Tech Problem Aggregator

Program hangs, when i try to open or save as a file In "excel" and "corel draw9" and

Q: Program hangs, when i try to open or save as a file In "excel" and "corel draw9" and

Hi every one,
I have Intel "DG31" and "core 2 do"
Program hangs, when i try to open or save as a file In "excel-2003" and "corel draw9" and "WILCOM Es9"
and in task manager it shows ?not responding?
But when i try to open it by clicking on the file using windows explorer it works quite well.
Earlier i used same programes on the "865glc" and "2.4" there was no problem,
I have also tried many Intel computers to trace the problem
i found the problem on every computer that was build on the motherboard later then Intel 865
Now what to do?
Mohammad Imran

More replies
Answer Match 132.3%

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

6 more replies
Answer Match 130.2%

About one month ago, a new problem surfaced:

Most times when I try to "Save As" a document and the application calls Windows Explorer for me to Browse where to save the file, it hangs for upwards of 60 seconds. The Browse window appears, but then I get a "spinning circular cursor" for 45-60 seconds until I can do anything. This occurs in all applications from MSExcel through Internet Explorer.

The system never completely crashes, but there is always this 60 second lag now.

The lag also occurs when I try to open a document...and to a less extent, but sometimes, when I simply open Windows Explorer (Windows Explorer is inconsistent as to whether it will give me a lag...sometimes it does work fine).

I have previously tried posting in the malware forum. I had picked something up they found...and cleaned it out, but that seems to have been completely unrelated to this as it was a virus redirecting my Google searches.

Can anyone help?
 

More replies
Answer Match 118.5%

XP Home (installed SP2 recently, which MIGHT have something to do with this?).

Just saved two word docs and a bmp file, all separately. All three times I saw that a new location has been added to the Save As drop-down menu. It didn't open to My Documents folder but was in the general folder list of the whole computer. The location was called "FTP File Locations." It's never appeared on the Save As menu before. This made me think of the file/print sharing control, which is now located in the Windows Firewall, but I don't use that Firewall, I turned it off to use Norton. What was FTP Locations? And is there any way to disable file/print sharing without using the Windows Firewall? (These may be the same thing, I don't know.) Also, in Network Connections, I thought I'd find file/print sharing control there, but now XP wants me to run a whole Network Wizard thing..I'm afraid I'll somehow set up a network instead! or enable all kinds of things..I don't want to create a disaster here.

(My son installed an FTP program months ago for work he was doing, but the program was removed. I just searched for it, it's definitely gone.)

This is a stand-alone, non-networked home computer.

P.S. I saved another Word doc and now it's back to opening to My Documents folder as usual..now I can't find the FTP Locations anywhere.
 

More replies
Answer Match 117.9%

In any application under Win XP, when I use a Save As or Open dialog box, and click the down arrow next to the location box to search for the folder I want, the application never responds. Usually, I have to click the arrow a couple of times and then it sort of wakes up and responds, or the application crashes (the title bar of the dialog box will say "Not Responding".

Often, in the case of the Save As dialog, it won't say Save As in the upper left corner, only an "S" will appear there.

Seems like a memory issue or else something corrupt in the system. Before I shell out $35 to MS to have them fix something that shouldn't be broken, can anyone help???
 

A:Sluggish/nonresponsive "Save-As" and "Open" dialog boxes

15 more replies
Answer Match 116.7%

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

12 more replies
Answer Match 116.1%

Hello everyone, I'm new on here so I apologize if someone has brought this up, but does Microsoft have any plans to update Edge to where it can "Save as" or simply "Open" a file rather than just downloading everything to the Downloads folder? I wonder why they left it out; seems like a basic function to input. Thanks!

A:Microsoft Edge: "Save as" or "Open" features

It'll come as many have requested this. Wait for updates.

3 more replies
Answer Match 115.8%

every time i try to open one of this folders a window apears with this content
cant have acces to C:\Documents and Settings\Mike\Local Configuration\{one of these folders} acces denied
this affects my IE i cant download nothing thru IE all my files on that locations i cant set dispaly pictures on WINDOWS LIVE messenger and all thinks that has anything to do with those folders
any suggsestions or idea
hope you can help me
pd ive scanned my computer and its all clean also i cant install windows XP serivce pack 2 im kinda stucked :/
 

A:cant open "temprorary files" "aplication data" "program data"

11 more replies
Answer Match 114.6%

When attempting to browse folders using Explorer opened from Start Menu Or left click on start button, Explorer will allow click on "-" to close paths, but hangs with hour glass if any attempt is made to expand any path or open any file. Explorer remains in this state until closed, at which time Windows asks if I wish to report the problem to Microsoft.
If I use the "My Computer" icon on the desktop to browse, all actions including access to networked resources work perfectly.
Can anyone please explain the difference between the two file browsing utilities and offer an explanation of the above?
My system is: AMD 3000; 2GB Ram Xp Pro with all service packs and updates. I am on a wired network with fixed IP addresses. Other network components are: Old Dual P350 with 0.5GB Ram running Windows 2000 (Explorer on this machine has no problems including access to networked resources); Buffalo 1TB Link Station; 2Wire ADSL router and HP LaserJet 1100 printer.
 

A:Solved: "File Explorer" hangs, "My Computer" does not?

8 more replies
Answer Match 114.3%

This has been happening the majority of the time for the last week or so. I've scanned for viruses, spyware, etc., but that isn't the problem. Whenever I try to save as, nothing happens. The hour glass comes up for about a half a second and then nothing happens. The same when I try to click browse or when I try to open a file, like pictures. This has never happened before except the last few days. I had a problem with spyware, but I've since installed zone alarm and firefox instead of IE explorer, which I had to do because I was getting an error on IE and it wouldn't open. I hope someone can help. Thank you.
 

A:cannot "save as," "browse," or "open."

Welcome to the forum.

1. Which version of Windows, to include SP?

2. Did the problem begin after installing / removing hardware / software, to include updates to AV & Windows?
2a. When was Windows last updated?
2b. Is your computer set to obtain Windows updates automatically?

3. Which tools did you use to scan for malware?

4. Can't save as, browse or open. Please explain. For example, what can't you open? Can you open notepad, type a few words, then save the file?

5. What kind of problems were you having with IE?

You're welcomed.

RF123
 

1 more replies
Answer Match 114.3%

I installed some software to assist me in converting .pdf docs. I didn't keep the name of the software but did uninstall it via control panel.

I now have mulitiple "File" menu entries: 29 entries between "open" and "save". The entires are all idenical, "Open PDF"

Nothing happens when I click on them. How can I remove them from my "File" menu?
 

More replies
Answer Match 114%

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

16 more replies
Answer Match 113.1%

Hey guys, I've a Toshiba laptop running Vista and just recently all of my desktop iconss have a recycle bin on them. Also since this happened whenever I try to save anything or open something from my computer and put it on the internet the internet browser (and save as/open window) will stop responding and I'll have to close it. Any help would be great!
 

More replies
Answer Match 113.1%

Ok I've had this problem for quite a while now and I really hope that someone can help me fix it. Pretty much, let's take microsoft word.

I click on "File" then "Open". Then in the box that pops up, there is a space near the top of the box that is right side of " Look in: " It usually says "My Documents" when popped up. But when I click on the little arrow that's pointing down to see a dropdown of where else I can save to, the program freezes and I have to do a ctrlaltdelete. The same thing happens when I click on "File" then "Save As" and I want to click the little arrow to see a dropdown.
Anything that I am doing for that box to pop up and if I click that little arrow the program freezes. WHAT AM I TO DO!!! HELP PLZ!!

Thank you for your time~
 

More replies
Answer Match 113.1%

My Windows XP, SP2 system has recently developed some problem behaviour:

For example, if I download an executable (say ppp.exe); open the containing folder using Explorer and "right-click" "open" on the file ppp.exe, the executable does not execute. Instead the Explorer window shows an "hour glass" cursor and the Explorer window shows the (not Responding) message in its title.

The only way to recover has been to power off the machine - the Windows shut-down sequence appears to be broken.

Similar behaviour occurs if I "double-click" on the executable.

If I boot Windows XP in safe mode, I find that I can execute the ppp.exe file with success, but this is cumbersome and recently I have been experiencing problems getting into safe mode.

