Tech Problem Aggregator

faded product id on fujitsu t901

Q: faded product id on fujitsu t901

the product key on my fujitsu t901 laptop is mostly faded. I had to wipe the computer, and have installed windows 10, but cannot activate the windows 7 license because I can't read it...

More replies
Answer Match 61.32%

Hello there,

I have an issue with reusing this machine which days ago for inexplicable reasons stopped working.

Is it because the HD is an OEM with an already installed Windows XP Professional despite resetting BIOS that it doesn't kick hoff on Scaleo 600?

History: All of the sudden the previous 80GB WDWestern Digital HD was no more detected by BIOS on Scaleo 600, nor can it be read when installed on an external enclosure USB connected to perfectly working PC's and LapTop.

Hence I purchased a new OEM 320GB 7200 IDE from Maplin and tried to install my genuine Microsoft software Windows XP Home Edition followed by XP Professional Upgrade.

All failed because the HD was not detected by BIOS and I kept getting the "no operating system found" message on the black screen.
My conclusion was that either the power supply connectors to the HD, the ribbon cable or the disk itself were not OK.

Hence, I tested the HD on another unused FUJITSU-SIEMENS 1420 Celeron 1.7GHz 1GB DDR and in fact there were no problems to install Windows on that new HD and decided to go ahead.

Now that I have all my software installed on this smaller PC, working perfectly well, I want to run the new package on my other bigger Scaleo 600 4GB DDR which by surprise seems to be in order after resetting BIOS again. The Windows installation worked fine up to the black screen with various options stage. However, whatever I select the system returns again and again to the previous positi... Read more

A:Product:Fujitsu-Siemens Scaleo 600 HD400gb XP Pro doesn't kick off!

as my issue was of no interest to the wide audience I decided to run SetUp and do a Repair. Possibly it's a boring thread related to old machines which however when correctly set work fine and fast.

Done! My files are still there though SP3's gone as well quite a few drivers which will have to be reinstalled and Windows has to be activate again.

3 more replies
Answer Match 53.76%

Reformatted Hard Drive and tried to reinstall Windows Tablet PC Edition from Fujitsu Recovery disc. But get error message "Unexpected error occurred during the optical drive preparing. Can not start the restore disc." and then I get a dos prompt for A drive . I've heard about this before where Toshiba and Fujitsu prevent people using a competitor's brand of CD Drive.


More replies
Answer Match 46.2%

problem is when I was buy a dell laptop that have come with preloaded os (windows 8 )I have available product id but product key not available. now my head drive damaged. Now how to load window 8 OS use previous product key.

How to now my product key using product id :00326-10000-00000-AA870

One time I was replace motherboard on that  laptop on warrienty periode. that time they give me a window product key with seal pack. now when I will go to load window 8 useing that product key my laptop has not accepet that product key

pls solve inform me how to load os on my laptop

More replies
Answer Match 41.16%

when i downloaded the trial version of photo elements it asked me to calibrate something( forgot what it was) it seeems after that all my photo print outs were faded badly

A:faded prints

16 more replies
Answer Match 41.16%

Other Folders Exist
The selected locations do not contain pictures to preview.
Other folders or files exist but can not be previewed.

A:Faded img icons

If you want help. it would be better if you stated what your problem is and even post a screen shot to help with the description.

3 more replies
Answer Match 41.16%

I have recorded my wife's favorite video's, have about 30 disks she watches every day for over 4 years.
She does change them every couple of days.
The video segment is fine, however the audio part needs to be maxed on the volume control .
Some have just lost the audio.
They are DVD RW and DVD R
Is this typical in DVD disks ?
Is the price of what one pays for a disk determine the quality.
I am using a Sony dual unit for recording and viewing.
Other disks that are purchased with programs on do ok.

A:DVD audio has faded out

6 more replies
Answer Match 41.16%

In WordPerfect Office X5: The Previewer shows up fine, but the text in it is barely visible. Is there a way to make it readable?

More replies
Answer Match 41.16%

I have a HP Laser Jet 3100 printe. My operating system is Windows ME. The printer is not printing clearly. It is faded and a little splotchy. I have changed the cartridge 2 times and it still does not print bold enought to read easily. Should I give up and buy a new printer, have this one repaired or is their an adjustment I can do? I have ran cleaning sheets and they look fine to me. What do you suggest?

More replies
Answer Match 41.16%

My computer has recently died the death (multiple errors) and a techy friend of mine has recommended reinstalling Windows.

My problem is that the sticker with the product key on is faded all to heck and unreadable.
Is there any way to reinvigorate the sticker? The top barcode is still visible if that is of any use.

Alternatively I have an old dud laptop (also dead, I think the motherboard burnt out) which was on Vista. The sticker on this one is perfectly visible. Would I still be able to create a vista installation media and then perhaps upgrade to Windows 10.

I really don't want to have to purchase a new version of windows for the sake of a faded sticker.

Thanks in advance guys.

A:Faded Sticker... Help

Windows will be tied to the hardware
Vista is not free to upgrade to W10

if you have the recovery DVDs for the PC you may not need the Key
Also the recovery partition may still be working and you may be able to recovery using that

whats the make and exact model of the PC

2 more replies
Answer Match 41.16%

My TFT screen is faded. I can sometimes see some of the outlines but it is really bad. I've taken it apart and couldnt see any loose connections. . . any suggestions on what it might be>?

A:Faded TFT Screen

Sounds like a failed inverter or screen backlight.

1 more replies
Answer Match 41.16%


I just found this board, hope someone can help me. I bought a refurb Thinkpad 600e about 3 months ago and the LCD took a little time to get bright, it would start out orange when first turned on but looked fine within a few seconds.
Now the LCD can only very faintly can be seen, more like just a shadow, no color, black. It works fine with another monitor.
The cable to the LCD looks a little chewed, any thoughts?


A:Thinkpad LCD faded out

7 more replies
Answer Match 41.16%

I keep setting the background for my desktop and it keeps going back to the black screen. Any suggestions? As usual, all help is greatly appreciated.

A:Solved: faded

What system, XP, Vista or ???
More details needed

3 more replies
Answer Match 41.16%

I uploaded several hundred scanned photos to Picasa. No problems with editing and arranging. Now, two months, later the photos are there, but they are faded--both thumbnail and full-size. Would appreciate some advice.

A:Faded Photos

Very strange, no editor will fade your photos without being told to do so.

Are the originals which you hopefully have faded as well.

Did they look ok to begin with after the scan?

Sun light will fade photos, hard drives will not...

1 more replies
Answer Match 41.16%

Just turned on my laptop and my toolbar (at the bottom) is faded. Start shows Sta but not full letters, icons are bright, right side icons are virtually gone. Toolbar in Firefox is white with a blue border across the top.

I don't remember changing anything last night. Any clue how to figure out what happened and how to fix it?

