Tech Problem Aggregator

[SOLVED] How to stop "low disk space" messages

Q: [SOLVED] How to stop "low disk space" messages

I had the same trouble. I had never backed up my hard drive before i had kind of run into it so i figure what the hay i'll try it. It told me to back it up on the D drive or disk. (since i didn't have a disk setting there i figured i would back it up on D drive) Well after a few min. it said i didn't have enough space. So i figured Oh well. I didn't need to back it up. Well EVERY TIME I Reboot the computer now it tells me I'm low on disk space on drive D.
Now everyone know D drive doesn't have alot of space it has your system on it. But why now is it checking it all the time. When it tells me to clean it , it shows me where and there isn't anything to clean. THIS IS ANNOYING! HOW DO I MAKE IT STOP?

There is no screen to give a shot of. It's a little icon on the task bar that pops up. Than when you click on it it says delete unused files. When you click on it it gives you the list of files you can delete. BUT there is only two things on it and both are all ready empty. One is recycle bin.

A: [SOLVED] How to stop "low disk space" messages

Hi Rachel3790 and welcome to TSF !

It's better to start your own thread so that we keep one thread for one user. Here's a link to the related thread you first posted into :
http://www.techsupportforum.com/f10/...ve-182725.html

Which program did you use to backup your system drive ?

If this is an HP computer have a look at the link advised by Mon in the other thread :
http://h10025.www1.hp.com/ewfrf/wc/g...reg_R1002_USEN

Else, when disk space is running low, Windows may advise you to run the disk cleanup utility which allows you to delete temporary files and empty the recycle bin, among other things. Since this doesn't help it means that your hard drive is simply filled with your own data and the data from the programs you installed on it. The backup you just created is probably also taking some space and if you don't need it you should just delete it.

What you need to do is copy some files on CD's or DVD's, on an external drive or to another computer. You should uninstall the programs you're not using anymore using add/remove programs and you can also delete some old documents of yours in your "my document" folder if you don't need them anymore.

Be careful not to delete any system file or folder. Files that are safe to move away are video and music files. These media files usually take plenty of space and you can free that space if you burn them on CD's or DVD's and delete them from your hard drive.

If you have no idea what's using up space on your hard drive, you can use WinDirStat to see which folders are using the most space.

4 more replies
Answer Match 84.3%

Big Kudos to anybody who can solve this one! Very little/nothing on Google or microsoft support site.
Here's the problem:

I'm helping a family member who has a new Dell PC with Windows XP Home, Outlook Express 6.
Every time they close Outlook Express, the following Warning pops up:
To free up disk space OE can compact messages. This may take a few minutes. There are 2 options - OK and Cancel.

Here is the rub: We've closed the warning, or we've clicked OK, or we've clicked cancel, we've checked the box that says don't ask me again....these warnings continue to come up next time (EVERY time) Outlook Express is closed.

This is a senior citizen who has, maybe, 20 email messages and no shortage of memory or disk space. I want to prevent this warning from coming up ever again. How do I do it? Is there some default I can change somewhere?
 

A:Solved: "Free Up Disk Space" OE warning ?? Stop the Madness!

6 more replies
Answer Match 107.52%

I keep getting "Low disk space" messages about one of my partitions.

First of all, what is the point of this message? I can see why it would be useful for the system drive, but for all other drives why would anyone worry about filling up a drive?

More importantly, how can I disable this message from persistently popping up every day?

A:What are "Low disk space" messages for?

Hello Marty,

It's basically just a warning to let you know that the disk/partition is extremely low on free space. This is to warn you to either clear space or get a bigger storage device soon since you could lose data, possibly everything, on the hard drive if you run out of space on it.

The tutorial below can help show you how to disable the "Low disk space" message. Low Disk Space Warning in Vista
Hope this helps,
Shawn

9 more replies
Answer Match 103.74%

MS thinks that one of my PCs is running W7 that's not genuine. It is genuine - at least I bought it from Amazon and paid ?141 for it so that - to me - means it's genuine. It may not be but neither Amazon nor MS will take any responsibility for it not being genuine so I've given up with them both. I think that the issue arises because of hardware changes I've made. Oh - yes, I've lost the box with the key on it too.

Long story short. I use this PC very little and when I first first got the black screen and messages after I installed a larger hard drive and reinstated the drive image from an Acronis backup. I stupidly forgot to reinstate the drive signature. Then it happened again when I changed the ITX motherboard.

Now here's the real question. Every now and then it gives me the "black screen" treatment. I fix it by restoring a drive image and turning off W7 updates.
If the damned thing is told not to call home then it shouldn't should it? What's going on? It seems to give me a month or two and then goes psycho on me like HAL9000!

A:How do I stop W7 "calling home" and displaying "not genuine" messages?

If this is an OEM version then I can understand why it's doing this after you changed motherboards, since it is forever tied to the first one it is installed on.

If you can follow these instructions for activation issues,

Windows Genuine and Activation Issue Posting Instructions

The results of that can help resolve your issue.

Filling in your system specs will help as well,

System Info - See Your System Specs

If your installation is valid then there's no reason to turn off updates or try to keep it from calling home.

6 more replies
Answer Match 98.28%

I use microsoft office 2007 My computer is dual core 2.53 Ghz 3 GB memory and I have 91.4 GB free disk space.
I am using Windows XP Professional Version 2002 Service Pack 2
I work a lot with word and did not have any problem. Now i have a problem with one particular file that I can not open and I always get the error "There is not enough memory or disk space to complete the operation. " When I try to open the file File size is not so big 652 KB Any ideas what I can do.

Thanks
Ofer
 

A:Solved: "There is not enough memory or disk space to complete the operation."

What type of file? Where did it come from?

If you do not have file endings showing, you should. Be sure that there is not a hidden "exe" or "com" at the end of that file.
 

3 more replies
Answer Match 98.28%

I know this question has been asked before as I've read about it all over the Internet. In order to get rid of the 'Low Disk Space' message it says to go to the registry and locate HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer, type a new value, etc. The only problem is I don't have an Explorer key. It ends at Policies.

I've tried everything. I've tried creating the key myself, and I've tried inserting the value into the policies folder. Nothing has worked. Can anyone help?
Thank you
Brad
 

A:Solved: Can't get rid of "Low Disk Space" message on my recovery drive

I guess no one else is having this problem. Do you think this is a problem with HP?
Brad
 

3 more replies
Answer Match 98.28%

I know it reduces the overall file size of the folder or file in question, but what method does it use to do this?

If you are not familiar with this phrase, it appear if you right-click on a file/folder in windows explorer and select "advanced". When selected the file/folder name will turn blue.

I need to know for some work, I have to compress some work and I could merely show myself using this feature, but explaining how it works would be better.

Thank you

A:[SOLVED] What does "Compress Contents To Save Disk Space" do?

This compression method does not reduce the "size" of a folder, it reduced the "size on disk". am I right in thinking that this compression method does not alter the code of any files, it merely stores the folder in a way which saves space on the disk?

6 more replies
Answer Match 96.6%

Hello people, I have an external 500 gigs drive with over 100 gigs free and a partition on a RAID 0 with 500 gigs free. I was trying to copy a folder with 25 gigs of data from my external hard drive to my 500 gigs partition, until at about copying 2.5 gigs, Windows shows up a warning saying that there is not enough disk space and that the file (was 500 Kb...) could not be copied. I skipped it and kept doing the same thing for every subsequent file... whats my computer's problem? I have WIndows Vista Home.
Thanks!
 

A:Solved: "There is not enough disk space" warning

16 more replies
Answer Match 96.6%

I am trying to copy a 9gig video file to my Seagate external USB 2 drive for back-up.
The drive has 140gig available, but I keep getting the "not enough free disk space" warning when I try to move it and it will not allow it to be copied.
What am I missing? is it a format thing?
 

A:Solved: "not enough free disk space"

6 more replies
Answer Match 96.6%

I frequently get a notice that the disk space on my D drive is low and asking me if I want to clear up some space by using the cleaning utility that came with Windows XP Home Edition. This disk is my secondary drive and I know the space is low. Is there a way that I can get rid of this annoying notice that appears on my screen every so often? Thanks.
 

A:Solved: Notice of "Low Disk Space"

Hi referee07,

The "clean up unnecessary files" is safe to use. You can also add
choices in the list of what's to be deleted. You can also safely
remove all temporary files... Search for "*.tmp" (without quotes)
and delete those.

Also the trash bin standard setting is 10% of your drive. I would
adjust that downward to 2 % on all drives.

And, of course, you can delete some things that you really don't
need, or put them on a CD if you have a burner. Hope that helps.
 

2 more replies
Answer Match 96.18%

Here's the story. I bought this new Samsung 840 250GB SSD.
I first did a clean install of windows 7 on it and it worked fine. Windows installed without much problem and everything. Then something didn't look right about the partitions. It looked like because I had all my HDDs connected while installing windows on the SSD the windows created the system reserve on the old HDD rather than the SSD. So I went back and decided to start from scratch with all the HDDs except for the SSD disconnected. I tried reinstalling windows on it but this time it didn't work. I tried formatting the SSD and it just gave me an error saying windows couldn't install on a GPT disk. I went into bios, made sure the PC was booting from the UEFI DVD drive and it still kept giving me the same error.

