Tech Problem Aggregator

Hmmm...cant reach this page

Q: Hmmm...cant reach this page

I have had this issue so much more often the past week with Edge than my entire time using Windows 10. Is anyone else seeing a increase in this? I cant tell if its a wifi problem (all my other devices using wifi are fine) or a problem caused by a recent update or what, but its so aggravating.

Any tricks or suggestions before I just ditch the Edge browser and rely only on Chrome?

A: Hmmm...cant reach this page

Well after installing Chrome I am also having internet problems. So it's not the Edge browser. Must be a driver. Can someone point me in the right direction to see if my drivers are up to date?

1 more replies
Answer Match 63.42%

1. I cannot find a solution for a problem accessing Microsoft forums websites from Windows 10 - IE11 and Edge browsers:
in EDGE - Hmm, we can't reach this page.   IE11 this page can't be displayed.
For about a year it worked at least from Edge. Now both cannot access Microsoft forums. All the other sites are accessible.
I am using a corporate proxy. The same sites are accessible from Windows 7 with IE11.
First I blamed our IE GPO with multiple settings. So for a test I placed my machine in Blocked OU (no IE GPO, proxy is set from different GPO).
Everything what I tried didn't help. The question: why just Microsoft forums (no other sites) are not accessible.
Did couple of tests from Windows 7 IE11 machines. The same Microsoft forums are perfectly accessible (all GPOs are applied).
Suddenly, found that one corporate Web App does the same : "This  page can't be displayed". On other Windows 7 it does work.
I am out of ideas now... cannot blame anymore our GPO or proxy...
Any advice?

--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

More replies
Answer Match 59.64%

I have Windows 10 and get the following message repeatedly when accessing the internet.  How can I fix this issue?


Hmm, we can't reach this page.
Try this

Make sure you’ve got the right web address:
Refresh the page
Search for what you want

A:Hmm, we can't reach this page

Where you able to reach the Dell website yet? If not, can you get to other websites? You can click the link below and choose Windows 10 from the list and follow the information to resolve your connection issue,
Dell Networking and Wireless Support Center

1 more replies
Answer Match 59.64%

I have Windows 10 and get the following message repeatedly when accessing the internet.  How can I fix this issue?


Hmm, we can't reach this page.
Try this

Make sure you’ve got the right web address:
Refresh the page
Search for what you want

A:Hmm, we can't reach this page

Where you able to reach the Dell website yet? If not, can you get to other websites? You can click the link below and choose Windows 10 from the list and follow the information to resolve your connection issue,
Dell Networking and Wireless Support Center

1 more replies
Answer Match 59.64%

1. I can access On this page you need to enter member number and pin code.
2. Enter any member No and pin code and login
3. Box indicates 'you are about to view pages over a secure connection'. Click OK
4. Requested page does not display. Status bar first indicates 'Opening page', then changes to 'Connecting to', and finally 'Done', and displays a page saying 'Page cannot be displayed'

I use windows XP Professional with Service Pack 2 and Tiscali broadband. This same problem exists at 4 Tiscali broadband site I have checked in this area, but works OK at an AOL site, and also at 1 Tiscali broadband site a few miles away.
Can you suggest what I should do to be able to view the login page?
This is not a security or firewall problem, as the problem is present even when antivirus and firewall are turned off. As the site is accessible from another site, it does not appear to be a security problem. I can access the secure bank sites.

A:cannot reach a particular web page

I can get to first link but second IP comes as unavailable. Perhaps the page is generated uniquely based on input you provide when logged in and cookies you have on your machine. If you have a bad cookie or temp internet file the page cannot be generated. Try emptying temp internet files and deleting cookies.


inetnum: -
netname: Qatar-Airways-13443
descr: Qatar Airways-13443
country: qa
admin-c: AS8416-RIPE
tech-c: JL2798-RIPE
mnt-by: QTEL-NOC
source: RIPE # Filtered

person: Azam Shaikh
address: Qatar-Doha-Qatar Airways-P.O.Box22550
phone: +974-4496436
fax-no: +974-4496494
e-mail: [email protected]
mnt-by: QTEL-NOC
nic-hdl: AS8416-RIPE
source: RIPE # Filtered

person: Justin Lazar
address: Qatar-Doha-Qatar Airways-P.O.Box22550
phone: +974-4496436
fax-no: +974-4496494
e-mail: [email protected]
mnt-by: QTEL-NOC
nic-hdl: JL2798-RIPE
source: RIPE # Filtered

% Information related to ''

descr: Q-Tel New Allocation Block
origin: AS8781
remarks: Qatar ISP New Block - QA-QTEL-20020516
mnt-by: QTEL-NOC
source: RIPE # Filtered

1 more replies
Answer Match 59.64%

This post is in regards to a website that I'm attempting to access. Within the email there is a highlighted link "Store" where I access a link to purchase my photos.. Clicking on this link Message reads Cannot reach this page, Refresh or Search. Clicking on Refresh nothing happens, click on Search brings up all the connecting websites but each one I try to open they all show the same. Cannot reach this page. This website is the only one that shows that. All others such as My Bank , Kaiser etc all open without incident. I do not understand this .I tried everything I even sent an email to this company about this issue The email could not be sent either , Up until today I have had no problems with this company/website. What happened, and Why? I have Windows 10 Microsoft Edge

A:Cannot Reach this page

1) Right click the link, click on Copy Link, and paste it in the address bar. Does it look like a valid website link?
2) If so, search for, and open, on your computer
and paste that link there and try it, does it work?

0 more replies
Answer Match 58.8%

Only happening with this one particular website, and NOT having this problem with any others; just this single one:

Hmm, we can't reach this page.
Try this
Make sure you’ve got the right web address:
Refresh the page
Search for what you want

That is when using Edge.  Similar type of messages happen when trying to get to the same page in Chrome and in Internet Explorer.  I changed the website name, giving a fake one instead of the real one.
My guess is that something is wrong at the website's end and not at my end since I can reach all other sites; just not one particular one.  Any good way to check on this?  Any other way of testing the vaidness or health of the website?
-  Just went to a different computer and tried the website again.  Same message, that site can not be reached, refused to connect.  The website must have the problem.

A:browsers say, "can't reach this page"

Try this.

2 more replies
Answer Match 58.8%

I've set Google as my search provider in Edge. If I open a new tab and type where it says: Search or enter web address, I get:

Hmm, we can?t reach this page.

Try this
?Make sure you?ve got the right URL: http://windows%207%20iso%20download
?Refresh the page
?Search for what you want

If I click on the last option, a search opens in Bing.

This is driving me crazy!

A:Edge: Hmm, we canít reach this page?

Does Google look ok as the default search provider in advanced options?

I just tried

Went to Google home page
brought up settings\advanced
clicked the drop down for search box and selected add new
it showed me google was available and I clicked add as default

are these the same steps you took?

19 more replies
Answer Match 58.38%

?Constantly receive this message when on the internet...on a brand new H50 desktop?? Hmm, we can't reach this page.Try thisMake sure you?ve got the right web address: http://www.puritan.comRefresh the pageSearch for what you want

More replies
Answer Match 57.54%

We have 2 wired pc, and a laptop. The PCs are Acer3100+, 1.8ghz, 1G ram, connected via ethernet to a wildblue modem. I have just installed a Belkin wireless router, model F5D 6231-4, that I bought on ebay. Both pcs will go online, a little slower than before, but my big concern is that when I run a cmd, ipconfig/all, my IP address dosen't match what they say. Belkin says it should be 192.168.1, and I get, in this range. They said to configure router, but when I enter that page address, I get the notice of a network error. I don't know enough about this to know if this is a security issue or not! If I manually enter the numbers that Belkin should be , I get the correct address in an ipconfig, but I cannot get to the page, or get online. What have I done wrong!!!!

A:Can't reach Belkin configuration this a problem???

the Belkin default address is

you're apparently wired like

the WAN side address will be set by your ISP, not belkin and might well be, but none of your PCs will see this using IPCONFIG /ALL --
they will see the LAN side addresses. IPCONFIG will show the DHCP address
given to that specific machine. the LAN side address of the belkin should be
the default above, and thus your PC addresses will default to something like

use one PC to access the router config using your browser
IF NECESSARY, you can change the default router address and the range of IP
addresses that will be assigned to your PCs.

you should absolutely change the admin password

2 more replies
Answer Match 57.12%

Computer turned off in the middle of windows update. Now computer can?t get to homepage. Tried all F1-F11 options and received BSOD (Error code: 0x000000F4). Went to windows tech support and all of their tests point that it?s an HP issue. If problem persists, BSOD indicated to disable/remove any newly installed hardware/software and to disable BIOS memory options such as caching or shadowing. Ran all available HP tests (Memory, hard disk, run-in, start-up, and battery). All passed except for battery (failure ID: 9C0c13-00089U-Xd6V5G-C0F603) and run-in (failure ID: 9C0C13-00089T-XD6V5G-C0CN03) tests and both failure id description for these two said, ?Primary battery.? Computer was working just fine before this issue. Please help.

More replies
Answer Match 49.56%

Hello everyone.
I am currently experiencing an error everytime I use my Microsoft Edge. Whenever I try to go to a site, I always end up with this error. The weird thing is, this issue only happens on certain websites (such as Facebook and Yahoo currently) and sometimes with Google. It likes to disconnect me often and I really don't want to have to deal with this issue anymore.

My internet works fine as my laptop (which I'm currently on) and phone can connect to it without issue. I don't know why it doesn't work on my desktop especially since its internet is Ethernet.

I tested this on other browsers to see if it was only on Edge but it turns out that chrome and firefox experience the same issue with different sites as well. For all three, I haven't been able to go on Facebook and Yahoo, and sometimes Google.

I know the problem is from my end because clearly, the sites are up. Is there any way to solve this or has anyone else found a solution to this?

I'm running Windows 10.

