.msc, and try to enable it and my (Windows Firewall/Internet Connection Sharing (ICS)) it gives me this error.

Cannot do this action on this local machine.
Error 1068: The dependency service or group failed to start.

I tryed going to registry making a new key, named Security Center and a new DWORD and changing the value to 1. This did not work. Then I tryed enabling all the services that needed that one to run. Everyone I could enable accept one process, which gave me another error 1717.

Also under ALL my services, when I go to Properties--> the 4th tab "Dependancies" It gives me a Win32 error, which might be part of the problem.

But basically, obviously whoever knows how to fix this needs to know alot. =p I've been dinking around googling it, but no luck.

Anyways until I get this fixed, I dont have my secrutiy center running or a Firewall. (Windows XP built in firewal) which is my main concern, becasue I need my firewall.

So yea, Thanks in advance and I'll continue to research this topic.

Cheers,
Dane

A:Error 1068: The Dependency Service Or Group Failed To Start.

These 2 services must be running in order for the Security service to run:1) Remote Procedure Call (RPC) service - set this to Automatic2) Windows Management Instrumentation (WMI) service - set this to Automatic also.Then, if you still get an error - post back and we'll troubleshoot some more.Just in case, you might want to try a couple of these free, online scans to ensure that nothing has slipped by your protection:http://housecall.trendmicro.com/ - *For Internet Explorer*http://uk.trendmicro-europe.com/consumer/h...call_launch.php - *For Firefox*http://www.kaspersky.com/scanforvirushttp://safety.live.com/site/en-US/default.htmhttp://security.symantec.com/sscv6/default...id=ie&venid=symhttp://www.bitdefender.com/scan8/ie.htmlhttp://www.pandasoftware.com/products/activescan.htmhttp://onlinescan.avast.com/http://support.f-secure.com/ols/start.htmlhttp://www3.ca.com/securityadvisor/virusinfo/scan.aspxTrojan scans:http://scan.sygatetech.com/pretrojanscan.htmlhttp://www.windowsecurity.com/trojanscan/trojanscan.asp

3 more replies
Answer Match 73.5%

i am getting this error when i try to install a printer -Error 1068 the dependency service or group failed to start with some searching i have come up with that it has something to do with lexbce server but when i try to start this i get an error 3 message the system cant find the path specified does anyone know how to fix this thanks for your help in this matter
 

A:Error 1068 the dependency service or group failed to start

bump
 

3 more replies
Answer Match 73.5%

Hello everyone! I finally got a new laptop after almost a year of struggling with my old one. I've had experience with using homegroup in the past and was thinking maybe I could access some of my files on my old laptop through that so I don't have to go through the trouble of manually tansferring everything via flash drive and what not.
I seem to be running into a problem though, my old laptop seems to be in its own homegroup I guess. Whenever I try to leave it, it says "windows cannot remove the computer from the homegroup". I researched the problem, and used the troubleshooter which said that the homegroup provider service wasn't started and it couldn't be fixed automatically. I tried restarting starting the service but got that error 1608 thing. To bypass this I've tried joining whichever group my old laptop is in, but it can't seem to be found even though the two are both on the same wifi/network. What can I do?
Thanks in advance!
If it matters, the new laptop is windows 8 and the one I'm having trouble with is windows 7.
 

A:Error 1608: The dependency service or group failed to start?

7 more replies
Answer Match 73.5%

I saw your posted of this problem but I can't get COMPUTER BROWSER, DHCP, NETWORK CONNECTIONS, NETWORK LOCATION AWARENESS to STARTED STATUS.
Please i really need your help. I tried to right click on each one above then click dependencies and i'm stuck here not sure what to do next..... PLEASE HELP.
 

A:Error 1068: the dependency service or group failed to start

moved from windows vista forum to network forum

For those services not started/running,
then right click on the service
then from the menu choose properties and now check the dependencies.

for each dependency entry - Check each of one of the dependencies and see which one is preventing the service from running/starting.

------------------------------------------------------------------------
Services - Fabar Service Scanner, free

If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.
We would like to see some status information for each of the services on the PC goto

http://www.technibble.com/fabar-service-scanner/

and download the free scanner tool

Theres a Direct link to the program here
http://download.bleepingcomputer.com/farbar/FSS.exe

Now "double click" on the downloaded file to run the scanner , the scanner program will now open

tick all the options. and then click on scan

the scan results will open automatically in a separate window in the notepad program.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad ... Read more

1 more replies
Answer Match 73.5%

I get cannot start the print spooler service on local computer. I have set the print spooler to automatic and started the remote procedure call manager and set it to automatic but still get error. Please help!
 

More replies
Answer Match 73.5%

Hi, i am facing error of 'the dependency service or group failed to start'. when i try to connect the LAN cable to connect to internet, its not getting detected. when i opened the network and sharing centre options, it shows above mentioned error. I tried multiple options to fix (like netsh winsock and ipreset commands, ipconfig/all in cmd) but its not working at all. Even i tried system restore but that is also not working. Please help to fix this error.

A:The dependency service or group failed to start error (win 7 ultimate)

Hi ... Welcome to the Forums ... See if the Link below helps ...
Windows could not start Error 1068: The dependency or group failed - Microsoft Community

6 more replies
Answer Match 72.24%

Hello there,
I am a Systems Engineer trying to find a fix for the 1068 error: the dependency service or group failed to start

I have looked at all the forums and previous posts with people having similar issues but none of the fixes have worked.
Resetting the TCP/IP stack has not fixed this issue & neither has system restore.

My issue has happened on 3 machines and the only connection I can find is when you connect Windows 7 Professional to a Widows 2003 Domain.

There seems to be little documentation on weather you need to upgrade the domain controllers from 2003 to 2008 before attempting to add Windows 7 into the domain.

The corruption seems to start once the machine is on the domain and Windows attempts to install any program or run windows updates which is becoming very frustrating.

I have created multiple hard drive clones so i can revert back to a working state to aid me when trying to work around this.

With these Issues outstanding I can not think about upgrading the network from XP & 2003 until these issues are fixed.

Can someone else let me know if they have had a similar problem when trying to upgrade there environment to Windows 7 and server 2008

Regards

Anton James

A:Error 1068: the dependency service or group failed to start. - Buisness Enviroment

Hi Anton,
 
Did Windows 7 joined the domain? Have you narrowed down which service failed with error 1068? The error code indicates one service's dependency service or system component
fails to start.
 
I suggest checking the following services first.
 
Check service
----------------------
1. Click Start, type Services.msc in Start Search bar, and then press Enter.

2. In the right pane, double-click Microsoft Network Inspection.
3. In the Startup type list, click Automatic, click Apply, click Start, and then click OK.

4. Also check the following services.
 
Function Discovery Resource Publication
Desktop Window Manager Session Manager
Network Connections
Network List Service
Network Location Awareness
Network Store Interface Service
Server
TCP/IP NetBIOS Helper
 
If you find any service cannot be started with the error, please let me know the service name and error exactly.
 
In addition, since the issue is related to Server. I also suggest confirming the issue with Server side.
 
Win Server Forum
http://social.technet.microsoft.com/Forums/en-US/category/windowsserver
 
Best Regards,
NikiPlease remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

19 more replies
Answer Match 70.56%

Hello,

I'm looking for assistance in solving why I can't update my Dell Latitude to Service Pack 3. The installation seems to load ok but stalls when running progams afer installation and won't complete.

Thanx

A:Service Pack 3 installation stalls and won't complete

Hi .<<The installation seems to load ok but stalls when running progams afer installation and won't complete.>>The install either completes (system reboots) or it doesn't complete...it cannot do both. Which is it?Start/My Computer/Properties...what level is displayed on the General tab?Did you consult the following link?http://support.dell.com/support/topics/glo...;l=en&s=genLouis

8 more replies
Answer Match 68.88%

My windows sec. service center is not working and I already followed numerous advices from different websites but the error still there and keeps on prompting everytime I tried to enable the windows security service center..Perhaps my laptop was infected by a virus/malware (not sure). I think my brother did something (downloading etc..) and got my laptop infected..Please help...below is my DDS as per the instruction:


DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 9.0.8112.16599 BrowserJavaVersion: 11.31.2
Run by John.Vasquez at 11:41:43 on 2015-02-11
.
============== Running Processes ================
.
C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\armsvc.exe
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files (x86)\Cisco Systems\VPN Client\cvpnd.exe
C:\Program Files (x86)\Hewlett-Packard\Shared\HPDrvMntSvc.exe
C:\Program Files (x86)\Hewlett-Packard\HP Hotkey Support\HPHotkeyMonitor.exe
C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\DAL\jhi_service.exe
C:\Program Files (x86)\HTC\Internet Pass-Through\PassThruSvr.exe
C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2015.2015.105\Bin\ccSvcHst.exe
C:\Program Files (x86)\TeamViewer\Version8\TeamViewer_Service.exe
C:\Program Files\Altiris\Altiris Agent\x86\AeXNSAgentHostSurrogate32.exe
C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\LMS\LMS.exe
C:\Program Files (x86)\Intel\Intel(R) Management Engine ... Read more

A:Error 1068:1068 error dependency service group failed start

Hello and Welcome to TSF.

If you haven't already, please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.

------------------------------------------------------

The intention of this forum is not to replace a company's IT department, nor can we anticipate alterations or configurations that may have been made to a business machine, or how it will interact with the tools commonly used in the removal of malware. Administrator access is required for control of security applications.

More than one machine could be at stake, possibly even the server. If sensitive material has been compromised by an infection, the company could be held liable.

To prevent any possible loss or corruption of company information, please inform your IT department or Supervisor when a workplace computer has been infected, immediately.

If you do not wish to proceed, stop here and let us know.