So I then booted up my old HDD. I tried formatting my SSD and now I can't delete the partition!
This is what my disk set up looks like:


If I click "extend volume" on the "New Volume (G" disk, it says "there is not enough space on the disk(s) to complete this operation".
If I try to create a "new simple volume" on the "unallocated" partition, it says the same...

Have I destroyed my new SSD now?! I just want it to work like a new clean disk...

A:If I try to "extend volume" it gives "not enough space on the disk(s)"

Hiyya Tracing try doing it with Partition Wizard mate Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition.
Brilliant tool if you can't do anything with the partition them just wipe the disk mate and start over with this SSD Alignment

1 more replies
Answer Match 93.24%

Please can somebody help with this minor but annoying matter. When turning on my business computer one morning, the space bar and return/enter buttons are visable when i type emails, but when i send them, they are not. I know its a setting, but can anyone tell me what setting and how to turn it off?

Thanks!

A:[SOLVED] "Space bar" and "return/enter" are visual on emails! Help

You need to tell us what email client you use as these days not everyone uses the built-in one.

4 more replies
Answer Match 91.14%

Hi - I have a barely used Window 7 pc on which I run only Yahoo messenger and more importantly Proquote ( stock exchange data)

I keep getting the following pop up messages:

Error
Setup was unable to automatically close all applications etc etc before continuing setup etc etc with the options to "Abort, Retry or Ignore" I have tried all 3 options, i have re started the pc but this pop keeps occurring- I don't even know what it;s trying to setup!

related I'M also getting a Setup message saying: " unable to execute file c:/users/wayneoffice/appdata/roaming/compatability verifier/compatabilitycheck.exe create proces failed code 5 "


I generally use a mac - and have no idea how to remove these error messages nor do I even know what they are trying to do! help!

TIA

Wayn0

A:How do I stop "setup " error messages

You might have some malware that luckily is failing its install. I would run Malwarebytes and see if it turns up anything before we start trying to debug this issue. It's free and available for download here:

Malwarebytes | Free Anti-Malware Detection & Removal Software

1 more replies
Answer Match 90.3%

This is hard to describe, but here goes, WHen I use Word 2000
somehow there is a 3 space automatic tab that is annoying because I have to back space 3 spaces every time. For example,
If I am typing an address like: Mr. John John and I hit return to type the address: 343 E. Strong Ave.

Even though I have the curser right under the M it puts the 343 three spaces forward, under the J on the first John.

I can't find where that is formatted or where to change it.

ANyone have any ideas?
 

A:"Word" I need to stop the automatic 3 space tab

7 more replies
Answer Match 90.3%

Hello, TSG!

Just yesterday I was using the computer normally until I got a Blue Screen. Getting a blue screen is usually something normal that occurs to my every so often, so I didn't mind it and rebooted the computer normally. However, I got two more blue screens within the next hour. The 3rd time rebooting, my computer starts to act strange as if it had a virus. Upon powering up the monitor would just display a black screen with two lines about something --- which I don't remember, sorry --- and stayed like that unless I plugged out the power cord or held on the power button to shut down. Then when after a few tries it boots and displays a message "Floppy Disk Failure" and "Drive 1 not found: Serial ATA, SATA-1" (and the same message for Drives 2 and 3) show up. Also it asks me to continue loading by pressing the F1 Key.

When Windows loads the first time, it displays a message saying a bunch of hardware has just been installed and ready for use. Also, my internal clock resetted itself back to Monday, November 07, 2005 (Which, if I recall, is the date when I got the computer) and my speakers do not work.

TL;DR Version
3 blue screens within a short time
Floppy disk fail
Drivers 1-3 not found: Serial ATA, SATA-1-3

Anyway, I browsed through Google but I haven't seen anyone with both problems. I disabled my Floppy Disk Drive and that message doesn't show up anymore, but the others do and my computer still isn't fixed. I ran a vir... Read more

A:Solved: "Floppy Disk Failure" and "Drive 1 not found" problem

9 more replies
Answer Match 89.88%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Answer Match 89.46%

Hi, I have a very frustrating problem. One day I was playing a game and then my cp BSOD (it?s OC?d so I wasn?t too alarmed). Then I went to boot back up and all I got was a blinking cursor. No msg, no text, NOTHING! Well I looked around on the internet and though a combination of windows startup repair and bootrec, bootsec, diskpart and chkdsk I was able to get it to where now all it will say is ?Disk Read Error, press ctrl+alt+del to restart?. Of course pressing that does nothing. The weird thing is that I know the drive is good, I can read all the data off of it just fine. I don?t think it?s going out as it?s an 80gb intel ssd in a desktop with very good airflow, no issues there. Then when I try to go through windows startup repair it says no problems, clearly lying. Another weird thing is that when I first go to recovery options it will detect my os just fine, but then I run bootrec /scanos and it comes up with a BIG, FAT NOTHING!! I?ve been at this for about 8 hours on and off and I?m at my wits end. Any suggestions or tips are greatly appreciated! I really, really want to avoid formatting and re-installing because I very much want to not have to go through the huge hassle of re-installing EVERYTHING!! And even more so because I know the drive and data are good!
Thanks in advance guys J

A:Repeated "Disk Read Error" messages for no reason!

Anyone?

5 more replies
Answer Match 89.46%

Today, I've been receiving a ton of messages that say "Windows - no disk Exception Processing Message c0000013 Parameters 75b6bf9c 4 75b6bf9". I don't think I've changed much lately, so what could be causing this?

Here is my HJT log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:52:49 PM, on 4/13/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16512)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Common Files\Symantec Shared\PIF\{B8E1DD85-8582-4c61-B58F-2F227FCA9A08}\PIFSvc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\PC Tools AntiVirus\PCTAVSvc.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\WINDOWS\System32\WLTRYSVC.EXE
C:\WINDOWS\System32\bcmwltry.exe
C:\WINDOWS\system32\fxssvc.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\WLTRAY.exe
C:\WINDOWS\system32\KADxMain.exe
C:\Program Files\Common Files\InstallShield\Update... Read more

A:Recieving "Windows - no disk Excpetion Processing messages"

Hello and welcome to TSF.

Sorry for the delayed response. I can't see anything abnormal in the log. My research indicates that error is usually reported to be associated with Quicktime when present in Startup. Try uninstalling Quicktime and see if you still have the problem.

5 more replies
Answer Match 88.62%

My wife has a two month old Lenovo ideapad with Windows 7. We are now getting alerts that the D partition is near full. Is this system taking multipul backups of the harddrive C and storing them all? What are my best options to have a safe backup, but not overloading the D partition? I do see in; Computer>System>Device Manager>Disk Drives>D Drive General tab that there are two options at the bottom.
option one, (not checked in my case) "Compress this drive to save disk space".
Option two, (checked) "Allow files on this drive to have contents indexed in addition to file properties"
Would selecting option one solve my problem? If this system is saving a snapshot of D over and over, it will only be a matter of time when option one will be overcome.
SO, I would think that there has to be a setting that will let partition D delete older backups...right?

Would it be a combination of selecting option one and changing a setting that would enable older backups to be automaticaly removed?

A:Action Center "Check backup disk space" alert

Welcome to the forum
If your D drive is made for backup's only, you can delete all files exept the newest one.
But it's advised to make backup's on an external USB drive and change the frequency of backup's to your files and olso for images to your OS.

4 more replies
Answer Match 88.62%

Hi everybody, I've made a lot of progress with this external drive, but I seem to be stuck now.

-------------------------------------------------

Unidentified problem with 3TB external drive (USB 3.0 enclosure) that the computer suddenly started treating as RAW. Spent the last two weeks running CHKDSK /r repeatedly. Slowly got through many hundreds of indexing errors. Now I get as far as "verifying security descriptors (stage 3 of 5)," but I seem to have hit a wall here...

CHKDSK won?t go any further because there is "Insufficient disk space to fix the security descriptors data stream."

Microsoft?s advice (Error Message:) is of no help to me. They say to ?delete some unneeded files from the disk and try again,? which doesn?t help me since I can?t get the drive to mount or stay mounted long enough to copy the files onto a different drive.

-------------------------------------------------

The drive behaves differently each times I power up its enclosure, but it is usually one of these things:

Drive doesn't mount.
Drive mounts after a few minutes. I see a generic "Local Disk L:" in Windows Explorer but, when I try to explore its folders, the computer takes about 15 minutes trying to read it (I can see the progress bar moving slowly across the top of the screen), and then says that "The parameter is incorrect." Drive disappears from Windows Explorer.
Drive mounts after a few minutes. I see the full Volume name that I originall... Read more

A:"Insufficient disk space to fix the security descriptors data stream."

Someone? Anyone?

