Tech Problem Aggregator

Garbled startup screen, windows logs on but screen stays black.

Q: Garbled startup screen, windows logs on but screen stays black.

Hello everybody, today my laptop has become blind. Let me explain:

My laptop was purchased in 2007
Specs:
Alienware m9750
Dual nvidia 7950 go
Dual core 2.0
2 gigs of ram
80 gb harddrive

So here's what happened, today I was watch s movie on netflix when suddenly my screen goes black. Though I had crashed but my laptop was still on and the sound was still going. restarted, and the initial screen was slightly pixellated and garbled. Which has now made my laptop permanent garbled and pixely. After the windows logo. My screen goes black, but I am still hear the windows start up sound. I found that I am able to click on some music files on my desktop that are able to play, so this is a video issue. I reboot in safe mode which works this time figure to disable and uninstall the videocard drivers. I restart and I'm able to use my pc somewhat normally( still garbled). Reinstalled the nvidia drivers then halfway through says: error install failed or something, it happen really fast then crashed, tried restarting atleast 20 times in safe mode but it freezes up after it tries to load partition(1)\windows\system32\drivers\mup.sys

All of the other options for start up(even last settings to work) the screen goes black after the windows logo. I have tried tinkering with the bios but it doesn't help. Its basically being blind using a computer. So I'm wondering if there is anyway to possibly blindly open up command prompt and possibly disable or uninstall the drivers from there, I'm about 80% sure that the drivers are just corrupt because they were not able to finish and removing them would do the trick.

I know this is kinda long but I would greatly appreciate any help or input. Thanks!

More replies
Answer Match 100.38%

Hi, I just joined here and Im having a really abd problem with my computer. The specs (that i know for sure) are:

ECS k7SEM motherboard
Nvidia GeForce 6200
192 mb of ram DIMM 168-pin (not sure what brand)
AMD Duron 855 MHZ

I booted my comp a few dyas ago and out of nowhere I get a BSOD before that screen with Windows XP comes up. I say to myself "ok, maybe its just one time" and reboot. I get it yet again and reboot. I finally get to the windows log in screen and I get ANOTHER BSOD after it finished loading. Restarted again, worked fine. I analyze my minidumps and it said the most probably cause of these crashes was hardware.

At this point I recall a computer technician saying the capacitators on my mobo were bursting, but this was a good 8 months ago, so Im not sure if its FINALLY giving out or if my RAM thats failing.

Well, everything goes well and I turn it off. I come home the next day and I get another set of BSOD's, only this time, theyve gotten worse. Im now getting 3-4 BSOD's and my system completely freezes over causing me to reset. Wierd thing is, when I reset without turning the comp off it goes by fine. Its when I turn it off and turn it on that I get this BSOD's. It seemed to me that the BSOD's and constant hang ups would get worse by day, like if something is slowly dying.

I eventually got tired of them and stop using my computer for a couple days. Today I try turning it on and the screen stays on standby, like if its not even... Read more

A:BSOD's on startup, screen stays black and wont respond.

Blue screen error messages are one of the most misunderstood error messages out there in regards to windows.According to Microsoft, only 5-20% of these errors are actually caused by the OS. Only 10% are hardware related. The other 70% are the result of faulty drivers or software incompatibility. Based on those numbers, less than 15% of blue screen errors can be permanently resolved with an OS reinstall.

So we can correctly solve this issue we need to get the minidumps. (if the computer is bootable)

To get the Minidumps do the following

1 > create a new folder on the desktop and call it "dumpcheck" or whatever you like
2 > navigate to %systemroot%\minidump and copy the last few minidump files to that folder.%systemroot% is normally c:\windows. They are numbered by date. You can paste that address in address bar to get there.
3 > close the folder and right click on it and select Send to Compressed (zipped) Folder. Please do NOT compress them in .rar
4 > use the "Managed Attachments" option under "go advanced" upload that zip file here as an attachment.
 

3 more replies
Answer Match 95.34%

When I start windows normally, it get color distortion like this http://puu.sh/NXuz
And then it black screens. In safe mode everything is okay. The things that use same resources http://puu.sh/NXtn
Here is cbs log ( i can't read it)
http://www.mediafire.com/?6hrb8t0qhkdmbbr

Thanks for any help
I repeat, in safe mode it works normal, so i suspect driver clash.
 

A:Windows 7 Colors distortion and black screen upon welcome screen (pictures and logs)

Update or reinstall the video drivers.
 

1 more replies
Answer Match 92.82%

I was attempting to watch a pornographic video that I searched for on google and the video would not play. Instead, it prompted me to update my flash player. Me being the genious that I am, I downloaded flash.player.hd.v10.0.exe. Immediately after I downloaded it, nothing happened and the video still did not play. That's when I knew I was screwed. Apparently, this has caused other people problems as well, (I got this info from a google search, so it may be unreliable). A couple of days after this happened, (for some reason I ignored the problem), Mcafee did an update that required a restart. After the restart, my computer stayed on the black screen with the loading bar that says microsoft corporation beneath it for longer than usual and went black. I waited for a while and it stayed black. I then rebooted in safe mode with networking and tried to search for a solution. I frantically made several assumptions, one of which was that Mcafee was the problem, so I uninstalled it. A couple of sites recommended Malwarebyte's anti malware. I scanned my computer, (it took about an hour and a half) and it came up with three problems. I clicked fix or something, I can't remember, and it quarantined them. I then restarted and experienced the exact same irritating black screen. I can only operate in safe mode. Any help would be much appreciated.

Note: I ran root repeal several times and it never made it through a full scan.

dds.txt

DDS (Ver_09-10-13.01) - NTFSx86 NE... Read more

A:Windows freezes/stays black before the welcome screen.

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

3 more replies
Answer Match 92.82%

I have an hp pavillion 9000 laptop. Its running windows vista home premium edition. I turned on the computer and it was showing me a message telling me whether i wanted to start in safe mode or repair window. I chose the repair window option. It did the window start up repair and then there was a message that told me if i wanted to restore to a previous time. I chose a date that i knew the computer last worked perfectly. It did the restore and then said it would restart.

It stayed on a black screen with a flashing underscore on the top left side. I waited 2 hours and it never restarted so i turned it off and then turned it on. It starts to load brings up the screen with a loading bar then it goes into a black screen and just stays there.

I tried loading it in safe mode and it loaded. Was able to back up my information. Restarted the computer and still the same just a black screen. I have searched all over but cant find a solution.

A:Windows will not load. Stays at black screen.

Worth a look, http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01997899&tmp_task=solveCategory&lc=en&dlc=en&cc=us&lang=en&product=1842189

Louis

Typically...black screen with blinking cursor in XP can be resolved by running the fixmbr command from the XP Recovery Console. Since you have an HP system, you may not have the RC.

5 more replies
Answer Match 92.82%

my screen stays black and shows the mouse icon and won't load my home screen?

A:my home screen won't load up my screen stays black and shows the mouse

Hello,

Try booting the PC into Safe Mode. Start your computer in safe mode

If successfully able to boot into Safe Mode try running a System Restore back to a date when it was working properly

1 more replies
Answer Match 90.3%

I've been having this problem for a couple of weeks now. When I turn on my computer it loads up to the black screen with the windows logo and the loading bar with the scroll across green thing. It will just stay on that screen until i turn it off. If i turn it off and turn it on again it will bring me to the screen that allows you to choose safe mode and other options. It will load on safe mode but if i try to turn it on again without safe mode it gets stuck on the screen. So I do a system restore and choose a few days back and the system restores and i can startup my computer just fine. However everytime i shutdown my computer it has the same problem of not getting past that screen. What can i do?? Thanks for your help.

A:During Startup Computer Stays On Windows Loading Screen

Hi and welcome to Bleepingcomputer.
Try running chkdsk while in Safe Mode.
Go Start > Run and type CHKDSK /F /R
you might need to reboot. If that doesn't work go to My Computer, Right click on C drive, Find the tools tab and click it then click check now.

With Regards,
Extremeboy

7 more replies
Answer Match 89.88%

Hey Guys,



I have just installed a new Corsair SSD and for some reason after the windows animation the screen stays black for around 15 seconds and then goes onto the log in section. I am unsure what is causing this but any help would be appreciated. This is a fresh windows install and I have got all of the required drivers. The SSD is going through an Intel SATA 3 socket with ACHI enabled. I have disabled the Marvell adapter and the ASUS boot screen to try and speed things up but it doesn't seem to make a difference.

I know my SSD is working fine as it is blazingly fast once I am in windows. I have the latest BIOS for my motherboard as well.

Video Link Windows 7 hangs after animation - YouTube

My components are:

Sabertooth P67
Intel i5 2500k
Corsair Sandforce 3 60GB
Seagate Barracuda 500GB
Corsair Vengeance 2 x 2 GB
AX850
GT240

More replies
Answer Match 89.04%

Hello,

I have been having this problem since a week or so. Broni has helped me in malware forum to rule out malware as responsible. My machine is clean and I was refered here for further help.

Here is my problem:

At boot-time, I see windows XP load screen with the progress bar, the progress bar advances to the end and then, the screen turns pitch black and all is see is an arrow cursor I can move around. I thought until yesterday that this was a permanent freeze-up, but if I wait, say, 6 minutes, the black screen disappears and windows then starts normally.

Last week, problem was intermittent, it now happens all the time.

Windows boot-up was fine before.

Please help me.
 

A:Windows load screen at boot, looong black screen, then normal startup

I had this tons of times with my old XP PC. It is normal if you have a lot of files on the HDD and you have little RAM. How much RAM do you have? What is the capacity of the HDD? And do you have the Windows XP disc? Would you be willing to upgrade the RAM and/or the OS if we must resort to that? Or would you rather just buy a new PC?
 

62 more replies
Answer Match 88.62%

Hi all !
i have a problem with my pc , it randomly freeze at startup getting me black, white or distorted screens . after 1 min the pc reboot and all go normal.
this problem can come 2 or 3 times at the same time.
after the pc finish his reboot it get me an error
like this : Firma problema:
Nome evento problema: BlueScreen
Versione SO: 6.1.7601.2.1.0.256.1
ID impostazioni locali: 1040

Ulteriori informazioni sul problema:
BCCode: 116
BCP1: FFFFFA800B26C010
BCP2: FFFFF8800FECBAE4
BCP3: FFFFFFFFC000009A
BCP4: 0000000000000004
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
and if i go on operative center it get me this :
Firma del problema
Nome evento problema: LiveKernelEvent
Versione SO: 6.1.7601.2.1.0.256.1
ID impostazioni locali: 1040

Ulteriori informazioni sul problema
BCCode: 117
BCP1: FFFFFA800AF2F010
BCP2: FFFFF8800F6579C8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
ID bucket: X64_0x117_Tdr:2_IMAGE_nvlddmkm.sys
Informazioni sul server: 9e4f5a19-5833-40b9-9f92-05c83b20360d

here are the information that i see in the bsod post introduction

.OS -windows 7
.x64
.its an assembled pc by me and i ve installed original win 7
.Full reatil version
.the system have ~ 1 week .. i have upgrade it from an old one created by me 1 year ago
.the OS has ~ 1 week ( i have re intsalled it after the upgrade)

cpu--> i7 2600K ... Read more

A:BSOD (black screen and windows startup screen freeze

Ok 116 error is caused by your Graphics card.
First thing to do is update your drivers from the NVIDIA website.

