Tech Problem Aggregator

error while unpacking program, Code 2

Q: error while unpacking program, Code 2

Switched my web browser yesterday to MSNBC. Get an error message while in there "error while unpacking program, Code 2 Please report to author????????

More replies
Answer Match 99.96%

Error while unpacking program, code LP5. Please report to author.

A:Error while unpacking program, code LP5. Please report to author.

You are going to have to provide a lot more detail in order for anyone to be able to answer your question. Please include as much information as you can in your posts.

2 more replies
Answer Match 99.96%

how do i stop this message from coming on my computer all the time?

Error while unpacking program, code 2. Please report to author.

A:Error while unpacking program, code 2. Please report to author.

was there a reply posted ?

[email protected]

2 more replies
Answer Match 99.96%

The captioned message appears whenever I try to update my antispyware application, so preventing it. When I stopped the firewall and runned a sfc /scannow and corrected 3 or 4 system files, it did open, but no more after reopening the firewall.

A:Error while unpacking program, code 2. Please report to author.

You may have other Spyware issues. First you can disable the Firewall. If the Spyware program opens then it has it's own Firewall that conflicts with Windows. You should also download CCleaner delete temp files, run Registry Cleaner too. Then download malwarebytes run full scan delete nasties.

9 more replies
Answer Match 58.8%

I changed my os to win 7 64 bit, I'm trying to install microsoft 2010 office 64bit from an online link. it downloaded and goes to unpack when I get an error while it's checking crc. It stops and the error says insufficient disk space or errors on disk. I have 80gb free on my drive. and I cleaned the disk from previous installs. Stuck?? Please help

A:online install error in unpacking download while checking crc

Downloaded from what online link?

The last I heard, 32-bit was the recommended version even for 64-bit systems?

Choose the 32-bit or 64-bit version of Office - Word - Office.com

2 more replies
Answer Match 54.6%

I have installed this program called social.im, which is a secondary application (not an official application from facebook) designed for facebook. After trying out the program for a few seconds, I tried to uninstall the program, however, for some reason I was notified of an error which looked like this.

What does it mean when the uninstaller gives you an error code of 2753? I don't think the error itself is from the program, but it is from windows and it's having trouble with it.

Any help would be greatly appreciated. Thank you.
 

A:Problem uninstalling a program - error code 2753

ccssdxdx,

I'm one of the developers of social.im and am sorry that uninstalling the application is giving you trouble. Can you check if the C:\Program Files\social.im directory is still on your machine? If so, deleting it will remove social.im from your machine. I hope this helps!

-Yanda-
[email protected]
 

2 more replies
Answer Match 54.6%

When trying to run the backup program, the program tries to run and then stops 10 seconds in, and gives this error code. What do I need to do to? Running Win 7 RC 7100 - x64 edition

More replies
Answer Match 49.14%

Ok - I'm trying to fix my friends' computer - Toshiba Satellite L455-S5975 running Windows 7 32-bit

Windows firewall is off and I need to "Update Firewall Settings". When I click use recommended settings, I get a message that says it "can't change some of your settings. Error code 0x80070424" I get the same thing when I click on "Turn Windows Firewall on or off" and "Restore Defaults"

When I click on "Advanced Settings" I get "There was an error opening the Windows Firewall with Advanced Security snap-in" followed by it "failed to load. Restart the Windows Firewall service on the computer you are managing. Error code 0x6D9."

I scanned the computer using both Avast and Microsoft Safety Scanner (full scan and took over 2 hours) - no infections or issues found

I installed all Microsoft updates and followed suggested restarts.

I ran Microsoft Fix It and I get a message that the firewall isn't running or stopped and it can't be fixed.

I have gone into services as an administrator to try and start Windows Firewall...it isn't there - not in the list of services (local)

I also used SlimDrivers to update all the drivers on the computer.

What I am not seeing is how to uninstall and reinstall Windows Firewall...any other program or hardware issue, that would seem to be the easiest solution - but I have yet to see how to do that with Windows Firewall.

I even started the computer in safe mode... Read more

A:Win7 Firewall won't turn on error code 0x6D9 and error code 0x80070424

What other Anti-virus was on the computer before Avast?

3 more replies
Answer Match 48.3%

Computer model: Panasonic Toughbook CF-31
OS: Windows 7 SP1
Processor: Intel Core i5-2540M CPU @ 2.60GHz 2.60GHz
RAM: 4 GB (3.89 GB usable)
System type: 64-bit

CBS Log
CBS.zip - Google Drive

I ran the SURT tool Windows6.1-KB947821-v34-x64.msu.
Ran fine, no problem.

Ran sfc /scannow
"Verification 100%"
"Windows Resource Protection could not perform the requested operation."

Also ran
Malwarebytes
JRT.exe
Adwcleaner
Hitmanpro_x64

I still get the "Windows Update Error, Error Code 80070643, Code 9C57"

A:Windows Update Error, Error Code 80070643, Code 9C57

Hi Qpuser,
lookin at your logs
couple of questions
Are you dual booting or have the OS on your D drive/partition.
can you also run, in following order

http://www.sysnative.com/niemiro/apps/SFCFix.exe
http://go.microsoft.com/fwlink/?LinkID=52012
and sfc /scannow

copy/paste the results please.

Roy

1 more replies
Answer Match 47.88%

I'm trying to install Renaissance Starter Edition, but the program just unpacks the files somewhere, and doesn't actually start the installation routine. I tried it at work, and it started installing, but on my PC at home, it unpacks the files, then nothing. It goes that fast, I don't know what the files are, or where it's put them. Any suggestions?
 

More replies
Answer Match 47.88%

I've downloaded a large application (Quicken) in .rar format. I extracted it with Winrar and now I have 18 tidy little bundles of 15mb each in the intended directory. Bad news is I haven't the faintest idea what to do with them now. there aren't any .exe or installation files as far as I can see--just those 18 bundles. Can anyone straighten me out?
 

A:Unpacking .rar

11 more replies
Answer Match 47.46%

Hello,

Yesterday I downloaded windows.iso via the Media Creation Tool (it took 8 hours!!). I clicked it today to unpack its contents and failed because an error message told me that there is no program associated with it. I panicked and associated it with Windows Media Player but am scared stiff to use it or do anything. Can anyone help please?

Herefordian

A:Unpacking windows.iso

Hi,

You can use the free program 7-zip to extract iso (and other) files: 7-Zip

7 more replies
Answer Match 47.46%

Hello everyone
It's a long time since I don't write an article in MA but I decided to explore some important concepts to analyze malware.

"Understanding packers and detecting a packed file" is a topic treated by @kram7750 in this thread :http://malwaretips.com/threads/malw...ng-packers-and-detecting-a-packed-file.42356/

I will talk to unpacking
The manual unpacking is definitely the most complex to learn. Although a malware can be sometimes much more difficult by a packer, it is much easier to explain the theory behind a malware, rather than explain the operation of a packer. This is primarily due to two reasons. First, you need to have a unpacking knowledge of a wider number of arguments: it is not enough to understand the machine code and know that debugging. In addition, the term "packer" is very generic. The packer implement all sorts of anti-reversing techniques and even an entire book would suffice to explain them all in detail.

I will try to make myself understood even by those who don't have a clue what a packer. However, it is useless to deny that you have to engage, and not just to see this introduction. Do not confuse, even if there are other threads, this article represents the real end of our route. If you include the following, all the rest you'll learn without difficulty and it will update your knowledge base package. Here, we define the article on manual unpacking the culmination of knowledge. To write this introd... Read more

More replies
Answer Match 47.46%

I recently ordered a new PC from ironsidecomputers and it didn't work when I plugged it in, I later pulled the front connectors loose replugged them and was able to get it running but the reset powered it on power button reset the system. I was happy but PC was in the wrong spot so I turned it off put it where it need to be and nothing I tried all other outlets then the one that worked previously but nothing. I referred to manual and seemed original set up was wrong but I'm not getting to work in the right set up. What am I doing wrong is it just power problem? I would be talking to tech but it's the weekend. Motherboard is as rock z97 pro 3, Intel core I5 4590 processor, evga 500 watt, nvadia GeForce Gtx 750ti graphics card, 8 ram, win 10, enermax thorax case

A:PC has no power after unpacking

Sounds like to me the front panel connection is hooked up wrong, which could do some damage to the system over time. If your not comfortable taking it apart and reconnecting all if it, I'd wait and take it back to the place where you bought it and have them look at it and fix it.

1 more replies
Answer Match 47.46%

Hi,

I've downloaded a ad-supported free full game, "Prince of Persia The Sands of Time", and it's installation file don't work ("internal error").

How can I extract it's content without using the installer?
 

A:Unpacking an EXE file

10 more replies
Answer Match 47.04%

Hi All,
I'm new here and I think I messed up the post that I made. I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it. Has anyone else ever had this problem and if so, were they able to come up with a solution? Thank you. This is my first day on the site and unsure how to get around on it, but it seems like it's an exciting site and I'm looking forward to using it.
Thanks,
Miket797

A:Windows Installer, Error Code 8007641 or error code 641

DownloadmsiserverLaunch it,click YESRestart the PC and try to updateIf you still have issuesDownloadmini toolboxCheckmark following boxes: List last 10 Event Viewer log List Installed ProgramsClick Go and post the result.

2 more replies
Answer Match 47.04%

This is a desktop PC with Windows 7 Ultimate 64 bit installed. I'm trying to repair with the disk it was installed with originally. The reason for attempting the repair is that the System File Checker says there are files that it could not repair when I ran it. I ran it originally because I couldn't install or uninstall anything. I would get an error: This application was unable to start correctly. With error message (0xC0000006)

Now trying to repair Windows 7 with the upgrade option I get:
Windows was unable to create a required installation folder. Please reconfigure your boot.wim to use the flag 9 settings for the first image and restart your installation. Error Code: 0x803002f

Any help greatly appreciated....

