Tech Problem Aggregator

Blue screen at startup, freezes at welcome screen, works when monitor unplugged

Q: Blue screen at startup, freezes at welcome screen, works when monitor unplugged

i'm sorry but i've had it. so here is what happens:
1. first you should know i had to take my pc to the shop, bought a new hdd and reinstalled windows xp service pack 3
2. I press the power button, windows start loading, sometimes a blue screen appears and if you wait long enough a welcome screen and that's it. Sometimes is goes past the welcome screen, it loads normally and freezes after half an hour. I took it to the shop and it worked fine there. Brought it back home, still blue screen etc. It start normally if i unplug the monitor. Sometimes, if i plug it back in, the monitor start normally, other times it just stays black. i'll give you any information needed, but it will take a while since i don't have the heart to restart my pc this many times. i think in the last two days i've restarted it like 50 times, no kiddin'.

ok. thank you.


System:

AMD Sempron(tm) Processor
3000+
1.80 GHz, 512 mb of RAM

Monitor:

Samsung, syncmaster 943sn

Graphic Card

nvidia geforce 210
Also, here are some errors, warnings from the system log:

The NVIDIA Update Service Daemon service failed to start due to the following error:
The system cannot find the file specified.

The DNS Client service could not contact any DNS servers for a repeated number of attempts. For the next 30 seconds the DNS Client service will not use the network to avoid further network performance problems. It will resume its normal behavior after that. If this problem persists, verify your TCP/IP configuration, specifically check that you have a preferred (and possibly an alternate) DNS server configured. If the problem continues, verify network conditions to these DNS servers or contact your network administrator.

Timeout (30000 milliseconds) waiting for a transaction response from the NVSvc service.
The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible. No attempt to contact a source will be made for 14 minutes. NtpClient has no source of accurate time.

A: Blue screen at startup, freezes at welcome screen, works when monitor unplugged

It seems to me that you might have a bad/dying power supply unit.

How long have you got the computer?

Take it to the shop and let them test it.

1 more replies
Answer Match 100.5%

i'm sorry but i've had it. so here is what happens:
1. first you should know i had to take my pc to the shop, bought a new hdd and reinstalled windows xp service pack 3
2. I press the power button, windows start loading, sometimes a blue screen appears and if you wait long enough a welcome screen and that's it. Sometimes is goes past the welcome screen, it loads normally and freezes after half an hour. I took it to the shop and it worked fine there. Brought it back home, still blue screen etc. It start normally if i unplug the monitor. Sometimes, if i plug it back in, the monitor start normally, other times it just stays black. i'll give you any information needed, but it will take a while since i don't have the heart to restart my pc this many times. i think in the last two days i've restarted it like 50 times, no kiddin'.

ok. thank you.

System:

AMD Sempron(tm) Processor
3000+
1.80 GHz, 512 mb of RAM

Monitor:

Samsung, syncmaster 943sn

Graphic Card

nvidia geforce 210

Also, here are some errors, warnings from the system log:

The NVIDIA Update Service Daemon service failed to start due to the following error:
The system cannot find the file specified.

The DNS Client service could not contact any DNS servers for a repeated number of attempts. For the next 30 seconds the DNS Client service will not use the network to avoid further network performance problems. It will resume its normal behavior after that. If this problem persists,... Read more

More replies
Answer Match 87.36%

As above my computer freezes up, my graphics card failed a few months ago so I bought a new one. I installed the latest nvidia drivers for it and downloaded and installed them. When I tried to play any games Left 4 Dead or MW2 through steam it would freeze up and pix-elate and then my computer would restart.
I figured it must have been a dodgy graphics card, so I bought a new one. I used the latest drivers and the problems persisted, So I used the drivers from the disc and everything was ok. Until last week when I started having problems again.
What happens now is the screen will freeze and nothing will work on the keyboard and you need to manually reset. If I use the latest drivers it will pix-elate and switch off itself.
I have had the RAM checked that's ok, the temperatures have been tested and are fine. I tried another graphics card and removed all drivers and didn't work.
I have also formatted the computer which has made no difference.
Is there anything else that it could be, possibly processor, PSU or motherboard or could it be the power source in the house. I don't want to replace things if they are not faulty.
If you require any computer spec or error reports if they come up I will post them later for you
 

A:Computer freezes and then restarts with a quick blue screen before startup

Give us your system hardware icluding make and model. Also...

How to find and post your Minidump Files:

My Computer > C Drive > Windows Folder > Minidump Folder > Minidump Files.

It is these files that we need (not the folder). Attach to your next post the five most recent dumps. Notice the Manage Attachments button at the bottom when you go to post the next time. You can Zip up to five files per Zip; if you only have one or two you don?t need to zip them, just attach as is. Please do us a favor and don?t Zip each one individually.
 

16 more replies
Answer Match 80.64%

Hey everyone, I seem to have a recurring problem that I just can't puzzle out on my
own and need some help here.

A few months ago I had to replace my power supply unit, and at the same time decided to
upgrade my RAM and OS (moving from Windows Vista to Win 7).
Before I was running on 1 gig of DDR2 PC2-5300 667 MHz. I updated it to PNY 4 gigs
(also DDR2 PC2-5300). Computer kept restarting so I brought it down to 2 gigs - things
worked ok for a little while and then I started to have similar problems again. My PC
continually restarts itself randomly, Displays the Blue Screen after an hour or so of
operation and constantly freezes on the starting Windows 7 logo screen.
I have absolutely no clue where these issues could be coming from. All of the RAM seems
to be accurate spec wise and I don't believe the Power Supply to be at fault. Also, this is more recently, whenever I try to sync up my iPod with iTuens, my system also decides to restart itself randomly during the sync. Any help
on the issue would be GREATLY appreciated.

Below are additional PC specs:

- OS Windows 7 ultimate 32bit
- CPU, Intel Core 2 - (2) of them at 2.13 GHz
- 2 Gigs PNY RAM
- (any additional specs needed - please let me know!)

I'm out of ideas here; any suggestions would be very appreciated. Thanks!
 

A:DELL XPS710 - Blue screen/ Windows restarts itself/ Freezes on Starting Screen

15 more replies
Answer Match 80.22%

When I boot my computer up my computer is freezing up once in a while at the loading screen with the blue loading bar. The bar goes across about three times and the on the fourth time it stops and freezes and nothing happens after that. Once in awhile it will go to a blue error screen witht the following codes: 0x0000008E (0xC0000005, 0xF9787C09, 0xF9677FE8, 0x00000000). Someone please help.

Thank you.
 

A:Windows XP loading screen freezes and blue error screen

9 more replies
Answer Match 79.8%

My Laptop screen had been working perfectly for months. Then out of the blue It started to get washed out white.
I do not know how long this has been happening or when it started but I just noticed it recently on a trip.
I use my Acer Laptop as a work PC so it's generally plugged into a Monitor. I was traveling & I brought it
with me. I turned it on & all seemed normal. The 4 flying Win7 colors did there dance as the system started to boot up.
Then I'd see the "Login" screen for a second or 2 then Bam, the screen went white out of nowhere! I thought I was the
victim of some kind of "white-screen-of death". The Laptop is barely a year old. Then I noticed if I tilted the screen
all the way forward I could make out the Login screen icon & window. I typed my password & it continued to boot up.
Now my desktop was normal with all the colors correct. I figured it was a weird glitch, a 1 time thing. After about
20-30 second the screen when white again! Now there was no way to get it back to normal. I could see everything on my
desktop in the faded white washed out background. I ended up doing emails in that condition. it sucked.
-I've tried rebooting 5x times. Same thing happens
-I've check & installed all latest Windows Updates.
-I did Virus & malware scan 2x with nothing dangerous found.
-I checked to see if my brightness level was somehow set all the way up. Nope.
-I started in Safe mode 2x. It does NOT get the White ou... Read more

More replies
Answer Match 79.38%

Hi there,

I have been stuck with the above issue for the last couple of days and would appreciate some help asap. In reflecting on the above the comp. is at the point where it is continuously restarting. I was able to insert the installation/required disk it was asking me for earlier and was able to open up to a screen resembling safe-mode. However, I can no longer do this on my own or through "start-up repair".

If it is helpful, in reading the start-up repair screen and seeing, "windows cannot repair the comp. automatically" as well as looking throughthe "problem details" I see recall seeing possible registry errors such as, "rollback registry"

If this can not be fixed or is not a quick fix I am also open to the idea of reseting/reformatting the hard drive but only if I can recover some files using open-source software such as recuva or the like.

Appreciate the help
 

More replies
Answer Match 79.38%

Hello.

Just today, I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : \windows\system32\config\system."

You can attempt to repair this file by putting the winxp cd in etc...

Now when i turn on my computer there is just a black screen showing, with nothing at all on it.

Any ideas anyone?

Thanks very much for your help.
 

A:Blue screen of death, boot problems, black screen startup

It's a nasty error that requires some persistance and resourcefullness to overcome without a clean install.

If you have a Windows CD or have the recovery console installed, you might want to have a go at these directions.

http://support.microsoft.com/default.aspx?scid=kb;EN-US;307545

Forum example of a successful recovery here:

http://forums.techguy.org/showthread.php?s=&threadid=195985
 

3 more replies
Answer Match 79.38%

Hi all,

Starting yesterday my computer would go through startup... while loading the desktop it would crash to blue screen with white text (unfortunately, I can't remember the exact error message). If restarted, it either goes to a blank black screen or back to blue, and I could only get the computer to operate in safe mode with networking. My antivirus software (avast free, malwarebytes)scanned and found no infections.

I have Windows 7, Samsung laptop.

Today, I was able to start the computer normally and am functioning with internet (still acting a little funny), but I am sure something is still not right. I also did a system restore last night, with the same problems (crashing, not starting up).

Any assistance would be highly appreciated!

Thanks in advance,

Brit

PS: I (goofily) started a similar topic in the "Windows 7" forum section without knowing this section was down here... Sorry! I tried to delete the topic/post but couldn't. Thanks.

A:Blue Screen with Error Messages, Blank Black Screen on startup

Hello,I will be helping you with your problems. Please be patient while I assist you.Some points for you to keep in mind while I am helping you to make things go easier and faster for both of us Please do NOT run, install or uninstall any programs, unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability. Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post. Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process. Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At the top of your post, click on the Watch Topic Butt... Read more

14 more replies
Answer Match 79.38%

Hi, thanks for checking my question. I haven't found an answer to my particular situation:

Dell xps m1430 laptop w/vista (32).

It all started with a blue screen w/scrolling text after the fated restart. The blue screen text said "if this is the first time you've seen this message..." and then comp restarted, again showing the blue screen, then restarted into windows repair mode, after repair mode tried to fix the problem comp restarted, then the screen went black / blank right after the little windows loading animation (where the bar keeps moving from left to right and there's a small windows logo).
It all happened fast, so there may have been steps I forgot, but that's the jist of it.

Now screen always goes black / blank during startup after the windows loading animation, so I can't start windows in normal mode.
I can start in safe mode if I manually force shutdown by holding the power button, so I'm not imploding with fear... ok I am.

Possible causes:
1. This occured right after installing 11 vista updates (that restart was when I saw the blue screen)

2. Also occured the restart after running a patch called "Vista TCP/IP and UAC AutoPatch 6.0" I downloaded it from softpedia, the developer was listed as defcon, and their website listed was securevista.net, but the site is down(I found this out after the problem occured). The patch had lots of positive reviews, and lots of people on other sites also suggest using it to re... Read more

A:Solved: Black screen of death at startup, all began with a blue screen

7 more replies
Answer Match 78.12%

Hello, I'm not sure why i have such long start up screens, or what information you may need. But after my blue screen i log back into windows 7 RC and this shows up:

Windows has recovered from an unexpected shutdown

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7057.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: a
BCP1: 0000000000000010
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF800030471C5
OS Version: 6_1_7057
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\011110-187466-01.dmp
C:\Users\Steven\AppData\Local\Temp\WER-241005-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Highlights - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:Long Startup screen and Blue screen every 2-3 hours

We need the dump - otherwise try Who Crashed:

Resplendence Software - WhoCrashed, automatic crash dump analyzer

5 more replies
Answer Match 76.86%

I was able to transfer the hard drive to another HP laptop I have and it started fine and installed the drivers for it on startup...

