Tech Problem Aggregator

New O/S and driver install "Out of Disk Space"???

Q: New O/S and driver install "Out of Disk Space"???

Forgive me, but I?m new to the forum and relatively new to [rebuilding] computers (compared to some of you, I?m sure?) I do have a tech background.

Having said that, I had to do a re-install of XP (SP1) on a Dell Optiplex GX620 that I have. While at it, I upgraded the HD to 1.5TB (Seagate Barracuda)

The XP install went well. I did not have a restore disk for the drivers, so I went to Dell?s driver download website and downloaded the correct drivers for my model/service tag.

I put the drivers on a USB flash drive and moved them/loaded them onto the Dell. I installed the drivers in order and most installed fine. A few however, such as the Broadcom 57XX Gigabit Divers, are telling me that I am out of disk space. I get the error and a dialog box says that the volume on the C: drive is -650GB, and I have -655GB Available, with 2328KB Required and Differences of -650GB? I have no-idea what?s going on here, but I can?t seem to install the driver(s).

I did Disk Clean-up, defrag, chk disk, Ccleaner? blah, blah, blah? I am only using 1% of the available drive capacity.

Any ideas?

A: New O/S and driver install "Out of Disk Space"???

BUMP... Does anyone know whats going on with this? It's a simple re-install and driver install problem; not a virus or anything weird.

Someone has on this forum has HAD to have seen this before.

Please help.

Thanks.

5 more replies
Answer Match 97.44%

Hi all, I'm trying to install a driver from a disk, but windows doesn't find it in the folder.

I need to press the "Have Disk" button but it isn't there. How do I get it to appear?

Thanks.

A:Can't find "Have Disk" button for driver install

Right click on the hardware in question.
Click update driver software.
Choose Browse my computer for driver software.
Click Let me pick from a list if device drivers on my computer.
There is where you'll find the Have Disk... button.

2 more replies
Answer Match 96.18%

Here's the story. I bought this new Samsung 840 250GB SSD.
I first did a clean install of windows 7 on it and it worked fine. Windows installed without much problem and everything. Then something didn't look right about the partitions. It looked like because I had all my HDDs connected while installing windows on the SSD the windows created the system reserve on the old HDD rather than the SSD. So I went back and decided to start from scratch with all the HDDs except for the SSD disconnected. I tried reinstalling windows on it but this time it didn't work. I tried formatting the SSD and it just gave me an error saying windows couldn't install on a GPT disk. I went into bios, made sure the PC was booting from the UEFI DVD drive and it still kept giving me the same error.

So I then booted up my old HDD. I tried formatting my SSD and now I can't delete the partition!
This is what my disk set up looks like:


If I click "extend volume" on the "New Volume (G" disk, it says "there is not enough space on the disk(s) to complete this operation".
If I try to create a "new simple volume" on the "unallocated" partition, it says the same...

Have I destroyed my new SSD now?! I just want it to work like a new clean disk...

A:If I try to "extend volume" it gives "not enough space on the disk(s)"

Hiyya Tracing try doing it with Partition Wizard mate Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition.
Brilliant tool if you can't do anything with the partition them just wipe the disk mate and start over with this SSD Alignment

1 more replies
Answer Match 88.62%

Hi everybody, I've made a lot of progress with this external drive, but I seem to be stuck now.

-------------------------------------------------

Unidentified problem with 3TB external drive (USB 3.0 enclosure) that the computer suddenly started treating as RAW. Spent the last two weeks running CHKDSK /r repeatedly. Slowly got through many hundreds of indexing errors. Now I get as far as "verifying security descriptors (stage 3 of 5)," but I seem to have hit a wall here...

CHKDSK won?t go any further because there is "Insufficient disk space to fix the security descriptors data stream."

Microsoft?s advice (Error Message:) is of no help to me. They say to ?delete some unneeded files from the disk and try again,? which doesn?t help me since I can?t get the drive to mount or stay mounted long enough to copy the files onto a different drive.

-------------------------------------------------

The drive behaves differently each times I power up its enclosure, but it is usually one of these things:

Drive doesn't mount.
Drive mounts after a few minutes. I see a generic "Local Disk L:" in Windows Explorer but, when I try to explore its folders, the computer takes about 15 minutes trying to read it (I can see the progress bar moving slowly across the top of the screen), and then says that "The parameter is incorrect." Drive disappears from Windows Explorer.
Drive mounts after a few minutes. I see the full Volume name that I originall... Read more

A:"Insufficient disk space to fix the security descriptors data stream."

Someone? Anyone?

8 more replies
Answer Match 88.62%

Hello, my system disk is an Intel X25-M G2 80Gb (74.4Gb) and I recently discovered that there is a rather huge discrepancy in used disk space.

According to disk properties I have used up ~73.7 of the 74.4Gb, but the actual files on the disk are only 51.7Gb if I show all hidden/system files, mark everything and check size and WinDirStat report the EXACT same thing.

I have no pagefile on my system disk, no hibernation file and no system restores (it's actually disabled).

So any ideas whatsoever what this could be? It's starting to become rather annoying to "lose" 25% of my system disk. I've run diagnostics and haven't been able to find anything, I've googled it extensively and found others with similar problems, but the only solutions I've found are pagefile, hibernation file, system restores and of course disk cleaning - all of which I have checked already.

A:Approx. 20Gb of system disk space "missing" - Intel X25-M G2

Hello Zeilon, and welcome to Seven Forums.

The tutorial below may be able to help you ID what may be using the SSD's space. Option 1 with WinDirStat is a good starting point.

Hard Disk Space - Free Up and Recover

Hope this helps,
Shawn

3 more replies
Answer Match 88.62%

My wife has a two month old Lenovo ideapad with Windows 7. We are now getting alerts that the D partition is near full. Is this system taking multipul backups of the harddrive C and storing them all? What are my best options to have a safe backup, but not overloading the D partition? I do see in; Computer>System>Device Manager>Disk Drives>D Drive General tab that there are two options at the bottom.
option one, (not checked in my case) "Compress this drive to save disk space".
Option two, (checked) "Allow files on this drive to have contents indexed in addition to file properties"
Would selecting option one solve my problem? If this system is saving a snapshot of D over and over, it will only be a matter of time when option one will be overcome.
SO, I would think that there has to be a setting that will let partition D delete older backups...right?

Would it be a combination of selecting option one and changing a setting that would enable older backups to be automaticaly removed?

A:Action Center "Check backup disk space" alert

Welcome to the forum
If your D drive is made for backup's only, you can delete all files exept the newest one.
But it's advised to make backup's on an external USB drive and change the frequency of backup's to your files and olso for images to your OS.

4 more replies
Answer Match 88.62%

Big Kudos to anybody who can solve this one! Very little/nothing on Google or microsoft support site.
Here's the problem:

I'm helping a family member who has a new Dell PC with Windows XP Home, Outlook Express 6.
Every time they close Outlook Express, the following Warning pops up:
To free up disk space OE can compact messages. This may take a few minutes. There are 2 options - OK and Cancel.

Here is the rub: We've closed the warning, or we've clicked OK, or we've clicked cancel, we've checked the box that says don't ask me again....these warnings continue to come up next time (EVERY time) Outlook Express is closed.

This is a senior citizen who has, maybe, 20 email messages and no shortage of memory or disk space. I want to prevent this warning from coming up ever again. How do I do it? Is there some default I can change somewhere?
 

A:Solved: "Free Up Disk Space" OE warning ?? Stop the Madness!

6 more replies
Answer Match 88.62%

I have a C: drive which I want to increase in size. Under disk management there is 20GB of "Free space" - (right next to the C: partition). But neither disk management or EASUES partition manager will allow the partition to use this space. How to I change "free space" to "unallocated" so that it can be used ?

A:Cannot extend volume (disk management) although "free space" exists

Can you post a snip showing what you have? An image makes it easier for us to help you. For example, you said that there was 20GB of free space next to your C: partition. What you didn't say was whether it was to the left or right of it.

7 more replies
Answer Match 88.62%

I'm hoping this is a simple fix. I'm trying to fix my elderly uncle's Asus laptop. System Repair pops up and fails. I booted to command prompt and found out it may be hard disk space. 400+ GB Hard drive (only one drive) and there's only 1024kb Free. I'm thinking that could be the issue. Hardware was checked out at the computer store and is fine. But they were going to charge him $200 to fix this failure to boot up issue. I told him to let me try first.

Can I possible "compact" this drive from the command prompt screen?


Note: I have no other Win 7 systems, so can't create a disk, and I have no original disks.
Also, no restore point has ever been set, and there are no partitions on the drive.

A:"Startup repair" failing - hard disk space issue?

Normally, I'd tell you to download a program or two to examine what's using the space or to clean up unnecessary files.

But with only 1024 kb of space, you probably can't install anything.

So--try this:

Start button, search box, type in "disk cleanup" and then poke the disk cleanup listing that shows up.

Let it clean up the drive and report back with how much space you then have.

You'll see an option in disc cleanup where it asks if you want to clean up system files as well. Say yes.

It should calculate how much space it will recover.

Let it run to completion. Might take a few minutes.

Then check your recycle bin to see if it's empty.

Report back with available space.

9 more replies
Answer Match 88.62%

I use microsoft office 2007 My computer is dual core 2.53 Ghz 3 GB memory and I have 91.4 GB free disk space.
I am using Windows XP Professional Version 2002 Service Pack 2
I work a lot with word and did not have any problem. Now i have a problem with one particular file that I can not open and I always get the error "There is not enough memory or disk space to complete the operation. " When I try to open the file File size is not so big 652 KB Any ideas what I can do.

Thanks
Ofer
 

A:Solved: "There is not enough memory or disk space to complete the operation."

What type of file? Where did it come from?

If you do not have file endings showing, you should. Be sure that there is not a hidden "exe" or "com" at the end of that file.
 

3 more replies
Answer Match 88.62%

I am attempting to transfer all of the files form an NTSF 250 GB external drive to an empty FAT32 250 GB internal drive via USB.

I keep getting an error message that says "Cannot copy (filename): There is not enough free disk space. Delete one or more files to free disk space, and then try again. To free space on the drive by deleting old or unnecessary files, click Disk Cleanup".

This is not true though, as the destination drive has more than enough space for the transfer.
 

A:False error - "not enough disk space" durring transfer

You cannot transfer all the files because many will be in use...

You will ned to make a drive image with a program like Ghost, or you can even use its drive copy feature.

It will be cake to copy an entire drive.
 