A:Started with error code 0xC0000006 and now I have Error Code: 0x803002

You may need to attempt SFC up to 3 times to repair damaged System Files. But first disinfect per Troubleshooting Steps for Windows 7. If there is any problem go with the bootable scans in Troubleshooting Windows 7 Failure to Start as the OS may be in the death grip of infection.

Then SFC may run better from the Win7 installation media or System Repair Disk Command Line: SFC /SCANNOW Run in Command Prompt at Boot.

If these fail then you can try the Repair Install after establishing a Clean Boot per Troubleshooting Steps for Windows 7.

But you may be better off copying out your files to quarantine to follow these same steps for a perfect Clean Reinstall - Factory OEM Windows 7 which compiles everything that works best in tens of thousands of installs we've helped with here.

1 more replies
Answer Match 47.04%

No-one replied to this post and so the problem was never fixed.
(The updates continued to fail downloading or installing)
I upgraded to Windows 10 Home and thankfully didn't need to have the updates installed to upgrade.

Back in April this year I downloaded two important updates:

1) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3023222)

2) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3032663)

However during the installation I encountered Error Code: 80073712
I tryed the installation again without anything else open and still the same result
I tryed the installation again having restarted and still the same result
I tryed the installation again after running the DISM Tool and still the same result

Yesterday (17/7/15) I tryed to download another important update:

1) Security Update for Windows 8.1 for x64-based Systems (KB3004365)

However during the download I encountered Error Code: 800F081F
I tryed everything that I tryed previously and still the same result

I searched around and both of these error codes apparently mean that a file needed by Windows Update is either damaged or missing

I thought I might as-well start a thread about it on these forums as not being able to download/install security updates isn't a good thing

Please Reply!

More replies
Answer Match 47.04%

Boot configuration data file is missing some required informationFile   BCDError Code oxc000000d Any fixes for this? Computer wont start up. Worked fine this morning. Got this message this afternoon.










Solved!
Go to Solution.

A:Error code oxc000000d acer aspire R14 error code o...

First of all try to check if ALT+F10 at boot take you to windows recovery and you can reach command prompt from there:troubleshoot-advanced options- command prompt (if this works, go to point 4, if not point 1)1. create a vanilla Windows 8.1 installation media from this link:http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media2. Once you boot using the Windows installation disc, on the Windows 8.x installation window, click on Repair your computer.3. Click on Troubleshoot and in the Advanced options. First thing you may try is the Automatic Repair.4. If that does not help, then select Command Prompt. Enter the following four commands into the prompt.bootrec /fixmbrbootrec /fixbootbootrec /scanosbootrec /rebuildbcdOnce the command completes, restart the computer.

3 more replies
Answer Match 47.04%

How do I unpack, but not install, SoftPaqs?













Solved!

View Solution.

A:FAQ(23): Unpacking downloaded SoftPaqs

You can unpack a SoftPaq by running it with a few command line switches.  To do this, open a Windows command box and refer to the following information:Unpacking a SoftPaq fileSp#####.exe ?pdf ?f<path> -s WhereSP####.exe is the Softpaq to unpack.-pdf is a run time switch that overrides the build parameters.-f<Path> is a run time switch that overrides the default path set at build time.-s instructs the package to unpack in silent mode skipping the welcome, license and directory screens.EXAMPLE:At the command box prompt (with Administrator rights to prevent access issues) go to the directory where the SoftPaq is and type the following: sp59909.exe -pdf -fC:\SWSetup\sp59909 -s

3 more replies
Answer Match 47.04%

Whenever I download a large archive, whether it's 7z, RAR format or some bin format (that's unpacked via provided installer), I always have problems unpacking.

What happens is that, while extracting, I receive errors about some files that are corrupted and cannot be extracted. The FUNNY thing is, if I try to extract the same archive again it says some other file is corrupted while the one that was "corrupted on my first try now extracts properly. I don't know how is that even possible.

1) I know that the archives I download/get from friends are not corrupted, and I can trust those sources.
2) I've tried basically everything, like re-downloading, trying with numerous attempts, and updating the software I use (7z, Win RAR, or Daemon tools for those bin archives I mentioned).

Any help? Thanks,
VAO

A:I ALWAYS have problems unpacking files. Any help?

I'm wondering if your hard drive has some bad sectors. You might run a disk check program to see. Your drive manufacturer will probably have one.

7 more replies
Answer Match 47.04%

I have just replaced my old desktop for a new one that comes with windows 7 64 bit. But not sure why ever since I started using the new desktop to unpack rars and especially rars with parts, both winrar and 7zip often have error messages like:

"Packed data CRC failed"
"The volume is corrupted"
"The file is corrupted"
etc.

For example, one of my family member who lives in Ireland wants to send me a bunch of videos and photos taken from a trip they went. He packed these bunch of files into three part rars and uploaded onto a file hosting website and so I have to download each one of them. I first tried jdownloader and downloaded them but couldn't unzip it. Then I tried to download in the normal way using firefox but still couldn't unpack. And I started to think is the pack corrupted?

But then I tried to use my netbook (with win7 32 bit starter os) and downloaded the files through this computer, it unpacked smoothly without a hassle. I then tried to copy the files I have downloaded using my new desktop to my netbook and try to unpack them there but again it saids the file is corrupted. That means somehow it's not winrar or 7zip's problem but the way my new computer writes the files into the hard disk creates corrupted files?

So what's wrong with my new computer? Even my old desktop won't have these problems. Is it because of the 32 64 bit difference? Perhaps my Ireland cousin packed the files with winrar 32 bit and i used 64 bit didn't work? Or ... Read more

A:Weird when unpacking rars

Win Rar can be installed in bot 32bit/64 versions have you installed the correct version for your system

6 more replies
Answer Match 46.2%

My problem is that if u wanna unpack an exe file, could be a setup exe., then it will save the data in the temp folder (Windows drive), and my problem is that i made a patision (or however to spell that in english.. ) so i got 10 gb for windows, so if my windows ****s up i will be able to just reinstall without worrying too much for my files. (Programs like registery mechanic will often solve the registery prob.) Anyways, this means i don't have enough space on my c-drive, as i should have given it more ofc.. Should have given it 15 instead, as my programs are on that drive aswel... anyways! thats not the matter.. the matter is that when some exe. files wants to extract they want to extract huge amounts of software before installing, im talking about 1,3 gb + here, and i cant get that much space without deleting half of my programs or so.. SO what i want to know, is there a way to manualy unpack an exe. file ? Or is there a way to change its unpacking destination, so it won't save in temp.. thanks for all upcomming answer.

- Hans, Denmark.

A:Hard times unpacking exe files.

Change the place where it unpacks to the other partition you have for files, programs etc. This should be on the extraction wizard.

2 more replies
Answer Match 46.2%

HJT log removed as we analyze these only in the log forum and then only rarely. ~ OB

A:I think I got infected after unpacking a malicious file

Please describe the problems you are having with your computer so we can assist you better.

Please update MBAM and run a scan in Normal Mode and post the log in your reply as well.

Orange Blossom

1 more replies
Answer Match 45.36%

Hello and good morning, I having problems with bsod mostly while playing league of legends but can occur randomly at other times. I have done memtest86, scanned the hard drive, and even took it to pcdirect where there installed a new motherboard but the problem has persisted. Thank you very much for your time.

Just an update a new bsod happened while running the repair option on league of legends.

A:BSOD PLaying League of Legends error code 0x0000001e a common code

Hi,

Your Nividia drivers and Nforce networking drivers are causing issues, also some USB issues.


Code:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff80002e80b05, 0, ffffffffffffffff}
Probably caused by : ntkrnlmp.exe ( nt!ExpInterlockedPopEntrySListFault16+0 )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
KMODE_EXCEPTION_NOT_HANDLED (1e)
Driver Issues:


Code:

Driver: nvlddmkm.sys
Dated: Fri Jun 21 10:06:16 2013
Refers to: Nvidia video drivers.
As you have the latest driver installed, I would suggest Rolling back to the previous version.
If that does not fix the issue, then you may try this newer BETA version


C... Read more

9 more replies
Answer Match 45.36%

Hi guys, I have just recently upgrade my computer from Windows XP to Windows 7, but since then I haven't been able to install most games.

During installation, each game has a different error message but generally, the problem seems to lie in games that require unpacking large files, such as *.bin. For example, while trying to install Assassin's Creed 3, this message appeared:

An error occurred while unpacking: archive corrupted! Unarc.dll returned an error code: -7. ERROR: archive data corrupted(decompression failed)Click to expand...

or

Decompression failed with error code: -12. Bad CRC in the archive data0.binClick to expand...

Please help me, I'm going mad.

Computer's spec:

OS: Windows 7 Ultimate 64-bit (6.1, Build 7600)
Processor: Intel Core i5 CPU 750 @ 2.67GHz (4CPUs)
RAM: Elixir DDRam 3 2GB x2
GPU: ATI Radeon HD 4800 Series
DirectX 11
Motherboard: ASUS P7P55D
BIOS: 9/24/9 Ver: 08.00.15

What I've tried so far:

Updated drivers of graphic card, mainboard, etc.
Ran as Administrator.
Installed in safe mode.
Tried installing these games in another computer (everything's fine)
Reinstalled Windows 7.
Formatted entire HDD, reinstalled Windows XP (now even Windows XP has this problem)
Bought a new HDD

 

A:Cannot install softwares which require unpacking large files

what site are you downloading these from?
 

3 more replies
Answer Match 45.36%

This help request might fit in alternate discussion threads, but this seems like the most logical place to post... these could be 2 separate issues, but it feels like they are connected to me.