If BSODs continue Try HDD tests,
download gpu-z to check if your card is getting too hot, also is there lots of dust in the card?

Do you overclock your video card?

6 more replies
Answer Match 86.94%

Hello there,

So as the title says, I'm having some problems with my computer. I bought it about 4 weeks ago, and no issues with it other than when I try to play an MMO that would make the graphics card work. The graphics card that is installed in the computer was separately bought and installed, so I'm thinking it might be conflict issues with the card, but I don't know.

The way it happens is, I run the games, I can play for anything from a minute, to 15mins and then my screen says it has disconnected from the image, goes black, and I can hear my computer restart, but my screen stays black. I have to manually power off and back on for my screen to start showing images again. Once restarted i get the "Problem Event Name: Bluescreen" thing.

It's really annoying since I just bought GW2 and I can't play properly any help would be appreciated.

Also, in the Action Center it's said that my Nvidia Graphics Card has stopped working or crashed, multiple times, naming the exact times my computer crashed.. which is why I believe it has to do with my card.

A:BlueScreen playing MMO's. Screen Goes Black, Restarts and Stays Black

Code:
BugCheck 116, {fffffa800cf0e010, fffff88010aee630, ffffffffc000009a, 4}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+ade630 )

Code:
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Oct 02 19:21:13 2012 (506B3099)
Follow these steps:STOP 0x116: VIDEO_TDR_ERROR troubleshooting
Overclocking -
I recommend if you are overclocking any hardware, that you reset these values within the BIOS to their default values in order to increase the stability of your system.

Please run the following tests for your graphics card and RAM:
RAM - Test with Memtest86+
Run Memtest86+ for least 7-8 passes, and preferrly overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Graphics Card:Video Card - Stress Test with Furmark
Read all the steps within the hardware test tutorials very carefully,... Read more

9 more replies
Answer Match 85.26%

hey i have just been given a computer and when given was working but would freeze nearly all the time, so i formatted it and it still froze alonmg the way, i have just recently changed the ram and it has not work so i put the old stick back in and it wont work at all now, the screen just stays black, please help
 

More replies
Answer Match 85.26%

When Windows 2000 boots up into the network logon screen, the screen appears all black and garbled. The text appears very shrunk and almost impossible to see. It takes several reboots for it to come up correct. The Compaq startup screen before this comes up perfect. Its happens randomly and on any type monitor that is used. Has anyone else seen this?
 

More replies
Answer Match 84.42%

I recently did a hitmanpro, piriform cc cleaner, part of defrag, and when hitman pro rebooted my computer it now logs to a black screen when I log in. I tried doing a restore point, but nothing. The desktop and stuff shows up in safe mode but in regular mode it's just a black screen with a cursor and I have to manually start explorer.exe through task manager. What do? x-x

A:Windows 7 64 logs to black screen- have to manually start explorer.exe

Hi and welcome to SevenForums,

If Hitman Pro rebooted the PC it was because if was trying to clean some malware, right? Then I guess Hitman Pro is stuck/failing or the infection is preventing the PC to start.
If you don't have a system image backup you can restore, you can try using a rescue disk to clean your system. For example Download Kaspersky Rescue Disk 10

Another thing you can try is Using Last Known Good Configuration - Windows Help

1 more replies
Answer Match 84.42%

I've had this before but can't remember what I did to stop it
It Is exactly like you pull the dvi/hdmi lead out of monitor/gpu everything still working i.e. if playing video on youtube it carries on playing just no picture.
I think it was something to do with Intel's built in gpu, but I have disabled it everywhere I can think of bios, device manager etc.
Can anyone through some light on this please as it's startingto annoy me now

My rig specs in sig.

A:Random black screen, rig stays on !!

When does this occur? At random? Only when videos/games are playing? Also, what is the exact behavior? Is the monitor giving off behavior as if it has lost its video source, like an error saying the source was lost or it is switching through different connections to find one? Can you tell if your system is locked up, or if it's still accepting your input? The best way to determine thsi is to have the display lost when playing a video, then pressing a key to stop/start playback.

If the monitor is acting like it's not connected to the PC, then it can be a bad video port on your card, a bad/loose video cable, or the monitor itself has a bad port or is just plain bad. You will want to start with potential physical suspects before dabbling with software. Have you tried actually running the video through your onboard video (make sure to enable it and stuff of course) instead of your graphics card and see if that worked?

9 more replies
Answer Match 84.42%

Hi. My computer was running fine and then suddenly the screen went black.  I turned the power off and on and it came up with error message "Unmountable Boot Volume" and then tried to fix the problem but it just stayed on the black screen and never fixed the problem.  I turned it off, done the hard reset where I take out the battery and hold the power button for fifteen seconds but it is still the same. I have gone into the mode where I can try to restore the computer but it does not allow me to do that. It say's it is restoring and then just stays black.   I have also ran a report where it says the problem is "Hard drive Short DST Check: Failed" and gave me a code of 0SNHWW-7N987K-MFPWMG-60WF03. If there is anything that can be done to help me I would really appreciate it as I use this laptop for work and really need to get it back up and running urgently with minimal cost.  Many thanks for your help

More replies
Answer Match 84.42%

Yo.

Well, here's my problem; I've recently upgraded my Graphics card, Ram and Motherboard, and whenever I switch the power on, all the fans start up, but nothing appears on the screen. I unfortunately have no other DDR2 ram, PCIE cards or a motherboard that TAKES PCIE >.< So I can't test any of the components on their own, plus the motherboard has no on-board graphics.

I've had a look at the POST guide, and nothing from there appears to work. I've also tried disconnecting everything except the ram, graphs card and CPU, but again no change. Could it be that my Ram is faulty/incompatable? Fauly Graphics card? I know my CPU works because I've tried it in another computer, and it runs fine.

Any help would be appreciated. (It might take me a while to reply, sorry if that's the case.)

Specs:

MotherBoard: Asus P5B SE

LGA775, intel P965 + ICH8, Intel Core2 Quad-core CPU FSB 1333, Dual-ch DDR2 800, 6x SATA 3Gb/s, Gb lan, 6-ch HD audio, crash-free BIOS3, EZFlash2, Q-fan.​
PSU: EZCool ATX-450 JSP (450W)

CPU: Intel P4 3.2 Ghz

Ram: LD 1Gb PC-800 64*8 16c

1 GB DDR2 PC2-6400 DIMM 240 PIN 800Mhz​
Graphics card: ATI Radion Para-Souls x1650

PCIE 512mb 128BIT DDR2​
 

A:All fans come on, but screen stays black.

HDD seems to be active, and the drive reads the disk. I tried clearing the CMOS, no luck. Sorry, RMA?

Also, I have a 20 to 24 pin extention on my PSU, would that effect it?
 

5 more replies
Answer Match 84.42%

After the screensaver automatically turns off the display (after 20 minutes), the screen STAYS black, no matter what I do it won't turn back on. I have pressed buttons on the keyboard, mouse, and turned the display on and off. I have to hard reset my computer... it sucks man! What is going on? I looked in the power options and sleep is on 'never' and turn off hard disk is on 'never'. I was looking for hypernation, but I couldn't find it anywhere. I deleted my hybernation files a while back because they were taking up space and I never had used it.

This has just started fairly recent, when I got my new video card (eVGA 9800GTX+ 512MB) it started doing it, but that is around the same time I deleted my hybernation files, that is why I suspect it, but I can't find anywhere to enable or disable it. I checked in power settings under advanced and it isn't there.

I have Windows Vista Home Premium 32bit

What's going on? I need help, this is driving me nuts, I am hard resetting my computer almost every day because of this. I don't want to shut off automatic display shutoff because my Acer X191W monitor gets hot and I like it to cool down when the screen gets shut off. (In the past I had this same model of monitor burn up on me, don't know why, but I suspect heat. This thing gets really warm after a couple hours. They sent me a new one for free then, but my warranty is up now.)

Help please,
Thanks,

Bushpilot
 

A:Screen stays black after screensaver

I would have to agree that deleting your hybernation files is probably the cause. Since they are only needed if you allow your computer to hibernate, there must be another step to shutting it off. It does seem like you checked the right places though. I would assume it would be in your power settings.

You might want to check you BIOS though. If it's disabled there, I'd think you'd be ok.

GL
 

2 more replies
Answer Match 84.42%

hello, this is ecobill. i am new in the neighborhood. I know a little about computers (enough to be dangerous); so, I need help once in while. Whenever I have trouble it is never the normal problems.
Because I lost the printer drivers and USB drivers on my present computer when I updated to XP Service pack 2 and I have been able to install them from any locaton.

I have received a used, but more updated computer. I was told it worked, but there was no rack for the hard drives that matched the screw holes. I adapted an old rack and when I turn on the power with the monitor attached, there is nothing but a black screen. The power supply appears Ok, because some of the lights come on; the hard drive is running; and the fans come on the motherboard and video card. The monitor is OK because I used it on another older computer. Also when I just unplug the monitor from the video card, the screen comes on. I tried another older video card in one of the shorter card slots, but it did work either.
Any ideas out there? Thanks
 

A:Monitor Screen stays black

Monitor stays black

I don't know how to reset the cmos unless you mean to pull the battery. I don't know about the BIOS bus for the video (I can't see any BIOS) settings. I removed the original AGP video card that I thought might be a problem and I put an older working video card (Trident) in another PCI slot and this made no difference. I pulled the RAM chips to clean the connections and reset all cables. I disconnected the CD drive, the floppy drive, and later the hard drive after checking each situation indiviudally, but this made no difference.