I've tried the following:
- ipconfig / flush
- ipconfig / reset
- ipconfig / release
- ipconfig / renew
- clearing caches and browsing history
- a full scan for malware using malwarebytes and windows defender, already removed/quarantined all threats, did this multiple times to ensure there were none left
- reinstallation of chrome and firefox and a reset of edge
- ipv4 - changing preferred and alternate dns address to and respectively
- checked to see if a proxy was ... Read more

A:"we can't reach this page" error

Hi. Welcome to TSF.

You mentioned threats were found by Windows Defender and Malwarebytes. Were they actually malware or just PUPs? A broken Internet connection is one of the common after-effects of a malware infection, and post-infection repairs need to be done, assuming all of the infections have been cleared. I advice seeking a clean bill of health from the virus removal section, and after they declare your system free from infections, come back here and we will advice further if the problem isn't cured.

1 more replies
Answer Match 44.52%

Hi guys and girls, can someone tell me what this is? I have never noticed this before.

O2 - BHO: (no name) - {6D794CB4-C7CD-4c6f-BFDC-9B77AFBDC02C} - C:\WINDOWS\system32\nnnonoo.dll
O20 - Winlogon Notify: nnnonoo - C:\WINDOWS\SYSTEM32\nnnonoo.dll

Thanks in advance.

A:Hmmm Help Please

Hello Diedtrying and welcome to Bleeping Computer. You are dealing with the newest version of the infection called Vundo - luckily we have a fix that should work to remove it. However, before I give you the instructions, please can you post your full hijackthis log and I can see if there are any other issues that need cause for concern, before we tackle Vundo.David

22 more replies
Answer Match 44.52%

I have a Dell Inspiron 1721 64bit 4gig laptop. Three nights ago I saw i had two updates available one being Microsoft Silver Light download and internet explorer 9beta.

I let them download and install and decided to have it wait 20 minutes before it restarts so i can watch the Rock return on monday night raw segment via youtube.

After I was done, it restarted I walked out the room, came back and saw a lit up black screen. I figured it was installing the update or finish restarting and loading up. So i went made a sandwhich watch smallville came back an hour later only to find that it was still dark.

I powered it off and back on, the screen lit up but it was just a black screen. The CD tray light is lit but won't open, the fan starts up momentarily and then stops, the power light is on. I waited tried it again, finally it boots goes to windows, saying its finshing the update, it finishes I log in, black lit up screen again.

I restarted and it won't give me a dell screen just goes black again like what i first mention, sometime with a light sometime with no light. Sometime it'll show the dell screen like its gonna boot up then goes black. Lately its just starts like it gonna start and then the fan stops lights still lit but has a black screen with no light.

So i hit the power button and the FN key and this is what i got: the num lock and cap lock light blinking and the last light by the power button solid.

Dell charged me 62 bucks to only run the same te... Read more

A:Hmmm This should be fun...

Have you tried system restore?

9 more replies
Answer Match 44.52%
Q: hmmm?

hi there..
i was wondering what is the normal temp for a Geforce 7800 gt card ,i just turned on my pc and the temp is 53c is that normal?
also how can i make sure that i have the right drivers for my pc ,like my nforce becouse i m not sure if i installed the right ones?


15 more replies
Answer Match 44.52%

Alright, I'll give you a short histroy of what has happened in the past few days.

I recently bought Half Life, and installed, played, bla, bla. It froze a few times on me, and crashed to the desktop. Sometimes I only get a bad resolution and limited colors, and sometimes a black sreeen. I rebooted today after another crash, and the taskbar is gone, stardock has reset, and I thinka few other things are quirky. So pretty much I have no theme. It loads up the first few seconds, then disappears. I tried a System Restore and tried to load up explorer.exe again, but nothing. It could always be a virus, but I check at least once a week, and no problems whatsoever.

I've never had this happen to me, what could be the problem. Just in case, here's a HJT log.

Logfile of HijackThis v1.99.1
Scan saved at 10:51:38 PM, on 12/5/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\... Read more

A:Hmmm, this is really bad (A lot is gone!)

System information as to video and sound as well as memory would be more useful in
dealing with Half Life or Half Life2. Is it the Steam/Valve here? HL and HL2 both place large demands on the system resources including memory.

The above link is for support information as well as inquiries. The different support tips
may or may not work for various systems. This is typical with many of the newer style
games where system configurations have to be made suitable for the demands.
Review these to see if they help.

3 more replies
Answer Match 44.52%

Hey all!a younger sibling, , recently visited a site (trying to download a wallpaper or something?) and now there are repeated popups and i could use some help getting rid of them .. heres my HJT logLogfile of HijackThis v1.99.1Scan saved at 8:13:51 PM, on 1/23/2006Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\System32\$sys$filesystem\$sys$DRMServer.exeC:\WINDOWS\CDProxyServ.exeC:\Program Files\Norton AntiVirus\navapsvc.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Common Files\Symantec Shared\Security Center\SymWSC.exeC:\WINDOWS\Explorer.EXEC:\PROGRA~1\NORTON~1\navapw32.exeC:\Program Files\Messenger\msmsgs.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\MSN Messenger\msnmsgr.exeC:\Program Files\Internet Explorer\iexplore.exeC:\Program Files\Common Files\Microsoft Shared\Source Engine\OSE.EXEC:\DOCUME~1\Char\LOCALS~1\Temp\Temporary Direc... Read more

A:Hmmm? I Could Use Some Help

Download L2mfix from one of these two locations: the file to your desktop and double click l2mfix.exe. Click the Install button to extract the files and follow the prompts, then open the newly added l2mfix folder on your desktop. Double click l2mfix.bat and select option #1 for Run Find Log by typing 1 and then pressing enter. This will scan your computer and it may appear nothing is happening, then, after a minute or 2, notepad will open with a log. Copy the contents of that log and paste it into this thread.IMPORTANT: Do NOT run option #2 OR any other files in the l2mfix folder until you are asked to do so!* Note: If you receive an error while running option #1 like: ''C:\windows\system32\cmd.exeC:\windows\system32\autoexec.nt the system file is not suitable for running ms-dos and microsoft windows applications, choose close to terminate the application.."...then do one of the following:1: Click on the l2mfix.bat again and choose option # 5 for Fix Autoexec.nt/cmd.exe error.2: Alternatively, you can click the fixautont.html link in the l2mfix folder and follow the directions there to fix it manually.Do not run the fix portion without fixing the error first.After you have performed the procedures to fix the error, repeat the steps above to run option #1 for Run Find Log.=================Sorry - HiJackThis is runing from a temp directory and must ... Read more

7 more replies
Answer Match 44.52%

OK well ive been having probs with my comp WIN 98se was wondering, i have an extra comp, we think theirs sumtin wrong with the power supply.Its a Antholon with Win XP. I was wondering if i would be able to swap anything over from the extra comp to mine to turn it into XP? would that be possible?... I have Belarc Advisor on my comp that im having probs wit so i cant get to teh specs of my comp...The systemax (extra comp) is about 2 years old or a lil older, but worked great when it started shutting down cause we think that it was overheating or something else, not sure...If its possible how would i go about doing it?

A:hmmm...Could I?

It really depends on your computer specs ans weather or not one motherboard supports what you want to swop over.

If each motherboard supports equally the same, you can swop what you like.

Stuff you can swop without motherboard support usually are CD/DVD drives/ Graphic cards etc.

CPU / Memory etc - check your board specs.


1 more replies
Answer Match 44.52%
Q: hmmm

I installed RAM on my mom's and sister's computer. I had a router set-up for them and it worked fine prior to the RAM installation; Now the router's not recognizing the 2nd computer.

I didn't mess with the router or the router's connections...still no joy. Any ideas?

It's a NetGear RP614v2.

Direct connection from the router to the second computer.

Thanks all!


So, did you do the basics already. What have you tried so far.

3 more replies
Answer Match 44.1%

I could use some help from somone proficient in vista. I have 4gb of ram and I tried to put in the secret code that allows me to use the product as it was intended. Yes im talking about 945149 aka 332896. My problem is this. Even after the secret code I can't get it to funzip. Im reading error code 40. Anybody know what error code 40 is? Any body know a back door into the secret codes that make vista work????? I loaded a lot of the updates that are on the arrons list but did not know saving them to apps was not enough. I was supposed to open them with the secret code. I think I have about twenty that I will need a back door for. So for now can anyone explain error code 40 or get me into 945149. I do have the password straight from Hotfix. Hurry it's only good for a few more days. PLLLLLeeease!!!!

More replies
Answer Match 44.1%

Hiya, i seem to have some probs on pc , i used a proggy called aports to have a look what was going on and msnupdateit.exe was using loads of porst, here is my highjack log that has been analysed by KRC HijackThis Analyzer.exe

Log was analyzed using KRC HijackThis Analyzer - Updated on 4/1/05
Get updates at

***Security Programs Detected***

O4 - HKLM\..\Run: [AVG7_CC] C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe /STARTUP
O4 - HKLM\..\Run: [AVG7_EMC] C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
O23 - Service: AVG7 Alert Manager Server (Avg7Alrt) - GRISOFT, s.r.o. - C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
O23 - Service: AVG7 Update Service (Avg7UpdSvc) - GRISOFT, s.r.o. - C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe


Logfile of HijackThis v1.99.1
Scan saved at 17:41:54, on 21/04/2005
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\Program Files\BT Voyager\BT Voyager Wireless\WLM.exe

O4 - HKLM\..\Run: [DC1300 Monitor] C:\Program Files\DC1300\DCMnt1_0\DC1300mi.exe
O4 - HKLM\..\Run:... Read more

A:msnupdateit.exe ,hmmm

Hi and welcome to TSF.

I am currently reviewing your log. Please note that this is under the supervision of an expert analyst, and I will be back with a fix for your problem a.s.a.p

You may wish to Subscribe to this thread so that you are notified when a reply has been made.
Click Thread Tools then Subscribe to Thread.