Problem:
A - Unpacking any RAR, Zip, 7z, etc file - particularly large ones results in CRC or other unpacking errors 90% of the time. Sometimes a simple retry works, sometimes re-downloading the compressed file works.. sometimes nothing works. Anything over 1GB is almost sure to fail miserably every time (often fails on different files within the package.
(this occurs using winzip, winrar, 7zip)

B - Multiple game client crashes - Oblivion, Various MMORPG (WoW, LOTRO, many others) crash constantly.. if the computer doesn't freeze or blue screen, the error is 100% the client .exe file .. it doesn't happen just on strenuous load sequences or 'laggy' areas.. it can just happen sitting in the middle of an unpopulated area.. varies once per 1-5 hrs.. rarely goes 3 gameplay attempts without at least 1 crash.

Both errors have occured pretty consistently over the last 3 years.. i give up on some games that have more crashes than others.. and give up on some because i can never even unpack the game to play it.

Original System: Dell XPS 600 Purchased October 2005 .. problems started right away - but I just ignored most of them until after warranty

Hardware Replaced:
Video Card (6 mos ago).. was nvidia 7800 gtx, now nvidia 8600 i believe..
Hard Drive(3 mos ago) - was Maxtor... Read more

A:Constant Unpacking Errors and Game Client Crashes

sorry - i hate bumping - put posted this late last night - figure there are more people on the forums now that hopefully have some advice!

Thanks

4 more replies
Answer Match 45.36%

i keep getting these two error codes every time i try to update these programs through windows update: Update for Windows 7 (KB974332) Update for Windows 7 (KB974431) Update for Windows 7 (KB976098) Ive tried to download these updates from the download centre with out any success. please help me to fix this problem im using is windows 7 ultimate 32 bit

A:error Code 800F081F and Code 8024200D with window 7 update

Hello,Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend you temporarily disable or uninstall them and then try accessing Windows Update later. If the problem still happens, try the following steps:Rename the Windows Update Softwaredistribution folder================================================1. Close all the open windows. 2. Click "Start", click "All programs", and click "Accessories". 3. Right-click "Command Prompt", and click "Run as administrator".4. In the "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me know before performing any further steps and include any error messages you may have received when it failed.
5. Click "Start", in the "Start Search" box, type in "%windir%" (without the quotes) and press Enter.6. In the opened folder, look for the folder named "SoftwareDistribution".7. Right-click on the folder, select "Rename" and type "SDold" (without the quotes) to rename this ... Read more

2 more replies
Answer Match 45.36%

I am completely stumped by this problem. I will do my best to explain it and see what you fine folks can do.

I had an older bluetooth dongle, off-brand model, 2010-2011 year, that I installed on my new desktop computer. It worked, but sound quality on my Sony Dr-BT101 headset wasn't great. It worked well with my bluetooth-enabled phones and tablets, so I suspected the dongle. I bought a CSR8510 dongle, which came with a CSR Cambridge Radio Harmony software stack. I installed the software, and turned on the headset, paired it, but no sound came out of the headset. I went to Sound, saw no entries. Went to device managers and saw the parts in yellow. I tried to update the driver but all I got was Code 18 error and this weird message in the picture. I clicked on properties and saw this message.





Quote:
The drivers for this device are not installed. (Code 28)

There is no driver selected for the device information set or element.




I am stumped. I've tried uninstalling, re-installing, installing other Bluetooth drivers, waving a magic wand, none of it has worked. I'm thinking it's a problem with the Registry, but I am not sure how to proceed.

Any ideas?

A:Bizarre Bluetooth driver problem (Code 18 and Code 28 error)

Give this a try. It's free.
https://www.slimwareutilities.com/slimdrivers.php
You do need to resolve those Other devices category issues.

1 more replies
Answer Match 45.36%

I have a HP 522c AMD Athlon 2000+, running windows xp. There is an integrated video card that went bad. So in installed an AGP video card it is a 3D Prophet 4000XT 32 MB. Now that the card is installed when I have it activated there is a code 12 on one of the pci to pci bridges so that my network card in the other pci slots will not work. I have tried the network card on other computers and it works fine, i have also tried the video card and it works fine. I also tried other items in the pci slots while the agp card is in(modem, sound card) and i still recieve the same error. The card works when a pci bridge is enabled but only with the VGAsave driver and with very low quality. When i check the device manager while both pci to pci bridges are enabled, when i can only run the VGAsave driver, it says the there is a conflict under the I/O range with the VGAsave and an Pci to Pci bridge. Any windows updates just delets the pci to pci bridge listed in the device manager. And i have tried all the drivers i could from AMD, HP, Hercules. Any help would be welcomed on how to fix this.
 

A:Code 12 in xp on a Pci to Pci bridge, Recieve a code 12 error with video card

your hp box is not only engineered by hp (who tend to focus on low assembly costs) but is an oem build, thus severely limiting your options. a suggested next step would be to attempt to poke around in the bios setup utility and/or to try out a wider variety of cards/slot configurations. good luck.
 

9 more replies
Answer Match 45.36%

Attachment 290231
i having problem with this windows update

here is zip for CBSAttachment 290230


thanks!!!

A:windows update error (code 9c48 and code 9c57)

You haven't run the CheckSUR tool.

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data

6 more replies
Answer Match 45.36%

I am having the typical black screen. I just want to see if anyone has a resolution to the problem before I have to spend money for a new one. I checked everywhere before I posted for help.

Thanks in advanced. Joe D.

More replies
Answer Match 45.36%

Greetings, I need help solving the error codes below. Thank you

Product: Windows Defender -- Error 1923. Service 'Windows Defender' (WinDefend) could not be installed. Verify that you have sufficient privileges to install system services.

Product: Microsoft Office Enterprise 2007 - Update 'Security Update for Microsoft Office Word 2007 (KB2251419)' could not be installed. Error code 1603. Additional information is available in the log file C:\DOCUME~1\user\LOCALS~1\Temp\MSIfb8e4.LOG.

I hope I have provide useful information to get your help.

Sincerely

A:Error code 1923 and Error code 1603

hi, got a questions for ya. have you uninstalled any virus protection software lately? the reason i ask it might of left remnants behind if you did not use the removal tool.

1 more replies
Answer Match 45.36%

Hi guys, first time posting so apologies in advance if I do something illegal. As far as I can gather, I should be posting in the right forum. I've been having system stability problems for the last week or so. I think it might be because of a mass driver update across my system since nothing else seems to be the cause.

Basically, I updated some drivers bout a week ago and now the PC either hangs or auto-restart when I'm playing games. At first I thought it might be due to OC instability, so I reset my bios to default settings. Didn't quite work out completely as the system still exhibits the "sudden death" during gaming.

Have tried the steps in the sticky above on refreshing the page file. defragging etc. Problem still hasn't gone away. All rams have cleared 7 cycles of memtest at 2.65 volts and 2.6 volts without problems, though everything has been reset to stock already.

My system specs are as follows :
AMD 64X2 4200+
MSI K8N Neo 4 Platinum
2 x 512mb Kingston CH5 PC3200 DDR
2 x 512mb Mushkin Black Line BH5 DDR
Inno 6600GT 128mb
Creative Audugy ZS Platinum
BenQ 1640
Gigabyte CD-RW
Hitachi/IBM 80GB SATA II
Western Digital 240GB SATA HD
Verudium Vortex 430W

Am fairly sure its not a power issue and the core temp never exceeds 49 degrees even at full load. Its about 44/45 idle. Am guessing it might be the soundcard though... Anyone able to help?

Would be most grateful for any assistance and thanks in advance.
... Read more

A:system error code Error code 100000d1

Looks like NV4mini.sys is the Nvidia faulting driver... Your Inno 6800GT drivers are at fault
 

4 more replies
Answer Match 44.94%

Just got this result. What does this mean??Thanks!

More replies
Answer Match 44.1%

I am unable to install Windows updates as I get an error " Code 64C : windows update encountered an unknown error..
Same with Code 66A
Please help.
I am unable to also install Windows Live essentials
I am using Windows 7
Greg

More replies
Answer Match 44.1%

Error Code C00D1199 (aka: code 80040265) is an error message that can be displayed in several different ways and can be worded different as well, but it all refers to this error message originally posted as message 80040265.

There were a few posts on here about them, but many of the threads seemed to be closed. I just noticed that I have gone through all of the motions and really tried, but no pickle here....well, there might be a pickle, but it is the kind of pickle you get stuck in and is not cool whatsoever.

Here is what I have done:

1. Made sure that the format was supported with windows media player. It was, as it is an .avi, so no problems there.

Here are the types that are compatible:
.au and .snd
.aif, .aifc, and .aiff
.cda
.vob
.jpg
.swf
.dvr-ms
.mp3 and .m3u
.mpeg, .mpg, .m1v, .mp2, .mpa, .mpe, .mp2v, and .mpv2
.mid, .midi, and .rmi
.avi and .wav
.asf, .asx, .wax, .wm, .wma, .wmd, .wmp, .wmv, .wmx, .wpl, and .wvx
.wmz
2. I made sure that other .avi's I have in my collection were working properly with the WMP (Windows Media Player). They were, just not the ones I was trying to fix, of course..

3. I made a sandwich and drank some Yoohoo.

4. Installed a sturdy set of codecs with DivX to ensure that that was not it. I know I had to do it before, but I recently cleaned and started my PC from scratch again, so the previous codecs were not there.

5.Made sure all of my audio devices and drivers were updated and installed properly-for the most part-which I ... Read more

A:Error Code C00D1199 (aka: code 80040265)

Welcome Miss Haley, have you read through some of the suggestions here? They seem to have some detailed info on the error code C00D1199 (aka: code 80040265)
http://www.updatexp.com/c00d1199.html

I use the free "Jet Player" and love it - whether it's movies or music - there's not much it won't play or burn, (runs circles around WMP)
http://www.jetaudio.com/download/
Hope this helps
 

1 more replies
Answer Match 44.1%

Admin password or power on password1st is how do I disable it all together?2nd thing I need system disable code # 54575104

A:System disable code error code

@Shuwat66? Please enter            41453120 Regards.