Another problem (may be related) is the on-off switch does not control anything. I have to use the toggle switch in the back. I checked the wire connection from the switch to the motherboard (Intel D845BG) and it looked OK.
Thanks
 

2 more replies
Answer Match 84.42%

2 months ago,my HDD IDE died because of "the click of death" thingy and now, recovers itself (its kinda weird),the windows starts normally,i couldn't hear any clicks from my HDD anymore but after a few days,when i restarted my PC properly (i restarted it from the "start menu")...here goes the "new" problem...i restarted my pc,my system info appears (the RAM and the video card thingy),then,the ASUS motherboard logo appears...and after that...a blinking underscore appears in a black screen...after a few seconds,the "blinking underscore" finally disappeared BUT my screen remains in blank and black and stays there forever,it didn't even reach the windows loading screen.I did tried to disconnect and connect my cables from the motherboard,i even tried to disconnect and connect my HDD from the motherboard and did the same with my video card and RAM but it didn't solve the problem.
WHAT IS REALLY THE PROBLEM?...IS IT THE WINDOWS OR MY HDD?

BTW EITHER OF THE TWO SAFE MODES ARE FREEZING WHEN I HIT "ENTER",
I'VE ALREADY CHECKED THE BIOS BUT IT SEEMS IT DETECTS ALL OF MY HARDWARE.

any help will be appreciated,thanks.

More replies
Answer Match 84.42%

I got a new graphics card today (GTS 450) and I slotted it in, when I start it up the screen stays black, however, if I leave it for 20 seconds or so I can hear the windows start up sound.. I know my screen isnt gone because I've connected it to my laptop and it works fine. I have the Blue and White cable plugged in my monitor and my computer and still nothing, thanks.

A:Computer screen stays black

Do you get any signs of "life" (like the BIOS Info screen etc)
If so it's probably a driver issue (did you remove the old drivers before the switch) ?

If not, there are IMHO only 5 possibilities:
#1 The card wasn't seated properly -- reseat it
#2 The card draws more power than your PSU can handle -- get a better PSU
#3 you forgot to connect the extra power cable --connect it
#4 you bend one or more pins in the video cable -- replace
#5 The card is defective -- RMA

-DG

1 more replies
Answer Match 84.42%

Ok so about a month back my lcd just stopped working. It has a lit background but it stays black. I called hp and they had me do some troubleshooting but it didn't work and they said my display was no good anymore so we left it there (I didnt want to pay all that money to fix it). About 3 days after that it magically worked again but one day it seemed like it was trying to go out again the picture got real grainy for a second then it went back to normal. Now I'm back where I started. I've tried everything, when I hook up an external monitor it works so it has so be lcd related. Any help/advice??
 

More replies
Answer Match 84.42%

I just reformatted and installed Vista Ultimate x86. Whenever I shutdown my lappy via the start menu or press the power to do so, vista appears to be shutting down as the open windows close, but then my screen goes black and the power light, wlan, and bluetooth lights remain on. Those indicate the laptop is still running and to completely turn it off I have to hard-shut it by pressing and holding the power button.
I have a ASUS Lmaborghini VX2S for reference.

More replies
Answer Match 84.42%

I have an Asus Eee PC that I got last year for my birthday. It has Windows 7 as the operating system. When I turn to computer on it seems to be working normal. When it comes time to log into a user profile and I click on the administrator profile (which is the one I use) and type in the password. The computer logs onto the profile but the screen stays completely black. I can still hear the computer running but the screen doesn't change. This has happened before but the toolbar was always visible at the bottom of the screen and now it's not. The only thing I can do with the screen black is type in Ctrl Alt and Delete to get the menu. Nothing on the menu seems to be helping with the issue.
I decided that I better see if the same thing was happening with my guest profile too. When I logged into my guest profile everything is working fine and that's what I'm on right now. However, the administrator profile has all my documents that I need for school and work so factory resetting or the possibly of wiping the computer isn't really an option.
Thank you for your time.
 

A:Computer Screen Stays Black

Is explorer.exe running when you look at the processes?
If it is, end the process.
Next press Ctrl+Shift+Esc to bring up Task Manager, and then go to File \ New Task (Run) and type in explorer into the run box.
Does your desktop appear?
 

1 more replies
Answer Match 84.42%

So, my computer has had this as a recurring problem for about a year now. After suffering some form of trauma, (a small child running into, someone tripping over it, etc.) my computer screen will turn a solid color, usually gray or blue. After shutting it down the monitor turns black and attempting to boot up the computer causes the monitor to stay black, though the fans in the case turn on and machine makes various clicks and whirs.

Every time this has happened in the past I have gone into the case, disconnected all outside cables, the video card, the battery on the motherboard, and occasionally other things as well, sort of haphazardly. I let the thing sit for a while and then plugged everything back in and after maybe one or two iterations of this process the thing eventually booted up.

After it's most recent trauma (having a laptop dropped on it =_=; ) it hasn't booted up properly after several unplug-and-replug-everything routines. The fans still start up, like before, but I haven't been able to get video to work. I have tried disconnecting the video card and plugging the monitor into the built in graphics on the motherboard but that still didn't work. While "on" I tried pressing various "locks" on the keyboard and found that numlock caused a light to light up, but neither caps nor scroll lock did ( I don't know if this means anything, but I figured I'd throw it out there ). No sounds are emitted by the speakers, but ... Read more

A:Screen stays black at all times

Yes replace the old power supply and back up everything important to you. Get those old hard drives replaced ASAP. They are slowing your system down at the very least
 

7 more replies
Answer Match 84.42%

OK. So my laptop doesn't start. It just blinks 3 times (1 long and 2 short). The whole laptop is shut down and doesn't start.message edited by blacklakk

A:screen stays black and i don't hear anything

"It just blinks 3 times (1 long and 2 short)"You'll need to post more information than that if you want advice on what to do.What blinks? The screen? One of the lights?Do you mean it blinks or it makes beep noises?Make & model?

4 more replies
Answer Match 84.42%

Hey,

Iv just installed a new CPU into my vista PC and now my screen says black. The PC sounds as if it is loading up like usual but my PC screen stays off as if my PC was off.

I even turned my screen off and on again but said it wasnt reciving a signal.

What should I do?

Thanks,
James.
 

A:Iv just installed a new CPU but my PC screen stays black

16 more replies
Answer Match 83.58%

Heres the story... customer got bad viruses.. did clean up and removal of the infections and I noticed the laptop wasn't shutting down. (I cant confirm that this wasn't an issue before. I didn't notice it but doesn't mean it wasn't there) when you go to shut down the screen goes off but power on light stays on and fan stays on. Have to hold power button to shut it off

HP Model Pavilion 2000-2b29WM

Heres what I have done so far...

1. I did the refresh (the full format one) but still did it. I still have windows 8 didn't bother updating to 8.1 yet since that's what I had before I refreshed it
2. updated/flashed BIOS but didn't work. Reset BIOS to default
3. Turned off "Turn on fast startup (recommended)"
4. put in different HDD and loaded Windows 7 and when I went to shutdown it locks up at shutdown so still problem shutting down but screen stays on.
5. tried different RAM
6.Tried different power adapter.
7. tried holding SHIFT while shutting down
8. Resisted punching the laptop.

I don't know what else. I was confident that the viruses did it but maybe its a coincidence and its some hardware issue?? Thanks

A:shutdown black screen power stays on

Set the BIOS to default settings.

13 more replies
Answer Match 83.58%

i can see the screen being illuminated but i cant see anything, i hear windows starting up and everything... what could it be?
 

A:Screen turns on but stays completely black

If it's a laptop then the LCD lamp could be working but there's something else wrong with the LCD.

Can you see the bios screens and info right before the Windows starts?
 

3 more replies
Answer Match 83.58%

Hello
My HP Pavillion dv5-1045tx won't boot up properly. Everything starts up and runs as it should, it comes up with the hp loading screen, then asks if i want to start windows in safe mode or normally, then it comes up with a loading screen with microsoft corporation written on it, the backlight turns on and off, the cursor flashes on the screen the dissapears, and from there i'm stuck on a lit up black screen. I've let the computer run on this for nearly an hour and nothing happened, so i've come here.

The last time i used it i didn't shut it down properly, i accidentally disconnected it from the power source when i got up, as the battery was deadflat so it just shut itself off instatnly.
As far as i know, that is what has caused the problem, but i don't know a solution.
Is there a quickfix for this or do i have to take it to a store and get it repaired in someway?
NOTE: It started up properly in safemode, but thats as good as it gets.

Thanks in advance.
 

A:HP laptop boots then stays on a black screen

NOTE: It started up properly in safemode, but thats as good as it gets.
Click to expand...

so from safemode try a restore to a date when it was working

start>programs>accessories>system tools>system restore

choose the date before this started
 

1 more replies
Answer Match 83.58%

My computer was running fine and then suddenly the screen went black.  I turned the power off and on and it came up with error message "Unmountable Boot Volume" and then tried to fix the problem but it just stayed on the black screen and never fixed the problem.  I turned it off, done the hard reset where I take out the battery and hold the power button for fifteen seconds but it is still the same. I have gone into the mode where I can try to restore the computer but it does not allow me to do that. It say's it is restoring and then just stays black.   I have also ran a report where it says the problem is "Hard drive Short DST Check: Failed" and gave me a code of 0SNHWW-7N987K-MFPWMG-60WF03. If there is anything that can be done to help me I would really appreciate it as I use this laptop for work and really need to get it back up and running urgently with minimal cost.  Many thanks for your help

More replies
Answer Match 83.58%

Got the computer from a family member, I tried fixing it for them first and I thought it was the video card so I tried a different one and still nothing. So it was unplugged and stored for months then they just gave it to me. Well I took it home and started messing with it turned it on a cple of times nothing. Moved wires around put different psu in nothing, put it back to normal it started right up powered screen up I got into windows but it had a lot of lag so I went to restart it so I could do a fresh install and screen shut off... note when it wasn't working before this point the cpu fan ran at full rpm when turned on but slowed down when it worked this first time. I turned it on and off cple times nothing unplugged psuand back in it worked enough to reinstall windows and went to restart nothing. When plugged my speakers in to see if it beeps it started up! Its toying with me, restarted it again nothing so next try I pushed on the cpu thinking the mobo was bad it started up and woked for a cple restarts and quit... I tightened. The mobo screws down to the case and worked for awhile and then started acting up on restart. It will turn on once after it sits awhile unplugged with the bios battery out. I'm confused... bad bios or the mobo? I have unplugged all things that aren't needed for start up different hd with same effect. Only thing I haven't tried yet is the ram. I'm at work and will mess with it more later. Its a compaq presario or w.e amd 3800+ 2.4 ght proc two 512m... Read more

A:computer turns on but screen stays black

The PSU was probably bad, replacing it should have fixed it. There may be bad caps on the motherboard or something is grounding on the MOBO to the case and causing it to not boot. Take everything apart. Take Heat Sync off of processor and apply Thermal Paste. Take MOBO out of case and check to see if there are any burn marks, bad caps, or if there are any risers missing off the case keeping the MOBO from touching the case.