Please be patient with me during this time.

4 more replies
Answer Match 44.1%

Hey does anyone know what is causing the problems with the 7900gt? I had that card 2 times and all it did was give me problems. I wish that i could buy that card and not worry, now I have transformed into an ATI fanboy, just on stability haha. Anyone up for explaining?

A:7900gt hmmm

how can anybody explain what may have caused the problems when you haven't told us what kind of problems you were having?

4 more replies
Answer Match 44.1%

This has been going on for awhile, but since I only reboot every few days I've tolerated it.

When I try to shut down/reboot, it takes minutes for anything to happen, and I often have to do it twice to get the PC to do anything.

I'm running XP/SP1 with all the current updates. I've run the usual checks - AVG, Spybot, AdAware, etc, and did run a HiJackThis last week but didn't see anything unusual.

Suggestions on what to check next?


A:Hmmm... why won't my PC shut down?

i had a problem like that at one time and a guy i know started it in safe mode because there was a lot of stuff in the background making it so that it wouldn't shut down

2 more replies
Answer Match 44.1%

Last few days, my free AVG antivirus has been spotting several trojans, I send them to the virus vault; however, one just popped up now. here is my log. thanks Logfile of Trend Micro HijackThis v2.0.2Scan saved at 5:01:33 PM, on 2/13/2009Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16791)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\Program Files\Netropa\Multimedia Keyboard\nhksrv.exeC:\PROGRA~1\AVG\AVG8\avgwdsvc.exeC:\Program Files\Java\jre6\bin\jqs.exeC:\Program Files\NVIDIA Corporation\nTune\nTuneService.exeC:\WINDOWS\system32\nvsvc32.exeC:\WINDOWS\System32\svchost.exeC:\PROGRA~1\AVG\AVG8\avgrsx.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\System\Ma72Pan.ExeC:\Program Files\Java\jre6\bin\jusched.exeC:\WINDOWS\system32\RUNDLL32.EXEC:\PROGRA~1\AVG\AVG8\avgtray.exeC:\WINDOWS\system32\ctfmon.exeC:\Program Files\Spybot - Search & Destroy\TeaTimer.exeC:\Program Files\Trillian\tri... Read more

A:Trojan hmmm

Hello Daneziperski,Sorry about the delay. If you still need help, please post a new HijackThis log to make sure nothing has changed, and I'll be happy to look at it for you.Thanks,tea

2 more replies
Answer Match 44.1%

Well a friend had given me this link to DL the HJT and go to this site and post a log of whats going on and what not... im new so I dont know that much about what to do but I got the jist of it when she told me what to do...Logfile of Trend Micro HijackThis v2.0.2Scan saved at 5:16:16 AM, on 2/14/2009Platform: Windows Vista SP1 (WinNT 6.00.1905)MSIE: Internet Explorer v7.00 (7.00.6001.18000)Boot mode: NormalRunning processes:C:\Windows\system32\taskeng.exeC:\Windows\system32\Dwm.exeC:\Windows\Explorer.EXEC:\Program Files\Windows Defender\MSASCui.exeC:\Windows\RtHDVCpl.exeC:\Program Files\Synaptics\SynTP\SynTPEnh.exeC:\Program Files\Common Files\Symantec Shared\ccApp.exeC:\Program Files\Launch Manager\LManager.exeC:\Windows\ehome\ehtray.exeC:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exeC:\Program Files\Windows Media Player\wmpnscfg.exeC:\Windows\System32\mobsync.exeC:\Program Files\ATI Technologies\ATI.ACE\CLI.EXEC:\Windows\ehome\ehmsas.exeC:\Acer\Empowering Technology\ENET\ENMTRAY.EXEC:\Acer\Empowering Technology\EPOWER\EPOWER_DMC.EXEC:\Acer\Empowering Technology\ACER.EMPOWERING.FRAMEWORK.SUPERVISOR.EXEC:\Acer\Empowering Technology\eRecovery\ERAGENT.EXEC:\Pr... Read more

A:Hmmm newbie in need of some Help!

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a description of your problem, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.comDDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the instructions that pop up for p... Read more

2 more replies
Answer Match 44.1%

it's really bugging me. See, being a superficial teenager, me and my friends sometimes find it fun going on sites like and rating people. But, these paste few days, we keep getting this message:

Microsoft OLE DB Provider for ODBC Drivers error '80040e07'

[Microsoft][ODBC SQL Server Driver][SQL Server]Error converting data type varchar to numeric.

/rateapix/rate_submit.asp, line 49

Whenever we click on a number to rate someone. Is this a website problem or is it just my wacky computer again?

A:Hmmm....this might be a TAD silly, but...

Tis a problem with their website.

3 more replies
Answer Match 44.1%

I recently downloaded HJT and am curios to what the log file is trying to tell me.. well here is the report

Logfile of HijackThis v1.99.1
Scan saved at 7:05:11 PM, on 2/16/2006
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\Program Files\Speed Disk\nopdb.exe
C:\Program Files\Intel\Modem Event Monitor\IntelMEM.exe
C:\Program Files\Spyware Nuker 2004\swn2.exe
C:\Program Files\Java\jre1.5.0_05\bin\jusched.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\Samsung\Digimax Viewer 2.1\STImgBrowser.exe
C:\Program Files\TrueAssistant\TrueAssistant.exe
C:\Program Files\Yahoo!\Messenger\ymsgr_tray.exe
C:\Program Files\Webroot\Washer\wwDisp.exe
C:\Documents and Settings\Owner\De... Read more

A:Hmmm whats up with this....?

Your SEVERLY infected!!

Please follow the instructions on this page MicroBell’s 5 Step Process

Once you complete those steps...repost a new log.

4 more replies
Answer Match 44.1%

Did a HJT scan and found some things I have questions about. Recently my computer has definitely been hit by some malware, I'm just not sure of the damage yet.


Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:07:13 PM, on 11/18/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)
Boot mode: Normal

Running processes:
C:\Program Files\Common Files\LogiShrd\LVMVFM\LVPrcSrv.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exe
C:\Program Files\PC Tools Firewall Plus\FWService.exe
C:\Program Files\Common Files\New Boundary\PrismXL\PRISMXL.SYS
C:\Program Files\ThreatFire\TFService.exe
C:\Program Files\Viewpoint\Common\ViewpointService.exe
C:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exe
C:\Program Files\DriveIcon\DriveIcon.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\Common Files\LogiShrd\LComMgr\Communications_Helper.exe
C:\Program Files\Com... Read more

A:no name/ no file BHO...hmmm

Hi, lisak2


namely this BHO

O2 - BHO: (no name) - {7E853D72-626A-48EC-A868-BA8D5E23E045} - (no file)

Also, why are components of AIM toolbar, PalTalk, and Napster appearing if I've uninstalled these applications?? Hmmm.. Click to expand...

If the programs are no longer n the Add/Remove Programs list, remove the following folders:

C:\Program Files\AIM Toolbar
C:\Program Files\Paltalk Messenger
C:\Program Files\Napster

Lets take a deeper look:

Please download Malwarebytes' Anti-Malware from Here or Here

Double Click mbam-setup.exe to install the application.
Make sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.
If an update is found, it will download and install the latest version.
Once the program has loaded, select "Perform Quick Scan", then click Scan.
The scan may take some time to finish,so please be patient.
When the scan is complete, click OK, then Show Results to view the results.
Make sure that everything is checked, and click Remove Selected.
When disinfection is completed, a log will open in Notepad and you may be prompted to Restart.(See Extra Note)
The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.
Copy&Paste the entire report in your next reply.
Extra Note:

If MBAM encounters a file that is difficult to remove,you will be presented with 1 of 2 prompts,click OK to either and let MBAM proceed wi... Read more

1 more replies
Answer Match 44.1%

Hey everyone,

For the last three days, everyday, I've encountered a BSOD. I'm not quite sure what the causes are but I've narrowed it down to one of two things. A hardware malfunction (I'm just guessing) or an application has been installed that should not.

On 8/24, my computer installed a couple of updates. These are listed below:
-Microsoft Visual C++ 2012 x86 Redistributable (app reconfig)
-NVIDIA PhysX (app installed)
-USB Compositive Device (driver installed)
-USB Input Device (driver installed)
-HID-compliant consumer control Device (driver installed)
-USB Audio Device (driver installed)

I was prompted to restart my computer and the updates installed. Two days later on 8/26, my computer had it's first BSOD. Since then I have continued to experience BSODs everyday.

The biggest reason I've suspected that one of the applications above should now have been installed is because I don't have an NVIDIA graphics card. I have a Radeon HD7870. Although, I'm not sure if this NVIDIA application is used for other uses.

hardware spec info:

-8gb ram (I recently just replaced a stick of ram that had been failing and I suspect the new stick could possible be failing...?)
-Radeon HD7870
-ASRock Z68 Extrem3 Gen3

If any needs more spec info, I can provide it just ask.

As for dump info, I'm not sure how to upload files of it. I have the documented reports on my Windows "Reliability Monitor" Application so here is the inf... Read more

A:BSOD... hmmm

Since you don't have an Nvidia video card you need to remove any and all Nvidia software or drivers. Do you see any yellow exclamation points in the device manager? What version of Windows are you running? Make sure you have the latest motherboard drivers installed, using the ASROCK support website

5 more replies
Answer Match 44.1%

I bought a new 'Kingston Data Traveler G2 16GB' usb stick but whenever i plug it in it comes up as 'Removal Disc G' and wont let me open it? Says i need to format it?

A:Hmmm.... USB not working?

Normally they come formatted in fat32 already. Have seen the problem you have happen on occasion.

Since you have not put any data on it yet go ahead and format it. That should get you going.