3 more replies
Answer Match 88.62%

Using XP SP-1, 40GB HDD
A folder named "System Volume Information" has been created in each drive (C:,D:,E:,F: )
and consuming significant disk space day by day. Whether deleting these folders will create any problem. Any other technique to stop increasing the size of these folders ? Please suggest.
Presently consuming more than 3 GB in total.
Sometimes I need system restore to speed up the PC (besides other registry tools ) ..therefore this function is enabled in the system.
 

A:Too much disk space consumed for "System Volume Information"

9 more replies
Answer Match 88.62%

Hello everyone,

I am currently a new registered user and was wondering if this was the correct place to post my problem. I have a issue with my Local Disk (C:/ Drive) and was wondering what was taking up so much space. I have a 1TB hardrive, currently on my Local Disk I have 136GB free of 454 GB. However, when I add up what I can find when opening the drive, it doesn't add up anywhere near the 317GB that it says has been used.

Now, I have currently installed...CCleaner, Eusing Regcleaner, AVG Free 8.0, and TreeSize, all of which I have run various times (still learning about TreeSize).

BEFORE I was getting scared because I had even less memory free (approx. 74.9GB of 454GB). But after running a Disk Cleanup...it knocked it down to it's current state. It still doesn't explain how I have so much memory used.

My only thought now is that there are extra copies of my folders and files. Or most likely this has something to do with Vista's "System Restore". I am not very adept at using this PC. Whatever advice you guys can give...try to dumb it down for me and tell me where to go (e.g. Control Panel>Systems>etc..)

And my System Specs are incomplete because I don't even know where to go to get all that information! So if you need to know something about my PC tell me where I might find it or just look at what I have for my System Spec.

Thank you very much, I'll be checking my post at least once a day so I'll try to respond quick if any of you pros have an idea... Read more

A:Local Disk/System Restore/"eating" up space

Hello Mike, and welcome to Vista Forums.

This tutorial will help you see how much disk space is being used by System Restore and how to adjust the MAX size it can use. With a 1TB drive, it will have a high MAX by default.

System Restore - disk space

Hope this helps,
Shawn

3 more replies
Answer Match 88.62%

I know this question has been asked before as I've read about it all over the Internet. In order to get rid of the 'Low Disk Space' message it says to go to the registry and locate HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer, type a new value, etc. The only problem is I don't have an Explorer key. It ends at Policies.

I've tried everything. I've tried creating the key myself, and I've tried inserting the value into the policies folder. Nothing has worked. Can anyone help?
Thank you
Brad
 

A:Solved: Can't get rid of "Low Disk Space" message on my recovery drive

I guess no one else is having this problem. Do you think this is a problem with HP?
Brad
 

3 more replies
Answer Match 88.62%

When I couldn't delete the student office trial (which came installed with my HP laptop purchase) from "add/remove" due to having deleted first, a different but associated program (can't recall the name), I followed these tedious instructions found on this link - http://support.microsoft.com/kb/928218

The problem is...I noticed that instead of freeing up disk space, it took up more. How can I remove this trial completely to free up space?
 

A:Office Trial Removed From "Add/Remove" YET Ate Up Disk Space

ellaphant5 said:


due to having deleted first, a different but associated program (can't recall the nameClick to expand...

This can be a problem.

Also, I would say that fix from MS applies only to when the proper procedure for the uninstall of Office is followed but the end result is not what we expected so basically that didn't wasn't any help.

We need to know what other mystery "associated" program is.
 

1 more replies
Answer Match 88.62%

Hi there,

I am facing a problem with the backup program of Windows 8. My computer (Asus with 250SSD) disk is new and I just installed my programs. Now I want to create a System Image using Windows. The image should be around 50go. Everything works fine until I get a message error saying my external disk does not have enough space, which is impossible since it is completely empty (500go).
Did anyone have ever meet that problem and/or have advices to help me? I would like to solve that and not be forced to used another way to backup.

Thank you,

Vari

A:Create system image failed - "not enough space on disk"

Is your second disc formatted NTFS?

7 more replies
Answer Match 88.62%

i heard this is way to much. what should i set it to?> or what else should i do?

thanks alot,

dustin

A:in my internet options, my "amount of disk space to use" is 8591 MB..?

It's down to preference really but you don't really need it to be set more than 200 mb's.

Hope that helps :)

1 more replies
Answer Match 88.62%

Hi there!
First of all thanks for the great toturial and the forum.

I tried to do the in-place upgrade from Windows 10 (build 1607) in order to "repair" my system (there are some quirks I want to get rid off) using a freshly created USB (as per description), but it fails with the message "make sure that there is enough disk space available in your PC" (rough translation from german; see attached screenshot) without any further information.

It then automatically cycles back to the question on how to install (i.e. with keeping data and apps or without) and then back into the above mentioned error message.


This is what I already tried or made sure of prerequisites needed:
I have made sure that there is definitely enough disk space available.My C: partition (where windows resides on) is 106 GB large and has currently over 58 GB of free space available.The system partition that is supposed to be 350 MB is still 350 MB (I read something about this potentially being reduced to 100 MB by other tools ...).I have deinstalled the Kaspersky anti virus tool (reinstalled it now after several tries with no success).I have disabled (i.e. fully decrypted) the disk encryption bitlocker on all disks.

My partitions (as seen from "Mini Tool Partition Wizard" and "Disk Manager"):
Do you have any ideas on what else could be wrong?
What intrigues me most is the fact that there is no further information in the error message on what or where is missing... Read more

A:In-Place Upgrade fails with message "not enough disk space"

Hi, Mark and welcome to Ten Forums.
Have you tried to mount the ISO in File Explore, instead if using an USB stick?
I just download the current ISO here: Windows 10 ISO , mount it in File Explorer and run the setup.exe.

22 more replies
Answer Match 88.62%

I know it reduces the overall file size of the folder or file in question, but what method does it use to do this?

If you are not familiar with this phrase, it appear if you right-click on a file/folder in windows explorer and select "advanced". When selected the file/folder name will turn blue.

I need to know for some work, I have to compress some work and I could merely show myself using this feature, but explaining how it works would be better.

Thank you

A:[SOLVED] What does "Compress Contents To Save Disk Space" do?

This compression method does not reduce the "size" of a folder, it reduced the "size on disk". am I right in thinking that this compression method does not alter the code of any files, it merely stores the folder in a way which saves space on the disk?

6 more replies
Answer Match 88.62%

Hello. I am having trouble with a message in Action Center in Windows 8.1. It is saying "Check Backup Disk Space" and I cannot hide the message. I had Windows 7 File Recovery setup with Windows 8.1, but now after the upgrade, the message is "stuck." Can this be fixed? These two links explain it perfectly:

Windows 8.1 Update - Check backup disk space - Microsoft Community

Windows 8.1, can't remove "Check backup disk space" error in action center - Ars Technica OpenForum

Please help. Thanks.

A:"Check Backup Disk Space" Error Windows 8.1

See picture:

2 more replies
Answer Match 88.62%

I got the warning msg that my drive "E" (system restore) was almost full. I did a disk cleanup, and a delete all restore points (including system...). After deleting approx 25 restore points and I've deleted down to 2 currently (new ones) and the only way I could get them to go was with CCleaner, My disk now shows only 4.2 free of the setting of 10.6GB. I cannot find what it taking up over 6GB on my recovery disk. What has it gone for....? I searched the internet several hours but can't find the answer. Any help appreciated...TJ

A:Unable to increase free space on Recovery Disk "E"

System Restore points take up space on C, rather than in E or a recovery partition in my experience. A recovery partition is normally put there by the manufacturer to allow you to restore to factory specifications if needed. I wouldn't ever deliberately put anything else on a recovery partition.

Who made this PC?

Can you post a picture of Windows Disk Management so we can see a visual display of your partitions?

3 more replies
Answer Match 88.62%

when i try to run word 2007 i get the following error message:
There is not enough memory or disk space to run word 12

I have 1Gb RAM with 550Mb free and 2Ghz Turion with 7Gb free space on the system partition and 15Gb free space in the other partition

can any tell me why its doing this?

thanks
 

A:OFFICE 2007 - "Not enough Memory or Disk Space to run word 12"..?

7 more replies
Answer Match 88.62%

Hi - I keep getting the message that a backup failed due to less than 400 MB on the Windows disk. I have about 350 GB available on the disk!

Other backups have worked OK. I have seen a long thread on the Microsoft site with lots of people saying they have the same intermittent problem, but no solution. Anyone know what causes this?

I'm working Home Premium, and backup up to another hard disk on the same machine which also has lots of free space.

Thanks guys

Frances
 

A:Vista backup fails "not enough space on Windows disk"

Just a couple of simple questions, which you may have already covered.
How much space is on the C drive.(where Vista is installed)
On the 'Where do you want to save your backup' page, you are sure it is your second drive and not the 'Recovery' partition.
moper
 

2 more replies
Answer Match 88.62%

Is it possible this can do any harm to my computer?

 

A:Quick question about the option "compress drive to save disk space"

I have never knwon it to, it doesn't delete any of your wanted files, only temporary junk!
David
 

3 more replies
Answer Match 88.62%

I first notice my notebook begins to have this issue when I tried to update my Windows. It returned me with error code "80070008", which says that my computer might have run out of memory, however, there are 200GB space available
in my C: drive, and I am only using 27~30% of my RAM out of 8GB.
I tried to perform DISM 'ScanHealth' and it returned me "Error: 8 - Not enough storage is available to process this command".
At first, I tried to ignore this issue as I thought it did not cause me any major trouble. But I was wrong. Several USB devices become unresponsive (yellow exclamation icon at Device Manager).
When I tried to manually install drivers, that's when I found out it was this STORAGE insufficiency again that cause me trouble:

"Windows found driver software for your device but encountered error while attempting to install it.  - Not enough storage is available to process this command".
Some of my programs also become incredibly laggy ever since this issue arises, yet I don't know where the problem lies. 
At Event Viewer... I noticed several error messages regarding
"Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights. - DETAIL: Not enough storage is available to process this command".
I also caught a glimpse of one error that I think stated more clearly:
"Application popup: Windows - Low On Registry Space: The system has reac... Read more

More replies
Answer Match 88.2%

There's not enough disk space on drive C where Nero 7.57 is installed; but, there is on drive E. I set Nero's cache folder to E:\NeroTemp and and Windows temp and tmp environment variable to E:\Temp where there is over 100 Gigs of free space and restarted the computer; but, there is no change with Nero's insufficien-disk-space error.

And, yes, I did create those folders for drive E.

What to do?
 

A:Nero aborts with "not enough disk space" error.

