Tech Problem Aggregator

# Error message: An error occurred while loading a file. AOL will attempt to restore...

Q: Error message: An error occurred while loading a file. AOL will attempt to restore...

I have an error message: An error occurred while loading a file. AOL will attempt to restore the file. My emails, however, are affected. I have email icons without subjects. The emails do open but I cannot know what they are or who sent them prior to opening and I cannot download attachments, answer or forward the messages. This is a potential disaster if I cannot fix this quickly.

Any help appreciated.

A: Error message: An error occurred while loading a file. AOL will attempt to restore...

Quote:

Originally Posted by Feetone

I have an error message: An error occurred while loading a file. AOL will attempt to restore the file. My emails, however, are affected. I have email icons without subjects. The emails do open but I cannot know what they are or who sent them prior to opening and I cannot download attachments, answer or forward the messages. This is a potential disaster if I cannot fix this quickly.

Any help appreciated.

if you need to use aol, go to aol.com you can check your email there via the web so you should have no problems with downloading or what not

now onto aol.... dont use it unless you HAVE to

contact aol for support for their program..

thanks
Wolf~

4 more replies

When the computer starts right away i get this error message= a disk read occured press ctrl + alt + del to restart. My system is xp pro.

System manufacturer and model?

Louis

19 more replies

I have this message on this laptop once windows has loaded.

'Failed to save setting. An error occurred loading a configuration file: unable to open file'C:\users\.....etc...'

Apparently whilst web browsing something occured and on reboot this message appears and the profile doesn't load properly user documents and software not there etc..

Within the start menu the list of program folders are there but the folders are empty. Looking through the c drive and finding my way to the programs the stuff is there.

I created a new admin user to see what that does. The folders are still empty.

This is a windows 7 HP laptop. It also doesn't have a cd disc drive or a window disk apparently.

"This is a windows 7 HP laptop. It also doesn't have a cd disc drive or a window disk apparently."

If it has no CD drive it is most likely a "netbook" & not a laptop.
Try "rolling back" the system to an earlier date using System Restore:
Click Start > Run...........
Type rstrui in the run box, then click 'OK'

2 more replies

I turned on my computer, all my icons were gone and a message:
Failed to save settings. An error occurred loading a configuration file. It gave no suggestions how to repair this. Can anyone help? I am on a HP 2009m PC with windows vista. I tried many web sites for advice but I'm not very computer savy. Maggie R.

Hi, you could try a system restore. If this fails or is not available try this. Desktop items are stored in a cache, this can become corrupted causing what you see. To fix right click on the taskbar and select Task manager. When Task Manager opens under the Applications tab click on "new Task" type:- explorer.exe press ok. Your desktop should repopulate. At this time reboot your computer. If all is well then the problem is fixed if not:-

Repeat the task manager (as above) and new explorer.exe then follow this:-

Go to Start all programs accessories and right click on command prompt select ?run as administrator?

At the prompt type:- taskkill /im explorer.exe /f press enter

Now type each line and press enter after each line.
Note the spaces.

CD %USERPROFILE%\AppData\Local

attrib -h IconCache.db

del IconCache.db

Shutdown /r

9 more replies

I turned on my PC today for the first time in maybe 6mo, slow to boot up but that's expected. Got maybe ten minutes into using it (just fine, might I add. Linked to wifi, etc) and Norton popped up needing to restart the computer. Hit restart now, ten minutes
go by, PC is still trying to shut down. Black screen but the fan is running. I shut it off completely, push the power button again, and get the disc error. Try to restart twice with CtrlAltDel but same error. Finally soft reset (or try to, no indication that
holding the power button does anything) and then got the "Error loading operating system" screen. Now depending on how I restart it (trying to boot from the BIOS menu or boot menu) I get the disc read error but eventually come back to the OS error.

Nothing can get me into the system, period. I'm doing this from a secondary non-PC device. Any help is appreciated. I can get by on software fixes but I'm completely useless with hardware so all of the quick fix tips I've vaguely read have mentioned removing
things from the actual console which I'm hoping I won't have to do.

More replies

Hello!

I downloaded the SAC Desktop Alert from www.steepandcheap.com today on my work computer. (It works fine on my personal computer.) However, when the alert attempts to pop up & play the alert sound, which is a WAV file, the following message pops up:

"Sonic CinePlayer Decoder Pack - Please wait while Windows configures Sonic CinePlayer Decoder Pack"

The following message pops up on top of the one above:

"Sonic CinePlayer Decoder Pack - An installation package for the product Sonic CinePlayer Decoder Pack cannot be found. Try the installation again using a valid copy of the installation package 'CPDP.msi'."

After clicking "OK" several times (the error messages repeat 3 times), then those pop ups will go away & the SAC alert box will go ahead & pop up. However, it is suppose to pop up w/o the errors & play the alert (as it does on my home computer).

I looked in my Program Files & there is a "Sonic" file that includes a "CinePlayer Decoder Pack" file w/ a "cmdvdpakENU.dll 4.1.0.2 CinePlayer DVD Decoder Pack Resources" file w/in it.

I'm not sure if this version is what I need to avoid these errors & if it was just a matter of allowing something to point to this Sonic file?

Also, if I go into the "SteepAndCheap" program file, then "Desktop Alert", then "Resources", then "SAC", there is the "alert" WAV file. When I click o... Read more

A:Solved: Attempt to play WAV file in Windows Media Player 11 creates error message

sounds like Sonic CinePlayer is missing files just reinstall the program should fix the issue for you.

Also depending on where you work check with your IT guy if you have to cuz he/she may get grumpy if your trying to install stuff like this on your work computer, I know I hate when my employees install personal stuff on their computer, but then again thats just me.

2 more replies

Greetings,

I am in desperate need for some assistance. My laptop recently has been giving this message before reaching the desktop: "A disk read error occurred. Press ctrl+alt+del to restart. I have tried restarting multiple times (including manually restarting), but I ended up receiving the same error. My operating system is Windows XP.

What can I do to approach this problem? I would be very grateful for any assistance.

~Trav.~

A:Solved: Desperate need for assistance for error message: "A disk read error occurred.

16 more replies

I've got several old astronomy programs that will only run under windows xp. I have new Toshiba laptop running Windows 7 Ultimate, 64 bit on a Pentium dual core cpu with 4gb of ram.
Using Windows 7 I created a new partion, an F: drive.
Following the dual boot setup procedure, I'm starting from the dvd drive with a genuine windows xp sp2 disc.
The system tells me to press any key to boot from the dvd drive, when I do, I get the message "windows setup" at the top of the blue screen and after a couple of messges about raid drivers, "Setup is loading files (list of files loading) at the bottom of the screen on a white background. I then get a message "windows is starting"
After that I get a screen that says "A problem has been tetected and Windows has been shut down to prevent damage to your computer, etc.

Technical information:

***stop: 0x0000007B (0xf78d2524,0xc0000034,0x000000000, 0x000000000)

Any help would be appreciated.

This is likely because XP CD doesn't have the more modern SATA drivers for your HD.

They need to be slipstreamed into the installer, unless you have a floppy drive you can load them from during Driver Loading phase at F6 prompt.

How To Slipstream SATA Drivers Into XP CD

Have you tried installing your older programs in XP compatibility mode offered by Win7? Right click on their .exe files, select Properties, then Compatibility Tab. Run as Admin. It works about half the time, I have found. Try also the Wizard, which may want you to dial it back even further to SP1 or 2000.

5 more replies

I am running XP Home edition, with IE 8. All updates have been installed for both packages, in addition all updates for other programs have been updated and installed when appropriate.

MS Office 2000 (With MS Outlook 2003) has been working on my POC almost flawlessly for several years. All of a sudden it has been acting funny. So I decided to reinstalled / repair it.

I have a hard time updating and repairing Office 2000. I keep getting the error message code 1316, networking error. DATA1pro.msi. I have followed MS help site word by word, but to no avail. http://support.microsoft.com/kb/263253

Ø I did a virus info update and full scan
Ø Scanned for spy ware, with two packages, Ad – Aware and A-Square.
Ø Defragged
Ø Checkdsk
Ø Registry cleanup
Ø Removed all startup items that aren’t necessary
Ø Tried disabling the anti-virus software
Ø I also ran an XP system repair and a system file check
Ø Cleared all Temporary Internet Files and cookies, etc. (I usually run http://www.ccleaner.com/ CCleaner on start-up).
Ø I disable the Find Fast Indexer http://support.microsoft.com/default...&Product=ofw97
or http://tinyurl.com/tkwm
Ø Tried to run system restore and did not work.
Ø I copied the entire CD's content to the hard drive and perform following steps:
o xcopy e:\newcopy /f /s /e /i /h
- Opened the Setup.ini file on the hard drive
- Changed the "MSI=Data1Pro.msi" line to "MSI=Data1.msi"
- Saved the changes m... Read more

More replies

I recently installed service pack 3 for Office 2003. Now when I open Excel I get the following error message:

Microsoft Visual Basic

If I click yes Excel opens correctly, however Module1 (which contains macros from personal.xls) is not accessable. Any suggestions?