8 more replies
Answer Match 83.58%

My laptop has been doing this for a while, whenever I go to shut down my laptop from start menu the screen goes black but the fans stay on and the keyboard lights still glow (I have an Alienware with the glowing keyboard). Only when I hold down the manual switch does it shut down all the way.

This presents a bigger problem recently because when I install updates and then restart my computer, I must shut it down manually and on startup I must open in safe mode and then restore my computer to a point before I installed windows updates. (I am not completely sure that the fact I have to turn off the computer manually is the reason that my computer is telling me to restore to a point before I install updates, just to be clear.)

Thanks for the help.

A:Upon shutdown, only laptop screen goes black but stays on

Is this the original factory preinstall which most tech enthusiasts won't run, preferring to Clean Reinstall - Factory OEM Windows 7 to enjoy native Win7 performance?

Stick with the tools and methods given and you'll get and keep a perfect install.

In your case I'd first Run Built-In Diagnostics for Your Dell Computer | Dell US from it's partition to see if it will boot and run, give you a report on your hardware. If so then during the booted reinstall you'd want to leave the OEM Diagnostics partition but delete all others using the Drive Options in Steps 7 and 8 of Clean Install Windows 7 to create and Format New.

Otherwise work through the Troubleshooting Steps for Windows 7 starting with a Clean Boot, checking logs for repeat errors to resolve, utilitze System Resources to find solutions and Generate a System Health Report.

5 more replies
Answer Match 83.58%

I have a Gateway NE71B laptop, had for about 2 years. One day the laptop screen wouldn't turn on, but it would connect to the tv VIA HDMI. Just the other day the laptop couldn't connect to the tv via HDMI anymore. I tried taking the battery out and restarting it, but it still wouldn work. I have a serious problem and I need help! (WINDOWS 8)
 

More replies
Answer Match 83.58%

Hello anyone who can help!

I have a Lenovo Laptop Thinkpad Edge E520 8GB RAM, Intel CPU B960 Pentium Processor 2.2GHZ

Recently when I have powered up my laptop it occasionally doesn't load properly, the screen stays black. You can hear the laptop working fine but you cannot see anything.

This happens once or twice a week, I usually hold on the power button for 5 seconds, then reboot and it resumes my hibernate settings as usual

Could this be because I always hibernate my laptop?

Can someone please explain what might be causing this problem and how I go about fixing it?

Thanks in advance!
 

A:Laptop powers on but screen stays black?

Thats a fairly new laptop as i have the edge 530.ive never put any of my computers on hibernate so im not sure if that why its doing that. it sounds like either a power supply problem, a screen problem, or a harddrive problem.or rarely the motherboard.you might want to take it somewhere and have it checked out then you will know for sure and go from there.if you have an external monitor you can try and see if anything shows up on it. if so or even if the other monitor is black i would still start with the screen first as the problem.
 

2 more replies
Answer Match 83.58%

Hi guys

Has anyone got any suggestions to a laptop which boots normal with LEDs on and fan and hard drive starting up but the screen remains black with no light at all...

I am told that it could be the onboard graphics which is gone meaning the motherboard needs replacing.
Can anyone confirm that at all?
Unfortunately it is an out of warranty laptop.

Many thanks

this is an Acer Aspire lpatop with Win XP Pro
 

A:Laptop boots but screen stays black

Shine a strong light on the screen when the computer completes its boot up. If you can faintly see the desktop and icons. You may have a bad backlight lamp in the LCD panel or a bad DC-AC inverter that drives the lamp. Both can be replaced. Replacing the lamp inside the LCD panel can be a delicate operation if you attempt it yourself. The DC-AC inverter board is a separate assembly that can be readily replaced.
 

2 more replies
Answer Match 83.58%

I have a windows vista basic. Since I got a new video card installed, when I turn my PC on, it takes much longer to boot up and my monitor screen stays black much longer - waaay long. No problem after that, but am wondering why 'black so long'?

Any ideas?
 

A:When booting up screen stays black too long.

15 more replies
Answer Match 83.58%

Hello, I am working on a toshiba labtop

When I press the power button, the power light comes on, led indicator light comes on for power and battery charging comes on. The cd rom fires up, the cpu fan fires up. The screen stays black, The hard-drive led indicator stays off and the hard drive does not spin up. I have tried to reseat the memory and reseat the hard-drive. I have pulled the battery and held the power button without the the ac adapter hooked up for 60 secs, still nothing, hooked up to external monitor and still nothing. Any tips to try to figure this out?
 

A:Labtop not coming on screen stays black

First of all, its a LAPtop, not a LABtop, and secondly, I believe the problem could be the motherboard, although Im not sure because many things can cause something like this. Try some different memory in it, that would be the easiest option and if that doesnt work, it is most likely the video card. And the video card is very difficult to replace on laptops.
 

1 more replies
Answer Match 83.58%

After hard reset the computer will not boot up just has black screen

More replies
Answer Match 83.58%

I have an Acer Aspire 1692 laptop and lately the screen doesn't work anymore. The computer starts up, all the lights are lit correctly, but the screen just won't show anything. Up to now I have already succesfully restarted it with the screen working, the only trouble is that I don't have a clue how I did it . In any case, now I can't seem to get it to work anymore.

I have read other forum posts about this subject, and there are some possibilities I have already ruled out.

The backlight is not broken, I think. I can't see anything when I shine a flashlight right into the screen, and besides, if it was broken I couldn't have got it to work two times, right?

When I hook up an external monitor, the screen is a bit botched (lines, a bit different coloring, stuff like that) and the computer automatically restarts when I log into Windows. That is definately not normal. Also, my button to switch to an external monitor is Fn + F5, but pressing it doesn't do anything. The laptop screen stays black and the external monitor stays botched.

The two times I got it to work, I was switching the external monitor between my desktop (where I was browsing the internet for a solution) and my laptop, and suddenly it worked. The second time I followed an instruction on Acer's support page (this one), and it worked again - So I thought I had it fixed, but the next time I started up the laptop, I had the same problem and so far it hasn't worked anymor... Read more

A:Acer laptop: screen stays black

So, I take it no one has an idea?
 

3 more replies
Answer Match 83.58%

For no apparent reason, there is a little black box on my screen with a white open, compacted arrow in it and inside the arrow an 'A' (see screenshot). The screenshot shows Mediaplayer open but it is there constantly, independent of which program I am using. It seems 'dead': clicking on it (either right or left) results in nothing. How can I remove it? Now that I have made the screenshot, suddenly there is an arrow through it.
Thanks for advice! IJmir

A:Unknown little black box with arrow and 'A' in it stays on the screen

since when is this house appearing?

9 more replies
Answer Match 83.58%

Hi,  Since last week I have some problems with my new HP laptop (5 weeks old). Every time I leave my laptop and it switches to sleep mode (or wathever mode its called), the screen stays black. I get responses from my keyboard lighting etc. But the screen stays black. I have to shut down my laptop by holding down the power button, when it restarts, it works again.I also have to mention that my computer froze more than often the las couple of days, with only the internet on and my fan is making a lot of noice, with no heavy programms running.  Does somebody has any idea what the problem could be? Thank you in advance! Kind regards, Maarten

More replies
Answer Match 83.58%

Hey

When I go to turn my computer on it can't get to the windows loading screen it just stops on a blank black screen. I have/will upload a video of it happening to illustrate what is happening since I might not have described it well.

I can't post videos due to my post count but if you want to see it just PM me.

The last thing I remember my computer doing before it turned off was a virus scan then a few minutes later a blue screen with some white writing coming up so I rebooted and this happened. I have tried using my Windows CD to repair it but it hasn't worked. I can't get into safe-mode because it just stops on the black screen with white writing (Sorry for all these un-techincal names xD).

I was wondering if anyone knew what was happening? Ideally i'm looking for a fix for this so I can back-up some of my files onto an external harddrive then I want to reformat.

Thanks, Ash
 

More replies
Answer Match 83.58%

Here is what I have:A Samsung 40g hard drive as master, a Seagate 40g as a slave. A Sound blaster Live CT4760 model sound card, A d-link wireless wda 1320 AN asus AS99127F P4T-E motherboard, 4 256mb Samsung RAM sticks and An ATI radeon 8500 LE 64 m DDR graphic card.Ribbon cables.

My problem: when I turn on the PC, a few things happen. It asks then if I want to boot from safe mode, safe mode with networking, safe mode with command prompt, to try to restore to last known settings or to start windows normally.
I already chose all these options. When I do any of these things, the screen shows a white bar. It fills up to the end and Then nothing after that. When I chose the continue normally prompt, I took a 20-minute shower and returned. Still nothing. At that point I think that it should have advanced into another screen or something.

I am not sure what is on the master drive as it was given to me but i know that it worked at one point.
I would be open to any suggestions that don't involve paying extra money. I know that there is some way to make it work-with some help from smart people.
Also: i have two extra hard drives one is a 60g WD hd and one is a 40g WD.
-Thank you for reading, Bamabeast
 

A:I need help, my PC stays at black screen with white line

7 more replies
Answer Match 82.74%

Toshiba Satellite A500-132, Windows 7 So 2 days ago while my laptop was turned on i closed the lid, packed it and took it with me. 1 hour later had to use it so i opened the lid tried to power on. It did but screen was black and i could hear no sound of functionality. Searched the web for a solution and i powered laptop off, removed power cord,battery,rams and hdd. Then kept pressing the ON button for greater than 30 seconds. Reconnected everything and laptop booted windows normally. Last night it happened again and this time the same procedure doesn't seem to fix the situation. This whole things looks very bizzare, never heard of anything similar, i hope you can help! Also, could a cmos rtc battery problem cause such a problem?

More replies
Answer Match 82.74%

Hi,
Got my Laptop for a year now and starting to have a strange problem since
I installed Vista.
I have installed all the drivers from the asus page an some newer ones from realtek and other ones. Everything on the last version.

Now my problem:
When I close the lid the screen turns black as it should but then doesnt turn on when opening it again. It stays black.
Got linux on a different partition where it works perfectly so I think its not a hardware problem like I first thought. I first tried everything in the energy options under vista to figure out if anything changes but you can only choose what the screens should do when closing the lid not when opening it ;)
I have no clue what I could do right now. Probably its a software failure that can only be fixed with a fresh Vista install, but thats the last thing I want to do.
If you need the specs of the laptop just tell me. My graphics is a GeForce Go 7600

I appreciate every suggestion or clue =)

Thanks in advance

A:Asus F3jm screen stays black when reopening the lid

Hi,

I would first try updating the graphics drivers to see if that fixes the issue.
http://dlsvr02.asus.com/pub/ASUS/nb/...a32_070313.zip

Moving you to Vista support.