8 more replies
Answer Match 88.62%

I have a C: drive which I want to increase in size. Under disk management there is 20GB of "Free space" - (right next to the C: partition). But neither disk management or EASUES partition manager will allow the partition to use this space. How to I change "free space" to "unallocated" so that it can be used ?

A:Cannot extend volume (disk management) although "free space" exists

Can you post a snip showing what you have? An image makes it easier for us to help you. For example, you said that there was 20GB of free space next to your C: partition. What you didn't say was whether it was to the left or right of it.

7 more replies
Answer Match 88.62%

Hello, my system disk is an Intel X25-M G2 80Gb (74.4Gb) and I recently discovered that there is a rather huge discrepancy in used disk space.

According to disk properties I have used up ~73.7 of the 74.4Gb, but the actual files on the disk are only 51.7Gb if I show all hidden/system files, mark everything and check size and WinDirStat report the EXACT same thing.

I have no pagefile on my system disk, no hibernation file and no system restores (it's actually disabled).

So any ideas whatsoever what this could be? It's starting to become rather annoying to "lose" 25% of my system disk. I've run diagnostics and haven't been able to find anything, I've googled it extensively and found others with similar problems, but the only solutions I've found are pagefile, hibernation file, system restores and of course disk cleaning - all of which I have checked already.

A:Approx. 20Gb of system disk space "missing" - Intel X25-M G2

Hello Zeilon, and welcome to Seven Forums.

The tutorial below may be able to help you ID what may be using the SSD's space. Option 1 with WinDirStat is a good starting point.

Hard Disk Space - Free Up and Recover

Hope this helps,
Shawn

3 more replies
Answer Match 88.62%

I'm hoping this is a simple fix. I'm trying to fix my elderly uncle's Asus laptop. System Repair pops up and fails. I booted to command prompt and found out it may be hard disk space. 400+ GB Hard drive (only one drive) and there's only 1024kb Free. I'm thinking that could be the issue. Hardware was checked out at the computer store and is fine. But they were going to charge him $200 to fix this failure to boot up issue. I told him to let me try first.

Can I possible "compact" this drive from the command prompt screen?


Note: I have no other Win 7 systems, so can't create a disk, and I have no original disks.
Also, no restore point has ever been set, and there are no partitions on the drive.

A:"Startup repair" failing - hard disk space issue?

Normally, I'd tell you to download a program or two to examine what's using the space or to clean up unnecessary files.

But with only 1024 kb of space, you probably can't install anything.

So--try this:

Start button, search box, type in "disk cleanup" and then poke the disk cleanup listing that shows up.

Let it clean up the drive and report back with how much space you then have.

You'll see an option in disc cleanup where it asks if you want to clean up system files as well. Say yes.

It should calculate how much space it will recover.

Let it run to completion. Might take a few minutes.

Then check your recycle bin to see if it's empty.

Report back with available space.

9 more replies
Answer Match 88.62%

Hello everyone,

I am currently a new registered user and was wondering if this was the correct place to post my problem. I have a issue with my Local Disk (C:/ Drive) and was wondering what was taking up so much space. I have a 1TB hardrive, currently on my Local Disk I have 136GB free of 454 GB. However, when I add up what I can find when opening the drive, it doesn't add up anywhere near the 317GB that it says has been used.

Now, I have currently installed...CCleaner, Eusing Regcleaner, AVG Free 8.0, and TreeSize, all of which I have run various times (still learning about TreeSize).

BEFORE I was getting scared because I had even less memory free (approx. 74.9GB of 454GB). But after running a Disk Cleanup...it knocked it down to it's current state. It still doesn't explain how I have so much memory used.

My only thought now is that there are extra copies of my folders and files. Or most likely this has something to do with Vista's "System Restore". I am not very adept at using this PC. Whatever advice you guys can give...try to dumb it down for me and tell me where to go (e.g. Control Panel>Systems>etc..)

And my System Specs are incomplete because I don't even know where to go to get all that information! So if you need to know something about my PC tell me where I might find it or just look at what I have for my System Spec.

Thank you very much, I'll be checking my post at least once a day so I'll try to respond quick if any of you pros have an idea... Read more

A:Local Disk/System Restore/"eating" up space

Hello Mike, and welcome to Vista Forums.

This tutorial will help you see how much disk space is being used by System Restore and how to adjust the MAX size it can use. With a 1TB drive, it will have a high MAX by default.

System Restore - disk space

Hope this helps,
Shawn

3 more replies
Answer Match 88.62%

i heard this is way to much. what should i set it to?> or what else should i do?

thanks alot,

dustin

A:in my internet options, my "amount of disk space to use" is 8591 MB..?

It's down to preference really but you don't really need it to be set more than 200 mb's.

Hope that helps :)

1 more replies
Answer Match 88.62%

Hi - I keep getting the message that a backup failed due to less than 400 MB on the Windows disk. I have about 350 GB available on the disk!

Other backups have worked OK. I have seen a long thread on the Microsoft site with lots of people saying they have the same intermittent problem, but no solution. Anyone know what causes this?

I'm working Home Premium, and backup up to another hard disk on the same machine which also has lots of free space.

Thanks guys

Frances
 

A:Vista backup fails "not enough space on Windows disk"

Just a couple of simple questions, which you may have already covered.
How much space is on the C drive.(where Vista is installed)
On the 'Where do you want to save your backup' page, you are sure it is your second drive and not the 'Recovery' partition.
moper
 

2 more replies
Answer Match 88.62%

Hello. I am having trouble with a message in Action Center in Windows 8.1. It is saying "Check Backup Disk Space" and I cannot hide the message. I had Windows 7 File Recovery setup with Windows 8.1, but now after the upgrade, the message is "stuck." Can this be fixed? These two links explain it perfectly:

Windows 8.1 Update - Check backup disk space - Microsoft Community

Windows 8.1, can't remove "Check backup disk space" error in action center - Ars Technica OpenForum

Please help. Thanks.

A:"Check Backup Disk Space" Error Windows 8.1

See picture:

2 more replies
Answer Match 88.62%

Using XP SP-1, 40GB HDD
A folder named "System Volume Information" has been created in each drive (C:,D:,E:,F: )
and consuming significant disk space day by day. Whether deleting these folders will create any problem. Any other technique to stop increasing the size of these folders ? Please suggest.
Presently consuming more than 3 GB in total.
Sometimes I need system restore to speed up the PC (besides other registry tools ) ..therefore this function is enabled in the system.
 

A:Too much disk space consumed for "System Volume Information"

9 more replies
Answer Match 88.62%

I got the warning msg that my drive "E" (system restore) was almost full. I did a disk cleanup, and a delete all restore points (including system...). After deleting approx 25 restore points and I've deleted down to 2 currently (new ones) and the only way I could get them to go was with CCleaner, My disk now shows only 4.2 free of the setting of 10.6GB. I cannot find what it taking up over 6GB on my recovery disk. What has it gone for....? I searched the internet several hours but can't find the answer. Any help appreciated...TJ

A:Unable to increase free space on Recovery Disk "E"

System Restore points take up space on C, rather than in E or a recovery partition in my experience. A recovery partition is normally put there by the manufacturer to allow you to restore to factory specifications if needed. I wouldn't ever deliberately put anything else on a recovery partition.

Who made this PC?

Can you post a picture of Windows Disk Management so we can see a visual display of your partitions?

3 more replies
Answer Match 88.62%

When I couldn't delete the student office trial (which came installed with my HP laptop purchase) from "add/remove" due to having deleted first, a different but associated program (can't recall the name), I followed these tedious instructions found on this link - http://support.microsoft.com/kb/928218

The problem is...I noticed that instead of freeing up disk space, it took up more. How can I remove this trial completely to free up space?
 

A:Office Trial Removed From "Add/Remove" YET Ate Up Disk Space

ellaphant5 said:


due to having deleted first, a different but associated program (can't recall the nameClick to expand...

This can be a problem.

Also, I would say that fix from MS applies only to when the proper procedure for the uninstall of Office is followed but the end result is not what we expected so basically that didn't wasn't any help.

We need to know what other mystery "associated" program is.
 

1 more replies
Answer Match 88.62%

when i try to run word 2007 i get the following error message:
There is not enough memory or disk space to run word 12

I have 1Gb RAM with 550Mb free and 2Ghz Turion with 7Gb free space on the system partition and 15Gb free space in the other partition

can any tell me why its doing this?

thanks
 

A:OFFICE 2007 - "Not enough Memory or Disk Space to run word 12"..?

7 more replies
Answer Match 88.62%

Hi there!
First of all thanks for the great toturial and the forum.

I tried to do the in-place upgrade from Windows 10 (build 1607) in order to "repair" my system (there are some quirks I want to get rid off) using a freshly created USB (as per description), but it fails with the message "make sure that there is enough disk space available in your PC" (rough translation from german; see attached screenshot) without any further information.

It then automatically cycles back to the question on how to install (i.e. with keeping data and apps or without) and then back into the above mentioned error message.