I have no way of knowing if this will work, but I would do the following.
Copy personal.xls to a removable storage divice, then try opening it in Excel 2007, or OpenOffice, on a different PC.
If successful, then save the macros into a text file. Delete the original personal.xls, and then create a new one.
Copy the macros back from the text file.

Jimmy

1 more replies

Got an directx error message while loading into a dragon inquisition save file. I never had this problem before and i have played over 50+ hours on this game.

DirecX function "GetDeviceRemovedReason" failed with
DXGI_ERROR_DEVICE_HUNG ("the applications device failed due to
badly formed commands sent by the application. This is an design time issue
that should be investigated and fixed.") GPU: "Nvidia Geforce gtx 970", driver: 35286

If there is a configuration/settings file, backup somewhere and delete to see if game will recreate a default one.

You can also try to install the DirectX installer possibly in game/redist folder. Maybe it got corrupted somehow.

3 more replies

My Lenvo X1 Carbon just went through a big Windows 10 update to version 1511, Build 10586.14 Now whenever I open the control panel I get a warning dialog box titled "Power manager" with the text "An error occurred while loading resource DLL." i have tried uninstalling and reinstalling the Lenovo power driver vrs.10.67.10.20 and the problem still occurs.How do I correct this?

Solved!
Go to Solution.

We have this problem on a ThinkPad Yoga S1 running Windows 10.  The machine is brand new with a fresh upgrade to Windows 10.  I've un-installed the things relating to Power Management and Power Manage Gauge and then re-installed them through Lenovo's "System Update" -- still comes back on boot-up every time. Does anyone have the solution for this?

4 more replies

In our company we decided to upgrade our old Access 2003 at last. And after this upgrading I can?t load any .mdb files. They are inaccessible. Every attempt to open it is accompanied by an error: ?An error occurred while loading Form_FormName. Do you want to continue?? If I click Yes, then pops up another error: ?Invalid procedure call or argument?. Colleagues tell me that it a cause of corruption and that the cause is upgrading of the Access I want to know, is it true? Which follow-up actions do we make?

Hi Quetzal, welcome to Windows Seven Forums.

Later versions of Access use an .accdb suffix & not the .mdb suffix & this is the cause of your problem. As you mentioned updating from Access 2003 I assume you are now using Access 2013, so these websites might help you.
In the first one scroll down to the links contained in it & follow those as well. The second one may not be relevant but it does contain some info that might be of interest to you.

access 2013 won&#39;t open or offer to convert MDB files - Microsoft Community

2 more replies

I saw a few old posts about this same topic, but none quite fit my situation so I'm starting a new post to request help/suggestions. Sorry for the length, but the instructions say to be as detailed as possible.

My System: I'm running Windows Vista Home Premium 64bit on an HP Pavilion dv7 Notebook PC.

MY PRIMARY PROBLEM: Inability to do a System Restore after multiple attempts using various restore points.

First, I'm including what predicated my original attempt to do a system restore. While working on my computer on Sunday evening, some sort of error message popped up, but it disappeared before I really saw what it said. However, the result was that when I next switched to IE8, it wasn't working properly. I seem to recall it saying something about "i.exe" in the original quick message that disappeared on me & later saw something about missing java script, but this was before I knew I had a big problem so I didn't actually note the details.

FIRST FIX ATTEMPT:

My first step at resolving this was my standard one - Shutdown & Restart. When I did this, I stepped away from the computer & came back to see that it was doing a disk check. As it does this from time to time for no apparent reason, I wasn't too worried. However, when the system came back online, there were several obvious issues including.
My background picture changed back to some sort of default & all of my desktop icons were rearranged to sort of a standard setup.The items that ... Read more

A:Unspecified Error Occurred During System Restore

Hello Suzyc!

Excellent work on your post! It is very rare for someone to make so much effort, and it makes so much of a different to us!

I have seen similar issues to these before. All slightly different, but I know of a few things to check out.

1) Click on the Start Orb > Computer > C:\ > Users

You must do it through My Computer please, as instructed. Do you see two copies of your Account Name. For example, if this were me:

All Users
Default
Default User
Public
Richard
Richard

^ Two of my name. Tell me if this is the case on your computer.

I doubt this will be the case.

Go into your Account Folder (Richard for me)

If there are, go into each one in turn. One will contain your actual data, one will contain the data of a new computer. Delete the ones which come from a new computer, leaving only the ones with your data in them.

Log off and back on again.

2) Norton is not the only program to do this. What anti-malware tools do you have. McAfee, MSE, ESET, Spybot S+D with Tea Timer, Webroot

The two in bold have a far worse reputation of causing this problem than Norton does. I need to know if you have either of these two programs installed.

3) Are you backups disconnected and safe?

4) I need to take two logs. The first log will help me diagnose your System Restore issue, your SFC result, and other lurking problems.

15 more replies

hello guys,

thats what i get everytime im trying to do system restore
an unspecified error occurred during system restore (0x8007051a).
im restoring from windows installation dvd and i tried many times with different dates of system restore.....

A:an unspecified error occurred during system restore

its been two days now guys,can somebody help?

also i forgot to say that i cant create a windows recovery disk,files are missing.......

5 more replies

Hi
i am trying to restore my system to an earlier point but it gives me error message an unspecified error occurred during system restore. (0x80070002)

actually i installed avast and did boot scan. after scan a different profile was loaded by avast ... so to get to original profile i uninstalled avast .... but after uninstalling when i tried to login my profile it simply log off

i have no system image so i tried to restore at previos point which aint worked either

looking for ur support

A:an unspecified error occurred during system restore. (0x80070002)

Hi,

Have read more about here Solved 0x80070002 error in Vista Backup Centre

2 more replies

"an unspecified error occurred during system restore (0x8000ffff)"

I made a restore disk on my 64bit win7 desktop for my 64bit win7 laptop because windows stopped loading. Now when I try different restore points I get the same problem. Should I make a new disk? What else could I try?

Quote:
I have a normal stock dell desktop with windows 7.

I borrowed my grandmothers laptop. It is an Acer Aspire 5736Z-4790 w/ an Intel Processor. Last night after trying to install some files to make some cheat programs I use for an online game (I have loaded same programs 10x on other computers so I doubt its related to the programs themselves) One thing I did do was try to delete a winhttp.dll file in system32 or the WOW one(for 64bit computers? Forget the folders name) and replace it with another one(Directions for the cheats said to make sure that winhttp.dll was in sys32) and while trying to do that windows would not let me so I read somewere that there is a program that lets you "take ownership of a file" so you can override permissions. I then took ownership of sys32 and maybe the 64bit folder as well. It still did not let me replace any files in sys32 so I then restarted and when windows opened again, desktop loaded then an error message came up, then it restarted itself, and repeated, but after the second time it restarted itself windows would not load. After the Acer manufacture screen, just the blank black ... Read more

A:Error during restore. "An unspecified error occurred during system.."

Lost &

Are you trying repair all three?

Boot into safemode from the command Prompt? Possible?
Making a recovery disk for another computer? & File Ownership of Sys32
Error during restore. "An unspecified error occurred during system.."

1 more replies

I sent my computer to be wiped clean about a month ago due to viruses/malware and things of the like. A coupleweeks after it was picked up I started getting an error message that says no OS found on harddrive. Sometimes it immediately goes to the message at startup but most of the time it allows me to use my laptop for few min or hours then it says critical error will restart for when corrected and then it goes to the previous message about no OS on hard drive. HELP please. This is the computer I use for EVERYTHING including my work

More replies

an error message keeps coming up when I try to get registered as a new member. It reads as follows- Exception EReaderError in module Imesh client>EXE at 00022643 Error reading I Resolution.Item.strings: a call to OS function failed. Is this a problem with my computer or is it imesh?. please help.

A:error message on registration attempt

Hi,

I have tried to find the spacific error code mentioned, but with no luck, have a read here though, it will give you a insight into Imesh:

http://home.iprimus.com.au/theaxe/p2p/p2p.htm

Just a comment, I would uninstall Imesh and go for another p2p program not containing any spyware / adware.
Wizzkid

1 more replies

an unspecified error occurred during system restore (0x8007051a)

everytime im trying to restore my system to earlier point i have the same,and i tried different restore points and several times,
im doing the restore from windows installation disk.

A:an unspecified error occurred during system restore (0x8007051a) windows 8,1

Have you tried THIS    ??

15 more replies

My apologies if this has been gone over before,but i'm asking this in desperation (almost) !.  I used Outlook Express for years when i had Win.XP on my old PC without a single problem. In the last 18 months,since i've had my new PC Win.7 Home Premium 64 bit. i've had to use Windows Live Mail & it's utter c**p !. Almost every day without fail,when trying to send or open an e-mail,i get the rerror message attached.The only way i can get Live Mail to send or open any e-mail, is to log off & re-boot my PC ,which is a PITA,especially as when a few months ago,i was taking part in some pretty lively correspondence on line.   Is there a definitive cure for this problem other than switching to another e-mail system  ?. I've searched the I/net for a solution,but all i find areboat loads of others with exactly the same problem & no answer & definitely no respose from Microsoft.   I would get rid of Live Mail & install another mail system if only i was sure that i wouldn't make a total mess of it as i'm not 100% PC literate.So,any serious advice will be deeply appreciated,

A:Windows Live Mail error message - "A problem occurred.......