A:Toolbar faded away

Run a full scan with Malwarebytes in Safe Mode if necessary, followed by your AV full scan. I'd also run a full scan with SUPERAntiSpyware - Downloads which digs out spyware that remains after uninstall in registry.

Then run SFC /SCANNOW Command.

If this doesn't repair it update your Display driver, seeing if a new one is provided by Windows Updates after enabling Automatically deliver drivers via Windows Update (Step 3)

You can also try System Restore to before the problem began, if necessary from System Recovery Options

If that fails, uninstall the display driver and reinstall it by restarting the PC.

2 more replies
Answer Match 41.16%

Can anyone please tell me why in the Program Files folder and in the Documents and Settings floder some of the sub-folders appear faded? What is doing that?

A:Faded-looking folders?

15 more replies
Answer Match 41.16%

I run win 7 64. My browser is FireFox. One day i started my my computer and texts were washed out. Most of the black and white text on my computer screen has faded. If there were a contrast adjustment I would fix it in a second. Let me say here that it is not my monitor. It has nothing to do with desktop settings. I have been through the posts and tried using all the suggestions. It is the same on FireFox and when fire fox is closed.

Dropdown menus are faded. My word processor texts are faded.On this page as i write this, all of the small black and white text such as, "Logged in as angster", "Use a title that describes your problem......." etc are faded.
All of the "Do Not capitalize" etc are faded. The text I am writing now is Not faded.
Can someone please help me?

A:faded text

try calibrating your color, go to control panel and search for color calibration

2 more replies
Answer Match 41.16%

My computer blue screened yesterday saying something about free space on the disk which didn't make sense cause i still have 50% space available. I restarted and it seemed like I had a virus, so I did a system restore to a couple days before. Ever since then a lot of icons/folders appear faded. I know this is because they are hidden but before this blue screen/restore happened the folders and icons that are now faded weren't. I have never seen one icon/folder on my computer that appeared faded or dimmed and now they are, so is there any way I can change this back?

A:Faded Icons

There's clearly something still wrong with your computer, and having multiple folders and files marked as Hidden is just another symptom. I would suggest posting a HijackThis log in the security forum.

2 more replies
Answer Match 41.16%

Google has a new video chat (webcam) plugin. I've been using my Logitech Fusion webcam with Windows Live Messenger, no problems. I downloaded the plugin and used the test window to check it. I appear as just a black screen, even though the plugin knows I have Logitech Fusion, it appears in the box under "camera". I am able to use the audio portion of the plugin, using my Logitech webcam, I can speak and hear perfectly. There's no picture. I tried Google's page on the new plugin, no trouble-shooting link. I tried phoning Logitech, the guy said he never heard of the plugin and has no idea if it will work, though the camera does work with Yahoo and AIM messengers. Sooo, have come to my one trusted source, when nobody knows, tech guys know! Please clue me in!!

More replies
Answer Match 41.16%

When I open any videos in any player; they all are running faded. so whats the problem and how can I see videos clearly.

A:faded all video

Is anything else faded? Or is it just videos? Are these downloaded videos? DVD's or Are they streaming videos? (ex) YouTube etc? Do you have a separate video card? or are you using the onboard VGA? Have you updated your video driver?
Have you updated adobe flashplayer, shockwave, and java?
Have you tried a different monitor?

1 more replies
Answer Match 41.16%

When I type on the computer, some of the letters showup on the monitor blurry. This just started today. What could be causing this? Thanks... Liz

A:Letters are Faded

6 more replies
Answer Match 41.16%

So my notebook is an HP dv4 bought less than a year ago and the COA Product ID is only half visible, and as a precaution I spoke with some HP reps and they told me to download keyfinder and run it to find my Win7 Product key. I found the key, but I noticed that its different from the COA label(atleast the last 15 characters that were visible), which Product Key is the correct one? Will the one I found with keyfinder work for future restores?

A:Windows 7 COA faded

Welcome to the forum,

I'm not sure which one you used but this Belarc Advisor - Free software downloads and software reviews - CNET

always works for me. See if it gives you the same one.

9 more replies
Answer Match 40.74%

Ive been given a laptop. It always stops on a faded Xp splash Screen ethier when started normally or by selecting last known good. If I try any of the safe mode options BSOD ocours.

This is some info Ive recorded from the BSOD:


0x000050 0x870000 x0000001 oxf72b8a12 0x000000

Xymb46.sys address F72B8A12 base at FZ28900 date stamp 48FC8198

The laptop is:

R61 8932-A19 win XP sp2 o/s

becase this is lanovo laptop I was Able to to see some error log by using system recovery. they wre 1030 and 1058

Please help

More replies
Answer Match 40.74%

Fujitsu CRT monitor has a suddenly "faded" display, as if the screen has been whitewashed. It's also slightly out of focus, and there's a tiny black dot in the middle. It's still usable (using it now to post this). Tried degaussing a couple of times, no result, though at one point it displayed properly for an instant during one degaussing. Any help appreciated.

More replies
Answer Match 40.74%

i have windows xp when screen comes up,some of the lettering is faded .it looks like it is low on ink, knowing it has nothing to do with ink.iam using it to try to show what iam looking at. i would appreciate some help thanks

A:some letters on screen are faded

7 more replies
Answer Match 40.74%

Is anyone familiar with what kind of hardware problem would cause the screen to appear light/faded for the first 30 seconds during bootup? After that, I get all kinds of misc weird errors, but I am sure it is hardware related.

memory, video card, and motherboard all check out.

Thanks in advance.

A:faded screen on boot

Have you tried a different monitor?

There are really only 2 things that can make the picture fade. Video card and monitor.

Get free stuff and help out a poor computer tech:
LarryCore begs for money

Vote for the best Tech Support site: VOTE for!

3 more replies
Answer Match 40.74%

I am trying to create a faint background image which fades into a white page color. The image is a rose and I will be placing text over the top of it.
I am using Fireworks as it will be a dynamic html page with mouse rollovers and hyperlink, etc...
I am making the rose image around 20% transperant and then adding feathering but this produces a really poor quality image, is there a better way ?
I dont have photoshop.


A:Faded Background quality

7 more replies
Answer Match 40.74%

Hi...My beloved Acer M1600 Desktop with Windows XP SP3 OS just went bad ...not suddenly but in steps til all I have is a black monitor screen so I would not have a clue what the problem could be anything.... I can switch the power on and the fan goes....the monitor that had a bright yellow light switches to a basicly very dim flickering light....I just established that the Graphics Card fan is going .......and I tried F8 on startup but nothing....Lately I have had a problem with my cat dancing on the keyboard but she is deaf and takes no notice of my howls of frustration.....So this one has got me stumped....
However Prior to the black screen ...I recall I was having big problems with Firefox and Chrome ...both started crashing as soon as I tried to load in a web site...later both would not open at all.....I recall rebooting and I had my normal screen with my shortcuts then later I had no shortcuts just my screen picture and then later again the black screen

Could anybody please offer any suggestions ....Could it be a Virus?? Thanks for any info ....MK

A:Acer M1600 just faded away?

