Tech Problem Aggregator

Windows TOO large

Q: Windows TOO large

I have a DELL OPTIPLEX GX1 that crashed...I replaced the hard drive & updated from Windows 2000 to Windows XP Pro...Some where along the line my "RUN" box disappeared..I can get it if I safe boot..But also when I open some files the window is TOO large to access functions at the bottom of the page...I can NOT move the page up enough to use these functions...I tried to change the page size useing my mouse but I can NOT get close enough to the edges to do it...(off screen) I also tried to adjust the pixels on my display but that shrinks up EVERYTHING too small for me to use easily...Is there an adjustment some where that will correct this & maybe get my "RUN" box back ? ? ? PLEASE help...My name is Ron & you can contact me directly through e-mail OR thru this website...Thank you VERY VERY much...RON

A: Windows TOO large

Hi RM2007 !

What's the maximum display resolution you can set in the display properties ? You probably need to update your video drivers.

Your computer is pretty old and there doesn't seem to be any drivers for XP available from Dell's website.

Found these drivers from Ati's website : http://ati.amd.com/support/drivers/xp/legacy-xp.html. Yours should be the second one (under Rage Pro).

If your video card has the standard 4MB memory then once the drivers are installed you'll be able to set your display resolution to 1024 x 768 (85Hz).

About the run command, check that it's checked to appear in the sart menu properties :
http://blbsnj.wordpress.com/category/xp-tips/

5 more replies
Answer Match 43.26%

My grandchild was playing a shooting game, when suddenly the picture when sideways and there was large lettering.

I was able to upright the lettering, but still have the large lettering on the font.

I tryto get into a folder or program, but the large lettering prevents acessing all the information.

I was able to play TW08 golf game with no problems, but when I finished and returned to windows large lettering still there.

Have tried to find somewhere to reduce the size to normal, but unsuccessful.

Cheers
Brian
 

A:vista home edition large font large lettering

10 more replies
Answer Match 42.84%

I will shortly need to move a large number (20,000) very large (20-30Mb) image files and associated tiny xmp sidecar files from one hard drive to another.

MS file explorer will make a meal of this so any suggestions for alternatives please? I have several folders each containing many thousands of files as above so moving a folder en-bloc is an option rather than file by file?

A:moving large number of large files to new drive

Simply drag and drop the folder(s).

Might want to do a copy first, verify that everything did indeed get copied, and then delete the originals.

1 more replies
Answer Match 42%

When viewing large and extra large photo previews, the jpeg thumbnails will not load. Is this a 64 bit issue?

Any Ideas?

A:Large, Extra Large Icons won't load

I can tell you it's not a 64 bit issue as I do not have this problem.
Beyond that, I'll have to defer to another with more expertise in this matter.

2 more replies
Answer Match 42%

First post here on the SevenForums! I'm only saving the tough ones for you guys! Here's the problem:

My client's computer was infected with a virus obtained via Facebook. I removed this and multiple other infections (and I'm pretty thorough with my scanning). She gets it back, starts working on it, and apparently her devices and printers icons are blank. Not missing, like with a "blank page" icon, just... blank. Here's the kicker: it only happens with large and extra large icons. It also happens with normal folder icons. When I change it to medium or lower, they come back. I've tried rebuilding the icon cache database several times, tried sfc /scannow, tried chkdsk, tried uninstalling any recent updates, etc... There have been no hardware changes, the hard drive has been tested as good (no bad sectors), her dual monitors are at a sane resolution, and I'm confident that the viruses has been removed. Trust me -- I've tried all the obvious stuff I can think of. Thanks and Good luck!

Edit: Also, I did about 30 minutes of searching through previous threads. Couldn't find a thing, but I could have missed it...

A:Large & extra large icons blank

  
Quote: Originally Posted by Xileos


First post here on the SevenForums! I'm only saving the tough ones for you guys! Here's the problem:

My client's computer was infected with a virus obtained via Facebook. I removed this and multiple other infections (and I'm pretty thorough with my scanning). She gets it back, starts working on it, and apparently her devices and printers icons are blank. Not missing, like with a "blank page" icon, just... blank. Here's the kicker: it only happens with large and extra large icons. It also happens with normal folder icons. When I change it to medium or lower, they come back. I've tried rebuilding the icon cache database several times, tried sfc /scannow, tried chkdsk, tried uninstalling any recent updates, etc... There have been no hardware changes, the hard drive has been tested as good (no bad sectors), her dual monitors are at a sane resolution, and I'm confident that the viruses has been removed. Trust me -- I've tried all the obvious stuff I can think of. Thanks and Good luck!

Edit: Also, I did about 30 minutes of searching through previous threads. Couldn't find a thing, but I could have missed it...


Well you probably pulled some icon cache files off that were infected but also had the L and XL icons. If sfc didnt work you could try a repair install. It will re-install only the files with different hash marks.

Make a backup and restore point first just in case

Ke... Read more

9 more replies
Answer Match 42%

If you extract the icons from imageres.dll or shell32.dll then the maximum icon size is about 64x64 and 32x32 for most icons. I am trying to extract the largest icons, where can I get them. or am I just doing it wrong?
 

A:Where are the Extra-Large and Large Icons stored

16 more replies
Answer Match 40.74%

I go to Character map looking for the large i ,looks like 2 large T and the ohter one flipped over.Does Character map Not have this one ?

A:Character map missing the large i ,looks like 2 large T

the strange thing is after I posted this I see my I that I want ,but while i was typing i was only getting a capital i that looks like a line. Also when i copy and paste the correct I , after pasting , the i turns back into a stupid line. any ideas ?

3 more replies
Answer Match 39.9%

Hi,
Did Microsoft come up with the solution of this issue on Windows 8.1
https://support.microsoft.com/en-us/kb/2838018

re-build the index helps compacting the edb file but it will grow again
are there a Windows 8.1 patch available to address this issue?
the patch KB2836988 doesn't apply to Windows 8.1
https://social.technet.microsoft.com/Forums/en-US/127bab1c-f071-4057-a9c0-a997f1249f6c/how-to-install-kb2836988-or-is-it-valid-for-windows-81?forum=w8itprogeneral

Thank you
Andy

More replies
Answer Match 39.48%

I am currently trying to make a copy of the files on my laptop to an external drive but after 1 Gb of data is transferred the status box when copying stops and doesn't seem to be copying over any further files. When I try to cancel the process it does not register that I have pressed cancel and I have to shut off my laptop manually, waiting a few seconds before turning it back on.

I have uninstalled avast believing that it might be causing an issue with the transfer but the result is still the same.

Recently after a failed attempt it has rendered my hard drive back to an ntfs unreadable state due to error code 0x80070570 .

Any help to resolve either issue would be greatly appreciated, thank you.

A:Windows 7: Windows 7 stalling during copying of large files to externa

What is the external HD? How old is it? When was it formatted etc..

In any case I would run a diagnostic on the external drive.
Also try a copying utility such as TeraCopy free version and see if it has similar problems(once the external drive is returned to a normal state or using another drive.)

1 more replies
Answer Match 39.48%

I just bought a 160G hard drive, Seagate, to be used in an external case. Seagates software recognized it as 152+G but said that win 98 would only recognize as max of 137G unless I used their software and partition in 2 partions. This was Ok 1 partition at 80G and 1 at 80G. When all was said and done I only got 80 G and 1 at 57G, with 2 partitions. The partitions were done on a win98 desktop with drive as secondary slave. Any ideas as how to get more out of this harddrive.

Thanks for any help.
Go Cards!
 

A:Large HDD - Windows 98/ME

9 more replies
Answer Match 39.06%

my windows 7 (32bits) folder on the C drive is too large (21.1 GB) is there a way to clean it up?

I have deleted temp files and also run the commands:
cleanmgr sageset:99 (Check all the boxes)
cleanmgr sagerun:99

still the same size.
 

A:windows folder too large

Your Windows folder is within reason. Mine is slightly over 23 gbs.
 

3 more replies
Answer Match 39.06%

My windows folder takes 15.1GB of my 32GB on my C drive and the Winsxs folder inside it takes up 9.8GB, is that normal? My laptop has very few applications I installed and only one is over 1GB and its a bit torrent full of music(2.4GB) so does it really take such a massive supply of memory just to run it?

A:Large Windows Folders

What happened to all of my hard drive space on Windows Vista? | Xatal

4 more replies
Answer Match 39.06%

Just connected a new 1920X1080 TV to my PC and it's working great EXCEPT that Windows 7 is a little too large for the TV and stuff is getting cut off. Is there some feature to let me squeeze the system to fit the display on the TV?

Resolution on the TV and 24" monitor are both set to duplicate 1920X1080. The monitor displays fine. If I go to 1280X1024, everything fits perfectly, but I want to use the recommended larger resolution.

A:Windows slightly too large for my tv

Do you have a scaling, or scanning option for your tv? Check your video card settings, it should have a scaling option.

9 more replies
Answer Match 39.06%

I want to make the move to SSD on my notebook. However, I am researching and seeing that a 30GB SSD may be to small for Windows 7 64 bit Home Premium especially with future windows updates. I am trying to reduce my current Windows 7 64 install on my original 320GB drive to see how small of a footprint I can accomplish, but I end up only reducing the install to 32GB after all the tips I've read out there.

