Tech Problem Aggregator

Wondering if this will work in my Dell Optiplex GX 280 tower-style PC

Q: Wondering if this will work in my Dell Optiplex GX 280 tower-style PC

Nvidia P356 Quadro FX4600 graphics card - 768MB GDDR3 PCI-Express x16 dual DVI out thank you all

A: Wondering if this will work in my Dell Optiplex GX 280 tower-style PC

As long as you have a PCI express socket on the motherboard, that card will work. You may need a power cable adapter to be able to connect the card to the power supply

1 more replies
Answer Match 92.82%

Hi, I might be able to buy a second hand Optiplex mini tower and I would like to install the motherboard etc. of my Optiplex 755 SFF.

Wilt thi fit?

The idea is that with the Mini Tower I can buy a better GPU.

thanx.

A:Does motherboard of Optiplex 755 SFF fit in a Dell optiplex 745 dualcore mini tower?

No it wont fit.   The board layout, number of slots etc is different.

2 more replies
Answer Match 86.1%

I purchased the dell 990 and 7010 motherboards I'm using for builds. Each motherboard has two PCIe X16 slots and I'm hoping I can set these up with 2 graphic cards in crossfire in either motherboard. I will be using a 600 watt PSU for each of them and I have 2 Sapphire R7 260X cards I'd like to use in crossfire in one of them. Is that possible? Are these motherboards crossfire and/or sli compatible?
 

A:I Purchased 2 Dell Tower Motherboards. The 990 And 7010. Was Wondering If

I am a bit confused. And sadly, you did not give us complete information to go on. Most people don't buy motherboards from Dell, except for repairs under warranty. Did you mean you bought two Dell tower computers? If so, specifically which ones? And what is the brand and model of the PSU, and the Sapphire cards. Note there are 6 different models of the R7 260X.

Note that CrossfireX is used with AMD cards (which your Sapphire's are). SLI is used with NVIDIA cards. Same difference - the idea is the same, to strap two cards together for better performance. And yes, depending on the specific Dells you bought you should be able to use both cards. But I note there is a SFF (small form factor) 990 in a slim case. That may cause problems. If this is the 990, then you should be okay for space. But adequate cooling may be a problem. It is the case's job to provide an adequate supply of cool air flowing through the case. Same issues with the 7010. There are several models within the 7010 line and space and cooling may be issues.

I also worry about your PSU. Sadly, many cut corners in the budget and fail to get a quality 80 PLUS certified power supply. It's like buying a new Porsche then filling it up with generic, possibly watered down fuel at the corner Tobacco and Bait shop. Not good. According to user manual (click Download then scroll down) for the R7 260 card (all models), it says 600W "minimum" supply with two 6-pin power connectors with 2 cards. If... Read more

7 more replies
Answer Match 84.42%

Hello experts,
I am really frustrated with my dell optiplex 745. I have been endeavoring to get on when I replaced the power supply but with no success. I have also changed the motherboard and again nothing to be happening. The dell powers up just fine and then the cooling fan goes noisy. There is a green light in the front panel show showing the numbers; 1, 3,  and 4.  I would be grateful if you can help me with this issue.

A:Dell optiplex 745 tower won't boot

Beep code


1-3-1 through 2-4-4
Memory not being properly identified or used


http://www.dell.com/support/home/us/en/19/product-support/product/optiplex-745/manuals
Power button Solid Amber is Bad CPU/Motherboard.
Power button blinking Amber is Bad Power supply.

1 more replies
Answer Match 83.16%

I Have Dell optiplex 745 With 3.4 Ghz Pentium D Processor with 4MB cache Memory .... Recently I wanted To Upgrade my p.c to dual core 2.6Ghz  E5300.. when i put Dual core processor into my board and truned on p.c the all lights was green and fan was running too fast and mY lcd Does Not dsplay anything .... And also My bios version is 2.6.3 .. what is the main fault in it.... kindly anyone tell me.... what should i do ???

A:Dell Optiplex 745 Mini Tower Upgrade

Hi Asfand_Munib,
Before installing a new processor, please update the BIOS to latest version from Here.
Note : Please save and close all running programs and documents and disconnect all external peripherals (printer, flash drives, external hard drives, etc) and connect the computer to a surge protector before updating the bios.
If all the lights are green and you are not receiving any beep codes from the system then it means that the processor has been installed correctly. Please check if the keyboard lights (Capslock, Numlock, etc) respond when you press the corresponding keys. Please verify the connections on rear of the system and check if they are connected firmly. Also, check if you are able to hear any windows jingle sounds after some time when you power on the system. Please share the exact model of Optiplex 745 you are using as it comes in 4 form factors viz Ultra Small Form Factor (USFF), Desktop (DT), Small Form Factor (SFF), and Mini-Tower (MT). A picture is attached below.

Please reply with the information. Will take it further from there.

14 more replies
Answer Match 83.16%

We currently have Dell Optiplex 7010 tower in our office. It's using a single Acer G6 G276HL monitor via DVI-I port on the video card. We were thinking to buy a second monitor and I want to know if it's going to work?
The video card inside this Dell is AMD Radeon HD 7470:https://www.amazon.com/radeon-profile-display-desktop-computer/dp/B00CR230G0
I was thinking to get the same screen:https://www.amazon.com/gp/product/B00G5AEZOQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1The issue is connecting it to the display port on the Radeon card. So I was thinking to get this adapter:https://www.amazon.com/HP-DisplayPort-DVI-D-Adapter-481409-002/dp/B00PHINWX2/ref=sr_1_2?ie=UTF8&qid=1470159981&sr=8-2&keywords=display+port+to+dvi-d

A:Trying to set up second screen for Dell Optiplex 7010 tower

I presume you're using a DVI-D cable since the current monitor doesn't support DVI-I which the video card supports.
Why not get a second monitor that supports DisplayPort and go directly from DP on the video card to DP on the second monitor without complicating things with that DP>DVI-D adapter?

3 more replies
Answer Match 82.32%

I intend to purchase optiplex 7040 MT for gaming purpose. So I would like to know:
1. Does the motherboard have standard CPU and motherboard power connectors or proprietary ones?
2.  Is it possible to replace the stock PSU with a cooler master extreme power plus 600W? If no, then what size /kind of PSU will fit there?
3. Is it possible to fit a gtx 1080 in there?

More replies
Answer Match 81.48%

Hi everyone:

I was curious if anyone else experienced this issue? I have a Dell OptiPlex 7010 desktop/mini tower that I bought off the official Dell site. I configured that mini tower to have an SSD drive as the main drive, which I like very much, except one very annoying issue. Sometimes out of the blue Windows 7 will hang up, I can't click anything and the mouse starts spinning in a circle. This continues on for about half a minute and then it always comes back to life. Suddenly I start getting all my previous clicks moving windows, opening things, etc, all at once. This happened at least a dozen of times by now and I started to notice that when this happens the HDD/SSD LED on the case glows solid, which made me suspect that there's something going on with the drive itself.

Does anyone know what's going on and how to fix this?

PS. I tried contacting Dell support about this issue but they are pretty useless. I spent several hours in a chat with a guy once that eventually simply hung up on me. Then I emailed someone at Dell, for which the guy replied with instructions to run their hard drive diagnostic tool, which I did, that did not show any errors. (Note that I don't have a hard drive, it's a solid state drive.) I replied to the guy only to never hear from him again.... So I think I'm pretty much done with the Dell support

A:Dell's Optiplex 7010 mini tower SSD hang-up issue

Hi,

Have you tried updated the firmware on the SSD?

9 more replies
Answer Match 81.48%

Hi,
i am using dell optiplex 780-Mini Tower. last week my pc didn't startup windows and stuck load on dell logo screen with flash light showing 1 - 4 and off LED light. also  didn't access/load boot menu, bios. i tried power on with all external devise unplugged but show same problem.
can you pls help me out. thanks in advance. 

A:dell optiplex 780-Mini Tower. flashing 1 and 4 with off power light

You ram is bad.  F2 Bios setup requires working ram.

