Tech Problem Aggregator

Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

Q: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source of the duration field problem. But after I had such a great success on this forum with my hard disk problem here, I decided to try to get help here.

Thanks in advance for any suggestions.

A: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Answer Match 332.1%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 224.1%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Answer Match 215.4%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Answer Match 214.8%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Answer Match 213.9%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Answer Match 212.4%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Answer Match 212.4%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Answer Match 212.4%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Answer Match 210.3%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Answer Match 209.4%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Answer Match 207%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Answer Match 207%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Answer Match 207%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Answer Match 207%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Answer Match 204.6%

Hi TechGuy,

I'm having some recent problems on my laptop. When I log-in and start using it, the performance starts slowing down. When I look at the Task Manager, I notice that the task called Explorer.exe takes up a lot of my CPU. In a couple of minutes, I also start getting Internet Explorer windows to pop-up on my screen (I normally use Firefox) with advertisements suggesting that my computer is infected and some software downloads that could help. I recently installed McAfee Total Works, or whatever they call their 10-in-1 software which is supposed to do it all. I ran several scans, and on some of them, if did find and disable the Generic.dx trojan. Even though it claims it is doing something, I don't notice any changes - Explorer.exe continues to bog me down, and the IE windows keep popping up to the point that I cannot use my computer effectively anymore.

IBM T-40 laptop (about three and a half years old)
Microsoft XP-Professional

Any pointers would be truly appreciated!!

Thanks,
Sandjosh
 

A:Solved: "Explorer.exe" process keeps running, IE Windows intermittently open, "Generic.dx"

16 more replies
Answer Match 204.6%

I have been plagued for years by this bug (see attached Mad_Explorer_col.JPG screen dump), and this morning after visiting Tech Support Guy > Windows XP then searching for "Windows Explorer", on page 2 in "Solved: Explorer tree display curiosity, AKA Odd Windows Explorer Bug", page 2, I found the cause and solution brought by Mosaic1 Wed 07 Mar 2007 05:48 GMT:
Do you have the desktop toolbar on the taskbar?​and mrwes Tue 07 Aug 2007 18:34 GMT:
You can get around this by making the toolbar point to the Desktop but using c:\Documents and Settings > (Profile name) > Desktop. You don't see the My Computer and IE icons in the list, but everything else shows up...​Thanks a lot to Mosaic1 and mrwes!

Versailles, Sat 13 Feb 2010 10:34:25 +0100
 

More replies
Answer Match 202.5%

"dependency chain" "windows 7" internet "windows explorer"

At the time of this writing, this search in Google will produce one result at best. Am I searching the wrong things? I have tried a couple handfuls of variants, and I am coming up with zilch.

Though I am fairly well versed in Windows 7 from working on other people's machines, I decided to stick with good old XP because of one issue above all else. When I instructed my firewall to block Windows Explorer from accessing the Internet it completely cut me off from the Internet, no ifs, ands or buts. My understanding of why this is happened leads me to believe the dependency chain for Internet access goes through Windows Explorer. I have long had a habit of blocking my File Manager of choice access to the Internet because... well, it's a file manager! Admittedly, my one experience with Windows 7 on my own machine was a retired student version of Server 2008 R2, but as soon as I found out that was the case, I decided not to make the move to Windows 7 and went back to my XP installation. I believe I was using Sunbelt Personal Firewall at the time. I now use PCTools Free Firewall.

Is this still the case with Windows 7? Is there a workaround if it is?

I haven't tried to recreate this on another person's machine.

+KronKyrios

A:"dependency chain" "windows 7" internet "windows explorer"

Hi KronKyrios, welcome to 7F!

I did find some very old information that may shed some light:
http://www.pctools.com/forum/showthread.php?17198-explorer.exe-(W98)&p=58079#post58079

"Launch Browser Windows in a Separate Process" Setting Is Not Available in Internet Explorer 5.01 or Internet Explorer 5.5

You can go into Services and check:
Windows Firewall/Internet Connection Sharing (ICS)
Network Connections
Remote Procedure Call (RPC)
Windows Management Instrumentation

R-click on each one, then Properties, then the Dependencies Tab.
You would have to cross check each one that is listed.

Here is a good list to help you: Black Viper’s Windows 7 Service Pack 1 Service Configurations

6 more replies
Answer Match 202.5%

I tried to associate the file extension .txt to a new editor program
with the well known cmdline programs ASSOC and FTYPE.

No, assigning them through WinExplorer menu does not work.
But this is another problem which should not discussed here.

When I type now one of the following alternative commands at the CommandPrompt then Win7 returns me something like:

assoc .txt=txtfile

"Access denied"
The following error occurs: .txt"

or

ftype txtfile=D:\notepad++\notepad++.exe "%%1"

"Access denied"
The following error occurs: txtfile"

Why?

The command above work fine under WinXP

Peter

A:"access denied" when using "assoc" and "ftype" from cmdline?

Question:

Did you run cmd.exe with administrative previlliges?
Elevated Command Prompt

3 more replies
Answer Match 202.5%

hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane

A:Remaking "My Music", "My Pictures", "My Videos" folders

  
Quote: Originally Posted by Legume


hi,

OK, this is a weird one.

I wanted to move the "My Music", "My Pictures", "My Videos" folders to another HDD. I moved the "My Documents" Folder to this HDD without a problem but the others I accidentally set the whole HDD as the folder (if that makes sense). So now the music, videos and pictures folders are set to this HDD and dont have an actual folder to change the properties of. Therein lies my dilema.

If anyone can offer any advice on this curly issue it would be greatly appreciated.

Shane


You have a backup from before the problem started? a win 7 dvd to do a repair install?
ken

4 more replies
Answer Match 202.5%

Hi:

Looking for insight/advice re: KB3054476.

According to Infoworld, it was "Optional" in May, but I was not offered it then.
This week, it was offered as "Important" and "Recommended" (!), but only for one of my 2 Win7/64 boxes.

I have read the MS KB article, as well as THIS FORUM THREAD, the latter of which includes a report of a BSOD due to this particular update.

However, there isn't much out on the web about it.
And most of the discussion about it is overly technical for me.
And I am confused as to why it was previously offered as "Optional", but now is "Important" or "Recommended".

I don't *think* I "need" it (as I have no webcam on this box). And I don't like to tempt fate by fixing things that are not broken.

So, 3 questions:
Is it safe to install?
Is it really necessary/important?
Or would I be OK to hide it?
Thanks very much in advance!

A:KB3054476 offered as "Important"/"Recommended"/"Optional"

The status of updates changes with circumstances.
If an update isn't relevant, it won't be offered at all.
If however it's relevant but the related software is not apparently in use, it may be 'optional' - and gravitate to 'Recommended' or 'Important' if the related software is in use.
It can also be promoted through the hierarchy by MS depending on feedback through WU and error-trapped feedback.


If you have (and use) a webcam, then it's probably best to install the update.

4 more replies
Answer Match 202.5%

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

A:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

1 more replies
Answer Match 202.5%

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

A:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

1 more replies
Answer Match 202.5%

OK.....
As I said I am new.....
Hope this info is the way you need it.
MANY MANY THANKS IN ADVANCE FOR THE TIME & HELP !!!
Check out the following .....HHEELLLPPP


Logfile of HijackThis v1.98.2
Scan saved at 12:38:36 PM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\logonui.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dellnet.com
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Micro... Read more

A:NEW THREAD / "xads", "xlime", "Context3.kanoodle"

hi

how to create a folder ?

right click anywhere in your desktop
click new,a tab opens ,click folder ,name it hjtantivirus .

download again hijackthis and install it in the new created folder .

your hjt is here now
C:\Documents and Settings\Frank M. Gazzo\Local Settings\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

it will not work properly if it stays there .

and don t create a new thread ,keep only one thread .this one ,now .

1 more replies
Answer Match 201.9%

First things first, thanks to all who can help.....





I need to programmatically make some adjustments to the Internet Explorer security settings. Most of these settings I have found but there are a few I have not been able to get a clear exact location for in the registry. I will be using a .BAT file to make
the adjustments on 100+ PCs.





Here is what I am looking for.....





Under the "Internet  Properties" found in control panel, under the "Privacy" tab there is an "Advanced" option button. When I click on it I get an "Advance Privacy Settings" options box. On it are several settings.
The first setting, "Override automatic cookie handling" needs to be checked in order to access the other options. I can do that by adjusting the DWord value of "PrivacyAdvanced" under the "Internet Settings" key in the registry,
"HKCU\Software\Microsoft\Windows\CurrentVersion\Internet settings", to be specific.





What I have not been able to find are the registry entries for the "First-party Cookies" "Accept, Block, or Prompt" options, the "Third-party Cookies" "Accept, Block, or Prompt" options, and the "Always allow
session cookies" check box. Please see picture below....