3 more replies
Answer Match 44.1%

Hello everyone,

For a while now I have came to this website for help fixing my computer (yes, I am a computer geek :3) and up until now I have had success with fixing any issues that have risen. However, lately no matter what I try my laptop keeps having issues that I cannot explain.
The symptoms I have noticed are:
Slowness and laggyness in general
Programs not responding at all (such as explorer.exe and internet)
Anti-virus scans crashing not only the program but my computer
Random freezes
Random shut downs
I am not sure what to do. I have scanned with multiple programs
Advanced system care (for registry fixes, what I thought this may have been)
Norton Internet security
Spybot search and destroy
Malewarebytes (crashes program and computer, full scan only)
Microsoft Security Essentials (crashes program and computer, full scan only)
I keep my computer well maintained, all programs such as the de-fragger and disk cleaner work fine, no crashes there. I am not sure what to do.

Here are my log files requested by the forum for a new thread:

DDS (Ver_2011-06-12.02) - NTFSx86
Internet Explorer: 9.0.8112.16421 BrowserJavaVersion: 1.6.0_25
Run by Newponder at 13:05:03 on 2011-06-13
Microsoft? Windows Vista? Home Basic 6.0.6002.2.1252.1.1033.18.1982.908 [GMT -6:00]
AV: Microsoft Security Essentials *Enabled/Updated* {108DAC43-C256-20B7-BB05-914135DA5160}
AV: Norton Internet Security *Enabled/Updated* {63DF5164-9100-186D-2187-8DC619EFD8BF}
SP: Microsoft Security Essenti... Read more

A:Hmmm...Possible infection

Hello and Welcome to TSF.

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.


Advanced SystemCare
Wise Registry Cleaner

We do not recommend the use of registry cleaners. Our colleague miekiemoes has an excellent writeup here

We suggest uninstalling them via Programs and Features in your Control Panel.


It appears that you have two antivirus programs installed and running, Security Essentials and Norton. While this may seem like better protection, they can actually conflict with one another and cause system instability or even system hangs.

It may even be the cause of your current issue. Please choose one to keep and uninstall the other via Programs and Features in your Control Panel.

If you uninstall Norton...

Please download the Norton Removal Tool and Save it to your Desktop.Close all programs and double-click the Norton_Removal_Tool.exe then click Run
In Vista/Win7, right-click and choose 'Run as administrator'.
Follow the on-screen instructions.
Restart your computer if asked.
Then delete Norton_Removal_Tool.exe from your desktop.
----------... Read more

15 more replies
Answer Match 44.1%

Hi, this is my first post. I did a hijackthis scan and some of it looks sketchy...thank you--Logfile of Trend Micro HijackThis v2.0.2Scan saved at 4:12:42 PM, on 12/7/2010Platform: Unknown Windows (WinNT 6.01.3504)MSIE: Internet Explorer v8.00 (8.00.7600.16671)Boot mode: NormalRunning processes:C:\Program Files (x86)\Norton 360\Engine\\ccSvcHst.exeC:\Windows\Pixart\Pac207\Monitor.exeC:\Program Files (x86)\Windows Live\Messenger\msnmsgr.exeC:\Program Files (x86)\Spybot - Search & Destroy\TeaTimer.exeC:\Program Files (x86)\DivX\DivX Update\DivXUpdate.exec:\Program Files (x86)\Hewlett-Packard\Media\DVD\DVDAgent.exec:\Program Files (x86)\Hewlett-Packard\TouchSmart\Media\Kernel\CLML\CLMLSvc.exeC:\Program Files (x86)\Winamp\winamp.exeC:\Users\Leo\AppData\Local\Google\Chrome\Application\chrome.exeC:\Users\Leo\AppData\Local\Google\Chrome\Application\chrome.exeC:\Users\Leo\AppData\Local\Google\Chrome\Application\chrome.exeC:\Users\Leo\AppData\Local\Google\Chrome\Application\chrome.exeC:\Users\Leo\AppData\Local\Google\Chrome\Application\chrome.exeC:\Users\Leo\AppData\Local\Google�... Read more

A:Hmmm...sketchy indeed

Do you still desire help?

2 more replies
Answer Match 43.68%

Private Sub Worksheet_Change(ByVal Target As Range)
If Not Application.Intersect(Range("R16"), Target) Is Nothing Then
If IsNumeric(Target.Value) And Target.Value = 1 Then
End If
End If
End Sub

I am having trouble converting this to read the cells.text, can anyone help?
guessing something like [email protected]?!?!?!

Private Sub Worksheet_Change(ByVal Target As String)
If Not Application.Intersect(Range("R16"), Target) Is Nothing Then
If IsText(Target.Text) And Target.Text = "Red" Then
End If
End If
End Sub

A:Solved: Hmmm vba help Excel

16 more replies
Answer Match 43.68%

just a few hours ago my family pulled out the phone line downstairs, rage huh?

And as soon as that happened the speakers of my computer stopped working!!!
ive tried everything unpluggin it etc and lookin into control panel at the sound part...
it says that the speakers are working...
also in the bottom right of bar thing (sorry im not too techy) where the volume thing is, there is a big red X beside it... and it says i have no devices installed, i got no disk with my speakers and i dont know how im ment to install them on it?

any help would be appreciated!
also im running vista... which is near enough a criminal offence for windows... lol

in addition i am not connected to any network on my sky broadband but the internet is still running! and if i try to connect to a network it fails badly!

if anyone can help with these id be a very happy guy!


Ps: this is all thanks to my mother! yay her!!

A:Hmmm sound?? gone!?! network gone too!!

Right click on the X'd out sound icon, click on "Playback Devices". You will see "speakers" tells you the name and if they're working. Click on that area. Choose properties, then set them the General tab, you can enable the speakers you use.In the Advanced tab, click on 'test'.

3 more replies
Answer Match 43.68%

I have been having some issues when I burn movies or audio cd's. I seem to be getting skip issues with my audio cd's and freezing issues with movies. I have uninstalled and reinstalled my Nero burning program and it still has the same issue. I am wondering if there is any way I can test the burning capability of my Dvd Drive.

A:Hmmm wierd issue?

16 more replies
Answer Match 43.68%

I have a second hardrive, I need to acces what was once the desktop folder of that drive. But I can't. I think it's because it's a secondary harddrive, but I dunno. Any help will be appreciated.

A:Hmmm. This is kind of strange. I need help.

6 more replies
Answer Match 43.68%

We are in the middle of a 2 or 3 week 44*C heatwave and I am a bit stressed and worn out - I am too tired to even think clearly.So I'd like it if you could summon your collective brain power to sus my HJT log out for anything odd or nasty.Thanks.Jammit. Logfile of Trend Micro HijackThis v2.0.2Scan saved at 12:04:55 AM, on 3/02/2009Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16762)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\Program Files\Windows Defender\MsMpEng.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Lavasoft\Ad-Aware\AAWService.exeC:\WINDOWS\system32\spoolsv.exeC:\PROGRA~1\AVG\AVG8\avgwdsvc.exeC:\Program Files\NVIDIA Corporation\NetworkAccessManager\Apache Group\Apache2\bin\apache.exeC:\Program Files\NVIDIA Corporation\NetworkAccessManager\bin\nSvcLog.exeC:\WINDOWS\System32\nvsvc32.exeC:\Program Files\Kerio\Personal Firewall\persfw.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\Fast.exeC:\PROGRA~1\AVG\AVG8\avgemc.exeC:\PROGRA~1\AVG\AVG8\avgrsx.exeC:\PR... Read more

A:Hmmm nasty things on PC... ?

Hello JammitWelcome to BleepingComputer ========================Please download DDS and save it to your desktop.Disable any script blocking protection Double click dds.scr to run the tool. When done, DDS.txt will open. Click Yes at the next prompt for Optional Scan. Save both reports to your desktop.---------------------------------------------------Please include the contents of the following in your next reply:DDS.txtAttach.txt. ================Download the GMER Rootkit Scanner. Unzip it to your Desktop.Before scanning, make sure all other running programs are closed and no other actions like a scheduled antivirus scan will occur while the scan is being performed. Do not use your computer for anything else during the scan.Double-click gmer.exe. The program will begin to run.**Caution**These types of scans can produce false positives. Do NOT take any action on any "<--- ROOKIT" entries unless advised!If possible rootkit activity is found, you will be asked if you would like to perform a full scan.Click NOIn the right panel, you will see a bunch of boxes that have been checked ... leave everything checked and ensure the Show all box is un-checked.Now click the Scan button.
Once the scan is complete, you may receive another notice about rootkit activity.Click OK.GMER will produce a log. Click on the [Save..] button, and in the File name area, type in "GMER.txt" Save it where you can easily find it, such as your desktop.Post the contents of GMER.txt i... Read more

1 more replies
Answer Match 43.68%

Sorry but im not sure what its called but I cant use the Dick-Check I belive it would be called that would be performed apon Boot-up or Restart it gives me a error that sais Cannot Open Disk Drive or something if you need more info on this I will get it just let me know please.And this would be the LogLogfile of Trend Micro HijackThis v2.0.2Scan saved at 11:09:56 AM, on 3/9/2009Platform: Windows Vista SP1 (WinNT 6.00.1905)MSIE: Internet Explorer v7.00 (7.00.6001.18000)Boot mode: NormalRunning processes:C:\Windows\system32\taskeng.exeC:\Windows\system32\Dwm.exeC:\Windows\Explorer.EXEC:\Program Files\Windows Defender\MSASCui.exeC:\Windows\RtHDVCpl.exeC:\Program Files\Synaptics\SynTP\SynTPEnh.exeC:\Program Files\Common Files\Symantec Shared\ccApp.exeC:\Program Files\Launch Manager\LManager.exeC:\Windows\ehome\ehtray.exeC:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exeC:\Program Files\Windows Media Player\wmpnscfg.exeC:\Program Files\ATI Technologies\ATI.ACE\CLI.EXEC:\Windows\ehome\ehmsas.exeC:\Windows\System32\mobsync.exeC:\Acer\Empowering Technology\ENET\ENMTRAY.EXEC:\Acer\Empowering Technology\EPOWER\EPOWER_DMC.EXEC:\Acer\Empowering Technology\eRecovery\ERAGENT.EXEC:\Program ... Read more

A:Hmmm Please Help Major Problem

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.comDDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the instructio... Read more

2 more replies
Answer Match 43.68%

So I had Vista for a little while, but ended up mad at it, so I switched back to XP. One of the only things I liked were the games, which I saved to a cd, then saved on my computer once XP installation was over. The problem ( as many of you smarter users may have guessed ) is that Windows pops up and says that none of the Vista games are valid "Win32" applications. So here's my question, is there any way to make any of these games ( at least Solitaire and MahJong ) work on my XP?

