Tech Problem Aggregator

computer cycled through chkdsk, now computer has missing dll file

Q: computer cycled through chkdsk, now computer has missing dll file

I am now able to start computer without going through chkdsk, but I get a message.
 
The message says that mfc110u.dll is missing from my computer.  Try reinstalling and restarting.
 
 
 
Something to that effect.  And directly behind this dialog box are two others that says file download"   The one on top " do you want to open or save this file"   the file name is index.html       It is a firefox file and it will be saved to   C: Users/Daniel/ ...... etc.     The other dialog box shows a file being downloaded.   So strange.  Also I occasionally see a message about Windows needing to be genuine

A: computer cycled through chkdsk, now computer has missing dll file

here is the minitoolbox results:
 
 
MiniToolBox by Farbar  Version: 21-07-2014
Ran by Daniel (administrator) on 12-10-2014 at 22:00:33
Running from "C:\Users\Daniel\Downloads"
Windows 7 Home Premium Service Pack 1 (X86)
Boot Mode: Normal
***************************************************************************
========================= Flush DNS: ===================================
Windows IP Configuration
Successfully flushed the DNS Resolver Cache.
========================= IE Proxy Settings: ==============================
Proxy is not enabled.
No Proxy Server is set.
 
"Reset IE Proxy Settings": IE Proxy Settings were reset.
 
========================= FF Proxy Settings: ==============================
 
"Reset FF Proxy Settings": Firefox Proxy settings were reset.
========================= Hosts content: =================================
 
========================= IP Configuration: ================================
 
# ----------------------------------
# IPv4 Configuration
# ----------------------------------
pushd interface ipv4
 
reset
set global icmpredirects=enabled
add route prefix=169.254.0.0/16 interface="iftype0_0" nexthop=192.168.1.7 metric=1 publish=Yes
 
popd
# End of IPv4 configuration
 
 
Windows IP Configuration
 
   Host Name . . . . . . . . . . . . : Daniel-msi
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
 
Wireless LAN adapter Wireless Network Connection:
 
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : 802.11bgn 1T1R Mini Card Wireless Adapter
   Physical Address. . . . . . . . . : 40-61-86-43-8B-00
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::75bb:6f7f:f90a:fe69%11(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.8(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Sunday, October 12, 2014 8:23:52 AM
   Lease Expires . . . . . . . . . . : Monday, October 13, 2014 9:54:04 PM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : 205545862
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-CA-68-33-40-61-86-18-72-10
   DNS Servers . . . . . . . . . . . : 192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : NVIDIA nForce 10/100/1000 Mbps Ethernet
   Physical Address. . . . . . . . . : 40-61-86-18-72-10
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::6135:36ed:6378:8d54%10(Deprecated)
   Autoconfiguration IPv4 Address. . : 169.254.141.84(Tentative)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                       fec0:0:0:ffff::2%1
                                       fec0:0:0:ffff::3%1
   NetBIOS over Tcpip. . . . . . . . : Enabled
 
Tunnel adapter isatap.{6C2213EC-ED0E-489B-92B1-47BFED634941}:
 
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{13F0D9B1-99B4-4A92-A7C4-84DEF28F053F}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
 
Tunnel adapter Local Area Connection* 9:
 
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Server:  UnKnown
Address:  192.168.1.1
Name:    google.com
Addresses:  2607:f8b0:400a:800::1005
      173.194.33.166
      173.194.33.168
      173.194.33.165
      173.194.33.162
      173.194.33.163
      173.194.33.160
      173.194.33.167
      173.194.33.169
      173.194.33.164
      173.194.33.174
      173.194.33.161
 
Pinging google.com [173.194.33.98] with 32 bytes of data:
Reply from 173.194.33.98: bytes=32 time=12ms TTL=55
Reply from 173.194.33.98: bytes=32 time=14ms TTL=55
 
Ping statistics for 173.194.33.98:
    Packets: Sent = 2, Received = 2, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 12ms, Maximum = 14ms, Average = 13ms
Server:  UnKnown
Address:  192.168.1.1
Name:    yahoo.com
Addresses:  98.138.253.109
      98.139.183.24
      206.190.36.45
 
Pinging yahoo.com [98.139.183.24] with 32 bytes of data:
Reply from 98.139.183.24: bytes=32 time=93ms TTL=49
Reply from 98.139.183.24: bytes=32 time=91ms TTL=49
Ping statistics for 98.139.183.24:
    Packets: Sent = 2, Received = 2, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 91ms, Maximum = 93ms, Average = 92ms
 
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
 
Ping statistics for 127.0.0.1:
    Packets: Sent = 2, Received = 2, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
===========================================================================
Interface List
11...40 61 86 43 8b 00 ......802.11bgn 1T1R Mini Card Wireless Adapter
10...40 61 86 18 72 10 ......NVIDIA nForce 10/100/1000 Mbps Ethernet
  1...........................Software Loopback Interface 1
17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
18...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
===========================================================================
 
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0      192.168.1.1      192.168.1.8     25
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    306
        127.0.0.1  255.255.255.255         On-link         127.0.0.1    306
  127.255.255.255  255.255.255.255         On-link         127.0.0.1    306
      169.254.0.0      255.255.0.0      192.168.1.7      192.168.1.8     26
      192.168.1.0    255.255.255.0         On-link       192.168.1.8    281
      192.168.1.8  255.255.255.255         On-link       192.168.1.8    281
    192.168.1.255  255.255.255.255         On-link       192.168.1.8    281
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    306
        224.0.0.0        240.0.0.0         On-link       192.168.1.8    281
  255.255.255.255  255.255.255.255         On-link         127.0.0.1    306
  255.255.255.255  255.255.255.255         On-link       192.168.1.8    281
===========================================================================
Persistent Routes:
  Network Address          Netmask  Gateway Address  Metric
      169.254.0.0      255.255.0.0      192.168.1.7       1
===========================================================================
 
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination      Gateway
  1    306 ::1/128                  On-link
11    281 fe80::/64                On-link
11    281 fe80::75bb:6f7f:f90a:fe69/128
                                    On-link
  1    306 ff00::/8                 On-link
11    281 ff00::/8                 On-link
===========================================================================
Persistent Routes:
  None
========================= Winsock entries =====================================
Catalog5 01 C:\Windows\system32\NLAapi.dll [52224] (Microsoft Corporation)
Catalog5 02 C:\Windows\system32\napinsp.dll [52224] (Microsoft Corporation)
Catalog5 03 C:\Windows\system32\pnrpnsp.dll [65024] (Microsoft Corporation)
Catalog5 04 C:\Windows\system32\pnrpnsp.dll [65024] (Microsoft Corporation)
Catalog5 05 C:\Program Files\Bonjour\mdnsNSP.dll [121704] (Apple Inc.)
Catalog5 06 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog5 07 C:\Windows\system32\winrnr.dll [20992] (Microsoft Corporation)
Catalog9 01 C:\Program Files\NVIDIA Corporation\NetworkAccessManager\bin32\nvLsp.dll [268832] (NVIDIA)
Catalog9 02 C:\Program Files\NVIDIA Corporation\NetworkAccessManager\bin32\nvLsp.dll [268832] (NVIDIA)
Catalog9 03 C:\Program Files\NVIDIA Corporation\NetworkAccessManager\bin32\nvLsp.dll [268832] (NVIDIA)
Catalog9 04 C:\Program Files\NVIDIA Corporation\NetworkAccessManager\bin32\nvLsp.dll [268832] (NVIDIA)
Catalog9 05 C:\Program Files\NVIDIA Corporation\NetworkAccessManager\bin32\nvLsp.dll [268832] (NVIDIA)
Catalog9 06 C:\Program Files\NVIDIA Corporation\NetworkAccessManager\bin32\nvLsp.dll [268832] (NVIDIA)
Catalog9 07 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 08 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 09 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 10 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 11 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 12 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 13 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 14 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 15 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 16 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 17 C:\Program Files\NVIDIA Corporation\NetworkAccessManager\bin32\nvLsp.dll [268832] (NVIDIA)
Catalog9 18 C:\Program Files\NVIDIA Corporation\NetworkAccessManager\bin32\nvLsp.dll [268832] (NVIDIA)
Catalog9 19 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 20 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 21 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 22 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 23 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 24 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 25 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 26 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 27 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 28 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 29 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 30 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 31 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 32 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 33 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 34 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 35 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 36 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 37 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
Catalog9 38 C:\Windows\system32\mswsock.dll [231424] (Microsoft Corporation)
========================= Event log errors: ===============================
Application errors:
==================
Error: (10/12/2014 09:58:55 PM) (Source: Microsoft-Windows-CAPI2) (User: )
Description: The Cryptographic Services service failed to initialize the Catalog Database. The ESENT error was: -107.
 
Error: (10/12/2014 09:58:55 PM) (Source: Microsoft-Windows-CAPI2) (User: )
Description: The Cryptographic Services service failed to initialize the Catalog Database. The ESENT error was: -107.
Error: (10/12/2014 09:58:55 PM) (Source: Microsoft-Windows-CAPI2) (User: )
Description: The Cryptographic Services service failed to initialize the Catalog Database. The ESENT error was: -107.
 
Error: (10/12/2014 09:54:14 PM) (Source: Microsoft-Windows-CAPI2) (User: )
Description: The Cryptographic Services service failed to initialize the Catalog Database. The ESENT error was: -107.
Error: (10/12/2014 09:54:14 PM) (Source: Microsoft-Windows-CAPI2) (User: )
Description: The Cryptographic Services service failed to initialize the Catalog Database. The ESENT error was: -107.
 
Error: (10/12/2014 09:54:14 PM) (Source: Microsoft-Windows-CAPI2) (User: )
Description: The Cryptographic Services service failed to initialize the Catalog Database. The ESENT error was: -107.
Error: (10/12/2014 09:54:13 PM) (Source: Microsoft-Windows-CAPI2) (User: )
Description: The Cryptographic Services service failed to initialize the Catalog Database. The ESENT error was: -107.
 
Error: (10/12/2014 09:54:13 PM) (Source: Microsoft-Windows-CAPI2) (User: )
Description: The Cryptographic Services service failed to initialize the Catalog Database. The ESENT error was: -107.
Error: (10/12/2014 09:54:13 PM) (Source: Microsoft-Windows-CAPI2) (User: )
Description: The Cryptographic Services service failed to initialize the Catalog Database. The ESENT error was: -107.
 
Error: (10/12/2014 09:54:05 PM) (Source: Microsoft-Windows-CAPI2) (User: )
Description: The Cryptographic Services service failed to initialize the Catalog Database. The ESENT error was: -107.
 
System errors:
=============
Error: (10/12/2014 09:54:14 PM) (Source: Service Control Manager) (User: )
Description: The Peer Name Resolution Protocol service terminated with the following error:
%%-2140993535
 
Error: (10/12/2014 09:54:14 PM) (Source: Service Control Manager) (User: )
Description: The Peer Networking Grouping service depends on the Peer Name Resolution Protocol service which failed to start because of the following error:
%%-2140993535
 
Error: (10/12/2014 09:54:14 PM) (Source: PNRPSvc) (User: )
Description: 0x80630801
Error: (10/12/2014 09:54:06 PM) (Source: Service Control Manager) (User: )
Description: The Peer Networking Grouping service depends on the Peer Name Resolution Protocol service which failed to start because of the following error:
%%-2140993535
Error: (10/12/2014 09:54:06 PM) (Source: Service Control Manager) (User: )
Description: The Peer Name Resolution Protocol service terminated with the following error:
%%-2140993535
Error: (10/12/2014 09:54:06 PM) (Source: PNRPSvc) (User: )
Description: 0x80630801
 
Error: (10/12/2014 09:54:05 PM) (Source: Service Control Manager) (User: )
Description: The Peer Networking Grouping service depends on the Peer Name Resolution Protocol service which failed to start because of the following error:
%%-2140993535
 
Error: (10/12/2014 09:54:05 PM) (Source: Service Control Manager) (User: )
Description: The Peer Name Resolution Protocol service terminated with the following error:
%%-2140993535
 
Error: (10/12/2014 09:54:05 PM) (Source: PNRPSvc) (User: )
Description: 0x80630801
Error: (10/12/2014 02:30:25 PM) (Source: Disk) (User: )
Description: The device, \Device\Harddisk0\DR0, has a bad block.
 
