Tech Problem Aggregator

Bios password appears on Portege M

Q: Bios password appears on Portege M

Wanted to upgrade from win 7 to win 10
First win 10 check telling "your processor not compatible "
After check for info some changes made in the bios and now . . .
Request me password !
Seems I have to contact Toshiba for solution: whom and where
Thks regards

A: Bios password appears on Portege M

Hi,
any tips, info ?
thks

1 more replies
Answer Match 77.28%

Hello,

I have problems with entering the BIOS and boot. My device requests a password, what can you do? Toshiba service centers in our city is not present. All I could do - press control, tab, control, enter, and the machine gave me PC Serial

Sorry for my English, I used Google translator.

More replies
Answer Match 76.86%

Hello all,

I hope I can get some help / guidance from some one with more experience with the M400 if possible?!

I reinstalled the OS and setup the biometric security for me, which has worked flawlessly! However I stupidly also set up the boot up security (BIOS Password). So when the tablet gets turned on I can scan my finger and get in without any issues, however I now want to turn the boot up security off. So I booted it in to the OS and went to disable it....however it asks for my password....which I have forgot as I have been a typical end user and have been only using my bloody finger!

Does anyone know if I can disable the BIOS security while in the OS using the biomentric security rather than entering a password? I have tried just changing the admin password within the win OS but that doesn't work....any ideas?

Any help with be greatly appreciated!

Cheers

A:Portege M400 - Change BIOS Password within OS without knowing password?

> So I booted it in to the OS and went to disable it....however it asks for my password....which I have forgot as I have been a typical end user and have been only using my bloody finger!

You are speaking about BIOS password which you set up in the BIOS?
As far as I know you cannot remove the BIOS password if you don?t know the old BIOS password.
In such case just the Toshiba ASP could help you? just the Toshiba ASP technician could remove the unknown BIOS password

5 more replies
Answer Match 73.5%

Hi!
I found my old laptop, but can't boot it - forgot BIOS password. CMOS battery disconnection didn't helped.
Local support asked me go to offline service, but they want too much money for unlocking - this laptop is now cheaper himself.
USA support asked me write here
May be somebody can help to generate unlock response code?
Model is Portege R500 PPR50E-06W012RU

A:Portege R500 BIOS password

BIOS protection is very important feature for protection so it cannot be discussed in public forum.
If someone writes here how you can remove BIOS password every stolen Portege R500 can be unlocked.

I know it costs a bit but this should be done by Authorized service provider.

2 more replies
Answer Match 72.66%

Anyone have a back up bios for a Portege Z30-A-10Z laptop.

My laptop bios has locked me out with password and need to program a new bios chip with new bios.

I cant prove ownership with Toshiba with original receipt so they wont help as I purchased it from ebay a wile back and the seller is no longer registered :(

A:Password locked Portege Z30-A-10Z - BIOS needed.

It is very stupid situation now. If your notebook is ?locked? by BIOS password you have big problem now and nobody here can help you. BIOS password must be removed by authorized service provider.
BIOS password is very important security feature so any problem with locked machine must be handled by ASP. There are several different methods for BIOS password removal and it has nothing to do with BIOS backup or some kind of new BIOS installation.

2 more replies
Answer Match 72.66%

Hi

I have toshiba portege s100 i loss bios password when i search about it so i found a method i pressed ctrl, teb and ctrl,enter my leptop screen shows s/n and challenge code and system need response code but i do not know response code pleas help me i need response cod the s/n and challenge cod is as under,
pc serial no = 36738792g
challenge code= 7N67Y-YVDEA-XQ6VY-KMLCB-1F1ML
response code=

Thank you.

A:I loss BIOS password for my Portege S100

Hi

Unfortunately nobody here can help you with this. BIOS password is very important security feature and it cannot be solved on some public forums.
This can be solved with authorized service only.

Response code can be given by Toshiba only and they don't give it to anyone. Only authorized service provider can get it after check if notebook is not stolen.
Contact nearest Toshiba service provider and they can help you wth this.

Bye and good luck.

1 more replies
Answer Match 72.66%

i have a laptop Toshiba portage M400
locked by Bios password
even i can't access the bios
how can i reset the bios
please hep me
i have an important data inside the laptop

A:How to reset BIOS password in Portege M400?

Hi

Please check http://aps2.toshiba-tro.de/kb0/FAQ35002I000IR01.htm
There you can find answer to your question.

2 more replies
Answer Match 72.66%

Dear,

We from UsedPC a company in Holland thats sell second handed Notebooks en Computers just bought 4 of Toshiba Portege M300
We only have one problem on all of the machines, They are locked with an start up password ( bios password ) so we cant install them
Only we need the responses codes that we dont know.
Can somebody help us out please?


Greets,


UsedPC

A:Portege M300 – BIOS password removal

Hi,

Read this article:

http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=11

As you see to remove Bios password you should contact the asp (service center). It's user to user forum and nobody can really help you with this issue.

4 more replies
Answer Match 71.82%

Hi,

My Portege R700M stopped working after I spilled tea on it. Service center had rejected it quoting 'Motherboard, damaged', The laptop was setup for BIOS password protection for HDD.

Even though the hard drive is intact, I am not able to recover the data from due to BIOS password protection. will Toshiba able to help me unlock the password.

Regards

A:Defective Portege R700M - BIOS & HDD password reset

I presume mainboard is defective and will be replaced. I presume HDD is OK so I believe your original HDD will be used again. After mainboard replacement you don?t need BIOS password anymore. New mainboard will not be secured by BIOS password.

At least explain the situation and Toshiba technicians will explain to you how it works.

2 more replies
Answer Match 71.82%

Can anyone help with this problem.

At our site we have approx 300 of these laptops and they are all bios protected.
Recently had a problem where when inputting the bios password and it says its incorrect even though its the standard password we use on all our laptops. The user also confirms they didn't set a password...

Is it possible for the bios to somehow have become currupted (the machine was experiencing blue screens before) or how can I factory reset the bios password.

Before anyone says yes we own the machince and can prove it!

A:Portege R700 protected by unknown BIOS password

Maybe it sounds stupid but I think you should clarify this with nearest Toshiba service provider.
I use Toshiba notebooks for years now and I know for sure that Toshiba doesn?t sell notebooks with any kind of password or such kind of protection.

If you have such amount of notebooks maybe there was some special dial about configuration or protection. Anyway, BIOS password removal cannot be theme on such public forum. BIOS password protection is very important security feature and if there is some problem it must be clarified with authorized Toshiba service provider.


BIOS password cannot be set or changed from alone and, as far as I know, there is no kind of factory reset. I just know that BIOS can be set to default settings. That?s all.
Contact nearest Toshiba service provider and clarify this issue.

2 more replies
Answer Match 70.56%

Hi,

yesterday i set the bios/supervisor password.

When i now turn on the notebook, i can see the Toshiba - Leading innovations screen and then it goes dark and won't boot any further.

The harddisk / fan / graphics card etc is working - but i don't see anything nor do i get some kind of prompt or shell or whatsoever.

I tried all those "Press, ESC, Press F2, Press F1, Press INS" stuff, nothing worked out.
I removed the battery for several mins while pressing the power button, nothing.

Maybe somebody has some kind of clue whats wrong with this maschine....

A:Portege R830-1EE: Supervisor / Bios password - No Boot or login prompt

Hi

Did you use some high ASCII character like ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ? etc in your BIOS / Supervisor password?

In the past the usage of such characters prevented the notebook from booting up.
In such case you had to contact the service partner in order to solve this problem.

4 more replies
Answer Match 56.7%

I need help I can't figure out the password on the black enter current password screen can you help please i have a hp mini 110 CNU9453269 PLEASE!!











Solved!
View Solution.

A:Enter current password screen appears I forgot my password I...

Hi, Enter   e9lovqf7go    ( 3rd character is a lower case L ) Regards, DP-K

2 more replies
Answer Match 53.34%

Hi,
has anyone tested the new bios (4.20-WIN(ECB1.40)) for the Toshiba Portege Z30-A or is there an official change log?
Did toshiba change the fan-behaviour? The fan is not loud/annoying, but it could kick in a little bit later.
Regards

A:New Bios for Portege Z30-A Changelog

Has somebody already installed the new bios?