Also, the "Add or Remove" program has stopped working - I get the "hour glass" hang during what should be a normal uninstall sequence.

I would appreciate help in getting my XP system back to working condition.

Thanks.

A:XP hangs on "right-click" "open" of .exe files

Hi,

First try a system restore to before this became an issue. Use this as a guide:
http://www.microsoft.com/windowsxp/u...w_03may19.mspx

Restore the computer to a day or two before this became an issue.

2 more replies
Answer Match 113.1%

When I press "open file" in the program "Business Intelligence" of an Office
program like Excel, I would like the window columns to be in "detail" view
instead of "list" view.
How can I do this?
Is this a registry default that can be changed?
Thanks,
Josh
 

A:Get "detailed" view on "open file" dialog window.

7 more replies
Answer Match 113.1%

OK guys, im kinda new to this forum, so... hello.
My computer has a not so serious problem-When I try to open Local Disk C by double clicking it says:
"
Windows cannot find install.exe.
This program is needed for opening filed of type 'File'.

Type in the executable file to be used instead:
_______________________________________
"

This problem isnt very serious, I just dont want my computer to remain "corrupt" if you know what I mean.

Help my and I will be grateful!

A:Cant open C:/:"Install.exe is needed for opening type of "file""

Hello and Welcome to TSF

Have you scanned your system for viruses lately? What antivirus program is installed on your system?

4 more replies
Answer Match 112.8%

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

8 more replies
Answer Match 111.3%

Ok, so basically, whenever I turn the computer on, 3 error messages appear:

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee.exe

- A virtual driver failed to inicialize DLL. Chose close to end the program. H:/Windows/system32/code/pRee1.exe

- Error loading H:/Archiv~/GBPLUG~/gbiehcef.dll. Couldn't find specific module.

(sorry if some terms are incorrect, my computer is in Spanish, to I tried to translate as best as possible)

Please help me solve this terrible problem, it is really getting me on my nerves! (oh, and if this helps, I've recently donwloaded this so called "Limewire acceleration", and whenever I ran the setup, it didn't work. I don't really remember the name of the website I downloaded it from, sorry...)

A:Can't Open "My Documents", "Trash" or other files in "My Computer"!?

Hi and Welcome to the forum

I am almost certain that you have malware problems. Most like caused by you doing file sharing/ P2P - Limewire.

Suggest that you go here and follow the directions:

http://www.techsupportforum.com/secu...oval-help.html

Please be advised that the malware people are very busy and it could take a couple days to assist you.

BG

1 more replies
Answer Match 111.3%

I thought I was computer savvy until this problem came up. When I double click my computer, recycle bin, control panel, etc, the hourglass comes up for a few seconds, goes off, and nothing else. No error messages or anything, just nothing. I have viewed a few of the threads covering this and a common link was the hijack this result. I have posted that here, and really hope that someone can help me with this. I have run SpyBotSD and adaware, I have run mutiple virus scans, I did an SFC, and the final thing was to repair windows using the original disk, none of which has help. I am running Window XP w/SP2. Any other suggestions would be certainly appreciated. Hope to here from someone soon. MTCS, out.

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\TDSTEL~1\ENTERN~1\app\pppoeservice.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Symantec AntiVirus\Rtvscan.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Hewlett-Packard\Toolbox2.0\Apache Tomcat 4.0\webapps\Toolbox\StatusClient\StatusCl... Read more

A:I cannot open "my computer" "control panel" "recycle bin", etc...

You may want to reinstall the operating system.

Backupthe files that are importantto you before you reinstall.

The "New" installation will overwrite the current one

If you do not format your hard drive before the reinstall the installation should not harm your files (That's why I suggest backingup your files) and will speed up the installation process.
 

1 more replies
Answer Match 111.3%

Hello there, when the desktop loads up, I get this strange message:

"Open With:

Choose the program you want to use to open this file:

File: Media"



Does anyone have any ideas why?

I have a screenshot of the programs which run at startup:



I have a HiJackThis log if it helps:


Code:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 08:28:24, on 29/05/2011
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16421)
Boot mode: Normal

Running processes:
C:\Windows\system32\taskhost.exe
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Logitech\SetPointP\SetPoint.exe
C:\Program Files\VIA\VIAudioi\VDeck\VDeck.exe
C:\Program Files\COMODO\COMODO Internet Security\cfp.exe
C:\Program Files\Acronis\OnlineBackupStandalone\TrueImageMonitor.exe
C:\Program Files\Acronis\TrueImageHome\TrueImageMonitor.exe
C:\Program Files\Common Files\Acronis\Schedule2\schedhlp.exe
C:\Program Files\Common Files\LogiShrd\KHAL3\KHALMNPR.EXE
C:\Program Files\HP\HP Software Update\hpwuschd2.exe
C:\Windows\system32\rundll32.exe
C:\Users\Media Centre\AppData\Local\Google\Update\1.3.21.57\GoogleCrashHandler.exe
C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Siber Systems\AI RoboForm\RoboTaskBarIcon.exe
C:\Program Files\Common Files\Microsoft Shared\Ink\InputPersonalization.exe
C:\Windows\system32\mspaint.exe
C:\Program Files\Mozilla Firefox\plugin-containe... Read more

A:Windows 7 32 bit, when loading "Open With: ?" "File: Media" comes up

There must be an error with one of the startup settings.
Please use Autoruns by Sysinternals/Microsoft to see more info about Programs loading with your system.
Pay attention to Logon tab.

Looks like for some reason it is trying to load a folder as a file. "Media" is a part of a folder path.
Try to uncheck all values,where Media is a part of the path.

Also, please check for viruses with Kaspersky Virus Removal Tool Download
or Malwarebytes : Malwarebytes Anti-Malware is a free download that removes viruses and malware from your computer

4 more replies
Answer Match 111.3%

I changed my outlook email .ost file to open with auto cad by mistake. Initially it was opening with an Unknown application. How can I enable it to open with an unknown application again? please help

A:changing an ".ost"file to open with "unknown" application

You can try this tutorial and see if it helps.

Default File Type Associations - Restore

1 more replies
Answer Match 110.4%

If the default program for an extension is wrong, I find it most natural to change it using the 'Choose Program' option on the 'Open With' menu from the context menu for the file. However, that stopped working correctly a few weeks ago. It is supposed to bring up a dialogue that allows one to choose another program and, optionally, to make that be the new default for the file type. However, what is happening now is that it goes ahead and invokes an irrelevant program (the Emacs text editor) which cannot handle the file. I never see the 'Choose Program' dialogue.

(E.g., I am trying to open a video file with a different player, and, when I click 'Choose Program', it immediately hands the file to Emacs, rather than giving me the chance to say I want to use VLC. (Fortunately, Emacs realizes that the file is too big for anything it can normally do and awaits verification before actually trying.))

I know I can still modify the association using Folder Options; but I would rather get 'Choose Program' working again if anyone can show me how.

Running Windows XP Home SP3 on a dual-core AMD Athlon computer with AMD 960G for graphics. (I think the TSG SysInfo would be overkill for this issue; but I will provide it in a reply if someone thinks it could help.)
 

More replies
Answer Match 109.8%

In the last 2 hours, I've gotten 2 messages like this:

One was for Google Chrome, one was for MSI Afterburner. These are both programs I have installed on both of my hard drives, so one hard drive is not the problem. The directories they point to are legitimate as well. However, I never pressed anything to get these pop-ups. What's even more weird, is that it says "SAVE AS", as if it's a download from the internet or something... is it a virus?

A:Random program "save file" popping up?

Hello Beolex and welcome to Seven Forums.

A few questions if I may. How long after installing Afterburner before you started getting these pop-ups? Same question for Google Chrome. Did you download and/or install any other apps (like Afterburner Remote Server, etc) that could now be interfering? Do the pop-ups just appear on screen while the computer is idle or do they appear only when you're using the keyboard for routine tasks? Did you assign any hotkeys to Afterburner or Chrome that could now be throwing out these pop-ups?

If you haven't already done so, update your installed anti-virus suite and run a full scan. You could also use these free on-demand scanners to make sure something didn't slip past your primary suite. (No anti-malware product is 100% effective 100% of the time. If there was such a thing we'd all be using it. So using more than one tool is never a bad idea.)

