Tech Problem Aggregator

ZXC not working on HP Probook 645-G1

Q: ZXC not working on HP Probook 645-G1

I have a strange problem.When i start the Laptop and go into the Bios all the keys are working just fine.When Windows is started the Z,X,C and ENTER keys are not working anymore. The following has been done already: 1. Cleaning laptop (incl. the inside, fans etc.....)2. Keyboard has been replaced.3. Heatsink has been replaced.4. Motherboard has been replaced.5. Reinstall the drivers6. completely re-install the business image. But with no result. Do you have any other suggestions? Kind Regards, Arthur de BoomField Service EngineerHPCDS the Netherlands

More replies
Answer Match 49.56%

Hello, My HP Probook 450 is with Windows 7 and the combination FN + F9/F10 is not working. The other FN keys seem to be in order, but I can't change the brightness of the desktop directly with the FN keys. Can you please help me fix this problem?











Solved!
View Solution.

A:Probook 450 fn + brightness not working

Did you just install Windows 7 on it or had the brightness key been working and just stopped? The brightness adjustment depends on the video driver and also on the Hotkey Support driver here: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4058%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken So I would reinstall the Intel chipset driver, the video (AMD or Intel) and the Hotkey driver and see if it clears up the problem. If this is "the Answer" please click "Accept as Solution" to help others find it. 

7 more replies
Answer Match 49.56%

I use my ProBook to display to a projector on a weekly basis using a VGA cable. This week the VGA cable stopped giving a signal. I assumed it was the cable as everything has been working fine recently. I then tested the cable with an ASUS netbook, and that worked with the Projector - so identified that the laptop is at fault. I then checked with another HP ProBook 450 G2 which also did not give an output through the VGA port but did so previously. This would lead me to assume that something recently has changed with the units - likely to be an update of some description. The VGA was working fine up until the 7th May 2016 - but stopped at some point after this date. The following updates have been automatically installed since the last known working date: Update for Windows 10 Version 1511 for x64-based Systems (KB3152599) - Installed on 12/05/2016Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3156421) - Installed on 11/05/2016Windows Malicious Software Removal Tool for Windows 8, 8.1, 10 and Windows Server 2012, 2012 R2 x64 Edition - May 2016 (KB890830) - Installed on 11/05/2016Security Update for Adobe Flash Player for Windows 10 Version 1511 for x64-based Systems (KB3157993) - Installed on 11/05/2016Realtek driver update for HP Universal Camera Driver - Installed on 09/05/2016 Does anyone have any advice on what could be the cause for the VGA no longer outputting a display? I cannot even manually output using WIN+P.

More replies
Answer Match 49.56%

Hi  I have a HP Probook which is less than 4 weeks old. The enter key suddelnly stopped working today. However what I have noticed is that this is only affected in excel. I am running on Excel 2016. In word or outlook it is fine. I have not done any installations today or changed any settings. How do I correct this in excel? ThanksMichelle     











Solved!
View Solution.

A:Enter key not working on HP Probook

apologise- resolved myself in the advance settings. Thanks

2 more replies
Answer Match 49.56%

Hi there!I?m trying to configure Wake On LAN on a laptop ProBook 640 G1 but it isn?t working I?ve configured the BIOS settings and also tried different WOL magic packet tools with no luck. I?ve already updated BIOS to last available version. Also tried different BIOS settings but it?s just not working.I?ve read different posts with some advices (like configuring options at Windows drivers, also putting my laptop in sleep mode, checking available sleep modes with POWERCFG command) but still I can?t get it to work.I?ve tested my network using a utility to check if my laptop is receiving the magic packet and network is fine.I?ve already working with Wake On LAN feature in another HP laptop and there it?s working fine. The problem is with this new model (I have 2 new laptops and it isn?t working in any of them).Hope someone can help me.Thank you in advance!











Solved!
View Solution.

A:Wake On Lan not working ProBook 640

Hi there! I've solved my problem. The origin of the problem is the way Windows 8 turns off your machine. If I run the command "shutdown -s" at CMD then I can start my computer with WOL magic packet. But if I use the shutdown option with the mouse, then I can't. I had to disable the Hybrid Boot in my Windows so this isn't a problem anymore. I found there's a command to do this: "bcdedit /set disabledynamictick yes"Now it's working fine. 

4 more replies
Answer Match 49.56%

My right hand shift key has stopped working and instead jumps the computer to a new windows tab.  I transcribe for a living, so this is incredibly disruptive.  I have spent hours looking for an answer on the net.  Please help urgently.

More replies
Answer Match 49.56%

I recently purchased HP Probook 450 Go and after installing all the listed drivers on hp website, function keys for brightness[fn+f9 and fn+f10] are not working, rest every driver and button is working. The Laptop was shipped with Windows 8.1 and I got it updated to Windows 10, 12 hours ago.But neither in Windows 8.1 not Windows 10 the buttons worked. I searched lots of HP forum but no solution worked..... Please Help!!!

More replies
Answer Match 49.56%

Just purchased several 450 G2's. None will connect to our TV via HDMI. All of the Dell's we have work with no problem on the same TV. Intel 10.18.10.3995 driver is installed.  Tried clone and extended via windows. Cannot detect the TV. Any help will be appreciated!

A:HDMI not working on Probook 450 G2

@Thepearl? Press fn+f4 to alternate the computer screen image between 4 display states:? PC screen only: View the screen image on the computer only.? Duplicate: View the screen image simultaneously on both the computer and externaldevice.? Extend: View the screen image extended across both the computer and external device.? Second screen only: View the screen image on the external device only.Each time you press fn+f4, the display state changes. NOTE: For best results, especially if you choose the "Extend" option, adjust the screen resolution ofthe external device, as follows. Select Start > Control Panel > Appearance and Personalization.Under Display, select Adjust screen resolution.  To configure HDMI audio, first connect an audio or video device, such as a high-definition TV, to theHDMI port on your computer. Then configure the default audio playback device as follows: 1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then clickPlayback devices. 2. On the Playback tab, click either Digital Output or Digital Output Device (HDMI). 3. Click Set Default, and then click OK. To return audio to the computer speakers, follow these steps: 1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then clickPlayback devices. 2. On the Playback tab, click Speakers. 3. Click Set Default, and then click OK. REO

1 more replies
Answer Match 49.14%

I use this method to watch movies from my computer on my T.V. through services online. Now all it says when I connect it is no signal. The t.v. is brand new so I knew that wasn't the problem. So I bought a new DVI cable, still no signal. I can only be the port. Is there any way to reset or repair this problem

A:My DVI port just stopped working on my HP probook. It used t...

Does your computer have any other video ports? If not, you could try a usb graphics card.

1 more replies
Answer Match 49.14%

Hi everyone, hope u'll be fine.. i bought new laptop hp probook 450 g3 last week.. but i m facing problem form 1st day.. The problem is my lappie fingerrpint reader/sensor not working . I update all drivers from hp site but fingerprint reader still not working.. if anyone know how to fix this problem kindly help me out of this problm please.. regards,awais











Solved!
View Solution.