1 more replies
Answer Match 53.34%

Hello everyone,

I upgraded the BIOS on my Z30-B-119 laptop, and it is much worst than the original BIOS so I would like to downgrade it.
There was no way to save the original BIOS when updating and the previous BIOS is not available on the website.

Do anyone have the original BIOS and knows how to extract it?

Or maybe someone knows how to contact Toshiba technical team directly? (Seeing what they implemented in new BIOS, I have no hopes they read this forum or care about user opinions.)

If you wonder why I want to downgrade and what is wrong with it, see below for explanation.

I was convinced that the new BIOS would fix the problem with the fan, which switched on way too early, but it turned out they made it much worst! Now the fan switches on at 42?. Before it was 50?, which was already a stupid choice of Toshiba engineers, providing that the temperature rating of this CPU is 105? so they could keep the laptop quiet at least up to 60?, especially that many people complain about the fan in this model. Instead, Toshiba did the opposite and lowered the temperature even more.


Seeing how senseless choices their engineers make, I will never buy another Toshiba and will not recommend anyone buying their products. But since I already made the mistake an bought a Toshiba laptop, I hope I will be able to downgrade the BIOS or contact them to ask for an update.

Let me know if you know how to do it.

A:How to downgrade BIOS on Portege Z30-B?

Toshiba Portege Z30-B-119 PT253E-01100XPL
This European model belongs to PT253E series

The Portege Z3x-B PT253U (the same model) has been released in USA and it supports the same BIOS

The BIOS for the PT253U is compatible with PT253E and can be downloaded here:
http://support.toshiba.com/support/v...tentId=4007631

3 more replies
Answer Match 52.92%

I want to remove the *well-known* HDD password at my Toshiba Portege M400.
I did not find any option at BIOS or installed software from Toshiba support.
I strongly need your help.

BIOS= 3.80
OS - Windows 7 Enterprise 32 bit Ru

A:Clear HDD password at Portege M400

Hi,

please, read here:

http://aps2.toshiba-tro.de/kb0/FAQ9202JG0000R01.htm

As I know, in Bios hdd protection password option should exist

Message was edited by: Jeka-IL

4 more replies
Answer Match 52.92%

Folks,

I have been wrestling with this device for a while now and I seem to be progressively making the situation worse.

My current issue is that I can no longer access the BIOS after changing a setting in the BIOS that related to USB emulation (or something like that). I was in the process of trying to make the device boot from a USB and pretty much twiddling with every setting to see what would work.

This one didn't. And now the device no longer responds to F2. It's like it is ignoring the keyboard. Doh!

Is there some way to roll back or re-flash the BIOS? Or another way to access it? I tried an external keyboard, to no avail.

How did I get here?

Well ... I was given this device to put back to factory condition and I could not find an obvious option that would do this, other than the Toshiba Maintenance Utility which looked hopeful. It offered to erase the partition (which at the time seemed fair enough) - BUT THAT"S all it did - so the machine just repeatedly boots, displays "Please insert system disk" and then reboots.

OK, I'm an idiot - but it does seem silly for Toshiba to offer an option that instantly bricks the machine?

Anyway, I've moved on from that problem to one that is significantly more dire. Not being able to access the BIOS means I don't have any options - unless one of you wonderful people can help me discover one.

Help

I have since discovered that the next setting I was going to adjust - the Secure Boot setting - may have solved... Read more

A:Portege - Can't access BIOS after update

Which notebook model do you have and which operating system do you use?

If you use Win8.1 you have access to some BIOS settings using settings in system settings. Check it out please.

2 more replies
Answer Match 52.92%

Hi All,

I have a Toshiba Portege R830, running 32-bit Windows 7 (SP1) enterprise (for work).
I also boot into Linux Mint 14 64-bit, which I have installed on a portable USB HDD (outside work).

I recently bought a USB 3 HDD, but when I connect it to the USB 3 port on my R830, it only gives me USB 2 speeds (25 MB/s).

I checked with some diagnostic utilities (usbdeview, etc), which say that the drive is connected in USB 2.1 mode.

The drive reports itself as being USB 3, the cable is USB 3 (SuperSpeed), and the port I'm using on the R830 is 3.

I experience the same, whether I boot into windows or linux.

I updated all drivers on both OSs, to no avail.

next i tried to update the BIOS, but I keep getting the following error:
"An error occurred while preparing the update environment.
You have not given permission to execute the update."

For the record, this is the BIOS I'm going from, & to.
BIOS Version : Current Ver.2.80 --> Updated Ver.4.10
EC Version : Current Ver.1.10 --> Updated Ver.1.60

Does anyone know why I would not be getting USB 3 speeds (which, for my drive, are expected to be around 40 to 50 MB/s), or why all diagnostics are saying USB 2?

Does anyone know how to overcome the BIOS update issue?
(I've tried safe mode, disabling AV, disabling NX)

Cheers

A:Portege R830 - USB 3 & BIOS updates

Is this USB driver installed?

Please try to install it and check USB speed again.

10 more replies
Answer Match 52.92%

Hi forum,

I take out the HDD, when I stick it back; the BIOS didn?t detecting the HDD.
How can I set the HDD at the BIOS? The option drives i/o isn?t editable.

I need urgent help...

Thanks

A:Portege 3500 does not detecting the HDD at the BIOS

Try to access the BIOS and set it back to the default settings. Don?t forget to save the changes. ;)

A friend of mine had a similar issue and the BIOS default settings was the key.

So check it out

1 more replies
Answer Match 52.92%

Please can someone tell me where to find the latest BIOS for a Toshiba Portégé M400. I have looked on the Toshiba website, and all there is for Portégé is the M750, and M800.
Thanks in advance,
Joel

A:BIOS for Portege M400 needed

Have you also checked ARCIVE option?

2 more replies
Answer Match 52.92%

Hi!

I have a Portege 3440CT with bios version 1.50.

This version does not support large HDD so I thought I'd update the BIOS. (don't know if version 1.60 does either, does anyone know?)

When I try to run the bios-update-program on win2000, it says "Initial error", anyone know what's causing this?

BIOS is downloaded from Toshibas website.

I have no floppy or CD-rom available.
Have tried the updater on win98, and also in DOS and it says "this utility not available on v86 mode!"

Is there any way to place the BIOS file on a small hard drive, and boot from that?

Ideas, anyone?

A:Bios update on Portege 3440CT.

Sorry CyB but I really do not understand you. If you check Toshiba support page you will find two BIOS updates. Both of them must be done using FDD. So now I am asking myself why you try to do it under running operating system. Sorry but it is really ridiculous.

Toshiba provide two different BIOS updates. One is TRAD (must be done with FDD) and WIN (can be done under running WXP or now Vista). For old notebook models there is no WIN version.

Is there any way to place the BIOS file on a small hard drive, and boot from that?

As far as I know something like this is not possible and you can check eBay and obtain FDD. You can get it for few bucks. It is really not expensive.

1 more replies
Answer Match 52.92%

i do not have a floppy drive on my machine, only usb ports and a sd card slot. How can i upgrade the bios?

pete

A:Portege 4000 bios upgrade

The easiest way is to create a dos boot cd-rom. There are several descriptions on the web. Google for it.
Add the extracted Toshiba bios files biofc67t.com, ec29nobb.bin, chgbiosa.exe and chgfirma.exe to the CD-rom.

At first boot from the cd and run 'chgfirma ec29nobb.bin'.
Now the ECKBC-Firmware is written (don't power off during flash!!!)
Than boot again from cd and run 'chgbiosa biofc67t.com'.
This flashes the Bios.
Both flash are necessary!

Here is how to extract the Toshiba bios file.
At first you have to extract the R211VOL2.exe file. Easiest way to do so is to use 'universal extractor' -- google for it.
After this you will get the file R211VOL2.IMA. This is a floppy image file.
You can extract the single files in the archiv using winimage (trial version should work).

Good luck!

2 more replies
Answer Match 52.92%

I've been looking on the Toshiba Site for BIOS updates for a Portege 3440CT, but can't find anything for the older models. Are they still available? Also the BIOS on the laptop at the moment is 1.50, acan anyone tell me what the most recent version is?