I have uninstalled everything I can think of and turned of system restore. Any other tips and/or advice is much appreciated. Thank you!

A:30GB SSD large enough for Windows 7 64?

  
Quote: Originally Posted by unknown


Any other tips and/or advice is much appreciated. Thank you!


Hi.

You could use a program like VLite to remove additional Windows components, but I would think 30GB is still too small.

9 more replies
Answer Match 39.06%

{28672A49-65A7-11E0-9BF5-00FF01000001} 4/18/11 7.5GB (7,908,378KB)
{7796876C-5958-11DF-9A44-E0CB4EF925B9} 5/6/10 795,152KB
{DB6E8734-53E8-11DF-BCB7-E0CB4EF925B9} 4/20/10 86,744KB

I noticed my C: almost filled up so I used my handy WinDirstat to figure out what happened. It looks like 10 days ago a huge file was created in my c:\windows directory. The filename looks like some HEX registry key of some sort. The curly braces are actually in the filename. I did some quick googling and didn't see anything like this. Any ideas what this could be? I tried moving it to my D: but the file is in use by "System". I'm currently at 3GB free out of 150, so I really need to clear this file out if it is not needed. I thought maybe it might be some corrupted swap file, but I have mine set to my D:

This is Windows 7 Ultimate 64bit

A:very large file in c:\windows

Go into safe mode, and rename it. Reboot normally. If your windows loads fine, then just delete the file.

3 more replies
Answer Match 39.06%

When I maximize any window, it resizes to just a little bit too large. The resolution of my monitor has not changed, I'm still running at 1280 x 1024, and have been for quite some time. But this is a recent problem (annoyance). I'm wondering if maybe this was caused by one of the recent Windows updates. I can't pin down when I first noticed it, but it's driving me nuts. Anyone have any suggestions?

A:Windows when maximized are too large

If you haven't done so already, right click on an empty space on the desktop and select resolution. Make sure the resolution is the same as your monitor. The correct resolution usually has (recommended) next to it.

7 more replies
Answer Match 39.06%

Just rebooted computer and all my windows, menu's, fonts etc have become very large.. how can u restore the size of these things back to normal?
 

A:Large Size Windows

6 more replies
Answer Match 39.06%

I need to ZIP a folder containing files of about 250 MB. How do I go about this in Windows 7 Home Premium? Also where is the "Compressed (zipped) Folder" (in the "send to" drop down menu) located? Thank you

A:How do I 'ZIP' a large folder in Windows 7

Launch Windows Explorer. Select all the files/folder you want to compress (you can also use CTRL+click to add more files). Right-Click > Send To > Compressed Folder. The ZIP will be located in the folder you are workin in. There is a tutorial if you need more info : Zip a File or Folder - How To

Here are screenshots of how it's done with the built-in zip feature :



If you want more features though, I recommend 7-Zip. It's lightweight, has a LOT of options, usually has better compression on ZIP (or you can use the 7z format which compresses even more), and is open-source : 7-Zip. It will add a context menu accessible via Right-Click in Explorer.

Here are screenshots of the same process with 7-zip :

2 more replies
Answer Match 39.06%

Hi, I'm new here. Since a week ago, my computer using large amount of RAM for some Windows processes like explorer.exe and winlogon.exe. When I start the computer, it is working fine, but then after 1 to 2 hours, it use more RAM even if I dont do anything.

Here is the list of the most notable processes
-explorer.exe = 50.000 K to 150.000 K
-wisptis.exe = 20.000 K to 40.000 K (there are two processes, I suspect one of them is a virus)
-winlogon.exe = 40.000 K to 150.000 K

Is it normal or it is definitely a virus? How to reduce these RAM usage?

A:Windows processes using large RAM

Quote:




I suspect one of them is a virus




You are probably correct in assuming there is a virus, as these 3 processes are a part of the Windows OS (Wisptis.exe is a system process which comes included with Microsoft Office Suite driver for Wacom Tablet, Windows ink services and tends to run alongside Adobe Acrobat Reader) Winlogon is the logon service where you logon to Windows with your user name and password.
You can also run Process Explorer to get a better handle on what is doing this.
Due to forum rules, we cannot assist with malware removal here. Please click on the link in my signature for Virus/Malware Help and post in that section of the forum for more help.

1 more replies
Answer Match 38.64%

I have Windows 7 64bit. After installing the latest updates from Windows update, all my icons on my desktop are HUGE. The ones on the start menu are normal and all text is normal. The resolution is set at 1600x900 (highest) and the display setting is on smallest (100%). How do I fix this?
 

A:Large icons after windows update

How To Resize Desktop Icons In Windows 7
 

1 more replies
Answer Match 38.64%

Hi everyone,

Im new here and just stumbled on this site, and Im glad I did.

I had a virus, and am pretty sure it is gone. I have done alot of scanning with malwarebytes, nod32, etc. all in safe mode. And I think it is all gone.

Anyways I did a PC recovery (F10 while pc is starting up) and when I do this of course it wipes out all the windows updates that have been loaded up over the years. So there are 99 updates to reload up. When I load them all up at once I have no internet access and I get messages that pop up on restart as in blah blah blah C:/windows/microsoft.net/framework/v2.050727/mscorwks.dll could not be loaded. Also C:/ programfiles/disc/discover.exe cant be loaded either. Before I load all the updates, the pc works fine.

Any solutions out there? Am I just loading too many updates at once on the pc?

My pc is compaq with amd athalon 64 processor 3500+ 991 MHz with 2GB RAM

Thanks in advance for the help

A:No internet after large windows update

Try System Restore to a point prior to all the updates.

Running SP3 standalone will decrease the number of updates you will need.

10 more replies
Answer Match 38.64%

Hi All

I have a little problem, i have two hard drives in my pc, master being a 250 gb drive, slave being a 300 gb drive.since i went to a dodgy site and got a virrus and had to do a repair on windows xp, then i noticed i didnt have large drive support and i reloaded service pack 2

The problem now is, my computer seas my hardrives as two partitions per drive and the real problem is that i had 200 gb of data on the 300 gb drive

is there anything i can do to get the 300 gb drive back to one partition and have all my data back

i am a little worried that someone might have clicked format drive when i said "this drive is not formatted do you want to format now", but not sure if this has been done
Please help!
Thankyou

Tall Pall
 

A:Large Disc Support Windows XP

8 more replies
Answer Match 38.64%

Last night, just before bed time, my wife informed me that she had seen, earlier in the day, a message indicating low disk space on our Windows 7 (Home Premium) Laptop. I took a look at the properties on C drive and it was down to about a half GB free space. This was on an 80 GB partition on which Windows is located. I ran Disk Cleanup and there is still only a bit less than 3 GB free space. I took a quick look at the properties of each folder at the root of C drive and found that the C:\Windows folder occupied about 48 GB. Isn't this way too much? Could this be related to Windows 10 to which we never upgraded? I'll look a little further this weekend to see if I can locate the bulk of the files, but I'm guessing I'm going to have to remove some Windows Updates or something, and if so, I'll likely need a little coaching on that.

More replies
Answer Match 38.64%

I know this is supposed to be a Windows 7 forum, but my problem is on a Windows XP machine. A lot of you experts learned your stuff on XP so probably have a good idea what the problem might be.

I have an HP XW4100 computer that I use to store backups. It doesn't have to be fast, and XP has worked well on that machine.

It has IDE and SATA ports on the motherboard, and I have added 2 x 4TB Seagate HDs connected to the on-board SATA ports. Using Seagate DiscWizard, I am able to split those drives into a 2tb and 1.6tb drive each so XP can partition and format them with MBR. So far so good.

Wanted to add some more 4TB drives, but there's no more SATA ports on the motherboard. Bought a Vantec PCI SATA card which uses the SiL 3114 chip and has 4 internal SATA ports. Installed the drivers, and when pluggin in an older 500g WD SATA drive, the OS sees it, I can partition it and use the drive.

When I plug a Seagate 4TB drive into that controller (even one that works with the MB SATA port), I can see the drive in device manager, Seagate DiscWizard can see the drive and partition it, but the drive will not show up in Disc Management so I can't use it.

I would conclude from this that the SiL 3114 chip has issues with large hard drives, while the Chipset on my HP has no problems. Strange though that the drive shows up in Device Manager and DiscWizard. Seems like a driver issue, but I've tried all the SiL drivers, and as I say, a smaller older SATA drive works fine.
I also tried using t... Read more

A:Large (4tb) drive not seen by Windows, smaller ones ok

Have you tried partitioning your HD so that your partitions are < 2tb?

From my understanding XP doesn't support > 2tb drives.

2 more replies
Answer Match 38.64%

Trololololololol

Fanboi's unite!

I have to now install a 3rd party app to have A START MENU... WTF?

If it ain't broke, don't fix it.

I'm out.

A:Windows 8 is an extraordinarily large piece of poo

Hi there
As a new member you are showing an awful lot of arrogance here -- in any case all programs are really applications so there's nothing wrong in calling a program an application -- can't see what the problem is.