I have seen references to the following settings as being where those options exist, but nothing that explains ... Read more

More replies
Answer Match 201%

I am running Windows 10 Professional 64 bit. Whenever I set the option "Turn off the display" to "Never", it reverts back to the default "15 minutes". This is under the "High Performance" profile. I have never, since Windows 3.11, ever had a setting change itself back. I have tried to change it and restart. It will either revert upon restart or shortly after. It will revert back even if I do not restart.

A:Power Option for "Turning off display" remains at "15 minutes"

That sounds like my problem - I leave the computer for an hour and it is shut down (I think sleep mode). I just need to hit the power button and it comes on to where it was when I left - but 2 of my USB devices are lost so I have to restart the computer anyway.

I changed all the power settings to NEVER. But his doesn't seem to make any difference......

0 more replies
Answer Match 200.7%

hi. i'm new here. nice to meet all of you!
just like a lot of folks i'm sure, i've come here because there are some weird things running on my pc that shouldnt be in there.
please help!!!!!!

heres the hijack log
(thanks in advance. i don't know much about this computer virus stuff.)
~eric

Logfile of HijackThis v1.99.1
Scan saved at 10:06:40 AM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Dantz\Retrospect\retrorun.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\SYSTEM32\qttask.exe
C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\PROGRA~1\VERIZO~1\HELPSU~1\VERIZO~1.EXE
C:\PROGRA~1\VERIZO~1\HELPSU~1\SMARTB~1\MotiveSB.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\PROGRA~1\Sony\SONICS~1\SsAAD.exe
C:\Program Files\Common Files\Verizon Online\ConnMgr\cmisrv.exe
C:\Program Files\Windows Media Components\Encoder\Wmencagt.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\ZoneLabs\isafe.exe
C:\Program Files\Common Files\Verizon Online\AppMgr\vz... Read more

A:"windows no disk" and "winsilly" "win956temp"

11 more replies
Answer Match 198.9%

I have searched to see if this was asked before without any success. Maybe someone has run into this problem before.
When I open "my computer" or "control panel" after I close it...it automatically goes into Internet Explorer as a blank page. Most of the time, when I close the IE blank page...it stops responding and I have the control-alt-delete to "end the program"
Thanks in advance for any help.
 

A:closing "my computer" or "Control Panel" open internet explorer window

Possibly malware - anything openning ie on its own raises an alarm in my books. Post a HJT log to the malware removal section of the forum and let the experts take a look at it
 

3 more replies
Answer Match 198%

About one month ago, a new problem surfaced:

Most times when I try to "Save As" a document and the application calls Windows Explorer for me to Browse where to save the file, it hangs for upwards of 60 seconds. The Browse window appears, but then I get a "spinning circular cursor" for 45-60 seconds until I can do anything. This occurs in all applications from MSExcel through Internet Explorer.

The system never completely crashes, but there is always this 60 second lag now.

The lag also occurs when I try to open a document...and to a less extent, but sometimes, when I simply open Windows Explorer (Windows Explorer is inconsistent as to whether it will give me a lag...sometimes it does work fine).

I have previously tried posting in the malware forum. I had picked something up they found...and cleaned it out, but that seems to have been completely unrelated to this as it was a virus redirecting my Google searches.

Can anyone help?
 

More replies
Answer Match 198%

Looking for some help. My wife's toshiba satellite laptop takes forever searching when you try to access My Computer or Windows Explorer. This happens from the desktop icon or thru the start menu. It seems to be searching for something that isn't there.

She is running XP Home OEM edition. Version 2002. computer has Celeron M processor 1.2 GB of ram. Being used for surfing, digital camera picture downloading, itunes, MS Office stuff. there is alot of Toshiba stuff in the add/delete list. not sure what is necessary and what isn't.

Thanks.

PS checked MS database. it said to go into Adminstrator services and stop WIA. I checked this and it is already stopped on this computer.
 

More replies
Answer Match 198%

Today I tried to burn a disk of mp3 files as I've done many times before. When I tried to copy the files from the C drive to the D (CD/DVD drive), Windows Explorer only would allow "Move," not "Copy". I tried to copy with CTRL+Right Click and that didn't work either - when I hover over the icon for the D drive it says "Move."

I was able to copy and burn a disk (in CD format) with Windows Media Player, and the CD drive works fine for playback. Also, when I plug in an external hard drive Windows Explorer allows copy of files to the external hard drive.

It's only when I try to copy files to the CD drive that I encounter this problem.

No other recent changes have been made to the computer.

Any idea, and thanks very much!

A:Windows Explorer only allows "Move", not "Copy" to CD/DVD drive

try selecting the files--then right click and select 'SEND TO' CD/DVD--it shouldn't be possible to 'copy' to a blank CD/DVD as it will be unformatted.

'send to' the choose burn

4 more replies
Answer Match 197.7%

Does anybody know how I can change these icons?

I changed the default icon for the network one in HKEY_CLASSES_ROOT\CLSID\{F02C1A0D-BE21-4350-88B0-7367FC96EF3C} but it didn't change.
Appreciate any help,

B

A:Changing "Computer" and "Network" icons in explorer navigation pane

Hello, and welcome to Seven Forums.

If you like, you could use the method in the tutorial below to change the icon of "Computer" and "Network" to what you like, and have it applied everywhere in Windows.

Desktop Icons - Change or Restore Default Icon

3 more replies
Answer Match 197.7%

Hello everyone
I have this problem for more than 3 months for now...

The INSTRUCTION AT "0x00a96ce0"referenced memory at "000000000" couldn't be written".

That's always what i get when i restart my computer,just before screen goes dark.
I believe that it has to do something with Microsoft updates.The reason i believe this, is that i once reinstalled my PC and didn't have any problem until i didn't update my PC.
And i posted here that thinking my problem was solved but unfortunately i was wrong.

Please if you have any tips on this one let me know it would be greatly appreciated.

Thank you!
 

More replies
Answer Match 197.7%

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

A:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

1 more replies
Answer Match 195.6%

Had posted this 08/21/07. No Reposes at all. So I'm going to try here.
http://forums.techguy.org/windows-nt-2000-xp/612963-w2k-explorer-exe-entry-point.html

Was working fine, then something went wrong. COX Secuity Suite blurped it caught a Trojan (didn't catch name). It had blocked it, but couldn't remove it. Explorer will no longer load.

ERROR MESSAGE:
Explorer.exe - Entry Point Not Found
(X) The procedure entry point PrintWindow could not be lcoated in the dynamic link library USER32.dll.
[OK]Click to expand...

I looked in the subdir and found explorer.exe was gone. I pulled a copy of explorer.exe from the old C: (now D, but I get the same error message.

I can muddle around with TaskMgr, but I no longer have my display for desktop or menu bar (i.e., Start and such).

This is my most current HiJackThis Log:
Logfile of HijackThis v1.99.1
Scan saved at 11:32:13 PM, on 9/18/2007
Platform: Windows 2000 SP4 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\System32\svchost.exe
C:\WINNT\system32\spoolsv.exe
C:\Program Files\Cox\Applications\app\SysSvcNt.exe
C:\Program Files\Common Files\Authentium\AntiVirus\dvpapi.exe
C:\Program Files\Ahead\InCD\InCDsrv.exe
C:\WINNT\system32\nvsvc32.exe
C:\PROGRA~1\Dantz\RETROS~1\wdsvc.exe
C:\WINNT\system32\MSTask.exe
C:\WINNT\System3... Read more

A:W2K: "ljjjjij.dll" causing "Explorer.exe - Entry Point Not Found"

9 more replies
Answer Match 195.6%

My problem started 08/21/07 and I've been hoping someone could look at this. I apparently caught a Trojan and can't get rid of it.

This trojan has screwed up my explorer file. I'm unable to get a display of my DeskTop (blue screen only). Reduced to using TaskMgr to run iexplore to access internet and navigate. Ran explorer and received the following error:

explorer.exe - Entry Point Not Found

(X) The procedure entry point PrintWindow cound not be located in the dynamic link library USER32.dll.

[OK] Click to expand...

I can muddle around with TaskMgr, but I no longer have my display for desktop or menu bar (i.e., Start and such).