1 more replies
Answer Match 81.48%

Hi TechSpot Forums!

I own a Dell Optiplex GX280 Mini-Tower PC, and am seriously considering buying a graphics card for it.

My question to you is, which would best be compatible with my specs?

System Specs:

Dell Inc. OptiPlex GX280
Windows XP Professional Service Pack 3
3.00 gigahertz Intel Pentium 4
2552 Megabytes Usable Installed Memory
500.10 GB HDD

Current Video Card:

Name: Intel(R) 82915G/GV/910GL Express Chipset Family
Manufacturer: Intel Corporation
DAC Type: Internal
Approx. Total Memory: 128.00 MB
Current Display Mode: 1400 x 1050 (32 bit) (60GHz)

Does installing a graphics card mean you can achieve higher resolutions on your LCD monitor? That is partly the reason I will be purchasing one.

Thanks for any info or suggestions,

~ TomHax
 

A:Graphics card for Dell Optiplex GX280 Mini-Tower?

Does installing a graphics card mean you can achieve higher resolutions on your LCD monitor?Click to expand...

That depends on the maximum resolution supported by your monitor.

What's your main reason to purchase the card? What's your budget?
 

7 more replies
Answer Match 81.48%

I'm considering buying a used Dell OptiPlex GX790 MT computer, and I'm wondering what the maximum video card length can be without having to remove the hard drive cage.

A:Used Dell OptiPlex GX790 Mini tower video card

The hard drive cage isn't the only problem.  The power supply is not standard.
So a short GTX750 TI non SC would be the max.
 

4 more replies
Answer Match 80.64%

I have an OptiPlex 990 Tower and want to install a Flex Bay Card Reader.  I have the following P/Ns:
0g7v21 Card Reader
0N95F Bracket
01YMGT Cable Assy
DS-8A8SH  DVD Writer
SATA cable
I need the cable assy number for the card reader to motherboard.  Any help is appreciated. Thanks, Bob

More replies
Answer Match 80.64%

I have a Dell OptiPlex GX280 mini-tower (smallest one thereis), and the original 160W power supply died a few months ago without warning. I ordered a new power supply, but accidentally ordered the wrong size (210W for one of the larger towers). I used it in the meantime until I could get the proper size (although the 210W supply wouldn’t fit in the mini case – I left it out of the case and ran the wires through the power plug hole). The computer booted up just fine with this 210W power supply. I finally got around to ordering the 160W smaller correct size, but that power supply would not boot up the computer (just got an amber flashing light). Thinking it was just faulty, I sent it back and requested a replacement. The replacement did not work either. I ordered a third replacement, and the third did not work either! So now I am back to using the 210W power supply (No. HP-U2106F3) which does not fit in the computer housing. I know these Dell OptiPlex machines are notorious for having power supply and capacitor issues. But the question is, why will the computer power on using the 210W power supply? I contacted Dell and they were of no help whatsoever. The guy told me that 160W wasn’t enough to power my machine and to order a 210W power supply correctly sized for my chassis. Gee, thanks! First of all, they don’t make 210W that fit in the mini towers, and second of all, why did it used to work just fine??? Oh, and no I have not upgraded anything (i.e., video card, etc.) which... Read more

A:Dell OptiPlex GX280 mini-tower power supply problem

16 more replies
Answer Match 80.64%

Dell Optiplex 3010 Mini Tower
intel core i3 3220 3.30 Ghz
4 GB RAM
265 watt PSU
24 pin connector
INTEL HD 2500 GRAPHICS

More replies
Answer Match 77.7%

I was planning on buying either a Dell Optiplex 780 SFF or an Dell Optiplex 980 SFF but I would like to know which one will work with Windows XP 64 Bit.

A:Will Windows XP 64 Bit work on a Dell Optiplex 780 SFF or Optiplex 980 SFF?

For Windows XP 64 Bit its best to use the somewhat hidden (old ftp website):
http://ftp.dell.com/Browse_For_Drivers/Desktops/Optiplex/OptiPlex%20780/
http://ftp.dell.com/Browse_For_Drivers/Desktops/Optiplex/OptiPlex%20790/
http://ftp.dell.com/Browse_For_Drivers/Desktops/Optiplex/OptiPlex%20980/
This has the old drivers listed of multiple versions including the XP x64 drivers not mentioned on Drivers and Downloads. The new ftp website is slightly broken at present.

6 more replies
Answer Match 74.34%

Ok so I just recently got a Dell optiplex GX 755 PC that has- 
*Intel core 2 quad processor 2.4 GHz
*8GB ram
*320GB hard drive (kinda small i know, i'm looking to upgrade that as well)
I'm posting this here to see if anyone knows mainly what graphics card i could get that would make my PC gaming friendly. It doesn't have to be the most amazing stellar quality card out there since iv had (some) people tell me that you cant upgrade these PCs much. But just some good quality advice on the subject and maybe a recommendation on what card brand to get as well as the specs for it. Also a recommendation for a video card would be greatly appreciated as well. Sorry for my ignorance on on the subject, i am new to the PC world. I ended up having to get this computer in a pinch because I am a small time graphics design artist and my laptop died, and I had orders coming in. I'm not looking for a quick fix to the problem so even if anyone has a solution that may take a bit or quite a few steps to get underway, the help is still greatly welcomed! I am hoping if its at all possible to make a good situation out of this and maybe build this PC to fit my needs. Thank you to anyone who can help!

More replies
Answer Match 74.34%

Ok so I just recently got a Dell optiplex GX 755 PC that has- 
*Intel core 2 quad processor 2.4 GHz
*8GB ram
*320GB hard drive (kinda small i know, i'm looking to upgrade that as well)
I'm posting this here to see if anyone knows mainly what graphics card i could get that would make my PC gaming friendly. It doesn't have to be the most amazing stellar quality card out there since iv had (some) people tell me that you cant upgrade these PCs much. But just some good quality advice on the subject and maybe a recommendation on what card brand to get as well as the specs for it. Also a recommendation for a video card would be greatly appreciated as well. Sorry for my ignorance on on the subject, i am new to the PC world. I ended up having to get this computer in a pinch because I am a small time graphics design artist and my laptop died, and I had orders coming in. I'm not looking for a quick fix to the problem so even if anyone has a solution that may take a bit or quite a few steps to get underway, the help is still greatly welcomed! I am hoping if its at all possible to make a good situation out of this and maybe build this PC to fit my needs. Thank you to anyone who can help :)

More replies
Answer Match 74.34%

i have a dell optiplex GX-280 tower style not the one that lays on its side and i want to put a new prosseser in it was looking into this style Pentium 4 Dual Cores there is a pentium 4 at 3.0GHZ right know but just tring to get a little more out of this old pc got a 512mb video card and 4gb ram and a 500gb harddrive with a bigfoot enternet card 1gb well if u can help i appriceat it thanks a lot
 

A:Wondering if this will work in my Dell

First you need to find out what socket the Cpu is, I think it's LGA775?.. I was just reading someone wanted to upgrade there Gx-280 CPU and read that they were stuck with it becuase there was no dual core processor available for it, but I just looked on newegg and they have a few dual core socket 775.. So im not sure, you just have to do a little homework. Hope this helps
 

7 more replies
Answer Match 69.72%

HI, I have a Nvidia Geforce 2 MX 100/200 and I cant get it to work in my Dell Optiplex 110 while using windows 2000 (not ME) I have windows XP and windows 2003 also, and I could get it to work with those operating systems. xp and 2003 find the card and installs it by itself, and 2000 finds it, but wont install it, so I went and got a driver from driverguide, and installed the driver, then it got me to restart my comp, and I did, so I unpluged the monitor from the onboard, and put into the Nvidia it didnt work. so I plugged back in to my onboard and went to the device manager, and It said the video card was working properly. Also, windows 2000 wouldnt let me turn off the onboard card... XP and 2003 allowed me. can anyone help?

