Tech Problem Aggregator

# Need help with a project problem

Q: Need help with a project problem

Hi, im from Denmark so.. sorry for my horrible english.

First of all i need to provide you with some background information. what i am trying to do is, build a computer from scratch, using only secondhand trashed parts. in my town we have a recyceling site where people and companies trow away old computer systems and stuff. so me and a friend once a week go out and collect what we can.i finally collected enough parts that fit together. my problem is that when i put it all together, and install windows vista (i dont think the hardware supports windows 7, i might be wrong...) it worked some times (about half of the times i booted up it got through, i also had to try avout 10 time before i got the os installed corectly).i then proceded to install some motherboard and GPU drivers, i then restarted.

HERE IS MY PROBLEM:when i get to the login screen i get blue screen of death, and it says: "an error has been detected and windows has been shut down... bla bla" i have rebooted it 50 times, never always get to login screen, then it fails.

So i am trying to locate the problem, here is a list of the parts i have used:

antec true550P EPS12V PSU (almost 100% sure that there is nothing wrong with this part)

abit i-N73V motherboard (motherboard CPU and RAM all came from the same computer and was assembled when i found it

core 2 duo processor

3 GB kingston DDR2 800Mhz RAM

500GB hitachi Harddrive (there is nothing wrong with this harddrive)

ati Radeon 3870x2 GPU ( this graphic card also work perfectly, however i am not sure if any of the parts is compatible with the otherparts)

Any idear what the problem might be??since the parts are from a recycle site there is no garentee that they are working

i have run memtest86 and found 816 errors . does this mean my memmory is broken?

if yes:what memmory is broken, is it only the RAM or could it be something else?

if no:How do i fix these errors?

if i need to go out and buy new RAM, i am thinking... is it really worth it spending money on this project?the essence of it all is that the computer should be used for my litle brother to play minecraft on (also as a "test" bench, is it even going to be able to handle that if i get it fixed?

how do i procede from this?? any idears would be much apreciated

A: Need help with a project problem

Any errors in Memtest tells you the ram is bad are you running a single stick or multiple sticks?
If multiple have you tested the sticks one stick at a time?

5 more replies

Does anyone know how I can open a MS Project 2007 file in MS Project 2010. The file that was sent to me is .mpp and created in 2007 but I own 2010 and it says Project cannot open file.

A:Can't Open MS Project 2007 file in MS Project 2010

You will need to convert the file or it will be displayed in Compatibility Mode with reduced functionality. Then, you can resave the project as a 2010 format.

Opening Project MPP files from different versions

3 more replies

I have a user that has been using Project 2003 for several years. He last used one particular file in November, and now when he tries to open it he gets this error message:Project cannot open the file--check that the file name & Path are correct--check that the file format is recognized by projectIt is a .mpp file, and was created with and had all modifications done with project 2003. The only thing that has changed in the last several months is an upgrade from Win 2000 to Win XP pro.I have tried opening this file on other computers and I get the same error message. I have done a new/fresh install on a computer - same problemI have repaired and also removed/reinstalled - same prblem...Help....

A:Microsoft Project 2003 says Project cannot open the file

I do not use MS Project software, Have you installed Service Pack 3 for Project?See here:https://www.microsoft.com/en-us/dow...This site might also be of assistance:http://project.mvps.org/faqs.htmThis is the thread where I found the above link:https://answers.microsoft.com/en-us...MIKEhttp://www.skeptic.com/message edited by mmcconaghy

3 more replies

MS Project Server files are saved in Project 2007 format .mpp and then re-opened in MS Project 2010. When the file is opened in MS Project 2010 the progream switches to compatibility mode but there are no tasks or project details - it is a blank schedule. I can open the same file in MS Project 2007 at home, but cannot open it at work on my laptop in MS Project 2010 (opens but is blank).

Any ideas what the issue might be? Belwo are my laptop details.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel Pentium III Xeon processor, x86 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3535 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1024 Mb
Hard Drives: C: Total - 76316 MB, Free - 26108 MB;
Motherboard: Dell Inc., 0W612R
Antivirus: VirusScan Enterprise + AntiSpyware Enterprise, Updated: Yes, On-Demand Scanner: Enabled

A:Cannot see Project 2007 files in Project 2010

http://www.mpug.com/Pages/MPUGForums.aspx?action=ViewPosts&fid=7&tid=709

1 more replies

Hi there, I've got a mpp file from MS project 4, but project 2000 can't read it unless I convert the file to the mpx format. I don't have a version of Project 4 with me to do the conversion. How else can I read it?

Cheers,
Citifly

More replies

I've had this problem ever since I got my new Video card.
I start up Project 64 (N64 Emulator) and It says this.

So I click OK, and Then this Pops up.

But, my video Card is like this:
---------------
Display Devices
---------------
Card name: VisionTek XTASY 9600
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9600 Series AGP (0x4150)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4150&SUBSYS_7C201545&REV_00
Display Memory: 256.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6387 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 9/13/2003 00:43:24, 372736 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 9/13/2003 00:43:04, 611328 bytes
Device Identifier: {D7B71EE2-0210-11CF-066E-2A5CA1C2CB35}
Vendor ID: 0x1002
Device ID: 0x4150
SubSys ID: 0x7C201545
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=DeinterlaceTech_Pi... Read more

A:Project 64 Problem

Just a bump. I hope someone can help me

2 more replies

Trying to install Project 2000. Don’t have enough room on the C drive so want to put it on the D Drive. Install program insists on putting it in the C Drive, but says there’s not enough room. In the destination directory, it says the directory in D I want it, yet it still says not enough space on the highlighted drive. (C) This can’t all be stuff going into the Windows system directory can it? I’ve still got over 130 meg on the C drive.

Have Project 98 on the C but can’t remove it because it insists on having the install disk in order to remove it. My 98 disk is in a storage shed because of some major remodeling we’re doing so can’t even free that space off the C drive. Suggestions?

A:MS Project install problem

If you want to remove Project 98 from your C drive - right click the folder and change the file name then try to delete it. This has worked for me in the past but your registry will still retain the Project 98 info which could cause some problems.

2 more replies

After I upgraded my operating system to Windows 10, I have problems with my projection. If I project to second screen only then sound and video display well but if i should project either duplicate or extend then the sound or video will not work. This happens when I project wireless or through HDMI cable

More replies

When i try to open the edited Project file, the file opens, the the transitions are there, the clip size is correct but the clip image won't display. i think it has to do w/ the identification of the Project file directory but am not sure as most of the project file appears. M Leckey

More replies

I recently installed Project 2000 on a laptop running Win98 2nd ed. The rest of the MS Office suite is also installed on this machine. When Project is run the user is able to open and work on projects and save them but when shutting the program down he gets an error message that WINPROJ has performed an illegal operation...specifically an "invalid page fault in module MSVBM60.DLL"

I'd appreciate any input on how to resolve this issue. I tried uninstalling and reinstalling the program to no avail. Thanks in advance.