4 more replies
Answer Match 82.74%

When turning on the computer, it mostly has just a blank grey/black screen. The screen image does flash intermittently (although not in any consistent way) and show itself, but does not stay visible to allow using the laptop without a secondary screen connected. With a secondary screen, the computer operates fine, so if you can see what it is doing on another device, the data can be used. It defeats the purpose of laptop though and makes it inconvenient to have to pull the screen from another computer.

More replies
Answer Match 82.74%

Our C720 is just over a year old, when we open the lid th escreen stays black, there appears no noise from the fan either.  There is a blue light on the front and another blue light if we put the charger in. Tried the reset by pressing the power button down but nothing still. This appears to be a problem with Chromebooks? Can anyone help?

A:C720 screen stays black, blue light on but no fan

The blue light is saying the battery is fully charged, so we know at least that portion of the hardware is working. Have you tried the 'press the power button for 30 seconds' thing? This should do a forced power down, just in case it's actually sleeping after biting into Snow White's apple.  If that doesn't help you might have a hardware issue with the power button itself. We can test that by trying to boot into developer mode (the same place you would use to reset the OS). Press and hold the ESC key and the Refresh key then while holding them press the power button. If that shows you something on the screen let us know and we'll look at what else to do. You might also be looking at a hardware issue with the screen. If the screen isn't working you could still boot, just with a black screen. If that's the case you should have the blue light go to amber after a bit as the battery starts to discharge. If the light stays blue with the power disconnected then the system itself isn't starting...

9 more replies
Answer Match 82.74%

I have Windows 7 on my laptop and after I start it up and enter my password to login to windows I have to wait another 10-15 minutes for my desktop to appear. It's just a black screen, but the kicker is that I can move my mouse and see it on screen. I've never heard of or seen anything like this before.

Anyone know what's causing this or how to fix it?

A:Laptop stays at Black screen for 10+ mins after logging in

How old is the laptop? Is it still under warranty? What you are describing sounds like the LCD is going bad.

1 more replies
Answer Match 82.74%

Our C720 is just over a year old, when we open the lid th escreen stays black, there appears no noise from the fan either.  There is a blue light on the front and another blue light if we put the charger in. Tried the reset by pressing the power button down but nothing still. This appears to be a problem with Chromebooks? Can anyone help?

A:C720 screen stays black, blue light on but no fan

The blue light is saying the battery is fully charged, so we know at least that portion of the hardware is working. Have you tried the 'press the power button for 30 seconds' thing? This should do a forced power down, just in case it's actually sleeping after biting into Snow White's apple.  If that doesn't help you might have a hardware issue with the power button itself. We can test that by trying to boot into developer mode (the same place you would use to reset the OS). Press and hold the ESC key and the Refresh key then while holding them press the power button. If that shows you something on the screen let us know and we'll look at what else to do. You might also be looking at a hardware issue with the screen. If the screen isn't working you could still boot, just with a black screen. If that's the case you should have the blue light go to amber after a bit as the battery starts to discharge. If the light stays blue with the power disconnected then the system itself isn't starting...

9 more replies
Answer Match 82.74%

Basically I go to switch the tablet on and the power button lights up but that's it the screen doesn't even light up nothing and occassionally a light flashes from the top on the screen in the middle but that's it I've tried resetting it everything please help I bought it for uni and I start in a few days

More replies
Answer Match 82.74%

Seems like ever since the latest NVIDIA graphics drivers update (I'm not 100% sure about this, but I think it's the case), my screen stays black upon being woken up from sleep or hibernation. I know it's on, and it's not a matter of the computer being slow, because it's not, and even if it were, leaving it on for many minutes and it remains blank, and the power button and keyboard and everything light up and it starts heating up, so I know it's doing something. Hitting FN-F2 for the backlight does nothing, so I don't think that's the issue. The only way to resolve it is to hold down the power button and reboot, which **bleep**ing pisses me off because sometimes I have important work up and am forced to lose it. Anyone else seeing this issue? Could it be related to the new graphics drivers, or is this something worse and hardware related? My screen seems A-OK when it comes to everything else. Thank you!

More replies
Answer Match 82.74%

My dad has an E-machines desktop with Windows XP SP2... he mentioned he'd updated it with service pack 3. This morning I installed a game, but it said files were corrupted and to re-install. It wouldn't uninstall, so I rebooted.
It brought up the black screen with 5 options -- Safe Mode, Safe Mode w/ Networking, etc.

"Safe Mode" starts, but stops at windows/system32/drivers/agpCPQ.sys and freezes forever.

Last Good Configuration Settings/Start Windows normally leads back to the black screen.
... with a quick flash of what appears to be the blue screen of death?
I saw on a few posts, it may be a BIOS problem? I'm unable to download anything straight to the computer, obviously, and it was suggested the hard-drive may be "kaput."
Thanks in advance for,
Jordan

A:Black Screen Stays/safe Mode Not Loading

Try running chkdsk from the Recovery Console. Insert the Windows XP CD into the CD drive, and then restart the computer. Click to select any options that are required to start the computer from the CD drive if you are prompted. When the "Welcome to Setup" screen appears, press R to start the Recovery Console. If you have a dual-boot or multiple-boot computer, select the installation that you must access from the Recovery Console. When you are prompted, type the Administrator password. If the administrator password is blank, just press ENTER.Type: chkdsk /rIt's important to have a space before the "/".To exit the Recovery Console and restart the computer, type exit at the command prompt, and then press ENTER.

4 more replies
Answer Match 82.74%

Hello,

I am having quite a problem with my computer:
After a while of idling, or in the middle of a game, the screen will go black, but the light stays green, indicating there still is a signal.. i think. This is on my 21' CRT. So i tried another monitor, an LCD , while this is happening, and i get the message 'Mode not supported'. I tried installing an older nvidia driver thinking that could be the problem, but it didn't fix it. When this happens i see the video card fan is still going, and I'm really not sure what is wrong.
If you could help me out that would be most excellent, the computer i am on now has Intel Extreme Graphics 2 onboard video, and it is painful to play any decent game on it.

Thanks in advance!

Edit : I also remembered sometimes(rarely) when i shut the computer it wont react when i try to turn it back on with the power button, but a few mins later as if by magic it turns on.
 

A:Screen going black - Light on Monitor stays Green

16 more replies
Answer Match 82.74%

Today when I turned on my
computer and monitor. My computer turned on but my monitor screen was black. The light on my monitor did did not turn blue it stayed on amber. I open up my computer and cleaned some of the fuse of my graphics card still no luck. Please help

A:My monitor screen stays black after I turn on my computer

Hi, does your motherboard have onboard graphics? if so try removing the nvidia card and hook monitor to onboard graphics does it recieve a signal?

9 more replies
Answer Match 82.74%

Hi Guys,

Im having some problem with my Packard Bell EasyNote TJ61 - I powered it on and the fans whirred like normal and the lights on the keyboard came on like normal - the power button lit up. But the screen stayed black. Then the fans went silent after 5 seconds and it sounded like it was switched off but all the lights were still on - the power, hard drive and keyboard ones. I noticed if I run my finger over the touch pad buttons for volume etc they light up so im not sure whats wrong.

I replaced the screen on the laptop the other day and it was working fine until last night and this has happened. Any suggestions?

I've tried replacing ram / replacing hard drive / pulling the cmos battery for 30mins / unplugging and trying the 30 seconds power button trick but nothing.

Any suggestions?
 

A:Laptop Power On - Screen Stays Black - Fan Goes Off 5 Seconds

If you have a PC monitor connect it to the laptop and see if you get a display on it.

Also check the laptop screen for a dim image, shining a light onto it may make it more visible.

What was wrong that made you replace the screen ?
 

3 more replies
Answer Match 82.74%

I have tried EVERYTHING from the website, but whenever I push the power button the screen stays black, the power light is on and the f12 key stays red. I have hard reset, bought replacement AC cord, replaced CMOS battery and no help.

More replies
Answer Match 82.74%

Hey i'm new here and i've had A computer for like 2 years and it used to work but once I left it alone for a month I went to turn it on and it didnt work.... the monitor just stayed black....i checked every cord and there all in and I think it has something to do with the motherboard(i barely know anything about computers at all).. the mother board is a KM4M-V/KM4AM-V/KM3M-V series micro ATX mainboard and thats all I could think of putting in but I have every bit of info on it so if u need more info on the machine I can tell u it. Any suggestions PLEASE HELP! Just remember I dont know a lot but I do know more than an average chuck
 

A:My monitor screen stays black when I turn my computer on

is it onboard video? or do u have a video card, perhaps try pulling everything out of the system and cleaning it, it might be dirty inside since u havent used it in awhile
 

13 more replies
Answer Match 82.74%

On my pentium 4 PC running windows XP Home, very occassionally on boot up, the monitor remains black. If I restart the computer using re-set or by holding the on/off button and then shutting down and then re starting, it boots up fine and the monitor displays clearly. This happens about once every few weeks. Is it nothing or an indication of a problem somewhere. Otherwise the system runs fast and trouble free and is watched over by Norton anti virus, Spywareblaster, Ad-Aware and Spybot. I run disc cleanup and defrag regularly. I am a little suspicious of the video card, but really not sure at all.
Thanks,
G
 

A:occassionally monitor screen stays black on boot up.

Well a first step might be to power down and reseat the vid card and your monitor connection, could be a bit of corrosion.
 

2 more replies
Answer Match 82.74%

This is an issue that just started. After starting my computer, typing in my password and logging in, my computer simply goes to a black screen, even though the back light is still on. I can still move the mouse and can get the task manager to show up, but nothing else. I am running Windows 7 ultimate, and have never had an issue before
 

A:Asus G50V: Screen stays black after login

Try performing a system restore
 

1 more replies
Answer Match 82.74%

Hi all, My laptop model no is HP Pavillion. My OS is Windows 8 64 bit. So today I shut my laptop down forcibly pressing the power button as it was not responding for that time. So the next time I switched it on this erroneous problem started. Everytime I switched it on the HP logo comes and then the Windows logo also comes. But then the screen stays black and only the mouse cursor is seen. So what can be the cause of this problem?  Note- I already tried the discharging method after taking off the battery and holding down the power button. It could not help. All LED's are working fine. I have no extra monitor, so I cannot check the display elsewhere. 

A:Laptop screen stays black with mouse cursor only after HP an...