Thanks

Neil

A:Need BIOS update for Portege 3440CT

All BIOS updates, drivers, tools and utilities for older notebook models you can find under ARCHIVE.
For your Portege there you can find BIOS version 1.60.

5 more replies
Answer Match 52.92%

I need make cd-rom 1-st boot device.
There are no operating system installed on my hdd.

I could not change my BIOS.
I press and hold Esc button then F1.

After that i see Bios screen, but i can not change anything.
I can only escape without and with changes?
No items can bee changed?

Can anybody help me???

A:Re: Portege M400 - Cannot change anything in Bios

HI

You don?t need to change the booting device in BIOS.
You can also set it while notebook powering up.
Press F12 immediately after the notebook has been powered on
Then a boot menu should appear.
Here you have to choose ODD as booting device and should confirm with Enter.

That?s it

10 more replies
Answer Match 52.92%

i have a portege 2010 with a bad bios
on normal startup it goes to this screen
BIOS(Block3) is damaged! (Call your serviceman.)

so i have tried to reflash the bios the usual way.
making a floppy with
-----
biosfile biofca6t.com
chgbiosa.exe
-----
and booting up with either the bios flashing key pressed (just left of the spacebar)
or by pressing any key at the "block3" screen

it does load the chgbiosa.exe program. which reads the bios file
Flashes, and reboots
-----
Reading BIOS file...
Erasing and Writing BIOS data...

ROM write Successfull!!
Utility Finished
-----
Then it Reboots


but sadly. nothing changes. it still goes to the Block 3 screen

so i am thinking that i may have a damaged bios chip on my hands.
since the successfull re-flash doesn't do anything..

-----------------
NOT RECOMMENDED
so i decided to check if the chgbiosa indeed do anything.
so during the write process i disconnected the power.
(incomplete write process) and i ended up, with a (block 1)
damaged. Another bios update later.
and we are back to (Block3)
so it does write to the bios
DO NOT TRY THIS: May erase the "failsafe" part of the bios
---------------------
so the question is. Where do i go from here.

i am willing and able to desolder the chip and flash it elsewhere
but i dont have a "complete" bios file only the u... Read more

A:Portege 2010 - Bad BIOS (block3)

Hi

So many questions and most of them should be answered by technicians. I really think you need professional help. I recommend you to call nearest Toshiba service provider and ask for help.
To be honest I don?t think you will be able to order this chip anywhere. Talk with service.

By the way: refurbished mainboard for Portege 2000/2010 with well working BIOS chip I found on eBay for 39 Euro so if you will not be able to do anything and repair BIOS buy new motherboard, exchange it and be happy.

By the way, I have Portege 2000 and it is really nice notebook.

3 more replies
Answer Match 52.92%

Hello friends,

i have Portege R700-1321 Laptop.
about 1 year a go i was update my BIOS version to 2.20 and after that i cant enter the BIOS!!!
try any way but noway :(

when press F2 after rebooting computer nothing append and reset again .
try to F10 ro change boot order but again just restarting :(
i need to change boot order to install new fresh OS and of course change my BIOS setting.

please help me.
if any body had a same problem or know way to fix it :(

A:Cannot enter BIOS on my Portege R700

Can you use F8 or F12 at start-up?
Is maybe ?fast boot? option enabled? Check it out please.
Open Toshiba assist > optimize > Toshiba HWSetup > Boot priority. There you should find option for boot speed. Be sure it is set to ?normal?

4 more replies
Answer Match 52.92%

My current bios version is 1.6, the latest is 3.0
When trying to update the bios, I get an APPCRASH from INSTALL2.EXE
exception code c000005

I tried to run it in safe mode, but this doe not help

Thanks for help

A:Portege A600: cannot update to bios 3.0

Hi

The istall.exe should not crash and you should not update the BIOS in safe mode!
The Windows should be booted up and should run correctly!

Here is a Toshiba FAQ How to update BIOS:
http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm

Possibly the error code is related to corrupt windows OS or to missing some necessary Toshiba tools.
Using Win XP the Common Modules should be installed.
Using Vista or Win 7 the VAP (value added packed) should be installed.

8 more replies
Answer Match 52.92%

I am trying to reformat a Portege p3500 for my brother's g/f. I have an external usb dvd drive and a copy of XP ready to go. The problem is I cannot get into the stupid bios. I hit esc, during the toshiba boot screen and get the following message. "check system. Press F1" when I press F1 it just goes right back to the toshiba boot screen and from there loads xp. I have looked other places on-line and supposedly pressing F1 accesses the BIOS. Doesn't seem to work for me. I am stuck please help
 

A:Can't access Portege p3500 BIOS

Boot XP, get into the Control Panel, System, Advanced... choose Startup and recovery Options... and check the timing settings for going into Windows and into recovery options. Set going into Windows to 0 seconds and recovery options to 10 seconds. De select automatic restart and send an administrative alert while you are in there. Try the F2, F10 and DELETE keys
 

1 more replies
Answer Match 52.92%

Dear all,

I don't expect anyone to tell me how on-line!
I just need to now if this is possible and the best way of doing it.

I'd rather not use the various password cracking s/w or home-made parallel jumpers.
Can I get this done 'professionally"?

Thanks in advance,

Steve.

A:Portege BIOS Passwd Reset - Can it be done?

Yes, the BIOS password can be deleted.

This procedure can only make an ASP (authorized service provider). Here you can search:
http://eu.computers.toshiba-europe.com

Best regards

2 more replies
Answer Match 52.92%

hey everyone...sorry to bother you with such a dumb question but i cant for the life of me find out how to enter the bios on this model. ive tried f1-f12 and del and nothing seems to work?

any thoughts?
 

A:toshiba portege 3480CT bios

Try Esc.
 

1 more replies
Answer Match 52.92%

Hi,

I have only linux (antergos) on my Portage Z30-B-100, Does anybody know of any way to flash update bios?
Thanks

A:Portege Z30-B-100 update bios from linux

Hi

On the Toshiba EU driver page you can find only the win-based BIOS update version.
This means that BIOS can be updated from running system only and you need to run Windows OS in order to start the BIOS update procedure. Linux isn't supported in this case...

Here you can find the How to doc about the BIOS update
forum.toshiba.eu/showthread.php?82280

4 more replies
Answer Match 52.92%

I tried to Update the BIOS at my M700-110 PPM70E-02302DEN from 1.60 up to 1.80 (P005Bv180.exe).

However it fails with the error " BIOS Update is not supported OS. Unsupported OS or service pack installed."

Within the "more information" I could read "OS independent".
Is the Windows 7 Home Premium with Service Pack 1 not supported?

What's the matter?
Which BIOS is the right one for my system?

Please help me!
THanks a lot.

A:BIOS Update not possible for Portege M700

Hi

It seems that Vista OS was preinstalled on this notebook.
This means that you have installed the Win 7 system at your own hand.

The point is that BIOS update requires some essential Toshiba tools.
For example the Value Added Package is important software and should be preinstalled on the notebook.

Is VAP installed?
If not install the VAP before trying to update the BIOS.

1 more replies
Answer Match 52.92%

I have a Portege 3010ct.
When i got it, it had Windows 98 installed on it but i wanted to put Linux on it so i could learn that.

So i tried getting into the Bios to make it boot from my CD but couldn't get into the Bios or really do anything. So in a final attempt i reformatted the hdd.

Now i can't get into anything.
Can anyone help?

I tried every button i thought might get me into the Bios and even tried hitting all of them, no one can seem to get me into it.

A:How to access the BIOS on Portege 3010ct

Hi

To access the BIOS you should use and press the ?ESC? button immediately after Portege was power up.

But as I understood you right, you want to boot from the internal CD/DVD drive.

Well, you could also try to press the ?C? button.
This would enable the booting from the ODD.

Furthermore pressing F12 button would allows you to enable the boot menu on the screen.
Then choose the CD/DVD drive to boot from CD .

Check it out

2 more replies
Answer Match 52.08%

Hi!

I want to reset startup password on old laptop Toshiba Portege 2000.
( power on and write Password= )

A:How to reset startup password on Portege 2000

Password can be removed by Toshiba authorized service provider.
The technique for password removing is not the same for all notebook models.
You cannot remove it alone.