A:hp probook 450 g3 fingerprint reader not working

@Muhammad-Awais? When you say not working. Do mean it will not scan??? Does it show in Security Settings??? REO

5 more replies
Answer Match 49.14%

wifi button not working in Hp probook 6450borange lightwhen click in the button nothing happenthe driver is installed correctlyi 've dowloaded HP wireless support but isn't working in my computer model

More replies
Answer Match 49.14%

I have been using this laptop for a few years with no problems. This morning the keyboard suddenly stopped working. The touchpad is fine.I have tried a few ways to get the keboard to work, such as: 1) take out battery for a few minutes & put it back- does not work.2) hard reset- take ouit battery & everything else. Press & hold power button for 30 seconds. Then put back battery-does not work.3) uninstall keyboard driver & reinstall the driver again-does not work Is there any other ways that can be sucessful deploy to overcome this problem? Thanks in advance.

More replies
Answer Match 49.14%

I have a used HP ProBook 6550b laptop.  The built-in web cam is not working at all.  I can use the built-in microphone with no problem, but when I try to look for the webcam in Devices and Printers it doesn't show up.  I downloaded and installed the latest driver from the web site, but no luck there either. My OS is as follows: Windows 7 Professional (x64) Is it a driver issue, or something else?

More replies
Answer Match 49.14%

I have a used HP ProBook 6550b laptop.  The built-in web cam is not working at all.  I can use the built-in microphone with no problem, but when I try to look for the webcam in Devices and Printers it doesn't show up.  I downloaded and installed the latest driver from the web site, but no luck there either. My OS is as follows: Windows 7 Professional (x64) Is it a driver issue, or something else?

More replies
Answer Match 49.14%

I have reinstalled windows 7 64 bit and all relevant softpaqs but still can't get brightness hot keys to work all other hot keys work.  I have tried older versions of the  hot software and older versions of intel graphics driver. Any help would be appreciated. Thanks Matt

A:Brightness hot keys not working on ProBook 650 G2

@DaBanker? http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=8430741&swItemId=ob_169839_1&swEnvOid=405...  Fixes an issue where the microphone mute and screen brightness buttons do not function properly when Device Manager is running. REO

2 more replies
Answer Match 49.14%

I have installed HP hotkey support on our new model of laptop (Probook 650G2). But it does not adjuct the brightnessvia the FN keys. We are using Windows 7 Enterprise. I have tried different versions of the hotkey support software but still wont work. The volume keys work fine. All the drivers are upto date with HP support assistant. 

More replies
Answer Match 48.3%

Hello, Neither my windows, nor any apps (like Skype, e.g.) can detect my built-in webcam. Pre-history: I upgraded from win 7 to win 10, installed skype but found skype can't see my webcam. Then I looked in the device manager - there was no imaging devices at all. I then downloaded and installed the webcam driver (HP Webcam Software (International), SP52437) from HP website and hooray - the webcam started to work (skype could see it) and I could take images. The next day after win 10 update the webcam stopped working again. Itried to re-nstall the same driver (SP52437) but during installation it said "Setup has determined that your configuration does not support any of the included products" I found on the web that lots of people who upgraded to win 10 having issues with their built-in webcam not working. So I rolled back to win 7 but the camera isn't working again! In my control panel I do see Imaging devices and a driver 'USB2.0 UVC 1M HD WebCam' with a yellow exclamation mark, but when I try to update the driver the system fails to find a newer version and the exclamation mark remains. I also tried installing another generic driver for HP website - 'HP universal camera driver" (SP47460), but to no avail. I spent a week searching web for solution but couldn't find one that would work. Please help me to make my webcam work! Thank you very much!!!

A:Built-in webcam not working in Probook 6550b

Hi Velant You may have hit the the same problem I had when I upgraded my HP Pavillion x2 10 from Win 8.1 to Win 10 and after many months of trying to get my camera to work I eventually did. I have posted some of my story in the post under the link I have give below. I hope it works for you. I am sorry but I cannot find how to provide a link to my post but I have copied it below. Also note my post is dated 18/7/2016 and currently is about 5 below yours. The clue is in "Fast Startup" and that needs to be switched off. Best wishes.  http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/Webcam-did-not-work/td-p/569393...

9 more replies
Answer Match 48.3%

My HP Probook 4530s working very slow .When i tried to open my computer or any drive or folder or   watch any movie or work on MS office or browing on internet, it is working very slow.Due to this problem I formated my C drive and installed the another windows ultimate but problem not resolved and also free the space in the hard drive but problem is still.Pls help me regarding this issue.

A:Laptop Probook 4530s working very slow

For Windows 8 Operating system:http://support.hp.com/us-en/document/c03340676 For Windows 7 Operating System:http://windows.microsoft.com/en-in/windows/improve-computers-performance#1TC=windows-7 Hope this helps, for any further queries reply to the post and feel free to join us again "I work for Hewlett-Packard" * * * * * Click the "Purple Thumbs Up Icon in the lower right corner of a post" to say thanks * * * * * * * * * * Please mark Accept As Solution if it solves your problem * * * * * Regards,K N R K

6 more replies
Answer Match 48.3%

I have a ProBook 430 G1 H6P58EA and an older Philips TV (http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?slg=en&scy=mx&ctn=26PF3321/12). I can't get a signal on the TV when connecting the laptop via HDMI. I am sure I used the right port (there is only one), and I updated my drivers. Using the same TV and HDMI cable and a different laptop (tried both Windows 7 and Windows 10) works effortlessly. I have previously connected my laptop to other devices via HDMI successfully, but I have updated from Windows 8.1 to Windows 10 since. However, the connection to the Philips TV did not work before the update, either. What else can I try?

More replies
Answer Match 48.3%

I (and others in office) have problem that headset plugged in docking station is not working.ProBook 650 has 1 jack (for mic and earphones together) on right side, and on docking there are separate jacks for mic and earphones which I am trying to use. When I plug in mic to docking station device /control panel/sound/recording/line in change status from "Currently unavailable" to "default device"Earphones plugged in docking are working but mic I am not able to start.I went trough all steps here  http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=5405400&docId=emr_na-c04474731&docLocale... and all seems OK.Mic on other PC is working great so there is no problem.OS is Win 7 Ent SP1. Headset is HP 642738-001.I hope that someone can help me.

A:ProBook 650 Line IN on docking station is not working

To add more info.I also tried with my PC on other docking station and behavior is same.So it should be problem with my PC.

3 more replies
Answer Match 48.3%

hi my two finger scrolling is not working . I have updated the drivers (installed sp 70198). also , still it is not working.  When i go to control panel-> mouse, it displays " unable to connect to the synaptic pointing device driver". What should i do? Earlier one finger scrolling was working(using right edge of touchpad), but after installing the driver , it is also not working. Other function of touch pad working properly. This problem occured 10 months ago alo, but the customer care help me resolved that. I m using cracked window 8.1 . Plz helpthanx

More replies
Answer Match 48.3%

Hello,I have win 8.1 64bit installed on my notebook and it crashes suddenly and a blue window comes up saying "sorry your window crashed" and it restart my computer. I'm facing this problem since the first day i bought my notebook and installed windows in it and it happened like 5-6 times. It happens randomly whenever i'm working or using internet.Please tell me what i should do, is it a software or hardware problem. Thanks.