Hi, Try the following. Shutdown the notebook and leave it like this for 10 seconds. Tap away at f11 as soon as you press the power button until you see a 'Windows is loading' message. On the next screen, select your Keyboard Layout and on the following screen, select Troubleshoot. Select 'Advanced Options' and then select System Restore. Click on your Operating System and then wait until the System Restore window opens. Pick a restore point at least 24 hours before the issue first occurred and then proceed with the system restore. Regards, DP-K

2 more replies
Answer Match 81.9%

My laptop screen is red, except for web pages, which sometimes have some red on them. I can use an external monitor which works normally

More replies
Answer Match 81.9%

Context of the problem
Laptop model: L322XBIOS version: A08
I seem to be having virtually the exact same issue as this one.  
http://en.community.dell.com/support-forums/laptop/f/3518/t/19522061.aspx
Except I am on A08.  
Basically the laptop will not boot, I cannot even get into the bios because it never boots to the dell logo.  It started happening maybe a week ago, but after a few trials normally it would work again and boot into windows.  At this point though it will not boot at all.
I have tried his solution at the bottom of the page, but after 30 plus trials it still will not update the firmware to A09.
I am currently completely unable to boot to the dell logo, or windows, every time it tries to start it hangs with the keyboard lit up, and the screen fully black.  I can boot to the dos bios update utility as he explains in his post, but again it will not update the firmware ever.  Any idea what I should do?
Is there anyway I can force it to boot into the bios so I can try to change some settings?  I looked but could not find any jumpers in the documentation for resetting the bios.  

Any help would be greatly appreciated.  Thanks.

A:L322X Will not boot, keyboard lights up but screen stays black.

Hi quade.broadwell,I recommend you to remove the battery and disconnect the adapter, press and hold the power button for few seconds and release to drain the flea power .Now put back the battery and connect the adapter and power on the computer.
Also, refer the following link for more troubleshooting:http://dell.to/10KNPJ0Awaiting your response!

4 more replies
Answer Match 81.9%

My smart touch desktop starts up but the screen stays black as if it's still off. I can hear it runNing but nothing turns the screen on.  It worked fine yesterday I have even left it unplugged for hours but nothing is turning my screen on.   Please everything is on there!!!!

A:My smart touch desktop starts up but the screen stays black ...

Hi there @JeniS,Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts, and other support personnel. I understand you are having an issue with the black at startup. I will be glad to help you. Please post the full product number of your computer. See the following, if you need help with that information.How Do I Find My Model Number or Product Number? Please get back to me and I will do all I can to help.

1 more replies
Answer Match 81.9%

I am attempting to remove a virus from a friend's toshiba a505-s69803 laptop.. in the transportation process i spilt a bit of water on the laptop but i do not think it effected the computer, because i was able to use the computer for days afterwards.. while trying to remove the virus in safe mode the computer would not let me run any anti-malware programs, and then subsequently shut down... now, when i try to start up the computer the keyboard lights turn on and the disc drives and fans begin working, but the screen remains blank... there are no signal beeps to indicate a hardware malfunction, and the three of the five lights on the front of the laptop (3 on the left side) are on... ive tried all the troubleshooting techniques on the forums, i.e. removing the battery and running on ac power, and vice versa, holding down the power button for 30 sec, 45 sec, 1 min, and 2 mins, all to no avail.. another computer savvy friend of mine said that some of these new viruses are smart enough to write itself to the bios which would prevent the computer from starting up... he recommended flashing the bios, but i do not know how to do so on a black screen, or if it might have been the water damage that may be causing a hardware problem (im thinking motherboad or video card if so)... any ideas would be greatly appreciated..
 

A:Laptop will start up but screen stays black, not a computer amateur but need help!

These new viruses are truly evil... and wide spread. We have had over 30 cases since Wednesday... all doing what you describe.

But the Toshiba is also infamous for having the screen inverter go bad... cheap to replace but darn difficult to get at quickly.

Can you connect an external monitor to the VGA port on the back of the Toshiba to see what you get there?
 

3 more replies
Answer Match 81.9%

My computer has been crashing a lot, which i think is a hardware issue, that is not for this post, but i right now, need assistance, after using my pc in the morning, turning it off, then when i come back, i turn it on, shows the logo, then a dark screen, forever, atleast how long i have waited. I have tried resetting bios, moving ram sticks, messing with BIOS, running hardware checks and software, startup repair says that the laptop boots up, and find no problems, but it doesnt let me do a windows memory diagnostic, i may provide extra information if needed, and i do not know if any more is required, and please do help me, i cannot do anything on my pc until it is fixed 

A:Lenovo thinkpad Edge E540, stays in a black screen...

Also, when its in that state, all of the computer is on, too is the display, the laptop isnt just giving it anything to display, its just black. 

2 more replies
Answer Match 81.9%

My Dell inspiron 6000 laptop stopped working. It shut off while I was online and when I try to restart it, it goes to the start up screen (black, says dell in blue letters) then the whole screen goes black and stays that way. I left for an hour and came back and the screen was still black. I have held the power button down until it restarts and that didn't work, I have pressed ctrl+alt+del and that didn't do anything either. I have also run a diagnostics test and everything passed. I have run out of things to try. Can anyone help me?
 

More replies
Answer Match 81.06%

So i just bought a new Gigabyte GTX 770, had a 650 before and everything worked. I have the Gigabyte GA-970a-ud3 mainboard with 2 PCI-E Slots, both 16x but one runs with 4x. If i put the graphics card in the top slot (16x) LEDs light up and fans start running , i hear the windows 7 welcome screen sound through the speakers but the screen stays black, but if i put the card in the bottom slot (4x) everything works, besides the fact that the graphics card is slow as hell.
Both PCI power cables plugged into it, i tried removing all drivers, resetting cmos.
I dont know what could possibly be wrong but maybe you do, so thanks in advance
 

More replies
Answer Match 81.06%

Exactly like the title says. I became infected with the System Tools virus and it would not allow me to run any programs to try and fix it. I restarted my computer and tried to run it in safe mode. After it exits the initial screen where you can ctrl s to enter config it loads into a black screen no matter what I try. I try to hold F8 but it still continues to go into the black screen. I have read else where to run the XP disk and go from there, but this is my fiance's computer and she said it did not come with the XP disk as it was preloaded on when she bought it about 4 years ago.

If I could figure out how to get safe mode to run, I could probably figure out how to remove it from there, but like I said I'm stuck at a black screen now no matter what I do. Any help would be appreciated. Thanks.

A:Infected with System Tool virus now XP will not start at all. Stays at a black screen.

Hi, when starting the computer and tapping F8, do you still see the Advanced boot options menu where you can safe mode, or does that not come up? If you see that, and choose normal mode, do you still see the XP splash screen or does it go black immediately?

1 more replies
Answer Match 81.06%

Okay now i have no idea what the model is for my mother board, and no idea what type of AGP slot it has, but it is empty because atm i have an onboard NVIDIA GeForce 4 MX INtegrated GPU. my computer atm is an AMD Athlon XP 2600+, 512 MB PC2700 333 cl2.5 DDR (its also a crapy HP Pavilion if that helps). I bought the computer back in september 2003 and it was refurbished if that helps in determining what type of AGP slot it is.

here is the video card i bought:http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=1043623&sku=C460-8006
(ya i know, noot good or anything, but i dont need some super good video card with my computer) i only wanted to get a new one because when i bought new ram (2x512, PC3200 400 cl2.5 DDR ram) it didnt work in my computer when ever i ran a game like cs, it would always shut down or restart my computer.

I know i need to disable my previous driver for my onboard video card, but i did that and installed the video card and checked to see if it worked by plugging in my monitor, mouse and keyboard and turning it on, and nothing came up on my monitor.

The help would be greatly appreciated, because i also want to run another game on my computer (like HL2 or CS:S because CS 1.6 just aint enough )

And if you are able to determine somehow what type of AGP slot it is, would the AGP 8x i bought work on it? or would it have voltage issues that are causing it to not work.

thanks
 

A:Need help with installing my new video card, screen stays black when i turn on comp

I just downloaded EVEREST and it tells me what my hardware is like, so it tells me what the name is of my motherboard (this should help) and everything with itField
Value
Motherboard Properties
Motherboard ID Exp$103.011$06/27/2003-17:27:59$nFORCE
Motherboard Name Asus A7N8X-LA

Front Side Bus Properties
Bus Type DEC Alpha EV6
Bus Width 64-bit
Real Clock 133 MHz (DDR)
Effective Clock 267 MHz
Bandwidth 2133 MB/s

Memory Bus Properties
Bus Type Dual DDR SDRAM
Bus Width 128-bit
Real Clock 167 MHz (DDR)
Effective Clock 333 MHz
Bandwidth 5333 MB/s

Chipset Bus Properties
Bus Type HyperTransport v1.0
Bus Width 8-bit

Motherboard Physical Info
CPU Sockets/Slots 1 Socket 462
Expansion Slots 3 PCI, 1 AGP
RAM Slots 2 DDR DIMM
Integrated Devices Audio, Video, LAN, IEEE-1394
Form Factor Micro ATX
Motherboard Size 240 mm x 240 mm
Motherboard Chipset nForce2-IGP
Extra Features CPU Overheating Protection

I hope this helps

i also just found this.

Field Value
Device Properties
Device Description nVIDIA nForce2 Integrated GeForce4 MX Video Adapter
Bus Type AGP 4x
Bus / Device / Function 2 / 0 / 0
Device ID 10DE-01F0
Subsystem ID 1043-80C0
Device Class 0300 (VGA Display Controller)
Revision A3
Fast Back-to-Back Transactions Supported, Disabled

Device Features
66 MHz Operation Supported
Bus Mastering Enabled

AGP Properties
AGP Version 2.00
AGP Status Enabled
Supported AGP Speeds 1x, 2x, 4x
Current AGP Speed 4x
Fast-Wr... Read more

9 more replies
Answer Match 80.64%

Hello.

Just today, I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : \windows\system32\config\system."

You can attempt to repair this file by putting the winxp cd in etc...

Now when i turn on my computer there is just a black screen showing, with nothing at all on it.

Any ideas anyone?

Thanks very much for your help.
 

A:Blue screen of death, boot problems, black screen startup

It's a nasty error that requires some persistance and resourcefullness to overcome without a clean install.

If you have a Windows CD or have the recovery console installed, you might want to have a go at these directions.

http://support.microsoft.com/default.aspx?scid=kb;EN-US;307545

Forum example of a successful recovery here:

http://forums.techguy.org/showthread.php?s=&threadid=195985
 

3 more replies
Answer Match 80.64%

Hi, thanks for checking my question. I haven't found an answer to my particular situation:

Dell xps m1430 laptop w/vista (32).

It all started with a blue screen w/scrolling text after the fated restart. The blue screen text said "if this is the first time you've seen this message..." and then comp restarted, again showing the blue screen, then restarted into windows repair mode, after repair mode tried to fix the problem comp restarted, then the screen went black / blank right after the little windows loading animation (where the bar keeps moving from left to right and there's a small windows logo).
It all happened fast, so there may have been steps I forgot, but that's the jist of it.