Microsoft Office Sessions:
=========================
Error: (10/12/2014 09:58:55 PM) (Source: Microsoft-Windows-CAPI2)(User: )
Description: -107
 
Error: (10/12/2014 09:58:55 PM) (Source: Microsoft-Windows-CAPI2)(User: )
Description: -107
Error: (10/12/2014 09:58:55 PM) (Source: Microsoft-Windows-CAPI2)(User: )
Description: -107
 
Error: (10/12/2014 09:54:14 PM) (Source: Microsoft-Windows-CAPI2)(User: )
Description: -107
Error: (10/12/2014 09:54:14 PM) (Source: Microsoft-Windows-CAPI2)(User: )
Description: -107
 
Error: (10/12/2014 09:54:14 PM) (Source: Microsoft-Windows-CAPI2)(User: )
Description: -107
Error: (10/12/2014 09:54:13 PM) (Source: Microsoft-Windows-CAPI2)(User: )
Description: -107
 
Error: (10/12/2014 09:54:13 PM) (Source: Microsoft-Windows-CAPI2)(User: )
Description: -107
Error: (10/12/2014 09:54:13 PM) (Source: Microsoft-Windows-CAPI2)(User: )
Description: -107
 
Error: (10/12/2014 09:54:05 PM) (Source: Microsoft-Windows-CAPI2)(User: )
Description: -107
 
=========================== Installed Programs ============================
Adobe Flash Player 10 ActiveX (HKLM\...\{24762012-C6C8-4AAD-A02D-71A009FA1683}) (Version: 10.0.42.34 - Adobe Systems, Inc.)
Adobe Flash Player 15 Plugin (HKLM\...\Adobe Flash Player Plugin) (Version: 15.0.0.152 - Adobe Systems Incorporated)
Adobe Photoshop Elements 11 (HKLM\...\Adobe Photoshop Elements 11) (Version: 11.0 - Adobe Systems Incorporated)
Adobe Photoshop Elements 11 (Version: 11.0 - Adobe Systems Incorporated) Hidden
Adobe Reader XI (11.0.09) (HKLM\...\{AC76BA86-7AD7-1033-7B44-AB0000000001}) (Version: 11.0.09 - Adobe Systems Incorporated)
Apple Application Support (HKLM\...\{78002155-F025-4070-85B3-7C0453561701}) (Version: 3.0.6 - Apple Inc.)
Apple Mobile Device Support (HKLM\...\{C0CC75CD-F5B7-46AD-B016-17C0F5171718}) (Version: 8.0.0.23 - Apple Inc.)
Apple Software Update (HKLM\...\{789A5B64-9DD9-4BA5-915A-F0FC0A1B7BFE}) (Version: 2.1.3.127 - Apple Inc.)
ArcSoft Magic-i Visual Effects 2 (HKLM\...\{8E90189A-A5D4-4C0E-A908-06C4236F98EE}) (Version: 2.0.10.94 - ArcSoft)
ArcSoft Print Creations - Album Page (HKLM\...\{E6B4117F-AC59-4B13-9274-EB136E8897EE}) (Version:  - ArcSoft)
ArcSoft Print Creations - Brochures & Flyers (HKLM\...\{01A1A019-E1D8-482A-BE17-5E118D17C0A0}) (Version:  - ArcSoft)
ArcSoft Print Creations - Funhouse (HKLM\...\{9591C049-5CAE-4E89-A8D9-191F1899628B}) (Version:  - ArcSoft)
ArcSoft Print Creations - Funhouse II (HKLM\...\{3CE47E6B-AE27-4E40-AC54-329EED96B933}) (Version:  - ArcSoft)
ArcSoft Print Creations - Greeting Card (HKLM\...\{F04F9557-81A9-4293-BC49-2C216FA325A7}) (Version:  - ArcSoft)
ArcSoft Print Creations - Photo Book (HKLM\...\{56589DFE-0C29-4DFE-8E42-887B771ECD23}) (Version:  - ArcSoft)
ArcSoft Print Creations - Photo Calendar (HKLM\...\{CA9ED5E4-1548-485B-A293-417840060158}) (Version:  - ArcSoft)
ArcSoft Print Creations - Photo Prints (HKLM\...\{95F875CC-1B85-43E6-B3E0-13EA04F3D995}) (Version:  - ArcSoft)
ArcSoft Print Creations - Poster Creator (HKLM\...\{5D1C82E7-7EC0-4404-A8AD-36C3B444BC34}) (Version:  - ArcSoft)
ArcSoft Print Creations - Scrapbook (HKLM\...\{B0D83FCD-9D42-43ED-8315-250326AADA02}) (Version:  - ArcSoft)
ArcSoft Print Creations - Slimline Card (HKLM\...\{007B37D9-0C45-4202-834B-DD5FAAE99D63}) (Version:  - ArcSoft)
ArcSoft Print Creations (HKLM\...\{C5D7039E-0803-4FE8-976D-156DE1147E4F}) (Version: 3.0.255.407 - ArcSoft)
ArcSoft WebCam Companion 3 (HKLM\...\{25478065-4CB1-448C-80E4-8C4529017EE3}) (Version: 3.0.32.221 - ArcSoft)
avast! Free Antivirus (HKLM\...\Avast) (Version: 9.0.2021 - AVAST Software)
BitZipper 2013 (HKLM\...\BitZipper_is1) (Version: 2013.13.4.16 - Bitberry Software)
Bonjour (HKLM\...\{79155F2B-9895-49D7-8612-D92580E0DE5B}) (Version: 3.0.0.10 - Apple Inc.)
BurnRecovery (HKLM\...\{2892E1B7-E24D-4CCB-B8A7-B63D4B66F89F}) (Version: 3.0.912.401 - Micro-Star International Co., Ltd.)
Canon IJ Network Scanner Selector EX (HKLM\...\Canon_IJ_Network_Scanner_Selector_EX) (Version:  - )
Canon IJ Network Tool (HKLM\...\Canon_IJ_Network_UTILITY) (Version: 3.1.1 - Canon Inc.)
Canon MP Navigator EX 4.1 (HKLM\...\MP Navigator EX 4.1) (Version:  - )
Canon MX880 series MP Drivers (HKLM\...\{1199FAD5-9546-44f3-81CF-FFDB8040B7BF}_Canon_MX880_series) (Version:  - Canon Inc.)
Definition Update for Microsoft Office 2010 (KB982726) 32-Bit Edition (HKLM\...\{90140000-0011-0000-0000-0000000FF1CE}_Office14.PROPLUS_{650DE870-ECA3-4E63-8D77-778512BE5D4C}) (Version:  - Microsoft)
Elements 11 Organizer (Version: 11.0 - Adobe Systems Incorporated) Hidden
Finger Sensing Pad Driver (HKLM\...\{E86906FF-C63D-4EAF-ACE7-5F8D55FBEA9A}) (Version: 8.5.6.4 - Sentelic)
Google Drive (HKLM\...\{C6640705-7479-4EE5-BC86-879F05F65E74}) (Version: 1.17.7290.4094 - Google, Inc.)
Google Update Helper (Version: 1.3.24.15 - Google Inc.) Hidden
iCloud (HKLM\...\{00A61104-74B5-4056-AD00-4397EF4FB141}) (Version: 3.1.0.40 - Apple Inc.)
iTunes (HKLM\...\{F32DC846-4457-40A8-BECA-BCC0E960BC53}) (Version: 11.4.0.18 - Apple Inc.)
KMSpico v9.2.3 (HKLM\...\KMSpico_is1) (Version: 9.2.3 - )
Malwarebytes Anti-Malware version 2.0.2.1012 (HKLM\...\Malwarebytes Anti-Malware_is1) (Version: 2.0.2.1012 - Malwarebytes Corporation)
Microsoft .NET Framework 4.5.1 (HKLM\...\{92FB6C44-E685-45AD-9B20-CADF4CABA132} - 1033) (Version: 4.5.50938 - Microsoft Corporation)
Microsoft .NET Framework 4.5.1 (Version: 4.5.50938 - Microsoft Corporation) Hidden
Microsoft Office Access MUI (English) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office Access Setup Metadata MUI (English) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office Excel MUI (English) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office Groove MUI (English) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office InfoPath MUI (English) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office OneNote MUI (English) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office Outlook Connector (HKLM\...\{95140000-0081-0409-0000-0000000FF1CE}) (Version: 14.0.6123.5001 - Microsoft Corporation)
Microsoft Office Outlook MUI (English) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office PowerPoint MUI (English) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office Professional Plus 2010 (HKLM\...\Office14.PROPLUS) (Version: 14.0.4734.1000 - Microsoft Corporation)
Microsoft Office Professional Plus 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office Proof (English) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office Proof (French) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office Proof (Spanish) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office Proofing (English) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office Publisher MUI (English) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office Shared MUI (English) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office Shared Setup Metadata MUI (English) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Office Suite Activation Assistant (HKLM\...\{E50AE784-FABE-46DA-A1F8-7B6B56DCB22E}) (Version: 2.9 - Microsoft Corporation)
Microsoft Office Word MUI (English) 2010 (Version: 14.0.4734.1000 - Microsoft Corporation) Hidden
Microsoft Silverlight (HKLM\...\{89F4137D-6C26-4A84-BDB8-2E5A4BB71E00}) (Version: 5.1.30514.0 - Microsoft Corporation)
Microsoft Visual C++ 2005 Redistributable (HKLM\...\{710f4c1c-cc18-4c49-8cbf-51240c89a1a2}) (Version: 8.0.61001 - Microsoft Corporation)
Mozilla Firefox 32.0.3 (x86 en-US) (HKLM\...\Mozilla Firefox 32.0.3 (x86 en-US)) (Version: 32.0.3 - Mozilla)
Mozilla Maintenance Service (HKLM\...\MozillaMaintenanceService) (Version: 29.0.1 - Mozilla)
msi Software Install (HKLM\...\{07690F1C-04B1-4060-9691-6748ED1826B9}) (Version: 3.0.911.2701 - msi)
NVIDIA Drivers (HKLM\...\NVIDIA Drivers) (Version: 1.3 - NVIDIA Corporation)
NVIDIA ForceWare Network Access Manager (HKLM\...\InstallShield_{7CFA46E3-CC2F-4355-82AE-6012DC3633FD}) (Version: 1.00.7316 - NVIDIA Corporation)
NVIDIA ForceWare Network Access Manager (Version: 1.00.7316 - NVIDIA Corporation) Hidden
PSE11 STI Installer (Version: 11.0 - Adobe Systems Incorporated) Hidden
Realtek High Definition Audio Driver (HKLM\...\{F132AF7F-7BCA-4EDE-8A7C-958108FE7DBC}) (Version: 6.0.1.5859 - Realtek Semiconductor Corp.)
Realtek USB 2.0 Card Reader (HKLM\...\{96AE7E41-E34E-47D0-AC07-1091A8127911}) (Version: 6.1.7100.30093 - Realtek Semiconductor Corp.)
Skype Click to Call (HKLM\...\{6D1221A9-17BF-4EC0-81F2-27D30EC30701}) (Version: 7.3.16540.9015 - Microsoft Corporation)
Skype™ 6.20 (HKLM\...\{24991BA0-F0EE-44AD-9CC8-5EC50AECF6B7}) (Version: 6.20.104 - Skype Technologies S.A.)
System Control Manager (HKLM\...\{ED9C5D25-55DF-48D8-9328-2AC0D75DE5D8}) (Version: 2.209.0724.004.10 - Micro-Star International Co., Ltd.)
TI Connect™ (HKLM\...\{D06BA64C-4447-49B4-B99D-E85BEA9E1035}) (Version: 4.0.0.218 - Texas Instruments Inc.)
Update for Microsoft Office 2010 (KB2494150) (HKLM\...\{90140000-0011-0000-0000-0000000FF1CE}_Office14.PROPLUS_{3FCFD88F-4D13-4F38-8625-ABABEA7F61EA}) (Version:  - Microsoft)
Update for Microsoft Office 2010 (KB2760631) 32-Bit Edition (HKLM\...\{90140000-0011-0000-0000-0000000FF1CE}_Office14.PROPLUS_{35698CB7-AAA2-4577-B505-DBFF504AEF23}) (Version:  - Microsoft)
Update for Microsoft Office 2010 (KB2825640) 32-Bit Edition (HKLM\...\{90140000-0011-0000-0000-0000000FF1CE}_Office14.PROPLUS_{BA610006-2C39-4419-9834-CF61AB24810A}) (Version:  - Microsoft)
VLC media player (HKLM\...\VLC media player) (Version: 2.1.5 - VideoLAN)
Vuze (HKLM\...\8461-7759-5462-8226) (Version: 5.4.0.0 - Azureus Software, Inc.)
WinDirStat 1.1.2 (HKCU\...\WinDirStat) (Version:  - )
WinRAR archiver (HKLM\...\WinRAR archiver) (Version:  - )
YNAB 4 version 4.3.624 (HKLM\...\com.ynab.YNAB4.LiveCaptive_is1) (Version: 4.3.624 - YouNeedABudget.com)
========================= Memory info: ===================================
Percentage of memory in use: 31%
Total physical RAM: 2815.24 MB
Available physical RAM: 1940.44 MB
Total Pagefile: 5628.77 MB
Available Pagefile: 4621.27 MB
Total Virtual: 2047.88 MB
Available Virtual: 1953.02 MB
========================= Partitions: =====================================
1 Drive c: (OS_Install) (Fixed) (Total:172.79 GB) (Free:28.48 GB) NTFS
2 Drive d: (Data) (Fixed) (Total:115.2 GB) (Free:73.12 GB) NTFS
 
========================= Users: ========================================
 
User accounts for \\DANIEL-MSI
 
Administrator            Daniel                   Guest                   
 
**** End of log ****

7 more replies
Answer Match 63%

Good morning/afternoon/evening.

Will try to keep this as short as possible.

Have a Dell Dimension E510 desktop with a 150gb hdd I partitioned when the computer was purchased in 2007. C:\ was sized to approx 30gb, and D:\ was sized to approx 120gb. Now, onto my current problem(s):
10 days ago, my desktop presented the following after a reboot:

"Windows could not start because the following file is missing or corrupt: WINDOWS\SYSTEM32\CONFIG\SYSTEM". This also coincided with a power supply failure shortly thereafter, which has been replaced.

After replacing the power supply, the above error would still display after reboot. I attempted/completed the following:

1. Tapped the F8 key to get to the ADVANCED BOOT MENU, and tried the LAST KNOWN GOOD CONFIGURATION option - to no avail. Still received the file missing or corrupt error.

2. Tried to get to SAFE MODE WITH COMMAND PROMPT from the ADVANCED BOOT MENU, but it would still result in the file missing or corrupt error.

3. Inserted the OEM OS disk and booted from there. The Windows XP Setup window appeared, with this:

"To Set up Windows XP now, press ENTER."
"To repair a Windows XP installation using Recovery Console, press R."
"To quit Setup without installing Windows XP, press F3."

I selected and pressed the <R> key to enter the Recovery Console. This got me to:
C:\WINDOWS\

I typed:
chkdsk /r
and hit <ENTER>

The result was several (4?) files were repaired, and I t... Read more

A:Ran CHKDSK /R for Missing or Corrupt Registry File, Now Have an HDD Issue

Ubuntu is a good approach. If that does not work, I would take the drive and put it into another computer that works (setup as a slave drive) and move data important from both partitions to a new backup medium. I hope this information helps.
 

1 more replies
Answer Match 62.16%

wnasp132.dll or wnaspi32.dll

when i put a dvd in my computer and try to play it my computers says the above file is missing. can anyone help here please. i'm running windows me and have nero express windows media player and mgi movie player as my cd software. thanks
 

A:computer missing file.

