Tech Problem Aggregator

A connection to the deployment share could not be made. The deployment will not proceed. ?? Help me pleas :(

Q: A connection to the deployment share could not be made. The deployment will not proceed. ?? Help me pleas :(

A connection to the deployment share ... could not be made. The deployment will not proceed. Connection OK. Possible cause: invalid credentials.
PLEASE help me. I really don't know what to do anymore... Let's say I'm desperate. It is the correct Name and also correct map, afterwords I made myself a deploymentshare map and it also didn't work. Tried the $ --> didn't worked... WTF is wrong :(
I tried the administrator account, a self made account. Tried domainname\account
Nothing worked...
I'm using vm workstation.
Deploying from a virtual server to a virtual client...

Pleas help me, it is a little urgent... I really don't know what's wrong...

Greets Timothy

A: A connection to the deployment share could not be made. The deployment will not proceed. ?? Help me pleas :(

Resolved the problems !
It was the bloody firewall! probably it is resolved in a new update but I didn't installed any updates because in belgium we have still a download limit. :)
Thanks for all the help of you and the time you spended on my issue!


I'll post my final customsettings.ini and bootstrap.ini

[Settings]
Priority=Default
Properties=MyCustomProperty

[Default]
OSInstall=YES

SkipAdminPassword=YES

SkipApplications=NO

SkipAppsOnUpgrade=YES

SkipBDDWelcome=YES

SkipBitLocker=YES

SkipCapture=YES

SkipComputerName=YES

SkipComputerBackup=YES

SkipDeploymentType=YES
DeploymentType=NEWCOMPUTER

SkipDomainMembership=YES
JoinDomain=Gip.local
DomainAdmin=JoinDomain
DomainAdminDomain=Gip.local
DomainAdminPassword=Passw0rd

SkipFinalSummary=NO

SkipLocaleSelection=YES
KeyboardLocale=nl-BE
UserLocale=nl-BE
UILanguage=en-US

SkipPackageDisplay=YES

SkipProductKey=YES

SkipSummary=YES

SkipTimeZone=YES
TimeZone=110
TimeZoneName=W. Europe Standard Time

SkipUserData=Yes


[Settings]
Priority=Default

[Default]

SkipBDDWelcome=YES
DeployRoot=\\Win-bjmkgpvypis\DeployShare

UserDomain=GIP.local
UserID=JoinDomain

UserPassword=Passw0rd

9 more replies
Answer Match 107.1%

Hello there.I am very new to MDT 2010, so please take it easy.I was running the RC and managed to successfully build a test Win7 image from a Reference machine. I did this by deploying the standard Enterprise image, but rather than 'capture' it straight after, I did some test tweeking to the image, as this is what our company requires. Once happy, from the reference machine, I opened up the "litetouch.vbs" script from the DeploymentShare$\Scripts and invoked a 'sysprep and capture' task I had previous created. This ran perfectly, created my custom OS back to the server and I was then able to deploy it to my test target.OK - so I was quite excited by all this - so far, so good.Yesterday, I installed the new 'final release' of MDT 2010 and I spent some more time on my reference machine, making sure it was 'perfect' as a base release.Once happy, I browsed back the DeploymentShare$ to run "litetouch.vbs" and although the wizard does start, allowing me to choose a Task Sequence and take me through credentials - at the end of the wizard, it just ends - no job is started.Sometimes when I run the .vbs, I get a 'wizard error' popup ...  "A connection to the deployment share () could not be made. The deployment will not proceed".Things I have done: rebooted both client and server. Recreated the 'sysprep and capture' job. Updated the MDT.Can anyone help?

A:a connection to the deployment share could not be made.

I hit this problem yesterday with two Dell PCs. I use MDT 2010.
The error message was totally off...
The problem in BOTH cases was caused by bad local hard drives. Diskpart's "clean" fixed the problem.

43 more replies
Answer Match 100.5%

Error screen:

We are getting this error prompt after windows 7 OS TS completion during first boot of the laptop .Also laptop not installed with NIC & bluetooth drivers.<o:p></o:p>
Issue is only in a single site laptops in which Imaging worked perfectly until last week.i have found only below errors in BDD.log and setupact.log<o:p></o:p>
BDD.log

i have gone through some solution in msforum link below which says to add sleep time in litetouch.wsf file but unfortunately i cannot test that script changesin my environment
.

https://social.technet.microsoft.com/Forums/en-US/5656b654-3f6d-444f-b650-f8dd2ff933d5/mdt-2010-deploy-dhcp-error?forum=mdt<o:p></o:p>

Is issue really from DHCP or MDT 2013 bug ? if its MDT bug then the above sleep time update will really work .Seeking your help to understand and to isolate this issue better.<o:p></o:p>



Nisajudeen

More replies
Answer Match 102.9%

We have a very strange phenomenon happening that we have never seen. Here's the background. Our computers are deployed with MDT and WDS, we apply any windows updates, they're on the domain, and we log them into the account used on that computer.
When they're logged in for the first time, we have a script that runs that adds shortcuts, network drives, wlan profiles, favorites, etc. We have had numerous netbooks that have been configured, used for a while, had more updates, and programs installed,
and then one day, everything disappears. They come up with a bad trust relationship, and it's as if the user profile for the domain account was never logged in or configured. There's no updates, programs, settings, nothing, it's as if the computers are back
to the state they are in after you click finish after deploying with MDT. There's no record (that I can find) of any sort of system restore. The only thing that's there that wouldn't be right after deployment are the event logs, and maybe some folders in appdata
for programs that were added after deployment. Anybody ever see anything like this?

More replies
Answer Match 99.54%

I have MDT 2010 setup and am in the process of setting up a 2nd share, I created the share with no issues, and created the "link" without issues as weel. I am now trying to get the linked share to replicate, and am getting an error that the "everything" profile is not valid, when it does exist on the new share. I even tried creating a new profile and setting it to that one, still get the exact same error. Has anyone else seen this?

A:MDT 2010 linked deployment share issue

Figured it out, if this ever happens to you, delete and re-create the 2nd share (the one you want to replicate too) then re-create the link and update. Something must have gotten corrupted.

1 more replies
Answer Match 75.6%

(do any of you have any experience using group policy to deploy service packs? i would like to automatically push out sp 4. i am currently using the microsoft software update services to automatically push out the critical updates. i actually ran into a problem with that as well. if i edit the default domain policy, my updates are pushed out. if i try to only apply it to a given ou, the updates are not pushed out. has anyone had this problem?

i ran across this link:

Windows 2000/XP SP Deployment

i don't have a test environment as such to test this first so i would like some feedback before i go forward with this.

thank you kindly in advance!)

 

More replies
Answer Match 75.6%

hi guys
I need a software that can be installed on one pc or server that can automatic deploy standardapp. to other pc on the network.
Can someone help me with this.
 

A:deployment

doe anybody know a software for the deployment of windos and software
 

2 more replies
Answer Match 75.6%

i'm looking to find out the best tool to use in order to automatically deploy windwows xp / 7 onto our Dell based workstations

also looking for appropriate software for application deployment and patch management to these PC's

can you help with any recommendations?

A:PC Deployment

You need to create a WSUS server

9 more replies
Answer Match 75.6%

VB6 - Does anybody have any suggestions on how to deploy a vb6 application to a computer using Windows 7 or 8. I have vb6 running on my win7 computer but I would like to be able to deploy my application on a client's win 7 machine. This application has been running successfully on the client's Win XP machine for years. The client wants to buy a new computer which will probably have Win 8. Can the Package and Deployment Wizard that comes with VB6 be used? I do have a copy of VB10. Can this help me deploy a vb6 program?

Geo. D.(mld4523)
 

More replies
Answer Match 75.6%

Hello,
I downloaded PowerPivot for Office 2010 and installed it manually to one computer with no problems. Now I try to deploy this MSI package to few similar workstations with GP but this fails. I can see from logs that installation has started but failed. I suspect
that this has something to do with UAC on Windows7 clients.
I can start the MSI manually with command prompt from same network location that my GPO starts it but the UAC prompts me to accept changes rightaway. So is the a option to disable or say yes to user prompt automatically?? Thanks!

A:UAC and MSI deployment?

Hi,
 
You can try to disable UAC on Windows 7:
1. Access User Control Panel from Start Menu -> Control Panel -> User Accounts and Family Safety -> User Account
2. Click on

User Account Control settings link.

3. Move the Slider to Never Notify
4. Click OK to make the change effective
5. Reboot.
 
Hope that helps.
 
Regards,
Leo  
Huang
 
 Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

2 more replies
Answer Match 75.6%

Hi Guys,

Just a quick question. Is there anyway I can specify a serial number when deploying a package via GPO? Its getting a bit tedious deploying the software then having to input the serial number 60 times :S

Cheers.
 