Had a security 'expert' instruct me to rename my USER32.DLL to USER32.OLD which hosed my computer (could not boot up). Had to find my OS disk to get back in and rename the file back so I can get back to where I was.
Here is my HiJackThis log:
-----------------------------
Logfile of HijackThis v1.99.1
Scan saved at 1:09:55 AM, on 9/11/2007
Platform: Windows 2000 SP4 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\System32\svchost.exe
C:\WINNT\system32\spoolsv.exe
C:\Program Files\Cox\Applications\app\SysSvcNt.exe
C:\Program Files\Common Files\Authentium\AntiVirus\dvpapi.exe
C:\Program Files\Ahead\InCD\InCDsrv.exe
C:\WINNT\... Read more

More replies
Answer Match 195.6%

OK...
I'm looking for some help getting rid of theses creeps!
I have tried several programs including Spybot, Spyblaster, Lavasoft, Mcafee, etc. etc. with no luck.
I'm new to HijackThis but here we go..... ]

Logfile of HijackThis v1.97.7
Scan saved at 11:59:09 AM, on 11/12/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)SIZE=5]

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\WINDOWS\System32\Promon.exe
c:\program files\mcafee.com\agent\mcagent.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\interMute\AdSubtract\AdSub.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\WINDOWS\System32\NMSSvc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\PROGRA~1\VCOM\Fix-It\mxtask.exe
C:\Program Files\McAfee.com\VSO\mcshield.exe
C:\WINDOWS\System32\wuauclt.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE
G:\HijackThis.exe
G:\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://websearch.drsnsrch.com/sidesearch.cgi?id=
R1 - HKCU\Software\Mi... Read more

A:(I'm new here) help w/ "xads", "xlime", "Context3.kanoodle"

hi pdx

please download the new hijackthis from here
http://www.majorgeeks.com/download3155.html


and install it in it s own folder like this :

C:\hjtantivirus\hijackthis.exe

scan again with the new hjt and post a new log .

1 more replies
Answer Match 195.6%

Hi - I have a thinkpad x61t. When it's in the docking station, whenever I press "shift" "alt" or "ctrl" a little pop up window tells me that key is being pressed. The laptop does not do this when it's out of the docking station. I've looked all over the control panel in vista and can't find any setting.

Any ideas how to switch it off? Driving me nuts! Thanks.
 

A:"shift", "alt", "ctrl" appear onscreen when pressed (see pic)

You mentioned that you have looked in the Control Panel so this may be something you tried already:

Control Panel - Ease of Access Center - Make the keyboard eaiser use - uncheck 'Turn on sticky keys'.
 

2 more replies
Answer Match 195.6%

One feature I really liked in XP was the ability to look in a folder through My Computer and sort the files by extension. For example if I wanted to get all .jpg files to one side of the folder as I looked for a file, I could click View, Arrange Icons By, Type and make that happen. I don't see that feature in Windows 7. I'm using W7Pro and can't find that or a similar feature anywhere. Is it here and I just haven't found it? TIA

A:Where is "VIEW", "ARRANGE ICONS BY", "TYPE"

open a window ,click organise/layout /menubar.
then when you click view in the menu bar group by is in the list

3 more replies
Answer Match 195.6%

Hey everyone,

Unfortunately, my computer has been infected with a particularly virulent, or relatively new, virus (for which I am currently awaiting help on the Malware removal sub-forum). I wanted to ask, though, if anyone else has had to deal with this particular Trojan before because, from what I have been able to find out, it (i.e. Trojan_Win32.Generic, or "TidyNetwork.com") doesn't seem to have a remedy as of yet. I've checked just about every virus database I could and have come up empty handed every time. What's more, I've downloaded and ran half a dozen different top-shelf Anti-virus' scans and removal programs, only to end up disappointed.

Does anyone know what the deal with this thing is?

Best,

John
 

A:"Trojan_Win32.Generic" a.k.a. "TidyNetwork.com" & "Strongvault"

Please do not start another thread for the same issue.

I'm sure someone will be along to help you in your other thread soon.

Closing duplicate.
 

1 more replies
Answer Match 195.6%

Hey guys. This morning I got a really strange error code. When I tryed to update Steam on my PC, this error message popped up;

"The instruction at "0x00172058" referenced memory at "0x00d1004". The memory could not be "read".

Click OK to terminate the program.

Lately, I have'nt been able to install WoW either, I install it all the way to 100% and then when I try to launch it, I obviously have to re-download all the patches but it prompts me that I have to install it again, even though it is all there.

Tryed downloading the full game digitally off of wow-europe.com too, I click run to get it started, nothing happens and then this message pops up.

"The instruction at "0x00182058" referenced memory at "0x0f070014". The memory could not be "read".

Click OK to terminate the program.

I don't know what's up with it. My freind told me to run a CHKDSK /R to see if there was anything wrong with my drive and it ran smoothly, although I must say it took about an hour or so.

So, that was complete, tryed to do it again and I still kept getting these error messages. But I saw something on my desktop that wasn't there previously. It is an error log. Here is the error log;
#
# An unexpected error has been detected by Java Runtime Environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d5ecb6d, pid=1584, tid=1248
#
# Java VM: Java HotSpot(TM) Client VM (11.0-b16 mixed mode, sharing wi... Read more

More replies
Answer Match 195.6%

How do I change the font of "Welcome", "Logging Off" and "Shutting down"? Is it hard coded in a uifile? Which file are the words in? Is the file written in XML?? John

A:Change font of "Welcome", "Logging Off" and "Shutting down"?

  
Quote: Originally Posted by RBCC


How do I change the font of "Welcome", "Logging Off" and "Shutting down"? Is it hard coded in a uifile? Which file are the words in? Is the file written in XML?? John


I am not sure you can change the fonts though if you wish you can change the text from "Shutting Down" to "Bye Bye" or so, by editing, winlogon.exe.mui.

3 more replies
Answer Match 194.7%

Need the aforementioned drivers.  I have installed virtually every driver available in the Driver download page inc Control Vault and cannot get the two driver mentioned.

Any help would be appriciated 

A:Need drivers for Dell Latitude E6520 "Broadcom USH" & "Mass Storage Controller" Windows 7 64 Bit

Check under Security for the Broadcom Unified Security Hub (USH - probably a print/biometric reader) for the device that best matches your hardware:
www.dell.com/.../latitude-e6520
The other "mass storage controller" ... go to Device Manager, right-click the device in question, Properties, Details tab, change dropdown to Hardware Ids and give me the the VEN and DEV ID's (do the same for the above USH device if the driver linked does not work).  

13 more replies
Answer Match 194.7%

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

1 more replies
Answer Match 194.1%

Hi all

Ill cut to the chase.

What I am asking is someway of turning the Entire Windows Desktop/Screen "Black and White" not simply High Contrast.

I am one of those unfortunate ones, like many, that suffer from quite severe migraines from time to time. Couple this with frequent headaches, sometimes daily. This obviously isnt helped by the fact that my hobby and career are both in IT. I have tried every possible solution to alleviate the headaches. Lay off certain foods, make sure to have a balanced diet. Turn off any strong lighting around my computer screen, remove any strong colours from the desktop etc......

Windows XP / Vista have tried to address this issue with the accessibility wizard, where you can select the High Contrast Options to take any strong colours off the screen. Unfortunately this still doesnt get rid of everything.

When you make any major changes or "logoff" in XP/Vista, the screen fades to "black and white" for a short period. If you know what I am on about, thats the effect I am after.

More than likely a black and white layer is laid over the desktop to create this effect, unfortunately you would not be able to access anything underneath.

I need a fully functional XP machine in complete black and white.

On old CRT monitors you were able to remove the colour, making the screen B&W, but with alot of LCD screens this function is not available.

If anyone has any ideas, you would be helping so many people.

Any assist... Read more

A:Turning the Windows Desktop completely "Black and White" not just "High Contrast"

9 more replies
Answer Match 194.1%

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

A:"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Answer Match 194.1%

When trying to update with Windows update, i get a spontaneous reboot or a bluescreen-crash.
The filename "lzx32.sys" is mentioned.

The updates i'm trying to install are the following (roughly translated from norwegian):
"Update for Windows Media Format 11 SDK for Windows XP (KB939399)"
"Windows Tool for removal of dangerous software - march 2007 (KB890830)"
Other than that, i believe i have all other windows-updates.

I do however recall there beeing a third update on the list when i started the installation for the first time.
After the third or forth spontanous restart/bluscreen, when i figured something was wrong, it has disappeared from the list.
I do not know if it actually got installed or not.

I've been following the 5-steps-before-posting as good as possible.
From my normal startup programs msn-messenger and daemon-tools were shutted down before the dss-scan.
Here are the three logs (panda-activescan, dss-main and dss-extra attached):
PS: note that the "extra.txt" is from the first scan, which was done abit earlier than my last scan where the pasted "main.txt" is from.
This is because i was unable to get a fresh "extra.txt" from the last scan (no minimized window at all).
OK, here we go now:

Incident Status Location ... Read more

A:Windows Update - spontaneous reboots/bluescreens "lzx32.sys" - "Exploit/ByteVerify"

BUMP

In addition I've done some work myself (Rustbfix.exe, SpywareGuard, SuperAntiSpyware Free Edition, AVG Anti-Spyware), and it seems to be cleaner than it was (i.e. Windows Update works).