Thanks
 

A:Cant get Geforce 2MX to work in my Dell Optiplex

9 more replies
Answer Match 69.3%

Hi. This 24pix MINI atx power connector is basically the same as normal ATX connector (bur smaller of course)? At the pin settings is different? Where I can buy 24pix ATX to 24 pin MINI atx adapter that will work with those boards? Thanks.

A:Dell OptiPlex 760 (GX760) SFF and Dell OptiPlex 780 (GX780) SFF mainboard power connector?

Moddiy makes this.
Dell 980 960 780 760 PSU 24-Pin to Mini 24-Pin Adapter Cable (10cm)http://www.moddiy.com/products/Dell-980-960-780-760-PSU-24%252dPin-to-Mini-24%252dPin-Adapter-Cable-%2810cm%29.html
 

1 more replies
Answer Match 68.88%

I've just installed a Nvdia FX5200 graphics card into my Dell Optiplex gx60 but can only get any display on the monitor when I start in VGA mode.

The monitor is Dell E173FP 17" (17" V.I.S.) Analogue Flat Panel Display.
The PC is a Dell Optiplexgx60 Celeron 2.4(R) 768MB

When I start the pc up normally with the monitor plugged into he card I get the startup screen but then it goes blank. I can plug the monitor into the PC's integrated vga plug and see the display fine on screen.

If I start the PC in VGA mode I can see the desktop but if I go to the control panel and change the screen resolution to a higher one it just goes blank.

Does anyone have any ideads? Thanks, Mark
 

More replies
Answer Match 68.88%

Hi Expert

My client has 5 desktops at his office all of them are Dell OptiPlex GX720 with XP Prof SP3.

One of them sound does not work,,,,,I tried many things, install driver and download new driver , check if the sound is disabled or enabled ,,,,etc.

Sound card is built in.

What I did from home I accessed the desktop that has sound issue (VPN and RDP) and when I un installed the sound driver and installed it again the sound worked I thought this is the end of my dilemma, I was so happy because the issue was solved and I called the client to tell him that everything is fine.

Next day there was a surprise for me my client rang me to tell me that sound does not work,,,,,,I have no idea what do ? Why it was working when I logged in remotely ?

What are other steps I ought to be considering for the troubleshooting ?

Thanks
 

A:Dell OptiPlex GX720 sound does not work

8 more replies
Answer Match 67.62%

I jave just installed windows 7 professional on my dell optiplex gx280 system and came to know that there is no driver available for the built in graphics card (Intel 82915G/GV/910GL Express Chipset Family) that can work with windows 7. Now I am thinking about buyiong a new graphics card. So, please tell me which one would be an optimal compromise between price and performance? I am not going to play heavy games or do any advanced video editing on my PC. I will be only running graphics editing software like adobe photoshop and illustrator and ofcourse, I want to get windows aero interface to work, too.

Or, is there any way to get my current graphics card work in windows seven???

Thanks in advance for giving any advice.

A:Minimum Graphics Card that will work with Dell Optiplex GX 280 + WIn7?

The 440GT and HD5670 are good choices

Newegg.com - SAPPHIRE 100287L Radeon HD 5670 (Redwood) 512MB 128-bit DDR5 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card w/ATI Eyefinity

Newegg.com - MSI N440GT-MD1GD3/LP GeForce GT 440 (Fermi) PCI Express 2.0 x16 HDCP Ready Video

8 more replies
Answer Match 65.94%

solved
 

A:Optiplex GX1 Tower

Jonathon,

You need to use Thread Tools in the ORIGINAL Post to flag you Q as solved. Creating an unrelated new Post is a compounded problem.
 

1 more replies
Answer Match 64.68%

I tried to add a PCIe 16x video card to this machine and plugged a monitor into the card as well as the on board VGA in an effort to setup dual monitors. When I booted after that, I was given an error message after POST that said that is in incompataible configuration. I checked with Dell and they said it was too. I've done this exact thing with a PCI card on an older Dell machine and it worked instantly. Are there any work arounds or BIOS settings that I can change? The add-on card is a Dell ATI Radeon X600.

Thanks in advance.
 

A:Dual Monitors Optiplex 760 Tower

7 more replies
Answer Match 64.68%

Hi,I am looking into upgrading the gpu of this 745 that I currently don't have yet. I have my eye on an Asus NVIDIA GT 710, but was wondering if it will fit in terms of height. I read online someone expressing concerns about it needing two slots space, but that was never clarified or refute in the discussion. Would this one fit?If not, what other options do I have in a similar price range? I would prefer to go for a 2GB card, but will settle for 1GB if I have to. Thanks for your time.Regards

More replies
Answer Match 64.68%

Hello,
I own a Optiplex 760 Mini Tower. 
I found out that I have a 0G214D Motherboard. Unfortunately I still can not find out if this means I can upgrade to a Quad core. Can you please tell me if this is the case and which CPU is the most powerful Quadcore I can use? And if not wich of the Dual cores I should use. BTW, i use an Nvidia  GTX750ti using 60W.
Thank you and all the best
Julian

A:Optiplex 760 Mini Tower Quadcore

http://www.dell.com/downloads/ap/products/optix/optix_760_tech_guide.pdf
Q9650 is max.  Bios update should be done BEFORE trying to change cpu.

 750 TI only fits in the TOWER and Only After Cutting the Bracket off and ONLY with Short cards with 1 fan aka 8.4 inches max.

There are no single slot cards.   If one was put in they hacked the bracket in half or removed bracket altogether.  If you remove the bracket on EVGA models you can use tin snips to CUT OFF half the bracket.  The cooling vents are blocked so you might also have to drill holes in the case to let air out.  Long Cards with 2 fans DO NOT FIT and WILL NOT EVER FIT into the Tower or any other size.

Only Short cards with Short fans Fit.

1 more replies
Answer Match 63.84%

i have searched the forum but have not been able to find anything that says it is ok to use a regular atx power supply in an optiplex 960 mini tower.  I have an 620 mini tower and it uses a regular atx but no info on the 960.  Anyone know if it is ok , or have to use dell only power supply

A:atx power supply with optiplex 960 mini tower

Optiplex 960 MT power supply upgrades

1 more replies
Answer Match 63.84%

I have a Intel core2 duo E8400 3.00 GHz and 4 sticks of 2 GB ram sticks = 8 GB
Please tell me what i can upgrade to max for best performance i dont know that much.

A:Max processor and ram for the Mini-tower optiplex 755 (BIOS A17)

You are maxed out at 8GB.

1 more replies
Answer Match 63.84%

I have an Optiplex 790 Mini-Tower with an i5-2400 and integrated Intel HD 2000 video.
The case has both a VGA and Display Port connector, I am presently using the VGA port. I am investigating going for a Dual Monitor setup and am confused whether I can do so without having to purchase a discrete video card. I am reading conflicting reports that some say yes and others no. Can some kind soul please confirm one way or the other ?
I do not use the PC for gaming, it is work only with the occasional video and web browsing. Mainly I need dual monitor for multiple file editing, scripting, database programming etc.
Many thanks, Fin.

A:Optiplex 790 Mini-Tower Dual Monitor ?

Hi Fin,
OptiPlex 790's onboard video solution supports both VGA and DisplayPort at the same time. You can connect two monitors to the computer without adding a discrete card.
Please let me know if you need further information.

4 more replies
Answer Match 63.84%

I'm wanting to get myself the Q6600, and I own the Optiplex 760 Mini Tower. My motherboard is 0M858N.
I've had problems finding answers for this, some say it can, some say it cannot.
Does anyone have an idea?

More replies
Answer Match 63.84%

We have a Dell 390 tower that has 1 pcie x16 port and 2 pcie x1 ports. We have 3 additional videos cards other then the onboard but we are having difficulty getting all the video cards to work. The mutiple option only comes up when you add the video card in pcie x 16 slot but will not come up if you remove that card and put video cards into the other slots. Need help getting all video cards to work at the same time.
Additional Video Cards ( all 3 besides onboard) are : 
 EVGA GeForce 8400 GS DirectX 10 01G-P3-1303-RX 1GB 64-Bit DDR3 PCI Express 2.0 x16 HDCP Ready Low Profile Ready Video Card
We have converter cables converting the pcie x 16 to pcie x 1. We've seen where other people with this same setup have gotten them all to work together but we just can't crack the code...any suggestions?