More replies

I just used a very old MS Project template and worked over 5 hours of getting a plan in placed. The project saved fine under 2000 but I can not open it in 2000. Of course I do not have a copy of 98 on hand.

Does anywone know of a way to convert this to 2000 without 98?

More replies

Hi folks,

I'm using MS Project 2003, and I'm having a couple of difficulties with the relationship between the calendar view and the gantt chart:

The calendar is placing some tasks on non-working days;

When I set up my project in MS Project, I specified working days to run from 8 a.m. to 4:30 p.m., however, when I view the project report it sees working days as running from 8 a.m. to 5 p.m.. This suggests to me that, somehow, the gantt chart and task list are not wedded firmly to the calendar view. Can someone help?;

MS Project is displaying some distinct tasks as separate tasks along the same Gantt Chart bar. For example, tasks, x, y, and z occur on Monday, Tuesday and Wednesday every month, and they are displayed in the Gantt Chart on the same line of the same month running in direct s... Read more

A:MS Project Calendar Problem

11 more replies

I have to create programmes for large scale civil engineering projects. This is not a problem However, we find more and more clients require a cost breakdown. Costing is carried out by a different person, but from this I can get a TOTAL cost for excavation, fill, etc- all the actual costs for an item.
The question is, can I use this overall number to calculate the cost of each item, and thus generate a costing plan? I want to be ablt to give a value to excavation, and then have project divide this up between all the excavation items- so if I have 10 excavation items of different times (the time is related to volume and thus represents a quantity as well), is there a way to get this done automatically? Typically I have over 300 tasks, sometimes 4 or 5 000, and its way too much work to go in and try to edit it all once the estimators have a value.

Seems I can do this, but helps are not a lot of good, and slightly better than our IT- who seem to think if its not word, Excel or email, it doesnt deserve help.
thanks

A:MS Project- resources problem

2 more replies

I recently tried to open a project file and I got the standard Microsoft error message "PS-3 has encountered a problem and must close...". I last used the project file in question almost two years ago with no noticeable problems. Any ideas on what I might try to salvage this file?

A:Photostory-3 project file problem

10 more replies

All,

I am seeing some strange issues in the MPP file that I am working on.

I am working on a MPP, which has the following line items as attached in the .jpg file.

1) My problem is with the task name "Req analysis". I expected the end date to be 6/1 and I do not understand why Microsoft project calculates it as 6/5.

2)Sometimes, when I select the work as 16 hours, the duration is not getting calculated as 2 days. It is calculated as 2.28, as if I had a 7 hr/day. But I confirmed I had a standard calendar with 8 hrs/day only.

sometimes, I see the resource usage sheet, if I go and modify the 7 hours as 8 hours, it shows as if it is an overallocated task.

Can someone explain the reason for this behavior and help me fix this problem.

THanks a tonn for your help.

Regards,
Sri.

More replies

OK, so, I'm in Computer Science (IT) so I have an entire course on how to use Microsoft Project 2007. They make us buy a little how-to book. I'm following that book as an homework.

So here is the problem. From the Resource Sheet, I choose a resource. Then, I go to Tools -> Change Working Time. I then click on the tab "Work Week". Then, I create a new exception for the resource. Then, in the boxes next to it, in the drop boxes, there's calendar to set when it begins and where it ends, right? Each time that I want to set the end day, Microsoft Project 2007 crashes automatically. It happens sometimes on the start day too.

Anyone can help with that?

P.S Word, Access, Excel and PowerPoint are installed too, but in French. Project 2007 is in English.

EDIT

Ah... Project doesn't like it when we select Januray 1st to December 31st when we are January 10...

More replies

Hello,

I'm stuck can anyone help? I have to present a Microsoft Project document to a funding group on Monday, regarding a project that has not yet started. It needs to have a fixed cost to support our claim with resources correctly allocated and in line with the overall budget. I have MS Project 'step by step' book (2003) and this version on my windows XP laptop. Having searched programme and book to no avail, and with no real person to ask for help I was wondering if someone out there could tell me where abouts to look, or if it is even possible?

Cheers,

Heather

A:Microsoft Project costs problem

Go to the MS news groups. There are groups dedicated to different MS apps
http://www.microsoft.com/communities/newsgroups/default.mspx

It is easier to use Outlook Express as a news reader as the HTML one is kink or crappy to navigate.

1 more replies

I found this forum because of this thread: http://forums.techguy.org/software-development/845981-solved-c-code-block-help.html

I assume that we are in the same class. I went about the project in a different way using fgets() instead of scanf() since scanf() would only accept a single word.

My problem is that when I enter my menu selection in, it is passing the \n into the respective while loops. At least I think that is happening. I have spent the last 4 days trying to figure out what is going on here and since the project is due tonight I got desperate and decided to ask for help here (I hope this isn't considered cheating!)

Can anyone spot where I'm going wrong? This is my final project and I've already dumped at least 20 hours into it at this point, so I appreciate any help.

Here is my code so far:

Code:

#include <stdio.h>
#include <string.h>
#include <ctype.h>

int main (void)
{
int MAX = 80;
char choice;
char input[MAX];
char output[MAX];
printf("Enter the operation of your choice:\n");
printf("u. Convert to uppercase l. convert to lowercase\n");
printf("a. append string b. print backwards\n");
printf("c. compare strings\n");
printf("q. quit\n");

while ((choice = getchar()) != 'q')
{
switch (choice)
{
case 'u' :
{
printf("Enter a string:\n");

A:fgets() problem in a C Programming project

7 more replies

I have a form that, when loaded, I want the primary key to populate right away. But the field shows (New) until the record is written to. How can I write a new record as the form is loaded? - rr

A:Access Data Project (.adp) Primary Key problem

7 more replies

I use windows XP Packard Bell Imedia 1508 intel pentium with extra ram and memory modem aztech realtek 8139 network card
I have been usung Windows microsoft dig image 2006 together with photo story I have made dozens of dvd videos with it , and now for no apparent reason it will not let me save the project I have assimilated, it will build the video no problem but not save the project whioch now makes it impossible to use. Have tried reinstallation reg cleaner, system restore just about everything I can think of any ideas please? I am working on some urgent
phtostories which I need to complete. Each time the error message shuts down the programme.

A:Solved: Problem with Photostory 3.1 saving a project

What's the error message?
How much HD space do you have left?

1 more replies

I downloaded and installed Photo Story 3. I have not yet been successful in saving a project. I get this message: "Some Photo Story program files may be corrupted. Reinstall Photo Story 3 for Windows and then edit and save your project again".

I have removed PS via the Control Panel, went back to Microsoft site and downloaded it again and reinstalled...several times. Get same message.

I did update the Windows Media Player from 9 to 11. My computer meets all the system requirements.