The problem happened yesterday after gaming for a while, restarted the computer and BSOD came up after the black windows starting screen. I could get in with safe mode but only for a few moments before the computer just automatically shut off, like someone just pulled the power to it...

I checked with BlueScreenView on this computer and saw bug check string SYSTEM_SERVICE_EXCEPTION bug check code 0x0000003b which according to microsoft is "linked to excessive paged pool usage and may occur due to user-mode graphics drivers crossing over and passing bad data to the kernel code."

If someone could look at the files and hopefully some ideas how to fix it, would be great thanks

A:Help please - Blue screen after windows startup screen

bump?

8 more replies
Answer Match 74.76%

When I plug in or unplug my external display to my laptop, my display options no longer automatically reconfigure as they used to do. Now if I unplug the monitor, Windows acts as if it's still there, and windows that were on the monitor stay offscreen (as does the cursor, if that's where it was). I can manually move the cursor back, right-click load graphics properties and make changes OR do an F-key combo to move everything back on the laptop screen OR program a hotkey but these are all pretty annoying for one reason or another.

Any ideas about the cause? Unfortunately this must have started happening sometime in the last two weeks--at the same time as I made a load of major computer changes. However this did NOT include a graphics driver change (my graphics driver is current). At this point I feel it could be anything, but I'm wondering if it could be a recent BIOS update I did that HP recommended.

By way of troubleshooting I did run Windows in safe mode with ONLY the "ATI Catalyst" and "AMD External Events utility" running on top of the basic services, in case a newly installed service was stealing hotplugging messages, but that didn't do anything. I've also gone exhaustively through my graphics driver settings to make sure everything there looks correct. No luck. Any ideas?

A:Autodetection of hotplugged/unplugged monitor no longer works

Hello slickh Welcome to the Seven Forums!

When you go to plug in or unplug the monitor you aded on is the laptop on or turned off completely? If you didn't shut it down using the shutdown option in Windows to power down fully before unplugging the monitor that would be one immediate concern.

The second item for why things can open on the part of the display you can't see is controlled by the display setting for dual monitors once Windows has detected a second one present. If you set the display to extend the desktop over to a second monitor that same setting would still be in use with or without the monitor being plugged in.

3 more replies
Answer Match 74.76%

Hello!
I'm in real trubble.. My computer is totaly protesting at the moment...
When I've turn it on, it just goes blue screen with a error message :

PAGE_FAULT_IN_NONPAGE_AREA

Technical problems:

***Stop: 0x00000050 (0xA0492000,0x00000000,0x805E8279,0x00000000)

Im totaly desperate... Can't really go onto the desktop. Can't even logg in.

If someone knows how to fix this, i would really appreciate all kinds of help
Thanks!
 

A:Blue screen - Nothing works...

If you can boot into Safe mode, reinstall your graphics driver. Boot into Safe Mode with Networking so that you can go online and download the latest driver.
 

3 more replies
Answer Match 74.76%

Everytime I go to works and start doing anything I get a blue screen and it says it has to do a scan in drive C. It does the scan and then returns me to desktop. This has happened about five times. This computer has windows 98 with the xp upgrade on it. (just installed).
No other new software has been installed.
 

A:Blue screen in works

Hello and welcome.
If windows is working ok, other than that problem this probably isnt the best forum for you.
To get the best help, you should really post this in the Office Applications forum
http://forums.techguy.org/f16/sc5dfe9b83f9d15ab450f777c979e9b25
 

2 more replies
Answer Match 74.76%

Hey all,

Just got the blue screen of death on my computer and so far nothing seems to work to fix it.

When i reboot the computer, i have the options for f2, f12, and f8.
When i hit f8 to try and reboot into safe mode or any other option in the f8 menu, it acts like its starting up windows for like 2 sec then goes right into the blue screen with this message:

A problem has been detected and Windows has been shut down to prevent damage to your computer. Blah blah blah

*** STOP:0x00000007B ( then has 4 other sequences of letters and numbers)

This started happening after I tried to remove a virus and it had something to do with Thinkpoint? or something like that maybe..idk if this is relevant.
I do not have a repair or reinstall disc but I am trying to get my hands on one. Can some one please give me some options on what to do? I dont mind reformatting my hard drive and starting fresh so that is an option. I just need this computer to work. Thanks.

- JP
 

A:Blue screen...nothing works :(

6 more replies
Answer Match 73.92%

Wondering if someone can confirm if I have a mobo problem.
My monitor is showing a black screen all the time.
It changes from Orange(Stand-by) to Blue(Active) at all the correct times.
This includes at boot up, moving the mouse or pressing a key to get out of stand-by.
I have tried different video card in a diferent slot.
I have tried a different monitor.
I have removed the battery from the mobo to clear the CMOS.
Thru network, I can access the hard drives and files that are shared.
Seems the PC runs fine except for no picture.
I can even hear the start up tune when windows kicks in.
Unfortunately the mobo does not have it's own VGA so I have no choice but to try a card.
It all points towards mobo but was hoping anyone out there might know something else I can try.
Cheers everyone for looking.
Cebby
 

A:Monitor Works But Black Screen

7 more replies
Answer Match 73.92%

Hi everyone,

Thank you for your time.

I have a friend's computer that is incredibly slow; it takes about 30 mins to get into Safe Mode. It won't boot up normally, usually freezes at the Dell logo or at the Windows logo, and have gotten two blue screens so far: "inmountable_boot_volume" and "kernel_data_inpage_error". I have noticed that this computer has both bearshare and limewire. When in safe mode it takes atleast 5 minutes to do anything, ie: opening My Docs. Below is HJT Log:

Logfile of HijackThis v1.99.1
Scan saved at 11:03:29 AM, on 3/14/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Kodak\Kodak EasyShare software\bin\EasyShare.exe
C:\WINDOWS\explorer.exe
C:\DOCUME~1\KIMMCI~1\LOCALS~1\Temp\Temporary Directory 1 for hijackthis.zip\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dell.com
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://red.clientapps.yahoo.com/cust...ch/search.html
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://red.clientapps.yahoo.com/cust.../www.yahoo.com
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = ... Read more

A:s-l-o-w, locks up, blue screen, the works...

duplicate being dealt with here
http://forums.techguy.org/security/551674-s-l-o-w-locks.html
 

1 more replies
Answer Match 73.08%

my sons laptop got switched over to the 'second screen only' option by mistake yesterday, to get round this problem ive plugged in an old pc monitor (as his hdmi port doesnt seem to work). i transfered back to 'screen 1 only' (and later on, trying to rectify the problem, been through 'extend', and 'duplicate'). all was fine i thought until i unplugged the vga cable, and both screens have gone black.
the laptop screen now only turns on when the monitor is plugged. it loads the toshiba logo at start up, then turns off before the loading screen and password page.

model: satellite c50-b-1c4.

if anyone can help i would be greatly appreciative as i spent all yesterday trying different things (icluding hard restart) and searching through half the internet.

More replies
Answer Match 73.08%

I recently got a used computer from my cousin that I am trying to set up for my kids. When I turn it on there is only a black screen. It shows nothing. Not a cursor or anything. You can hear the computer start up (the fan, etc) and the green light comes on. I tested the monitor on another computer and it works just fine. My next guess was maybe video card? Bought a new one and inserted but the same happened. I was hoping that maybe after I inserted it I could go to a boot screen and instruct it to install from CD before trying to load Windows by typing f8 or f12 @ startup. No go. Total black screen still. Not even a cursor. It's a dell. I'm not sure what year but relatively new (within the last 10 years). I think Window's XP Home Edition. The inside looks clean. No noticeable sign of damage.

Thanks for your help.

A:Total Black Screen but Monitor Works

Hi -You might hear a fan or other noise , but is there a Beep sound as the computer warms up ready to start - If not the problem may be a hard drive - Thank You -

2 more replies
Answer Match 73.08%

I tried to use the tool to upload the dump files but the forum tools dont recognize the zip file so i am cut and pasting them below. Basically my computer works fine in safe mode. I tried a clean boot but it failed and also crashed in debug mode from ms config. here is the blue screen info and my system info:

Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8006A3F038
BCP3: 00000000FE200000
BCP4: 000000000001117A
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\102912-18298-01.dmp
C:\Users\Owner\AppData\Local\Temp\WER-50684-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt

here are the event logs:


vent[0]:
Log Name: Application
Source: ESENT
Date: 2011-06-13T06:37:52.000
Event ID: 103
Task: General
Level: Information
Opcode: Info
Keyword: Classic
User: N/A
User Name: N/A
Computer: WIN-I9AIED4KP57
Description:
Windows (2436) Windows: The database engine stopped the instance (0).

Event[1]:
Log Name: Application
Source: Microsoft-Windows-Search
Date: 2011-06-13T06:37:52.000
Event ID: 1013
Task: Search ... Read more

A:comp works in safe blue screen in reg

Stop 0x124 - what it means and what to try

Try it.

1 more replies
Answer Match 73.08%

Hi - my first time using a tech forum so sorry for any newbie stuff. Whilst using my PC it crashed, then when I tried to reboot I get the blue screen. Reboot allows safe mode functionality with netwroking. On one reboot I did see a note saying cleaning boot of a file in john/mydownloads/nvVidia/nvidiaZwinky.driver....or somthing like that but still no joy after that in booting. It's not in that file either when I looked. I've got my Hijack log here for anyone who knows better than me to comment on. All thoughts much appreciated. I've attached my dxDiag as well. Since it's started in safe mode some info obviously missing, sorry.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:49:53, on 22/08/2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v8.00 (8.00.6001.18813)
Boot mode: Safe mode with network support

Running processes:
C:\Program Files (x86)\Trend Micro\HijackThis\HijackThis.exe
C:\Program Files (x86)\Lavasoft\Ad-Aware\AAWTray.exe
C:\Program Files (x86)\Mozilla Firefox\firefox.exe
C:\Program Files (x86)\HP\Digital Imaging\Smart Web Printing\hpswp_clipbook.exe
C:\PROGRA~2\MICROS~1\Office12\OUTLOOK.EXE
C:\Program Files (x86)\AVG\AVG8\avgcsrvx.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http:\\www.pcspecialist.co.uk
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page ... Read more

A:Blue Screen but works OK in safe Mode

HaHa..LOL....it was my ASUS 9800 GX2 that's failed on me. I had 2 in SLI and when the first went I sent it back to PCSpecialists who built it...apparently there's a new card on its way to me....fraid I didn't put 2 n 2 toghether when the blue screen happened, I disabled the card and now the PC boots but using basic graphics drivers.

Sorry for clogging up the forum.

 

1 more replies
Answer Match 72.66%

Basically this is a computer from someone at work. I have no idea what they visited to get these programs/viruses/trojans/malware... on the compouter or what they did to try to remove them. There are a few programs I downloaded to clean it but, it looks worse than I know how to fix.

DDS (Ver_2012-10-19.01) - NTFS_x86 MINIMAL
Internet Explorer: 7.0.6000.16982
Run by VALUE CUSTOMER at 12:43:25 on 2012-10-30
Microsoft? Windows Vista? Business 6.0.6000.0.1252.1.1033.18.3566.3167 [GMT -7:00]
.
.
============== Running Processes ================
.
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\wbem\wmiprvse.exe
C:\Windows\system32\wbem\wmiprvse.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k rpcss
C:\Windows\System32\svchost.exe -k secsvcs
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k NetworkService
.
============== Pseudo HJT Report ===============
.
BHO: Adobe PDF Link Helper: {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - c:\program files\common files\adobe\acrobat\activex\AcroIEHelperShim.dll
BHO: Java™ Plug-In SSV Helper: {761497BB-D6F0-462C-B6EB-D4DAF1D92D43} - c:\program files\... Read more

A:Black screen on startup, only works in safemode

Greetings and Welcome to The Forums!!My name is Gringo and I'll be glad to help you with your malware problems.I have put together somethings for you to keep in mind while I am helping you to make things go easier and faster for both of usPlease do not run any tools unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability.Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post.Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process.Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At the top o... Read more

3 more replies
Answer Match 72.24%

One of our computers, running Windows XP, has something wrong. I suspect a virus.

