Tech Problem Aggregator

520-1030 cpu upgrade

Q: 520-1030 cpu upgrade

On the hp website it stated that the i7 2600 is supported, now that I tried it on boot the screen says unsupported cpu installed and it justs shuts down, I already upgraded the bios any suggestions that I can do to resolve this? thanks in advance

A: 520-1030 cpu upgrade

An Intel Core i7 2600(95W TDP) and 2600s (64W TDP) is supposed to be supported. Are you certain that what you installed is not an Intel Core i7 2600k instead?

9 more replies
Answer Match 44.94%

Greetings,  I was wondering what to look for if I wanted to upgrade my 320-1030  in terms of a motherboard and CPU? I was contemplating upgrading the CPU to an A8-3820 on the existing board, but I now am wondering if it is possible to move to a faster CPU (which I am assuming would require a new motherboard  if that is possible).

More replies
Answer Match 44.52%

Hello, I've been saving up for some time now and I would like to build a good gamin computer. I know I have the right money to build a solid performing one, one that can run games on high quality too. The only problem is, I don't know which parts to buy. I do know how to build it however. I would like some help selecting parts from you. One final point, I will want it for doing other stuff, not demanding just practical uses like searching and making documents etc. Thanks so much!
 

A:New PC Build - £620 ($1030)

You need to provide a little more info;
1 Do you want amd or intel?
2 Do you have any parts you are going to reuse ie case, keyboard/mouse, optical drive, etc?
3 Are you including the cost of windows for your new build?
 

2 more replies
Answer Match 44.52%

Does anyone know where I can order an usb drive to get my HP Mini 1030NR restored to factory setting? Thnx 

A:Hp Mini 1030 NR

hi. did you ever get the recovery disks? I am in the exact same situation and cannot for the life of me find the recovery image anywhere!

1 more replies
Answer Match 44.52%

One of our users just lost control of her PC. Someone remotely took control of her mouse. The only unusual activity we have seen thus far is Port 1030 called iad1. Has anyone seen this?
 

A:iad1 on TCP 1030

Hi nmorrisonaz,

Not sure If any malware can do that.

But please do this. Click here to download Hijack This. Run Hijackthis.
Click the "Scan" button when the scan is finished the scan button will become "Save Log" click that and save the log.

Go to where you saved the log and click on "Edit > Select All" then click on "Edit > Copy" then Paste the log back here in a reply.

DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required. Someone here will be glad to advise you on what to fix.

*Note: When you download Hijack This Do Not download it to a temp folder or to the desktop. Create a permanent folder somewhere like in My Documents and name it Hijack This and put it in that folder.
 

3 more replies
Answer Match 44.1%

So I want to upgrade my RAM on the 320-1030. The specs page says "Two 200-pin DDR3 SO-DIMM sockets".It also says "Supports DDR3 SO-DIMMs" and specifically "PC3 10600 (1333 MHz)" and "PC3 12800 (1600 MHz)". Yet more HP contradictions (lies?)1) The parts page lists the item pre-installed is 572293-D88, a 204-pin item. See here, here, here, here, and here.2) Using the automated systems for major RAM sellers all indicate 204-pin RAM will work on the 320-1030. Crucial.comNewegg.com What gives?!? 

A:Touchsmart 320-1030: Is it 200 pin SO-DIMM or 204?!?!? Yet m...

Hi: I do not believe there is any such thing as a 200 Pin DDR3 SODIMM, so HP's reference to that is incorrect. A DDR2 SODIMM memory module is 200 pin, and a DDR3 SODIMM is 204 pin. http://en.wikipedia.org/wiki/SO-DIMM Paul

9 more replies
Answer Match 44.1%

v6.2.0.1030 Apr 13, 2015

Fixed: Bug fixes
http://www.360totalsecurity.com/en/version/ts/

Download:
http://free.360totalsecurity.com/totalsecurity/360TS_Setup_6.2.0.1030.exe
 

More replies
Answer Match 44.1%

I was trying to speed up a Touchsmart 600   Info below:
Model #: 600-1000t
Product #: AW023AV-ABA
[personal information removed]
Software Build #: 94NAv6PcA5
Service ID #: 011-610
PCBRAND: Pavilion
 
I search HP support and it says :   
Memory: DDR3 SO-DIMM (200-pin)
Tyoe: PC3-10600 (DDR3-1333 MHz)
 
Of course when I google "DDR3 SO-DIMM (200-Pin) PC3-10600 i get all types of hits for HP Touchsmarts,  when I remove the (200-pin) from the search criteria i get all types of 204-pin RAM Sticks. 
 
I would tend to beleive that HP's telephone support technicians in what sounds like india don't know and they're looking it up in their data-bases.  I believe the HP databases to be incorrect.  The best option is to remove a stick and see exactly what the label on the Memory Stick says, and then buy bigger sticks of the same RAM as in the computer.  I have 3 sticks to try,   DDR3 - 1066 MHz,  DDR3 - 1333MHz  & DDR3-1600MHz.  i think it's the

A:Touchsmart 320-1030: Is it 200 pin SO-DIMM or 204?!?!? Yet m...

Spoiler (Highlight to read)  I think I'm going to go with the 204-Pin.   I think the printed HP documentation is a typo and they really intended to type 204-pin.   I don't think it's my memory anyway because the usage rarely goes over 25% usage of physical memory.  i think the server i'm accessing is running slow... 

1 more replies
Answer Match 44.1%

   Information
Foxits free PDF Reader has been updated to 3.1.3.1030. You can get it here.
Foxit Software

A:Foxit PDF Reader 3.1.3.1030 available

+1 for Foxit Reader (especially those of us with a distaste for Acrobat).

2 more replies
Answer Match 44.1%

For this type what can I upgrade my processor to?  I believe it's only a 4GB as well. I need more RAM and processing power. thank you

A:I have an HP TOUCHSMART 320 PC MODEL 320-1030 looking to upg...

Hi, Yes. Please check 2 sections Processor upgrade informationMemory upgrade informationon the following link:     http://support.hp.com/au-en/document/c03026602 Regards.

1 more replies
Answer Match 43.68%

I just looking for information on how to install windows 10 on my Touchsmart 320-1030 PC. The PC is only 2-4-year-old and runs great. What steps do I need to take, in order to install windows 10 on this device?

More replies
Answer Match 43.68%

Hello everyone, I have been trying to get my wireless working on my Dell Inspiron n5110 on Windows 7 64 bit to no avail. In device manager I have the error "code 10 this device cannot start" I have tried almost everything so far. Reinstalled drivers multiple times, with multiple versions. I have replaced the adapter even though I knew it was a software problem because the wireless works on a live boot Ubuntu and as a last resort I have reinstalled Windows and installed all the proper drivers but still nothing. Any thoughts on what I could be missing or some suggestions?

A:Centrino-n 1030 driver issues

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

8 more replies
Answer Match 43.68%

I am totally obsessed with downloading music, but awhile ago I attemped to download an upgrade to the basic Kazaa system. Once I had fully downloaded the upgrade I went to click on Kazaa and a message popped up saying," You have uninstalled a part of Kazaa needed to run and to close and reinstall." (I believe it was called error 1030, I'm not positive though) Anyway, I uninstalled Kazaa and reinstalled several times and the same message keeps appearing.I checked to make sure I had all the needed componets to run Kazaa aswell. I can't figure out what to do. I tried other music sources but I can't find one I like as much as Kazaa. If you know what I should do please HELP!!
 

A:Kazaa Error 1030, any adivse?

What I would do is:

1. Use a spyware scanner to delete all the spyware that comes with the Kazaa download
2. uninstall Kazaa using the JV16 power tool
3. Do a file search for Kazaa and delete all of the files that are found.
4. Backup the registry
5. Use Jv16 power tool to clean the registry.
6. If you want to and are brave enough, do a manual search for useless Kazaa keys in the registry (be sure to have a backup if you do this)
Reinstall the latest Kazzaa with all of its Spyware. (Perhaps you might want to try Kazaa Lite)
 

2 more replies
Answer Match 43.68%

Hi, I hope someone out there can shed a little light on this situation as it's doing my nut in!

We have a network with 3 Windows 2003 servers and workstations all with XP. When the users log in a script runs which maps network drives and pushes printer connections etc. Also we have several group policies set which restrict pupils and staff in certain ways. Nothing drastic though. Just 'Cant see certain Control Pannel Items etc'.

Now all was working perfectly until a couple of weeks ago 2 staff members came to me and said "I can't get on the interenet or e-mail". I had a look and when they logged in on their normal computer it seemed to log in fine but then receieved a couple of "Cannot perform this action due to restrictions on effect on this computer" messages. This message also appears when they try to click on the Internet for example. On closer inspection it has run the scripts ok because I have the shared drives and printers. But the virus scanner which is sophos in our case hasn't loaded (it comes down from the server), also there is no All Programs in the start menu, or shut down.

If I log off and check the event viewer I have event 1030 there which refers to an error with group policy.

Now the most annoying problem is it appears completly random with it's timing. Usually a shut down and restart of the computer fixes it. Moving to another computer can also fix it. It dosent always do it on the same computers, other... Read more

More replies
Answer Match 43.68%

Is it just my imagination or has the attempts to begin communication on about ports 1025-1035 begun to rise?

Looking over data on this I really dont see its nominal importance other then the beginning of the road or bottom of the stairs to attempt throughput communication, if you will =)

Anyone else care to take a stab at this ?

-Z
 

A:Port 1030 Alerts, Give or Take

7 more replies
Answer Match 43.68%

Hi, I hope someone out there can shed a little light on this situation as it's doing my nut in!