------------------------------------------------------

Please download AdwCleaner from here and save it to your desktop.Do NOT click the green 'Download' button(if visible).
Click the blue 'Download now @bleepingcomputer' button.
Run AdwCleaner and select Scan
Once the Scan is done, select Clean
Once d... Read more

2 more replies
Answer Match 68.04%

hi
can anyone help?
i have a medion akoya laptop running windows 7 64 bit
i have no audio. if i click troubleshoot problems it says the audio service is not running
it says the windows audio and endpoint builder arent working
if i go into services, windows audio is set to automatic but its not on, when i click start it says "error:1075 the dependency service does not exist or has been marked for deletion"
ive been going round in circles for ages!
also, i cant seem to play videos from youtube, but ones from other sites play (without audio)
any ideas please?
any help is appreciated, i havent had volume for months!

A:audio service not working, dependency service does not exist...

Hiya pal ... filling in your system specs in full would help immensely. There are many models in the medion akoya range Medion Akoya Drivers so It seems that you maybe don't have the latest drivers installed, but we cant steer you in the right direction without giving us the correct information

5 more replies
Answer Match 67.2%

so i woke up this morning to find my laptop unable to connect to the net via wireless, showing the following msg "Connection status unknown. The Dependency service or group failed to start." i have tried running sfc scannow and netsh winsock reset but it does nothing. and have run a virus scan on avg but no viruses show up.
I cannot also run a system restore; when i try i get the following msg "the shadow copy provider has an unexpected error while trying to process the specified operation (0x8004230F). i have tried using system restore in both safe and normal modes but nothing works.
would be great if someone could help
thanks

 

A:wireless error "the dependency service or group failed to start"

6 more replies
Answer Match 63.42%

I have an existing service that starts and runs fine. it is a vendor product that I can describe if it's relevant. It currently has no dependencies.I have added a new service (iSCSI Initiator, in case it's relevant) and I want to modify the first service so that it's dependent on the newly-added servicethanks,

A:how to add dependency to an existing service

fwiw: Based on a note from Microsoft's KB, I tried to modify the Registry entry for the service, and add a dependency value. This hosed the machine. It starts and reboots itself in 60 sec, even starting in Safe Mode. To get out of this, either destroy it, and start over, or install another copy of W2K on the same machine, and use the second copy's regedit to fix the Registry of the first copy.

2 more replies
Answer Match 62.58%

Hi,

When I attempt to open "cmd" using "Run as administrator" I am getting the following error:

C:\Windows\System32\cmd.exe
The dependency service or group failed to start.

Any advice?

Thanks.

Maro

A:Dependency or service failed to start.

AFAIK - cmd.exe has the following dependencies:

msvcrt.dll
KERNEL32.dll
USER32.dll

Have you tried running SFC.EXE /SCANNOW?

Quote:




SFC.EXE /SCANNOW
Go to Start and type in "cmd.exe" (without the quotes)
At the top of the search box, right click on the cmd.exe and select "Run as adminstrator"
In the black window that opens, type "SFC.EXE /SCANNOW" (without the quotes) and press Enter.
Let the program run and post back what it says when it's done.




If that doesn't fix it, then I'd suggest trying one of these free antimalware scans: Free Online AntiMalware Scanners
If it turns out that you're infected, please follow the steps here: NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum

1 more replies
Answer Match 62.58%

I have recently had some errors popping up on my laptop. I can no longer access any internet or network settings. It tells me the connection is unknown that a dependency or group failed to start. Kaspersky also fails to load and slows my computer down drastically.

Is there any known issues with a Windows Hotfix that would cause all these services to crap out like that? I can't see the windows update history either as all that pops up is a white screen. Any help is appreciated.
 

More replies
Answer Match 62.58%

I have a external CD ROM dirve (Shuttle)
I am using the Epat driver Whitch cam with the External Parrel CD ROmdrive it has the Drivers For Widnows NT ,Dos OS2, Windows 95
With Dos and Win 95 it works but with Nt i hvae installed it as SCSI as it says in the instructions. I restart and it dose not see it When i goto Devices and add it i get a message Could Not Start Service

the error code is 1068 The Dependency service i go in to services and it is not there
How can i manually add the Dependency service?

Thanks for any answers
 

A:{Advice Offered} - Dependency service

6 more replies
Answer Match 62.58%

I recently purchased a new computer with Windows 7 Home Premium (64-bit). I have been unable to install the printer software for my HP Photosmart Plus B209 printer. The installation grinds to a halt and returns the following error message: "The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed."

I was able to install the basic drivers for the printer but not the full printer software package. I have installed a variety of other programs (BitDefender, Mozilla Firefox and Thunderbird, Nero, TurboCad, Foxit, etc) and all installed without issues. Is this a Windows 7 problem or an HP problem. I don't think Windows Installer is incorrectly installed because it works for all other software. Supposedly this software is Windows 7 compatible. Any ideas what is causing this problem and how to fix it?

Shrimpman
 

A:Solved: Windows Installer Service Can't Be Accessed in printer installation

9 more replies
Answer Match 61.74%

If you are receiving the notification: Connection status: Unknown Dependency service or group failed to start; and you are running Vista and using Trend Micro for virus protection, then a fix is available for your problem. The problem is that Trend Micro mistakenly identified a Windows service, Network Location Awareness service, as a virus and altered the service to protect the system. I have written up the fix on my blog. I wrote after I found the same problem on 2 PCs in one week and spent hours looking for a fix. Consider It Fixed: The Dependency Service or Group Failed to Start Best, nrwater Consider It Fixed

More replies
Answer Match 61.74%

Hi

Like many I'm trying to upgrade Vista to Windows 7. I ran the Win 7 system readiness tool and the only thing outstanding was SP1. In common with many I could not instal SP1. I tried all the fixes including Chkdsk and SFC Scanow etc and the result is that I have no internet access with the above message next to the network icon.

I've tried restting the TCP/IP stack in a command window (restore .net...winsock..) but still the same message. I understand it could be due to a corrupt file in the sytem 32 folder and there is a fix involving taking ownership and deleting that. Has anyone tried that?

Is there anything else I can try to get internet back short of a clean instal?

Many thanks

A:The dependency service or group failed to start

Download and install the Windows 7 Network Adaptor drivers from the manufacturers site.

What is the make and model of you laptop?
Dave

7 more replies
Answer Match 61.74%

Let me try to give as much info as I can to start. Running Windows 7 64bit Ultimate have all updates as of 01-16-2012. Recently had some malware that I removed not sure if there is a correlation. I am trying to connect my wireless connection on my pc to a router to run xbox and BD player. So I connect to my wireless network have my network card plugged into my router, connected to both networks. I go to properties on wireless connection click sharing tab check allow other network users to connect to the internet through this computer connection, also checked allow other network users to control or disable the shared internet connection. I click ok and get a error window that says in the title bar Network Connections the body of the window says, "An error occurred while Internet Connection Sharing was being enabled. The dependency service does not exist or has been marked for deletion. I looked through services and device manager in non pnp drivers everything looks right to me... I am not super familiar with networking issues so I may have missed or overlooked something easily. Searched the internet for answers could not find anything that would resolve my issue. So I am posting here for some help resolving this issue. Help would be appreciated thanks in advance!
 

A:ICS dependency service does not exist or has been marked for deletion

14 more replies
Answer Match 61.74%

Hello everybody, firstly i'd like to thank you guys in advance if you're able to help me with this very VERY annoying problem.

I've been working on my laptop recently, once finished i turned my computer off like most people do.
After turning it back on hours later, i noticed that my laptop was connected to the internet router but had limited access which ment i could'nt get onto the internet ! So using my brain i went onto the control panel > network and sharing center and nothing came up apart from ''the dependency service or group failed to start'' ...

PS: I am running windows 7 on an ASUS laptop.

Please help guys!
 

A:The dependency service or group failed to start

12 more replies
Answer Match 61.74%

I have a HP Pavilion a6400f desktop running Vista Home Premium and IE7 as browser.
After a blue screen crash, the system recover itself, but has since then been unable to connect to the internet or to my network. I get the red X in the lower right side corner of the screen. When I point to it says "Connection status: unknown
the dependency service or group fail to start."
When I click Diagnose and repair, a window comes up saying "network diagnostics cannot run because the diagnostics Policy service is not running."
Then, I opened the service control Manager and try to start the DPS manually, but i get Windows could not start the service on Local Computer. Error 5: Access is denied.
I've tried several fixes posted on this and other forums, but without luck, so any new ideas will be very appreciated.

A:Dependency service or group fail to start

Go back into time with system restore. It should work

5 more replies
Answer Match 61.74%

Well, I'm currently on another computer trying to fix my laptop. I can't use system restore to solve the problem because it won't complete. I've run system scans and there's no corrupt system files as far as windows can tell.

So the network and sharing center (basic network and set up connections) shows up as unknown the dependency service or group failed to start! That and my wired and wireless internet doesn't work. SSID of different networks will show up, but connecting to any one I own or can access will show limited connectivity.

But connecting it directly to my Western myBook (which uses gigabit connection) works, so it doesn't seem to be any hardware problems.
This all happened after I went far away to visit family and friends in a different country and plugged in a really sketchy looking network wire. That and ISATAP adapter #3 popped up ever since I had this problem. never saw it in device manager before this happened.

Any help would be appreciated thanks.

A:The Dependency service or group failed to start!

Hey,
I was going to make a new thread for this, but I might as well post it here. I recently serviced a computer with the Interpol/Moneygram virus on it (some new version which packs a bit of a bite, let me tell you). Anyways, After scanning, removing, repairing, updating, etc, I still could not get the WiFi to work. The problem was that dozens and dozens of Windows services had been disabled. I eventually just broke down and did a system restore, which fixed everything, but I still have this one question: Since I was able to get Ethernet LAN working, but no Internet access on the WLAN, what Windows service does WLAN depend on that Ethernet LAN does not?

Anyways, enough thread hijacking.

Here is a good start Kurohyou: Go to Start, then in the search box, type services. You should see it pop up. Once its open, find the services at the bottom called Wired Autoconfig and WLAN Autoconfig. Set them to Automatic startup, and start them each. In my case, this failed, and I received the same message as you, that "The dependency service or group failed to start" with error number 1058 or 1065 (I should know, ive been looking at it all day lol).