You also mention Windows 8 which is now obsolete and has been replaced by Windows 8.1 which is a lot better and if you don't like the metro desktop you NEVER have to see it.

Apart from missing the standard start menu - which you can easily replace either by a 3rd party (usually free) application or custom toolbars or both you can make it look and behave identically to W7 which certainly was regarded as a good OS.

Now if you were referring to the ways Ms is choosing to implement updates etc (via the store rather than full ISO's) then your post might havce some merit - otherwise it simply adds totally NOTHING and doesn't enhance your reputation ONE IOTA. If you REALLY hate W8 so much just disappear and let others get on sensibly on this Forum.

Cheers
jimbo

15 more replies
Answer Match 38.64%

Looking at the properties of my C:/Users/Pauline folder, it shows a size of 198Gb, yet opening the folder and viewing the size of each file and sub-folder, they add up to no more than 2Gb (I keep all the libraries and user data files on a separate drive).
Another user, myself, as C:\Users\Malcolm shows a size of 9Gb. Even this is much much larger than the sum of the sub folders, but I could live with that.
Going to folder options and showing hidden and protected files shows nothing in the way of very large files.
Any ideas welcome, as my C: drive is almost full and I don'y know why!!
 

A:Windows 7 C:/User folder large

Your best bet would be to download an application like SpaceSniffer which would give you a graphical view of where the consumed space is going.

It's real easy to use. Just open the zipfile you download, drag the application to your desktop, and launch it.

I see your specs as Windows 7. You may want to right-click on the application and select 'Run as Administrator' which might give you a better view into folders that might otherwise be restricted.
 

3 more replies
Answer Match 38.64%

This morning, Aug 21 sunday, windows 10 did a very large update.  Now after my laptop has been on for 20 minutes, or so......the screen just goes blank (or very dark blue).  Nothing brings it back.  I have to do a hard shutdown....hold in the power button until it goes off, and then start it back up. Was there something in this update that has caused the problem??  It ran fine before the update. thanks......Pete

More replies
Answer Match 38.64%

hi,

I'm having some troubles with windows that are too large to choose the right button.
I've been searching over the internet and I have read things about dpi, but that's 100% in my case and so no problem. I've updated my nvidia graphic's card. I've tried to use a windows 7 fixing tool, no good result.

I'm using an external LED screen with a resolution of 1920x1080. I don't know why it suddenly had this problem... but even without this external screen, the problem shows up

I've included a screenshot of my gta 4 installing wizard (and it's not just with this installing wizard, but also java, adobe pdf...)... Hopefully the image tells you more than what I've been explaining...

thanks anyways for all your replies,

greetz,

kingleon

More replies
Answer Match 38.64%

Hi guys,

My C drive is getting full and I have 5GB of files in the C:\Windows\Installer folder. I google'd around and found numerous articles/posts about running a command "msizap.exe G!" to properly clear out un-needed files.

Everything I've found on properly deleting files from this directory points back to a download that used to be here:
http://support.microsoft.com/kb/290301

which now has a note: "This article previously contained a link to the Windows Installer Cleanup utility (MSICUU2.exe). If you were directed to this article to solve a problem installing a product other than Microsoft Office, please contact your software manufacturer for installation support on the product."

(thanks Microsoft... do I contact YOU then??)
Does anyone know the current correct procedure to clear out this folder? Or if this tool is still available somewhere? (and safe to use on Windows 7)

Thanks
 

A:Large C:\Windows\Installer folder

7 more replies
Answer Match 38.64%

I have a video file that is 5+GB. Windows is telling me it can't move it because it is too large, even though there is ample space in the directory I'm moving it too ...

