Tech Problem Aggregator

No access to websites, able to ping-multiple devices/routers

Q: No access to websites, able to ping-multiple devices/routers

I've read other topics about it here, but my situation is somewhat unique.

1) I can successfully ping websites from the command line (PC)/Network utility (Mac), but can't open any pages in internet browsers. This applies to all devices/OS/browsers (Win 8, OSX, iOS, Android) as well as apps and software that requires Internet access in the household.

2) The incoming e-mails (in Mac mail app) go through.

3) I have 2 routers ? AirPort Time Capsule and the standard router from ISP. I tried them both, same zero result (ping - yes, browsing - no).

ISP hesitates to send help, they don't see any issues on their side of the line yet.

Not posting any logs since it's a multiple devices/routers situation.

Any ideas?

More replies
Answer Match 75.18%

There are multiple websites that I cannot connect to, facebook, rottentomatoes, youtube, to name a few. Others seem perfectly fine. A few seem okay, but seem to be running slowly.

This is the case for both my computer (on which I am running Windows 7), which is connected directly to the router, *and* mobile devices which are connected wirelessly.

On my computer I have tried using several different browsers to no avail, but when I used the TOR browser to proxy, I was able to access them.

I apologize if this has been asked, but I haven't been able to find anything this specific.

Thank you.
 

A:Can't connect to multiple websites on multiple devices

6 more replies
Answer Match 72.24%

Hello,

I am having some trouble with my system. I have a 64bit Windows 7 system with 16GB of ram and the os running on a SSD, and a Intel Xenon 3400 processor.

Just yesterday I started experiencing issues with accessing the internet. I tried Chrome, Firefox, Opera and IE. This is the weird part, I can access Google and Yahoo but no other websites. I can ping every website and get a response. I have tried entering the IP address into the browser to see if it is a DNS issue but the website will not load when trying that either. AIM will connect fine too.

I have ran a full virus scan with AVG and nothing came up. I ran a full scan with Spybot and nothing came up. And I ran a full Malware Bytes scan and nothing came up. I do not have any firewall enabled or currently installed.

I flushed the DNS resolver cache, reset the ipv4 and ipv6 stacks as well as reset the winsock entries. Non of that worked.

All other systems on the network can access the internet without any problems.

I am pretty much at my wits end trying to figure this out. If anyone has any suggestions I would greatly appreciate it.

Thanks!
 

A:Cannot access websites but can ping them

10 more replies
Answer Match 71.82%

I can connect to the Internet with my wireless router just fine, but only certain websites will load normally.  So far, these include Google, Gmail, Youtube, Facebook, and Wikipedia.  Most other websites just show that they are loading forever and nothing ever comes up.  I've already tried power cycling/resetting everything.  
 
As an example of what it says when I ping a website that doesn't work:
 
"C:\WINDOWS\system32>ping www.reddit.com
 
Pinging www.reddit.com [198.41.209.137] with 32 bytes of data:
Reply from 192.168.1.1: Destination net unreachable.
Reply from 192.168.1.1: Destination net unreachable.
Reply from 192.168.1.1: Destination net unreachable.
Reply from 192.168.1.1: Destination net unreachable.
 
Ping statistics for 198.41.209.137:
           Packets : Sent = 4, Received = 4, Lost = 0 (0% loss),"
 
I also can't connect to Skype.  Itunes doesn't respond upon launch, but only while I'm connected.  It works normally while offline.
 
My phone has the same Internet problems while using wi-fi, but not while using data.
My Xbox One can connect to the Internet, but not to Xbox Live.  When I test its network connection, it says "DNS isn't resolving Xbox server names"
 
 
What's also strange is that my roommate isn't having these problems on his computer and phone even though we use the same wireless router.

More replies
Answer Match 71.4%

Hello,
My situation:

I cannot access web pages in IE7 or Firefox, yet I can ping websites and other programs can access the internet, like the Vista desktop gadgets or program updaters. Other computers on the network (running XP professional) are working fine.

My Dell Dimension C521 is directly connected to a DI-624 router. Can you offer any suggestions? The text from a HiJackThis log and running ipconfig /all are below. Thanks for any help you can offer!!

Josh

Logfile of Trend Micro HijackThis v2.0.0 (BETA)
Scan saved at 1:42:15 PM, on 8/4/2007
Platform: Windows Vista (WinNT 6.00.1904)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Program Files\Windows Defender\MSASCui.exe
C:\Windows\sttray.exe
C:\Program Files\Common Files\InstallShield\UpdateService\issch.exe
C:\Program Files\CyberLink\PowerDVD DX\PDVDDXSrv.exe
C:\Program Files\McAfee\MSK\mskagent.exe
C:\Program Files\Google\Google Desktop Search\GoogleDesktop.exe
C:\Program Files\Microsoft IntelliPoint\ipoint.exe
C:\Program Files\Adobe\Acrobat 7.0\Distillr\acrotray.exe
C:\Program Files\McAfee.com\Agent\mcagent.exe
C:\Program Files\Windows Sidebar\sidebar.exe
C:\Program Files\DellSupport\DSAgnt.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files\ATI Technologies\ATI.ACE\CLI.EXE
C:\Program Files\Google\Google Desktop Search\GoogleDesktopIndex.exe
C:\Program Files\Windows Media Player\wmpnscfg.exe
C:\Program Files\Windows Mail\WinMail... Read more

A:Can ping websites but cannot access them in IE7, Firefox, etc.

11 more replies
Answer Match 70.56%

Router Model: SMC7004ABR

Problem: I can ping websites (with their domain name), login to FTP, access e-mail.. but I can't actually go to a website. I tried disabling the firewall, with no luck. I also updated the firmware, but it didn't help.. any ideas?
 

A:Router Problem: Can ping websites, but cannot access them in IE!

16 more replies
Answer Match 70.56%

So all day I have been dealing with very, very slow internet speeds. I am not at all sure why this is happening but it's just been awful. Speedtest tells me about 0.1-1.5 mb/s and some websites just cannot load at all. Sometimes I can load a page if I give it a VERY long time, a few minutes, but it still says request timed out when I ping these websites. (I am running Windows 7 Ultimate). The strange thing is, I can still access Google and a few other websites like youtube, facebook, wikipedia etc... Youtube loads HD videos fast

So basically what led to this happening was me trying to fix a problem I was having with a game that was not making any sound. I followed the instructions given to me by an EA live support person, as given below:





Quote:
I would suggest you to perform the following workaround on your system in order to fix this issue that you are experiencing:

1. Disable antivirus and firewall temporarily.

2. Clean registry, clear cache and temp files by following the steps in the link below:

http://help.ea.com/en/article/how-to-use...pc-issues/

3 . Reset Internet Explorer settings by following the steps in the link below:
How to reset Internet Explorer settings

4 . Restart the system, After that Download and install the game by logging into the origin client from my games section on your system. The game will be installed with the latest updates.

5. Select different install folder for the game.
you
can you give me a few mi... Read more

A:Windows 7 Can only access/ping a few websites since this morning

Demonstration of the problem. By the way, I live in an apartment in Tokyo where the building provides Fibre optic through the wall so I have no idea of their ISP or whatever.

9 more replies
Answer Match 69.3%

Hey,

So my dilemma is this. I have a large facility and want to use my already existing wireless routers as access points. I have a 2 Linksys WRT54Gs ethernet connected to a DSL router. The router IP addresses are as follows:

192.168.1.1 - main DSL router
192.168.1.2 - 1st WRT54G
192.168.1.3 - 2nd WRT54G

I also have them all set to the same SSID (which I want) and automatic channel selection. My problem that I'm experiencing is that my iPads and iPod touches keep dropping connection on me. They'll drop or sometimes have a very slow connection and I can't seem to figure out what is causing it! I have a reliable 7mbps DSL connection and that's more then plenty for me. I'd like to tear all my devices back to factory reset and program them again, the right way this time.

Please let me know what I should do.

Thanks.
 

A:Multiple Routers as Access Points - HELP!

I won't try to tell you what you should do, but I'll mention some possible causes of the symptoms.

When a wireless router (or wireless access point) is allowed automatic channel selection it often gets carried away with all the freedom and responsibility. There is a good chance that some or all are frequently changing channels or checking to see if a better one exists and can't be bothered with giving 100% attention to its clients. In case its not obvious, when the access point changes channels there is at least a brief disconnect until the client connects to the new channel.

When Windows has the opportunity to connect to multiple networks with the same SSID it will choose one at random (not necessarily the strongest) and sometimes randomly decide to disconnect and then connect to a different one (not necessarily a stronger one). iOS likely works similarly.

Some hints: if you want fairly reliable connections use different SSIDS, make your own choice of channel assignments, and either assign each device to use only one of those, or if iOS gives you a way to prioritize connections do so with care.

If you want good roaming and good connections relinquish the requirement for using independent WAPs or routers and open your wallet.
 

3 more replies
Answer Match 69.3%

My sister can't access to some websites (especially .it websites) with her MacBook Pro (late 2009) and her ipad mini.
She lives in north italy, her ISP is WIND and this is the traceroute from her MacBook Pro running a clean installation of Mavericks (she had this problem even with previous versions of Mac OS X): I took examples with this website http://www.conforama.it
Code:

traceroute to www.conforama.it (95.110.203.14), 64 hops max, 72 byte packets
1**192.168.0.1 (192.168.0.1)**2.532 ms**2.086 ms**2.045 ms
2**151.6.168.72 (151.6.168.72)**12.142 ms**12.264 ms *
3**151.6.204.2 (151.6.204.2)**20.999 ms**18.149 ms**20.251 ms
4**miot-to2-fiar-b01-po02.wind.it (151.6.7.29)**60.239 ms**39.516 ms**39.264 ms
5**151.6.0.1 (151.6.0.1)**69.778 ms
****151.6.0.249 (151.6.0.249)**39.674 ms
****151.6.0.251 (151.6.0.251)**38.732 ms
6**151.6.64.254 (151.6.64.254)**40.175 ms**80.144 ms**60.218 ms
7**151.6.65.235 (151.6.65.235)**110.479 ms**50.302 ms**29.280 ms

Her husband has a Asus laptop running Windows 7 and he can reach the website normally.

I live in Rome and i also have the same ISP and a MacBook Pro running Mavericks but i can open the website normally, this is my tracerout:
Code:
traceroute to www.conforama.it (95.110.203.14), 64 hops max, 72 byte packets
1 192.168.1.1 (192.168.1.1) 2.411 ms 2.415 ms 1.874 ms
2 * 151.6.149.72 (151.6.149.72) 14.383 ms *
3 151.6.85.98 (151.6.85.98) 16.150 ms 12.791 ms 14.316 ms
4 151.6.4.214 (151.6.4.214... Read more

A:Can't access to some websites using apple devices.

Her husband has a Asus laptop running Windows 7 and he can reach the website normally.Click to expand...

Internet connection through the same router?

If it weren't for that complication I'd say the ISP has a routing problem which only shows up with the Default Gateway her router is assigned.
 

1 more replies
Answer Match 68.04%

When I plug in SD card in my notebook directly (through SD card port) or by using SD card adapter it shows up in My Computer (as RAW data in Properties), but when I try to open it, it says "Please insert disk in disk drive". It's same for any other other SD card or USB stick. Before I could access files, but would have to use attrib cmd command to unhide them. I had random shortcuts showing up, and almost always Trashes file. This is why I suspect it is a malware problem. I also can't access any antivirus website. SD cards work when I put them in Android. I use Windows XP SP3.

A:Can't access external storage devices and antivirus websites

Here are my FRST logs.

 Addition.txt   14.24KB
  0 downloads

 FRST.txt   40.28KB
  1 downloads

0 more replies
Answer Match 67.2%

Hi! Im trying to improve my home network. Currently I have the modem and wireless router setup in my basement with one computer hardwired to the router and multiple laptops spread throughout the house. However the laptops at the top of my house do not have good signal.