Anyways, when that happens, go to the tab of the service in question that says Dependencies. Expand the trees to view every service that this service depends upon. you will need to enable those services as well in order for that service to start. This will be a tedious process and by the end of it you will be a master of Windows s... Read more

1 more replies
Answer Match 61.74%

Hi

Like many I'm trying to upgrade Vista to Windows 7. I ran the Win 7 system readiness tool and the only thing outstanding was SP1. In common with many I could not instal SP1. I tried all the fixes including Chkdsk and SFC Scanow etc and the result is that I have no internet access with the above message next to the network icon.

I've tried restting the TCP/IP stack in a command window (restore .net...winsock..) but still the same message. I understand it could be due to a corrupt file in the sytem 32 folder and there is a fix involving taking ownership and deleting that. Has anyone tried that?

Is there anything else I can try to get internet back short of a clean instal?

Many thanks
 

A:The dependency service or group failed to start

11 more replies
Answer Match 61.74%

Hi, I am having problem with my laptop.... The network center says The dependency service or group failed to start... I use a windows vista Home Premium with service pack 1.... plz help

A:Dependency service group failed to start

There's a couple of things that you can try and both are done as an administrator from the cmd prompt pressing Enter after each.

Go Start - All Programs - Accessories then right click on Command Prompt and select Run as administrator.

First one - type -

netsh winsock reset catalog

exit

Reboot computer.

This is Jenae's workaround which has also proven successful -

net localgroup Administrators /add networkservice

net localgroup Administrators /add localservice

exit

Reboot computer and let us know how you get on.

19 more replies
Answer Match 61.74%

I'm going to start off by apologizing for typos and sloppy grammar because I'm on a phone so I just cannot be bothered.

yesterday my computer blue screened. nothing out of the ordinary. a month ago I reinstalled my os because my laptop would crash every few hours. reinstall foxed the provlem but I still crash here and there. so the bluescreen auto restarts my computer after the memory dump or whatever and then crashes again while windows is starting. this has happened before so I restart, boot as normal, same thing. then I try starting in safe mode because that wprked last time this happened. crash while it is starting. try again, same thing. then I tried startup recovery and it freezes during that. I gave up after this and turned my laptop off for about 30 minutes while I went to eat my feelings. I come back, turn it on, and it works. the only problem is the wifi no lpnger works. I put on a movie and went tp bed because I was tired, sort of hoping that the prpblem would fix itself. it didn't. I can see the networks in the list and I have connected to mine but it says limited access. in metwork and sharing it says unknown where the little map would usually be and under that it says dependency service or groupfailed to start. I've gone to several different threads on here and nothing helped so I decided to make my own.

my laptpp is an alienware m17x r4. I think my network card is intel centrino wireless n 2230 if that helps.

oh and after the reinstall I didn't have an... Read more

A:The dependency service or group failed to start

Welcome to Seven Forums,

One thing that we need to verify first and foremost.... is your computer still crashing or giving you the bluescreen?

For the Wi-Fi issue, run the Intel utility to detect your Intel drivers (including your Wi-Fi). If it finds, follow the procedure to download and update the most current driver.

1 more replies
Answer Match 61.74%

Ok first off sorry if this is in the wrong thread, i have been reading the threads related to this problem and can't figure out a solution. Last night I could not get on to the internet, it said the Dependency service or group failed to start I ran sfc /scannow as an administrator and it came back with nothing wrong. I have Kaspersky 7.0 and it has a yellow yield sign on it. The network icon has a n x through it, I do always update the system when the icon appears. Any help would be appreciated.

A:Dependency service or group failed to start

1.Try update driver for network card
2.If point 1 no help check in eventvwr.msc in Application and System section all error messages which concern these services->Windows Vista Service Pack 1 Services Information - Wired AutoConfig

1 more replies
Answer Match 61.74%

I am having this problem and it started one day when I booted up my PC. I tried resetting the router, modem, a new cable, using netsh winsock reset catalog (reset winsock entries), netsh int ip reset reset.log hit (reset TCP/IP stack)
and none of it has helped. I have updated all the drivers for my motherboard, which is a gigabyte GA-Z68XP-UD3P. On the lan connections I am getting a solid orange light,1000ms connection, and a flashing yellow light which means data is being received and sending (This is in the manual). I have used the program, Realtek-Ethernet Diagnostic Utility which gives me some information that I put as attachments, I'm not sure how to post SS's when the insert picture button ask for a URL. I also posted the Ipconfig which brought back some weird results. I am not sure where to go from here and any help would be great.

A:The Dependency service or group failed to start.

Have you tried restoring to a previous point before you started having these problems?

5 more replies
Answer Match 61.74%

Hi
I have a HP Pavilion g6 laptop and last night, after restarting it when the screen froze, it claimed that "no connections are available" when it was connected only minutes ago. I opened the Network and Sharing Center and where the Network Map should be, it says 'unknown' with the words "the dependency service or group failed to start" underneath. I've resulted to using my IPhone to find solutions and I followed a thread on this website that spoke of my same problem but midway through I got stuck once again. I've done the sfc /scannow on the command prompt and it found no problems or violations. I've noticed that a number of the services listed in that thread have stopped and it won't allow me to start them. Since that thread is pretty old I'm creating my own. I'm freaking out so please can someone help ASAP???!!!

Here's a link to the thread for reference::
the dependency service or group failed to start

A:Dependency service or group failed to start??HELP

Welcome to Seven Forums,

I have posted in that Thread. I'd try a System Restore and choose a restore point when your computer was able to connect to the internet. This is easier task to start with and see if it helps, if not please follow all the suggestions in that Thread that I have posted.

An update will be appreciated.

1 more replies
Answer Match 61.74%

Before you say search, I have looked almost everywhere for a solution!

Basically, last night my internet auto shut-off because it ran out of battery. Didn't give me a warning or anything, just turned off. So I turned it back on automatically and then it started BSODing. So I thought I'll leave it and just sort out it in the morning.

I then started getting the error of the "Remote Procedure Call" and then it wanting to restart. I did all the workarounds so now I can fully access my computer. BUT, when I try to go to System Restore, I can pick my Restore Point, but when it gives the warning about shutting down all other programs, it just sits there. I click next several times but it stays the same.

For some reason, I can't connect to the internet, either. I think my Drivers are disabled so I try go to services.msc and enabling them, but I get the error: "The dependency group or service failed to start" or something about Plug n Play. I then try to enable plug and play but I get info that "the file specified could not be found". The file it's trying to find is vrt11.tmp which is apparently a virus according to the net.

I've been at this prob for ages and I have no idea what to do... any help?

A:The dependency group or service failed to start

sounds like you are using a laptop.....at this point you might consider reloading Windows XP or try doing a xp recovery ..assuming you have the restore CD.
if you reload xp you will lose all your data files so you should save them to a CD or to an external harddrive before reloading Windows xp.

post back with results and good luck

4 more replies
Answer Match 61.74%

I have a Toshiba satellite and have been unable to access the internet and have Dependency service or group failed to start . Having read some earlier post i went through the process of running the scan on SFC/scannow it has come up with no errors E.g No integrity violations.
Any other ideas

Thanks
LR

More replies
Answer Match 61.74%

I'm running Windows XP x64 SP2, and things have been running swimmingly up until recently when I decided to update my Avast installation to the 2014 version. The background service for it refuses to start due to a service dependency. A while back I disabled a bunch of services with the aid of these configs from BlackViper to increase performance and decrease resource usage. I also made a few tweaks of my own that weren't in the guide. Anyway, the point is, I disabled some service that Avast 2014 requires, and I need to figure out which one it is so I can re-enable it. I even set all of my disabled services to "manual" in the hopes that the service I needed would be triggered by the Avast service, but this was to no avail.
Anyhow, here's my list of services. I hope the editing on it is alright, since I had to realign and clean up some of the text.
 

Name Status Startup Type
.NET Runtime Optimization Service v2.0.50727_x64 Manual
.NET Runtime Optimization Service v2.0.50727_X86 Manual
Adobe Flash Player Update Service Manual
Alerter Manual
Application Experience Lookup Service Manual
Application Layer Gateway Service Started Manual
Application Management Manual
ASP.NET State Service Manual
Ati HotKey Poller Manual
avast! Antivirus Automatic
ClipBook Manual
COM+ Event System Started Manual
COM+ System Application Manual
Computer Browser Started Manual
Cry... Read more

A:Avast 2014 won't start due to a service dependency

Before starting digging through each of these services. . . have you tried removing Avast and reinstalling it? If the service in question is installed by Avast, that should fix the problem.EDIT: Actually, a question I should have asked first. What error message do you get that tells you that a service dependency is preventing Avast from starting? (Exact text please).

1 more replies
Answer Match 61.74%

Sony Windows Vista SP1
Network icon in toolbar at the right bottom gone, can see in safe mode with red X.
Network and sharing center- The dependency service or group failed to start.
Network discovery- off
Network Location Awareness- Automatic, status- blank, giving me error to start- Error 1079 The account specified for this service is different from the account specified for other services running in the same process.
Event Viewer
System-- Error 7000, 7001
Application-- Error CAP12 11,  SideBySide 33, Warning WMI 63, System Restore 8210 8193, VSS 34
 
 
Before I had number of errors, firewall was corrupted, in manage connections there was no icons for LAN and Wireless, already performed Windows repair from tweaking.com and firewall repair, SFC scannow and many more. antivirus scan done.
 
Appreciate any help to resolve this issue.
Thanks.
 

A:The dependency service or group failed to start

Network Discovery is "ON" now in Network and Sharing Center, after I  checked on network discovery box in firewall exceptions.
 
Rest of issues still exist, 

3 more replies
Answer Match 61.74%

Hi All
Was going to ask for advice to help me instal SP1 prior to upgrading to Win 7 but now I have another, more pressing problem.

In attempting the various workarounds for SP1 I ran SFC/scnow and Chkdsk. When I ran the latter it identified various errors on the disk that it couldn't fix and suggested using the f fixit function which I duly did.