Any ideas as to how to solve this? Thanks.
~~~

A:Moving Very Large Files in Windows 7 x64

Can you post a screenshot of the error and your "My Computer" window showing the hard drives you're moving from/to?

7 more replies
Answer Match 38.64%

Hi everyone, I was up until 5 am last night banging my head against the wall so I really hope someone can help!!

My PC was experiencing quite a few problems with a year old XP installation so I decided to do a reinstall 2 days ago. I have 2 drives, 80gb(boot) and 250GB (data) (both SATA), I backed up all my important stuff to the data drive, booted my XP disc, wiped the boot drive and away I went. The XP disc is an old, but proper one, that didn't have either service pack on.

I ran through all the reinstall bits and bobs, had a small problem with corrupting downloads that turned out to be Nvidia firewall, got everything patched and all ok but the data drive appears corrupted, it appears in 'my computer' but clicking on it gives me "F:| s not accessable, The file or directory os corrupted and unreadable".

Disc management in admin tools shows up a drive, as healthy, with a size of 232.88 GB, and as active.

I wondered if it was to do with the 48bit LBA addressing or anything else? It was so late last night I wasn't able to fix things and after running into a few things on the web, I physically unplugged the data drive and did the whole windows installation all over again but to absolutely no joy.

Has anyone else had a similar problem? Is there anything I can do? I need the data on this drive more than the PC itself!!

Thanks very very much for anything you can give - you lot have proved very very knowledgable in the past!!

Cheers again

A:Windows XP Resinstall and Large HD Disaster :(

Hi,

Welcome To TSF.

Sorry about the bad start but hopfully things will pick up.

First - If you have an Anti Virus Program run it (just on the Data drive) If you dont click here to use an Free Online Scanner
If that scanner does not work click here for another one.

Second - Install and run Ad-Aware and its plugin VX2 Add-on Cleaner.

Third - Install And Run Microsoft Windows Defender.


All That are maked RED are link for the downloads or the pages.

If they are any problems or any thing comes up on them 3 just messege back here.

Hope it all goes okay.

Have A Nice Day,

Jay.

Third -

19 more replies
Answer Match 38.64%

I am a tech and have done over 30 clean installs and cant figure out what the heck is going on with large as in 1gig or more file transfers hanging up. All clean installs with tests done immediately after activation and updates. This is a MS problem. I have tried all the various fixes and find that the C drive seems to handle network files best. In multidrive situations turning off the Remote Differential Compression also seems to help. Please get a hot fix as this is on multiple machines and very easy to duplicate. I would say it would be a rare install not to lock from a C drive to a D drive when file sizes are more then 2 gigs. You guys are running out of time. I am a consultant and I'm ready to get sick over a great operating system that's worthless for large video files.

A:Large Files are locking up Windows 7 32 bit and 64 bit

Did you try this one
 
Apparently you need to tell Windows that you want to use the machine as a file server and that it should allocate resources accordingly.  Set the following registry key to ‘1′:
HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\LargeSystemCache
and set the following registry key to ‘3′:
HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size
After making these changes and restarting, I haven’t seen this issue arise again

 
http://alan.lamielle.net/2009/09/03/windows-7-nonpaged-pool-srv-error-2017

10 more replies
Answer Match 38.64%

am using windows 98. want to change montior to flat screen. tried a NEC but was told by NEC my 98 couldn't support 1024 x ?, so got a KOGI that had been hooked to an old 95. screen is fuzzy and windows are so large i can't reach the apply or ok buttons. in display there is a minus (-) in front of display adapters; the subtitle is NVIDIA Aladdin TNT2 and a minus (-) in front of monitors with the subtitle of GVISIONL5QX-TIA. Should the display adapters and monitors subtitles be the same? I think the NEC was NVIDIA and I think the KOGI is the GVISION. Any suggestions of Annie?
 

A:fuzzy screen and too large windows

good news!! don't need help with "too large windows" portion of my problem. I finally got that part solved. the windows are normal size and i can now reach the apply and the ok buttons. time to celebrate!! still need help with the fuzzy screen...annie yahe, yahoo!
 

1 more replies
Answer Match 38.64%

Strange thing - every time I work with a somewhat big file - like 20-50Megs (convert mp3 to a WAV and save it or work on large graphic file) system just locks up. No response even to Ctrl+Alt+Del.
AMD K6 1000MHz, 512 RAM, 20GIG, WIN 98SE.
Did scandisc, defrag ... no change. What could it be?
 

A:Windows 98 large file lock-ups

6 more replies
Answer Match 38.64%

We lost electricity this morning and when my computer came back up all the windows were huge. I went to control panel>display>settings and changed my DPI. This made the windows smaller but the text is still large -- doesn't fit in the text boxes. I went to control panel>display>appearance>advanced and the font there is greyed out and won't let me select it. Any ideas of how to make the text fit in the boxes?

A:large text that doesn't fit into windows

Have you tried rebooting?

Sometimes weird problems resolve themselves after you completely shut down and restart

5 more replies
Answer Match 38.64%

Hello,
I have just upgraded to a 15" lcd monitor. I have windows xp.
I have several instances where ...when I call up a program...
the window does not include the entire program...
Some of the program is off screen...I have tried tochange resolution...
and it still loads the program too big...i.e. if I had to click ok...it is not on the screen...
This problem occurs with several programs...it is a problem of resolution? or is there
a menu I can change....
Thank you.
dpatterson23
 

A:Program windows too large on screen

6 more replies
Answer Match 38.64%

Using Thunderbird 1.5.0.5, when i try to add a "New Card" for
a new email address, the pop-up window's bottom inch doesn't
display on my screen. I try to "drag" this window upward, but it
won't drag at all. Any advice on how to fix this balky window?

Thanks!
 

More replies
Answer Match 38.64%

Hi there

We have this machine running on Windows 8.1 that have an issue with spacing due to the Windows.edb can grow
up to 30 GB space. 

We know how to fix it temporarily by shutting down the Wsearch service and delete that windows.edb file. We've
noticed that this symptoms happened when the machine is offsite. This machine has a File History backup that backing into NAS at office.

We also had a look on the following KB - https://support.microsoft.com/en-au/kb/2838018 and
nothing specifically about Windows 8.1 and we did apply the KB 2836988 and applied and it didn't work due to Windows 8.1 NOT 8.0 RT.

I'm appreciated your feedback.

Thanks

Our networks: Dewalist.com - community classifieds, Dewamart.com - Online Gears, Dewaster.com - tech & creative social media, Dewacorp.com - Managed IT Services, Business Intelligence, Software Development & Creative

More replies
Answer Match 38.64%

Hi there

We have this machine running on Windows 8.1 that have an issue with spacing due to the Windows.edb can grow up to 30 GB space.

We know how to fix it temporarily by shutting down the Wsearch service and delete that windows.edb file. We've noticed that this symptoms happened when the machine is offsite. This machine has a File History backup that backing into NAS at office.

We also had a look on the following KB - https://support.microsoft.com/en-au/kb/2838018 and nothing specifically about Windows 8.1 and we did apply the KB 2836988 and applied and it didn't work due to Windows 8.1 NOT 8.0 RT.

I'm appreciated your feedback.

Thanks

More replies
Answer Match 38.64%

Hi there

We have this machine running on Windows 8.1 that have an issue with spacing due to the Windows.edb can grow
up to 30 GB space. 

We know how to fix it temporarily by shutting down the Wsearch service and delete that windows.edb file BUT
we need a permanent solution. We've noticed that this symptoms happened when the machine is offsite. This machine has a File History backup that backing into NAS at office.

We also had a look on the following KB - https://support.microsoft.com/en-au/kb/2838018 and
nothing specifically about Windows 8.1 and we did apply the KB 2836988 and applied and it didn't work due to Windows 8.1 NOT 8.0 RT.

I'm appreciated your feedback.

Thanks

Isadewa

More replies
Answer Match 38.22%

I want to print 'something'
Annoyingly, it will have a LARGE black area - or maybe a large area of something else - another colour

I print: I waste ink, lots of it - bad for the world, costly and expensive wasting that ink, if on an inkjet - also rubs off on you!!

Is there a printing program that examines large areas, if they are of a similar colour, substitutes it for a zigzag pattern of the same colour?

See below for a rough sketch of what I mean:

I did a quick search on google, couldn't find anything - but then again, I wasnt sure 'what' to search for!

Thanks
OM
 

A:How do I NOT print large black areas (or other large colour areas)?

16 more replies
Answer Match 38.22%

Hi all, thanks in advance for reading! I've been experiencing these issues since I began my foray into Windows 7 over a week ago. Before I describe the issues, here's my system's stats:

Asus P5N-D
2x2gb Corsair xms2 DDR2 800 @ stock
C2D E8400 @ stock
nvidia geforce 8800 gts
1 x WD Raptor 37gb sata
1 x WD Caviar 250gb sata
2 x Samsung Spinpoint F1 750gb sata

During large file operations (moving, copying/pasting etc) between HDD's of items (single files or groups of files and folders, and from the Caviar to either Samsung) exceeding several gb's worth, the system would hard lock - no mouse/keyboard, all visual progress halted, no visual HDD activity. If left alone, the system would very intermittently flash a black display and return to the frozen desktop display, eventually winking out to a total lack of display output altogether.

Upon soft reboot, the destination HDD has been dropped from BIOS, boot menu, etc. Boot hangs at midpoint during the splash.

Hard power-cycling yields the HDD reappearing and Windows starts without issues.

What I've done so far:
-Disconnected destination HDD and tried the other spinpoint, same result.
-Diag'd all HDD's with manufacturers' tools, all pass.
-Flashed BIOS to most recent update, no change.
-Swapped out the WD Raptor for a freshly unboxed WD 640gb Caviar Black. Clean installed W7 x64 after format etc and did NOTHING (this means installed no drivers, no programs, nada) but attempt the file operations after first startup post-install. S... Read more

A:Windows 7 RC1 x64 crashes during large file operations

I forgot to mention the md5 hash checks out on the iso image from MSDN, I made sure of this after getting a bum image the first time around.

1 more replies
Answer Match 38.22%

Hi all,

I have a really big issue with one of my computer when copying large file (about more than 1GB).

When I copy a large file, 10GB for instance, after the time calcution for copy, the copy begins but the progress bar never goes after 1%. Even if I let the copy working all the night, the status stays the same. I have this issue if I copy a file from a folder to another one or if I copy it from my computer to an external hard drive (both NTFS).