I think it would be worth seeing if it will run another OS booting from the DVD

do you have another PC that works and has a DVD writer - you could then create a UBUNTU DVD to run from the machine
that will see if there is a hardware issue at all ?
or if its a windows or harddrive issue

Do you have a set of recovery DVDs ?

quite a long post of instructions here

UBUNTU Stand Alone DVD

Note the latest version of UBUNTU needs a DVD to use and boot from

if you only have CDs then you can use an older version, version 10 or 11 from this archive list

It may be possible to boot from another Operating System
This will at least test the Hardware and also see if you can see the Harddrive and possibly get any of your data off.

If you have another PC with a DVDwriter and spare DVD
Download the ISO

UBUNTU version 14
For almost all PCs. The following ISO 32Bit image will work on most machines with Intel/AMD/etc type processors and almost all computers that run Microsoft Windows, as well as newer Apple Macintosh systems based on Intel processors.

You can also run from a USB device now - if the Machine supports booting off a USB Stick Read more

14 more replies
Answer Match 40.74%

I have a movie that won't play any sound!!! when played in windows media it attemps to download codecs,,I assume for sound cuz I got all the mpeg4 and divx codec's... when you look at the icon in explorer it looks faded as if I had cut the file and was gonna paste it was extracted from .rar files my questions are
1. do I need a new codec??
2. why does the file look faded?? can i find out what format or codec the sound was encoded in??

A:faded media file


You could try the WMP codecs:

Also, does it ever actually download the codecs, or do you get an error?

To find out what it could be, all you can really do is rightclick and choose Properties.



1 more replies
Answer Match 40.74%

At an 'Open with' why would the checkbox to 'Always use the selected program to open this kind of file' be faded?

A:Faded checkbox at 'Open with'?

Hello Advice Pro,

What type of file is this for, and method did you use to get to the "Open with" window? If through Default Programs, then that is normal.

Open With - Change Default Program

Hope this helps for now,

1 more replies
Answer Match 40.74%

I have searched to find an answer to this problem of faded pictures when printed from windows photo gallery. I have seen a few others having the same problem, but no solutions. I am hoping that someone now can help.

I can print pictures from other software on my computer, from the internet, etc, with great photo quality. When I print from Windows photo gallery they are very light and faded looking. I have made sure the adjustments are for my printer.

It seems that most of the people experiencing this problem had canon printers. Does anyone have a solution to this?


A:faded printed pictures

I have found the solution to this problem, you need to untick the checkbox for "borderless printing", this is how to do it:


When you click print, go to Options > Printer Properties

Click on the "Page Setup" tab, then Untick the box that says "Borderless Printing"

I love Myriam the little bunny

1 more replies
Answer Match 40.74%


No matter what I do so far, my Compaq printer prints with alternating light and dark bands running horizontally. I've cleaned and done just about everything suggested by tech supp and the user's guide.

While viewing printer's system info I noticed there are i's in blue circles. Hopefully this means information. One thing I haven't checked is the cable. Printer is IJ600

Any suggestions besides getting rid of this printer.


More replies
Answer Match 40.74%

Greeting. I've been experiencing an issue, and I finally wanted to ask about it.
Thing is: Sometimes (typically "arrow" shapes) have a "fade" effect on their sides. I'd give an example of a popular website that shows these issues, but now that I'm looking for one I can't find any. (Typical, huh?)
Well I recently tried WaniKani and it's very pronounced there. I made a screenshot comparing it with IE. What I use there is WaterFox (my learning browser) which is basically FireFox, my main browser is PaleMoon, which is basically also FireFox and It has the same Issues. Only addon I use is adblock, plugin-wise I have the usual: Flash, Java, VLC.
Any Ideas what it could be, and how I could fix it?

More replies
Answer Match 40.74%


After doing this tweak with Microsoft's Win XP Tweak UI (Remove Shortcut Arrows: Explorer > Shortcut > Checked the NONE box) all my desktop and tray icons as well as all icons inside the program have faded and some are blurred. I tried to undo that by clicking on Repair > Rebuild icons; however, it didn't work.

How do I fix this annoying little problem?

Thanks in advance,


A:All Windows Xp's icons have faded

Run a System Restore to a date before you changed the icons.

1 more replies
Answer Match 40.74%

I know it is possible to change the appearance of text on Vista, I believe it is called clear?

I only suffer feint text (looks like ink is running out on printed paper) on certain things ie. The Spybot home page or some windows when down loading stuff from the net.

Is there a tweak that brings ALL text up clean and clear?


A:Only some text has faded appearance.

Hello Alan,

You can check the usual items listed below to see if they may be able to help with this:
Make sure that you are using the native screen resolution for your monitor.Check to see if you can use a higher screen refresh rate.Try the different ClearType settings to see if one looks better.Check the program to see if it has it's own font settings that can be adjusted.
Hope this helps,

5 more replies
Answer Match 40.74%

I search and have found nothing related to my problem. My PC starts fine but after a few seconds the taskbar dims. Whats wrong?

XP Pro
version 2002

Thank you in advance for all your help.

A:Taskbar is faded or dimmed...

That is odd, but it appears that the Firefox status bar is transparent and is on top of the taskbar. Is your taskbar's "keep on top of other windows" option on?

15 more replies
Answer Match 40.74%

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 8078 Mb
Graphics Card: Intel(R) HD Graphics, -1984 Mb
Hard Drives: C: Total - 466937 MB, Free - 402546 MB;
Motherboard: Gigabyte Technology Co., Ltd., H77N-WIFI
Antivirus: Kaspersky Anti-Virus, Updated and Enabled

I have noticed that some web sites have so little contrast in their text that it is practically unreadable. Why is this so or is it my computer?

A:Solved: Faded text.

14 more replies
Answer Match 40.74%

Hey all,

New member here, and very happy to be here. Several weeks back I got a virus, got rid of it (at least I think so) but when restored my Toshiba, some of the icons on my desktop, documents, video, and music were faded. Can this be fixed?? Thanks a million everyone!!

A:HELP!! Icons faded on my toshiba!!!

It will be better if you post screenshot here from that icons.
Screenshots and Files - Upload and Post in Seven Forums

9 more replies
Answer Match 40.74%

Ok we have a HP 4600 color laserjet which prints the right side of the pages faded. Now, on the right half of each printout, no matter what colours are there, its allways the yellow that is faded on the right side, other colors on the right side are ok. And on the left side ALL colours are ok including yellow.

Any ideas on what maybe casing this?


A:Right-side of print faded?