9 more replies
Answer Match 61.74%

Hey all,

Dropped my Asus eee netbook XP/Linux box the other day.
Added a new admin user to get it connected w/ vista laptop via crossover cable.
Had some problems after that & some hard reboots finally ending in the "File is missing or corrupt: C:\Windows\System32\Config\System" on boot .
Tried getting access thru Linux, boot no problem but could not get to that dir.
Removed Seagate drive from netbook & connected to vista box via usb.
Ran chkdsk /x from cmd & let run all night. FAIL with lack of disk space. Tried to find the failed chkdsk files w/o luck.
Read about chkdsk on this site & will NEVER use it again

Read about rebuilding hives on this site but there are only 2 files in the netbook drive's System Volume Information dir....

I can get my data off the drive

Is there any hope to revive the XP OS?

TIA
 

A:File is missing or corrupt: C:\Windows\System32\Config\System CHKDSK

6 more replies
Answer Match 61.74%

I powered up my windows 7 laptop 2 days ago and it cycled through chkdsk for a long while, before it took me to my normal desktop.  And there is now a dialog box stating a .dll file is missing, and other various changes.  I am still able to get on the internet, as I am using the laptop now to write to you.  I am running malwarebytes as we speak.  Please help.  and Thank you.

A:Computer goes through chkdsk everytime I start computer

Hello can you give this exact message?And there is now a dialog box stating a .dll file is missing,Plus more info on thisand other various changes.Please download MiniToolBox, save it to your desktop and run it.Checkmark the following checkboxes:Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory size.Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run.Note: When using "Reset FF Proxy Settings" option Firefox should be closed.

5 more replies
Answer Match 61.32%

Why doesn't MY COMPUTER file show up on my computer? I am using a Toshiba Satellite A213 with Windows Vista.

A:[SOLVED] My Computer file missing

Click Start Orb > Computer

If not there Right-click the Start Orb > choose properties > Start Menu tab select Customize > under computer select display as link

9 more replies
Answer Match 60.9%

When I try to start my computer it comes up with: Good configuration to revert to the most recent settings that worked. Then it has a list of start up options- safe mode etc then it says:
Windows could not start because the following file is missing or corrupt:\windows\system32\config\system
Do you know how I fix that?
Thankyou for your time.
I have windows XP.
 

A:Help File Missing or Corupt and My computer won't start!

Have you been able to try a system restore to a date before the problem started
 

2 more replies
Answer Match 60.9%

I'm having trouble with my very new computer, which I've narrowed down to the following sequence:
1. I restored computer to original factory settings (to rule out possible causes)
2. I ran msconfig, and checked the boxes 'Safe Mode' and 'Networking.' I got the following error message:
"System configuration cannot save the original boot configuration for later restoration. Boot changes will be reverted.

The system cannot find the file specified"
3. The default boot option disappeared from the boot menu (Windows 7, default OS, current OS).
4. When I restarted my computer, it would not boot and gave me the error 0xc00034, stating that the file \Boot\BCD was missing.

I did not do anything else with my computer after restoring the factory settings, and I did not connect to the internet. I originally encountered the problem when I wanted to try installing Windows updates in safe mode after some of the installations failed. I have replicated the error several times, including after successfully installing all Windows updates.

I got this computer less than two weeks ago. Is this problem particular to my computer, perhaps caused by a corrupted file? Should I try to return it and get a replacement?
 

A:Boot File Goes Missing (should I return new computer?)

Being that its a brand new computer in theory it shouldnt have any problems. i would certainly take it back and find out why theres problems and if it can be solved to your satisfaction. if not i would certainly get my money back as you certainly havent gotten what you paid for which would be a working computer at this point.
 

1 more replies
Answer Match 60.9%

Used 6 boot disks and then I reformated my computer, after it was 100%, it told me that the .SIF was missing or corrupted. I have Windows XP Professional for my three computers. I bought the original Windows XP Pro(not the SP1 or SP2 package one). Did I download the wrong Boot Disks?

Thanks,
Jay

A:[resolved] Reformat Computer = Missing .SIF File

Hello and welcome to TSF

Did you install the same Pro cd on all 3 computers?
Im affraid that is illegal. You can only use 1 key code per machine.

11 more replies
Answer Match 60.06%

I believe Windows XP is on system

I get this:
Windows can't start because the following file is missing or corrupt:
\windows\system32\config\system

You can attempt to repair this file by starting windows set up using the original cd-rom

Select R at the first screen t start repair.


This computer did not come with disks....

Please advise - this is a "work" computer" not personal. Thanks

A:[SOLVED] Missing/corrupt file - computer won't start up

Hi
First you are going to need the Windows XP CD. If you do not have one you can download the Windows XP recovery Console ISO from here.
Write it to CD using a program like ImgBurn.
Once written to CD, boot your PC with the CD.
On the first screen press "r" to enter the recovery console (3rd option).
When asked which Windows you want to log in to type in the number that corresponds to the correct installation (Usually "1")
Enter the Administrator password (if asked) else just press enter if you do not have one.
Then at the command prompt type

Code:
chkdsk c: /r
and enter.
Allow chkdsk to run.
Restart the PC once done.

For a more detailed document (with screen shots) on how to enter the recovery console see How to Enter Windows XP Recovery Console

19 more replies
Answer Match 60.06%

Troubleshoot: Part2, XP File & Printer Sharing, Computer missing? Chk Browser Service


TROUBLESHOOT: Part2, XP File and Printer Sharing
Computers Not Found? Diagnose Computer Browser Service​
File and Printer Sharing between Windows computers requires you properly select and configure a ?mix-and-match? set of Windows components and options. For brevity, this guide refers to File and Printer Sharing as F&PS

Network visibility and access errors are indicative of underlying problems in F&PS Visibility. You can?t find all Windows Network devices under My Network Places
Access. Access/privilege errors occur when you open a workstation or workgroup you should have access to​This guide helps find and fix most causes behind Visibility and Access errors. The settings suggested are fairly generic and support most users. Once errors are fixed, you can further modify these settings as meet your needs
The system details / instructions herein are specific to XP Pro and XP Home running SP2 or SP3. For other versions, you can still gain an understanding of ?things to look for? but can?t use these instructions to fix other versions​This guide is divided into 3 parts


Part 1, ?Troubleshoot: XP File and Printer Sharing, Computers not found? Check your basic configuration? focuses on common problems and F&PS configuration issues which cause visibility errors.
Part 2, (this document) focuses on Computer Browser Service and how it ma... Read more

A:Troubleshooting: XP File & Printer Sharing, Computer missing?

I've mentioned this prior, but you have a lot of info

Master browser can be done in the services.msc

Master Browsers
Computer Browser Started enabled set to auto
Network Connections Started enabled set to auto

None Master PCs
Computer Browser disabled no started
Network Connections enabled and started

Browstat - status command is what most user can use
 

1 more replies
Answer Match 60.06%

Some years ago, I downloaded a series of computer games for the blind from gamesfortheblind.com. These games worked with screen-reading software Jaws for Windows and Window Eyes. The games no longer work. When I click on the games file, I get the error message:-
"component tegowav3.ocx or one of its dependencies not correctly registered. A file is missing or invalid." The dialog box is titled 'hang'.
A version of Visual Basic was required for operation, but this is no longer there. I tried downloading Visual Basic files from Microsoft, but they do not solve the problem. My computer has XP Home, but had Windows 98 when I downloaded the program. These particular games are no longer available at the website. Any ideas as to how I can get these games working?
 

More replies
Answer Match 58.8%

Hello!
 
I think my husbands computer has a virus.   It is running windows 7.
 
It is so slow it is pretty much unusable.  He tried to update iTunes and received a message saying a file was missing (he didn't write down what it was).  It doesn't look like his windows updates are working.  He is now finding emails sent to all his outlook contacts going out that he didn't write with questionable links in them.
 
The virus protection he uses is ESet.  We tried to run malwarebytes but it is going so slow we stopped it.  It had been running for about 26 hours and didn't appear to be moving anymore at all.
 
Can the programs that someone will hopefully tell us to run to find the problem be run in safe mode?  Do you have to be connected to the internet to run them?  It seems to run a bit faster when not connected to the internet.
 
Hopefully someone can help us.
 
Thanks!
 
Lonni

A:Slow computer, missing file messages, windows update problems

Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result. Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop.* Double-click mbam-setup.exe and follow the prompts to install the program.* At the end, be sure a checkmark is placed next to Update Malwarebytes' Ant... Read more

4 more replies
Answer Match 55.86%

so.. I really feel the reason my registry got screwed up is because I tried out WindowBlinds. I felt like it slowed down my computer alot so I deleted it.

A couple days later I started getting messages that there was a chkdsk needed. I ran CCleaner and it didnt help at all. So i restarted the computer, it ran chkdsk for a couple hours...and when i logged back on i was still getting those messages.

I thought maybe my external harddrive was causing this so I unplugged it...but regardless all my programs started to crash too. Google chrome was complaining about a missing shockwave plug-in (which I know was 100% up to date) my windows explorer would crash, something popped up that said DrWatson Postmortem Debugger crashed (which I thought was CCleaner...but i dont really know)

I restarted my computer...it ran chkdsk again! When it was finished, my Compaq load screen would come on, then it would go to the screen where you chose safemode and what have you... so I selected safemode. It shows a scrolling list of random filenames, then restarts the computer and goes back to the safemode selections. No matter what mode I choose, it always does this (except "start normal" does the same thing minus the scrolling list of file names)

So when the compaq load screen pops up before the safemode-selection-screen thing I tried System Restore. Well, that was pretty unsuccessful too.. it loads the system restore then brings me to a blank teal blue screen with an abnormally large c... Read more

A:Cannot Log onto computer after CHKDSK

PS: My brother suggested unbutu...but like i said i dont have a floppy disk drive, and i dont have a cd burner on this laptop...can I use it through a flash drive?? and how would I do that?? ok i'll stop asking questions so you guys have a chance to answer
 

1 more replies
Answer Match 55.02%

Hello!! This seems to be the best place to find out some answers! A few weeks ago, I had a nasty virus on my computer. Luckily I had internet on my phone and was able to look up how to remove the virus and thought the problem was taken care of. Over the last week or so my computer has slowed to turtle speed, when I click on any program to open it, I can walk away and do something else for 10 mins or so as that is how long it takes to open. I have run MalwareBytes as well as my Antivirus program(norton security suite) and they have found nothing. Granted I have only been able to do a quick scan for av, I tried a full scan and it took 6 days to go through 170,000+ files and wasn't even close to done. So I'm not sure if the virus wasn't fully removed, as I thought, or if this is a ripple effect from having a virus.

And now, upon restarting my computer this morning, it told me that it found new hardware, unknown, that needed to be installed. One of my drivers just disappeared it seems. I'm not sure how, why or what caused this but is there a way to fix it?

OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 1500MHz, x86 Family 15 Model 0 Stepping 10
Processor Count: 1
RAM: 575 Mb
Graphics Card: NVIDIA GeForce FX 5200, 256 Mb
Hard Drives: C: Total - 38154 MB, Free - 16236 MB;
Motherboard: ASUSTeK Computer INC., P4B-LA
Antivirus: Norton Security Suite, Updated: Yes, On-Demand Scanner: Enabled

I have to g... Read more

A:Incredibly slow computer/missing drivier/Hot Mess of a computer!

16 more replies
Answer Match 55.02%

I have an Eee PC 904HA and when I was done using it, I shut it down normally. 30 minutes later I tried to turn it back on and it prompted me to do chkdsk, so I did because I have never had a problem with it before. It deleted a lot of files, but I thought that was normal. Then, when I try to restart now (in normal mode or in safe mode), I see the windows xp loading screen, then it is blank for a few seconds, then there is a quick blue screen that goes away too fast before I can see the error. I cannot find anywhere in the BIOS that says "automatically restart on error" or something. I do not have an external CD drive and there is no internal CD drive in this machine. I just started using this 2 days ago, and this is very frustrating.

I did not download any new drivers or anything either.

A:chkdsk screwed my computer up

Chkdsk does not delete files, it attempts to correct some file and disk situations that need attention.Chkdsk Explained, Understanding What Chkdsk Does - http://support.microsoft.com/kb/314835/EN-US/ Scroll down to Understanding What Chkdsk Does for a summary.Typically, when the system prompts to run chkdsk at boot...it's a sign that XP has detected a situation needing attention.I suggest removing the drive and attaching it to a working system with XP on it...and running chkdsk /r on the drive from there. This can be done from the cmd prompt window, as explained below.You can use a USB enclosure (with your drive inside the enclosure) to attach the drive. The enclosure must accomodate SATA drives, if that is the type of hard drive you have installed.How To Run CHKDSK In XP - http://support.microsoft.com/default.aspx?...b;en-us;Q315265 Louis

4 more replies
Answer Match 55.02%

last night i rebooted my pc, which i usually leave on continuously. When it came back on chkdsk came on and recomended that i run it (why? i don't know). Anyway it seemed to make A LOT of changes as far as deleting files, moving files, restoring files, etc. When Windows XP then booted up everything seemed ok. Unfortunately that was not the case. I can not load certain programs now (they hourglass comes on for a few seconds then disappears) When I go to my ISP homepage it says there is a problem between it and my security software which according to them is either Norton or ZoneAlarm. Well I don't even have either of those programs - I just Just AntiVir and Windows firewall. Plus i can surf the internet using IE. Anyway one of the programs I can not load is my Firefox browser. I figured maybe I would just download it again to fix the problem. Unfortunately the download icon on the firefox page doesn't even appear! Also certain links on other pages that show as Javascript do not work. Also an error keeps popping up at random saying that it "can not run the application in this environment" and mentioning something about a MS subsystem and a number 16. Other programs that dont work is my HP digital imaging software and windows help. Is there a way to fix this? is this a registry problem?
 

A:CHKDSK has ruined my computer

16 more replies
Answer Match 55.02%

I have been discussing this problem with Myrti in the malware forum and she has suggested that I try this forum instead as she is convinced that there is no malware. The problem is that I cannot defrag the disk. I set it to run as instructed but it never runs. Myrti says something is blocking it but not malware. This has been going on for some time in the following thread...

http://www.bleepingcomputer.com/forums/topic352677.html/page__pid__2037820__st__54

Any help would be great. Thanks.