I have another computer with Windows 7 Enterprise which does not have this kind of problem.

Could you help me on this issue?

Thank you very much

A:Windows 7 freezes when copying large file

Hello, Welcome to SF!

Try this thread: Windows 7 Hanging when copying large files

~Jonathan

4 more replies
Answer Match 38.22%

Hey.

So, several months ago, I encountered an odd issue. My windows were far larger than they typically were. I remember trying to fix it with no luck. I eventually adjusted to the new display issue, and moved on. However, today I needed to work on a rather important project, and found the window was too large to work with. It extended off the screen. In addition, I am unable to resize it. I've tried every resolution available to me, with no luck. I performed multiple system restores back when I first had the problem, and I don't have any viruses.

I would greatly appreciate it if someone could offer some insight. I finally decided it was worth asking about. Thanks!

Tyler
 

A:Solved: Windows Display Improperly, Mainly Too Large

7 more replies
Answer Match 38.22%

I recently replaced a 14" LCD monitor with a 17" LCD monitor. This has the result of scaling up the size of all windows by what I assume to be 17/14ths.

But what I want is to have the windows be the same size (in INCHES, not pixels) as on the smaller monitor, with every letter in whatever font being the same size (in INCHES, not pixels) as on the old monitor.

This would be a great advantage, as then I could actually make use of the larger real estate and have more windows open. It may not be possible - I've tried all the display and system font settings. But if anyone has a suggestion I'd appreciate it.

Running XP SP2 with all patches installed. I have the monitor resolution set to 1024 x 768.

A:[SOLVED] have large monitor - want smaller windows

Window sizes are measured in pixels (not inches). LCD size aside, screen size is determined by the resolution of the monitor. If you were using 1024x768 on the old monitor and are still using 1024x768 on the new monitor, then your screen size is still the same (it only appears larger because you are displaying it on a larger screen). LCP panels should be run at their native resolution. Look up the specs of your monitor to find the native resolution.

5 more replies
Answer Match 38.22%

Since purchasing the surface rt, I had a whole host of problems but this one I havent figured out how to go around

Apps in the appstore over a certain size, say 40 mb refuse to download.... It would start then go on pending if i were to exit the store or if the screen were to lock and sometimes just on its own. The worst thing though is that if i cancel the download... the space that the app wouldve taken up if it were installed is what is missing from my drive.
Where thereafter I would have to delete the SoftwareDistribution folder every time this occurs to retrieve the space.

Ive tried so many fixes and nothing works. Ive restored and reset this pc so many times. Sometimes Im even caught in an automatic repair bootloop, but i doubt thats connected.

A:Windows Store pending on large downloads:

/bump

Anyone out there?

3 more replies
Answer Match 38.22%

I recorded a couple of three hour television shows using Windows Media Center. I would like to burn them to DVD but they are too large.

Does anyone know where these files are located and the format they are in? I am assuming that I need to convert them to something else so that I can split and burn them, but cannot figure out where the files are.

Thanks -

george

A:Windows Media Center File Too Large

AFAIK the default location is:
C:\Users\Public\Recorded TV

also shown as: C:\Users\Public\Public Recorded TV
on my system

2 more replies
Answer Match 38.22%

I'm currently getting what it seems like windows explorer ( or the status box when copying ) hangs when i try to copy files over 1gb ( i copy like 5 or more 350Mb files and its rock stable and fast - upto 50Mb/S over a 1 GIG ethernet link )

I notice after its copied around 750 the status box freezes and it seems its not coping any more... its via 1 gb network link , both machines are fairly quick and i'm logged into the machine i am copying from using terminal services

specs of 2 pcs -

pc where files are copied from - Quad 2.4 , 4Gb Ram , 2.4Tb in Raid 5 , Win7 X 64

pc where the files are copied to - dual core 2.26 , 4Gb Ram , 500Gb WD Hdd , Win7 X64

I beleive its not hardware as i've copied like over 10 gigs of 350 mb files with out issue , only multiple single files > 1gb seem to have issues.

Both PCS are running RTM. 16385

Delphian

A:Windows 7 Hanging when copying large files

As a suggestion, test what happens when you fully uninstall (disabling is not enough) your anti-virus utility and 3rd-party firewalls, if any.

The most likely cause is interference from a kernel-mode filter driver.

2 more replies
Answer Match 38.22%

Tried DRAG N DROP a large .avi file ( 670 MEG) from a CDRW into a folder on XP PRO. About 3/4 during transfer it stops and gives something about a MS DOS ERROR? Is it possible to copy this large file?
 

A:Moving Large File With Windows Explorer In Xp

I copy 5-6 gigabyte video files around with Explorer in 2K and XP.
 

1 more replies
Answer Match 38.22%

I recently had to replace the HD in a Dell Inspiron laptop running Windows XP Pro SP3. I rebuilt the HD installing Windows, FireFox, Malwarebytes, and other needed software programs. I tried to download the printer driver for an HP printer which was 70 MBs. After restarting the download a few times I was finally able to get all of it. The client would like the HP software package as well which is 500+ MBs. When I attempt to download this file, about 25 MBs download and then then it stalls and times out. I have tried on different days but had the same result. The laptop is connected to the internet using Charter Spectum with an ethernet cable to the modem. This is a very fast connection at about 60 mbps. The 500 MB download should complete in about 7-10 minutes. Smaller downloads are almost instantaneous. It seems to be specific to the large file downloads that take more time. I have tried resetting the TCP/IP protocol and running the WINSOCK fix. I have also tried disabling the firewall in VIPRE Internet Secuity but nothing I have tried has resolved the download issue. Would appreciate any and all suggestions. I have googled the problem but have not found a solution there either.
 

A:Trouble downloading large files with Windows XP PRO SP3

Easiest solution is to download the file on to a computer off site using a different service provider. Put the file on a USB stick and take it to the client.

I think the client needs to contact Charter about the difficulty downloading items from the internet.
1. Does Charter still support XP? That might be part of the problem.
2. Is there a limit on data downloaded? Comcast has caps in some areas. I'm not sure what happens when you approach or go over the limit because I am no where near any data allowance cap.
 

1 more replies
Answer Match 38.22%

Hi
I am new here, but I must already thank you for all the interesting info I have found here. I recently upgraded my computer and part of the plan was to use two 2Tb drives in a raid setup for my main windows drive. I see that it only recognises about half of the raid volume and the rest is unallocated space. Is this a general limit on Windows or is there a work around this?

A:loading windows 7 onto large RAID 0 disk

Have you tried to reformat the drive? or create another partion?

4 more replies
Answer Match 38.22%

You can read about it here and view its exhaustive list of updates.

http://betanews.com/2015/08/05/microsoft-update-for-windows-10/

https://support.microsoft.com/en-us/kb/3081424

-----------------------------------------------------------
 

A:Large Cumulative Update Released For Windows 10

11 more replies
Answer Match 38.22%

I have just received a running out of system disk memory notice on my Windows XP desktop computer. I was a bit surprised because I don't store much on the system disk, and as part of an exercise discussed on another thread here I had recently cleaned it up. I ran a scan with AVG free which came up with nothing and also Spybot S&D which cleaned out as many temp files as it could. After this I noticed one very large "hidden" folder remaining in the temp folder. It was called ~eu0000. In it was a single file called .eunf.
 
I have a dual boot so I could probably quite easily delete the folder and file, but before doing so I am curious as to whether it might have been caused by malware.
 

The composite image above shows the location of files on my very full system drive, as well as the results of the AVG scan.
 

 
This image shows the Windows temp folder (after the S&D cleanup) containing the offending large folder.
 
I should appreciate any thoughts anyone has on this.

A:Very large file in Windows\Temp folder

In it was a single file called .eunf
 

Is it eunf or just unf?

7 more replies
Answer Match 38.22%

Running:
P4 - 2.4 GHz
82801DB Mother Board
845GRC Chipset
2 GB Ram
Bios: RG84510A.86A.0033.P17

I recently tried to install Windows XP on a new Ultra ATA Seagate Barracuda 7200.8 250 GB Hard Drive and forgot about the problem with large hard drives issue (which I am educated very little about). The installation process progressed as usual in terms of formatting drive, copy files to install, etc, but upon reboot the hard drive would not boot to the Windows GUI to install windows. I thought it was a disk issue such as a scratch or something, but the install disk worked fine installing onto a 10 GB Western Digital IDE hard drive. So I guess the problem is related to the size of the hard drive and/or the Ultra
ATA issue. My bios does recognize the hard drive.

I have an Intel 845GRC Chipset. Intel's website says:

"Does the Desktop Board D845GRG support Ultra ATA/100 hard drives?
Yes. The Desktop Board D845GRG supports Ultra ATA transfer rates up to 100 MB/sec (ATA/100) by way of the ICH4 IDE controller with two independent bus-mastering IDE interfaces. An Ultra ATA/100 supported hard drive and an 80 conductor IDE cable are required to take advantage of the increased bandwidth available on the IDE channel. One of the new features of the Intel Desktop Board D845GRG is its ability to support larger ATA/100 capable hard drives with 48-bit Logical Block Addressing (LBA) within the BIOS along with all Ultra ATA transfer rates (i.e., 33 MB/sec, 66 MB/sec and 100 MB/sec). To... Read more

A:Help Understanding Large ATA HD & Windows Install on New Drive

8 more replies
Answer Match 38.22%

Hi I want to make a switch from Android to Windows phone. Most of my questions are already answered by Google but one question i can't find an answer for is: Are there extra large tiles on Windows Mobile (like the contacts live tile on Windows 10 for pc/laptop)? Regards Stanislav from the Netherlands.

More replies
Answer Match 38.22%

Hello there!
I've had this HP laptop running Win XP Pro-SP3 for almost two years. Since the very beginning, I've had this ongoing problem with websites causing IE to crash when accessed. I would say that this problem occurs with about 15 - 20 percent of sites. Examples of problem sites include:
http://www.cbs.com/daytime
http://www.ustream.tv
and many, many more. Does anyone have some idea as to what might be causing this and how to correct it?

Thanks,

Jordan.

More replies
Answer Match 38.22%

I've been using the RTM version of Windows 7 Enterprise through my companies gold partnership msdn program. So far I'm really impressed, a great improvement on VISTA.