When it turns on, it goes to the Welcome screen and then the BSOD.

Being the knowledgeable chap I am, I tried Safe Mode and it starts up perfectly fine.

Other than that, I have no other information unless you want what the BSOD says.

Thanks for any help.

A:Blue screen of death on startup, normal startup on safemode

24 hours... *bump*

3 more replies
Answer Match 72.24%

The screen on my hp laptop suddenly went dead

the laptop works with an external monitor

Any suggestions as to how I can find out what's wrong or how I can fix it

hitting function key (which is supposed to switch from external monitor to laptop screen doesn't solve the problem
 

A:hp laptop screen dead, works w external monitor

9 more replies
Answer Match 72.24%

Hi there!

I'm here after spending most of yesterday trying to figure this out myself. I should have just come straight here because you guys have ALWAYS fixed my computer problems in the past.

My computer:

Windows Vista Home Premium (6.0, Build 6002) Service Pack 2; HP Pavillion m9100t; Intel Core 2 Duo E8400 @ 3 GHz; 2.47 GB Ram; 32-bit OS; NVIDIA GeForce 8800 GT; DirectX 10

Problem started when I turned on my pc yesterday morning. I had been walking around doing things and did not notice that it had failed to boot correctly. It was on a repair screen for some time and eventually notified me that it could not repair startup problem. After this I rebooted again and told it not to go to repair but to boot normally. It then went to a blue screen page which of course went by too fast for me to see much. I rebooted, this time in safe mode with networking. I set my computer not to automatically restart and then rebooted again so that I could read the bsod. I wrote down the stop error codes and rebooted to safe mode with networking again. Long story short, I didn't know what the error codes were, but I figured I could search them online. I ran all of my virus and malware scans, got the most recent windows updates (had already been at service pack 2, but there were some other updates) and started surfing the web for solutions. This was done over a period of time since I was also doing other things in the house. I did find that once in every 4 or 5 reboots, it will re... Read more

A:Blue Screen at start up, works in safe mode

9 more replies
Answer Match 72.24%

Here Are my issues.. Dark blue screen occasionally, My desktop icons changed to a default icon and my microsoft word 2007 icons turned into white pages& When I try to open them they wont run or I try to open a document and it tells me not enough memory. This is a fairly new computer and I'm not sure what the heck is going on! I'm about to rip my hair out!! YIKES!
Here is my mess!..

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 6:31:40 PM, on 1/12/2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18000)
Boot mode: Normal
Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\taskeng.exe
C:\Program Files\DellTPad\Apoint.exe
C:\Windows\System32\WLTRAY.EXE
C:\Program Files\McAfee.com\Agent\mcagent.exe
C:\Program Files\HP\HP Software Update\hpwuSchd2.exe
C:\Program Files\Microsoft Office\Office12\GrooveMonitor.exe
C:\Program Files\Common Files\InstallShield\UpdateService\ISUSPM.exe
C:\Users\Kara\AppData\Local\Google\Update\GoogleUpdate.exe
C:\Program
Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files\Windows Live\Messenger\msnmsgr.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Program Files\HP\Digital Imaging\bin\hpqtra08.exe
C:\Program Files\MSN\MSNCoreFiles\msn.exe
C:\Windows\System32\mobsync.exe
C:\Program Files\DellTPad\ApMsgFwd.exe
C:\Program Files\DellTPad\Apntex.exe
C:\Program Files\DellTPad\HidFind.exe
C:\Program Files\HP\Digital Ima... Read more

A:Blue screen, icons changed, works 2007 won't run,etc!!!

9 more replies
Answer Match 72.24%

Whenever I boot Windows 7, after it starts, instead of showing the login screen, it show a black screen with a movable cursor. Now, I can go into safe mode, and it works, but, hell, I can even put my password on that black screen, press enter and it will go into Windows and work just fine. But the thing is, it's supposed to show the login screen, not just a black one, so I'm a bit worried of what might be causing the problem, and whether or not it could expand into something worse. Any help would be appreciated.

A:Black Screen with Cursor on startup, but Windows works

hi kergal
press and hold f8 the power up the laptop then select repair ur computer select command prompt and write
chkdsk then write chkdsk /c
the exit
and make restart

2 more replies
Answer Match 71.82%

Windows 7 Enterprise, 64-bit, SP1

Monitor: LG 24EA53

Video Card: MSI N560GTX-Ti (Driver version 331.82)

Resolution: 1080p, 1920 x 1080; Refresh rate 60Hz, Color depth: 32-bit
I have a 2nd monitor in use as well, both nVidia and windows seem to have all settings detected and running fine.

I purchased a HDMI cable from the Source, their house brand, Nexxtech. Mini hdmi connection from video card to regular size on the monitor.

For the first few weeks things were fine, then, upon start up the screen shows hdmi detected but no signal, then monitor goes back to power saving mode. I have to unplug from the video card, sometimes 3 or 4 times to get monitor to come back on. Once running it stays on, even during screensaver. It's only upon startup I have to do this.

I didn't change any settings, so the only thing I can guess at would be the video card driver version, only guessing because I have never had this type of problem before.
Any suggestions are appreciated.
Thank you,

Robert
 

More replies
Answer Match 71.4%

My computer screen goes black when you unplug it, but the power light remains on and the fan continues to run.It also goes black after the HP logo runs if I try to start up on battery power only. When it's plugged in it's fine, usually, but sometimes it will randomly go off like it does when I unplug it.The battery has been replaced and didn't fix anything.I went throught the whole BIOS thing, didn't help. When it goes into this black screen, there is nothing you can do to get it back on except holding the power button down until it shuts off and then restarting.Thanks for your time.

More replies
Answer Match 71.4%

Hi,

I broke the glass on my laptop. Where can I get a new glass? Monitor works and I'm not able to bring it to service for a few weeks. I want to install the glass myself.

Thank you for some info

A:Portege Z30T-A-10X Broken glass on the screen, LCD monitor works

I can understand your wish to fix this alone but problem is that you cannot obtain such parts as easily as you think. All we can say here is: use Google and god luck.

By the way: without maintenance manuals and exact step-by-step instructions it could be pretty risky ?operation?.

I don't know where do you live and where you are at the moment but repair in any European country should not be problematic for you.

3 more replies
Answer Match 71.4%

(HP 2000 Notebook PC / Windows 8.1, 64 Bit) Blank screen always, external monitor works fine. What components could be malfunctioning? This occured about six  months ago, approximately one week after the one year warranty expired. Nonfortuitous.











Solved!
View Solution.

A:(HP 2000 Notebook PC ) Blank screen, external monitor works...

Hi, As you are confirming that issue is intermittent, and now its working fine, it means that issue would be of display cable. The display cable would be loose. Issue can be fixed by refixing the display cable, if the issue persists then the display cable needs to be replaced. This is the only reason, I asked you in the previous post whether issue was intermittent or display view changed while moving the display lid. This particualr issue has nothing to do with the temperature. Regards,Sumit I am an HP Employee

10 more replies
Answer Match 71.4%

When booting get Windows log in screen. After logging in, nothing but blue screen. When I log in in safe mode, after log in, initalizes fine and quickly
 

More replies
Answer Match 71.4%

my antivirus and spyware removal subcriptions both went out of date in oct. since then my computer will freeze up while on internet explorer for 20 secs. or so then evrything will catch up all at once. after this happened for about 3 weeks or so it finally froze up completely. when i tried to turn it off it gave me the blue screen asking me if this was the first time i had see this(which it was). when windows came back up it asked if i wanter to find solutions to this problem online. i said yes and it told me a driver and software for my intel wireless was outdated and it gave me instuctions on how to fix it. i did what it told me, but not sure if it installed right. i have not gone on the internet since except to do this. i just want to make sure nothing is wrong or that i didn't do this my self trying to be smart.

Gmer.txt
GMER 1.0.14.14536 - http://www.gmer.net
Rootkit scan 2008-11-07 14:11:22
Windows 6.0.6001 Service Pack 1


---- System - GMER 1.0.14 ----

SSDT \??\C:\Program Files\SUPERAntiSpyware\SASKUTIL.sys ZwTerminateProcess [0x90480F20]

---- Kernel code sections - GMER 1.0.14 ----

.text ntkrnlpa.exe!KeSetTimerEx + 854 8210AE18 4 Bytes [ 20, 0F, 48, 90 ]

---- User IAT/EAT - GMER 1.0.14 ----

IAT C:\Windows\Explorer.EXE[2492] @ C:\Windows\Explorer.EXE [gdiplus.dll!GdiplusShutdown] ... Read more

A:freezes and blue screen

bump !

2 more replies
Answer Match 71.4%

Hey Team,

Sorry if I have posted this incorrectly. Starting to pull my hair out over the constant freezes and blue screens in Win 7. Can you look at the below and provide some advice? Have followed your post about debug and info is below.

Thanks,

Microsoft ® Windows Debugger Version 6.11.0001.404 X86
Copyright © Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\MEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
Machine Name:
Kernel base = 0x82c17000 PsLoadedModuleList = 0x82d5f810
Debug session time: Sun Feb 21 14:34:03.456 2010 (GMT+11)
System Uptime: 0 days 0:23:54.769
Loading Kernel Symbols
...............................................................
................................................................
...............
Loading User Symbols

Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
************... Read more

A:Win 7 Freezes & Blue Screen

With one dump log it's impossible to say anything.Download BlueScreenViewNo installation required.Double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.

28 more replies
Answer Match 71.4%

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: a
BCP1: FFFFFFFFFFFFFFEC
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF80002CCBF83
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\060310-21450-01.dmp
C:\Users\AJC\AppData\Local\Temp\WER-32323-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:Freezes and Blue Screen

Try system restore and have you installed any drivers or new hardware recently?

2 more replies
Answer Match 71.4%

from another thread i read to download the service pack 4 for my windows 2000 pc.....i downloaded it and attempted to load it into my harddrive......there was some error on my pc so the entire service pack would not load at all but it was still on my computer sitting there. i looked and tryed to delete it since it was unusable....it told me that my computer might not run properly if i deleted it.....but since it never really was loaded onto m hardrive correctly i did not think it could do much damage....i deleted it....i logged off my computer.....a few hours later i came home and turned my computer on....within about 15 seconds of turning it on a blue screen popped up saying it could not find the source or the entry to the computer?? ...bottom line is that it would not boot correctly at all. i attempted many times yet the same thing happened. it also prompted to boot in safe mode. i did that but the blue screen popped up again. i am typing this on back-up computer that we have. i was wondering if anybody knows what i can to with my computer to fix it or get it fixed professionally which is a strong option. But I was wondering to see if there was anything that I could do before bringing it to a computer pro.i am fairly advanced with computers but this boggles my mind and I do not know what to do. if anyone knows anything to help me it would help alot.....thanks...
 

A:Blue screen before boot...won't start in safe mode or anything..nothing works.HELP!

11 more replies
Answer Match 71.4%

This is my second thread that is related to this issue, except my first one was related to a different stop error, so I decided to make a new one.

My problem: Whenever I boot into Windows normally (XP Media Center Edition), I get a blue screen with an error of page_fault_in_nonpaged_area, and a stop code of 0x00000050. I know this blue screen is usually associated with bad RAM, but I've run memtest with multiple passes and no errors...
-------------------------
I've tried:

a repair install (when it boots to start the installation, it still blue screens),

running chkdsk /r, fixboot, and fixmbr,

copying and pasting the windows files from the good install (I saved the old copy, just in case),

running memtest,

and uninstalling the most recent update.
----------------------------------

I also have a parallel install that works perfectly (same discs, same OS). I can access my files, but I'd like to get my old install working as it has all of my (expensive) programs that I absolutely can't lose.