This is what I already tried or made sure of prerequisites needed:
I have made sure that there is definitely enough disk space available.My C: partition (where windows resides on) is 106 GB large and has currently over 58 GB of free space available.The system partition that is supposed to be 350 MB is still 350 MB (I read something about this potentially being reduced to 100 MB by other tools ...).I have deinstalled the Kaspersky anti virus tool (reinstalled it now after several tries with no success).I have disabled (i.e. fully decrypted) the disk encryption bitlocker on all disks.

My partitions (as seen from "Mini Tool Partition Wizard" and "Disk Manager"):
Do you have any ideas on what else could be wrong?
What intrigues me most is the fact that there is no further information in the error message on what or where is missing... Read more

A:In-Place Upgrade fails with message "not enough disk space"

Hi, Mark and welcome to Ten Forums.
Have you tried to mount the ISO in File Explore, instead if using an USB stick?
I just download the current ISO here: Windows 10 ISO , mount it in File Explorer and run the setup.exe.

22 more replies
Answer Match 88.62%

I am attempting to transfer all of the files form an NTSF 250 GB external drive to an empty FAT32 250 GB internal drive via USB.

I keep getting an error message that says "Cannot copy (filename): There is not enough free disk space. Delete one or more files to free disk space, and then try again. To free space on the drive by deleting old or unnecessary files, click Disk Cleanup".

This is not true though, as the destination drive has more than enough space for the transfer.
 

A:False error - "not enough disk space" durring transfer

You cannot transfer all the files because many will be in use...

You will ned to make a drive image with a program like Ghost, or you can even use its drive copy feature.

It will be cake to copy an entire drive.
 

3 more replies
Answer Match 88.62%

Hi there,

I am facing a problem with the backup program of Windows 8. My computer (Asus with 250SSD) disk is new and I just installed my programs. Now I want to create a System Image using Windows. The image should be around 50go. Everything works fine until I get a message error saying my external disk does not have enough space, which is impossible since it is completely empty (500go).
Did anyone have ever meet that problem and/or have advices to help me? I would like to solve that and not be forced to used another way to backup.

Thank you,

Vari

A:Create system image failed - "not enough space on disk"

Is your second disc formatted NTFS?

7 more replies
Answer Match 88.62%

I first notice my notebook begins to have this issue when I tried to update my Windows. It returned me with error code "80070008", which says that my computer might have run out of memory, however, there are 200GB space available
in my C: drive, and I am only using 27~30% of my RAM out of 8GB.
I tried to perform DISM 'ScanHealth' and it returned me "Error: 8 - Not enough storage is available to process this command".
At first, I tried to ignore this issue as I thought it did not cause me any major trouble. But I was wrong. Several USB devices become unresponsive (yellow exclamation icon at Device Manager).
When I tried to manually install drivers, that's when I found out it was this STORAGE insufficiency again that cause me trouble:

"Windows found driver software for your device but encountered error while attempting to install it.  - Not enough storage is available to process this command".
Some of my programs also become incredibly laggy ever since this issue arises, yet I don't know where the problem lies. 
At Event Viewer... I noticed several error messages regarding
"Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights. - DETAIL: Not enough storage is available to process this command".
I also caught a glimpse of one error that I think stated more clearly:
"Application popup: Windows - Low On Registry Space: The system has reac... Read more

More replies
Answer Match 88.62%

Is it possible this can do any harm to my computer?

 

A:Quick question about the option "compress drive to save disk space"

I have never knwon it to, it doesn't delete any of your wanted files, only temporary junk!
David
 

3 more replies
Answer Match 88.2%

Windows Update trying to install KB2976627, continually receiving error that I do not have enough disk space remaining to install the update. My OS Drive has 75 GB Remaining. Does anybody have any idea what causes this problem and how to remedy it?

A:Windows Update error, "not enough disk space..."

Time to do a Cleanup of your system:
Windows Update Cleanup in Windows 8

4 more replies
Answer Match 88.2%

Doing some maintainence on my computer, i am considering doing this option: "Compress drive to save disk space". There is also a "compress old files" to save space

are these both the same things? (same drive)
can i undo this options? im a big fan of reformatting to undo problems in the event its challenging to undo compress a file.

thanks
 

A:"Compress drive to save disk space"

6 more replies
Answer Match 88.2%

I receive daily a "Low Disk Space" error message which is incorrect and in my estimation fradulent. It goes on to give an alternative to rectify this situation by offering to "Speed up your computer and remove all viruses that are on your computer." Of course all of this is for a price. If you opt in and then change your mind before you totally commit they offer the same package for half price. I refuse to be "sucked in" by this fraudulent company.

I have gone to the internet to try and find out how I may get rid of this enemy. I have used Malwarebytes, Microsoft Security Essentials and Microsofts Security fix program all to no avail. I am at my 'wits end' trying to rid my computer of this plague. This is the url that the message comes through as. I cannot find out any source that will identify its origin: http://static.salesresourcepartners.com/g/?z=1&ilmernzkvtaztu=002618B38EDC0810&pu=cGlja3VwaG9ja2V5LmNvbQ==&s=iexplore&nm=ilmernzkvtaztu&t=aHR0cDovL3d3dy5waWNrdXBob2NrZXkuY29tL2ZvcnVtL3RvcGljLmFzcD9UT1BJQ19JRD0yODIzNw==&r=1

I need help.

Thanks,

Doug. Bell
 

A:Fake "Low Disk Space" error message

16 more replies
Answer Match 88.2%

There's not enough disk space on drive C where Nero 7.57 is installed; but, there is on drive E. I set Nero's cache folder to E:\NeroTemp and and Windows temp and tmp environment variable to E:\Temp where there is over 100 Gigs of free space and restarted the computer; but, there is no change with Nero's insufficien-disk-space error.

And, yes, I did create those folders for drive E.

What to do?
 

A:Nero aborts with "not enough disk space" error.

9 more replies
Answer Match 88.2%

I used Creative Lab's Wave Studio for years with a single problem.

I loaded it onto my sister's computor and the first time I tried to save a file, I got an error message saying:

"There is insufficient disk space to save (file name)."

She had several gigs of open space so I just chalked it up to something funky of her PC.

A few weeks later, my HD crashed, so I installed a new one and re-loaded my software. When I fired up my Wave Studio (version 4.02), I got the same message. Now I had roughly 75 GIGS of free space.

I'm not a newcomer to the world of software troubleshooting, but this one has me stumped.

Any help would go a long way to restoring my sanity.

Rich
 

More replies
Answer Match 88.2%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 87.36%

"Not enough memory to run microsoft excel. Please close other programs and try again"
So this morning I tried to open up excel, and this message comes up. Same happens for word.
Then I try and open it again and it wants to run in safe mode, and then the same problem happens.
Then I open it again and it says "Excel failed to launch in safe mode. Do you want to start Detect and Repair?"
So I run that and it says setup completed successfully. But I try and open it and I get the original "not enough memory" message, and it's just a big loop.

I have enough memory, 3GB and I'm using office 2007 on windows 7.
It's been running fine since this morning.
 

A:"There is not enough memory or disk space to run excel"

How about diskspace that's ' memory' too.
The environment settings voor %TEMP% could be invalid?
 

3 more replies
Answer Match 87.36%

I am getting this window popping up every 2 or 3 minutes despite clicking on it and ticking the usual boxes to remove the unwanted files - 3 minutes later back pops the warning

its as if the pc doesnt know I'm actually doing it

I have followed this advice given to someone else on another site

"Insure the temp files in the hidden Local Settings folder are deleted.
Start>My Computer> Local Disk C> Computer user name> Then go to tools (at the top)> Folder Options>View and put a dot in show Hidden Files and Folders Click OK> Open the Local Setting Folder>Temp> Delete all the files you can in the temp folder.
3. Run Disk Clean from the Start>All Programs> Accessories> System Tools>Disk Clean Insure you remove all the compress old files.
4. Get Rid of the Restore points and Lesson the amount of disk space System Restore uses.
Right click on My Computer>Properties>System Restore and put a check in turn off system restore now click on the Settings Button Choose a setting of 1 - 5% click apply and OK
Go back and TURN ON system restore, insure the amount of disk space for system restore did not default to the Max amount."
but it hasn't made any difference whatsoever

could this be a virus? I ran malaware and then 'search and destroy' but that made no difference either

I have an Acer Aspire T1 2OE
 

A:incessant "low disk space" warnings

16 more replies
Answer Match 87.36%

I'm getting the Low Disk Space message in Windows XP. Well, DUH...I knew that I was running out of room, so I bought an external hard drive with more space than I'll ever fill. Like an idiot...when I got the external.....I just went to folders...sometimes programs and used "send to" the now G: drive. Yes, I know, that was STUPID! Many of the same files are duplicated, etc so that they were copied and sent....not actually MOVED. Some of my programs don't even work correctly anymore.

I know that I can do a system restore....but I'm almost afraid that it might crash my pc. What is the easiest way to fix this problem and put everything else, except my bare essentials, on the bigger drive?

Thanks!
 