After restarting I found that I had lost internetaccess. When you hover over the icon you get the message above. I've done some research and tried running the Netsh Winsock Reset line at the command prompt but to no joy. I've also tried systemrestore but when I try this I am told that there are no retore points!

I've checked the newtork drivers in Device Manager but I think they're fine (Intel 82566DC-2).

Sorry this is so long but you can probably tell I'm desperate. I'm only able to use the net as I dual boot and thankfully good ole XP is working fine as usual.
I'd really appreciate any advice or fixes for this.

I wonder if I've trashed my TCP/IP settings how do I reset them without reinstalling Vista?

Many thanks

Simon

A:The dependency service or group failed to start

Hi
Update. Tried Netsh malarkey again to reset "stack" but no good.
Also tried repair on Vista CD but no good.

Unable to try repair by pressing F8 as I'm asked for password which I don't know and didn't create.

I just can't conceive how such a catastrophic failure can have occurred when only using Windows tools!

1 more replies
Answer Match 61.74%

Originally Posted by Latii


Hello everyone,
I'm new here and I really need help with this, I did check around for help but nothing seems like it fits with what I'm going through
I have a HP laptop with Windows vista home edition, and this has never happened to me. It started today, in which I thought it was nothing. I'm a little worried to be honest and I don't know what's wrong with my connection. I can access the internet on my mother computer which is a desktop, yet I can't on my HP laptop. it says "The Dependency Service or Group Failed to Start" ??
help!



p.s. I don't know how to move my other thread to this one

A:The Dependency Service or Group Failed to Start

well I tried to sfc /scannow and all that sort but no luck at all
I even looked around and still wont work, I tried to go into the service control manager.. nothing?

edited:
In the Services section I clicked on internet connection sharing (ICS) to start the service because it says "stopped" and it tells me "Error 1068: dependency service or group failed to start." Windows could not start the internet connection sharing (ISC) service on local computer?

Network Location Awareness will not start as well "Service status: stopped"
says:
Windows could not start the Network Location Awareness on local computer. For more information, review the system event log. if this is a non-microsoft service, contact service vendor, and refer to service-specific error code..."

14 more replies
Answer Match 61.74%

I have this issue where when you open Network and Sharing Center it says the dependency service or group failed to start I tried almost everything and nothing worked.
The internet works with my computer but it has the limited symbol 

A:The Dependency service or group failed to start

I am reseting my PC 

12 more replies
Answer Match 61.74%

i m using windows8 on my vaio notebook....i got my lcd screen repaired just 2 days ago...after that i m trying to access internet but m unable to do it....whn i mouseover to LAN icon theres appear exclamation sign and it says internet acess but when i click on it says limited acess......upto now i tried all my effort-restoring laptop,troublesooting ,reinstalling ethernet driver,etc.....when i open network and sharing center there says -unknown and down to that says the dependency service or group failed to start.......then i tried to change adapter settings n unmarked ipv6 protocol but also same problem...... pls pls reply to me n help me ...Thank you in advance
 

More replies
Answer Match 61.74%

Hi,
i am facing this problem for a couple of weeks . when i try to connect to the internet using wi-fi, it says limited access. on opening network and sharing center, under the "View your basic network information and set up connections" heading, it says "unknown", where it used to show the network map before this problem happened, and underneath that it says "The dependency service or group failed to start".

any idea on whats going on

Thanx in advance.

A:the dependency service or group failed to start

From what I read about this problem it seems that a corrupted TCP/ip stack may be involved.

Try running this batch file which will reset winsock, reset the TCP/IP stack and release renew your IP.

Download Renew IP + Reset Winsock Batch File

If that doesn't fix the problem please post a screen shot of your ipconfig /all .

9 more replies
Answer Match 61.74%

Hi all,

Dont know where to start with this one.

A mate asked me to have a look at his laptop (HP dv4-1000ea) which is getting the following message 'Dependency service or group failed to start'.

I ran a scan for viruses and spyware etc using superantispyware and malwarebytes and found a few which have been taken off successfully.

Now the message is still there, it will not allow me to connect to the internet.

Also, i don't know whether this has anything to do with it or not, i can't do a system restore to an earlier point, as i was told to try this.

I have tried the sfc /scannow option from cmd, but that comes back with no errors.

Anyone got any ideas of which way i have to go with this, any ideas would be very helpfull.

More replies
Answer Match 61.74%

Hi guys,

Hopefully one of you can help me.

Was playing a game yesterday, and it froze on me and I had to do a hard reboot. Afterwards, I noticed a big red X through my network icon. Hovering over it, it tells me 'dependency service or group failed to start' and when I try to diagnose it, it tells me there is no network adapter installed or configured. It basically acts like no network is there at all. Now it seems after hours of googling and reading a ton of forums that this is a pretty common issue, with a bunch of suggested fixes: I've tried all I can find, and none seem to work! =(

I'm running Vista Home Premium, and so far I've tried:

*Running virus scans

*Using system restore to return to an earlier point.

*Installing SP2

*Going into command and doing 'netsh winsock reset' and 'netsh int ip reset' The first seems to work, but the 2nd tells me 'There's no user specified settings to be reset'

*Going into command and doing 'sfc /scannow' Which finds errors but doesn't fix them.

*Replacing nlasvc.dll in system32

*Doing some registry edit involving Spooler

*Reinstalling network card

*Buying entirely new network card

*And a bunch of other small things I can't remember
I'm entirely at a loss, and don't own a Vista disc to try and reinstall (PC shipped with Vista), and can't repair using the Recovery CD as I somehow have no backups either. So maybe there's someone ... Read more

A:dependency service or group failed to start

10 more replies
Answer Match 61.74%

turned on my laptop and i cant find any connection are available .
When i open network and sharing centre, it said " the dependency service or group failed to start"
The attachment of picture is the result of troubleshoot.
How could i solve this problem? Thanks so very much ^^
 

More replies
Answer Match 61.74%

Hey
I have a HP Presario F500 and yesterday, when i tried to connect to the internet through an ethernet cable (my wireless stopped working a while ago) it didn't work. I checked out the internet status and i got a message saying "dependency service or group failed to start, connection status: unknown"
I tried troubleshooting it but it said that it can't do it because the Network Diagnostic Policy hasn't been started and when I try to start it I get another error message saying "error 1114, dynamic link library unable to initialize",
I've tried both "netsg winsock reset" and "scf/ scannow" but neither worked.
Some-one help me please!
Thanks

Jess

A:Dependency service or group failed to start

Hello,
I had the same thing with my laptop.. sadly there was nothing I could do and I had to restart it all over again.. but maybe there is another way?

1 more replies
Answer Match 61.74%

Hello thereMy current OS specsWindows Vista Home Premium 32-bit service pack 2 My problemwhen I try to open .doc (MS Word) files and .wps (MS Works Wordprocessor) files I get an error that reads Dependency service or group failed to start. Other files are opening normally (notepad files, pdfs, open office docs, ms works spreadsheets etc). What I've tried already to fix itI tried Run > services.msc but I got the dependency error again. When this all beganI did have some type of virus or other corruption recently, at this time whenever I would doubleclick a file a window would open asking me to choose which program to open it with. However, I ran a system restore, and no longer had that particular issue. I don't know if the current error I'm getting could be related to that issue, or if there is anything I can do to fix the dependency error other than through services.msc. Any advice on this would be highly appreciated, thanks!

A:Dependency service or group failed to start

Hello,And welcome to BleepingComputer.com, before we can assist you with your question of: Am I infected? You will need to perform the following tasks and post the logs of each if you can.Malwarebytes Anti-MalwarePlease download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Full Scan"... Read more

3 more replies
Answer Match 61.74%

Dear sir,

I bought a new acer Laptop from FlipKart.com, I installed Windows 7 and used. after few days ago, it's not wake up from Sleeping and Hibernate.

Now I am trying to Install Windows 10 Pro. When Complete Installation and windows first time booting, I getting a Blue screen error from the first booting.

Stuck from this blue screen error:

Your PC ran into a problem and needs to restart. We are just collecting some error info, and then we'll restart for you. (100% complete)

If you'd like to know more, you can search online later for this error : 0x000001d3
My Laptop Info:
Aspire E15

Model Name: E5-573-32JT

Part Number: NX.MVHSI.043
Intel® Core? i3-5005U processor Dual-core 2 GHz
39.6 cm (15.6") HD (1366 x 768) 16:9
Intel® HD 5500 with Shared Memory
4 GB, DDR3L SDRAM
1 TB HDD
Also I want This Laptop's Drivers for Windows (7, 8, 8.1 and 10 )
I am not find any Drivers for This Laptop from: http://www.acer.com/ac/en/IN/content/drivers
 

A:Can't Complete Windows 10 Installation-Error from First boot

I bought a new acer Laptop from FlipKart.com, I installed Windows 7 and used. after few days ago, it's not wake up from Sleeping and Hibernate.
Now I am trying to Install Windows 10 Pro. When Complete Installation and windows first time booting, I getting a Blue screen error from the first booting.Click to expand...

Where and how did you obtain Windows 7 and Windows 10 Pro to install in that laptop?
Aspire E15
Model Name: E5-573-32JT
Part Number: NX.MVHSI.043Click to expand...

What's the exact SNID number and serial number on that Acer Aspire E5-573-32JT laptop?
What country was it purchased in?

It appears that model laptop came with a Linux operating system.
It appears to have full driver support for Windows 8.1 64-bit and Windows 10 64-bit.

--------------------------------------------------------------
 

1 more replies
Answer Match 61.32%

Hello everybody, firstly i'd like to thank you guys in advance if you're able to help me with this annoying problem.

I've been working on my laptop recently, once finished i turned my computer off like most people do.
After turning it back on hours later, i noticed that my laptop was connected to the internet router but had limited access which ment i could'nt get onto the internet ! So when I went onto Network and sharing center and nothing came up apart from ''the dependency service or group failed to start'' ...
I don't want to use system restore or reset tools of windows

Current OS: Windows 8 PRO
Model: ASUS K43SV

 

A:Solved: The dependency service or group failed to start

After turning it back on hours later, i noticed that my laptop was connected to the internet router but had limited access which ment i could'nt get onto the internet ! So when I went onto Network and sharing center and nothing came up apart from ''the dependency service or group failed to start'' ...Click to expand...

aere you able to get connected to the network at all - or is in this state now all the time?