Malwarebytes

ESET Online Scanner

HitmanPro

SuperAntispyware

2 more replies
Answer Match 109.5%

Greetings!
For all my Microsoft Office products (Office 2010), when I go to initially save or open a file, the default location is the Documents folder. I rarely use this opting instead for a specific folder on my dedicated Data drive (in this case my E drive). Is there any way to change the default location? Note: I am NOT asking to move the documents folder to a different location. I am interested in using a different location altogether. Is this possible? I am using W7

Thanks for you help again,
Pradhan
 

A:Solved: Changing folder in which "Open/Save File" lands

Go to File, then Options, then click the "Save" button, and change the "Default File Location" option. You may have to do this for Word, Excel, Powerpoint, etc... separately though.
 

2 more replies
Answer Match 109.5%

Just a few days ago I noticed a strange problem. I was downloading a program with Firefox (latest version) and the download dialogue froze up when I opted to save the file. I thought Firefox was being buggy, so I closed it and reopened, but the problem persisted. My next step was to reboot. No luck. I ran a full virus scan with Norton, and downloaded AdAware to see if spyware could be causing a problem. I was clean. I later found that if I just wait a really long time, the dialogue box to choose the file's location eventually comes up. After this, the problem seems to be gone until I reboot. In other words, once I wait forever for the box to pop up, the next time I download something it pops up instantly like it should. I unfortunately noticed that this problem wasn't unique to firefox. I clicked to add a file to my Winamp playlist, and the same thing happened. Winamp froze and a few minutes later the Open File box popped up and everything was fine. It also happened with AIM when I tried to send a file to a friend. This problem was very annoying to google because the combination of words describing the problem comes up with irrelavent hits. I'm very computer literate but this problem confounds me. I'd appreciate any help or insight. Hijack This log available upon request.
EDIT: I'm running WINXP SP2 fully updated to my knowledge, and my computer specs are listed.
 

A:Programs freeze when "Open/Save File" dialogue is opened.

uninstall the program you downloaded...what was it ?...see if that straghtins out the problem...no joy uninstall firefox and reinstall it...somehow in the download it got corrupted
 

2 more replies
Answer Match 109.2%

Disable "Do you want to open or save file" on ie11

Hello,
Our intranet\internet application has to open some xml templates that are displaying as word documents.
I want to by pass the open or save file bar that comes up at the bottom of the page.
I am looking for a solution that I can apply to 300 users.

How I Disable "Do you want to open or save file" on ie10/11?

thank you

More replies
Answer Match 108.3%

Hopefully I'm posting in the correct forum section and that this isn't a topic that has been discussed frequently as I've done extensive searches and browsing before deciding to post.

So here's the problem/annoyance I'm encountering and I'm wondering if there's some sort of solution out there:

I have Vista Home Basic and IE7. I can download files quite fine, but the problem is that when I try to open the file either from the dialogue window that shows up after the download OR when the file opens automatically after a download, a new dialogue window shows up that says "Verify" (apparently while the system verifies the file for who knows what).

Now, that window showing doesn't really bother me that much, even though it does bother me, the real problem arises when you download multiple files at the same time and open those files because once the system tries to verify all those files at the same time it ends up crashing the browser.

So what I'm mainly looking for is a setting that would disable this file verification by Vista/IE7.

I have a fairly good computer, with 2GB of RAM, 2.20 Dual Core processor so I really really doubt this is a performance issue.

Thanks.

Can provide screenshots if needed.

More replies
Answer Match 108.3%

Hi,

After a power outage a particularly important file gets the error "Excel cannot open the file.xlsx beacause the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file. The file format has not changed. Is there a safe free program that can uncorrupt a file? I have tried Open and repair, changing the format, and using open office. Also tried using recova but the file was not lost.
 

A:Solved: Excel 2007 spreadsheet gets error "Excel cannot open the file .xlsx.." How ca

https://support.microsoft.com/en-us/kb/820741

and 5 ways are shown here http://www.wikihow.com/Recover-a-Corrupt-Excel-File
 

2 more replies
Answer Match 108%

I emailed myself an essay, and instead of saving the file, i just pressed "open". Now after a couple hours of editing I can't find the file anywhere on my computer. Is this file gone forever, or is there still a chance of finding it?
 

A:Pressing "Open" instead of Save - where does the file go?

Did you access your email from the web (example: yahoo mail), if so, those attachments will be stored in the internet temporary folder, if you're using Internet Explorer, click tools > internet options > (under temporary internet files) click settings > view files, then you should be taken to a folder, usualy (C:\Documents and Settings\<your user name>\Local Settings\Temporary Internet Files) , try looking over there.
Note: The files will still be there unless you have cleared your internet cache.
 

3 more replies
Answer Match 107.7%

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

1 more replies
Answer Match 107.1%

I just got a new Hewlett Packard computer with Windows XP. The CD drive is a combo CD reader, writer and DVD. The main reason I need it is to backup my many documents, database programs (RootsMagic family history, Quicken, etc.), photographs and drawings. The pre-installed burning program on the computer is Adaptec's (I think) Sonic RecordNow!, which is useless for my needs because of the way it works. The HP tech suggested I download DLA to enable me to use "drag & drop" through Windows Explorer, but I haven't had much luck with that, either. What I need is to be able to use a CD-RW as a giant floppy - to add, delete, copy, edit and move files, just as I do on my regular floppies, using "drag & drop" through Windows Explorer, or "save as...". What software do I need for this? Please use "baby-talk" with me, because I don't understand any of the initials, terms and technical language I see all over these forums. Thanks, Dellasha
 

A:Data backup and storage to CD-RW's using "Drag & Drop" or "Save as..."

The most versatile program for that is "Nero"
The latest version Nero6 Reloaded is a bit bloated, maybe the NeroMIX will do better for you. Read the specs here: www.nero.com

The part that interests you specifically is InCD.
 

5 more replies
Answer Match 107.1%

Hello everyone
Recently, I'm playing Anno 1404 (also called Dawn of Discovery) in my Vista Home Basic 32bit finely until I saw the problem with the "save/load" problem. First, it saves "systematically" but, the save is corrupted to a 5kb file. Second, the game can't load the 'properlly saved' save file, and also the corrupted one also.

Few of the players had the similar problem, and someone said that making another user account works, and I tried and really worked for me. Yes, I can play this way, but all of my files and infos are saved in the Administrator account, and I don't want to switch users just to play that game

Recently I found a useful MS program, which is runas, and found how to run as another account. It asks for the account pw, and everythis was fine, but it doesn't run my game
It just closes the cmd and nothing happens. What could be this problem?
I hope Ubi gives out this fixing patch fast

A:Anno 1404 "save/load" problem and using "runas.exe"

Figured it out with Runasspc program (which also saves the password! )

1 more replies
Answer Match 107.1%

Hi,

I have a Toshiba r700-181 (PT310E) work laptop. It is running Windows 7 x64 Enterprise.

It has one 4GB stick of ram which is PC3 10600. Windows works fine with this.

I have obtained a 4GB stick of ram which is PC3 12800. With just this one in, Windows works fine.

However, if I have BOTH sticks put in, the BIOS recognises that there is 8GB installed, but Windows fails to boot.

It gets stuck at the "Starting Windows" screen. If I restart it asks me if I want to start windows normally or to run the Windows repair. If I try that I get the message: "Error: 0xc0000225. The boot selection failed because a required device is inaccessible."

I tried using a Windows 7 System Restore disc but that doesnt work...

If I try either of the sticks in the laptop one at a time, then Windows 7 boots up fine.

Is this just down to the laptop not being compatible with the mixture of speeds? I thought that if they were mixed it would just use the lower speed by default?

So confused

A:Laptop hangs at "Starting Windows" or getting "Error 0xC0000225"

Hello borito, Welcome to SevenForums!

Is this a laptop provided by a company you work for by any chance?

9 more replies
Answer Match 107.1%

I am hoping that someone can help me with what may be a complex question.

I have a spreadsheet, similar to the demonstration file I have attached. In it, there are a range of columns. One set of columns (A - D), shows a list of numbers that are references to items in a store, and it also shows their location in the store, so it acts as a floor-plan. The next column (E) lists those items again to show the dollar amount that those items have produced in total sales (F).