A:GPO deployment

Use a program like nLite to create an installation package to which you can incorporate the Serial Number and any number of tweaks. This works pretty much the same way as a Sysprep install.
 

2 more replies
Answer Match 75.6%

Hello...

Just want to know what solution do you guys use to install Win XP pro corp over 90 computers. All computers are identical and I can network them using a switch or router with a centralized server. I was thinking doing a LAN boot and then from there each PC would install XP from the server. What do you have to say?
 

More replies
Answer Match 74.76%

I have installed a Windows 7 Enterprise reference image. I have added a Windows 7 boot image on my WDS server and created a capture image, I have added the Ethernet and the storage driver to the boot image. When I PXE boot the refernce computer with the
capture image the WINPE is not loading, the green bar runs from side to side for a sec. and then black screen, I have tried to leave the computer for some hours but still black screen.
Any idears?

A:Windows 7 WDS deployment

Hi,
I consider this issue can be caused if the driver you added into boot image fail to install.

Please try the suggestions in this article:
Error message when you start a PXE client to connect to a WDS server on a Windows Server 2003 SP1-based computer or on a Windows Server 2008-based computer: "WdsClient: An error occurred while starting networking"
https://support.microsoft.com/en-us/kb/923834
Post back the setupapi.dev.log if you fail to get this issue resolved by above suggestions.

Keep post. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

2 more replies
Answer Match 74.76%

I wonder if you can help me with deploying Windows 10, I have a few questions;

Can I deploy W10 like I currently do via WDS 2008?

What software can I use to create a customized W10 DVD that allows me to alter/disable some of the standard initial setup questions?

We pay for an OVS agreement, should I be able to get a copy of Windows 10 from the VLSC? I cant seem to find a Windows 10 ISO, just 7 & 8?

Further questions may come aling, just trying to get a grasp of it all.

Many thanks.

More replies
Answer Match 74.76%

We're doing a quick POC for ATA. The first stage - where a couple of DCs had the ATA Lightweight Gateway deployed - was promising, and we'd like to extend the scope to further DCs. However, since some of our DCs are running Windows Server 2008 R2, this presents
a problem since .NET Framework 4.6.X requires a reboot. To add to the problem the ATA client itself requires another reboot. We also want to avoid doing a manual install on each DC - which would mean automatic deployment, maybe as simple as a GPO (with the
.exe first packaged as a .msi - an older thread about it
here) or invoking psexec with an include file to specify the list of remote machines. Looking at the silent installation instructions the
setup can pause automatically and not initiate the reboot of the machine - allowing a degree of control and preventing critical systems going down at an inappropriate time.
In the referenced article above it's stated that "When using the -NoRestart flag and restart will be required as part of the installation, the installer will pause until the server is restarted", which hints that there's no way for avoiding the
2-restarts issue. But just to be sure - has anyone found a workaround for deploying this in one go ? Eg deploy .NET Framework followed immediately by the ATA client.
Also - I was just thinking above of some ways to deploy the client automatically, but probably they might not be the best pick or someone went already through this proces... Read more

More replies
Answer Match 74.76%

I have an HP Pavilion dv7 here that I have put Vista Business 64-bit on, and am looking to sysprep it so I will be able to capture an image of it for our WDS server. I get this silly error message that I cannot find an answer for via research for the life of me!!


"The 32-bit version of the OPK tools does not support WOW64. Please use the 64-bit version of the OPK tools instead"

When I try to find anything on the 64-bit OPK tools , it asks for a microsoft partnership account ... I also checked on my 64-bit Install CD's , no luck.


Please halp!

More replies
Answer Match 74.76%

Hi All,

Here is our situation.

We have a little over 100 users all of whom have a corporate signature. However these signatures are images so each individual user has a different image containing their name and contact details. Is there any way that we can deploy all of these signatures to the relevant users automatically rather than having to go round and install them on each individual PC.

We use Microsoft Exchange and Active Directory, but if there are any other tools that can help us do this then any information would be much appreciated.

Many thanks
 

A:Deployment of Signatures

It would be hard to deploy the image to every user in that manner since the file names would be different. I am sure you could use some sort of environment variable to grab it from their user profile or some other shared location and integrate it into the script found here:
http://community.spiceworks.com/scr...-signatures-with-active-directory-information
 

1 more replies
Answer Match 74.76%

Hi guys,

I want to migrate windows 7, 8 & 8.1 to windows 10 across 300 PCs through automated process in badges.

Please guide me.

More replies
Answer Match 74.76%

Hey all,

A couple years ago, I began a help desk job where no imaging was being used. Someone had been manually setting up as many as 20 machines a month. I quickly figured out some half-assed ways to image which I don't think will work in Windows 7 so I was coming to ask to be pointed in the right direction.

Current method:
-Setup a machine the way I want
-Take Image with Acronis off of a BartPE disc
-Run NewSID before joining to the domain
-Join to domain and setup user account

I read that NewSID was nothing more than a tool for breaking things Vista and later. Is sysprep where I need to be headed or is that for people not using an imaging tool?



I'm always looking for help and great forums - I hope to find both here!

A:Imaging and Deployment

You might have a look at something like this:

Paragon Paragon Adaptive Imaging Tools - Overview





Quote:
Paragon Adaptive Imaging Tools

Get essential system tools for free!

The software installation process isn’t as trivial as it seems, especially when performed on multiple machines at a time, from operating system installation to client software configuration. The process to set up a new system can take a long time to complete - time which could be spent on your business or other more important tasks. Paragon's Adaptive Imaging Tools can help you prepare a universal image for further deployment on new machines and best of all is totally free.

7 more replies
Answer Match 74.76%

I have gone over many posts and have gotten to this point with imaging the M900 with windows 7 ENT.I first had an issue with PXE boot and found I needed the specific drivers for Win8.1 to inject in the boot image i'm using.  That worked great.  I then proceeded to image my M900...then things went downhill....I got to the Windows login screen but no keyboard or mouse would work.  I tried to inject the USB 3.0 controller into the boot image and that didn't work.  I did make a driver package from the SCCM package from Lenovo and that gets installed after windows as a task sequence, but still no USB so i cannot do anything with it once it's done.Has anyone successfully used configmgr 2012 SP1 and imaged the Lenovo M900?I bet it's something small i'm missing but i'm sort of running out of time. I would be very thankful for some assistance.

More replies
Answer Match 74.76%

Hi All, new to the forum,

Has anyone had any joy using the DISM image deployment tool,

below is the message i get trying to capture an image

DISM doesn't recognise the command-line option "d:\thinimage.wim"

I've tried the below.

dism /capture-image /capturedir:f:\ /imagefile "d:\thinimage.wim" /name:"MyCompany"

I've checked this over and over and i'm defiantly following the line they require.... any ideas? Thanks.

A:Win 8 Image Deployment

I know nothing about DISM, so please check what I say first...

...but looking at the format of the command line, I wonder if there should be a colon after /imagefile?

so replace
dism /capture-image /capturedir:f:\ /imagefile "d:\thinimage.wim" /name:"MyCompany"

with
dism /capture-image /capturedir:f:\ /imagefile:"d:\thinimage.wim" /name:"MyCompany"

5 more replies
Answer Match 74.76%

I have to configure a cisco ASA 5510 for my web server, i did all the config by the manual, but typeing my outside ip i get page could not be found,
i enabled and configured a DMZ interface where i connected my web server, (interface ip 10.0.10.1)
1. I added a NAT rule between DMZ and inside interface ex.: (10.0.10.30 ->78.52.39.51) with enabled PAT port 80
2. A NAT rule betwen the inside and DMZ interfaces (10.0.10.0 -> 10.0.10.0)
3. Address translation rule betwen the outside and DMZ interfaces that translates its public ip of the DMZ to its privat ip, ex.: (75.52.39.51 -> 10.10.10.30)
Help please
 

A:Solved: DMZ deployment

9 more replies
Answer Match 74.76%

Hi Guys,

Just signed up and am looking forward to receiving and sharing tips!

If I wanted to deploy a single image of a customised XP SP2 environment to hundreds of laptops all at once (or very quickly) - what would the most efficient way? Someone has told me to use NAS, but I'm not sure how without attaching it to a server...

Got an assignment with this question and am trying to come up with a bunch of ideas...

Looking forward to your responses.

Cheers,

Flappy
 

A:XP SP2 deployment question

6 more replies
Answer Match 74.76%

The wife has taken over my computer... and a lot of "c***" around that I'd like to clean up. Here' my log.

I appreciate your help. The DiskAdServ.eve and DiskAdKeep.exe are pains.