More replies
Answer Match 63%

I cannot get an OptiPlex 755 Mini Tower to power on. It had been running fairly continuously in an office environment on a APC battery backup/surge protector until it failed Monday morning. Then there was some orange light that was flashing or continuous. When the computer was turned off, it would not come on again. Sorry for the vagueness, but this is second-hand information. I found a fair amount of dust inside, but I've seen far worse on computers
When I push the power button I get no change: no light in the power button, no diagnostic lights, no sounds, no fan movement. When I connect it to power the "AUX LED" light on the motherboard comes on a solid yellow/amber so the PSU is putting out something.
Is this likely to be a PSU problem? Is there some way to pin it down other than buying a replacement PSU?
Thanks for any help,
Joe M

More replies
Answer Match 63%

There is a design problem with the OptiPlex 7040 Mini Tower case that leads to excessive noise. The plastic grid panel on the front of the case rattles loudly, especially when the system is operating under a heavy computational workload. I'm not certain if the vibration originates from a fan or from the hard drive, but it's clearly causing resonance in that plastic front grid panel. I'm certain that the front panel is what's making the noise. The noise goes away completely if I press my finger against the front panel (and resumes immediately when I remove my finger). My current workaround to the problem is to prop up the front of the case with a piece of bubble wrap. Dell's engineers should consider altering this case design to address the vibration problems.

More replies
Answer Match 63%

Hi, I am doubting wether my Optiplex 755 is a Mini Tower or SFF model.

I found the following tagd:

Service Tag: 
<ADMIN NOTE: Service tag removed per privacy policy>
Express Service Code: 
<ADMIN NOTE: Express service code removed per privacy policy>

I cannot find the explanation on the website.

Does anybody know where I can find the info?
thanx

A:Finding out Model 755 Optiplex service tag Mini Tower or what?

Match the appearance of the case with the photo in the pdf below (from L to R, mini tower, desktop, SFF, and ultra SFF.
www.dell.com/.../opti_755_techspecs.pdf

3 more replies
Answer Match 63%

Hello, my Optiplex 7040 just arrived this week.  I bought a Kingston 120mb SATA ssd in a 2280 stick, so I'm trying to see if I can use this for my main boot drive (Windows 10) and then move the 500gb 3.5 Sata drive over to a storage drive.When I install the 120gb 2280 stick into the M.2 slot, and load the bios...   *It shows up under General / System Information / PCI information / Slot5_M.2 & also under Device Information / SATA-4   *When I look under System Configuration / Drives, it also shows up under SATA-4 here as well.  However, it's showing up as a 0gb Drive under 'type'!
So when I boot from a USB drive to try and reinstall Windows on this M.2 stick, it's not showing up at all.
When I connect the M2 SATA drive and load Windows on the existing 3.5 SATA drive that came with the 7040, the M2 2280 stick shows up in 'device manager' under the hard drives.  The serial # there corresponds to a Toshiba-form hdd; unfortunately, I can't do anything with it in Windows 10.
SATA operation is set to AHCI, and I am booting into legacy with the USB.Any thoughts?  I'm wondering if maybe I have a dead memory stick.  There's no real way I can test it on another computer to see what happens.

A:Optiplex 7040 Mini Tower M.2 slot upgrade....

For Windows 10 you should have a UEFI Boot with SecureBoot Enabled. The USB should be made using the GPT partition scheme for UEFI BIOS. I hope you mean 120 GB and not 120 MB....
See here for details:
http://dellwindowsreinstallationguide.com/download-windows-10-oem-and-retail-iso/ 

2 more replies
Answer Match 63%

Hi everyone, I'm new on this forum. I bought 2 years ago a dell optiplex 3010 mini tower, suddenly it stopped working, I have no screen, no video or any kind of sound, the only thing it does is to light up the number 3 & 4 lights on the front panel. What can I do ?

Thanks

A:Optiplex 3010 mini tower diagnostic lights 3 & 4

Hi ,
Thank you for writing to us ! 
To understand the cause of this issue I would ask you to try these steps and advise the result ,
*Disconnect the system from wall socket ,then press and hold the power button for about 15 - 20 secs .Then connect the system to wall socket and try to turn on the system .Here we are trying to release static charge from the system .
*Then disconnect all the peripheral components from the system and try to turn on the system .
*If the above step fails then remove all the memory modules from the system and try to turn on the system with only 1 memory module at a time .
If there are any more queries do reply to this post with system service tag sent via private message .
Hoping to hear from you soon .
Kind Regards,

8 more replies
Answer Match 62.58%

I ordered the new Optiplex 7040 minitower and its a horrible design.  I tried to open the case and they have a plastic tab that snapped off.  the spring and slide assembly inside. You can't reach the expansion bays and the case design is horrible.  It reminds me of the old style Acer PC's that ended up being throw aways.  Sending this one back right away.  Biggest flop I've seen in a new Optiplex!

More replies
Answer Match 57.12%

Hi, Currently I'm using a dual core 6850 and I'm thinking about buying a quad core. I have a PSU of 500 W as spare.

Can i replace the CPU to a Quad Core without changing the cooling system?

A:replace dual core CPU by quad core what about heatsink? in Mini Tower 755 Optiplex

heinflhs
These are the specs of the spare PSU. Aren't they better than the original Dell PSU?
That power supply is ATX and not EPS12V
Better is not the issue.  Dell power supplys are 80 percent efficient not 70 percent ATX.  The -5v rail is an issue as well as this may cause a motherboard fire or damage your system.  Its a dead giveaway that this is a power supply from 1990 to 2000.
What current is on which rails is not trivial. There is a single 12V RAIL on that unit and its max is 17A
EPS 12V units have multiple rails of 12V @ 18 amps each.  MAX Power on the 12V rails is 264w not 204w
That unit has a lot more on the 5V and 3.3V rails at the expense of the 12V rails and CPU 4 pin connector. So no that spare unit is not likely to work well if at all.

Recommended update or replacement is EVGA 750B1

4 more replies
Answer Match 56.7%

Two drives on system 265GB Samsung on motherboard and 1TB drive internal bay.
Dell installed OS on drive 0 (C) 1TB (slower drive) and the SSD drive(fastest) drive 1 (E) blank empty.
Make no sense to me.

More replies
Answer Match 56.7%

What is an "add-in" graphics card (definition) on an Optiplex 990 tower? What does that mean?

I can't find a definition on the internet.

Thanks

A:What is an "add-in" graphics card (definition) on an Optiplex 990 tower?

A card going into a PCI-E SLOT AKA PEG.

1 more replies
Answer Match 56.7%

When the PC starts up, the dell loading screen begins. Normally this takes around a few seconds but this time it didn't end. We've tried all the diagnostic tests and they all came back fine. Also tried disconnecting all external cables (ie headphones, ethernet etc). Powered on and off multiple times and no change. 
By the way, I don't know if this is related or not, but last night before the issue occurred, I was randomly logged out. Once it logged me back in, everything was closed and there was a small square of like TV static towards the bottom right corner. I restarted and it fixed the issue there but I don't know.
Thanks in advance, Sean

A:Dell Optiplex 9020 AIO stuck on Dell loading screen

Unplug the system and hold the power button for 30 sec.  Then try powering up again.

2 more replies
Answer Match 54.6%

Looking for feedback on this new desktop. I am looking to replace a Dell XPS435T / 9000 that I purchased in April 2009 which has served me well.

1. Does the XPS Tower VR require s "Pure Sine Wave" UPS like the XPS435T / 9000?
2. I am planning on having a total of there hard drives in addition to the SSD. Based on the information that I have seen this seems to be possible.
3. I am also trying to determine exactly what 512GB M.2 SSD is being provided.