It would be nice anyways to get the facts straight, so here's a fresh log from Deckards System Scanner:

Deckard's System Scanner v20070318.32
Run by Claw_ on 2007-03-22 at 14:16:44
Computer is in Normal Mode.
--------------------------------------------------------------------------------



-- HijackThis (run as Claw_.exe) -----------------------------------------------

Logfile of HijackThis v1.99.1
Scan saved at 14:17:16, on 22.03.2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16414)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Programfiler\Fellesfiler\Symantec Shared\ccProxy.exe
C:\Programfiler\Fellesfiler\Symantec Shared\ccSetMgr.exe
C:\Programfiler\Norton Internet Security\ISSVC.exe
C:\Programfiler\Fellesfiler\Symantec Shared\SNDSrvc.exe
C:\Programfiler\Fellesfiler\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Programfiler\Fellesfiler\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Programfiler\Fellesfiler\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Programfiler\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Programfiler\Grisoft\AVG Anti-S... Read more

5 more replies
Answer Match 193.8%

Made a HUGE mistake, messed with the settings under "My Computer" > "Manage" > "Services> and also the "Local Users". Now having trouble, can not see my "Start and Task Bar", the "windows"+ ''e" is no longer working.

How can I restore the Services & the Local Users account without having to reinstall my whole computer? I am afraid I will loose lots of files... I do not remember what exactly I changed, but some of the "Services" I changed to "disable" now when I try to open properties and change them back, I am unable. The right click to get to properties is not working.

Your help is highly appreciated.

A:How to restore the defaults for "services" under "My Computer" > "Manage>

I am not sure about the "quick" way of restoring, but what you can do is go back to services, "RIGHT-CLICK" the white area select "HELP" then the third option is "Default settings for services"

you can see what the default was and manually restore it. I have tried to copy and paste it below

==========================================================

Service Startup Type Log On As Additional information
Alerter Manual Local Service
Application Layer Gateway Manual Local Service
Application Management Manual Local System
Automatic Updates Automatic Local System
ClipBook Manual Local System
COM+ Event System Manual Local System
COM+ System Application Manual Local System
Computer Browser Automatic Local System
Cryptographic Services Automatic Local System
DHCP Client Automatic Local System
Distributed Link Tracking Client Automatic Local System
Error Reporting Automatic Local System
Event Log Automatic Local System
Help and Support Automatic Local System
IMAPI CD-Burning COM Manual Local System
Internet Connection Sharing Manual Local System
IPSec Services Automatic Local System
Logical Disk Manager Automatic Local System
Logical Disk Manager Administrative Service Manual Local System
MS Software Shadow Copy Provider Manual Local System
Net Logon Automatic Local System
NetMeeting Remote Desktop Sharing Manual Local System
Network Connections Manual Local System
... Read more

3 more replies
Answer Match 192.9%

This is a resurection of an old unresolved Vista Post, and it also happens in Windows 7.
====================================
Original subject - Start Menu - program search issue
I use Windows Mail for my daily email tasks, and would like to be able to
open the program by using the vista search bar built into the start menu. The
problem is, when i search for "mai" it brings up Windows Mail, and I can hit
enter and load the program. However, when I search for "mail", it returns:
"No items match your search." I have it set to index both the start menu and
my programs directory, and have even tried to rebuild the index.

It seems kind of strange that Vista would recognize that when I type "mai" I
want my mail programs, but when I actually type "mail", it gets confused...
and this in turn has -me- confused.
====================================
and
====================================
Oh thank goodness, I've finally found someone else with the same problem.
The word I have issues with is "photo" ("phot" works great, but no results
for "photo"). Not a show-stopper, but WHY!?
====================================

I've noticed the same thing with Windows Desktop Search in Windows 7. After some experimenting I think I have the reason why, but not a fix.

It seems to em that mail and photo are probably used as "kind =" prefixes in Windows search, and even if you enter photo with out ... Read more

More replies
Answer Match 192.9%

Hello all,
I'm suffering froma troubling problem with a Windows 7 system.
This system has a boot HDD (C and data storage RAID5 array (D. The system locked up hard requiring a power down to get Windows operational gain.

The sytem is fine now, except the ~3 TB RAID5 array is not seen by W7. The W7 disk managment snap-in reports that the 2793.97 GB "drive" exists, but the status is "Unknown" and "not initialized". Needless to say, the drve was online and contained LOTS of data before the crash. Due to it's size, the drive was GPT.

I ran a synchronize on the RAID 5 array and that finished w/o error, so I assume the actuall array is fine.

Any recommendations for what utllity/diagnostic/etc. to try next?

Further info: The RAID 5 is a creation of the AMD SB750 "southbridge", which uses tech licensed by Promise Technology.
 

More replies
Answer Match 192.9%

After a catastrophic computer failure, I managed to recover almost everything. However upon booting up I got the message "BOOTMGR is missing". I used the original Windows installation disk to do Startup Repair, which recovered BOOTMGR. However now every time I boot up I get a message from Windows Boot Manager asking me to choose between "Windows 7...(recovered)" and "Microsoft WIndows Recovery Console". How can I get the computer to boot straight into Windows 7?

More replies
Answer Match 192.9%

So I have this weird thing happening in my relatively fresh install of Windows 10.
Whenever I search for "Check for Updates" or "Windows Update settings" on the search box of the start menu, I get the results that I want but if I press enter or try to click on those results nothing happens.. As far as I know I can click all others search results but those, and maybe others related to windows update.

I can still get updates by going to Settings>Update & Security though.

In my other computers this works fine, and as far as I can tell all the updates are done.
From what I've searched around other people seemed to have a similar issue where they couldn't acess the settings at all which isn't my case. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results.

A:Can't click on "Check for Updates" "Windows Update settings" on Start

Spanker,
.............. Still I tried the sfc/ scannow that a lot of users seemed to recommend but no results. .....................

Please clarify what did you mean by "no results".

When sfc /scannow is completed, it will give you one of the following 3 reports....................(paraphrasing)

1. No integrity violation.
2. Found corrupted files and repair is successful.
3. Found corrupted files but unable to repair some of them.

Which one of the above is applicable to you ?

3 more replies
Answer Match 192.9%

I just installed a new 60gb hard drive as a back up to put my movie files on,it installed fine and it works fine but i get "windows milenium emergancy boot" when i boot the system up .I don"t know if this error is serious but I do know that the system seems less stable in this boot mode..can someone please help? thanx
 

A:after installing new "hard drive" it starts with "windows emergency boot"

closing duplicate, view this thread
http://forums.techguy.org/t76279/s5b1a29d68c715c9a36d25291025adddb.html
 

1 more replies
Answer Match 192.9%

ie9 new browser opens "blank" windows 7. Changing it to "home" doesn't last if you shut down. Next session, it still opens "blank"

A:ie9 new browser opens "blank" windows 7. Changing it to "home" doesn't

Welcome to Seven Forums bobbot11. Help us understand. When you 1st open IE, it opens to a blank page instead of your home page? Or is opening new tabs that open a blank tab? Or is opening a new window that opens a blank window?

If IE is opening to a blank page instead of a home page you have set, try re-registering IE.

Download the IE Restorator, and choose Re-register 32 bit IE in (whichever version your OS is) W7

SF IE Restorator - Troubleshooting General Issues with IE

See if that helps. A Guy

1 more replies
Answer Match 192.9%

Hello, i have been living with this issue for some time now. I run XP pro, I have a 2GHZ AMD processor with 1GB of RAM. I normally leave my computer on but when I have to reboot it is painful. I run disk dfrag, adaware, spybot, cc cleaner, spyware blaster, spywareguare etc... on a regular basis. I have run Hyjack This files in the past, I have tried deleting the prefetch files. I have run MS bootVIS. Would anyone consider helping me to put this to bed. i almost think that it sounds like a hardware issue but i'm not sure how to diagnose the problem. I have gone into msconfig and reducing the programs that start at boot-up but this didn't help much.\


thanks in advance, CH

A:My computer takes 18 minutes to boot-up ""Help""

welcome

to start, make sure there are no yellow alerts in the device manager.
click view, then show hidden devices in the manager.

list your complete system specs including the supply.
once your system has windows running, does it behave accordingly? fast enough?

how many antivirus programs are installed?

19 more replies
Answer Match 192.6%

Hi, I'm a new-commer and have been following this thread avidly and taking everyone's advice as I too have identicle problem to Chaz and other bloke i.e my PC (XP) is very slow, shows torch when you open "My Computer" for 15 secs, and when I use Explorer takes ages to find a web address so I'm using Firefox which is fine. Been bothering me for months, tried RWnewson's registry and didn't work. i don't have. Created shortcut direct to C drive to bypass "My Computer" delay however while this works, PC is becoming worse as when I move any files from one folder to another within the C drive the PC can;t cope and stops responding. HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanc ed]
"NoNetCrawling"=dword:00000001 anyway.
My computer is not part of a home network nor does it say searching when I open My computer. This did all start when I installed software for new digital camera and webcam. Uninstalled cameras but still runs slow. Bugger.. Help. Tried registry cleaner and various virus killers. There is nothing threatening.
Interestingly when I end process for sychost.exe everything works fine but then Windows closes down in 30 seconds. PLEASE HELP!!!!
You all seem interested in Hyjack this report so here is mine
Logfile of HijackThis v1.98.2
Scan saved at 00:00:20, on 26/10/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2900.2180)

Running processes:
C:\... Read more

A:XP "My Computer" and "Explorer" taking ages to open

assuming you ran spyware and adaware cleanups, i would suggest reinstalling windows..... Windows (every version) will eventually slow down and not respond, act very unstable, not cooperate, and eventually it will commit suicide and give you major blue screens. then the computer has problems booting... a reinstall (a fresh reinstall preferebly) would probably fix it.....

could you post your system specs? that may help a little bit...
 