A:Hmmm, Vista solitaire on XP?

7 more replies
Answer Match 43.26%

3 problems Don't know if they are related or not.

1) Internet Explorer (6) (Dumped 7 after problems) usually loading pages very very slowly at times taking 30 seconds or more between clicking and seeing any action at all. This also applies to Firefox and AOL. For the record, the other computer in the house runs just fine and at great speeds. Oh yeah, I can download a file quite fast, no problem. My main issue seems to be with navigating between pages and sites. I said usually, because sometimes it zooms along. Using Process Explorer I have tried to find a program in action during these slow downs, but I haven't had any luck nailing anything down.

2) My computer will not restart on its own unless I'm in Safe Mode. In standard shutdown I get a screen that says Windows is shutting down and it hangs there. I have left it for hours AND even overnight.......this always results in me pushing and holding the power button to reboot.

3) I cannot load a critical Windows Update (Security Update for Microsoft .NET Framework, Version 2) It has failed to update dozens of times.

If anyone has the talent to comprehend and repair all of this then you're really something special.

Thanks! Eric

More replies
Answer Match 43.26%

I've had a WD 500G WD5000D032 MyBook Premium for many years and after upgrading to 64-bit Windows 7 Ultimate, I've had the "WD&External_HDD_Button_&_Lights" error in Device Manager since day one and have never been able to correct the problem.

My system drive is all but kaput so I backed up all of my important files and ordered a Crucial 128 GB m4 SATA 6Gb/s SSD with a 2.5" to 3.5" drive converter as a replacement. Why am I telling you this, honestly, I have no eff'in idea! Anyway, I'd rather futz around now just in case something I do causes a problem ; then the failing drive will be affected and not the SSD and I can install the 500G WD5000 MyBook Premium in an error-free fashion to the new system drive.

Does anybody have a solution because I don't want to replace a drive that works perfectly fine, except that it runs 24/7 and turns on all by itself after I turn it off. I also don't know if having the yellow warning triangle with an exclamation point in Device Manager will affect the performance of my PC, especially since Win7 doesn't recognize my Nikon digital camera either...

Thanks in advance!!!!

A:Hmmm... WHidInst.exe didn't work for me.

Hello Michael, welcome to the forum

It would help if you were to fill out your system specs
You could try going through this; USB Driver - General Fix for Problems[2]=Hardware%20and%20Drivers

and it would help if you post the error messages, using the snipping tool and the paperclip to upload snips so that we can see them.

3 more replies
Answer Match 43.26%

okay so i just installed everything on my new computer and for some reason my slave drive is a master and has windows installed on it...but my master which didnt is my slave....real confusing but im here typing....local c is my master though thats the thing that gets me...when i boot up it says master WD 80 gb...but local c is my Maxtor 20gb....

my question is how do i get usb drivers for my computer and how do i know which ones to get/???

Gigabyte GA-K8NSC-939

A:okayyyyyy hmmm kinda wierd

Go to you're manufauters website and download chipset drivers and install them.

7 more replies
Answer Match 43.26%

Ran a TROJAN HUNTER AND it is showing SCANREGW.EXE as a possible TROJAN. I do know that scanregw.exe is needed as a part of WINDOWS, but seem to recall that this can also be a trojan horse?How do you tell the difference? Should I delete or not?

A:Solved: SCANREGW.EXE.....hmmm, VIRUS OR NOT?

16 more replies
Answer Match 43.26%

Have a cable modem with 4 computers on a hub/router. WHen I powered up this morning, I was able to interenet connect with only 2 of the 4 computers. I switched ports on router/hub and same result. Anyone got the time to walk me through the process of finding why I do not have connection on these two computers.? THey connected fine for 6 months or so, just suddenly stopped connecting.

A:Lost 2 Computers On Network...hmmm

6 more replies
Answer Match 43.26%

well I had this error when I wanted to play my MMORPG: Fiesta

Umm I'm really new at these forums and please excuse me for my noobieness -_-

It said something wasn't installed properly... and then I returned... and then I restarted the game...

can someone help me pretty please?

More replies
Answer Match 43.26%

My sister told me about this. I live in Northern CA and there wasn't anything in my paper on it.....

Tech News - Cleveland Plain Dealer Newspaper

Software designer sets his sights on revolutionizing computers


Associated Press

San Francisco - A few hundred thousand lines of computer code could revolutionize the way people interact with computers, say its unlikely inventor and his backers.

Denny Jaeger, a musician and composer who spent the past decade developing the software, will unveil it Jan. 15, when people will be able to download a scaled-down version for free.

The software, called "No Boundaries Or Rules," or NBOR, includes an intuitive user interface for writing, drawing, compiling multimedia presentations and other PC tasks. It allows real- time collaboration and sends large files over the Internet at lightning speed.

The cornerstone of NBOR is "Blackspace," software for word processing, desktop publishing, slideshow presentation, graphics, drawing, animations, audio, photo cropping, instant messaging and real-time conferencing.

Opening Blackspace results in a blank canvas on which users arrange text or create sophisticated visual displays with only a few clicks and drags of a mouse - without ever using the pull- down menus, icons, margins, tabs and fonts of Microsoft Word and other current word-process ing systems.

Canvases can be saved as common document titles - such as schoolreport.doc - or as a symbol, such as a ... Read more

A:Hmmm...Anyone Hear of NBOR Software?

7 more replies
Answer Match 43.26%

hey people, my brother was on the computer earlier today, and, the power went out (ouch!) We do not have a surge avaider, so, it porbably sort of short-circuited the computer. But, when the computer turned back on, he logged on and there was no toolbar. (Just a white line on the bottem of the screen.) So, I right-clicked that to get my toolbar back, but in the original Windows Classic Theme. So, I right-clicked my background and went into properties and I looked at the themes, and, Windows Classic was the only one, but, I could change that color. So, I switched out to like upload (or something) the Windows XP Theme to there, but, in the sample box, it turned completely black. Also, the internet stopped working. My sister's laptop (which I'm on right now) works fine on the internet. I am pretty sure Xbox Live (wired) works. So, it's all on the computer. I looked at the network connections and somehow they all got deleted. So, I tried to run the network setup wizard to connect to our old network, and, the network setup doesn't run. I double-click it and nothing comes up. So, now I'm stuck with a internet-deprived, windows classic themed computer. Also, it cannot drag icons or copy and paste them on my desktop. (Weird...)

A:Solved: Hmmm...Something weird happened

11 more replies
Answer Match 43.26%

Windows XP Media Center EditionI update and scan regularly with the line of AVG applications (AVG Anti-Virus Free, AVG Anti-Spyware 7.5, and AVG Anti-Rootkit). While scanning with Anti-Virus, it detected a "Trojan Downloader." I quickly removed it successfully. I then proceeded to scan with AVG Anti-Rookit and found a "Hidden Driver File" (under the name of "ahrmpxlv.SYS"). Located in WINDOWS\System3\Drivers\file. I followed to instructions to remove it which led to a restart on my computer. However, when I loaded up Windows, at the welcome screen, the into tune played but the screen didn't change to my desktop. I figured it took a bit longer because of the rootkit removal. However it stayed idle. Only if you hit CTRL-ALT-DELETE does it go to the desktop. A popup says that the rootkit was removed successfully. When I scanned again it was back but a different file name. I've scanned during safe mode and with system restore off. It just wont go away.Also, when i scan with Anti-Virus it detects a file named"host," which is located in WINDOWS\System32\Drivers\etc\hosts.Anyway, here is my HiJack This log:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 12:42:46 PM, on 10/13/2007Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.20661)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDO... Read more

A:Hidden Driver Problem Hmmm

No help?

2 more replies
Answer Match 42.84%

Purchased a used DELL laptop. On my old laptop I just clicked the IE icon and off I went at the library, hotel lobbies, starbucks,etc. I cannot connect this there a tutorial on the web, or some pointers? This laptop was used by a business person, and has internal wireless, just cannot

A:Solved: Setting up a wireless laptop..hmmm

16 more replies
Answer Match 42.84%

Recently sometimes while playing a game for a long time (few hours) my computer will turn off. I'll turn it back on and if i immediately try to play the game again then it will turn off not long after (after the game has been started). I have to leave my computer off for a bit and then come back and the problem will go away for a bit. Most of the time I'll see some signs before it shuts down, the game will become laggy and things take longer to load. Other times depending on the game it will freeze quickly and then turn off.

I googled this problem and I don't think it's my temperature. I have an antec gaming case that has excellent airflow. I opened up PC wizard 2008 to look up my rail voltages and it came up with some funky readings. I don't know much about rail voltages, but I know enough about computers to know 6.02v on a 12v rail is a littttle weird.

These were my readings off pc wizard

Voltage CPU: 1.20v
+3.3v voltage: 6.02v
+5v voltage: 3.58v
+12v voltage: 6.02v

I have a 600w ultra V series powering a

Intel Core 2 Duo E650
EVGA 8800gts 320mb "superclocked"
2GB DDR800 Corsair
FATAL1TY FP-IN9 SLI motherboard
120gb WD hard drive

everything in this rig is brand new (<1 month) except for my HD and my CD-drive. Everything is at stock speeds.