On B/W lasers it means the toner is running low on one side of the cartridge, so you take it out (the cartridge) and shake it a bit to distribute the remaining toner evenly.

5 more replies
Answer Match 40.74%

I am using Vista on a Toshiba Laptop P-206. I have a large music collection. When I open the the folder, it's a faded yellow. All the sub folders but two, are faded. I went to Folder Options and made sure they were not hidden. I changed the names of the folders, but they're still faded. Help!

A:Faded Folder Colors

check your permissions for the folders

3 more replies
Answer Match 40.74%

Hi! I'm really new to all of this! I'm taking an internet course and this is one of my lessons. I really am having problems with my screen freezing up and fading or turning blue (if that,s what you call it)! Help! Windows Vista

A:blue or faded screen

Do you mean that your screen turns blue with white text on it?

2 more replies
Answer Match 40.74%


I recently installed Windows 8. However, the customization options in "Change PC Settings" are all faded out and I'm unable to click any of the colours/pictures.

I'm wondering what I'm doing wrong, and if there's a possible solution?

Thanks for any help.

A:Customization options faded out.

Does it say something about needing to activate your copy of Windows 8? You may need to check and make sure you're activated.

2 more replies
Answer Match 40.74%

Both my daughter and I have a problem with keyboards in that the letters fade really quickly. This isn't such a problem with a desktop, but is an issue on a laptop. Apart from naming the condition "Acid Sweat Syndrome" ( ***), has anyone else had this problem and found a solution about how to replace the letters? Tippex comes straight off. Please don't say learn to touch type!

A:Laptop keyboard faded

Sorry for posting twice. Thought the first post had failed...

2 more replies
Answer Match 40.74%

Please could one of you give me a valid PosReady 2009 product key as the one Microsoft provided me with was invalid according to the installer.

More replies
Answer Match 40.32%

windows 7 only shows very faint text and pictures on the internet on new laptop,does it come like that and you have to alter the brightness or is there a problem,this is the same on 2 laptops i had,both have been returned,it happened on both internet and cd based stuff? any one have any ideas

A:windows 7 faded pictures and text

Clear type needs to be activated probably.

1 more replies
Answer Match 40.32%

Recently my computer was hacked (I guess you could say) by Anti-Virus Gold and thanks to your guys' tutorial, I was able to delete it. But I'm still having some problems that might or might not be related. *shrug* Anyway...

1) When I go to change my desktop wallpaper, I click on browse and click on the file I want to open...and nothing happens. And there are also fewer wallpapers to choose from from the list. I can't figure out what the problem is. And I have changed my wallpaper thousands of times and I've never had this problem. It's really bugging me!!!

2) When I go to My Computer and view my thumbnail files, some are faded. It's really weird. This started happening when my computer was hacked.

3) This is kind of minor, but when I log onto my computer, Internet Explorer pops up for some reason. Again, it never did before. Oh, and the buttons on IE changed w/out me actually doing anything. *sigh*

So, can anyone help me? This spyware junk has really messed up my compy and it really pisses me off!

Thanks for the help...

A:Desktop Wallpaper, Faded Folders, Ugh!

Hi I know not much help, but prehaps a complete reinstall is called for, or try reinstalling your systems disk that came with the motherboard.

1 more replies
Answer Match 40.32%

I find that Windows Live Mail messages are so faded that they are unpleasant to read. I have changed setting in Windows 7 Display but it hasn't helped that much.

I also forewarded the message to myself and changed the font and boldface before clicking (send). This works but it is time consuming and seems very unnecessary.

Is WLM working on this problem. The unread messages are nice and boldfaced and that's what I want all my emails to look like.

A:Faded Look of Windows Live Mail

There are no such problems reported involving Live Mail 2011.

Follow instructions, but click on "Read" tab -

Regards. . .



3 more replies
Answer Match 40.32%

For the past few days, I've been noticing system freezes. I eventually tracked them to sysfader.exe jamming up. I know that Sysfader itself isn't malware, but extensive Googling notes that it acting up often corresponds with spyware or trojans. I've run cwshredder, Spybot, McAfee, and Trend Micro's programs, adjusted a tricky printer file, and have disabled a couple IE7 add-ons; that seems to have done the trick. I want to make sure, though, that my laptop is safe.Thanks very much in advance for any help.Logfile of HijackThis v1.99.1Scan saved at 12:07:47 AM, on 11/25/2006Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.5730.0011)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\System32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\LEXBCES.EXEC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Sony\HotKey Utility\HKserv.exeC:\Program Files\Sony\VAIO Power Management\SPMgr.exeC:\WINDOWS\System32\ezSP_Px.exeC:\Program Files\\VSO\mcvsshld.exeC:\PROGRA~1\\agent\mcagent.exeC:\P... Read more

A:Just Checking If Sysfader Problems Have Faded

Hi,I can't see anything suspicious here though..One important remark..Your Java is out of date. Older versions have vulnerabilities that malware can use to infect your system. Please follow these steps to remove older version Java components and update.Updating Java:Download the latest version of Java Runtime Environment (JRE) 5.0 Update 9.Scroll down to where it says "The J2SE Runtime Environment (JRE) allows end-users to run Java applications".Click the "Download" button to the right.Check the box that says: "Accept License Agreement".The page will refresh.Click on the link to download Windows Offline Installation with or without Multi-language and save to your desktop.Close any programs you may have running - especially your web browser.Go to Start > Control Panel double-click on Add/Remove programs and remove all older versions of Java.Check any item with Java Runtime Environment (JRE or J2SE) in the name. It should have the icon next to it.Click the Remove or Change/Remove button.Repeat as many times as necessary to remove each Java versions.Reboot your computer once all Java components are removed.Then from your desktop double-click on jre-1_5_0_09-windowsi586-p.exe to install the newest version.

2 more replies
Answer Match 40.32%

My BenQ T905 monitor (cabled as an auxiliary monitor to my Mac PowerBook G4 laptop) worked fine for about a year (purchased Nov. 05). Then several months ago, I noticed it was flashing a few times when booting up. Nothing else was problematic, so I assumed it was a minor glitch.

Today, with my Macintosh Powerbook powered up for several hours, suddenly my BenQ monitor dimmed and the light started sort of draining down and away. The whole thing went black and, as it did, I heard a small pop come from somewhere in back of it.

I turned it off, then back on. When I do, I see the "BenQ" logo for a split second before it goes to solid black again. Is my monitor fried? Or is there something I can try to coax it back to life?

A:BenQ T905 faded to black

Is it still under any kind of warranty? I doubt it, but you gotta ask.

Can you see anything if you shine a flashlight at the screen and look very close?
If the backlight burned out the screen will still work, but it will be almost impossible to see.

2 more replies
Answer Match 40.32%

Issue Example:
Monitor: eMachines e15t4

So my issue is like the image I posted above - I have faded blackish lines moving all over the screen (kind of a fuzziness). It will gradually change as I change the monitor refresh rate, however it's always there. I have noticed, I can only see it in windows; if I'm in bios, It's not active. I can not try another monitor because I have no other monitor.