My house is wired with ethernet cabling throughout the house and walls. What I want to do is to take advantage of this wiring and setup multiple routers or AP's throughout house (not sure about difference). Also to even allow some laptops to connect with an ethernet cable rather than wireless.I am not sure how to do this currently.

All the ethernet cableing converge in my garage as an unfinished mess (see pic). I wanted to run a cable from my router to a plug in the wall which would take the signal to my garage. I would then need some kind of device like a hub or switch but i am not sure what kind of device. I was hoping it would then distribute the signal to the other wires and send it throuought the house. I then wanted to connect another device that would like another router or AP in a another part of the house but am unsure what kind of device and how to do so.

If anyone could help me out it would be much appreciated.
 

A:Need help to setup home network with multiple Access Points or Routers

With Ethernet wiring available you have some nice choices;
use wires to access remote locations
and place wireless in the room(s) needed
Likely you can just wire to each floor and the garage and then let the wireless be accessed from those locations.

The Modem==>#1Router can control all the DHCP assignments and assuming that you only need four remote locations, you can use a 4-port router. If you need more than four, you will need a Switch, eg
Code:
modem==router---switch-- four connections
|
+---- three more connections
Each port from the router is wired to an Access Point or a WiFi router (doesn't matter so use whatever you have). The trick is
disable the dhcp in each Wifi device
attached the ethernet from #1Router to any LAN slot on the WiFi (leaving its Wan slot empty)
This will place all the WiFi on the same subnet as #1 router and sharing et al works across the board

WiFi setups:
start with just one to get the setup running and then you can use that as a template to
config the others. When performing this task, ALWAYS connect a pc to the Wifi device with a cable!

a) change the SSID to something unique to you but not obviously name, address ,,, (
you could add a suffix to it to identify one from the other

b) set a unique channel on each WiFi router to reduce interferrence.
(if you're using a DSL service, then make sure all phones in the house have a new filter attached)

c) enable encryption (WPA2 or WPA in that ... Read more

1 more replies
Answer Match 65.1%

Hi there.
I am using my phones 3G to type this and it's a real nuisance since I cannot research information for essays and other important aspects that I need when studying for my A levels.

Anyway, it started last night around 11pm, everything died and I thought it was because of the bad weather.
I woke up to sunshine however the internet was still not working.

The router is a SuperHub 2 and it had no problems up till now, the lights for 5Ghz and 2.4Ghz are flashing and so are the other lights on the router - this the router is working.

The problem is the connectivity, I use my laptop, iPhone and computer all together when studying and playing games. All of which has the same problem. All have the 5 bars connectivity however they all say "no internet access" and no response from the DNS servers.

What is the problem then?


What I've done:
- I have release and renewed the IPs
- reset router numerous times
- turned on: off router numerous times
- fiddled with wires to make sure they're plugged in.
- turned on and off computers and laptops.
- set IvP4 to automatic.
- waited hours.
- went onto the Virgin Media router page via 192.168.0.X. Then I started the router up in factory status, starting I up a few times.


How do I fix this nuisance? I need the internet now, for work purposes.
Please help, since it's affecting me and my family members and all of our devices.

A:No internet access on multiple devices

Does the Virgin Media router page give you a status of the WAN?

We had a bad storm last week and it took a few days after power was restored for Comcast to repair their lines.

I was able to get to my router, but the WAN address was 0.0.0.0 - can't get there from here!

If you have a WAN address, turn everything off (no power) then
power up your cable modem, wait a few minutes for it to cycle through what it cycles through
power up your router (if seperate) wait for it to cycle through what it cycles through
finally power up your machine and check the network status on the Virgin Media router

If you don't have a WAN address, report the outage to your provider. They probably already know about your area, but a call never hurts.

Bill
.

8 more replies
Answer Match 64.68%

Okay, so I moved my wireless router to a more central location in my house (I got low signal in my room) and since then I've been able to connect to the network but only with limited access. Trying to connect to a webpage results in the "DNS lookup failed" error message (Chrome). My brother's computer had had the same issue, and the PlayStation 3 has had connectivity issues also, however I have been able to use my phone with the WiFi without any issues.

I've tried unplugging/turning the router on and off to no effect. Using a different router does not change the situation either. When I try to diagnose the network connection, it says that it could not identify the problem. Any ideas?

Some information:

Both computers run Windows 8
My phone is a Nokia Lumia 620 running WP8
The WiFi status window states that IPv4 and IPv6 have no internet access
My computer uses a Qualcomm Atheros AR5B125 wireless network adapter and says it is working correctly. The adapter is set to work with IPv4/6. IPv4 is set to obtain IP & DNS addresses automatically.

Any help is greatly appreciated. Thanks!
 

A:wifi limited access on multiple devices

For a Windows PC ...

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If your only email accounts are free (Hotmail, gmail, etc.) try this direct link. If you need help with a screen shot see TSG Posting a Screenshot. FWIW to take screen shots with Windows 8 or 7 or Vista I prefer to use the built-in Snipping Tool.

Identify your network if it is not obvious.

Also show ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

1 more replies
Answer Match 63.84%

Hi Guys,
 
Simple issue: Paypal.com won't load on any device connected in my home, pc, laptop, mobile phone etc.
 
This can only lead me to believe it's a router realted issue though I can't seem to find a solution. I've factory resetted the router, changed it for a new one etc. and still paypal.com is unaccessable.
 
If I run a 'cmd' ping test on the URL, it attempts four connections and fails. The windows host files are fine and I've tried turning of all firewalls, anti-viruses, malwares for a short time to test. Still fail.
 
Does anyone know a solution I can try?
 
- Milko

More replies
Answer Match 63.84%

Hi there,
I find this problem very tricky to explain due to its weirdness, so my apologies if this explanation doesn't come across very well.

I have been dealing with a very strange problem in that for several hours of each day (usually in the evenings) my Ipad suddenly refuses to send and recieve mail via the Ipad mail app. Also, during these same periods my PS3 console is blocked from the playstation network. My PC running XP mostly remains fine except youtube is often inaccessible via my gmail login and some sites appear to slow down, while most sites (non-google related) appear to behave as normal.
 
Strangely, I am still able to access my gmail inbox via web broswers on both my PC and Ipad - but the Ipad app itself refuses to work at all.
The problem only exists for periods of a few hours each day and then everything returns to normal with no problems of notice.
After running a quick scan with Malwarebytes, it found "pup.offerware" which I removed.
 
Any help would be amazing! Many thanks and here is my log:
 
 
DDS (Ver_2012-11-20.01) - NTFS_x86
Internet Explorer: 8.0.6001.18702  BrowserJavaVersion: 10.25.2
Run by Username at 21:50:49 on 2013-09-04
Microsoft Windows XP Professional  5.1.2600.3.1252.64.1033.18.3071.2111 [GMT 12:00]
.
AV: AVG AntiVirus Free Edition 2013 *Enabled/Updated* {17DDD097-36FF-435F-9E1B-52D74245D6BF}
FW: Online Armor Firewall *Enabled*
.
============== Running Processes ================
.
C:\Program Files\Tablet\Pen... Read more

A:Google/Gmail access blocked on multiple devices

My problem no longer exists. Could this thread please be closed/deleted? I could not find how to do that myself.
Thanks.

3 more replies
Answer Match 60.06%

1 modem
1 Belkin N600 router
1 Linksys E1200 router running DD-WRT

Currently, Belkin router is connected to modem. Belkin's ip is 192.168.2.1
Linksys router's IP is 192.168.1.1 and its WAN port is connected to Belkin's LAN port.. internet is working fine however my PC can only access the GUi of the Belkin router since it is conected to the LAN port of the Belkin Router. I also want my PC to access the Linksys GUI without having to plug my PC's cable to the linksys..

How do i go about doing this?

Thanks a lot
 

A:Solved: 1 modem and 2 routers conedtion access both routers GUI

8 more replies
Answer Match 57.54%

firstly what is their acronyms and meaning of b/g/n
then what does each letter do, in compatibility, differences, speed

A:what does the b/g/n in wireless devices and routers do

The letters designate the set of communications standard or protocol that the device in question was designed to meet and provide.

Very roughly:
IEEE 802.11a = operates in the 5 GHz band with a maximum net data rate of 54 Mbit/s, plus error correction code, which yields realistic net achievable throughput in the mid-20 Mbit/s.
IEEE 802.11b = operates in the 2.4 GHz band with a maximum raw data rate of 11 Mbit/s
IEEE 802.11g = operates in the 2.4 GHz band with a maximum raw data rate of 54 Mbit/s, plus error correction code, which yields realistic net achievable throughput in the mid-20 Mbit/s.
IEEE 802.11n = operates in both the 2.4 GHz and 5 GHz bands with a maximum raw data rate of 150 Mbit/s per channel. Uses multiple channels on multiple antennas and "streams" to achieve data rates of 300 or 450 Mbit/s (and theoretically 600 MBit/s on 4 streams).
It is, of course, much more complex than that. But that is the meat of the matter.

A device that is designated 802.11b can only do 802.11b. But a device that lists b,g, and n can do any or all of those protocols.
And coming soon will be IEEE 802.11ad. Operates in the 5 GHz band with a maximum raw data rate of 60 Gbit/s.

2 more replies
Answer Match 57.54%

Hi there

Not sure whats happening here but getting multiple displays for the same devices !!!!

Any fix, or is system Broken.



Cheers
jimbo

A:Devices and Printers - devices being displayed multiple times

Looks like Ghosts of DLNA devices. Start by taking offline any DLNA capable gear, reboot the Gateway and also clear its IP Table.

Also clear out those ghosts from Devices and Printers.

For some reason this started in Windows 7, when Microsoft started to play games with DLNA and media Shares.

1 more replies
Answer Match 55.44%

Does anyone know of good freeware to ping key devices on a network? And resolving the hostname would be great too.

Thanks for any help.
 

A:Freeware to Ping Key Devices

SuperScan will search a whole subnet and resolve host names as well.
 

1 more replies
Answer Match 55.44%

Everything was great until last week. I can even watch 1080p with my 3mbps internet speed. I have 1 or 8 ping not more but now i have 50 and getting stabilezed and that's scares me. I called my isp and they said there is no problem neither our connection or yours.

I pluged lan cable still same and then i decided to test internet connection with my phone. I connected the same modem and i've got 9. Whaaat?

Shortly: With computer : 50 (before was under 9)
With my phone: 9

I am not expert of computer or internet but i think those ping supposed to be same isn't it ?
 

A:Ping changing by devices

Pingtest.net - The Global Broadband Quality Test

Check for packet loss on your computer.
 

1 more replies
Answer Match 55.02%

I cannot get on any websites:"Internet Explorer cannot display page" There is no error code to go with the message. I have tried the 'diagnose connection problems' button, and it gives me the 'no problems with your network connection found.'

However, using CMD, I can ping yahoo.com, ask.com, google.com, but not aol.com or msn.com (or any microsoft websites). And, oddly enough, the windows update works, but no antivirus or anti spyware updates work. I am completely stumped. Please help.

I have a Compaq Presario CQ50 laptop runnning Windows Vista Home Premium.

I have been using Avira Antivirus and AdAware AE for protection. I am connecting wirelessly to cable internet connection with a firewall enabled router. (No other computer on the network has connection problems.) Windows Firewall and Windows Defender are turned off. I had this problem with IE7 to start and thought upgrading to IE8 might overwrite any corrupted file, but I still have the same problem.

More replies
Answer Match 55.02%

I have tried every solution out there. What happened is that I had a trojan that redirected my google queries. superantispyware found the trojan, deleted it, but now I cannot connect to the internet.

I have windows xp, have checked that IP address is obtained automatically, all services are running that should be running, and have used winsockxpfix.