We have a network with 3 Windows 2003 servers and workstations all with XP. When the users log in a script runs which maps network drives and pushes printer connections etc. Also we have several group policies set which restrict pupils and staff in certain ways. Nothing drastic though. Just 'Cant see certain Control Pannel Items etc'.

Now all was working perfectly until a couple of weeks ago 2 staff members came to me and said "I can't get on the interenet or e-mail". I had a look and when they logged in on their normal computer it seemed to log in fine but then receieved a couple of "Cannot perform this action due to restrictions on effect on this computer" messages. This message also appears when they try to click on the Internet for example. On closer inspection it has run the scripts ok because I have the shared drives and printers. But the virus scanner which is sophos in our case hasn't loaded (it comes down from the server), also there is no All Programs in the start menu, or shut down.

If I log off and check the event viewer I have event 1030 there which refers to an error with group policy.

Now the most annoying problem is it appears completly random with it's timing. Usually a shut down and restart of the computer fixes it. Moving to another computer can also fix it. It dosent always do it on the same computers, other peolpe can log on to ... Read more

More replies
Answer Match 43.68%

Hello, we have recently purchased several HP Elitebook 1030 G1 notebooks. These come with Windows 10 out of the box, and no discs at all. HP seem to offer a Windows 7 recovery disc via drivers & downloads but this only seems to be for drivers and applications post-Windows 7 install. We still use Windows 7 (Enterprise x64) deploying via SCCM. As the laptop doesn't have a LAN port HP support suggested getting an HP USB-C to Ethernet adapter, but this doesn't seem to help with PXE boot. So moving onwards, I then attempted to do a manual install of Windows 7 x64 via USB. Initially it didn't even boot without turning off secure boot and turning on legacy boot. As the laptop has an M.2 ssd it is not even found by the setup process. I have now gone through adding sata and usb3 drivers via dism to boot+install wim's and also an MS hotfix for NVMe support (https://support.microsoft.com/en-us/kb/2990941). Unfortunately after all this it is still not able to see the hard drive. Unless I am going blind I cannot see any information about this on HP Support. Has anyone done this on this model notebook or similar (ie M.2 ssd)? Thanks

More replies
Answer Match 43.26%

Hi,

Please guide me how I can get a driver for my brother printer HL -1030 for Windows 7. I called Brother office in Canada and they say this printer is not compatible with Windows 7. Is there any other printer driver I can download and get my printer working.

Thanks in advance.

Wonderdollar

A:Brother HL-1030 printer driver for Windows 7

You should be able to use the XP drivers and install them in compatibilty mode.

Here's a link to the XP Home/Pro 32-Bit Drivers
Brother Solutions Center: HL-1030: Downloads: Others

To run the installer in compatibility mode:

Right Click Installer > Properties > Compatibility > Select the OS you want. (In this case, XP)

9 more replies
Answer Match 43.26%

hi!

hello, first off i have scanned with adaware pro se, spybot, and h2, also mcafee antivirus and a couple of online scanners--this is what remains

i have some pesky files burrowed into my pooter, i am pretty sure the files in the temp folder are bad....but when i search for the executable, all i can find are prefetch files....i think the prefetch files are generating the temp files...

i have used msconfig to stop some files from statring,and that has stopped an error screen that displayed this message at start up everytime:

rundll egdhtml-1030 dll error

i reactivated them in msconfig for this logfile...

also- whenever i turn on the computer, it frezzes up after booting to windows, i found that killing all the rundll32.exe files make it able to run again!!!!!!

so they must be bad, too...

here is my log, thank you very much for any help!!

Logfile of HijackThis v1.99.0
Scan saved at 3:36:10 PM, on 1/30/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\McAfee\McAfee Privacy Service\GUARDDOG.EXE
C:\WINDOWS\system32\gearsec.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MPFSERVICE.exe
C:\PROGRA~1\McAfee\SPA... Read more

A:egdhtml-1030.dll error+rundll32.exe*logfile inc.*

Please print out or copy this page to Notepad. Make sure to work through the fixes in the exact order it is mentioned below. If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should not have any open browsers when you are following the procedures below.

Go to My Computer->Tools/View->Folder Options->View tab and make sure that 'Show hidden files and folders' (or 'Show all files') is enabled. Also make sure that Display the contents of System Folders' is checked. Windows XP's search feature is a little different. When you click on 'All files and folders' on the left pane, click on the 'More advanced options' at the bottom. Make sure that Search system folders, Search hidden files and folders, and Search subfolders are checked.

For the options that you checked/enabled earlier, you may uncheck them after your log is clean. If we ask you to fix a program that you use or want to keep, please post back saying that (we don't know every program that exists, so we may tell you to delete a program that we think is bad to keep).

Turn off system restore by right clicking on My Computer and go to Properties->System Restore and check the box for Turn off System Restore. Click Apply and then OK. Restart your computer. After we are finished with your log file and verified that it's clean, you may turn it back on and create a new restore point.

Download AboutBuster and unzip it to a folder on your the D... Read more

4 more replies
Answer Match 43.26%

First up, hello everyone.

I have XP computers connected to a SBS2003R2 domain that is posting 1030 Userenv errors in the eventlog. I've not checked them all but three of them definitely are, so we can presume they all are.

Through Userenv.log, I've wiggled it down to two variants of:

USERENV(314.480) 21:50:37:892 ProcessGPO: CheckFilterAcess failed for <CN={C94DA5DA-A892-44ED-B77D-618A143ED5CC},CN=Policies,CN=System,DC=[domainname],DC=local>. Filter not found
Click to expand...

Followed by many of the following that correlate with the eventlog errors:

USERENV(318.868) 09:47:24:929 ProcessGPOs: GetGPOInfo failed.
Click to expand...

My question is - whereto from here? OUs, GPO and the such is on the edge of my knowledge. It seems that if I can find what GPO is failing, I'm there.
 

A:Eventlog 1030 and userenv GetGPOInfo failed

I would suggest since you are apparently having troubles with a Small Business Server that you ask to have this post moved to the Networking forum here at TSG. You will get a better response there. You can do this by clicking the little triangle at the top right corner of the window and ask a moderator to please move this thread to that forum
 

2 more replies
Answer Match 43.26%

I'm trying to replace a faulty wireless card and I can't figure out for the life of me where to order a new one. 'HP Part Surfer' doesn't return anything. I'm also not entirely sure where the part number on the wireless card is, all I can really see that might be it is a 'PNOP' number.Thanks in advance!

A:Ordering a Intel Centrino Wireless-N 1030

Dear Customer,  These are the Wireless cards supported by the unit. Intel Centrino Advanced-N 6230631956-001.Intel Centrino Wireless-N 1000593530-001.Intel Centrino Wireless-N + WiMAX 6150633817-001.  Also please check the below link having the complete guide of your unit.http://h10032.www1.hp.com/ctg/Manual/c02842252  I  recommend you to Contact HP Support over the Phone for further assistance.  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

1 more replies
Answer Match 43.26%

These event just started appearing a day or two ago, but they continue to repeat every 5 minutes:

Event 1030:
Windows cannot query for the list of Group Policy objects. Check the event log for possible messages previously logged by the policy engine that describes the reason for this.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Event 1058:
Windows cannot access the file gpt.ini for GPO CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=bbpi-pdc,DC=billsblue,DC=com. The file must be present at the location <\\bbpi-pdc.billsblue.com\sysvol\bbpi-pdc.billsblue.com\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini>. (Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator. ). Group Policy processing aborted.
They occur exactly every five minutes, and always in this order. I searched for the gpt.ini file it's looking for and found it.

I don't really have any group policies in place, just basic users and computers. Nothing fancy. And I'm afraid I don't quite understand AD enough to just 'experiment' until I make these error go away.

Any ideas and/or guidance would be welcome.... thanks
 

A:Event 1030 & 1058, repeating. Guidance?

One possibility:
As per Microsoft: "This behavior may occur if the following conditions are true: your Windows XP-based computer is a member of a domain, and the Microsoft Distributed File System (DFS) client is turned off (disabled). To resolve this issue, turn on (enable) the DFS client". See M314494 to find out how to do this. Also check M810907 for a hotfix.

Other possibilities:
http://www.eventid.net/display.asp?eventid=1030&eventno=1542&source=Userenv&phase=1
 

3 more replies
Answer Match 43.26%

The video card in my Pavilion h8-1030 died and I need to find a replacement. If possible, I'd like to upgrade the card at the same time to the best possible card that would work on this system, within on total $350 budget. Being overly optimistic and with a big dose of wishful thinking I had actually ordered a MSO GeForce GTX 970 , but before it arrived I read that it will not work as teh BIOS version cannot be upgraded to version 8. So I am sending that card back as soon as it arrives. I am unable to buy a whole new computer at this time, so I'm going to have to settle for a new GPU (and PSU if needed). I don't game but I do use Adobe CC 2015 applications, mostly photoshop adn lightroom but ocasionally also premiere and in-design. Before failing the old card was struggling with certian photoshop functions and video editing was slow and frustrating. This is why I would like to upgrade the GPU. Motherboard H-RS880-uATX (Aloe)Processor AMD Phenom II X6 1090TMemory 10 GBBIOS, American Megatrends Inc. 6.12 Is there a list of compatible GPUs? Thank you ever so much for your help.

A:what Video Card upgrades are possible for Pavilion h8-1030?

Hi, The version 6 BIOS in your PC is not compatible with many of the newer graphics cards.  You will need to use an older legacy graphics card in your PC.  The processor and memory in your PC are more than sufficient for most use. I suggest that you look for a NVIDIA GTX 660 for around $226 new on Amazon. You can find the GTX 660 on eBAY for a lot less.  You will also need to replace the power supply. The Corsair CX650m should be around $55 after rebate.    