Any help would be greatly appreciated.
Thank you

A:Fuzzy Faded Lines on Monitor

Welcome to Seven Forums ddbillsfan. If you pull up the monitors own menu (for adjustments), is the problem showing in the monitors menu as well, or is it behind the menu? A Guy

5 more replies
Answer Match 40.32%

Please take a look at the pic above. Notice how my start menu as well as all my icons on the bottom right are all faded and theres lines going through them etc. I have no idea how this happened, and I have no idea how to fix it either. Please help.

PS: You can rule out the monitor being a problem immediately because i've tried different monitors. Also, the problem only exists on anything that is windows xp. Games, browser screens etc all look fine. My desktop backround as you can see...fine. Any help is much appreciated.

A:XP menus colors faded/lines

16 more replies
Answer Match 40.32%

Hi guys, I installed SP1 on my vista home premium last night and it was all good but this morning I noticed that the battery power, internet icon and the volume icon had disappeared from the system tray. I had a look in control panel and found that the option to enable them was faded out. Is there a way I can fix this? I like to change the volume easily and see how much power I have left.
Screenshot of faded out tick boxes:

A:Taskbar system icons faded out

Try rebooting. I had this happen as well and after I rebooted, they were back.

1 more replies
Answer Match 40.32%

I had to reinstall Vista, because of lots of errors. After I did that, and wanted to log in, it asked for the activation code. (So basicly, and can't log in before I have it).

But the thing is the activasion code is underneath my laptop, and it has faded away now! I can't see any of the digits. What on earth can I do?

There's another 8 number code that I still can see. Maybe I can use that to proove my certificate?

A:The Vista activation code has faded away!

To be quite fair im not sure what you can do, i guess you can just try MS and see what they say

hope you get this sorted

6 more replies
Answer Match 40.32%

hello. having problems with LCD montior. It is a quality monitor--NEC Multisync LCD 1830--but is about 5 years old.

For a week or so it was flickingering slightly. Then one day it faded to black for a minute, came back for 30 seconds, then went black for a long time. On subsequent days I tried it, no luck. Then one day I tried it again and it worked for a few minutes before fading to black again. When it works for brief periods, the image quality is perfect. But at any time it is liable to go totally black again.

Might it be at the end of its lifespan? Can anyone tell me the normal lifespan for LCD's?

Are they worth repairing, in general?

Note: i am quite sure the problem is with the monitor, not the CPU or anything else. i hooked up another monitor and it has been working perfectly for days.

A:Solved: LCD monitor has faded to black

Your LCD is history as in either or backlight,inverter and no it is not worth having fixed. Buy a new one.

3 more replies
Answer Match 40.32%

I have searched all the keywords I can think of & I can't seem to find this problem addressed anywhere. The type on my address toolbar in the taskbar is very faded. Almost like it's grayed out, but not quite. I had it do this when I first installed Win 8.1, messed with some settings, but none that seemed to make any sense & it went away. Now it's back & I haven't done any setting changes! Has anyone seen this before & can help?!


A:Faded Address Toolbar Type

Check if high contrast mode is on:

Press Winkey-q and arrow down to Settings. Then type in the search line the word contrast.
You should get a hit "turn high contrast mode on or off" or words to that effect. Click it to check the setting.

3 more replies
Answer Match 40.32%

My HP pavilion dv4t-1500 laptop with a 500GB hard disk died. I bought a new 256 GB SSD to replace it. If I order the HP recovery disks, they will most likely not work as the new hard drive size is different (as the HP forums say)

Also I have read in forums that I can use the COA product key to install a fresh copy of windows 7. However 6 characters of the product key is faded

If the recovery disks will not work, will microsoft provide me with the original COA product key so that I could do a fresh install?

I have bought an expensive SSD and I really do not want to be faced with the prospect of having to buy a new windows license!!

A:Hard Disk Crashed, New SSD and Faded COA

Try Speccy : Speccy - Download

It'll give you the key. Look under operating system.

Theres many fine tutorials here to use when you transfer/reinstall to your new ssd. I know..... I used them myself!

9 more replies
Answer Match 40.32%


A few days back, my computer became infected with a virus, and after finally being able to remove it, I find that the folder "My Documents" is faded out (which means that it is partially transparent) as well as the "Shared Documents." Moreover, all of my files in "My Documents" are simply gone, but when I go to "Recent History" (say, in Microsoft Word), the files are still there and alive and well. So what's going on here and what can be done about this?

A:[SOLVED] Why Are My Files and Folders Faded Out?

Sounds like the files were marked as hidden. You can right-click on one and select Properties to check the current file attribute settings.

3 more replies
Answer Match 40.32%

i have an HP pavilion laptop with windows vista. everytime i turn the computer on, I can barely see the desktop. it is tainted, faded, and really black.
Does anyone know how to fix it, what can it be? thanks.

A:Screen does not show anything? faded pictures

Is any light coming from the screen at all. A failed backlight would cause an almost invisible black image.

2 more replies
Answer Match 40.32%

Internet Option, Homepage is faded out so I can not type in a homepage or use current homepage tab.  I think maybe somewhere there is a setting that is turned off.  Any ideas would be appreciated.  Thank you! 

A:Internet Option, Homepage is faded

Do you have any security/anti-malware and adware scanners set to prevent changing your homepage?That would be the first thing I would check.

2 more replies
Answer Match 40.32%

I'm trying to make old, faded genealogical documents readable using CHEAP methods. (i.e. I'm a teacher and I'm poor.) Based on my online research, IR and UV imaging might be useful depending on the type of ink used. I know that digital cameras can't see much in the UV part of the spectrum. Does the IR cutoff filter on the imaging sensor mean my EasyShare DX4900 is useless for this as well?

A:digital imaging of old, faded documents


I'll see what I can find to help you but...

Dr EBob said:

I'm trying to make old, faded genealogical documents readable using CHEAP methods. (i.e. I'm a teacher and I'm poor.) Click to expand...

you must not teach in my would be able to by the best state of the art equipment and have only three kids/rats in your class...


2 more replies
Answer Match 40.32%

I picked up this lenovo laptop and shortly after I got it the HDD went out. I replaced the HDD and Installed a full version of Windows XP SP2 then used the Win 7 upgrade disc I bought. I did a clean install of the Win 7 then I activated it at that time without any issues. Some time after that I started getting the message it wasn't a genuine copy. I rearmed the time period but I'm not able to activate the copy again with the PID. I get the message this product is for upgrade and not a clean install. I need to find out if I will be able to register this copy or if I will need to start over from scratch. I did try putting in another PID but it didn't activate with it. I haven't been able to change the PID back due to the message I am getting about the upgrade not clean install.