Thanks,

Dan

==========================================================
Log was analyzed using KRC HijackThis Analyzer - Updated on 1/23/05
Get updates at http://www.greyknight17.com/download.htm#programs

***Security Programs Detected***

O4 - HKLM\..\Run: [ashMaiSv] C:\PROGRA~1\ALWILS~1\Avast4\ashmaisv.exe

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Logfile of HijackThis v1.99.0
Scan saved at 8:44:05 AM, on 1/25/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Unable to get Internet Explorer version!

Running processes:
C:\Program Files\Common Files\Logitech\QCDriver2\LVCOMS.EXE
C:\Program Files\DeskAd Service\DeskAdServ.exe
C:\WINDOWS\system32\P2P Networking\P2P Networking.exe
C:\Program Files\DeskAd Service\DeskAdKeep.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.iGlide.net
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://games.yahoo.com/
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.bellsouth.net
R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,ProxyOverride = 127.0.0.1
O1 - Hosts: 12.129.205.209 search.netscape.com12.129.205.209 sitefinder.verisign.com
O1 - Hosts: 12.129.205.209 search.netscape.com12.1... Read more

A:Returned from deployment to this...

ok hello my name is NoRiN and welcome to TSF. i will post as best i can and more than likely one of the mods will come in and post as well... they are good like that ^_^

go ahead and run HJT and check the following:

O4 - HKLM\..\Run: [New.net Startup] rundll32 C:\PROGRA~1\NEWDOT~1\NEWDOT~2.DLL,NewDotNetStartup -s

O4 - HKLM\..\Run: [DeskAd Service] C:\Program Files\DeskAd Service\DeskAdServ.exe

O4 - HKCU\..\Run: [WeatherCast] C:\Program Files\WeatherCast\Weather.exe /q

do you know exactly what this is below?
O4 - HKLM\..\Run: [PrinTray] C:\WINDOWS\System32\spool\DRIVERS\W32X86\2\printra y.exe

or is that your printer?

what i suggest is going to get Ad-Aware SE and also get SpyBot - S&D. open the installers, update as nessessary and let them run i suggest running Ad-Aware first then SpyBot [i suggest this because after Spybot finishes finding the bad files and you select which ones to fix it will set a system restore point. so... thus meaning if you run spybot first it will set a system restore point and then you run ad-aware and clean thos files out. well next time you restore your system to that date you have all of that spyware that you have to clean yet again. ~_^] you already have HJT which is good.

also a good thing to do. is the generic method. go in thru control panel and uninstall those programs.

i also suggest two other programs that are really well designed and user friendly.

Ashampoo WinOptimizer Suite | Wintools.net

WinTools.net... Read more

18 more replies
Answer Match 74.76%

Finalizing XP deployment

I am looking to simplifying the deployment of my company?s standard build. Iv tested a few different methods and found one that is close to working perfectly.

So far I have been able to build a WinPE CD, boot into it then apply an image that I have stored on another local drive. This works with the only problem being two different media.
Iv been trying to add the standard image to the WinPE CD but that makes the CD over 2GB - so needing a DVD.
Iv added the file during the WinPE CD build but the software cant handle a CD being over 700MB.
Iv used ImgBurn to add the image to the ISO of WinPE. This will burn, eventually, but when booting I get 'CDBOOT: Cannot boot from CD : Code 5'
When I try burn the complete ISO under Nero it runs to part way through then stays at that percentage forever (Different values each time, left over the weekend and still no change or error)
Iv played about with a couple different boot files - Neros standard ones, microsoft_corparation.img, ImgBurn standards and the original boot file from the WinPE CD. None have been able to complete the boot - different problems each time - each message just telling me that it cant boot, not much of a reason.

Can anyone help with their experience or give advice for a better deployment method?

More replies
Answer Match 74.76%

Any thoughts on the best and/or simplest way to deploy applications to workstations which are not members of our Domain? What apps are available that will allow me to, for example, create an installation package for an appilication complete with all the configuration options I'd like and then place that package somewhere on a server or even burn it on a CD so that launching the package would be the only task required to install/configure the app. Also, what's available that would allow me to remotely place the install package (or any file for that matter) on the desktop (or start menu)of a large number of non-domain workstations based on the IP address of the workstation. Thanks for any pointers...
 

More replies
Answer Match 74.76%

Hi everyone,
i know the internet is full of guides and tutorials but i haven't got what i'm looking for.
My situation is as follows:
Our corporation buys oem licensed windows 7 computers from our suppliers.
we would like to create an image with icd , without overwriting the product keys (since we don't buy volume keys, paying 2 times seems a little stupid aswell). We would like the icd image to join the domain under a variable name (something like desktop01
- desktop02 etc ...).Also it should be able to enable the built in local administrator and disable any other local user besides domain users.

within this icd image i would like to add other applications aswell (symantec antivirus, citrix, adobe reader, office365, etc...).
Is this possible ? if so could anyone guide me to a fairly easy guide where i can do all this stuff?

More replies
Answer Match 74.76%

I have staged a Windows 7 pro with  SP1 computer as a reference machine. Run sysprep with OOBE and Generalize. Captured the image and imported it to MDT as a custom image file. It work almost the time. But I have randomly two problems. 
1. After the completion of the OS deployment with 0 errors. The computer restart, but it hangs at a black screen with the mouse cursor.
2. Some computers have the same problem as in 1 but after sveral days of use. (3 to 4)
Please note that we have in the out of the box drivers several models of DEll laptops.
Is someone out there that knows what could be the cause of these issues?
Thank you in advance.

More replies
Answer Match 74.76%

Please help I am lost.

Firstly, I try to run an exe file which addresses an Access file on my computer and it works fine I transferred to another computer i get a 429 Activex error.

I then created an installation program with P&D Wizard and when I try to install it on my computer and the other one I get a MISMATCH ERROR --without a code number.

Maybe this means something the Access file is created with Access 97 but computer that it is about to be ran on it loaded with 2003.

Maybe another installer might work --I dont know. Is there any other installer that is easier to use? I mean just add my exe and access file and the installer automatically chooses all needed dll and ocx.
Pleas help me. Thanks
 

A:Application Deployment

11 more replies
Answer Match 74.76%

I was wondering if there was a way of doing a Windows Xp installation over the Network without using a enterprise solution like Windows server 03/08.

I was thinking maybe there is 3rd party software that can emulate this feature of windows server?

More replies
Answer Match 74.76%

Hi, I hope someone can help me. We use MDT to deploy Windows 7 to desktops and laptops. This was working great until recently. The deployment deploys the image but it fails to logon to the computer once the deployment is done so that it can do the Post Install
steps in the Task sequence.
I have Auto Logon enabled in 7 oobe System section of the unattend.xml but when it gets to this part it says username/password incorrect. If I manually enter the password set in this step it logs on and carries on with the rest of the task sequence. I have
tried creating a totally new task sequence and unattend.xml but i still get the same issue. I have tried changing the account it users from the defualt built in admin account to a domain account but still get the message username/password are incorrect. Is
anyone able to help?

More replies
Answer Match 74.76%

Greetings
Please help. I have SBS2003 setup.Trying to deploy MSI package via GPO.
1.Setup distribution point
2.applied recommended Microsoft settings

Software does not deploy for some reason?
Any suggestions would be appreciated!
 

More replies
Answer Match 74.76%

OK, so I have been doing XP the easy way and now I have to deploy Win7 the Microsoft way. They give you all sorts of tools to use but no direction on how to use them. Does anyone have a link to senisble instructions on this process? How to create the image (I can do that I think), how to get it to the server and how to image multiple PC's.

Thanks, Ted

A:Vista deployment

Microsoft has quite a few articles including step by step instructions on Windows 7 deployment at TechNet that you may find helpful: http://technet.microsoft.com/en-us/l...8WS.10%29.aspx

2 more replies
Answer Match 74.76%

Hello,

I am trying to achieve the following

1) Uninstall office 2007 from all domain machines

2) Install Office 365 on all the domain machines

I have almost 50 users, what's the best way to do it?

Thanks.
 

More replies
Answer Match 74.76%

Anyone out there have a solution for deploying Office XP SP3 silently?

Thanks,

J
 

A:Office XP SP3 deployment

as Elmer Fudd (who invented the Internet waaay before Al Gore) used to say:
be wery wery quiet

take a look through the office xp resource kit, Display Setting section
http://www.microsoft.com/office/ork/xp/one/depb03.htm
 

3 more replies
Answer Match 74.76%

Howdy all!!

I am new to the forum and completely new to imaging. So my question is what will I need and how do I setup an imaging solution by way of pulling images with ImageX??

Hopefully I'm in the right place!

K

A:Win 7 deployment ImageX

Hi and welcome to TSF perhaps this can help PC Deployment with ImageX - O'Reilly Media
Use ImageX to capture a Windows 7 Image - YouTube
ImageX Command-Line Options

13 more replies
Answer Match 74.76%

Hi Guys

I do tech support and training for a software company, our application runs through Mozilla firefox.