Does anyone have any ideas on what to do, such as a utility to locate the corrupted files, and I would just be able to copy and paste them; or just any other ideas at all? I reeeaaally need the programs on the computer for school (by Wednesday), so any small amount of help is appreciated. Thanks in advance!

More replies
Answer Match 71.4%

hello.

Im sorry if i don't explain this very well but i will explain as much as i can and as clear as i can.

I have a:

Dell Inspiron 6400 Laptop
Windows 7

and when i start up it gets half way though the loading screen and it just sticks and doesn't move anywhere

i have already done a memtest from the ubuntu live cd and that come up with no errors, as shown:

and i also booted up my laptop well pressing the "fn" key and went into another system test and it passed, as shown:

i also changed the memory (ram) from other working dell inspiron 6400 laptop and no luck also changed the hard drive and no luck... i also put the memory (ram) and hard drive into my other laptop and it all booted up fine... so im really lost of things to do now im pretty close to just chucking it into the bin if im honest .

i tryed installing linux and that installs fine witch i though was a tad strange :/

any ideas though?

Thanks for all your help....
Ashley
 

More replies
Answer Match 71.4%

Firstly I'm on Win7 64. Over the last few weeks I've noticed that after starting up my laptop, and logging in just fine, the screen would go black for a couple of seconds-- my cursor would appear and I could move it around, but the screen would be black. After 10 seconds or so, the Win7 GUI would load just fine and there I would be.

I restarted my PC at 5AM this morning and it did the same. All I did at that point was send an e-mail via Gmail and shut it down again. At 2PM I went to startup my PC and everything went as usual except the PC never left that black screen with the responsive cursor.

I searched here and found that problem many times, but with one difference-- my PC starts fine in Safe Mode.

I used Advanced System Care to fix some registry errors and am currently running a Malwarebytes full scan.

It might be worth noting that I recently installed Batman: Arkham Asylum and as it was frequently crashing, followed some advice to enable everything at startup, which I did, fixing my game problem. That was around the time the black screen first started showing up, and I assumed it was a result of more things taking place during Windows startup.

Thanks in advance.

A:Black Screen with Cursor on startup, Safe mode works

Please follow http://www.sevenforums.com/crashes-d...tructions.html so we can assist you better.

-Justin

1 more replies
Answer Match 71.4%

Both on normal and safe mode startups, it's only a black screen with a movable mouse cursor.

- tried startup repair, no problem found
- tried sfc /scannow, told me it needed to reboot to do some repair operation, did nothing.
- system restore has no restore points
- cd-rom is dead/dying
- have an usb boot image thing and it loads files but then there is only the background image with mouse cursor, no setup or whatever appears. So, same as normal, only with a pic instead of black screen?
- tried both fail-safe and optimized bios defaults
- cleaned for dust and dis-/reconnected some wires
- doing a windows memory scan, because it seems the only option left

long back-story, short:

did a defrag a while back, there was a power loss, .dlls started not be recognized, tried to fix, but no success, found out cd-rom was dying and couldn't use the install dvd, wanted to use usb image to reinstall, but this happened so i never got the chance.

A:[SOLVED] blank screen on startup, only mouse cursor works

While you were in the BIOS, did you notice if the Hard Drive and CD were recognized?

We will need the specs of the computer, what is the USB image you talk about. You are going to need a way to boot from either a CD or USB to test the hardware.

If the hard drive was being accessed when the power failure occurred, there is a chance the drive has been trashed.

3 more replies
Answer Match 71.4%

I have scanned through the other posts and the closest thing that I could find to my problem seemed to involve a video card going kaput. I'm just hoping maybe one of you can confirm this for me before I take my pc up to the repair shop and they try to sell me something I don't need.

So, here's what is going on. Yesterday my Dell Dimensions (2500 I think?) was working just fine. I noticed the fan was running for quite some time so I got up to check and just as I suspected virus scan was performing a scan of my system. After the scan was completed I exited out of virus scan and figured the fan would stop running shortly. A few hours later I notice the fan is still running, so when I go to check my pc all I see is a black screen. The button on my monitor is flashing between yellow and red, so I restart my monitor and the test page comes up. It says my monitor is working and to check pc connection. After that I manually restart and the windows logo comes up but then we're right back to that black screen. I am currently in safe mode with networking which is obviously working just fine.

Now -- about two weeks ago the monitor that came with this system died. I snatched an older monitor from a spare pc in the house and attached it to this system. I don't know if that has any bearing at all on the events that have taken place but I wanted to let you know that I had infact made a change recently.

Thanks in advance for your help.
Ren
 

A:Solved: Black Screen on startup BUT Safe Mode works

11 more replies
Answer Match 70.56%

I have a problem which I expect is due to a corrupt BIOS chip. I'll explain everything I've done, so someone can perhaps figure out what I've done, and how it can be fixed.

A friend of mine asked me to format and re-intall windows due to it running very laboured and slow (I did add some RAM to help with speed). So, I used my old XP disk, but during set-up, there were quite a few files which couldn't be installed. XP then tried to start, but froze on the black XP screen with the blue progress bar running accross. I suspect the XP disk was damaged, so I tried again, using another XP disk, but it kept freezing in exactly the same place.

I then put another hard drive in, and had the original as the slave, and tried installing XP again, but still had the same problem. SO, I disconnected the slave, but no change.

I tried resetting the CMOS, and took the battery out a few times, for up to an hour, but no change.

I then got a hard disk from another computer with a working copy of XP on it, but with this one, it would go to the black screen asking whether you want to start in safe mode, but no matter what option I choose, it goes to the Blue Screen of death, with a 0x00000007B error.

I'm really desperate for help, as this is my friend's machine, and I'm worried I stuffed it up with a corrupted copy of my Windows XP disk.

A:XP Freezes and getting Blue Screen errors

You added ram and suspect it's something else? Remove the ram you installed and try again. Let us know what happens.

1 more replies
Answer Match 70.56%

Hey I have a Toshiba NB 205 - N 311 netbook When I turn the computer on It goes all the way to the blue screens for the windows x P logo then freezes there curses still moves but no startup screen the computer has no Cd drive to reload the XP program can someone please help me within some insight on what to do to resolve this problem I have thousands of family pictures and videos that I need to get off my coputer. please help I've tried the battery thing the F 2 the at 12 at the F 8 gone as far as holding down the 0 but then realizing that it's going to erase everything so I backed out what are my other options

A:freezes blue screen xp logo

Enter Safe Mode by tapping the "F8" key immediately after Power On.

While in Safe Mode, schedule a chkdsk to run on next reboot.

1 more replies
Answer Match 70.56%

Can someone please tell me how to fix this. Ok when I play GTA San Andreas sometimes the sound will freeze and then the screen will turn blue and it will have stuff saying there about bios or updates or disabling stuff and like 2 seconds later my computer restarts... I dont know what causes this. My comp specs are AMD Athlon xp 3200+ 2.21ghz nVidia GeForce FX 5600 Ultra 1gb memory Chaintech 7NJZ ZENITH Borton motherboard nforce 2.... Please someone help me out here!!!!!
 

A:sound freezes and screen goes blue

BUMP* please help me !!!!!
 

3 more replies
Answer Match 70.56%

When I start up my HP it stays frozen in a blue screen, how can I fix this? What info do I post to get an answer?
 

A:HP laptop freezes at blue screen

11 more replies
Answer Match 70.56%

Hi,
I recently bought a Samsung EVO 840 120 gb SSD and did a clean install of Windows 8.1 Pro on it. Also formated my other HDD's. And after that I started to experience at random times the complete freeze of windows and sometimes blue sceen of death with "clock watchdog timeout" message. They usually happens when I unpacking an archive, during file copy, downloading big files, istalling mods in nexus mod manager for skyrim or sometimes just in very random events. I noticed that usually when this happens hdd activity led on my pc case blinks continuously. When this freeze or BSOD happens I need to manually reset my computer. This problem is starting to get really annoying. Please can someone tell me how to fix this?
(Also most of the archives I download from the internet I get crc errors for most when I try to unpack them, so I have redownload it again :/)
My system:
OS: Windows 8.1 Pro
CPU: AMD Bulldozer FX 8150 Eight core Black Edition
CPU Cooling: Hydro Series H60 High Performance Liquid CPU Cooler
Motherboard: GA-970A-D3 (Rev. 1.0)
Memory: hiper blue 8 GB DDR 3
Graphics Card: Gigabyte AMD HD 6970 2 GB
PSU: Gigabyte 650 W
Hard Drives:
-Samsung EVO 840 SSD 120 GB (OS)
-Samsung HDD 500 GB
-WD HDD 2 TB
Nothing is overclocked. Everything has the latest drivers. Bios is updated to the latest.
I did CPU stress test got no errors.
I did GPU stress test got no errors.
I did RAM test got no errors.
Please help me

A:Windows 8.1 Freezes and Blue Screen

No memory dumps in the uploaded reports:





Upload Dump Files:
NOTE: If using a disk cleaning utility, please stop using it while we are troubleshooting your issues.
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift" key and left click on the last minidump file.
Right click on the blue highlighted area and select "Send to"
Select "Compressed (zipped) folder" and note where the folder is saved.
Upload that .zip file with your next post.

If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service. Then post the link to it in your topic so that we can download it.

Also, search your entire hard drive for files ending in .dmp, .mdmp, and .hdmp. Zip up any that you find and upload them with your next post.

Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file): Set MiniDumpMore info on dump file options here: Overview of memory dump file options for Windows 2000, Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Wind... Read more

26 more replies
Answer Match 70.56%

Hi everyone,

I hope someone here can help me out because i'm getting stuck trying to debug this issue.

Blue Screen Information:
A process or thread crucial to system operation has unexpectedly exited or been terminated.
Technical information:
*** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA80190D3B30, 0xFFFFFA80190D3E10, 0xFFFFF800039D4510)

I have read that the dump log file should be stored in Windows/Minidumps/ folder or directly under the windows folder called MEMORY.DMP but there have never been any such file created in all my crashes even though i have changed the settings from kernal dump to minidump and back and forth.

Symptoms:
The computer gets blue screen or hangs within 0-60 minutes.
The problem has occured when i am webborwsing, watching video or gaming.

Observations:
When the computer hangs, the orange load button on the computer is lit up constantly suggesting the hardrive is working nonestop.
I did some monitoring of when a freeze occured, it seems that there is a spike in activity CPU and HD then it goes dead and shortly thereafter the HD load goes to 100% all the time, dipping down brefily to 98% really fast then back up again.
After blue screen occurs, the computer has a tendancy to set my set my bios setting incorrectly. Trying to select my sotrage drive to boot before my SSD main drive. This result in a "reboot and select proper boot device or insert boot media in selected boot device and press any key" message at startup and i have to e... Read more

A:Blue Screen or Computer Freezes

Hi again,
After countless more hours of debugging I seem to have things up and running stable now again.
What i did was install windows 7 on a new SSD disk which i wasn't using, tested using only that disk installed and everything worked fine, got no freeze or bluescreens.
I then added my storage drive, everything still working fine.
I'm planning to try to use the old SSD disk as storage now instead and see if it works, if not i'll just throw the disk away.
So i've removed all partitions from the old SSD disk, formated it and updated the firmware as suggested, hopfully it will work and not cause any more problems.
So to conculed it seems that there was somthing wrong with the SSD disk, i'm not sure what at this point could be the old firmware that was bugged or became incompatable.
So if you have problem like i posted above i suggest you:
a) Try to update your harddrive firmware.
b) if a doesn't solve anything, try removing the windows disk and install a clean windows on another disk and try running with that disk only.