3 more replies
Answer Match 192.6%

Hello,
I got this problem today. Normally when right clicking on the "explorer" icon it shows shortcuts of folders that I added as well as frequently visited folders.
But now it shows nothing but two options: "Windows explorer" and "detach the program".
I tried to move new folders in but nothing was changed.
Please, what is my problem? How could I solve it?
Thank you!

A:"Frequent" and "attached" disappear from Explorer Icon

Problem solved!

Jump Lists - Reset and Clear All Items

Delete everything in these two folders:

%APPDATA%\Microsoft\Windows\Recent\AutomaticDestinations
%APPDATA%\Microsoft\Windows\Recent\CustomDestinations

And then you can make new shortcuts as you want!

1 more replies
Answer Match 192.6%

Hello, nice peoples that provide so many fixes to make Windows suck less.

I've been looking for hours, but the terms are so general I can't find anything. When I open up Windows Explorer, the "Computer", my profile folder, and the Recycle Bin all appear under "Desktop". Which makes finding things a pain in the butt.

Is there any way to set those items as their own icons, outside of Desktop, and remove them from under Desktop? Basically, I want to see this:

-Computer
└C:\
└Folder
└Folder
└...
└D:\

-Desktop
└Folder
└...

-senselocke
└Downloads
└Favorites
└...

-Recycle Bin


I know you guys have found a ton of tweaks for Windows 7, but this one has bugged me for a while now. Has anyone found a way to get something sort of like that?

A:Move "Computer" and "[username]" out from under Desktop in Explorer?

Hello Senselocke,

You could use the tutorial below to add the User Folder (ex: senselocke) as a separate group in the navigation pane.User Folder - Add or Remove from Navigation Pane
You could use the tutorial below to add the Recycle Bin as a separate group in the navigation pane.Recycle Bin - Add or Remove from Navigation Pane
You might also see if unchecking the Show all folders option in the navigation pane may help get you closer.

Hope this helps some,
Shawn

3 more replies
Answer Match 192.6%

If I open "My Computer" and then I double click on the C: drive icon (or any drive), it opens up a new window with the Search panel on the left. If I right click on a drive, the menu comes up and "Search" is the in bold, indicating it is the default. How can I change this so it is no longer the default, but opening it up with "Open" as the default?
 

A:Explorer Window defaults to "Search" instead of "Folders"

Start> Run> type: regsvr32 /i shell32.dll then hit OK.
If that doesn't work, try this script repair from Doug Knox.
folder_open.vbs
 

2 more replies
Answer Match 192.6%

When attempting to browse folders using Explorer opened from Start Menu Or left click on start button, Explorer will allow click on "-" to close paths, but hangs with hour glass if any attempt is made to expand any path or open any file. Explorer remains in this state until closed, at which time Windows asks if I wish to report the problem to Microsoft.
If I use the "My Computer" icon on the desktop to browse, all actions including access to networked resources work perfectly.
Can anyone please explain the difference between the two file browsing utilities and offer an explanation of the above?
My system is: AMD 3000; 2GB Ram Xp Pro with all service packs and updates. I am on a wired network with fixed IP addresses. Other network components are: Old Dual P350 with 0.5GB Ram running Windows 2000 (Explorer on this machine has no problems including access to networked resources); Buffalo 1TB Link Station; 2Wire ADSL router and HP LaserJet 1100 printer.
 

A:Solved: "File Explorer" hangs, "My Computer" does not?

8 more replies
Answer Match 192.3%

Hello,
First let me tell you about my system.   This is an Inspiron
E1705/9400 laptop with the T7400 Core 2 Duo processor running at 2.16
GHZ.   It has 2 GB of RAM and a brand new 500GB Hitachi Travelstar hard
drive (7200 RPM).   It also has the GeForce Go 7900 GS video card.   
It previously had Windows XP Professional (32 bit) and worked fine.  
But, I have three computers in my home and home office and would like
them all to work better together on my wired home network, so I am
upgrading all three to Windows 7.   My two desktops (one is Dimension
XPS 420 and the other is Dimension XPS 430) seem like they will be no
problem to upgrade to Windows 7.   But, this laptop was not listed on
Dell's Windows 7 Compatibility List.   However, the Windows 7 Upgrade
Advisor that I downloaded and ran seemed to say that it was OK to do a
clean install of 32 bit Windows 7 and it only had a few minor concerns,
where it said to check for updated drivers from the manufacturer.   The
laptop originally came with a 100GB hard drive.   For my use, that is
getting very small, so I decided to get the same exact 7200 RPM drive
in the 500 GB size.   This will allow me to do a clean install of the
32 bit Windows 7 OS on the new hard drive and not have to wipe the old
drive to do it.   I can just hold onto the old HD and stick it back in
whenever I might ... Read more

A:Minor Problem with New Windows 7 Installation on my Inspiron E1705/9400 - two entries for "Base System Device" under "Other Devices" with yellow exclamation point

BTW, I just downloaded and installed the driver pack from that ftp location and it worked, even for Windows 8.1 - 64 bit.
Thanks Steve!

Roger

9 more replies
Answer Match 192%

every time i try to open one of this folders a window apears with this content
cant have acces to C:\Documents and Settings\Mike\Local Configuration\{one of these folders} acces denied
this affects my IE i cant download nothing thru IE all my files on that locations i cant set dispaly pictures on WINDOWS LIVE messenger and all thinks that has anything to do with those folders
any suggsestions or idea
hope you can help me
pd ive scanned my computer and its all clean also i cant install windows XP serivce pack 2 im kinda stucked :/
 

A:cant open "temprorary files" "aplication data" "program data"

11 more replies
Answer Match 192%

"no audio device" "no playback device" "No Sound Card was found"
ok.. I'm stuck.. puzzled...

I recently had a professional computer fix it company wipe my computer and now I do not have any sound. I do not have even the little icon on the bottom left hand corner to turn volume up or down. My keyboard does not allow me to turn the volume up or down, it seems unresponsive to volume but does light up on the screen showing VOLUME... but of course, there is no volume... I am computer illiterate and thirsty for answers...

Operating System
Microsoft Windows XP Professional (5.1, Build 2600)
Media Center Edition Version 2002 Service Pack 3

System Manufacturer: HP Pavilion 061

System Model
Enclosure Type: Desktop
RC663AA-ABA a1640n

BIOS: Phoenix - AwardBIOS v6.00PG

Processor
Intel(R) Core (TM)2 CPU
6300 @ 1.86GHz (2 CPUs)

Memory: 2046MB RAM

DirectX Version: DirectX 9.0c (4.09.0000.0904)

Control Panel>Sounds and Audio Devices>Volume
indicates "no sound" and Device Volume is all the way to LOW and everything is GREY and untouchable/unchangeable

Control Panel>Sounds and Audio Devices>Audio
indicates "no playback devices" on Sound Playback

Sound recording is working fine as I use skype many times but I can not hear the other party but they can hear me just fine.

Starting with the BIOS, I went into Audio and made sure this was enabled.. it was...

downloaded/installed Microsoft... Read more

A:"No audio device" -- "no playback device" -- "no sound card was found"

STLj said:





<snip>
after RUN>
typing in "dxdiag"
DIRECTXDIAGNOSTIC TOOL>Sound
it reads under notes,
"No sound card was found. If one is expected, you should install a sound driver provided bv the hardware manufacturer".

This is where I get fuzzy and lost. Do I need a new sound card installed? Is that the problem?Click to expand...