Unfortunately, that error message is pretty generic -- without some sort of error code, it's hard to troubelshoot.

You can try going to the Start menu, select Control Panel, Programs, Programs and Features. Select Windows Live Essentials from the list of programs, select Uninstall/Change at the top menu bar, and then select Repair all Windows Live Programs.

6 more replies

Hello there!

I'm currently running Vista on my Compaq laptop. Unfortunately (long story) my key for Avast Antivirus expired in January 09 and I was unable to input the key code until September 09, so I guess the virus found it's way onto my computer during that time.
I ran a scan after finaly inputting the key and Avast found several infected items. Some could be removed, but since that scan I've been getting the following message after starting-up the laptop:-

Also, since the initial scan and appearance of this error message I've been having various problems -
* Laptop running slow
* Media player not running (won't open/run) - cannot play any music!
* Photo Gallery icon blank and won't open - cannot access my photos!

I've since uninstalled Avast and installed a free version of AVG. Neither seem to be able to get rid of this virus.

This is the MBAM report from the scan (which picked up several infected items):-

Malwarebytes' Anti-Malware 1.41
Database version: 3253
Windows 6.0.6002 Service Pack 2
28/11/2009 12:17:00
mbam-log-2009-11-28 (12-17-00).txt
Scan type: Quick Scan
Objects scanned: 98257
Time elapsed: 6 minute(s), 15 second(s)
Memory Processes Infected: 0
Memory Modules Infected: 0
Registry Keys Infected: 2
Registry Values Infected: 2
Registry Data Items Infected: 0

More replies

Hey guys !

When I attempt to open a word document, I get a error message :

Word failed reading from this file. Please restore the network connection or replace floppy disk and retry.

I'm left with 2 options - retry and cancel.

I see my text in teh background, however I can't access it because the popup box is in the way.

I'm running it off a local hard drive.

Does anyone know how I can repair this ? It's a very important document.

Thanks.

A:When I attempt to open a word document, I get a error message

Welcome to TSG

support.microsoft.com > How to troubleshoot damaged documents in Word 2007 and in Word 2010

1 more replies

When I boot my computer-Dell Studio--laptop--running Windows Vista--I get this error message--
The specfied module could not be found.

I removed it but this appeared afterwords.
Hope someone can help me get rid of this.

More replies

Help! I started to get an error message after I deleted the last infected file from my computer and then I got this error message that looked like this (see attachment) except it had different text, though. When the error message comes up I'll capture it.

I believe you may have some residual damage or still may have a virus -

NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum

After running through all the steps, please post the requested logs in the Virus/Trojan/Spyware Help forum, not here.->

Virus/Trojan/Spyware Help - Tech Support Forum

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

IF they say you are clean, then I or someone will work with you to clean up your startups.

3 more replies

C:\PROGRA~1\MYWEBS~1\bar\1.bin\MYSBAR.DLL

Thanks for any help, DB1

7 more replies

I'm new here, but trying to obey the guidelines.

System details:
Asus P5B Deluxe WiFi
Core2 Duo E6600 (stock)
2x1Gb DDR2 Corsair PC5300
Gigabyte GEF 7600GT, 256Mb, DDRIII, PCIEx16
WD 3200KS, 320Gb Sata II
XP Home SP3

I recently upgraded backup imaging software - Acronis True Image Home 2012. That seems to have been the first error. Acronis support eventually got the install done - though without complete removal of the previous version, according to "Add or Remove Programs". Backups are now enabled but any attempt to restore causes BSOD and reboot.

Event details :

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 25/10/2011
Time: 11:04:43 AM
User: N/A
Computer: FORESIGHT-HOME
Description:
Error code 1000008e,
parameter1 c0000005,
parameter2 8052e7b7,
parameter3 b7a9d3a8,
parameter4 00000000.

Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 38 1000008
0020: 65 20 20 50 61 72 61 6d e Param
0028: 65 74 65 72 73 20 63 30 eters c0
0030: 30 30 30 30 30 35 2c 20 000005,
0038: 38 30 35 32 65 37 62 37 8052e7b7
0040: 2c 20 62 37 61 39 64 33 , b7a9d3
0048: 61 38 2c 20 30 30 30 30 a8, 0000
0050: 30 30 30 30 0000

Following advice from Acronis support I have successfully run Chkdsk without errors, and run Memtest for 15 re... Read more

A:System Error Cat (102) Event 1003 caused by restore attempt

Re-install XP fresh along with all the million plus updates

2 more replies

A:An I/O error occurred while installing a file

Think you've answered your own question - my guess would also be a corrupt installation file. I'd download it again over the one previously and try to install again.

2 more replies

OK, I have Windows 7 64-bit installed. Whenever I try to install a program called Auslogics Disk Defrag or Auslogics BoostSpeed, en error message pops out which says an error occurred while trying to read the source file.

I am using Download Accelerator Plus and I can download these files with no problems. But whenever I try installing them, this error message pops out. I tried to click ignore or retry but it did not install these programs.

What is the reason for this?

A:an error occurred while trying to read the source file

Hello Blanchflower,

In my honest opinion, I think it's time to start looking into a clean reinstall of Windows 7. Considering your previous problem with viewing video, it sounds like there is something just not right about your PC at the moment.

Sometimes you invest a lot less time starting over from scratch than getting to the root of multiple problems.

Please listen to me as others would suggest to you just as well... Image your new installation of Windows. When you start having problems like this, you could just reload the image and everything will be fixed in a matter of minutes.

Just something for you to consider.

8 more replies

I have tried everything to sort this issue out. I am trying to install a patch for pro evolution soccer 2013 and as it is installing i get the error message in the title, i have tried changing take ownership options, i have looked at tutorials on it and have even done the take ownership hack but i have get the same error message when installing.

I even have issues with you dont have permission when move a dll file to the pro evolution soccer game directory. I have to restart for it to work and once i quit out of the game the dll disappears and when i try to take it out of the rar file i get same issue.

Im tearng my hair out.

A:an error occurred while trying to rename a file code 5.

Have you tried right clicking the patch.exe and click "run as administrator"?

2 more replies

When I startup my computer as the desktop launches a message comes up stating:

The specified module could not be found

What does that mean and how is it affecting my computer. When I run a system scan with Norton Internet Security and SystemWorks it says my computer is fine but I know that has to be doing something. Does anyone know?

Thanks in advance for any help that might be offered.

Please read the Five-Step Process and post the resulting HJT log at the following TSF forum: HijackThis Log Help.

2 more replies

About a year ago I installed a cyber sitter called "iProtectyou" on my son's computer. I decided to uninstall it for him recently because it didn't work, and it only seemed to give him a hassle when he tried to use the internet or play games. When I tried to reinstall it, it would not take the password I used (I could of forgotten it, but I had it written down).

After hours of trying to uninstall it, I went to the internet and Googled how to get rid of cyber sitter's with a forgotten password. Luckily there were several people with the same problem. I downloaded the applications they gave out on the site, and eventually got rid of it. They also had me go to the "Registry Editor" (run: regedit) and screw around in there. The program still shows up in "Programs and Features" but theirs no publisher now, and I still cannot install it. Except now, instead of asking for a password, it just says that their was an error with database.

Now when ever we open up anything, we are swarmed with windows telling us "Crictical Error Occured While Opening Database."

Any help would be great.

A:Critical Error Occurred While Opening the Database File

Have you tried this: http://www.securitystronghold.com/gates/iprotectyou.html?