Any help or input on this matter is greatly appreciated. Thanks.

edit: the voltages appear normal in the BIOS but not under PC wizard in windows. Is this normal?

A:Hmmm...funky power supply voltages?

10 more replies
Answer Match 42.42%


This is the problem I'm having

I need more ports

My current group of friends have made me the LAN party host

Which is fine

Untill now

With more and more people coming every week and less and less of them being wireless laptops, I've encountered a new problem.

I don't have enough ports,

Right now I'm using a Linksys WRT54GS
4 Ports and Wireless G

but now im trying to get more ports

i was thinking of buying an 8 port hub, but i dont want to lose my wireless capabilites, i need them for my wii, psp, ds and upstairs computer, So is there some other option?

or can i use a hub and router at the same time?

And finally what kinda money am i looking at spending?
~Big Matt
<Grammar Gestapo>

A:Solved: Hmmm(Cliffhanger Title to Draw your attention)

8 more replies
Answer Match 41.58%

Whats Up All Of Tech Support and Affiliated Users...

I Got A Story For Everyone That May Help You In The Future and/or WILL Prevent You For Doing Stupid Stuff Like I Did LOL ... Anywho Here We Go ..

I Thought I Was Slick and Attempted To Install The "iPC MACOSX86" On My Windows 7 PC.. Well Im An Idiot For Even Attempting This..

The SECOND I Inserted The Disk It Gave Me The

"Non-system disk or disk error, Replace and strike any key when ready"

Well I Took Out The Disk ... Figured Everything Was Hunky Dory ... My Computer Restarted in the middle of the night to install updates.

and When I Woke Up.. I Got

" BOOT Mgr is Missing Press CTRL -ALT -DELETE"

I Try and Boot From The Windows 7 Disk .. No Luck

Long Story Short, I Thought It Was My HDD It Wasn't, Changed My Bios Order - NOTHING .. My Disk Drive Wouldn't Boot ANYTHING.. No Windows 7 Disks, No DVD, No CD... NOT A THING!!!!!

(So I'm Under The Assumption That This HDD Had It)

So What I Did Was, Took My HDD Attached It To ANOTHER Computer, Wiped My Hard Disk CLEAN (WipeDrive), and SUCCESSFULLY Re-installed Windows 7 With No Problems ...

Then, When I Put My HDD BACK Into My Original Computer The SAME Damn Thing Happened...

"BOOT Mgr is Missing Press CTRL -ALT -DELETE"

I Was Stumped For A Few Hours On What To Do ... So It Finally Dawned On Me .. Let Me Take The DVD Drive From My Second Computer Put It In My Original and See What Happen... Read more

A:DVD Drive (DH16A1L) Trashed Definitley or Indefinitley? Hmmm... YOU Make The Call

Is this a Windows 7 upgrade from Vista or XP?

2 more replies
Answer Match 38.22%

Now and then when I close internet explorer it comes up with "Internet explorer has stopped working" if I leave it then it will open Internet Explorer again, and if I click cancel, then then a message appears saying "Internet Explorer is Restarting", then I hit cancel again and I get an error saying "Runtime Error 217 at 03F1F48E"
Any ideas why this is happening?

A:Random "Internet Explorer Has stopped working" hmmm


1 more replies
Answer Match 38.22%

Hi All.
I hope somebody has a cheap solution for me. I have a Canon Pixma MP530 printer - excellent machine. But it has no network support or slot for a card. Now it has to move 10meters away from the PC, so the USB connection is beyond limits.
Is there a way I can get around this without spending a lot of money?
Any suggestions much appreciated.

A:USB won't reach

A USB repeater should work for you if you can run a physical line to the printer. It looks and works as shown on the following page,

2 more replies
Answer Match 38.22%


I am an avid WoW player, But I am having problems even getting 20 fps in raids. I ually get 50-60 anywhere else, but where it matters. I think if I give you info about my Laptop, maybe someone can help me out.

ASUSTek Computer Incorporation
Model: ASUS notebook G50VT Series
Processor: Intel(R) Core(TM) Duo CPU P7450 @2.13 GHz 2.13 GHz
Memory: 4.00 GB
System Type: 64-bit Operating System.

My video card is NVIDIA GeForce 9800M GS

I think if someone can help me change the settings of my video card, or maybe get a better one, more memory ,etc. Then any help is appreciated.


A:Trying to Reach 60 FPS

have you tried to upgrade your video card driver

3 more replies
Answer Match 37.8%

I'm having trouble very similar to the guy who started this thread:

I would just follow the advice given in that one, except I saw that some of the advice was based upon the specifics of his problem. So I think maybe I should post some of the same info he did and see what everyone has to say. In the next couple of posts I will put the information he was asked to post.

In addition to not being able to connect to, I'm having some other problems as well. I have gone for quite some time without updating my virus definitions, because it just wouldn't work. Recently I found a way to get new virus definitions (in Norton AV) via a server at my college. Once I did and ran an scan, Norton found 1133 instances of viruses on my machine. As soon as I saw some of the names that came up, I headed for to download any fixes they might have had. That's when I noticed the connection problem. Additionally, if I leave my computer sitting for a while (30 minutes or so) when I come back nothing works. I have what appears to be a normal desktop sitting there, but when I click the start menu I discover it's [empty]. None of my quicklaunch buttons work either. I suspect this might be the effects of a different virus than the one that's blocking me from connecting to So the gist is: I'm going to need help in the process of cleaning all these buggers of my computer, so this thr... Read more

A:can't reach

6 more replies
Answer Match 37.8%

I have a Compaq iPaq wireless router. My desktop computer is connected to port 1 and my laptop uses a wireless nic. The router is connected to a cable modem connecting to the Optimum Online service. Until a few days ago everything worked well. Now, neither box can reach the Internet. I have rebooted all devices, refreshed all IP addresses, all to no avail. The desktop machine can connect to the 'Net directly through the cable modem and the laptop can connect through my office wireless network. The only conclusion I can reach is that the wireless router has problems. The LED for WAN is lit as well as the Internet LED and port 1 LED.

George B.

A:Cannot Reach the Internet

6 more replies
Answer Match 37.8%

For the last 4 or 5 days I've not been able to connect to several sites including:, windows update (and several other MS related sites,) and connections to a number of sites have slowed to a crawl.

This is occurring on two computers
1. XP Pro SP2
2. 2k Pro SP4

I have a third computer running 2000 Server with no problems connecting to any site.

The XP SP2 upgrade was over a month ago and I've had no problems related to that other than my computer slowing down a bit.

What really throws me is this occurring on two different computers using different O/S's. I've checked the IE security settings tab and the advanced tab on all three machines (they are all set to default)

Note: I've been running MS Antispyware on these two machines for several weeks with no problems. I also run Spybot on the 2k machine.

I would appreciate any suggestions.

A:IE cannot reach several sites

16 more replies
Answer Match 37.8%

Since yesterday, I have been unable to reach IMDb using either Firefox or IE 7. I am also unable to reach Bleeping Computer. I am able to reach IMDb via their numeric IP address and am also able to go to the site using its DNS on my cell phone's browser. Bleeping Computer cannot be reached from either the computer or phone.

I checked my Hosts file and neither site is listed there.

My ISP is XO/Concentric dialup.

Thank you.

A:Cannot reach IMDb

Have you tried them today? Both are working....

For the record, last night I could not reach Google for almost 10 minutes....

3 more replies
Answer Match 37.8%

Hello friends at TSG,

I can't reach the website:

My browsers just time out ( IE8 & Firefox 3.6.8 ). The only way I have found to fix this problem is to use custom network settings with Selective Ack disabled. I recently did a clean install of Win XP and left the default network settings, which I thought would remedy the problem. There is no blocking in place that I'm aware of (browser, firewall, etc.) Tracert is successful. Any ideas would be appreciated.

I have:
Win XP SP3
Comodo 4.1.15
Avast 5.0.594
Linksys WCG200-CC gateway provided by Comcast

A:Can't Reach Website

13 more replies
Answer Match 37.8%

I made LAN of my PC and laptop using 1 additional Network adapter in my PC and connecting them both with CAT5 Cross-over cable. I manually stated IP's in Network TCP/IP connection configuration, respectively for my PC and for my laptop.
Problem begins here - i can ping from PC to laptop and receive response, connect to it and see shared folders/printers. But when i try to ping from laptop to PC, all i get is - Request timed out. Any other connections is impossible from laptop to PC impossible also. Although in Connection Status window, i can see how my PC receive pinging's packets. Both computers firewalls are off.

P.S. - cant explain this but - when i change ends of cable between computers, my laptops "ping -t" for PC, gets responded 4 times and continues getting timing out after.

A:One computer can't reach other in LAN

when i change ends of cable between computers, my laptops "ping -t" for PC, gets responded 4 times and continues getting timing out after.Click to expand...

I applaud your trouble shooting. Most people never think of switching the cable like that.

The result makes the cable a top suspect.

3 more replies
Answer Match 37.8%

As of last week I can't access a site anymore. The site in question is I'm in frequent contact with the admin and I'm assured that I'm on no firewall list or anything of the likes. I'm using wireless on my laptop. My desktop computer which is upstairs uses the same internet but it's connected to the modem, it can load the site as usual, yet I get this error when I try to load it from this laptop: Error 118 (net::ERR_CONNECTION_TIMED_OUT). When I ping the website I get 100% loss from the packets sent along with "general failure". I've tried different browsers, checked my firewall, turned off antivirus etc but still can't go on to the site like I used to. I called a friend up who has the same ISP as me and he can load it just fine too. I can still view the website using proxies but I could face problems if I log onto my moderator account using it. I really need some help please.
I have:
Win 7 64 bit
Windows firewall
ESET NOD32 4.0.474.0
Netgear wireless G

A:Why can't I reach a certain website?