I appreciate any help I can get with this issue.


Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-GJY49-VJBQ7-HYRR2
Windows Product Key Hash: W5/6nm6F2UPXrCkY5xUhXb/+21g=
Windows Product ID: 00426-OEM-8992662-00006
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {B7CDA3F9-04BA-4675-9B81-E8C61611D67C}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Ultimate
Architecture: 0x00000009
... Read more

A:Product key giving product is upgrade not clean install on activation

Windows Product ID: 00426-OEM-8992662-00006
Thats an Acer OEM. You cannot install it on a Lenova.

9 more replies
Answer Match 39.9%

I recently purchased a Precision M6800 (probably one of the last ) and now want to add an external slice-type battery. I did some searches on DELL web sites (my local Belgium one and some international ones) and on the www. This resulted in several product codes for what seem to be the same, or at least similar products: 451-11831 / 451-BBGJ / 312-1351. Can anyone tell me if those are all the same, or at least compatible products ? And more importantly: is any of those (or all 3) really the slice-type battery I am looking for to attach to the docking connector of my M6800 ?
Erik "De LoRRe" Laurent

More replies
Answer Match 39.9%

So short story, I work at a college tech site that fixes student and faculty computers. A foreign exchange student from Japan with a Sony Vaio (most likely from Japan as well) managed to get a virus on his computer and he was blocked off our network. Our policy is that we wipe and reinstall the OS to ensure that the virus is gone. However, we didn't have any Windows 7 Home Prem media CDs so I downloaded a Win7 Home Prem 32bit iso off of MSDN and burnt it to disk. However, when entering the product key given on the bottom of the laptop(and I've checked 3 times now to make sure it's correct), I get a:

"Product key does not match the current Windows SKU" error.

Why is this happening? Do I need a certain burnt iso (from Sony in Japan?) because of the laptop's foreign origins or is something else causing the problem here?

A:Product Key Does Not Match Current Windows SKU (Foreign product key?)

Yes, you need a Japanese iso, they have regional editions.

1 more replies
Answer Match 39.9%

I am making a recovery disk for my dell latitude E6440 laptop and began the process to make a Windows 7 professional DVD.  However, the Product Key I found on the computer only has 20 characters and on the Windows download site I received an error,
saying I needed 25 characters.
Not sure where I go from here.  Dell said the Windows 7 professional Product ID was correct.

More replies
Answer Match 39.9%


I have a Brother 6050D Laser printer, which has started several faded vertical bands, these are especially bad when printing black areas, and less noticeable when printing ordinary text. I have changed the toner cartridge and the drum unit. but I am still getting these bands. Does any one have any ideas on how to get rid of them.

The following link shows a photo of how a page looks when printed using the printer

Yours - Antony

More replies
Answer Match 39.9%

Last night when I was plugging in my ipod to my Toshiba Satellite laptop, a 1.5 inch or so verticle stripe appeared on my screen. Is this a portion of the LCD just getting old? Malfunctioning? Is it fixable?

The laptop is about 5 or 6 years old. Any ideas what may have caused this?


A:Faded 1 inch stripe on laptop screen

16 more replies
Answer Match 39.9%

I have formatted my laptop, the problem was that I delete all partitions and done a full reinstallation.

The problem is that now I cannot input the OS product key to activate it. I have tried to read the product key and got around 3/4 of the key.

Is there any way to get my product key back? From either sending HP my s/n and p/n serial numbers or contacting Microsoft.


A:Windows Vista CEMact HP faded and unreadble

This is how to find the phone number for Microsoft How to find a phone number for a Microsoft Product Activation Center

7 more replies
Answer Match 39.9%

It seems like I post here at least 100 times a day becasue of all of the problems I have, , but the thing is whenever I right click with my mouse the options are always faded and you can only see like 50% of them until you rollver them. And then after I click the option the option just like stays there. The only way to get it off is to right click on the wallpaper of my laptop and click somewhere else on the screen. Here are some shots:

During Click: As you can tell you can barely see the menu

After Click: As you can tell it sticks to the like computer and is over everything when I open up a program

If you need a full desktop screen let me know


A:Mouse Right Click Options Faded/Stick

Have you triend uninstalling and reinstalling your graphics card drivers? Sounds like it's defo a graphicval issue :)


4 more replies
Answer Match 39.9%

Hello. So I'm an art student and I use my laptop but the colors are extremely cold/washed out and blue-ish compared to my iphone or my old Hp pavillion G windows 7 laptop, It's as if the vibrance or saturation is extremely low. I've tried so many ways to fix this, I've tried; Messing with the display calibrationsMessing with the brightness and contrastUpdating/Reinstalling my display adapter (Intel R HD graphics 5500)Updating my bios I even sent my laptop in for repair and just received it back today and the issue was not resolved (CSO #: BHXY366501) Is there any way to fix this or is this just how the laptop was made to look??   

More replies
Answer Match 39.9%

Hi everyone

I think that this is a popular error among win users. turned on the laptop to find not genuine message

I have used many key extractors to no avail.

The unfortunate thing is that my COA sticker is faded.

I have some registry backups, backup files, and toshiba hdd recovery files but i dont know if its possible to extract the key

have run malwarebytes in safemode to find monetizer and tarma PUPs

A:Windows not genuine Error-COA sticker faded

Please post an MGADiag report - without that, we're just guessing in a data-vacuum.

Please follow this tutorial and post an MGADiag report - then we can see what the problem is.

Ignore errors produced when clicking on the Copy button - they simply mean that the tool could not create the backup files for some reason. The data is still copied to the clipboard for pasting to your response.

Please also state the Version and Edition of Windows quoted on your COA sticker (if you have one) on the case of your machine (or inside the battery compartment), but do NOT quote the Key on the sticker!

9 more replies
Answer Match 39.9%

I have spilled water on my laptop keyboard(Lenovo Thinkpad Z60m), and attempted to dry it out and then the picture clouded over black. I dried it with a hairdryer a bit and rebooted it and now the picture is there but extremely faded, mostly black, yet the operations of the computer are all wroking fine.
What has been damaged? Will leaving it to dry longer help or is it something that is going to need to be replaced.
Thanks in advance.

A:Spilled Water on laptop, Picture faded

14 more replies
Answer Match 39.9%

11JUL11 - Windows7Professional - 3 days ago my PC was attacked by Cybot.B which took 6 hours to remove. Afterwards, most of the Windows Icons, all my work file folders and Word, Excel PPT etc file icons were faded. Thanks to advice from this forum, I selected my "Apps" Folder, above My Documents, in Windows Explorer, then TOOLS, Options, General, and unticked HIDDEN. This unfaded ALL the icons on my PC.