More replies

I have a user that is trying to save column widths and row heights. He can set everything how he wants it and save, but when he reopens it, though everything else is saved, the heights and widths are not saved.

Any ideas why this would happen?

Thanks!

A:MS Project Server Problem with saving column/row widths/heights

bump..........anyone?

1 more replies

I have an appliation that I want to modify so I can send an email from the application. It is a Visual Studio 2008 Smart Device Project. I'm using .NET framework 3.5 In the application, when I try to import System.Net.Mail and can not get it. I can import System.Net but there is no .Mail option. If anyone can tell me how to do this it would really help.

More replies

I use Windows system, and there is always mswmm file while using windows movie maker. Now I have found the result.

First, Know the MSWMM File
.MSWMM file is a Windows Movie Maker project file. By saving the project, it allows you to return to the movie and make modifications at a later time. However, if you're satisfied with the movie and would like to upload and share the result through YouTube, you will need to choose "Save Movie File" under the "File" menu (which is different from "Save Project", which creates the .MSWMM file).

Solution I: Save and Play the MSWMM File
You have to open the mswmm file in Windows Movie Maker and save the movie to your computer ( this step you should use Windows computer):
Go Finish Movie > Save to my computer

The 2 options for saving a video file from Movie Maker are either DV-AVI or WMV. To create a Mac-compatible video file, open the MSWMM file in Windows Movie Maker, save the movie at the highest quality setting WMV or preferably as a DV-AVI format file. Import this finished AVI or WMV file into iMovie or other Mac video editing application.
After the MSWMM file saving as AVI or WMV file in our PC, you can play the WMV/AVI files on your PC and convert them to another video format or burn to DVD.

Solution II: Edit and Burn MSWMM File to DVD on Mac
Talk of burning to DVD, if you are using Mac, how should we do?
First, make sure the MSWMM files had been saved as AVI or WMV format video on your PC, a... Read more

More replies

Hello,

When I try to install Microsoft Project I have this error:

Data Execution Prevention - Microsoft Windows
Name: Windows installer
Manufacturer: Microsoft Corporation

and I can´t go with installation. Any idea where is a problem ?

Regards,

Emil

A:Solved: Problem with installing Microsoft Project - Windows installer

6 more replies

I have a user that has been using Project 2003 for several years. He last used one particular file in November, and now when he tries to open it he gets this error message:
Project cannot open the file
--check that the file name & Path are correct
--check that the file format is recognized by project
it is a .mpp file, and was created with and had all modifications done with project 2007. The only thing that has changed in the last several months is an upgrade from Win7 Ultimate to Win7 Prof.
I have tried opening this file on other computers and I get the same error message.
I have done a new/fresh install on a computer - same problem
I have repaired and also removed/reinstalled - same problem.
...help....

A:Project 2007 says "Project cannot open the file"

If that doesn?t work you may want to consider a third part PP recovery tool PowerPoint Recovery Toolbox: https://www.oemailrecovery.com/powerpoint_recovery.html
As always, save a copy of the file as a backup before beginning procedures.

As always, save a copy of the file as a backup before beginning procedures.
See if the following article would help:
https://support.microsoft.com/en-us/kb/933960
https://social.technet.microsoft.com...eitproprevious

2 more replies

I have two laptops, and old one and a new one. Both are running Windows XP Professional and both have identical versions of Windows Movie Maker. The only difference I can think of is that one was upgraded to Windows XP Professional and the other came with it. I also have a Sony Digital 8 video camera.

I can capture & edit videos in the old computer, but that computer is not powerful enough to play them thru both its own screen and a projector at the same time. I work for a church and this is something we do frequently, so this is a necessary ability.

The church bought the new laptop to correct the projection problem. Now I can not capture the video correctly. I follow all the same steps and it appears to be going great. Then after it creates the clips, I go to play the clips so I can begin editing them and nothing happens. So, I end up creating the video in one laptop and then transferring the video to the other for the presentations.

I know there is the possibility that the problem is having a Sony camcorder, but I don't understand why creating the movie works in one computer and not the other. I've also looked into getting Sony software, but have had little luck in finding any info on it - the only thing I have seen is MovieShaker. According to the Sony Vaio people, that program may only work on a Sony computer.

I've been reading posts here and have seen some mention of Sony Vegas Movie Studio and am wondering if that will have the same proprietary... Read more

More replies

Tor Joins Movement Against Expanding Hacking Powers
messed up if you ask me

More replies

When I try to run MS Project I am getting message that the file MSPROJ10.mpp can not be read. Is this real, or it is protection?

More replies

I have to do a project for my computer literacy class, and it requires Windows XP. All that I have access to is Windows 7. Is there any way to get an interactive XP interface on my Windows 7 laptop?

A:help with project

If you have a spare copy of Windows XP and you can install virtual box and install it or upgrade to Windows 7 pro/ultimate and download the Windows XP Mode

9 more replies

Hi folks

I'm developing a project in C++ and I want to get the best performance possible. My software code should be platform independent, so I can run it in any OS. My knowledge about hardware is almost "null", so I came here to ask a newbie question
Today, I am compiling the project only for 32 bit machines, forcing the OS of 64 bit machines to translate the compiled instructions.

My question is: This approach I've chosen (compile only in 32 bit) impacts the performance negatively if I run it in a 64 bit machine? Is so, would it be slower than a 32 bit machine (completely equivalent machine, but 32 bit), or it would have the same speed?

A:32-bit vs 64-bit for C++ project

I really know almost nothing about this, so fools rush in. A 64 bit computer is a 32 bit computer until something tells it it isn't. So, many programs are 32 bit and a 64 bit deals with them as such. To the best of my very limited knowledge, you don't actually have to "force" a 64 bit machine to deal with 32 bit software, it does that natively.

As to speed of execution a 32 bit program would have slower execution speed than a 64 bit, all other things being equal.

With that said, probably a more important consideration is to write code that is capable of taking full advantage of the current crop of hyper threading and multi-core CPUs.

I think that multi-threading in a 32 bit program, would likely exceed single thread performance @ 64 bit.

1 more replies

Ok i started making a login form in visual basic
what my final goal is to make the user once logged in when they select what they are booting like on my login will have a box with three options to select while loggin in when they select a option it boots a certin .exe (my program)

Yet i know c++ but no vb and i dont know how to link usernames and passwords to my ftp like a txt file on my ftp also
i dont know how to link login button to log user in and the box which they select things i dont know how to tell it once they click a certin one and login correct to boot any .exe specifyed for that option they selected
Any Help With My Project would be gratfull

I have project file here ready if anyone can help me let me know will send it them

i am also willing to pay or donate for help on my project
Many Thanks
SkunkNation

A:need help with my project

This smells of Homework and non-googleness. What say you guys?

3 more replies

Can anyone tell me how do i save the game IGI.

I play it, i go ahead kill some dudes and then i die. So is there anyway i can save it where i was alive last?