However a problem I used to get with VISTA, which was solveable, now haunts windows 7. That is Vista used to spend a lot of time trying to preview AVI files, stoping you from renaming, moving or deleting them. The fix I had with vista:-

ECHO Un-Registering shmedia.dll...
REM Remove Media (e.g. AVI) preview, type and hit enter
regsvr32 /u %windir%\system32\shmedia.dll

However this doesn't work with Windows 7. I don't want to disable all previews, just the video files, mainly AVI. Any ideas?

Also on the new Windows 7 toolbar, I don't like how much extra space the notification icons take up (e.g. the ones near the clock), there all really spaced out. Anyway this can be changed? On vista and XP if I have a double height taskbar, you get three rows of notification icons. Now you just get two, even with the new larger windows 7 taskbar. I've hidden just about as many as I can, but still takes up 1/3 of my task bar.

A:Windows 7 Problem moving / deleting large AVI's

I don't have a solution for your problem, but I'd just like to remark Windows 7 has quite a few glitches when it comes to video and multimedia. Among the other ones I've noticed, thumbnails previews are EXTREMELY inconsistent. Some work, some don't. That is with videos playable by WMP. And even with the same codec, some work some don't. Also there's still things to be ironed out with MOV files support.

1 more replies
Answer Match 38.22%

I'm trying to copy a DVD catalogue with over 30,000 product images onto a USB backup drive. Windows 7 Explorer cannot seem to do this. It copied some of the files but then just stopped copying.

I rebooted my machine and tried to copy the files again but Windows reports that it's going to take almost 4 hours to copy! I suspect, however, that it will fail again to complete the task. The backup device has a data transfer rate of 450Mbps so it really shouldn't take that long, surely?

Is there other software I should use that's better than Windows Explorer? Or some other method to accomplish what I would have expected to be a simple task?

A:Windows 7 cannot copy DVD with large number of images

  
Quote: Originally Posted by dunderhead


I'm trying to copy a DVD catalogue with over 30,000 product images onto a USB backup drive. Windows 7 Explorer cannot seem to do this. It copied some of the files but then just stopped copying.

I rebooted my machine and tried to copy the files again but Windows reports that it's going to take almost 4 hours to copy! I suspect, however, that it will fail again to complete the task. The backup device has a data transfer rate of 450Mbps so it really shouldn't take that long, surely?

Is there other software I should use that's better than Windows Explorer? Or some other method to accomplish what I would have expected to be a simple task?



Hi there
It's a "Roundabout" way but this should work and be quite fast.

If you have a decent backup program (NOT WINDOWS STANDARD BACKUP) that is capable of copying DATA as well as just "Imaging" a disk / partition then this method will work quickly and easily.

I'm using ACRONIS but any decent commercial backup program will work similarly.

1) Backup the data to a spare area on any disk. The file will be called something like xxxx.tib in the case of acronis.

2) Now Restore the data to your USB device.

Job done --easily and very quickly normally.

Cheers
jimbo

9 more replies
Answer Match 38.22%

Hey guys, as you can see on pic, my start menu on Win7 became so large and IDK why because my young brother was doing something. I didn't noticed anything. But you see. It's large and annoying. How can I fix it? BTW : It's large only on left and right side. When I put menu down or up, it's normal. Thanks for answer!

A:[SOLVED] Windows 7 Start menu is so large :|

Right click on the superbar and unlock the bar. You can then resize it by hovering your mouse at the edge, similar to how you would resize a webpage.

3 more replies
Answer Match 38.22%

Having Windows 7 Crash overnight when downloading large files or using Torrent. Attached is the .dmp file.

A:Windows 7 Crash Downloading Large Files

The dump file gave the error below and pointed to utorrent as you suspected.






Quote:
STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL

Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility

BSOD Index



Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 0, fffff80002e18477}

Unable to load image \SystemRoot\system32\DRIVERS\NETw5s64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NETw5s64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETw5s64.sys
Probably caused by : NETw5s64.sys ( NETw5s64+b76b )

Followup: MachineOwner

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_E... Read more

2 more replies
Answer Match 38.22%

User running Windows 7, with Outlook 2007, 20 GB PST.
User has two email account, 1 may be an IMAP, 1 may be POP, or both can be POP (I'll check if necessary)
No Exchange accounts.

Outlook wouldn't start, so I used SCANPST to repair (took hours, of course). Outlook ran slowly, but now is getting stuck again.

Ran Windows 7 Error-checking, with "Scan For and attempt recovery of bad sectors".

My thought was to:
Restart with startup items turned off.
Upgrade to Office 2013
See if Outlook will open the PST
Run SCANPST again

Does SCANPST compact the PST ?
Should I compact after running SCANPST ?

If I get Outlook Running, should I move old messages to separate PST files, a year at a time?

Any 3rd party repair tools that I can use?


Thanks.

A:How to Repair Large Outlook 2007 PST on Windows 7

Hi and welcome to SevenForums,
This is a good site with numerous tools,
How to repair a damaged Outlook Personal Folders file (pst) - Slipstick Systems
Convert an Offline File (.ost) to a Personal File (.pst) - Slipstick Systems

1 more replies
Answer Match 38.22%

i currently have windows 7 installed on a 80 gig sata drive.

i also have 2 x 1.5TB drives and 1 x 3 TB drives set up as one large dynamic disk (they are combined and show up in windows explorer as D:\ with 5.45TB)

how do i go about re-installing windows on the 80 gb drive (or possibly a new SSD drive) without losing any data?

before anyone suggests backing up, re-install, then transfer the data back over, is there a way to do it without doing that, since i wont be able to back up that much data externally

thanks

A:New installation of Windows 7 with large dynamic disk

Backup any data on the 80GB drive, do a Clean Install with you Win 7 DVD then restore your data to the 80GB drive.

You should be able to backup 80GB to the 5.45TB dynamic drive.

To be safe, I would disconnect the other drives while doing this then reconnect them once the reinstall is complete.

Or is there more to this than it appears from your post?

If you are moving to a SSD then you should be able to clone the 80GB SATA to the SSD. Again, you disconnect the other drives, connect the SSSD to SATA port 0, the 80GB to another port then clone it using Acronis if it's an Intel drive as they offer it for free on theri website.

9 more replies
Answer Match 38.22%

I have been having these problems for months now.

Heres what happens:

When I load the computer up, 90% of the time it loads as windows classic mode. This means sound, network, and that weird classic-safe-mode theme is on. No safe mode tags at the top either. Upon opening process explorer the cpu usage is constant at 50% on SYSTEM. Many, many, MANY reboots MAY fix it, but as soon as the system goes down, boom. Desktop.ini was copied to my startup folder and around. And hibernation doesnt work anymore. Virus? Maybe. The last time it was a currupted tscd_win32.exe, I deleted & disabled but two weeks later something else got currupted. I tried system restore. I do NOT want to reinstall.

Thanks a lot, any solutions would be appriciated.
 

More replies
Answer Match 38.22%

I am Getting a problem ... not actualy a problem but this thing bugs me... i have intel p965lt board... having #520 processor 2.8ht ... i got 2 gb ram ... with a 6600 Graphic card

first i got seagate 80gb sata harddrive... i installed windows xp sp2 on it ... it takes almost 10 sec's at max to show its startup logo window.... but now few days back i have added 320gb westrendigital HDD ... and my startup time is now about 120++ sec's ... i have reinstalled the windows on 80gb harddrive but still the same problem .... i have installed 320gb harddrive just for my backups / games / works / movies etc... not for OS ...

i have a question that why my system is taking so much time at startup... is this a problem with my additional Hrddrive... or i have to check some thing else

Thanks
Sarmad Mahmood
 

More replies
Answer Match 37.8%

Hello all,

Installed a new motherboard and everything went well with that untill I start updating windows. Windows downlaods all the updates then does a restart and on the restart I get the blue screen of death. Please help. Many Thanks in advance.

A:Fresh Install - Large Windows Update Crash

Hello powerade,

► This is one, VIRTU LucidInterop WDDM Driver by LucidLogix

Code:
fffff880`04a12090 fffff880`03fd6900Unable to load image \SystemRoot\system32\DRIVERS\VirtuWDDM.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for VirtuWDDM.sys
*** ERROR: Module load completed but symbols could not be loaded for VirtuWDDM.sys
VirtuWDDM+0xe900
Try to upload the driver from lucidlogix with GPU Solution.

► Intel HD Graphics Driver

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa7fffffffe0, 2, 1, fffff8000316c99c}

Unable to load image \SystemRoot\system32\DRIVERS\igdkmd64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
Probably caused by : igdkmd64.sys ( igdkmd64+a376f )

Followup: MachineOwner
Update it from http://downloadcenter.intel.com/Default.aspx.

Do the changes and let us know.

3 more replies
Answer Match 37.8%

Hi I recently upgraded to Windows 8.1 and some folders I have when I click for the Large thumbnail preview (Ctrl+Shift+2) The folder icon look like if was upside down, maybe this is the way it's intended, I don't know :b.
I'll leave some screenshot so you guys can see what I mean.

This one is the weird upside down looking icons
This one is normal list view

What could it be and how can I fix it?

A:Windows 8.1 Large thumbnail preview Icon upside down?!

Dude,

Good One..

A Really Good One!!

6 more replies
Answer Match 37.8%

Hi,

I'm not sure what I've done but all of the text in the menu items is all appearing very large. I presume I've done this using a short cut some how. I've attempted all of the obvious solutions in display settings to no avail. Below is an example of how the menu looks in Excel.

I'm sure it's a simple one but any help appreciated.

Andrew.

A:Can't reduce large text/menu size in windows 8.1

Hi Andrew,
Welcome to W8F!

You check this?:

1 more replies
Answer Match 37.8%

Hello,
I hope someone can help me. I have 2 internal-sata hard drives(320 gig. And 2tb.) and 1 external usb/2.0 hard drive (750 gig.). The pc is an old dell gx520 tower with a fresh install of win7 pro. No antivirus, network connection, or firewall enabled. Processor is a Pentium4 running 3 GHz with 1.5 gigs of ram.

This is the problem: If I do a search on the 2tb. Drive for all of the jpegs, I have a total of about 84000 pictures. When I select all of the pictures and right click-copy and try to paste to another hard drive the pc will lock up and won’t display a copy status window. Windows says it’s not responding.
Now, if I right click-copy a single folder which has anywhere, from a few files to several hundred gigs. of data in it, using the same 2tb. Drive, it will copy over to another drive just fine.