9 more replies
Answer Match 88.2%

I receive daily a "Low Disk Space" error message which is incorrect and in my estimation fradulent. It goes on to give an alternative to rectify this situation by offering to "Speed up your computer and remove all viruses that are on your computer." Of course all of this is for a price. If you opt in and then change your mind before you totally commit they offer the same package for half price. I refuse to be "sucked in" by this fraudulent company.

I have gone to the internet to try and find out how I may get rid of this enemy. I have used Malwarebytes, Microsoft Security Essentials and Microsofts Security fix program all to no avail. I am at my 'wits end' trying to rid my computer of this plague. This is the url that the message comes through as. I cannot find out any source that will identify its origin: http://static.salesresourcepartners.com/g/?z=1&ilmernzkvtaztu=002618B38EDC0810&pu=cGlja3VwaG9ja2V5LmNvbQ==&s=iexplore&nm=ilmernzkvtaztu&t=aHR0cDovL3d3dy5waWNrdXBob2NrZXkuY29tL2ZvcnVtL3RvcGljLmFzcD9UT1BJQ19JRD0yODIzNw==&r=1

I need help.

Thanks,

Doug. Bell
 

A:Fake "Low Disk Space" error message

16 more replies
Answer Match 88.2%

I had the same trouble. I had never backed up my hard drive before i had kind of run into it so i figure what the hay i'll try it. It told me to back it up on the D drive or disk. (since i didn't have a disk setting there i figured i would back it up on D drive) Well after a few min. it said i didn't have enough space. So i figured Oh well. I didn't need to back it up. Well EVERY TIME I Reboot the computer now it tells me I'm low on disk space on drive D.
Now everyone know D drive doesn't have alot of space it has your system on it. But why now is it checking it all the time. When it tells me to clean it , it shows me where and there isn't anything to clean. THIS IS ANNOYING! HOW DO I MAKE IT STOP?

There is no screen to give a shot of. It's a little icon on the task bar that pops up. Than when you click on it it says delete unused files. When you click on it it gives you the list of files you can delete. BUT there is only two things on it and both are all ready empty. One is recycle bin.

A:[SOLVED] How to stop "low disk space" messages

Hi Rachel3790 and welcome to TSF !

It's better to start your own thread so that we keep one thread for one user. Here's a link to the related thread you first posted into :
http://www.techsupportforum.com/f10/...ve-182725.html

Which program did you use to backup your system drive ?

If this is an HP computer have a look at the link advised by Mon in the other thread :
http://h10025.www1.hp.com/ewfrf/wc/g...reg_R1002_USEN

Else, when disk space is running low, Windows may advise you to run the disk cleanup utility which allows you to delete temporary files and empty the recycle bin, among other things. Since this doesn't help it means that your hard drive is simply filled with your own data and the data from the programs you installed on it. The backup you just created is probably also taking some space and if you don't need it you should just delete it.

What you need to do is copy some files on CD's or DVD's, on an external drive or to another computer. You should uninstall the programs you're not using anymore using add/remove programs and you can also delete some old documents of yours in your "my document" folder if you don't need them anymore.

Be careful not to delete any system file or folder. Files that are safe to move away are video and music files. These media files usually take plenty of space and you can free that space if you burn them on CD's or DVD's and delete them from your hard drive.

If you have no idea what's using up space o... Read more

4 more replies
Answer Match 88.2%

I used Creative Lab's Wave Studio for years with a single problem.

I loaded it onto my sister's computor and the first time I tried to save a file, I got an error message saying:

"There is insufficient disk space to save (file name)."

She had several gigs of open space so I just chalked it up to something funky of her PC.

A few weeks later, my HD crashed, so I installed a new one and re-loaded my software. When I fired up my Wave Studio (version 4.02), I got the same message. Now I had roughly 75 GIGS of free space.

I'm not a newcomer to the world of software troubleshooting, but this one has me stumped.

Any help would go a long way to restoring my sanity.

Rich
 

More replies
Answer Match 88.2%

Doing some maintainence on my computer, i am considering doing this option: "Compress drive to save disk space". There is also a "compress old files" to save space

are these both the same things? (same drive)
can i undo this options? im a big fan of reformatting to undo problems in the event its challenging to undo compress a file.

thanks
 

A:"Compress drive to save disk space"

6 more replies
Answer Match 88.2%

Windows Update trying to install KB2976627, continually receiving error that I do not have enough disk space remaining to install the update. My OS Drive has 75 GB Remaining. Does anybody have any idea what causes this problem and how to remedy it?

A:Windows Update error, "not enough disk space..."

Time to do a Cleanup of your system:
Windows Update Cleanup in Windows 8

4 more replies
Answer Match 87.36%

"Not enough memory to run microsoft excel. Please close other programs and try again"
So this morning I tried to open up excel, and this message comes up. Same happens for word.
Then I try and open it again and it wants to run in safe mode, and then the same problem happens.
Then I open it again and it says "Excel failed to launch in safe mode. Do you want to start Detect and Repair?"
So I run that and it says setup completed successfully. But I try and open it and I get the original "not enough memory" message, and it's just a big loop.

I have enough memory, 3GB and I'm using office 2007 on windows 7.
It's been running fine since this morning.
 

A:"There is not enough memory or disk space to run excel"

How about diskspace that's ' memory' too.
The environment settings voor %TEMP% could be invalid?
 

3 more replies
Answer Match 87.36%

Hi

I have recurring problem, which I have noticed on PCs other than my own. The used space on my hard disk drive is approximately 5GB higher than the total of all the files on it. (It's always been around 5GB, every time I've seen it). The only thing I can do is to reformat the disk, and it will be fine for a few months, and then the same amount will "disappear" again. Disk cleanup, ccleaner, etc don't help, and it's not the recycle bin or temporary files.

It happens on my primary (Windows XP) partition, but not on the secondary partition, and last week it happened on my external hard disk after I deleted a large quantity of data.

I only have 60GB in total (30GB on the primary partition) in my laptop, and 40GB on the eternal drive, so its pretty annoying to lose 10GB. If it makes any difference, my external drive is a 2.5" laptop drive, a Hitachi Travelstar, NTFS formatted. Not sure what brand is in the laptop, but it's FAT32. But I've seen this happen on a friend's desktop too (again only on the primary partition).

Any ideas why this happens and if I can do anything about it that doesn't involve reformatting?

drawde
 

A:"Lost" hard disk space

Tell me if I'm teaching you to suck eggs, but what size blocks do you have on your drives, because without decent sub-block allocation, you'll often lose parts of blocks for files when they're smaller than the block size. Even with sub-block allocation, you'll still lose a bit because of the overheads, but 5GB seems a little steep for that size of disk.

If I compare my size of files, with size on disk, I'm losing ~1-2% of the disk. That's with the default block size of 4K. But it probably depends on the number of small file you have around the place.

After deleting a large number of files, it's probably worth-while running a disk cleaner to make all the blocks contiguous again, and that should give you back most of your space, but if they are really not getting re-allocated as free space, then I'll have to dig more.

Rich.
 

1 more replies
Answer Match 87.36%

I am trying to copy a 9gig video file to my Seagate external USB 2 drive for back-up.
The drive has 140gig available, but I keep getting the "not enough free disk space" warning when I try to move it and it will not allow it to be copied.
What am I missing? is it a format thing?
 

A:Solved: "not enough free disk space"

6 more replies
Answer Match 87.36%

I have to harddrives, drive :C/ and drive D :/ drive c has the basic miniums and came with 16 gbs of space which is completely full with windows , then drive d has 136gbs and is 103gb of free space left
ANYTHING i try to download i try to make it go to Drive D but none the less i keep getting the error "not enough disk space"

this is a brand new system, that a friend whos good with computers built for me for my gaming needs, i have a

intel r core tom 2 quad cpu 6600 @ 2.40GHz 4 gb ram 64 bit operating system..

if you can help or need any info please let me know where i can find the info for you on the computer im pretty crappy with computers so i need all the help ican get

A:keep getting "not enough disk space" with 2 hard drives

anyone have any ideas? this is getting really frustrating....

2 more replies
Answer Match 87.36%

I frequently get a notice that the disk space on my D drive is low and asking me if I want to clear up some space by using the cleaning utility that came with Windows XP Home Edition. This disk is my secondary drive and I know the space is low. Is there a way that I can get rid of this annoying notice that appears on my screen every so often? Thanks.
 

A:Solved: Notice of "Low Disk Space"

Hi referee07,

The "clean up unnecessary files" is safe to use. You can also add
choices in the list of what's to be deleted. You can also safely
remove all temporary files... Search for "*.tmp" (without quotes)
and delete those.

Also the trash bin standard setting is 10% of your drive. I would
adjust that downward to 2 % on all drives.

And, of course, you can delete some things that you really don't
need, or put them on a CD if you have a burner. Hope that helps.
 

2 more replies
Answer Match 87.36%

I'm getting the Low Disk Space message in Windows XP. Well, DUH...I knew that I was running out of room, so I bought an external hard drive with more space than I'll ever fill. Like an idiot...when I got the external.....I just went to folders...sometimes programs and used "send to" the now G: drive. Yes, I know, that was STUPID! Many of the same files are duplicated, etc so that they were copied and sent....not actually MOVED. Some of my programs don't even work correctly anymore.

I know that I can do a system restore....but I'm almost afraid that it might crash my pc. What is the easiest way to fix this problem and put everything else, except my bare essentials, on the bigger drive?

Thanks!
 

A:The dreaded "Low Disk Space" message

bumping this hoping to get some help
 

3 more replies
Answer Match 87.36%

In Explorer on Computer, is there a way to change the number of gigabytes or percentage that Windows uses before it changes from the blue bar to red? For instance, I have an array that is 1TB, but it still has over 15GB free on it, but Windows interprets that percentage as the drive being low, so the bar appears red.

To me, I don't want that bar red unless there is say, 5GB remaining, or maybe even 1GB. 15GB still goes a long way, even though it is a small fraction of 1TB.

Ideas?

A:Changing the Disk Space Bar "Low Level"

  
Quote: Originally Posted by muzicman82


In Explorer on Computer, is there a way to change the number of gigabytes or percentage that Windows uses before it changes from the blue bar to red? For instance, I have an array that is 1TB, but it still has over 15GB free on it, but Windows interprets that percentage as the drive being low, so the bar appears red.

To me, I don't want that bar red unless there is say, 5GB remaining, or maybe even 1GB. 15GB still goes a long way, even though it is a small fraction of 1TB.

Ideas?


15Gb out of 1Tb would be considered low to me.