A:cant run chkdsk - slow computer

Hi -Try this method for your disk check - Copy and paste the following code into your Run Box - CMD /C ECHO Y|CHKDSK C: /R | SHUTDOWN /R /T 30This will reboot your system in 30 seconds after you click OK - Make sure all programs are closed (including internet) and let the program run -It will take a minimum of 30 mins and up to 45 mins and run a full 5 stage check/repair on your system - Do you have at least 15% free space on your system so that you can defrag , if not it will not work - Please open Accessories > System Tools > Defrag and run the analyse section only (not the defrag) and see just how much free space you have and how Fragmented your system is -Thank You -

23 more replies
Answer Match 55.02%

Windows 7 Home Premium SP1

Trying to back up C:, D: & System drives using Windows Backup, Acronis, and Macrium all fail after about 65%. Acronis screenshot attached. The other programs don't even give that much info, or I couldn't find logs. How do I turn on deep logging for any of these programs? How can I find out what file occupies the sector identified in the Acronis error?

I ran CHKDSK C: /R /F on bootup and left for work. I come home and the computer's off. I ran it in the evening and it got into Stage 4 of 5 for a long time. It seemed to be stalled at 79% for a long time but then it finally went on to 80% so I figured it was just on some big file. I did something else for about 15 minutes and then looked back and my computer was off again! Backups continue to fail. What causes a CHKDSK to turn off the computer? I'm baffled! I hope I can solve this without staring at CHKDSK for 45 minutes only to find out the info I need just flashes by.

Thank you,
Bent Franklin

A:What causes a CHKDSK to turn off the computer?

I still don't know what caused the backups to fail, but I figured out what was happening with CHKDSK. Last night I ran it in a DOS window from the System repair disk. It got hung up on different steps but always seemed to keep going eventually. It was stuck at one point for a while and then the screen started flipping out and then it froze. It wouldn't reboot. So I thought I was hosed. But I took it apart and noticed it was really hot. I think it overheated, which would explain all the shutdowns. After a few hours I started it back up and I'm back in business. Now I have to figure out how to get a backup with a disk that has a major problem.

Of course that doesn't answer the question: Why would CHKDSK cause it to overheat just because it got stuck on one sector of the disk? Why didn't it just mark it as bad and move on?

1 more replies
Answer Match 54.6%

I'm running a 5 year old Dell XPS 7100 with windows 7 home premium.  Have a ATI Radeon HD 5040 SATA 1 TB hard drive that I know has some issues.  Windows is up to date with all systems updates downloaded as necessary.The system was working fine, but the hard drive seemed to spin forever.  Did a Dell Diagnostic scan on the hard drive and the error code 0F00:065D resulted. 
 
Decided to run chkdsk to see if i could find and fix the error which I think was a huge mistake.  After chkdsk ran for alomst a day and didn't finish, I hard restarted my computer thinking it was stuck.  I now know that doing that (after I subsequently read all the forum posts) was probably a bad thing to do.  When I restarted the computer it went right back to doing a chkdsk and it seems to have frozen again at stage 4 of 5 with no movement at all.
 
Stupidly, I have not backed up my files on the C drive and need to know what to do next to get back to my desktop and get my computer and files backed up before the drive fails completely, if it's already not too late.
 
Please help.

 

A:computer hangs on chkdsk-can't reboot

That code indicates a failing hard drive and yes, doing a chkdsk on it was not a good thing to do. Your best chance now of recovering anything is to remove the drive and put it in an USB enclosure. Attach it to another computer and try to recover your files.
 
Another way is to download a linux distro like Puppy linux and burn it to a CD or create a bootable USB flash drive with Rufus. Boot to the Puppy desktop. You will see hard drive icons in the lower left of the Puppy desktop. They will be labeled sda ...sdb depending on how many hard drives you have on the computer. They will be labeled sda1...sda2...sda3 depending on the number of partitions on the disk.
 
Click once on the hard drive icon. If you do not see your Windows files then close on the File Manager and click on another icon. For Windows 7 the windows partition will probably be labeled sda2. Click once on it and a File Manager Window will open. Attach another USB flash or external drive. A USB icon will appear on the desktop. Click once on it and another File Manager will open. You can highlight files/folders on the hard drive by holding Ctrl and left clicking or windowing around the folders/files. Drag the files from the hard drive File Manager to the USB flash or external hard drive File Manager. A small dialog window will open asking if you want to copy or move. Select copy and check the quiet button.
 
If you cannot copy or see any files then chkdsk may have damaged the file system enough wher... Read more

3 more replies
Answer Match 54.6%

I've had the same computer for about a year and never did I once run the Disk Check that Vista recommended at startup. Everything worked as smooth as silk. Untill one day I decided to let DiskCheck run while I showered.
Upon returning, I found myself at a blue screen. So I restarted my computer.
It gets to Vista Loading Screen.
It gets to the log in screen.
I can do one of two things... I can type my password and hit log in and let it crash while loading up Vista.
Or I can just wait and it will eventually just crash at the login screen.
This NEVER happened before I let DiskCheck run. Now I can't even access my computer.
IS THERE ANYWAY TO FIX THIS!?

If not...

I decided to format and just reinstall Vista. No, better yet, Windows XP!
I didn't delete any partitions yet just incase Vista would still work.
I booted on the XP install disk and it takes me through the license agreement and up to the part where I choose the partition that XP is to be installed. This shows up as...

Unknown Disk
Unknown Disk
Unknown Disk

If I hit up or down or enter I get a blue screen.
Is my computer irreversably destroyed?
 

A:CHKDSK / DiskCheck screwed my computer?

11 more replies
Answer Match 54.6%

When I boot up my computer, it acts normally until after the Windows XP Loading screen. After that, I get a screen with the following message:

Checking file system on C:
The type of the file system is NTFS.
The volume is dirty.

Then, CHKDSK performs some operations, and the screen reads:

Checking file system on C:
The type of the file system is NTFS.
The volume is dirty.

CHKDSK is verifying files (stage 1 of 3)...
File verification completed.
CHKDSK is verifying indexes (stage 2 of 3)...
Index verification completed.
CHKDSK is verifying security descriptors (stage 3 of 3)...
Security descriptor verification complete.

After that, I cannot do anything. Buttons on the keyboard do not work, and niether does the mouse. Every time I reboot, it's the same thing.

HELP ME!!!
 

A:Problem When Booting Computer (CHKDSK)

Try running the long HDD scan using the boot disk downloadable from here - http://support.packardbell.com/uk/item/index.php?i=6917051000
 

2 more replies
Answer Match 54.6%

Okay, so my computer was working fine a few minutes ago, then I turned it off and unplugged all of its peripherals because I had to move it. Then I set it back up and turned it on.
 
When I booted it up, CHKDSK started to run. I didn't think much of that and let it run. But when it was done, my computer kept rebooting on a loop. Whenever it got past the Windows splash page, it would just black screen and go back to the HP screen where it all began.
 
This rebooting was probably due to some kind of system failure. So I went into the Advanced Boot Options and tried booting while disabling the automatic restart during a system failure. And I got this blue screen saying that the computer had suffered a fatal system error.
 
CHKDSK couldn't have done anything to mess up the computer, could it have? Because it was working just fine before I turned it off.
 
 
EDIT: The exact text on the blue screen is...
 
STOP: c000021a {Fatal System Error}
 
The Windows Logon Process system process terminated unexpectedly with a status of
   0xc000012f (0x00000000 0x00000000)
The system has been shut down

A:I ran CHKDSK, now my computer keeps rebooting when I try to boot.

Payday loan? Unfortunately I don't live in Australia.
 
But how does that help fix this boot problem?
 
Mod Edit:  Spam post removed - Hamluis.

more replies
Answer Match 54.6%

Right so I ran CHKDSK because of a repair program that meant to help me suggested I did before running it. And now during the process my monitor is apparently not receiving a signal as nothing appears on it and it looks just like it does when my comp is shut down. My comp is still running though... I can still hear it and neat light that can change colors is still on though doesn't mean anything other it is on. I have no idea if my computer is doing anything or not.
I did try to turn my computer off and on again and CHKDSK still decided to run and when it said press any cost before X seconds to cancel it nothing happened when I did and it ran anyways. So I'm on my phone right now and have no idea what to do now. Been spending all day trying to get my comp to connect to the damn internet.
I don't have any CDs or nothing with booting stuff as my comp was custom built as a gaming computer for me about 6 years ago or so. If you all need information about it to help me then I will give it to you. Thanks in advance for the help.

More replies
Answer Match 54.6%

I have attempted to reboot my computer, and It appears something has happened in CHKDSK that has severely messed it up. During chkdsk, things were going well until suddenly my screen became completley flooded with
"Replacing invalid security id with default security id for file XXXXX"

I got up to a hundred thousand when I realized that something was going wrong. As I read up on the internet, I found out that this was an error, and apparently chkdsk has screwed me over. I have requested some sort of hotfix from microsoft, but I'm not sure if that will work at all and apprently it's coming "Within 8 business hours"

Here is the status of my computer:

I log on:
-There is no start bar.
-It takes a while to log on. Screen sits at welcome screen for about 10-20 seconds, then a picture of my desktop background pops up, and only after that has occured for a bit do the icons pop in
-Can not open any new windows in internet explorer. Can still minimize and shift through them with alt+tab
-No sound on desktop. Music does not play, and teamspeak says it does not recognize a sound driver
-Programs that were supposed to initialize on start up don't seem to be around. Steam and Xfire are both working however

This is all wierd...
BUT! The strangest thing happens. All my video games work.

I have just launched World of Warcraft and everything works fine. Video card is A-OK, everything is playing on high settings, even SOUND is working

I've got no cl... Read more

A:Chkdsk just screwed up my computer, no start bar, HELP!

I would wait on the hotfix and see what it does. If worst comes to worst, you can always do a repair install, that way you do not loose your games or other files.

15 more replies
Answer Match 54.6%

My computer was running very slow (lagging whatever it was doing) all of a sudden last night, and this wouldn't get fixed even after restarting it a few times. So I decided to run a chkdsk /r upon reboot (read online this might help) and I restarted the computer. It started the disk check and I left. When I got back, the computer was off, and now it won't start. Nothing at all starts when I push the on button. I changed the power cable, made sure the computer is getting power, and that's not it. Before I try and check the power supply or open the computer, is there anything that might explain a computer suddenly running very slow, the ''dying'' in the middle of a chkdsk /r? (To specify: It doesn't start at all. The blue ''on / thinking'' light will turn on for a brief moment once after the computer is unplugged and re-plugged, but no fan comes on and there is no noise at all from the computer.) I was thinking this might be a problem with the C drive or the motherboard?

Thanks in advance!
 

A:Solved: Computer won't power on (at all) after chkdsk /r

6 more replies
Answer Match 54.6%

Hello, I'd like to start by saying I ave searched everywhere for a solution to this problem and I've had no luck. I am also quite inexperienced with most of the tools you may ask me to use, such as hijackthis. I've only had a few viruses on this computer during its lifetime and I've always been able to clean them off with malwarebytes or other programs and I even borrow friends' computers and fix them whenever they need. Anyway, I'll get to my problem. My graphics driver sometimes shakes loose inside of my computer, that's no problem except sometimes I have to tighten it back in. Sometimes I will turn on my pc and the screen wont load, telling me it is loose, forcing me to turn off the computer by holding the power button. Well a few days ago I did this, and I pressed "start my computer normally" when the screen appeared, but for some reason, a CHKDSK ran. I didn't have time to stop it and I did not want to turn off my pc while it ran. However, it started saying all kinds of my files were corrupt and it was deleting them and replacing some with defaults. I was like "hmm, ok, it's never done this before, maybe this is a good thing." However, when my desktop came up, the problem it caused was very apparent. There is so much to explain, I will get as much on here as I can. Say I try to open any program, a window pops up that says "The application failed to initialize properly (0xc0000022) Click ok to termi... Read more

A:Has CHKDSK caused my computer to break?

Greetings,Making sure your graphics is securely seated should be the first thing. Power down your computer, unplug everything connected to it and make sure the card will not become loose anymore. If for some reason you can not keep the graphics card screwed in buy a new case.Next, Download Cleanup. An CCleaner. Install & run both programs. **Do not use registry cleaner.Next, open a command prompt by searching for cmd from the start menu. Right click and select Run as Administrator. Type the following..chkdsk /r c:Press Y to accept the disk check on next reboot.** Allow the disk check to complete. It may take up to an hour.Let me know how it goes.

12 more replies
Answer Match 54.18%

So, I was playing a game called Battlefield 2, and it was a little laggy, it was pissing me off so I restarted my computer. I don't know if this screwed something up, but instead of re-booting up, my computer told me that a file in the system 32 folder or around there (It's called system, I think) was corrupted or missing.
Whoop dee doo. I've had like this happen way too much, and I'm incredibly tired of re-formating. I do NOT want to re-format and re-install it, PLEASE, GOD, NO!

So, it told me to put in my windows CD and push "R" to repair it. So, I did, but that gives me a nice command line, and I don't exactly know what to do.

I tried restarted, and now without any error it just brings me to the blue windows XP screen before the computer goes to your desktop, but it just stays there without actually..going to my desktop and letting everything function. So, what do I do now? Is there any way to replace this file, or am I gonna have to re-format?

A:Computer does not boot up, A file in my windows folder is "Missing/corrupted"

hey there killaer

they only thing thing that comes to mind is (F8 ) and useing the (The Last Good Configuaration ) option

when you use thr repair dose it not tell you wich drive your software is on / profile ??

it should give you the option as in ( 1 c;/win) or something to that affect , maybe you need to slow down and read what the options are

i know this can be very frustrating but sometimes good things come to those that stop and smell the pc chips and stand back, look, read ,and reread

i have learned this lesson many times !!!!!

hope things work out

Mike

7 more replies
Answer Match 53.76%

it reads: the file or directory C: is corrupt and unreadable. please run chkdsk: I've ran Chkdsk on C: and /F and C:/r none has fixed the problem and allowed me to go back online I've tried pulling up Explorer, Google Chrome, and Firefox none is working I am using my other computer so the internet is fine

please help and thank you,
 

A:Computer error with Chkdsk, internet not working

Welcome to the forums. FYI this is the Introduction Forum. What you are looking for is the General Hardware form.