Here is my netstat and ipconfig. any help would be appreciated before I either kill myself or re-install

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\rdost>netstat -s
IPv4 Statistics
Packets Received = 8472
Received Header Errors = 0
Received Address Errors = 4375
Datagrams Forwarded = 0
Unknown Protocols Received = 0
Received Packets Discarded = 13
Received Packets Delivered = 8459
Output Requests = 3691
Routing Discards = 0
Discarded Output Packets = 0
Output Packet No Route = 0
Reassembly Required = 0
Reassembly Successful = 0
Reassembly Failures = 0
Datagrams Successfully Fragmented = 0
Datagrams Failing Fragmentation = 0
Fragments Created = 0
ICMPv4 Statistics
Received Sent
Messages 1 1
Errors 0 0
Destination Unreachable 1 1
Time Exceeded 0 0
Parameter Problems 0 0
Source Quenches 0 0
Redirects 0 0
Echos 0 0
Echo Replies 0 0
Timestamps 0 0
Timestamp Replies 0 0
Address Masks 0 0
Address Mask Replies 0 0
TCP Statistics for IPv4
Active Opens = 22
Passive Opens = 5
Failed Connection Attempts = 0
Reset Connections = 20
Current Connections = 3
Segments Received = 1... Read more

A:Can Ping, but cannot see websites

16 more replies
Answer Match 54.6%

Problem started with the ?XP Antispyware 2012? virus, which I tried to remove using these tools:
RogueKiller.exe then HijackThis.exe then Malwarebytes
The virus popups disappeared but Malwarebytes issued warnings (approx. every 6 seconds) that it was blocking outbound traffic to malicious websites.
Also noticed in Task Manager processes that PING.EXE was running. Stopped the process but it starts back up within a few minutes.
Found Apple Itune software on the computer, which I had not knowingly loaded. Therefore I deleted all Apple software including QuickTime.
Installed and ran RegServe which found and fixed about 1500 registry entries.
Ran a couple of McAfee and Malwarebytes scans that find no infections. However the blocked outbound traffic to malicious websites and the PING.EXE process still persist.

First attempt to run a GMER scan locked the computer. I had to cold reboot. Second attempt completed but displayed this warning: ?GMER has found system modification caused by ROOTKIT Activity?

.
DDS (Ver_2011-08-26.01) - NTFSx86
Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_24
Run by Owner at 16:57:55 on 2011-12-14
Microsoft Windows XP Home Edition 5.1.2600.3.1252.1.1033.18.1471.828 [GMT -5:00]
.
AV: McAfee Anti-Virus and Anti-Spyware *Enabled/Updated* {84B5EE75-6421-4CDE-A33A-DD43BA9FAD83}
FW: McAfee Firewall *Enabled*
.
============== Running Processes ===============
.
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WIND... Read more

A:PING.EXE and Malicious Websites

Hello and Welcome to the forums!My name is Gringo and I'll be glad to help you with your computer problems.Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.Do not run any other tool untill instructed to do so!Click on the Watch Topic Button and select Immediate Notification and click on proceed, this will help you to get notified faster when I have replied and make the cleaning process faster.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.Run Combofix:You may be asked to install or update the Recovery Console (Win XP Only) if this happens please allow it to do so (you will need to be connected to the internet for this)Before you run Combofix I will need you to turn off any security software you have running, If you do not know how to do this you can find out >here< or >here<Combofix may need to reboot your computer more than once to do its job this is normal.You can download Combofix from one of these links.Link 1Link 2Link 31. Close any open browsers or any other programs that are open.2. Close/disable all anti virus and anti malware programs so they do not interfere with the runn... Read more

13 more replies
Answer Match 54.6%

I'm not sure what happened to my connection, but I've been trying to play a few games such as league of legends and ffxiv and for some reason I can't connect to them. I decided to look at my internet connection and I ran intel PROset wireless wifi manual diagnostic tests and my ping test failed. Also I downloaded MiniToolBox and got these results. They are in the attachment. Can anyone tell me what is going on with my connection? I would really appreciate it, thank you.
 
Edit in title: I can use the internet, but can't ping websites such as yahoo and google.  Fixed title - Hamluis.
 
MiniToolBox by Farbar  Version: 21-07-2014
Ran by Afua (administrator) on 04-08-2014 at 23:48:38
Running from "C:\Users\Afua\Desktop"
Microsoft Windows 7 Ultimate  Service Pack 1 (X64)
Boot Mode: Normal
***************************************************************************
 
========================= Flush DNS: ===================================
Windows IP Configuration
Successfully flushed the DNS Resolver Cache.
========================= IE Proxy Settings: ==============================
Proxy is not enabled.
No Proxy Server is set.
"Reset IE Proxy Settings": IE Proxy Settings were reset.
========================= FF Proxy Settings: ==============================
"Reset FF Proxy Settings": Firefox Proxy settings were reset.
========================= Hosts content: =================================
# ::1        ... Read more

A:Can't Ping Websites, but can use the internet

Appears that you have some sort of hardware problem.  But let's see if we can get more data.
 
Please...Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
I would uninstall Pando Media Booster, see Reading Material .
 
Louis

2 more replies
Answer Match 54.6%

Hi there! i recently just ran into a confusing issue that i cant sort out.

- i can ping websites like google hem with my web browser
- i cannot connect to steam online

thats my issue in a nut shell. I posted my ipconfig/all command thingy below just incase it will be useful
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Beaner>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Dharma
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ed.shawcable.net

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : ed.shawcable.net
Description . . . . . . . . . . . : Intel(R) 82579V Gigabit Network Connectio
n
Physical Address. . . . . . . . . : 10-BF-48-7B-48-CC
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::7cc0:eb9d:effe:8ddd%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Saturday, January 26, 2013 6:29:59 PM
Lease Expires . . . . . . . . . . : Sunday, January 27, 2013 6:29:59 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 235978568
DHCPv6 Client DUID. . . .... Read more

A:I can ping websites but not browse them

I can ping websites but not browse themClick to expand...

Could be a firewall issue or a need to do the following repairs. What firewall or security suite? What browser(s)?

TCP/IP stack repair options for use with Vista and 7 and 8.

Start - All Programs - Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt. [For Windows 8: <Windows Logo> + x - Command Prompt(Admin)]

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log

Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log

Reboot the machine.

i can ping websites like google hem with my web browserClick to expand...

What???
 

1 more replies
Answer Match 54.6%

Hi, I have a laptop that wirelessly connects to a router (Linksys WRT54G) this morning in the space of a minute it stopped working, and now none of my programs can connect to any website.

I've tried the following:
I can ping and trace both IPs and urls
A spyware and AV scan came up negative
I have no proxies setup
I have tried with my firewall off

A friend with the same wireless card and driver version can connect to the internet, as can my computer which is wired to the router, however, if I directly connect my laptop it still doesn't work (this normally fixes any connection issues).

Windows XP SP2
Atheros AR5005G (Ver 4.1.2.108)
 

A:Can ping, can't connect to websites

10 more replies
Answer Match 54.6%

I am able to ping and tracert websites by name but not load them in firefox or IE. I was able to update minecraft and connect to multiplayer servers to play with others. I have checked the hosts file and am able to telnet www.google.com 80 and get a reply in html. I am connected to my modem through a wireless network using a dynamic IP and have uninstalled all antivirus software. The issue started just after installing SpyHunter and running a scan with it. Any help would be appreciated.
*Edit: I am using windows 7
 

A:Can ping websites but not load them.

9 more replies
Answer Match 54.6%

I consider myself an advanced user, but this one I've never seen, nor can I find info out for...

I haven't been able to plug a video camera or external hard drive into my computer via FireWire. I then tried a different cable, nothing. I then tried a different device and cable, nothing. I then tried a different computer with two devices, nothing.

My USB2.0 works fine with each device and computer. I also took the new computer into CompUSA and they tried their firewire device and all worked. I bought a new firewire cable, but I have the same luck with each device.

How can 2 external hardrives, and one sony camera not work, after working for a year. What happened? What do I need to do?
 

A:Multiple firewire devices on multiple computers not working

6 more replies
Answer Match 54.18%

Hi,

I have 2 Vista machines...one behaves somewhat normally, but another that doesn't want to play nice.

I can access the Internet, ping local XP machines, but when I try to access several NON-PC machines that are wireless...that is where the trouble begins.

I am just trying to ping that machines locally and they wont respond fully. I mean,
they don't time-out...then just give the dreaded "Destination Host is Unreachable"
which is not true as other machines on the network can see them.

I have tried to add ARP entries manually (which it won't let me do) It is driving me bonkers and I have been looking high and low for a solution. It just doesn't make any sense to me, especially since I have another machine that works just fine

Any help or pointers would be much apprectiated

Rod

A:1 Vista machine that can't ping various devices on same subnet

Layout the topology.

4 more replies
Answer Match 53.76%

All of the power went off in the house today, and since then, my computer has been unable to access the internet. Windows 7 (x64) tells me there is no problem reaching microsoft.com
I can ping any website.
When I try to load a page, it gets stuck on "Web Site Found, Waiting for reply"

No internet games or applications will work.
The only thing different about this computer than the others on my network is it is a wired connection.

This is the only computer affected.
Please help.
 

A:Solved: Cannot get online, yet can ping websites

9 more replies
Answer Match 53.76%

Okay so this has me completely baffled really. I've tried everything I know and could find to do on the internet to solve this problem, but nothing will work.

I recently purchased the new Torchlight 2 game by Runic and when I try to go onto their websites to set up an account I encounter a "cannot load page" screen from all of my browsers. These websites are www.torchlight2game.com and www.runicgames.com

I know it is not to do with my computer because no one in my household can load either website. My ISP is effectively daft on this problem and their solution is for me to pay for a new router.

Anyways I hope someone can be of help and I would really appreciate it.

All the best,
Liuken
 

A:Cannot load, ping or tracert 2 websites

It sounds like the server might have been over-saturated or down. Have you tried again? Comes up fine for me. I'm curious what your settings are and what your results look like. Could you post a copy of ipconfig /all (delete the physical address line) and a copy of your results from a tracert.
 

1 more replies
Answer Match 53.76%

Hi everyone, this is my first time posting and I been surfing through the internet for days and weeks but found no solution to my problem. I'm currently using window 7 and First is that my IE 8.0 is not working meaning it just cannot find any webpages but my firefox is able to work with no problem. I have tried to reset my router, went to IE/tools/internet option/connection/lan setting and checked off everything there. I'm also 100% current that i'm virus/malware free because i download alot of problems to scan my computer and came out clean.

Currently i'm using studio one 19 from dell

Also I decided to post a hijackthis scan and see if anyone can get anything out of this. And thanks for the help in advance, i had been trying to solve this problem for a long time with luck so any help would be appreciated. =]

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:18:17 PM, on 3/9/2010
Platform: Unknown Windows (WinNT 6.01.3504)
MSIE: Internet Explorer v8.00 (8.00.7600.16385)
Boot mode: Normal

Running processes:
C:\Program Files (x86)\BillP Studios\WinPatrol\WinPatrol.exe
C:\Program Files (x86)\Mozilla Firefox\firefox.exe
C:\Program Files (x86)\Trend Micro\HijackThis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = Preserve
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://g.msn.com/USCON... Read more

A:Connected but cannot browser, ping websites, etc

i want to add that every other computer i have is working with their IE and everything working so i'm guessing it is something with my computer?
 

1 more replies
Answer Match 53.76%

I've been having some browser trouble that I can't figure out. After a while of being online, I suddenly am unable to browse websites.

Firefox 3.5 seems to get stuck in offline mode, and eventually just tells me it is unable to connect to the website. IE 7 gives a similar response.

The thing is that I can still use Windows Live Messenger, any downloads I am running are still working, and I don't get disconnected from any games online.

I've tried pinging various websites when it does lock up and I receive normal responses. I've tried updating my network drivers with no luck, and ran a few virus scans but haven't found anything. The only thing that fixes the problem is to reboot the computer.
I'm currently running Windows Vista Ultimate SP2.
 