6 more replies

Error 1316A network error occurred while attempting to read from the file: C:\WINDOWs\Installer\UPDATEPrevx2.msiI cannot install Prevx2 on this computer. Microsoft Windows XP HomeWindows XP Personal Service Pack 2Kernel Version 5.1.2600.3093Security 128 bitsBuild Lab 2600.xpsp_sp2_gdr.070227-2254Automatic Updates Automatic (Recommended)System Restore DisabledERUNT 1.1j AVG Anti-Rootkit FreeKeyScrambler NOD32 antivirus systemSophos Anti-Rootkit 1.3.1 Spybot - Search & Destroy 1.4 SpywareBlaster v3.5.1Windows Firewall CCleaner JkDefrag 3.16 Recuva RegSupreme Pro 7-Zip 4.42 CDBurnerXP Pro 3 3.0.116 Foxit Reader Java 2 Runtime Environment, SE v1.4.2_15 1.4.2_15 Microsoft Visual C Runtime 8.0.0 Mozilla Firefox (2.0.0.6) (en-US) Mozilla Thunderbird (2.0.0.6) (en-US)Opera 9.23 Windows Internet Explorer 7 NVIDIA Display Driver NVIDIA nForce Drivers No problem installing it on the other: XP Pro with many of the same programs, except paid version of Wordweb, JV16 instead of RegSupreme Pro, WinZip and WinRAR instead of 7-Zip, and the addition of IceSword, Sandboxie, K-ninja, and K-meleon

A:A Network Error Occurred While Attempting To Read From The File:

Error 1316A network error occurred while attempting to read from the file: C:\WINDOWs\Installer\UPDATEPrevx2.msiI cannot install Prevx2 on this computer. Microsoft Windows XP HomeWindows XP Personal Service Pack 2Kernel Version 5.1.2600.3093Security 128 bitsBuild Lab 2600.xpsp_sp2_gdr.070227-2254Automatic Updates Automatic (Recommended)System Restore DisabledERUNT 1.1j AVG Anti-Rootkit FreeKeyScrambler NOD32 antivirus systemSophos Anti-Rootkit 1.3.1 Spybot - Search & Destroy 1.4 SpywareBlaster v3.5.1Windows Firewall CCleaner JkDefrag 3.16 Recuva RegSupreme Pro 7-Zip 4.42 CDBurnerXP Pro 3 3.0.116 Foxit Reader Java 2 Runtime Environment, SE v1.4.2_15 1.4.2_15 Microsoft Visual C Runtime 8.0.0 Mozilla Firefox (2.0.0.6) (en-US) Mozilla Thunderbird (2.0.0.6) (en-US)Opera 9.23 Windows Internet Explorer 7 NVIDIA Display Driver NVIDIA nForce Drivers No problem installing it on the other: XP Pro with many of the same programs, except paid version of Wordweb, JV16 instead of RegSupreme Pro, WinZip and WinRAR instead of 7-Zip, and the addition of IceSword, Sandboxie, K-ninja, and K-meleonSomeone here practice some sort of magic. The problem has gone, so far. I am in my apt in nyc. i'm attending the infosecurity representing, Subliminal Eclectic Enquiry, the eccentric virtual and real research company that I work for. You have to attend one of these.well my problem gone, mysteriously. Seems some other folk had the same. Any... Read more

2 more replies

Some clients of ours have difficulties installing our MSI application.
When looking into the MSI.log, You see the following error.

DIFXAPP: ENTER: ProcessDriverPackages()
DIFXAPP: ERROR - The operating system you are running on is not supported. Only Windows 2000, Windows XP, Windows Server 2003 and Windows codenamed Longhorn are supported.
CustomAction MsiProcessDrivers returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (E8:28) [15:06:16:300]: Machine policy value 'DisableRollback' is 0
Action ended 15:06:16: MsiProcessDrivers. Return value 3.

Looking around on the internet, there were 2 suggested fixes:

1)
To resolve this issue, check if the Windows Application Compatibility setting is turned off in Group Policy Object (GPO).

Turn off Windows Application Compatibility as follows:

1. Launch the Microsoft Management Console (mmc.exe) and add the Group Policy Object snap-in
2. Browse to the Computer Configuration\Administrative Templates\Windows Components\Application Compatibility folder
3. Select "Turn Off Application Compatibility Engine"
4. Set this policy to be enabled in order to turn off Windows Application Compatibility
2)
Does anyone encountered this error before and know what to do with it?

A:Failed attempt at installing MSI file - DIFxapp error

This MSI is under your control - correct?

Try this: Mark's Stuff: Fixing Error 1603 on MSI installs

Quote:

You will need Orca MSI Editor from the Platform SDK installation ( I used Windows 7 Platform SDK). For these particular errors, it a problem with the DIFXAPP drivers in the installation package. I got updated files DIFxApp.dll and DIFxAppA.dll from the Windows Driver Kit for Windows 7 and Windows Server 2008 (from MSDN Downloads).

Open the MSI file in Orca MSI Editor. Select the Binary table on the left. You should see the 2 dll's listed on the right.

Delete each of these rows: right-click on the row and select "Drop Row".
Right click in empty area on the right side and select "Add Row". Navigate to the location of the updated drivers from the Drivers Library (C:\WinDDK\7100.0.0\redist\DIFx\DIFxApp\WixLib\x86). Add both the DIFxApp.dll and DIFxAppA.dll files, making sure the row name is the same as the DLL file name.
Save the MSI file.
Install.

1 more replies

I left my Dell Inspirion 600 laptop on over night and it died. Once I charged it and turned it back on the next day, I received this error upon starting windows...

Press CTRL+ALT+Del to restart

Is it possible my hard drive just crashed??

*Currently using my Dell Desktop PC to research info on this error

Thanks

hi, do you have a diagnostics partition on your inspiron, on mine I press F12 as the computer boots. If you do, run the extended test on the hard drive. At this point I should ask if your important files/pics etc are backed up as any test on a failing hard drive is intensive. You ask if your hard drive "just crashed", have you tried restarting to see if you have access.

5 more replies

My operating system is XP. My (Western Digital) master drive was getting too cluttered, so I decided to reformat. I changed the BIOS to boot from the CD-ROM and proceeded. After that was completed, I installed a second hard drive (Maxtor Ultra ATA/133 160GB). After insuring the jumpers were in the correct position (my 40G (master) to hold the OS, and the 160G (slave)for storage, I powered up. The OS loaded, but I remembered that I needed to change the BIOS to boot from the hard drive instead of the CD-ROM, and I got the error message "Error loading OS". I was told that I now have a "bad boot sector". If I don't get a cure for this, I'm going to have some unhappy people on my hands, and I was wondering if you might be able to offer a cure. Thank you. Sincerely, Ms. Nongeek

More replies

Hi all,

Huge problem regarding permissions on my (massively unstable) PC. I try to run ANYTHING including .dlls with admin permissions and i get a nice little "ding", and error message regarding the relevent .dll and File system error -1073741792, including one just before I get to the logon screen (think it was called "WINMM.dll", which yes, is "microsoft mouse", but my mouse still appears to be working sooooo... confused... lol).

Also, when i try to system restore, I get an unspecified error, code (0x8000ffff). I don't get anymore info, it just apparently can't do it.

All this came about when i started my PC up after changing/installing NOTHING (since it last worked perfectly), and it randomly said the disk integrity of C: (64GB kingston SSD running the OS but no installed programs) had to be checked, before several black screens of text whizzed by, deleting and then repairing registry entries. It has done this once before, (completely different symptoms, but same root cause of this windows integrity checker thingy), but i fixed it by transferring my account files to a new account, deleting the old one, and presto, instant new admin profile with full permissions again, but problem is, what with nothing that requires admin status working, I can't create a new account this time.

If anything seems unclear about what I've just written, please ask, and I'll clarify, but I've been battling with this all day, and need to get some rest befor I ... Read more

A:File system error (-1073741792), Sys restore error (0x8000ffff)

Why is your PC unstable? Has it always been this way?

5 more replies

Ok so suddenly for no reason my computers starts acting unresponsive with numerous applications. Now I do what every good little Vista user does and tries to do a system restore. Now unfortunately system restore doesn't want to work ! I've tried this about 3 times so far with the same message, "An unspecified error occurred during system restore."

Help?

A:"An unspecified error occurred during system restore"... several times in fact...

Hello PaC,

Try putting the applications to run as 'Computer Administrator'. Hope this helps!

Regards,
alienware
_________________________________________________________________________
Think I helped you out? Click the scales and give me some rep! Thanks!

8 more replies

trying to use restore disk.... coming up with a error message..will not restore
when in bios, computer shuts down after only a couple minutes but no other time.
I just want to get the computer working again...i want to get the restore disk to work

A:Trying to use restore disk. Coming up with a error message, will not restore

What is "restore disk"? Are you talking about system restore feature in Windows or a disk image backup utility or something else?

-- Andy

8 more replies

Windows Mail suddenly does not send or receive messages. When I attempt to send a message, I receive the following error, "The message could not be sent. An error has occurred." When I click the Send and Receive button, the pop-up box comes up, but not long enough for me to read anything. However, it appears to complete the send/receive process with no errors. I have had issues in the past and often received an error number, but not this time. When I go into my accounts, I have changed the password to my incoming server to the wrong one to see if it recognizes the error and have also changed port numbers and still receive no error. I have attempted working offline and double-checked to ensure it recognizes the wireless internet connection - which it does.

I do not currently have and have never had any anti-virus programs installed on my computer. I have logged into my email through my browser and deleted all emails from all of my folders, closed Windows Mail and then re-started it to no avail.

I would just upgrade to Windows Live Mail, but I already did that once before when I was experiencing other problems with Windows Mail, and that program has also stopped working correctly so I had to go back to Windows Mail. Therefore, it appears that if I cannot get this issue resolved, I will be stuck using my browser (which is not very user-friendly) and my iPhone. Needless to say, I am quite frustrated with Windows Mail and Vista!

A:Windows Mail - "The message could not be sent. An error has occurred."