The problem with this is that there are often more than 20 users that i need to install Firefox and acrobat reader on.

Is there a way that i run one program that can run through the installation of both firefox and acrobat in one.

Thanks for taking time to read this

Regards

A:Deployment Software

Sounds like this is just what you need: Ninite Easy PC Setup - Silent Unattended Install Multiple Programs At Once

1 more replies
Answer Match 73.92%

Has anyone on here been involved in a large scale change from ETrust (servers and workstations)

We currently have ETrust on servers and desktops and the version we have is at end of life. We are moving to

Servers
· McAfee ePO Agent 4.0
· McAfee VirusScan 8.x
· McAfee Anti-Spyware 8.x

Clients (desktops and laptops)
· McAfee ePO Agent 4.0
· McAfee VirusScan 8.x
· McAfee Anti-Spyware 8.x
· McAfee Host Intrusion Protection Service 7.0

Just wanting to know if anyone has experienced any issues with McAfee install and if there are any known clash's with application software.

Thanks
 

More replies
Answer Match 73.92%

In A WinXP / Win2003 server environment, you do not need to install the drivers in to each WinXP client. This is automatic.

Moving to Windows 7, will I need to install Server 2008 to get this same level of automation.

A:Windows 7 corporate deployment

If you use the Enterprise version you shouldnt have to.... I think...

8 more replies
Answer Match 73.92%

Having trouble downloading everything -  even updates to Windows. ( Vista home 32bit )  Checked all my security software & programs, none are causing the problem.  So, I tried a "clean boot"  - no good, but upon further inspection, I noticed 2 entries in my Startup menue - both marked "unknown" .           They are -    Menge ...  rundll32",DllRegistryServer   , and , Deployment ...  rundll32",DllRegistryServer  .   What the heck are these entries ?  I posted earlier about my laptop overheating , and found that I could not download Speccy, nor Avira, nor updates to Spybot, Malwarebytes, or Windows !    I will "uncheck" these two entries , but I sure would appreciate some guidance as to anything else which could be the problem !  Thanks !   Laura

More replies
Answer Match 73.92%

Has anyone had experiences using the MS Windows Deployment Services?
I am attempting to config a Windows 2003 Server box for use with WDS for imaging XP based images remotley, unattended.
Any suggestions or horror stories would be appreciated.
 

More replies
Answer Match 73.92%

Hi all
I am new to VB and need some help....i dont know if these questions are silly. But they are really eating my brains right now

1) I need help on VB6 "packaging and deployment wizard".
I am able to package the product and even deploy it.
I need to know how to include a end user license agreement file (EULA)
before the installation .
If the user does not accept the conditions and clicks the exit button, it should quit the installation.
Is there any tutorial online which explains the programming part of setup1.exe? I tried to search MSDN online and i went crazy
2) Can somebody tell me how to refresh the VB data reports screen.
3) can i make the trial version of the product expire in 30 days.(even when system date is changed by user)

any help is truely appreciated.

regards
Sara
 

A:VB6 packaging and deployment wizard

well im assuming since you say your new to VB, you'd be incapable of creating your own trial period coding, or adapting your own installation rules. If you are incapable of that, it is a tad tricky, then i suggest you use teh internet to aid your cause.

You can download free programs that give you teh ability to create your own installations for any files. unfortunatly the one i have used in the past i have completly forgotten sorry.. but its out there, with it you can have activation codes, agreement notes, im not entirely sure about trial periods but mebbeh.. Th only thing they get back is a small advertisment that users will see at teh end of installation, nothing too bothersome.

Hope that moderatly helps
 

3 more replies
Answer Match 73.92%

I came back from a 6 month deployment expecting to unwind a bit with some games on my budget gaming rig, so i bought the gold pack of starwars empire at war and installed it hoping to play with a friend who just recently bought it as well. they both installed fine, but once i fired up empire at war, a wierd screen flicker was happening and though my system was more than capable of running it at max settings. adding to that, it would only go to bare minimum settings on auto detect. I changed it manually, and though the flickering was gone, the mouse cursor disappeared. After a few resets, i got it to run fine with single player, however once i go into multiplayer mode the whole thing freezes, and since then I've tried playing forces of corruption, which wont run at all, and neither will any of my steam games. Might this be a driver issue? or will this just constitute a format and reinstall of windows 7?

More replies
Answer Match 73.92%

Does anyone have any good links or documents that relate to the 70-624 certification? My company is pushing this cert and I have managed to find a few things here and there to help with the subject. If anyone has anything that they feel would be interesting, please let me know.

Thanks!!

A:Business Desktop Deployment

Hi acadamis2000,
Here is a MS link that talks about it:

Preparation Guide for Exam 70-624: TS: Deploying and Maintaining Windows Vista Client and 2007 Microsoft Office System Desktops

Raj

6 more replies
Answer Match 73.92%

I have ata gateways paired with each of our physical domain controllers.  However our vmware folks are balking at doing the port mirroring for our virtual dcs.  (I  know, but I've lost that argument.)
Does a partial deployment still have merit?  Or will this mean that we'll essentially never catch malicious behavior?  I would think it would still have some merit, but have a large blind spot.
Would including event forwarding from the virtual dcs to one of the existing gateways make sense?  Or would that just confuse things?
 

More replies
Answer Match 73.92%

Hiya

The checklists can be used as an aid for deploying Microsoft© Operations Manager 2000 (MOM) in a specific operational scenario. This scenario is derived from current MOM installations in the user community. The purpose of this checklist is to give you a logical, and in some cases, required, sequence of steps for successfully installing and configuring MOM elements in a single pass.

System Requirements

The information in the checklist applies to:
- Windows servers deploying MOM 2000

Operating System - Windows 2000, Win XP
http://www.microsoft.com/downloads/release.asp?ReleaseID=43249&area=search&ordinal=15

Regards

eddie
 

More replies
Answer Match 73.92%

ok so im still learning and java confuses me. I see I have the java deployment toolkit 6.0.160.1 and 6.0.170.4 now should I be deleting older versions of this and where would I locate it to do so. All the java/adobe/sun micro systems jre type stuff is there an easy way to manage these updates and delete the old versions?

A:Java Deployment toolkit

To uninstall all previous versions : http://www.java.com/en/download/help/uninstall_java.xml.Then go here: http://www.java.com/en/download/index.jsp. From then on java will advise you when a new version is available.

7 more replies
Answer Match 73.92%

Hey all,

I've now got the need to upgrade all workstations from Office 2007 to Office 2010.

I've read through TechNet posts and see that i can edit the config.xml file, but i'm not too good with editing stuff from scratch, i'm easier to make use of a template and change the variables.

Can anybody guide me in the right path?

Ideally, someone could have a HTML page where you enter all the details and it provides a config.xml file at the end - anybody know of something similiar?

Thanks guys!
 

More replies
Answer Match 73.92%

My boss and I are going to be deploying Windows 7 machines (new ones to replace the old ones) to about 20+ workstations at 3 sites.

We are going to be making some images to push to certain stations.

We are planning on using MDT2012. Does anyone have any tips?
 

More replies
Answer Match 73.92%

Users of a Access db distributed with the Package Wizard are getting the
error "Can't assign a value to this object" when I try to set a value
through code. The value is a simple calculation. (A= B/C). I can't figure
out the problem mainly because I can't duplicate the error in the
development version. Even if I start it up with the /runtime the error
doesn't occur, the code works. Why does this error occur or how can I track it down if I
can't duplicate it in my system?

Thanks
 

A:Can't assign Value Error in Deployment

Eddyed, how about sending yourself a copy?
It could be the error message has to do with their version of Access, have they got the full version or just runtime?
 

1 more replies
Answer Match 73.92%

Hi ,

I need to automate the deployment of a .Net application keeping the following factors in mind:

- The process involves operations like copying folders ( from build machine to deployment m/c) , copying files, modifying config files etc.

- The deployment must start automatically after a successful build.

- The Build is done using Visual Build pro.

Any starting points on how I can do it.
 

More replies
Answer Match 73.92%

First, whats the difference between WDS and MDT?

Second, do I have to have a Windows 2003 Server or can I set this up on a network with nothing but XP PRO machines?

Finally, If we buy 30 dell computers with xp pro already installed is it neccesary to even use WDS?

Just some background, we are trying to set up a network where some users are restricted from doing certain tasks on their computers and over the network while others have admin rights. I'm not sure if I have to start from scratch or just network the computers and then implement AD for group polices, etc.

More replies
Answer Match 73.92%

Hey Guys & Gurls,

I've been attempting to deploy Microsoft Office 2003 Professional across the network using a GPO.

I've created an OU called 'lab' and in the lab OU i've added a user namely 'lab' also.