12 more replies
Answer Match 37.8%

When installing software for new external Maxtor drive, I suddenly could access neither the MAXTOR NOR my C:. Running Dell, XP, Intel P4. How to reactivate C: drive???? Thanks PS Have tried "New Hardware" plug and play options....says: "drive installed"???.

A:Can not reach C: drive

go to control panel>admin tools>computer management>disk management and put a partition on it.

you will then be able to access your external drive.


1 more replies
Answer Match 37.8%

Howdy! For quite awhile now, I haven't been able to reach any sourceforge pages - and there are many. There doesn't appear to be a problem at their site, at least nothing shows up through a search - Googling only turns up user problems with settings etc.. My WinME, while hateful and all the rest, has never shown a problem accessing a website - just any sourceforge product page. It's the same story with our other WinXP PC as well. What a mystery! Firefox is my browser, I modified settings to "Autodetect proxy settings" after a forum recommendation, but no joy. If this is a firewall issue, it's odd that this is the only group of sites that I can't reach. Any suggestions for browser settings or info about sourceforge?

More replies
Answer Match 37.8%

I have a PC that was working fine 3 weeks ago and havent used it since. I turned it on the other day to use it. It booted up, got to the 4 blue boxes for windows and expected to load my desktop but it didnt. I tried using gparted live and then install windows 8 again, saw the 4 blue boxes again and loaded devices and then no desktop again. What could be causing this?

I tried using 2 different HD's. 2 different dvd players, 1 integrated video card and 1 I installed. I have tried windows 8 and 8.1 but cant seem to get to my desktop. Can someone plz help.


A:Can't reach desktop

16 more replies
Answer Match 37.8%

I used to have as my home page. I can no longer get to it or to lycos or alta vista. I was told to edit the host file in spybot search and destroy. I could not so I dumped spybot altogether. ihave edited it from the other hosts files which i found but still cannot get to these sites. Any suggestions? thanx. charlie

More replies
Answer Match 37.8%

Hi folks, I was a dumbass and got "Internet Antivirus Pro" . I folowed your guide and on a friends pc I got a remover for "Secure Antivirus Pro" It seemed to do the trick and I got rid of the malware but now I can get to any site except this one. I was on internet explorer and firefox. I finally just downloaded google chrome and I was able to use bleepingcomp.
Have I still got some bug in there somewhere? After I used the virus remove tool I bought AVG 8.5 Internet Security Pack and loaded it up. Anyone got any ideas

A:Cant reach bleepingcomputer

Let's see if there are any remnants left over messing with your HOSTS file or other settings.Some types of malware will disable MBAM and other security tools. If MBAM will not install, try renaming it.Before saving any of your security programs, rename them first. For example, before you save Malwarebytes', rename it to something like MBblah.exe and then click on Save and save it to your desktop. Same thing after you install it. Before running it, rename the main executable file first

Right-click on the mbam-setup.exe file and change the .exe extension to .bat, .com, .pif, or .scr and then double-click on it to run.

If after installation, MBAM will not run, open the Malwarebytes' Anti-Malware folder in Program Files, right-click on mbam.exe and change the .exe as noted above. Then double-click on it to run..Another work around is by not using the mouse to install it, Just use the arrow keys, tab, and enter keys. ~ Courtesy of boopmePlease download Malwarebytes Anti-Malware and save it to your desktop.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan. If an... Read more

8 more replies
Answer Match 37.8%

Hello. Recently, my Windows 8 has been working fine, but when I woke up this morning, I was not able to access the Internet. It has been int he same spot for the last few days and Internet was perfect, but this morning, it would not connect to any. Basically, it won't even list any. I know I'm not too far away and I'm sure it's still working because:

1) My father and sister are using it.

2) I've gone to two different houses with different internet, nothing changed.
I've been trying to fix it since 7 this morning and I feel like I'm going to just burst into tears of frustration. My audio is also not working, but I care more of getting the Internet working. And my computer will not allow me to turn on Windows Security Center.
I hope someone can fix this, and if they do, I will be seriously grateful. Thanks much, sincerely, Heather.

A:Cannot Reach Networks

Well it would help to know if you have looked to see if the unit is in Airplane Mode, or the wireless is turned off. The other is what is the manufacturer & exact model number of the device? Also is this a Tablet, laptop, Ultrabook, or Desktop.

4 more replies
Answer Match 37.8%

For some reason, I am unable to reach Ann Coulter - Official Home Page on my computer. It's been several weeks since I was last able to visit the site. The problem happens in every browser I have, including recent or current versions of Firefox, IE, Opera and Chrome. I can reach any other website I try to get to just fine. I never used to have any trouble reaching that website until about a month ago. No one else uses this computer and I live alone.

It appears that I've blocked that one site but I'm darned if I can figure out how.

Here's what I've tried so far:
1. Run Avast Free Antivirus with the latest version of the program and definitions. Results: no threats found with either the quick scan or the full scan.
2 Run Malware Bytes with the latest definitions. Results: Results: two threats found and removed but I still can't reach the Coulter website.
3. Checked my Hosts file. Results: nothing there is blocking any website.
4. Checked my router settings. Can't see any blocks there.
5. Had other people try to access the site; they were successful.
6. Googled and found one other forum where someone was having the same problem with respect to the Coulter website. But his problem apparently went away two weeks ago. He didn't indicate if he had done anything to make it go away.
7. Checked the Windows Event logs but can't see anything there reflecting my problem.

Can anyone suggest anything else I can check?

I can live without this website working but it's bugging me tha... Read more

A:Can't reach one site

Since it's happening in all browsers, my guess is it's blocked in your modem/router. Any liberals been around? lol

15 more replies
Answer Match 37.8%

I got a very serious problem. My laptop's CPU is reaching 100% most of the time, for no reason. I scanned the machine with Norton, but nothing. I installed and run SuperAntiSpyware but found nothing. I tried Hijack this, but for some reason is not giving me any results when I try to analyze the log.

Could you please try and help? The situation is impossible...

Dell 620
Internet Explorer
Norton AV corporate

This is my log:
Logfile of HijackThis v1.99.1
Scan saved at 14:38:37, on 25/10/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Running processes:
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Wave Systems Corp\Common\DataServer.exe
C:\Program Files\Symantec AntiVirus\DefWatch.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Symantec AntiVirus\SavRoam.exe
C:\Progra... Read more

More replies
Answer Match 37.8%

I have been trying to clean up this mess for a couple of days now, agh!

Got a bunch of the anti-spyware/adware things, Hijack This, etc...

Happy to post a log file if needed, how do I get the browser to stop redirecting the URL? Is this some sort of DNS change?

Any help is appreciated, and of course, thank the Godz for sites like this one where fellowship and assistance can be found!

A:Can't reach Google

Please don't post dupliates. Reply here:

This thread is now closed.

1 more replies
Answer Match 37.8%

I am using IE 5 on a Windows 98. I cannot reach certain sites:

I always get page not found, and it points me to IP address of every time. I wanted to upgrade my IE to
128 ciper, but cannot access the site.

Any help?

A:Ie 5 - Cannot Reach Key Web Sites

16 more replies
Answer Match 37.38%

When I bootup I get the following blue screen massage

Cannot determine file system of drive \??\volume{46ff3593-6819-11d8-a1e3-00e02944fb8a}

It doesn't seem to have affected any applications but ??
My OS=WinXP sp2
I have dual HD. One is 25G c-drive
the other is 200G partitioned as 60G/ 60G/ 80G, all NTFS file system.

This just started and I'm not aware of any one thing which might have triggered it.
I have undated a couple of drivers over the weekend and reloaded
Roxio Media Creator 7.5 onto a larger partition. I first uninstalled through
add/remove programs from c-drive and reloaded onto a larger partition.
I didn't get this screen till several reboots and a day later.

More replies
Answer Match 37.38%

I have used Spam Interceptor for about 6 months, and consider it an exceptionally effective spam-blocker. However, when I have tried to reach my account today, I have received this error-message:

'Could not locate remote server'

Why should this be happening ?

A:Unable to reach SpamInterceptor

The crisis has passed. I dare say that the more knowledgeable of you think some of these gadgets unnecessary, but after some vigorous tidying-up with System Mechanic, the difficulty disappeared.

1 more replies
Answer Match 37.38%

So recently my external harddrive was dropped and died. I had Steam installed on it, but since it's dead, I wanted to reinstall in onto my normal drive. Well, when I went to try, it gave me an error because it couldn't find it in H drive. And I can't uninstall it, because the add and remove programs wizard gives me an error because it can't locate it. What do I do?

A:Solved: Uninstalling from something I can't reach.

Sounds like you have no option except to manually delete any folders/files associated with the program from your C:\ drive (there shouldn't be much if the prog was installed on the external drive) and edit the registry. Tricky business if you are not experienced with such things.

If you should be tempteted to do so, be very sure to do a backup of your registry before doing anything. You can learn about backing up the registry here.

Good Luck... Raybro

2 more replies
Answer Match 37.38%

Power on,screen black . Cant get any response to f keys. Problem happened after system restore completed. then got blue screens of oxc000021a and WDF. Changed monitors, video cards and hard drive,  No access to the boot menus. Have recovery software but cant run it. Also checked power supply voltages-all are correct.

More replies
Answer Match 37.38%

Hey guys, I have a bad case of the Blue screen of death. At first I was only receiving the registry error(0x00000051) when I attempted to boot safe mode. I eventually fixed that using a program called safekeyrepair or something like that. But now I get the bsod when trying to enter safe mode or normal windows.

So I decided screw it I'll try to use the directory recovery mode and just repair or reinstall. But that mode produces the same bsod. So then I tried using my windows xp cd from another computer and when that loads it says it can't find a hard drive, which is bs because I've run a hdd diagnostics program and it spent an hour scanning a hard drive I'm sure of it. The error I received from the diagnostics scan was Error code 0000: Read verification failed.

That's about all I can think of, can anyone help?! Thanks for looking!