2 more replies
Answer Match 42.84%

Symptom:
The URL of a shared folder on the LAN,  copied into Windows Explorer address bar produces the Network Error in the above title.
Network Error: WIndows cannot access
\\server.LAN.com\MySharedFolder   Error Code: 0x8004005 - Unspecified error.
But from a Dos terminal, Windows Explorer can open the same location just fine.  From DOS terminal:
start

More replies
Answer Match 42.84%

Might be a long shot but thought I would try...

I'm working on uprgrading my amateur radio license and need to learn 5 words per minute morse code.

I was wondering if anyone has every used one and your luck with it.

Thank You
 

A:Morse Code Program

Did you look here :
http://www.google.co.uk/search?hl=en&q=MORSE+CODE+TRAINING&meta=
 

1 more replies
Answer Match 42.84%

I want to try and impress my friends in school with my coding abilities. I already made a game but I am wondering what would be some sort of useful program a beginner could code. Preferably batch or virtual basic. Thanks! 

More replies
Answer Match 42.42%

So I'm working on my first java project and I was wondering what everyone uses to write their java code. I'm looking for a good editor for the files.
 

A:Program for writing Java code

Check out Eclipse. It is quickly becoming the defualt for Java work.
 

1 more replies
Answer Match 42%

i need help fixing these 2 error codes 28 and 80070103

More replies
Answer Match 41.58%

When I attempt to open anything with Adobe,it loads the page but then a box comes up with the following message:
Microsoft Visual C++ Debug Library Runtime Error! Program: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe The application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. "
Uninstalling and reinstalling Adobe was no help.Be aware,I'm pretty 'puter illiterate.
 

A:Solved: Microsoft Visual C++ Debug Library Runtime Error! Program: C:\Program Files\A

Until more experienced help comes along, leave Adobe uninstalled and try the Free Foxit Reader, it reads PDF files and loads a bit quicker and is lighter on resources and takes a hell of lot less disk space.
Ray
 

2 more replies
Answer Match 41.58%

dont know where to put this but...

i am trying to make a web chat. and with ATL. I want to make a web service that get the job for Real time protocol. i could not get how to start.

if you know about it please write some of your views

A:How to make the program like MSN messenger, sharing for source code of msn

I think the programing forum may be of more help with this. I'll send you there.

2 more replies
Answer Match 41.58%

I am trying to understand the behavior of a small utility that I wrote using the Visual C++ compiler (circa 2000 version). The program is intended to be executed from a command line or from a batch file. It takes one argument, that can be passed on the command line, or if absent, the program prompts for the file name. Normally the file argument is specified as a full file path, which can get rather long.

The problem is that the program executes correctly or fails, depending on the length of the file path\name that it receives. The relevant code is below:
Code:

// Get input event file name and open the file.

if (argc == 2) // if there is exactly one command line argument
{
cout << "Editing " << argv[1] << "\n";
strcpy(infile_name, argv[1]); // take it as the filename to be edited
}
else // prompt the user for the file name
{
cout << "\n\nEnter the name of the file to be edited - "; // get file from operator entry
cin.getline(infile_name, 255); // will be renamed with .BAK extension
}


strcpy(outfile_name, infile_name); // new file inherits the original file name

if ((infile = fopen(infile_name, "rb")) == NULL)
{
wait("\n\nERROR - Unable to open the specified file\nEnter any key to exit...");
return(1); // exit - can't open input file
}


// read file fixed and variable hdr data from input file

fread(&fix_hdr, sizeof(f... Read more

A:Solved: Program sometimes fails to follow the source code (?)

If anyone out there cares, I managed to resolve this problem by changing one line in the program, that assigns argv[1] to infile_name.

strcpy(infile_name, argv[1]);

was changed to

infile_name = argv[1];

With that change, the program doesn't occur. But I have NO IDEA why.
 

1 more replies
Answer Match 41.58%

I was just wondering if direct Assembly language code can be written to get low-level access to certain hardware aspects of an operating system, and be run with normal higher level code, like C# or Java.

But my main question is how exactly? Assembly code must be assembled using an assembler program, right? So how can it be assembled independently and run from a higher-level language at the same time to aid in code from, say, Java?

Is it possible for Java to run and have Assembly written code execute to aid in my software as part of the absolute program?

I'm a bit confused here, so any pointers would help.
 

A:Solved: Can parts of a program's code be written in Assembly?

6 more replies
Answer Match 41.16%

Can you plz help this is not my laptop Im scared i will post a FRST log by going into the cmd in boot options.

More replies
Answer Match 41.16%

Windows 7 Ult 64x Unbootable, Problem code 6.1.7600.16385 after installing EaseUS ToDo backup

 

system recovery startup repair not able to fix the startup, returning the above problem code. 
When I boot with the windows install disc it seems that i end up back at the system recovery startup repair and the same result.
I am notified that there are no restore points.
At one point, I lost the use of my keyboard and at another, the drives were mis-numbered.  I removed the button battery for 30 minutes and am now back with only the original unbootable system.
 
1.  Ideally, I would like to fix and restore booting on this drive.
2.  Secondarily, would I be able to virtualize this drive to a virtual machine on another PC if it could boot as a virtual drive???
3.  least attractive would be to do a fresh install of the OS to another disk and at least have access to the data.
 
I have many registered programs and configurations that would be lost in the last scenario.
 
Any help would be greatly appreciated.  Please let me know what info you need.
 
Regards,
 
RuchUrm
 
 
 
 

A:Windows 7 Ult 64x Unbootable,code 6.1.7600.16385 after installing program

Last night, I ran chkdsk c: /f.
Although I didn't see any thing that stood out in the screen output, at the end I received this message:
 
USN journal verification completed
The second NTFS boot sector is unwritable
Failed to transfer logged messages to the event log with status 50
 
Could this have something to do with the inability to start up?  Do I need to run something to fix the second sector?
 
Thanks.

36 more replies
Answer Match 41.16%

How do i run SRVMGR.EXE on a Windows 7 box to manage Windows XP and Windows 2003 server.
This tool runs on Windows XP but not on Windows 7.

A:Application popup: SRVMGR.EXE - System Error : The program can't start because NETUI0.dll is missing from your computer. Try reinstalling the program to fix this problem.

Hi,
To run Server Manager on Windows 7 you need to download and install the Remote Server Management toolkit from MS.

Info link:
http://technet.microsoft.com/en-us/library/dd759202.aspx

Download link:
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=7887

Hope this helps.Spencer
TechNet Community Support

2 more replies
Answer Match 41.16%

Ahhh back to the experts. I have a rather unusual, 'never happened before', problem. When I click on one particular shortcut either on the desktop or elsewhere it flashes real quick on the screen but does not open. The program is Webroot Window Washer which is no longer available nor is support. Love it so I want to continue using it. Tried everything, uninstall, firewall, virus protection, but it still occurs. No error messages pop up. It only happens with this program. I'm sure it has happened to others! Thanks
* Running Windows 7 Premium 64-Bit

A:Program Problem - Program won't open - No Error Messages

If you google "Webroot Window Washer" there is a changed.

3 more replies
Answer Match 40.74%

I swear it wasn't my fault, but I'll be darned if I can find that registation code anywhere. It wouldn't be so bad, but I just bought the Halo 2 game and was really starting to enjoy it. Is there any way to get my game going again? Or am I gunna have to buy a new game just for the code? Any :blackeye: help would be appreciated. :blackeye:
 

A:Reformatted hard drive, lost the program registration code... am I screwed?

crashed said:



I swear it wasn't my fault, but I'll be darned if I can find that registation code anywhere. It wouldn't be so bad, but I just bought the Halo 2 game and was really starting to enjoy it. Is there any way to get my game going again? Or am I gunna have to buy a new game just for the code? Any :blackeye: help would be appreciated. :blackeye:Click to expand...

Find some one with the same game,ask for his code,should work
 

5 more replies
Answer Match 40.32%

first of all, hello to you all

as they thread title may allude; i am a little disgruntled at my first atempt to install my brand new genuine Windows 7 x64 Home Premium OEM

after the first 4 attempts at installing Win7 i managed to get around the installer asking for 'unknown device driver' by unplugging my card reader. I have been running XP x64 OEM for some time and have re-installed it at least 5 times and have never had any problems what so ever; if only the same were true for Win7!

having done some research it became clear that Win7 should take no more then 30-40 minutes to install; but here i am 23hrs later and it STILL hasn't even started installing yet; its still 'unpacking windows files' @ 99%...

has anyone else had this problem? if so, what did you do to fix it?

thanks in advance

A:23hrs - "unpacking windows files"

Welcome to Seven Forums.

Nice job on the system specs.

Sorry your having problems.
How long has it been at 99%?

We've made a list of questions which are the result of reoccurring incidents seen so far.
If you can have a look at these and give us your answers we'll be able to give you better suggestions.

Questions to use for help with Installation Issues

We have also seen people with AMD mother boards having these problems, try taking out all memory cards except one, if that doesn't work then move the memory card to a different slot and try again.

Do you have HyperTransport function settings in your BIOS?
There are two options in the BIOS Setup called K8 -- KN HT Speed and K8 -- KN HT Width, both are normally set as Auto. Change them to K8 -- KN HT Speed to 1x and K8 <-> KN HT Width to 8 8. You can change them back after the install.

If this doesn't work, then reply with more details and we'll try again.
EDIT:
Just read a thread where a guy with an AMD board was having similar problems said he turned off 'Cool 'n Quiet' setting (the feature that turns down the fan RPM). He also found a bad RAM stick by running memtest86+. After that Win7 installed with no problem. Might be worth a try.

4 more replies
Answer Match 39.9%

Help, can't print anything and can't find out how to fix that error code

A:Printer Spooler has a error message <Failed to Read Description. Error Code: 193 >

Hi, go to start search and type:- cmd, right click on the returned cmd.exe and select "run as administrator" at the prompt (copy paste)


Code:
sc queryex spooler > 0 & notepad 0
(press enter) I am guessing we will see error 1058.