A:Unable to browse websites, but can still ping

13 more replies
Answer Match 53.76%

When I ping any website in cmd I get request timed out. I can still browse the internet without any problems.
Microsoft Windows XP [Version 5.1.2600]
© Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\kkusmider>ping google.com
Pinging google.com [74.125.225.70] with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 74.125.225.70:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Documents and Settings\kkusmider>ping localhost
Pinging NRGWK11.networkregroup.local [127.0.0.1] with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Documents and Settings\kkusmider>
The error message from MAILER-DAEMON I am getting on the bounced emails is
 
Subject: Undelivered Mail Returned to Sender
This is the mail system at
host mail61-ch1-R.bigfish.com.
I'm sorry to have to inform you that your
message could not be delivered to
one or more recipients. It's attached
below.
For further assistance, please send mail to postmaster.
If
you do so, please include this problem report. You can delete... Read more

A:Email being bounced and cannot ping any websites.

Not all sites respond to pings.  If one doesn't work you have to try others.  You probably did.  Google usually works - maintenance outage on that URL?  The same applies to email if the recipient mail server is frequently inaccessible.  Depends where it is in the world.  It also depends if you have been blacklisted by the recipient or, as you noted, the server sees your stuff as spam.  If you google "bigfish.com" you will see that others have problems sending to that server.

2 more replies
Answer Match 53.34%

Hi Guys and Gals, after reading many posts on this site, I havn't figured out my problem, but I have noticed there are a lot of smart people here, so I'm hoping someone can help me with my connectivity problem.
Just put a new build together, Formula III, core i7960, 8GB ram, freshly installed copy of windows (Nothing else installed at all) I am using TP-Link TL722n [COLOR=blue !important][COLOR=blue !important]wireless [COLOR=blue !important]adapter[/COLOR][/COLOR][/COLOR], which works fine on any other computer, but not on the new build. Router is a linksys WRT54GS.
First, after installing the wirless driver, I can see my network but it can't obtain an IP. So I issue it a static IP, and it says I am connected and have internet access. But when i open up IE, doesn't work. Tried Resetting IE, and that didn't work.
I can ping other [COLOR=blue !important][COLOR=blue !important]computers [COLOR=blue !important]on [/COLOR][COLOR=blue !important]the [/COLOR][COLOR=blue !important]network[/COLOR][/COLOR][/COLOR], and and can also ping websites. Internet is working on all other computers. See my info below, thank you in advance for anyone taking the time to read this.

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\JBuiles>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : JBuiles-PC
Primary [COLOR=blue !important][COLOR=blue !important]Dns[/COLOR][/COLOR] Suf... Read more

A:Solved: can ping websites but no internet browsing

16 more replies
Answer Match 53.34%

Yesterday my wireless connection was fine for almost two years, but suddenly today I'm having problems connecting to many websites. Google loads fine, but searching at Lowes.com causes it to load forever. Netflix loads, but trying to stream a movie causes it to tell me I'm not connected to the internet. This was in Firefox, I downloaded Chrome and got the same problems with the same sites. I also noticed that the Signal Strength fluctuates between Good and Low (normally low), when it's never done that before.

I run command.exe and ping the sites that won't load and get timeouts every time (pinging working sites gets returns each time).

I restarted several times, but to no avail, and my laptop gets a Very Good signal sitting on top of the chassis, so it's not the router strength. I've even gone as far as to switch the wireless card into different PCI slots, but get the same issue in each one.

What could be causing this?

Thank you,

Cory

Edit: I've also checked for malware and come up with nothing, as well as did a system restore to a working time.
 

A:Signal Strength Low and can't load/ping some websites.

8 more replies
Answer Match 53.34%

i am running a home network that works great with no issues except one. my computer cant find the others on my network as well as vise versa. we have computers in my house. the main one is in the middle with the dsl and the main netgear wireless n router wnr834b v2. the internet goes from the dsl into the net gear router. then the computer connects off of that via Ethernet. now i have my computer and its wired as well. since i needed some extra ports i used another belkin wireless n router. i can access both routers via the internet but it shows only under the netgear router page that the main computer and my router r connected. (as well as the other comp) now since it doesnt show me as one of the connections off of the router i cant see the other people in my network.

is there a way to fix this?
 

A:multiple routers

6 more replies
Answer Match 53.34%

ok well this is going to sound crazy but here we go i have a ubee cable modem router model number u10c037 out of that i'm going to two linksys wrt54g's to split to all the rooms in my house then in two of the rooms i have linksys befsr41's and finaly in one room i have a net gear wgr614v10 now it works sorta but i keep having to reset them every now and again right now i'm useing all of the down stream routers as switches what i'm asking is why do i have to keep resetting the system and what can i do to keep it from happening if anyone can help me in great detail i would be very happy i think its an ip address problem but not sure
 

A:Multiple routers 6

Starting from the modem;
isp = = modem --->(WAN port)ROUTER#1​then to have ALL systems on one network, daisy chain from R#1 to the next but
ONLY connect (LAN)-->(LAN) between all the others. Router#1 will now control
al DHCP assignments - - even for any WiFi router in the chain.

This requires that ONLY R#1 have an active DHCP, so each of the others need
to be set to disable DHCP.

1) One-by-one, connect Router#x via wire to a system, use your browser to access the
router default address, login using the user/password for that router, and DISABLE DHCP.

2) Many routers come preconfigured for lan address 192.168.x.1 where x is 0,1, or 2

Every network can never have duplicate IP address and if allowed, will case network failures.

As you disable the DHCP, also set a new default LAN address 10.0.x.1
where X is 1,2,3,... N and use a new X for each one you've fixed.
Thus, if ever they are wired R1(lan)--(wan)R2---(wan)R3---(wan)R4)
the addresses would be 10.0.1.1-->10.0.2.1-->10.0.3.1-->10.0.4.1
(but you don't want that for routing table reasons)

3) also change the default password for each router.
If your system login password is abcdefg,
you might set the primary router#1 password to abcdefg#1
router#2 to abcdefg#2 and so on.
 

2 more replies
Answer Match 53.34%

i need some help with my network. it just to all work fine but i cant remember how i had it configured before. this is what i got

in the basement i have a speedtouch 5x6 adsl moden/router wich is conected by ethernet cable to a sweex lw310 300n wireless router on the first floor. from there i have an ethernet cable running to the 2nd floor on the otherside of the house to a linksys wrt54g wireless router wich hooks up to my pc and xbox and wirelessly to my brothers laptop in the next room.

i now have the sweex dhcp disabled and the cable coming up pluged directly into my pc, this works. i can plug my xbox into my other port and this also works but it complains about the nat type being stikt. i tried forwarding the ports needed on the speedtouch and enabeling the unp in all diferent combos but it made no difference.

when i hook up the linksys and then plug the pc and xbox into that i cant connect to the internet

can anyone please tell me what to do, thanks a lot.
 

A:multiple routers

You have two secondary routers ...

JohnWill's procedure (Aug. 30, 2008) for configuring a secondary router as a switch and, optionally, wireless access point follows.

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. [You will not need a cross-over cable if one of the "routers" is a computer.] Leave the WAN port unconnected!

This procedu... Read more

2 more replies
Answer Match 53.34%

Does anyone know of a router that can have more than 1 DMZ?? It will be for a small business, so the less complicated the better! Thanks! Alan
 

A:Multiple DMZ routers??

7 more replies
Answer Match 53.34%

I have recently begun to buld my own PCwhich I'm proud of but my question is.
When I have finished it is going to go in my room upstairs.
Would it be possible to attach a router to the new PC upstairs and connect to the other
router(Main) downstairs?

Its just I want to keep speed up and reduce on wiring the routers are wireless.
 

A:Multiple Routers

It depends on the routers. Most routers only work in infrastructure mode, but some can be configured as a wireless bridge. What are the exact make/models of the routers in question?
 

3 more replies
Answer Match 53.34%

Hi,

My landlord has a router, on the 192.168.1.xxx range, ports are forwarded to .1.13(WAN side of my router upstairs), then from there to .2.155 (dumb AP) and THEN to the server .2.31

Yet, I cannot VNC in on 5800 or 5900. I can within the network, not a problem!

Anyone got an idea what's going on here?
 

A:VNC through multiple routers

hum; cascading routers do create problems when port forwarding is required.

you need each router to port forward to the address of the next router and
the last one forwards to your system for the VNC client.
 

5 more replies
Answer Match 53.34%

Usually, the home user has little need for two or more routers.
To get more connectivity, one only needs to add a switch/hub
(switch is preferred) to the existing router and more slots become
available for more systems.

The typical case for the home user to add a router is expanding a wired
LAN and adding wireless connectivity at the same time. The issue will
be the configurability of both routers. The setup will look like


Code:

modem -- routerA ---- routerB ---b-systems
+
|
+------ a-systems

Which router is existing vs new really doesn't matter other than getting
the configuration correct. If I had my choice however, the B-router
would be my new wireless router for security reasons (later described).
A wireless Access Point would also fit nicely in the router-B location.

CONFIGURATION

Both routers will need to be configured, likely hardwired at first to
one of your systems. You will need to access your router?s
configuration page which is brand-name dependent:

Netgear 192.168.0.1
D-Link 192.168.0.1
Linksys 192.168.1.1
Belkin 192.168.2.1​
Once you've logged into the router, be sure to set a new admin password!

TWO parameters will determine success/failure of the configuration:
(1) the router's ip-address and (2) the subnet mask.
(of course you need the other stuff too, but these determine the data flow)

The typical problem that can arise is the i... Read more

A:Tip: using multiple routers

how to setup wireless router to wireless router
please give me some help
 

1 more replies
Answer Match 52.92%

Hi,
I've got this annoying problem, which I've tried to patiently deal with with my Verizon Tech Support guy, but like usual, it came out without any substantial result.

Here is the problem:
A desktop and a laptop, both running xp; a westell versalink dsl modem;
both machines can ping with site names, ie www.google.com
can ping with ip addresses
and return with 0% LOSS
checked:
1. browsers are not "work offline"
2. tried turning off my firewall, but the same results
3. tried turning off antivirus (Avest)
4. is obtaining ip address and DNS server address automatically

But whenever trying to access websites through browsers, it would be kept loading, and the status bar would say: "website found, waiting for reply" (something like that...)

Tried to work with Safe Mode with Networking, nothing still nothing worked.

Reset the modem, and tried to connect again.
The problem remains.

Phoned up a neighbor and tried to use his wireless connection on my laptop. Everything works with his connection. But not mine.

Then the Tech Support guy told me that he has consult with a network engineer and their solution is that, it should not be my machines, not their fault (who knows), not my account... it appears to be my dsl modem. According to him, it seems to be that the modem is malfunctioning and that it cannot convert network messages into webpages... And his suggestion is to replace my modem.

But when I hung up. I was thinking about what he said, an... Read more

A:Can ping websites but cannot open web pages in Internet Explorer

11 more replies
Answer Match 52.92%

hi,

please help,

i cannot access any microsoft related websites or any antivirus websites but all others (that i am aware of) work fine. I have a macbook but have a dual boot and use my windows xp on the computer quite often. i have no current antivirus on the pc but wanted to install mcafee but i cannot access the site. i have run spybot and also adaware but nothing found. please help!! ive run hijack this and here is a copy of the log file...

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 1:58:05 PM, on 9/15/2011
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\AAWService.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\AppleOSSMgr.exe
C:\WINDOWS\system32\AppleTimeSrv.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\Program Files\Motorola\MotoConnectService\MotoConnectService.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\RealVNC�... Read more

A:cant access microsoft websites or antivirus websites... an i infected???

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!Please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.Click on the Watch Topic Button and select Immediate Notification and click on proceed, this will help you to get notified faster when I have replied and make the cleaning process faster.In order for me to see the status of the infection I will need a new set of logs to start with.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.DeFogger: Please download DeFogger to your desktop.