More replies
Answer Match 54.18%

i have a hp pavilion374n with 1.2 gb of ram a radeon 9250 pentium 4 2.00 Ghz i have xp sp2 it work on my computer?
 

A:wondering if wow will work on my desktop

dupe thread. Use this one: http://forums.techguy.org/games/674730-worried-about-wow-not-working.html
 

1 more replies
Answer Match 53.76%

I have a Dell tower (see details below) and it started having problems freezing about a week or so ago. It has gotten worse to the point where I have to reboot by pressing the power button 5 or more times a day. I ran an Avast full scan and an Ad-Aware full scan with nothing found.

Here are the system details:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD E-450 APU with Radeon(tm) HD Graphics, AMD64 Family 20 Model 2 Stepping 0
Processor Count: 2
RAM: 3818 Mb
Graphics Card: AMD Radeon HD 6320 Graphics, 256 Mb
Hard Drives: C: Total - 461477 MB, Free - 333973 MB;
Motherboard: Acer, HMA51-BZ
Antivirus: avast! Antivirus, Updated and Enabled
 

A:My Dell tower is freezing.

I uninstalled some "junk" and disabled my IE add-ons and accelarators but it still freezes. Clt-Alt-Delete does nothing - I have to hit the power button to reset it.
 

2 more replies
Answer Match 53.76%

Had a KDM-MTFX9320 320W TFX. Ordered a KDM 320W FLEX MFX 9320C. Will this work?
 

More replies
Answer Match 53.76%

I have been buying Dell XPS computers for the past 15 years (I have 6) and I don't understand the new XPS tower.

Why does the Dell XPS 8910 have a laptop optical drive instead of the standard 5.25 desktop optical drive? I always thought of the Dell XPS as the top of the line consumer computer, but laptop optical drives are less reliable and have poor read/burn quality compared to desktop optical drives.

Did Dell really remove the front 5.25 bays from the tower? Why would they do this on the XPS tower?  I need the front bays to install two 5.25 optical drives.

I see the XPS 8900 has the standard drive and bays, but is that model discontinued? Are there other Dells that have the front 5.25 bays? It appears Dell also removed the bays from the new Inspiron desktop line.

More replies
Answer Match 53.76%

Hi everyone, newbie here :) My question: I recently purchased a refurbished Dell 780 Optiplex DT, small form pc. I would like to put in in a tower case, that way I can use a standard dvd drive, and and perhaps a better power supply (I did some research and found a wiring schematic showing how to convert a standard supply to work with these little fellers :) but not sure what type case to use..any suggestions? 

More replies
Answer Match 53.76%

I was on my computer when it froze. I tried to get to the task manager by clear alt delete bt it wouldn't work. So I shut it off via power button. When I tried to stat it up it wouldn't turn on. I tried checking the cords and the power source but I couldn't find anything wrong. I unplug the powe cord and tried again the CD drive light and a yellow light below the power light flashed but nothing else. The power light seems to be red. I don't know what's wrong with it could you help? My computer info Compaq Windows XP Home Editor, Intel inside celeron processor. Thank you.
 

A:Help! Mt Tower won't work

16 more replies
Answer Match 53.76%

Ok so a friend gave me an old Emachine T5062. It has a 300 watt PSU in it. I'm going to put in a GT 430. Was wondering if it would be compatible. I have a 8400GS in it at the moment, and it's workiing smoothly. But this is a big leap in tech. Just going to ask you guys, because I trust all of you.
 

A:Solved: Was wondering if this GPU would work in this old puter.

16 more replies
Answer Match 53.76%

Hello all,
I am in need of a very basic internet browsing/emailing desktop system. I just bought the following computer and display off of newegg:

http://www.newegg.com/Product/Product.aspx?Item=N82E16883103097
http://www.newegg.com/Product/Product.aspx?Item=N82E16824009091&Tpk=AL1916WAbd

The acer system has integrated Radeon X1200 graphics. I realize this only has VGA out and that I would sufffer loss of quality not getting a PCI express video card with DVI out to that Acer LCD. But since this is just an internet/office system I wanted to save the dough...

But I just had a thought. Is it going to be likely that the X1200 won't support the resolution of that Acer LCD (which is 1440x900)? And if not, would it be possible to get drivers that adds that resolution?

And if all fails and I can't run that display at 1440x900 using the integrated graphics, any recommendations of a *really* cheap PCI express vid card that won't cause me a compatibility headache? The system will never be used for gaming, high end apps, etc. Just email and web browsing.

Thanks for any insight or suggestions!
Ed
 

A:Just ordered a pc and display and am now wondering if it's going to work?

Email and browsing... you should be fine D-Sub out, D-Sub in (VGA is D-Sub)
 

4 more replies
Answer Match 53.76%

Hello All,

I have a Gigabyte K8NS Ultra 939 MoBo which is rated at their website for:
AGP 4x/8x (with a latch) ? supports only 1.5V video cards. Right now I have a vgc that is 128mb and want to move up in the world. My question is this. If I get a new vgc that requires a power supply from the psu, will it still work on my motherboard. I know I will have to get a nEW psu seeing as my current one is low grade but I was wondering if my MoBo will even run a vgc that needs power from the psu. My current vgc draws power directly through the AGP slot.

Thanks eveyone
 

More replies
Answer Match 53.34%

Hi all.....this is my first post. I bought a cheap ac power supply for my Dell inspiron 6000 when the original died. Yesterday, it failed. Upon inspection, I realized the power supply was shorted out. I replaced it and nothing happened...no light no sign of any power to the computer. I think I may have shorted out the computer and was hoping there is some sort of internal fuse that could be switched out. thanks for any help!
 

A:Wondering if there is an internal fuse in my Dell Inspiron 6000

most likely when the psu died it took the motherboard or cpu or ram or the battery with it. the only way to tell what parts are still good is to test each part is a working computer
 

3 more replies
Answer Match 53.34%

Query: I now have a Dimension 2350--Premium 4CPU 1.8 GHz. I have added Ram to 768 MHz. It is now about 9 years old. It has a failure of the heat sink clamp and I need to replace. I would like to know what new models (tower) that are similar in layout. [ports, hardware slots, size etc.] I want enough hard drive, ram that would be useful for several years.










Solved!
Go to Solution.

A:What model Acre Tower is like my old Dell?

Something in our T series is probably the most similar in look and feel to your old Dell. You can see a full list of models and specs at http://us.acer.com/ac/en/US/content/series/aspiremt.
 
 



Important Links: US Driver Downloads | Knowledge Base Articles | Service LocationsRemember to mark posts that resolved your issue with Accept as Solution.You can even mark multiple posts in a single thread. This will make it easier for others to find the same information.










View solution in original post

3 more replies
Answer Match 53.34%

We have a Dell Precision Tower 3620 and have purchased a firepro W7000 to install. only problem is the 6 Pin connector provided by dell has a different pin arrangement. the middle top pin as you look at the plug is square instead of the usual rounded corner pin so will not go into the socket.
Anyone know why this would be?
Thanks
Aaron

A:Dell Precision Tower 3620 GPU 6 PIN

The only video cards validated in the Precision T3620 did not need the power supply lead. So this may be why the 290w PSU is lacking the correct cable? Perhaps another Precision T3620 can open their case and also check the PSU cabling.

1 more replies
Answer Match 53.34%

Query: I now have a Dimension 2350--Premium 4CPU 1.8 GHz. I have added Ram to 768 MHz. It is now about 9 years old. It has a failure of the heat sink clamp and I need to replace. I would like to know what new models (tower) that are similar in layout. [ports, hardware slots, size etc.] I want enough hard drive, ram that would be useful for several years.











Solved!
Go to Solution.

A:What model Acre Tower is like my old Dell?

Something in our T series is probably the most similar in look and feel to your old Dell. You can see a full list of models and specs at http://us.acer.com/ac/en/US/content/series/aspiremt.
 