So, what I'd like to do is to add a conditional formatting to show me the "cold" and "hot" spots on the floor-plan so I can see where sales are most concentrated. I would assume that this would be done with a colour scale (using the range of values in column F to work itself out)?

Either way, the figures in column F would change weekly, so the relevant cells in columns A - D would need to automatically change when they're matching cells in column E - F change.

I hope this makes sense, as it's difficult to explain, but any help that someone could provide would be greatly appreciated.
 

A:Solved: Creating Cell "Cold" And "Hot" Spots Based On Values In Microsoft Excel 2007

16 more replies
Answer Match 106.8%

I have a chart in an Excel spreadsheet, and it has several "series" in it. Some of the series are charted as "lines", and some are "areas" that fill in the entire background of anything from 0 to the value I have entered.

I have one particular series that is showing up as an "area" but I want it to be drawn as a "line" instead, so it DOESN'T fill in the area below it. I currently have the "background" as "none", but now I have a line from the last value down to "0", and that's what I want to avoid...

Thanks in advance!
 

A:Solved: Excel 2003 - how to change a chart data series from "area" to "line"??

8 more replies
Answer Match 106.8%

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

14 more replies
Answer Match 106.5%

I'm young, so bear with me, I don't know a lot of technical computer terms.
I'm on my moms laptop, which she let me bring with me to my dads house, and I downloaded Manycam last night to screen share with my friend. Today, something that I assume was a virus, in the form of a virus scanner, popped up, called Win 7. It kept telling me to buy their product because my computer was at risk. I showed my dad and he told me to download Malware, and I did and did a real virus scan. I had 26 virus (At least 6 trojan), which were all removed. I rebooted her computer and tried to open Firefox. It told me "Choose the program you want to use to open this file" The only reasonable one was IE so I chose that one. IE opened and started to load but it closed out, and it told me "Do you want to run or save this file?" I chose run, and then it told me "Do you want to run this software?" I chose Run. Then the whole process started over, and there was no end. The same thing happened when I tried to open IE. I tried to reboot the computer again, but no luck..

Any solutions? (I have until Tuesday to fix this)
 

More replies
Answer Match 106.5%

Hi,
AVG recently detected and fixed a malware problem, but now whenever I try to open something, I get an "Open with" box that says "Choose the program you want to use to open this file". This happens with everything I try to open. Firefox, AVG, explorer.exe, etc.
I have no idea how to go about fixing this, so any help is greatly appriciated.
Thanks.

Not sure if it's needed for this problem, but here's the system info.

-----
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4095 Mb
Graphics Card: NVIDIA GeForce 310M, 512 Mb
Hard Drives: C: Total - 119234 MB, Free - 12224 MB; D: Total - 342703 MB, Free - 280155 MB;
Motherboard: ASUSTeK Computer Inc. , K50IE , 1.0 , BSN12345678901234567
Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled
 

A:Solved: "Choose the program you want to use to open this file" box opens with every p

7 more replies
Answer Match 106.5%

My Drive C:\ won't open upon double click on it. Prompted an error "This file does not have a program associated with it for performing this action. Please install a program or, if once is already installed, create an association in the Default Programs in control panel."

It appears that whenever I click the C: drive, it is defaulted to "CMD" instead of "open". When I right click the C:\ the first selection listed is CMD instead of Open.

I am using Sony Vaio, Windows 7 Ultimate OS and 64-bit.

Looking for your expert advises. Thanks

More replies
Answer Match 106.2%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

6 more replies
Answer Match 105.9%

Greetings!

I have an XP machine which I only ever user myself (as in, there are no other users on the machine, no guest account, and it logs in without a password).

I'm trying to sort out my expansive and bloated Start Menu Programs list, but it seems that there are two separate lists. One for "Joe" (the main user account) and one for "all users", I guess because some programs give the option of installing for just one user or for everyone.

All of the programs show up in the Start Menu when I click on it, but when I go into Windows Explorer to try and sort them out, there are two separate folders;

C:\Documents and Settings\All Users\Start Menu\Programs
C:\Documents and Settings\Joe\Start Menu\Programs

I know I can move them around in these folders (ie; putting them in related groups, such as "system tools" etc), but can I move all of them from the main user to the "all users" folder, (or vice versa) without any problems?

Thanks!
~Joe

A:[SOLVED] Merging &quot;user&quot; and &quot;all users&quot; start menu program lists

Yes, you can consolidate them all in one, or slit them up as desired.

1 more replies
Answer Match 105.9%

I can't do anything with my computer because this window pops up every time now. "choose the program you want to use to open this file" PLEASE understand I know nothing about computers and if its to difficult then let me know if I need to go out and buy a new laptop. Although this one is just two years old. Thanks for any help
 

A:Solved: I have this "choose the program you want to use to open this file"

See post number 4 here: http://forums.techguy.org/windows-vista/999751-solved-cant-run-programs-shortcuts.html
 

2 more replies
Answer Match 105.9%

Thank you for your help. Sometimes when I want to move a folder, I receive the following message:

"The action can't be completed because the folder or a file in it is open in another program..."

This is frequently caused by a Thumbs.db file, which I believe generates thumbnail images. Is there a way to prevent Windows from locking these files, so they can be moved, without disabling thumbnails completely as explained above?

A:Get "open in another program" error when moving file

Hi hrstud, a slightly different problem that I have, but I too am also looking for an updated Version of Unlocker, (in my mind the best software (free), for just the problem you're having. It worked perfectly in XP, but as far as I know; there's no updated version (in the works). Someone mentioned Lockhunter but so far that hasn't worked the way Unlocker did. I find that if you have the preview pane opened, you can't move the file, so I have the preview pane closed when I'm moving files/folders around. Something you might want to try.

Aloha

2 more replies
Answer Match 105.9%

Whenever I try to move or rename files (or anything else that would change something about it), I frequently get the message "The action can't be completed because the file is open in another program." The thing is, it's not open in any program.

It usually happens immediately after it was open, though. It also usually happens with movie files. So, I'll watch a movie file, close WMP and try to change the filename, and it'll give this message. I have to wait for about two or three minutes before I can change it. It's very frustrating to have to wait every time I need to change a file. Is there a way to fix this?
 

A:"The action can't be completed because the file is open in another program"

7 more replies
Answer Match 105.9%

Hello,

We had some type of virus on our desktop computer. It kept warning us we were under attack and kept popping up boxes for us to subscribe to fix it. I finally somehow got our AVG antivirus open to scan and it quarantined it. The problem now is that everytime I click on internet explorer or any other program that uses the internet, a box pops up that says "Choose the program you want to open this file."

When I choose internet explorer, another box pops up saying "File Download - Security Warning" and asks "Do you want to run or save this file?" When I hit "run" it just opens up the previous "Choose the program you want to open this file" box again ... and this just goes round and round in circles !!

Please note that I am older and a real computer novice so I don't understand a lot of the jargon on this board. I have Ad-Aware installed and it finds nothing. And the AVG anti-virus already quarantined the problem.

Any help would be greatly appreciated !! I'm at my wit's end!

A:Around in circles ... "Choose program you want to open this file"

Hello and Welcome to TSF

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools,
then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.


I would like to see some logs before we proceed, so please follow the steps here then post back with the required logs.

Thanks

2 more replies
Answer Match 105.6%

I am having a goofy problem with .doc and .xls files. If I attempt to open them from either Windows Explorer or My computer, I get the "This file is already open" error but then you can then change the file and save it.
However, I can then execute the application and open the file from within the app, it works fine and doesn't give the error.
Any help would be appreciated. I have found traces of this error on the internet but have not found any satisfactory solutions to it. Thanks

A:"File Already Open" when Word or Excel file opened with WinExplorer or My Comp

Have you tried closing word then clicking start/run and typing

winword /regserver

Type this one for excel.

excel /regserver

3 more replies
Answer Match 105.3%

my boss only know how to use google chrome, and he usually save websites in his own document library, and he always use "right click mouse > save as" to open his own document library directory, and sometimes he will save some pdf, but when he tries to open an pdf file through google chrome with right click > save as, he can only see file with html extension. any one can help to add "all files" in the drop-down menu next to "Save as type" in google chrome, so he can see all files types when he right click > save as through the google chrome browser.