Double click DeFogger to run the tool.
The application window will appear Click the Disable button to disable your CD Emulation drivers Click Yes to continue A 'Finished!' message will ap... Read more

13 more replies
Answer Match 52.92%

Hello all,
I am new here but have searched around but have only found old threads concerning my problem. I cannot access any microsoft websites or anti virus websites. Any help would be appreciated. I have gone through download.com to use hijackthis. I just re-installed my operating system tonight which is windows xp.
here is my log file
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:29:54 AM, on 7/14/2010
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\Program Files\Intel\Wireless\Bin\WLKeeper.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\IFXSPMGT.exe
C:\WINDOWS\system32\IFXTCS.exe
C:\Program Files\Broadcom\Security Platform Software\PSDsrvc.EXE
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\Program Files\Intel\Wireless\bin\ZCfgSvc.exe
C:\Program Files\Intel\Wireless\Bin\ifrmewrk.exe
C:\Program Files\Apoint\Apoint.exe
C:\Program Files\Broadcom\Security Platform Software\SpTNA.exe
C:\Program Files\Broadcom\Security Platform Software\PSDrt.EXE
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\Program Files\Apoint\HidFind.exe
C:\Program Files\Apoin... Read more

A:Cannot access Microsoft websites or any anti virus websites.

13 more replies
Answer Match 52.5%

Hello everyone, here is my idea. I would like to connect 3 routers to 1 switch hub, where 1 server computer and 10 client computers will connect to the switch hub.

ROUTER A ROUTER B ROUTER C
192.168.1.254 192.168.1.253 192.168.1.252
255.255.255.0 255.255.255.0 255.255.255.0
GATEWAY ROUTER ROUTER
DHCP enabled DHCP disabled DHCP disabled

SERVER COMPUTER, PC#1, PC#2
IP ADDRESS - 192.168.1.250, 192.168.1.1, 192.168.1.2
DEFAULT GATEWAY/ROUTER - 192.168.1.254
SUBNET MASK - 255.255.255.0

PC#3, PC#4, PC#5, PC#6
IP ADDRESS - 192.168.1.3, 192.168.1.4, 192.168.1.5, 192.168.1.6
DEFAULT GATEWAY/ROUTER - 192.168.1.253
SUBNET MASK - 255.255.255.0

PC#7, PC#8, PC#9, PC#10
IP ADDRESS - 192.168.1.7, 192.168.1.8, 192.168.1.9, 192.168.1.10
DEFAULT GATEWAY/ROUTER - 192.168.1.252
SUBNET MASK - 255.255.255.0

All of this will connect to the switch hub. I hope it is not confusing, cause I'm a bit confused myself.

I need help on whether this setup will work, I want the server computer to see all computers and will be able to access them. I am also confused about the DNS server address, what should I address to each router?

In case you were wondering why didn't I get a fat pipe and connect all the computers to it instead I took 3 pipes and grouped the computers into 3 routers. Hmmm... well, I guess it looks fun to do it. I would like to here from you guys/gals before I even start this project.

I am open for questions, suggestions and even criticisms. Thanks in advance guys, I am look... Read more

A:Connecting multiple routers... Help!

12 more replies
Answer Match 52.5%

Hi,

I've got a bit of an intermediate setup which probably isn't going to be long-term but I can't think of a logical reason why it shouldn't work so I'd like to solve it... after all, how do you learn about things if you don't give it a go :-)

I have combined DSL modem & wireless router providing internet access "wirelessly" to multiple PCs at home. I also have a wired router, connected to our main PC, also connected to a NAS HD which I use to back-up music and photos- this wired router has no other connection inc internet. (For info, the NAS HD used to be connected to the wireless router but the bandwidth wasn't high enough to support the large volume of data when I was backing up, particularly when our laptop was being used to go online).

So in summary- the subject PC is connected by wires to a NAS HD via a wired router, but accesses the internet via a wireless router/modem.

My problem is that there seems to be a conflict between the 2 arrangements- I'm a novice when it comes to setting up networks so I may well have missed something obvious! I have ensured the routers have different IPs (wireless 192.168.0.1 and wired 192.168.1.1) but other than that are left with basic/automatic settings. There was a short time when all seemed to be working in harmony, but shortly afterwards only one set of network connections will work at a time i.e. disable the wired network adapter and the wireless connection to the internet works fine; disable the wireless adapter a... Read more

A:Conflict between multiple routers

Sorry for the zombie post, but I was running into the same issue and this thread was the only thing I could find that was similar to the issue I was experiencing with duplicate DUIDs. I just wanted to post a solution here so other people could discover the fix via google as I hoped to.

In my case, I obtained duplicate DUIDs from imaging a Windows 7 machine on Altiris and applying that image to another computer. If you used any back-up system to quickly get two machines up and running (Ghost, Altiris, LANDesk), there is a chance that the registry values that cause this issue were merely copied.

After doing some searches through the registry, I found the following values:

HKLM\System\ControlSet001\services\TCPIP6\Parameters\Dhcpv6DUID
HKLM\System\ControlSet002\services\TCPIP6\Parameters\Dhcpv6DUID

Those strings should contain that computer's DUID. Change the DUID so it matches the correct hardware address. Once you have changed the strings, restart. It should then give the new DUID you assigned it. Hopefully, this works for you.

2 more replies
Answer Match 52.5%

Hi,

I've got a bit of an intermediate setup which probably isn't going to be long-term but I can't think of a logical reason why it shouldn't work so I'd like to solve it... after all, how do you learn about things if you don't give it a go

I have combined DSL modem & wireless router providing internet access "wirelessly" to multiple PCs at home. I also have a wired router, connected to our main PC, also connected to a NAS HD which I use to back-up music and photos- this wired router has no other connection inc internet. (For info, the NAS HD used to be connected to the wireless router but the bandwidth wasn't high enough to support the large volume of data when I was backing up, particularly when our laptop was being used to go online).

So in summary- the subject PC is connected by wires to a NAS HD via a wired router, but accesses the internet via a wireless router/modem.

My problem is that there seems to be a conflict between the 2 arrangements- I'm a novice when it comes to setting up networks so I may well have missed something obvious! I have ensured the routers have different IPs (wireless 192.168.0.1 and wired 192.168.1.1) but other than that are left with basic/automatic settings. There was a short time when all seemed to be working in harmony, but shortly afterwards only one set of network connections will work at a time i.e. disable the wired network adapter and the wireless connection to the internet works... Read more

A:Conflict between multiple routers

8 more replies
Answer Match 52.5%

I am currently running an all wired ethernet network here in my home. The cable comes into my house in the basement. At this location sits the cable modem and my firewall router, a D-Link DI-604.

I want to add wireless to my home, and have been considering getting a 802.11g connection. I would like the router/access point upstairs on my main floor. To me, the logical device to buy is an access point that is wired into my current ethernet network. However, all the access points (AP) I have seen have been more costly than a wireless router.

If I purchase a new wireless router, can I plug it into my wired network upstairs, which ultimately is plugged into my DI-604 downstairs? If this is possible, I'd assume that these act as two individual networks. Is this true? I want to be able to share a printer and shared folders on my Windows boxes. If they are indeed two networks, how can my wired PCs see my wireless PCs inside the other network? Can I turn off the firewall features of the wireless network?

Could anyone offer advice? Thanks!
 

A:Multiple routers on same network?

7 more replies
Answer Match 52.5%

1. 2 wire - 2701HG-E modem
2wire.com/index.php?p=106

2. 2 - Belkin FSD8233-4 Wireless N Routers
tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3173668&CatId=2668


Ok, what I have is a resturant who has ATT dsl with a 2 wire modem (don't care about the wireless apart, to far to be effective, would like to disable it).

They would like to have wireless internet for their customers in the dining room so i ran a cat 5e line from the modem to the first Belkin router and everything works fine. Its an open connection so anyone can come in and connect with their laptop.

From there i ran from port one jack to another Belkin router also in the ceiling for the owner. She wants this one to be secure so no one can access her files or laptop. I put this one as "access point" and secured it with a 128 bit wep key. Now for some reason as an acces point i can connect with my laptop using the network key, (i'm using xp) but we can not get her laptop (vista) to connect. It sees the signal when you "veiw availble wireless connections" but it won't connect.

Strange thing is, when i use that router (#2) as a regular router instead of an access point we can all see it as available but no one can connect, not even me.

This lady is very nervous about her signal and wants her part to be secure, she even had me hook up her all in one to the secured router so she could print/fax wirelessly over her secured router.

Any ideas... Read more

A:Multiple Wireless Routers

Disable the wireless part of the 2wire and have it just act as a DHCP server through it's switch (I assume it is also a switch). Connect the belkin routers to your switch (2wire) with a cat5 cable. Set both belkin routers as access points with different ip's (you might have to do one at a time if they share the same ip) and have them use the same SSID and different channels. I know this works with two routers of the same type/brand.. not sure if it will work with your setup.. As far as people accessing your laptop files all you have to do is turn file and print sharing off on that particular pc/laptop and will not even show up when you browse the network.. If you need to have file sharing on you could set the appropriate permissions when you share a drive/folder so that only certain people (your boss) can access it as well as require a password for access. This way anybody can connect to the wifi without a password and no one can access your laptop. There is no way to gain access of her laptop if file sharing is turned off, not only that if if it is XP or later it will have a firewall built in to prevent exactly that.

Edit: You might not even need the second belkin if your laptop is within range of the first belkin and if that's the case you might just be able to use the 2wire. I dont know the distances you are dealing with.
 

1 more replies
Answer Match 52.5%

Hi all,

I am trying to connect together two identical Netgear wireless routers (WGT624 v3) to extend my network. This is what I have so far...

A Virgin Media modem connected to Wireless Router 1. Also wired to the router is my Main PC. This router is currently configured to enable wireless access. From this I have installed a cat5 cable to wireless router 2 which is downstairs.

To this router I would like to connect an XBox, a Wii and another PC. All devices will be wired and I'm not bothered about using the router as a wireless access point.

I have disabled DHCP on the second router and switched off wireless access. I've also given router 2 an ip address of 192.168.1.2 still no joy - can anyone advise?

Thanks in advance.

Chris.
 

A:Solved: Multiple routers...can it be done?

12 more replies
Answer Match 52.08%

I'm trying to set up a wireless workgroup at home and am wondering if I'm doing it right so far. Here's how I have it configured so far....maybe someone can tell me if I'm on the right track:

1. 1 DSL modem/4 port switch/wireless capable(IP 192.168.1.1)(DHCP with range from 192.168.1.10 to 192.168.1.100) with a hardwire from one of the ports to the Internet/Uplink port on a linksys 4 port/wireless router(IP 192.168.1.2)

2. First router on channel 1, second on channel 6

3. Both have the same SSID

4. Both are WEP enabled with the same key

That's all I can remember for now. I'm trying to have seamless crossover when moving away from one router and getting closer to the other. Also, will I need to configure anything on the routers to have File and Printer Sharing work? I have read that NetBIOS has some issues with using multiple wireless routers.
 

A:Configuring multiple wireless routers

I'd make them different SSID's. You can put both of them in the list of preferred connections. That's how I run my routers, but I use WPA here.
 

3 more replies
Answer Match 52.08%

OK so right now we are running a Comcast Gateway with a Netgear router attached to that. Right now we are able to access everything we need to, wireless internet works, can access the server, can access the server remotely...but there are a few problems.

Let me preface by saying I'm 99% sure things are hooked up how they are supposed to be hooked up.

Here is how things are setup/configured:

Cable connection running to the Comcast SMC gateway, this box has 2 pc's hardwired into it and the router. The Comcast box has DHCP enabled.

The Router is obtaining a static IP from the Comcast gateway and has its connection running from the WAN port to an open port on the router.

We have 1 pc and an office printer hardwired into the router and several laptops running off of the wireless.

DHCP is also enabled on the router.

The problems were having are probably obvious to the people here but some of our machines are getting assigned 10.1.10.* IP's while the router is assigning 192.168.1.* IP's. I've tried to disable DHCP on the router and then we are not able to connect anything wireless or the computer hard wired into the router.

We've tried disabling DHCP on the Comcast gateway and run into a similar problem with losing connectivity on the computers plugged into the router.