Next still at cmd type:-


Code:
net start > 1 & notepad 1
(press enter)

Please post both notepad entry's here.

4 more replies
Answer Match 39.9%

During Windows backup, which wants to backup the 'C' drive and my games drive 'E' (for some reason), I get the following error message after the 'C' backup has completed but not the 'E':

'The backup operation that started at '‎2015‎-‎12‎-‎20T06:00:25.459859400Z' has failed with following error code '0x8078012D' (The operation failed due to a device error encountered with either the source or the destination. If the source or destination volume is on a disk, run CHKDSK /R on the source or destination volume, and then retry the operation.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.'

I ran CHKDSK \R and received several errors of the type: 'A disk read error occurred 0000185. The disk does not have enough space to replace bad clusters detected in file xxxxxx of name xxxxxx.'

My 'E' drive is 2TB with 205GB free. I really don't believe that the cluster(s) in error are bigger than 205G, but what do I know?

Anyone have experience with this problem?

Thanks.

More replies
Answer Match 39.9%

My System :
Windows XP Professional
Intel core 2 duo CPU T8100 @ 2.10GHz
1,99 gig of ram
Mobile Intel GMA X3100

My system sometimes restarts both in and out of games and so far have left these 2 events both 1003 and mini dumps as follows:

Event ID: 1003, Category: 102, Source: system error.

Error code 000000f4, parameter1 00000003, parameter2 87f91020, parameter3 87f91194, parameter4 805d297e.

Please help me, don't know what to do!
 

A:Random restarts -event id 1003 -system error- error code 000000f4

Your error is 0x000000F4: CRITICAL_OBJECT_TERMINATION
One of the many processes or threads crucial to system operation has unexpectedly exited or been terminated. As a result, the system can no longer function. Specific causes are many, and often best resolved by a careful history of the problem and the circumstances of the error message. One user, who experienced this on return from Standby mode on Win XP SP2, found the cause was that Windows was installed on a slave drive


The driver citted is crsss.exe and is an important part of your Windows OS.


See this link and read #2 to get some idea f what this driver does: http://www.liutilities.com/products/wintaskspro/processlibrary/csrss/


* It might pay you to do a security scan with your antivirus, etc.
 

1 more replies
Answer Match 39.9%

no matter how many times i clean the drive it will still come up with this error. i can't figure out what is going on. i am able to convert the movie just fine but when it comes times to write to blank dvd, it won't do it. this is the problem i am having on my laptop which i will include the log. for some reason on my pc the program convertxtodvd doesn't even acknowledge that i have a dvd drive , i believe it is the pcouffin, which i have uninstalled and reinstalled but i cannot get it to work. it says it is working fine but device no longer available. well here is the log from my laptop which will convert but will not finish the copy.

2/20/2008 1:29:47 AM info ********** Report session closed ***********
2/20/2008 1:29:30 AM error BURN: Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burner is dirty)]
2/20/2008 1:28:14 AM info BURN: Write started 894784 sectors to write
2/20/2008 1:28:14 AM info BURN: Writing speed requested x4.0, effective x4.0
2/20/2008 1:28:13 AM info BURN: Available write speed: 8x, 6x, 4x, 2.4x
2/20/2008 1:28:13 AM info BURN: Media ID: SONY-D21-00
2/20/2008 1:28:13 AM info BURN: Media type: DVD+R
2/20/2008 1:28:13 AM info BURN: Multiword DMA Mode 2
2/20/2008 1:28:11 AM info BURN: Scanned files #8, folder #2 - total size 1831393280 b. (1.71 Gb.)
2/20/2008 1:28:11 AM info BURN: Inserted media type : DVD+R
2/20/2008 1:28:11 AM info BURN: Write started
2/20/2008 1:28:10 AM info --------... Read more

A:Write error at 0 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burne

Replace the laptops burner... Laptop/notebook CD/DVD R/W's are very delicate and are more subject to failure than desktop writers
 

3 more replies
Answer Match 39.9%

I have about 15 laptops running Windows 7 Pro SP1 (brand new, just out of the box).  I've been able to install quite a few updates on about 3 of them (just started working on them).  However, now, I'm getting error code 80200011 when I attempt
to install additional "required" updates. 
I've tried clearing the BITS queue, deleting softwaredistribution folder and ran SFC and nothing came up as being an issue.  I've searched the net on this issue, but there doesn't appear to be much on this specific problem.  These systems
are behind a proxy server.  I have other (XP, Windows 2003) systems that are able to update, but is there an issue between WIn 7 and some proxy servers?  If so, why would I be able to install some updates?
Any help or suggestions would be GREATLY appreciated. Thanks all.

A:Windows 7 Pro - Windows Updates Error Code: Code 80200011

Hi,
Chek that your proxy is configured correctly, and if you can follow these steps to resolve this issue : stop the Windows Update service and make sure that the "Backround Intelligent Transfer Service" and "Cryptographic service" are started and then go to
C:\Windows and rename the software distribution folder to UpdateOLD , and finally restart the Windows Update Service


Oussama Oueslati | System Engineer | vNext Consulting

6 more replies
Answer Match 39.9%

We are running Windows XP and get an error code upon booting up that says, "Setup error encountered during installation - Error code 000D". I normally go to the web to find assistance, but can't seem to find an answer this time. Most ask if I have a file called "Creator" or Roxio products installed on the computer. I have searched for these files, but haven't found any. I do have a SONIC program. And I do have Creative MediaSource, but I don't think these are the same. Any ideas? Any help would be greatly appreciated. Thanks.
 

A:Solved: Win XP Error - Error Code - 000D: Encountered Prob Dur Install

8 more replies
Answer Match 39.9%

anyone run this one before?
I am not currently using a WIFI device.

Error 16393
Log Name: System
Source: Microsoft-Windows-Bits-Client
Date: 12/8/2015 3:05:05 PM
Event ID: 16393
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer: AllenTown
Description:
BITS has encountered an error communicating with an Internet Gateway Device. Please check that the device is functioning properly. BITS will not attempt to use this device until the next system reboot. Error code: 0x80004005.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Bits-Client" Guid="{EF1CC15B-46C1-414E-BB95-E76B077BD51E}" />
<EventID>16393</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-12-08T21:05:05.441501000Z" />
<EventRecordID>650</EventRecordID>
<Correlation />
<Execution ProcessID="844" ThreadID="1104" />
<Channel>System</Channel>
<Computer>AllenTown</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="ErrorCode">2147500037</Data&g... Read more

A:How resolve error 16393, BITS Error code: 0x80004005 I'net Gateway?

It happens to all my machines, and their internet connections are fine. Seems to be a common problem, but it likely isn't really causing any issues other than to those of us that look in our event viewers all the time.

0 more replies
Answer Match 39.9%

i have been having some troubles with my printer lately [Canon Pixma iP1800]
and i have been trying to enable "Printer Spooler" i went into services.msc and tried to fix the problem but came back with negative results Failed To Read Discription Error Code: 2) i later referred to Eric01's thread for further help for regedit (HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\CONTROL\PRINT\
i have found all original files mentioned in that thread with no extra files.
I have also tried to find any files within C:\Windows\System32\spool\PRINTERS and to delete anything in there.

So far i have had no luck and a report due soon.Please Help!!!!

System Specs : Windows 7 Ultimate 32x/4GB Ram/

BTW READ: in services.msc it does not read Printer Spooler but just Spooler
 

A:Printer Spooler Error (Failed To Read Discription Error Code: 2)

8 more replies
Answer Match 39.9%

When attempting to install MS Office 2010 (also applies to Pro, Beta, and 2007) via download, you may be foiled by Error code 25004 and System error 1073418460 under Win 7 (or Vista, XP). You may also see a refusal to verify the license. This typically happens when you fail to uninstall Office 2010 Starter, Office Click, or some other version of Office before attempting to install the new Office. You would think MS had already figured out how to prevent this <sigh>.

You need to remove all the instances of Office in order to properly install the new office. However, you may also find that the Windows uninstall from Control Panel, Add or change a program will fail to remove the old Office.

This thread can be helpful, although it is somewhat dated. The RevoUninstaller sounds like a successful utility, but I have not tried it myself.
http://forums.techguy.org/business-applications/1034399-cant-uninstall-office-2010-a.html

I found this MS KnowledgeBase article appropriately addresses the removal problem
http://support.microsoft.com/kb/290301
Work your way through the methods, starting with Method 1. I was disappointed to see that the MSICUU2.exe was discontinued and found its replacement, Microsoft FixIt, was ineffective. I had to go with Method 4, which is a manual tearout.

Save a copy of the Registry before monkeying with it as it is easy to accidentally delete a wrong key. A manual tearout is tedious, but you do not have to eliminate all the indicated quids {bunchof... Read more

More replies
Answer Match 39.9%

Help I need assistance solving this problem.

When installing Windows 2000 setup copies the initial files to the hard drive and then restarts to begin the 1st stage of setup.

The system begins the startup process by "Loading the Windows Executive" At this point setup stalls and gives the following message:
"Setup cannot load ntkrnlmp.exe the error code is 16"
This error is duplicated in different releases in win2k from the beta 3 to the final releases.

Please assist, respond to [email protected] or ICQ 1937432
 

More replies
Answer Match 39.9%

Ive tried a whole bunch of different things to solve this error -
an error occured during DirectPlay Voice Setup. the error code is 0x8015017

Ive tried the DPVsetup.exe fix

RESOLUTION
This problem generally occurs only the first time that you run the test. If this problem continues to occur after the first attempt, follow these steps:
1. In Control Panel, double-click Sounds and Audio Devices.
2. On the Voice tab, under Voice Playback, click Advanced.
3. On the Performance tab, move the Hardware Acceleration slider at least one position to the right.

Ive installed 2 different files..

And still the tick remains on Mute against the microphone?? I can hear sound through the mike but cannot activate it?? Can anyone help?
 