What firewall / security suite or anti-virus do you currently have on the PC - or you have ever had on the PC in the past - any trial ware - like Norton, kaspersky or Mcafee or any free security suites like zonealarm, AVG , Webroot etc

lets see the following please

ipconfig /all
xirrus screen shot

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the infomation above those entries
... Read more

1 more replies
Answer Match 61.32%
A:The dependency service or group failed to start probelm

Hello,

Have you tried a System Restore and try restoring your computer to a point before this problem started?
System Restore - Microsoft Windows

3 more replies
Answer Match 61.32%

First, I want to mention that this isn't a network problem like absolutely everyone else online. I get this error when trying to run most applications on my computer. Some get it when I run in administrator mode as well, such as the CMD. It doesn't happen right away, but when my PC is up for a undetermined amount of time, it triggers, and the following problems occur:

- Start menu may or may not respond to my actions (When the start menu is open)

- Adobe Plug-in crashes on Youtube after a 30-second wait.

- If I wait long enough explorer.exe will crash and I will be stuck using Alt-Tab and Task Manager.

I've run malware scans with Spybot, Anti-Malware Malware Bytes, and SUPERAntiSpyware free edition, so I am at a loss. If you guys know whats up or what I should do, then please reply. :)

-Phobos001 (I know it says Phobos002, but Phobos001 'didn't meet the standards', apparently, and I don't remember registering to this site before.)

A:[SOLVED] The dependency group or service failed to start

Hi, usually a permissions problem in the registry reads "local service not "NT authority/service" as far as we can determine the SID is changed from "current" this is difficult to sort. Firstly you need all updates installed. It has been possible in some instances to fix this by changing to a new user account OR by running a very complicated repair of permissions.

Now you might find this workaround will do it for you so try this first:-

Go to start ,all programs, accessories and right click on command prompt select "run as administrator" at the prompt:-


Code:
net localgroup Administrators /add networkservice
press enter then type:
net localgroup Administrators /add localservice
press enter then type:
exit
press enter and restart your computer
It is also some times necessary to "add the user" so

net localgroup administrators <my_user> /add

Note:- My user is Paul so the command is:-

net localgroup administrators Paul /add press enter.

Do not worry if it returns the user is already a member of this group.
Let us know how you get on.

2 more replies
Answer Match 61.32%

Hi there,

This morning I turned on my PC, which was functioning perfectly fine the day before, and saw it had a red 'X' on the network connection. The Network & Sharing center said 'The dependency service or group failed to start'".

At this point I uninstalled the last program I installed, bitcasa, especially since it was network attached storage in the cloud, so I assumed it could be causing problems. After a reboot, that didn't help.

I went into services.msc and tried to manually start the 'Network List Service', but it threw up the same error, with the code 1068. I tried to start some of the services that it depends on, I think it was the DHCP something, but it said "Error 5: Access Denied".
Furthermore, I did some basic troubleshooting stuff which I will cover below and was hit with the error message "The diagnostics policy service is not running'.

Here's stuff I tried:
Malwarebytes scan (was clean)
Basic troubleshooting (was useless)
Uninstalled bitcasa
Rebooted
SFC Scan (came back fine)

So, have you any idea what I can do to fix this? Here's a list of things I have compiled that I will attempt when I get home:

-Safe mode with networking
-Uninstall one other suspect program
-Turn on all services related to networking (or at least attempt to)
-Re-install motherboard network adaptors / drivers

Thanks in advance. I really need to solve this as quick as possible so unless you superstars have any awesome tricks that can fix this, I may just do ... Read more

A:Red 'X' Network - 'The dependency service or group failed to start'

Hi everyone,

I believe the issue is fixed. I did two things:

1) Typed the commands:
net localgroup administrators localservice /add
net localgroup administrators networkservice /add
exit

Then my internet was restored but the Firewall had been suspiciously disabled, and unable to start.

I ran ComboFix as suggested by other users. And voila, it would appear the internet works and the firewall is running.

Is there anyone that thinks all is not well still, and I should do something else?

Thanks.

1 more replies
Answer Match 61.32%

Hiya.

I am typing this from my laptop using wifi at the same home that my PC is having trouble identifying a network. It has a pop up for turning on windows firewall, when I try that, it says "action center can't turn on windows firewall", trying to turn it on manually runs me in circles. When I hit use recommended settings, it tells me it can not change some of my settings. Error code 0x8007042c.

In my network and sharing center, it can not identify a network. It says "dependency service or group failed to start".

I have to run right now. If anybody needs any more information, please tell me what I need to do and I should post back tonight or tomorrow afternoon. I'd love if anyone could contribute!

Thanks a lot,
Nick

A:Dependency service failed to start. No internet access.

Hi Nickmaho and welcome to Seven Forums:

There could be more than just the service so try what is posted on this please and post back. Try the service's first and then try what is recommended here. Hope this helps
Windows firewall can&#39;t change some of your settings Error code - Microsoft Community

4 more replies
Answer Match 60.9%

I have previously Installed The Sims Complete Collection on this computer. It worked just fine. I uninstalled it for awhile and now, upon reinstalling, I can't.
When it gets to needing the second disk, I put it in, click OK and it loads for a bit. Then a Setup folder pops up with a WinRAR archive in it. I click on that and get an error message of :

D:\Setup\data3.cab
The archive is either in unknown format or damaged.

Since its successfully installed before, why is it having trouble now?
 

A:The Sims Complete Collection Installation Error at Disk 2

maybe the disk is scratched or something or perhaps the game did not uninstall compleatly the first time.
 

2 more replies
Answer Match 60.9%

This has been happening to me I have kaspersky and have ran scans and all of that sort and no Virus. I have 2GB memory duo core CPU ill attach DxDiag file. I am also getting random crashes blue screen stop messages. Can someone please help me on what I should do to fix this.

Thanks

A:Error "insufficient System Resources Exist To Complete The Requested Service"

What service might that be...that's running when you get this message? What program?You might take a look at a similar query, http://www.bleepingcomputer.com/forums/t/49537/error-insufficient-system-resources-exist-to-complete-the-requested-service/Louis

3 more replies
Answer Match 60.9%

Hi,

I am experiencing an interesting problem with system resources in Windows XP which, quite frankly, is driving me mad!!!

I leave my PC on for days and lately, after being on for about a day it would give me an error:
"insufficient system resources exist to complete the requested service" when I try to open any program such as Mozilla firefox, iTunes, etc... My whole computer becomes useless as nothing seems to work, not even task manager. The only thing I can do is reboot, and the whole thing happens again after being on for a certain amount of time.

My computer specs: 3.2 ghz, 2 X 160 GB SATA in RAID 0 (1 newly installed), 1gb of RAM, Dell Dimension 8400.
I have enough memory, so I don't know what's up. I scanned my computer already and nothing comes up.

I'm getting so frustrated having to reboot, and coming back after a long day and finding my computer completely unfunctional.

Can someone please help me?

A:Error "insufficient System Resources Exist To Complete The Requested Service"

Have you updated, and run your antivirus?Have you run any Spyware/Malware programs?What Spyware/Malware programs do you use?Are you using these basic security programs?(They're all free.)a? freeewido security suiteAd-AwareSpybot S&DSpywareblasterSpywareGuard

12 more replies
Answer Match 60.48%

Hi I have recently found a computer in a skip SCORE! It works and all but I want to get internet and when I open the network and sharing center it says "The dependency service or group has failed to start" I found this post
http://http://www.sevenforums.com/network-sharing/130159-dependency-service-group-failed-start.html
and followed the advice given but I encountered several differences in the problem.

When I tried sfc scan and ipconfig I got these results.
When I looked at services these ones weren't started.
DHPC Client: said, error 5: access denied
Network Location Awareness: came up with this error message
Please help I am a poor student and cannot afford to buy new OS .

A:Network Problem: The Dependency service or group failed to start.

Hi zac and Welcome to Seven Forums,

Please check your computer's Device Manager and locate Network Adapters then see if there's any symbol - ? X or ! on it.

If everything looks good in your Device Manager, you might want to run Check Disk





Quote:
.
Open the "Computer" window
Right-click on the drive in question
Select the "Tools" tab
In the Error-checking area, click <Check Now>.

4 more replies
Answer Match 60.48%

Recently, i got a trojan virus, and i deleted a few files, and then it was fixed. BUT the only thingo that was still stuffed was that the little wireless sign on the bottom righthand corner of my screen still displays 'the dependency service or group failed to start' EVEN THOUGH my connection is fine. I am currently talking with u guys . Also, when i try to connect to other networks, it says that it WAS connected but i could not access the internet (ALSO) EVEN THOUGH I AM STILL TALKING WITH YOU GUYS RIGHT NOW. PLEASE SOMEONE HELP!!!

ALSO:
I've tried the sfc /scannow thingo but all it says is that there were problems with the system thatcould not be fixed. It says to refer the the CBS.log. Ok, i try to access it but it says access denied. WTF??? please help!

A:HELP!!! stuffed up connection with 'the dependency service or group failed to start'

If you are receiving the notification: Connection status: Unknown Dependency service or group failed to start; and you are running Vista and using Trend Micro for virus protection, then a fix is available for your problem. The problem is that Trend Micro mistakenly identified a Windows service, Network Location Awareness service, as a virus and altered the service to protect the system. I have written up the fix on my blog. I wrote after I found the same problem on 2 PCs in one week and spent hours looking for a fix. Consider It Fixed: The Dependency Service or Group Failed to Start Best, nrwater Consider It Fixed

1 more replies
Answer Match 60.48%

Hi everyone!

I'm having a pretty big problem on my laptop- I can't connect to the internet and when I try to connect in the network and sharing centre it simply says 'The dependency service or group failed to start' and I am unable to connect to the internet (Using wi-fi).

There's a lot more to it than that though.