That dxdiag "no sound card" message is misleading as I've found it says that if no driver OR sound card. I think you're missing the right driver

Also, it would seem from your post you have High Definition (HD) audio. Which means you'll need to find the right High Definition audio driver. (AC97 pre-dates HD audio so the Realtek AC97 couldn't be right)

Try starting on the HP support website HERE and enter your model number or they have a button where they'll try to identify your product and drivers for your model. They should list an HD audio driver there
 

1 more replies
Answer Match 191.1%

I came across this error in the Task Scheduler when checking scheduled task and it happened as soon as the application was opened so I did a little searching and found out the first occurrence was due to the Defrag schedule and found a solution for that here :

[/URL][/IMG]

http://answers.microsoft.com/en-us/...s/01e60fa1-8004-40b4-9cf0-247fb80edb56?auth=1

So now that took care of that error and decided to check a few more folders and sure enough I located another error of the same having to do with the AppID folder in the TaskScheduler Windows folder and it seems as though the PolicyConverter entry is missing from the task scheduler in this folder and more than likely from the Reg. I have not done a search there yet but it is located in the Windows Task folder system files . I will cut to the quick here and ask shouldn't I be able to import export that entry from a system Reg that has the entry to the system that does not have the entry and reboot and go back into the TaskScheduler to see if the entry is there now ? Of course I would first back up the system Reg or probably just do a complete back up first the continue .

I have attached some more Images for anyone's ? if need be .

I preformed sfc /scannow more than once with no results .

The images below are from a working system .
 

More replies
Answer Match 191.1%

Hi everyone. I'm new to the forum. I am running Windows XP SP2 Home Edition.

Background. I was running Windows IE 7.2 beta no problems.
I decided to upgrade to Windows IE 7.3 beta the system would not. I removed 7.2 before trying to install 7.3 beta. I dropped back to IE 6 thinking it would run correctly, but I was wrong.

When I try to move a file using the "Copy to" or "Move to" window, the window frame displays, but there is nothing in it except at the top "Select the place you want to move "x" file, and then at the bottom of the window, "to view any sub folders click plus sign," Move, New Folder. The entire file system is missing where I could select a file to move to, example:
C:\ and all the sub folders are not displayed so I cannot select one. The system still works, but all the files are sent to C:\SW3\F2 which is most likely the last folder I accessed before this whole failure to install mess started.

Is there any way to restore the file system so I can select where I want to send my files when I copy and move without dragging them with two open windows?

Thanks. I have more questions, but this is enough to start with.

I appreciate the help. I really screwed this thing up. I am currently running IE6 with expanded stuff left over from the botched install attempt from IE 7.3 beta.

5Turbo5
 

More replies
Answer Match 191.1%

Windows 7 Pro, 64-bit, boots up and runs fine as long as "Windows Search" is NOT checked in "Services".

When I run msconfig in the Services Tab, that is the Windows Search checkbox that I'm talking about.

If the box is checked, computer will start up, allow me to click on my user icon and load everything as if it's ready to go. The cursor moves with the mouse but does not respond to mouse clicks, also the computer does not response to the keyboard. If I click the start button, I get the spinning round wait icon (or whatever that is called). It also runs fine in Safe Mode.
I tried sfc.exe /scannow I have all the latest windows updates. I have run several different anti-virus, anti-malware programs. I ran chkdsk. Do I need Windows Search checked in Services? What does Window Search do? Is that where you can search from the Start Button area?

A:boots up then freezes when "Windows Search" is checked in "Services"

Which flag did you use with chkdsk - /F ?? My first guess is that Search is trying to index and snagging on something - either a file system problem or bad disk sectors. The /F flag deals with the filesystem. If you haven't tried /R, for sectors, do so, but only after backing up important data, and perhaps taking a system image if the system's current state is valuable to you. I prefer to run chkdsk from a WinPE/RE boot disk so I can study its output at leisure.

9 more replies
Answer Match 191.1%

For a couple weeks now, My laptop has been making a "pop" sound everytime on start up after the windows logo comes together it makes a faint pop sound then continues to the login screen. Everytime I muted or unmuted the speakers it would make the sound too. I changed my driver the the Windows default and it stopped but the pop won't.


Laptop Model / Manufacturer : Gateway NV53A
Sound Driver : Realtek (But changed to Windows Default)

A:Laptop speakers emit a "pop" sound after "Starting Windows"

The windows default is the culprit here.

When your system boots, drivers started one after another, the pop sound came in because the default driver is not built to especially manage your audio card.

Download the driver from the manufacturer according to your model, install it and I assure you all will be fine.

cheers.

3 more replies
Answer Match 191.1%

Hello

My Brand new Laptop: Lenovo g505 after upgrading it to windows 8.1 from MS Apps store now i am not able to connect to internet i get "limited" or "No Internet Access". i have tried to re install the driver no luck

Lenovo support suggests to do factory rest but i dont want to go back to windows 8

Does anyone else has any other idea on how to fix this issue ?
Thank you very much

A:Windows 8.1 Wifi showing "limited" or "No Internet Access"

Try rebooting the router & modem. Usually limited connection, means that the compute has failed to communicate properly with the Wireless Access Point, or wired router connection.

22 more replies
Answer Match 191.1%

To anyone that can help me out:

I purchased a windows anytime upgrade key and upgraded my system from windows 7 home premiuim to windows 7 ultimate now when my windows tries to update I get this: (See image titled "message")



To bring you up to speed as to what I've done so far:
I ran sfc\scannow and no errors were found
I downloaded the hotfixes and apllied them and still could not update
I tried to do a system restore to the point before I upgraded, but I could not perform one because all of my previous attempts to update windows automatically creates a system restore and all the restore points were within a 24 hour period
I installed a system update readiness tool as per "windows help and support" dialogue box

To see the updates that did not install, refer to the image titled "update"

Really, I feel like I've done my homework and I've exhausted my efforts as to how to fix this problem. I'm currently going to school for computers and so I really like to apply what I learn in real world situations, but this one has got me stumped!

I'm also attaching my checksur.log I don't understand it now and it looks like a foreign language to me, but as I progress through my information systems degree I hope one day I can become a techsupport forum partner.

Any help would be greatly appreciated!!

Thanks in advance,

Techstudent36

HERE IS MY CHECKSUR.LOG


=================================
Checking System Update Read... Read more

A:windows update error code "WindowsUpdate_80073712" "WindowsUpdate_dt000"

Hi have you tried running a start up repair An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

7 more replies
Answer Match 191.1%

Hi. I'm thinking about repairing Windows 7Home Premium 32bit with the DVD, because of BSOD, but I hesitate.

I first need to know if the backup folder called "Windows.old" will be a COPY (keeps Date Modified but updates Date Created) or a CUT (simply moves all folders to an other, thus doesn't change Date Created). Thanks!
So of course, only those who have ever reinstalled Windows 7 may know the answer. If you don't know but have reinstalled Windows 7 at least once, please spare 30 seconds to check, simply find a file like a picture or music that you had before the reinstall, and see in the bottom bar of explorer if its Date Created is the original or the reinstall date. You can also click Display tab in Explorer, then Sort by > Others > check "Date Created", > OK > Click display again > Sort by > Date Created. Don't mistake with Date Modified, I know the original Date Modified is kept upon copying, but it will update if you modify the file obviously. Please be honest and double check, losing 5.9 years old dates of my past would be heartbreaking, like mixing the pages of my diary!

Date Created is very important to me (and is underrated because it's not the default sorting option unlike Name/Type/Date Modified) because my computer is 5.9 years old, now has thousands of files and folders and it's easy to find them back and organize them with Date Created sorting if I didn't write tags or description in the file name.
If it doesn't ke... Read more

More replies
Answer Match 191.1%

I have looked around for help on this issue and havn't been able to find a resolution that works. I think because I havn't been able to find any imformation on my specific issue.

I am one of the most computer literate people I know, so when a co-worker mentioned to me that he was having problems with his computer, I agreed to look at it. His problem was simple, he had a lot of viruses. I have cleared most (however I assume not all) viruses and instinces of spyware. The computer worked fine for a little while while I did some final checks on his computer, then the problems started.
He has a Dell Inspiron 710m Laptop, running Windows XP Pro. (Service tag 8sk8091)
As far as I can tell, he has not added or upgraded it in any way. He only has some basic programs.

I know that the issues might have something to do with his wireless.
He is running the Intel® PRO/Wireless 2200BG.
The computer is getting stop errors (BSOD)

The first one was called DRIVER_IRQL_NOT_LESS_OR_EQUAL Stop: 0x000000D1 amd listed the file w29n51.sys (which upon further study, turned out to be a file related to his wireless.)

I have already updated the drivers and reinstalled the program with the latest versions on the Intel website.

I also noticed (though with not frequent) the stop error with the same name and stop code, but which listed the NDIS.sys file (which upon further study turned out to be a system utility).
and now, I have gotten a stop error of 0x0000000A, (IRQL_NOT_LESS_OR_EQU... Read more

A:Solved: Windows "logs off" after "open with" repair (userinit.exe)

16 more replies
Answer Match 191.1%

What is the difference between these two versions of Windows Vista?

- 66J-00003: Windows Vista Business English Upgrade North America DVD
(source: http://www.microsoft.com/canada/wow/save/eligibleproducts.mspx)
- 66J-00023: Windows Vista Business English Intl UPG DVD
(source: http://www.microsoft.com/italy/annunci/windows/generale/windowsvista....)

Can I legally use both of them in Italy?
 