I have tried, changing the swap file from “windows managed” to, up to 20 gig. Thinking the search was maybe having to write to the swap file. This didn’t work. I also booted in to safe mode and tried to do the copy from the 2tb. To the 320gig. drive and still no difference. I have tried this with windows copy handler and teracopy. It all has something to do with the fact that I am doing a search for the files before copying them.

Thanks for you help.

A:windows freezes when copying large files AFTER a search.

I'm sure it was working, just gotta give it time. It may say it's not responding but that because it's not responding to you. It has to sort it out before copying.

1 more replies
Answer Match 37.8%

Hi,

For a while now my Windows folder has been taking up more space on my 60GB SSD than I think it should. The size breakdown goes like this:

C:/Windows - 28 GB

- winsxs - 11.65 GB
- System32 - 8.45 GB
- Assembly - 1.63 GB
- SysWOW64 - 1.30 GB
- Installer - 1.17 GB
- Microsoft.NET - 1.03 GB
- SoftwareDistribution - 0.85 GB

I do regular registry fixes and temp file cleans, and I do regular inspections on my drives to remove unnecessary files and programs. However, the large increase in my Windows folder which happened about 6 months ago is really bothering me.

Is there any way get rid of some excess files? Or is this just a case of Windows inaccurately showing the actual amount of free space due to hard links?

Help is appreciated, thanks

A:Abnormally large Windows folder, size reduction possible?

Have you run disk cleanup?

9 more replies
Answer Match 37.8%

Hi:
I set-up Windows Live Mail from a help of this site, to which I truly feel grateful.

Now, I find a size of Font is too large,.... about '14' to '16' that I want to correct to normal font sizse, '12.'

My question is;
How to change from '14' or '16' to normal font size,12?'

Thanks for your help in advance.

A:Font Size is too large on Windows Live Mail

Hi -

Go into Live Mail, click on blue tab, top-left; select "options", "mail".

This screen will then appear -



Regards. . .

jcgriff2

`

6 more replies
Answer Match 37.8%

Greetings!

I've been having trouble for several months now with my file folders getting too large. Normally, I can clean up my temporary folders with cCleaner or by using the Disc Cleanup tool. This usually takes care of the large "AppData" folder. The trouble I'm seeing now is that my "Installer" and "winsxs" folders continue to grow. Currently, Installer is at 14.4 Gb and winsxs is at 11.3 Gb.

I have read several posts here and a few internet articles discussing options like turning off hibernate mode, emptying the AppData folder, and running cCleaner. These don't address issues in Installer or winsxs though. I tried deleting applications that I don't use. There are some that I'm not sure that I use but may be part of some Excel or VBA pack that I need so I don't delete those. I also ran the msizap.exe application but can't seem to reduce the size of those folders.

I'm not sure if this helps but I ran SpaceSniffer to get an idea of where all my space was being used. In there, the application is telling me that some of these larger .msi or .msp files haven't been accessed in over a year while some of the smaller files haven't been accessed in over 4 years. I'm not sure if that matters but it seems like there could be some house keeping done on those files.

Any help anyone can give is greatly appreciated. Thanks, in advance, for any help you can give me.

Michael

A:Large Windows 7 Installer and winsxs Folders - 50% of partition

Those sizes are not especially large. On my Win 7 system, Winsxs is 12.5GB. Installer is small though, under a GB.

How big is your hard drive. If it's an SSD then it sounds like it's too small.

4 more replies
Answer Match 37.8%

Hi,

I have moved to Windows 7 Ultimate x64 for almost half a year, recently my hard drive was getting full and I decided to move some of the data to usb external hard drives. Both the externals I have are IDE hard drives and both are NTFS. I always use Quicksfv to make a CRC check file before I transfer the file and then run the CRC check after its been copied over to the external drive. I have used these externals in the past with Windows XP and had no problems.

However, on Windows 7 when transferring large files (usually over 1GB in size), I get corruption in the files. The corruption occurs randomly, if I recopy the files again it might be corruption free. This only occurs when copying files from internal to external, if I copy files from the external to my internal there's no corruption at all.
I have tried changing the usb cables, power cable of the externals, using different usb ports but none of it helped. I scanned both externals with chkdsk and I used memtest+ for over 24hours and all the tests passed fine.

Regards,
Pleco

A:Windows 7: Corruption in large file transfers to USB drives

are you using a usb2+ device on a usb1 port/cord?
Do you have relevant system(dsk) errors after the corruption?
Are you using windows explorer to copy/move the files to the externals? Or other program?

9 more replies
Answer Match 37.8%

Hi there
Workstation Version 10.2 Host running these distros - same observations for both hosts. Opensuse / Linux Mint 17 both 64 bit. Guest is windows 8.1 update 1.

I seem on the df -h command get a /tmp file around 4GB which is 95% allocated. This goes down to 0% when the vm is powered off.

I can't seem to find any way to increase the size of this file or configure it in any way -- is this just VMware using disk space or will my Guest eventually fail because lack of disk space. There's actually plenty of space on the HDD itself. !!

Cheers
jimbo

More replies
Answer Match 37.8%

I have an ultrabook with 128 GB of space, 101 GiB after partitioning and so on, so it got annoying when I just checked my C:\Windows directory and it was up to 25 GBs, with winsxs up to 14 GBs. I had heard on Windows Weekly that there was a way to clean up the winsxs directory now, so I followed that simple procedure and gained 3.5 GBs of disk space after the utility was done. I then rebooted and I gained 1.5 GBs more, 5 GBs of unnecessary files removed.

C:\Windows is down to 18 GBs now and winsxs down to 7.3 GBs, with the disparity between the 7 GBs less those folders report and the 5 GBs less the system disk reports no doubt because of the hard links in winsxs, that have been mentioned here before.

I've seen several threads here about large winsxs folders, but none mentioning this recent blog post from Microsoft so I thought I'd post this fix that worked for me.

A:Large Windows and winsxs folders taking up too much space

The large size of the winsxs folder is more apparent than real. Actually most of these files are just links to files that are stored elsewhere. Something like shortcuts but not the same.

Since Windows 2000 NTFS has had a feature where a single copy of a file can appear in multiple folders. But it was not until Vista that Windows used this feature, which it does for the winsxs folder. This saves considerable disk space but makes the determination of disk space used by a specific folder very difficult. It is not that the properties dialog is lying to you (as some have suggested), it is a question of what is the truth. There are no easy answers to that question.

The method used in the article should be safe. But there are some more radical methods from other sources and these should be avoided.

9 more replies
Answer Match 37.8%

So is there any way to reduce the message size so it fits in the preview pane? (like how you can hit ctrl+scroll wheel and change the IE8 font on a web page)

I upgraded from XP and am very impressed so far with 7 but the mail program hasn't changed much.

Thanks!

A:Windows Mail - Message too large in Preview Pane

Nevermind...I think I found it.

1 more replies
Answer Match 37.8%

Hello everyone,

I have a problem with my windows vista (ultimate x64).
It crashes in BSoD every time I try to download one or more large files at once (>=100Mb), or when I surf on many internet pages at once (e.g. when I start Opera and it opens 10 tabs simultaneously).

Anyone has the same problem/a solution please? That would be so great.

I hope it's not due to my hardware, since it's a new computer, but I had another o/s before (XP) on the same computer, and it didn't crash.

I hope you guys can save me =)

Greetz,
itlar

A:Windows vista crash when downloading large files

*Bump*

I'm sorry, but I really need help with this...

7 more replies
Answer Match 37.8%

I'm running Windows XP 32 bit.In the past few days my internet connection has been badly congested about 50% of the time. I am (unfortunately) using a 1mbps connection but was uploading on average 3000 packets per second, more than I thought was possible on my connection. Using TCPView I found that the cause of this was explorer.exe. The only reason I can even access this website right now is because I ended Explorer. I've tried using Malwarebytes as I assume this is a type of malware, but it didn't solve the problem.TCPView screenshot:As you can see, there are lots of separate packets being sent. I don't know much about this but maybe its some DDOS attack? Not really sure what to do next.

A:Windows XP: Explorer uploading large amout of packets

Welcome aboard Download Security Check from HERE, and save it to your Desktop. * Double-click SecurityCheck.exe * Follow the onscreen instructions inside of the black box. * A Notepad document should open automatically called checkup.txt; please post the contents of that document.=============================================================================Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory sizeClick Go and post the result.=============================================================================Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop. * Double-click mbam-setup.exe and follow the prompts to install the program. * At the end, be sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish. * If an update is found, it will download and install the latest version. * Once the program has loaded, select Perform quick scan, then click Scan. * When the scan is complete, click OK, then Show Results to view the results. * Be sure that everything is checked, and click Remove Selected. * When completed, a log will open in Notepad. * Post the log back here.Be sure to restart th... Read more

3 more replies
Answer Match 37.8%

I am using Windows Live Mail to send to my Verizon and msn accounts. I can receive mail consistently. I can send small mails consistently. If I try to send a larger mail...it gets stuck in the outbox and all subsequent mails stack up behind it.

Right now, there is a 900kB mail in my outbox. If I try to send to my Verizon account, I get a message:

Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity.

Subject 'Fw: Test Message'
Server: 'outgoing.verizon.net'
Windows Live Mail Error ID: 0x800CCC0F
Protocol: SMTP
Port: 25
Secure(SSL): No
Socket Error: 10053

If I try to send to my msn account, I get:

Unable to send or receive messages for the Msn (myaccountname) account. To send and receive messages in your Hotmail account, go to Sign In on the Web, or try again later. To get help from Windows Live Customer Support, go to http://support.live.com and click Windows Live Mail in the list of services.

Subject 'Fw: Test Message'
Windows Live Mail Error ID: 0x80072EFF

I have tried without antivirus, firewall and spyware software running...and no change. I have turned off Vista's autotuning...no change.

Please help!!!!

A:Can't send large emails from Windows Live Mail

Have you checked the Verizon's causes and try to have fixed them?