4 more replies
Answer Match 52.08%

Good day, I have two questions about Portege 3410.

The first one: I cannot update BIOS (there is 1.50 in use, I want to update to 1.60). The instruction does not work: I connect Teac USB-drive on USB-port, switch USB-FDD emulation to Enable, switch notebook On with F12 pressed, the message "Ready to update BIOS..." appears, I presed key, but nothing happend. What's wrong?

The second one: I cannot install Windows XP on to notebook (it does not boot neither FDD-USB, nor External DVD-USB).
How can I install Windows?

Thank you.
Mikhail

A:Portege 3410 - How to update BIOS and install XP?

Hi

Just one question: Why do you want to update the BIOS? Is it really necessary?
I ask this because this update is always a little bit risky and you could damage the ROM module.
Anyway, have you tried to load default settings in BIOS before you start the update and install XP?

You can install XP without CD. Therefore you must copy the i386 folder on the HDD from another computer and some booting files for HDD? I think you should search a little bit with Google to find workaround for this. You should find enough! ;)

4 more replies
Answer Match 52.08%

Changing the BIOS setting for Portege S100 from JBOD to RAID0, I hit space on Exectute Creation and enter the string key in the manual and press "enter".
The settings then return to existing settings and not the new RAID0 setting I selected.

I have been at this most of the day / evening looking at various posts, but I can see nothing wrong with the details entered.

It is the same as recorded in this link:-
[How to Change the RAID configuration|http://aps2.toshiba-tro.de/kb0/TSB6901K60006R01.htm]

I am now at the end of my tether, I only wanted to install new WD HDD and do fresh install of XP Pro, is that too much to ask?

A:Portege S100: How to change the RAID in the BIOS

Did you enter "1234" as the confirmation code when you changed the RAID setting?

This code can be found in the users manual :)

14 more replies
Answer Match 52.08%

Hello,
I have a Portege Z830 with BIOS version 1.60. It runs a single operating system, ubuntu, (without a windows OS it does not appear to be possible to upgrade the BIOS). I have a bootable USB (debian, created by copying an .iso image using dd) which works on other computers, but not on this one. With USB at the top of the boot priority, it is not recognized as a bootable device and the computer boots from the HDD. The boot is in legacy mode, not UEFI (there is no UEFI/legacy switch in the BIOS menu).

Any pointers how to enable a boot from a USB on this computer?


Thanks and kind regards,

James

A:1.60 BIOS does not recognise bootable USB in Portege Z830

As you probably know, Toshiba doesn't support Linux so you cannot upgrade BIOS under Linux OS.
It is also not offered to be installed from USB.

It works like application and must be executed under running Windows.

1 more replies
Answer Match 52.08%

Good morning.

Can someone tell me where can i find the changelog for BIOS update 4.50-WIN(ECB1.40)?
Thank you.

A:Portege R30-A Bios Update change log (4.50-WIN (ECB1.40)

Toshiba EU BIOS page does not provide any change log details.
But on Toshiba US driver page you can check such information.

The BIOS version seems to be the same:
Visit this page and click on BIOS (left column)
http://support.toshiba.com/support/d...ext=1200008975

3 more replies
Answer Match 52.08%

Hi,

I purchased an M400 Tablet system and having a lot of trouble with the BIOS.

I am able to get into the BIOS, but it appears to be restricted.
It says there are three pages and to use the pgup and pgdn to change pages, this does not work.

I have tried it with a USB keyboard and removing the keyboard from the tablet, but this does not work either.
The laptop does not have SWSetup installed on it. I downloaded this from the website but say's that the BIOS is incorrect.

I then decided to flash the BIOS.
Downloaded windows BIOS flash and that say's that the BIOS is incorrect.

I would like to reinstall the OS but at the moment I am unable to to get it to boot from the CD as I can't change the boot sequence.

Can any one please help me.

A:Portege M400 - Cannot navigate through BIOS pages

Hi

That?s strange.
First of all you can boot from the CD pressing F12 and then you could choose ODD as booting device.

Secondly it?s interesting to know if some passwords (user or supervisor password) have been set because such kind of password could restrict changing the BIOS options.

6 more replies
Answer Match 52.08%

I was handed a Portege 2000 to take a look at. As soon as I turn it on I can see the Toshiba logo which immediately followed by a black screen that only says "password=".
I've tried searching for answers but have come up empty handed.

I am at a loss as to what to do new. I was hoping someone here could give me some insight as to where to go from here.

Any help is appreciated.

Thanks.

A:Portege 2000 BIOS passoword is needed

Hi

It looks like the notebook is locked by BIOS password.
You need the password in order to boot the unit.
If you don?t know the password then you will need to get in contact with an local ASP (authorized service provider) technician which would be able to remove this unknown password.

Good luck

2 more replies
Answer Match 52.08%

Hi there,

My Portege A600-13Y BIOS is version 1.50:

- should I upgrade to 2.00WIN?
- I found this source for the biso upgrade 2.0 but there is no indication that this file is authentic TOSHIBA bios.
No checksums, no ssl certificate, nothing. Is it possible to get it in a secured / authenticated way?

Thanx for answers,
Schneiderlein

A:Re: Portege A600-13Y: BIOS update 1.50 to 2.00-WIN - How risky it is?

Hi

First of all you should use and download the BIOS files only from Toshiba website.
The Portege A600-13Y PPA61E is a Toshiba European notebook model and all the drivers and BIOS can be found on the Toshiba driver page.

I don?t know why you ask for the checksums or ssl certificate? the Toshiba websites are safe?
but everyone who needs the drivers or BIOS can download it?

You should only ensure that you have chosen the right notebook model and that you have downloaded the right BIOS!

But why you want to update the BIOS?
If your notebook is running troublefree then a BIOS update is not important? I follow always this advice; never change a running system.

7 more replies
Answer Match 52.08%

Had a go at installing this, and all is fine apart from installing the Value Added Package - the main thing I want to get working is the function keys for screen brightness and connecting a TV.

I understand that upgrading the BIOS can help getting the VAP installed ( I get the ID ERR NOTINSTALLTVALZ message), I know that Toshiba are not directly supporting the A100 for Vista but is there a BIOS I can install that will work? I'm thinking there might be a similar machine that works in Vista or maybe just an A100 BIOS that will suffice?

Many thanks!

A:Vista on Portege A100 - Can I update the BIOS?

Hi

May I ask where did you found the Vista Value Added Package for Portege A100?
I didn?t find this Value Added Package on the Toshiba Europe site.

There are only 3 files for Vista. One of the files is BIOS v1.60-WIN which seems to be OS-independent.

Regarding the BIOS;
You should know that the BIOS update is always risky.
If you will use wrong BIOS version or wrong BIOS update procedure you can damage the motherboard!!!
?and as you probably know the motherboard is one of the expensive notebook parts!!!
It?s not worth to trying something which can damage the notebook. You know?

1 more replies
Answer Match 52.08%

I have forgot my BIOS pasword tried 3 times..the code 60778623 apears...what to do?

A:bios password for hp pavilion G4 1303AU bios password

Please try this Password = 75650205RegardsKNRKI work on behalf of HP

2 more replies
Answer Match 51.66%

Hi all,

I think thereis a bug in the M780 BIOS. I have set only a Supervisor password on all 100-odd machines that we have. There are no other security settings enabled and when a machine goes into deep sleep (ie. after a few hours) they get prompted for the Supervisor password when waking the machine.

All machines are running the latest BIOS (2.10) and WIndows 7 64bit. As we are a school we want to prevent the kids from booting from CDs etc.,

I have configured the Security section of BIOS like so;

User Password: Not Registered
Supervisor Password: Registered
HDD1/SSD1 Password Mode: <User Only>
HDD User Password: Not Registered
TPM: <Disabled>

Any help or confirmation of the issue would be appreciated. Cheers!

A:Portege M780 - Prompted for supervisor password after sleep

UPDATE: I have since discovered that the problem exists when waking from hibernation, not from sleep. I have disbaled this via Group Policy for the "Balanced" power plan which has resolved my immediate issue, although this behaviour still shouldn't occur.

1 more replies
Answer Match 51.66%

Hi

I have a Portege P2010 laptop with no floppy or cd drive.
Please can someone tell me how to reinstall windows or bypass the ctrl alt delete password on start up because I can?t find a way..