More replies
Answer Match 48.3%

I just bought HP Probook 4530s Ci5Ram 6 GbHard 740 Gb1 Gb graphic card RadeonOperating system win7 64bit I downloaded the driver software and digital persona software from HP website, the device manager of my system is showing that the driver is installed correctly (Named as Biometric devices, and under it Validity sensor, its version listed is VFS471). But on windows log on it is showing detecting reader, and then reader is not detected. Same is happening in the software (Digital persona). I tried different softwares from different websites.  Please tell if you know something NEW. I said something new because I saw many people on many websites looking for that problem. But the problem is there. When I run the setup of Validity sensor driver, it install fine.Then I run the latest Digital persona software it says on its installation ("The system cannot verify that the fingerprint readers is installed"). And under it here is a option to SKIP that part. When I do it, it completes the installation and restarts the computer. After that same problem "Reader not detected" on windows log on.











Solved!
View Solution.

A:HP Probook 4530s fingerprint reader not working.

Hi,Uninstall driver and software for fingerpint reader. Resource:Uninstalling Software in Windows 7Uninstall or change a program in Windows 7 Download and install Validity Fingerprint Driver from here.Download and install HP ProtectTools Security Manager from here (inside this package there is software for fingerprint reader).Restart system and check the results.

10 more replies
Answer Match 48.3%

HiI used external monitor for months and yesterday when I tried to reconnect it, something go wrong.Monitor is detected, it is listed in Catalyst Control Center but monitor shows "No Signal" message.I tried monitor on different PC and it works.Behavior is same under openSuse Linux and Windows 7 so this issue is not due driver problems.I tried to reset BIOS, also tried to hold down power button for 30s without any power source. No effect.I tried to update BIOS but it is already latest version.Is this hardware issue? What else can I do to resolve this issue.Thanks

A:ProBook 455 G1 - VGA output suddenly stopped working

Exact same problem. No idea why its stopped working. Same laptop too. Running windows 7 Pro.

3 more replies
Answer Match 48.3%

So, randomly one day, I turned on my laptop and couldn't log in, because a lot of my keys weren't working. The keys are:  4, 7, =, q, w, e, r, u, i, o, p, [, a, s, d, k, l, ;, and some other keys like delete.  I've tried setting bios settings to default, tried updating bios to the latest. Tried the "removing the battery" trick, tried removing hp support assistance, tried uninstalling keyboards (including hidden) via device manager, and tried installing pretty much every driver on the HP website.  USB keyboard works, but it's not an ideal fix. Would really appreciate any help that can be offered please.  Thank you!

More replies
Answer Match 48.3%

My laptop keyboard is not working right. While I type, many keys do not respond, I have to press them repeatedly to get them to work. If I hold anything down it only will give one letter, not multiple like normal.

A:Probook 4530s keyboard not working properly

I have also been experiencing this issue - since I bought the machine!  HP please respond!!!  We need to know what is going wrong - why the keys aren't consistently responding...

9 more replies
Answer Match 48.3%

Just got a new Probook 4540s and cannot get the on/off function of the touchpad to work.  There is a small dot in the upper left corner of tochpad.  User guide says to double tap it to turn on and off touchpad.  Doesn't work.  I then went to driver download and got the latest synaptics drivers.  Still doesn't work.  What am I doing wrong?

A:Touchpad on/off button not working - probook 4540s

FIgured it out.  I had disabled the "touch to click" function.  After I enabled it the touchpad on/off button worked as it should.

2 more replies
Answer Match 48.3%

I am unable to use my laptop's touchpad and keyboard. Even my mouse is operational only when the windows is loaded. Meaning, during the booting time when i wish to change the booting option, at that time i am unable to use even my mouse. Which otherwise is the only outside device used via usb port. Earlier there was issue of BIOS application, which was corrupted, which not is visible when i just boot, meaning thereby, the button namely f1 or f8 is operation at the time of booting, but unable to do any change in the booting options which are visible when i just boot my laptop. Though with the help of USB i am able to work on my externally attached keyboard. What should be done to cure this issue this is persistently bothering me for last 15 days. I am unable to make my laptop's touchpad and keyboard operational. 1 thing more only Tab is operational and opening and closing bracket keys work that is it. And as i said now only f1 or f8 works during the booting, nothing else. Please get me out of this trouble. I've trying for many days. But unable to get rid of this issue.

More replies
Answer Match 47.88%

The touchpad and left-click were working previously, then suddenly stopped. I have changed the touchpad board and it worked, then it stopped working again. I have formatted windows.please, any help.

More replies
Answer Match 47.88%

Recently i have changed the internet coonection and after that the  I am unable to access wifi in my laptop HP ProBook 4440S.OS in the system is Windo 8 and 64Bit.  I tried to upgrade the WIFI device driver software but no result. 

More replies
Answer Match 47.88%

Hello,I am having an issue with my Probook 450 g3 running windows 10 pro x64 anniversary update v1607.Most of the time, the audio doesn't work. When its not working, it says that there is no playback device found in control panel --> sounds.I have updated the machine with the latest drivers and bios and it still does not work.However, if I uninstall the synaptics touchpad drivers and reboot, the speakers work fine. Unfortuantely, windows will automatically install a driver for the touchpad and it wants me to restart. The next time I restart, the speakers break again. I have disabled the setting to automatically install drivers in advanced system settings, and it still installs the drivers. Some info:Conexant ISST audio driver version: 9.0.72.50Synaptics ps/2 port touchpad driver version: 19.0.19.48Bios version: 1.14 Please let me know if you need any other details.Thanks,bench

More replies
Answer Match 47.88%

I've upgraded my laptop to Windows 10 and was hoping to use Cotrana, that's when I realised that the microphone's not working. I've tried some of the drivers suggested in the forums but they haven't worked. Any ideas?

More replies
Answer Match 47.88%

My HP Probook 4540S webcam has stopped working after Windows 10 update KB3194496 was installed. I installed the HPUniversal camera Driver but the webcam still doesn't work. Prior to the KB3194496 update the webcam worked perfectly. Has any else experienced this and is there a fix?! Thanks!!

More replies
Answer Match 47.46%

Hi Bought an old laptop from work and it lasted a good year but out of no where there was a loud buzzing and the laptop just turned off. Since then the display won't turn on and the caps light is blinking 4 times, which I read somewhere meant that the Graphics controller is not functional. How can I fix this? Thanks.

More replies
Answer Match 33.18%

I have product key of only 20 letters, why is this soAnd how can I get original product key

A:Probook 450 g2

@Humza100? You can try this very nice (free) tool to show the key and a great deal of additional information:Belarc Adviser The report outputs to your system and you can save it as an .html file. Open the saved file and search for "key" The line including the key should also include your system name / full Operating System. Example: Microsoft - Internet Explorer00123-40047-12345-AAOEM (Key: CNX7R-6KL3SA-D87CX-Y9J72-8CC7P)e    Microsoft - Windows 8.1 Professional (x64)00123-40047-12345-AAOEM (Key: CNX7R-6KL3SA-D87CX-Y9J72-8CC7P)e When you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Answers. 