First let's fix the major problem of not having an antivirus! For now please download Malwarebytes and run a full, updated scan. Malwarebytes : Free anti-malware, anti-virus and spyware removal download That should clean up any bad software on your computer. And I would imagine you have a lot... There are plenty of good free antivirus programs out there, most of the people on this site highly recommend Microsoft Security Essentials. Virus, Spyware & Malware Protection | Microsoft Security Essentials

After running malwarebytes, see if your mail problem is still occurring.

Personally, I just have to recommend you switch to using Mozilla Thunderbird, instead of Windows Mail. It's very clean and easy to use. And free. Check it out. Mozilla Thunderbird That's just a personal suggestion, you don't have to if you really like Windows Mail

6 more replies

Hi, I am currently based in Germany and cannot work out why I cannot access 2 associated websites:
Virgin Blue Airlines : www.virginblue.com.au
Velocity Rewards (reward program of Virgin Blue Airlines): velocityrewards.com.au

Error message always received when I try to get onto the above 2 sites:
?DNS error occurred. Server cannot be found. The link may be broken.?

For reasons that I cannot understand, I have never been able to log on to them from my laptop at home in Germany.

However, when using the same laptop in Australia with a different internet service provider, there is no problem with accessing the above sites so I know that I can reach the websites with this laptop.

I have tried many things including calling the airline directly to see if they have an IT help desk or if they are experiencing website problems. No to both. I have tried typing in the addresses directly into the URL field, clicking on through a link etc and nothing works. As far as I can see, the websites aren?t blocked by my antivirus software. I do not have problems accessing any other websites.

My set up: laptop with wireless internet connection at home.
I use Windows XP, Internet Explorer 8, AVG 9 free edition software. Run anti-virus scans every 2-3 days and no viruses detected. No new software installed for some months.

My I T ability is of an average standard so hopefully the solution will not be too complicated. Would really appreciate it if someone can help me to sort ou... Read more

A:Message "DNS error occurred. Server cannot be found ..." - help please !

Hi there,

Sometimes ISPs block certain sites. It may be worth checking with them to see if there is a block on it for some reason.

You could also try going onto a proxy surf site and accessing it from there incase the site has blocked your IP for some reason.

Dave

Dave

4 more replies

Good morning people, got a MSI 870-G54 that I'm starting up for the first time set to raid 1. When I go to load the OS (7 pro). I get an message that reads "A required CD/DVD drive device driver is missing. If you have a driver floppy, cd, dvd, or usb flash drive. Please insert it now" Any one got a clue to what I'm doing wrong? Thanks in advance for your help.

Go into the BIOS & turn off IDE Emulation for SATA drives.

1 more replies

I recently purchased the WD6400AAKS SATA hard drive for my Compaq S5000NX system running Windows XP Pro, because Windows would give me messages saying "Error Loading OS" or "Operating System Not Found" when I booted up. I figured the hard drive was on its way out so buying a new one would fix my OS Error problem. Although that system supports IDE hard drives rather than SATA, I got a very good deal on the drive and couldn't pass it up. I found a SATA to IDE converter that attaches directly to the back of the drive and it works fine. Before I purchased this drive, I was running 3 hard drives total, a 40 Gig Western Digital as my main boot drive, a 160 Gig Western Digital and a 120 Gig Segate, both as slave drives, with a Sony DVD Burner. My problem starts here. When I boot up my system on just my 120 Gig Segate Drive with Windows on it, everything works fine. I can access the BIO's and it shows that the drive is present, etc. I then reboot my system and attach my newly purchased 640 Gig Western Digital drive as a slave to my 120 Gig Segate Drive running Windows, as well as my 160 Gig and my DVD-ROM. All have the correct master/slave settings. Everything works perfect when I boot up, I can access files, move them anywhere, etc. As soon as I restart the computer, or shut it down, it gives me an error saying "Error Loading OS" on my next boot. I hit ctr-alt-del to restart, and get the same message, over and over. If I unplug those 3 IDE dri... Read more

11 more replies

running vista. get error message

Error loading c:\\Windows\$NtUninstallMTF1011$\mmduch.dll
The specified module could not be found

is this important file,if so, how can I reinstall it.

Hello -

That is an indicator of infection. The file may be gone, but the registry might still be looking for it.

We want all our members to perform the steps outlined in the link I'll give you below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:

Having problems with spyware and pop-ups? First Steps

link at the top of each page.

---------------------------------------------------------------------------------------------

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note: If you don't reply within three days of this post, this topic will be closed.

2 more replies

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2300 @ 1.66GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 2038 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 31918 MB, Free - 6886 MB;
Motherboard: Dell Inc., 0KD882, , .9BZX1B1.CN4864365E7674.
Antivirus: Sunbelt VIPRE, Updated: Yes, On-Demand Scanner: Enabled

happens after a restart.
What is this and how do I fix it?
Thanks

3 more replies

Hello,

I keep getting the following message on my desktop after installing XP Service Pack 3:

C:\Progra~1\MYWEBS~1\bar\1.bin\M3Plugin.dll

I have gone through the five step process and have included the two logs as required below(Active Scan is first, then the HiJack). Please advise as to a solution to this issue. Thanks.

;***********************************************************************************************************************************************************************************
ANALYSIS: 2008-09-13 15:13:30
PROTECTIONS: 2
MALWARE: 80
SUSPECTS: 0
;***********************************************************************************************************************************************************************************
PROTECTIONS
Description Version Active Updated
;===================================================================================================================================================================================
Trend Micro PC-Cillin Internet Security 2007 15.00.1454 No Yes
Trend Micro Internet Security 2008 15.00.1454 No No
;===================================================================================================================================================================================
MALWARE

Hello

Double click on RSIT.exe to run the tool.
Click Continue at the disclaimer screen.
Once it has finished, two logs will open. Please post the contents of both log.txt (<<will be maximized) and info.txt (<<will be minimized)

**Please note that the forum is very busy. If there is no response from you within three days this thread will be closed.

5 more replies

I am currently taking a class and am required to ask a problem I am having with my computer. Evertime I log in, I receive an error loading message “error loading Crogra~3\rdoibdo7.dss” Can anyone provide a clue if this is huge problem or what caused it. I did have a virus that was taken care of 2 months ago. Thanks for any help you can provide

More replies

what does this message mean it comes on at start up....what do i do?

RUNDLL

The specified module could not be found

Hello spontaneous, Welcome to TSF!

This file is very strange indeed, which leads me to believe that you may have a spyware/malware infection on your computer.

Please read this article? "Having problems with spyware and pop-ups? - First Steps"; follow the instructions very carefully; then, post all the requested logs and information; as instructed, in the HiJackThis Log Help Forum.
(Simply, click on the coloured links to be re-directed.)

Please ensure that you create a new thread in the HiJackThis Log Help Forum; not back here in this one.

When carrying out The 5 Steps, if you cannot complete any of them for whatever reason, just continue on with the next one until they are all completed.
However,it is extremely important to make mention of the fact that you could not complete any of the steps in your post to The HJT Help Forum; where an Analyst will assist you with other workarounds.

Once done, please be patient, as the Security Team Analysts are usually very busy; one of them will answer your request as soon as they can.

Good Luck with it.

Kind Regards,

1 more replies

I am running windows vista home edition 32 bit.
When I start or reboot my computer I receive an error message stating "error loading c:\PROGRA~1\MYWEBS~1\bar\i.bin\M3PLUGIN.DLL specified module could not be found"
I have tried everything I know and am unable to remove this thing.
I have some basic knowledge in computers but not enough experience to fix this.
I have downloaded speed scan and other utility programs to speed up my compter and maybe this is what caused the problem. I have deleated all these programs.
Thanks

1 more replies

For a while I have been getting an error message on loading XP
In a box titled WLanCfgG I get a message: Load library Intersil.dll fail!
When I click OK XP it disapears and everything seems to work well.
This message started after I was trying two different USB network adaptors.

After a Windows update some time later I began to get the following two messages:
In a box titled WZCSLDR2.exe-Entry point not found there is the message:
The procedure entry point apsInitialize could not be found in the dynamic link libraary wlanapi.dll
The procedure entry point apsSearchInterface could not be located in the dynamic link library wlanapi.dll

After I click on the OK button for both of these messages, the messages disappear and XP runs fine.

The only problem I seem to have is that I cannot restore my computer to a previous restore point.

Both of those files appear to be associated with NIC drivers. Ensure you have a copy of your network card drivers available on your HDD or CD, then uninstall all references to the NIC drivers you installed or any listed in Add and Remove Programs. Then reboot, and reinstall only the drivers for the card you have installed.

1 more replies

Hello all, My computer was recently hijacked with Surfside and many other problems, I think I managed to fix most, but every time I start up I am getting the message: error.loading 0wso0fis.dll is there anyway to fix this without messing up anything else? Thanks

1 more replies

I was running a complete scan of my C drive with SUPERAntispyware that I have run every 4 weeks or so. When it finished it left this message:
RUN DLL
C:\PROGRAM~//MYWEB~|\BAR\2.BIN\MNSVAR~.DLL

The specified module could not be found

OK

When I restart I get this message everytime.