A:Project IGI

From the Eidos website:

Unfortunately, IGI was designed so that you have to complete each level before the game saves automatically. There are no plans to patch or update the game.Click to expand...

1 more replies

ok my problem is more like this; i don't know what project to pursue since i am not very well exposed to the resources that are available to some of you out there. So if there is someone who has any computer engineering project which they can help me with by giving me access the resources available to them, please get to me through my yahoo account [e-mail address removed by Cookiegal]. you will find me quite cooperative and an exiting project partner;
thank you

A:help for project

6 more replies

I am getting Project 1 showing up in my applications. I also get a pop up that is a box that has a red circle with an x in it and an ok button. I try to close it and it just keeps coming back. Can some one look at the following log and give some suggestions. I have run spybot and adaware but I am still getting alot of pop ups

Thanks
Logfile of HijackThis v1.99.1
Scan saved at 10:48:36 PM, on 11/17/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.exe
C:\WINDOWS\services.exe
C:\Program Files\Yahoo!\browser\ybrwicon.exe
C:\Program Files\Viewpoint\Viewpoint Manager\ViewMgr_________.exe
C:\Program Files\Java\j2re1.4.2_06\bin\jusched.exe
C:\PROGRA~1\Yahoo!\browser\ycommon.exe
C:\Program Files\HP\HP Software Update\HPWuSchd.exe
C:\WINDOWS\AGRSMMSG.exe
C:\WINDOWS\System32\ezSP_Px.exe
C:\WINDOWS\System32\1es1ms9i.exe
C:\Program Files\Lfqhq\Ojvibdv.exe
C:\WINDOWS\System32\sdnzkfxpurl.exe
C:\WINDOWS\System32\a7abgd\zlip.exe
C:\WINDOWS\System32\nfomon\nfomon.exe
C:\WINDOWS\System32\vidmon\vidmon.exe
C:\WINDOWS\System32\MSED32.EXE
C:\Program Files\My Love\c4nn0t.exe

A:Project 1 etc

16 more replies

Does anyone know why project is splitting my programme, putting the last item onto a seperate page when printing? This is seriously doing my head in, so please help!

A:MS Project!!!

hi Willwalk,

What are you printing? Report, Gantt, filtered list.....

Is this just page setup setting, margin, page length....?

Have you got page breaks? (dotted line above the task that wouldn't be visible if you have filtered that task out!)

Hew

1 more replies

Well here is my log. I am infected with something called Project1 and I have no idea how to get rid of it. All these stupid little exe files are popping up everywhere and installing themselves and internet explorer keeps on closing etc If anyone can help me out it'd be much appreciatedLogfile of HijackThis v1.99.1Scan saved at 12:34:35 PM, on 10/4/2006Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\csrss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\brsvc01a.exeC:\WINDOWS\system32\LEXBCES.EXEC:\WINDOWS\system32\brss01a.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\system32\LEXPPS.EXEC:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exeC:\WINDOWS\system32\nvsvc32.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\wdfmgr.exeC:\WINDOWS\system32\ZoneLabs\vsmon.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\system32\... Read more

A:Project 1

1 more replies

My help file in XP is u/s and I would like to know the command string to export Gantt and Pert charts from

More replies

Everytime I start up my computer and log in to my user account an error message pops up that say "Can't load project XML" Does anyone know what that means and/or tell me how to make it go away?

A:Project XML

6 more replies

I'm fiddling with the idea of assembling a pc, I've personally never done it before but i'd like to try my hand at it. Looking to build something affordable but with an ok gaming performance. I'd love any input on hardware or hardware configurations, preferably considering relatively new hardware (mid 2009).

I've been looking at some motherboards, cpu's, cases, memory, etc., but I'm having some trouble. Any and all help are appreciated. Thnx

A:New project

9 more replies

Hello I am having problems with the base calendar. Everytime i enter the working times and the days people have off. I loose everything when i save and close the project file. The settings are still there when the project file is open but when i close and save it loses all the base calender settings.

Thankyou
djrock

More replies

hi ,

i have just finished my basic C course which includes pointers ,arrays, functions , structures , loops , basics function.

I m requried to make a project , and I have run out of ideas on wat to do , my class mates have done programs like factorial,prmie no. ,trigonmetric stuff , expontentinal , fibbonaccy series, matrices are all take, and i don't have any idea , so can u suggest me something within the scope of my knowledge on a good C project , i just need a idea on wat to do

A:I need a C project

try looking here for tons of ideas
http://acm.uva.es/problemset (click on one of the volumes, there are 1~8)
from the examples you said your friends did, I think any of these will do, but beware, some are much easier than others.

1 more replies

hi guys,
can anyone suggest me some good project using c++.
tried to search on the net but no luck.
could anyone suggest some sites where to look for?
thnx

A:C++ Project

_____________________________________________

+"C++" +"code" +"beginner"

exactly as shown (including the quotes).
That should get ya started.

Cheers, Mac

1 more replies
Q: project

: User Authentication using mobile over GPRS
Network

: The Project will allows an authorized user to log into the
system with his mobile .The technology that will be used is
GPRS (General Packet Radio Service) and Bluetooth. Since
GPRS technology will be used, Remote Login will bepossible.
from a nearby location.

: The mobile that will be used for login will have an
application running on it. This application will be
developed using J2ME technology. The application will
unique serial key of that mobile phone that will be extracted
by the application. The application will be able to send data
over GPRS or Bluetooth.

At the other side there will be an application running on the
system. When system boots up, it will be the first
application to run waiting passively for username and
password from the authorized mobile. Once the data is
verified the session will begin and acknowledgement will
be sent to the mobile.
: 1) Mobile with GPRS feature, Bluetooth.
2) GPRS modem for PC.
3) Linux platform.
4) J2ME Development Kit
: 1) Nigel Coutinho.
2) Siddesh Gawas.
3)Kaushik Velingkar
5)Nagraj Sunkeri.
Can anybody suggest me what to do please i have very less time to complete my project

A:project

1 more replies

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:26:58 PM, on 5/14/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Nero\Nero8\Nero BackItUp\NBService.exe
C:\Program Files\Norton AntiVirus\IWP\NPFMntor.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\RTHDCPL.EXE
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\WINDOWS\system32\igfxsrvc.exe

A:project.exe

2 more replies

Noticed I had gotten Project 1 virus after homepage became a chinese site. Ran AVG and then that isolated Project 1. But chinese site kept returning as homepage. Then did a system restore and that fixed the homepage issue. Also before I did a system restore, Itunes kept popping up at startup up also until I did a system restore. Now itunes wont run--it says I need to reinstall.

I did all the steps suggested. I do have service pack 2,IE7, but cannot access windowsupdate page.