More replies
Answer Match 39.9%

Mod Edit: Moved from Win8 to the Am I Infected forum ~~boopmeI randomly decided to look at McAfee and check my settings, etc.  When looking at the main screen, everything states its on and green.  I had the most current definitions loaded.  When I checked my McAfee firewall it stated on.  When I clicked to go into the McAfee firewall, the screen then changed and said it was off.  When clicking the Turn On button, it would immediately shut off.  I searched this issue and the blogs stated to look at the Windows Firewall under Services.  When I checked, it was not there.  I did a Windows Search for it and found it.  When it opens it gives tells me I need to Update the Firewall Settings.  When I click on Use Recommended Settings it gives me an error "Windows Firewall can't change some of your settings.  Error Code 0x8007042c." I've checked out some of the blog discussions and followed a few thread about creating new register.bat files and running them.  I've also tried merging some .dll files also per the bloggers.  After doing these actions, the Windows Firewall now appears in my Services but when I click to start it I get the error "Windows could not start the Windows Firewall Service on Local Computer.  Error 1068:  The dependency service or group failed to start"

A:Can not start Windows Firewall - Error Code 0x8007042c and Error 1068

McAfee has verified I have a virus.  Will post in the Virus Forum.

15 more replies
Answer Match 39.9%

I was given an HP Compaq Presario C500 that was headed for the garbage because it would not connect to the internet. After running several scans ESET online scanner came up clean. Installed Microsoft Security Essentials and installed SP1, and can't get it to install SP2. I keep getting error code 80070017 / Windows Update encountered an unknown error.

I would prefer to reformat but Recovery Manager restarts back into Windows and I have no disks.

Can provide a long list of what has been done if needed including WU Modules (Normal Mode) and WU Components fixes. Permissions point in every which way but the correct way!

Any help would be much appreciated!

Free space is presently @ 42.3 GB of 68.9 GB on C: Drive (started out with 7.3 GB's free space! )
and 4.91 GB free of 5.53 GB on Presario_RP (D)

Specs as follows:
Vista Home Basic
Intel (R) Celeron (R) MCPU
520@ 1.60GHz 1.60 GHz
512 MB RAM
32-bit OS
Denied access to the CBS folder itself though can access CheckSUR.log which I am including along with sfcdetails.

=================================
Checking System Update Readiness.
Binary Version 6.0.6001.22375
Package Version 5.0
2010-10-04 19:57

Checking Deployment Packages

Checking Package Manifests and catalogs.

Checking package watchlist.

Checking component watchlist.

Checking packages.

Checking component store
Summary:
Seconds executed: 2478
No errors detected
=================================
Checking System Update Readiness.
Binary Version 6.0.6002.224... Read more

A:Error code 80070017 / Windows Update encountered an unknown error

Checking Component Store
(f) CSI ReadFile Failed 0x00000017 winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990\wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990
(f) CSI Payload File Corrupt 0x00000000 wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990



You have corrupted C:\Windows\WinSxS\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f699
folder thus this issue with updates ,I'm not fully sure it's only issue with wcp.dll or with full folder.For precaution I recommend replace all files in this folder.

How to fix:

1.First prepare special recovery disk Create a Recovery Disc
and make sure boot order in your BIOS is CD-ROM,C,A
(if you don't know how to to do that then check your computer manual)

2.Download attached to post FixPacks.zip file -in zip file is packed Packs folder -you have to unpack it and place directly on C: exactly as I show below:

Click this bar to view the full image.
3.Boot burned special recovery disk (if you don't have Vista DVD instead use special recovery disk )
Choose language>>Repair Computer>>WinRE>>command prompt

and type:

robocopy C:\Packs C:\ /E /IS

press ENTER

del C:\Windows\Logs\CBS\*.*

press ENTER

4.Back to your system and run Readiness Tool again.
5.Try install SP2 from Microsoft Dow... Read more

49 more replies
Answer Match 39.9%

I'm running a Windows XP Pro system, 2gb good RAM, AMD Athlon 64 3500+, nVidia GeForce 9800 GT. I attempted to install a copy of Oblivion (which I have had and used many times in the past). The disk is in very good condition, and can be used on another machine. I have tried it on multiple drives for this one PC, but now, it will not complete the loading of the InstallShield Wizard. It gives me this error:

Error Code: -5006 : 0x80070001
Error Information:
>SetupDLL\SetupDLL.cpp (1194)
PAPP:Oblivion
PVENDOR:Bethesda Softworks (http://www.bethsoft.com)
PGUID:35CB6715-41F8-4F99-8881-6FC75BF054B0
$11.0.0.28844

I have searched for a solution online, but have not found one that works yet. Any suggestions?
 

More replies
Answer Match 39.9%

Here's my story:

My sister's PC had been corrupted in lots of unnecessary programs and apps.
I deleted those craps. Windows Action Center then prompts me to update my windows, and I did.
PC restarted and POOF!!!, I am seem to be forever stuck in the Startup Repair Loop.
So I tried System Restore, but it's giving me the error code stated above (error 0x80070003).
I also tried System Image Recovery, and it's not also of help. Also, checking Hardware Options didn't help.
Lastly, I tried the Command Prompt option and it gives me nothing.

So how can I possible fix this error? ((

thanks in advance for those helpful respondents ))

A:Startup Repair Error (Forever Loop) Error Code 0x80070003

Hello Cath, and welcome to Seven Forums.

You might see if the tutorial below may be able to help with this.

Startup Repair Infinite Loop Recovery

Hope this helps,
Shawn

2 more replies
Answer Match 39.9%

Hello again, BSOD Forum,

I've been free of frequent BSODs since earlier this year. Recently I must have installed some software or something else must have gone wrong, because the blue screens are back.

Here is what happened earlier this year, in case anyone needs any further context:

Several BSODs following power outage. Varying BCCodes and frequency.

There isn't any specific behavior or action that triggers the crashes. I was listening to Spotify and browsing the internet with Chrome on the most recent crash. Also, I seem to be having trouble installing a security update from Microsoft (Security Update for Windows 7 for x64-based Systems (KB2892074)). I've tried using the "Update Readiness" tool supplied by Microsoft, but it doesn't seem to be working. It only asks if I want to install some hotfix instead of the security update that keeps failing. Not sure if these two things are related, just thought I'd throw it out there in case anyone has had experience with this issue.

Attachment 297074

Aside from that, virus scans have been clear. MSE does nightly scans (I believe), and its definitions are constantly up to date.

Attached are the SF zip files. The last crash I got was a Memory Management error. I will run Memtest86 tonight and post the results tomorrow morning. If anyone sees anything of interest in the dumps please don't hesitate to let me know.

Attachment 297071

Thanks in advance,
Jeremy

A:BSOD Memory Management Error, didn't catch error code.

Not happy to see you again with the issues, RaptorBuddha.

Display drivers are failing. Install and try the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Atheros network driver is failing, too. Update it from ATHEROS drivers for Microsoft Windows (Atheros?????), matching your devices model number.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.
If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.

Edit: The msinfo32.nfo file is corrupt..... upload it again for any future need.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it w... Read more

9 more replies
Answer Match 39.9%

Hi,
I have been having some recurring problems with the attempts to install some automatic windows updates.

Security Update for Microsoft Office Acess 2007
Security Update for Microsoft Office Outlook Junk Email Filter

I am not able to install these updates, maybe any other updates in general. After attempting the install the following install window says, "Windows Update encountered an unknown error." Next to it an error code 80070643. Microsoft provides a solution to the problem, by re-installing Microsoft NET. Framework. They also provide a link to the program NET. Framework cleanup tool that enables you to uninstall NET. Framework, and it's components.

I followed Microsoft's instructions to solve the issue, though I've been put at a standstill. I have used the NET. Framework Cleanup tool to uninstall NET. Framework and it's components (states that it uninstalls all versions, 1.1 SP1 1.1, 2.0, 3.0, 3.5.) Then afterwards instructed to reinstall NET. Framework, specifically in an order, 3.5 then, 1.1, then 1.1 SP1. I start with 3.5, then as the installation starts it says that to contiunue installation I must turn off or on windows features in the Control Panel. I do so and turn off all Windows features. Then continue and it again states to turn off features in the Control Panel.

I wasn't able to continue the process, and I am also concerned that this is the same error that made me unable to install Microsoft Security Essentials, (as t... Read more

A:Error Code 80070643, Windows 7 Update error, can't install updates.

Hello?
Waiting for a day no one seems to be replying.
 

1 more replies
Answer Match 39.9%

I have been having problems installing 8 updates since early May 2012. I am getting the error code in the title line.

The updates are:

[LIST][*]Security Update for Microsoft Office 2007 suites (KB2596672)[*]Security Update for Microsoft Office 2007 suites (KB2596792)[*]Security Update for Microsoft Office 2007 suites (KB2596880)[*]Security Update for Microsoft Office 2007 suites (KB2597162)[*]Security Update for Microsoft Office 2007 suites (KB2597969)[*]Security Update for Microsoft Office Excel 2007 (KB2597161)[*]Security Update for Microsoft Office Word 2007 (KB2596917)[*]Update for Microsoft Office Outlook 2007 Junk Email Filter (KB2687267)

I have run FixIt, but to no avail. I have also turned off services and rebooted and ran Windows Update and still got this error.

Do I need to just skip these updates, or somehow troubleshoot this and fix it. If I need to fix it, I need help.

Regards, and thanks.