Ideally what should we be doing here? I'd really just like to use the Comcast gateway as a means to the internet only and run all of our PC's and wireless through the... Read more

A:Networking questions, multiple routers

To have everything on the same LAN keep the Comcast modem/router as is but use the Netgear as only ethernet switch and, optionally, wireless access point per the following procedure.

JohnWill's procedure (Aug. 30, 2008) for configuring a secondary router as a switch and, optionally, wireless access point follows.

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cro... Read more

1 more replies
Answer Match 52.08%

Hello to all. I think this may be a general network question, but as I use Vista...

So... I have this network with a switch and two routers. The routers are connected to the switch. I connect a laptop directly to router B (i.e. not to the switch), because router A is meant to be used by other PCs. The network activity icon shows that it's connected to the network from router B, but when I run "ipconfig" in the command prompt, it shows the default gateway etc. from router A!! More specifically, it should show 192.168.1.254, but it shows 192.168.1.1. How can this be??

Thanks in advance.

A:False gateway with multiple routers?

The router gateway in virtually all routers has the last number in the IP address set to 1. Have you modified the settings in router B somehow so that the gateway is 254?

Ed

2 more replies
Answer Match 52.08%

I have a DSL Gateway modem that we use to connect to the Internet. I then have a NetGear MR814V2 that we use to connect 4 computers via wire and a couple via wireless. I would like to be able to add another router/switch to support 4 more computers. I know that I could buy a router/switch that supported more connections, but we already have the other router/switch (NetGear RP614), and it would reduce the wiring I would need to do. I have been unsuccessful getting computers that are connected to the first router/switch to be able to talk to computers connected to the other router/switch. Everyone seems to be able to see the Internet fine, just not each other.

What do I need to do to accomplish this?
Thanks!!
 

A:Multiple routers/switches in network

6 more replies
Answer Match 52.08%

I hate to ask what is probably a simple question, but after days of forum searching and hours upon hours of tweaking I still can't make this work.

I have a:
Dlink di-704 gatway with an ip: 192.168.0.1
Netgear WGT 624 Wireless router ip: 192.168.1.1
Linksys WRK 546 Wireless router ip: 192.168.1.1

Currently I am only using the Netgear wireless router, set up with a static IP address from my ISP, using one of the LAN ports for a Dell server which is for storage and set up for FTP use so I can remotley upload/download files.

I am wanting to use the Dlink as a gatway, connecting the Netgear/server for business use, and connecting the Linksys for a 'guest' wireless access point so clients can access the internet without seeing the Netgear/server.

Cable Modem
|
Dlink----------------------
| |
Netgear Linksys
|
Server

You name it, I've tried it, and I can't get it to work
The last thing I tried was setting up the Dlink with all of the correct static ip info, which worked because I can access the internet. I then turned off the DHCP on the Netgear and tried to change the LAN from 192.168.1.1 to 192.168.0.100 (the ip range the DLink gave me was from 100-199), but it didn't work. I can't even log back into the admin page of the Netgear using the 192.168.0.100-I have to reset it and start over. I've tried connecting LAN to WAN, LAN to LAN..nothing. Haven't even attempted the Linksys because I can't even get the Netgear to work lol... Read more

A:multiple routers/gateway config

First off, you would have the guest computers connect to the router connected directly to the Internet feed, and the secure connections on a router daisy-chained off the primary router. This protects the secure connections using the NAT layer of the secondary router. I have no idea what you plan on doing with the 3rd router.
 

3 more replies
Answer Match 52.08%

I have two Netgear routers (N150 and DG834) and want to set them up so that in my office (external to the house) I have wired internet connection and in the house wireless, the office is too far away to run the wireless for the house there. The router in the office is connected to the ADSL line with the router in the house connected to it via a network cable.

I have disabled wireless on the office router however when i try to run both routers together I get an IP Address Conflict, I know I need to change the IP address so that they don't conflict but when I have tried this it hasn't worked and I have had to reset the router to the able to access it.

Any advice and / or solutions would be gratefully received.
 

A:Network Multiple Routers - IP Conflict

If you are cascading the routers (LAN port of first connected to WAN port of second) they have to use different LAN subnets. Since they both probably default to 192.168.1.x change one of them; for example, to 192.168.3.x).

If you want the office and house devices to all be on the same local network connect/configure as follows.

JohnWill's procedure (Aug. 30, 2008) for configuring a secondary router as a switch and, optionally, wireless access point follows.

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router'... Read more

1 more replies
Answer Match 52.08%

Hey All,

I have a question regarding extending my wireless network throughout my building.

I have on hand three Linksys WRT54GL wireless routers and am wanting to use all three to expand the coverage area of my signal.

What I am thinking is, using the latest firmware from Linksys, hard wiring the cable modem to the main router and then configuring each of the other two routers with a different IP, placing them a distance in either direction from the main central router. It sounds logical on paper, but can it be done?

If so, can anyone walk me through the process, or at least direct me to a link where this process is explained in detail?

Any help would be greatly appreciated
 

A:Using Multiple Routers to Extend Signal

6 more replies
Answer Match 52.08%

Guyz I am having some real issue right now, after introducing a new Wireless Router for the conference the current network suddenly gone bad (Internet running slow, and won't work in some case - but if I disconnect/unplug the new Wireless Router everything is back in business)

Here is my network infrastructure.



The weird things is I got very good signal from New Wireless Router and able to ping most sites but having problem with browser won't loading the page. Also old network tense to lose it connectivity sometime able to use the net and some other time it won't and like I had mention before if I disconnect the new Wireless Router everything back to normal. The real question is, what did I do wrong please help me
 

A:Network trouble with multiple Routers

With that topology (wiring), I would make sure both wireless routers were
at the opposing ends of the channels; one on channel-1, the other on channel-11.

Set different SSIDs

Make sure ALL routers have the latest firmware
and ALL systems do too. It often makes a difference.

How many systems are on the downlink side of the HUB? You might find
better thruput and more reliability by using a switch.

Hey! Just noticed that the new wireless is attached to the modem-- what gives,
Don't tell me one is via rj45 and the other is USB; this doesn't work!
Move # 2 router to a lan port on router #1,
wireless#1(lan) --->wireless#2(lan) not the WAN!
make it an Access Point and disable DHCP on #2
 

15 more replies
Answer Match 52.08%

So I have several computers behinds a Linksys router. I would like to access each computer through the outside by adding another name as a network prefix. Let's say each computer would be designated as Mouse, Cat, and Dog.

Take SSH for example. I would want to SSH into one computer using port 22 by means of ssh [email protected] and the other by ssh [email protected]. I know I could just use different ports for ssh and have them be forwarded to the different computers with the router and achieve the same effect, but I was wondering how I would do it this other way.

How would this setup work? Does it use a DNS server?

I know I can access different machines on my school this way, but I was curious on how this is actually implemented and if I could do it on my home network. You don't have to give me specific details, just a general direction into what I can research.

Thanks so much.
 

A:Connecting to multiple computers behind routers from the outside

7 more replies
Answer Match 52.08%

Hello,

I have what I consider a very basic understanding of networking. I work for an IT solutions provider and a restaurant chain which we support needs to fix a PCI compliance issue. The network at the location was put in place a year ago with little documentation. My goal is to move a DVR device for CCTV system away from the PoS machine, because the DVR requires a port open which is not good for PCI compliance if both are behind same router.

I apologize for ignorance or lack of any details you might need to help me, if there's some info I need to dig up,I'd be happy to find it. I'm in a rough spot trying to fix this. This is how they are set up.

They have a bridged modem which is the first thing that the DSL line comes into. My impression is that the proper way to use multiple routers with a bridged modem is to have a "main router" which will be the director, if you will. All the other routers should then plug into that main router, as opposed to having multiple routers plugged into a bridged modem. I've confirmed that for whatever reason, TWO Linksys Firewall Routers are plugged into this bridged modem which is a Netopia. Again I apologize but I don't have the model numbers. This brings me to my first couple of questions.

1. If two routers are plugged into the same bridged modem, how would they behave? Wouldn't they be fighting for control to be the "main router"?

2. Is it possible to set u... Read more

A:How to use bridged modem + multiple routers

One thing I noticed from reading your post was that the problem you are trying to solve (not having the port opened to the DVR on the same network as the PoS) would not be solved by placing router C behind router B. You would still have to open the port on router B to allow it to pass to router C. Wouldn't this be the same as opening the port in router B to allow it to pass to the DVR (if the DVR was connected to router B)?

As far as the issues with AT&T, you can only program the IP addresses that they assign to you in the routers. They should be able to tell you how many IP addresses are assigned to your customer. If you have a router behind another router, only the one connected to the modem would have an IP address from the ISP.
 

12 more replies
Answer Match 52.08%

Hi Guys!!
I recently started working for a company that lost their IT person, and until they find someone much more qualified than I, I have agreed to help where I can. I am the most tech-savvy individual working here, and that is really...really sad.

Currently I am having an issue with three Linksys routers. They are being used as access points to distribute a WiFi network spanning the entire store. The routers all broadcast the same SSID and have an IP address of 192.168.11.xxx

I can connect to these routers, but am unable to access the internet. There are other routers of different makes and models broadcasting their own SSIDs... but also use the 192.168.11.xxx scheme.

Only ONE router using the 192.168.11.xxx address has Internet connectivity.

The former IT employee has no desire to share information or be contacted. I am trying to figure out what they were trying to do...and how to fix it.

Any ideas or advice to point me in the right direction would be insanely appreciated
 

More replies
Answer Match 52.08%

Hi Everyone,
This is my first post !
I was actually looking forward to setup multiple routers at our college(I know its quite late) where we have quite a good network of ethernet cables. Also, almost every cluster/lab has its own switch and we use static IPs with proxy to one network address(192.168.130.2). The user should be able to travel across multiple ROUTER/AP zones without changing connections.
I am sorry if I ask too much but after searching for several hours, all I got was I have to do something with MAC cloning and SSIDs.
Thanks,
Shalabh

<Email removed by moderator - ETAF>
 

A:Setup multiple wireless routers

8 more replies
Answer Match 52.08%

I am trying to access home security camera from outslide my house.

I have an AT&T internet coming into the house. They have a router that comes into the house and that splits off to another router in my house which carriers CAT5 all over the house. One of the wires go to another router that I use for my wireless devices. One of those wireless devices is an security camera.

Here is my question. I want to view the camera from the internet outside the house. I have followed the instructions given by the manufacture for port forwarding. I have port forwarded the wireless router since the camera is connected to it. Is that wrong since the DSL is coming in one router and then going to another and then to the wireless? I guess I am just trying to find out what is right way to make this work since the way I am doing things now does not seem to be working.
 

A:Multiple routers and port forwarding

Are you sure the second one is a router and not a switch? What is the need for so many damn routers?

Once you port forward from the router with the security camera try and access it on your LAN behind the second router. You will have to set up port forwarding on all routers that are gateway devices.
 

2 more replies
Answer Match 52.08%

Hi all,

Would like some advice / idiots guide if possible to setup the following:

I would like to have two separate networks running at home (192.168.0.XX and 192.168.10.XX) which are completely separate from each other, bar the ability for both to have access to my ADSL internet connection.
I would like one network to act as a ‘Dev’ network (where I might plug client machines into etc) and one as my main network.

So effectively I will have one network which is my main home network (running on 192.168.0.X) which all my home machines etc run on and have access to my main router or gateway to the internet (Gateway IP is: 192.168.0.1), and I will also have a seperate ‘Dev’ network (running on 192.168.10.X) which I can plug any PC / laptop etc that I am working on, into which won’t have network access to the other 192.168.0.X network for security purposes, but will have access to my ADSL gateway so they get internet access (like the other network).

Is this possible? And if so would someone please be able to give me a walkthrough on how to setup it up?