That being said find the manufacturer of your harddrive, access their website and find their free harddrive diagnostic utility. Run all the tests.
 

1 more replies
Answer Match 53.76%

Bear with me, I'm somewhat experienced with computers, but not a ton. I recently rebuilt my computer, due to freezing issues with my last computer, poor & old parts, etc. and even with everything being replaced with the exception of peripherals, I continued to have freezing issues. Wondering if it might have to do with an extremely old keyboard, (PS2), I replaced that, but there continued to be freezing issues, so I attempted to also use a new mouse. During this, I figured it couldn't hurt to check my hard drive as many people recommended, so I ran chkdsk. The first time I ran this, when I checked on it in the morning, it was frozen on a black backlit screen. I hard shut down the computer, and upon restart, it began running chkdsk again. This time, after maybe an hour or two, Windows crashed with the "unexpected error encountered" message and froze on 0% of checking for the error.

When I tried to skip chkdsk, the Automatic Repair came up and would get past the "Diagnosing PC" pinwheel and say that Windows could not be repaired and would I like to system restore? I attempted to system restore, but it then froze on the Windows 8 logo without the pinwheel or anything else occurring.

Currently attempting to run chkdsk a third time, hoping to get past any Windows crashes, but I'm not very hopeful.

Does anyone have any suggestions? The computer is completely new, the only software installed is CCleaner, Spybot, various Steam & Blizzard gam... Read more

More replies
Answer Match 53.76%

Hi,

I was asked to schedule chkdsk to run on boot up, which i have done. It gets to the point where it say it is finished, but then the computer freezes. I have tried rebooting, but it goes through chkdsk again and the same thing happens.

There is no light on the hard drive, so basically the computer is just sitting doping nothing.

I have tried leaving it overnight to see if it is just slow, but this did not work.

The option to skip at the beginning comes up but the keyboard is locked out.

I tried looking at the registry entry for stopping chkdsk from running as has been shown in this forum, but when i went in the file BootExecute was not there. I put it in as a new entry in the correct folder, but this did not work.

Can someone please help me.

A:[SOLVED] CHKDSK finished but then computer freezees

Hi -

Run HDD diags -
- http://www.carrona.org/hddiag.html
- http://www.techsupportforum.com/2828431-post7.html
- Drive diagnostic utilities compendium - TechSpot OpenBoards

Start w/ SeaTools for DOS - link #2.

Regards. . .

jcgriff2


`

4 more replies
Answer Match 53.76%

Specs: 
 
Gigabyte LGA 775 board - I forget the model
Q9300
4GB DDR2
Sapphire Radeon HD 5770
Seagate 2TB HDD
Cooler Master Cosmos I
 
I suspected some hard drive issues on my friend's computer and ran chkdsk. There was a power failure while the utility seemed stuck at 27% for all eternity, and now the computer won't produce any image on the monitor (which I have tested on other devices) or sound on the speakers (also tested) when it boots. I have since tested the old hard drive (it does have problems) and put in a new one, but the same issue remains. I also tried different SATA cables and SATA ports.
 
I have a slight suspicion it could be the video card, but I don't have a spare on hand. Does the computer still think it's running chkdsk? Any other things I can do on my end?
 
Thanks

A:Power outage during chkdsk; now computer seems dead

Does the computer still think it's running chkdsk?
No. 
Any other things I can do on my end?
Remove all expansion cards. Disconnect all drives. Basically only have the minimum things connected that are needed for the motherboard to POST: usually motherboard, RAM, and CPU. If the computer won't POST at all when the minimum hardware is connected then try connecting a different power supply. Alternatively, the computer might start POSTing again. If the motherboard doesn't have integrated graphics and it does have a little speaker plugged in to it someplace on the board (usually near the headers for the front panel) then you should hear some POST error beeps that indicate no graphics system was found. If you hear the error beeps then at least you know the motherboard performed a POST which would be better than what you're seeing now. After POST starts working, shutdown the computer, and start reconnecting drives and cards. Try one or two things at first, power on the computer and watch if it POSTS ok again. If the POST doesn't happen then you'll know one of the things you reconnected may be the problem. Notice I stated may be the problem. The piece of hardware might actually be ok but the power supply isn't functioning like it did before the power outage and might have trouble only after adding a certain part. If you figure out what card or drive is causing the computer to not POST I recommend trying the card/drive in a different computer to see if it still c... Read more

4 more replies
Answer Match 53.76%

Guys, I am having an issue with chkdsk running everytime I restart my computer. I ran full diagnostics and everything was okay.

I press f8 at startup and try to do system repair but it just boots normally and takes me to the same screen that says it will do chkdsk and starts counting down to 1 second and sometimes freezes there. What can I do to resolve this issue?

I am running win 7 on a laptop

A:chkdsk running everytime I restart my computer

Hello Lakers, and welcome to Seven Forums.

You might see if resetting chkdsk may be able to help with this for you.

Hope this helps,
Shawn

5 more replies
Answer Match 53.76%

Hi all. I posted this under the Windows XP/NT help forum, thinking it was an Operating System problem. But I think its definetly a hardware problem now. I could use some advice. I'm really desperate to get a stable system!
--------------------------------------------------------------

The story:

1) Built a new computer in Oct/Nov 2006. Had been "out of the loop" in terms of computer know how, as the computer I was using at the time was going on about 6 or 7 years old. Originally I had a problem and couldn't get the computer to POST or start up, but it was because I purchased Brand X memory that wasn't "compatible" or recommended with the MOBO (never heard of a situation like this before. Always though Ram was Ram was Ram... learned my lesson.)

2) Computer runs like a dream for about 7 months. It is now around late May/June 2007. I turn the computer on and sit down on the chair and start to get comfortable. To my horror the computer enters this strange "safe mode" blue colored screen and is running some sort of check. It goes by real quick and I don't have time to read it. The computer goes past it and does not load and begins a reboot cycle.

3) Fastfoward a month and three or four full formats of the Hdd and reloads of WinXP. After each load the computer would work for a random amount of time then the same problem would occur. Repairing WinXP did nothing. Eventually I went to format the Hdd again and I started getting me... Read more

A:CHKDSK problem and general computer trouble. please help!

16 more replies
Answer Match 53.76%

Hi I'm Turning on my computer boots up normally when windows about to load CHKDSK scans my D: Drive every time this never happened before but is there a setting that I have to adjust? Motherboard: P6T Deluxe V2CPU: i7 Core 950 3.07GHzGPU: NVIDIA GeForce GTX 295Memory: Corsair 6144MB RAM Hard Disk 1 {C Drive}# 300 Gig Raptor Drive Hard Disk 2 {D Drive}# 1000 Gig OS: Windows 7 Ultimate 64-bitMonitor: Duel Samsung Screen

A:CHKDSK Starts every time I boot up computer

You must have admin level access to follow this process.- Press Windows Logo Key + R to open the Run dialog.- In the Run dialog, type cmd and press Enter. This would open the command prompt window.- In the command prompt window, type chkntfs /D and press Enter- RebootIf you do not see Adminstrator : in the command prompt window title, then you are not running it with admin level access. In that case, click on Start Menu, type cmd in the search box, right click on cmd.exe when it appears in the searched items list and select Run as administrator.

4 more replies
Answer Match 53.76%

Hello! I'm a computer-illiterate student who needs help fixing a PC before the next school week starts.

My computer (Dell, Windows XP) was fine this morning. Then after a reboot, I noticed it was giving me an error message in the bottom right corner of the screen that told me that one of my folders was corrupted (my adobe acrobat reader was corrupted; I tried re-installing it and it still wouldn't run) and that I would need to run chkdsk to fix it.

So I went to schedule chkdsk to run after my next reboot.

After my reboot, chkdsk started to run as usual. After the 1~2 hours it usually takes to finish running, chkdsk said it was done with its scan and would now start Windows. ... but it never started Windows, even after I waited an extra hour.

So chkdsk is stuck in a loop. It won't complete and open Windows when it finishes its check. After rebooting again, it gave me options: run it in the last way that worked or run it in safe mode.

I tried running it with the "last settings that worked" and it just gave me a black screen -- didnt load.

I tried running safe mode and the screen just fills with text as if it's trying to load, but freezes after hitting a certain point.

What can I do? I have some really important files on my hard drive so I hope I can recover from here.

Thanks..!

A:computer won't boot windows / stuck in chkdsk

Lets find out what is going on with your hard drive.

first, use Recovery Console to run Chkdsk again:
http://support.microsoft.com/default...NoWebContent=1

Set your BIOS and its Boot Order so that booting to CD-Rom is first.
Boot from the XP CD and follow the instructions here: http://www.windowsnetworking.com/art.../wxprcons.html

In Recovery Console:

chkdsk c: /r
fixboot c:
exit

Now set your BIOS Boot Order back to its original state and try and start XP.

Report back, because I think some of the files needed for XP to boot are corrupted.

.

19 more replies
Answer Match 53.76%

It only does it some of the time, and it will boot up and show a Chkdsk, press any key to abort. blah blah blah. But when it does the check, it finishes in less than a minute and always finds no problems. I checked a previous thread and it said t edit the registry and modify an entry. I went to that subkey and it does not show that it is running the check. However since I have booted it up this morning it has not run it either. Seems only to happen every so often. Just kinda bugs me.
Any help would be greatly appreciated.
 

A:Computer running chkdsk on secondary drive

Don't have a clue, but I think it is important to figger it out. Have you tried another drive in that slot to see if there is a smoother startup?
 

8 more replies
Answer Match 53.76%

CHKDSK keeps restarting after Windows XP tries to load up. CHKDSK runs through the 3 steps and says everything checks out okay but after windows tries to start up it goes right back into CHKDSK again. It will keep on doing this continuously until you power down the computer. I have ran the Windows Recovery from my startup disc that came with the computer with the chkdsk /r. I have also downloaded a Windows Recovery disc from the internet. But when it tries to load up I get 0X0000007E error message. Tried to start in Safe Mode but it will not go to Safe Mode.

A:CHKDSK keeps restarting and computer wiil not boot up

How to Create a Bootable XP Recovery Console CD - http://www.bleepingcomputer.com/forums/t/276527/how-to-create-a-bootable-xp-recovery-console-cd/ Try following the above...and then running the chkdsk /r command from the Recovery Console.How to use CHKDSK in the XP Recovery Console - http://pirules3.14.googlepages.com/recovery_console_chkdsk System manufacturer and model?Louis

2 more replies
Answer Match 53.34%

I have a Seagate FreeAgent USB external drive hooked up to my PC, I solely use it to back up my files. Everytime I go to back these files up I have to power cycle the drive for it to work, otherwise the drive isn't recognized by the PC.

I keep it plugged in all the time (both USB and power cord). Any thoughts? Is this drive just going bad?
 

More replies
Answer Match 53.34%

I went to run a ChkDsk on my computer because I haven't in a long time, so I scheduled it for the C: drive and restarted.  That is when the troubles started.  The computer was extremely slow and never booted to check disk.  The computer will boot but now takes about 5 minutes, and once I am in windows everything is extremely laggy and slow.
 
So far I have restarted and re seated the RAM, popped out CMOS battery to reset MOBO, and currently running a Windows Memory Diag.
 
Bios is reading 16GB of RAM and normal temperatures.
 
Never had any issues with it until today
 
Rough specs of the computer (i built it a few years back and don't remember everything:
Windows 7 Ult
i7 3770k with H80 cooler
16GB RAM
90GB SSD (C: Drive)
1TB HD (D: Drive)
90GB SSD( for my games)
GeForce 770
 

A:Scheduled ChkDsk restarted Now Computer Extremely Slow

Please download and install Speccy to provide us with information about your computer.  When  FileHippo opens, click on Download latest version in the upper right pane.
 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.
 
 
 
Do the following to produce the chkdsk log and post it in you topic.
 
Type cmd in the Search programs and file box, the press Enter.
 
In the Command Prompt type the following.
 

ListChkdskResult.
 
This will open Notepad with the results of the chkdsk scan.  Please copy and then paste this log in your topic.
 

1 more replies
Answer Match 53.34%

Hi. My computer was perfectly fine until this Wednesday morning when I turned on the computer chkdsk utility started. I thought it was the random check but when i turned on the computer again the next day (Thursday), chkdsk ran again and this morning (Friday) also. This is the first time that happened to my computer. I was trying to update Ad-aware but it is saying ERROR. I used ccleaner and when the cleaner was done a balloon popped up and it says "The file or directory C: is corrupt and unreadable. Please run the Chkdsk utility.

ccleaner.exe - Corrupt File"

Is there a problem in my computer? I'm just worried with the virus that's out right now. Hope to hear from anyone. Any help would be greatly appreciated.

A:chkdsk utility running every time computer is turned on

http://www.techsupportforum.com/f16/...up-322154.html

10 more replies
Answer Match 53.34%

Not sure whats going on here with mycomputer but hopefully someone can help. heres my situation
 
Im running windows 7 with a Nvidia card about 16 g memory, 1 tb ssd which windows resides in (Samsung 840) , and another HD that is barley used but connected and is about 500gb.
 
The freezing is pretty random to me. It never happens unless I initiate something. By that I mean anything from clicking the search tab to opening or closing an application and anything in between. It can happen when other things are running or right after booting up and no extras running. From safe mode also but much less. 
 
My specs should be able to run anything I throw at it so im pretty sure its some type of malware. 
I've ran both Malware bytes anti-malware & Microsoft security essentials with no threats detected. I run MBytes once a week and it is always actively protecting along with MBytes-Anti Exploit, also both are premium versions and up to date. 
I've made a repair disk and booted to memory analyze and got no errors. 
 
and lastly I've tried to use chkdsk from cmd but got the RAW error (chkdsk unavailable for RAW drives). I've searched on what the cause of this could be but I couldn't find anything where the disk in question was the actual disk that Windows resides in.
 