Log will be in next post.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2:22:28 PM, on 9/27/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\SYSTEM32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Yapta\YaptaClient.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Messenger\MSMSGS.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Common Files\DataViz\DvzIncMsgr.exe
C:\Program Files\Palm\Hotsync.exe

A:Project 1

Hello and welcome to TSF.

Apologies for the long delay in response. We have a large number of HijackThis logs to handle and it?s taking us longer to catch up. If you haven?t received help elsewhere already and still require assistance please perform the following:Download RSIT by random/random and save it to your desktop.
Double click RSIT.exe to start the tool and click Continue at the disclaimer.
When the scan completes it will open a log named log.txt maximized, and a log named info.txt minimized.
Copy (Ctrl+A then Ctrl+C) and paste (Ctrl+V) the contents of both here.

Please note that the forum is very busy and if I don?t hear from you in three days this thread will be closed.

2 more replies

Okay. So I have a desktop, and no matter the screen, there is a red tint over the picture and lines running from side to side. I know that I could just go out and buy a graphics card, but I am trying to fix the problem without buying a graphics card. I have no use for the computer other than to maybe find a cheap life hack sort of ordeal. Any suggestions?

Notes/ I have tried:

Different cords
Different screens
A graphics card(it worked, but as I said I wish to find another way)
Applying thermal paste to the gpu
When the computer is on the gpu does not get too hot
Installed new drivers
Installed different OS

A:Project GPU

Unless baking the card helps, I believe you have hit a brick wall.

3 more replies

Hey guys,

I have someone that would like to put something from Project into a PowerPoint presentation. I am unfamiliar with Project, so bare with me. In pProject, they have text on the left with charts on the right. We are only able to select the text. How can we select the charts too, and just paste into PowerPoint? Is this even possible. If it matters, we are using Win98se.

Thanks,

p51

A:MS Project 2K

I'm not familiar with Projects either but have you tried to import or export the file into PP?

2 more replies

DOES ANYONE KNOW IF YOU CAN EMAIL A PROJECT FILE TO A PERSON WHO DOES NOT HAVE PROJECT? AS A VIEWER OR SOMETIHNG?

THANKS

A:Project 98

Have been looking for a viewer for Project 98 and haven't been able to find one. Can you save the output in another format like word or HTML. If they onlt need to read it, it shouldn't make any difference.

1 more replies

I was given access to MS Project professional under the condition I wont use the software at work and that I will uninstall the software at the end of the semester. Will Microsoft know if I dont remove the application from my computer. It is the full version. Can I keep the software on my computer forever

A:MS Project

I was given access to MS Project professional under the condition I wont use the software at work and that I will uninstall the software at the end of the semester. Will Microsoft know if I dont remove the application from my computer. It is the full version. Can I keep the software on my computer forever

2 more replies

i have made project on web designing in asp.net.i have attached the database to it. but i am running it ,it's showing an error.

<---error--->
Login failed for user 'ZENITH\Admin'. body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;} p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px} H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon } pre {font-family:"Lucida Console";font-size: .9em} .marker {font-weight: bold; color: black;text-decoration: none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Source Error:

Line 29: Line 30: con = new SqlConnection(System.Configuration.ConfigurationSettings.AppSettings ["constr"]); Line 31: con.Open(); Line 32: cmd = new SqlCommand("Select * from puser_registration where uid='" + txtuser.Text + "&#... Read more

A:asp.net project

6 more replies

Logfile of HijackThis v1.99.1
Scan saved at 8:06:43 PM, on 1/21/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltsmon.exe
C:\WINDOWS\system32\drivers\KodakCCS.exe
C:\WINDOWS\system32\pctspk.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\HPZipm12.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\Common Files\AOL\1147668717\ee\AOLSoftware.exe
C:\PROGRA~1\COMMON~1\AOL\AOLSPY~1\AOLSP Scheduler.exe
C:\Program Files\Real\RealPlayer\RealPlay.exe
C:\WINDOWS\system32\spool\drivers\w32x86\3\hpztsb10.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\Program Files\Java\jre1.5.0_09\bin\jusched.exe
C:\Program Files\Messenger\msmsgs.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\system32\wuauclt.exe
C:\WINDOWS\system32\WgaTray.exe
C:\Program Files\Java\jre1.5.0_09\bin\jucheck.exe
C:\PROGRA~1\Yahoo!\MESSEN~1\YAHOOM~1.EXE
C:\Program Files\MySpace\IM\MySpaceIM.exe
C:\PROGRA~1\Yahoo!\MESSEN~1\YServer.exe
C:\Program Files\Netscape\Netscape\Netscp.exe
C:\Program Files\Internet Explorer\iexplore.exe

A:Ok, new project...Help...here's my log.

Logfile of HijackThis v1.99.1
Scan saved at 8:06:43 PM, on 1/21/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltsmon.exe
C:\WINDOWS\system32\drivers\KodakCCS.exe
C:\WINDOWS\system32\pctspk.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\HPZipm12.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\Common Files\AOL\1147668717\ee\AOLSoftware.exe
C:\PROGRA~1\COMMON~1\AOL\AOLSPY~1\AOLSP Scheduler.exe
C:\Program Files\Real\RealPlayer\RealPlay.exe
C:\WINDOWS\system32\spool\drivers\w32x86\3\hpztsb10.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\Program Files\Java\jre1.5.0_09\bin\jusched.exe
C:\Program Files\Messenger\msmsgs.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\system32\wuauclt.exe
C:\WINDOWS\system32\WgaTray.exe
C:\Program Files\Java\jre1.5.0_09\bin\jucheck.exe
C:\PROGRA~1\Yahoo!\MESSEN~1\YAHOOM~1.EXE
C:\Program Files\MySpace\IM\MySpaceIM.exe
C:\PROGRA~1\Yahoo!\MESSEN~1\YServer.exe
C:\Program Files\Netscape\Netscape\Netscp.exe
C:\Program Files\Internet Explorer\iexplore.exe

1 more replies

Dear Sir,

I have recently installed a new game on my Dell laptop( Project IGI). When I try to run this game an fatal error message comes up reading

" NO D3D DRIVERS with hardware acceleration found". Can you advise on this problem or can you advise on who else can help.

My system

Pentium 2 350mhz
windows 98
Neomagic MagicMedia 256AV (NMG5)
Neomagic MagicWave 3DX sound system

The game requires direct 7.0A 3D accclerated video card.
Many thanks

KC

A:Project IGI

Go to Start, Run and type dxdiag and hit OK. Then just go through the Direct X Diagnostics. Just keep hitting "Next Page" and it will go through the various diagnostics. Also, make sure you've downloaded the most recent DirectX.

1 more replies

if anyone is willing to offer me advice i would appreciate it, its alot to read but just lookin for any help

Project Overview

A college administrator is planning a new campus and intends to build a network in the new facility that will provide students both high availability and ample bandwidth, but at the least cost.

The administrator realizes that he will need expert advice in designing the network, and has asked your instructor to recruit the best networking students to assist. Your instructor has decided to allow students to compete for the honor of designing the campus network.