1 more replies
Answer Match 33.18%

It was a great evening, watching a movie on my hp probook 450 G3 laptop. it warned of low battery-7% low, so i did plug it in and minutes later it just blacked. first ,i removed the battery, put it back and pluged it inot a power source but the light that indicates that it is charging didnt show till after some minutes but later after some minutes, it went off. the following day i did try putting it to direct power without the battery in and still it could not power on. Later on i did get a friends battery of the same everything, put it in mine and it powered on, did try his charger in my PC and it could charge...what could be the problem? For till now, i am still using the friends charger and battery while my charger and battery are working in his Pc!!! Help. Thanks.

More replies
Answer Match 33.18%

Please help to reset the password on the BIOS. HP ProBook 470 G0

More replies
Answer Match 33.18%

I need driver for my notebook HP ProBook 450g for PCI Simple communication controller.2. Where I find Com1 setting in device manager?

A:HP ProBook

Hi: There are 4 generations of Probook 450's...G0, G1, G2, G3...so I can't give you the exact driver link. For the  PCI Simple communication controller, go to your notebook's support page, download and install the Intel Management Engine Interface driver. Unfortunately, I don't know the answer to your other question. 

1 more replies
Answer Match 33.18%

I have HP Probook 450 G3 (P5S63EA) and I see that it has an empty M.2 slot.I want to buy for my laptop M.2 SSD and chose several models.Here is Samsung EVO 850 M.2 (MZ-N5E250BW) 250 GB, interface Sata 3, format M.2, memory type TLC 3D V-NANDand  Samsung MZHPV256HDGL-00000 (SM951) 240GB, interface PCIe x4, format M.2, memory type MLC. I read all available technical documentation for my laptop and see that only Sata 3 interface SSDs from HP are for my laptop. What about PCIe x4 in M.2 format? WIll it works on this laptop?Of course PCIe SSDs has very very faster read/write speed! I would prefer to PCIe ssd from Samsung.I read on this forum that other people used Samsung 850 Pro with MLC 3D V-NAND for this laptop as well. But nothing about PCIe x4.Of course Samsung EVO 850 M.2 (about i wrote upper) should works great because in using sata 3 interface in m.2 format. But what about PCIe x4?  Thanks !

A:HP Probook 450 G3 m.2 ssd

and small adtition.I found in this thread http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/HP-EliteBook-840-G3-with-SAMSUN... information about using samsung 950pro (which uses PCIe x4 interface) leads to a long boot time and information about non-compatible samsung's firmware with HP laptops.May be some HP professionals could give me advice in it?

1 more replies
Answer Match 33.18%

I have the ProBook 650 it has 2 usb-3 ports.Is there a way that I can make these ports run like usb-2?The reason, I have a program that uses usb for uploading but doesn't work with the high speed of usb-3.

More replies
Answer Match 33.18%

Hello, we have 20 of the new Probook 11 G2 min laptops (11.6"). An inserted HDMI cable is not always recognised by the system, or not at all. The sound output plays static (1 sec) before a sound with latest driver. This is Windows 10. We are hoping for a BIOS update to fix the HDMI problem? Thanks.

More replies
Answer Match 33.18%

Hi, I am trying to insert my micro sim card into the port on side and i managed to get it right, but it does not pick up or read the sim card. I have tried the sim card on different notebooks and it works,  and have tried on the same model on other users notebook and it does not read so am i missing something?  Please help!!!

A:HP Probook 650 g2

@Natz7? Is the Card Reader checked in the BIOS???  REO

1 more replies
Answer Match 33.18%

Good morning, I'm findig an 8 gb memory upgrade for Probook 450 G4 but i don't found the correct Hp part code, anyone can help me?thank al lot! 

A:Probook 450 G4

Pippopotamo Hello;Allow me to welcome you to the HP forums!Here is the link to the Service and Maintenance Guide for your PC: http://h20566.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=10477253&docLocale=en_US&docId=emr_na-c0... The memory module info in on page 38. The part number for the 8GB memory module is 826398-850.Good Luck

1 more replies
Answer Match 33.18%

Hello! I have a question.It is about upgrade my nootebook.I have 3rd Generation Intel Core i3-3120M can i upgrade  it to Intel Core i7-3632QM ?

A:probook 450 g0

Leroyinc. It is listed in your manual but not sure if it will work with your system board it has a 50% chance it will work??? https://h20566.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=5359405&docLocale=en_US&docId=emr_na-c0... The Core i5-3230M has an 85% chance. http://www.cpu-upgrade.com/CPUs/Intel/Core_i3_Mobile/i3-3120M_(PGA).html REO

1 more replies
Answer Match 33.18%

Hi I just installed XP 32-bit SP3 on Broadwell-UBut need drivers for:1. Wireless Intel DualBand 3160 which like everytching is not supported for the 9th generation Chipsets.2. How to activate the system ? Someone help ? Big Thanks in Advance

More replies
Answer Match 33.18%

Hey Guys:I had a problem with my laptop HP Probook 450 G2 Iam using Windows 10 X64 and when i setup it's AMD Radeon R5 M255 it is setuped but without any change and only working is Intel Video Driver  I tried to unsetup the Intel Driver but the new Wroking Driver is the Basic Video Driver  please help me making the AMD Driver is the Main Driver Thank you for your care .

More replies
Answer Match 33.18%

Hi, I recently bought a HP Probook 430 G2 and from the very first day the battery has said charging but it was not charging so I did a battery check with HP assistant and it said it was reporting a failure and needed replacing, and so I bought a replacement which arrived today and it has the same problem and hp assistant is giving the same result. Has anoyone had this porblem before or if anyone can offer any advice on how to fix this that would be much apprecaited.Thanks

More replies
Answer Match 33.18%

Dual graphics in laptop HP ProBook 455 G1Hello! I have a problem. I have laptop HP probook 455 G1 with dual graphics. integrated( AMD Radeon HD 7640G)+  discrete (AMD Radeon HD 8750M). I want to install the latest drivers. but what do I do if the discrete supports them, and integration - no.? And how to properly install the driver? Thanks

A:HP Probook 455 G1

Install the AMD driver that is available at the HP Support portal. (If there is not one available, leave the driver installation as it is, unless you mind that it stops working.) It contains the AMD and Intel driver. Do not install the Intel driver seperately. If you do install it seperately, the switchable  grapgics function will no longer operate as expected.

1 more replies
Answer Match 33.18%

I recently purchased HP 430 G2 and I would like to add storage (SSD).Can you tell me exactly what type of connector has M.2 or mSATA?If it goes M.2 what type (ex. 2242-D2 TYPE-B-M)?Restrictions pertaining to the maximum space <512GB or <1TB?

More replies
Answer Match 33.18%

Hi all,

Looking to install a second HDD for a laptop that doesn't really use their DVD bay.