If I got this error on the windows disk, shouldn't I not be able to boot up.? It makes me think some type of malware is trying to stop me from fixing the errors. M... Read more

A:Computer Randomly Freezes/Chkdsk not available for RAW drive error

Welcome aboard  Download GSmartControl for Windows and save it to your desktopUnzip the folder to your desktopDouble click gsmartcontrol.exeAllow the program to search for and list your hard drive(s)Double click your driveGo to the PERFORM TESTS tabMake sure that the TEST TYPE is set to SHORT SELF-TESTClick the EXECUTE buttonAfter the test completes, click the VIEW OUTPUT button and copy and paste the contents in your reply 

7 more replies
Answer Match 53.34%

Basically, I had to shut down my computer yesterday improperly (hitting the power switch on and off) and when I came back to open it later that day, it wouldnt load up properly and instead gave me a message that said:
 
"Checking file system on C: The type of file system is NTFS. One of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue."
 
(I later find out that this process is called "CHKDSK" if that helps you guys figure out my problem)
 
So I let my computer do this disk check but 1 hour later nothing is happening and I had to improperly power it off again since it was stuck at this screen. I then open it up again and the same stuff happens so I let it run for 8 hours and it was still was doing its "disk check".
 
Eventually after powering on and off a couple times, I hit F8 to try to finally properly run my computer as im booting up and I let it run a diagnosis that says it will fix problems with my computer. This takes half an hour but finally my computer starts up normally so I think my problem is solved. Unfortunately, my computer is running extremely slow. I can't open up the internet. It even took me 5 minutes to open up the folder from which my university documents are located. So at this point I start searching to find my problem. 
 
Here are the two potential solutions I found:
 
1. I have to figure out a way to switch from PIO mode to DMA mode (I tried... Read more

A:Computer Running extremely slow (CHKDSK problem?)

Once you can get into windows perform the following:Please perform the following, so that we can get the exact specs of your computer. This will better assist us in helping you more.Publish a Snapshot using SpeccyThe below is for those who cannot get onlinePlease take caution when attaching a text file to your post if you cannot copy/paste the link to your post, you will need to edit it to make sure that your Windows Key is not present.Please download MiniToolBox, and save it to your desktop and run it, and checkmark the following checkboxes:Flush DNSReport IE Proxy SettingsReset IE Proxy SettingsReport FF Proxy SettingsReset FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory size.Click Go and post the result (Result.txt). A copy of Result.txt will be saved in the same directory the tool is run.Note: When using "Reset FF Proxy Settings" option Firefox should be closed.

13 more replies
Answer Match 53.34%

Hi guys,So my computer is clunking along all of a sudden despite me doing everything recommended in the pinned post on the subject. I have around 40GB left of a 200GB HDD. I'm running the latest XP. Here is the Hijackthis log:Logfile of Trend Micro HijackThis v2.0.2Scan saved at 08:13:15, on 03/10/2009Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v8.00 (8.00.6001.18702)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Lavasoft\Ad-Aware\AAWService.exeC:\WINDOWS\system32\spoolsv.exec:\program files\common files\logitech\lvmvfm\LVPrcSrv.exeC:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exeC:\PROGRA~1\AVG\AVG8\avgwdsvc.exeC:\Program Files\Bonjour\mDNSResponder.exeC:\WINDOWS\system32\CTsvcCDA.EXEC:\Program Files\FRITZ!DSL\IGDCTRL.EXEC:\Program Files\Nero\Nero 7\InCD\InCDsrv.exeC:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\mdm.exeC:\WINDOWS\system32\HPZipm12.exeC:\Program ... Read more

A:Slow Computer (after spyware removal, chkdsk, defrag etc)

No suggestions?

3 more replies
Answer Match 53.34%

Hello, for the past 2 days my computer would run CHKDSK at startup. At first I let it run not knowing what it is (I'm not adept in computers). Apparently it deleted something on the first day. The second day, CHKDSK started up again and it, I believe, deleted some more stuffs.

Now during this second day, my computer started to lag and freezes up despite whatever I was doing: browsing, gaming, even while I was backing up some files. It was to a point where I would need to shutdown my computer or restart it by using the buttons on the machine instead of going to the start menu. I also had a blue screen once saying "KERNAL_DATA_INPAGE_ERROR_".

I've tried looking up for solutions. I first assumed I had some virus so I used Microsoft Essentials, AVG, S&D and Ad-Aware. I used AVG in safe mode too. None of them detected anything. I also tried sfc (I attached the log with this post, don't know how to do it in txt sorry). After CHKDSK ran, I tried "fsutil dirty query c" and it says it was not dirty. However my computer lagged and eventually forces me to shut it down.

At the end I stumbled on Startup Repair and just ran that. After over an hour it seems that did the trick and right now my computer seems to run fine, no lag, no freezes, games work too however CHKDSK still runs at startup (which I cancelled because I was afraid it would delete something again and make my comp unusable again). This time I tried "fsutil dirty query c" again and ... Read more

A:Trouble with CHKDSK. After running and perhaps deleting, computer lags

Try running the disk manufacturer diagnostics tool, i think the disk is on its way out.

2 more replies
Answer Match 53.34%

Yesterday I had a the unfamous 0X745f2780 error and I was able to fix that.Then I scanned my computer with Spybot, Ad-Aware, McAffee and vaccinated with SpywareBlaster. I also intsalled Mozilla Firefox the day before though it didnt seem to cause any problem. Then I decided to defragment and do a chkdsk and fix the errors. The first chskdsk corrected a lot of errors on the C drive then it rebooted and started again so I decided to skip it. Then my computer froze so I resetted it and then let the chkdsk run again 2 times then it rebooted. Since then my computer takes absolutely forever to load but once it's loaded, it seems to work fine except that oddly enough, the windows XP themes have disappeared so I'm stuck with the classic ones and msn seems to be a bit wonky but it make or not be related. The system recovery wasn't activated so I guess I can't use that. The only thing I have is a SpywareBlaster snapshot which I suppose is totally useless in that case.

Any ideas what I could do to fix that?

A:Computer takes a long time to load after chkdsk

Okay, one possible theory is that chkdsk found some bad sectors and you lost some System data. The missing Themes might be corrected by Start>Administrative Tools>Component Services>Services>Themes>Properties and making sure that it is set for "Auto" and the service is Started.

Please report the result of this.

Chkdsk does not "create" problems however it does sometimes cause them to be made "more aggravated". Simply put, you might have to do a Repair Install to fix the problem, unfortunately. Maybe running "sfc /scannow" might do the trick, but lately I'm kind of weak on this option/method and would rather do the more-reliable (but it takes longer) option of the Repair Install.

You should keep running chkdsk, as sometimes HD's that have serious errors continue to degenerate into complete loss of functionality, and by monitoring the HD you can possibly get ahead of the situation and start backing up data inorder to prepare for the permanent loss of the HD. Also, it is a waste of time to attempt to fix a O/S Installation on a HD that is getting ready to die permanently.

Good Luck

4 more replies
Answer Match 52.92%

Solution update: Sadly, we were not able to find an actual solution to the problem I faced. It took a little while, and there were some complications involved, but eventually the only thing to do was to refresh/reset Windows. If you have a similar issue I'd recommend reading this thread and making sure none of the proposed solutions work for you, and also potentially starting your own ticket first. That being said, resetting Windows has solved the problem I faced, so that might be the solution for you too.
Hello everyone,

I'm posting here because my brother's computer has been having some problems for the past week or so, and I've exhausted all of my knowledge trying to help him. It is a custom built gaming rig that I built, similar to my own rig. At the moment he is running Windows 8.1, with an NVidia GTX970 (MSI Build). If you want the specifics of all of his parts, go to this link: (Intel Core i5-4690K, MSI GeForce GTX 970, Corsair 500R Black - System Build - PCPartPicker). It is the partlist I used to build his computer, and all of his parts are the ones listed there. In terms of software on his computer, since it is a custom built gaming rig there is not much bloatware or other unnecessary software. Steam of course is installed, as are a couple games on Steam. He also uses EVGA Precision X16 to manage fan speed, and Open Hardware Monitor to check computer part health and temps. Windows Defender coupled with Malwarebytes (free) is the chosen antivirus, and scans from b... Read more

A:100% Disk Usage, computer nigh unsuable, BSOD for CHKDSK

Thanks for the detailed description of the problem.
While I read the description I found 2 things, outside of them, the zip file is empty.

Because the EVGA update couldn't be installed properly I think that it could be a huge cause of the problem.
Flash player isn't hardly needed lately, I would uninstall it, same with java.
If you can get into the advanced recovery, try to get the command prompt and type CHKDSK /r, hopefully without a bluescreen. If you have already done this try it again.

42 more replies
Answer Match 52.92%

My laptop has been running extremely slowly lately. It takes longer than usual to load regular programs and any web browser activity takes ages. I have run malware (Malwarebytes) and virus scans (Microsoft Security Essentials) and removed some items. Malwarebytes didn't detect much, but I found a trojan with Security Essentials. However, after removal my problems persist. I have scanned and attempted recovery of bad sectors. Issues were found and fixed, but a disk check was said to be necessary. I tried running chkdsk c: /F, but the disk check cancelled within a fraction of a second on startup.

Any ideas on what I need to do? I am running Windows 7 Home Premium 64bit on a Lenovo Ideapad Y550.

A:Computer Running Slowly, CHKDSK automatically cancels on startup

Welcome to Windows Seven Forums.

It would appear that this is a known problem after SP1 has been installed and Microsoft have released a Hot Fix to cure the problem.

Microsoft Support

6 more replies
Answer Match 52.92%

Hello,

I currently have the problem on my system (Windows 7 x64) "The Chkdsk.exe program does not start correctly on a Windows 7-based computer", I try to download the hotfix you show but unable to download it.

I also try your fix and in the registry I already had what you say I should have.

Any idea of what could be happening?

Thanks in advance.

A:Chkdsk.exe program does not start correctly Windows 7-based computer

Andrew,
I notice that you are running the release candidate version (RC) and not the Release to Manufacturing (RTM) version.

I thought that version had expired. In any case, you need to buy the RTM version.

All efforts will be futile on a RC version.

1 more replies
Answer Match 52.5%

screen. How do I stop that?

Any help would be simply awesome!

Thanks!
 

A:Everytime I download an image or file on my computer it shows up on my computer

Hi and welcome,
I think your downloads are saving to desktop (the screen). What web browser are you using (Internet Explorer or Firefox or ...).
With that info it should be possible to help you change the default download location.

Thanks.
Richard.
 

2 more replies
Answer Match 52.08%

Hello everybody,

At the beginning of the month, my computer began experiencing what I assumed were random lock ups. I could have the computer on for about 20 minutes or so at a time before the lock ups occurred. The odd thing about these crashes was that they took place one program at a time. First my browser would lock up, but I could still use my taskbar until I tried to use the start menu or open the clock, etc. Then my desktop would lock up if I tried to use any shortcuts. I eventually got frustrated with trying to troubleshoot it and completely reformatted, installing XP from scratch. Everything was perfectly fine up until I installed Diskeeper 2007 and tried to run a defrag on my computer. The lock ups occurred once more. Because Diskeeper also uses its auto-defragger tool, I realized that it was the cause of my lock ups prior to reformatting my drive as well. I tried defragging in safe mode, using a different defragging software, and ran chkdsk. In all cases, my computer froze, with chkdsk consistently locking up on phase 4 at 40%.

I suspect that my hard drives (I have two 150GB WD Raptors in a RAID 0 array) maybe failing, or at least one of them, but it's hard to tell; outside this defragging/chkdsk issue, my computer runs flawlessly, though I have noticed the slightest bit of lag when accessing files and programs lately (which could be attributed to the lack of a defrag). If one of my hard disks was failing, I would expect a much more cumbersome degree of erro... Read more

A:Computer locks up on defrag and chkdsk; suspected hard drive failure

7 more replies
Answer Match 52.08%

I'm thinking this should be easy, but it isn't turning out that way.

Computer A is dying, has a current File History. I am setting up Computer B and I want to use File History on B to restore from A. Instead, B can't see A's File History and just insists on creating its own. I don't want it to corrupt the backup on A's history

So the File History of A is on an external drive. I connect the external drive to B and go to File History. B just wants to write a File History of B and can't see the ones created by A.

Help, please!

Or am I just better off copying everything to an external drive and then copying it back to the new laptop?

A:Restoring from File History created on old computer to a new computer

Originally Posted by Smiley1


Or am I just better off copying everything to an external drive and then copying it back to the new laptop?



Yes. What you are trying is impossible, file history is individual on each machine even if you had same folder structure and user account. It can't be copied to another machine.

more replies
Answer Match 52.08%

yes or no ?? the XP Pro computer is missing this file...Can the XP Home browseui.dll file replace the XP Pro browseui.dll file ?/ any help is appreciated
 

A:Can I copy the browseui.dll file from XP Home computer to XP Pro computer ?

They should be exactly the same. After copying it to the system32 directory, register it.

Start > Run:

regsvr32 browseui.dll
 

2 more replies
Answer Match 52.08%

Hi All,

I need your help to resolve my issue.
I m having 2 laptops at home, I want to create system image file of laptop1 onto laptop2.
Since the data is large i cant take the hassle of creating sytem image on a DVD as it will require more DVD's to do it. So m planning to store it on Laptop2. I m thinking of connecting 2 Laptops with a LAN cable and then create the sytem image on other laptop.

Is it possible to do it the way i m thinking? or is der any other way to do this??
Your help is appreciated.

Thanks,
Saleem

A:How to store a computer system image file on another computer

Very easy; I do it myself.

If you don't have a router, use a crossover network cable between the two laptops. If you do have a router, use a wired connection from each to the router. Either way, make sure you share a folder on the destination laptop for the source laptop to stash the image.

I use the free version of Macrium Reflect for my images. You can either connect the laptops and run the image directly, or do what I do and store the image on the source laptop and then manually copy it over to the other laptop.