A:BSOD can't reach windows at all!

8 more replies
Answer Match 37.38%

I am using Windows 2000, and I have a number of ham radio programs that use the sound to demodulate digital data (e.g., RTTY). These worked perfectly for years, but then I was unwise and tried out additional programs, that I did not keep track of. I suddenly discovered that my old programs (MMTTY, Logger) no longer receive sound. The sound comes through the speakers, and the Windows mixer works to vary the intensity and mute the different channels, but the software does not see the sounds, and the software displays show no sound. This is true for all the programs that I used to use.

I expect that there is a key dll or other file that was changed, but I cannot determine which one.

I have looked at the running processes, and I think that I can account for every one, and these do not affect sound.

I would appreciate guidance in tracking down the problem.


A:Sound does not reach software

7 more replies
Answer Match 37.38%

ok I'm a bit paranoid now, and i'm using my brother pc to post this. I started my laptop and everything was fine but after the windows loading screen, it suddenly restarted then something showed "windows didn't shut down correctly please select from a list: start windows normally, and there are 3 other options i forgot." SO i choose "start windows normally" then it showed the windows loading screen again, then after that it restarted again and showed that "windows didn't shut down correctly" screen again! please help!!!!! I swear it's not my power.


A:Unable to reach desktop!! please help!!

Let's not panic yet!

Try again, this time select Safe Mode instead of Start windows normally. Come back to tell if you could boot your laptop to Safe Mode.


6 more replies
Answer Match 37.38%

Guys, I have a small problem...I have a netopia 3d reach, but no driver!! all I can find is these driver scans that tell me I have no driver!! I jsut want to find a site that will allow me to install a free driver for my wireless adapter!! plese help!!

More replies
Answer Match 37.38%

There is a forum that I moderate at http://s12.************.com/TedworthPC/index.php. (The asterisks of course represent the string indicated by me more fully in the title.)

I have visited the forum a number of times every day since it was launched some months ago.

However, when I try to reach it today, I am unable to do so, and instead a capital 'H' appears in the pane where the forum ought to appear.

This notebook is swept for viruses and spyware every day, and appears to be clean.

Can anyone help ?

More replies
Answer Match 37.38%

My Prescott 2.8E is currently overclocked to 3.4ghz with a FSB of 243. The CPU voltage on the Abit IS7 is 1.6625 V. The DDR voltage is 2.6V on my 2x512mb PC3200 setup. (1x512mb is a no-name Legacy brand and the other 1x512mb is a Mushkin value brand).

Through the BIOS, the 2x512mb DDR400 is running at 2.5-3-3-7 with a 5:4 ratio speed of 194.7mhz (194.7mhz x 2 = 389.4mhz effective).

I've tried to reach a stable 3.5ghz (FSB=250mhz) but running 3Dmark05 causes WinXP to BSOD. I've tried increasing the CPU voltage to 1.7125 V but it's doesn't help. I've tried loosening the memory timings to 3-3-3-8 but oddly, this caused a failure of WinXP to load (whereas booting the system with 2.5-3-3-7 at least got me to a stable Desktop).

What do you think is holding me back? BTW, the CPU is being watercooled by the Koolance CPU-200G and with AC in my room, the temp is around 46 to 47 C.

Will buying the Geil Ultra PC4000 DDR500 ram help me to reach a stable 3.5ghz or have I already reached the limit of my CPU overclock? I don't want to invest around $150 on the Geil PC4000 and find out that I still can't overclock to 3.5ghz.

All help/advice/feedback is greatly appreciated!

A:2.8E can't reach 3.5ghz. PC4000 RAM the way to go?

14 more replies
Answer Match 37.38%

Here's the latest on this from CNet.

A:Conficker wants to reach into your pocket

How do all these companies know about this? How do they know what it does already before it gets released? Who or what is releasing this?

2 more replies
Answer Match 37.38%

Hello. Here's my problem:

I got home from work one day and my wife tells me the computer "just stop working". Confused I ask her how? Unable to tell me, I decided to turn on the computer. Unfortunately, nothing happened. Since I believed the prob was the power supply, as the fan was not turning, I bought a new one and tried again. Still nothing happened. So I decided to try a new motherboard, Biostar M7VIG 400. Still no luck. So I tried a new CPU, AMD Athlon XP 2400+. Now the PC has power, the keyboard lights up, the DVD and DVD-r drives respond, and the CPU fan runs but it does not continue to POST. Everything stops there, the fan continues to run, an amber light on the case stays lit but nothing happens. I've tried disconnecting everything, hard drive (which is empty but that's another story), DV, DVD-r but no luck. And this is where I ask for your help. Anyone have any suggestions? Thanks!

A:Unable to reach POST

16 more replies
Answer Match 37.38%

Hi all, I got weird problem. One day both of my browser (IE7 and Firefox 2.011) can't reach internet. I am using winXP. Other computer connected to the same router works just fine.

I can't even go to my router login page with that computer (IE said address not valid while firefox displays some error that I don't understand). I can ping the router, I can ping other computer in network, I can share files to/from other computer, my network can see this computer and this computer can see other network just fine. I even can ping www[dot]yahoo[dot]com (sorry I am not allowed to post links yet, my first post) which proves nothing is really wrong and that it should see internet just fine. Try to change port in the router but same thing happen. Internet just crawl and sometime does not work at all.

I have run anti spyware and anti rootkit both say negative. I also run antivirus and it seems OK. Antivirus update seems run just fine. It just weird that it happen to both browser at the same time.

Any idea? Thanks in advance!

A:Browser can not reach internet

Solved, sorry all, I tried HideIP platinum and when I uninstalled, it leave proxy address on both firefox and IE.

5 more replies
Answer Match 37.38%

Hi Everyone,

I am trying to setup a Print Server remotely - and the challenge that I am facing is that the Print Server is on a different sub-net (by default) than the main network.

The main network consists of the I.P. addresses: to

The Print Server has a default I.P. address of:

Fortunately the remote location is using a Netgear SRXN3205 which supports Lan Multi-Homing.

I have added the address to the router (as shown below) -

I have remote access to a Windows 7 computer, and I have tried adding a Static Route to it in order to reach the Print Server -

I have tried both of the following -

route add mask

(above uses the Routers LAN Multi-Homing feature)

route add mask

(above uses the Routers standard I.P. address)

** Can't reach the print server either through ping or a web browser with either of the above commands ***

If anybody has any suggestions on how I can reach the config page of the Print Server (TP-Link TL-PS110U) they will be greatly appreciated.

Kind Regards,


A:Trying to reach print server on different sub-net

7 more replies
Answer Match 37.38%

I am running IE8, Windows XP Professional Firewall, PC Tools AntiVirus and can reach only ( https) sites, no (http) sites. I have not changed any Internet Options.

I haven't got a clue as to why.

A:Can reach only Secure sites

Open Command Prompt and ping your IP address. Let's see what happens.

5 more replies
Answer Match 37.38%

My laptop is brand new ( bought in February 2016) already went for repairs with your HP department twice and does not work ... Called the HP 800 number and they are not calling me back and putting me on hold from departments to departments for over an hour twice ...And that's just this 3rd time I"m asking for help . I bought this laptop for my husband for his travel in June to be able to skype with the kids and we have not been able to use it ... I cannot take any more calls to across the globe to a customer service that is avoiding the solution . Please help me reach US coorporate . Our case number ends in 6723 ...Please help me ! 

More replies
Answer Match 37.38%

Hi, I hope I have posted this in the right forum, apologies if I haven't. Here is the problem I'm having.

I bought a HP ENVY 17t just over a month ago. For the first week, 10 days, everything was fine, I have a good internet connection with TWC and the wireless modem/router I got was perfect.

Then I started to notice that I could not access some of my usual websites. I would type in the URL press enter then wait, and wait..... as opposed to just a day or so previously when I reached tte site instantly. Some of the sites would eventually, after a minute or so, some longer, appear, but then not completely, the graphics (pictures) were missing, links on the side of the pages were not there.

Initially I had thought that it was a problem with my internet connection so I called TWC. They checked at their end and then checked the modem/router, and pronounced that there was no problem with the internet connection. And sure enough, when I tried to download files from the office, I had no problems at all. I could access the servers and download large files without a problem, as fast as I did before the problem started.

I then called TP-Link. My Modem router is a TP-Link Archer CR700. I thought that there might be some kind of intermittent problem. They too checked everything with the modem, had me run some tests, and while the modem worked perfectly, I still could not access an ever increasing number of websites.

The sites I cann... Read more

A:Cannot reach/access websites


I had the same problem and I tried that and it was successful :

1) press "windows key" + "x"
2) click on XXX (admin) (I have a french version of Windows)
3) write : netsh int ip reset and press ENTER (an error can occure)
4) write : netsh winsock reset and press ENTER
5) restart your computer (The problem should be fixed)

I also updated my network drivers (hardware).

I hope that it works for you.

Have a nice weekend.

0 more replies
Answer Match 37.38%

I got a little one problem with my router. I know IP its but when I write it down to browser, nothing happens. Can you tell me what am I doing wrong, or where trouble can be hidden?
And its vigor 2700 gtsv.
Thanks for upcoming answers

A:Cant reach my router settings

13 more replies
Answer Match 37.38%

My Disk Usage and CPU columns of the task manager randomly jump up to 99% or even sometimes 100% which is unresponsive. This seems to happen more often when I run programs such as a malware scanner or League of Legends. My FPS in League stays around 1 when I do try to play and I'm assuming this is a related issue. I'm currently reading through other threads with similar issues but I thought I'd post my own for better results. Would it help if I included a screen shot of the task manager window?

A:Disk Usage and CPU Reach 99%

Welcome to eightforums "sheep".It wouldnt hurt uploading a screenshot and also fill in your system's specs for later references.Meanwhile try to disable indexing and windows search,see if that helps.

1 more replies