2 more replies
Answer Match 43.26%

Hello, i have an HP Touchsmart 520-1030, and i wish to upgrade it with i3-3225 processor that i own. Tried to replace it with mine i3-2120, but pc just does not boot. Any way to upgrade bios to support ivy bridge processors? For now i have latest bios 7.12. I see the only difference between models that support ivy and not, is MB name Lavaca3SB[supports ivy] and LavacaSB[does not]. Is it the same mb and i can install Lavaca3SB's bios to mine LavacaSB board or this will not work that way?

More replies
Answer Match 43.26%

I noticed my wireless 1030 is acting strange after getting BSOD(not the cause of Wireless but it was solved)and now I'm experiencing some problems, here are the issue. I'm worried if it is the NIC card

1.like it takes a while to connect to a certain webpage then whenI looked up on Event viewer it stated in the lines of Google too long to respond DNS

2. sometimes the wireless would switch off by itself and when I try to reconnect to my home router it says "Cannot find my router* yet I can see it shows my wireless router is available then when I look up event viewer it states " NETBIOS over TCPIP has entered Stop state".

I would have to click on

*Troubleshoot Problems which then would let me reconnect back in the router*

3. I have been getting this new event viewer error 5060:
The description for Event ID 5060 from source NETwNs64 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\NDMP32
Intel(R) Centrino(R) Wireless-N 1030
I can see my network information by typing ipconfig/all BUT recently I performed a Intel? PROSet/Wireless Software Manual Diagnostics Tool and it failed on "Radio ON test" yet my wifi switch was ON. I... Read more

A:I'm having wireless Issues with the Intel 1030,Turning off by itself

It almost sounds like a nic driver issue. Have you updated it recently? Try to update, or roll-back if update did not work.
Replacing your nic should not be to hard depending on your device. Usually the nic is the easiest of the add-on boards to get to. But, I really don't think it's the nic. Were you changing, installing, updating anything with your hardware, operating system when this happened? If driver update/rollback doesn't work, try a system restore if feasible.

4 more replies
Answer Match 42.42%

Hello,

I'm having a strange problem. Intel released new drivers to update from version 15.11 to 16.11. I downloaded them from Intel website, ran install, success. When I go into Device Manager to check on the driver version, I see it is still 15.11. I have tried a number of things, including deleting the drivers from the Device Manager and running the install again. However, in this case Windows 8 automatically installs even older drivers, version 14, dated 2011. I'd like to try the new drivers because it takes very long for the net to comeback after I wake up my laptop. Version 15.11 was installed by Windows Update, those drivers are dated January 2014.

A:Drivers update for Intel Centrino Wireless-N 1030

Just disable allowing Windows to automatically install drivers.

8 more replies
Answer Match 42.42%

I need to upgrade my wifi card from the intel Centrino Wireless-N 1030.  I checked the manual and it says a cards i can use, but then i see that card won't work on hp.  Can someone please tell me the exact card I can use that is an upgrade from the 1030 as all that wifi card has done is give me issues.  My laptop is a hp pavilion dv7-6c60us.  The OS is windows 7 64bit.  This whitelist crap makes everything a pain in the butt!!! 

A:I need to replace my intel Centrino Wireless-N 1030 wifi car...

Hi, Your machine was built before second half of 2014 therefore the chance to upgrade wireless card is very slim to none. There is a list on pp 6 and 7 of the following manual:           http://h10032.www1.hp.com/ctg/Manual/c03099448.pdf You can use USB wireless adapter, this will cost you one USB port       http://www.officeworks.com.au/shop/officeworks/c/technology/networking/wireless-usb-adapters     (Note: much cheaper from other countries). Regards.

1 more replies
Answer Match 42.42%

I used a copy of windows 7 professional to wipe the system because I was giving it away. I have the operating system up but can not access the network card to access the internet. I've downloaded the drivers on the software page but get the message that the file is not compatible with the system. I see the recovery disk I can order, but was hoping to find an image of the recovery disk that I can download and burn to a disk myself. Overnight ordering still has a statement about it taking 2 days to process first. Is there another area online that I can get the recovery disk downloaded? Serial number: 3CR2160C7B Thanks in advance.  

More replies
Answer Match 42.42%

Hi!!

I get an error message on 2 machines in my domain.

domain: 3 windows 2003 servers.
1 server: DC
2/3 servers: on this I get the error. the both servers are set as member servers.
how I can fix the error on the both machines?

Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1030
Date: 22.09.2003
Time: 10:13:48
User: GICIOLAND\gicio
Computer: JAMESBROWN
Description:
Windows cannot query for the list of Group Policy objects. Check the event log for possible messages previously logged by the policy engine that describes the reason for this.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

regards,
gicio
 

More replies
Answer Match 42.42%

Hello,

I sent my computer in for repairs a while back and now the wireless card won't work. It can't find any signals unless I plug in the one from my desktop. I went to computer/properties/device manager and saw that the wireless card (Intel (R) Centrino (R) Wireless-N 1030) has a yellow "!" next to it. The properties tab says, "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)".

I have tried searching for new drivers automatically but it says they are up to date. I downloaded the latest drivers directly from Intel and tried to manually update them but it said that the drivers are up to date again. This problem occurs whenever I update my computer. I did a system restore and it worked fine for about a month, but once it updated it did the same thing again. There is no restore point to go to this time, so I'm stuck.

Anyone know what I should do?

Thanks

More replies
Answer Match 42.42%

After recovering this system, I went to the HP site to download drivers for it.  The message I received is that there are no drivers for this model running that OS.  I am confused since the original OS on this system was 7.

A:How to download drivers for Model 320-1030 running Windows 7

@BocaRay?, welcome to the forum. Here are the Software and Drivers Downloads for the computer for Win 7.  If you haven't done so, you should run HP and Windows Updates, also.  You should use HP Support Assistant to check for HP updates.  The latest version of HPSA is here. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

1 more replies
Answer Match 42.42%

I have a relatively new (few months) laptop of my own running Win7 x64 with an "Intel Centrino Wireless-N 1030" wireless network adapter. For some reason, I have serious problems connecting to most wireless networks. On my home network there are rarely problems, but when I attempt to any other network (college, or public hotspot, or neighbor's open wireless) there are often issues.

By "issues" I mean: when I first attempt to connect to the network in question, I'm usually able to connect to the first few sites I try to access, but usually after a second or a minute or a few minutes of normal connectivity, I'm suddenly unable to access anything. The browser's response is that DNS lookup has failed; when I record an IP address (via ping-command prompt) and type it in manually after this point, the browser's response is that "##.##..." is taking too long to respond, etc..." No other program is able to connect either. I have tried setting different DNS servers but it has had no visible effect. At this point, the only thing I can do to reconnect is to either wait a long time for the connection to reestablish itself (which can take an hour or more and isn't guaranteed) or to go to Device Manager and disable and reenable the wireless adapter, which then *sometimes* allows me to reconnect for a few seconds or a minute or an hour before connectivity breaks again. When the connection fails, Windows displays the computer ... Read more

A:Unreliable connectivity - Intel Centrino Wireless-N 1030

I had the same issue too. My GF's laptop has a 1030 wireless NIC and it had all sorts of issues connecting to the APs in my house. It would work fine with her Linksys wireless router and my Sprint MiFi. But had connectivity/performance problems when connecting to either of my Netgear APs (WG102 and WNDAP350) along with my PC W 620 wireless controller with AP 105 and AP 125 access points. Updating the drivers helped the problem somewhat, but we were still experiencing dropped packets or extremely high latency when connected. Upon a suggestion from one of my coworkers, I tried adjusting the performance/power settings in Windows and that seemed to have fixed the problem. The laptop has been running fine ever since.
 

1 more replies
Answer Match 42.42%

I am running a Vista x 64 client with a SBS2003 server. There are now real critical issues, but there are some logon and logoff anomalies.

I consistently receive events 1030 and 40961 at Logon. I will post details in subsequent entries.

Also, Logoff usually takes a very long time (like more than 15 minutes).

A:Event ID 1030 and 40961 at Logon, Slow Logoff

Example event 40961:

The Security System could not establish a secured connection with the server [email protected] No authentication protocol was available.

- System

- Provider

[ Name] LsaSrv

- EventID 40961

[ Qualifiers] 32768

Level 3

Task 3

Keywords 0x80000000000000

- TimeCreated

[ SystemTime] 2010-10-27T23:19:24.000Z

EventRecordID 156192

Channel System

Computer IPS-091.Dimond.local

Security


- EventData

[email protected]
03030980

3 more replies
Answer Match 42.42%

 Hello, Wireless functionality was lost on my HP Pavillion dv7t-6c00 laptop when I upgraded to Windows 10. Here's what I have in my laptop now: Manufacturer: Intel CorporationDescription: Intel(R) Centrino(R) Wireless-N 1030Driver version: 15.11.0.8 I've read some support threads on this topic and it seems that this wireless card is not supported by Intel in Windows 10. I've also read that one suggestion is to replace the wireless card with an Intel Advanced-N 6230 wireless card. I tried to replace the wireless card prior to upgrading to Windows 10 with an Intel Advanced-N 6230 wireless card but the wireless card I purchased seemed incompatible with the laptop, as it gave me a Halted screen when I started up the laptop.  So my frustration is I would gladly and easily replace the wireless card but I can't keep purchasing cards that are incompatible with the laptop. What are my options?  Is there a specific/guarenteed HP Laptop compatible part number that I can purchase?   Even better, is there a link to where I can purchase a card that will definitely work? Thank you ver much,Chris  

More replies
Answer Match 42.42%

This card supports 802.11n. Obviously... it's right in the name, plus device manager>network adapters>Intel Centrino>Advanced tab clearly shows n enabled.