4 more replies
Answer Match 51.66%

I have been using 2 monitors for a year or so. One day my second monitor stopped working. When the computer starts or I cycle power to the monitor the screen displays briefly (1-2 seconds) and then goes blank. It shows the desktop correctly (or whatever would be there) but won't stay that way. Each monitor works correctly on it's own and in either port and with either DVI cable.

NVIDIA GeForce GTS 240
Monitor1: Samsung Syncmaster 245BW
Monitor2: LG Flatron W2361V

What I have tried:
1. I have switched out all cables.
2. Tried monitor on another computer (works)
3. Unplugged everything and let it sit 20 minutes or so and then plugged it all back in
4. Updated video drivers, including a fresh install of Nvidia control software
5. Adjusted to all available refresh rates and resolutions on both monitors

A:Second monitor briefly displays then goes blank after power is cycled

What's the common factor; the DVI port in use, or one particular monitor?

1 more replies
Answer Match 51.66%

My computer is acting very strangly lately: - Symantec Antivirus auto-protect turns itself off automatically once a day- The title bar of my different programs (IE8, Explorer, Outlook, Excel) disappears sometime- Start bar is really slow, and sometimes is missing areas- Outlook is working very slowely- Outlook sometimes tells me that my Archieve.pst is in use by another program (even though it is not)- Selecting START - Shut Down does nothing (I have to do a hard shut down with the power button)- Sometimes openning certain programs gives me a MISSING DLL error. But this is not always the case- Seems that the memory for clipboard is really small. Unlike in the past, it does not let me copy images that are of a reasonable sizeI am assuming I have some bad issues. This seems to happen when I am running Outlook and then afterwards, however, it also occurs other times as well. I have huge Outlook files (1 gb max) but that shouldnt cause the other missing DLL and not letting it shut down, I would assume.Any and all help would be greatly appreciated. ----------------DDS.txt ----------------DDS (Ver_09-12-01.01) - NTFSx86 Run by EMintz at 13:32:59.60 on Tue 02/02/2010Internet Explorer: 8.0.6001.18702Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.2047.1039 [GMT -8:00]AV: Symantec AntiVirus Corporate Edition *On-access scanning enabled* (Updated) {FB06448E-52B8-493A-90F3-E43226D3305C}============== Running Processes ===============C:\WINDOWS\System32\svc... Read more

A:strange acting computer: missing toolbar, shutdown not working, dll missing, etc

This has been fixed. Thanks

2 more replies
Answer Match 51.24%

I dont know how it happened but one day my cd drive was not working. the tray will open fine and it even lights up however it will not read anything. When i go to my computer the drive that usually says (:e) or whatever for it, is missing. Ive been looking online on how to fix this and nothing worked, then i read to delete the upper and lower filters but my lower and upper filters are missing. How can i get them back? I read that deleting them solved the problem for some people

A:cd drive missing from MY COMPUTER. Lower upper filters missing??

It could be a hardware problem ie. seized motor in your drive.

Quick way to test this. Insert a a disc in the tray, make a note of any writing or picture you can see on the disc, push the tray in. Wait for a minute or so, then eject the disc. If the picture/writing is in the same position as when you first put it in, then your drive motor is most likely knackered.

If this is the case, only real fix is a new drive.

2 more replies
Answer Match 50.82%

my sister used to have a dell 4300 dimension and decided to get a new computer, a dell 8300 dimension. she thought she could get me to just pop in the old hard drive (which isn't so old. proabably a few months old) but "suprise" the new computer only accepts hard drives with SATA interfaces and the older hard drive is only an ATA (i am probably saying this all wrong, i am good at tinkering, not with getting names correct).

so i figure why not to a puter->puter file transfer. well, the computers refuse to talk to eachother. i connected them with a cat-5 crossover ethernet cable and when the new puter tries to talk to the old puter, it is like the old puter is giving us the silent treatment. i get a 712 (or was it 721) error and says the old puter is not responding.

i ran the networking wizards to try to put them in the same workgroup and they both say they are, but neither is talking to the other.

oh, and btw, her puter is on a wireless network card which IS talking to my puter. so i can see the new puter fine, but the old puter is off in limbo.

any help which would lead to a successful file transfer (and not to throwing the puters off the balcony) would be greatly appreciated.

oooh, one more thing. for some reason she figured she did not need a floppy drive, plus dell gave her a dvd/cd rom, no burning ability at all. (which was really stupid since now there is no way of writing anything with her computer onto any kind of disc.)
 

A:computer to computer file transfer problems

When the two machines are connected using the cross over network cable, check that both network cards LED lights light up, as to show there is some kind of connection.

Go to a dos window, type IPCONFIG. Get the IP of the machine, go to the other machine, open a dos window and type PING +the ip number. If you get a ping back, then you have a connection. If you dont, then go into the IP network properties of each machine, and set the SUBNET masks to 255.255.255.0, then give each PC a fixed IP, eg. 192.168.0,10 & 192.168.0.11, reboot and try pinging again.

If you are getting pings, in your network settings, make sure you have the 'client for microsoft network installed' & also file sharing, then look at the workgroup names, make sure there the same, and also make sure the PC names are NOT the same.

Once all this is done, share a folder. If you cant find how to share, make sure the file-sharing is installed and enabled.

Then browser the network and transfer your files..
 

2 more replies
Answer Match 50.82%

i want to share massive amounts of files between computer A and computer B via the internet. what is an easy client i can download some kind of FTP client that A and B can have that enables direct connection to send files with unlimited transfer, is there some kind of solution to set A and B up as servers?
 

A:computer to computer file sharing via internet

http://www.guildftpd.com/index.php
 

1 more replies
Answer Match 50.82%

I have a laptop that I use as a sort of 'network server', though its really not. I have a Local Area Connection completely set up along with file and printer sharing, and I play a client game on my desktop that is linked to a software server that is hosted on the laptop. The laptop is jacked right into the router, and so is my desktop. I have to periodically update files on the laptop from my desktop to keep the game running nicely, and I have to re-start the software server manually at the laptop using a batch file I can view and edit on my desktop.

So, if I can view and edit said batch file, then why can't I make the laptop run the batch from my desktop? (It's a fair walk from desktop to laptop.) If you guys can make this work, that would be great. I don't know for sure, but you might need the ip addresses for both computers(found using cmd > ipconfig):

Desktop's IP: 192.168.0.106
Laptop's IP: 192.168.0.105

Thanks for reading, and I hope someone can help! I hope that wasn't too complicated to explain.
TSG SysInfo output:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Celeron(R) CPU 2.53GHz, x86 Family 15 Model 4 Stepping 1
Processor Count: 1
RAM: 1014 Mb
Graphics Card: Intel(R) 82865G Graphics Controller, 96 Mb
Hard Drives: C: Total - 73171 MB, Free - 24372 MB;
Motherboard: Dell Computer Corp., 0CF458
Antivirus: AVG Anti-Virus Free... Read more

A:How do you make another computer run a batch file from your computer?

12 more replies
Answer Match 49.14%

What's the easiest way to transfer files from one computer to another when the source computer only has one serial port, which is used by the mouse? The source computer doesn't have any USB ports nor a CDRW. Any help will be appreciated. Thanks.

Len Piko - [email protected]
 

A:Computer to Computer File Transfer

Does the source computer have a parallel (printer) port?

If both computers are running a version of Windows 95 or better you can use Direct Cable Connection to transfer data between the computer's parallel ports.
 

3 more replies
Answer Match 49.14%

DDS (Ver_09-02-01.01) - NTFSx86
Run by TEDCRUSHER33 at 12:14:46.67 on Thu 03/05/2009
Internet Explorer: 8.0.6001.18372 BrowserJavaVersion: 1.6.0_07
Microsoft? Windows Vista? Home Premium 6.0.6001.1.1252.1.1033.18.958.138 [GMT -5:00]

AV: AVG Anti-Virus Free *On-access scanning enabled* (Updated)

============== Running Processes ===============

C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\nvvsvc.exe
C:\Windows\system32\svchost.exe -k rpcss
C:\Windows\System32\svchost.exe -k secsvcs
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\SLsvc.exe
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\rundll32.exe
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\system32\WLANExt.exe
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.e... Read more

A:hjt log file from my computer ,, computer is all messed up help please

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.comDDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Follow the instructio... Read more

2 more replies
Answer Match 49.14%

I have an Toshiba Satellite Series P25 XP computer that I use for photo editing and storage and I would like to be able to transfer photo files to my Windows 7, 64 bit computer without having to use flash drives. Is it possible to do this with a USB to USB cable? Or do I have to use a special cable like the help section mentions?
Dick

A:Computer to computer file transfer

Maybe this could be the solution you're looking for?

biz.TigerDirect.com | WEDBB1541 | Save up to 50% off j5 Create plug and play devices

7 more replies
Answer Match 48.72%

Hi to everyone who reads this.

When I want do a CHKDSK on C, I get prompt to schedule this task the next time my pc boots, no problems here though.
But after booting up I don't see the CHKDSK-information displayed as it should in normal circumstances. My screen stays black during the CHKDSK Scan, whilst I believe the scan runs as it should be. I derive that thought from the fact that I had a disk surface issue, and after doing the CHKDSK scan the problem was gone.
So the only thing I'm lacking is the information while in progress.

Does anyone have a clue on how to fix that?

Thanks for your time and advice.

Best regards Carlo

A:CHKDSK Information is missing...

Hello Carlo,

Did you change your boot screen by chance? Doing so results in a blank screen while chkdsk runs as boot. The information at the top of the tutorial at this link above can give more details about how you can use the sfc/ scannow command to restore the default boot screen to see chkdsk afterwards.

For now though, the tutorial below can show you how to read the chkdsk log to see what it said.

Check Disk (chkdsk) - Read Event Viewer Log - Windows 7 Forums

Hope this helps,
Shawn

5 more replies
Answer Match 48.72%

chkdsk.exe missing from C:/windows/system32. I therefore cannot run checkdisk through drive properties, command prompt, or start/run.

When trying to run it from the run box I receive the following error:
Windows cannot find 'chkdsk'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.

When trying to run checkdisk from the command prompt I receive the following error:
'chkdsk' is not recognized as an internal or external comman, operable program or batch file.

And when trying to run it from the disk's properties window I click the check disk button and nothing happens. I can't find any help on this in all of my searches so any help would be greatly appreciated.
BTW I am running Windows XP pro sp2
 

A:Chkdsk.exe missing from system32

Take a look.

http://reviews.cnet.com/5208-6121-0.html?forumID=45&threadID=22053&messageID=387992
 

3 more replies
Answer Match 48.3%

So here's my situation. When the computer was being started, it would check the files and verify, etc. Last night, for the first time it started "recovering orphaned files". Now my mother simply turned it off and turned it back on while this was going on. When it turned on, it went to just chkdsk and not the recovering of the files. Now my Microsoft Internet Explorer is not working properly when it comes to playing videos or games anything that requires Flash or Java. I thought that it might be as simple as redownloading the Internet Explorer 8 again, but nothing.

I checked the system info and two files are missing and one is damaged for Java in the Internet Explorer file. I tried doing the run>chkdsk/f but it said that the drive cannot be locked and to answer yes or no whether to check the drive on restart. I checked yes, it already completed all of it, and said the volume was clean. I tried to do it again chkdsk/f and it gave me the same thing.

Can anyone give me a step by step as to what I should do and how I can recover these files? Sorry my post is so long, but I wanted to detail everything I've done.
 

A:Recovering Files that are missing? Chkdsk, etc

8 more replies
Answer Match 48.3%

I've sneakily installed a game Rome Total War on my work computer many times, but now this error keeps returning.
I've included screenshots of my computers basic info, the error message, and the current location of the missing mss32.dll file.

PLEAZE HALP
 

A:Computer says missing Mss32.dll when its not missing.

Well since it's your work computer ask your Supervisor or IT Department. I'm sure they'd be happy to help.

Since this is not something that we will assist with I'm closing this thread.
 

1 more replies
Answer Match 48.3%

I've sneakily installed a game Rome Total War on my work computer many times, but now this error keeps returning.

I'm trying not to create a duplicate thread however my first attempt at seeking help was immediately shut down by Cookiegal who assumed my work computer was at an establishment which had either a supervisor or IT department that I had not thought to contact first.

I'm including screenshots of my computers basic info, the error message, and the current location of the missing mss32.dll file.
 

A:Computer says missing Mss32.dll when its not missing.

Your previous post was closed because an administrator told you we will not help with work computers when you appear to eb bypassing their restrictions
you stated that you "sneakily installed a game Rome Total War on my work computer"

This is closed
do not start new threads about this again
 

1 more replies
Answer Match 47.88%

Hello everyone, I have a Dell Optiplex 760 SFF that has both win 7 and win 10 installed on a 1TB hard drive in the following partition order:
500 mb system reserve, 100gb win 7, 750gb data, 80gb win 10
I've also disabled the metro bootloader, as it wastes times when booting to win 7.

Whenever I reboot to Win 7 after booting into Win 10 before, the system requires a chkdsk of the Win 10 and data partition. I looked around the forums here and the win 10 forums, and have disabled fast boot in Win 10 as mentioned throughout, but it still results in chkdsk being required.

I've tried to do this on other computers such as an MSI laptops with Win7, with similar results.

Is there something else I need to do so that Win 7 doesn't do disk check?

Thanks for all the help in advance.

More replies
Answer Match 47.88%

Hello,

I recently had some major problems with XP. I put in my Installation CD to reinstall Windows XP and chose to "Repair" my current install. The CD successfully repaired, restarted, and then ran a CHKDSK scan to "verify files, indexes, security descriptors," etc. It finished the scan and prompted me with: "Windows has finished checking your disk. Please wait while your computer restarts."

It has been stuck on this screen for the last 2 hours.

Please help. ASAP.

A:Computer freezes after XP Pro "Repair" / CHKDSK verifying

Can you skip the chkdsk? Usually at the start you can opt out. What happens then? Can you start in safe mode w/ command prompt? Perhaps doing a fixmbr and fixboot would help. Repair installs only work about 50% of the time.
Hope you saved any critical data before all of this.