2 more replies
Answer Match 87.36%

Hello people, I have an external 500 gigs drive with over 100 gigs free and a partition on a RAID 0 with 500 gigs free. I was trying to copy a folder with 25 gigs of data from my external hard drive to my 500 gigs partition, until at about copying 2.5 gigs, Windows shows up a warning saying that there is not enough disk space and that the file (was 500 Kb...) could not be copied. I skipped it and kept doing the same thing for every subsequent file... whats my computer's problem? I have WIndows Vista Home.
Thanks!
 

A:Solved: "There is not enough disk space" warning

16 more replies
Answer Match 87.36%

I am getting this window popping up every 2 or 3 minutes despite clicking on it and ticking the usual boxes to remove the unwanted files - 3 minutes later back pops the warning

its as if the pc doesnt know I'm actually doing it

I have followed this advice given to someone else on another site

"Insure the temp files in the hidden Local Settings folder are deleted.
Start>My Computer> Local Disk C> Computer user name> Then go to tools (at the top)> Folder Options>View and put a dot in show Hidden Files and Folders Click OK> Open the Local Setting Folder>Temp> Delete all the files you can in the temp folder.
3. Run Disk Clean from the Start>All Programs> Accessories> System Tools>Disk Clean Insure you remove all the compress old files.
4. Get Rid of the Restore points and Lesson the amount of disk space System Restore uses.
Right click on My Computer>Properties>System Restore and put a check in turn off system restore now click on the Settings Button Choose a setting of 1 - 5% click apply and OK
Go back and TURN ON system restore, insure the amount of disk space for system restore did not default to the Max amount."
but it hasn't made any difference whatsoever

could this be a virus? I ran malaware and then 'search and destroy' but that made no difference either

I have an Acer Aspire T1 2OE
 

A:incessant "low disk space" warnings

16 more replies
Answer Match 86.1%

So I bought this computer off a friend and immediately noticed it was already infected with malwares... sometimes when I click on a search result I get redirected to a random website. If I drag the link to create another tab in Firefox it usually opens the right site though. Sometimes I get popdowns as well.

In safe, safe with networking, and regular modes I've ran ESET caught a few files and deleted them, ran Stopzilla and caught a few more files so they both saying i'm clean now. Unfortunately it didn't seem to fix much and now Stopzilla tells me that there is a 'Vundo.y' infection and when i delete the files they just show back up on the scan after every reboot. I also can't install or use Mbam. I could install it a while ago, but the desktop shortcut would stop working and say that it couldn't find the .exe file. Trying to open the mbam.exe started to load it and then did nothing.

Figured I'd just re-install Windows 7, but now when I try to install it I get a error saying "There is not enough free space to store temporary Windows installation files. Try using Disk Cleanup, uninstall old programs, or move files to an external location such as a CD, DVD, or external hard drive. "

I have an Acer Aspire 5517
running Windows 7 32-bit
140Gb HD
1.6 GHz processor
3Gb of RAM

I have access to a windows boot disc

I have no idea what else to try, I'm totally stuck! Any help that you guys could give would be very very much appreciated!

DDS (Ver_10-0... Read more

A:Search engine redirects + windows 7 install "not enough free space" error bs

just did an in depth system scan with stopzilla and caught a bunch more malware files, plus went back and uninstalled utorrent so these reports are probably better than my previous ones. would have just edited them in but you can't after 30 min. apparently.


DDS (Ver_10-03-17.01) - NTFSx86
Run by Tristan at 1:47:17.70 on Sun 06/06/2010
Internet Explorer: 8.0.7600.16385 BrowserJavaVersion: 1.6.0_13
Microsoft Windows 7 Ultimate 6.1.7600.0.1252.1.1033.18.2812.1950 [GMT -7:00]


============== Running Processes ===============

C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\system32\atiesrxx.exe
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\AUDIODG.EXE
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\atieclxx.exe
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\taskeng.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Program Files\ESET\ESET NOD32 Antivirus\ekrn.exe
C:\Windows\system32\svchost.exe -k imgsvc
C:\Windows\system32\rundll32.exe
C:\Windows\system32\svchost.exe -k NetworkServiceNetworkRestricted
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\taskhost.exe
C:\Windows\syste... Read more

3 more replies
Answer Match 85.68%

After our Dell Inspiron E1505 recently crashed , Dell talked us thru diagnostics and finally sent us a replacement(refurbished) Toshiba hard drive to install in our computer. After installing it, and reloading all of the software for Windows XP, MS Office Small Business 2003, drivers and utilities, using the discs that came with the computer, we have a "Found New Hardware" window that pops up - Wizard trying to install a "Base System Device" everytime we turn the computer on. It asks for a disc but none of my existing ones seem to be the correct one. I've given it permission to connect to the Internet to "find" the software but nothing works.
Also, since the crash/re-install, our C drive only has 12.4 GBs of total disc space, and of that, only 1.2 is still free space. My D drive has about 37 GBs of disc space. Could these two problems be connected? The computer was running so slow and we would periodically get a message "low virtual memory". This weekend, I moved as many of our documents as possible to the D drive to try and free up space. It's a little better, but why do I have such a small amount of disc space? Help!
 

A:recurring message to install "base system device"-unsuccessful & low disc space

7 more replies
Answer Match 85.68%

Hi everyone,

I've been having this prblem for several months but recently it has been getting worse. I'm working on an Dell Optiplex gx280 windows xp professional sp2. Here is the problem, while I'm working on my computer (doesn't matter what I'm doing) I will get an error msg "low disk space" flash on my screen, then my monitor will shut off, but the power light on the computer stays on (sometimes flashing). I'd have to power it off and turn it back on and it would log in normally. This morning it happened 3 times, please help. Thank you in advance.

-jdaries-
 

A:"low disk space" error

6 more replies
Answer Match 85.68%

I keep getting "Low disk space" messages about one of my partitions.

First of all, what is the point of this message? I can see why it would be useful for the system drive, but for all other drives why would anyone worry about filling up a drive?

More importantly, how can I disable this message from persistently popping up every day?

A:What are "Low disk space" messages for?

Hello Marty,

It's basically just a warning to let you know that the disk/partition is extremely low on free space. This is to warn you to either clear space or get a bigger storage device soon since you could lose data, possibly everything, on the hard drive if you run out of space on it.

The tutorial below can help show you how to disable the "Low disk space" message. Low Disk Space Warning in Vista
Hope this helps,
Shawn

9 more replies
Answer Match 85.68%

One of my users was working in Corel Word Perfect 9.0 and experience an "out of disk space" error when she tried to save her work (just a small document). She was working over our TCP/IP network using Win2000 terminal server and saving to a Linux file server. I was at the server so I was able to save the file with a different name but I can't figure why she would get that error as there is plenty of space on the Linux server. Has anyone ever seen this before? Thanks
 

A:"out of disk space" error

Just a wild guess but is there possibly a setting somewhere that may limit the amount of storage space a user can use, on a user by user basis? If so, you may just need to increase the setting for that user.
 

2 more replies
Answer Match 85.68%

I have a Compaq Presario with Windows XP Home Edition. I keep receiving the above message. How do I get rid of it? Yes, I know it means I don't have enough disk space on my D Drive, but how do I fix it? It won't defragment because it needs more space (I have only 45 mgs.) My D Drive is solely for Restore so I cannot delete files from there. Can I enlarge the D Drive?

Thanks, gb
 

A:"Low Disk Space D Drive"

16 more replies
Answer Match 85.68%

Hi Everyone,

i am using CRichEditCtrl::GetLine() function to read the text from a dialog.
If my text contains any space character then it is throwing improper argument error and the application getting closed in vista only.....
What is the actual problem ????? why it is happening with vista only...?

Please suggest

More replies
Answer Match 85.68%

Dear Experts,

I have created windows image on Drive F: but delete it after some time manually due to some space prob.
But while backup shows about 40 GB only few GB space got free after deletion. When i try to again take the the backup using windows 7 backup & restore option, its still shows 35 Gb of System Image in drive F: when i brows the Manage Disc Space option but i cant find it on the same drive. (Plz see attached pic)
Plz help me to locate this and delete the same.

Thanks

A:Cant find "System Image" of 36 GB but its shows on "Manage Disc Space"

Hello sattyaji, and welcome to Seven Forums.

It may still be showing if the system image was created as part of a Windows backup. Using the tutorial below to reset Windows Backup should clear it for you, but you will need to set up your backup again afterwards.

Backup User and System Files - Reset to Default Configuration

Hope this helps,
Shawn

5 more replies
Answer Match 85.26%

Okay so I recently got my hands on a Gateway ESX E-4000 computer that needed a reformat, which I did. After the reformat I found most of my drivers with ease and stilled likewise; however, as I have experienced before, the sound driver was difficult obtain, and is proving more difficult to install.

When I attempt to install the driver it will open the soundmax install shield process, fully go through the install process and then end abruptly with and error of "Driver not found. Please restart the computer and run setup again." Nothing I have done has worked. I was surfing around last night looking for answers, and found instructions referencing me to manually add the drivers with the "Add Hardware" "Have Disk" function or something or other, but to no avail. Any Tips?

Everest to follow:

Computer:
Computer Type ACPI Uniprocessor PC
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
Internet Explorer 6.0.2900.5512
DirectX 4.09.00.0904 (DirectX 9.0c)
Computer Name CHEEKYPC
User Name Administrator
Logon Domain CHEEKYPC
Date / Time 2010-09-23 / 17:14

Motherboard:
CPU Type Intel Pentium 4, 2400 MHz (18 x 133)
Motherboard Name Intel Rexburg D845GRG (3 PCI, 1 AGP, 2 DIMM, Audio, Video)
Motherboard Chipset Intel Brookdale-G i845G
System Memory 768 MB (PC2700 DDR SDRAM)
DIMM1: 51046732117 512 MB PC2700 DDR SDRAM (2.5-3-3-7 @ 166 MHz) (2.0-3-3-6 @ 133 MHz)
DIMM2: Samsung M3 68L3223CTL-CB3 256 MB PC2700 DDR SDRAM (2.5-3-3-... Read more

More replies
Answer Match 84.84%

Please can somebody help with this minor but annoying matter. When turning on my business computer one morning, the space bar and return/enter buttons are visable when i type emails, but when i send them, they are not. I know its a setting, but can anyone tell me what setting and how to turn it off?

Thanks!

A:[SOLVED] "Space bar" and "return/enter" are visual on emails! Help

You need to tell us what email client you use as these days not everyone uses the built-in one.

4 more replies
Answer Match 84.42%

Hi Guys, any ideas how to access my external hard drive [TOSHIBA MK3029GACE] device manager can see it but it does not appear in disc management.

I use this HDD perfectly in my car HDD player. But when I try to connect it to my Laptop, it does not show up in disk management.

Please check the attached screen shot..