Simply put, here is a list of the problems I am facing:
1. Can't connect to the Internet
2. Cannot change theme, stuck in basic (Themes are grey and do not respond when I click on them in the control panel)
3. Overall brightness of laptop screen has decreased.
4. When opening my anti-virus software (avast) it says that the software is off and I should click the fix now button to turn it on. However, when I click on it nothing happens.


Please note that this problem occurred when I was messing around with command prompt ( I booted windows 7, pressed F8 and tried to check weather I could launch a USB program through safe mode- command prompt). I figured out I had no idea what the commands were and tried using one of the few commands I knew- ms config. I may have changed settings there and this could be how it happened, I'm not really sure.

Thanks in advance to anyone who responds! (Keep in mind, I'm not very experienced with command prompt but have full knowledge of control panel options, computer, etc.)

A:The dependency service or group failed to start- Command Prompt

To me sounds like a virus or some malware got into your laptop.






Quote:
tried to check weather I could launch a USB program through safe mode


What kind of program was that.

Try running your AV in safe mode.

9 more replies
Answer Match 60.48%

Hello I just started having this problem. First off I own a dell xps 15 l502x.

It all happened after I unexpectedly shutdown the computer after having it on for almost 13 hours.
I turned my computer on, it booted up fine but I could not connect to any wifi network. Connecting with Ethernet did not help, a glance at device manager showed a yellow mark on the network adapter and isatap.
I decided to reinstall the wifi driver and now it connects to the wifi with limited access.
I could not get network diagnostic policy to run and trying from services to start it gives me an error 5 access denied.
In network and sharing it shows connection as unknown and the problem stated in the title.
So I do not believe it is a hardware issue, it must be software and has to be related to services because when i opened itunes, it asked me to self recover itunes service to sync. I also had to reinstall Norton because it was not starting.
I have no idea on how to fix this, can someone please help me on this dilemma. Thank You

A:Not connect to internet:Dependency group or service failed to start

Hi can you please disable the isatap adapter it is not required for internet access.

Also can you please verify that all your Network Services are Started.
Click on Start, type services.msc then press enter.

• COM+ Event System (for WZC issues)
• Computer Browser
• DHCP Client
• DNS Client
• Network Connections
• Network Location Awareness
• Remote Procedure Call (RPC)
• Server
• TCP/IP Netbios helper
• Wired Autoconfig is set to manual.
• Wireless Zero Configuration ( XP wireless configurations only)
• WLAN AutoConfig ( Vista/7 wireless configurations only)
• Workstation

Also can you please post an ipconfig /all for review please.

Also can you download xirrus from the link below and post a screenshot please.

Wi-Fi Inspector | Xirrus

9 more replies
Answer Match 60.48%

Hello, MicroSoft tech crew. I know my issue is not something new to you, there are earlier posts with similar to identical problems to mine. For a whole day I tried everything I could find on the internet to fix my issue, but nothing seemed to work.
I cannot connect to the internet. My network and sharing center displays the following, instead of the map:
Unknown
The dependency service or group failed to start.

I am running windows 7 Professional 64-bit.
I used ESET NOD32 as antivirus. I uninstalled it the day this issue appeared.
I have no restore point.
Any other computer or device can successfully connect to my router.
Re-installing a fresh copy of windows is not an option.


These are the solutions I tried and didn't work:

 I tried restarting the router (1 minute power-off)
 I HAVE reinstalled my drivers for both LAN and WAN network cards at least twice each.
~ I  ran the following commands in CMD as administrator over 3 times, successfully, followed by reboot:
* sfc /scannow
* netsh winsock reset // netsh winsock reset catalog
* netsh int ip reset // netsh int ip reset reset.log hit

I have checked the following in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\servicel\NlaSvc has always had full control and read permissions for both SYSTEM and Administrators.

I replaced my nlasvc.dll file from C:\Windows\System32\ with one from another computer (and set TrustedInstaller as its owner)

Booting in Safe mode with netwo... Read more

A:Network: Unknown / The dependency service or group failed to start

Hi,

I'm sorry for your system reinstall. Here is a KB about your problem, you can refer to the link below.

http://support.microsoft.com/kb/827328
Hope this could help in the future.

9 more replies
Answer Match 60.48%

Hi,
 
We have an HP computer with Windows 7 OS system installed on it.  The workstation is where our inventory and ID database resides.  We have a Kaspersky Anti -Virus installed.   It caught a trojan virus and deleted some files.  I have attached a screen shot of the events.
 

 Capture2.JPG   94.72KB
  0 downloads
 
However, as it stands now the Network and Sharing Center in the computer is not able to view any basic network information  and has the message "unknown" .  In addition, it gives the error message  "Dependency service or group failed to start".    Can anyone please assist me with this problem?  Reformatting and reinstalling the computer is not an option.  Any help and guide is highly appreciated.
 

 Capture1.JPG   42.95KB
  0 downloads
 
I've also download and ran some anti malwares softwares, antivirus and scanner reports.  They  are as follows:
 
Farbar Service Scanner

 FSS.txt   3.69KB
  1 downloads
 
Junkware Removal Tool

 JRT.txt   1.46KB
  1 downloads
 
Kaspersky TDSSKiller

 KasperskyTDSSkiller.txt   97.56KB
  0 downloads
 
Root Kill

 Rkill.txt   3.13KB
  0 downloads
 
Malware Byte

 mbam-log-2013-11-18 (11-17-59).txt   1.9KB
  0 downloads
 
RKill

 ... Read more

More replies
Answer Match 60.48%

Hi Members, my computer was attacked last week with some kind of virus. First I could not download any updates, but after running some Malware tools, I was able to download all the important and optional updates from Microsoft.
One thing I did (mistake) was to uninstall MSE when working on it, in the hope that I would be able to re-install it.
These are some of the virus I found, Trojan.Vundo and also Trojan.P2P.worm, I am going to paste all the logs from the tools I run on the machine down here:
Please help anyone.
I have used all the tools from bleeping to clean any old antvirus(which I have never had since back 2007), the computer is updated but, I cannot get to install MSE.
 
 
 
 
 
 
 
Farbar Service Scanner Version: 16-02-2014
Ran by IKE (administrator) on 20-02-2014 at 12:16:06
Running from "C:\Users\IKE\Downloads"
Microsoft® Windows Vista™ Home Premium  Service Pack 2 (X86)
Boot Mode: Network
****************************************************************
 
Internet Services:
============
 
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.
IE proxy is enabled.
 
 
 
Windows Firewall:
=============
 
Firewall Disabled Policy: 
==================
 
 
System Restore:
============
SDRSVC Service is not running. Checking service configuration:
The start type of SDRSVC service is... Read more

A:Windows Vista 32 error code 0x80070643 "Cannot complete the MSE installation"

Please download TDSSKiller exe version to your desktop. Double-click on TDSSKiller.exe to run the tool for known TDSS variants. Vista/Windows 7 users right-click and select Run As Administrator.Click on Change Parameters and click Detect TDLFS File System.Click the Start Scan button.Do not use the computer during the scanIf the scan completes with nothing found, click Close to exit.If malicious objects are found, they will show in the Scan results - Select action for found objects and offer three options.Ensure Cure (default) is selected, then click Continue > Reboot now to finish the cleaning process.Note: If Cure is not an option, Skip instead, do not choose Delete unless instructed.A TDSSKiller text file would be saved in Local Disk C.Copy and paste the contents of that file in your next reply.ADW CleanerPlease download AdwCleaner by Xplode onto your desktop.Close all open programs and internet browsers.Double click on adwcleaner.exe to run the tool.Click on Clean.Confirm each time with Ok.You will be prompted to restart your computer. A text file will open after the restart.Please post the contents of that logfile with your next reply.You can find the logfile at C:\AdwCleaner[S1].txt as well.Please download Junkware Removal Tool to your desktop.Shut down your protection software now to avoid potential conflicts.Run the tool by double-clicking it. If you are using Windows Vista, 7, or 8; instead of double-clicking, right-mouse click JRT.exe and select "Run as Administra... Read more

15 more replies
Answer Match 60.06%

Hi fellow computer junkies. I can see a multitude of difficulties have been overcome by your group effort. I hope you've got another fix up your sleeves.

My laptop is 3 years old.
HP COMPAQ C700 Notebook PC
Vista Home Premium purchased with
Intel Pentium Dual CPU T2370 @1.73Ghz
2.00 GB RAM
32 bit OS
My internet connection is normally T-Mobile USB Internet card.
Also connect WiFi with built in card.

Local Disk C NTFS 221 GB Free 79.8 GB
Presario_RP Disk D 11.5 GB Free 2.03 GB
Pc tools spyware doctor w/Antivirus
Malwarebytes

The first indication of a problem began with announcement that new hardware had been found. Knowing that I had installed nothing, I blocked the new hardware attempt to connect.

Next day 4/11/11 I found I could not reach the internet using T-mobile. Among other things Windows Defender and Firewall were not operating. I got a message "Failed to connect to a windows service. Windows could not connect to System Event Notification Service.This problem prevents limited users from logon on to the system. As an administrator user, you can review the system Event Log for details about why the service didn't respond." Of course upon investigating I found I could not open Event Notification log. Normally at a time like this I would reach for System Restore. But, I was informed no restore points were available.With help from Brother-in-law Larry and using desktop with the T-mobile connection I was able to get online to find t... Read more

A:Connection status unknown the dependency service or group failed to start

Shot in the Dark

Have you tried running MalwareBytes in safe mode? Do you have an antivirus on your computer? Sometimes Virus' know MBAM so you may want to change the name of the program before you run it.