A:Windows Vista "international" or "North America" version?!

It's probably just the languages available, the International version would probably have more languages and english for the default and less in the North American version, I can't see any reason why you couldn't use them in Italy.
 

2 more replies
Answer Match 191.1%

Hello guys,

I don't know what I did, but nothing happens when I click on those two things in the search bar:

View image: wtf

I reinstalled Windows a few hours ago, and IIRC pressing those with the mouse lead somewhere. Now when I click on them, it does nothing. I have to type in "Settings", so I can click on the actual Windows App. Then I can navigate to those settings. IIRC those results were "clickable".

Can somebody help?

Thanks in advance!

A:Can't open "Windows Update Settings" or "Check for Updates"

Hello iamnewhere,

If you like, here's a Windows Update shortcut to use for now until hopefully an update will sort it for you.

Windows Update Shortcut - Create in Windows 10

3 more replies
Answer Match 191.1%

Hiya, I could use a little help resolving what should be a simple problem. It's really a long story, but to skip to the important part, I'll just recount this little tale:

I wanted to delete some files off of an old external hard drive to make space for some new stuff. It didn't matter, since the files I was deleting had been long since copied to a new drive. However, Vista, in its infinite wisdom, told me I couldn't delete the files, and it was for my own good. I politely said, "okay, Vista! Thanks for keeping me honest!"

But then I muttered, "I already have a mother" under my breath, and proceeded to go behind Vista's back and turn off User Account Control so I could delete the files anyway. Well, I knew that wasn't the best idea, so I immediately turned UAC back on afterwards, but it was too late. Vista caught me, and after the second restart, smote me with a problem I'd seen once before: nearly every program on my computer was said to have been closed after it "encountered a problem" or some nonsense, and when restarted again, the disk checker was run, found numerous problems, and did whatever it had to do to go about fixing them all.

Now I'm not sure what all that was about, because everything seems to be running okay now, save for one minor thing. That little "click" sound you get when navigating windows explorer was nowhere to be heard. I tried another restart and another disk check, b... Read more

More replies
Answer Match 191.1%

I am stuck on "Start Windows normally" and "Launch startup repair"
When I choose "Start Windows Normally",it gives me blue screen with the following error:Unmountable_Boot_Volume.On "Launch startup repair" I am stuck on the Windows 7 wallpaper with cursor and can't even open Cmd trough Shift+F10.I've tried re-installing windows from USB stick and I am also stuck on "Setup is Starting".Any help please,and how much I am screwed?
P.S-On Advanced boot options I can't use Safe Mode,Safe Mode with Networking,Safe Mode with Command prompt and Last Known Good Configuration,it gets me back to "Start Windows Normally" and "Launch startup repair".

A:Stuck on "Start Windows normally" and "Launch startup repair"

Time to boot to an external testing/repair environment, such as a Win7 Repair disk or a hard drive test disk.

5 more replies
Answer Match 191.1%

I'm not sure what this is in Windows Update [and this seems to be greyed out itself too], but how is it possible to have no results in Google on this KB that's in Windows Update?

I also clicked on the "more information" for the Microsoft Knowledge Base, but nothing came up there either.

A:A "non-existent" Windows update ("KB3024777") even Google can't find

Also note that it can't be unchecked/deselected.

Edit: It seems this update removes kb3004394 and vanish without a trace (except in History).
Neither seems to be available in the uninstall list afterwards.

9 more replies
Answer Match 191.1%

My Windows login and logout sounds have stopped working. I went to the control panal and checked in the "sounds" and the login sound worked when I tested it there plus I checked the sound mixer and all sliders are active and pulled up. What could be the problem? All other sounds are working?

RBG
 

A:Windows "Login" and "Logout" sound stopped working

http://www.kellys-korner-xp.com/xp_tweaks.htm

line 211 left hand side

211. Restore Startup and Shutdown Sounds

hope it helps

joan
 

2 more replies
Answer Match 191.1%

Hi,

I have a Toshiba r700-181 (PT310E) work laptop. It is running Windows 7 x64 Enterprise.

It has one 4GB stick of ram which is PC3 10600. Windows works fine with this.

I have obtained a 4GB stick of ram which is PC3 12800. With just this one in, Windows works fine.

However, if I have BOTH sticks put in, the BIOS recognises that there is 8GB installed, but Windows fails to boot.

It gets stuck at the "Starting Windows" screen. If I restart it asks me if I want to start windows normally or to run the Windows repair. If I try that I get the message: "Error: 0xc0000225. The boot selection failed because a required device is inaccessible."

I tried using a Windows 7 System Restore disc but that doesnt work...

If I try either of the sticks in the laptop one at a time, then Windows 7 boots up fine.

Is this just down to the laptop not being compatible with the mixture of speeds? I thought that if they were mixed it would just use the lower speed by default?

So confused

A:Laptop hangs at "Starting Windows" or getting "Error 0xC0000225"

Hello borito, Welcome to SevenForums!

Is this a laptop provided by a company you work for by any chance?

9 more replies
Answer Match 191.1%

Do you or anyone else willing to help me, know which registry key I would have to manually delete in order to remove the "Move To" and "Copy To" options from my context-menu?

Please help me solve the problems with my registry. I'm using Windows XP Pro (64-bit Edition). The problems started when I tried opening windows by clicking on folders & files, which are listed on my Start Menu:

Whenever I double-click (or right-click on any folders listed on my Start Menu, and then select "Open" or "Explore") to open files listed on the menu, the "Move To" & "Copy To" windows pop-up.

The "Move To" & "Copy To" windows won't go away, unless I click on "OK" or "Cancel". And now that I have the lastest stable-release of WinRAR installed on my XP, the "Move To" and "Copy To" options aren't listed on my context-menu, anymore. However, I can't open any of the folders I want to access via my Start Menu because my registry is still setup to make the "Move To" and "Copy To" windows appear. And now when I click on "OK" or "Cancel" on each of those windows: none of the folders I wanted to open appear.

The previous owner of my PC configured the registry to make the start-menu & context-menu include the "Move To" & "Copy To" options. So whenever I click on an option in the start m... Read more

A:Why do the "Move To" & "Copy To" windows appear when I click on Start Menu?

Sorry, I have no idea how to fix your particular issue. But, the way to avoid this kind of problem is to immediately format the disk and install the operating system fresh when taking possession of a previously owned computer.
 

2 more replies
Answer Match 190.2%

Hi guys,

as most of you will be aware with the show desktop feature in the windows, which in the system tray on bottom right of your screen.

I need a tweak or registry edit to make it do "Win + M" Minimize all Windows, instead of "Win + D" show desktop.

Reason is it hides my gadgets and docks, while Win + M keep those on the desktop and just minimizes the windows.

any help would be really appreciated.

Thanks, and sorry mods if i posted my first post in the wrong section. please move it to right section.

Regards,
Summer.

A:Windows 8.1 "Show Desktop" to "Win + M" from "Win + D"

Welcome to the Forums.

You could post a request here:
Post New Requests Here - DonationCoder.com

Please read the rules before posting.

The Mod on that forum and others there use AutoHotkey as well as other programming tools. But ahk should be suited to the task. If someone knows an existing freeware that already does it, they will suggest it. Your request sounds like the type of thing they would take on if there's no existing freeware.

Edit: Donations are voluntary. Nobody on DonationCoder twists your arm even if they write a small custom utility for you.

3 more replies
Answer Match 189.3%

I am hoping that someone can help me with what may be a complex question.

I have a spreadsheet, similar to the demonstration file I have attached. In it, there are a range of columns. One set of columns (A - D), shows a list of numbers that are references to items in a store, and it also shows their location in the store, so it acts as a floor-plan. The next column (E) lists those items again to show the dollar amount that those items have produced in total sales (F).

So, what I'd like to do is to add a conditional formatting to show me the "cold" and "hot" spots on the floor-plan so I can see where sales are most concentrated. I would assume that this would be done with a colour scale (using the range of values in column F to work itself out)?

Either way, the figures in column F would change weekly, so the relevant cells in columns A - D would need to automatically change when they're matching cells in column E - F change.

I hope this makes sense, as it's difficult to explain, but any help that someone could provide would be greatly appreciated.
 