A:How to bypass password or reinstall windows on Portege 2010?

Hi

You mean you want to bypass the admin password?
I doubt this is possible? I didn?t find a way to remove such password if it?s not known to you?

However, the new OS installation can be done without the CD/DVD drive?
You can copy the i386 folder from the Win XP CD to the HDD.
Then you should access this folder on the HDD and have to execute the winnt.exe in order to start the Win XP setup procedure?

1 more replies
Answer Match 51.66%

Hi,

how can I update my BIOS when using Ubuntu Linux?

The reason why I'd like to update my BIOS is that on the one hand Ubuntu
writes an error message during boot-up and recommends to upgrade it and on
the other hand I'm afraid that there is maybe a temperature problem, at least the
notebook becomes slower after working for a while.

The notebook operating temperature usually is between 45-64 degrees.
The fan turns on at 62 degrees and turns off at 52 degrees.

Temperature seems to be pretty normal I would say but I think its not normal that the
notebook becomes slower when operating above 50 degrees.

I already opened it, it seems to be all right with the cooling unit, no dirt e.g...

Maybe I just persuade myself I and the performance is completely normal for a PIII with
866MHz??

Thank you

A:Portege 2010 BIOS update / operating temperature

Dear Julio

I presume you know that Linux is not supported OS and designed BIOS update is created to be performed in running Windows OS. This nice Portege is known to me and I know very well that it is not the fastest notebook and it is designed for business purposes like working with Office, e-mail communication and every other everyday activity.

Because of that answer to your latest question can be: yes you persuade yourself.

5 more replies
Answer Match 51.66%

I have installed W10 on my R700 and R930 successfully - but I have two minor issues I can?t solve:
- I cannot enter BIOS - the route via Settings - advanced Start - troubleshooting - Start repair etc. does not work. How do I enter BIOS in W10???
- I try to update my Intel drivers via the Intel driver Update Utility - but when I run this App - the App are not able to identify any Intel drivers on my two Porteges - how can this be possible? In the System info I can see information about the Intel processors - how can that be?
Otherwise W10 is running good....

/Anders

A:Win 10 on Portege R700 and R930 works but wher is the BIOS?

Well - I found the answer to the first question - how to enter Bios in W10 - in the energy options you have to disable quick start-up - then you can enter BIOS by just holding the F12 at powering up. Worked on my two Portege.
/Anders





I have installed W10 on my R700 and R930 successfully - but I have two minor issues I can?t solve:
- I cannot enter BIOS - the route via Settings - advanced Start - troubleshooting - Start repair etc. does not work. How do I enter BIOS in W10???
- I try to update my Intel drivers via the Intel driver Update Utility - but when I run this App - the App are not able to identify any Intel drivers on my two Porteges - how can this be possible? In the System info I can see information about the Intel processors - how can that be?
Otherwise W10 is running good....

/Anders

3 more replies
Answer Match 51.66%

Hi,

I recently picked up a Portege M200 and installed (via PXE - network install) Windows 7 on it. I would like to upgrade the BIOS as it's still at the original BIOS (1.1). I downloaded and extracted the pkg and tried to install via Windows but it says my OS isn't supported. I don't have an external CD drive or FDD - how can I update the BIOS? I tried to put it on a USB drive but there doesn't seem to be an option to boot from USB.

Thanks!
Jerry

A:Portege M200 BIOS update running Windows 7?

Ok, I'm thinking I could use an SD card but I see it's not recognized by Windows 7 and when I put in a card, nothing happens...

Anyone know where I can find a driver for it? I do see there are 2 devices not recognized - one "Base System Device" and one "Unknown Device"...

And I see it doesn't recognize the video card either - just uses Standard VGA Graphics Adapter which seems to work fine...

2 more replies
Answer Match 51.66%

Hello Forum,

i have exactly the same problem as described here, 2 years ago:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65519

I need to update my BIOS, but i cant because the BIOS Updater tells me that Intel-TXT is enabled.
Unfortunatelly i cant disable it in my bios. Its just not selectable. The "cursor" just jumps over it.
I can only "Hide" it which doesnt help.
I have the same for the VT-d and VT-x setting in the BIOS. This is not selectable or changeable as well.

TPM isnt enabled though...
I installed the infineon suite and it tells me that i need to enable TPM in bios to use it. :-(

I have an very old Bios Version 3.1 and i read in the changelog that in V3.4 and 3.5 there were many TPM related changes....

Anyway....
Back then, a user named Paolo30 uploaded a file P007Dv360A_EC77V140.zip to 2shared.com which fixed this.
Unfortunatelly this file was deleted on 2shared.com

can someone please provide that file (or a later bios update) which fixes this?
Thanks in advance.

A:Need Portege R830 BIOS Update without Intel-TXT Check

Port?g? R830-10P belongs to the PT321 series so you need BIOS released for Port?g? R830 PT321

You can download such older BIOS versions from different Toshiba driver pages.
For example: http://www.toshiba-asia.com/sg/support/drivers

On this Toshiba Asia page I could find all BIOS for this Portege model.

3 more replies
Answer Match 51.24%

I couldnt save my Bios setup because i can't find the end keys to save the changes.
I tried to hit all the keys in keyboard but none of it save the settings.

Can you show me the keyboard diagram showing the end keys?
I have toshiba portege 2001 series.

A:Portege 2010 - Cannot find the END button in order to save BIOS changes

>Can you show me the keyboard diagram showing the end keys?

I checked the user manual which you can download from the Toshiba user manual page and the END button seems to be located in the upper right corner? it?s above the ?Backspace? button.

Cheers

2 more replies
Answer Match 51.24%

Hi,

I have an Old Portege A100, Model: PPA10A-0002LP, but I can't seem to find that model on any Toshiba website, closest I've seen is the " PPA10A-0002L".

I'm wanting to see if there's a BIOS update that will allow me to Boot from a USB Device.

The issue I am having is that I need to reinstall Windows, but the CD ROm cant read discs.
It does Network Booting PXE, but i'm new to this sort of thing and have absolutly no idea what to do there.

Any help would be great,


Thanks

A:Portege A100 PPA10A - Will BIOS update allow to boot from a USB device

Hi

Portege A100 seems to be developed only for Australian market.
As you said there is a Portege A100 PPA10A-0002L model number listed on the Toshiba Australian page but the Portege A100 PPA10A-0002LP belongs to the same series which is PPA10A.
So in my opinion the BIOS should work too.

Anyway, I doubt that the BIOS update will add any further booting options.

Usually the BIOS support the booting from CD/DVD drive, HDD, LAN and USB FDD.
It should be possible to boot from a bootable diskette using an USB FDD drive.
I doubt you would be able to boot from USB ODD since this Portege A100 supports an internal CD/DVD drive.

1 more replies
Answer Match 51.24%

USB boot option seems to have disappeared from bios boot sequence menue after I installed bios 3.00. I wonder why this happened and how I can bring it back.

A:Portege A600 - Dissapearing of USB boot option after updating to bios 3.00

Hello,

normally the USB boot option is available and you can select the supported modi in the bios settings.
In a company environment it is possible to disable USB as boot device with some special tools. In this Case yo ushould ask your administrator.
If you are a single private customer you should visit an ASP.

1 more replies
Answer Match 51.24%

in November 2015, I bought a laptop Portege Z30-B-117 PT253E-013008CZ. Today I discovered the information that is needed to activate windows. The laptop has been pre-installed Win 7 Pro and Media attached to Win 8 Pro. In notebook isn?t COA label. When you generate the code and enter it into the activator appears information - error 0xc004f063 computer bios is missing required license. Microsoft, I was told that my product key is required to supply a computer manufacturer. Please help, I could turn the system on and work again. Thank you very much

A:Portege Z30-B-117 0xc004f063 computer bios is missing required license

in November 2015, I bought a laptop Portege Z30-B-117 PT253E-013008CZ. Today I discovered the information that is needed to activate windows. The laptop has been pre-installed Win 7 Pro and Media attached to Win 8 Pro. In notebook isn?t COA label. When you generate the code and enter it into the activator appears information - error 0xc004f063 computer bios is missing required license. Microsoft, I was told that my product key is required to supply a computer manufacturer. Please help, I could turn the system on and work again. Thank you very much

1 more replies
Answer Match 51.24%

Hi,

I encountered some problem with my netbook (Portege M800-10W) after updating BIOS.
The BIOS updating program seems to failed. Then my Netbook automatically restarted and now I can't start my PC anymore.
All the LEDs turns on, but the sreen remain black and after few minutes, the netbook beep 3 times (1 long, 2 short).