 




Important Links: US Driver Downloads | Knowledge Base Articles | Service LocationsRemember to mark posts that resolved your issue with Accept as Solution.You can even mark multiple posts in a single thread. This will make it easier for others to find the same information.










View solution in original post

3 more replies
Answer Match 53.34%

Okay so my friend wants me to fix his old Dell Tower because it won't boot. I press the power button and the green light on it turns on, but nothing shows up on the monitor, its not the monitor I've tried multiple ones. I cant tell if its a boot problem or a graphics problem or what. I'm really not that good at hardware on computers so try to speak as English as possible please, thanks for the help!
 

A:Old Dell Tower Wont Boot

6 more replies
Answer Match 52.5%

I have a Dell Precision Tower 3620 that was purchased May 2016. I'm looking to use the Thunderbolt capability but can't find the addin card that I'm supposed to use. This unit was advertised as having Thunderbolt capability but I can't seam to find how to take advantage of it.
Thanks
Jason

A:Dell Precision Tower 3620 Thunderbolt

It looks like its an add-on card that you purchased with your build.  If you didn't select it at time of purchase, then it didn't come with it.  You can always buy a PCIe add on card yourself and throw it in the computer.

1 more replies
Answer Match 52.5%

Hello my name is Sebastian Todd, I've been using my dell computer for more than 2 years now with absolutely no problems affecting it, due to my proper maintenance. About 1 month ago, I turned it off by clicking the "shut down" button. Ever since then, I haven't been able to turn it back on. When I push the power button on the tower, it emits a yellow/orange light for about a quarter of a second. I know for a fact that there is a sufficient power supply, due to the green light being emitted on the back of the tower. I don't know what to do, and am not economically ready to purchase a new computer. PLEASE HELP! (inspiron 545)

- Sebastian Todd

A:Dell Tower won't turn on/boot - (inspiron 545)

sebtodd
Does the power supply fan run/work?
The green light on the back of the power supply does not indicate that the power supply has not failed, it only indicates that power is reaching the PSU. What colour is the power button light, is it Blinking, Solid or Off?Are there any 'Beeps'?
 The Inspiron 535/537/545/546 Service Manual, is here:
ftp://ftp.dell.com/Manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/inspiron-546_Service%20Manual_en-us.pdf
The Troubleshooter, is here:
ftp://ftp.dell.com/Manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/inspiron-546_Setup%20Guide_en-us.pdf
Bev.

11 more replies
Answer Match 52.5%

When I went to turn on the pc pressed the power button nothing happened.
I checked the plug moved the plug into another socket even a green light is showing at the back

More replies
Answer Match 52.5%

hi everyone,

hope you all had a very merry christmas . what i want to do is upgrade my motherboard and processor. i have picked out a motherboard and processor but i am unsure if they are 100% compatible with each other. i have the links to the websites so you can see what you think.

CPU:
http://www.planetmicro.co.uk/product_info.asp?stockcode=M002737&source=kelkoo

Motherboard:
http://www.novatech.co.uk/novatech/specpage.html?GIG-100487

another question is that i have 1GB pc2100 DDR RAM in my existing computer. if the motherboard and processor are compatible, would my old ram work too?

i would be grateful for any help.

rooster
 

A:wondering if this motherboard and processor will work togethor and a little advice

16 more replies
Answer Match 52.5%

I have a fairly new Radeon 8500 video card (the 128 MB version) in my PC. I need to replace the card in my G4 to get my new cinema display to work. Will the PC Radeon card work in the G4 tower? It has an AGP slot for the video card. I am just wondering if there is a difference between Mac and PC AGP cards?

Thanks!

A:Will a PC AGP Video card work in a Mac G4 tower?

Please do not double post..............................:no:

See http://www.techsupportforums.com/sho...&threadid=2741

1 more replies
Answer Match 52.5%

Hello I am new to building the pcs so I am afraid I may have fried mine I really am pry I did not but this is what happened.

I finish the pc and when I turned on the power supply the power button on the motherboard glowed so then I pressed my tower button and nothing worked so then I re setup he F_PANEL cords u know the pwr switch and all that jazz. turns out it was set up wrong so I put them in right and tried to turn on the computer again the power button on the motherboard turns on but not my towers power button and so my pc will not officially turn on I am guessing and I am worried that I may have fryed my pc because when I took out the f panlle cords I realized my pc was still on and turned it off immanently and I am afraid that may have fryed the motherboard if anyone can help me it would be wonderful I am freaking out and have no Idea what the problem thank you for reading
P.S My tower button does not making a clicking sound when you push it I am not sure if that normal or it is broken or somthing it just doesnt make any click sounds
 

A:My tower Power button will not work

You could have a defective power switch on the PC case. Test this by using the reset switch as a temporary power switch. The power switch and the reset switch are the same for practical purposes except, of course, the size of the button (on most cases). If the reset switch works and is able to start the PC, then you know the power switch is defective.
 

8 more replies
Answer Match 52.5%

I'm using the following to the current XP style on that XP machine:
Code:
Private Declare Function InitCommonControlsEx Lib "comctl32.dll" (iccex As tagInitCommonControlsEx) As Boolean
Private Type tagInitCommonControlsEx
lngSize As Long
lngICC As Long
End Type
Private Const XMLFile = "<?xml version=""1.0"" encoding=""UTF-8"" standalone=""yes""?>" & vbCrLf & _
"<assembly xmlns=""urn:schemas-microsoft-com:asm.v1"" manifestVersion=""1.0"">" & vbCrLf & _
"<assemblyIdentity" & vbCrLf & _
" version=""1.0.0.0""" & vbCrLf & _
" processorArchitecture=""X86""" & vbCrLf & _
" name=""WinXp""" & vbCrLf & _
" type=""win32""" & vbCrLf & _
"/>" & vbCrLf & _
"<description>XP Style</description>" & vbCrLf & _
"<dependency>" & vbCrLf & _
" <dependentAssembly>" & vbCrLf & _
... Read more

A:VB6: XP Style doesn't work with User Controls

Not sure if this is what you're looking for, but to create XP-style looks to your applications add a manifest file to the directory of your executable. To do this, open notepad, and copy the following text:

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"> <assemblyIdentity version="1.0.0.0" processorArchitecture="X86" name="CompanyName.ProductName.YourAppName" type="win32" /> <description>Your application description here</description> <dependency> <dependentAssembly> <assemblyIdentity type="win32" name="Microsoft.Windows.Common-Controls" version="6.0.0.0" processorArchitecture="X86" publicKeyToken="6595b64144ccf1df" language="*" /> </dependentAssembly> </dependency> </assembly>

Save the file as your application.exe.manifest
For example, for your application called Pong, you would call the file Pong.exe.manifest

Now simply run your exe and it should be converted to XP style. I'm pretty sure this would only work with XP machines, so if you tried it on a Windows 2000 machine it wouldn't look like XP.

If this isn't what you need let me know.
 

3 more replies
Answer Match 52.08%

Hi there, i'm about to receive my XPS 8910 Desktop in the mail today and I have a new 8TB to add to it. I was wondering if there was an extra SATA cable inside the housing or do I have to buy a separate SATA as well as a power cable to hook up to the extra drive to the motherboard? Would a splitter work?

That, and do I have to buy extra screws to mount the new drive in place? Thanks guys!

A list of the cables and parts I would need to add the new hard drive would be greatly appreciated.

All i'm assuming is:
An extra SATA cable
A SATA power cable
or a SATA splitter?
Screws to mount the hard drive.

Am I missing anything?

A:What do I need to add an extra hard drive to my Dell XPS 8910 tower?

The unused power supply leads will be tied up near the power supply. No, we would not provide extra SATA cables. The two #6-32 X 1/4" screws will be on the hard drive cage and bracket, page 12. Before you get the 8910, you should review the 8910 Service Manual linked above.

4 more replies
Answer Match 52.08%

Does anyone know an adapter with two display ports that fits into this Dell Precision T7610 CTO Base, that also have a very good quality?