As an extra note, i noticed that my bios was set up to run the disks in RAID mode when i was fiddeling with the firmware updates.
This seems to be the default setting, since i haven't got my disks RAID configured i decided to switch to AHCI instead which seems more reasonable. I'm not sure if this was contributing to my freezes and blue screens somehow as well.

Hope this helps anyone else out there.

2 more replies
Answer Match 70.56%

I built a computer approximately 9 months ago, and about 3 weeks ago I came home and the computer was frozen. I restarted the computer and as soon as the motherboard screen and all following screens were garbled. So I figured that the video card must have failed. I put in a backup video card that I had and it worked for about a week. Since then the computer has been freezing and blue screening with error code 0124. It seems to mostly be blue screening when I am watching videos with VLC, it blue screens usually within 1 minute of the video starting. Twice, I was able to use the computer for two days without it freezing or blue screening. But for the past couple of days it has been worse than it has been for the past two weeks.

The motherboard, processor, RAM and hard drive are all 9 months old. The power supply is approximately 2 years old. The video card that was in there that is now garbled is about 2 years old. The video card in there since it has been freezing is about 4 years old, but for the past year it hasn't been used. I am using Windows 7 Professional 64bit installed 9 months ago.

Any help would be greatly appreciated. Please let me know if any additional information is needed.

A:0124 Blue Screen & Freezes

  
Quote: Originally Posted by Matt16803


I built a computer approximately 9 months ago, and about 3 weeks ago I came home and the computer was frozen. I restarted the computer and as soon as the motherboard screen and all following screens were garbled. So I figured that the video card must have failed. I put in a backup video card that I had and it worked for about a week. Since then the computer has been freezing and blue screening with error code 0124. It seems to mostly be blue screening when I am watching videos with VLC, it blue screens usually within 1 minute of the video starting. Twice, I was able to use the computer for two days without it freezing or blue screening. But for the past couple of days it has been worse than it has been for the past two weeks.

The motherboard, processor, RAM and hard drive are all 9 months old. The power supply is approximately 2 years old. The video card that was in there that is now garbled is about 2 years old. The video card in there since it has been freezing is about 4 years old, but for the past year it hasn't been used. I am using Windows 7 Professional 64bit installed 9 months ago.

Any help would be greatly appreciated. Please let me know if any additional information is needed.


These were all caused by hardware (124) as you said. They are at the same memory spot each time I would run memtest to verify yours and follow the below for the 124 stop

Download a copy of Memtest86 and b... Read more

2 more replies
Answer Match 70.56%

My computer randomly freezes and then goes to a blue screen but the text on it is garbled. Is this a hardware problem? I think something overheated.

edit: some more info: It happens after about 10 minutes. Suddenly, my cursor isn't able to move vertically but it can move horizontally. Then it completely freezes and leads into the blue screen. After I restart the computer, the cursor thing happens just a few seconds after windows startup, so I think it really is a heating issue.
 

A:randomly freezes with blue screen

I'm on the computer with the problem right now and here's my hijackthis logfile in case it's not hardware related.

Logfile of HijackThis v1.99.1
Scan saved at 8:19:05 PM, on 7/26/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\savedump.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\System32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\userinit.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\ATI Technologies\ATI Control Panel\atiptaxx.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\D-Tools\daemon.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Java\jre1.5.0_02\bin\jusched.exe
C:\Program Files\Messenger\msmsgs.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Silicon Image\SiISATARaid\SATARaid.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\WINDOWS\system32\wscntfy.exe
C:\Documents and Settings\Administrator\Desktop\HijackThis.exe

O2 - BHO: AcroIEHlprObj Class - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Program Files\Adobe\Acrobat 6.0\Reader\ActiveX\AcroIEHelper.dll
O2 - BHO: (no name) - {53707962-6F74-2D53-2644-206D7942484F} - C:\PROGRA~1\SPYBOT~1\SDHelper.dll
O4 - HKLM\..\Run: [ATIPTA] C:\Program Files\ATI Technologies\ATI Control Panel\... Read more

2 more replies
Answer Match 70.56%

I have my laptop set up with a dual boot system where there is a partition on my HD one for each XP Pro boot and one for my data. One of my XP pro boot system is designed specifically for photography and is kept clean to stay fast. I do not use it often, but last time I used it there was an error screen on start up but I did not write it down. I do not think I have made any installations or changes recently to set this off. Now when I try to start that system up it freezes. It goes through the black XP screen with the XP logo in the center and the progress bar below it. Then it goes to a light blue screen with the XP logo slightly right of center and freezes there. I have let it sit for 10 minutes or so and nothing. I have also tried F8 to boot in a safe mode but it still goes to the light blue screen and freezes.

I have not had this dual boot setup for very long but have had no problems so far. Is this a sign I should employee some sort of multi-boot software to help out or is this just a problem with this particular boot?

I had made a disc image of this system setup before this happened. Should I try to reinstall that image?

Thanks
 

A:XP Freezes on Blue Screen on start up.

Anyone, please
 

2 more replies
Answer Match 70.56%

We have a desktop at home that is totally unreliable. It always hangs every now and then, and even gives us a blue screen every now and then.

I am not really good with technical stuff so if anyone can be of assistance will be great.
 

A:blue screen errors, pc freezes :(

16 more replies
Answer Match 70.56%

Hi all,

I've enabled BitLocker (Win 10 Pro) on a Dell laptop Inspiron 5558 and all went well.

BUT.... When I power on the computer the familiar light blue BitLocker screen appears but there is no prompt to enter the key. Just a light blue screen, nothing else whatsoever. However, I can enter the BitLocker key (blind, of course) and then viola Windows boots up properly! So BitLocker is working.

I would normally suspect a display driver issue but the BitLocker code happens long before any device-specific display driver would load (right?). Anyone else seen this or have suggestion on what to do?

A:BitLocker normal light-blue screen but no unlock prompt. Still works!

Same Happening on a Windows 10 installed Dell Vostro 2520.
Also being reported over on the MS forums:
http://answers.microsoft.com/en-us/w...8bc3e62?page=2

3 more replies
Answer Match 70.56%

<article>

My HP laptop with Intel I 7 chip is running Windows 7 64 bit. The computer fan was racing and I was getting critical errors with the core temp approaching 210 degrees on cores 3, then 4, then 1. I ran anti Malwarebytes and it found 13 adwares which I removed.
Upon restarting when I tried to clik on any icons on my desktop or in my taskbar nothing happened. I tried rebooting but this did not fix the issue. I tried several attempts of system restore and sometimes would get a black screen after restarting. I undid
the system restore and in safe mode tried to find Windows errors but it said it found none.
What is causing this and how can I fix this without doing a full System recovery.

Another Windows Forum member said this:

Sounds like either a Virus caused this or the User Account is corrupted. 

First, let's try cleaning your system.

Download JRT, Save As, to Desktop. But, since the Desktop Icons are inactive, just run the tool at the first chance.
Malwarebytes Junkremoval tool

Download AWCleaner, Save As, to Desktop. But, since the Desktop Icons are inactive, just run the tool at the first chance.
Adwcleaner

Download CCleaner, to help clean your system.
CCleaner

Run System File Checker
SFC /Scannow System Checker

Still doesn't work, the next step is to create a new user profile. 


I think that's a virus (Still in the PC) or Corrupt User 


My suggestion 
1) Run Malwarebytes and make another scan (M... Read more

More replies
Answer Match 70.56%

Hi guys, there is a weird problem with my windows, sometimes it crashes and restarts and then during loading procedure it crashes on blue screen, which means the windows doesnt load, i tried it 4,5 times, each times it gives me a blue screen and the windows
doesnt load, but after a few hours, whenever I try windows loads, and works fine till it happens again(sometimes a few hours later sometimes a few days later)
 I have also Acronis backup , sometimes I have to recover it by Acronis to save some time,
my hard drive is totally new and got it tested, its 100% functional.
I would really appreciate any suggestions

More replies
Answer Match 70.56%

Even in safe mode I have some problems. Internet explorer restarts or windows explorer.

I have already cleaned out the inside of my computer and the fan .

I have already formatted the C drive and re-installed Vista. What can the problem be?

Also it doesn't allow me to install Updates, it usually gets an error message saying something like Internet Module or Host was closed. When I start Windows normally I usually hear the computer loading a lot, especially if I try to install a program or watch a video. And it crashes when I'm doing too much activity or sometimes just when im not doing anything

My computer is 3 years old. I have 3 Primary drives , from what I saw , the C D and E. And I have 1 external hard drive which I have turned off.

A:Vista works in Safe mode but crashes and gets blue screen in normal

***** Run hard drive diagnostics: http://www.tacktech.com/display.cfm?ttid=287 (or http://www.bleepingcomputer.com/forums/topic28744.html)Make sure, you select tool, which is appropriate for the brand of your hard drive.Depending on the program, it'll create bootable floppy, or bootable CD.If downloaded file is of .iso type, use ImgBurn: http://www.imgburn.com/ to burn .iso file to a CD (select "Write image file to disc" option), and make the CD bootable.NOTE. If your hard drive is made by Toshiba, unfortunately, you're out of luck, because Toshiba doesn't provide any diagnostic tool.***** A. If you have more than one RAM module installed, try starting computer with one RAM stick at a time.NOTE Keep in mind, the manual check listed above is always superior to the software check, listed below. DO NOT proceed with memtest, if you can go with option AB. If you have only one RAM stick installed......run memtest...1. Download - Pre-Compiled Bootable ISO (.zip)2. Unzip downloaded memtest86+-....iso.zip file.3. Inside, you'll find memtest86+-....iso file.4. Download, and install ImgBurn: http://www.imgburn.com/5. Insert blank CD into your CD drive. 6. Open ImgBurn, and click on Write image file to disc7. Click on Browse for a file... icon:8. Locate memtest86+-....iso file, and click Open button.9. Click on ImgBurn green arrow to start burning bootable memtest86 CD:10. Once the CD is created, boot from it, and memtest will automatically start to run. The running program wil... Read more

3 more replies
Answer Match 70.56%

I've had this computer for a long time and unfortuantely I've had major issues with it. Last night it was working perfectly and then when I tried to turn the computer on, it loaded and went to the startup screen with the microsoft logo and from there it got stuck. I tried to hit F11 and do a diagnostic test but when it was finished it told me the computer was not able to restart because of memory or something like that. I've also tried to take the battery out, but that didn't work either. I don't know what to do...can anyone help?   Product # LW233UA#ABAModel: g4-1104dx











Solved!
View Solution.

A:My Hp Laptop freezes at the startup screen.. Help!

Hi, Instead of using f11, try running diagnostices from the Bios Menu as follows. Shut down the notebook.  Tap away at the esc key as you start the notebook to enter the Start-up Menu.  Select the Bios option ( usually f10 ) and under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory.  Post back with the details of any error messages. Regards, DP-K

10 more replies
Answer Match 70.56%

I have a HP probook 6555b and it over heated then shut off and when I tried to restart it it got stuck with the HP logo and the little "press the ECT key for startup menu" at the bottom left I tried tapping the ECT button as I started it but it just got a little white outline box around the letters (it's done this before but I somehow managed to get it to work ) can you help me?

More replies
Answer Match 70.56%

After a hard slam on the lid of my HP laptop -in order to shut it- it froze, I shut it down and when I opened it again it said 'loading files' or something like that for a few seconds, then it would only go as far the welcome screen and while the next screen should be the laptop accounts, it just freezes there, no accounts, welcome message gone and the screen "zoomed in". Every time I open it it's the same, even if I choose the repair mode that is offered at the beginning. Removed the battery, still the same. Is the damage too great, or is it something I can fix on my own?

Thanks in advance.
 

A:Laptop screen freezes on startup.

Hello, since you mentioned a physical trauma, you could start by re-seating the memory modules and the hard drive. Also, what exactly did happen when you choose the repair option? Can you start in Safe Mode? From the advanced diagnostic, could you perform a Microsoft System Restore to an earlier date?.
Did you inspect your keyboard and switches for any sign of being dislodged or damaged in any way?
 