But can anyone take a second to tell me, if you know, why when I run the command netsh wlan show drivers, "radio types supported" shows only b and g, and NOT 802.11n ??? Confusing to me.

A:Intel Centrino Wireless-N 1030, CMD prompt question

that is odd but if your connected using N and your drivers are up to date i wouldn't worry about it.

1 more replies
Answer Match 42.42%

Can some Tech Guru tell me if its safe to use the system backup cleaner.? It found 1.8 GB to be cleaned. What to do..???
 

A:Quihoo 360 Total Security 6.2.0.1030 Sys Backup Cleaner

yes it is safe.

i removed 6 GB system backup files myself.
 

9 more replies
Answer Match 42%

I turned on my computer today and the computer says Error: No boot disk has been detected or the disk has failed. What do I do to fix this.

More replies
Answer Match 42%

Hi,

Application event viewer notification keep showing this error. Kindly advise.

Event ID: 1030
Source : Userenv
User NT Authority\System
Decription: Windows cannot query for the list of group policy object. Check the event log for possible messages previously logged by the policy engine tha tdescribes the reason fo this

Event ID: 1030
Source : Userenv
User NT Authority\System
Description: Windows cannot access the file gpt.ini for GPO CN=(31B2F340-016D-11D2-945f-00c04FB84F9,CN=Policies,CN=System,DC=mscmsia,DC=com. hte file must be present at the location <\\mscmsia.com\sysvol\mscmsia.com\Policies\{31BF340-016D2-945F-00C04FB984F9}\gpt.ini>.(Access is denied). Grpoup Policy processing aborted.


Thank you.
 

More replies
Answer Match 38.22%

I saw some people having trouble with extremely slow wireless connections using an Intel Centrino Wireless n-1030 card. The original thread is closed, so the problem may already be solved, but if anyone is still experiencing this problem, here is what worked for me:

This NIC is a dual band card (802.11 + bluetooth), and with some routers having the bluetooth enabled really slowed down the 802.11n connection (it didn't seem to happen with my netgear router, but when I switched to linksys, WHAMMO!).

Anyway, when I disabled the Bluetooth adapter in Device Manager the problem was completely solved (uhhhh except I need to use a dongle to make my bluetooth mouse work now... small price to pay IMO)

Anyway, just thought I'd share my experience. Hope it can help someone.
 

More replies
Answer Match 30.66%

Currently Upgraded From Windows Xp to Vista 64Bit Currently Have sp2.

I did this as I bought this pc and wante'd to upgraded it.
After upgrading i have a folder called Windows.Old

I have currently delete every folder i can Except One " user Data "

Which contains To files

ЃϵϳЅЂϿϽϯІχϯπρϴϱЄϱЃϵϳЅ and

ЃϵϳЅЂϿϽϯІχϯπρЂϻϵЉЃϵϳЅ


Currently have Tried
Disk Clean Up = No Effect
Safe Mode Boot Up and Delete = Same error Code

I renamed the folder now to " lol " no specific reason to try and delete same error message.

" This is no longer Located in C:\Test. Verify The items location.
When tring to removed the selected " LOL " folder containng the two folders.

I did some research/ Alot of research and still have no effect please help me.

A:Currently Upgraded from Xp to Vista 64 Can't Delte Files ЃϵϳЅЂϿϽϯІχϯπρϴϱЄϱЃϵϳЅ

Hi and welcome to TSF this may help http://www.vista4beginners.com/Chang...take-ownership

4 more replies
Answer Match 28.56%

AIM 6.5 Upgrade causes media to no longer play on versions of Vista DO NOT UPGRADE...the cause of media no longer playing on Windows Media Player and iTunes and all other media players was linked on my PC to the download and installation of AIM 6.5. It also caused my network icon in my system tray show i was no longer connected to a network, and it was an unknown network.

To fix these problems use the system restore program that Vista comes with and restore your PC to a saved version before your installation of AIM 6.5.

Hopefully this helps everyone having these problems.

Note: Aim will no longer work after doing system restore, so you have to re-install in, and if you dont have the install package for 6.0 saved somewhere on your computer do not re-install 6.5, go to the aim site and look for the classic version 5.9.
 

A:AIM 6.5 Upgrade causes media to no longer play on versions of Vista DO NOT UPGRADE

7 more replies
Answer Match 28.56%

I am trying to prep a computer to give to a friend. Last night, I reformatted it using the recovery discs that came with it. It is a Tosh Satellite A105.

Today, I have been finding and installing updates to the system, trying to prepare it for an upgrade to win7, which is no easy task since I have had to go out and find some of the drivers and service pack 3.

I am using the Windows 7 Upgrade Advisor, and need input on which of these 11 issues really are issues, and which I can skip and just install new once I upgrade.

Adobe issues -- I uninstalled it.

Toshiba Blue Tooth Stack for xp version 4.0 -- I downloaded and installed version 7.0, but have not uninstalled 4.0. It doesn't make sense to my feeble brain why I would have to uninstall 4.0 if I installed 7.0 unless it is because I downloaded the 7.0 instead of upgrading to it?

Here is a list of the rest:
MS .NET Framework 1.1 --I downloaded and installed a later version, so which version do I need to find?

Toshiba ConFigFree -- No clue what this is.

Intel ProSet/Wireless software -- ZeroCfgSvc Application -- No clue

Toshiba Utilities -- I have updated everything available from ms, so is this another one that I have to go find, and if so, what version?

To be uninstalled unless someone suggests otherwise:
Messenger
Realplayer
Realtek HD audio driver
Sonic Record now
Yahoo music engine

Thanks a bunch in advance for any help!

A:XP to windows 7 upgrade incompatibility issues caught by Upgrade Advis

1st, you can't upgrade from XP to Windows 7, you have to do a Clean Install which means boot the DVD and format the drive, so nothing you do to XP will have any effect.

Having said that, you can cheat

See here: Upgrade Install - XP to Windows 7

My recommendation would be to do an image backup of the XP system then do a Clean Install (with format), apply all updates then start restoring your data from the backup. All software will have to be reinstalled, it can't be copied from the backup to Win 7.

Good tutorials here:

Clean Install Windows 7
Clean Install with a Upgrade Windows 7 Version

3 more replies
Answer Match 28.56%

I have got myself into a bit of a mess.

I installed my version of windows starter on my mom's PC which was previously running vista. To see if it improved the performance or if the laptop itself was rubbish. It did so I purchased an upgrade to windows home premium. When I enter the upgrade key it says I need the current key is invalid for upgrade and that I need to phone a number. Does this mean the software I brought is useless. I didn't want to buy a disc as I had read that using a upgrade key meant everything was kept. Is there anyway I can use the software I've brought. The computer recognises the key as an upgrade one.
Thanks.

A:Windows upgrade starter to premium current key not valid for upgrade

Quote:
I installed my version of windows starter on my mom's PC which was previously running vista.


You can not use the Windows Starter from your Notebook on your mother PC.
Doing so would be a invalid upgrade.

9 more replies
Answer Match 28.56%

I'm trying to find out the easiest way to go about upgrading from Windows 7 Home Premium (64 bit) to Windows 7 Ultimate (64 bit) and what issues I might run into.

I don't want to reinstall everything (Or anything if possible) so am looking for the easiest option to upgrade.

Anytime upgrade offers the upgrade at $139, a bit expensive.

I found a seller on ebay selling "Microsoft Windows 7 Ultimate 64-Bit Full Digital Download Key " for a lot less (He has about 1500 feedback at 100%)
My question is, can I use the key from this and enter it into the 'Enter an upgrade key' box during the Anytime Upgrade? Will I run into problems doing this?

Alternatively, I could get a copy of Ultimate from Digital River, burn it to a disk or thumb drive, use the key from the ebay seller above and try to do an 'upgrade' install over the top of my current Windows 7 Home Premium install (I don't know if this is even possible?)

Any suggestions are welcome.

Thanks!

A:Upgrade to Ultimate from Home Premium - Anytime Upgrade or reinstall?

The best way for any install is ALWAYS a clean install. Believe me you will have less problems and headaches than an upgrade. It would be worth your while to reinstall your software.

3 more replies
Answer Match 28.56%

first time upgrade windows phone lumia 640 xl to windows 10 mobile after 9 th august can i received anniversary update version?

More replies
Answer Match 28.56%

To avoid the Student Win 7 hassle (upgrading Vista 32 to Win 7 Pro 64 bit ISO burn, etc), can I simply use the Home Prem 32 Upgrade (for my other computer) arriving this afternoon with my 64bit Pro upgrade key & end up with the 64bit Pro installation?

Thanks.

A:Win7 Pro 64bit Upgrade Key w/ Prem 32bit Upgrade Disk

No... you can only update to the same version that you have installed... Home to Home... etc.

9 more replies
Answer Match 28.56%

AIM 6.5 Upgrade causes media to no longer play on versions of Vista DO NOT UPGRADE...the cause of media no longer playing on Windows Media Player and iTunes and all other media players was linked on my PC to the download and installation of AIM 6.5. It also caused my network icon in my system tray show i was no longer connected to a network, and it was an unknown network.

To fix these problems use the system restore program that Vista comes with and restore your PC to a saved version before your installation of AIM 6.5.

Hopefully this helps everyone having these problems.

Note: Aim will no longer work after doing system restore, so you have to re-install in, and if you dont have the install package for 6.0 saved somewhere on your computer do not re-install 6.5, go to the aim site and look for the classic version 5.9.
 

More replies
Answer Match 28.56%

Hi everyone....