A:Dell Precision T7610 CTO Base (Tower Workstation)

Here is the spec for the T7610 from the Dell manual, it doesn't relate to the "CTO Base".
Discrete (PCIe 3.0/2.0 x16)

T7610
up to 4 full-height, full length (maximum of 600 W)


This suggests you can use many different video cards. . You say "display ports". What are you referring to? "DVI", "VGA" or the actual newer Display port interface?

Dell also has a support forum, staffed by mostly users like this forum. That is another alternative for specific Dell hardware help.
http://en.community.dell.com/support-forums/desktop/

2 more replies
Answer Match 52.08%

i searched in a lot of forums to see if a gtx 750 ti is compatible with the dell 660 mini tower and i cant find a reliable source and i need help to see if its worth it to get it if it is compatible.

 

More replies
Answer Match 52.08%

Hi out there to Vistax64. I am a recent XP to Vista user. I have a Vostro 200 mini tower (specs below) that has been running XP pro for the last few years - couldn't stand the GUI anymore lol - so I installed Vista HP and am very happy with the new interface and features. After tweaking some, the desktop appears from cold start in 30 seconds or so and almost everthing runs as snappy as it did before with XP. But the task manager is showing an average use in physical memory of 1.17 gigs, CPU usage is higher, and some, not all, internet pages scroll slowly e.g. Yahoo news pages, Hearts of Space etc. where as they were fine before. Everthing else on the internet, including this site, works well - though a few installs like Starry Night Enthusiast and a John Deere farm game are slower.

My question is this: Would installing a seperate video card give me better all-around performance or would another gig of ram do the trick? And what brand/type of video card do you folks recommend?

Intel Core2 Duo E4500 @ 2.3ghz
2 Gig of Kingston RAM
Intell G33 Express Chipset (on motherboard)
80 Gig WD SATA Hard Drive
Seasonic 350w PSU


Thanks for the opportunity to have my questions answered and I'm looking forward to cruising the site here!

A:Video Card For Dell Vostro 200 Mini Tower

Windows will allot 50% of your ram by default, for when you need them programs. Remember, rams fastr than hard drive, and why have all that ram and not use it.

For your power supply, a nvidia 430/440 or an ati/amd 6450, maybe get away with a 6550... Seasonics are quality.

The slowdown is probably because Vista is a bit more of a beast than xp, and graphics can be a bit more hefty.

4 more replies
Answer Match 52.08%

I need help looking for a Graphic Card for a DELL Vostro 230 Slim Tower to replace the integrated Intel GMA X4500. The manual says it can take the NVIDIA GeForce G310-512MB, but i can't find it anywhere to buy as it is an OEM graphic card.

I've read that the NVIDIA GeForce G310 is identical to the GeForce G210. So i go and purchase it to find that it is to big and DOE'S NOT FIT !!!

Has anybody got any other suggestions ???

Here are my Tech Specs...

A:Graphic Card for DELL Vostro 230 (Slim Tower)...

The reason you can't find the G310 to buy is that Nvidia made it only available to what is known the OEM channel, basically means it can only be bought from system builders (Dell, HP, etc). Spec and build-wise the G210 and G310 are identical, so in what way does it not fit? If it is the back plate bracket that is too long the card should have come with a second shorter one (2 of them actually) like the ones shown here,

3 more replies
Answer Match 52.08%

Hi,
Last night i was updating the bios on this 3620 and it froze at 100%, after 30 minutes or so i forced to reboot.
Now always as an Amber light blinking when i connect the power cable and only the fan starts to spin for a few seconds and turn off in a loop.
I already try CMOS reset - nothing
Jumper in service mode - nothing
Is there any way to flash a bios from an USB drive. I've been reading a lot of foruns and all talk of some switch /writeromfile but doesn't work on this dell bios setup.
Does any one have an idea for me to try?

Thank you very much

More replies
Answer Match 52.08%

Hi guys I need some help please my dell optiplex 745 sff will not boot up just amber light at points abcd and real loud fan
 

A:dell optiplex 745 sff

my guess would be that this was after some kind of storm or power surge. can you see the bios loading? in order to diagnose this you will have to have parts that are known to be good and go through the machine one piece at a time. The main suspects right now is the power supply, CPU, or the mother board. Do you get any audable beeps when it is trying to start up?
 

2 more replies
Answer Match 52.08%

I was trying to install windows Xp sp2 on a Dell computer: Optiplex 755. When the software reach that step: setup starting windows a blue screen display saying windows has been shut down to prevent damage, check for viruses, check your HDrive, etc?
I removed that HDrive, and I installed to another Dell computer same type (Optiplex 755) I started the process of that windows Xp sp2 (installation) everything was fine. Now I switch back the HDrive to the first Dell Optiplex 755. I power on it started loading properly when it?s about to reach the screen that has the recycle bin. The blue screen display again with the same message, windows has been shutdown to prevent damage etc?, at this point which one to accuse the memory or the Bios, any help will be greatly appreciate.
Dody127

A:Dell Optiplex 755

That PC uses SATA drive controllers . . Installing XP on a SATA drive requires an additional step:

http://xphelpandsupport.mvps.org/how...ws_xp_on_a.htm

However, Most newer BIOS allow an Alternate method for SATA . . Go into the bios and check the "Sata Operation" setting,

change it to "Raid Autodetect/ATA if it is not already. Now try to install XP ( could be IDE Mode, Compatibility Mode or Legacy Mode - different BIOS use different terms )

some will say IDE instead of ATA)

If there are no such settings you'll need to slipstream the sata drivers on the XP CD, follow the instructions in this guide :

http://www.digitgeek.com/how-to-slip...rs-into-xp-cd/

or

http://www.howtogeek.com/howto/windo...-installation/


You can get a reinstallation guide specific to your Dell here
http://support.dell.com/support/topi...n&s=dhs&~ck=mn

Are you using the Dell Reinstalltion disc? . . if so is it SP3? Those have the Intell SATA drivers

2 more replies
Answer Match 52.08%

My dell optiplex 755 sometimes won't turn on, and other times will. When I turn it on by the plug you hear it power on but the monitors just go on standby. But others times it powers on perfectly ? I'm confused!??

A:Dell optiplex 755

Hi welcome to TSF

How old is this computer? It could be the power supply going bad.

10 more replies
Answer Match 52.08%

I did a restart on my PC because I had a virus and I couldn't get the virus off now the monitor is froze on one page 1 screen blue asking questions and with them what does the symbol next down at the bottom and I can't there's no air like a woman who I can't get that thing off there I need help Live Help
 

More replies
Answer Match 52.08%

This is a continuation of my earlier thread which says it is locked:

https://forums.techguy.org/threads/compaq-presario-particulars.1161610/

Alas, the unit recommended to me in that thread is sold out.

I have been looking at similar units of the same model number but, as best I can tell, although they have the same name/model, the Dell Optiplex 780 seems to come in two different case sizes, a MF and a SFF, the SFF being the smaller of the two.

The SFF seem to be the more plentiful and about $50 more expensive, while having only 1TB SATA compared to the MT having 2TB.

Am I right in thinking that there are indeed two case sizes; and, if so, which is the preferable ?

Thanks.
 

A:DELL Optiplex 780 ???

16 more replies
Answer Match 52.08%

Trying to fix this thing up for my grandaughter. It has a 200 mh. processor 128MB ram and a 40GB hard drive. Now it seems that the mb. drive controller is inop. At least that is what it says when I try to boot. I was told that it wouldn't support the 40 GB drive anyway so I bought a PCI ATA card. By the way I installed a 6GB. drive to see if the MB.would boot it,and it said the same thing. How can I get it to boot? It seems impossible because I need the PCI card to get to the drive and the system needs the driver for the PCI card to run the drive. Is there any chance???
 