You will utilize your knowledge of networking principles to plan and design the new campus network.

Your plan should include, but not be limited to the following issues:

* What type(s) of cable to use and where to use them.
* What LAN topology to use.
* What networking devices to install and where they will be installed.
* How to segment the network to achieve optimum performance.
* Provide an average bandwidth of 4 Mb per user.

Research Supplement

In order to recommend a design that is aligned with the real-world requirements and evidences a cost effective solution to business needs, prepare a report that lists the features and prices of equipment (hubs, switches, routers, etc.) that you have considered for your plan. Your plan should analyze these competing features and prices and offer justification for your recommendations of equipment.

A:got a project need help

Sorry, we cannot help w/ homework assignments/ projects.

This forum is for helping users with Microsoft Windows 7 or Vista issues.

Good Luck to you.

jcgriff2

.

1 more replies

Hi all,

I've got a task from my teacher. We're working on an C#.NET application that makes it possible to send free SMS through a gateway. I found an information and a gateway on that page (ozekisms.com/index.php?owpn=315) that seems to be working for as the engine. Here a C#.NET SMS demo project is provided with full source code. Do you have any suggestions to my project? Any useful idea?

Many Thanks

Sam

A:help me in my C# project

What exactly are you looking for? It appears you have an assignment as well as a good API to use... Where do you need help?

3 more replies

I have done alot of searching and have not found what I need so far. I am wanting to build from scratch a new computer. I will most likely use alot of my of hardware that is case, memory, dvd burner and video card for the newer system. I need help picking out a case, mother board, and cpu and maybe anything that will help the new items.
I really don't do any gaming at all. I mainly surf the internet, burn dvd and watch dvd, and do alot of stuff with the digital camera. I want the system to be upgradeable in the years to come and I want a stable system. Does anyone have any suggestions?

I can wait a bit if pricing are getting ready to drop on certain models.

A:help with new project.

8 more replies

When my first computer broke (few years ago) I didn't know enough about them to even consider fixing it.

I held onto it, thinking "someday I'd like to find out what's wrong".

Not sure I'm at that stage yet and I don't have anything to test with, but it's still sitting here, waiting for me to heal it.

It's a Pro-Tech, Pentium(1) 32 MB RAM (said at the time I got it "expandable to 128) with 3 gb hd. Actually it now has a 10 gb hd in someone once gave me, thinking that might have been the problem. But, putting in the (new) hd, didn't work.

I tried starting it with a bootup disk (not really knowing how to do it, but knew I put the floppy in and turned it on) and nothing happened.

The hd doesn't "load" (or whatever) Doesn't make the sounds where it comes to life and lights up the screen.

Though the lights come on the pc front. And the fans run.

I haven't tried it lately, but that's how I remember it. It reminds me of a t.v.- the older ones that had the high voltage tubes. Sometimes they'd go, and the t.v. would light up (low voltage) but not the high voltage that started the picture tube.

Anyway, for the last few months I was using it, it would sometimes (but not always) go off when it dialed up.

It would start, come on, I'd start the dial up, and just as it connected it would flash (yellow light) go off and restart.

Sometimes it would do this over and over till it finally co... Read more

A:Another possible project

13 more replies

Hi
am kullslym and I need help with my final year project work. Am asked to build an electronic attendance register system for schools,churches etc, and I just don't know how. Can anyone help?.

A:Project help

Please don't get offended, but this is suspect. If this is your final year project and you have absolutely no idea where to start...there's a problem. Anyway, we aren't supposed to help with homework so I recommend contacting your professor.

3 more replies

Ok,

Here is the situation. My plant manager came to me with a MS Project file that wouldn't open in our MS Project 2002. I started looking into the file and it dates back to 1994. I think the version used to create this was Microsoft Project 4.x.(unsure this is just from research on the web). After reading you can't open these old of files with 98 or above. I was hoping someone may know a way to open this file just so we can view it and print it. Converting it to a newer file would be a plus but not needed. I hope I have provided enough information.

Thanks,

A:MS Project Help

Double check that their is not a converter for the older versions of Microsoft Project on Microsoft's website.

1 more replies

hi there..

i have a project which deals with image processing, that is, i have to use a webcamera for capturing an image to be processed...

i have a webcamera now but it's only 430K pixels..
and the image taken is very blurred that it's impossible to recognize an object..

my questions are:

* Does my videocard has something to do with the quality of the image i get in the webcam?

* and lastly how can i view the specs about my current videocard.. and i've heard that it could be built-in or slot thing(i forgot how to call it)..

A:For my project..

it has nothing to do with the graphics card, you just have a bad webcam

2 more replies

plz anyone can give me any idea for new software for college project...
recently i m working on e-payment... but the Paytm release that update last week..
now m blank.. not getting new idea.. plz can anyone help. regarding this i would be very thank full to him...

More replies

Hello everyone! I'm making a bot program that talks to you and stuff, and I'm having a bit of trouble when it comes to upgrading it to VB.Net.

This is what I need help fixing:

Select Case strName
Case "Name1"
Me.ForeColor = System.Drawing.Color.Red
Print("Hey, Name1, what's up?, ", strName, ".")
Print("How old are you?")
Case "Name2"
Me.ForeColor = System.Drawing.Color.Blue
Print("Hi Name2, this is a program)
Print("Now enter another name so I can show you what else I can do.")

More replies

Hi all,
Just bought this game s/h and have found quite a few annoying things..
Two of them are:
1. How do I change the key settings ? The defaults are all listed, but cannot find how the change the keys to suit me. No mouse pointer, and the 'arrow' keys only work on the menu, not the default keys listed. Stumped
2. There doesn't appear to be a gun sight, so how the heck do I aim my weapon accurately ? (apart from the sniper rifle.......zoom works ok on that)
It is early days, but can't seem to find the answers to these at the moment..........is it me ????
Apart from not being able to make a 'save' during the game, which is something else that annoys me it doesn't seem too bad once I get the hang of it......
Anyone got/played this game who can help me out with some tips ??
Many thanks all.

A:Project I.G.I. queries

Update.
Problem sorted.
Game won't run unless I use nvidia drivers v23.11's on my GF2 Ultra 64MB card.
Any others of 2,3 or 4 series and there is no mouse cursor for changing the menu or cross hairs for the weapons.
So, that's that then.......

1 more replies

I have been working on a VB 6 (SP6) project as part of learning the program. Today I tried to open the proect to work on it but when I open the project in the project explorer and then double click on the project name, it does not open any further to give me access to the forms.

I opened the folder with the project and I find 3 files. filename.vbp, filename.vbw and filename.frm

I tried the same with some other projects I have and they all opened fine.

Is there a way I can rebuild this project so I don't loose eveything. I tried to open the backup of the same project and it fails as well.

D.