Current PC specs listed above ..... to get it out of the way I am a gamer......

This upgrade is to allow me to play some of the newer games such as The Witcher and also to enable me to utilize DX10 when I eventually upgrade to Vista.

RAM.....this is what I have found...I do not overclock and I am very happy with the matched pair of Corasir XMS 512MB 5400C4 running at 533 that I currently have so I figured the safe bet is in just jumping to a matched pair of 1MB sticks of the same.....
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145015

Graphics card.....

I do have a budget and from the reviews I have read this card should carry me through the gaming world for at least the next year (hopefully 2) I like eVGA and I have nothing but good things to say about the eVGA 6800GS that I am currently using.

But if anyone has some input as to problems with the card listed below or if you know of another card that will perform just as well (or better) for around the same price I would like to hear about it.
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130317

Thanks in advance for any help.......
 

A:Time to upgrade.. input on these..graphics card / RAM upgrade choices??

16 more replies
Answer Match 28.56%

I have a home built ASUS A7N8X2 Deluxe MoBo with an AMD Athlon XP 2800+ CPU. I upgraded Win XP Pro to VISTA Ultimate with no problems other than upgrading a few drivers. It went smoothly. At the time I had 1 GB in one of 3 available slots. I attempted to add 2 GB more to occupy all 3 slots. This produced a reboot after POST as VISTA started. I rotated the the modules through all slots and finally realized that when I went beyond 2 GB it produced a reboot. During post it tests 3 GB and the BIOS displays 3 GB. I have 512MB of RAM on the video card. Any suggestions ?? I am running the latest BIOS and if I remove one GB the machine boots and runs great... ???? Ron
 

A:VISTA Ultimate Upgrade Reboots with Memory Upgrade to 3 GB

16 more replies
Answer Match 28.56%

Hi All,
I have a lot of programs and data so I recently upgraded my Windows XP SP3 setup to Windows Vista for Business with the intent of upgrading all the way up to Win 7 and Win 10, but I cannot get Windows Vista SP1 to upgrade.  I have tried many ways including
all of the fixits, through Windows update and through the stand alone.  I have also tried all of these steps, all to no avail:
You can't install updates in Windows Vista, Windows 7, Windows Server 2008, or Windows Server 2008 R2: KB 2509997
You receive a "0x80246002" error code when you use the Windows Update or Microsoft Update Web sites to install updates: KB958056

Error message when you try to install updates from the Windows Update or Microsoft Update Web site: "0x8024000B": KB958040
Error message when you try to upgrade Windows Vista to a more advanced version of Windows Vista: "Windows could not configure one or more system components To install Windows, restart the computer and then restart the installation": KB 946078
In Windows Update, it says successful installation sometimes, but then just keeps offering the Vista SP1 update.  Please help!
Thanks very much.  I have my CBS.log and Windowsupdate.log and I can post, but don't see how to do that.   Barry

More replies
Answer Match 28.56%

I'm about to buy a new laptop from Costco with Win 7 Home Premium. On my old (now smashed) laptop I have a Win 7 Ultimate install. Can I just use the Ultimate serial key to do the Anytime Upgrade on the new machine? I keep reading that I need to buy an "upgrade key."

Thanks

A:Windows 7 Anytime Upgrade with non-upgrade Ultimate license?

Hi,
You will need an upgrade key to initiate the ultimate download, but if you can manage to obtain an ultimate installation cd your serial should work, also if you use this winisoutils - Windows ISO Disc Image Utilities

you can change a windows install cd (if you have one) into a universal edition one, very handy.

to answer your question an upgrade key is not the same as a serial, the upgrade key is just to download the installation while the serial activates it, and a serial from one edition will not work with a different edition.

hope this helps

3 more replies
Answer Match 28.56%

Thanks in advance for your help.

I have other posts on my VISTA reinstall problems but I'll make it short to say I had to reinstall my OS. Knowing I had to reinstall Office, I also installed Works 9.0 that came with computer (Dell). Now, that is exactly what was installed before when I installed the Office 2007 just fine the first time (pre-reinstall of VISTA).

However, now when I go to install Office, it tells me it can't find a required upgrade product. On the box Works 9 is listed as an eligible product and that is what I have installed. It gives me an option to browse to the folder where it is installed but I've tried and don't quite know where to point it to find what it wants. Works seems to be in many folders.

Does anyone know what I can do? I don't have internet on that specific computer right now because of the VISTA reinstall issues (see other post) has created an issue with all the network drivers.
 

A:Can't install Office Upgrade...Why? I have listed upgrade product.

Have you started up your copy of Works to see if it functions?
 

1 more replies
Answer Match 28.56%

We have a Satellite Pro A300-2C4 (purchased 23/11/09) which came with Vista Business 32Bit installed but was downgraded (using disk provided) to Windows XP because of business network requirements.

When Windows 7 became available I purchased the Windows 7 upgrade DVD that Toshiba were offering so that if the Business decided to upgrade to the new operating system we could do so on this laptop.

This is what I have recently tried to do to discover it cannot be done as the DVD is for Win Vista Bus to Win 7 Pro upgrade.What is the best way to do the upgrade without having to purchase another upgrade disk. I do have a set of Recovery Discs for another Toshiba SatellitePro A300-2C4 which was purchased about 2 months before this one; these were created using the Toshiba Recovery software before any changes were made on the laprop. Would I be able to recover the system to its Windows Vista state using these discs and then use the Windows 7 Professional Upgrade DVD to do the upgarde?

Any suggestions or recommendations would be greatly received.

A:Re: Satellite Pro A300-2C4 'Windows 7 Professional Upgrade DVD' to upgrade

Hi TKG

Upgrading from WinXP to Win7 is not supported by Toshiba nor by Microsoft.
The only possible way to upgrade (go from 1 installation with some data to Win7 and keeping your settings and data) is from WinVista SP1 or later.

So regardless of how You look at it, You need to get XP out and either begin with WinVista factory installation + any 1 million updates that were released after this, OR
you can boot up from the Win7 media directly and install clean.
The second method saves a lot of time BUT have some negative side effects - namely not all drivers and utilities will be available in the final system if installed clean.
Some packages from WinVista works well in Win7 and are for that reason expected to be in the system during the update.
Hence, if You do a clean install, they will be missing.

However, they might not cause any trouble for You if they are not there, but that is not known until You're there and can see what You are missing.
Basic functionality should be expected though (WLAN, LAN, Sound, video....so on)

So, think about what You want to do and get busy with either recovering your unit with the WinVista set, updating, and then running the Toshiba Upgrade DVD, Win 7 upgrade and finally the Toshiba upgrade DVD again, OR just install Win7 clean + adding as much as possible / needed from the Toshiba Upgrade DVD.

Good luck!

4 more replies
Answer Match 28.56%

HELP!

I actuall have two problems. Firstly, I had been having the worst problems with my mouse which lead to me to thinking that I should reinstall win 2k with the possiblity that this would solve everything.

The mouse is sticking and it takes 2-3 clicks to get it activated again. Then when it is idle it seems to pull to the top or side or bottom of the page on its own. I have cleaned the ball, tried another mouse and uninstalled all the sp 3 upgrades I had done. It also happens when I go into WinMe which lead me to believe that it is not a win2k prob but thought I would give it a try anyway.

I installed the win2k cd and choose upgrade.

WELL.... it now says that:

"Setup cannot locate the Windows installation you want to upgrade. Contact your system administrator"

I cannot get back to windows 2k as it keeps trying to install upgrade. I am using Partition Magic Dual Boot and if I could get back to my drive c (the duel boot now makes drive f drive c) I could at least backup the important stuff.

I would appreciate any help to get out of this situation.

Looking forward to any and all replies.

Thanks in advance.
 

More replies
Answer Match 28.56%

I have a copy of MS Office Professional 2003 that has been installed and working fine for 2 years. Now (perhaps as a result of a Microsoft update ?) I am told that it is not genuine and will fail to work in 10 days. The invalidity is confirmed at http://www.microsoft.com/Genuine/ It seems this is part of a bunch of product keys that purport to be one in a series of a volume licence but were really stolen.

Do I need to buy a full retail edtion of Office Professional 2007 or will an upgrade version be acceptable to the activation code ?
 

A:Will an upgrade version of MS Office see a hookey one as a qualification for upgrade

If you purchased this as a legal, retail version, then contact Microsoft about the false notification.
 

3 more replies
Answer Match 28.56%

i've been playing world of warcraft for about a month now and i have it on the lowest possible settings and at800x600 resolution and i'm still getting like 20 fps i want to up the settings on the game to good instead of low and have about atleast 30 fps in raids with 25 other players and when i'm alone questing have like 50 to 60
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
System Manufacturer Hewlett-Packard
System Model p6754y
System Type x64-based PC
Processor AMD Athlon(tm) II X4 640 Processor, 3000 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 6.04, 9/7/2010
SMBIOS Version 2.6
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.75 GB
Available Physical Memory 893 MB
Total Virtual Memory 7.50 GB
Available Virtual Memory 3.95 GB
I have a radeon hd 4200
so i want to upgrade it to be able to play with atleast 30 fps but i want to spend as little as i can 170 max for both and the less i spend the better if anyone can help would be great
 

A:Graphics card upgrade and power supply upgrade

16 more replies
Answer Match 28.56%

I installed Win 8 RC Build 8400 over Win 7 on my "experimental" spare laptop. I have seen web posts that you cannot directly upgrade Win 8 RC to Win 8 RTM, without going through some special steps and modifying one of the install files.