How can I restore the BIOS to the previous version (or factory version) ?

Thanks.

Adrien

null

A:Portege M800 doesn't startup anymore after updating BIOS

I think that error code means there is a Graphical/Video problem. The Mainboard or VGA Board may need replacing, or there may be a loose connection.

I would send the notebook to an ASP for repair.

5 more replies
Answer Match 51.24%

Hi,

I want to update my laptop bios 3.40 with the version (BIOS_V390_ECV160_WIN) , it shows me an error message :
TOSHIBA BIOS Package Ver.4.2.1

"This computer in not supported"


Why!!!!!

A:Re: Bios update Toshiba Portégé R830-1DR (PT321E-0G401EFR)

Check this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65519

try the update to v3.60 before trying the v3.90

By the way: Does VAP (value added package) is installed properly? This package is very important for BIOS update

3 more replies
Answer Match 50.4%

Bios works fine. but after the second screen, then where the table of summary appears.after this updating ****** should appear and windows should start loading....but no such thing happens. everything on screen is blank. cant get ot safe mode. can boot with CD but cant repair. last week i reinstalled video card drivers after it crashed. it as working fine uptil last night. Help.
 

A:Nothing appears on screen after BIOS

7 more replies
Answer Match 50.4%

Right my BIOS was on 1.20 when I went to Toshiba website to get the drivers to install and found the BIOS update so I followed the instructions burn it to a floppy disk the last one I have and away I went but after the update I noticed that xp said it was running at 600 MHz not 1,2ghz.

So I used cpuid to see if it was xp but it shows the processor as running 598.6 MHz and can flux to 600.4 MHz max so I went into the BIOS tried CPU max disabled CPU sleep and rebooted so then I thought it was xp so I reinstalled but still the same I used Suse Linux still the same.

I?ve reflashed the BIOS with 1.50 through windows rebooted still the same. I am getting on where and this is getting silly I even went and found all BIOS versions from the Toshiba American site which goes back to version 1.10 to 1.50 so I tried all of them. Nothing!

I am really baffled at this can anybody sort this out it is really annoying and slow.
Thank you in advanced

A:Portege M100 - Processor Stuck on 600Mhz, have tryed every BIOS version

Hi

Just one question; was the motherboard replaced in the past?

As far as I know after the motherboard replacement the test & diagnostic should be performed in order to update the CPU microcode on the PCB.
If the microcode is not updated then your CPU would stuck at 600Mhz.

In order to update the microcode, the ASP must be contacted.

The other reason why the CPU runs only at 600Mhz is the low CPU processing setting in Toshiba power saver.
Check if the Toshiba power saver is installed on your notebook and set the options to a higher level.

Check it out?

2 more replies
Answer Match 50.4%

Portege R830/PT321E: Bios Update stops with "An error occurred while preparing the update environment..."

Following message seems at first

BIOS Version: Current Ver. 3.40 -> Updated Ver. 3.70
EC Version: Current Ver. 1.30 -> Updated Ver. 1.50
Bios and EC should be updated

During the BIOS update seems following message:

+An error occurred while preparing the update environment. You have not given permission to execute the update.+

My settings:
- BitLocker is switched off.
- No connection to a docking station
- Windows 7 is installed
- Boot mode is on? I guess it means:
"Closes all open programs, shut down windows, and then turns off your computer."

Any idea what the problem is?

Message was edited by: ML

A:Portege R830/PT321E: Bios Update stops with "An error occurred while..."

Hi ML

Maybe stupid question now but why do you want to update BIOS on this, I think, pretty new notebook model?
Have you noticed some issues or hardware problems?

17 more replies
Answer Match 49.98%

When ever I go onto a site to sign in, I don't know why my password (the words) appear instead of the black dots showing to hide the password?? if that make sense! Can anyone tell how can I hide my password from showing? thank you!!

A:password appears instead of black dots

I had forgot the mention I can't sign onto the site that I am trying to log onto:(

19 more replies
Answer Match 49.98%

hey ive been having a problem with my external hdd which im now trying to run as an internal one.

basically yesterday it was working fine as an external then i started to get " delayed write failure " or somethign like that and couldn't save E%$£ file.... and everytime it did this more files would disappear from the hd.

I tried to run a diskcheck on it and it crashed half way through.. when i restarted the pc, the hd was no longer appearing and every now and then if i restarted it i could get it to show up in my computer but the hd was completly empty and also whoing it was now RAW.

Someone suggested mounting it internally which i did, and as soon i startedu up great my xp recognized it and installed it and i thought it was going to work... then the delayed write failure hting popped up again and boom gone from my computer.... and since then its being recognized in bios as a slave driver... but cant be found in device manager, disk management or by any programs like test disk.. nothing only in bios.

is there anythign that can be done as i have like 10 years of recorded music over time built up on it... the hdd aint that old but i transferred at some point from pc to it


thanks
 

A:External HDD that's now internal only appears in BIOS?

anyone got any ideas even if its long shots im willing to try just about anything

thanks
 

1 more replies
Answer Match 49.98%

The BIOS screen on my relatively new JNCS custom-built computer has always had a VERY fast BIOS screen -- used to last only 1/2 sec. I have no idea what changed, but about a week ago it became SO fast that it's just a "flick" -- the human eye doesn't see it. It's lucky that I know the key to open the BIOS on bootup is F2; otherwise, nothing appears on screen that tells you that. I have checked and rechecked the BIOS Boot tab for something that increases the BIOS screen display time, but can find nothing.

Anybody have any idea how to increase the BIOS display time? Motherboard is Intel DQ35JO with E8400 Core 2 Duo CPU, 2GB RAM. OS is XP SP3.
 

A:Solved: BIOS screen never appears

11 more replies
Answer Match 49.56%

I have two machines that I've installed Windows 7 Professional 32-bit on and I'm having the same problem on both. When I turn on my computer it goes to the login welcome screen and stops. I have to click on my picture for it to continue logging into the desktop. I have no password and only one admin account set up on either one. I tried setting up the auto login using netplwiz in the search bar but it doesn't do anything. I set up a password and set up the autologin and it didn't work on either machine. So now I'm back to no password and in need of help. Anyone got any ideas?

A:Login Screen Appears with no password and one account

Log On Automatically at Startup

Start
Run or Search
netplwiz

de-select option

.

4 more replies
Answer Match 49.56%

My younger brother's daughter gave him a desktop about a year ago which runs Windows 2000, but he didn't get around to setting it up until just yesterday. While it was booting up, the logon window appeared with the username name but no password. He contacted his daughter, but she didn't remember what it was. In desperation, he contacted me to see if I could resolve the problem. I've never used Windows 2000, so I'm not sure how. I've read Microsoft's KB article #258289 and forwarded to him, but I'm not sure if it'll help him.

--------------------------------------------------------------------------------------
 

A:Logon Window Appears And Password Is Unknown

Here try this link -

http://home.eunet.no/~pnordahl/ntpasswd/
 

1 more replies
Answer Match 49.56%

I have an X1 Carbon 20BS-CTOWW.  I use a hard drive password and authenticate with the finger print reader.  Sadly, I forgot the hard drive password I set so I rely on my fingerprint. Last night I restarted my laptop.  When it booted, it asked for a power on password.  I did NOT set a power on password.  Strangely, the power on password will authenticate with my middle finger, but not my index finger.  Once the power on password is authenticated,  I am asked for the hard drive password.  However, the finger printer reader is not active at this point, and as I mentioned, I forgot my hard drive password. I tried resetting the laptop by using a pin in the reset hole on the back of the laptop.  This did not solve the issue. What would cause a power on password to suddenly appear.  I have NOT been in the BIOS for months!  Any suggestions for how to resolve this issue?  Thanks! 