Is this going to be a specific component for an HP laptop, or are they all pretty much standard now days?

Any recomendations on types / brands?
 

A:Second HDD bay for HP Probook 450 G1

11 more replies
Answer Match 32.76%

I had upgraded to Windows 10, that was a mistake in itself because of the mess with the DVD drive and other drivers.  In any event I attempted a full recovery and apparently the inage on the disk was corrupt.  Now I am left with an inoperable system.  Is there somewhere I can download the factory image from the website?  I cannot find the image.  Please help.... 

A:Probook 450 G1 Recovery

mjs0623 Hello;Allow me to welcome you to the HP forums!While Microsoft tells you that there is no risk in the Win10 Upgrade, because they let you believe that you can always revert back to your original OS and setup within 30 days, the ugly fact of the matter is that the Win10 GoBack function has proven to be unreliable -- and when it fails, it can leave machines in a corrupted state -- which doesn't always happen, but it does happen often enough to be a problem and you won't get any warning in advance that it is going to trash your PC!If that is not bad enough, the Win10 Upgrade is know, in some cases, to corrupt the Recovery partition stored there by the OEM that built the original machine. This pretty much guarantees that no HP Recovery is going to work: http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/HP-Recovery-Manager-Blocked-After-Windo... Ordinarily, I would recommend using HP Recovery Media to restore your PC to its original condition. That would erase the entire drive, format the drive, and install the OS, the drivers, and the HP utilities.Unfortunately, there is no HP Recovery Media linked to the HP Product Page for your PC. This could be an oversight by HP, or it could also mean that HP no longer stocks the recovery media for your PC. They no long stock recovery media for the older PCs.You can try contacting HP Customer Support directly, using the links below, to see if you can order if from them:If you live in the US or Canada, contact info... Read more

1 more replies
Answer Match 32.76%

Hey there. This is my first time posting and I've been looking for drivers for this laptop however I have one problem that's annoying me a bit. My laptop is old, but I upgraded to windows 10 and I've been trying to update the graphics drivers  with no success.  The specs are: (collected from DxDiag) ---------------Display Devices---------------Card name: Intel(R) HD GraphicsManufacturer: Intel CorporationChip type: Intel(R) HD Graphics (Core i5)DAC type: InternalDevice Type: Full DeviceDevice Key: Enum\PCI\VEN_8086&DEV_0046&SUBSYS_146D103C&REV_02Display Memory: 1696 MBDedicated Memory: 64 MBShared Memory: 1632 MBCurrent Mode: 1366 x 768 (32 bit) (60Hz)Monitor Name: Generic PnP MonitorMonitor Model: unknownMonitor Id: LGD02ADNative Mode: 1366 x 768(p) (59.636Hz)Output Type: InternalDriver Name: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32Driver File Version: 8.15.0010.2900 (English)Driver Version: 8.15.10.2900DDI Version: 10Feature Levels: 10.0,9.1Driver Model: WDDM 1.1Graphics Preemption: DMACompute Preemption: DMAMiracast: Not Supported by Graphics driverHybrid Graphics GPU: Not ApplicablePower P-states: Not ApplicableDriver Attributes: Final RetailDriver Date/Size: 11/26/2012 12:00:00 AM, 8369024 bytes I saw on the drivers page they had a better version for year 2013, as I've multiple times applied it, it has not changed anything.  What can I do?   Thanks!

More replies
Answer Match 32.76%

Hi,gave my laptop hp6560b to my daugther. She entered a bioss password administrator but lost it. I would need to remove it now. I read that it can be done with smc.bin. Would it be possible to provide me with the appropriate file. If yes I will send you serial number and uuid of the laptop.Looking forward to your support.Best regardsPat51

More replies
Answer Match 32.76%

Have performed hard reset, other known good power adapters, removed battery, memory and hard drive, installed new power cable all to no avail. These units will not start.

More replies
Answer Match 32.76%

Which model of M.2 ssd i can use to upgrade ProBook 450 G3 notebook?

A:Model of M.2 for ProBook 450 G3

@Den_m2014? Solid-state drive, M.2 256-GB, TLC827583-001 128-GB, TLC827053-001  Your manual here. http://h10032.www1.hp.com/ctg/Manual/c04825517 HP ProBook 450 G3 Notebook PC - Remove/Replace videos http://h20464.www2.hp.com/results.htm?SID=7834555&MEID=9A46722E-8743-4B24-A407-EC5BCB0254FA REO

7 more replies
Answer Match 32.76%

I have purchased HP probook 440G1 in the year 2013 with 04 (four) year warranty but HP Support Assistant shows that warranty expired on 13.01.2015. How it can be? Sl. No. is [Personal Information Removed], PRODUCT NO. - F6B15PA#ACJ PLEASE EXTEND THE VALIDITY OF WARRANTY FOR FOUR YEARS FROM THE DATE OF PURCHASE. REGARDS. PREM CHAND

A:HP probook 440G1

@yes1

 

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).

 

Thank you for visiting the HP Support Forum.

 

1 more replies
Answer Match 32.76%

Hello to everyone! I've got such a problem: my laptop is HP ProBook 430 g2, the battery is broken and I'd like to purchase a new one but I couldn't find it on HP Store. Perhaps I'm looking for it in the wrong place. Could you please help me find it?

More replies
Answer Match 32.76%

I bought a managed probook and i didnt notice it and it wont let me log on, and it says that there is already an administartor account and i try to go to bios settings and it says enter admin password i was wondering if you have a default password or something that might work.

More replies
Answer Match 32.76%

Good day All, Kindly help with the following drivers for Hp probook 450 G2, windows 8.1 pro 64 bit.  Display AdapterPCI\VEN_8086&DEV_0A16&SUBSYS_2248103C&REV_0BPCI\VEN_8086&DEV_0A16&SUBSYS_2248103CPCI\VEN_8086&DEV_0A16&CC_030000PCI\VEN_8086&DEV_0A16&CC_0300Network Controller PCI\VEN_8086&DEV_08B3&SUBSYS_00708086&REV_83PCI\VEN_8086&DEV_08B3&SUBSYS_00708086PCI\VEN_8086&DEV_08B3&CC_028000PCI\VEN_8086&DEV_08B3&CC_0280PCI communication controllerPCI\VEN_8086&DEV_9C3A&SUBSYS_2248103C&REV_04PCI\VEN_8086&DEV_9C3A&SUBSYS_2248103CPCI\VEN_8086&DEV_9C3A&CC_078000PCI\VEN_8086&DEV_9C3A&CC_0780 Regards. 