Thanks for the help....

A:HDD shows in "Device Manager" but not in "DiskPart"or" Disk Management

Specs show that drive has a ATA-6 interface (P-ATA, or IDE). How are you connecting this drive to your laptop? Does the laptop have a PATA or SATA connection? Does it use an adapter?

1 more replies
Answer Match 83.16%

HI,

Can anyone advise me about the following error report - from a software program please? (The pc is working fine btw):-

Windows reports that the "A2 Direct Disk Access Support Driver" device is not working properly.

The report advises to look in device manager and update the relevant driver - but device manager doesn't show any problems with any hardware.

Does anyone know what the A2 DDASD is, what it does and where to find it please?

And does anyone know what the report means and how better to check on it please?

Thank you.
 

A:Solved: "A2 Direct Disk Access Support Driver" not working

Ok so here's an update, (and the solution):

The driver in question is installed by an emsisoft anti-malware program (as part of the prog).

I had to go to device manager and click on 'show all' to see it, -that was the main problem.

Windows reprted that it wasn't working and wouldn't start (when I tried to update the driver).

So I found on the www that it was part of an emsidoft prog - which I had uninstalled ages ago.

So, in device manager click on the offending A2 DDASD (now I can see it) and select 'uninstall'.

Restart pc and all is well.

Best regards to all
 

1 more replies
Answer Match 82.74%

I downloaded the game in Winrar format on the desktop and when I tried to extract it to specific folder,I have this error message:-

There is not enough space on disk
Write error: only NTFS file system supports files larger than 4 GB

On my local C: drive I have more than 15 GB available.What do i do now?
Help is very much appreciated.
 

A:"not enough space on disk"???

Your hard disk is FAT32 format? The problem is that the file is larger then 4 gigs, so a FAT32 HD can't handle it, what u need to do is reformat ur computer so its NTSF. Except that means you will lose everything on your drive I think
 

3 more replies
Answer Match 82.74%

Can anyone suggest a remedy, please?
I recently ran a full PC recovery from my back up DVD-ROM disks. This was about the fifth time I've had to do it, due to infections, etc.
I have 3 recovery disks, but it only ran disc 1, and never asked me to put in the other two...
When I rebooted, I soon realized that I only had 1 or 2 GB of free space.
The C: drive is around 80GB in size and obviously should not be this full.
I suspect it may have to do with the partitioning, or something I did in my previous 4 system restores...
By the way, the last time my HP crashed (about 2 months ago), I got fed up with Windows and tried to install Linux, but I was never able to figure out the code or process necessary for Linux to run my wireless driver, and couldn't connect to the internet, so I reluctantly just re-installed Windows from the disc.
Can anyone help, please?

A:help with "Low Disk space"

Why not scan your hard disk with a disk space utility like showsize(showsize.com)? See what you come up with. You will be able to see the largest folders on the folder sizes report and the largest file on the Only files report (if you sort on Size column).

4 more replies
Answer Match 82.74%

I have a virus that eats up all of my available disk space. I have deleted most of my programs, and after the deletions are done, the space I made available fills right back up again. I ran (online) Norton/Symantec, trend micro house call, and AVG. I had to do it online since I need more disk space to run a resident virus program. The only way I can stop the monster from filling up any space made avalable is to delete a program and come up in safe mode. As soon as I reboot to full windows , the space I made availabe fills up. It seems to leave at least 170 to 200 Meg available. The PC is a Dell laptop with a 10 gig drive. And at this point, few programs!

More replies
Answer Match 82.74%

hi. i'm new here. nice to meet all of you!
just like a lot of folks i'm sure, i've come here because there are some weird things running on my pc that shouldnt be in there.
please help!!!!!!

heres the hijack log
(thanks in advance. i don't know much about this computer virus stuff.)
~eric

Logfile of HijackThis v1.99.1
Scan saved at 10:06:40 AM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Dantz\Retrospect\retrorun.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\ZoneLabs\vsmon.exe
C:\WINDOWS\System32\spool\drivers\w32x86\3\hpztsb09.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\SYSTEM32\qttask.exe
C:\Program Files\Java\jre1.5.0_01\bin\jusched.exe
C:\PROGRA~1\VERIZO~1\HELPSU~1\VERIZO~1.EXE
C:\PROGRA~1\VERIZO~1\HELPSU~1\SMARTB~1\MotiveSB.exe
C:\Program Files\Zone Labs\ZoneAlarm\zlclient.exe
C:\PROGRA~1\Sony\SONICS~1\SsAAD.exe
C:\Program Files\Common Files\Verizon Online\ConnMgr\cmisrv.exe
C:\Program Files\Windows Media Components\Encoder\Wmencagt.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\WINDOWS\system32\ZoneLabs\isafe.exe
C:\Program Files\Common Files\Verizon Online\AppMgr\vz... Read more

A:"windows no disk" and "winsilly" "win956temp"

11 more replies
Answer Match 82.32%

Hey everyone, here is my serious problem.

Unfortunately, I was stupid enough to let my "Free Space" on my entire computer get to less than 5 GB left. It may possibly have been at 4 or 3 GB, actually.

My computer then froze, and I went to restart it. However, it would just take me to the blue screen of death. I've tried booting it up in every way I could think of, in normal mode, in Safe Mode, with the "Repair Windows" option, and everything else. My computer will simply not get past the "Loading" screen.

On the blue screen of death, it does say "Check to see if you have adequate disk space", so I am guessing that is a big part of the problem.

But here's my question. How do I free up disk space when my computer cannot even run?

*Note: I've tried going on the BIOS and Advanced Start Up, but I can't seem to find any options that would help with my situation..*

A:BSOD: Cannot start up normally, cannot start up in Safe Mode, "Inadequate Disk Space"

Hi,

Use Ubuntu to free the space.

You can get it from here: http://www.ubuntu.com/desktop/get-ubuntu/download

Step #2 on that page shows you how to create the USB/CD.

Then once you boot into it (choose the option where it just runs off the USB/CD) you can use it to delete your files or to copy them from the Windows Drive to an external hard drive (Note: Do not copy anything to the Ubuntu Filesystem as it will not be saved on shut-down)

Regards,
Reventon

3 more replies
Answer Match 82.32%

I have almost 2 Gb of music on my computer that I'd hate to lose. And hate to have to rebuy or redownload too.

So what I'm wondering is... can I back up all that music on 3-4 700mb disks as a data disk instead of making a 70 minute music disk?

I have Sonic RecordNow that I use for music burning and data backup. I'm just wondering if it is possible to back up 1/3 of it in a folder as a data disk, and do the same for the other parts.

Possible? Would this work?

It would make much more sense to have 4 disks that although you could not PLAY them in a CD player as the songs would be stored in a folder on it, to just be able to copy them out onto another computer instead of making 20+ audio CD's.

Would my idea work? Help me out guys...
 

A:Backing up music as a "data" disk instead of a "audio" disk? Possible?

7 more replies
Answer Match 82.32%

Hi all,

Sorry to repeat a question I see a lot of instances of, but none of those seem to be addressing my problem correctly.

I have not done anything new to my computer in recent days, so this problem has caught me off guard (I see most instances of this problem come after upgrading to Windows 7, I have had Win 7 installed for a while now).

Here is a summary of my problem:
1) My computer recently got stuck on the "Starting Windows Screen." So I manually held the power button to reboot.
2) On reboot, it said there was a need to run a startup repair, which I did. Everything checked fine, except for the last one which said "System Volume on Disk is Corrupted," which it claimed to have successfully fixed.
3) After rebooting from repair, the system gets stuck on "Starting Windows Screen" for a good 10-15 minutes, after which it runs a registry check. After it completes that I get hopeful -- but the screen then gets stuck on an all black screen with just the mouse cursor and nothing more.
4) Additional note: Attempting to start the computer on "safe mode" leads safe mode startup to become stalled on "DRIVERS\CLASSPNP.SYS"
5) The lastest attempt to repair yielded this message: "Startup repair cannot repair this computer automatically.
Problem event Name: Startup Repair Offline
Problem signature 01: 6.1.7600.16385
02: 6.1.7600.16385
03: uknown
04: 21201099
05" AutoFailover
06: 2
07: Corrupt Volume
OS Version: 6.1.7600.... Read more

A:Stuck on "Starting Windows", Repair Shows "System Volume on Disk is Corrupted"

Hi Stan, Hopefully I can help you out....or at least lead you in the right direction. From my experience, the symptoms you are suggesting sound like perhaps a dying Hard drive.

1. Do you have the windows 7 boot disks that came with your computer or when you bought the Operating System? If so, you could try and insert one of those and boot from it, and attempt to repair the installation. (this won't affect your data, only the windows system files).

2. If that doesn't fix it, you could try a fresh reinstall of windows 7, and see if that works.

3. If neither of those work, its likely that because of the fact that when windows is repairing itself, it is generally putting copies of its system files in the same physical location on your disk. Because your disk is obviously not completely dead, ie....its still loading to the windows 7 startup screen, its just copying files to the bad sectors on your hard drive and gets stuck when loading. This is especially my guess because you said Safe mode is having same problems, even after attempting to repair. In the past, I've tried and salvage a disk by reformatting it and only leaving on partitions which do not contain the bad clusters. This takes some time, and some guess work.....and really this is only a "bandaid" fix because once the disk has bad clusters, its only a matter of time before these things give out. You wouldn't want to trust your important data on it anyways....

I hope this leads you in ... Read more

1 more replies
Answer Match 81.9%

hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping
pc's on - booting - then "Windows Loading Files" - restart
it's infinite i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time i tried it says : "disk error" or "disk read error"
even after i burn it to USB correctly, tried this on other pc and USB can load just fine.
i'm thinking, it's something wrong with my boot system in System Reserved, is there anyway i can do to fix this?

A:"Windows Loading Files" infinite loop, Can't Boot USB "disk error"

Hi,

Have you tried changing the boot sequence inside the BIOS?

Normally pressing F2 or F12 on the computer will solve this.

2 more replies
Answer Match 81.9%

I recently did a whole new build, new hard drive, mobo (GA-P35-DS3L/S3L) and processor. The problem is, I'm trying to install Windows 7 Ultimate and I come up with "Insert system disk and press enter" error when I try to boot from the disk. I checked the BIOS and the mobo had recognized the DVD drive and the hard drive. I tried putting the hard drive under slave and the DVD drive under master, and vice-versa. I am a high school student who generally gets lots of home work, so it would be nice to be able to type out my work. I am also a gamer, and my friend and I are trying to get my computer fixed, and it's really frustrating. I would like to get this fixed as soon as possible

Cheers!
Hans
 

A:"INSERT SYSTEM DISK" error when trying to install Windows 7 Ultimate

If the hardware is so old that you are using IDE drives, are you sure that it even will run Windows 7?