More replies
Answer Match 39.9%

Hello I keep getting this 3 errors (Error Code 0x8007042c, Error 1068 and (-5001 : 0x80070002), after installing:

Update for Windows 7 for x64-based Systems (KB2607576)

and

Update for Windows 7 for x64-based Systems (KB2603229)
Although both updates installed successfully I keep getting this errors since today when I installed those updates here are some pics:

http://i1178.photobucket.com/albums/...ewallerror.jpg

I cannot start windows firewall

not even from here

http://i1178.photobucket.com/albums/...artuperror.jpg

and I can't install games either

http://i1178.photobucket.com/albums/...stallerror.jpg
Help me please Is my computer ruined? I will provide all the information you need but please help me fix it I couldn't find any solutions on Google so please help me, I'm begging you

I cannot do a system rollback since it says there were no restore points but I could do a rollback before, I've uninstalled those updates also but the problem persist

A:Error Code 0x8007042c, Error 1068 and (-5001 : 0x80070002) after insta

Anyone? I'm really scared by the fact that my firewall does not work That means my computer is vulnerable

9 more replies
Answer Match 39.9%

Hi,

When my Dell Inspiron 1501 locked up, I restarted it. It looked ok during the startup process untill it came to the Dell screen with the bars running across the bottom of the screen. There, it brought up the Blue Screen with the error "0x00000024 (0x00190203, 0x8aa211f8, 0xc0000102, 0x00000000)" When I restarted it, it brought up another blue screen with "0x00000024 (0x00190203, 0x8a950890, 0xc0000102, 0x00000000)"

I restarted it again and pressed the f12 key. I ran an express test on the computer, and it brought up these errors: "Error Code 0F00:1344 Msgisk_0-Block 5320033: Uncorrectable Data Error or Media is Write Protected" and "Error Code 0F00:065D MsgISK_0 - the self-test failed the read portion of the test"

What do these errors mean and what can I do to repair the computer? Is there a Hard Drive issue?

Thank you for your help
Jttech
 

More replies
Answer Match 39.9%

Windows 8, "File: \BCD Error Code: 0xc0000034"


Good Day Everyone,

Trying to resolve this error:



I have a Window 8 recovery USB and a Windows 8.1 recovery USB both from another laptop...

Mine are 32 bit machines, if the laptop i am working on is 64 bit will it boot on my USB recovery that is from a 32 bit machine? My buddy doesn't know if this troubled laptop is 32 or 64 bit

When I use the recovery usb and try a refresh or a comlete format it comes back telling me the drive is locked and stops in its tracks.

Also from a the dos command window (from the recover usb advanced option section) i have tried the following with NO success...

Bootrec /fixmbr - successful but didn't help
Bootrec Fixboot - successful but didn't help
Bootrec - RebuildBCD - Goes off searching, comes back with 1> C:windows, I type Y to add it but it comes back with an error "The requested system device can not be found"

I also tried BCDboot c:\windows\ /s c: /l en-us - said it was successful but still didnt fix the boot problem.

So i am not sure if I am running into a 32 bit vs 64 bit issue or if i need to find a way to unlock my drive so the refresh will work?? Or...?????

Any help or direction would be greatly appreciated!!

This is on an Acer Aspire V3-551

Regards,
Darren Vaillant

A:Windows 8 -Boot Error -> File: \BCD Error code: 0xc0000034

Anyone???

2 more replies
Answer Match 39.9%

When using Mozilla Firefox recently I encountered the problem of getting the following response from two separate secure https login servers:
1) Gibson Research Corporation, Internet Security testing (for Shields Up!) at:
https://grc.com/x/ne.dll?bh0bkyd2, and
2) my ISP WebMail server at:
https://webmail.atl.earthlink.net

Error Code 500.
Message: Internal Server Error.

I soon discovered that when installing the software supplied by my ISP, they caution the following when using a non-IE browser during the installation process, and instruct you to setup the connection settings for localhost:8080 with regard to their dial-up accelerator, otherwise the accelerator may not work properly.

This conflicts directly with the solution to the above Error Code 500 problem:

The solution is as follows with Mozilla Firefox:
Pull down: Tools->Options->General->Connection->Connection Settings
Choose: Direct connection to the Internet

-- Tom
 

More replies
Answer Match 39.9%

On startup I get a popup box with "Initialization Error - error code: 0x80073b01 for MS Security Client", with a selection of choice of "OK".  This issue isn't malware related because I had an earlier topic http://www.bleepingcomputer.com/forums/t/516854/initialization-error-error-code-0x80073b01-for-ms-security-client/?view=getnewpost that was used to finish the malware removal process.  Also when I shutdown my PC, I get a message to not force a logoff because 1 of 3... updates are being installed, even though my MS Security is up to date.

A:Initialization Error - error code: 0x80073b01 for MS Security Client".

See comments by Maurice Naggar at http://spywarehammer.com/simplemachinesforum/index.php?topic=14246.0 .
 
Louis

1 more replies
Answer Match 39.9%

My  HP Envy sleekbook 4-1200eo came with windows 8.0 and was uppdated to 8.1 and later with windows 10 preview. All has been working ok until a month ago. Have been trying to boot again and managed to get as far as the final of installing windows 10. After that it says bcd error 0x0000034, need to contact supplier etc...Now I can only start and se the content of f1 and f2 keys ( ie computer installations and repectively diagnosticss test) but not enter the f9,f10 and f11 which contains the menues for rebooting. I cannot install w10 with a download from microsoft page, the computer just wont recognize the memory stick. Nothing happens.Pls someone, help me out 

More replies
Answer Match 39.9%


Hello All,

We are facing issue in domain machines as group policy is not updating. after rejoin the domain it's working perfectly.

Below are the event IDs : 7320, 7007, 7326, 1017, 7016

local administrator is able to update group policy properly but non of domain user able to update grou policy properly.

below is the error.


Component Status
Component Name
Status
Last Process Time
Group Policy Infrastructure Success 8/20/2015 1:58:15 PM
Folder Redirection Pending 8/20/2015 1:58:05 PM
Folder Redirection did not complete policy processing because the user needs to log on again for the settings to be applied. Group Policy will attempt to apply the settings at the user's next logon.
Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 8/20/2015 1:58:04 PM and 8/20/2015 1:58:05 PM.



Thanks, dashrath Chate 9763107923

More replies
Answer Match 39.9%

When i try to install my windows update, i always get both error code  800F0900 and 800B0100. i tried installing the updates manually, used MS Fix it and the system update readiness tool. I use sfc /scannow and it says  "No integrity violations found". Still error. Can anyone help? I have uploaded my CBS zipfile to googledrive http://tinyurl.com/ogyfd3y.(Since datahost is not working.)  and attached the sfc text file overhere.
Hope you guys can help me solve it
 
This is my Farbar scan.
 
Farbar Service Scanner Version: 26-07-2015
Ran by Finance Server (administrator) on 19-09-2015 at 17:00:41
Running from "C:\Users\Finance Server\Downloads"
Microsoft Windows 7 Ultimate  Service Pack 1 (X64)
Boot Mode: Normal
****************************************************************
 
Internet Services:
============
 
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.
 
 
Windows Firewall:
=============
 
Firewall Disabled Policy: 
==================
 
 
System Restore:
============
 
System Restore Policy: 
========================
 
 
Action Center:
============
 
 
Windows Update:
============
 
Windows Autoupdate Disabled Policy: 
============================
 
 
Windows Defender:
==============
WinDefend Service is not running. Checking... Read more

A:Error code 800F0900 and 800B0100 windows update error

Please download and run the Windows Update Troubleshooter.
 
Clicking on the link above will start the download automatically.
 
Please post the results in your topic.  Do not use a host website to post this.  If the information needs to be downloaded I will not do this.  I will not download anything to my computer unless I know exactly what it contains.

5 more replies
Answer Match 39.9%

On booting PC, I get an error box with the above message.  Outlook comes up OK but not IE.  I also get that when I attempt to run Microsoft Security Essentials.  How do I correct this issue?
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 11.0.9600.16428  BrowserJavaVersion: 10.45.2
Run by Baltz at 12:06:42 on 2013-12-08
Microsoft Windows 7 Home Premium   6.1.7601.1.1252.1.1033.18.6057.3743 [GMT -6:00]
.
AV: Microsoft Security Essentials *Enabled/Updated* {641105E6-77ED-3F35-A304-765193BCB75F}
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Microsoft Security Essentials *Enabled/Updated* {DF70E402-51D7-30BB-99B4-4D23E83BFDE2}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
c:\Program Files\Microsoft Security Client\MsMpEng.exe
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k netsvcs
C:\Program Files (x86)\Common Files\logishrd\LVMVFM\UMVPFSrv.exe
C:\Windows\system32\svchost.exe -k NetworkService
C:\ProgramData\WPM\wprotectmanager.exe
C:\Windows\system32\taskhost.exe
C:\Windows\system32\Dwm.exe
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Program Files (x86)\Common Files\Ado... Read more

A:Initialization Error - error code: 0x80073b01 for MS Security Client

Hi there,my name is Marius and I will assist you with your malware related problems.Before we move on, please read the following points carefully. First, read my instructions completely. If there is anything that you do not understand kindly ask before proceeding. Perform everything in the correct order. Sometimes one step requires the previous one. If you have any problems while following my instructions, Stop there and tell me the exact nature of your problem. Do not run any other scans without instruction or add/remove software unless I tell you to do so. This would change the output of our tools and could be confusing for me. Post all logfiles as a reply rather than as an attachment unless I specifically ask you. If you can not post all logfiles in one reply, feel free to use more posts. If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed. Stay with me. I will give you some advice about prevention after the cleanup process. Absence of symptoms does not always mean the computer is clean. My first language is not english. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.   Scan with FRST in normal modePlease download Farbar's Recovery Scan Tool to your desktop: FRST 32bit or FRST 64bit (If not sure: Start --> Computer (right click) --> properties)Run FRST. Don´t change one of the checkboxes and hit Scan. Logfiles are created on your desk... Read more

20 more replies
Answer Match 39.9%

My  HP Envy sleekbook 4-1200eo came with windows 8.0 and was uppdated to 8.1 and later with windows 10 preview. All has been working ok until a month ago. Have been trying to boot again and managed to get as far as the final of installing windows 10. After that it says bcd error 0x0000034, need to contact supplier etc...Now I can only start and se the content of f1 and f2 keys ( ie computer installations and repectively diagnosticss test) but not enter the f9,f10 and f11 which contains the menues for rebooting. I cannot install w10 with a download from microsoft page, the computer just wont recognize the memory stick. Nothing happens.Pls someone, help me out 

More replies
Answer Match 39.9%

When i try to install my windows update, i always get both error code 800F0900 and 800B0100. i tried installing the updates manually, used MS Fix it and the system update readiness tool. I use sfc /scannow and it says "No integrity violations found". Still error. Can anyone help? I have uploaded my CBS zipfile to googledrive CBS.rar - Google Drive. (Since datahost is not working.) and attached the sfc text file overhere.