A:VB 6 Project won't open

6 more replies

**note**
This was posted on another forum, but no one seemed to reply. So I moved , i'll just repost the posts I posed on that forum. ​
I work at an organisation called ROM Group, I work in the It department.

I have been asked to come up with a way of alerting people when we need to shut down the server(s), there are departments all over England connecting with a WAN.

All the computers have Windowns XP with service pack 2 and are all up to date when it comes to Microsoft updates. The servers run Server 2003 service pack 2 and are also up to date with the Microsoft updates.

My initial thoguhts went to entsend as it is already there inWindows XP and just needs turning on in the services. I have been told that Windows firewall blocks netsend. And I was wondering if you guys could give me some advice on certain ports that need opening. Or alternative (licenced) applications I could use.

Just some general help would be nice.I would like to set up a good reliable system for an eme3rgancy. This project will earn me points on geting the job as I am on my probation period. Thank you very much. And sorry if I missed anything relevent.

A:NETSEND Project

13 more replies

My problem is that i need to downgrade a visual basic . net 2005 project to a visual basic 2003 project. This is for the sole reason of submission in college as the *** holes replaced vb 2005 with vb 2003 and now to recreate the project is almost impossible as the submission is in 2 days. If anyone can show me an alternate way to downgrade as soon as possibe it would make my job easier. I really need to know if there is a way.
I did find a converter on the net but it was for c - sharp projects so i failed there

Any help will be the most appreciated thank you guys please dont dissapoint at least not now.

6 more replies

I plan to demote an existing Win server 2k3 from DC and DNS server to just a file server, and then promote another server to DC. I want to keep all individual office desktops intact and retain access to old files on the old server and local machines.

My plan is to demote the current DC, and then put the new Server 2k3 machine on the network and promote it to DC. While all this demoting and promoting is happeneing, should I leave the rest of the network connected? I mean, should the rest of the hosts currently connected to the network stay connected, or should I unplug the other computers?

I intend to configure the new DC with the same domain name. In order to retain individual users desktops, how should I join their machines to the new domain?

Thanks for any suggestions,
Steph
IT Intern

A:Server project

7 more replies

I'm bout to have 4 computers networked in my friend's business. He would like to setup these computers on an hourly rate.

He mentioned that some other PC room businesses give you some kind of an account card w/ a certain balance and gets deducted as time goes by.

Anyone can give me a link where I can find this type of hardware ?

In the meanwhile, I'll keep looking around.

thanks

A:special project ..need help

Never used any of these but here's what I found:
http://www.cafetime.com/
http://www.soft411.com/software/internet-usage.html

Hope it helps....

2 more replies

How do you insert dependences in Microsoft Project without changing the finish dates?

How would you put it if you say for example that "find similar football coaches" is dependent on "sending an e-mail to coach" finishing first?

More replies

HI there..
I don't have a sound in my computer.. I was not in need of this till now...
I need to study immediately from my classes.. And there is some programs and explanation that I need the speakers to be working ASAP..
So please any generous soul that would help me would be highly appreciated.

Characteristics:
1.- when I go to control panel to " sound and audio device" on the volume section it says.. " No audio device", even thought the speakers are connected.and the colors are faded...as well as the speakers settings ( Can't use it). I try with other speakers..They are plug and play. right?

2.- Everything else when I troubleshoot says it's working properly

3.-In "Volume control" is set to the top. " Mute all" sign in unchecked

4.- On the device manager everything" seems "to be ok

Somehow it makes me feel so stupid..

Thank you so much for reading.. I really need some help right away for my school ( I can't study for some very specific and big project!)..

A:I need help with the speakers right now for a big project.. PLEASE

13 more replies

hello guys im having problems with my project in computer programming if any of you could help it would be appreciatedim gonna post my code and where im hung up next but here is the assignment::

http://130.70.82.204:8081/150website/fall04/programming/pa9.pdf

A:Solved: C++ project help

#include <iostream>
#include <iomanip>
#include <string>
#include <cmath>
#include <fstream>
#include <cctype>
#include <cstdlib>
using namespace std;

{
string name;
double weight;
int score;
};
int const PAMAX = 10;
int const LABMAX = 15;
int const TESTMAX = 3;

void OpenInputFile(ifstream&, string);
int main()
{
int choice, size;
ifstream inFile;
string filename;

cout<<" " <<endl;
cout<<"********************************"<<endl;
cout<<"2. Display written test average"<<endl;
cout<<"3. Display pragramming assignment average"<<endl;
cout<<"4. Display lab assignment average"<<endl;
cout<<"5. Display overall average"<<endl;
cout<<"6. Quit"<<endl;
cout<<"********************************"<<endl;
cout<<" "<<endl;
cout<<"Please enter a selection : ";
cin>>choice;

switch(choice)
{
case 1:
filename = "pa8Scores.in";
OpenInputFile(inFile, filename);

3 more replies

My computer, at every start up, will contain a file called project 1. I will resort to the Ctrl-Alt-Delete to end the use of that file, however, upon start up the next time I turn my computer on, it is there. Also, when I access my home page (Google) the internet seems to run fine, however, when I search google or go to another website, a popup comes up and my whole internet freezes where I will once again have to resort to Ctrl-Alt-Delete. Please help me remove project 1 and these popups, thanks!

A:Solved: Project 1

11 more replies

So now i'm trying to fix another computer and it's not going so great. It's getting ''A disk read error has occured
Press Ctrl, Alt, Del to restart"

I've tried using windows 7 discs to reinstall windows, only to get stuck at this http://img297.imageshack.us/img297/3697/backgroundcli.jpg

Not exactly sure what to do at this point. Any help is greatly appreciated.

System specs for the mentioned pc (Well at least what BIOS tells me, if any of it is unnecessary I apologize.):

Notebook Model: Presario CQ61 Notebook PC
Systems Board ID: 363F
Processor Type: AMD Athlon II Dual-Core M300
Processor speed: 2000MHz
Total Memory: 3072 MB
BIOS Version: F.07
BIOS Vendor: Insyde
Factory Installed OS: Win 7

I think that's all that's actually important.

A:Alright new project.

Can you see the HDD in BIOS?

Where did the Windows 7 DVD come from?

Is BIOS firing order set to read DVD 1st?

Regards. . .

jcgriff2

12 more replies

My notebook Hp -ac002TU, serial number 5CG60957LMI just instal with windows 8.1 (64-bit), the problem is it cannot project to another screen. There is no option to duplicate, or project only, etc. There is no grapic option if right click on dekstop. please help me!!  In my device menager, display adapter is Microsoft basic display adapter ...