Thks in advance

More replies
Answer Match 105.3%

We've been having a LOT of difficulties with Vista on our laptops recently.  The bootup process goes relatively fast until it gets to the "please wait" screen just before CTRL-ALT-DEL would normally appear.   The laptops can sit here for 10 minutes or 10 hours.  No rhyme or reason.  Nothing in the event log says anything about what it is trying to do.  Everything seems normal except this LONG wait at "Please Wait..."After some experimenting, I determined that if I disable the "Network Location Awareness" service, everything works fine.   Better than fine actually... everything is faster than ever.  Boot up takes 45 seconds from power on to the CTRL-ALT-DEL screen.My question is, why all of a sudden is this an issue?  Why would NLA cause huge hangups and delays on boot?  By disabling it, it seems to be fixed, if not better than before.  If I leave this disabled, is it going to break anything else?   Minded, we are a school district.  We have a local network.  No internet acess unless through a proxy.  Relatively simple network setup.   2008 servers.  1 domain controller.Ideas?

More replies
Answer Match 105.3%

Computer infected with "Phoenix Toolkit Website 4" rootkit/trojan virus identified by both Norton Anti-Virus and Webroot SecureAnywhere. Although the computer is having no symptoms of spyware (besides the search engine highjacking that no longer occurs) messages of blocked threats continuously pop up from Norton Anti-Virus.

Windows 7 Ultimate
Intel i7 860 CPU
8.00 GB DDR3

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:01:58 AM, on 12/26/2011
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16421)
Boot mode: Normal
Running processes:
C:\Program Files (x86)\Norton AntiVirus\Engine\17.9.0.12\ccSvcHst.exe
C:\Program Files (x86)\Ralink\Common\RaUI.exe
C:\Program Files (x86)\iMesh Applications\MediaBar\Datamngr\datamngrUI.exe
C:\Program Files (x86)\LP\4919\93C.exe
C:\Program Files (x86)\Real\RealPlayer\Update\realsched.exe
C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe
C:\Program Files (x86)\73949\lvvm.exe
C:\Program Files (x86)\BitTorrent\BitTorrent.exe
C:\Program Files\Webroot\WRSA.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Program Files (x86)\Norton AntiVirus\Engine\17.9.0.12\MCUI32.EXE
C:\Program Files (x86)\Internet Explorer\iexplore.exe
C:\Users\Zohair Razvi\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\2HOUF0NM\HijackThis.exe
R1 - HKCU\Software\Microsoft\... Read more

More replies
Answer Match 105.3%

Hi TechGuy,

I'm having some recent problems on my laptop. When I log-in and start using it, the performance starts slowing down. When I look at the Task Manager, I notice that the task called Explorer.exe takes up a lot of my CPU. In a couple of minutes, I also start getting Internet Explorer windows to pop-up on my screen (I normally use Firefox) with advertisements suggesting that my computer is infected and some software downloads that could help. I recently installed McAfee Total Works, or whatever they call their 10-in-1 software which is supposed to do it all. I ran several scans, and on some of them, if did find and disable the Generic.dx trojan. Even though it claims it is doing something, I don't notice any changes - Explorer.exe continues to bog me down, and the IE windows keep popping up to the point that I cannot use my computer effectively anymore.

IBM T-40 laptop (about three and a half years old)
Microsoft XP-Professional

Any pointers would be truly appreciated!!

Thanks,
Sandjosh
 

A:Solved: "Explorer.exe" process keeps running, IE Windows intermittently open, "Generic.dx"

16 more replies
Answer Match 105.3%

I have searched to see if this was asked before without any success. Maybe someone has run into this problem before.
When I open "my computer" or "control panel" after I close it...it automatically goes into Internet Explorer as a blank page. Most of the time, when I close the IE blank page...it stops responding and I have the control-alt-delete to "end the program"
Thanks in advance for any help.
 

A:closing "my computer" or "Control Panel" open internet explorer window

Possibly malware - anything openning ie on its own raises an alarm in my books. Post a HJT log to the malware removal section of the forum and let the experts take a look at it
 

3 more replies
Answer Match 105.3%

Just this really. And then I have to go to task manager and close it down and open it again but I can't get any work done as I can't save anything. I just installed the windows 8.1 patch two days ago. Any ideas anyone?

A:Word stops working when I press "save" or "save as"

Hey tra,

Go into control panel's uninstall programs section, find office, and select 'change'. Click repair, restart, and let me know if that helps.

5 more replies
Answer Match 105%

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

2 more replies
Answer Match 105%

Hello

I recently got the XP Defender Rogue virus on my PC. Between looking online to manually delete the malicious registry entries in Safe Mode and using Malwarebytes software, I was able to remove the virus.
However, now I receive the "This file does not have a program associated with it" error whenever I try to open applications.

I have downloaded the reg edit fix file from the Doug Knox site and extracted it to my desktop however, when I try to launch it or "Merge" it, I still receive the "This file does not have" error, even in safe mode.

Is there another way to repair my registry, or is this something else ?

Thanks

More replies
Answer Match 105%

Hey guys,
 
Recently my beautiful windows 8 "Open file using ____ program, colorful app menu" has been replaced with the old file helper box which gives you 3 options: Search the web, read about file type, use existing program.  I am not sure what made this change, though recently I downloaded a few windows 8 video players to test out opening .gp files. I did download Malware, which I believe I deleted and am now stuck with this.  If I choose "Search the web for program" I am directed to this filesolver.com website, if I choose "Use existing program" it does absolutely nothing.  
 
I updated java, as I thought maybe this would help, but now when I try clicking on a file and "Open with", the file helper just flashes open and closes.
 
My question is, how can I get that windows 8 app program search function back?  I have been searching high and low to no avail .
 
I dont know any better way to describe this, but let me know if I can explain in further detail.
 
Thank you so much ahead of time for your help.
 
Bret

A:Windows 8 - Open File Using Program "App"

Hey guys,
 
This post is regarding my last post about this problem.
 
I think a better way to put it is, I am unable to select which program I want to open unrecognized files with. The windows 8 'open with' app interface is not functioning and i cannot use it at all.
 
Please help!

21 more replies
Answer Match 104.7%

I have a nested "IF" statement that inlcudes the "OR" function because I have more than 7 logical tests. One of the logical tests looks for two fields to be true in order to return the "value if true". If either or both fields are false, then the "value if false" is returned, in this case zero. When the value of the first field is correct, but the value of the second field is not correct, zero is returned, which is the "value if false" and a correct return.

However, when both fields are false, the formula is returning the word "FALSE" instead of zero.

The attached file shows these returns and the formulas. Cells F2-7 are corrrect returns (highlighted in green), while cells F8-11 are not correct returns (highlighted in red).

Any ideas on how to return the "value if false" (zero) in cells F8-11 would be appreciated.
 

A:Solved: Excel 2007 - Nested "IF" formula using "OR" Function

8 more replies
Answer Match 104.7%

Well, that's it really.

I'm using Excel 2007 and when I right-click on a cell or row, the "cut" and "copy" options are greyed out. I can still work using the toolbar menus and icons, or the shortcut keys, so it's not a big problem, but I'm not comfortable with the context menu not working properly.

This happens in all workbooks, including brand new ones. I've looked through the Excel Options but can't find anything.

Any ideas?
 

A:Solved: "Cut" and "Copy" greyed out in Excel's context menu

15 more replies
Answer Match 104.7%

How can I lock the "Now" or "TODAY" or "Date" FUNCTIONs IN Excel 2003?