My question is is if I purchase WIN 8 Pro on Oct 26 will I be able to easily upgrade to it from my RC Build, preserving setting and apps, or will I have to basically do a clean install or some some "special steps" as in the RTM case to accomplish an upgrade of RC 8400? And by apps I am referring to my installed programs, like Office, Photoshop, Quicken, and tons of other programs I have installed.

Just looking ahead to how much work I might be facing later this month.......... If I cannot do an easy upgrade install of Win 8 Pro over my RC Build, maybe I will just bag it and forego Win 8 and go back and do a clean install of my Win 7 media. Hopefully I have better choices.

A:Looking Ahead to Upgrade... Can I Upgrade RC Build and Preserve Apps?

I think so, just click Upgrade on the installation process and everything will be intact. Anyway, if you upgrade to Windows 8 RTM and all apps from RC are gone (like what you get from a clean install), you can just sign in on your Windows Live account and re-download all your apps from "my apps" page in the Microsoft Store, though the settings that you had for RC won't get imported.

3 more replies
Answer Match 28.56%

Since Windows 10 was announced that it will be free for Windows 7 and 8.1 users, that got me hyped up. There are many things I've found about Windows 10 that makes me want to have it such as DirectX 12 and Windows Aero (one of the reasons why I love Windows 7). I signed up to the Windows Insider Program and got a slow but interesting feel of the Windows 10 Preview on VMWare Player and now I'm ready for the real thing! I reserved the upgrade for Windows 10 when it comes on July 29th just to be ready.

Only problem, its August and I haven't been given a message that says Windows 10 is ready to install.

Now I've read that when Windows 10 was released on the day of its launch, that the Microsoft servers have been running at their limits since a lot of people have waited the day and received their Windows 10 upgrade. I've googled some forums as well to find any other problems associated with the Windows 10 upgrade but none of them matched my description. I have the Windows logo notification on the taskbar, it just hasn't told me that Windows 10 is ready to install.

Now I'm not saying that this is taking too long and I want Windows 10 now, I'm only just a little nervous about how long this keeps up. I really hope that this doesn't drag on all the way till next year when the free upgrade option has expired, but this isn't much of a concern. I've heard of a Windows 10 Media Creation Tool and I have downloaded it but I decided not to install Windows 10 this as I have school an... Read more

A:Windows 10 Upgrade Notification: No upgrade ready message

Hi,
Well 10 does have some aspects of aero = windows snap... but it does not have windows glass
What it does have is opacity which unfortunately they did not give a slider to control the amount of opacity

Windows 10 - Upgrade Installation - Windows 10 Forums

1 more replies
Answer Match 28.56%

I recently obtained an upgrade for Vista Ultimate (I'm currently running Vista Home Premium), dated 2007. According to the upgrade chart, it's supposed to be perfectly fine to upgrade from Home Premium to Ultimate. However, I get past the product key dialog and the next one indicates that my system is not capable of taking an upgrade, but can perform a clean install. Strange.

I went on-line and ran into a blitz of different answers to this problem, but finally found something that might look like the reason:






Q. Could this problem be occuring because I have Vista Home Premium SP2 applied, and my Ultimate Anytime Upgrade only includes SP1?
A. Yes. you would need to uninstall the Windows Vista SP2 and then upgrade to Windows Vista Ultimate.
Note: An upgrade always begins at the desktop. After uninstalling Windows Vista SP2, boot to the Windows Vista Home Premium desktop, then insert the Windows Vista Ultimate upgrade DVD disc in the DVD drive.



Is this right? Do I need to roll back SP2 in order to do the upgrade to Ultimate, then re-apply SP2 once it completes?
Also, side note question: I entered my product key and then the installation type dialog came up next after a few moments. Does this mean my product key passed the validation? I just want to be sure that my product will activate, as I bought this 2nd hand and was assured that it wasn't activated.

A:Ultimate Upgrade won't upgrade--only Clean Install option given

I am not going to answer your question, directly, but will say that a clean install is always better. Go with the clean install. You do not save time with an upgrade if you take into account the multitude of problems that may occur.
Back up your stuff, use Windows Easy Transfer and all you need to do is reinstall your software and you have the very best installatio, a clean install.
Enter your key after you have used the system for a few days, your software is all installed and you are satisfied, you have 30 days, which can be extended.
Clean Install From Upgrade Vista
Would you want your old car after being detailed or a brand new 2012 car, it works the same with the OS.
If you choose not to use my advice, you need to have SP1 with an SP1 install.

3 more replies
Answer Match 28.56%

I am planning to upgrade to WinXP Pro soon but I seem to have run into a problem. I plan on upgrading as opposed to full install because I can purchase WinXP Pro Upgrade from school for $25 (full version not available unfortunately). So, to make sure that none of my software or hardware will create an problem in the upgrade, I ran Microsoft XP Upgrade Advisor. The Upgrade Advisor is telling me that my version of Win98 is not supported for upgrade. The exact message is as follows:

Blocking Issues

Unsupported Operating System Version
The version of Windows running is not supported. Setup can only upgrade
official releases. Setup will now exit.(the last part of course being the text message I would presumably receive if I were to attempt an upgrade)

See attachment for full Upgrade Advisor report.

For one I would like to know why Upgrade Advisor is telling me that Win98 on my machine is not supported. Could it be because I originally loaded Win95 and upgraded to Win98?

Also, I would like opinions on wether or not this will actually prevent me from upgrading. Especially if you have run into this problem.

Thanks for any advice.
 

A:Windows XP Upgrade Advisor Says Win98 not supported for upgrade.

That would be my guess that it will not upgrade an upgrade. That's what I thought when I read "official releases" in the log file.
 

1 more replies
Answer Match 28.56%

I bought a Win 7 Professional upgrade disk at retail and want to use it to upgrade a new computer that has Win 7 Home Professional installed. The installation stopped and I was directed to use Windows Anytime Upgrade to do the job. Microsoft expects me to purchase a key in order to perform the upgrade. Can I ignore this and use the disk I have? If so, what's the procedure?

A:Upgrade Win 7 home prem to professional using upgrade disk

Welcome!

You should be able to use Anytime Upgrade to do that...just give it the product key on the Upgrade package.

You will not be able to do an in-place upgrade from the disc, to the best of my knowledge.

If you would prefer to do a clean install, try this tutorial: Clean Install with a Upgrade Windows 7 Version

9 more replies
Answer Match 28.56%
A:if i upgrade lumia 640 xl via upgrade advisor app which build are download?

Hi, 10586.494 will be downloaded (although it will probably come in 2 parts, .007 first and then .494)

2 more replies
Answer Match 28.56%

Like the title said, I'm getting random BSOD after upgrading to SSD and RAM.
Initially I thought it was the Intel Rapid Technology, because the system improved after I've installed. But now it still BSOD, but less frequent.

Here are my dump files and jcgriff2 files

Minidump.7z

Windows7_Vista_jcgriff2.7z

Edit: Sorry I didn't put my CPU config, silly me.
Asus u46SV
Intel Core i5-2410M
2 x 4GB Corsair Value Select Ram (NEW+NEW)
GeForce GT 540M
OCZ Vertex 4 128GB firmware v1.5 (Latest+NEW)

A:BSOD After SSD upgrade and Ram upgrade in Laptop. Mostly IRQL errors

Welcome
Have you updated to the latest firmware for your SSD?






Quote:
STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL
Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner,
Backup tool, compatibility

STOP 0x0000004E: PFN_LIST_CORRUPT
Usual causes: Device driver, memory

STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes: Defective hardware (particularly memory - but not just RAM),
Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS


Suggestions:

Kaspersky does cause BSoDs. Please uninstall it and use Microsoft Security Essentials (at least to test)

Free up your start-up, keep nothing except the antivirus
→ Startup Programs - Change

Take memtest. Run for 4/5 passes
→ RAM - Test with Memtest86+

Run Disk Check for file system errors and bad sectors on it
→ Disk Check

Let us know the results

4 more replies
Answer Match 28.56%

Hi Guys, Is there any way to upgrade from HDD to SSD in HP Pavillion n012tx? I also wanted to change the stock keyboard to a backlit keyboard. This changes will improve the longevity of my laptop for about a year or two I guess. Any help will be appreciated, I will be sad if the forum ignores though. Love for all.  Thanks Arghya  

More replies
Answer Match 28.56%

We are attempting to upgrade our version of HP Device Manager from version 4.6 to version 4.7,  however it always fails on the upgrade database portion of the install.  It does not give me any reason for the fail,  just a dialog bos that says "Upgrade Failed" I have also tried creating a new database and then importing the old database into the new database,  but this also fails.   Any ideas?  Is there some logs with more details somewhere that I am missing?  Cant troubleshoot much with just "Upgrade Failed" heres the installer log output output: 6-23-2016 11:00:51 | INFO | Start HPDM installation/uninstallation...6-23-2016 11:00:51 | INFO | No command-line parameters is set. Install HPDM with interactive UI.6-23-2016 11:00:51 | INFO | Successfully execute: C:\Users\KAREEF~1.HUG\AppData\Local\Temp\2\{13FC33E7-9CF8-4B19-9397-735CE3F2778F}\QueryLogonUser.cmd6-23-2016 11:00:51 | INFO | Install HPDM...6-23-2016 11:00:51 | INFO | A previous HPDM exists in the machine.8-8-2016 13:42:20 | INFO | Start HPDM installation/uninstallation...8-8-2016 13:42:20 | INFO | No command-line parameters is set. Install HPDM with interactive UI.8-8-2016 13:42:20 | INFO | Successfully execute: C:\Users\KAREEF~1.HUG\AppData\Local\Temp\1\{A6CDEC59-F949-4DCB-A2E7-590D1BED3A92}\QueryLogonUser.cmd8-8-2016 13:42:20 | INFO | Install HPDM...8-8-2016 13:42:20 | INFO | A previous HPDM exists in the machine.8-8-2016 13:43:11 | INFO | D:\hpdm8... Read more

More replies
Answer Match 28.56%

Yesterday, I clean-installed Windows 8 Pro x86 on an old Dell Vostro 1400 laptop which had been running Windows 7 Ultimate, and it activated and ran fine, without even a single exclamation point in Device Manager. I applied the update necessary to make the Store offer 8.1 and proceeded to install it as I've done on a couple other machines. After downloading the thing, it errored out with:

Couldn't install Windows 8.1

Contact your PC manufacturer to see if you can upgrade the System BIOS

When I clicked the OK button, it then gave me the informative and grammar-challenged error box:

Something happened and the Windows 8.1 couldn't be installed. Please try again. Error code: 0xc1900104

Try again Cancel

Ever the optimist, I clicked Try again, and of course, it proceeded to download all over again from scratch, only to error out in the same way. I then downloaded all the Windows 8 updates, although just the one had been necessary on my other machines that successfully upgraded to 8.1, and tried again, only to get the same result.