More replies
Answer Match 49.56%

Began having problems with popups despite having Norton installed. While attempting to remedy that issue, a user control box would pop up with the account name "temporarory" (spelled that way), and asking for administrator password for any attempted system changes or attempting to run antivirus programs. 
This is my sister's computer, and either she or someone has run FRST in the past. I was unable to run a fresh download, as Norton would remove it as soon as it was downloaded. But, the old FRST file (from July) seems to work just fine.
I also cannot shut Norton off, because of the admin password issue.
Here are the logs from FRST scan.
 
 
Scan result of Farbar Recovery Scan Tool (FRST) (x64) Version:29-08-2015
Ran by Speed (ATTENTION: The user is not administrator) on SPEED-PC (29-08-2015 20:56:59)
Running from C:\Users\Speed\Downloads
Loaded Profiles: Speed (Available Profiles: Speed & temporarory)
Platform: Windows 7 Home Premium Service Pack 1 (X64) Language: English (United States)
Internet Explorer Version 11 (Default browser: IE)
Boot Mode: Normal
Tutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/
 
==================== Processes (Whitelisted) =================
 
(If an entry is included in the fixlist, the process will be closed. The file will not be moved.)
 
Failed to access process -> smss.exe
Failed to access process -> csrss.exe
Failed to ... Read more

More replies
Answer Match 49.56%

Yesterday my PC was working perfect. Zero problems. I shut it off for the night, then turn it on this morning. The BIOS image appears, and then it goes to a black screen. I can't do *anything*. I've tried putting in the Windows disc to try repairing, but it won't let me boot to the disc. There's never any option to. I've tried spamming F8 for safe mode and Delete/F2 to enter the BIOS, but nothing changes. It goes straight to the black screen.
Any help in resolving this issue would be much appreciated.
Specs:
Windows 7 Home Premium
Intel i5 processor
gtx 970 Video card
16gb ram
Asus p8z77-v pro motherboard
EDIT: Probably should've done this in the first place. Unplugged everything but the power and monitor cables and it works now.

A:Bios image appears, then black screen

Feedback appreciated...happy computing .
 
Louis

6 more replies
Answer Match 49.14%

Trying to reset the password on and old C400, it is asking for primary or administrator password. I have no idea what to put in there, and can't see if  the computer will function at all!  Any help would be greatly appreciated!  Thanks! 

More replies
Answer Match 49.14%

I have a Dell Latitude D630. It has an admin password for the bios. Nothing is locked except for the settings. I can't change any of the settings in the bios. It lets me boot to windows just fine though. My question is, since I don't know that admin password for the bios, if I upgrade the bios firmware, will the admin password be deleted? Since I'm flashing the bios, I would think that all the settings will be lost. Is that the case?
 

A:Will upgrading the bios firmware on a Latitude D630 delete the bios admin password?

What?

Didn't you reply here, and say it worked (after the unusual 9th try ) http://www.techspot.com/vb/topic109612-109.html#post747024

Awfully strange!

A bios update can't remove passwords. As You Must Know

Oh and thanks for the extended long Title. I'm thinking this Topic of yours would be best removed? What do you think?
 

1 more replies
Answer Match 49.14%

Windows 7 delays before the password insert BOX appears on startup. This happened after i cleaned the registry for skype and then reinstalled skype. How can i fix it?

A:Windows 7 delay before the password insert box appears on startup

Ive experienced the same issue before and honestly its nothing to get excited about i dont believe. Because windows is finishing flushing out the registry entries that were marked for deletion. As for getting rid of the problem; well there really is no set way per say; to get rid of that as its just the way windows operates I believe(someone correct me here if wrong please)

6 more replies
Answer Match 49.14%

A very long Password is automatically appears when I start my Windows

can someone please help. I am on Lenova Intel Core i5

A:A very long Password is automatically appears when I start my Windows

Did you setup a password for windows ?

Do you no longer want a password ?

What exactly can we do for you ?

2 more replies
Answer Match 49.14%

I clicked on a link to a website, and it immediately started downloading something to my pc. Macafee started popping up dozens of notifications about "Net Win32" trojans being detected and quarantined. Many of the files it refered to looked like normal windows files. I have MBAM already installed and it also popped up a message saying a trojan had been detected. I immediately ran the MBAM scan and it picked up about 14 infections. After the scan, I went to the quarantine tab and removed all the infected items. It then said I had to restart the computer, which I did.
Now my problem is that when restarting, it takes me to a windows logon with the User name "Owner" displayed. I never had a logon enabled on the pc before. Now I'm stuck because I don't know what password it is looking for, and I can't get past the logon window.

Starting in safe mode makes no difference. Nor does "Last known Good Configuration". I always end up at the logon window.

Help!!!

A:"Net Win32" trojan. Now windows logon appears and I don't know password

If there is no password then all you have to do is hit the enter key?

Is that a paid version of MBAM?

11 more replies
Answer Match 49.14%

Hello , I have a Dell Inspiron 530 running Windows Vista Home. I am trying to access the system BIOS and it has a red password log in screen. I tried to guess and enter several log in passwords including  the word DELL and none of them worked. I didn't want to enter too many wrong passwords because I didn't know if the system would lock me out. Can anyone help me by pass the BIOS log in password or some how disable it ? Thank You in advance.

A:Dell Inspiron 530 BIOS is locked with password requesting help to unlock BIOS

Hi WILSPEAK,
Thank you for writing to Dell Community Forum.
Request you to contact Dell team for the BIOS password either via DellTechCenter in Facebook or @DellCaresPRO on Twitter and they will be able to provide you a BIOS password once the ownership of the system is confirmed.
Do reach back for any query.
Regards,DELL-Akshatha MSocial Media and Community Professional#IWork4Dell

3 more replies
Answer Match 48.72%

I have a HP 17-f020us 17.3-Inch Touchscreen Laptop with window 8. I dont what to have to remove the battery to do this. Way to much for me to try to do. I would like to know how to do it through the Bios.
Thank you,
Rhonda
 

A:How do i remove/disable my Bios Password "i know my user password

7 more replies
Answer Match 48.72%

Right before this problem happened, I had suddenly experienced a weird screen glitch and knew to restart my computer. Now, it asks for a BIOS admin or power on password which I did not set. What the heck is going on, and what could I do to fix this??  --WHAT-I-HAVE-TRIED--I have tried "12345"I have tried a blank fieldI have tried "biosPower"-------------------------- --COMPUTER-INFO--Product: HP Stream Notebook 11 (no touchscreen)Product version: 8.1 (x64 architecture)---------------------- If I need to put any more info, just ask.











Solved!
View Solution.

A:BIOS "Admin Password or Power On Password" needed for startu...

@GlitchMasta47? At the password screen, hit enter 3 times and you should receive a halt code - enter this on the site below. https://bios-pw.org/ Regards, DP-K

9 more replies
Answer Match 48.72%

How remove password BIOS(Admin password & canfigure setup),
 

A:Admin password & canfigure setup password in BIOS remouver

Turn off computer. Find the battery on the motherboard. Take it out for a couple minutes. Put it back in and restart computer. This should reset cmos and solve your problem.
 

1 more replies
Answer Match 48.72%

I'm having a problem with a Toshiba Satellite L300D. After I reinstalled the HDD it would beep. To solve this I went into BIOS to look and see if the board had some sort of intrusion setting. When I exited the BIOS and restarted I know get the Enter Current Password (with a blue background on a black screen) with continuos beeps. The thing is it seems to auto enter in 10 characters (*) and then stop. There are no other options.

I have searched unsuccessfully for any info about this and I cant even find where the CMOS is located which I think is soldered onto the board.

Has anybody had any similar experience like this?
I would really appreciate any help its driving me crazy.
 

A:Bios Password 'Enter Current Password' on Toshiba Satellite

Your thread is closed. We do not help with password problems. This is clearly stated in the rules section.
Passwords - Please do not ask for assistance with forgotten passwords and/or bypassing them. As there is no way to verify the actual situation and/or intentions, no assistance will be provided and any such threads will be closed.Click to expand...

Please read and follow the rules when posting.
 

1 more replies
Answer Match 48.3%

For some reason Yahoo is asking for my password EVERY time I try to check my e-mail.
I have it set up to only ask for the password every 8 hours, and that was working just fine until a couple of days ago. Now I'm asked for the password every time, even if I log-in every 5 minutes??