A:Cannot project to another screen

Hi, First, make sure to install the Chipset driver on the link below. http://ftp.hp.com/pub/softpaq/sp71001-71500/sp71340.exe When the installation has completed, restart the notebook. When windows has reloaded, try installing the Intel gpu driver package on the following link. http://ftp.hp.com/pub/softpaq/sp71001-71500/sp71341.exe Regards, DP-K

1 more replies

Can I convert an MS project timeline to an adobe pdf file? If so, how do I do it. Thanks

A:Help with MS Project and Acrobat

1 more replies

Hi,

I am doing A Level ICT at 6th Form. I have chosen to create a quotation for a printing company as a minor project. The project needs to be able to create a quotation from the requirement's inputted.

I am have become stuck in the design stage and could do with a few pointers if anyone could suggest some.

Obviously there are many different products in the printing industry and each product vary's.

I proposed to make this through look up tables but would this work?, if not does anyone know how i could make this?

Many Thanks

Alex

A:Excel Project

16 more replies

Hi Team,
I want to make a two way sms gateway software in .Net.
But I don't know the software compatibility of the Server system.
The client side they are using windows xp and windows 7.But the server and the database details are here.
Database: Oracle 9i
Server:Windows server 2003 SP1.

Which is the best option to start my project? Visual basic 6 or .Net?

More replies

I've decided to make a PC for me to put Linux onto from second hand parts. I can reuse hard drives (IDE) and a case that are knocking about, so really all I need is mb, cpu, ram, psu, heatsink and fan.

All is straight forward, but given a total budget of around £150 or so, what chipset / MB / CPU combo would you recommend?

It's going to be on 24/7 (so a new quiet PSU will be a must) and act as, amongst other things, a vnc repeater, a bittorrent downloader, a rudimentary nas device, a basic web server and an IMAP mail filterer running. It'll need to run a gui (albeit over vnc) as my linux isn't up to command line only yet.

Ideas...

A:My Linux Project

Hmm... If you're going for cheap, then I'd suggest a celeron d or a pentium (maybe pentium d) procesor with plenty of RAM (1-2g) since you mentioned server on the list... I don't know about video card.. If you're not doing gaming on that machine, you'll only need the basic (64-128m)... Can't suggest much else... Good luck.

2 more replies

Hello and thanks for looking at my problem,

Firstly I have no experience in this area so any and all help is greatly appreciated!

I have acquired a computer because it wont function properly,the power light flickers on then off constantly. I managed to get it to charge the battery and constantly supply power to find out the login screen passes (keyboard and mouse both working) uninterrupted but once it boots into the xp interface the mouse still functions but seems to have no purpose as icons and the start menu freeze.

I have loaded it through safe mode only to encounter a new hardware wizard before running out of patience and ideas.

Can anyone provide any ideas or insight?

It's a hp pavilion zd8000 running XP - service pack 2.

A:My summer project

If the computer will boot into Safe Mode and run without any issues, then you most likely have some corrupt files or drivers. You can check the Event Viewer to see if Windows is logging any errors.

5 more replies

Heres the deal, I have and unencrypted wireless linksys internet system in my house. The connection is shared by 2 computers and a playstation 2. Even though they are sharing a connectoin, I do not know how to make the pcs actually networked to eachother so they can trade files directly.

I want to be able to share files from pc to pc, I want to have my network encrytped, and I want to change linksys stupid default login/pass. Please Help me.

A:Networking project...

Ok, I suppose I didnt give enough details. please let me know what information you need to help me. Thanks!

1 more replies

HI,
i am a student and is new to this site.I would like to know any good projects using J2EE.

More replies

Hello all you great Tech people

I picked up this unit for next to nothing, my goal is to clean it up and give it to my Sister as a starter so she can learn compters and the internet.
I know someone might say trash the darn thing, but i think its a good little unit to learn on.
Spec's are: Compaq Presario, AMD-K6 (tm) 3D processor,345 MHz,128 RAM,XP Pro service P-1
What i have done so far is deleted cookies,temp internet files, old files and folders from previous owners, removed programs for games they loaded, downloaded AVG Free and Ad-aware 2007, SpyBot S&D
Isues are so far,,slow at start up loading ( i assume loading back ground programs) AVG found 77 threats that it deleted all trogans,Ad-aware found 120 threat and i havent even run spybot yet.
Does anyone feel they would like to help? Make suggestions on what should be done to clean it up ? ( other than trashing it )
I will attach the hijack scan for viewing

A:Learning Project

13 more replies

I am trying to install MS Project 98 on a Windows ME machine, but I keep getting a message stating that there is insufficient disk space available. There is over 16 Gig free on the machine. Any ideas why I get this message?

Thanks,

Matt

More replies

When trying to use Inspiron 5421 with projector, I recv error mssg: "your PC can't project to another screen. Try re-installing the driver or use another videocard."
Drivers are updated.  Had previously worked with same projector prior to Windows 8.1 update.
Has anyone else experienced this?  How did you resolve it?

A:PC can't project to another screen

Same here. Any suggestions?

1 more replies

I have a user who is trying to send emails to other users through MS Project 2003, but the fields that he used in Project 2000 have changed in 2003, and he needs to know how to change the form that he's using so he can use the new Project.

Any ideas on how to do this?

A:Issues with MS Project

6 more replies

Hello all,

I'm putting together a schedule with MS Project and am required to show the "Total Slack" column.

The column displays the value as eg. 2.38d, does anyone know if there is a setting to reduce the decimal places?

Chapsta

More replies

Help to

More replies

Hi everyone,

I'm a third year student studying "Computer Networks Security". This year i will be having individual project related to our course. It will be network design with security features inside so i would be incredible grateful if you could kindly help
me with some ideas related to cyber security. For example, basics like firewall, IPS/IDS, Cisco Routers/Switches protection (optimal configuration),WLAN networks with security features and so on.

Many Thanks!!!

More replies

I have received an email with a Microsoft Project Version 98 Attachment. I do have Microsoft 98 installed on my computer.
When I launch the attachment, there is no data in the file. Project comes up as it is opening a project, but it is all blank as if I just started a new project. I tried to detach and open it from my drive and I get the same thing.
I also went back to previous attachments that I had been able to open before and they are also blank.

Any ideas????

A:Project 98 Attachments

Problem solved by re-installing program. Closing post at user's request.

1 more replies

hi,
I tried to install IGI 2 from cds but i couldnt & the setup wasn't complete.
It hung at a stage & i removed the cd & installation was incomplete.
so i deleted the installed folder & uninstalled some files through your uninstaller!

But now when i try to install it with another setup, it says

Previous version detected.Please uninstall it first

the game perfectly worked in my friends com & i dont have doubt on the setup file.
i guess i need to delete some registry keys.

what shall i do????
Plzzzz anyone help or recommend a software....

More replies

Hello guys,
I need some help. I am student of MSCS, i have to make my final project. I want to make an online project.Please tell me which kind of project, i should develop.
I have time of round about 5 months.
I know html and asp languages, and corel draw, photoshop, flash tools.
I need some ideas.
good ideas will be appreciated.

PUNJABIAN263

A:final project

11 more replies