Now screen always goes black / blank during startup after the windows loading animation, so I can't start windows in normal mode.
I can start in safe mode if I manually force shutdown by holding the power button, so I'm not imploding with fear... ok I am.

Possible causes:
1. This occured right after installing 11 vista updates (that restart was when I saw the blue screen)

2. Also occured the restart after running a patch called "Vista TCP/IP and UAC AutoPatch 6.0" I downloaded it from softpedia, the developer was listed as defcon, and their website listed was securevista.net, but the site is down(I found this out after the problem occured). The patch had lots of positive reviews, and lots of people on other sites also suggest using it to re... Read more

A:Solved: Black screen of death at startup, all began with a blue screen

7 more replies
Answer Match 80.64%

Hi all,

Starting yesterday my computer would go through startup... while loading the desktop it would crash to blue screen with white text (unfortunately, I can't remember the exact error message). If restarted, it either goes to a blank black screen or back to blue, and I could only get the computer to operate in safe mode with networking. My antivirus software (avast free, malwarebytes)scanned and found no infections.

I have Windows 7, Samsung laptop.

Today, I was able to start the computer normally and am functioning with internet (still acting a little funny), but I am sure something is still not right. I also did a system restore last night, with the same problems (crashing, not starting up).

Any assistance would be highly appreciated!

Thanks in advance,

Brit

PS: I (goofily) started a similar topic in the "Windows 7" forum section without knowing this section was down here... Sorry! I tried to delete the topic/post but couldn't. Thanks.

A:Blue Screen with Error Messages, Blank Black Screen on startup

Hello,I will be helping you with your problems. Please be patient while I assist you.Some points for you to keep in mind while I am helping you to make things go easier and faster for both of us Please do NOT run, install or uninstall any programs, unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability. Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post. Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process. Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At the top of your post, click on the Watch Topic Butt... Read more

14 more replies
Answer Match 80.64%

I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says

"This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."

I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.

Help? I don't know what to do :[

A:Black screen on startup, showing cursor, doesn't go to log in screen.

  
Quote: Originally Posted by alexsmom2009


I'm using I have a DELL4500S desktop, on startup it will not go to the login screen, the screen is just black with the cursor showing. I've tried restarting the computer, unplugging everything and restarting it. Nothing is working. When it first starts a pop up shows and says

"This Application has failed to start because SAMLIB.dll was not found. Re-installing the application may fix the problem."

I'm not sure what it's talking about and what to re install and I can't reinstall whatever it is because I can't get to the start menu.

Help? I don't know what to do :[


SAMLIB.dll is a security account manager dynamic linked lib. A repair install from the dvd should fix the problem unless you are infected with malware, or have a modified system

3 more replies
Answer Match 80.64%

Before explaining how i got here, i will explain what exactly is happening. When I boot up my computer i see the logo then text saying Preparing Automatic Repair with a loading icon. Then i would get a black screen that would sometimes show a cursor that i can use with the black screen but most times just the black screen. Eventually this black screen ca give way to Diagnosing your PC loading screen that loops endlessly

Okay this started after I downloaded the anniversary edition for Windows 10, the first time i booted up the computer i had faced the AVG Watchdog initialization bug which prevented from accessing the laptop for the few weeks as tried looking for solutions forcing me to eventually uninstall AVG through Safe mode (the only way i managed to was through turning it off and on 3 times as every other way including holding F8 had not worked). After booting up the first time without issue after removing AVG and getting some things done, I turned it off without issue then i faced this new problem which is still plaguing me. I've looked up in forums for a solution but the closest i found was just reinstalling windows and losing everything, does anyone have a solution where i can still keep my data?

A:Can't access startup screen, boot up leads to black screen

Hi Helix935 and welcome to Tenforums.

If it was less than 10 days since this happened, you might have been able to go into Settings>Recovery and rollback from the Anniversary Update. But it's been too long now.

If it's data only that you're needing to save, you could boot the system to Kyhi's rescue media and use File Explorer to copy your data over to an external drive, then perform a clean install, (or reset or refresh from within safe mode).
Windows 10 Recovery Tools - Bootable Rescue Disk - Windows 10 Forums
You will need to reinstall your personal applications after the OS is working again though.

1 more replies
Answer Match 80.64%

Hi there,

I developed a problem with my desktop pc yesterday. I was gaming and the screen began to flicker then the game crashed - citing "rendering device lost". I tried to re-load this again and the same thing happened again, this time with a BSOD. I tried a different game and the same thing occured, took slightly longer though. Given it was late I went to bed.

Today on loading up the sign in screen was flickering lots, I entered my password and was met by a black screen. The computer continued to make fan noises as if it was working, but nothing on my screen. This happened again. On restaring my computer the crash report read

"Blue Screen.
6.1.7601.2.1.0.768.3
locale ID 2057
BCcode 1a
BCP1 0000000000005001
BCP2 FFFFF7009080000
BCP3 00000000000009ED
BCP4 B00000000

I've looked at the bug dump, but I was silly and did a system restore before this, so there's no bug dump.


The computer starts and runs fine in safe mode and without the graphics card in.

Since I've done a system restore
Cleaned everything again ( was pretty dust free to start)
Uninstalled and re-installed the graphics card drivers
Re-seated RAM and GPU
Done a memory diagnostic on my RAM
None of these have worked.
I've taken the graphics card out and it runs fine with the onboard GPU.

Some specs:
Intel I5 3570K
GPU - AMD Radeon HD 7870
Corsair Vengeance 8GB RAM
Motherboard: Asus P8Z77M pro
PSU -OCZ Core steam 500W

The pc has worked perfectly for 3... Read more

A:Flickering screen at startup - then black screen when I enter password

I found this on my notepad:

GFX 23:56:28.143 Heroes of the Storm (B43571)
GFX 23:56:28.143
GFX 23:56:28.143 Executable E:\Battle.net\Heroes of the Storm\Versions\Base43571\HeroesOfTheStorm_x64.exe
GFX 23:56:28.143 <Parameters> -sso=1 -launch -uid heroes
GFX 23:56:28.143 Parent Executable \Device\HarddiskVolume3\Battle.net\Heroes of the Storm\Support64\HeroesSwitcher_x64.exe
GFX 23:56:28.143 Grandparent Executable \Device\HarddiskVolume3\Battle.net\Battle.net.7505\Battle.net.exe
GFX 23:56:28.143 LocalTime 2016-06-16 23:56:28.143
GFX 23:56:28.143 <ComputerUser> Toby
GFX 23:56:28.143 <ComputerName> SPEEDDEMON
GFX 23:56:28.143 <Exe.Architecture> x86_64
GFX 23:56:28.143 <Version> 18.4.43571
GFX 23:56:28.143 <DataBuild> B43571
GFX 23:56:28.143 <CodeBranch> branches/Heroes.18.mid
GFX 23:56:28.143 <CodeRevision> 293141
GFX 23:56:28.143 <Locale.Assets> enUS
GFX 23:56:28.143 <Locale.Data> enUS
GFX 23:56:28.143 <Locale.Install> enUS
GFX 23:56:28.143 <AccountCountry> GBR
GFX 23:56:28.143 ====================================================================================================
GFX 23:56:28.142 DXGI: Available
GFX 23:56:28.267 Resource Cache Override Variable: 0MB
GFX 23:56:28.267 Resource Cache: 2036MB Win64 (8147MB Physical, 13271MB Proces... Read more

3 more replies
Answer Match 80.22%

Windows 7 desktop can not load after welcome screen appears just a black screen come and stuck a white mouse pointer works but nothing else.

safe mode works and last known good configuration works

whenever i start in above mentioned mode it works and then i had repaired win. 7 startup and chkdsk perform on c drive. then restart the system and it start properly as it worked. But after a day i start same problem came again.

pls. suggest any permanent solution.

A:Black Screen on Windows 7 startup

Test your hard drive and ram use seatools for dos for the hdd and memtest 86+ for the ram

3 more replies
Answer Match 80.22%

Good morning,
always it happens that on the startup of windows 8.1 (and also when it was installed windows 8 before the windows 8.1 upgrade) after the republic of gamers logo and before the appearance of the lock screen, the monitor remains completely black for 5 minutes about (after that appears the lock screen and windows works again well). Usually Windows starts itself in 10 seconds about. During the black screen commands don't works. Can be the use of cc cleaner, that cleaning temporary files, creates this problem? I tried to reinstall the last version of the Nvidia display drivers but nothing changed. I took away all those unuseful programs from the windows startup. What can I do? Thanks and I'm sorry for my bad English.

I have a Asus ROG G750JX-CV200H Notebook bought 2/3 weeks ago:
Windows 8.1 home
Core i7 4700HQ
RAM 16GB DDR3
Nvidia GeForce GTX 770M
HDD 750GB 7200rpm

A:Black screen on windows 8.1 startup

Hi, Welcome to Eight forums.

Issue could be mixed set of graphic card drivers. Your PC might be downloading the vendor's drivers and hardware drivers together. Also, windows makes a backup copy of the drivers and puts them into its driver store for you and keeps putting it back on your system if the driver is deleted. You need to go into control panel, disable the autoinstall of device drivers, uninstall the video driver, reboot, and install with the vendors setup program and reboot. Then enter control panel and re-enable the autoinstall of the drivers again.

3 more replies
Answer Match 80.22%

System Details -
 
Lenovo Y500 Laptop
120GB SSD as windows drive
1TB Drive as storage drive
 
Problem Details - 
 
My laptop has been running with no problems at all. This morning I switched it on and after the welcome screen I just get a black screen and it stays there. There is no cursor and no ability to enter task manager
 
Attempted Repairs -
 
I've tried booting into all 3 safe modes, low res mode and last good config, which just give me the same blank screen. I've tried startup repair which finds no problems. I've tried running sfc /scannow but it gives me a message saying that "there is a system repair pending" and that the laptop need to restart. I have also run chkdsk (chkdsk C:) on both drives which finds no bad sectors and gives no warnings. I have also tried clearing cmos by removing the battery and power and pressing the power button for 2 minutes. I would use system restore but I stupidly have no restore points.
 
My only guesses now are that the user profile is corrupt (but this usually gives a message rather than a black screen), the windows installation is corrupt or I have some virus/malware. I'm not sure how to proceed.
 
Thanks

More replies
Answer Match 80.22%

Windows 7 desktop can not load after welcome screen appears just a black screen come and stuck a white mouse pointer works but nothing else.

safe mode works and last known good configuration works

whenever i start in above mentioned mode it works and then i had repaired win. 7 startup and chkdsk perform on c drive. then restart the system and it start properly as it worked. But after a day i start same problem came again.

pls. suggest any permanent solution.