This seems like it would be a simple solution as everybody that deals with Excel, at some point, would be interested in not having the dates you have entered with either function "Today" or "Now" NOT automatically change to the current date and time when you reload the workbook. But if it's a simple fix, I sure haven't been able to figure it out yet. Help!!!!!!!!!!! Go ahead and show me and make me feel like an idiot...

zjoeyx
 

A:Solved: Locking "Now" or "TODAY" FUNCTION IN Excel 2003

9 more replies
Answer Match 104.7%

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

9 more replies
Answer Match 104.7%

HI,
i got infected with "vbs" through someone's usb, i ran "Flash_Disinfector", then installed "kaspersky 7", scaned the whole computer, it also deleted vbs trojan. However, after that when i tried to open my computer by clicking on its icon, it did not open, i tried to open it fron strat up, but the result was same. all others like my documents etc were all right, i open my computer through my documents, opened my c drive, when i tried to open further any folder present present in the C drive it gave me the error ( i am including the error meggage in attachment), howerever all my folders were not having any shortcut sign & it was same with all folders present in all my drives, but when i wrote the name of the folder in the address bar, it opened normaly, so now i cannot open my computer through its icon plus all the folders present in my hard drive. please help me to sort this thing out.

A:infected with "vbs", used "Flash_Disinfector" & folders on hard drive unable to open

Hello and Welcome.

We want all our members to perform the steps outlined in the link I'll give you below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

---------------------------------------------------------------------------------------------

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Please note that the Virus/Trojan/Spyware Help forum is extremely busy, and it may take a while to receive a reply.

1 more replies
Answer Match 104.7%

Windows XP SP2

Ok, I tried some things in other threads but to no avail. But some threads are having my same problems. First this about:blank crap is always my home page even if I change it, as well as these porn links in my favorites list. I've run scans with 5 different virus/ adware scan programs but it doesn't fix it. However, it got even worse-- I can no longer open things like My Computer, My Documents or even Control Panel to try and uninstall software. When I try to open any folder my computer freezes temp. and I get the following message: "DrWatson Postmortem Debugger has encountered a problem and needs to close. We are sorry for the inconvenience."

PLEASE Somebody help me. I have hijack this, if that helps. AHHHHHHHHHHH!!!!!!
 

A:Solved: I can't open anything "Dr. wtsn error" & I can't remove "blank: about" adware.

14 more replies
Answer Match 104.7%

I just resolved an issue I had with the wireless connectivity of my Acer notebook computer and now I am getting strange error messages. When I try (not every instance) to open device manager I will get the message "Failed to open empty document." From there I will occasionally get "Parser" messages that say "Value creation failed at line 843" or "line 422." I read what I could find about these messages and it points to MMC as the cause. How do I go about fixing this annoying problem if anyone knows?
 

More replies
Answer Match 104.7%

infected with "vbs", used "Flash_Disinfector" & folders on hard drive unable to open
________________________________________
HI,
i got infected with "vbs" through someone's usb, i ran "Flash_Disinfector", then installed "kaspersky 7", scaned the whole computer, it also deleted vbs trojan. However, after that when i tried to open my computer by clicking on its icon, it did not open, i tried to open it fron strat up, but the result was same. all others like my documents etc were all right, i open my computer through my documents, opened my c drive, when i tried to open further any folder present present in the C drive it gave me the error, that is,this item "1002931234.vbs" that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly. Do you want to delete this shortcut? Howerever all my folders were not having any shortcut sign & it was same with all folders present in all my drives, but when i wrote the name of the folder in the address bar, it opened normaly, so now i cannot open my computer through its icon plus all the folders present in my hard drive. please help me to sort this thing out.

dds


DDS (Ver_09-12-01.01) - NTFSx86
Run by Nadeem_Ahmad at 14:54:49.54 on Sat 03/13/2010
Internet Explorer: 8.0.6001.18702
Microsoft Windows XP Professional 5.1.2600.2.1252.1.1033.18.1975.1542 [GMT 8:00]

AV: Kaspersky Anti-Virus *On-access scanning disable... Read more

A:infected with "vbs", afte "Flash_Disinfector" all folders on hard drive don't open

Hello buct,

It will require more than 1 round to clean the system. Please stay with me until given the 'all clear' even if symptoms seem to abate.

Download ComboFix from one of these locations:

Link 1
Link 2


* IMPORTANT- Save ComboFix.exe to your Desktop

====================================================


Disable your AntiVirus and AntiSpyware applications as they will interfere with our tools and the removal.


====================================================


Double click on combofix.exe & follow the prompts.

As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's strongly recommended to have this pre-installed on your machine before doing any malware removal. It will allow you to boot up into a special recovery/repair mode that will allow us to more easily help you should your computer have a problem after an attempted removal of malware.

Follow the prompts to allow ComboFix to download and install the Microsoft Windows Recovery Console, and when prompted, agree to the End-User License Agreement to install the Microsoft Windows Recovery Console.

**Please note: If the Microsoft Windows Recovery Console is already installed, ComboFix will continue it's malware removal procedures.




Once the Microsoft Windows Recovery Console is installed using ComboFix, you should see the following message:





Click on Yes,... Read more

10 more replies
Answer Match 104.4%

This is not really a problem, more like a nerdy technical question, since I like being informed about the goings-on in my PC. I hope I posted it in the right section, since IMVU would probably fall more under "game" than anything else.

I have always been curious as to why would the developers of the chat client IMVU decide to have the program install within C:\Users\[username]\AppData\Roaming\IMVUClient (previous versions did so under "Documents and Settings") instead of "Program Files" or "Program Files (x86)" on Windows... I am also curious if this unconventional choice could potentially make my PC vulnerable to attacks.

Now, the program works fine AFAIK, but I'm puzzled by this. I'm the kind of user who likes having the choice of installing apps in a drive other than C: (to free space in C:, for portability, etc.), and who gets nervous when apps do not install or behave the way that I'm used to.

I was told by someone more knowledgeable than me that it was probably a lazy way to get around administrative install rights in Windows Vista and Windows 7. He also added that the cache data of the program shouldn't be in Roaming when there is no upper limit or even default size set on it.

And yes, this has been asked on their forums, but no staff member ever answered it (only a forum mod, who didn't have a clue).

Any ideas? Or am I being overly paranoid?

Ed.
 

A:IMVU Installed in "AppData\Roaming" instead of "Program Files"

7 more replies
Answer Match 104.4%

I am trying to uninstall Yahoo Messenger using Add/Remove Programs. It won't let me and this error message comes up.

Can someone help?

Thanks...and have a great day! Note: Just registered and first time poster.
 

A:Solved: Error: "Could not open "INSTALL.LOG file"

You have most likely run a Cleaning program that has the option to delete LOG files.
Some LOG files are just that. Files that "log" activity.

But some, like the one you reference, contain information about how to UNinstall that application.

In this case, I would reinstall Yahoo Messenger, and THEN uninstall it.
 

3 more replies
Answer Match 103.8%

I don't know if I am explaining this correctly, but at the top, you have FILE EDIT FAVORITES TOOLS HELP. When you click on "File" and a window opens and one of the choices is "Open". In this area you can type an address that IE will open for you. My question is how to clear everything that ever typed there?
TY
 

A:How to clear "file" - "open"

8 more replies
Answer Match 103.8%

Hope this query is in the right section -tried to use my LDS 1881 England Census CDs last night - but having problems with the Viewer.

I have V4 which up to now has worked perfectly - tried to re-install it
and I keep getting "Failed to extract file "Dll_ini" from binary table"
error message.

BUT no problems on my laptap which has the Viewer installed from the
same CD.

Have had a few problems with computer of late - it was in the workshop
3 weeks ago because of some corrupt Windows files - could that be the
problem?

Grateful for any advice, suggestions as to what to do!
 

More replies
Answer Match 103.5%

Hello guys,

I don't know what I did, but nothing happens when I click on those two things in the search bar:

View image: wtf

I reinstalled Windows a few hours ago, and IIRC pressing those with the mouse lead somewhere. Now when I click on them, it does nothing. I have to type in "Settings", so I can click on the actual Windows App. Then I can navigate to those settings. IIRC those results were "clickable".

Can somebody help?

Thanks in advance!

A:Can't open "Windows Update Settings" or "Check for Updates"

Hello iamnewhere,

If you like, here's a Windows Update shortcut to use for now until hopefully an update will sort it for you.

Windows Update Shortcut - Create in Windows 10

3 more replies
Answer Match 103.5%

When I right click on my C & D drive in My Computer the Open and Explore words in in odd characters and clicking on them does nothing. This happened after I used a USB key on another computer that had these characters. How do I fix this?
 