A:The dreaded "Low Disk Space" message

bumping this hoping to get some help
 

3 more replies
Answer Match 87.36%

Forgive me, but I?m new to the forum and relatively new to [rebuilding] computers (compared to some of you, I?m sure?) I do have a tech background.

Having said that, I had to do a re-install of XP (SP1) on a Dell Optiplex GX620 that I have. While at it, I upgraded the HD to 1.5TB (Seagate Barracuda)

The XP install went well. I did not have a restore disk for the drivers, so I went to Dell?s driver download website and downloaded the correct drivers for my model/service tag.

I put the drivers on a USB flash drive and moved them/loaded them onto the Dell. I installed the drivers in order and most installed fine. A few however, such as the Broadcom 57XX Gigabit Divers, are telling me that I am out of disk space. I get the error and a dialog box says that the volume on the C: drive is -650GB, and I have -655GB Available, with 2328KB Required and Differences of -650GB? I have no-idea what?s going on here, but I can?t seem to install the driver(s).

I did Disk Clean-up, defrag, chk disk, Ccleaner? blah, blah, blah? I am only using 1% of the available drive capacity.

Any ideas?

A:New O/S and driver install "Out of Disk Space"???

BUMP... Does anyone know whats going on with this? It's a simple re-install and driver install problem; not a virus or anything weird.

Someone has on this forum has HAD to have seen this before.

Please help.

Thanks.

5 more replies
Answer Match 87.36%

In Explorer on Computer, is there a way to change the number of gigabytes or percentage that Windows uses before it changes from the blue bar to red? For instance, I have an array that is 1TB, but it still has over 15GB free on it, but Windows interprets that percentage as the drive being low, so the bar appears red.

To me, I don't want that bar red unless there is say, 5GB remaining, or maybe even 1GB. 15GB still goes a long way, even though it is a small fraction of 1TB.

Ideas?

A:Changing the Disk Space Bar "Low Level"

  
Quote: Originally Posted by muzicman82


In Explorer on Computer, is there a way to change the number of gigabytes or percentage that Windows uses before it changes from the blue bar to red? For instance, I have an array that is 1TB, but it still has over 15GB free on it, but Windows interprets that percentage as the drive being low, so the bar appears red.

To me, I don't want that bar red unless there is say, 5GB remaining, or maybe even 1GB. 15GB still goes a long way, even though it is a small fraction of 1TB.

Ideas?


15Gb out of 1Tb would be considered low to me.

2 more replies
Answer Match 87.36%

I have to harddrives, drive :C/ and drive D :/ drive c has the basic miniums and came with 16 gbs of space which is completely full with windows , then drive d has 136gbs and is 103gb of free space left
ANYTHING i try to download i try to make it go to Drive D but none the less i keep getting the error "not enough disk space"

this is a brand new system, that a friend whos good with computers built for me for my gaming needs, i have a

intel r core tom 2 quad cpu 6600 @ 2.40GHz 4 gb ram 64 bit operating system..

if you can help or need any info please let me know where i can find the info for you on the computer im pretty crappy with computers so i need all the help ican get

A:keep getting "not enough disk space" with 2 hard drives

anyone have any ideas? this is getting really frustrating....

2 more replies
Answer Match 87.36%

Hi

I have recurring problem, which I have noticed on PCs other than my own. The used space on my hard disk drive is approximately 5GB higher than the total of all the files on it. (It's always been around 5GB, every time I've seen it). The only thing I can do is to reformat the disk, and it will be fine for a few months, and then the same amount will "disappear" again. Disk cleanup, ccleaner, etc don't help, and it's not the recycle bin or temporary files.

It happens on my primary (Windows XP) partition, but not on the secondary partition, and last week it happened on my external hard disk after I deleted a large quantity of data.

I only have 60GB in total (30GB on the primary partition) in my laptop, and 40GB on the eternal drive, so its pretty annoying to lose 10GB. If it makes any difference, my external drive is a 2.5" laptop drive, a Hitachi Travelstar, NTFS formatted. Not sure what brand is in the laptop, but it's FAT32. But I've seen this happen on a friend's desktop too (again only on the primary partition).

Any ideas why this happens and if I can do anything about it that doesn't involve reformatting?

drawde
 

A:"Lost" hard disk space

Tell me if I'm teaching you to suck eggs, but what size blocks do you have on your drives, because without decent sub-block allocation, you'll often lose parts of blocks for files when they're smaller than the block size. Even with sub-block allocation, you'll still lose a bit because of the overheads, but 5GB seems a little steep for that size of disk.

If I compare my size of files, with size on disk, I'm losing ~1-2% of the disk. That's with the default block size of 4K. But it probably depends on the number of small file you have around the place.

After deleting a large number of files, it's probably worth-while running a disk cleaner to make all the blocks contiguous again, and that should give you back most of your space, but if they are really not getting re-allocated as free space, then I'll have to dig more.

Rich.
 

1 more replies
Answer Match 86.52%

I keep getting a message telling me that "to free up disk space, Outlook Express can compact messages." It pops up every time I attempt to close OE. I've clicked to start the compacting process several times, but invariably I get a message telling me: "The folder is currently in use by Outlook Express or by another application." At that point I click Cancel to close it out. In other words, I cannot get the compacting process to run its course.

Unfortunately, this sequence of events keeps happening again and again, and I don't know how to stop it. I would greatly appreciate hearing from someone who might have an answer to this problem. Thank you.
 

A:Solved: Why do I keep getting "OE can compact messages" message"?

6 more replies
Answer Match 86.1%

I just resolved an issue I had with the wireless connectivity of my Acer notebook computer and now I am getting strange error messages. When I try (not every instance) to open device manager I will get the message "Failed to open empty document." From there I will occasionally get "Parser" messages that say "Value creation failed at line 843" or "line 422." I read what I could find about these messages and it points to MMC as the cause. How do I go about fixing this annoying problem if anyone knows?
 

More replies
Answer Match 85.68%

Hi everyone,

I've been having this prblem for several months but recently it has been getting worse. I'm working on an Dell Optiplex gx280 windows xp professional sp2. Here is the problem, while I'm working on my computer (doesn't matter what I'm doing) I will get an error msg "low disk space" flash on my screen, then my monitor will shut off, but the power light on the computer stays on (sometimes flashing). I'd have to power it off and turn it back on and it would log in normally. This morning it happened 3 times, please help. Thank you in advance.

-jdaries-
 

A:"low disk space" error

6 more replies
Answer Match 85.68%

I have a Compaq Presario with Windows XP Home Edition. I keep receiving the above message. How do I get rid of it? Yes, I know it means I don't have enough disk space on my D Drive, but how do I fix it? It won't defragment because it needs more space (I have only 45 mgs.) My D Drive is solely for Restore so I cannot delete files from there. Can I enlarge the D Drive?

Thanks, gb
 

A:"Low Disk Space D Drive"

16 more replies
Answer Match 85.68%

One of my users was working in Corel Word Perfect 9.0 and experience an "out of disk space" error when she tried to save her work (just a small document). She was working over our TCP/IP network using Win2000 terminal server and saving to a Linux file server. I was at the server so I was able to save the file with a different name but I can't figure why she would get that error as there is plenty of space on the Linux server. Has anyone ever seen this before? Thanks
 

A:"out of disk space" error

Just a wild guess but is there possibly a setting somewhere that may limit the amount of storage space a user can use, on a user by user basis? If so, you may just need to increase the setting for that user.
 

2 more replies
Answer Match 85.68%

Dear Experts,

I have created windows image on Drive F: but delete it after some time manually due to some space prob.
But while backup shows about 40 GB only few GB space got free after deletion. When i try to again take the the backup using windows 7 backup & restore option, its still shows 35 Gb of System Image in drive F: when i brows the Manage Disc Space option but i cant find it on the same drive. (Plz see attached pic)
Plz help me to locate this and delete the same.

Thanks

A:Cant find "System Image" of 36 GB but its shows on "Manage Disc Space"

Hello sattyaji, and welcome to Seven Forums.

It may still be showing if the system image was created as part of a Windows backup. Using the tutorial below to reset Windows Backup should clear it for you, but you will need to set up your backup again afterwards.

Backup User and System Files - Reset to Default Configuration

Hope this helps,
Shawn

5 more replies
Answer Match 85.68%

Hi Everyone,

i am using CRichEditCtrl::GetLine() function to read the text from a dialog.
If my text contains any space character then it is throwing improper argument error and the application getting closed in vista only.....
What is the actual problem ????? why it is happening with vista only...?

Please suggest

More replies
Answer Match 84.42%

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

A:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

1 more replies
Answer Match 84%

Could some please explain the correct sequence or syntax of the http entries in the Internet Explorer’s browser address line to invoke the name and password entry box for a D-Link Camera, when accessing it remotely?

I have a dynamic host, which has an address that is entered in the browser's open box, in the following format:
http://servername.dynamichostnameortnumber. The port numbers are the ports assigned to the two cameras. The server name is the same server name that is assigned to the router and the DYNdns host. The dynamic host name is set up with DYNdns.org and has been tested using their tools and is reported as working.