Solved!

2 more replies

I have an error loading sign when i start my pc it reads, C:\Windows\System32\ MSA64CHK.dll. The Specified module could not be found. it comes on there whenever i start up.When I go on line i get a message. about Critically wrong with your pc. but other than that it seems alright the server disconnects after a few hours sometimes :

That is a left over from a nastie that you must have fixed

SpywareBlaster http://www.javacoolsoftware.com/spywareblaster.html

DL them (they are free), install them, check each for their definition updates and then run AdAware and Spybot, fixing

anything they say.

Do these before the next step.

Then get HiJack This http://www.majorgeeks.com/download3155.html, put it in a permanent folder, run it , DO NOT fix

anything, post the log here.

1 more replies

I am using Windows 98 and AOL 6.0. Everything was working fine until one day I tried to load AOL, but I got an error message that said something like "could not load a file. AOL will attempt to restore the file." I was able to connect and use AOL, but when I got online I had a few problems. First, all of my favorites were gone in the favorites folder. I can no longer add favorites to the folder. Also, I couldn't use my download manager. Finally, when I click on "filing cabinet" in the mailbox window, I get a WAOL error.

I have no idea which file AOL was trying to restore. Does anyone know a solution to this problem?

uninstall and reinstall AOL.

1 more replies

Lately when I turn on my computer, while it is loading a window comes up that says "Error loading C:\WINDOWS\khecdc.dll The specified module could not be found". After it does this, there are certain programs I can't seem to launch. Occasionally when I start the computer the desktop will load without any of the programs on it or taskbar. I do Crtl Alt Delete to restore them. Then the error message does not appear and I can open up those programs that I could not before. Help!

Welcome to TSG....

http://www.trendsecure.com/portal/en-US/threat_analytics/HJTInstall.exe

Save the file to your desktop.
Double click on the HJTsetup.exe icon on your desktop.
By default it will install to C:\Program Files\HijackThis.
Continue to click Next in the setup dialog boxes until you get to the Select Additional Tasks dialog.
Put a check by Create a desktop icon then click Next again.
Continue to follow the rest of the prompts from there.
At the final dialog box click Finish and it will launch Hijack This.
Click on the Do a system scan and save a log file button. It will scan and then ask you to save the log.
Click Save to save the log file and then the log will open in notepad.
At the top of the Notepad HJT log screen, hit Edit then Select All then click Edit and then click Copy doing that copies the text to the clipboard, you won't see it yet....
DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required.
A security expert with a gold shield to the right of their name should take a look at your log - please be patient.

3 more replies

when i load up i get this C:\PROGRA~1\NEWDOT~3.DLL but I have afirewall and spysweeper in my pc and I sweep regularly also I looked on my pc to see if I have any newdot stuff a but found none can anyone help me get rid of this error? Please email me at [email protected] to help.

Thanks,
Anthony

7 more replies

I am running Windows XP home edition, and whenever I turn my computer on I get a Run DLL message, the message is:

Run DLL Error Loading C:\Progra~1\Newdot~2.Dll- This specific module could not be found.

If anyone knows how to fix this, or what it mean, ur help would be greatly appreciated.

Thanx Shannon

7 more replies

Hello I posted another log earlier but I don't think it was answered , but since then I have been getting an error message that says Error Loading C:\PROGA~1\mywebs~1\bar\1.bin\M3PLUGIN.DLL The specific module could not be found . This error has been coming up since I ran Spybot Search and Destroy , I tried to remove the errors and then I uninstalled it . Here is my hijack log Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:34:51, on 26/05/2008
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18000)
Boot mode: Normal

Running processes:
C:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Windows\RtHDVCpl.exe
C:\Acer\Empowering Technology\SysMonitor.exe
C:\Program Files\Acer Arcade Live\Acer HomeMedia Connect\Kernel\DMS\PCMMediaSharing.exe
C:\Program Files\Thomson\ST330\diagnostics\diagnostics.exe
C:\Program Files\Java\jre1.6.0_05\bin\jusched.exe
C:\Program Files\MyWebSearch\bar\1.bin\M3SRCHMN.EXE
C:\Program Files\MyWebSearch\bar\1.bin\MWSOEMON.EXE
C:\Windows\System32\rundll32.exe
C:\Program Files\Common Files\logishrd\LComMgr\Communications_Helper.exe
C:\Program Files\Logitech\QuickCam\Quickcam.exe
C:\Windows\ehome\ehtray.exe
C:\Program Files\Windows Live\Messenger\msnmsgr.exe

More replies

Every time i log on to my desktop i receive an error messagereading: [b]ERROR LOADING C:\WINDOWS\system32\jnjmfeo.dll[/b]What file is this? Why is this happening?Thanx-BF

3 more replies

Vista system restore attempt throwing "not enough space" status
Hi!

I'm unable to boot into the Windows GUI. When I power up the computer, the "Startup Repair" window stating "Your computer was unable to start" appears and attempts to correct the problem. After a few minutes, it reports that it cannot repair the computer automatically and presents me with a "System Recovery Options" window. Since the initial Startup Repair was unsuccessful, I'm choosing not to select that option again...so I thought the "System Restore" option would be the next best approach. When I try to perform the System Restore, I run into the following scenario . . . after I select my restore point and the restoring files activity is complete I recieve and error 0x80070070 and a message citing not enough space. My C: drive has 19Gb free so is the lack of space in a partition and if so how can I change it?

Any help would be greatly appreciated, and I'm more than happy to post additional information as required.

Thanks!

More replies

Symptoms: When you try to view any one of the following dialog boxes, the dialog box may appear to be empty or partly empty: Search Companion User Accounts Windows Update Help and Support System Restore When you try to start Microsoft Windows Media Player, you may receive an "An internal application error has occurred" (or a similar) error message.

Internet Explorer may not be able to print. When you click File, and then click Print, the Print dialog box does not appear. The print preview is blank.Cause:This issue may occur if one or more of the Jscript registry key settings are incorrect. This behavior may also occur if the Jscript.dll file is missing or damaged.Method 1: Reregister Jscript.dll and Vbscript.dll Click Start, and then click Run.

In the Open box, type regsvr32 jscript.dll, and then click OK.

Click OK.

Click Start, and then click Run.

In the Open box, type regsvr32 vbscript.dll, and then click OK.

Click OK.If either of the files do not register as expected, or if you receive an error message, the system file may be missing or damaged. To extract the missing file in Microsoft Windows XP, follow these steps: Click Start, and then click Run.

In the Open box, type msconfig, and then click OK.

Click Expand File.

In the File to restore box, type the name of the file that you want to restore.

In the Restore from box, type the path of the Windows XP .cab file where you want to restore the file, or
click Browse From ... Read more

A:How To Fix Windows Media Player Error - An Internal Application Error Has Occurred

i've tried both methods but nothing seems to work. i can't even uninstall the application or reinstall it.

5 more replies

Hello Friends,

I have reinstalled my Vista home premium 32bit OS, and now i am not able to install my vodaphone router software....during installation of software i get the error messges

Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.ATL,type="win32",version="8.0.50727.762",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"'. Please refer to Help and Support for more information. HRESULT: 0x800736B3. assembly interface: IAssemblyCacheItem, function: Commit, component: {97F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}

i have looked into even viewer and found...........error

Activation context generation failed for "C:\Program Files\Common Files\AccSys\AccVSSvc.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.762" could not be found. Please use sxstrace.exe for detailed diagnosis

sxstrace.exe could not give me much info.....

please suggest how to proceed...this is fresh installation, not sure if previous installation carrying .Net Framework...

thank you
SBE

A:Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.ATL,

Hello and welcome to the Vista Forums!

It is not .net Framework that you need, but the Visual C++ Runtimes, in particular the 2005 ones.

? Download and install the following VC++ Redistributables in the following order: 2005; 2005 SP1; 2008; 2008 SP1, 2010

Retry. That should solve the issue. If it does not, I shall teach you sxstrace.exe!

Richard

8 more replies

First my machine specs:

http://www.evga.com/community/ModsRi...asp?sysid=5160

Im using Windows 7 Ultimate x64.

Im having some issues with my computer freezing, this occurs while using a "patcher" to download content to a mmo game and sometimes while playing 3d games.

My event viewer has this all the time:

--------------------------------------------------------
A corrected hardware error has occurred.

Reported by component: Processor Core
Error Source: Corrected Machine Check
Error Type: Generic Cache Hierarchy Error
Processor ID: 0

The details view of this entry contains further information.
--------------------------------------------------------

[ Name] Microsoft-Windows-WHEA-Logger
[ Guid] {C26C4F3C-3F66-4E99-8F8A-39405CFED220}

EventID 19

Version 0

Level 3

Opcode 0

Keywords 0x8000000000000000

- TimeCreated

[ SystemTime] 2010-04-20T19:25:49.490400000Z

EventRecordID 5406

- Correlation

[ ActivityID] {954A60D4-EFE5-4F8B-B054-8D11A7E15C9D}

- Execution

[ ProcessID] 1488

Channel System

Computer blabla-PC

- Security

[ UserID] S-1-5-19

- EventData

ErrorSource 1
ApicId 0
MCABank 3
MciStat 0x9020010c0320100e
MciMisc 0x0
ErrorType 7
TransactionType 256
Participation 256
RequestType 256
MemorIO 256

A:A corrected hardware error has occurred, Generic Cache Hierarchy Error

Although you haven't mentioned any BSOD's, the info will provide us with some details so we can try to figure this out.