A:Drivers for Hp probook 450 G2

Hi: You need these drivers... This package provides the Intel video drivers, control panel and display audio driver for supported notebook models running a supported operating system. ftp://ftp.hp.com/pub/softpaq/sp73501-74000/sp73595.exe This package provides the drivers to support the Intel 7260/3160 Wireless LAN adapter in supported notebook models that are running a supported operating system.  ftp://ftp.hp.com/pub/softpaq/sp70001-70500/sp70472.exe This package provides the Intel Management Engine Components Driver for supported notebook models running a supported operating system.  ftp://ftp.hp.com/pub/softpaq/sp69501-70000/sp69938.exe

1 more replies
Answer Match 32.76%

Hi, I'm a field service tech with a frustrating problem.  HP Probook 640 G1, initial customer complaint was that the system will charge battery when turned OFF and plugged in, but system will not charge battery or use wall power when turned ON. Battery and power cable were replaced; no change.  Conclusion at that point was a problem existed between the power cord and power connector on the system board; thus the system board was replaced.  Since then, the laptop will not power up at all, on battery or when plugged into the wall.  Today I replaced the power button board, and got the same symptoms, but noticed that when I press the power button, the battery indicator LED blinks nine times and stops; nothing else happens.  Any suggestions would be greatly appreciated.

A:Hp Probook 640 Won't Power Up

@pat21784A

?Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).

If you are unfamiliar with the Forum's private messaging please click here to learn more.

Thank you,
Omar

2 more replies
Answer Match 32.76%

Hi Everyone, Just bought HP ProBook 430 G2 (HDD version - 500GB 7200rpm). There is a M.2 socket (M key) under the cover. - I would like to know this socket support M.2 SSD (B+M key) or not ? - Otherwise, only "mSATA" in bios for selection. Is this selection for boot from M.2 ?Thanks 

A:M.2 (NGFF) SSD on Probook 430 G2

anybody help to answer Thanks !!

8 more replies
Answer Match 32.76%

Hey All, I'm looking to buy a new HP Probook 450 G3 model number T3L12UT, and from what I understand in addition to having a HDD included, there should be an empty m.2 slot for a solid state drive.  My plan is to keep the HDD and add an SSD, but I want to make sure that this specific model of the Probook has that empty m.2 slot.  I guess the easiest question would be, do all models of the Probook 450 G3 come with that extra m.2 slot? Thanks for your time Phil

A:probook 450 g3 empty ssd

Here is the link to the Service Manual.There are four models available in the USA.One service manual covers all four models. Page 47 shows removal/replacement procedure for M.2 SSD. Page 2 shows compatible drives: M.2 2280 SSD (NGFF), SATA-3 Supports the following drives: ? 256 GB TLC ? 128 GB TLC Set as primary storage if selected.  If you found my answer helpful please say thanks by clicking on the Thumb's Up icon.If my answer solved your problem please mark it as the Accepted Solution. Thanks!   

1 more replies
Answer Match 32.76%

Ok, so we have decided to try a newer modle of the hp ProBooks not knowing that they cannot connect to the preivious docking stations we had purchased. After research we have found they work with the port replicator(usb3.0 HP)all seemed well until i get a service ticket inquiring about the freezing issues, After checking the drivers and more recent version of the bios still no dice. I had opened the laptop(we keep them closed initally-obviously lol for the docks) and the laptop it self was unresponcive, ctrl alt del did nothing nor did the curser move.- I am running the ProBook 450 G3 no hardware changes- most recent updates and drivers- Windows 10- HP Port Replicator is new and functioning- 1 pissed off employee  

A:ProBook 450 G3 freezing

It is hard to tell from your comments where your issue is at this time. In terms of the usb 3.0 dock, i believe it requires displaylink drivers, which should be available as a softpaq from HP. Did you install them on your laptop?

1 more replies
Answer Match 32.76%

I recently setup my windows.after that I found that my laptop is muted.And it says no audio output device is installed

A:I need a help for HP probook 450 G3.Windows 8.1 64 bit.

hi Go to the link below and update the latest drivers avilable http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=7834518&swLangOid=8&swEnvOid=4158

1 more replies
Answer Match 32.76%

Hey guys, I recently bought ProBook 450 G3 with i3 Skylake processor and 256GB SSD. Dont get me wrong, it is well crafted machine, but one thing gets on my nerves. Due tu specs, I did expect almost complete silence. However, when I am broswing, or even doinn simple things in Office, the fan countinously goes very loudly on and off, for a short period of time (5 sec.) without any reason. The notebooks temperature in that situation is around 40C, but I believe it is not the main factor, since not always when the laptop is over 40C fan kicks in. I mean, it is irregular and I am not able to pinpoint the cause, mainly because there may not be any. As the fan noise is very hearable, it makes working on this laptop in quiet enviroment kind of annoying. I have to add that all drivers and BIOS updated and no obstales are near the vent.  I also tried various power plans etc. Basically all to minimize that behaviour but it still occurs.  Any idea how to solve this is more than appreciated. Thanks in advance!

A:ProBook 450 G3 - Fan going on & off for no reason

I'm having the same problem, in fact I had to exchange a few Probook 450 G3s for various reasons including the weird and overactive fan noise, and all had the same fan issue, makes you doubt the build quality. This is my first and last HP laptop, I won't be buying HP again, back to Dell or someone else.

1 more replies
Answer Match 32.76%

guys, where can i find the sound driver? Its not on the support website and the default windows one sounds muted(and it isn't). Thanks for the help.

More replies
Answer Match 32.76%

So yesterday I opened my Probook 4540s, and it was at 0% charge (The OS literaly displayed that), which was weird. I tried playing with it a little, I've connected it to a charger, and it did not detect it - and eventually the probook shut down.At this moment the laptop won't turn on, and my guess is it's either the power brick, or the motherboard. I tried replacing the power cable connected to the brick but it didn't quite help.When the power cord is connected to the laptop, the LED blinks each second, but its a weird blink, like not on\off, it's turning on, blinking, turning on, blinking etc, but the laptop isn't charged, it wont start with either the battery connected or without it. Tried hard resetting, didnt work either.Does that sound like more of a motherboard issue? If so, what could I do to fix it? Should it be expensive?

A:HP Probook won't start

When I say it did not detect the charger I mean it was simply not charging

1 more replies
Answer Match 32.76%

i upgraded my system from windows 7 to windows 10 and am having issues with my audio, i troubleshooted and it responded that am missing base system driver and PCI communications driver please what do i do

A:hp probook 6550b

Hi: Your notebook is not supported by HP for W8, W8.1 or W10. The missing devices have no bearing on why the audio is not working. You use the windows 7 drivers for the base system and pci simple comms controller devices. The base system device needs this driver. This package contains the Ricoh Media Card Reader Driver for the supported notebook models and operating systems. The Ricoh Media Card Reader driver enables the integrated media card slot. ftp://ftp.hp.com/pub/softpaq/sp46501-47000/sp46999.exe The PCI Simple Comms Controller needs this driver... This package provides the Intel Management Engine Components Driver and Interface. ftp://ftp.hp.com/pub/softpaq/sp59501-60000/sp59684.exe What is the problem with the audio?  No sound at all? First see if the W7 driver works for the audio too...install and restart the PC. This package contains the IDT High-Definition (HD) Audio Driver for the supported notebook/laptop models and operating systems.  ftp://ftp.hp.com/pub/softpaq/sp48001-48500/sp48147.exe If that doesn't fix the sound, I have one other thing you can try.