I have tried Windows Update Troubleshooter then tried windows update again and a new error Code 80246007 appear.
Hope you guys can help me solve it.

This is my Farbar scan.

Farbar Service Scanner Version: 26-07-2015
Ran by Finance Server (administrator) on 19-09-2015 at 17:00:41
Running from "C:\Users\Finance Server\Downloads"
Microsoft Windows 7 Ultimate Service Pack 1 (X64)
Boot Mode: Normal
****************************************************************

Internet Services:
============

Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo.com is accessible.


Windows Firewall:
=============

Firewall Disabled Policy:
==================


System Restore:
============

System Restore Policy:
========================


Action Center:
============


Windows Update:
============

Windows Autoupdate Disabled Policy:
============================


Windows Defender:
==============
WinDefe... Read more

More replies
Answer Match 39.9%

Hi,
My computer keeps shutting down. A system error box appears and sys theres been a fatal error and that the computer will shut down in 1 min. At first the computer didnt actually shut down but slowed so you couldn't do anything but now it shutsdown and I can barely open a single window before it goes off. The error code 1073741819 is included i nthe system error box.

Any help would be greatly appreiciated.
Thanks
Sarah
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 20:17:57, on 27/08/2009
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\HPQ\IAM\bin\asghost.exe
C:\Program Files\Analog Devices\Core\smax4pnp.exe
C:\Program Files\ATI Technologies\ATI.ACE\CLIStart.exe
C:\Program Files\HPQ\HP ProtectTools Security Manager\PTHOSTTR.EXE
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\hpq\HP Wireless Assistant\HP Wireless Assistant.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\IFXSPMGT.exe
C:\WINDOWS\system32\IFXTCS.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\ProtectTools\Embe... Read more

More replies
Answer Match 39.9%

I keep getting a display driver error and then the computer crashes with the BSOD. It happens quite often but I can't get the error message.

I checked my display drivers and according to the device manager, the drivers are up to date. I believe I have a AMD Radeon HD 7570

I don't know what information to give someone, but please help.

A:BSOD Unsure of Error Code but says Display Driver Error

Hi hmedina62.







  
Quote: Originally Posted by hmedina62


I keep getting a display driver error


Can you be a bit more specific? Do you get any popup balloon from system trey like this one?

Anyway, the issue is definitely display related. A stop 0x116 is display/graphics failure. And the display driver is not up to date. It is on June 2012.

Update it, but not to the latest. Uninstall your installed latest version of the display driver.
How-To Uninstall AMD Catalyst Drivers From A Windows Based System
Then clean up any possible leftover.
Drivers - Clean Left over Files after Uninstalling
Then install version 13.9 WHQL only.
Previous AMD Catalyst? Display Drivers
When the update is done, stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

As it is a branded desktop, one info is very important, The PSU. Let us know the wattage of the PSU.

Also, is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Let us know the results.
_____________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analys... Read more

4 more replies
Answer Match 39.48%

Hi... I was wondering if anyone else is having same problem as me when trying to install the 32-bit RC. I have created a 50 gigs logical partition on my hard drive to install windows 7 on (i'm using Vista Home Premium on my Dell laptop). on installation screen i select the drive for the new installation and so it goes to the next screen where it shows a list of bunch of stuff that it's supposed to do. The first one is "copying files" or something along those lines which gets checked and so it moves to the second thing that is i believe called unpacking the installation files (or something similar). My installation "freezes" there as it shows 0% for about an hour or two and then it errors and cancels the installation.
any help would be much appreciated.
Cheers

A:"unpacking" problem in RC installation

Hi,houman

Try re-burning the iso at 4X speed with imgburn

3 more replies
Answer Match 39.48%

I am using a WD Proxkey DSC and while signing I am getting the following error"
"The Windows Cryptographic Service provider reported an error: The parameter is incorrect. Error Code: 2148073511"

More replies
Answer Match 39.48%

My wife was installing new software and when she started up the computer again it has an error message. The computer is 5 years old and the tech support has expired. I am wondering if anyone can guide me through fixing the computer. I ran an analysis and it came up with uncontrollable data error or media block. The computer gets to the windows XP screen and then a blue box comes up saying among other things to disable BIOS and cache and restart using safe mode-advanced startup options (F8). I cannot seem to get beyond the "call dell prompt".
Thank you all......

A:Error code (uncorrectable data error) [BSOD]

I assume the blue box is full screen?
It is called a BSOD(Blue Screen of Death) or just Blue screen... you may find that renaming your thread to state that its a blue screen you will probably get an answer. Best thing to start with though, would be to log in in safe mode (by tapping F8 when booting up your pc and choosing to start up in safe mode) then to uninstall the program because it is obviously the cause, what piece of software is it? generally BSODs will be to do with hardware/drivers/things that windows cannot fix on the fly.
There are other users which can give you a definitive answer with this because i am not experienced enough to know how to analyse it...

2 more replies
Answer Match 39.48%

Has anybody received this error message? I've found other threads where people post the same problem, but I haven't seen any solutions. Essentially, every time I troubleshoot ANYTHING (wifi-connectivity, printer troubleshooting, etc.), I get this error message.

I got this error message when troubleshooting my printer. It states: An unexpected error has occurred. The troubleshooting wizard can't continue.

Package ID: Unknown
Path: Unknown
Error code: 0x80070005
Source: Temporary files
User: JJ-HP\JJ
Context: Restricted.

Any ideas?

A:An error occurred while troubleshooting. Error code 0x80070005.

Hi and welcome to SevenForums,
Create a new administrator account,
http://windows.microsoft.com/en-us/Windows7/Create-a-user-account
If the issue does not occur in new user account then refer the following link to fix the corrupted user account.
Fix a corrupted user profile - Windows Help

4 more replies
Answer Match 39.48%

I've always had weird things wrong with my system which I've suspected memory problems, like games that take up a lot of memory would sometimes crash, etc.

I had gotten BSODs before, but RARELY. Now recently, at least once a day I've been getting this BSOD "DRIVER LESS_THAN_OR_EQUAL_TO" (something like that).

Here is the exact error I get:

Error code 1000000a, parameter1 00000000, parameter2 00000002, parameter3 00000000, parameter4 8053624f.

Error code 1000000a, parameter1 c3e9659a, parameter2 00000002, parameter3 00000001, parameter4 806ffa16.

Error code 1000000a, parameter1 00000000, parameter2 0000001c, parameter3 00000001, parameter4 804e163c.

Those above are from 3 separate occasions, all within 2 days. The odd thing is, this BSOD started coming recently. I would get a BSOD maybe 1ce a week at most before, and now I am getting this every day.

Another thing I've noticed is my computer sometimes get sluggish after a restart from a BSOD.. its very odd.

I've run windows debugger on the mini dumps of those crashes and got :

Probably caused by : SCSIPORT.SYS ( SCSIPORT+5974 ) for one of them
and
Probably caused by : ntoskrnl.exe for the other two.

Thanks.
 

A:System Error BSOD Error code 1000000a, happens often

My computer specs are:

Intel prescott 3.0ghz w/ HT
WD 160GB 8mb buffer 7200rpm hard drive
2 x 512mb kingston ddr400 valueram
Radeon 9550 video card (AGP 8x)
Creative Live! 5.1 sound card (PCI)
Geniatech X8000A hdtv tuner card (PCI)
NEC 2510A dvd burner
Samsung 162c dvd drive
350watt antec tru power supply
 

1 more replies
Answer Match 39.48%

When i try to search for new updates on windows update i get this error code : 800F0900.
I have used MS Fix it and the system update readiness tool. Still error. Can anyone help?
 
I saw in a old post somebody used the CheckSUR.persist.log to fix it. I can upload mine if needed

A:Error Code 800F0900 Windows Update Error

Hi to BleepingComputer,
 
 
Let's see what we can find...
 
  Check Windows System files integrity
open the Command Prompt as Administrator (Tutorial)
type the following command and press Enter:
sfc /scannow
Note: This may take some time to finish.if it doesn't say "No integrity violations found" them do this:
In the command prompt window, type or Copy & Paste the following:
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >"%userprofile%\Desktop\sfcdetails.txt"

Close the command prompt.
Attach to your post the sfcdetails.txt file that was just placed on your Desktop
You can safely delete the sfcdetails.txt file afterwards if you like
 
Check some windows critical services...
Farbar Service Scanner (FSS)
Download Farbar Service Scanner and save the file to the Desktop.
Run FSS
Check all the options
click Scan
Post the generated log in your reply.

9 more replies
Answer Match 39.48%

Trying to load HP All-In-One printer drivers/software on Sony laptop w/wireless network connection.
I think I fixed the MSI.dot4wrp40 problem but now getting other errors, i.e. error code 2203.

Also got error "C:\Windows\installer\7d4c42.msi".

Would appreciate any help to resolve these problems.

Thank you.

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4063 Mb
Graphics Card: NVIDIA GeForce 9600M GT, 512 Mb
Hard Drives: C: Total - 371015 MB, Free - 263454 MB;
Motherboard: Sony Corporation, VAIO, N/A, N/A
Antivirus: Prevx 3.0, Updated: Yes, On-Demand Scanner: Enabled
 

A:Error writing to file-error code 2203

You could try this link to see if it helps:

http://h10025.www1.hp.com/ewfrf/wc/...lc=en&cc=us&dlc=&product=434551&rule=452#N628
 

2 more replies