I have tried the remote (internet) access on computers running both Windows XP home and professional, service pack 3.

The cameras are DCS-6620G 802g Wireless cams. Have configured cameras. If I am on my wireless intranet, I can access the cameras by either typing in their local IPs into the open box on the File Menu of Windows Internet Explorer or by using the IP Surveillance Software, no problem, so far. Each camera has an internal static IP, and each has been assigned its own HTTP port number which has been forwarded to the respective static IP in the Linksys WRT54G router.

Each Camera has an administrator name and password that has been saved. When accessing on my intranet, either through IE or the Surveillance Software, there is a drop down box that opens to input the name and password. This works fine on the intranet.

The problem is ... Read more

A:"401 Unauthorized" and "Protected Object" Error Messages

Please don't post duplicate threads. If your thread is in an inappropriate forum, please report it and a moderator will move it.

Continue the problem resolution here: http://forums.techguy.org/networking/865180-401-authorization-protected-object-error.html
 

1 more replies
Answer Match 84%

I have a home network of five computers where one acts as a common computer ("server") where most data from the other four computers is stored (music, pictures, word processing, movies, etc). All five are running XP Pro SP2.

The "server" had two 80GB hard drives, but SMART was indicating that one was failing, so I replaced it with a 200GB drive. Now, every computer in the house can access the 80GB drive and all of its files but none of the computers in the house (except the "server") can access the new hard drive. I have the file sharing set to full access, and I can view the file folders that are on the drive from the networked computers, they are all listed. But when I click on a folder, I get "Access is Denied." When I mouse over a folder, it reads, "Folder is Empty"

But the folder isn't empty though when accessed from the local computer, only when trying to access it over the network.

I have turned off the Windows Firewall, turned it on again, off again, etc, no change. I have Zone Alarm on all the computers, turned it off, still no change.

Any ideas??? I have over 500 CDs on that harddrive, and I want to listen to music from my other comuters! I'm going nuts here.
 

A:"Access Denied", "Folder Empty" messages

There are two ways that might work.

1. From a computer other than the server right-click "My Computer" and choose "Map Network Drive". Where is says "Folder" type "\\<ip address>\C$" if you want to share the C partition of that drive (don't type the quotes).
2.
Go to My Computer and and click on the Tools Menu and then Folder Options.

Click the view tab.
Scroll all the way down until you see "Use simple file sharing (Recommended)" and uncheck it.
Click OK.

Now right-click the drive you want to share and choose "Sharing and Security".
Click the security tab.
Click "add" and add "Everyone".
Give "Everyone" the rights you want them to have "Read only" or whatever you want.
 

2 more replies
Answer Match 84%

"401 Authorization" and "Protected Object" Error Messages
Could some please explain the correct sequence or syntax of the http entries in the Internet Explorer’s browser address line to invoke the name and password entry box for a D-Link Camera, when accessing it remotely?

I have a dynamic host, which has an address that is entered in the browser's open box, in the following format:
http://servername.dynamichostnameortnumber. The port numbers are the ports assigned to the two cameras. The server name is the same server name that is assigned to the router and the DYNdns host. The dynamic host name is set up with DYNdns.org and has been tested using their tools and is reported as working.

I have tried the remote (internet) access on computers running both Windows XP home and professional, service pack 3.

The cameras are DCS-6620G 802g Wireless cams. Have configured cameras. If I am on my wireless intranet, I can access the cameras by either typing in their local IPs into the open box on the File Menu of Windows Internet Explorer or by using the IP Surveillance Software, no problem, so far. Each camera has an internal static IP, and each has been assigned its own HTTP port number which has been forwarded to the respective static IP in the Linksys WRT54G router.

Each Camera has an administrator name and password that has been saved. When accessing on my intranet, either through IE or the Surveillance Software, there is a drop down box that opens to... Read more

A:"401 Unauthorized" and "Protected Object" Error Messages

Please don't post duplicate threads. If your thread is in an inappropriate forum, please report it and a moderator will move it.

Continue the problem resolution here: http://forums.techguy.org/networking/865180-401-authorization-protected-object-error.html
 

1 more replies
Answer Match 84%

Could some please explain the correct sequence or syntax of the http entries in the Internet Explorer’s browser address line to invoke the name and password entry box for a D-Link Camera, when accessing it remotely?

I have a dynamic host, which has an address that is entered in the browser's open box, in the following format:
http://servername.dynamichostnameortnumber. The port numbers are the ports assigned to the two cameras. The server name is the same server name that is assigned to the router and the DYNdns host. The dynamic host name is set up with DYNdns.org and has been tested using their tools and is reported as working.

I have tried the remote (internet) access on computers running both Windows XP home and professional, service pack 3.

The cameras are DCS-6620G 802g Wireless cams. Have configured cameras. If I am on my wireless intranet, I can access the cameras by either typing in their local IPs into the open box on the File Menu of Windows Internet Explorer or by using the IP Surveillance Software, no problem, so far. Each camera has an internal static IP, and each has been assigned its own HTTP port number which has been forwarded to the respective static IP in the Linksys WRT54G router.

Each Camera has an administrator name and password that has been saved. When accessing on my intranet, either through IE or the Surveillance Software, there is a drop down box that opens to input the name and password. This works fine on the intranet.

The problem is ... Read more

More replies
Answer Match 84%

Can you please tell me the steps for removing the following messages-
they appear when the computer starts.
"c/windows/inf/other.exe" "c/windows/system32/config/win.exe"

Note: I have followed some steps to check if there is virus, this is ok, no problem with virus.
I just don't want to see this message appearing! It irritates me! Help!!!

Thanks a lot!

More replies
Answer Match 83.58%

Hi,

I was working on a large document on Microsoft Word 2010 (Home and Student), saving as I went along as usual, until I tried to save it again and instead received the above error message. When I clicked "OK", a second error message appeared: "There is not enough memory or disk space to update the display". The fonts were all changed, and the pages appeared in the draft layout. I've uploaded the document onto OneDrive and opened it via Word Online, and it's opened fine - formatting is all correct and I haven't lost any work.

My laptop is barely a month old, and the C: drive has plenty of GB free. I've performed a disk cleanup, and the laptop is currently in the middle of a full anti-virus scan. I'm still getting to grips with using Windows 8, and I've never had this message before on any version of Word, so I don't really know what to do. How can I fix it?

Thanks in advance for any help.
 

A:Solved: Word 2010 error: "There is not enough memory or disk space to complete the op

7 more replies
Answer Match 82.74%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Answer Match 82.74%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Answer Match 82.74%

I have a virus that eats up all of my available disk space. I have deleted most of my programs, and after the deletions are done, the space I made available fills right back up again. I ran (online) Norton/Symantec, trend micro house call, and AVG. I had to do it online since I need more disk space to run a resident virus program. The only way I can stop the monster from filling up any space made avalable is to delete a program and come up in safe mode. As soon as I reboot to full windows , the space I made availabe fills up. It seems to leave at least 170 to 200 Meg available. The PC is a Dell laptop with a 10 gig drive. And at this point, few programs!

More replies
Answer Match 82.74%

I downloaded the game in Winrar format on the desktop and when I tried to extract it to specific folder,I have this error message:-

There is not enough space on disk
Write error: only NTFS file system supports files larger than 4 GB

On my local C: drive I have more than 15 GB available.What do i do now?
Help is very much appreciated.
 

A:"not enough space on disk"???

Your hard disk is FAT32 format? The problem is that the file is larger then 4 gigs, so a FAT32 HD can't handle it, what u need to do is reformat ur computer so its NTSF. Except that means you will lose everything on your drive I think
 

3 more replies
Answer Match 82.74%

Can anyone suggest a remedy, please?
I recently ran a full PC recovery from my back up DVD-ROM disks. This was about the fifth time I've had to do it, due to infections, etc.
I have 3 recovery disks, but it only ran disc 1, and never asked me to put in the other two...
When I rebooted, I soon realized that I only had 1 or 2 GB of free space.
The C: drive is around 80GB in size and obviously should not be this full.
I suspect it may have to do with the partitioning, or something I did in my previous 4 system restores...
By the way, the last time my HP crashed (about 2 months ago), I got fed up with Windows and tried to install Linux, but I was never able to figure out the code or process necessary for Linux to run my wireless driver, and couldn't connect to the internet, so I reluctantly just re-installed Windows from the disc.
Can anyone help, please?

A:help with "Low Disk space"

Why not scan your hard disk with a disk space utility like showsize(showsize.com)? See what you come up with. You will be able to see the largest folders on the folder sizes report and the largest file on the Only files report (if you sort on Size column).