So i have a user called 'lab' in an OU called 'lab'...

I've created a group policy on the OU and attempted to assign Office 2003 to the OU.

I used the MSI file, pro11.msi.

I've forced out GP update (gpupdate /force) but nothing visible on the desktop!

Im running Server 2003 and Windows Vista Ultimate.

I've disabled Windows firewall and Symantec Endpoint Protection on the client

Any help?

thanks!
 

More replies
Answer Match 73.92%

Hello.

Now that ATA is GA, will you release updated deployment documentation and system requirements? The preview only supported 1 center, 4 gateways and 10 DCs - how is this now for the full release? The documentation on microsoft.com/ata is still for the preview
only.

Any more info on the disk space requirements for the central's mongoDB (e.g. per DC based on how busy it is)? Will the disk usage just grow and grow, or will old and not important data be dropped?

Does it support more than one domain/forest now?

Thanks!

A:Updated GA deployment guide?

Hi SaMmn,

We just did ! Please check our latest TechNet content at http://aka.ms/ata-technet.
If you do not see it updated, give it some time, as it was just refreshed.
Thanks,
     Microsoft ATA Team.

2 more replies
Answer Match 73.92%

Hello,  Can someone pls clarify what is the caveat or limitation if we go with

Using only ATA Lightweight Gateways v/s  using both  ATA
Lightweight Gateways and  ATA Gateways ?   Is
it that if we go with only the light gateways then  would we only have visibility on all the usual events getting logged on Domain controllers (like the logon/logoff, DNS events) ?  And is it if we go with the 2nd option of both (lightweight gateway
+ gateway) then then this will give us more visibility into the overall network and not just limited to events on Domain controllers ?   The reason i am asking is if we go with the later option of having both, then the mirror port which gets connected
to Gateway server (whatever we configure on our switch) will be capturing all the traffic flowing through all the servers (not just to DC's) so wouldn't we get more visibility into our rest of network as well ? 

Am i misunderstanding this ?  Appreciate any help .

More replies
Answer Match 73.92%

Have WAIK ver. 6.0.6000.6386 installed on a Vista Ultimate x32 machine where documentation includes a lab deployment excersise. This lab documentation, found in the documents folder of the WAIK download has a specifice excercise for vista machines.
error message:HResult 0x800F0823. Error log posted to live document https://cid-63220807a7f4accb.office.live.com/edit.aspx/WAIK Error Log.docx?nd=1 Looking for an authoritative solution.

Additionally, have not been successfull in launching WDS which is, as I understand it, is a feature of WAIK. Looking for assistance in making these deployment tools useable
 

More replies
Answer Match 73.92%

Here's the situation. Right now I have a lot of computers that need to be set up completely from scratch. What I would like is to somehow create a disc that I can put on autorun that will install XP on to a blank hard drive, configure all of the settings involved (such as connecting to the server and adjusting screen resolution, icons, etc.), install and configure all the subsequent software that will be standard on all of the machines (such as readers, compression apps, Microsoft Office, etc.) and then run Windows/Office Update, all on its own. Is there software out there that can handle this kind of thing? If not, is there some other method I could employ to create such a disc? Any help would be greatly appreciated!
 

A:Automated system deployment?

MS SMS?
 

2 more replies
Answer Match 73.92%

I've written a program in VB.Net version 2008 (beta). Now I want to deploy it so other persons can use the program. Nothing works. Instructions on deployment for previous versions of VB.Net do not work. Instructions in the help files of the current version do not work.

Is the beta version of VB.Net crippled on deployment until one can buy the full version?

Is there any way to transport a program written in VB.Net 2008 back into VB.Net 2005?

Any suggestions are welcome, but I fear the problem is insolvable.

Neophyte Nerd
Near Calgary, Canada
 

A:VB.Net 2008: Deployment of a project

6 more replies
Answer Match 73.92%

Hiya

These webcast presentations cover evaluating a deployment enviroment, planning deployment, and the business desktop deployment
Sessions Include:

20030917DeskDeploy1: Evaluating the Deployment Environment: Best Practices for Evaluating Your Environment

20030917DeskDeploy2: Planning Deployment: Overview of the Planning Phase—Creating the Roadmap

20030917DeskDeploy3: Business Desktop Deployment: Solution Accelerator Part 1

20030917DeskDeploy4: Business Desktop Deployment: Solution Accelerator Part 2
System Requirements
Supported Operating Systems: Windows 2000, Windows NT, Windows XP

Required Disk Space: 70 MB
Microsoft Windows Media Player 6.x or later
Microsoft Internet Explorer 5.x or later
MSXML 4.0 SP2
http://www.microsoft.com/downloads/...f7-d5e7-4b1c-8018-e3610d4d60bb&DisplayLang=en
Regards

eddie
 

More replies
Answer Match 73.92%

Hi.

I would really appreciate help with the below query.

What I have:
I've created a custom deployment for W10 using WICD and placed it on a USB Pen Drive.
It is for internal purposes and it works very well for what it is intended.

Looking to:
What I really want however is for it to be self included in the drive in which it will be installed, but I am not sure how possible that is. (Dell, HP, etc do something like this on their new machines, don't they?)

In short. I am looking to place this deployment image onto, perhaps a bootable partition on a SSD.
The hope is that it would boot up, begin the instalation process and install itself on the remaining (empty) partition without wiping itself out.

Currently the USB Pen Drive deployment image boots any drive, begins the instalation and as part of such, wipes the entire drive. The install data is never lost because it is handled by the USB Pen Drive.

How can I:
1. Generate a RAW partition (perhaps hidden)
2. Write protect it (keep it from wiping)
3. Edit the instalation method of the W10 deployment (specify not to auto wipe all by default)
4. Allow all to be clone-able

I looked around for this information but did not find specifics. I'd gladly read if needed, so even good links will be appreciated.

Big Thanks.

More replies
Answer Match 73.92%

Hi
I have a situation that the solution has been escaping me.  I have sysprep successfully a machine, create a WIM image and manage to redeploy it to 4 out of 6 machine successfully.  The last 2 however, prompted me with an error during the deployment.
Reviewing the setuperr.log file, the error is 
2016-07-26 15:12:45, Error      [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize', returned error code 1627[gle=0x000003e5]
2016-07-26 15:12:46, Error      [0x060435] IBS    Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x65b

I looked online around the capisp.dll and I found a possibility of where the 2 machine had a different device configuration and the recommendation was to change my
PersistAllDeviceInstalls in my unattend.xml to false and have it rediscover the devices.  I did that but still the same outcome.
I have run out of ideas and I need help to move forward.  Please help.

More replies
Answer Match 73.92%

I've run the update readiness tool numerous times and it fixed all but one error the first time w/no effect the other times:

I have run Fix It and had no effect.

When trying to run the update pkg it says it is already installed and I don't know how/if it is possible to force a re-install.

Here is the CBS log error:

Checking Component Store
(f) CSI Missing Deployment Key 0x00000000 95e8e9ef6bc..e830f5996db_31bf3856ad364e35_6.1.7600.20797_c558dc586ed83c80 HKLM\Components\CanonicalData\Deployments

This appears to be KB2388210 that did not install properly from looking at the registry key entries, looking backwards from the Components\Derived Data\Components to the Canonical Data\Catalogs entries.

No trace of it in Deployments.

Is this simply a registration issue that can be resolved easily?

What can I do?

Thanks,

Brad

A:Missing Deployment Key - cannot install SP1

Please followthe Windows Update Posting Instructions and post the requested results

7 more replies
Answer Match 73.92%

anybody familiar with building a .msi file for group policy deployment? I have a .exe that i would like to deploy through Gpolicy, but gp only uses .msi. So i have read how to create .msi packages and it seems like a lot of steps?
 

More replies
Answer Match 73.92%

I'm trying to figure out a way to not have SP2 enable the windows firewall while installing. I sadly do not have access to active directory, but do have an NT4 domain and Symantec Solution Suite 1 which includes a console for pushing out files and commands.

My problem so far is that anything I do after SP2 is installed, but before the machine reboots with regard to firewall settings seems to be overwritten on reboot. And then I can't remote in anymore...
 

A:XP SP2 deployment with firewall disabled

jp10558 said:

I'm trying to figure out a way to not have SP2 enable the windows firewall while installing.

Is That possible?Click to expand...
 

1 more replies
Answer Match 73.92%

Hi,
During my Windows 7 MDT deployments, I have unattend.xml run a first login command that adds extra input languages to Windows from a local XML file. The command is:
control.exe intl.cpl,, /f:"C:\Scripts\lang.xml"
This works when run interactively, but doing so in the oobesystem pass of the unattend.xml copies them over to the default user profile. In the original version of MDT 2013, this wasn't an issue. It worked fine. Now, I'm using MDT 2013 Update 2, and it doesn't
work. The unattend.xml file validates fine and does not produce any errors. The lang.xml file is in the specified directory, but that directory is hidden. I don't think that is the issue because the command works when run interactively. 
Setupact.log does not show any errors around the step the command is run. It just doesn't happen.