A:Help Dell Optiplex GXi

6 more replies
Answer Match 52.08%

Hi!. I got a not so new Dell optiplex 745 with a old Intel Pentium 4 530 @3.00Ghz with 1gb of sYstem RAM, a 80gb seagate hard drive, a 305w power supply And integrated intel gma 3000 graphics, my question is, Can i replace the old Pentium 4 that is 90nm with a Pentium e5500 or a Core 2 Duo e6750 that are 45nm? also, i will buy a geforce gt430 and a 2gb dual channel ddr2 memory. does the power supply support these three components? also is this a good computer or should i buy a motherboard and install everything from the start?

A:Help With Dell Optiplex 745

Minitower Optiplex 745:
Supported microprocessor types: Intel® Pentium® 4, Pentium® D, Celeron®, or Core™ processor
DDR2 RAM should be installed in matched pairs so you'd need to install 2 of them. But there's no point installing 4 GB of RAM with a 32-bit version of Windows which can only use ~3.0 - 3.5 GB of RAM. Note, this system supports 2 GB RAM modules but only those running at 533, 667 MHz. It doesn't support 2 GB modules running at 800 MHz, but apparently will support smallar modules running at 800 MHz.
 

21 more replies
Answer Match 52.08%

Does anyone know if the Optiplex GXi will work with an 80 GB HD? If not what can I do? That is the size of my extra drive.
 

A:Dell Optiplex GXi

16 more replies
Answer Match 52.08%

I have a dell that does not read the cd-rom. In bios it reads "cd-not installed. Does that mean adding text to a file? Look at photos
 

A:Dell Optiplex 260

It displays "cd-rom device NOT installed". So the drive is faulty or not connected properly.
 

3 more replies
Answer Match 52.08%

hi there My dvdrom hardware seems to be acting weird it will eject but will not play or autoplay the discs,
it just simply does not detect any discs are present
 

A:dell dvd rom 745 optiplex

7 more replies
Answer Match 52.08%

I have a dell optiplex Gx 270 it powers up but with no dislay on the monitor boots up and from the on board speak you can hear that Windows xp has loaded but still displays nothing. I have change my ram, i have tried a pci display card, but still to no avail and i have also tried heating the display chipset on the board and still have same redults someone please help.
 

More replies
Answer Match 52.08%

It's an older dell (Optiplex 320 3mhz single core w 2 g ram) with onboard graphics. Want to put a 256 or 512 mb pci e card in as an upgrade. Any economical suggestions?

A:dell optiplex 320

Do you have the Mini tower or the desktop model 320?

4 more replies
Answer Match 52.08%

I have a Dell Optiplex 745 SFF with a Pentium D 945 3.4GHz 2x2mb I would like to upgrade the processor to the best possible option but not sure what if any I can upgrade to? 2nd question What would be the best Nvidia Geforce Graphics card I could upgrade this system to? Thank you for any help you can offer!
 

A:Dell Optiplex 745 SFF

16 more replies
Answer Match 52.08%

I am new to this site, and I am needing some help. I am trying to erase the hard drive on a Dell Optiplex 755 with Windows XP, and reinstall factory settings. I have already reinstalled major drivers once, but the user says that this harddrive is "buggy", and since I'm suppose to be the IT guru he wants me to do a factory reset. My two questions are this. First. Is it Ctrl F11 or F12 that I hold when starting up, and where do i go from there? Secondly. Do I need anything like killdisk or paragon disk wiper pro to fully erase harddrive?

Thanks for youtr help.
TColey
 

A:Dell Optiplex 755

Here is the support site for the Dell OptiPlex 755.

---------------------------------------------------------------

Here is the user guide for that desktop.

Expand the "Troubleshooting" menu and then expand the "Restoring Your Operating System" menu.

---------------------------------------------------------------
 

1 more replies
Answer Match 52.08%

Hello I have a dell optiplex 755..

I have 2 gigabytes of ram
I have 256 mobile intel graphics card
I have a dual core 2 duo processor


I want to buy a new graphics card but i cant decide what to get and i dont know wheather it is a ddr2 or ddr3 ... i want a graphics card for good games like NFS all the new versions and some other good new games ..

Please i need ur help asap .. Ty


Hadi,
 

A:Help with Dell Optiplex 775

I couldn't find a place to install a graphics card on the motherboard, can you?
 

1 more replies
Answer Match 52.08%

Has anyone installed Windows 7 on a Dell Optiplex GX 280? I am trying to install and and I get as far as the initial "starting windows" where setup begins at, and I get

STOP: c000021a {Fatal System Error}

Anyone know what is wrong?

A:Dell Optiplex GX 280

Press F8 during boot. Select Last Known Good Configuration. If this works, we will take it from there.

9 more replies
Answer Match 52.08%

I just purchased a (barely) used Optiplex 960 from my office (my employers often sell used equipment to employees if they want to get rid of it).  It's in great shape, clean, and all the hardware seems to work, except for the fan speed controller.  I know it's supposed to adjust the speed of the cooling fan depending on how hot the CPU is getting, but it's not doing that.  The fans seem to stay on low / medium speed even when the CPU is pushing 70 degrees C according to Speedfan...which is WAY too hot.  The only way I can get the fan to speed up is by disabling the auto-speed control in the BIOS and leave it on 100% constantly. 
Anybody have any suggestions?  Is the temperature controller damaged, or do these systems normally run hot?  Thanks!

More replies
Answer Match 52.08%

Hi,
I am using Dell optiplex 390 we wanted to know that in Serial port which is connected in cpu for db9 contains full handshaking i.e wheather it supports UART TX,RX,CTS&RTS functionality.
Thank you,Deepanraj.A

More replies
Answer Match 52.08%

I need information about the following:
I owe a Dell Optiplex 745 sff running Vista Business,
hard disk is a 80 Gigabyte sata
The hard disk is almost full and I wish to take it out and replace same by a 2.5" sata hard disk.
Can anyone tell me whether this is possible and if so how to go about it?
Because it's a small form factor it can only hold one hard disk.
Your advice will be highly appreciated and thank you beforehand.
jvhelden
 

A:Dell Optiplex 745 sff

11 more replies
Answer Match 52.08%

Hello,I purchased an Optiplex 380 a couple of years ago which came with 2x2GB RAM @ 1066Mhz and now I think time has come to upgrade to at least 8GB. So, I tried a kingston value ram of 4gb @ 1333Mhz and unfortunately it beeped with 1 and 3 diagnostic LEDs lit. I know that the Dell manual says a maximum of 4GB ram but I have seen people here on dell forums running 2x4GB without any problems, so according to my thinking, maybe the bus frequency is the problem? shall I try 1066Mhz? Crucial's site also suggests up to 1600Mhz so whats the confusion here?P.S. I have latest BIOS A07 flashed.

A:Dell Optiplex 380 max RAM

Hi,
Thank you for reaching out.
Did you try 8GB(4+4) or Does it beeps even with a 4GB stick in one slot? 
Try each stick on both the slots, If that fails, you may try 1066 mhz.
P.S:  We haven't tested 8GB configuration on this motherboard from the factory, If none of the steps works, You may have to revert back to 4GB. 
Thanks. 

29 more replies
Answer Match 52.08%

Hi everyone,

I have been looking up about getting a replacement for my existing CPU which is an Intel Core i5 (Version: 2400) and upgrading to the new Intel Core i5 4460 which does support HD better for what I needed, such as movies and gaming (I only need up to 60FPS).

But other than that, I have been looking either at a portable GPU. The GPU is called a Zotac GeForce GTX 960 4GB (from NVidia). I just want to know if this will fit and will it work well with my PC?

I just want to know if the new Intel Core i5 4460 will fit in the Optiplex 390's motherboard, the same for the Zoatac GeForce GTX 960 4GB GPU.

But I would be interested to see what you have come up with any other CPU/GPU recommendations for this Dell Optiplex 390 Desktop.

Many thanks,

Ben

A:New CPU/GPU for Dell Optiplex 390

Because the optiplex comes in three form factors, which one is it? The Desktop ones? or the smaller one?

Anyways, to be able to upgrade to a Haswell processor you'll need a new motherboard aswell (Those with H81 chipset will do). The Zotac GTX 960 will work provided you have enough juice from the PSU to be able to supply the graphics card

9 more replies