4 more replies
Answer Match 82.74%

hi. i'm new here. nice to meet all of you!
just like a lot of folks i'm sure, i've come here because there are some weird things running on my pc that shouldnt be in there.
please help!!!!!!

heres the hijack log
(thanks in advance. i don't know much about this computer virus stuff.)
~eric

Logfile of HijackThis v1.99.1
Scan saved at 10:06:40 AM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Dantz\Retrospect\retrorun.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\SYSTEM32\qttask.exe
C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\PROGRA~1\VERIZO~1\HELPSU~1\VERIZO~1.EXE
C:\PROGRA~1\VERIZO~1\HELPSU~1\SMARTB~1\MotiveSB.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\PROGRA~1\Sony\SONICS~1\SsAAD.exe
C:\Program Files\Common Files\Verizon Online\ConnMgr\cmisrv.exe
C:\Program Files\Windows Media Components\Encoder\Wmencagt.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\ZoneLabs\isafe.exe
C:\Program Files\Common Files\Verizon Online\AppMgr\vz... Read more

A:"windows no disk" and "winsilly" "win956temp"

11 more replies
Answer Match 82.32%

Hey everyone, here is my serious problem.

Unfortunately, I was stupid enough to let my "Free Space" on my entire computer get to less than 5 GB left. It may possibly have been at 4 or 3 GB, actually.

My computer then froze, and I went to restart it. However, it would just take me to the blue screen of death. I've tried booting it up in every way I could think of, in normal mode, in Safe Mode, with the "Repair Windows" option, and everything else. My computer will simply not get past the "Loading" screen.

On the blue screen of death, it does say "Check to see if you have adequate disk space", so I am guessing that is a big part of the problem.

But here's my question. How do I free up disk space when my computer cannot even run?

*Note: I've tried going on the BIOS and Advanced Start Up, but I can't seem to find any options that would help with my situation..*

A:BSOD: Cannot start up normally, cannot start up in Safe Mode, "Inadequate Disk Space"

Hi,

Use Ubuntu to free the space.

You can get it from here: http://www.ubuntu.com/desktop/get-ubuntu/download

Step #2 on that page shows you how to create the USB/CD.

Then once you boot into it (choose the option where it just runs off the USB/CD) you can use it to delete your files or to copy them from the Windows Drive to an external hard drive (Note: Do not copy anything to the Ubuntu Filesystem as it will not be saved on shut-down)

Regards,
Reventon

3 more replies
Answer Match 82.32%

I have almost 2 Gb of music on my computer that I'd hate to lose. And hate to have to rebuy or redownload too.

So what I'm wondering is... can I back up all that music on 3-4 700mb disks as a data disk instead of making a 70 minute music disk?

I have Sonic RecordNow that I use for music burning and data backup. I'm just wondering if it is possible to back up 1/3 of it in a folder as a data disk, and do the same for the other parts.

Possible? Would this work?

It would make much more sense to have 4 disks that although you could not PLAY them in a CD player as the songs would be stored in a folder on it, to just be able to copy them out onto another computer instead of making 20+ audio CD's.

Would my idea work? Help me out guys...
 

A:Backing up music as a "data" disk instead of a "audio" disk? Possible?

7 more replies
Answer Match 82.32%

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

1 more replies
Answer Match 81.9%

I get a number of these "task is corrupt or been tampered with" error messages when loading Task Scheduler.

In particular, I'm concerned about the System Restore task, found in \windows\system32\tasks\microsoft\windows\tasks\systemrestore (the SR task). I get the message and error code of 0x80041321.

I have lots of current and recent restore points in \system volume information.

I ran sfc /scannow to rebuild any problem system files.

vssadmin seems to show everything is ok with shadow copies.

I get the error message when running Control Panel...System...System Protection...Create. , so I cannot create a system restore point on my own. Restore points are created ok by Windows Update and other installer programs. I get "corrupt" message and error code of 0x80041321 when trying to run.

I have a clean system (no viruses) and am kind of stumped as to why these errors are occuring.
 

A:Solved: Task Scheduler "corrupt or tampered with" error messages

9 more replies
Answer Match 81.9%

I loaned my USB flash (Imation Atom 4GB) disk to a colleague; it was working fine when I gave it to her. She could not dismount the disk from her netbook, even after everything was closed. The computer kept saying the disk was in use. After 5 minutes of this, I pulled the disk out and put it into my machine.

First, Microsoft Security Essentials found and removed “Worm:Win32/Autorun.gen!inf.

Next, I was given the message "Do you want to scan the disk for errors?" I clicked 'yes' but got a "Windows can't check the disk while it is in use. Do you want to dismount the volume first?" I click on "Force dismount" and received a message "Windows can't check the disk while it is in use. Do you want to check for hard disk errors next time you start your computer." I check the box that says “Schedule disk check,” the box automatically closes. I re-start my computer, it boots up just fine, but does not appear to do any type of disk check.

I have no problems “safely removing the disk.” I can eject it every time without fail, but every time I plug the device back into the system, I receive the “scan and fix” prompt.

When I try to format the device, I am given the message "The drive is in use. Another program or process is using this device. Do you want to format it anyway?" I click "Yes" and receive the message "Windows cannot format this drive. Quit any disk utilities or programs that are using... Read more

A:Solved: Can't "Scan the disk for errors" or see any files ~ USB Flash disk ~ Windows

7 more replies
Answer Match 81.9%

Messages include ones asking if I would like to go to Yahoo.com, and others asking if I would like to connect to an unsecure website, why?!?
Logfile of HijackThis v1.99.1
Scan saved at 9:59:38 PM, on 6/27/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
C:\Program Files\ewido anti-spyware 4.0\guard.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\WiFiConnector\NintendoWFCReg.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\MSN Messenger\msnmsgr.exe
C:\Program Files\Hijack This\HijackThis.exe

R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page =
F2 - REG:system.ini: UserInit=userinit.exe
O4 - HKLM\..\Run: [!ewido] "C:\Program Files\ewido anti-spyware 4.0\ewido.exe" /minimized
O4 - HKLM\..\Run: [AVG7_CC] C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe /STARTUP
O4 - HKLM\..\Run: [Windows Defender] "C:\Program Files\Windows Defend... Read more

A:Solved: slower than usual comp and "random" messages...

6 more replies
Answer Match 81.9%

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

A:"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Answer Match 81.9%

These illegal operation messages just started popping up:
"ATTNENGN" caused an invalid page fault in module MSVCRT.DLL at 0167:780018ee.
"WEB" caused a general protection fault in model WEB.EXE at 0001:0000bb4c.
I haven't installed anything or downloaded and everything seems to be operating OK. But these messages are appearing for a reason and I would like to fix the problem. Thanks.
 

More replies
Answer Match 81.9%

Basic system description:
Desktop PC about 2 years old with:
Motherboard: Asus P5Q-E
Processor: Intel Core 2 Quad Q6700 @ 2.66GHz
RAM amount: 8GB
Operating System: Windows 7 Professional Service Pack 1 OEM 64 bit
Graphics Cards (I have two installed and software controllable CrossFire): AMD Radeon HD4850 driving 4 monitors. Driver version 8.961.0.0
Hard drive: 1 TB Western Digital WDC WD1001FALS-00J7B1

Crash situation and background:
The system tends to crash with no application running or all applications running. By "applications" I mean -other than standard chart and browsers:
1. Battlefield 3 Limited Edition.
2. Sierra Chart: Sierra Chart - Futures, Stocks, Forex Charting and Trading Software Platform
3. InteractiveBrokers.com
4. Picasa
5. Adoble Lightroom 4

Last week, I installed the latest drivers for most and including the video card drivers after a whole series of BSoD and also UNINSTALLED Battlefield 3 ... I thought I fixed the problem and this computer feels slightly faster, etc. Today, while I was away and while the computer is running item 2 and 3, the computer gave me a BSoD as per attached screen shot.

HELP!!!!!!!!!!!!!!!!

A:BSoD with "STOP:0x00000024" error and "Ntfs.sys"

Hello rting,
You have quite a few different types of crashes there.
Before we investigate the underlying causes it would be wise to do the following.

1. Asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).


2. McAfee is a frequent cause of BSOD's.
I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST!

http://download.mcafee.com/products/...tches/MCPR.exe

Microsoft Security Essentials - Free Antivirus for Windows

9 more replies
Answer Match 81.48%

I've recently started getting a series of bad image messages at start up and when I initiate a program for the first time. I have run Hijackthis and submit my log for any advice you may have.
Martyn
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 19:56:12, on 01/09/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\system32\DRIVERS\CDANTSRV.EXE
C:\Program Files\iPod Access for Windows\iPAHelper.exe
C:\Program Files\Kontiki\KService.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
F:\Program Files\Photodex\ProShowProducer\ScsiAccess.exe
C:\Program Files\Spyware Doctor\pctsAuxs.exe
C:\Program Files\Spyware Doctor\pctsSvc.exe
C:\Program Files\Spyware Doctor\pctsTray.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\alg.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WIND... Read more

A:Solved: "Bad Image" error messages at start up

Hi Welcome to TSG!!
Please visit this webpage for instructions for downloading and running ComboFix.

Post the log from ComboFix when you've accomplished that, along with a new HijackThis log.
 