A:Solved: Creating Cell "Cold" And "Hot" Spots Based On Values In Microsoft Excel 2007

16 more replies
Answer Match 189.3%

How to remove the "Authenticated Users" "Create Folders" permission from the root of the C Drive via command-line?
I know this question has been asked many times before, but nothing works for us!
We tried the following:
Take ownership: I cannot take ownership using the Administrator account (local and Domain Admin accounts) of the root C:. Error Access Denied
Cuurent root C: owner is TrustedInstaller and acnnot be changed.
We cannot change or remove the Create Folders permission of the Authenticated Users of the root C: . Error Access Denied.
Drive C: is hidden via GPO, but many users can enter it from the File-Explorer and create folders in the root C:.
We do not want -for many reasons- to Block/ Prevent Access to C: via GPO.
We also tried to run cacls and/or icacls under the system-account (PSEXEC -i -s -d CMD). Error Access Denied.
icacls C:\ /deny *S-1-5-11:(NP)(AD)
Error Access Denied.
icacls C:\ /remove:g *S-1-5-11
Error Access Denied.
cacls c:\ /e /c /R "Authenticated Users"
Error Access Denied.
Also using GPO "Computer Configuration\Security Settings\Restricted Groups ..." does not work!
Now we have this issue on over 450 pc's on our network. Nothing work. Please help! How to remove the "Authenticated Users" "Create Folders" permission from the root of the C: Drive on command-line?


win_builder

More replies
Answer Match 189.3%

Hi,

running ie 9 & win 7 & avg

did cmd - sfc /scannow - no errors
no virus

problem started after ie9 install , so it seems

"windows explorer has stopped working"/"windows is restarting"

after error and little time all tabs pop up good and ready to go

just annoying - like my dog barking at 4:30am thinking she's a rooster

thanks,
marcus

A:[SOLVED] &quot;windows explorer has stopped working&quot;/&quot;windows is restarting&quot;

Hello Marcus,

Do you get this error when opening up IE? If yes does it happen instantly? or after browsing for a little while?

9 more replies
Answer Match 189.3%

Hi,

I'm using Windows 10 th2-10511 x64 and when I install EMET 5.5 final the EMET system service is installed with the "delayed start" flag and the service and never starts after a reboot. The same thing happened with the beta version, I didn't notice
it until the final was released. This issue doesn't occurs with EMET 5.2.
I switched the service back to the normal Automatic (not delayed) start, and everything seems to be working again. I was wondering if anyone else experienced this issue?


Also, can someone enlighten me about this warning message "DEP/ASLR Policy settings are ineffective by default; see user's guide on how to enable them". It appears when I enable the DEP/ASLR EMET GPO. I couldn't find any reference to this warning
message in the user guide. DEP seems to be enabled, I have no idea how to check for ALSR other than Process hacker that shows ASLR as N/A.
Thanks

More replies
Answer Match 189.3%

Hi all,

I'm puzzling this one. In the folder options when I choose 'view' the radio button to show the hidden files is missing. I've already checked the registry at the HKLM/Software/Microsoft/Windows/CurrentVersion/Explorer/Advanced/Hidden

and everything seems ok (value for 'Type' is 'group' etc.). Using the XP tweak (Kelly's corner #155) shows the hidden files, but the button still missing.

Another thing that I encountered with was that from the start menu the "Help and Support" not working. Again, the registry seems fine, and the process is activated (started). This came up when I tried to use system restore option - with no success.

Virus scan didn't find alerts of any kind

To make a long story short- below is the log file of HiJackThis. Please review it and reply if you see something to be concerned with for repairing my computer.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 14:36:54, on 21-Dec-08
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16762)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Network Associates\Common Framework\FrameworkService.exe
C:\Program Files\McAf... Read more

A:missing "show hidden files" button + "Help and Support" not working from start menu

Ok I found the answer (after quite a lot searching), as follows:

1. for the 'Hidden files' radio button - I used methods 1 and 2 from here-
http://www.technize.com/2007/05/13/s...s-not-working/

2. for the helpcenter I just reinstalled it as described here -
http://windowsxp.mvps.org/rebuildhelp.htm
note that the file 'dataspec.xml' is needed to be available for this, and it can't be done directly from the XP CD. The thing that worked for me was to insert the XP CD, and use the file that in my computer (C:\) and afterwards another file on the CD.

Again, all this happened with no virus detection, so I believe that there is no infection. However, if someone has remarks on the HiJackThis log I've put, feel free to add them.

Have a nice day,

Fitch.

1 more replies
Answer Match 189.3%

Hello Guys and Girls,

My wireless internet connections are currently set to a manually configured status, but this means I am having problems connecting to other wireless connections with free (ie unsecured) connections. I have tried going to properties and ticking the "Let Windows configure my wireless network settings", but I get a dialogue box coming up telling me that not all of my changes have been made.

Any ideas? Thank you in advance.

Sukita
 

A:Solved: Changing wireless connection status from "Manually Configured" back to "Automatic"

Why don't we start with the make/model of the wireless router in use, as well as the wireless adapter or laptop brand. Also, what version and patch level of Windows do you use?

If you have XP-SP2, you can set the machine back to installation defaults using the following procedure.

TCP/IP stack repair options for use with Windows XP with SP2.

For these commands, Start, Run, CMD to open a command prompt.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log
 

3 more replies
Answer Match 189.3%

Hey folks,

My first post on here but I'm in serious trouble. I got a "new" (to me anyway) desktop running XP today and found the audio hardware wasn't working. So I pillaged an old machine for its sound card, and inserted that onto the motherboard. Also connected the Aux and CD lines to the top of the daughterboard.

Since then, to my horror, the machine has failed to boot. All plugged in, keyboard working, screen on and being used on another box for this very post. All I get now is the usual chirps from the internal soundcard followed by a few very low notes, definitely depressing so I guess they're suggesting something's failed. There's no further action from the CPU, the fan still works, but there is no screen output whatever.

Have I fried the motherboard without realising?!

Also, ironically, the last failure tone was delivered by my speakers through the originally non-responsive audio hardware!

I'd love a bit of help on this one, because my knowledge of computers' insidey bits is pretty poor.

Many thanks,

Joe.
 

A:Desktop boot problem after sound card "meddling"... just a "beep" failure tone.

6 more replies
Answer Match 189.3%

As this question was never answered I'll post it verbatim with my own comments below,
See original post here;
http://forums.techguy.org/windows-vista/756093-flash-drive-s-active-light.html

In all operating systems up to Vista, the flash drive's "active" light turns off when I go through the disconnect procedure; but, in Vista, it doesn't. I have traditionally used this as part of my explanation to others (and a convenience to myself) about when to not to remove the flash drive from its USB port.

This is a problem common to all Vista systems I've seen.

Why does the light not turn off in Vista?

And, is there an easy way to correct this?

Additional information: I have eliminated this problem being hardware-related. I have loaded Vista onto one of my systems here that previously had Windows 2000, then XP on it and it was only with the loading of Vista that the problem developed on this system. Just to be absolutely sure, I did a restore of a previous image of Windows 2000 and the problem went away again. I put Vista back on and the problem came back. So, this is strictly a Vista problem.Click to expand...

I have had the same problem with every Vista system I have used and every flash drive (note this means SSD NAND flash not HDD's or card adapters). AS the last discussion degraded into useless questions about hardware and other OS's let's get a confirmation that someone out there actually has a flash drive that turns its activ... Read more

A:Flash drive's "active" light doesn't turn off in Vista when "safely removed"

have done a litte research and testing in my lab on several machines and have confirmd the problem. What it seems to indicate to me is that, in Vista, the light simply indicates power, not data transfer. Whenever I am transferring data, the light blinks.

While I have never actually tested it, I do not belive that the "safely remove" feature actually kills all power to the USB port in XP. If that is the case, then there is really no danger as long as vista has acknowledged the disconnect and knows not to try to write data to the drive.
 

2 more replies
Answer Match 189.3%

Hi guys. I noticed that in Win7, the applications in the new Quick Launch move if you run one of the applications in the "Pinned to Taskbar" section. For example, if I have Windows Explorer and Firefox next to each other and I click to open Windows Explorer, the Firefox icon will slide far to the right so that it's after the Windows Explorer task in the taskbar.

Is there a way to keep the new quicklanuch icons in Win7 in the same place, like WinXP?
 

A:Force Apps "Pinned to Taskbar" ("Quicklaunch" in WinXP) stay next to Start Button

10 more replies
Answer Match 189.3%

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\i... Read more

More replies
Answer Match 189.3%

OK fellow "computer-holics", here's a difficult one for ya. I have a user who e-mailed me the following:

"Ever since I downloaded Crystal Graphics' "PowerPlugs v 1.2" (powerpoint plugin software I purchased which allows for 3D motion graphics on slides), Microsoft Powerpoint won't allow me to access "Slide Color Scheme" or "Apply Design Template" from the format menu...."

I've tried completely removing Office, and re-installing it, but to no avail. I have yet to find an uninstaller for the "PowerPlugs" software, so I haven't tried that yet. (I wan't to save that as a "last-resort" anyway....even when I DO find an uninstaller). Does anyone know anything about the PowerPlugs software that could help out in this situation? Thanks in advance for any help.
 

A:Unable to access "Slide Color Scheme" or "Apply Design Template" in Powerpoint

I can only suggest that you use this form to contact the vendor of PowerPlugs:

http://www.crystalgraphics.com/main.support.asp

Whether you purchased it or not, it should certainly allow PowerPoint to continue to work.
 

2 more replies