I can't help you much because I don't use Windows Live Mail, though I do use hotmail. It seems for your hotmail account it is saying you haven't logged on though... you were logged on, right? Try going to the listed website for the customer support.

6 more replies
Answer Match 37.38%

Quote:
Fix Windows 7 SP1 Slow Startup Due to Large Number of Restore Points

A fix offered by Microsoft is designed to help customers deal with poor boot performance in specific scenarios involving Windows 7 and Windows 7 Service Pack 1 (SP1).

The Redmond company confirmed the issue and noted that impacted users have created a large number of restore points, a move which cause the slowing down of the startup process.

According to the software giant, affected customers are most likely using large hard disks in addition to create too many restore points on their machines.


Fix Windows 7 SP1 Slow Startup Due to Large Number of Restore Points - Softpedia

A:Fix Windows 7 SP1 Slow Startup Due to Large Number of Restore Points

Well, I don't think 50 is a big number - but I do agree 50 restore points are really more than what one (read: I) need.

That explains a bit or two. Will either take down these restore points to a sane number or apply this patch. Unsure which of them, but I will definitively work on this.

Thanks for sharing.

2 more replies
Answer Match 37.38%

I have a HP HPE-510t. It is running windows 10, clean install. I have a 240GB SSD, a 1TB SATA drive, and a 3TB SATA drive. All are NTFS formatted. If I transfer a 1GB file to the 3TB drive it makes it to 50% lightning quick and then slows down so slow it looks like it has stopped. Other two drives work fine. Files 560MB and smaller transfer fine. I don't know where the exact breaking point is between 560 and 1GB. Transfers to that drive do the same thing whether it's from those drives, a USB drive, or the network. Can this motherboard just not handle a larger than 2TB drive? I tried to find a BIOS update, but there's not one. Can't find an answer, going crazy, please help!

More replies
Answer Match 37.38%

Hi:

I have searched far and wide to a solution to this problem. The only solutions I have found are for Windows XP and do not work on Windows 2000.

Here is the problem:
Windows Explorer crashes when people try to view large AVI/MPEG/MOV files either in DIVX or in another codec.
The machines are Dell Precision Workstations with:
-Quadro 4
-512 MB RAM
-2.4 Ghz Intel p4
-80 GB HD
-Windows 2000 with all the latest patches

When you open the file within Windows Media Player, the files open fine. Once someone tries to click the file in Windows Explorer, Explorer.exe crashes then restarts itself. Each of the machines is running the latest NVidia drivers.

I have totally rebuilt the OS image from the ground up and we still have that problem.
I read somewhere that Windows XP tries to 'index' avi files but since the info is at the end, it gets caught in an infinite loop.
Is this the same as Windows 2000? The software installed on these machines are Maya 5.0, 6.0, Adobe Premiere 6.5, Adobe Photoshop CS, Adobe After Affects, etc...

Thanks in advance for any advice one can give.
 

More replies
Answer Match 37.38%

Hello there,

Yes; i am using ClassicShell, BUT i use the default Windows 8.1 Start button (cause i like the way it looks).

Thing is, when i change my taskbar icons to small, the size of the Start button is also scaled down. This looks out of place / ugly on the taskbar imo.

Does anyone here know if it is possible to use the original size and original Start button when small taskbar icons are used?

This is how it looks now:

A:Large Windows Start button when small taskbar icons used?

Hi there. Don't know how to reduce the size, but here's a little program that one of the members named hb860 created to eliminate it from the taskbar. I've used it for quite some time and works great. Hope this helps you.

http://www.eightforums.com/free-deve...artisgone.html

10 more replies
Answer Match 37.38%

For JPG files above 11mb, the edit controls in WLPG are greyed out. I can only edit files of 10mb or less.

Microsoft says to uncheck read only in the file's Properties but it is not checked.

I'm using Vista (32) on a laptop with dual core processor and plenty of ram.

Any ideas?

A:Windows Live Photo Gallery Can't Edit Large Files

Where is the JPEG located? Is it on a CD/DVD, Flash or SD Card? Or is it located on your C: drive? If it is on a removable media, save it to your C: before attempting to edit it.

2 more replies
Answer Match 37.38%

Okay I will do my best to try and explain this clearly.

I had one laptop hard drive crash/fail on me...so I purchased a new laptop and transferred all my files over via a window's backup and crash plan backup to make sure I got everything. Now the new laptop is having the same issue as the old laptop--obviously there is a corrupt file somewhere. The hard drive on the new laptop has not failed--yet--but 308GB of my 750 HDD has been sucked up by these temp files. I have attached a word doc with 2 screen shots--first showing the main window with all of these tmp files and the second with one file opened.

There 99 of these tmp files, with roughly 200,000 items in each taking up a lot of HDD space. I tried to delete one of these folders and the process took forever and it got hung up.

First, what are these folders and has anyone heard of this kind of issue.

Secondly, is there a way I can delete these files by by-passing the recycle bin since these things are so large. I thought I read somewhere I could use cmd to do this, but am not sure how.

I've used CCleaner and Malwarebytes and neither touched these files. As a matter of fact the Windows\Temp file never seems to get cleared out unless I manually delete what's in there. I was able to delete other files in that folder, just not these. I am getting very concerned for the life expectancy of my new HDD.

Also, one final note. I ran a chckdsk scan. It got hung up at 74% on Stage 1 and refused to budge from there... Read more

A:Need Help Extremely Large Files in Windows-Temp Folder Cannot Delete

You MIGHT have a root kit virus.

Some root kit removes...

Free Tools | McAfee Downloads

Sophos Anti-Rootkit - Free Rootkit Detection and Removal Tool

6 more replies
Answer Match 37.38%

1. Start Registry Editor (Regedt32.exe).

2. Locate and then click the following key in the registry:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atapi\Parameters

3. On the Edit menu, click Add Value, and then add the following registry value:

Value name: EnableBigLba
Data type: REG_DWORD
Value data: 0x1

Hope it helps!
 

A:How to access more than 137gb on large hard disks in Windows 2000

Needs Windows 2000 SP3 or later.
 

1 more replies
Answer Match 37.38%

Fix Windows 7 SP1 Slow Startup Due to Large Number of Restore Points

Fix Windows 7 SP1 Slow Startup Due to Large Number of Restore Points - Softpedia

http://support.microsoft.com/kb/2555428/






Quote:
The Redmond company confirmed the issue and noted that impacted users have created a large number of restore points, a move which cause the slowing down of the startup process.
According to the software giant, affected customers are most likely using large hard disks in addition to create too many restore points on their machines.

Microsoft did not explain just how slow the startup process gets, but it appears that boot performance degradation is sufficient for users to become aware that something it’s going on.

“This issue occurs because the boot plan for the ReadyBoot feature exceeds the size limit of 512 kilobytes (KB). Each restore point creates a snapshot of Windows that Volsnap.sys must validate during the startup process,” Microsoft explained.

“When you create many restore points, the boot plan for the ReadyBoot feature eventually exceeds the size limit of 512 KB, and cannot be stored. Therefore, startup I/O operations are not precached, and the startup process is slow.


my update went ok all done in 5 mins

A:Fix Windows 7 SP1 Slow Startup Due to Large Number of Restore Points

I suppose the real question is. How large is large?

2 more replies
Answer Match 37.38%

Windows Media Player opens large and then the window gets smaller when I open my AVCHD videos from my camera. It's really annoying. Can I get it to open in one size and have it stay that size so it doesn't resize on me?


Thanks

A:Windows Media Player opens large and then the window gets smaller

Answered my own question... right click on playing video and go to Video, then uncheck "fit player to video".

1 more replies
Answer Match 37.38%

Hello,

First of I would like to welcome everybody on this forum, whenever I had any trouble with my computer I managed to find the solution on this site, however, this time I am helpless, so I have registered myself.

Now, back to the case,

I am using Sony Vaio laptop with, i5 2410M, 8gb of RAM, NVIDIA GeForce 410M graphics card and sony motherboard, running Windows 7 Professional.

Couple of days ago computer started freezing when downloading torrent files, also during copying any larger files from partition D. I run checkdisk, literally checked what I could, found nothing, so I decided I will do a clean install of Windows. That did not help either so after excluding hard drive failure (no bad sectors, no errors) I decided to nuke the whole drive so everything would be fresh.
Used DBAN, which finished after 10 hours or so, no errors, everything went smoothly, including the install of fresh Windows 7 Professional.

There are no bug, errors, hard drive problems with the computer, I did run checkdisk again, checked the drivers, everything is fine.

I have managed to narrow the issue to Vuze Client, which was freezing the whole system, first after 5-15 minutes, then immediately after opening application. I also tried Deluge and BitLord - same thing, works fine and then starts to freeze the system.

I am able to use Chrome during the freeze for example, yet my internet connection is frozen too. I cannot restart the computer through the start menu, even if i mana... Read more

More replies
Answer Match 37.38%

Thought this was problem - Microsoft writes "When you resume a computer from sleep or from hibernation, the SATA hard disk drivers require the SATA hard disks to be ready within 10 seconds. However, a large SATA hard disk may take longer than 10 seconds to be ready. In this situation, the resume operation times out." in their fix for W7 - You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when you try to resume a computer that has a large SATA hard disk

Have tried a variety of things like checking all current drivers, turning off hybrid sleep, power troubleshooter, windows update and the like on instruction but my ASUS p7p55d-e doesn't seem to have any Win8 specific drivers.

boot drive C: (partitioned into two logical drives)

Looking further afield found your community hope that you may be able to identify the cause and possibly even a fix : )

Attached dump files as instructed.

Thanks

A:Windows 8 Large SATA drive time out on resume from sleep

Please post back if you still need help. I'm running way, way behind but will get to each post that's replied to.

9 more replies
Answer Match 36.96%

Hello there,

I have a problem on my computer where when I goto a folder with a large amount of .avi files, it crashes explorer.exe. I researched on google, people had the same problem and the way they fixed was by deleting windows media player, however I need windows media player to stream my videos to the xbox.

Any ideas?

Thanks!

A:Windows Media Player, Explorer.exe, Folder with large amounts of .avis

You could always split them into sub folders so there are less files present at once.

6 more replies