In general, a machine check is related to an error that's recognized by your CPU and reported to Windows. There's not usually much information in the error reports so we have to fiddle around trying to figure it out.

Most often these are either hardware problems (something's busted) or compatibility issues (either software or hardware).

1 more replies

The specified module couldn't be found.
I did delete it from the system when I saw that there was a non-removal Trojan involved.
Do I need to run MSconfig and remove what ever is left?

More replies

Hello

I am getting an error message on my laptop as soon as I start it up.

The error message says:

The file is possbily corrupt. The file header checksum does not match the computer checksum"

It does not give me any options to do anything. So when I restart the laptop, I still get the same message.

11 more replies

I am running Windows XP with Service Pack 3 and keep getting the following message once my desktop appears:

C:\Progra~1\MYWEBS~1\bar\1.bin\M3Plugin.dll

Please advise on how to eliminate this from popping up every time. Thanks.

Hi ufdu !

Obviously it's a remnant of MyWebSearch. If you haven't uninstalled MyWebSearch then uninstall it the proper way (use add/remove programs). Then use adaware or spybot to get rid of the remnants.

http://www.techsupportforum.com/secu...oval-help.html
Be sure to reach step 5 and post your HJT log with a summary of your issue in a new thread in the HijackThis Log Help section. Be patient since the security section is very busy.

1 more replies

I get this error message when Windows XP Home starts:

(It's in spanish so this is a rough translation)
SmartBridge Alerts: MotiveSB.exe - Can´t find point of entry
Can´t find the point of entry for GetProcessImageFileNameW in the dinamic link library PSAPI.DLL
Any ideas?

How to resolve the Smartbridge PSAPI.dll Error After Installing Internet Explorer 7
http://www.schrockinnovations.com/smartbridge_psapi_dll_error.php

3 more replies

Can anyone tell me what this error message means?
started getting this error message;

c:windows/system32/xrpdnthm.dll

Any help would be MUCH appreciated.

I am using Mozilla firefox as a browser, another family member uses Explorer for MSN instant messaging.

I am guessing it is related to running into serious problems with Virtumonde.

I have run Ad/aware and Spybot. They both keep removing it but it keeps showing up along with a lot of I suspect related spyware.

I've run McAfee Anti-Virus and it showed nothing. I ran Windows Defender and it showed nothing.

Ran Vundofix and it showed it removed it all but then when I re-ran it is was back there.

Also ran Virtumundobe gone in safe mode and it showed nothing but then there error message started appearing...I re-ran Spy-Bot and it is still showing Virtumunde on the system.

Any help would be much appreciated. I posted a hijack this log on the appropriate forum.

5 more replies

When I load my iTunes i receive an error message reading 'iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly' and when the iTunes screen does appear not music plays, the bar showing how long the songs been playing for doesn't even seem to move. I've tried uninstalling and installing iTunes a few times now and its still saying the same thing.

Hey. Sorry to hear about the problems your having with iTunes. Firstly, Id recommend downloading the Latest iTunes player available. Try installing that. If that doesn't resolve the problem then Try updating your Sound Card drivers :)

1 more replies

I have already requested help off this site and it helped me very well. So know im coming with a problem that has been bugging me for years. Every time i turn my computer on i get a message come up. It tells me that one of the direct library links has gone. So i am wondering if you can help me either get it back or stop it coming up

here is the message that pops up:

RUNDLL

C:/WINDOWS/System32/Spool/DRIVERS/W32x86/3/lxbstime.dll

I once went to get help from time but i learned they had finished. So know i come to you.

Could you please sort this out ASAP!
Thank You
Jacob
x

2 more replies

I receive this message consistently when my computer is on:

The specified module could not be found.

This is my Hijack Log:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 9:06:18 AM, on 7/24/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\SYSTEM32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\System32\svchost.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\Explorer.EXE
C:\Program Files\Alwil Software\Avast5\AvastSvc.exe
C:\Program Files\Gateway Utilities\GWInkMonitor.exe
C:\WINNT\system32\spoolsv.exe
C:\Program Files\ScanSoft\PaperPort\pptd40nt.exe
C:\Program Files\Common Files\Java\Java Update\jusched.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\PROGRA~1\ALWILS~1\Avast5\avastUI.exe
C:\WINNT\system32\ctfmon.exe
C:\Program Files\Nikon\PictureProject\NkbMonitor.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\WINNT\System32\svchost.exe
C:\Program Files\iPod\bin\iPodService.exe

13 more replies

Good day all,

This is my first post from a new UK user.

I am running Windows XP Pro and have been troubled by NAIL.EXE. I think I have successfully removed it to quarantine using EWIDO. Now on starting Windows I am presented with an error message "Windows cannot find 'C:WINDOWSNAIL.EXE'. Make sure you have typed the name correctly ...(etc)".

Now this is not nearly as problematic as the NAIL.EXE effect but it is an irritation. Can you advise what I need to do to stop the call to NAIL.EXE.

Thorntonman

NAIL.EXE and AURORA.EXE are recent and nefarious spyware from Direct Revenue, Inc. Arm yourself with another anti-malware application like Adaware or Spybot Search and Destroy and feel better!

EDIT: whoops, it appears you're over the virus and just have a residual message regarding it.

First things first; see if it is in your 'Startup' folder. Start > Programs > Startup... look for the call to it there.

Failing that, see if it stands out from among the programs listed under Start > Run > msconfig (typed in the Run box, then click 'Ok'). Msconfig has a tab for services launched at startup... you should find the offender by the path it's calling if not by name.

EDIT2: In fact, you may want to repost your issue in the HJT (hijack this) log forum; they will know better than I (at least off the top of my head) how best to permenantly remove that annoying call to NAIL.EXE.

2 more replies

Nevermind...I ran Malwarebytes AM..It's all good...

More replies

I am getting 2 different messages at startup - "Error loading C\windows\tipe10ay.dll Specified module could not be
found" and same for "bfky.ojo" module. I think I amy have picked up a virus from the USPS spam thats going around.
What should I do?

3 more replies

When I start up computer, the following appears:
RUNDLL X

the specified module could not be found
OK
I click on the OK or close button and I go on my way. Computer works fine but this error message comes up every time I turn on the computer. Thanks for your help.

The E6F1873B.DLL is malicious
It is BrowserAid/Startium parasite related
See here:

http://www.bleepingcomputer.com/startups/E6F1873B.DLL-9088.html

---------------

Go to add/remove and see if Browser Aid is there, if so uninstall it.

============

HijackThis
*Unzip the file and install it to C:/ProgramFiles
*Click on scan and save a log
*When the txt file comes up, copy all and paste here.

David

1 more replies

I am doing a clean install of XP Pro on a Dell Dimension 8200 PC. The drive has been formatted and I am using the XP Pro setup disk. About halfway through setup I get an error message that says "setupreg.hiv cannot be loaded. error message 4111."

The setup disks were downloaded from Microsoft. I've tried booting from the XP CD (OEM version), but can't seem to get it to work. I have changed my boot sequence to boot from CD, but no go, so back to using the setup disks.

I have searched the net for days and have found nothing. Anyone here know anything about this? Also, should I be using a XP bootdisk instead of the startup disks?

Thanks,
teejo

terrij123,

I am assuming it is set as slave, should be listed in first setup (bios)screen.
Is this the Boot Disk you are using?

2 more replies

Most of the time I can load games, but then I get error messages like:-
Error Access violation at 0x77F3F39E Tried to write to (0x00130000) program terminated.
This seems to happen on games like Hidden Mission Titanic and Everest, Ravensbridge and Huntsville. I am running microsoft windows 2000 XP. Can you help me sort it out?
Annieray.

Annieray said:

Most of the time I can load games, but then I get error messages like:-
Error Access violation at 0x77F3F39E Tried to write to (0x00130000) program terminated.
This seems to happen on games like Hidden Mission Titanic and Everest, Ravensbridge and Huntsville. I am running microsoft windows 2000 XP. Can you help me sort it out?
Annieray.Click to expand...

Are you running Windows 2000 or Windows XP? They are two different operating systems.

For error massages we would need the exact eror message if you could either write it down or take a digital picture of it and then post it this would be most helpful.

From what you have posted so far I would think this might be a memory problem so if you could please psot some system specs on the computer?