My Computer Lady
 

5 more replies
Answer Match 60.06%

I use my computer for everything, from work to play and to have her not be able to connect to the internet is frustrating me. This is the first time I've had a problem such as this and though i'm pretty good at fixing problems on my own the solution has surpassed my expertise. I'm going to give a quick history so that you can get a feel for what may be happening. She is a relatively new home built system, running windows vista ultimate 64 bit edition. The problem started the other day when I removed my wireless adapter from its PCI slot Trendnet TEW-423 and replaced it with a friends Linksys WMP110 at the time I was not using the Trendnet adapter it was disabled in windows and I was planning on removing it completely from my system. I was temporarily using at the time a Linksys Compact Wireless G USB Adapter which had been working fine but I was seeking on a quicker connection and that is where the problem started. When I started my system up with the new hardware the Linksys WMP110 and using the USB adapter to download the updated drivers from the Linksys site. After downloading and running the driver software to install the Linksys WMP110 the system froze and I had to hold down the power button to shut my machine down. When I restarted with the card still in, it was still freezing after a few minutes of running and I immediately removed the card which fixed the freezing problem but now with just the USB adapter installed it has a new problem. The network icon is saying &quo... Read more

A:Windows Vista Ultimate x64 - "Dependency service or group failed to start"

Maybe a stupid question but....

Did you download the right version?

5 more replies
Answer Match 59.22%

Hi

System:
- Dell Inspiron 1525, 1Gb RAM,
- Vista Home Premium

Error:
- Can connect to my router but not to the internet
- 'Dependency service or group failed to start' error
- cannot start DHCP or Diagnostic Policy Service in services, get 'Error 5: access is denied'

Have tried:
- checking for viruses and malware
- checked user account has admin permissions
- uninstalling n/w adapter

Am I going to have to backup data and restore the laptop to factory settings?

Any suggestions would be greatly appreciated.

Thanks

Gavin

A:[SOLVED] Vista home Premium - dependency service or group failed to start

Hi Gavin . . .

Go into System Services and make sure both are set to "Automatic" -
START | type services.msc

Scroll down, look for -
- DHCP
- Diagnostic Policy Service

2x-click change to "Automatic"; click on "Start"

Regards. . .

jcgriff2

`

7 more replies
Answer Match 58.38%

My computer is stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

A:Error 1075

Hi -See if this reset works first. Please read carefully -TCP/IP NetBIOS Helper error 1075 TCP/IP stack repair options for use with Windows XP with SP2/SP3.Start, Run, Type CMD to open a command prompt:In the command prompt window that opens, type the following commands, each followed by the Enter key:Note: Type only the text in bold for the following commands.Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalogReboot the machine. Thank You - EDITED to reset commands -

12 more replies
Answer Match 58.38%

Avg found two trojans. It didn't seem like it removed them. Internet was working though. Ran malwarebytes it found nothing. Internet was still working. Started Having connectivity issues. My dhcp client service won't start. I got a 1075 error. my internet via wifi or wired won't work. I ran the following command prompts:
net start AFD (response: the requested has already been started)
netsh int ip reset reset.log (response: resetting echo request, failed. Access is denied. Rebooting interface, ok! A reboot is required to complete this action.
netsh winsock reset catalog (response: successfully reset the winsock catalog. You must restart the computer in order to complete the reset.
SFC /SCANNOW (scan finishes and shows this response: windows resource protection found corrupt files but was unable to fix some of them. Details are included in the cbs.log windir\logs\cbs\cbs.log

I can't run the programs you suggested as I have no internet access. What now? Please help.
 

A:Help 1075 Error

I will try to run the items above in the other thread in safe mode and paste results. Sorry about that.
 

2 more replies
Answer Match 58.38%

My internet will not connect It Keeps saying Acquiring network address, I have tried everything even going into Services.msc to Start DHCP client and it gives me this error
Error 1075, The dependency service does not exist or has been marked for deletion

I am running Windows XP Home Edition SP3 and its Dell

A:Error 1075

First , you may have done this but ..... check if you can start the dependency service for DHCP client service.To view the dependency services registered for DHCP Client Service, try the following steps? Click on Start and them type cmd and press Enter? In the command prompt type: CMD /K SC QC DHCP - Please note the spaces -? Press Enter check if the dependency service is started.Verify that the Dependency Service / components are runningNext -To verify that the three dependency components are running. Follow the steps below:? Click Start, Run and type DEVMGMT.MSC - No spaces -? In the View menu, click Show hidden devices? Double-click Non-Plug and Play drivers section? Double-click the entry AFD, and click the Driver tab? Set the Startup type to System.? Start the service. Note down the error message if any.? Similarly start the two other drivers namely:? TCP/IP Protocol Driver? NetBios over Tcpip? Close Device Manager and restart Windows.? Now check if you can start the DHCP service.Let us know if you have done all this, and we can look for more ideas -

4 more replies
Answer Match 58.38%

I recently had to reinstal Windows XP Media Center SP3 operating system on my Dell Inspiron 9300 laptop. When trying to install Pure Networks Net Magc Pro it will not run as it says the platform service is no running. When I try to start the platform service I get the following Error 1075: The dependency service does not exist or has been marked for deletion.
Does anyone know how to correct this situation.

Thanks.

A:ERROR 1075

Why not post to the NetMagic forum. You will have more luck there then in this
General Microsoft Forum

2 more replies
Answer Match 57.96%

Hello,

I'm recently recovering from a mild virus infection on my computer, and noticed that after I had run Avast! and Malwarebytes to remove the virus, my computer lost its internet functionality. Upon running ipconfig in command prompt, I noticed that the computer was not being assigned an IP address, which lead me to believe there could be an issue with DHCP.

When running services.msc, I notice that both DHCP client and TCP/IP netbios are not running, and when I try to run them, I get an error 1075, that the files are "either non-existent or marked for deletion". I noticed that someone else had posted a very similar problem, but a few of the fixes were not available for viewing/download as they were specifically tailored for that issue.

I'm currently running Windows XP Media Center, Service Pack 3 on a Dell Inspiron E1505 laptop I had purchased in mid-2006.
 

A:DHCP and TCP/IP Error 1075

Below is a copy of the Hijack This log.

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 9:03:31 PM, on 12/26/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Alwil Software\Avast5\AvastSvc.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\ehome\ehtray.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\ATI Technologies\ATI.ACE\cli.exe
C:\Program Files\SigmaTel\C-Major Audio\WDM\stsystra.exe
C:\Program Files\Microsoft Office\Office12\GrooveMonitor.exe
C:\Program Files\VERIZONDM\bin\sprtcmd.exe
C:\Program Files\Adobe\Reader 9.0\Reader\Reader_sl.exe
C:\Program Files\Alwil Software\Avast5\avastUI.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\LogMeIn Hamachi\hamachi-2.exe
C:\Program Files\Java\jre6\bin\jqs.exe
c:\PROGRA~1\mcafee\SITEAD~1\mcsacore.exe
C:\Program Files\VERIZONDM\bin\sprtsvc.exe
C:\Program Files\VERIZONDM\bin\tgsrvc.exe
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\system32\SearchIndexer.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Documents and Settings\Shivang\Desktop\HijackThis.exe
C:\WI... Read more

2 more replies
Answer Match 57.96%

My windows fire wall wont start Ive tried starting it in services and the action center but no luck, i know their might be a hardware change or virus or malware that has done this but im unable to pin point it the date of any change because Ive only just realized that the firewall was off because i wanted to block a game from accessing the Internet. Ive scanned countless times but it says its clean.  Also windows update wont install updates and system recovery doesn't work...Ive been trying to follow instructions that have been given to other people but with no luck, any help will be appreciated.
 
my PC: 

OptiPlex 760 (Late 2008)

Service Tag: 5M0YJ4J | Express Service Code: 12215778643
32 bit operating system win 7 home premium 
 

 
many thanks

A:!!firewall error 1075!!

Please download and install Speccy to provide us with information about your computer.  When  FileHippo opens, click on Download latest version in the upper right pane. When Speccy opens you will see a screen similar to the one below.  Click on File which is outlined in red in the screen above, and then click on Publish Snapshot. The following screen will appear, click on Yes.  The following screen will appear, click on Copy to Clipboard.  In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.  Please download MiniToolBox, save it to your desktop and run it. Checkmark the following checkbox: List Installed Programs Click on Go to start the scan.  Once it is finished highlight the text, copy it and paste it in your next post. Try the following.  Click on the Start orb, then type Services in the Search programs and files box. Services will appear above the search box under Programs, right click on Services and choose Run as administrator. When Services opens scroll down to until you find Windows Firewall, double click on it. Click the Startup type box and make sure it is set to Automatic, if it isn't click on Automatic. Look in the Service status to see if it is running, if it isn't click on Start, then click on Apply, then OK. Scroll down to Base Filtering Engine and doulbe click on it.... Read more

11 more replies
Answer Match 57.96%

Hello All,

I've tried most of today to get rid of a nasty trojan. System-Check!

I'm almost there - or so I thought. Visually my laptop seems to looking okay, except, I can't seem to restart my Firewall within McAfee?

Here's a DDS:
**** EDITED ****

DDS removed - as I managed to solve issue by uninstalling MCafee and reinstlling.
Mods - please remove post or close. thanks

A:McAfee 1075 Error

Mods - please close post or remove.

thank you.

2 more replies
Answer Match 57.96%

DHCP error 1075--can not start the DHCP client on local computer.Dependency service does not exist or has been marked for deletion..

Hi thanks for any help you can give.
Machine is a Dell dimension e520
Win XP Media center edition SP 2

I have the original dell discs and access to a working laptop also running win XP [this one]

During a routine virus scan by avira anti vir it quarentined c:\windowes\system32\drivers\netby.sys.

This disabled the DHCP client so no IP traffic
I restored the file but still no luck

After trying to renew the IP and some searching around I found that the HKEY local machine system currentcontrolset services NETbt registry key is missing

In services DHCP cannot be restarted --gives the warning above.
AFD and TCP/IP are in device manager -non plug & play show hidden devices NETbt is not

Can the registry be repaired from the original discs without having to reinstall everything else?
Or is it as easy as inserting the missing registry key?

Thanks Bob

A:DHCP error 1075

Hi see if this can help How to fix: Error 1075, The dependency service does not exist or has been marked for deletion | Kaliphonia.com

1 more replies
Answer Match 57.96%

When I try to connect my printer lexmark 4200 series I get the message no print spooler available error 1075 Please HELP!!!