What else could I be missing?
Thanks

Jason

More replies
Answer Match 73.92%

Hi have a query

i want to dpely windows 7 across around 10 PC's but minimise user downtime, as such i intend to install manually using retail versions of the software then update to the specifications i need. all the final workstations will need to be the same.

i have 3 pc's to roll out, then i will drag 3 in, upgrade, redeploy and so on, thus meaning that noone will loose much productivity to downtime.

whats killing me is that after install, which takes around 30 mins including office and other bits of software, the patching and updating of windows on each machine to latest KB updates is taking forever!! so with say 10-15 new pcs all trying to install updates within few hours its going to slow the network to a stop.

is there anyway i can take one of the pc's i have finished, image the updates and software installs then patch them all onto a new clean install of retail windows 7????

i have looked at all sorts of networkable options such as microsoft system essentials or symantec ghost, but none will allow a stand alone image creation off network that i can tell

help!!

thanks in advance for any advice

Ben

A:Image for multiple PC deployment

Take a look at this tutorial:
Windows 7 Installation - Transfer to a New Computer

Using the Backup option.

1 more replies
Answer Match 73.92%

Hi,

I have a question about deploying windows (multicasting) over a network that I’m hoping someone with the expertise will be able to offer a little advice on...

I work for a small PC manufacturer in the UK, and at the moment we are installing windows on to the machines using a USB3 hard drive with disk imaging software (Acronis). Our company is currently expanding and has just become a Microsoft partner, so my employer has asked me to look into setting up an image server and deploying windows over a network connection.

What I’d like to know is: what kind of infrastructure would I need to put in place to execute this task effectively?

My work place is relatively small. The install bench only has 8 bays - so for the moment this will be the maximum number of PC’s that will need to receive the broadcast. In time, I expect we will have to relocate into larger premises, so the solution has to be scalable. Time is also a huge factor at the moment. I would like the network to be as fast as possible, whilst still being economical with costs.

From what I understand, the server would have to have quite a lot of processing power; a lot of memory; fast hard drive access, and a fast ethernet connection. I was thinking something along the lines of an i7 2600k overclocked to 4.5Ghz / 16GB 1600mhz memory / Multiple SSD’s in raid 5 or 10 array, and a gigabit network card. How does that spec sound for the task? A networking switch would also be required. Do you have any recommendat... Read more

A:Windows deployment over a network

Having set up a Ghost type environment, you'll need to do a few things. First, you need to have your PC's PXE enabled. PXE support is going to be relevant to the NICs you are using. If you don't have PXE ability with the NICs you use with your PCs, then everything else is a no go. Next, you need a DHCP server and you need to set one of the DHCP boot parameters, I think it is type 60 (can't remember at the moment), to point the PXE client to the boot image server on your network. The boot image server is responsible for providing a small boot strap to allow the PC to come up with an OS. The boot image server also provides extra parameters to do a network map to the image server to load the actual image onto the PC. The last component is the image server which holds the image itself and pushes it to the client. All of these components can be a single box.

Depending on your network design and where you place the image server in relation to where you image your boxes, you might have to invoke a relay agent to forward DHCP requests to the DHCP server through a routed hop.

As far as hardware, the biggest impact on image performance is hard drive subsystem on the image server and the network itself.
 

2 more replies
Answer Match 73.92%

Does anyone know of a network driver that is compatible with the EliteDesk 800 G2 SFF in WinPE 4.0 i'm using symantec image deployment Altiris

A:HP 800 G2 with Symantec Image Deployment

Hi \have you looked here... http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=7633279&swLangOid=8&swEnvOid=4057



Happy 2 [email protected]

1 more replies
Answer Match 73.92%

okay...so in my firefox plugin's I found this one and it says that it is vulnerable and to use with caution.  I can't find it to delete it.  It does have the option to disable  in firefox tools but as soon as I restart my computer....I have to disable again...would like to get rid of it altogether.   I went to control panel and deleted java altogether and after doing so all my other java plugins were gone but this one remains as the only one....Is this a cause for concern.. I can't find any java in my programs list...don't know where this toolkit could be located  ( I was going to delete all java plugins and reinstale the latest version from oracle... don't know very much about java and what it is for?

A:java deployment toolkit 6.0.370.6 6.0.370.6 ?

Hello Lets run these and see hw it is.

This article will help you install or update your JRE and get it working in Firefox
 
 
Please download MiniToolBox, save it to your desktop and run it.
Checkmark the following checkboxes:
Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory size.
Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run.
Note: When using "Reset FF Proxy Settings" option Firefox should be closed.
 
 
 
 
Please download Malwarebytes Anti-Malware and save it to your desktop. %5BLIST%5D Important!! When you save the mbam-setup file, rename it to something random (such as 123abc.exe) before beginning the download.Double-click on the renamed file to install, then follow these instructionsfor doing a Quick Scan in normal mode.[/list] %5BLIST%5D Don't forget to check for database definition updates through the program's interface (preferable method) before scanning.If you cannot update Malwarebytes or use the Internet to download any files to the infected computer, manually update the database by following the instructions in FAQ Section A: 4. Issues[/list] Malwarebytes may "make changes to your registry" as part of its disinfection routine. If using other security programs tha... Read more

6 more replies
Answer Match 73.92%

I have a licensing question regarding the deployement of Windows 7.

We are currently purchasing notebooks that have an OEM key for Windows 7 Pro and have been configuring each by hand which can get really annoying. I want to create an image of Windows 7 and use it for deployement however I'm not too sure about the licensing involved.

First off, you cannot image an OEM version and you need an open license version, correct?

Do I need to purchase a VLK license for each notebook that I want to image to? Or can I just purchase 1 open license and image that to multiple computers since the OEM key is in fact for Windows 7 Professional?

A:Image Deployment of Windows 7

I believe you're going to need to look into VLK if you're intending on using the same key & installation across multiple machines. You "may" be able to get away with buying one 7Pro and then inserting the individual OEM key that is on the individual laptop stickers, however I'm not sure on that one so don't quote me there. I'm sure someone else here does know this answer though so sit tight, some one else will surely be able to answer this.

Aside from the licensing issues, once you get the version of Windows that you'll be installing legally with a licensed key, you should look into windows sysprep. It will cut your distribution time down incredibly using this method rather than setting up each machine individually from scratch.

3 more replies
Answer Match 73.92%

Hi All, Is there anyway in the bios of a p50 that I can change where an OS will be imaged? When I try to image a p50 using a UFD, seems that the laptop is regarding the UFD as a hdd and because its "removalable", MDT is not able to put an OS on there. Any suggestions on a possible fix for this? I am trying to image a new Lenovo p50 using my UFD. I have setup WDS and MDT. I tested from the network and I am able to image the laptop fine. I know the UFD is working because I imaged a t460 without any errors. However, I am stuck on this p50. Upon starting the image, I get a failed message saying:Disk(0) Can Not be Formatted in ZTIDiskPart.Possible Cause: Removal Drive, not an internal fixed drive. Failure 7712  

More replies
Answer Match 73.92%

Hi,

Being in charge for the software deployment of our pc/notebooks in a rapidly changing corporate environment, there are two things I'd like to know:

- Do you know software that can create and ajust a "software/user/machine-inventory" in seconds? Copy/pasting in excel is getting a hassle, when pc's are changing owners like crazy now. We need to have a more clear view at what licenses are in use or not used at all in some cases.
- What paths should I consider, if I start to think of pushing software-upgrades (not windows updates), when the (+/-120) users don't have admin rights. I don't mean licensing but how to create an environment that is able to safely push software from our server to the workstations?

Thanks again for all your help!
 

More replies
Answer Match 73.92%

Does anyone know the best way to distribute your application?

I tried the packaging and deployment wizard, but it seems to not include some stuff. Also, it makes 2 files (setup.exe & cab file) I was hoping to get just one file if possible.

Can anyone shed some light on this, please.
Thanks
 

A:visual basic deployment

The p&d wizard actually creates 3 files, Setup.exe, MyApplication.CAB and Setup.lst all of these are necessary to deploy an application. You can use the Visual Studio installer to create a single .MSI file that works with the standard windows installer service if it is installed on the machine, if not then it is possible to package this with the actual installation package as well though again you may get multiple files required. If you use the standard installer, it is possible to use Winzip self-extractor or a similar program to create a single executable which extracts the necessary files and then runs the setup.exe on completion so that you only have the one file necessary.

As for things that are missing, it all depends on what it is, without knowing this it is difficult to suggest why or how to avoid this problem.
 