A:Black Screen on Windows 7 startup

Hello SKumar.
Have you changed/ added any hardware/software lately just before the problem started?

Do a System Restore to an earlier point.

Does it work?
If not, we are to some other things.

9 more replies
Answer Match 80.22%

Hello Guys, Yesterday I had A problem with my PC
I started it and pressed the Power Button. After the ASUS splash screen my PC went to A black screen.....

There is no Startup Logo No Blue windows logo (blue rhombus) And no spinning chain.

And after 30 mins my PC rebooted and when I pressed F8 to go to safe mode nothing happens but the black screen comes again......
So I booted to my Windows 8 64-bit DVD and launched startup repair but it showed "error startup repair cannot fix your computer" then I came back and started Refresh my PC but now it showed another error message that "there is a problem refreshing your computer" and now when I came back and started "Reset" it again showed up the message "there is a problem refreshing your computer".

I can't fix the problem......
I have also tried "Advanced Option > Command Prompt > sfc \scannow" but it didn't help...

So please help me, I had many personal files on this OS so I can't Format it.

Thank For Any help.....

A:Windows 8 Black Screen At Startup

First of all unplug any USB devices you don't need especially hard drives. In bios turn off S.M.A.R.T HDD check at startup.

See what happens when you do that.

2 more replies
Answer Match 80.22%

Following an unsuccessful attempt to install Adobe flash player (I'm not saying that caused the problem, it might be completely unrelated, but anyhow ...) when I start up I get the 'welcome' screen and then a permanent black screen with a cursor. I can get round this with the task manager but I'd rather it started up correctly in the first place. Any ideas, please?
 

A:Black screen on startup Windows 7

16 more replies
Answer Match 80.22%

I Minimized My Windows XP VM While It was installing, and now every time i start the Virtual PC, it stays at a black screen...
Does Anyone Know How to fix this? Without reinstalling.....
BY THE WAY, I AM NOT USING XP MODE...

More replies
Answer Match 80.22%

When I start my windows 7 laptop, I get a black screen. It doesn't bring up the windows logo, errors, or options such as the boot menu. My Computer was working perfectly fine a few hours ago, but then my computer updated windows 7. After the update, my computer was still working. I noticed some lag, so i opened task manager and killed a few processes that i felt were unneeded.. (Maybe they were essential?) Then when i restarted my computer, this problem occured.

Please Help!
 

A:Black Screen Upon Startup (Windows 7)

Hello,
Can you access the diagnostic screen (F8 key) to try and start in safe mode or using the last known good configuration? Can you boot from the Windows 7 installation DVD and choose to "Repair my computer?"
Regards
The Cleaver
 

3 more replies
Answer Match 80.22%

Hi,
 
Yesterday, I updated my windows 8.1, the process went well until the computer restarted but just after the windows logo disappeared from the screen, nothing happened and just the mouse pointer is visible on the screen. I tried startup repair from windows DVD, and other recovering options, but no result. I don't want to loose my installed apps and other files. is there any safe solution to this problem. thanks in advance
 
Laptop: LENOVO G500
Systeme: windows 8.1 (64)
 
 

A:windows 8.1 black screen on startup

One other thing
 
I've just tried "startup repair" using windows installation DVD, but it seems that the startup process goes well, because in the log file (srtTrail.txt) it is mentionned that the startup process is ok.
 
I tried to "refresh my computer" but it asks me to agree with deleting all apps installed from disks, thing that i don't want for now.
 
I hope thess informations can help 
 
Waiting for your advices.

1 more replies
Answer Match 79.8%

... after 15 minutes of hanging in that weird startup screen, considering whether to hard reboot or not, it went into start repair (still there now)...

To make a long story short, I suspected something wrong with my hard drive due to a software giving me an i/o error, after some research (I am not knowledgable when it comes to computers), I ran chkdsk, when I woke up it was still running as it should be (in the process of 'replacing bad clusters' for certain files... so there was something wrong alright) and was at 28%.

After leaving my computer for ten minutes, I found my computer had gone to a black screen and seeing as I was reluctant to do a hard reboot, I waited it out and it moved to a windows safe mode startup screen... but only the big cursor and standard background was present, nothing else (see attached picture). After ten minutes it went to startup repair, which has been running for the past half hour.

What has happened during the ten minutes I was away and chkdsk was still only at 28%, why did the subsequent events unfold as they did? What can I do now??

A:chkdsk ran 8 hrs, then black screen, then weird startup screen, then..

Hello Kayron can you still get into safe mode did you say? If so go in and run sfc /scannow

SFC /SCANNOW Command - System File Checker

if that doesn't run then maybe you have a hardware problem.

4 more replies
Answer Match 79.38%

Hello there everyone. This is my first post on this forum and I am quite embarassed that it should be one where I ask for help.
Well, pride aside, I really have no idea what to do. I used my PC as sually this morning when suddenly it just froze. Very well then, it's Windows after all - not overly alarmed, I restarted. Now it takes full 10 or 15 minut to boot. First, I see the 'Welcome' message, which persists for a minute or two. Then, I see a balack screen and if I am patient enough after several minutes the startup is finally complete. If that wasn't bad enough, afterwards the PC is running very... Well, it's choppy. It often freezes for several seconds, which is no fun at all.
Just to be clear, I didn't change or modify anything lately, apart from installing Shockwave player yesterday. Also, I tried going into safe mode and deleting graphics card drivers, with no effect.
I would be very thankfull for any help or advice.
Cheers,
Vares
 

A:Windows XP startup problem, black screen

9 more replies
Answer Match 79.38%

For several months my laptop (HP Pavilion dv6) has been going black about 20% of the time that I start it up. It is more likely to occur when my laptop has only been turned off for a couple hours or less.

The startup process starts as normal, but then goes to black, with the exception of a strip of color that appears in the upper left part of the screen. I can't say for sure, but it might be a miniaturized (1/16th inch by 3 inch) version of my task bar.

The screen stays stuck and the only way out of it is to hold my power button till it goes off. When I restart it asks if I want to "start normally" etc., and it then often asks to do a checkdisk (which I've done to no avail).

I'm curious if anyone is familiar with this type of problem and has any suggestions on how to fix it.

A:Windows 7 Startup issue - Screen going black

1. Click Start
2. In the search box, type cmd
3. In the list that appears, right-click on cmd.exe and choose Run as administrator
4. In the command window that opens, type sfc /scannow and hit enter.

Report the output from the command window once it finishes.

More detail: SFC /SCANNOW Command - System File Checker

5 more replies
Answer Match 79.38%

Hi folks,

Today I started up my PC and after the windows XP loading screen, I got nothing but a black screen. No response from the PC to keyboard commands or anything, and the monitor was still showing it had a signal. Several reboots and I still had the same problem. Nothing beyond that screen.

I attempted to start it in safe mode and for some weird reason, it is telling me I haven't 'activated my copy of windows' and gets stuck in a little loop. Even though I clearly HAVE activated my copy of windows, as I've been using this Windows installation for months without a problem.

In any case, after the attempt at safe mode, I managed to get the machine to boot normally, but I am guessing it's something of a fluke that it finally managed to start.

Not sure if it's related, but ever since I installed a new graphics card in my machine, I have been having intermittent problems with the power button. For whatever reason, the power button does not always work, and it sometimes takes several tries to switch on. There appears to be nothing wrong with the power button wiring.

My PSU is quite new, and is a corsair 650W. It should be enough to power my system. I have a Biostar T560 motherboard, a 4400+ processor, and an Nvidia 460 graphics card. Currently I have 4 hard drives, including one whose windows installation is for some reason borked and is unusably snow yet works fine as a data drive.

A:Windows hanging on black screen on startup

Quote:





Originally Posted by Morgoth


Hi folks,

Today I started up my PC and after the windows XP loading screen, I got nothing but a black screen. No response from the PC to keyboard commands or anything, and the monitor was still showing it had a signal. Several reboots and I still had the same problem. Nothing beyond that screen.

I attempted to start it in safe mode and for some weird reason, it is telling me I haven't 'activated my copy of windows' and gets stuck in a little loop. Even though I clearly HAVE activated my copy of windows, as I've been using this Windows installation for months without a problem.

In any case, after the attempt at safe mode, I managed to get the machine to boot normally, but I am guessing it's something of a fluke that it finally managed to start.

Not sure if it's related, but ever since I installed a new graphics card in my machine, I have been having intermittent problems with the power button. For whatever reason, the power button does not always work, and it sometimes takes several tries to switch on. There appears to be nothing wrong with the power button wiring.

My PSU is quite new, and is a corsair 650W. It should be enough to power my system. I have a Biostar T560 motherboard, a 4400+ processor, and an Nvidia 460 graphics card. Currently I have 4 hard drives, including one whose windows installation is for some reason borked and is unusably snow yet works fine as a data drive. ... Read more

10 more replies
Answer Match 79.38%

Hey,
I was running FSX on my other desktop when the power cord got pulled out, I tried starting the computer again then found myself with the dreaded black screen and I don't know what to do.
When I press the power button on the desktop, everything seems to sound normal, fan going etc but no beeps.
Monitor light stays on amber however. I've tried another monitor and still the same thing. Tried the ol' take all plugs out, re-plug, then restart but still the same thing. I've tried letting it get cold and still the same thing.
I also took the RAM out, gave it alittle clean and still no change. I've also popped in the Windows XP disk to see if that would do anything but nothing as nothing shows up on screen. Keep in mind that the black screen is constantly there, i.e no Windows start up screen or anything.
I don't know what to do!!. Can someone please help??

Windows XP
Pentium 4 HT 3.0ghz
1GB DDR ram,(4x 256mbs)
80GB sata hard drive - secondary 40gb harddrive (120gb total)
1GB AGP ATI Radeon HD3650
Olympic ATX 400W Power Supply
onboard sound
dvd rom
parellel port
3x pci slots
 

A:Dreaded black screen pre-Windows startup

Pull out the memory and try booting. If you don't hear a series of long beeps the power supply or motherboard has been damaged
 

1 more replies
Answer Match 79.38%

I installed W7 Ult 32 bit some weeks ago on Drive C: and since then I got upon starting a clack screen with :

Windows 7
Windows 7

after xx seconds it goes on with the, I presume, the first one.
i think it might come from a previous trial,not
activiated W7 version, or some unfinished W7 installation.
I do not see any windows.old somewhere..

How to get rid of this,it delays my startup.???

I made a W7 backup just for security on Drive D:
Thanks for help,
William R.

A:Double windows 7 in startup black screen

have you tried here?

4 more replies