Cybot.B came via a "Business Expansion" Site on Google, created the BLUE SCREEN of DEATH and an Anti-Virus Screen "Personal Shield Pro" and ran an unbreakable recursive cycle - "Continue without Protection?". Eventually after restarting in SAFE MODE several times, I could run Windows Defender (luckily available as it was pinned to Task Bar) and after the 5th clean up with Defender - the PC re-booted normally. But I am still finding virus effects - one being that on updating my website from folder Index_Files, it updates with a different Folder name - and the uploaded file reports "faulty" on the internet. I am about to run Microsoft Security Essentials for the 3rd time - it seems to find all the glitches.

A:Hundreds of ICONS are faded - Cybot.B attack

Welcome Matterofgravity to the windows 7 forums.

You seem to have gotten a real bad one BUT, this is even one more reason to make an image backup of your hard disk. They say the most important 3 things in computers are BACKUP BACKUP BACKUP.
Outside of a complete re-install of windows, what your doing is probably the best remedy outside of restoring your windows image.


6 more replies
Answer Match 39.9%

I have a maxtech(i know) 19' lcd that has a white ghostlike area around the edge of the screen that goes away after it is on for about 30m-1hr. The monitor is over 3 yrs old. Anyone know why it does this? Is it going bad?

A:White 'faded area' around edge of lcd monitor

Offhand? Given the age; I would first think that the fluorescent tube light used to backlight the screen is beginning to go bad. It starts off a little to dim with the edges worst, just like a fluorescent tube in a ceiling light. Once warmed up it reaches full brightness .
This is fixable, the bulbs are designed to be replaced .

But if it is something more complex like the internal electronics the monitor may be on the way to the junk pile.

1 more replies
Answer Match 39.9%

I have photographs that were printed on paper. The photos date back to 1948 - 1950. The photos are black and white. However, the photos are faded out or did not print well on the original printing. How can I digitally enhance the photos so the faded out parts are made less severe? I have two scanners, MS Paint. Thank you in advance for your reply.

A:How do I enhance a faded paper copy of a photograph?

6 more replies
Answer Match 39.9%

I'm trying to create an image in Illustrator 9.0 and Photoshop 6.0 that will be used to print a t-shirt for a camp. I would like to give the image a "faded look" to make the shirt look a little more trendy (as that is the fad right now). When I say faded...i don't mean just lighter...i mean that I want it to kind of look like some of the image has faded in parts but is darker in others. (It's hard to explain...but if you've seen a shirt from American Eagle or Abercrombie, you probably know what I mean)

Is there an easy way to make this work, or is there a plugin or filter that I could download somewhere for free to create this effect? Any help would be GREATLY appreciated!!


A:Faded Effect/Filter for Illustrator or Photoshop

here's 2 sites i use for Photoshop help:
web design studio for specific techniques and
about... for basics

3 more replies
Answer Match 39.9%

I have a Dell 968 printer. I'm coming here for support because you guys will probably be more helpful than them.

The problem is that all pages are coming out with faded, incorrect or 'striped' (on the alignment test sheet it isn't a full thick block) colours. I have replaced both the colour and black cartridges multiple times, but the problem still persists.

For example, here is a picture I tried to print. Here is a scanned copy of the result. Here is also a scanned copy of the alignment page (upside down, I just realised) - taken just after fresh cartridges were put in.

Any help with this would be greatly appreciated.


A:Dell printer - faded/murky colours

It looks like the drivers are confused or something. That's the only thing I can think of (other than hardware failure) that would cause a printer not to print correctly. I'd attempt to update/reinstall your drivers. If that doesn't help, try using the printer on another computer with a fresh driver installation. If it still happens on the other computer then it's probably a hardware failure. You could try having it repaired but you're better off getting a replacement.

You might also want to try the customer service line. Granted they take forever but they've probably seen this issue before and can tie it to a specific problem.

2 more replies
Answer Match 39.9%

Hello. This is my first post on these forums.

Getting to the point, I have a Panasonic TV which I have been using as a Secondary Monitor for the past few months, and it has worked perfectly (with an S-video cable). One day I was using it for general reasons and the screen faded to black, and I knew it was on standby. Problem is, I tried everything, but it seemed to stay on standby no matter what. I have tried reconnecting the S-video cable to many places both on PC and Monitor, still same result.

I am using AV3 on the monitor, and am using the Operating System Windows Vista Home Premium 32 bit.

UltraMon doesn't seem to be helping in any way with it, and yes, the monitor is enabled in Display Settings.

I honestly have no idea at all why it just went black one day, other things such as my Xbox and normal TV viewing works perfectly on my Panasonic TV.

A:Secondary Monitor faded and won't work again (Panasonic)

Oh great. It still doesn't work.

Hey Panasonic, make a monitor which can be taken out of standby.

1 more replies
Answer Match 39.9%

My computer died so we have reinstalled Windows only problem is though is the activation code that
comes with the computer has faded off and the stickers all kinda weird.

Microsoft have told me to ask toshiba if they can track which activation code was for my computer (I think it registered the computer serial info when I first got it). I can't find a way to ask Toshiba unfortunately.

Help? I can't afford to buy it again. I already paid as part of the computer cost.

A:Re: I need to activate Windows but my code sticker has faded


> I can't afford to buy it again. I already paid as part of the computer cost.
You are right about that. Toshiba offers notebook with preinstalled operating system and when you buy notebook you pay for hardware, preinstalled software and valid licence for this preinstalled OS.
Please note this product key belongs to preinstalled OS version and it is not some kind of ?universal? key that you can use for activation if you use own OS version.

When you buy new notebook recovery image is saved on HDD as backup. This allows notebook owner to reinstall original recovery image ans start to use notebook with ?factory settings? again.
In case that HDD is defective or owner hat installed own OS version this recovery image will not be usable anymore.

To avoid this situation Toshiba has preinstalled small ?Toshiba recovery media creator? to allow notebook owner to create recovery media as DVD or USB and make recovery image back-up.
This recovery media is bootable device and recovery image can be installed without any problem.

If you check user?s manuals document that you got with your notebook you will see that the whole theme is described there. With other words every notebook owner is informed about all this.
Due to all these reasons recovery media creation is very important.

Back to your problem: after reading your posting I don't know what is your problem exactly and I don't know if HDD is defective but I presume you didn?t create this recovery media, ri... Read more

1 more replies
Answer Match 39.48%

I have just set up a wired home network, and share printers. I am printing to Epson RX580 on the network, however the text is faded and unreadable. Does anyone know why this is happening.

A:Wired Network Printer, text is faded and unreadable

Doesn't sounds like a network issue, more like a hardware issue with the machine.

2 more replies
Answer Match 39.48%

My Hp notebook screen is shaking with lines and faded colours. Is still under warranty. How do i go about it for replacement or repairs. Eddy

More replies
Answer Match 39.48%

Hello all,

I have had a consistent problem with XP PROFESSIONAL with a lock up at the splash screen when my computer is booting up (faded XP logo). This happens 4-5 times out of 10 when I boot my computer.