Today, I've discovered the Windows 8.1 Compatibility Assistant, which avoids the lengthy download of the upgrade every time (Microsoft, maybe you should run it implicitly before downloading 3 GB of transient data), and it tells me:

This PC doesn't meet system requirements

Contact your PC manufacturer to see if you can upgrade the System BIOS

Obviously, no BIOS updates are available, and I'm simply wondering if anyone knows what exactly is the pr... Read more

A:Windows 8 to 8.1 Upgrade failed - must upgrade System BIOS

Store upgrade is more hassle than it's worth...Can't see how bios version can prevent the upgrade...

If you can download a full ISO - try that rather.

8 more replies
Answer Match 27.72%

I want to upgrade my wifes netbook to Home Edition. Its running Windows 7 Starter. I know how to use the Anytime Upgrade, but I have a Family Pack Windows 7 Home Edition Upgrade Retail box/disc. I have only used one of the upgrades of the family pack. Can I use another to upgrade the Starter netbook, or do i have to by an Anytime upgrade? Seems like i should be able to, but it also seems like the upgrade is meant to be from just xp or vista, not a lower end window 7 version. Also, how would i do it if i can. Can i simply change the product key, or do i have to insert a disk and run the whole upgrade. If i do have to insert disk and run the upgrade, will i have to do a clean install? Plus while typing this i just realized her netbook doesnt have an optical drive....so what about that too?

Just want to get these questions answered before i even bother attempting it. I would hate to think i could just change the product key and go about my business.....cause thats never the case, and everything always turns into a few hours of work...

thanks for the help, and i just registered here because im getting back into windows. im mainly a mac, but i think im both now. so hello.

A:Upgrade from starter using a Home edition upgrade

Welcome to the forum,

You can just use one of the upgrade keys you have in Anytime Upgrade, no need for the disk.

It will just unlock all the features, reboot once or twice and you're there.


Windows Anytime Upgrade - How to

3 more replies
Answer Match 27.72%

Hi,

I have w7 pro 32 bit but need to take advantage of more memory so want to upgrade to ultimate 64 bit. I'm a student and have seen that I can get an upgrade to ultimate 64bit but it says that I cannot do this from w7 at all but can do it from vista business - as per below link

Windows 7 Ultimate: Microsoft Windows 7 Ultimate 64-bit edition

Do you know this to be the case? I have a vista busines recovery disc but am unsure if this will actually install the vista os on my notebook (I have all data that I need backed up on a USB removable hdd so not bothered if it's a clean install). I really need to do this legitimately as the reason I need to upgrade is so that I can install and run virtual machines to do a microsoft course (quite ironic) and would get found out immediately if I didn't choose the correct way to do it.

Any advise would be great - Thanks in advance

A:have w7 32bit but want to upgrade to w7 ult 7 64bit- upgrade path?

You can only do a 64 bit In-Place Upgrade from 64 bit Vista. You will need to do a clean install.
Clean Install with a Upgrade Windows 7 Version

Did the notebook come with Windows7?

2 more replies
Answer Match 27.72%

Want to upgrade Win 7 Home Premium 32bit to Pro 32bit so that, among other things, I can do backups to a network attached storage device. Anytime Upgrade tells me it is no longer available.
Home Premium was installed from a Reinstallation DVD for Dell PCs (I have a Dimension 5000) and I still have the DVD and product key from when I installed and registered it.
Is there still a way to upgrade (legally of course) or would I need to buy a Pro DVD (or download it) with a new product key and do a clean install?

More replies
Answer Match 27.72%

I have a Gigabyte Socket 775 motherboard with an AGP video card, and I want to upgrade to a system that has PCI express X 16 for a new video card. The thing is, I dont want to see my 2gb PC3200 dual channel kit go to waste because all the new motherboard are DDR2 only.

So is it too late to upgrade to 939? With the money saved without getting new memory for conroe boards or AM2, and the relativly inexpensive price for a 939 board, I can get a Athlon 64 X2 3800 for 939 which is much, much faster than my current cpu, and get PCIX16 video card support, all the things that I exactly want!
 

A:Budget upgrade: Upgrade to Core 2 motherboard, AM2 or 939?

Works For Me

Sounds like you have thought things out. If you want to save your DDR I (thats what it is called now) a socket 939 motherboard is the way to go. Still avaiable for the present, and socket 939 dual core processors are coming down in price. Just make sure your memory is compatiable with the new motherboard. You should be good for a while, although the future belongs to DDR II.
 

2 more replies
Answer Match 27.72%

I purchased an upgrade key from Microsoft last year and used it on my Win 7 home premium 64 bit installation and upgraded it to Win 7 pro 64. Lately, my system has gotten squirrelly and I wanted to
do the "upgrade" (repair) install from my CD. The system will not allow me to do this. It says that
Windows 7 Pro cannot be upgraded with Windows 7 Home Premium.

So now I'm stuck unless there's a way to uninstall the pro upgrade and revert back to home premium.
Is there a registry key I can delete or something so that it will work? I don't want to lose all the neat programs I have installed.

A:Can't upgrade install after running anytime upgrade

You are going to have to do a few registry tweaks to fool the Windows Installer in thinking you have the previous version. Once you have done so you can continue doing the upgrade repair process however you must do it while the machine is currently booted. (From the Desktop).


This link provides a good step by step process which you may want to try.

Please note that I have not completed these steps so please proceed with caution.

EDIT: I had to attach the link into a text document since the URL could not be copied.

Hope This Helps,
Josh! =]

8 more replies
Answer Match 27.72%

Hi, AllI try to upgrade the BIOS of my x1c gen3 20BS, and BIOS update utility for windows http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x1-... UEFI: 1.13 / ECP: 1.09I am working on windows 8I follow the utility's instruction and install the tool, run the tool, and reboot the OS, everything seem fine, but when I check the BIOS again, I found the BIOS vesion is still 1.10, but ECP upgrade to 1.09. I wonder why I cannot upgrade my BIOS, anyone could help, many thanks.

More replies
Answer Match 27.72%

Hi there, i have the upgrade for windows 7 home premium, a member of the household has recently brought a netbook which has windows 7 starter. I am wondering if i connect an external dvd drive to the netbook, if i can do an easy upgrade to home premium on this netbook?

thanks

A:Upgrade from Starter to Home Premium with Upgrade DVD?

You can do any Anytime Upgrade for which you just need a key, you dont need any disk or external dvd drive.

How to Upgrade Your Netbook to Windows 7 Home Premium - How-To Geek

Windows Anytime Upgrade - How to

2 more replies
Answer Match 27.72%

I have Toshiba x770-11c. Is it possible to install 16gb here?
What memory I need to buy (best choice)? and should I take my laptop to service or ram can be changed at home?

And the same question about ssd.
Best choice to buy and how to change at home?

I think it's time to upgrade our x770!

A:Qosmio X770 - RAM upgrade to 16GB + SSD upgrade

> I have Toshiba x770-11c. Is it possible to install 16gb here?
As far as I know you can use max 8GB RAM

> What memory I need to buy (best choice)?
DDR3 RAM (1.333 MHz)

> and should I take my laptop to service or ram can be changed at home?
RAM replacement isn?t very difficult procedure.
Take a look here:
[Qosmio X770 Memory Replacement|http://aps2.toshiba-tro.de/kb0/CRU22039I0000R01.htm]



> Best choice to buy and how to change at home?
SSD drives are compatible and you can use an common 2.5? SATA SSD drive.
There are different SSD drives on the market so you can choose the one of your choice.
Some are cheap but the performance is low. So recommend reading some articles and test about available SSD drives.

5 more replies
Answer Match 27.72%

So I have a Sapphire Radeon R9 280x, and I just bought a MSI GeForce GTX 970. I also have a 500W CoolerMaster powersupply, would I need to upgrade this to 600-750W?

+note: I also bought two sticks of HyperX 16GB RAM and a Corsair H75 Hydro Series CPU Cooler.

A:Upgrade graphics card=upgrade powersupply?

Your 500 watt PSU meets the minimum requirement.... GeForce GTX 970 | Specifications | GeForce

So with that in mind....I'd say yes to a new PSU.