1 more replies
Answer Match 32.76%

Cant start proBook 430 G2.Power led blinkingANDCaps lock blinking instantlyANDPower button blinking instantlyI have tried to put out the battery then 30 sec push the power button. No effectVideo:https://youtu.be/NZFiR9B2L5s

More replies
Answer Match 32.76%

Is it possible to upgrade to a I"ntel 535 2,5" SSD 480GB"

A:HP ProBook 4530s hdd to ssd

Hi @hulp_gezocht! Yes, you should be able to put a SSD in your notebook, but since there is only one HDD bay and all you need to do replace it with the SSD. Here's the link to the service manual if you want to read ahead on how to remove and replace the HDD, more specifically - page 52:http://www.hp.com/ctg/Manual/c03054480.pdf Hope this helps and best of luck!




Official WD Representative.Please, Kudo me and choose as Answer if this post helped you!

1 more replies
Answer Match 32.76%

My employer and I are seeking a computer skin for the HP Probook 450 G3 that has large print labeling for the keyboard.  We know that most skins of this nature are designed for independent keyboards; but this is a case where the staff person  has a laptop and is also sight impaired.  We're not seeking large print stickers as others may use this laptop during and after the internship period. We're wondering if anyone might be able to help us.Peter KelleySt. Paul, MN USA

More replies
Answer Match 32.76%

I accidentally spilt tea on my keyboard of hp ProBook 4440s.  I dried it the best as i could. Everything seems to work fine, only my trackpad is now not working. What should i do? Also is this ProBook 4440s keyboard spill proof? I am scared and afraid. How do I repair my trackpad? 

More replies
Answer Match 32.76%

Hi,I've twice had to exchange a Probook 450 G3, for additional reasons also (faulty power connector), so have had experience with 3 units altogether. All 3 had the same issue, the fan would kick in too often, a few instances a minute, making an up and down whirring sound which was very annoying and distracting. The strange thing is that the fan would kick in when the CPU usage was minimal, <5%, web browsing is the most taxing thing I do, no gaming or intense graphic applications.Never had an issue like this with any other laptop/computer, it's basically brand new so no possibility of dust, too hot environment etc. My 8 year old Dell laptop with much more inferior specs handles these activities easily with infrequent fan noise/activity.The laptop is not getting noticeably hot for the fan to turn on and off so often. Is the G3 so heat inefficient that the CPU gets too hot very easily, or is the fan's thermal sensor temp. range too low and the fan is kicking in unnecessarily? I've updated the BIOS and chipset and already contacted HP support who want me to send it to them, but I explained that this issue happened on all 3 units, revealing that the model design/components could be at fault.Would appreciate any insight/explanation for this.

A:Probook 450 G3 Overactive Fan

I've seen other people complaining about the same issue, so I'm not alone: ProBook 450 G3 - Fan going on & off for no reason Fan making a wavy sound / HP ProBook 430 G3 Laptop's cooling fun speeds up speeds down constantly fan noise HP probook 430 G2 - fan noise probook 450 g2 cooling fan

1 more replies
Answer Match 32.76%

Hi,I've twice had to exchange a Probook 450 G3, for additional reasons also (faulty power connector), so have had experience with 3 units altogether. All 3 had the same issue, the fan would kick in too often, a few instances a minute, making an up and down whirring sound which was very annoying and distracting. The strange thing is that the fan would kick in when the CPU usage was minimal, <5%, web browsing is the most taxing thing I do, no gaming or intense graphic applications.Never had an issue like this with any other laptop/computer, it's basically brand new so no possibility of dust, too hot environment etc. My 8 year old Dell laptop with much more inferior specs handles these activities easily with infrequent fan noise/activity.The laptop is not getting noticeably hot for the fan to turn on and off so often. Is the G3 so heat inefficient that the CPU gets too hot very easily, or is the fan's thermal sensor temp. range too low and the fan is kicking in unnecessarily? I've updated the BIOS and chipset and already contacted HP support who want me to send it to them, but I explained that this issue happened on all 3 units, revealing that the model design/components could be at fault.Would appreciate any insight/explanation for this.

More replies
Answer Match 32.76%

Hello everyone! I have HP ProBook 440 G3 (X0N42EA) with Windows 8.1 x64 installed on M.2 SSD 256 GB TLC (SanDisk X400 if it is important), which is installed in my notebook from the factory. Win 8.1 was upgraded from Win 7, which was installed from the factory also.This model has both M.2 and SATA sockets. So in my case I have a free SATA socket. I want to upgrade notebook's storage volume adding a 2.5 512 GB SSD (SanDisk X400 also, if it is important also). I insert new SSD, start the PC and get an error message, that boot device not found and I have to install an operating system.OK. I set up in the BIOS (UEFI interface actually) UEFI boot order: 1st - USB; 2nd - M.2; 3rd - SATA. And for legacy boot order I have only two options, which are also set up respectively: 1st - USB; 2nd - M.2. New SATA SSD volume even doesn't display in legacy boot order options. I save changes and reboot PC and have same situation, same message.I try different ways: checking only UEFI boot order, only legacy boot order, checking both of it - no results. Even when I choose M.2 directly for boot via F9 button - no changes.When I unmount new SSD from notebook, PC starts normally, everything is OK.Both M.2 and SATA SSD are MBR partitions, if it is important. Does anybody know how to mount SSD into SATA socket and make PC boot system from M.2 SSD? Thanks in advance!  

More replies
Answer Match 32.76%

Hi, Got a Probook 470 G1 that doesn't want to power up. The small LED beside the power input socket is flashing constantly on and off (white). I've tried removing the battery and holding down the power key as recommended but to no avail. Also tried powering it up without the battery, but still only get the flashing white led. According to one forum, the flashing white led is a sign of a battery straight out of the factory that needs charged. The laptop was working fine until a couple of days ago.  I inadvertently left it on all day with a powerbank connected to the usb.  I'd thought it was my mobile phone that I'd plugged in. Is it possible that connecting the powerbank had damaged the battery? Any advice would be gratefully received.

More replies
Answer Match 32.76%

Hello people, I have bought a HP ProBook 470 G3 and I am trying to insert a second hard disk into the notebook. The first drive is a SSD M2. I found out that there is no bracket inside the notebook, so I cannot secure the hard disk. I have found the HP 828147-001 HDD Hardware Kit, but then I get two different brackets. One with three screws and one with four screws. I need the one with four screws. I hope one of you can help me to find the right one what will fit in my notebook. BrokenWing PS: I am located in The Netherlands.











Solved!
View Solution.