2 more replies
Answer Match 70.56%

This has happened to 4 different computers that I have encountered in the last 10 months.
 
One was a Windows 7 computer, the others Windows 10
 
They all have ASUS mobo and freeze at the ASUS F2/Del screen on startup
 
If I remove the hard drive, the system boots to BIOS ok
If I put the hard drive in a system that was working fine, the F2/Del freeze issue happens
If I put a known good hard drive in the system with the freeze issue, it starts fine
 
I have tried the CMOS battery reset
I replaced the mobo on one system
I tested different RAM on one system
No success
 
If I connect the hard drive to another computer using a USB enclosure, it is readable and I can copy files; just won't boot
 
Thinking maybe the Windows is corrupt or has some weird virus. Any suggestions to try to fix without having to reformat and reinstall Windows and programs?
 
Thanks!

More replies
Answer Match 70.56%

Hi Everyone,

Been a while since i've been on here as my comp has been behaving itself! Tried to turn it on this morning to check some addresses of carparks and as soon as it reaches the loading screen it freezes.

I turned it off by holding down the power button and went enter safemode and hopefully recover the system. I noticed that the writing which is usually black and white in safemode has some orange in it while highlighted.

Dunno if that's any help but I'd really appreciate some help as I am utterly clueless!
 

A:On startup freezes on the XP loading screen

16 more replies
Answer Match 70.56%

Sir,I am facing the same problem, i did boot it says 'windows faild to start. A recent hardware or software change might be cause' .. There are two options 'lunch startup repair (recommended) and start windows normally. I went through both, in case of 1st one, first shows files are loading then a screen comes with something processing but nothing happening rather than that, in case of 2nd (start windows normally) a screen of 'starting windows' reamains constant. I also went throuh bios option and under diagnosis i did self diagnosis of hard disk, % is not incriesing rather after sometimes it shows 'hard disk 1 quick (303), what should i do now? product number: D7Z60PC#ACJ, model- HP Pavilion g4 Notebook PC . Help me!

More replies
Answer Match 70.56%

My computer recently hasn't been able to boot past the bios screen and i can't enter the bios either.
The problem first started when i disconnected my psu to see if my other pc which had a dead psu would power up with this psu. Though i found out i needed a micro atx connector instead of atx on my other pc. So I installed my psu back into my original machine just to find out i got no display. So i removed my ram then booted her up again and got some beeps. So then i shut it off and put my ram sticks back in. The screen would show now but now i can't get past the bios screen or enter the bios setup. I googled around a bit and saw that taking out my cmos battery then replacing it with a new one could fix this issue. So I replaced the cmos battery with one of the same voltage and version which is a 2032. Well sadly the problem persisted anyways with the same results. So I googled some more and read that reseting the jumpers could possibly resolve the problem. I continued by reseting the jumpers like it said to but still no results still the same exact the problem. Now i'm here braking my head over this since I can't figure out the problem and i'm cluess to what the problem could be. My hunch is ethier i got a bad psu or bad mobo but the mobo gets power and shows it gets power by the bulb on the mobo and it starting up but suddenly freezing. I tried with a ps/2 keyboard since the usb keyboard would get no signal, so the ps/2 keyboard got power but I can't enter bios no matter ... Read more

A:Bios screen freezes on startup

nothing?

9 more replies
Answer Match 70.14%

First of all, I don't expect to find a solution to this problem, because it seems really weird to me. Recently, my monitor has been emitting a split second crackling/static like sound two or three times a day - I dunno. But when that happens, and I happen to be moving my mouse, it will freeze for a split second then go back to normal. But the screen doesn't freeze if I'm pan-scrolling with my middle mouse button. It's almost not a problem because of how infrequent and short it is, but I thought I'd post it in case anyone knew what the hell I was talking about. :P

It seems like it's been happening more often recently, that's why I've noticed it more and finally became inclined to post about it here. Hell, I'm not even sure if this would belong in this section of the forums. It could not be related to my graphics card, but since it sounds like the sound is coming from the speaker from my monitor, this is the closest place I could think of posting it. And yes, I've updated my graphics card driver to the latest one. I had 197.45 last time and updated to 257.21. Dunno why they jumped a lot of numbers cuz I update it every now and then.

So... anyone have any ideas?

A:Sound from monitor speaker, screen freezes for a second

That used to happen on "old" PC's and usually the problem was the graphics card. If you haven't done it, reseat the video card and see if that helps. With the PC powered off, disconnect the Video cable to the monitor and then remove the Video card. Then reinstall it, reconnect the Video cable.

7 more replies
Answer Match 70.14%

Hi, I am a newbie here but thought someone could help. I have and IBM T30, using a IBM Docking station. I have hooked a second monitor up to the docking station that allows me to have 2 monitors running off the one internal serial device. I have added an ATI rage video card to allow me to have 3 monitors working together. This has workied for other's in the past. Here is the problem, when you work for a little while it will then freeze, causeing you to have to hard boot, then it will freeze all the time. Another latop will do the same thing. I have swapped out to a different docking station with another card of the same type and it does the same thing. I have updated driver's and done everything I can think of. My laptop has 1gig of memory so that shouldn't be an issue. Please any suggestions? Please Help!
Gina
 

More replies
Answer Match 70.14%

Hello!
A couple of days ago my Inspiron 8600 laptop screen decided to quit working.  Prior to that, it worked fine.  It hasn't been dropped, etc.
My laptop works perfectly with an external monitor, but the laptop screen shows zero signs of life, at any time (during the boot-up, or after Windows is launched.)
1) I've done the diagnostic that I found on the Dell website.  Everything checks out on the external monitor, but again, nothing is happening on the laptop screen.
2) I've toggled back and forth between the laptop screen and the external monitor using the "Function" + "F8" keys.  All that happens is that momentarily I can turn off the external monitor, but nothing seems to affect the laptop screen.
3) the only thing that is worth mentioning is that I have been using a docking station for a while, and sometimes upon re-booting the computer in the morning, I get a message saying that "the computer was improperly turned off" (or something like that), and that I need to be careful about heat damage.  I then need to press the "F1" key to complete the re-boot process.  This may or may not have anything to do with the laptop screen not working.
 
What do you guys/gals think?  What can I do about this?  The computer is no longer within warranty.
 
thanks much -
 
Richard

A:dead screen on Inspiron 8600 8500, but external monitor works fine....!! ??

Given the age of the system, a worn out backlight bulb is the primary candidate - an LCD repair shop can change this for $100 or so.
 

15 more replies
Answer Match 69.72%

For a few weeks now my computer has been freezing and then going to the blue screen. After that, I can restart it normally. This can happen a few times a day, then not again for days. I decided to run super antispyware, but when I clicked on it, it says I cant run it and to contact the system administrator. This is my home computer, I am the administrator.
Then I tried to do a system restore while in safe mode and it wouldn't let me, again because it says I am not the administrator.
I let my nephew borrow my computer several times over the past months and I'm afraid he might have gotten a virus.
 
I'm very computer illiterate, but I'm running windows 7 home premium, 64 bit, AMD E-350 processor 1.60 GHz
Any help would be greatly appreciated!

A:My computer freezes and then goes to blue screen and reboots

I'm sorry that I have to agree with you. I too think that your system has been infected. I will ask a moderator to move this thread into the Am I infected forum so that you can get the expert assistance you need. Please read the instructions and follow their directions exactly. Makes things much easieer on both sides
Stay well and surf safe
 
Dick

5 more replies
Answer Match 69.72%

Hello,

My computer has been freezing up and running slow. I've gotten the "blue screen of death" more times than I'd care too. We did a clean up of files a while ago thinking that would help with the problem but it didn't. It only made it worse. The files that were deleted were only pics and things that we had saved so I don't think that it would be something that I got rid of. That doesn't mean that someone else in my family didn't. Help with this would be appreciated. Thanks

Here is my HJT Log: (if you need any other info please let me know)

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:26:36 PM, on 8/27/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16876)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Canon\IJPLM\IJPLMSVC.EXE
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\PROGRA~1\AVG\AVG8\avgemc.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\Program Files\AVG\AV... Read more

A:Freezes, running slow, blue screen

14 more replies
Answer Match 69.72%

I am having problems with my computer randomly crashing. It's becoming a pain.

Didnt have a clue what was causing it.

So I decided to:

update all my drivers that I could think to update (used device manager to do so).I cleaned my computers inside.Updates my virus scanner - am protected. (Avast)cleaned my registery (I used a downloaded registry cleaner from a computer magazine website, they reviewed it, and i tried it)Disk Defrag used.
Finally found some info when my computer crashed. Went online to find information and got some software that helped me get more info about my problems.

(see attachments)
screenshot1.txt

screenshot2.txt

screenshot3.txt
Some info:

Windows Vista 32bit Home Premium
1gig ram
(service pack 2)

I am not sure what forum to post this on to be honest. hoping this one is the correct one. If its not , I apologise.

I am not sure if I have given correct information or not - or enough. Please state if I need to give more info.

Thanks everyone for your time.

Sergeo

A:Blue Screen Crashes - Computer Freezes.

Follow these instructions, I will get you help. You will be up and running soon.

[1 - Novice] How to ask for help with a BSOD problem - Windows 7 Forums

20 more replies
Answer Match 69.72%

Hello, I do believe that this computer hasnt been updated for quite some time as this is still running XP SP2. The first thing I tried to do was update with Windows update but it stalls into blue screen after several minutes. I have run just about every scan i can on this machine and still cannot get it to respond back to normal. Zone alarm found the "not-a-virus" problem and deleted both instances. When I try and run Malwarebytes it stalls on file netapi32.dll every time whether in safe mode or not. This machine is pretty slow(I went through the processes) in the pre-read file on this site and to no avail. I notice every start the task bar comes up blue as it is supposed to but then turns the cream color. Here is the DDS log below. Any ideas? The other issue at bootup I get a generic host error with either netcfgx or netcfg error (not sure if this is due to the fact that the owners use DSL and my connection is Cable). Any ideas?DDS (Ver_09-06-26.01) - NTFSx86 Run by Lisa at 14:42:24.35 on Wed 07/22/2009Internet Explorer: 7.0.5730.11============== Pseudo HJT Report ===============uStart Page = hxxp://att.yahoo.comuSearchMigratedDefaultURL = hxxp://search.yahoo.com/search?p={searchTerms}&ei=utf-8&fr=b1ie7BHO: Yahoo! Toolbar Helper: {02478d38-c3f9-4efb-9b51-7695eca05670} - c:program filesyahoo!companioninstallscpn1yt.dllBHO: Adobe PDF Reader Link Helper: {06849e9f-c8d7-4d59-b87d-784b7d6be0b3} - c:program filescommon filesadobeacrobatact... Read more

A:Windows Update freezes to blue screen

Hello and welcome to Bleeping Computer.My name is Syler, I will be helping you to solve your Malware issues. Whilst I am helping you, I wouldbe grateful if you would note the following: Please do not run other tools or scans unless I ask you to and follow all the steps I give you, in order.
Copy and paste all logs requested in you reply, Do not attach them unless asked too.
If you don't know or understand something, please don't hesitate to say or ask before you proceed with my instructions.
Please continue to work with me, until I tell you your machine appears to be clean. Absence of symptoms does not mean that everything is clear.
If I do not hear back from you within 5 days of my last post, then this topic will be closed.Please download Malwarebytes' Anti-Malware from HereNote: If you already have Malwarebytes' Anti-Malware, just update then run it.Double Click mbam-setup.exe to install the application.Make sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.If an update is found, it will download and install the latest version.Once the program has loaded, select "Perform Full Scan", then click Scan (the scan may take some time to finish, so please be patient).When the scan is complete, click OK, then Show Results to view the results.Make sure that everything is checked, and click Remove Selected.When disinfection is completed, a log will open in Notepad and you may be p... Read more

2 more replies
Answer Match 69.72%

My wife's computer has been acting up the last 2 weeks, sometimes it just locks up, sometimes the monitor is covered in lines like the video card is shot, sometimes it gets the blue screen, getting frustrating.
Tried system restore but was no help.
Ran Malware Bytes, found lotsa things but still no help.