A:Solved: Right Click C Drive "Open" &amp; "Explore" in odd characters

8 more replies
Answer Match 103.5%

I have looked around for help on this issue and havn't been able to find a resolution that works. I think because I havn't been able to find any imformation on my specific issue.

I am one of the most computer literate people I know, so when a co-worker mentioned to me that he was having problems with his computer, I agreed to look at it. His problem was simple, he had a lot of viruses. I have cleared most (however I assume not all) viruses and instinces of spyware. The computer worked fine for a little while while I did some final checks on his computer, then the problems started.
He has a Dell Inspiron 710m Laptop, running Windows XP Pro. (Service tag 8sk8091)
As far as I can tell, he has not added or upgraded it in any way. He only has some basic programs.

I know that the issues might have something to do with his wireless.
He is running the Intel® PRO/Wireless 2200BG.
The computer is getting stop errors (BSOD)

The first one was called DRIVER_IRQL_NOT_LESS_OR_EQUAL Stop: 0x000000D1 amd listed the file w29n51.sys (which upon further study, turned out to be a file related to his wireless.)

I have already updated the drivers and reinstalled the program with the latest versions on the Intel website.

I also noticed (though with not frequent) the stop error with the same name and stop code, but which listed the NDIS.sys file (which upon further study turned out to be a system utility).
and now, I have gotten a stop error of 0x0000000A, (IRQL_NOT_LESS_OR_EQU... Read more

A:Solved: Windows "logs off" after "open with" repair (userinit.exe)

16 more replies
Answer Match 103.5%

when i right click on my DVD writer i do not get the options "OPEN",EXPLORE & AUTOPLAY"..How do i bring them back?
 

More replies
Answer Match 103.5%

safe to assume its impossible to remove the "open" and the "merge" entries from the context menu? I figure if i want to open or merge them i would simply double click. Clutter and redundency in this vein dont suit me :P

A:remove the "open" and "merge" entries from context menu?

Open I don't think so, Merge sounds like it is added by a 3rd party program, and likely can be removed. Have a look at ShellMenuvVew and ShellExView from NirSoft. You can remove entries with both. But Open will not be listed, and I have seen no way to remove it. A Guy

2 more replies
Answer Match 103.5%

For some time now, double clicking on a folder no longer opens it as usual. Instead, double clicking on a folder causes a separate Explorer Search window to open, with that folder's name under the "search in" tab. In fact, when i right click on a folder, the first and bold-faced option is "search", as opposed to "open". So to open any folder I have to right click it and hit open, which is slow and annoying. I cleaned out my registry, spyware, viruses, everything, and still this problem persists. I also checked the Mouse control panel, nothing there.

Anyone know what's going on with my computer?

A:Help! Double-clicking on folders prompts "search", not "open"

Hi

Open "My Documents", go into Tools>Folder Options and under General>Browse Folders choose Open each folder in the same window. Save that and then goto View>Explorer Bar> and click Folders.

See if its better now.

10 more replies
Answer Match 103.5%

Using Word 2007, I am unable to pin the "New" and "Open" Word Document to the Start Menu. I was able to do this in XP and Vista. I go to "All Programs" and can load Word but cannot find the options new/open. In Word I go to "Word Options" and it is not listed there either. Thanks.

A:Pinning "New" and "Open" Word document to start menu

  
Quote: Originally Posted by ADKR


Using Word 2007, I am unable to pin the "New" and "Open" Word Document to the Start Menu. I was able to do this in XP and Vista. I go to "All Programs" and can load Word but cannot find the options new/open. In Word I go to "Word Options" and it is not listed there either. Thanks.


ADKR,
I note that you have posted this question in Microsoft's Discussion Groups - Windows 7 - Word 2007 in Word General Questions.
Some reasonable replies were given to you that you didn't respond to. Did you actually try them?


This Tutorial written by our Brink would seem to be a reasonable alternative for you to use.
Quick Launch - Enable or Disable

1 more replies
Answer Match 103.5%

Hi all,

So I'm kind of stuck.. I currently have the problem where I am in an endless cycle of "loading files" -> "Windows Boot Manager" (see: How To Boot Into Safe Mode On Windows 8 (The Easy Way)).
I have tried to load all of the options -- and none successfully load.
I also end up at a OneKey Recovery as well.. unfortunately, the laptop does not have initial backup or user backup images.
I have a Windows 8 CD for repairing purposes.. however, I cannot load the BIOS/UEFI to change the boot order to load the optical drives first. I have also tried to remove the CMOS battery to fix it.. did not work. .
Also - Windows Boot Manager:
Windows Setup [EMS Enabled] -- does not load properly (leads to OneKey Recovery) Safe Mode (does not load properly) Safe Mode with Networking (does not load properly) Safe Mode with Command Prompt (doesn't load - tries to boot and load all files onto partition that is too small.. can't change partition?)
Enable Boot Logging Enable Low-Resolution Video Debugging MOde Disable automatic restart on system failure Disable Driver Signature Enforcement Display Early Launch Anti-Malware Driver
Start Windows Normally
Any ideas would be greatly appreciated! Thanks!

More replies
Answer Match 103.5%

Ok so I'm using a custom visual style made by another user however I don't really like the buttons used that I mentioned above. The creator states it is acceptable to change the theme to however you like as long as you don't redistribute it anywhere.

Ok so I opened up the .msstyles file (using Restorator) located in the theme folder of this VS. I went into the images directory and located what seems to be the images used for the buttons. Intuitively, it seems like it would make sense to replace those images with different ones (perhaps from another visual style) and it should change them. However, would this actually work? Could the theme get messed up in some other way (like proportions or something if the new button images are smaller)? I don't know of any other way to change them that would be easy.

But I did run into another problem. For some visual styles I can't even locate those buttons in the images directory. Where else would they be?

A:Changing the "minimize" "maximize" and "close" buttons of a theme

Use Windows Style Builder to do that...

9 more replies
Answer Match 103.5%

I am using Windows 7 on my laptop and I have question about when to use "Home", "Work" and "Public" profile.

If I am logging in without setting password, and I am logging in network with "Public" profile, then will any other user, who can see my computer, be able to enter my computer and check the contents on my computer ?

I am connecting to a network and there are 6 other users connected to this network. In the set network location window, if I select the netwoek as "Home", does it mean that other 6 users will not be able to see my computer on network and if I use "Public", then all other six users will be able to see my computer on network ?

Thanks

More replies
Answer Match 103.5%

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

5 more replies
Answer Match 103.5%

Hi everyone!

Yesterday my HP laptop (Windows 7) started getting BSOD with various types of errors (mostly "STOP: 0x00000F4", "STOP: 0x0000007A", "c00021a" and one "missing %hs, c0000135"). Most of the time it restarts without any issues and works fine right after the BSOD and then an hour or two later I get a BSOD again.

I have tried restoring to Last Known Good Configuration, startup repair, hard disk check, virus scans and I also uninstalled any recently added programs I could think of and cleared up more than 50% of my hard disk space. None of these seem to have helped and I still get BSOD regularly.

I have attached the folder from the SF Diagnostic Tool and would appreciate any advice!
Thank you!

A:BSOD every few hours: mostly "STOP: 0x00000F4", "c00021a" & "c0000135"

Welcome to the forum.

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).
------------------------
Upload a screenshot using: CrystalDiskInfo For how to upload a screenshot or file, read here
Test your Hard Drive(s) by running: Hard Drive Diagnostic Procedure
------------------------
Test and Diagnose RAM Issues with Memtest86+: RAM - Test with Memtest86+


   Tip
Pay close attention to Part 3 of the tutorial "If you have errors"
Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


------------------------
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:Piriform - Speccy
CPUID - HWMonitor
For how to upload a screenshot or file, read here

Code:
*******************************************************************************
* *
* Bugche... Read more

5 more replies
Answer Match 103.5%

Example sentence: vrytim I prss ths kys, nothing happns. Now I'm writing with my on-sreen keyboard. I'm clueless when it comes to computer stuff. How do I fix this? Is this a software problem, or a hardware problem?Help is much appreciated!

A:Kyboard deos not respond to the keys: "e", "d", "c" and "3"

My keyboard hath the thame problem with the thupid eth key. The blathted thing ith driving me nutth.

All theriousneth...er...seriousness aside, usually, that is a hardware problem. Can you find or borrow another keyboard and see if it will work correctly on your machine?