Is the DVD a full, retail version from Microsoft?
 

2 more replies
Answer Match 81.9%

Hi there
sometimes when testing new systems I have to install Office 2010 from scratch (I have a VL enterprise version so activation isn't an issue).

However Windows update then every time prompts for about 1.5GB of updates and fixed.

Does anybody know how to "slipstream" these into my office install disk - or at least store these updates manually so I don't have to keep downloading the same stuff over and over again.

(OK I've fast internet - but it's a pain to do each time).

Cheers
jimbo

A:"Slipstream" Office 2010 install disk with FIXES included

Microsoft Update Catalog






least store these updates manually so I don't have to keep downloading the same stuff over and over again



.

I used this site to save and store the updates for XP in a special folder on my HD.

5 more replies
Answer Match 81.9%

Hi,
I am trying to install Windows 7 Ultimate 64bit on to a dell xps and having a lot of problems.
The Computer has 3 harddisks
C:\ - Vista (Came preloaded With the Pc when i bought it)
D:\ Vista Recovery 10GB thing (Came preloaded With the Pc when i bought it)
F:\ Empty drive i want to install windows 7 on
J:\ Harddrive for everything else

The problem is when i boot from the disk i can start the installer but when it allows me to choose where to install to the harddrive always comes up as "Can not install blah blah, Windows can NOT boot from this Disk"

I have tried all sorts of ways to get around this like unplugging everything apart from the cd drive and harddrive i want to install it on, im getting really fed up with this. Is the problem that im trying to do a dual boot?
I also read somewhere about getting sata drivers for my motherboard but after hours of searching the web gave up.

All i can tell that my motherboard is is a FOXCONN LS36 but i can't find sata drivers for this anywhere!
On the dell website i tried all of the Sata downloads but if i locate the downloaded file whilst in win7 setup it doesn't like the file.
Am i doing some majorly wrong and stupid here?
Please help me!!!

Spud
 

More replies
Answer Match 81.9%

When I boot up my computer, after the "welcome screen" from expressgate and my ASUS motherboard I get the error:
"BOOTMGR is missing
Press Ctrl+Alt+Del to restart"

I did a search on fixes for this error and was told to insert my Windows 7 install disk into my DVD drive. I use a downloaded version of Windows 7 so I didn't have an install disk, so I downloaded a pirate .ISO of a Windows 7 install disk and burned it onto a blank DVD+R disk, and then tested it on another computer to make sure it worked normally and didn't have any malware.

I put this DVD+R into the PC with the BOOTMGR problem and restarted it, but my computer showed no sign of recognising that there were any disks in the DVD drive. I thought that the install disk must have been faulty so I tried to insert my Ubuntu DVD+R but my computer did not recognise that either.

I thought that the problem might lie in my boot order so I pressed "Del" at my motherboard and reconfigured my boot order settings so that my DVD drive was the first priority (though for some reason, my motherboard lists it as a CD drive instead of a DVD drive). I tried both DVD+R disks again and my computer still didn't recognise that I had inserted anything into my DVD+R drive; it did not prompt me to press any key to boot from the disk.

I have had this computer (put together by my brother so I have no hardware manufacturers to seek tech support from as far as I am aware) for nearly two years and I i... Read more

A:"Bootmgr is missing" Windows 7 install disk not recognised

You're positive it's a DVD drive? You've successfully read a DVD with it, and it says "DVD" somewhere on the front?

When you are again able to boot into your legit (I hope) Windows 7 you can create a bootable repair disk: Start - All Programs - Maintenance - Create a System Repair Disc.

If your BIOS includes a hard drive diagnostic I'd run that.
 

1 more replies
Answer Match 81.9%

Well, I hope this is the correct forum considering I don't actually have XP Pro installed yet!

Many moons ago (June 2004) I purchased a Dell Inspiron 8600 to take to college. It served faithfully (including after The Great Red Bull Spill of 2006) until several weeks ago when the hard drive failed. No big deal, it's mainly my Netflix computer anyway. However, I'd still like to have it back up and running, so I purchased a refurbished 40gb hard drive off Ebay. I installed the new hard drive and checked to see that it was recognized by the BIOS (it is). When I booted up the computer it said "No boot sector on hard disk. No bootable devices -- strike F1 to retry boot, F2 for setup utility." Of course, I understand that's normal because the hard drive doesn't have anything on it yet.

Here's where the problems begin.

I have the Dell-issue XP Pro installation CD. I changed the boot order in the BIOS so that it would first boot from the CD drive. However, I got the same "No boot sector on hard disk. No bootable devices -- strike F1 to retry boot, F2 for setup utility" error. Well, that CD drive has a history of acting up (despite being recognized by the BIOS), so I went out and got a USB CD drive (the kind with two USB plugs; one is for extra power I guess). Again, I changed the boot order in the BIOS to start with USB. I got the same "No boot sector on hard disk. No bootable devices -- strike F1 to retry boot, F2 for setup ut... Read more

A:Solved: "No boot sector on hard disk" while trying to install XP Pro

13 more replies
Answer Match 81.48%

Hey all,

I just bought and installed a 2TB Seagate Barracuda LP ST32000542AS hard drive in addition to my existing hard drive. It was not detected by Windows XP, although the serial number ST32000542AS showed up in BIOS.

I noticed that for a split second as i started up, there was a screen with the word "RAID" and instructions saying "press ctrl + I", so i restarted, pressed "ctrl + I" and it took to me to something that said it was for the setup of a raid disk (or something like that).

I thought, "Oh, this must be where you format the new hard drive so that it will be recognised."

So i went through a very simple menu that had me select stripe size and some other features that looked very basic an un-threatening, and then finished the RAID setup thing.

I restarted the computer, and now it says:

DISK BOOT FAILURE; INSERT SYSTEM DISK AND PRESS ENTER

At that point i had a heart attack. Can anybody help me? I have no idea what is going on.

 

A:Attempted to install 2nd hard drive; ended up with "DISK BOOT FAILURE"

8 more replies
Answer Match 81.48%

Recently my nephew's netbook has crashed. Windows 7 Starter would not load. I tried a few fixes which proved unsuccessful. Right now I am trying to install Windows 7 but am having much trouble. When the setup screen loads up and asks me to choose a partition the following items are present: Disk 0 Partition 1:RECOVERY, Disk 0 Partition 3: SYSTEM, Disk 0 Partition 3: Primary (40GB), Disk 0 Partition 4: Primary (178GB). It will not allow me to install to either Primary partition with the following reason: "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu.". I have also tried to format both the 3,4 partitions but always get an error message, although the one that had windows on is now showing nearly all memory space free. I would appreciate any help that could lead me in the right direction so I can get Windows 7 Starter installed on this computer. Thank you.

A:Trouble Installing Windows 7 "cannot install to this disk"

Have you tried running Factory Recovery from its partition? Tap the key(s) given to trigger it on first boot screen or in the User Manual for your model.

Try also deleting the last three partitions during booted Custom install using Drive Options: Clean Install Windows 7

If this fails try creating a Primary partition there and marking it Active using Step 2.2 here: SSD - HDD Optimize for Windows Reinstallation

If install still fails, wipe the HD using the above tutorial and try install again both with and within pre-partitioning. Note that the Recovery Partition will be deleted if you do this so make sure it is not working first.

You can do the operations in the last two paragraphs with a graphical interface using free Partition Wizard bootable CD.

9 more replies
Answer Match 81.48%

Heya. Windows7 recently popped up saying it was installing a Disk Drive, only problem is that I hadn't plugged anything in. Now in the device manage an Unknown device is listed.

Does anyone know of anything that could cause this and if there's any way to remove it?

A:Windows trying to install a "Disk Drive" I never plugged in.

Hello nums. Welcome to the Forum.

Things that can usually causes that is a device that is part of your system that does not have proper Plug-and-Play capabilities and does not have the correct driver installed for it, or a phantom device that was not removed from the system properly.

But before anyone here can begin to think about what it could be we will need to know what we are working with. Could you fill out your "My System Specs" under your forum profile for us? Include somewhere whether this is a laptop or desktop and don't forget to mention any connected devices or peripherals on your system.
That will help us help you.

9 more replies
Answer Match 81.48%

Hi,

Just installed XP Pro on a fresh new hard disk, same as I've done before many times. The setup was working perfectly fine all day, but now after the self test it gives the following error:

DISK BOOT ERROR, REPLACE SYSTEM DISK..(etc)

I restart the machine again with the XP install disc in the CD drive, I'll get a "Press any key to boot from CD.." message. As expected If I hit a key, it boots from the XP CD and does the usual recovery console stuff.

But here's the weird part... if I wait for the CD prompt to time out, the system actually boots from the hard disk, into my fresh XP install! What!?

For the record, my BIOS boot order is HDD0->CD->FLOPPY. I have tried the fail safe BIOS defaults. I have ran the recovery console and tried 'fixboot' and 'fixmbr'. No progress.

I should also add that my ntldr, ntdetect and boot.ini files are all fine. I tried replacing them from a good machine, but no effect.

Hardware is all fine, it works if I put in another HD and boot from that.

Ran out of options now. Can anyone suggest some more?

David

A:"disk boot error" on fresh install

http://www.pcguide.com/ts/x/sys/booterrGBER13-c.html
http://support.microsoft.com/kb/q128730/

4 more replies
Answer Match 81.48%

Hello, TSG!

Just yesterday I was using the computer normally until I got a Blue Screen. Getting a blue screen is usually something normal that occurs to my every so often, so I didn't mind it and rebooted the computer normally. However, I got two more blue screens within the next hour. The 3rd time rebooting, my computer starts to act strange as if it had a virus. Upon powering up the monitor would just display a black screen with two lines about something --- which I don't remember, sorry --- and stayed like that unless I plugged out the power cord or held on the power button to shut down. Then when after a few tries it boots and displays a message "Floppy Disk Failure" and "Drive 1 not found: Serial ATA, SATA-1" (and the same message for Drives 2 and 3) show up. Also it asks me to continue loading by pressing the F1 Key.

When Windows loads the first time, it displays a message saying a bunch of hardware has just been installed and ready for use. Also, my internal clock resetted itself back to Monday, November 07, 2005 (Which, if I recall, is the date when I got the computer) and my speakers do not work.