Current hardware is:

Main gateway router: Netgear DG834N on IP 192.168.0.1
Wifi access point: Netgear WNR3500 on IP 192.168.0.125
Spare (unused) router to work on the ‘Dev’ network: Draytek Vigor 2600 IP (to be confirmed) 192.168.10.1

Is it possible to do the above with my existing hardware? (I.e. not have to go out and purchase some expensive equipment)

Many many (many) thanks to any kind soul that is able to help.
&... Read more

A:Multiple home routers and Subnet help

12 more replies
Answer Match 52.08%

Techrepublic has a nice description of supernets; a means to add network devices
without the necessity of extra ROUTE ADD configurations (which does not work in XP/Home).
From Techrepublic: Why would I want to use supernetting?
ISPs frequently use supernetting to allocate IP addresses most effectively. There may be scenarios where you have many LANS, WLANs, or VLANs that might be optimally suited for supernetting to best administer your network needs. Keep in mind that supernetting introduces complexity to network administration that needs thorough planning, testing, documentation, and administrator competence.

Most new routing equipment and current operating systems support CIDR in their implementation of the TCP/IP protocol. However, before a supernetting implementation, it is critical to ensure that all components of your network are supernetting-aware. This includes operating systems, network services, routers, routing protocols (RIP2, for example does not support CIDR), and any network-based services used on your network.​
While the usual 254 devices are sufficient for most of us, the assumption is there's only one router.
Adding multiple routers is wasteful UNLESS there's a specific need, such as adding wireless support
to a wired network (another alternative is an Access Point).

The advantage of a second router is grouping devices and controlling access
via firewall rules;
eg You would very much like to protect your wireless subnet... Read more

More replies
Answer Match 52.08%

I am in the process of planning multiple wireless routers for my church complex. My question is "not" how to setup up multiple wireless routers. I want to know before I start can I place a properly configured multiple wirelesss router on a on/off switch to shut off the AC power. I only want some of routers to be be used for special occasions and mostly be turn off.

I will not be there when they are needed so all I want is someone to do is turn on the power by flipping a switch. And the unprotected wireless signal would be available. When finished for the sure period it will agin be shut off. Will the wireless router maintain the correct configuration.
 

A:Shutting off and on multiple wireless routers

9 more replies
Answer Match 52.08%

My apologies if this is in the wrong section, I am still not clear on whether this is a networking issue or a Windows issue.

The Issue:

I have a few websites that I haven't worked on in a while, maybe 6 months. Recently I tried loading them and get nothing, sometimes it will be a blank white screen or connection error message. I spoke to tech support at my hosting company and was told both sites are live. They mentioned that maybe my IP was blocked but that wasn't the case. I can get into my wordpess dashboard but can't see any of the edits I make, the pages won't load. On my laptop I have a good internet connection and everything else loads fine. I tried another laptop on the same wireless network as well as my phone and the sites load fine. I am not really sure what happened but I really need to get a solution for this problem so I can my sites redone and up and running again. If anyone has any insight as to what went wrong I would be greatly appreciative.

Notes:

-My computer is an HP Pavilion with Windows 8.1 Unfortunately I can't find any information on the model number. The laptop is connected to a wireless router and this in my home, not a work network.

-I tried using another router and IP address and still couldn't get the sites to load. Reset both routers and restarted my computer as well without success.

-The sites don't load on any browser, FF, Chrome, Opera or Safari.

-I have flushed and changed the DNS, ran spybot and hitman pro and it still... Read more

A:[Need Help] My websites won't load on my laptop but will on other devices on the same

Someone with specific experience with this will probably post here. In the meantime, I'd be looking at Wordpress as the problem source.

1 more replies
Answer Match 52.08%

Hi there
i am looking for software the routes different websites to different network devices

i have tethered my phone to my computer for Facebook at work, witch is blocked, and the work internet for everything else, how do i route Facebook to go through my phone and other stuff to go through the work net, automatically, without having to connect and disconnect network devices

thanks, bdman32

A:how do i route different websites to different network devices

I don't you can really do that...the closest you can come to a solution would be to use a web proxy or VPN software to go around the Facebook block and access it through your work Internet. Mind you, if they discover a VPN connection they won't be happy at all - so I'm not actually suggesting you do this.

3 more replies
Answer Match 51.66%

Ive had this problem before and I know its no good. Last time however I had to format my whole computer because I didnt have any time to take it off and my internet providor forced me to format my computer or not get the internet. If it happens again they'll cut my internet permanently.

So to my Problem: Whenever I try to access Microsoft of a antivirus website (AVG, norton, malwarebytes.org, etc.), I get a a "the page cannot be viewed" message.

It was working this afternoon when I was trying to download IE6 onto my computer when it said I need to install SP3 for XP and install all these automatic updates. I however cancelled this an hour later because it was taking very long and I had time constraints. and I tried a few hours later and it didnt work.

Im running XP with SP2 and I have MBAM on my computer and also AVG but I dont think its working properly (i.e. it doesnt come up on the system tray)

Any help is greatly appreciated.

A:I cannot access Microsoft websites/antivirus websites

I have the same problem. Any luck?

1 more replies
Answer Match 51.66%

Hi, I hope I have posted this in the right forum, apologies if I haven't. Here is the problem I'm having.I bought a HP ENVY 17t just over a month ago. For the first week, 10 days, everything was fine, I have a good internet connection with TWC and the wireless modem/router I got was perfect.Then I started to notice that I could not access some of my usual websites. I would type in the URL press enter then wait, and wait..... as opposed to just a day or so previously when I reached tte site instantly. Some of the sites would eventually, after a minute or so, some longer, appear, but then not completely, the graphics (pictures) were missing, links on the side of the pages were not there.Initially I had thought that it was a problem with my internet connection so I called TWC. They checked at their end and then checked the modem/router, and pronounced that there was no problem with the internet connection. And sure enough, when I tried to download files from the office, I had no problems at all. I could access the servers and download large files without a problem, as fast as I did before the problem started.I then called TP-Link. My Modem router is a TP-Link Archer CR700. I thought that there might be some kind of intermittent problem. They too checked everything with the modem, had me run some tests, and while the modem worked perfectly, I still could not access an ever increasing number of websites.Just on a hunch I went online with my Samsung tablet, and I had absolutely no ... Read more

More replies
Answer Match 51.66%

Our ISP recently updated their hard ware to work with the Sprint network. Note: our ISP is not Sprint, but the local phone company.

Our Hardware:
Internet: DSL 10.0 (highest speed available)
Modem: Comtrend (ISP provides)
Router: Belkin N
Computer: 10 yr old Dell running XP - service pac3 - wired connection
Kindle Fire (first edition, no HD, etc) - wireless connection
Xbox 360 - wireless connection

Issues:
Xbox - went from constantly bumped from Xbox Live game by losing internet connection to not being able to enter a game at all
Kindle - went from occasional "network error' message during online tasks to having to restart download (multiple times) or refresh page for most any or all online tasks
Computer - have to click refresh to get most any page to load after the home page

What we've tried so far:
I have recently cleared the cache on both the computer and Kindle. XBox's new security measures have been met.

My questions:
Do any or all of these issues seem to be related?
Is there a piece of equipment or something we may be missing to make all of these things work? I am a networking novice.
Who should I call to get these issues corrected, my ISP or a tech service? Note: if I start with the ISP and they do not find an issue I have to pay for the call.
 

A:Multiple issues over multiple devices

First. You should try to NOT use a wireless connection for any type of gaming: PC, Mac, Console, etc. If you can hard wire the xbox you'll be waaay better off than using wireless.

Now... Yes, the issues could be related - there maybe an issue with the Belkin N router. I'd try to first reset the Belkin router to default settings, check on manufacturer website for instructions how, most routers you can press a "reset" button w/ a paperclip or ball point pen. Reconfigure the Belkin router, recreate the wireless network and see how everything works. If you are still having issues, humor me and connect the Dell directly to the DSL modem, bypassing Belkin router. See if you still have connection issues, if you do then it could be the DSL modem that is the problem and call your ISP to replace. If you don't have same issues then it's most likely an issue with the Belkin router. Replace it. Don't buy the dirt cheapest router at the store, but you most likely don't need the most expensive one either. Find a good middle ground router, ask sales associate to assist you accordingly.

Post back, Hope this helps!!
 

1 more replies
Answer Match 51.24%

OK I am setting up some cameras and want to make sure I am going about it correctly.

Here is the layout:

Cable MODEM
|
|
|
------------------linksys1 (ports forwarded to linksys2 IP & SFE1000P-(2) IP)---------------
| |
| |
| |
linksys2 (ports forwarded to SFE1000P IP) linksys SFE1000P(2)(ports forwarded to camera IP's)
|
|
|
Linksys SFE1000P(1)
(needed ports forwarded to camera IP's)
The IP's of linksys 1 & 2 are widely know from the factory so I had no trouble accessing the setup pages and doing the port forwarding but the SFE1000P is set to a dynamic IP from the factory. How can I find that address so I can access the setup pages to finish the port forwarding? Should I connect my laptop to the SFE1000P and just have the linksys1 and the modem connected and run a network scanner?? Like I said I think I have this correct but just want to make sure. Thanks for any help

James Bond 007
Universal Exports
 

A:port forwarding with multiple routers and switches

Any router in front of the first one should be configured as a switch, plug only into the LAN ports and turn off DHCP, otherwise you are just asking for headaches. Then do all your port forwarding from the router directly in front of the cable modem.
 

3 more replies
Answer Match 51.24%

Ok so here is the issue that I ran into. In my home I originally had just a wireless belkin router connected to my comcast modem which was an access point for 4 wireless computers and one wired computer in my office, I have just recently started using windows 7 on all my computers here and I wanted to set up a homegroup so that I can share music and movies throughout the house from one computer in my office. Now the issue is that I added a second computer to my office to use as the storage for all my media but to do that I needed to add another router which is not wireless. I have the second router running off of the wireless router to add more connections in my office and not have a bunch of wires running through the house. The problem now is that when I create a homegroup from the computer connected through the second router it cannot see any of the wireless computers that connect through the first(wireless) router and vice versa. Is there a solution for this problem or am I stuck with having to run all wired and wireless connections from one router? Please help as I am stuck here and I want to move forward with my HTPC project without having all the external drives cluttering the downstairs living room as I am expecting a child in a few months and want as few things as possible in reach of those little hands.

Thank you in advance,

Dragonschild

A:Homegroup with wired/wireless and multiple routers

Can the computer connected to the second router get to the internet? Can you describe how you have the 2 routers wired together?

5 more replies
Answer Match 51.24%

Hi there! I am new to the board and hoping someone can help me.

I belong to an Online Record Pool, and go to the website to download music often (yes it is a legal thing and I do pay money for it).

Before setting up the router on my system, i was always able to start and download up to 10 files at one time. Now, I have a cable router here and I can only seem to get 2 downloads going simultaneously.

Does anyone know how I can get myself back to where I was? I am using a Linksys BEFSR81 ver. 2 Cable Router. Linksys suggested playing with the MTU settings, but this does not seem to change how may downloads I can peform at one time.

Thank you for the help!
 

A:[SOLVED] Cable Routers and Multiple Downloads

Increase Internet Download Connections

Increase Simultaneous Internet Download Connections
Increases the number of allowed simultaneous connections to ten (10).
[Start] [Run] [Regedit]
Registry Key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings

Modify/Create the Value Data Type(s) and Value Name(s) as detailed below.
Data Type: REG_DWORD [Dword Value] // Value Name: MaxConnectionsPer1_0Server
Setting for Value Data: [0000000a]
Modify/Create the Value Data Type(s) and Value Name(s) as detailed below.
Data Type: REG_DWORD [Dword Value] // Value Name: MaxConnectionsPerServer
Setting for Value Data: [0000000a]
Exit Registry and Reboot
remember backup your registry before trying this.
 

3 more replies
Answer Match 51.24%

Hey guys,

I'm very new to networking so please forgive my lack of understanding!

Recently moved into a mates house, the router for the Internet is a Netgear Super G and manages to transmit a pretty good signal to most of the house - apart from my room at the other side of the house.