2 more replies

When i make send/ receive i can send message from my outbox but for received e-mails i receive the following message "An unknown error has occurred. Account: 'pop.secureserver.net', Server: 'pop.secureserver.net', Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x800C0133

A:OutlooAn unknown error has occurred. Accountk Express Error

This worked for someone else:http://www.emailquestions.com/outlook-express/2259-outlook-express-error-0x800c0133-corrupted-inbox-file.htmlhttp://sdfox7.com

2 more replies

i just installed google chrome from online installer and then i moved the file using application mover to the HDD.. then i pasted a symlink in "C:\Program Files (x86)\" ... "C:\" is the SSD where the windows and the drivers are installed.... when i turn on chrome everything works file.. but the updater doesn't work... when i try to update i get this:

can anyone help me get that fixed.. thanks!

A:Update failed (error: 3)An error occurred while checking for updates:

Just uninstall Chrome then install it directly to the destination you want it installed instead of moving it post installation.

3 more replies

I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error:
I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.

Any ideas on how to fix this problem?

A:DirectX install error - An internal system error occurred.

Welcome to Seven Forums callumshell1. The 1st thing I would suggest would be to run the System Files Checker.

SFC /SCANNOW Command - System File Checker

See if it finds and corrects any errors. Also, see if you locate the 2 dx logs mentioned, in the windows directory, and post them here, or just the text if they are short, which they may well be.

A Guy

6 more replies

While trying to start up my Dell laptop with Vista Home Basic installed on it, I got an error saying that the winload.exe is missing. I ran the bcdedit commands to set the osdevice and device partitions. While trying to boot again, got an error again this time saying that Kernel is missing or corrupt. I tried to run a repair using the Vista installation cd but the repair failed midway. I tried to do a clean reinstall on the machine which completed successfully. But when I tried to boot the machine again, it gave an error 0xc00000e9 unexpected error has occurred with no other options. Running repair and reinstallation again did not work. I see that a lot of people have faced this problem but I could not find any solution which would work for me. Any clue about how to solve this and what is the cause of this problem? It has been really frustrating till now

A:Vista error while booting: 0xc00000e9 unexpected error has occurred

Hello IamThe,
If the E9 code is correct, then this is the bugcheck for your error.

Usual causes: Device driver

As you can see, the most probable cause is a driver.

Have you tried to boot into safe mode ?.
If you can get to safe mode with networking, go to C > Windows > Minidump and upload the files. You may need to save them to desktop before you zip them up and upload them.

Take a look and post your results, good luck.

6 more replies

Need some help.
When pc boots up I get this error message c:\winnt\system32\autoexec.nt. The system file is not suitable for running ms-dos and microsoft windows applications. Windows 2000, SP3

Things that I have tried were the knowledge base from microsoft

http://support.microsoft.com/default.aspx?scid=kb;EN-US;305521
Windows Update
Trying to remove things from start up.

Can't figure out how to remove this error or fix it. Any ideas?

1 more replies

Hi...I am new to this site and probably know the least about computers than anyone posting. I do have a problem that occurs each time I turn on the computer or reboot the computer. When windows is coming on I get an error message that says - "windows can't find c:\windows\system32\ddabx.exe could not load or run"

I then click okay and it tells me a second error that says - "error loading c:\windows\system32\sxtcqpwg.dll the specified module could not be found".

I then click okay and it tells me a third error that says - "error loading c:\programfiles\vcrspgvi\mnotmvq.dll the specified module could not be found".

If I click okay, I do not get any more error messages and windows seems to work, but I have notice that I can't access any website that need adobe flash. I have uninstalled it and reinstalled it, but it does not work on my computer.

I do not know if these are all separate problems and I should be posting them separate, or if they all go together. I hope someone can help me because I have no clue what to o and I do not understand how computers work. I do know that we have something called AVG 7.5 internet security.

Please let me know if you can help. Also, if I need to do that hijack log thing, you will have to tell me how. I have just been noticing that a lot of people have copied logs and I don't know how to do that if needed.

These appear to be leftovers from a virus infection that's been removed from your computer.To get rid of them, use this free tool: http://www.microsoft.com/technet/sysintern...s/Autoruns.mspxLook under the "Everything" tab for image names that have those filenames mentioned above:ddabx.exe sxtcqpwg.dllmnotmvq.dll Once you find them (it's a long, long list), remove the check mark to the left side of the window that corresponds to the line that the files are on. Then reboot to see if the error messages are gone.

6 more replies

Hi,

When I insert disk one to load FSX onto my new computer with Vista I get the following error message
E:\is not a valid Win32 application.

Can someone help me with this so I can load FSX.
Cheers and thanks

Hi

I've had a good look round about this, and your not alone, quite a few people have the same problem, that said, and I am assuming you can't install it?

If that is the case try this first

Put the CD in and open My Computer, right click the CD Drive and choose open, then find the setup exe and right click it and choose run as administrator

Hope this helps you, if not we'll try something else, in either case post back

3 more replies

After running adaware with XP Home I always get the following error message everytime I reboot

RUNDLL
The Specified Module Could Not Be Found

I click ok on it and everything seems to run fine, I'm just wondering why and or how I can get rid of it and to have it stop occurring everytime I reboot
Any suggestions would be greatly appreciated.

Thanks Warren Peace!

6 more replies

HI everyone,

I have Windows Vista on my laptop which is using an AMD64 Athlon chip.

I have all updates installed from Microsoft, and I have the most recent release from Sun, of Java.

To connect to my wrk computer, when away from the office I use a secure tunnel, which part of the process is to load up a secure tunnel which is a Java applett.

When I click on the link to start this however I get the following error message, and the secure tunnell will not load, thus meaning I cant start my secure remote desktop connection.
Copyright (C) 2004, 2005, 2006, 2007 Cisco Systems, Inc.
Version 1.79 6/13/2007
------------
Error reading localization: java.net.SocketException: Unconnected sockets not implemented
at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(Unknown Source) at java.lang.ClassLoader.loadLibrary(Unknown Source) at java.lang.Runtime.load0(Unknown Source) at java.lang.System.load(Unknown Source) at WebVpnPortForward.getWebVpnDll(WebVpnPortForward.java:968) at WebVpnPortForward.start(WebVpnPortForward.java:431) at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
I have taken out the name of the .dll filename above just as it has reference to w... Read more

8 more replies

The error message is displayed at start-up ERROR LOADING AUNPS2.DLL at start-up. It showed up after I removed some unwanted programs. How do I clear this message?

You could go to: Start -> run -> type: msconfig -> startup

Look for the file in there, and uncheck it. This may be spyware though... so you may want to put a HJT log in here. I didn't research your file at all though, so i can't say for sure.
-blitze

EDIT:
I would highly suggest using hijackthis and posting a log

1 more replies

I had a problem with antivir solution pro. So I removed it by running iExplore, then unchecking the "use proxy server" in the LAN settings in my Internet explorer, then running Malwarebytes Anti-Malware and SuperAntiSpyware.

Now, when I start my computer, a few seconds after logging in a message pops up saying "Error loading phdyp.dll The specified module could not be found. A second or two after this happens, my symantec pops up saying that the quickscan detected something. The symantec results say that the risk is called Trojan.Zefarch that the count is 2, and that the filename is axoniqeribe.dll.

After it is quarantined and I restart the system, it's back. How do I get rid of this?

BC Removal Guide, http://www.bleepingcomputer.com/virus-remo...ir-solution-pro.Try the above...if no joy, follow the instrucitons listed at the end of the guide...and post at BC Virus, Trojan, Spyware, and Malware Removal Logs - http://www.bleepingcomputer.com/forums/f/22/virus-trojan-spyware-and-malware-removal-logs/.Louis

1 more replies

I have posted this once already and I will close my other post, I am thinking maybe I did not give enough information because I have received no replies.

Here is my original post

I purchased some CD-roms NIB and tried to install them today, when I first tried it, it worked on disk one then I thought maybe I needed to sign on under the other user of my comuter since that person is the one that wanted these CD's installed so I unistalled the first CD and logged off my name and then on under my husbands name (same computer). When I tried to then install them, it would not let me it kept telling me that the uninstall was still active. I restored my computer to yesterday so I could start over from scratch and now I get an error message #112 that states Unable to decompres files call your software provider. Can you tell me what is going on? Thanks

Now, I have attached the error message that I am getting when I try to load the CD's. I had someone suggest that my temp folder was too full, I emptied it and I still get the same error message plus now I get two more- they are both attached. Thanks for any help you can give me.

The attachments won't attache maybe too large I will follow with the error messages.

Error 1 - SETUP in the NTVDM CPU has encountered an illegal instruction CS:BEDO IP:F54f op:62ff of 1062 choose close to terminate the application.

Error 2 ISSET_SE caused a general protection fault in module KRNL.386.exe at 0001:2386.

Im clutching at straws here really but going back to your original message it says unable to decompress....did you try using Winzip? to decompress .....

2 more replies

I am trying to install windows 7 on an Dell Vostro 400 with XP OS.

Setup times out during following prompt: "Setup is copying temporary files"

Error message: "Windows setup experienced an unexpected error 0x6"

This is usually caused by either
1) problems with the hard drive - run CHKDSK /F to check it
or