My PC specs, IRQ connections screenshot, PCI Latency Tool screenshot, and HiJackThis log are all provided below. Any help would be much appreciated.
//Microsoft Windows XP Professional SP3
//Intel Core 2 Quad CPU
//Q6600 @ 2.40 GHZ
//2.40 GHz, 2.00 GB of RAM
//ASUS P5K SE LGA 775 Intel P35 ATX Intel Motherboard
//Radeon X1650PRO 256MB 128-bit GDDR2 PCI Express x16
//CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500)
//Seagate Barracuda 7200
//E-MU 1820

HiJack This
Logfile of HijackThis v1.99.1
Scan saved at 8:50:13 PM, on 9/8/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.20861)

Running processes:
C:\Program Files\Viewpoint\Common\ViewpointService.exe
C:\Program Files\Creative Professional\E-MU PatchMix DSP\EmuPMixDSP.exe
C:\Program Files\Winamp\wina... Read more

More replies
Answer Match 39.48%

Here I captured some printscreens. The first is a GIF (, the second is a YouTube video:

A:Videos' and Gifs' right side faded in Microsoft Edge. Why?

Probably need to reinstall or update your video card drivers. What computer or graphics card do you have?

8 more replies
Answer Match 39.48%

I just got a LG L226WTQ 22" monitor. Some letters will have faded areas on them and also the screen saver will lock up the computer up solid, so I have it off (blank setting) right now. I have a Dell XPS 400 running windows xp. Any suggestions, I have a week and a half before I can not take it back. Thanks

More replies
Answer Match 39.48%

So I am having this really annoying issue. After the latest Windows 10 update whenever I open any games (I've tried heroes of the storm, Dota 2, and fallout 4) the color is darker, faded and greyed out. When a game starts, there is double vision and splotches of colors everywhere which makes things unplayable. If it helps, I have the nVidia 970 graphics card but this has only been happening since the latest Windows 10 update. I was hoping someone knew what I could do to fix this.

A:In-game colors faded and greyed out after latest update

I hope this helps you ...

1 more replies
Answer Match 39.48%

The text on my desktop icons are now faded after installing the dreamscene hack. Anyone know how to fix this?

A:Desktop Icon text are faded and barely legible

Same problem here

3 more replies
Answer Match 39.48%

Hoping someone can help me with a problem i am having with pc operating windows 7. Some of the webpages i vist "Windows Live Mail" the pages appear to be faded and washed out. I am unable to read the text..

pleas help!

A:pleas help: faded and washed out. I am unable to read the text..

Hi roffern, set your dislay to Windows Classic, the play with the Windows Colour and Appearance. To get access, right cclick on desktop > properties.

3 more replies
Answer Match 39.48%

hi ,
i have 2 identical hp w2007 flat screen monitors. they are both installed on
identical gateway 3 yr old PC's with xp. one monitor is upstairs, and mine is downstairs. mine works perfectly .. they one upstairs.. lets call it monitor 1,
has developed a bright or washed out , bright horizontal line about 4" tall-going across the entire screen.
... along with this problem it doesn't have true black ,(more of a black brown faded) on all black screens...
Mine , monitor 2, is perfect.
monitor 1, started having issues ,with not holding, a preferred setting.. it wouldn't hold resolution, size or brightness , contrast and other settings.. i have uninstalled the new monitor and software and reinstalled it.. i have tried all the monitor adjustments , i have tried to match resolutions and setting to my perfect monitor 2..nothing works.. from day one , it only had one oddity... there was a white shadow
around the arrow pointer,cursor, my monitor never had that.. i couldn't even make my pointer/cursor , do that..
does anyone think it has a burned out
band " across the monitor? what are these new crystal clear view flat screens like inside? Anyone think there is anything i can do..
could it be a bad video card.. or just a blown new monitor?
thanks for all the help.. i can sure use it..

A:faded 4"horizontal line on hpw2007 monitor-need help !

Either take it in to have it looked at or buy another monitor. If it is under warranty you may be able to have it replaced

1 more replies
Answer Match 39.48%

The top half of the Avatar on my Welcome Screen and Start Menu is faded above a downward curve extending from side-to-side in the image from the tops of the Avatar's frame color shift points--with that part of the picture above the curve being much lighter in color than that below it.

This condition both when I use one of Vista's provided .bmg images or one of my own .jpg images.

Originally, I thought that this was some kind of stupid "effect" that Vista was going for, but now think that it's probably yet another Vista "glitch"!

Any suggestions or comments?


Sorry the attached image is so tiny--I hope that you can see what I mean!

A:Top half of Welcome Screen and Start Menu Avatar is faded!

Well, I found out what 13 of you apparently didn't know in another tech forum. My weird avatar "problem" is evidently normal--an apparent and pathetic attempt by MS Vistra to make your avatar look like it is in a "bubble".

Thanks for stopping-by, at least!

1 more replies
Answer Match 39.06%

Hello,I decided to update my BIOS and I follow HP instruction on this page. I understand everything but when I get to the point where I am supposed to identify my product I get stuck. Because: When I fill my product number (which is A1GOOES) I am told by the webpage that my notebook is HP Pavilion g6-1a01 however I am really sure that my notebook is ProBook 4530s (it is written ON it and also it written in "System information").Hence, the problem is I cannot decide which update of BIOS I should download. I understand that updating BIOS is a serious issue so I write to you before I do some action. curr. ver of bios: HP 68SRR ver. F.27 (23.5.2012).Thanks everyone who can provide some help!

More replies
Answer Match 39.06%

ok so my product key on my laptop base is XXXXX-XXXXX-XXXXX-XXXXX-KVWXP
but the one that windows reports(useing slmgr.vbs -dli in run command) end in KKMRQ also tweakVI also reports this(with a totaly different key but ending in KKMRQ) why has this happened im confused as to why its like this. thanks

A:product key: sticker on laptop key is different from actual product key???

The product key is encrypted in the Registry, so maybe one of those commands/utilities has the wrong encryption algorithm.

If you bought new the key on the sticker on the laptop is your personal unique key and the one in the system is the OEM's "volume license" key.

2 more replies
Answer Match 39.06%

I have had to put a new hard drive in my laptop after the original one failed.
I then reinstalled Vista using the product recovery CD that came with the laptop (not the recovery cds i made as these did not work!)

Vista is now asking me to supply a product key as the one given is incorrect.
I tried the key from the bottom of the laptop, but this does not work.

What to i do?

A:Re: vista product key needed (new HDD - used product recovery cd)

> . I tried the key from the bottom of the laptop, but this does not work

The Windows product key on the bottom side of your notebook is an OEM license key. That means this can?t be used with other Windows versions.

> What to i do?

To buy Windows key or order a recovery disk if available:

2 more replies