TL;DR Version
3 blue screens within a short time
Floppy disk fail
Drivers 1-3 not found: Serial ATA, SATA-1-3

Anyway, I browsed through Google but I haven't seen anyone with both problems. I disabled my Floppy Disk Drive and that message doesn't show up anymore, but the others do and my computer still isn't fixed. I ran a vir... Read more

A:Solved: "Floppy Disk Failure" and "Drive 1 not found" problem

9 more replies
Answer Match 81.48%

I have a big problem here,
I have used my hard disk for 9month,
Yesterday when I watched movie on the half way,
My hard disk suddenly disfuntion,
And I thought my laptop problem due to always lagging so I restart my computer.
But after that I can't read my hard disk (WD)in my computer.
It can read in computer management there.

Ways I try:
1)I try to uninstall and reinstalled again,BUT it doesn't work.
2)I try to unchecked the hide folder and device at view.
3)I try to update the software BUT it still disfunction.
4)I try to use disk management and initialized it BUT there appeared CANNOT INITIALIZED Due to I/O device error.

Any solution for me ?

A:Hard Disk can't read in "my computer ", "initialized",I/O device error

The most usual cause is that the Hard Drive is beginning to fail. Back up your stuff. Go to the website of the manufacturer and test the drive.

8 more replies
Answer Match 81.06%

I can't "extend" my "C" Drive even tho there is free space??
 
I have 251GB free and I cant add it to my C OS drive?
 
Picture:
 
http://img577.imageshack.us/img577/7577/helpc.png

A:I can't "extend" my "C" Drive even tho there is free space??

The Free Space is in an Extended partition.
Right click on the free space and delete the Extended partition. You can then extend the C partition into the Unallocated space released.

20 more replies
Answer Match 80.64%

I have a Yiynova tablet monitor and its been working fine for about a month. I recently tried to download the beta version of a NVIDIA GeForce update (bad idea) and had to reinstall a previous version. After that, things started to go south for my tablet.

I uninstalled and reinstalled the tablet driver, and tried to plug it in a different USB port and it came up with the same message.

Is there a step that I'm missing?

I have dual screen setup, and that's working fine, but the driver that senses the pen just isn't installing, even though I installed the driver program.

I appreciate any ideas on how to fix this.

A:Yiynova tablet monitor "device driver failed to install"

The problem wasn't solved, but I believed I narrowed down the problem. The driver doesn't seem to fully install.

1 more replies
Answer Match 80.64%

Hey all!

I have a wweeeiiird problem. It started with that my screen looked all messed up after booting up (once past the win xp logo, when the video card driver kicks in i suppose). It looked like horisontal lines all over the screen (not moving, frozen...) and i had to restart. Once restarted everything worked fine. This happened a few times (two or three i think). But finally it didnt help to restart, so i started up in safe mode and uninstalled my video card. I actually removed the card (ati radeon 9800 pro) and put in my old one (3d prophet 4500) just to be sure nothing happened to my expencive radon card. Then it worked booting up normally. XP found the card and tried to install it. It didnt work properly, it said. So I had a look in the device manager. There I found that the AGP bridge to pci or something had one of those yellow bad-signs on it. Two other devices (also under "system devices") named "PCI Standard PCI-to-PCI bridge" had the same yellow sign. Looking under properties it says this:

"This device cannot find enough free resources that it can use. (Code 12)

If you want to use this device, you will need to disable one of the other devices on this system."

I uninstalled the AGP bridge (whatever that one was called) so that one isnt in the list of system devices any more. Now its just two of the other type I mentioned above.

I've tried to find info about this problem by surfing around, but I haven't found a... Read more

A:Can't install ANY video card driver, it says "not enough resources" in device manager

Hey man

Hey...

Lol, this comes from runnig a Ati card on a Nvidia nForce chipset! no just kidding ...
Anyway seems like you screwed windows up beyond recognition :blackeye: ....]
There is an easy solution and a difficult one..
The easiest way to fix your problem and establish if you don't have any other combinations of problems is:
1) Find a loan hard drive to reinstall a fresh copy of windows with your new display card inside, or plunge right into it and reinstall windows on your current HD... remember to install the nForce drivers before anything else. While you at it remove any other pci cards that might be the cause of your problems.
2) If your PC crashes during the reinstallation you definately have a hardware problem, try your original display card again.
3) If you have two ram modules, remove one, test, swop them, test.
4) If your problem persists after this I recommend testing the card on another pc... if available. It could be a faulty display card...
5) I presume your pc worked fine before the new display cards installation.
6) If the display card works on another pc you have a compatibility issue (very nasty) on your hands, take it to a pc vendor near you to sort it out.

Good luck!....
 

1 more replies
Answer Match 80.64%

hye
I'm having this problem since few months ago. before I had installed a software named VMWare for my college's assignment in order for me to use Linux Ubuntu. but apparently it gave me a lot of problems until I decided to uninstall the software. after I uninstalled, all NEW USB devices such as external HD, flash drives and etc cannot be detected and windows always prompt "Found New Hardware" pop up message and require my windows to install driver software for my USB devices. I tried clicked the "Locate and install driver software (recommended)" but it still prompt out again the message. it happened for all new USB devices. I don't know why. maybe it happened after I installed the VMWare, I guess?

can someone help me with this? I cannot use my new flash drives and external HD for me to transfer my works. it's so tiring
 

A:Always prompted with "found new hardware" to install driver software for any USB device

Have you tried reinstalling the chipset drivers, which would generally be responsible for USB support?
 

40 more replies
Answer Match 80.64%

Hey guys,

My dad recently bought a HP Windows 8 laptop but can't get used to the new OS. He asked me to install Windows 7 on it for him. I'm currently trying to get the drivers sorted for it and for the Windows drivers such as Chipset and Graphics, i'm getting the error "This computer does not meet the minimum requirements for installing the software" which doesn't make sense as the specs of the laptop are:

Win 7 Ultimate X64
6GB Ram
1TB HDD
Intel Core i5-4200U 1.60 GHz
Intel HD GFX

I can't get the drivers of the manufacturers website since they are all of course Windows 8 drivers.

What do i do to fix this??
Thanks

A:Driver Install Error "Computer doesn't meet requirements"

Hi Welcome to Seven Forums .. What is the Model Number of the Computer ? .. Have you tried the Windows 8 Drivers ?

9 more replies
Answer Match 80.64%

anyone please help me before this i'm able to format my laptop into windows 7 ultimate x64 bit but now when i'm trying to format using the same dvd windows installer a message prevent me from format "required cd/dvd drive device driver is missing". i also downloaded a new iso and burn it into a new dvd and also usb but both with the same results. then i borrowed my friend dvd installer and it works i can install windows. now i want to format it again download a new iso but that error still prevents me from installing new windows help please

A:"A required CD/DVD drive device driver is missing" error install win

What operation system did your Laptop come with?

Where are you downloading the ISO for Windows 7 from?

3 more replies
Answer Match 80.64%

I formatted my computer, installed winxp sp2 and the driver for my multimedia device was lost, i ran everest to check what it was and its SiS 7012 audio device, an odd thing was when it said my motherboard name is unknown, its a laptop.
I downloaded different drivers but non of them were succesful, i tried installing one and a failure error pop up, "failed to install driver for windows xp" (check link or thumbnail), i tried installing winme.exe for windows ME driver but it didnt work, tried changing install directories but didnt work either. i donwloaded drivers from SIS home page but didnt work either. please help, i am most concerned about my sound device rather than the mother board, here are my specs.

http://img211.imageshack.us/my.php?image=failed2wm.jpg

Computer:
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 2
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard:
CPU Type Intel Pentium 4, 2600 MHz (13 x 200)
Motherboard Name Unknown
Motherboard Chipset SiS 648FX
System Memory 512 MB (PC2700 DDR SDRAM)
BIOS Type AMI (01/12/04)
Communication Port ECP Printer Port (LPT1)
Display:
Video Adapter ATI Mobility Radeon 9600/9700 (M10/M11)
3D Accelerator ATI Mobility Radeon 9600/9700 (M10/M11)
Multimedia:
Audio Adapter SiS 7012 Audio Device
Storage:
IDE Controller SiS PCI IDE Controller
Disk Drive TOSHIBA MK602... Read more

A:SiS 7012 audio device "failed to install driver for Windows XP"

Hello and welcome to Techspot.

Go to your laptop manufacturers website. You should be able to get your drivers there.

Regards Howard :wave: :wave:
 

14 more replies
Answer Match 80.64%

Acer E1-571: Windows 8.1, 2.4 GHz Intel i3, 8 GB ram, Intel HD 4000

So I recently recovered my computer from corrupt display drivers by booting into safe mode and uninstalling the bad drivers. So Windows is working good as ever except the fact that I have no official drivers installed. So I downloaded the latest drivers from the Intel website and when I try to install the drivers from Device Manager it gives me an error saying the "configuration registry database" is corrupt. I tried running the installer from safe mode and even tried older drivers to no avail. I also backed up my registry and ran Ccleaner on it. Is there anything else I can do? I sadly don't have any restore points for it. Thanks in advance.

A:Can't install display driver "configuration registry database corrupt"

See if this tutorial helps: SFC /SCANNOW Command - System File Checker

1 more replies
Answer Match 80.64%

Running Windows 7 pro sp1 on Acer Aspire one ZG5. I don't get it. All hardware has always worked after I replaced winXP with win7 pro on this netbook. (clean full install from bootable flash drive) Then one day recently all the sudden I have "other devices" - 6 of them, listed as "base system device" and action center is telling me "install your memory card reader driver" (of course windows update doesn't find drivers).

Here's the thing, my memory card reader works fine, both of them, and I can use them just fine. In fact, everything works as it always has so I can't figure out what the heck these "other devices" are that suddenly appeared out of nowhere for no reason. When I check device ID's each one has 4 device ID's listed. Not sure if all 6 instances of "base system device" have the same 4 device ID's listed or not but I am showing you what's under one of them.

Why would windows action center be telling me install memory card reader drivers if the readers already work and so apparently already have drivers? Does anyone have any idea what the heck is going on? All my hardware works, so how can there be drivers missing? This just doesn't make any sense to me.


 

A:"Install your memory card reader driver" but it is installed and works

11 more replies
Answer Match 80.64%

I'm at a loss as to how to get rid of install wizard message, "Found New Hardware - Windows needs to install driver softwarefor Universal Serial Bus (USB) Controller". Remains on desktop.  My printer is USB attached and working fine.  I've been into the Device Manager and tried seemingly everything possible...with NO success.  Desperate for help...thanks!

A:Message,"Found New Hardware-Windows needs to install driver software for USB Co"

You are using Vista? How long has the problem beenwith you?What printer do you have? Some all-in-one printers require install of up to three devices to be complete.