I cleared all the temp. files and cookies, ran the usual virus and spyware applications and cleaned out the registry and defragged. Still, I'm getting the password prompt.
I haven't added another Yahoo account, we only have this one. Nor have we added any other e-mail accounts the past week. I can't think of anything that would have caused this to start up.
 

A:Yahoo e-mail account - Password prompt appears everytime I log on

I found a temporary solution that I'm surprised works:

If I use "My Yahoo" to open my e-mail I am never asked for the password. I can click an e-mail letter to read and it opens the e-mail page right up. Go figure??
 

1 more replies
Answer Match 48.3%

I used NETPLWIZ to bypass windows login.
This worked fine for a while, then all of a sudden the login screen started reappearing but the auto sign in still processed.
It's not a train smash, just annoying.
How can I get the process to take place without the screen appearing?

A:Login screen still appears after removing username/ password required

Turn it off and on again.

Sorry if it is dumb sounding reply but I often have to do it. Tick the box on netplwiz, say OK, untick the box and say OK. Keep repeating this until it works.

I've not changed my MS password for years but it still seems to bug me in the same way now and again and resetting netplwiz always works for me.

0 more replies
Answer Match 48.3%

blue screen appears when i open my pc. What should i do????

A:Blue screen appears say BIOS not fully ACPI compliant what should i do?

Hi rence.slvdr -First, have you changed any settings (BIOS or otherwise) or do you think it may be an infection.Next can you please download BlueScreenView to help us to check your problem (if you can access the internet).If internet is a problem, then it can be loaded to a good working computer and transferred with a USB flash drive.http://www.nirsoft.net/utils/blue_screen_view.htmlUnzip the downloaded file and double click on BlueScreenView.exe to run the program.when scanning is done, go to EDIT - Select AllGo to FILE - SAVE Selected Items, and save the report as BSOD.txtOpen BSOD.txt in Notepad, copy all of the content, and paste it into your next reply Thank You -

2 more replies
Answer Match 48.3%

My compaq mini is asking for bios password:Password Check Failedfatal Error ... Sysytem HaltedCNU9417XGY pls help

A:My compaq mini is asking for bios password: Password Check ...

@Lya_And Enter     e9lov3x4hi     ( Note that in both cases, the 3rd character is a lower case L )                           or                e9lov3xrhi Regards, DP-K

1 more replies
Answer Match 48.3%

Call me a dunce....but I have a problem. I locked myself out of my administrator account and I can't go into safe mode because I also forgot my BIOS password. I really don't want to have to open up my computer and remove the BIOS, is there any other solutions that don't involve turning off my computer?

Im running Windows XP Home Edition Service Pack 3

A:Forgot Admin Password, as well as BIOS boot up password

Hi and welcome to TSF

I am sorry but forum rules prohibits us from helping with forgotten passwords.

A link to our rules can be found at the top of every page.

This post is closed.

BG

1 more replies
Answer Match 48.3%

Hi  Can anyone help me sort a problem out. I cannot for the life of me remember the power on password and now all that shows is system disabled and a code 69468164 Is there a way to clear the old password??? Any help appreicated











Solved!
View Solution.

A:Power On Password lost - Adminsitrator Password - BIOS

@26kenley? Enter     76540160 Regards, DP-K

4 more replies
Answer Match 48.3%

System disabled with code A [A0F9B5A2]

More replies
Answer Match 48.3%

Hello, guys...
Is there such program which decodes or reset the bios password of a Laptop
My laptop in an old Acer Aspire 4715z

I've tried removing the CMOS
But found no jumper. I was suprised that after resetting the CMOS only the Date and Time reset.

I'll be waiting for your replies..
Thanks.

A:BIOS Decoder or BIOS password reset tool

I am sorry, but we cannot help youPer forum rulesNo subject matter will be allowed whose purpose is to defeat existing copyright or security measures. If a user persists and/or the activity is obviously illegal the staff reserves the right to remove such content and/or ban the user. This would also mean encouraging the use or continued use of pirated software is not permitted, and subject to the same consequences.

1 more replies
Answer Match 48.3%

I updated the bios after I had notified from Toshiba about the Bios v3.50. The process was done by the Toshiba Utility software, and after the reboot there is "Password =" on a blank screen and it not recognise my BIOS password, writing "Not certified".

I have also tried the HDD password but no luck.

What can I do now?

A:Satellite Z30-A-12R BIOS password not recognised after BIOS upgrade

Hi

Before trying to update the BIOS, all passwords should be removed!
BIOS password can be removed by authorized service provider available in your country.

But the unknown HDD password cannot be removed anymore.
In such case the HDD isn?t accessible and cannot be used.

Sorry mate but in my opinion you have only one chance to get the BIOS password removed; you need the ASP assistance.

3 more replies
Answer Match 47.46%

I was given a computer to work on and it turns out that her now ex-husband locked it, both the hard drive and the Bios. It is a Dell laptop. She was concerned about what was on the hard drive but I am almost 100% sure there's no way to unlock it???
As for the Bios, my desktop can be bypassed by either taking out the battery or resetting the CMOS jumper. On her laptop I took the battery out but it was still locked. She was hoping I could buy a different hard drive and the computer still be usable.

Any suggestions?
 

A:Bios Password/Hard Drive Password

Sorry no suggestions here, please re-read the rules http://www.techguy.org/rules.html
Passwords - Please do not ask for assistance with forgotten passwords and/or bypassing them. As there is no way to verify the actual situation and/or intentions, no assistance will be provided and any such threads will be closed.Click to expand...

post closed
 

1 more replies
Answer Match 47.46%

I have issues with probook 6360b bios password..i have done everything including removing the cmost battery but nothing happened..i just see cmos reset 502 all the time without accessing the computer..pls help

A:Bios password/Administrative password issue

Dear Customer, Welcome to HP Support Forum and we are glad to assist you. This is to inform you that all HP Business Notebooks such as Probooks  or Elitebooks have more stringent security than consumer models infact they don't produce 'halt codes', the password cannot be derived from the Serial Number and thecode is stored in non-volatile memory so removing the RTC cell will not reset the password in this case. Please have a look at this link. http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-Password-Reset-Utility Replace the BIOS chiphttp://www.ebay.com/itm/HP-Elitebook-8470p-8470w-8570p-8570w-8770w-Programmed-Bios-Chip-No-Password-... Please Contact HP Business Notebook support they should be able to send you a customized SMC.bin file which you can use at boot to reset the password. Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

1 more replies
Answer Match 47.46%

System disabled: 83725401Product: E3S20UA#ABAthanks for any help. I forgot the password and it gives me 3 try's and disables. I cand do anything else on startup











Solved!
View Solution.

A:Forgot my admin password/bios password

@Diesel_lineman? Enter  32683427 Regards, DP-K

4 more replies
Answer Match 47.46%

How to remove BIOS password on Toshiba Satellite Pro M30

Message was edited by: Admin

A:How to remove BIOS password bios on Satellite Pro M30

I'm afraid to tell you, but for this, you have to contact local ASP.
Because it is not that easy or possible the way you would do this on deskopt PCs.

This is why you have to take your machine to ASP. The guys there can remove the password.

2 more replies
Answer Match 47.46%

Quick question - will a keyboard for a Portege S100 work in a Portege M100?

Layout looks similar; albeit a different colour.

A:Will a keyboard for a Portege S100 work in a Portege M100?

Hi

I think you cannot use the same keyboard because the Portege S100 supports the an-easy-to-use 84-key (US) or 85-key (UK) keyboard and the Portege M100 supports the an-easy-to-use 85/86-key keyboard.
Furthermore the connector of the S100 supports the CN3230 keyboard interface 34 pin connector and the M100 supports the PJ3230 keyboard 34pin connector.

So possibly this could be a problem.
I recommend using the original keyboards released for the each notebook model.

1 more replies
Answer Match 45.78%

HOW TO RESET ADMINISTATORS PASSWORD FOR MODEL 15-F010WM

A:ADMINISTRATORS PASSWORD/ BIOS PASSWORD

Hi, At the password screen, hit enter 3 times and you should receive a 'halt code' - post back with this code. Regards, DP-K

1 more replies