1 more replies
Answer Match 73.92%

First of all, thank you Tim for the code you replied with. Works perfectly.

The problem I'm having now is that I had to make some path changes to the dirctory path for the Access Database. Unfortunately, when I went to use the Package and deployment wizard again, it gave me a error 80004005 Automation Error Unspecified Error. I tried recreating the app from scratch copying the forms to the new project and reassigning my startup form. When I did that, the package and deployment wizard said that i need an exe for the project and gave me an option to compile. I hit the compile button and the error returned when trying to compile. I have no idea what to do. I have never seen this error before.

Before I tried creating the new project i tried to use the package and deployment wizard to rewrite the exe. It would not do it and returned the same error.

Please Help!!!!
 

A:VB6 Package and Deployment Wizard

After a great deal of struggling and fighting, i have finally found the error. It was two typos! I ran the app as a Start with Full Compile which will break on every error. I had two typos that killed the compile. Thanks to everyone who took the time to read my post!!!!
 

1 more replies
Answer Match 73.92%

We've got upwards of 400 workstations running Windows XP SP2. They also have the Novell Client 4.91 SP4 and network printers are managed through NDPS. Several months ago 20 new printers (IBM Infoprint 1532) were deployed across our LAN. Today I was told that the following changes need to be made by February: 1) In the printer driver properties, Enable the Duplexer 2) Under printing preferences, set Duplexing as the default. I was told that we techs need to physically touch each workstation to implement these changes. I've got a few ideas kicking around but I'd like to hear suggestions on the best way to automate this process to the greatest extent possible or at least be as efficient as possible. Is there a way to modify the printer configuration with an INF file and then deploy it via login script? Thanks in advance for all suggestions!
 

A:Printer Configuration Deployment

We don't have to many people around here that do Novell anymore. I haven't managed one in two years. I do have a friend who is a Netware admin for a large school district. I would bet he would have an answer for you. I will ask him.

But in the meantime, try posting your question on Netware specific forums.
http://www.coolsolutions.com/

Or the novell support forums.
 

2 more replies
Answer Match 73.92%

tl;dr:
"I would like to know if there is a way to back up the Windows 7 bootmgr in it's entirety (both what resides on the MBR and the needed files within my Windows 7 partition) and re-deploy them."

I would like to multi-boot Windows 7, Slackware (a Linux distro), a WIM installer for Windows (accessible via EasyBCD), and a floppy image installer for Slackware (also accessible via EasyBCD.)

I currently have this working, and a basic outline of my partition layout follows:
Disk 1
-MBR: Windows 7 bootmgr
-Partition 1: Windows 7
-Partition 2: Windows Installer WIM and Sources

Disk 2
-Partition 1: LILO and Slackware
-Partition 2: Swap Partition
-Partition 3: Personal Data Files
-Partition 4: Slackware Installer

Windows does some things while partitioning that I don't like (including seeing 500 MB less on my disc than is there, leaving unused space in the table which was odd to see.) I plan to use a utility on my Slackware installation to rectify that, but once I delete my Windows 7 partition I will have no way to reinstall Windows (as I will lose the MBR data pointing to the WIM installer.) I've been using Windows for about six months, but haven't used Slackware in almost a year and am not ready to dive back into it without a backup OS.

Suffice it to say I don't have media to make installation discs or usb sticks. (Since I know it seems like I'm trying to crack a wallnut with a sledgehammer. Or rather, use a sledgehammer to crack a walnut as use a sledgehammer to... Read more

A:Windows 7 MBR Recovery and Re-deployment

The simplest way to handle multi-booting with separate HD's is to install/repair with the other HD unplugged, then boot only via the BIOS boot order or one-time BIOS Boot Menu key.

If you do this then you don't need to worry about reimaging Win7 HD as it will contain its own boot files and not be interlocked or reliant upon the other HD, or vice versa. Just be sure to unplug the other HD during reinstall, repair or reimaging.

As to how to boot the other HD's multi-boots you can use GRUB for Linux which works better when it is restricted to Linux distros and not imposed on Win7.

Does this sound like a way to simplify what you want to do?

7 more replies
Answer Match 73.92%

Hi Everyone,
I am at a bit of a lose atm. I've created a deployment in MDT 2013 and I am unable to set the computer name, so that it shows in the properties window in Windows 7. I am also unable to install applications. I am deploying my image from a bootable USB and
have created the media for this in MDT 2013.
I have set the OSDComputerName=KAP-%SerialNumber% in the customsettings.ini and because this wasn't being set I have added it in the task sequence as the very last thing that it is to set (yet to test this part). This computer name is being set in the bios
but isn't reflected in Windows. Also the screen resolutions isn't being set. I've created an application bundle for the 5 applications I wish to install and I've set the 'Install Applications' task in the task sequence to 'Install a single application' and
pointed it to the application bundle. As you can see this task is running in the 'State Restore' area. I have recently disabled all the tasks in the 'Imaging' section at the end, as I feel that this is overwriting everything that has been set. I am yet to
test this new deployment.
I am not entirely sure where I am going wrong and I am on my last nerve with this. The deployment image is something that management is waiting on as we have a number of computers to deploy. The problem with this is that contrary to popular belief it is
not easy to get working. If anyone has any ideas or questions please let me know ASAP. Just for reference, I am in Sydney, A... Read more

More replies
Answer Match 73.08%

Currently looking for imaging software where I can throw an image on the server, and roll it out simultaneously to a bunch of different types of machines, all running XP.

Looked into Acronis TI, but license per machine. Would rather have a site license, not per individual machine. Also do not need incremental backups, just looking for a image deployment solution.

Also, how exactly does mass deployment work with computers of different hardware? All machines are dell, but some are newer than others, and newer ones are constantly coming in....how are any driver issues handled on the base image when rolling out an XP OS?

A:Imaging, mass deployment to xp machines

Each image needs to be unique for the hardware its going on.

Have you investigated Windows deployment services?
Windows Deployment Services Getting Started Guide

3 more replies
Answer Match 73.08%

I would like to install windows 8.1 in my laptop.Kindly inform me the details about the installation process

More replies
Answer Match 73.08%

Quote:




As Joe mentioned in this blog post, the amount of interest in the Windows 10 preview has been phenomenal. We appreciate that IT pros are trying out the new features and providing feedback. But more importantly, we appreciate the sheer number of devices that you are upgrading from previous versions of Windows ? whether from Windows 7, Windows 8, or Windows 8.1. The telemetry from these upgrades enables us to further streamline and improve the upgrade process ? important because this is the primary way we expect organizations to deploy Windows 10.

In my blog post on September 30th, we introduced this idea of having a simpler deployment process, using an in-place upgrade instead of the traditional wipe-and-load approach that organizations have historically used to deploy new Windows versions. This upgrade process is designed to preserve the apps, data, and configuration from the existing Windows installation, taking care to put things back the way they need to be after Windows 10 has been installed on the system.

Of course it?s critical that at the same time we do everything we can to ensure that existing apps ?just work.? We understand the challenges that many organizations experienced as part of their Windows XP to Windows 7 migrations, and are working hard to ensure that compatibility between Windows 7, Windows 8 and Windows 10 is excellent. This also applies to hardware: we are designing Windows 10 to have the same ov... Read more

More replies
Answer Match 73.08%

Greetings,

Okay. Currently I am developing a Private File Sharing Server and Client Application in Visual Studio.NET 2003 with Visual Basic. Well, after programming it, and etc and it works great when I run it via my computer, both the Server and the Client, but when I run the Setup file for the Client on another computer, I get the following message (see screenshot below):

But, when I go to the Control Panel and stuff and check to see what .NET version is on the computer that Im trying to install the Client on, I have version 2.0 (see screenshot below):

So, now my question is, how could I fix this so that the message will not appear anymore? I really would like to get this too work as soon as possible. Thank-you very much in advanced.
 

A:Solved: Deployment needing .NET Framework Help

6 more replies
Answer Match 73.08%

Hi 
I have installed MDT 2013, AIK and WDS on a Server 2012 R2 VM. I have created my deployment shares and Task sequences and everything seems to be ok. When i try to Sysprep and capture a Windows 7 machine by browsing to the deployment share, scripts folder
and then clicking on the LiteTouch.vbs, the windows 7 machine reboots after checking for updates and then the Deployment Wizard is blank, so i cannot continue or see any options. Has anyone seen this before? The windows 7 reference machine is a VM if that
helps.
Thanks
Shane

More replies
Answer Match 73.08%

Hiya

This document provides guidance for deploying .NET applications. It discusses the issues and processes that developers should adopt to deploy distributed .NET Applications. It includes discussions on using Visual Studio.NET deployment tools, and provides guidance on using distribution mechanisms, including Application Center, Active Directory and Microsoft Systems Management Server. It also includes guidance on upgrading .NET applications once they have been installed in the production environment

System Requirements

Adobe Acrobat 4.0

Operating System - Windows 2000
http://www.microsoft.com/downloads/release.asp?ReleaseID=40545&area=search&ordinal=1

Regards

eddie
 

More replies
Answer Match 73.08%

Pop-up said, "Firefox has determined that the following add-ons are known to cause stability or security problems.