What should I try next?
Thanks in advance
 

A:Windows Freezes, locks up, blue screen etc

15 more replies
Answer Match 69.72%

For the past week, whenever I play any video game after so long it will freeze and give me a blue screen along with this error message:

Stop: 0x0000001E (0x10000005, 0xBC29D282, 0x00000001, 0x40858C41)

address BC29D282 base at BC132000, datestamp 42df2742 - nv4_disp.dll
beginning dump of physical memory physical memory dump complete. Contact your system administrator or technical support group.

any suggestions?
 

A:Computer freezes while gaming - Blue screen

Run a program called speedfan, and tell us what you temps are (all except temp 3) when you try to play a game. You could be having an overheating problem, or now that I think of it, a problem with your vid card. Please give us your system specifications so we can help you more. If your not sure what the specs are, google cpu-z and download it, run it, and it should tell you everything about your computer.
 

2 more replies
Answer Match 69.72%

Hello all,I have a pc since 2007 with the following characteristics:Processor - Intel Core 2 Quad Q6600 Box;Motherboard - Asus P5K Deluxe WiFi-APMem Ram- OCZ DDR2 4GB PC2-6400 Gold GX XTC 5-5-5-12Internal Harddrive - Seagate 500GB SATAII 16MBGraphics- Sapphire HD2900XT 512MBDVD/CD - LG DVD-RW GSA-H44N 18XTower - Thermaltake Soprano DX BlackPower Source - LC-Power 850W Arkangel V.2.2 140mmMonitor - Samsung 206BWSO - Windows 7 64bitsEarlier this year it started freezing when running new games and the fans made a lot of noise. After a while it started freezing all the time so I decided to clean it up. It had tons of dust that I removed and I even applied thermal paste MX3 to the processor. Everything went well for a few months but now the freezing has restarted. Basically, I turn it on and it freezes while doing small stuff like opening firefox or steam whithin a minutes. Normally the screen goes black but the lights in the tower stay on and the fans keep working. I have to manually reboot and then it just works normally with no more freezings. This is a temperature scan that I made just before one of the freezes:Sometimes a blue screen appears and the following error is issued:Assinatura do problema:Nome do Evento de Problema: BlueScreenVers?o do SO: 6.1.7601.2.1.0.768.3ID de Regi?o: 2070Informa??es adicionais sobre o problema:BCCode: 116BCP1: FFFFFA8003DF94E0BCP2: FFFFF88003A93408BCP3: 0000000000000000BCP4: 0000000000000002OS Version: 6_1_7601Service Pack: 1_0Product: 768_1I h... Read more

A:Computer freezes and sometimes the blue screen shows up!

We need to know more about your BSODs...Download BlueScreenView (in Zip file)No installation required.Unzip downloaded file and double click on BlueScreenView.exe file to run the program and When scanning is done, go to Edit > Select All.Then go to File > Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.Compliments of Broni

10 more replies
Answer Match 69.72%

Ok I'll be short and to the point. I was surfing the web, when all of a sudden, I hear the clicking noise that happens when you click a link. It occured rapidly for about 5-7 seconds. All of a sudden I got a error message saying Windows was going to shut down. I restart, then I get a blue screen upon logging into my Windows (XP, Home) acct. Now when I log in, Windows chugs, then it freezes, or I just get a blue screen. I can only work in safe mode (which is what Im doing now) and when I "google" or even "bing" something, I click on a link and get redirected to a totally different site. This happens randomly (sometimes it will take me to the correct site). Please someone help! I tried doing a system restore from safe mode, but when I click the "Next" button, nothing happens. It doesn't freeze, just nothing happens.
 

A:PC freezes, blue screen, search redirect

Hiya and welcome to Tech Support Guy

Are you still having this problem? If so, can you do the following:

Please download Malwarebytes' Anti-Malware from Here or

Here

Double Click mbam-setup.exe to install the application.
Make sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.
If an update is found, it will download and install the latest version.
Once the program has loaded, select "Perform Quick Scan", then click Scan.
The scan may take some time to finish,so please be patient.
When the scan is complete, click OK, then Show Results to view the results.
Make sure that everything is checked, and click Remove Selected.
When disinfection is completed, a log will open in Notepad and you may be prompted to Restart.(See Extra Note)
The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.
Copy&Paste the entire report in your next reply.
Extra Note:
If MBAM encounters a file that is difficult to remove,you will be presented with 1 of 2 prompts,click OK to either and let MBAM proceed

with the disinfection process,if asked to restart the computer,please do so immediatly.
Download and scan with SUPERAntiSpyware Free for Home Users
Double-

click SUPERAntiSpyware.exe and use the default settings for installation.
An icon will be created on your desktop. Double-click that icon to launch the program.
If asked to update the program definitions... Read more

1 more replies
Answer Match 69.72%

hi everyone out in the internet! i have a problem when listening to target christmas on my com, i run winXP home edition, what happens is i am listening to music like christmas lights synced to music, and then my com freezes and i get a blue screen.
Please post if you have any tips to keep it from happening

Thanks,
Dozernet

A:playing sound freezes then blue screen

What do you mean by "Target Christmas"?

2 more replies
Answer Match 69.72%

Hey all. I have problem, again.

While playing games my PC freezes, I get sound loop, PC restarts. However no blue screen occurs, it just restarts. Sometimes I can play forever and no bsod will occur, but sometimes bsod occurs after few minutes.

I've ran memtest86 for 16hours, no errors. Prime95, no errors. Cleared CMOS. Fresh windows install. Temperatures of CPU and GPU are normal.

My PC: Asrock P67 Fatal1ty
Intel i5 2500K
Corsair Vengeance 4x2GB
ATi HD 6850 Sapphire
SSD Samsung 830, 128gb
HDD WD Caviar Blue
Crosair TX650 v2

When I run Driver Verifier and select all drivers (expect Microsoft ones), pc crashes before boot logo loads (this time I get blue screen, but only says STOP: 0x0000001E (0xFFFFFFFFC0000005, 0xFFFFF80002E73736, 0x0000000000000000, 0x0000000000000000), nothing more) and doesn't create minidump. When I deselect all drivers and select only random ones (tried with several of them) windows loads, but when I log on to my account, pc freezes before it completely loads (this time, no blue screen occurs and minidump is not created).

Since crash dump mentions ATI driver, I reinstalled graphics driver, but BSOD still occurs.

A:PC Freezes, no blue screen, while playing games

Hello SoapyCro.

► Uninstall the programs:
Alcohol 120%
AsRock Utility
Catalyst Control Center.
► Then if it crashes again, Do it:
Download and install |MG| Driver Fusion (Driver Sweeper) 1.1.1 Download.
Reboot the computer in Advanced Boot Options, safe mode. Search Driver Fusion in your start menu, and remove all components of your nVidia display driver.
Boot normally now. Go to Drivers - Download NVIDIA Drivers, follow option two to search for the appropriate driver for your system automatically, and install it.
Let us know the situation.

9 more replies
Answer Match 69.72%

My windows 8.1 downloaded some automatic updates, and while installing, froze at 64%. (going on two hours). I tried turning off and turning on the wifi, as someone suggested. nothing. Any suggestions? This is a Dell Inspiron.

More replies
Answer Match 69.72%

Hi.
My system (win7 ultimate 64 bit - clean install) was running stable until a few months ago.
At almost every start in the morning it freezes og goes into Blue Screen (last time it said: DRIVER_IRQL_NOT_LESS_OR_EQUAL) just after load.
I usually keep restarting 3-10 times until it gets stable again and I can work on the machine the rest of the day. Can anyone help please by giving me advice on how to analyse on whates going wrong and how to fix this?
In advance: Thanks!

A:System freezes or goes into Blue Screen after load

Hi.

You dont have any nimidumps in your folders.

You must enable minidump Dump Files - Configure Windows to Create on BSOD

Wait for a new crash and reupload the crash\bsod folder.

7 more replies
Answer Match 69.72%

Whenever I try to start up my laptop, everything goes fine until the blue login screen. It just stops loading right before the WELCOME message replaces the Windows XP Logo.

I'm not sure if this is the cause but:
Before my computer started acting funny, I ran CWShredder. After it was done, whenever I double clicked Internet Explorer, instead of loading the browser window, a new shortcut to internet explorer (without the icon) would come up on the desktop. Then the recycle bin was moved to the very top left corner of the screen and two new folder icons appeared under it, but none of the three had any label under the picture. Then the original IE icon lost the words under it. I tried to restart, but nothing would happen when I clicked the button. So I tried to log off. Again, nothing happened. It wasn't like my computer was freezing up, there was just nothing happening when I would click something.

I tried to boot in safe mode, but the same thing happened. It stopped loading on the blue logon screen before the word WELCOME replaced the XP Logo.

What the HELL is going on, please somebody tell me how to fix this.

A:WinXP Freezes at Blue login screen

it could be a number of things, hard to diagnose if I dont see it in front of me. But at this point If u can get into ur operating system, msconfig it and get rid of any startup items, if u cant the best thing u can do at this point is a repair install.

If you have a dell/hp/etc.. type computer they give u a recovery disk, forget that crap.

Get hands on an OEM version of windows xp home or pro, and use the cd key sticker pasted on either the back/side/under the front panel of ur computer. I would recommend a format, but if u have vital data perform a repair install. After that, u will be able to get into ur computer. U can then go through and SHOULD do a proper virus scan/spyware clean. Again I recommend avg antivirus, asquared free, adaware, spybot, and windows defender. all free, all work superbly.

Honestly, if u have the means, after the repair install backup any vital docs/music/pics/movies etc.. (cant backup programs) and just format the computer.

3 more replies
Answer Match 69.72%

Please help! I don't understand why my new laptop is crashing so often. Four crashes today alone..

A:Windows crashes and freezes no blue screen

Hi,
You have memory corruption issue, it can be caused by bad RAM or 3rd party driver.
And I see you have old drivers that may cause the problem, so you must update it ASAP.

Code:
ghaio.sys Mon May 30 02:34:05 2005 --> ASUS NB Probe program
sncduvc.SYS Mon Dec 29 01:14:26 2008 --> Suyin USB 2.0 Webcam driver
Then if the problem persist, test your RAM with memtest86 for at least 7 passes(better do it overnight).
RAM - Test with Memtest86+

Log:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {fffff6fc4000dbc8, ffffffffc000000e, 13d82d860, fffff88001b79b14}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
GetPointerFromAddress: unable to read from fffff800032bc220
Probably caused by : memory_corruption

Followup: memory_corruption

1 more replies
Answer Match 69.72%

Hello.

I have just bought a new computer, think I bought it in August. And ever since then I have had some issues with the computer.

First it was that my SSD harddrive was dead. I called the company wich I bought the computer at and we figured it out then so I sent the SSD hard drive to them and got it replaced with a new.

Now I have sudden freezes, or the computer slows down and almost stops entirely for about 3-5 seconds before it goes back to normal. This may not happen at all for a couple of hours and then it also might happen 7 times in 30 minutes. So its completely random.
Ive scanned my computer multiple times and I have no viruses or spyware on my computer at all.

This is what I have on the last Bluescreen:

BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF800030A3408
BCP3: FFFFF88003153838
BCP4: FFFFF880031530A0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Anyone who can help me figure out acctually whats causing the problem?

I have also had some Video Card errors. Ive checked for updates and it says I have the most updated driver availible.
Problem Name: LiveKernelEvent
BCCode: 117
BCP1: FFFFFA8007BC9010
BCP2: FFFFF880131BA9C8
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
 

A:Sudden freezes and blue screen issues

Hey, what is the make/model of you're computer? Also if you could attach the minidumps it would help. To get the minidumps go to start>computer>local disk>windows>minidumps. The files in this folder will need to be compressed to be posted here, use 7-zip for this.
 