A:[SOLVED] Error 1075

I would make sure the print spooler service is enabled.

Go to Start > Run... and type services.msc to open the service snap-in. Then Scroll down to Print Spooler. Right click on it and click Start. Then right click on it, select Properties, and set the startup type to Automatic.

9 more replies
Answer Match 57.96%

DHCP and TCP/IP can not be started from Services with out the following error.

Error 1075: The dependency service does not exist or has been marked for deletion.

I've checked the dependencies and all are running.

AFD is the only driver common to both DHCP and TCP/IP so I assumed it is either not running or is corrupt..yet when I try to start AFD from the CMD prompt I get...."service is already running.

I have since disabled my Lan Connection via Network Connections as it just sits there trying to acquire ip without ever timing out.

I also performed a registry scan with Registry Booster in Safe Mode. It reported:

1061 System Errors
205 User Errors, and
1 Third Party Error

A cursory review of the log tells me the majority have to do with poorly uninstalled programs. I did NOT let Registry Booster fix anything.

As per Forum Rules my HiJackThis log and others follow:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 7:57:39 PM, on 11/26/2011
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16791)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\PROGRA~1\AVG\AVG10\avgchsvx.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Pure Networks\Network Magic\nmapp.exe
C:\Program Files\QuickTime\QTTask.exe
C:\Program Files\AVG\A... Read more

A:Error 1075 Can not Acquire Ip

16 more replies
Answer Match 57.96%

The full message is error 1075: The dependancy service either does not exist or has been marked for deletion

This started with a tidserv!inf infection. Norton End-Point seems to have deleted all related virus infections, however, I am now unable to start the DHCP service. I have to set a static IP in order to connect to the internet.

I believe tdx.dll was identified as a virus and deleted. it was listed as a dependancy of dhcp but had no descriptor. Currently it is not listed as a dependancy.

I cannot view network shares from this PC nor can I view shares that I host here on other PC's. Only this computer shows up in net places.

I did an sfc /scannow and it told me audiodev.dll and mofd.dll were corrupted and the files in the store have been corrupted.

I had to take ownership with the admin group in order to replace them with extracted copies from my windows cd, but I when I went back to reassign trustedinstaller as the owner it was not listed as an option.

my cd is without service pack and my installed service pack is sp2.

can anyone be of assistance.

A:DHCP error 1075

My dhcp was working for a day but its back down again. i dont know how to recreate the dependancy on tdx

2 more replies
Answer Match 57.96%

Hello all,

I've noticed that a few people have posted concerning this topic, so I've tried to read up on as many possible solutions before posting. I'm recently recovering from a mild virus infection on my computer, and noticed that after I had run Avast! and Malwarebytes to remove the virus, my computer lost its internet functionality. Upon running ipconfig in command prompt, I noticed that the computer was not being assigned an IP address, which lead me to believe there could be an issue with DHCP.

When running services.msc, I notice that both DHCP client and TCP/IP netbios are not running, and when I try to run them, I get an error 1075, that the files are "either non-existent or marked for deletion". I noticed that someone else had posted a very similar problem, but a few of the more advanced fixes seemed specifically tailored for their issue.

Below are the fixes I've attempted thus far -

1. Checked the registry for DHCP?s dependencies (3 are listed, Afd, Tcpip, and NetBT).
2. Reset TCP/IP stack to installation defaults by typing ?netsh int ip reset reset.log? into command prompt.
3. Reset WINSOCK entries to installation defaults by typing ?netsh winsock reset catalog? into command prompt.
4. Ran ?sfc /scannow? with an XP SP3 CD.

I'm currently running Windows XP Media Center, Service Pack 3 on a Dell Inspiron E1505 laptop I had purchased in mid-2006.

A:DHCP and TCP/IP Error 1075

Welcome aboard Please download Farbar Service Scanner and run it on the computer with the issue.Make sure the following options are checked:Internet ServicesWindows FirewallSystem RestoreSecurity CenterWindows UpdatePress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.

7 more replies
Answer Match 57.96%

I am having the same issues as the other thread that is currently going on regarding a virus that seems to have left me unable to connect to the internet , i have done the hijack this report and will post results . please help!!
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 9:17:51 PM, on 12/20/2011
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Adobe\Adobe Version Cue CS2\ControlPanel\VersionCueCS2Tray.exe
C:\Program Files\LeapFrog\LeapFrog Connect\Monitor.exe
C:\Program Files\Common Files\Java\Java Update\jusched.exe
C:\WINDOWS\system32\spool\drivers\w32x86\3\hpztsb10.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files\SUPERAntiSpyware\SUPERAntiSpyware.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\bin\hpotdd01.exe
C:\Program Files\NETGEAR\WG111T\wlan111t.exe
C:\WINDOWS\system32\netdde.exe
C:\Program Files\SUPERAntiSpyware\SASCORE.EXE
C:\WINDOWS\system32\CTsvcCDA.EXE
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\LeapFrog\LeapFrog Connect\CommandService.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\Ms... Read more

A:Error 1075 no internet

help
 

1 more replies
Answer Match 57.12%

When I try to run the XP SP 2 install program, it says "The expected version of the product was not found on your system" and exits. I have XP SP 1 installed, so I don't know what the problem is.
 

A:XP Service Pack 2 Installation Error

Where did you get SP2? The eror you are getting is the usual one if you don't have Office installed and you try to install Office XP SP2, and not XP SP2.
 

1 more replies
Answer Match 57.12%

When I was installing Service Pack 1 onto my laptop, Windows 7, the charger was accidentally turned off, causing it to install incorrectly. Now, when I turn it on, I get

"Preparing to configure Windows . . .
Do not turn off your computer."

After a few minutes, this changes to

"Failure configuring Service Pack
Reverting changes . . .
Do not turn off your computer."

It then stays on this screen until turned off. I can get it running normally by starting in safe mode, going into Programs and Features and uninstalling Service Pack 1 on the list, and clicking restart now when prompted.

I've tried a few things to stop this happening, all unsuccessful. The update is KB976932. Any advice? And thanks in advance

A:Service Pack 1 Installation Error

Just a thought...
Is it possible to use a "current" Restore Point PRIOR to this glitch occurring you could try to roll back to?

2 more replies
Answer Match 57.12%

My computer is forever stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. Hopefully someone can help out. (Note: This is not the affected computer, the logs are from it, however) I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

A:Cannot connect to internet - Error 1075

Hi -As long as you can understand the 'reasonably basic' directions, there is a solution here -http://www.google.com.au/url?sa=t&rct=j&q=error%201075&source=web&cd=1&ved=0CDsQFjAA&url=http%3A%2F%2Fkaliphonia.com%2Fcontent%2Fwindows%2Fhow-to-fix-error-1075-the-dependency-service-does-not-exist-or-has-been-marked-for-d&ei=jwvpTrX9K4fBiQfsoqHSCA&usg=AFQjCNGUfPzx_GkR2922eUot0LA67VjvMAThank You -

25 more replies
Answer Match 57.12%

My computer is forever stuck on "Acquiring Network address". I have tried to go into the services, and turn on the DHCP Client, however I get an Error 1075: The dependency service does not exist or has been marked for deletion, and it will not start. Attached is the logs you wished. Hopefully someone can help out. (Note: This is not the affected computer, the logs are from it, however) I am running Windows XP Home Edition, SP3. I thank you in advance for the help.

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 8:29:14 AM, on 12/13/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Symantec Shared\PIF\{B8E1DD85-8582-4c61-B58F-2F227FCA9A08}\PIFSvc.exe
C:\Program Files\McAfee\SiteAdvisor\McSACore.exe
C:\Program Files\Common Files\Motive\McciCMService.exe
C:\Program Files\Common Files\McAfee\McSvcHost\McSvHost.exe
C:\WINDOWS\system32\mfevtps.exe
C:\WINDOWS\system32\HPZipm12.exe
C:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Yahoo!\SoftwareUpdate\YahooAUService.exe
C... Read more

A:Cannot connect to internet - Error 1075

Thanks for the quick response guys, You're a lifesaver. I shall be sure to recommend that all my friends come to http://www.bleepingcomputer.com for all their troubles too!
 

1 more replies
Answer Match 57.12%

Help me please, I have the same problem, and here is the SystemLook result:

SystemLook 30.07.11 by jpshortstuff
Log created at 09:34 on 18/12/2011 by USER
Administrator - Elevation successful

========== filefind ==========

Searching for "afd.sys"
C:\Windows\System32\drivers\afd.sys --a---- 338944 bytes [12:25 16/12/2011] [12:21 16/12/2011] 9EBBBA55060F786F0FCAA3893BFA2806
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7600.16385_none_d7be98b5bfc0b4c1\afd.sys --a---- 338944 bytes [23:12 13/07/2009] [23:12 13/07/2009] DDC040FDB01EF1712A6B13E52AFB104C
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7600.16802_none_d81220b5bf827af7\afd.sys --a---- 338944 bytes [10:52 17/06/2011] [02:35 25/04/2011] 0DB7A48388D54D154EBEC120461A0FCD
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7600.20951_none_d864ad9ad8c98d1f\afd.sys --a---- 338944 bytes [10:52 17/06/2011] [02:27 25/04/2011] C114AB7A1550D42EA1700FFD4179CF5A
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7601.17514_none_d9efac7dbcaf385b\afd.sys --a---- 338944 bytes [02:30 09/07/2011] [08:40 20/11/2010] 1151FD4FB0216CFED887BFDE29EBD516
C:\Windows\winsxs\x86_microsoft-windows-winsock-core_31bf3856ad364e35_6.1.7601.17603_none_d9f97e05bca8003a\afd.sys --a---- 338944 bytes [12:25 16/12/2011] [12:21 16... Read more

A:Cannot connect to internet - Error 1075

Can I see you FSS log again?

http://download.bleepingcomputer.com/farbar/FSS.exe

and run it on the computer with the issue.

* Press "Scan".
* It will create a log (FSS.txt) in the same directory the tool is run.
* Please copy and paste the log to your reply.

1 more replies