6 more replies
Answer Match 27.72%

I am not sure if I have win 8.1 pro or win 8.1Says 8.1 pro in mscinfo but doesnt allow me to install win 8.1 pro features. Anyway that is not the issue I am writing about. Issue is , I had my laptop crashed 1 month after I installed Win 10. it required HD replacement by HP, at which stage I was told not to ugrade to win 10 as my laptop will not handle it. My Question is:free upgrade to wn 10 ends soon.what happens when my OS will no longer be supported by MSWhat is actually the problem that causes HP notebooks to crash? Is there a feature in win 10 that can be turned off to avoid causing the crash?Atleast we can keep up with the updates!! Need some help to understand what the actual issue is and if there has been some workaround found by now.SD

More replies
Answer Match 27.72%

Recently upgraded from Windows 7Home to Pro. After a while I keep getting non genuine error page. MS support initially said it is Genuine and did a remote fix but error still returns. Next time MS support say its a known issue due to Malware that only their subscription service can remove. I have run a Malware check, using MS's own Malware checker and found 1 file called TrojanDropper win32/ Rotbrow.d. This has been removed. Norton have also done a deep clean and found nothing. Running scannow it tells me there are windows files it cannot repair but in the CBS.log there is no "Cannot repair" flagged up. Running MGADiag I get a list of tampered files. I have another machine with the Windows 7 Home on it and I've tried to replace the suspect files to no avail. If anyone can help I'd be obliged.


Code:

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-KPGQV-TR48C-HTG63
Windows Product Key Hash: yrW7o3B10jiOtqj/nIyuxa6Aisw=
Windows Product ID: 00371-619-7585003-85923
Windows Product ID Type: 5
Windows License Type: Retail
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {719E5BE0-D838-4507-B86D-E24B2DF62B13}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000009
Build lab: 7601.wi... Read more

A:Windows 7 Upgrade Genuine on upgrade but fails later

I may have solved this myself, by reading a lot of posts here folks so that you so much. It's great to have real support out there. I realised I have to go through the procedure of taking ownership of files, granting admin rights and copying stuff in manually. At last it past the MS validation test online for the first time. Hopefully this will be of help to others.

3 more replies
Answer Match 27.72%

Hello together !

For your information:

Did a memory upgrade today at 2 Toshiba Satellite Pro 2100 (1,9 GH, 256 MB DDR-RAM originally), both up to 1 GB, all fine and not problems.

Just wanted to end rumours about "only 512 MB all together" or even less.

If searching for it, remember to think of the specifications:

DDR-266 (PC2100)
DDR-SDRAM, SO-DIMM
200 PIN
CL 2.5

concerning RAM frequency, building form etc.

Greetings

L0nestar

P.S.: Don`t think a discussion is necessary, thread could therefore be closed...

A:Satellite Pro 2100 - RAM Upgrade - Memory Upgrade

According the notebook specification Satellite Pro has two memory slots and can be upgraded up to 1 GB. It is very useful to have your confirmation about RAM upgrade for this old but still good notebook model.

Have a nice day.

8 more replies
Answer Match 27.72%

All over the net it is suggested that before upgrading to Win 10 you can right click the MS icon and use "Check your upgrade status". Here is an example:http://www.zdnet.com/article/will-y...On neither of our Win 7 computers does it show this. In that position, below "Get Windows 10", it says instead "Reserve your free upgrade". Here is a screen capture:http://www45.zippyshare.com/v/eVMHK...Does anyone know what this is all about? The only thing I can imagine is that you have to first make the reservation. If so the logic escapes me because it would seem the right way round would be to check compatibility before making the reservation.I realise that you should go to your computer manufacturer but it seems odd that a facility so widely reported doesn't seem to exist.Always pop back and let us know the outcome - thanksmessage edited by Derek

A:Upgrade W7 to W10, Check your upgrade status is missing

Found a way to get the information but nothing like the way it is presented on web pages. Something I all too frequently run into these days - bags of communication often hopelessly unclear. Yeah, I'm getting old LOL.Always pop back and let us know the outcome - thanksmessage edited by Derek

4 more replies
Answer Match 27.72%

Hi, AllI try to upgrade the BIOS of my x1c gen3 20BS, and BIOS update utility for windows, the BIOS version is UEFI: 1.13 / ECP: 1.09I am working on windows 8I follow the utility's instruction and install the tool, run the tool, and reboot the OS, everything seem fine, but when I check the BIOS again, I found the BIOS vesion is still 1.10, but ECP has already upgraded to 1.09 Anyone could help? Many thanks.

More replies
Answer Match 27.72%

Like the topic says, trying to upgrade to windows xp - abit with a "full install" disc. So far I've not figured out how to do this, or if it's even possible. I tried inserting the disc while in windows 98, but it didn't give me an option to upgrade.
 

A:Windows XP: Can I upgrade from 98 with full (not upgrade) disc?

16 more replies
Answer Match 26.88%

once the update started it rained go maybe 15 seconds and just shut my computer off entertainment a bloatware screen say that the software ran in to an error and it would restart itself. I let the computer along for over an hour and finally restarted the system muse us in the power button.  once I went to restart the system I only got a blackberry screen my computer is out of warranty and your dell bios update killed my motherboard I called dell they told me in not so many words my motherboard was Fried and they would not replace it.  If I gave some on software I wrote and they installed it and it had no warning it would fry the I computer thatbwould be data to someone's personal property... DELL is this how you value your customers?

More replies
Answer Match 26.88%

once the update started it rained go maybe 15 seconds and just shut my computer off entertainment a bloatware screen say that the software ran in to an error and it would restart itself. I let the computer along for over an hour and finally restarted the system muse us in the power button.  once I went to restart the system I only got a blackberry screen my computer is out of warranty and your dell bios update killed my motherboard I called dell they told me in not so many words my motherboard was Fried and they would not replace it.  If I gave some on software I wrote and they installed it and it had no warning it would fry the I computer thatbwould be data to someone's personal property... DELL is this how you value your customers?

A:got the windows 10 free upgrade and used the dell diagnostics tool to upgrade driver and bios everything worked fine until the update of the bios!!!!

I called dell they told me in not so many words my motherboard was Fried and they would not replace it.

Dell just saying it's a "possibility" the motherboard might need to be replace. No one can tell you that motherboard is definite "Fried" without first looking at the system.
What is the system model number and version of windows before upgrading to windows 10? Example: Dell Inspiron 3543, windows 10
You're able to boot into BIOS(F2 key) and diagnostic (F12 key) ?
1. Power off computer
2. Power on computer, quickly start tapping F2 key ( BIOS) or F12 key( BIOS) continuously

3 more replies
Answer Match 26.88%

I upgraded to windows 10 on my Aspire V5 and now I cant print with my HP B110a Photosmart printer. I went on to the HP solution centre and after I downloaded a driver that was supposed to work on windows 7  8  8.1  and 10. But It hasent even when the solutions centre said the printer was 100%,and did nt need anything else but I still cant printI use my printer most days and I am lost. Can sombody help please.

More replies
Answer Match 26.88%

I ordered this copy of Vista Ultimate Upgrade:
http://www.royaldiscount.com/miwiviulup.html

As stated on this page, it is supposed to upgrade from Windows 2000 Professional provided it is a clean install.

I started the installation from within the Windows 2000 GUI; but, the Vista setup halted with a message that upgrade is disabled and I must be running Windows XP or Windows Vista to upgrade.

I started the Vista setup by booting from the Vista setup disk and it has now halted with this message: "To use the product key you entered, start the installation from your existing version of Windows."

Catch 22

What should I do now?
 

A:Upgrade to Vista refuses to upgrade

10 more replies
Answer Match 26.88%

I upgraded my BIOS to 5CKT77US not long ago and my understanding is that I can go up to 16GB RAM now; can anyone confirm this for me before I spend the money and have it not work? I'm currently running 8GB PC-8500/533. Thanks!

More replies
Answer Match 26.88%

Bought this laptop Nov 13, tried upgrading to 8.1 but pc would not work. Took back to pc world where they rolled it back to win 8 and it was then ok. However, microsoft not supporting 8 any longer and telling me i must upgrade to 8.1 or 10. obviously I have aready tried 8.1, and hp website says that my model has not been tested for 10. Help!!

A:Windows 8, can't upgrade to win 8.1, can I safely upgrade to...

NBrooks1 Hello;Allow me to welcome you to the HP forums!I read your post about your wanting to Upgrade to Win10 and wanted to help. The only "safe" upgrade is one you can revert back from if it goes poorly or you change your mind about it. While Microsoft tells you that there is no risk in the Win10 Upgrade, because they let you believe that you can always revert back to your original OS and setup within 30 days, the ugly fact of the matter is that the Win10 GoBack function has proven to be unreliable -- and when it fails, it can leave machines in a corrupted state -- which doesn't always happen, but it does happen often enough to be a problem and you won't get any warning in advance that it is going to trash your PC!If that is not bad enough, the Win10 Upgrade is know, in some cases, to corrupt the Recovery partition stored there by the OEM that built the original machine.  This pretty much guarantees that no HP Recovery is going to work.So, if you are determined to to the Upgrade, you need to protect yourself against the problems prior to doing that -- and the best way to do that is to make an image backup of your OS and boot partitions on an external drive or large USB stick.What I recommend is the following:1) Download and install Macrium Reflect (MR)2) Run MR and choose the option: "Create an image of the partition(s) required to backup and restore Windows" to write a full backup to an external drive or USB stick3) Use the option to create a boot USB ... Read more

5 more replies
Answer Match 26.88%

Can I upgrade CPU, add RAM and upgrade graphics card in HP 15-083ea laptop?

More replies
Answer Match 26.88%

Greetings
So here's the scenario.
On the 28th of July, I downloaded the free upgrade to windows 10 but i chose not to install it and decided to postpone for the following Monday. Things happened and I was unable to return and complete the update and since then I have been unable to find a way to upgrade.I definitely know it it is downloaded to my machine.

Thanks in advance

More replies
Answer Match 26.88%

Upgrade from Windows 8 to 8.1 is that a free upgrade?
 

More replies