7 more replies
Answer Match 80.64%

Hi,

I have two problems, one which may have triggered the other or both of which may be due to another fault on my P.C.

I tried to install all the software supplied with my Epson DX7000F multi-function printer, but hit a problem: the Scanner Driver (EPSON Scan) won’t install. I'm presented with a dialogue box stating:

"EPSON Scan Setup
Could not copy files. Check the setup disc, then run setup again.
C:\DOCUME~1\[User name]\LOCALS~1\Temp\\setup.exe"

When I try the EPSON Scan drivers from Epson's site (Epson Scan 2.9g (epson30825eu.exe) and Epson Scan 2.9m (epson317960eu.exe)), I get a similar error:

"EPSON Scan Setup
Could not copy...
C:\DOCUME~1\[User name]\LOCALS~1\Temp\\escore.cab"

As this driver hasn’t installed, the P.C. doesn’t seem to fully recognise the printer, viewing it as "Removable Hardware", and, every time I boot, I'm presented with the "Found New Hardware Wizard".

The rest of the drivers and printing software installed without a problem, but I decided to uninstall everything (using Revo Uninstaller), anyway.
The first time I booted, after installing the drivers, etc., and every time since, I got and get a "Server Busy" box:

"Server Busy:
This action cannot be completed because the other program is busy.
Choose ‘Switch To’ to activate the busy program and correct the problem."

Clicking "Switch To..." opens the Start menu only; closing the menu, removes the dialogu... Read more

A:"Server Busy" dialogue box; printer driver won't install

Bump.
I hope this is what I'm supposed to do.
Thanks.
 

3 more replies
Answer Match 80.64%

The problem was the Multimedia Audio Controller. It was flagged in device manager. I downloaded the file from HP's website and installed it.

Thanks!

Tommy4024
 

More replies
Answer Match 80.64%

I am using Windows XP SP 2 in a desktop PC. But I wanted to install Windows 7 to my computer. So I got a dvd and during installing it from boot from dvd mode, first I get the "select language and time" dialog box, I click next and then this message appears -
"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now."
I read many threads on the internet regarding this problem, but I didn't try any of those in fear that I might misunderstand something and worsen the condition.
Can anyone give me a step by step info on what to do?
If you need any extra information please ask.

A:"A required CD/DVD drive device driver is missing" during install

Take a look at these posts:
Windows 7 Installation Errors : Troubleshoot Step by Step
Common Installation Problems and Their Solutions
Questions to use for help with Installation Issues
Tutorial quick reference list for Installing Windows 7

1 more replies
Answer Match 80.64%

Hello,

I am new at the forums and I have a problem, I bought a linksys wireless adapter thinking it would work for my new vista computer 64 bit. Had problems with it connecting to internet, called support, told me to reinstall it, first time somehow I was able to install it, second time when trying to reinstall it wouldnt install! So i returned it to the store. Bought a D-Link Xtreme N Desktop Adapter. Tried installing driver, could not install it, when setup is complete it says "Couldn't find adapter, please insert adapter now" Called D-link support , told me to try it on my other xp computer, seemed to work perfectly there, but again I need it for my vista computer. Any ideas how to fix this problem? I need my internet to work.

Model No: DWA-552
H/W VER:A1
F/W VER: 1.10

If you need anymore information from me to find the answer, please let me know, thank you.

A:D-Link Driver install problem "adapter not found"

Have you made sure its in the pci slot all the way.

3 more replies
Answer Match 80.64%

Hello.

I recently bought a new Sata 3 Hard Drive (500gb Sata 3 Barccuda) for my PC.
I've downloaded countless Windows 7 ISO's. I have a LEGIT key. After burning it on ImgBurn, Nero and Poweriso at 4x and 3.5 (Can't go lower than 3.5) It gets to the Language setup after 30minutes or so, Than a futher hour to get to driver selectio, but once on driver selection it tells me "No device driver found", I've tried lots of seperate ISO's and even Vista!

I've been trying to fix this since Friday and everything I've tried doesn't work. I've even tried using a USB. Please, Help is extremely appreciated!

SPECS

Mobo: Ga-Ma770-Ds3
CPU: AMD 6000+ 3.01ghz X2 Dual core
RAM: 1gb x 4 (4gb)
GPU: Nvidia Geforce 550TI 1gb

I don't know if it helps but I use TDK 4.7gb CDS.

A:Windows 7/Vista Install "No Device Driver found"

please help

2 more replies
Answer Match 80.64%

Tried everything and by everything, i do mean everything. spent close to a week frying my brains on this problem. after getting to the select language and input screen, it loads and then goes to a screen saying that the required CD/DVD driver is missing. tried different OS, windows 7 home, home premium, ultimate and proffesional. it all ends up with missing drivers. i mount/burn them onto a 4gb scandisk cruzer blade. i actually managed to install it the same exact way, via that thumb drive. and by some freak problem, had to format everything. even the os. so all i hav now is an empty hard drive, bios setting and my bootable usb drive.i set the bios to AHCI and vice versa to IDE. i dont have RAID though. i tried installing a AHCI controller from the driver disk that came with my notebook but to no succes. tried searching for my hard drive driver even though my bios recognizes it. im really at my wits end here. my notebook is an Asus Pro36sd or U36sd.. hard disk is a fujitsu mhz2250bj g2.. please help guys..

A:"A required CD/DVD drive device driver is missing" during install

That message is usually an indication of a corrupt installer.

Try downloading a clean, official ISO:

Clean Reinstall - Factory OEM Windows 7

5 more replies
Answer Match 80.64%

Hello everyone, first post and thread!

After many hours today looking for answers to this problem in many threads (and websites), I've finally decided to post to get some help from you guys! Any help would be greatly appreciated.

I have just finished building a new desktop, here is the config:


Intel Core i5-2500K
ASUS P8P67 Pro, Intel P67
CORSAIR Dominator CMP8GX3M2A1600C9 2x 4GB
OCZ Vertex II Series SATA II 2.5" SSD, 60GB
SAMSUNG Spinpoint F3 1.0TB
SAPPHIRE HD 6950 2GB
Fractal Design Define R3
CORSAIR HX750
SONY OPTIARC AD-7260S SATA, DVD?RW


Using access to MSDN-AA, I got an ISO and key for Windows 7 Pro x64 (DVD - English). I then burnt the ISO to a DVD using my current computer, a WinXP 6 year old ACER laptop. When trying to do the clean install of Win 7 Pro on the new desktop, the installer starts up fine, but after choosing my language and regional settings, I get the famous "A required CD/DVD device driver is missing" error.

Here are the things I have tried, in vain:

1) Installing the various available SATA drivers from the ASUS motherboard DVD. This doesn't help and gives a "No new devices could be found" error.
2) Reburning the ISO with ImgBurn at 2.4x speed with verify on.
3) Redownloading the ISO from MSDN-AA and reburning the new ISO at 2.4x speed.

Note that I would have tried to make a bootable flashdrive of the ISO (using this guide: Install Windows 7 From USB Drive/Pen Drive ) but since I'm on Win XP o... Read more

A:"A required CD/DVD device driver is missing" during Win7 Install

Use the MS Download tool to write ISO to flash stick: Windows 7 USB/DVD Download Tool

If this fails, check the HASH against official: http://www.dasmirnov.net/blog/window...-hash-checksum

Make sure you have the latest BIOS update, or reset the CMOS. Set SATA controller to AHCI first, then IDE if that fails.

Remove all but 2gb of RAM to try install, swap RAM, test RAM if necessary.

If HD is used, wipe it with zeroes before install: SSD / HDD : Optimize for Windows Reinstallation

8 more replies
Answer Match 80.64%

I've been trying to install Windows 7 on my Asus Q501L (which came with W8 already installed) via USB. I faced a problem - while the laptop was able to start the initials steps (the black screen where it shows the copying process of the Windows 7 files), i couldn't go any further than the step at which i need to choose a partition to install the OS on.

It simply says " A required CD/DVD device driver is missing" - when you start Windows 7 or Windows Vista from the setup disk". I tried Shift-F10 to start the CMD and format the HDD (NTFS format) on the spot, restarted, same error message. I disabled Fast Boot in the BIOS, the SATA controller is set to AHCI. I tried several topics @ Tom's Hardware forum, and elsewhere but i still cant find a definitive answer.

I read that maybe i should change the AHCI controller to IDE, only issue i face is that in BIOS i get no options - there's only AHCI as a choice, no IDE, no RAID.
Any Ideas? How do i get IDE controller option to appear in the BIOS settings (via the registry keys, or maybe i need to download that IDE controller (not sure if thats possible)) from the Intel's website (intel core i5 is the CPU of my laptop if that's of any help)?

Thank you

A:"A required CD/DVD device driver is missing" upon windows 7 install

Check out this tutorial Windows 7 Installation Failure - Overcome
May give you some ideas regards uefi bios

4 more replies
Answer Match 80.64%

I'm getting:

"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now."

Google has loads of hits for this but for W7, XP, Vista, etc. nothing for W8...

Trying to install W8x64 on a Dell Precision T5500 (single CPU, 12GB RAM) via USB flash drive.

The CPU is an Intel "confidential" (developer's Xeon 5600 series) could that be it?

The same bootable USB flash drive was able to install W8 on two VM's so far so I know the image is good (or not corrupt).

Is there a way to try and find this elsewhere or point me to the correct driver from an existing install of W8?

Thanks for any help!

A:"Load Driver" During Install - what driver & where can I find?

The CPU is an Intel "confidential" (developer's Xeon 5600 series) could that be it?



I'm quite sure that the CPU is not the problem...

It happened to me once and I had to change the DVD drive to install WDP on a Megaware rig...

27 more replies
Answer Match 80.64%

Iv been searching the net and trying a few things but i am still yet to solve the problem so i though i try the techguyforums as iv had reliable fix's from here in the past.

My problem started when my system was running xp stable, then all my files got corrupt, anything i installed would become corrupt, i even tried to install Vista x86 keeping the windows files in windows.old to not loose my data but the vista install became corrupt.

I used a disk to format the hd to ntfs, but after this i received "A kernel file is missing from the disk. Insert a system diskette and restart the system" and no boot.
I tried deleting the partition then formatting to ntfs again but now i receive the error "DISK BOOT FAILURE - INSERT SYSTEM DISK AND PRESS ENTER"

when i insert my XP disk the error message just pop's up again, Iv tried inserting the vista disk but the same error is displayed. Iv tried deleted the partition and using the system disk with the unpartitioned drive but the error remains the same.

Anyone have any suggestions to try?

Thanks in advance
-David-
 

A:Cant install any OS, "disk boot failure"

6 more replies