10 more replies
Answer Match 69.72%

I don't know what I installed or did wrong lately to have this blue screen to keep popping up when I open the computer. It happens randomly, but more frequent as of now. The blue screen says "Windows has come to a problem and shut down to prevent future damage to your computer," or something of that nature. Then it further goes into saying that I should check my computer if there's enough physical memory. I have a total of 70.3 GB total HD space, and 17.3 GB is free, how can it be the physical memory problem? I have 512 MB RAM, in which about 250-300 is free, and the remaining is usually running. The problem sometimes doesn't even pop up at startup, it sometimes pops up when I'm working on the computer. This error shutdown is sometimes accompanied by lagging, or is followed with multiple programs functionally at very slow rates.

What can be the problem and how can I fix/approach it?
 

A:Blue Screen at Startup

16 more replies
Answer Match 69.72%

Hi everybody, I generally experience this crash at morning when turning on , it's weird to occur only unplugging power supply after waiting 2 minutes repeated again. Anyway after rebooting 2 times loading os no problem untill unplugging powersupply. I'm sure that ram, hdd,cpu work fine , ı have suspects on mobo and graphic card. I reinstalled win7 but nothing had been changed and I swichted all usb devices to diffrent ports . I updated all drivers same situation.
I'm sorry for my poor English.

Thanks

OS - Windows 7
? x86 (32-bit)
? Wİn7 ultimate
? OS an OEM version
? 3 years old
? 15 days ago

? E2180
? 9800 gtx amp
? Gigabyte p35 ds3r
? Tagan 380 watt psu

?OEM PC

A:Blue screen on startup

Hello and welcome to TSF!

The driver is in the BSOD is a Nvidia driver... update your nvidia drivers from their website. If that doesn't work then download Driver Sweeper and go into Safe Mode with Networking... run Driver Sweeper and delete all Nvidia drivers you can find, restart in Safe Mode with Networking then install the latest Nvidia drivers again. Restart in normal Windows mode.

I have to say you power supply is not good enough for your video card and you should consider upgrading to a Corsair 650w.

17 more replies
Answer Match 69.72%

Blue screen during startup ... A problem has been detected and windows has been shut down ... DRIVER_IRQL_NOT_LESS_OR_EQUAL ... PRISMUSB.SYSMy wife's Dell Dimension 2400 desktop goes to a blue screen, either during the BIOS load or after generating the Windows XP desktop. If we shut it down and start again, in one to three tries, it will eventually boot up all the way and perform normally.The blue screen references a variable, DRIVER_IRQL_NOT_LESS_OR_EQUAL. It also references the driver file PRISMUSB.SYS, which is the driver to the D-Link USB wireless device installed on the computer. Contrary to the blue screen messaging, we can't think of anything that has been installed recently on the computer.After reading various posts on bleepingcomputer, I downloaded blue screen viewer. Here's the output:==================================================Dump File : Mini082610-02.dmpCrash Time : 8/26/2010 6:51:36 AMBug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUALBug Check Code : 0x100000d1Parameter 1 : 0x2cacb13cParameter 2 : 0x00000002Parameter 3 : 0x00000001Parameter 4 : 0xb0ceace9Caused By Driver : PRISMUSB.sysCaused By Address : PRISMUSB.sys+cce9File Description : PRISM Wireless NDIS 5.1 USB DriverProduct Name : PRISM Wireless LANCompany : Intersil Americas Inc.File Version : 3.00.04Processor : 32-bitComputer Name : Full Path : C:\WINDOWS\Minidump\Mini082610-02.dmpProcess... Read more

A:Blue screen during startup ...

Simple test.

Uninstall the device referenced, using Device Manager.

Reboot.

Do you still get the error? Did the device automatically reinstall?

Louis

9 more replies
Answer Match 69.72%

My friend has this problem, where whenever he boots up his computer, it comes to a blue screen. Some of the things it says is:

STOP: C0000218 {REGISTRY FILE FAILURE}
The registry cannot load the hive. (file:
\systemroot\system32\config\software
Or its log or alternate.
It is corrupt, absent, or not writable.

Beginning dump of physical memory:
Physical memory dump complete.
Contact your administrator technical support group
for further assistance.

Got any clues to what this is?
 

A:Blue screen upon startup?

1/Restart your PC

2/ Keep tapping the F8 Button until a menu appears

3/ When the menu appears use the UP and DOWN arrow keys to select the ‘Last known good configuration’ option.

4/ Once selected press Enter

5/ Your PC should now reinstall the ‘last know good configuration file’

6/ Restart your PC and see if the problem has been solved
 

1 more replies
Answer Match 69.72%

Whenever i startup my computer and i see the black windows screen and you can see it loading, after 10 seconds this BLUE screen comes up. I didn't install any new hardware. I have those 6 boot disks, but it says the second disk has a problem...this is the message, File \ntkrnlmp.exe could not be loaded. The error code is 7. Setup cannot continue. Press any key to exit.
The blue screen says.

A Problem has been detected and windows has been shutdown to prevent damage to your computer
UNMOUNTABLE_BOOT_VOLUME

IF this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

***

***STOP;0x000000ED(0x82AF1E30,0xC0000006,0x00000000,0x00000000

btw, im using a public computer

A:BLUE screen, can't even startup

Quote:




0x000000ED: UNMOUNTABLE_BOOT_VOLUME

The kernel mode I/O subsystem attempted to mount the boot volume and it failed. This error also might occur during an upgrade to Win XP on systems that use higher throughput ATA disks or controllers with incorrect cabling. In some cases, your system might appear to work normally after you restart.




http://aumha.org/win5/kbestop.php

This is almost always a problem with the hard drive ; either incorrect , loose or damaged cabling, or controllers or that you have the drive settings incorrect in the bios.

2 more replies
Answer Match 69.72%

I just got this brand new dell laptop, installed with vista home basic (ya not the best out there i know). It was working fine for the first week or 2, then after that i got an error. The BSoD. The very odd thing about this is that it does not happen too often, and only happens on ONE occasion. and thats in the log-in menu of the computer. I go to restart my computer, and everything boots up fine. BIOS, WIndows Vista, etc. Then it starts up the log-in screen, and for some reason, when i dont log in my user-name in a certain amount of time, the blue screen comes up and restarts my computer. Its very wierd. However, if i am able to log in quickly enough, everything boots up fine and the computer doesnt show any signs of problems. In short, this BSoD only occurs when i dont log-in my username, and just leave it in that uersname log-in menu for a certain amount of time.
I set the settings now so that whenever the BSoD comes up, it doesnt re-boot my laptop so i can take note of the information on it, and heres what it is:
STOP: OXOOOOOO8E (OxCOOOOOO5, Ox821E8760, Ox9827BCD8, OxOOOOOOOO)

i also went into problem reports and solutions and here is what they gave me:
Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.2
Locale ID: 1033

Files that help describe the problem (some files may no longer be available)
Mini101207-04.dmp
sysdata.xml
Version.txt

Extra information about the problem
BCCode: 1000008e
BCP1: C0000005
BCP2: 821E8760
BCP3: 9827BCD8
BCP... Read more

A:Blue Screen on Startup

6 more replies
Answer Match 69.72%

alrighty, so, a last week I turned the power off, turning off my computer, I don't do this often, but w/e....before that, I hadnt run any new programs or anything...

then, the next day I tried to turn it on, and a black screen came up saying blah blah blah and told me to pick an option if it said the power went out start windows normally, I did, then after that, a blue error screen came up telling me there was an error and to delete any new programs or whatever, and although I didnt I couldnt get past that screen..till ever...what should I do?

I can gve the exact error codes I have a dell dimension 3100 desktop, are there any backups or w/e I can use? I really dont care abot any of my files...im new to this type of stuff lol, thanks...

Any help means a lot to me, I know this is my only post but remember im a real person, so just dont close this thread or w/e if its in the wrong place move it, thanks again guys.
 

A:Blue Screen On Startup

The information you receive is in direct proportion tot he information you give:

"black screen came up saying blah blah blah..."
" a blue error screen came up telling me there was an error.."
" can gve the exact error codes..."
"remember im a real person..."- so are we and we're not mind readers.

Give us something to work with and maybe we can help.
 

5 more replies
Answer Match 69.72%

Hello,

The other day my computers screen randomly turned blue and my computer started to reboot itself over and over, only to get another blue screen and reboot itself again over and over.

Also, I can't access any commands because my keyboard won't work upon startup, it only starts to work once I'm in windows, which I can't access because my computer gets a blue screen every time. I have another keyboard (an older one), if I use this one will I be able to access the commands?

thankyou

A:Blue screen on startup

I'm not sure what kind of information you need, just ask and I'll try to get it for you.

3 more replies
Answer Match 69.72%

When I turn on my computer it shows a blue screen. At the bottom of the screen is a message that says" STOP: 0x00000067 (0c00000001, 0x00000009, 0xC0000035, 0x0000000) ". I've tried going into safe mode but every time I try my computer restarts. This started to happen after a windows update. I've also tried the startup repair several times, but it didnt work. Please help.

Also, I'm very bad with computers.

A:Blue screen upon startup.

Hi shelb105,

I would suggest trying a system restore point.. Or if comfortable with losing all data, restoring to factory condition. What you want to do is access your computer and find this folder:

C:\Windows\Minidump\

You must zip and post back those files.

1 more replies
Answer Match 69.72%

Hey guys.

This afternoon i DL the latest patch 3.3.5 for World of Warcraft, but when i started up the game it crashed and the whole computer with it.

When i turned on the computer again, right before the logon screen it showed blue screen saying that an error had been found and windows had been shut down to prevent damage. It has done this a couple of times before random (not associated with wow).

But now it keeps on doing it, right before the logon screen appears :O I tried starting it in safemode and uninstalled wow but it didnt solve the problem. Every third time or so, the logon screen appears and it starts up fine with no problems though, so it seems pretty random
I also tried running the startup repair tool, but it didnt work either.
Also sometimes the resolution gets messed up (set too 400*600 or something) when the logon screen finally appears after a couple of blue screens.

It came up with this:

"Problemsignatur:
Problem name: BlueScreen
OS-version: 6.1.7600.2.0.0.256.48
countrystandard-id: 1030

More information of the problem:
BCCode: 1a
BCP1: 00041284
BCP2: 05D51001
BCP3: 00000A83
BCP4: C0402000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files, helping describe the problem:
C:\Windows\Minidump\092110-24523-01.dmp
C:\Users\Niclas\AppData\Local\Temp\WER-38547-0.sysdata.xml"


I have had some problems with it overheating some times, could that have anything to do with it? maybe... Read more

A:Blue Screen at startup! :(

  
Quote: Originally Posted by Niclas1199


Hey guys.

This afternoon i DL the latest patch 3.3.5 for World of Warcraft, but when i started up the game it crashed and the whole computer with it.

When i turned on the computer again, right before the logon screen it showed blue screen saying that an error had been found and windows had been shut down to prevent damage. It has done this a couple of times before random (not associated with wow).

But now it keeps on doing it, right before the logon screen appears :O I tried starting it in safemode and uninstalled wow but it didnt solve the problem. Every third time or so, the logon screen appears and it starts up fine with no problems though, so it seems pretty random
I also tried running the startup repair tool, but it didnt work either.
Also sometimes the resolution gets messed up (set too 400*600 or something) when the logon screen finally appears after a couple of blue screens.

It came up with this:

"Problemsignatur:
Problem name: BlueScreen
OS-version: 6.1.7600.2.0.0.256.48
countrystandard-id: 1030

More information of the problem:
BCCode: 1a
BCP1: 00041284
BCP2: 05D51001
BCP3: 00000A83
BCP4: C0402000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files, helping describe the problem:
C:\Windows\Minidump\092110-24523-01.dmp
C:\Users\Niclas\AppData\Local\Temp\WER-38547-0.sysdata.xml"
I have had some problems ... Read more

3 more replies