A:HP ProBook 470 G3 HDD bracket

Dear Customer,  You have found the right part number for the HDD Bracket.  828147-001You may use this and it is compatible. For more information sending you the complete guide. Please check the below link. http://cdn.cnetcontent.com/f0/f9/f0f98127-beaa-45b0-bb5b-58a10d8ef9a5.pdf  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee  

3 more replies
Answer Match 32.76%

Hiii.... its Subhranshu.. dr frnds i hav HP PROBOOK 5310m [energy star] my notebook dosent start at all..... its jst 2 months old(bought on may 3rd 2016) it was performimg excellent till the last time i used it(7th jul 2016). Also i had shut it down properly and yestrday when i turned it on it showed a message:''NON-SYSTEM DISK OR SYSTEM DISK NOT INSTALLEDREPLACE AND STRIKE ANY KEY WHEN READY''And didnt start at all. Plz help me run my notebook

A:hp probook 5310m

Sorry friendsThe actual message is: ''non-system disk or disk errorreplace and strike any key when ready''Please please please help

1 more replies
Answer Match 32.76%

Hello I need a multimedia audio controller driver windows 7 64 bit hp for probook 450 G3, 

A:Driver probook 450 G3

@Rani-2016? http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7834518&swItemId=ob_158042_1&swEnvOid=405... REO

6 more replies
Answer Match 32.76%

Hello, i have a HP ProBook 4520s and im using windows 7 professional i tried to insall windows 10 couple of times and when it downloads and starts install in middle of some reboots i get a black screen and its stuck i tried to update my graphic card it says its up to date any suggestions please? thank you.

More replies
Answer Match 32.76%

Needing drivers for PCI Simple Communications Controller also have an Unknown Device in other devices in computer management.

A:HP Probook 650 G2 drivers

Hi: For the PCI Simple Communications Controller you need to install the Intel Management Engine Interface driver found under the chipset driver section. For the unknown device you probably have to install the 3D driveguard driver found under the storage driver section.

1 more replies
Answer Match 32.76%

Hello, Right now I use win7 64bit OS. And I have internet problems( speed problems, with my old laptop speed was much bigger)  I use wireless internet. I want to know do I use the right wireless driver, because there are many choises in HP wireless drivers list.Can you help me ?

More replies
Answer Match 32.76%

Hello, the problem with the touchpad does not work, internal and external damage not driver download Synaptics Mouse Driver refused to be installed. 2) system temperature 90d how to fix, laptop cleaning performed 1 week ago

More replies
Answer Match 32.76%

Hello, the problem with the touchpad does not work, internal and external damage not driver download Synaptics Mouse Driver refused to be installed. 2) system temperature 90d how to fix, laptop cleaning performed 1 week ago











Solved!
View Solution.

A:HP ProBook 470 G1 Notebook PC

Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
 

German: HP Kundenforum
Spanish: Foro de usuarios de HP
French: Forum des utilisateurs
Portuguese: Frum dos usurios HP
Chinese: ??????????
Korean: HP ??????
Thank you for your understanding

3 more replies
Answer Match 32.76%

my hp probook g3 440 i3 won't turn on











Solved!
View Solution.

A:my hp probook g3 450 won't turn on

please anyone help how can I turn on my probook???

2 more replies
Answer Match 32.76%

Hey, this Is my first time posting probably ever in any forum.  Im not a genius when it comes to computers, but I more than get buy.  I have a home studio that I have had for almost 4 years now.  I bought my laptop new for this purpose also 4 years ago.  I needed firewire and couldn't quite afford a macbook or imac plus I am familiar with windows OS.  I could of went with a hub of some sort but my desktops were already full of stuff.  Anyways I bought the HP Probook 6465b after the store owner swearing it would function just as good as a macbook. IT HAS BEEN A NIGHTMARE!  I guess simply for the fact of not going with an intel chip.  My Question, Is there an upgrade im unaware of or a part or two I can buy to fix these issues cheaper than a used macbook or laptop on windows garaunteed to functionas needed?

More replies
Answer Match 32.76%

i just recently bought a new hp probook, other wise it's been handeling fine except that when i've shut the lap top off, ( from the start up menu shut down option) it will just randomly (usually during the night) start up on it's own. i've checked up date programs but their updaters should update somtime during the day time...

A:Hp probook starts up on its own

There has to be some sort of program that has been configured to start up the laptop after having been turned off x amount of time or at a certain time, I would also have a close look at the BIOS as wake on LAN or a similar setting may cause this as well.

1 more replies
Answer Match 32.76%

When th epower button is pressed, the CPU fan starts and runs excessively. The CAPS lock button flashes, the power light for the power adapter flashes, and that's it. I cannot get into the BIOS by pressing F10, and nothing is displayed on screen. There are no peripheral devices plugged in. I have removed the battery and mains adapter and press and held the power button for more than 15 seconds as instructed in another article - same symptoms, ie, CAPS lock button flashes, the power light for the power adapter flashes, and that's it. I have removed and reseated the memory module and and tried starting the machine - same symptoms, ie, CAPS lock button flashes, the power light for the power adapter flashes, and that's it. I have removed the hard drive and and tried starting the machine - same symptoms, ie, CAPS lock button flashes, the power light for the power adapter flashes, and that's it. I've reassembled the machine nd and tried starting the again - same symptoms, ie, CAPS lock button flashes, the power light for the power adapter flashes, and that's it. I've even tried NOT using the power adapter, just turning the machine on with the battery in place - ame symptoms, ie, CAPS lock button flashes, the power light for the power adapter flashes, and that's it. Does anyone have any idea how I can at least get into the BIOS or run any of the diagnostics tests? If I could get that far, it wo... Read more

More replies
Answer Match 32.76%

Hello everyone, So i have a problem with my HP ProBook 4320s, it won't turn on. Here's whats happening when i try to turn it on. When i have the battery in without the recharger and i try to turn it on, the orange LED light for the recharger blinks 8 times and same when i have battery in with recharger plugged in. Note, the orange LED light should stay on when recharger is plugged in and it's recharging the laptop. Now, when i have the battery out and the recharge plugged. The orange LED light doesn't even turn on at all.  Now here's what i have done. I did a hard reset, which i unplugged the recharger and removed the battery from the laptop. I then held down the power button for 60 seconds and after that i plugged in the recharger without the battery and attempted to turn on the laptop. Nothing happens and the oranged LED light doesn't turn on. I then left the recharger plugged in and this time inserted the battery. The laptop still won't turn on but the orange LED light blinks 8 times. Now i've tried this with 2 different recharger and same result above. I can confirm that the 2 recharger is working because the 2 recharger works with my other HP laptop, meaning it was able to recharge my other HP laptop.  My other HP laptop also shares the same recharger as the HP ProBook 4320s by the way.  What i've also done is, i've opened the HP ProBook laptop, took out the RAM and reinserted the RAM and tried the above and same result. I did this... Read more

More replies
Answer Match 32.76%

I have a HP Probook with a docking station, however I am experiencing a lag between the laptop and what appears on the monitor. The lag is not there when I work on the laptop directly. Any suggestions to rectify this?

More replies
Answer Match 32.76%

Hello everyone I have just bought a HP probook 450 G3 laptop. It is now running windows 10 64 bit single language. However, i cant seem to find the stereo mix on the recording setting. The sound card is conexant. is it not included? It would be weird if it is not included since my old HP compag 6520s which i purchased 8 years ago also got this functionality. please show me how to have that feature worked on my laptop Thanks in advance

A:stereo mix in Probook 450 G3

Have the same problem with HP Probook i7 450 G3  

1 more replies