JAVA Deployment toolkit 6.0.190/4 6.0/190.4

For your protection, it is highly recommended that you restart with these add-ons disabled."

I have 3 JAVAs and none are named "deployment toolkit". Have java.exe, javaw.exe, javaws.exe.

If this is a problem/threat, how do I solve it?

Thank you ST
 

A:Solved: JAVA Deployment toolkit 6.0.190/4 6.0/190.4

You sure you install the right Java?

http://java.sun.com/javase/downloads/index.jsp

Look and there are the "Java SE Development Kit" versions also.

You want "Java Platform, Standard Edition", JDK 6 Update 20, (JRE).

Note: To develop Java applications and applets, you need the JDK (Java Development Kit), which includes the JRE.

So you want Download JRE

Get the JavaRa to help you uninstall the java and clean things up. Then install the Download JRE
http://raproducts.org/
 

3 more replies
Answer Match 73.08%

Hi,

I changd the user profile to default (manually) and did some Favorites links to IE.
When i was satisfied with the customization i created Ghost image. Successfully created image and when deployed i recived a message regarding NTFS volume and wehn the image is deployed , client start up and OS initilization appears .... then system run SCAN DISK showing message that "C" drive needs to be checked. After that OS installed successfully and customizations were also OK.
Any idea how to avoide the scan disk issue ?

A:customized Image deployment with Ghost

Nope. Windows sees the hard disk "environment" as not being 100% on par with what it used to be. Plus it doesn't hurt to run it after an image deployment like that anyways

PS: I know the mod's may bring this up, but no need for double posting in multiple categories

4 more replies
Answer Match 73.08%

I have a WDS server locally and it works just fine. However, we have several remote locations that are connected through an MPLS. I am able to perform a Network Boot and access the WDS Server. Unfortunately, when I attempt to deploy the image across the MPLS, the installation takes way too long.

I would like to set up a share at each of my remote (MPLS) locations that the images can be pulled from. I want to avoid setting up a WDS Server at each location as it would be a mismanagement of resources for the number of people/PC's at the locations.

Is it possible to set up local shares at the remote locations and configure the WDS Server pull the images from those local shares?
 

More replies
Answer Match 73.08%

Hi, I had a couple of questions regarding Windows 7 Deployment. Not sure if this is the right subforum to post to, but it seemed the best fit.

One: I tried using sysprep with an answer file to configure a different product key by adding the Microsoft-Windows-Shell-Setup component to the Specialize pass and configuring ProductKey setting (I should mention that this was the only setting I configured). When rebooting to the image after sysprep (for testing), it errors out and the image is useless. I'm wondering if I am configuring the wrong setting, leaving blank settings that need to be configured, or if maybe I am adding it to the wrong pass. From what I understand the specialize pass is the first pass to run at startup after running /generalize.

Two: I tried running sysprep again (after re-installing to my test partition of course) without the answer file and everything worked fine. However, I was under the impression that without configuring the PersistAllDeviceInstalls setting in an answer file, all the device drivers would be uninstalled. Yet when I logged on, to my surprise, all my drivers remained. This is a good thing in my opinion, but I want to make absolutely sure that it wasn't a fluke and that device drivers are not typically uninstalled when running /generalize.

If anybody can help me out with this I would very much appreciate it. Thanks.

A:Deployment: sysprep and answer files

Do not currently have any answers to your questions, but may want to review: Deploying Windows 7 - Part 1: Windows AIK 2.0 Enhancements

3 more replies
Answer Match 73.08%

Hello All

This is my first post here. I've been working on a new computer for myself and last night after getting all the parts together I tried to install Windows Ultimate 64 bit. I got as far as the part where windows starts copying new files and got the following message.

Windows setup cannot reinitialize the deployment engine. To start windows restart the installation.


The specs for my new computer are below.


Case - Lian Li PC-G70B/Silerstone 850w PSU

OS - Vista Ultimate 64-bit

Mainboard - Gigabyte x48T-DQ6

CPU - Intel e8400/Thermalright Ultra-120

Memory - G.Skill DDR3 1600 (2x2048)

GPU - 2x HIS HD3870 Ice3 Turbo (512 MB)

Sound Card - X-Fi Fatality XtremeGamer

Optical - Plextor PX760a, PX-810SA


I sure would appreciate any help or suggestions anyone might have.


Thanks in advance.

A:[SOLVED] Cannot Reinitialize Deployment Engine

Quote:





Originally Posted by tambor198


Hello All

This is my first post here. I've been working on a new computer for myself and last night after getting all the parts together I tried to install Windows Ultimate 64 bit. I got as far as the part where windows starts copying new files and got the following message.

Windows setup cannot reinitialize the deployment engine. To start windows restart the installation.


The specs for my new computer are below.


Case - Lian Li PC-G70B/Silerstone 850w PSU

OS - Vista Ultimate 64-bit

Mainboard - Gigabyte x48T-DQ6

CPU - Intel e8400/Thermalright Ultra-120

Memory - G.Skill DDR3 1600 (2x2048)

GPU - 2x HIS HD3870 Ice3 Turbo (512 MB)

Sound Card - X-Fi Fatality XtremeGamer

Optical - Plextor PX760a, PX-810SA


I sure would appreciate any help or suggestions anyone might have.


Thanks in advance.







Hi tambor198. . .

Welcome to the Tech Support Forum - Vista Support!

If you partitioned the hard drive prior to installing Vista, I suggest that you try the install again and let Vista re-format the entire hard drive and let Vista dictate the placement of the Operating System (OS) files.

You should also keep an eye on THIS remarkably similar thread in another forum that was posted just 12 minutes after this one - and has received a response. Good Luck to you.

Regards. . .

jcgriff2

5 more replies
Answer Match 73.08%

Hiya

The first of six books in the Windows Server 2003 Deployment Kit, this book provides guidelines for planning, testing, and piloting the deployment of Windows Server 2003 and Windows XP Professional operating systems in medium and large organizations. IT professionals can use this book to create a comprehensive project plan, which serves as a framework for designing and deploying complex technologies and operating system features. A key component of this book is a roadmap that summarizes each of the chapters in the kit. The roadmap can be used to match business solutions with the design guidelines discussed in the kit. In addition, because testing and piloting are critical tasks in any deployment project, this book contains guidelines for designing and setting up a test lab, testing applications and resolving application compatibility issues, and designing and implementing a pilot project.

System Requirements
Supported Operating Systems: Windows Server 2003

Adobe Acrobat Reader version 5.0 or later
http://www.microsoft.com/downloads/...e7-dd1a-4369-b1c1-5ca32f6a6ae5&DisplayLang=en

Regards

eddie
 

More replies
Answer Match 73.08%

Hiya

IIS 6.0 provides the services to support a secure, available, and scalable Web server on which to run your Web sites and applications. This book provides prescriptive, task-based, and scenario-based guidance to help you design an IIS 6.0 solution that meets the specific needs of your organization. Deployment scenarios include installing a new Web server, upgrading an existing Web server from an earlier version of IIS, and migrating existing Apache or IIS Web sites and applications to a newly installed Web server.
System Requirements
Supported Operating Systems: Windows Server 2003

Adobe Acrobat Reader version 5.0 or later

http://www.microsoft.com/downloads/...d5-03db-46d2-9f34-596edd039eb9&DisplayLang=en

Regards

eddie
 

More replies
Answer Match 73.08%

Hello great team, I have a little challenge with my ATA POC deployment for a customer.
Scenario:

Two physical domain controllers (DC1 and DC2) for monitoring (No VM DC at all)One virtual ATA center server
One virtual ATA gateway server Both ATA servers are on different hyper-v hostATA gateway's hyper-v host is connected to the same physical switch as DC1DC2 is on another physical switch
What I did:

Set the Mirroring mode of the ATA gateway to "Destination".Set the Mirror mode on the External port of the virtual switch the ATA gateway is attached to reflect the "Source".I am using only one NIC for ATA gateway
Result:

Netmon 3.4 is showing traffic to/fro the two DCs (protocol name=LDAPSASBuffer)It has learned virtually all the AD objects and I can search for users and computer objects successfully
Problem:

No suspicious activities even after several DNS reconnaissance attack simulationThe Center log shows some brute forced attacks but it is still saying "No suspicious activities" on the attack timeline.
I need help here please.

More replies