6 more replies
Answer Match 103.2%

This is driving me bonkers and I have almost no hair left. I really hope someone can help.

When I attempt to copy or move a file or folder from my Win7 box to my WinXP (SP3) media server, the operation nearly always fails. Take, for example, my trying to copy the VLC Media Player folder (704 files, 75.1 MB) from Program Files on Win7 to the C: drive on the media server via a mapped drive (X). In all cases, after hanging up at some point during the copy, I get this message:

Network Error
There is a problem accessing X:\<whatever current sub-folder copying is>
Make sure you are connected to the network and try again

I should note here that you only see the message come up if you wait for it (~1 min) after the copy hangs. If you try to cancel the hung copy before the message comes up, you can crash explorer.exe. I must also stress that there are no other access problems on the network. Files on the media server are accessible as expected from the Win7 box. Performing the same copy in reverse ("pulling" the same folder to the XP box from its console instead of "pushing" from Win7) works perfectly. All machines are in WORKGROUP and the same exact credentials are in use on all machines. All machines run the same version of Symantec Endpoint Protection and have firewall rules configured to allow all LAN traffic. All machines are connected through a Linksys SD2005 5-port GB "dumb" switch. Routing/DHCP is provided by a D-Link DI-604. ... Read more

A:Win7 "workstation" to WinXP "server" file copy FAIL

Same thing happens in my LAN between both Seven Ultimate x86 and x64 and a XP Pro SP3 file server, and also no problem copying from a Toshiba U200-182 laptop with Seven Pro x86 (Upgrade disk from Toshiba)to the same xp machine, also note that there is a normal transfer speed between al Seven platforms....

6 more replies
Answer Match 102.9%

I've seen numerous stuff on this online and most tell you to empty your temp internet files (done...folder's empty) and make sure the "Do not save encrypted pages to disk" option is unchecked in the "Advanced" section.

Both are done. My Temp Internet Files cache is set to 250MB, so I know it's neither full nor too small.

All was working fine until recently and I can't really think of much that could have caused the problem. Would any of the protections in SpyBot S&D cause this? Suggestions?

I found that trying to reinstall IE is like pulling teeth.

No problems with any other graphics programs or Netscape, so the issue is limited to IE.
 

A:"Save As" in IE only allows me to save as a BMP, "untitled" file.

First of all :wave:Welcome to TechSpot:wave:

Secondly the search feature is your friend...

http://www.techspot.com/vb/topic2323.html
 

3 more replies
Answer Match 102.9%

The subject message pops up any time I attempt to open my IE8 browser using Windows XP and set to my home page "ATT.Yahoo". When I click "OK" in the message, IE closes and tries to recover, but with the same results each time. I know
there is a method to reset IE9, but can't tell if it also pertains to IE8 since it can't be opened.

A:"Microsoft Visual C++ Runtime Library" "Runtime Error! Program: C:Program Files\Internet Explorer\iexplore.exe"

Hi,
the first step in troubleshooting IE issues is to test in noAddons Mode.
toolbars.google.com - download and install the latest IE compatible version of the Google Toolbar.
for consumer help with IE select the Help>Online Support menu from IE and follow the prompts for your windows and IE versions. thx.Rob^_^

3 more replies
Answer Match 102.9%

re-sending this message (4th time). As 1st time user of this web site, just
realized I've been entering wrong info for "Title"....sooooo...sending again..

System: Windows 98 4.10
Excel version 7.0

Problem: getting error message when try to open 2 Excel files...2 other ones
open just fine! Never had this problem before!!
ALSO....when click on Help on tool bar in Excel, same thing...
can't open the selections in the drop-down box!!

ERROR MESSAGE: bill list.xls: file format is not valid
PLEASE HELP!! What has changed OR what have I done to cause this to
happen all of a sudden??
THANK YOU!!
 

A:Excel file won't open.."file format not valid"

Hi

I replied to your original posting on this.

It sounds like the file is corrupt.
 

1 more replies
Answer Match 102.6%

I have Internet Explorer 7 with my Windows Vista Home Premium and I have two probelms:
1. I can't use the save target as function, it is always disabled. My mouse will be over a link and in the status bar it will show a direct link to a file, but I still won't be able to do it.
2. The Content Advisor has been eneabled sinse I got my laptop and I can't get the password to turn it off, as I didn't set it. It gives the hint "Dell" every time.

If you can help me it would be appreciated.

More replies
Answer Match 102.6%

Whenever I perform a "Save As..." or a "Save File" (e.g. with an email attachment), the pop-up save menu always defaults to NOT displaying the navigation pane(s) showing the existing folders/files in the target folder - see thumbnail below left.

To view the folder tree and folder/file list (see thumbnail below right), you have to click on the "Browse Folders" button at the bottom left.

Is there a registry hack or other setting that will reverse this setting for me?

P.S. This problem appears to occur when the application uses the standard Win7 explorer for the save - when using Photoshop, for example, it happily displays the folders and images etc.

A:How to default to "Browse Folders" on "Save as.."

Which version of Internet Explorer do you have? Is it 8, 9, or 10? I only have 8 and I didn't see any way of changing this in there and mine does not do what yours does, so I'm thinking that you have either 9 or 10. If you do, then I will install the version you have and take a look.

You see, this kind of thing can be changed in other browsers like Firefox, and it has been possible for as long as I can remember (several years).

5 more replies
Answer Match 102.6%

When attempting to restart through the "start/shutdown" screen, the system begins to restart then hangs on the first few lines, right after "detecting IDE drives". When I cold boot, I get the same hang, but it does work 1 out of 10 tries. Please help, what test can I try, what log would you like.

thanks

Mark
 

A:2000 hangs on "restart", does "Reboot" 1 in 10 tries

7 more replies
Answer Match 102.6%

This is a question regarding a computer that intermittently ?hangs? at ?sign out?. When it hangs, the screen goes black and no commands are possible. The only recovery is to depress and hold the power button. The computer is a laptop Toshiba Satellite L55-C5272 that was purchased in March 2016 and came with Windows 10. Again, the ?hang? randomly occurs during sign out and will occur maybe 1 or 2 times every 20 sign outs. No other operating problems have been noticed. I have tried to isolate the source of this problem but no success. I have run a ?sfc? scan and no problems were detected. I have run the DISM tool and no problems were detected. I have disabled the anti-virus and the hang still occurs. The primary programs and applications that are installed are: ESET anti-virus, Office 2010, Firefox browser, and Goggle Earth. No games have been installed are run. Of course some games came with the system but none has ever been activated. The system has been rebuilt 3-times in an attempt to rectify the problem. As additional info, the ?hang? has occurred during sign out after a period of no usage after a restart. Any guidance on isolating and/or correcting the problem would be appreciated.

More replies
Answer Match 102.6%

I have Windows XP Pro., sp3.

When you install a new program, what determines where it is listed: All Users>Start Menu>Programs or "user name">Start Menu>Programs?

reoneill
 

A:What determines if a program is installed under "All Users" or "user name"?

Usually some of the programs give you an option to install it under your user name or for all users during the setup process. So say if I was installing (CVTae) a resume programming on a Windows XP computer it will after the installation process ask me if I want to install it as all users (so it will show up on the all users start menu so everyone can see it) or just for me. That's where you can decide for yourself where you want to install it.

'So usually it's the user's choice of where it's listed in most cases, but certainly not in all cases.

Hope that helps mate.
Dan
 

1 more replies
Answer Match 102.6%

I was looking at these freeware AntiVirus program's to replace InoculateIt. The Company is ending InoculateIt support in May.
:
"Avast!" (ALWIL Software); "AVG" (Grisoft)
:
Both seem to get pretty good ratings, and I was thinking of getting one of them, then getting Norton AntiVirus when I have the extra $$$ available.
:
Any opinion's as to their ability to stop unwanted stuff from getting in, ease of setup & use would be appreciated.
One thing I've noticed is AVG only issues updates monthly--and I think Avast! is the same--is this often enough to effectively defend against new virii?
:
Will be using whichever one I get with ZoneAlarm (Freeware) Version 2.6.231
 

A:"Avast!" and "AVG" Anti-Virus program's. Opinion's?

7 more replies