3 more replies
Answer Match 81.48%

I have been bombarded with pop-up messages stating "STOP! WINDOWS REQUIRES IMMEDIATE ATTENTION. Windows has found 55 (or 47 or 37 or 36) Critical System Errors." Each message directs me to various registry cleaner sites, so I was wondering if these are just fear-invoking ads.

I ran jv16 Power Tools Registry Cleaner, but I continue to get these messages. I was apprehensive to download any of the programs listed in the pop-up messages because I was afraid I might be inviting another WinFixer 2005 crisis. Please advise the best course of action. I really appreciate any insight you can provide.

Here are the HijackThis and Ewido logs:

Logfile of HijackThis v1.99.1
Scan saved at 2:31:50 PM, on 1/15/2006
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Sygate\SPF\smc.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\System32\Ati2evxx.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:\Program Files\Northern Illinois University\NIU VPN Client\cvpnd.exe
C:\Program Files\ewido\security suite\ewidoctrl.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\wanmpsvc.exe
C:\Program Files\Common... Read more

A:Solved: "Critical System Errors" messages

7 more replies
Answer Match 81.48%

I have no idea what kind of problem this actually is, so hopefully this is the right forum:

First of all, I have Windows XP.

FYI, in case this is important, I recently acquired the following: Zone Alarm Anti-virus (had it for about a month), Sprint DSL (had it for about 2 weeks), Quicktime upgrade (just installed this the other day, and it also gave me iTunes, which I deleted) - so any of these programs might be to blame, or maybe it's something else entirely ...

The problem: the other day, I noticed that internet explorer wouldn't fully load ... it just gave me a blank window and the hourglass. So, I tried using Mozilla, and that worked. Then, later, when I tried to shut down my computer, it gave me a bunch of "End Program" messages, and took so long that I shut down the comp manually. So, I thought maybe there was a problem with too many internet files or cookies or something (since I recently got DSL and am online all the time now), so I used the control panel to delete all my cookies and temporary internet files, then when I restarted the computer, Internet Explorer worked again, so I figured the problem was solved. Then, the next time I used my computer, IE wouldn't load again, but Mozilla did, so I figured it was the same weird problem. Again, when I tried to shut down, I got the following "End Program" Messages: "AXWIN Frame Window," "DSAgnt.exe," "Task Panel," and "DDE Server Window." I trie... Read more

A:Solved: "End Program" messages, programs keep getting slower!

Well researching the AXWIN Frame Window, i found that if you run Adaware SE it will stop that error.

What is dsagnt.exe??

DSAgnt.exe is a process belonging to Dell Support which offers additional support and update features for your Dell computer or laptop. This program is non-essential process to the running of the system, but should not be terminated unless suspected to be causing problems. If you think there is sometthing wrong with it run this checker: http://www.liutilities.com/products/campaigns/plib/rbplib/6/

Taskpanel?? I would not know...
For that DDE Server Window, look here: http://support.microsoft.com/default.aspx?scid=kb;en-us;892850

This article realates to your IE not responding in Windows 2000 and Windows XP
 

3 more replies
Answer Match 81.48%

Hi all - hope you enjoyed the holidays.

Husband installed a Windows update this morning.

Upon reboot, system went into Check Disk and reported multiple errors.

Once Windows loaded, a bunch of DOS shell windows began opening.

Then every program he clicked gave an error message that the DLL file was missing.

He has IE running and MSN Messenger; no sound. I Googled one error message and then had him try to open Add/Remove Programs at the cmd prompt. It wouldn't, and the error message given was:

Error in shell32.dll

Missing entry: control_run.dll

NOD32 system scan hung up at 20% so he gave up on that.

He says his computer occasionally runs Check Disk on reboot. Are we looking at an infiltrator here or maybe a failing hard drive?

Thanks for anything you can offer. That is our "business" PC so he's freaking out, of course.
 

A:Solved: Bunch of "missing DLL" error messages

15 more replies
Answer Match 81.48%

I have a big problem here,
I have used my hard disk for 9month,
Yesterday when I watched movie on the half way,
My hard disk suddenly disfuntion,
And I thought my laptop problem due to always lagging so I restart my computer.
But after that I can't read my hard disk (WD)in my computer.
It can read in computer management there.

Ways I try:
1)I try to uninstall and reinstalled again,BUT it doesn't work.
2)I try to unchecked the hide folder and device at view.
3)I try to update the software BUT it still disfunction.
4)I try to use disk management and initialized it BUT there appeared CANNOT INITIALIZED Due to I/O device error.

Any solution for me ?

A:Hard Disk can't read in "my computer ", "initialized",I/O device error

The most usual cause is that the Hard Drive is beginning to fail. Back up your stuff. Go to the website of the manufacturer and test the drive.

8 more replies
Answer Match 81.06%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Answer Match 81.06%

I only have a 70GB hard drive and having recently used "treesize" have found that the reason I was always running out of space appears to be down to the 55GB of Windows INstaller Patches that are on the computer. I am sure that most of these are not required but have no idea what they are, what they do, or if they need to be there or not. As their individual sizes range from a few KB to hundreds of MB, I would like to delete as many as ppossible but need advice as to what / how.

I am running Windows XP on and AMD ppowered system

Many thanks

P
 

A:Solved: How can I recover space filled with "windows Installer Patches"

6 more replies
Answer Match 81.06%

I can't "extend" my "C" Drive even tho there is free space??
 
I have 251GB free and I cant add it to my C OS drive?
 
Picture:
 
http://img577.imageshack.us/img577/7577/helpc.png

A:I can't "extend" my "C" Drive even tho there is free space??

The Free Space is in an Extended partition.
Right click on the free space and delete the Extended partition. You can then extend the C partition into the Unallocated space released.

20 more replies
Answer Match 80.64%

Recently I noticed that my "C" partition, which ONLY has the "XP Pro" OS and a few related programs on it, has gone from 50% UNUSED space down to 35%. I have not added anything, except MS automatic downloads. There was one a week or so ago that seemed large. Could that be the cause of the increase? Are there files that 'grow' unnoticed that can be removed?

I understand that once the "C" disk (partition) is filled beyond 50%, "XP" progressively slows down. I do not want that to happen, and purposely created a partition twice as large as the size of "XP." If necessary, I could increase the size of the "C" partition.

Many thanks for responses, {redoak}
 

A:Solved: Decreasing "C" partition unused space - why?

9 more replies
Answer Match 80.64%

After Cloning a HDD with Acronis I get a low disk space warning For "D" partition, and the partition shows up red? I thought I did a proportional clone. The original drive was a 320GB, and the new drive I used was 250GB. Also because there was a little data loss on original drive in the "C" drive I wanted to do a complete restore using recovery on new drive and that doesn't work either! Thanks for any help.
 

A:Solved: After cloning HDD "D" drive low space warning.

7 more replies
Answer Match 80.64%

Hi all - I keep getting this message

"Low Disc Space" . When I click on the message it is
"D" drive, and the only thing in it is "the Recycle Bin" with 0 bytes in it!!

Can anyone tell me why I am suddenly getting this message? I am confounded

Thank you in advance. lennon

A:[SOLVED] &quot;Low Disc Space&quot; constant message!! Help -

Can someone please help me???

7 more replies
Answer Match 80.64%

My HDD shows 21GB+ free yet MS Word will not save and says "Insufficient memory. Not enough disc space". Norton AV and Trend Micro scans detected no virus, Add-Aware and Spybot found nothing either.

Had a quick read about [email protected] or [email protected] on Symantec's site and their fix warns that I may have to re-install Word afterwards.

Is there any way I can confirm this is the problem before I try their removal tool?

I have Word 2002 btw, any help will be appreciated,

TIA
 

A:Solved: MS Word says "insufficient mem. not enough disc space"

8 more replies
Answer Match 80.64%

Just yesterday I noticed these odd objects/designs/however you'd describe them (they look like space invaders or something) floating around my screen randomly.. They appear when different programs are open (I've seen them with WMP open playing video, with Acrobat open viewing a PDF, and even now with Firefox open) and they don't necessarily stay in the window that is open, they will appear even outside the window, but if I switch to a different window they will disappear.. It's quite odd.

Oh and if this helps, I now notice that I can see them while I am typing this, and part of them are blinking with the same rate as the blinking cursor. Then as I type, they blink at the same rate as when I type. Also when I scroll up or down they will blink at the same rate as I scroll...

Here's a pic of what they look like:

(They are the things that look out of place )

Has anyone seen these buggers before and/or know how to get rid of them?!

Many thanks!
 

A:Solved: "Space Invaders" have invaded my monitor?

Are they there in Safe Mode?...Have gone to the manufactures site and checked for any updated drivers for your Video card...

How to Start in Safemode

1. Restart your computer.
2. Before the windows logo you should gently tap the F8 key repeatedly until you are presented with a Windows XP Advanced Options menu.
3. Select the option for Safe Mode using the arrow keys.
4. Then press enter on your keyboard to boot into Safe Mode.
5. Do whatever tasks you require and when you are done reboot to boot back into normal mode..
 

3 more replies