Now, I also have the same router (Netgear Super G) and was wondering if it was possible to use this to boost/spread the signal to reach my room?
The router has one modem input and 4 Ethanet cable sockets...

Any help/tips would be greatly appreciated!

Thanks,
James
 

A:Using multiple routers to boost/spread a signal

I don't consider networking my strongest point.

But I'm pretty certain you can't if anything they would probably knock each others signal out (if they're on the same channel).

There are signal boosters you can buy but they're not very good either, if you want some extra speed out of your wireless I would advice getting a "N" router, it's one up from Super G but you need an "N" adapter for your computer as well.

Hope this answered your question.
 

12 more replies
Answer Match 51.24%

I have 3 computers in our home network. My computer is in our bedroom with Vista OS which is connected to a USRobotic router that connects to the cable modem. From the USrobotics router there is another network cable that runs down to the basement to a lynksys switch, where a computer with XP Pro is attached(hopping to change it to Linux OS and make it a server) from that switch another cable runs to the garage to a lynksys router that runs a cable to a spare bedroom connecting compact machine with XP home edtion, that has a printer, copier connected to it.
I would like to access that printer from the other 2 computers.
How do I configure the routers to do this? and maybe the switch too.
Thank
Ron
 

A:home network printing with multiple routers

13 more replies
Answer Match 51.24%

I know that you can stack linksys routers on top of eachother and have them all set to recive a IP address from the main one. But is this possible with wireless routers? I have 2 linksys wireless routers and i want my setup to be so that both can be wireless at the same time. At opposit ends of the house this should give my fairly large house a strong signal all around. But how would i do this with wireless? Would problems occur like setting the same SSID for each seperate router? Would this create 2 seperate SSID's to connect to?

The reason why is because instead of spending the money for a range extender, or higher gain antennas. I could use this extra unused router.
 

A:Multiple Stacked Linksys Wireless Routers

6 more replies
Answer Match 51.24%

I am probably making this more compicated than it is, but here goes:
(picture with 1000 words) Here is what I am trying to accomplish, but I am abit confused by all the various settings, WAN, LAN, Subnet, etc...

Any help / guidance would be appreciated.

 

A:Solved: Network Setup w/Multiple routers

You can either configure the Netopia 2210N into bridge mode and use the WRT54G as a standard router connected to the WAN port of the Linksys, or configure the WRT54G as a WAP.

In any case, you'll want to configure the Linksys BEFW11s4 as a WAP using the following configuration. This applies to the WRT54G as well if you decide not to bridge the Netopia.

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the ro... Read more

3 more replies
Answer Match 51.24%

I have an existing network with Verizon FiOS that has the router built in to the modem. We have 3 computers hooked to that network....2 wired, 1 wireless.

I have a server machine that I am using to practice for my MS certification exams. I have Windows Server 2003 installed. It is an Active Directory domain controller,with DNS and DHCP.

I also have an old laptop with XP Pro.

Neither of these are on our existing network. My goal is to connect these 2 machines to another router (with wireless capabilities turned off) and then connect this router to the existing one to provide internet access to the new machines.

I want the server to operate as DNS and DHCP. I do not want the router(s) to do it.

So, the existing router (FiOS) has an IP of 192.168.1.1, and it gives IP's to the 3 machines connected to it. This is fine, but when I connect the server and XP machines to the new router, I want the server to give out IP addresses, not the router. I also want to be able to join the XP machine to the AD Domain on the server so I can start playing with RIS, and assigning permissions....and all the other stuff I need to learn for my exams.

Existing router: Actiontec MI424-WR
New router: Netgear WGR614 v10
All computers are XP Pro except for the server and one Windows 7 Ultimate laptop.

Does anyone know how to do this and make everything work correctly?

I hope I've given enough information

Thanks in advance for any help!
 

A:Network with 2 routers, 1 server, multiple clients

You can have domain running in the home with the equipment you have posted above. I did that here myself. You need Windows client OS that supports domain. Pro series does. Server 2003 has NAT feature and can be your router using additional network card. One Card would be labeled WAN and the other would be called LAN. This can be connected to a 5/8/16/24/48-port switch or even add AP to the mix. So it would be modem to Server to external switch. Having the Server with DNS, DHCP and Active Directory active plus the NAT works great. Take some time to get it all working though. For extra SPI hardware firewall I had use one of those belkin wireless turned off wi-fi, DHCP then connected the server LAN to Belkin then back to the switch. This is optional don't have to do this just saying that's how I did it.

Or

Use a wireless router connect only server to and use external switch from the router to your other network devices. This is another way to do with on domain. Doing this way you don't need to install another Nic card in the server box.
 

11 more replies
Answer Match 50.82%

I've been using the Belkin wireless G router for various wireless networks I've setup due to it having a very useful feature: multiple security passwords.

One password gives full LAN access to wireless connected computers.

The other password, the "guest" password, allows wireless access to the Internet only. This functionality would have solved this user's issue perfectly.

Anywho, does anyone know of any other brand of wireless router that offers this kind of functionality? I'm no longer interested in Belkin products, due to an absolutely horrendous support issue I had with them, so I'm looking for another wireless router brand to start using.

Thanks!

Peace...
 

A:Solved: Looking for wireless routers with multiple security passwords

11 more replies
Answer Match 50.82%

I work at a small school where all teachers take on ancillary roles, and mine is as the lead tech teacher, which mostly involves providing support and training for applications and instructional technology. Our school has multiple buildings, constructed of concrete block, wood and stucco, most of which only contain 2 classrooms each. All rooms are wired for internet access. I have been using a wireless router in my room for several years so that I can do presentations from my laptop with a projector in the middle of the room. We now have several laptops, and have received funds to make the entire campus wireless. I've been asked to handle this. My question is, should I put in several routers, or just one with a series of repeaters? The wireless connection would be strictly for internet access, not for creating a network of connected drives, printers, etc. Currently, only the computers in the computer lab are networked together, though we do occasionally have a problem with one teachers documents appearing in another teacher's printer (I suspect this is because the printers all have the same name?)
 

A:multiple routers or repeaters for creating a wireless campus?

8 more replies
Answer Match 50.82%

Hey guys,

First of all, let me introduce myself as I am new to the forums. My name is Max Paine and I work as a network technician for a local car wash chain.

I've finally reached a point in my life where I've come across a problem I cannot solve and need help with. The car wash I work for has multiple internet devices. The main internet signal comes from a Verizon DSL router with a static IP. Now, I had a Linksys E1200 running in DHCP mode attached to the primary router and it was working fine. I also had a ethernet cable running up to the office on the other side of the building from the E1200 to another E1500 (Linksys) and it was serving the other side of the building. They were all working just dandy until the other day when the E1500 started losing connection and gave every internet page I tried to go to on my front office computers a DNS error.

Now the E1200 is not working either and doing the same thing. I've tried calling Linksys, Verizon, everyone to no avail. I've tried DHCP mode and Static IP mode on all routers but nothing comes of it.

Basically what I'm asking is how can I cascade these routers to basically chain them together and let them all have internet access?

Thanks!
 

A:Baffling networking question: Multiple routers in one network

When you daisy chain routers they should have different LAN subnets. I say "should" instead of "must" because in some cases you can get away with having them the same, at least for a short while.

The Linksys routers probably both default to 192.168.1.x, so one should be changed (e.g., to 192.168.3.x). And make sure that the Verizon DSL router and Linksys E1200 are using different LAN subnets.
 

1 more replies
Answer Match 50.82%

My house has DSL net running first through a 20-port switch with internet jacks running all through the house. Plugged into one of the wall jacks is a Linksys wireless router. Printer and file sharing works between all computers connected to the main router, but I haven't been able to use any laptops wirelessly connected to the net for networked printing or filesharing. Is this possible?
 

A:Solved: printer/file sharing on multiple routers

11 more replies
Answer Match 50.4%

Hey guys, awesome site and thanks for the help in advance.

I have kind of a strange situation with my wireless. I have a modem and wireless router on my top floor, and I am trying to get internet access to my xbox 360 without buying the wireless adapter if at all possible.

Two things I want to know about, Internet Connection Sharing and multiple routers. I am not sure if the multiple routers is a possibility, but I know Internet Connection Sharing used to work, and no longer does now. So,

Internet-> Modem-> Wireless Router-> Laptop (Vista)
1.) I have a laptop connected to my wireless, and plug it into the xbox with a network cable. When I first got it, this worked perfectly after I simply enabled Sharing in the connection settings. After I reset the modem and router for some other stuff, it stopped working. ICS is still enabled in settings, and my xbox fails finding an IP address for some reason.

I tried the settings on automatic and it does not work. The xbox has an option to input custom settings like IP, subnet mask, gateway, DNS 1/2, and MAC stuff.

What could be stopping the ICS from working like it did before? What settings should I input and what steps should I go through?

2.) I have an extra old wireless router laying around... Can you connect a wireless router to the internet through wireless internet? Or can I share the connection from laptop->2nd router->xbox?
ICS sounds like the easiest option because it used to work with the same setup I have... Read more

A:Wireless Problem... Internet connection sharing or multiple routers possible?

Forget ICS and just bridge the two network connections on the remote box that is connected to the XBOX. It's much simpler and it will eliminate the NAT layer of ICS from interfering with the XBOX connection.
 

3 more replies
Answer Match 49.98%

Good. How are you? I hope well, well my problem is that since it appeared a few days of "Multiple Networks" And it gives me problems with my connection ping as ranges online game, and this gives me high ping.

Here is a picture

http://img522.imageshack.us/img522/2774/capture1eic.jpg
Well I want to tell me how to remove it from Unidentified Network

PD: Excuse my bad English

A:Multiple Network | Big ping conection

Try this tutorial from Brink which should help you to sort this problem out.

Unidentified Networks - Set as Private or Public

4 more replies
Answer Match 49.98%

I am looking to make a script or batch file but I have no idea how to do this.

I need to ping all computers in my domain, which are listed in a text file. I would like the results to be output into two seperate text files in a list form of what computers can be pinged and what computers can't be pinged, no other info, just list the computers.

Any help would be much appreciated.

Thanks
 

A:Ping multiple computer with results

11 more replies
Answer Match 49.98%

Hi

A quick question ...

I have been online for 45 minutes and Zone Alarm has blocked 93 pings from various ip's. They are coming in anywhere from 2 seconds apart to 45 seconds apart. Make that 95 pings now. Is this due to the viruses out now trying to find pcs randomly?
 

A:[SOLVED] Multiple Ping Attempts

It could be due to the Sobig worm trying to 'find a home' or it could be just normal net background traffic.
The point is, Zone Alarm stopped it, so you are safe.
 

2 more replies
Answer Match 49.14%

Whenever I have 4-5 instances of a game active (multi-clienting), my ping starts to dramatically increase by 50-100

This does not happen in windows xp. Both my win xp and win 7 are fresh installations.

Any ideas?

A:Multiple active applications = high ping

Why do you need to run multi-clienting? Pictures please.

2 more replies
Answer Match 49.14%

Hello (again).. I refer to this earlier thread:

http://forums.techguy.org/windows-xp/964550-solved-editing-multiple-shortcut-properties-2.html

I have tried with both scripts to make this small change to shortcuts in multiple folders, but without success. I'd be really grateful for help once again!

The target boxes now look like this (this is for MS Flight Simulator use):

D:\FS9\FS9.EXE /FLT:"E:\My Documents\Flight Simulator Files\*********.FLT"

where ********** varies in each shortcut

and the Start In boxes all like this:

D:\FS9

All I want to do is change "E:\My Documents\..." in the target box to ""D:\My Documents...", leaving everything else as it is. Because of the variables (******.FLT) I can't make this work. So, as I say, further help would be really welcome,

Thanks (I still use the original scripts every now again and they work perfectly),

Martin
 

A:Editing Multiple Shortcuts - PING 'The Outcaste'!

Any ideas please?
 

3 more replies