2 more replies
Answer Match 47.88%

As it says above chkdsk ran and said wait while it restarts, it's been 45 minutes now and getting annoyed.
This all started after I shut down my machine last night and tried to start it this morning.
It hung on the splash screen for over an hr, when I tried to run repair I was unable to system restore as the mouse and keyboard didn't work.
Specs are posted below.

I have not added any hardware or software between it running fine yesterday prior to shut down and starting it .

Another issue is that it will not boot from the dvd it loads the files, does the splash screen then freezes on a black screen.
Also I cannot boot into safe mode, pc restarts every time I press f8.

Can now access safe mode, start up repair etc but, they either hang on a black screen ( start up repair) or BSOD ( safe mode).
This is very annoying as I did nothing other than shut down last night.
Help/advice appreciated.

A:After chkdsk runs it hangs on "please wait while your computer"

Try keeping only one RAM stick and then boot with the win7 dvd.

4 more replies
Answer Match 47.88%

So I was watching something on my PC and got a BSoD with almost no information on it(or at least none that I can read)
Imgur: The most awesome images on the Internet

I have tried disconnecting all usb besides keyboard and mouse, same error. When I try to system restore my hard drive with windows on it isn't listed in the options
http://i.imgur.com/oMULECz.jpg
Upon clicking next I get an error message
Imgur: The most awesome images on the Internet

I cannot System Restore to an earlier date, I cannot safe mode either with or without cmd or networking. When I ran Startup Repair in f8 System Restore I got this as a result
http://i.imgur.com/FXZhVlj.jpg

A:0x7B chkdsk Hard Drive Missing?

Hi Laming,

Welcome to the 7forums.

Please try to run SeaTools, read the instructions carefully.
Please try scanning offline your hard drive.


Diagnostics Test

 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use



   Note
Do not run SeaTools on an SSD as the results will be invalid.


Diagnostics Test

 Offline Malware scan

Run Windows Defender Offline to scan the hard drive for malware.

For more information, please read a troubleshooting guide by Arc
Troubleshooting stop 0x7B and stop 0xED

1 more replies
Answer Match 47.88%

Hey
So I did a disk repair for one of my hard drives (not the system drive ) using check disk because I could not open my folders it would say they were corrupted. This followed me powering off my pc while it was shutting down. So after the chkdisk repair my drive was now functioning ok except for one thing; some of my files and were missing. I could not see any Found.xxx folder even after showing hidden files. I then checked my free space and noticed that it had not changed inspite of the files missing one of which was a folder containing 250GB of data which I cant afford to lose. This has led me to think my data is still on the drive but just hidden somehow. How can I recover this data. Please help

A:missing files after chkdsk repair on windows 8.1

Possibly chkdsk take all the files it could not figure out where they were supposed to go and usually places them in a found.000 folder that is located on the root of your hard drive however this is a hidden file.

In the View tab click Show Hidden Files and usually dir0000.chk etc will appear.

This shows the importance of having a backup of your files.

6 more replies
Answer Match 47.88%

Hi Everybody,

I have a missing E: drive on my internal backup disk. Here is what I did that may have caused this:

I currently have Win7 with 2 internal HDDs. C: is a 750GB that came with this eMachine (new) and my backup is a WD 500GB. I have been using this setup lightly for several days and everything was working fine. Three weeks ago I had divided the 500GB backup drive into 4 primary partitions (E:, F:, G:,and H) using XP Pro, SP3. I had just the OS and a few startup files on a separate WD-40GB disk.

Then my old motherboard died, so I bought this new eMachine.

I wanted my two startup files from the 40GB drive, so I disconnected my 500GB backup, and connected the 40GB, setting the jumpers to slave. I accessed the files, and moved them to my new C: drive. Fine.

I decided to run chkdsk on the 40GB, and when it asked if I wanted to dismount it to do that, I said yes, knowing that I was going to remove this drive anyway and put the 500GB back in again. After the chkdsk, I did a quick format.

I removed the 40GB disk, and reconnected the 500GB backup disk.

When I rebooted, my first partition in the 500GB disk, E:, is missing, as if the computer still was obeying the "dismount" instruction. I thought the dismount command would go away after connecting a different hard disk and rebooting. I'm thinking that the computer "thinks" that the first (and only) partition in the 40GB drive (E was dismounted, so now the first partition (of 4, E: again) in the 50... Read more

A:Dismount for chkdsk, diff HDD, E: drive missing

I found the solution right after I posted this question.

I used a free program called "Partition Wizard" that someone else mentioned on this forum.

Thanks, and hope that helps someone else.

1 more replies
Answer Match 47.88%

I tried the recommendations for fixing this below:









 


Follow these steps to grant full permissions to the folder where the files are stored: 1. Right click on the folder on the external drive and click on
properties. 2. On the property window, click Security tab.
3. Now click on Edit and then click Add.
4. Now type everyone in the box and
click OK.

5. Then check Full control check box.

6. Click on Apply and then click OK.
You may also try the below mentioned steps:
1. Click on Start. 2. Go to Control Panel. 3. Select "SOUND". 4. Double click on speakers. 5. Click on advanced tab and then uncheck enable audio enhancements.






But then I received the error message that I don't have rights to edit and add.  Why would this be?  I am the administrator?

Thanks!

A:Windows Media Player cannot access the file. The file might be in use, you might not have access to the computer where the file is stored, or your proxy settings might not be correct.

Hi,
Please first take ownership of the folder or files, then give yourself full control permission.
Learn How to Take or Assign Ownership of Files and Folders
http://technet.microsoft.com/en-us/magazine/ff404240.aspx
Yolanda Zhu
TechNet Community Support

3 more replies
Answer Match 47.04%

Hi, happy holidays for everyone.
This is my first post on this forum.
When I tried to make a backup I've got an error message saying:
Backup failed
0*80070017 cyclic redundancy control failed
I've searched the net for that code and they suggested chkdsk, I've done that
and ran sfc/scannow with elevated privileges. Sfc did correct some problems but there is one problem he could not repair.
I've looked at the log in c:\windows\logs\cbs and searched with the tag [SR] to narrow down, and there was a problem that occured several times.
Windows SIdebar settings.ini is corrupt or missing (64-32bit program files) and when sfc tries to look for backup of the source file it also stated that this one is corrupted.
So I was wondering I've someone knows a method to correct this?
Maybe if there is a way to reinstall the sidebar my problem could be solved (?)
I can't use System restore because I recently deleted those checkpoints, because of an space lack on that partition.
Any help will be much appreciated.
I've you need more info please feel free to ask.
Sorry if my English isn't perfect, not my native lingo.

Best regards Carlo

A:backup failed, chkdsk and sfc, sidebar settings.ini missing

Originally Posted by witten1972


Hi, happy holidays for everyone.
This is my first post on this forum.
When I tried to make a backup I've got an error message saying:
Backup failed
0*80070017 cyclic redundancy control failed
I've searched the net for that code and they suggested chkdsk, I've done that
and ran sfc/scannow with elevated privileges. Sfc did correct some problems but there is one problem he could not repair.
I've looked at the log in c:\windows\logs\cbs and searched with the tag [SR] to narrow down, and there was a problem that occured several times.
Windows SIdebar settings.ini is corrupt or missing (64-32bit program files) and when sfc tries to look for backup of the source file it also stated that this one is corrupted.
So I was wondering I've someone knows a method to correct this?
Maybe if there is a way to reinstall the sidebar my problem could be solved (?)
I can't use System restore because I recently deleted those checkpoints, because of an space lack on that partition.
Any help will be much appreciated.
I've you need more info please feel free to ask.
Sorry if my English isn't perfect, not my native lingo.

Best regards Carlo




Hi Carlo and welcome,

Read these tutorials and see if these can help.

Windows Sidebar will not Start in Vista

Windows Sidebar - Gadget Not Displayed Correctly

As to your other problem, try a startup repair if possible.

System Recovery Options
You can generate a system health report to see if ... Read more

15 more replies
Answer Match 47.04%

I run into this problem often. When working with Photoshop files (PSD in the most recent case), sometimes when I make a change and then try to save the changes I come up with this error dialog. My work flow is always the same - I am the computer's administrator.
I am the only person with access to this computer. There are no other users on this computer. This computer is not tied to any server or network. My files are generated from my own work obtained from my camera. I normally save changes to the file several times
so I won't lose my work. I can save the file using a different name, but then I cannot delete the original file unless I reboot the computer and open it up again. Please explain why this randomly reoccurs.

A:File Access Denied - You require permission from the computer's administrator to make changes to this file

Hi dmiddleton123,
"When working with Photoshop files (PSD in the most recent case), sometimes when I make a change and then try to save the changes I come up with this error dialog. "
When did the issue start to occur ?The issue only occur with the specific software ?Have you tried to change another location to saved file or reopen the software (end the software process from the task manager)to have a check ?
This issue is a little weired,please take the following steps to have a check .
1.Run "sfc /scannow" to check the health of the system files .
2.Perform a full scan with an antivirus software .
3.Perform a clean boot to verify whether there is a third party conflict here.
How to perform a clean boot in Windows
http://support.microsoft.com/en-us/kb/929135
4.Create a new administrator and login with it to have a check.There is a possibility that the present account profile has corrupted.
 
If the issue only occurred with the specific software ,it is also recommended to ask for help from the software developer .
Best regards

Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

2 more replies
Answer Match 46.62%

Hello everyone,

I have a bat file that is launched when a torrent finishes downloading on my laptop which launched robocopy to copy it to my server computer.

I want to have the server run a few programs to extract the file and move it to the correct directory structure.

I want to launch a bat file on the server from the first bat file using the call command, however I am not sure if this command will cause my server to execute the bat or my laptop to execute the bat.

Is there a way to get my server to run the bat from the bat that is run on my laptop?

I think that if I use the call command that it will run the called bat on my laptop even though the bat is located on my server.

Thanks in advance
-S

A:Starting a bat file on networked computer from local bat file question

Your exactly correct that the batch file will run on your laptop. The only way to run from the server is to use Remote desktop RDP from your machine to the server which will allow you to run the program in the server's memory.
Or, you could have a planned event (Task Manager) on your server which would check to see if the file exists at some point in time and then run the batch program in the servers memory space.

Rich

5 more replies
Answer Match 46.2%

I have a similar problem, I'm running an 80GB NTFS Hard drive with a 70GB partition and a 4.6GB backuppartition. When i check free space on the 70GB partition, its only 3GB. But in explorer when I check the size of every folder in C, they add up to only about 26GB. So some 30GB are missing. I checked disk management and there are no extra paritions, and I havent reformatted the disk ever, and have included all hidden files. I'm using windows xp, Any ideas?
 

A:30 GB Missing from my Computer

I would defrag drive after deleting the cache and temp files
also rebuild the page file system by deleting it and then making a new one requir 2 reboots
check all temp and cache place IE and windows firefox or mozilla
 

1 more replies
Answer Match 46.2%

I installed Vista Ultimate on new HDD to my computer and placed a previously used slave HDD from a Vista Ultimate OS. BIOS seems to list it and the drivers are set correctly. Also Disk Management has it listed but it is seen as DISK 1 Dynamic Foriegn. So my computer does not have it listed. What can I do?

A:My computer missing hdd

Hello Han,

Did you have anything on the drive that you still wanted to keep?

In Disk Management, what options do you have listed when you right click on Disk 1 Dynamic Foriegn? If you have a Import Foreign Disk option, then click on it and confirm to add it.

Hope this helps for now,
Shawn

1 more replies
Answer Match 46.2%

The icon for My Computer is missing from the start menu and from the properties > customize.
Also when using Win + e, the Computer in sidebar does not show the C drive.
I have already tried to system restore, but it didn't help.
Any help is appreciated.

Update: If I create a new user account, everything is fine for that account
 

A:Missing My Computer

Has it been missing or did it disappear? Is the current user profile a limited profile?
 

1 more replies
Answer Match 46.2%

Well after fixing the problem with the sata cable lock,i have now another problem.My DVD is missing from my computer ,i have taken out the Samsung one that was there as i thought it was faulty ,i think now it might be OK,i replaced it with a lg model from an older PC but i know its hardly been used.i put the DVD in the drive the led light flashes as if to read the disk ,but then it goes of and that's it . I put the Samsung back in and tried to run the install disk but of course that wont run either. also i can not tell hat jumper is what as the is no stamp to indicate this.What do you guys think the problem is please and would i be better of to buy a sata dvd burner.

A:Dvd is missing from my computer

Welcome
Did you go to search by the start button, type device manager and make sure that the driver is installed?

12 more replies
Answer Match 46.2%

Hello,

I'm new here and this seems like a great place to get computer help. Forgive me if this question has been asked before, but I have searched the forums and tried some of the things I've found and they aren't working.

My CD rom drive isn't appearing when I click on My computer. When I put in a CD that's supposed to start up on closing the drive (game CD) nothing happens. I can hear the drive start to work and then nothing. It's also been popping the door open on it's own. Here are some of the things I've tried:

-Checked the CD in another computer (It worked)
-updated the bios through the IBM website
-ran diagnostics with PC Doctor for windows. This told me there is no CD rom installed or driver is missing.
It mentioned driver MSCDEX. I tried to find this driver online and through IBM with no luck.
-I tried to update the firmware but could not get the firmware to install.
-I tried to fix the registry using some of the steps I found on this site but that didn't work.
-The drive is the one that came into the computer so I believe all the connections are good. I haven't
been inside the computer to mess with them.
-I looked at the device manager to see if it's detected, and there is no CD rom drive listed.

I have an IBM Thinkpad R40e type 2684 KJU running Windows XP. It's probably at least 5 years old.

I think it might be a driver issue, if someone can find me a driver and provide a link with instructions on how... Read more

A:CD rom missing from My Computer

7 more replies
Answer Match 46.2%

It's been quite a few months since I've posted a computer problem (that's a good sign).

Okay, so my problem is exactly what the title is. The My Computer system folder is missing. Sorta. When you open My Computer, you just see a blank area. No hard drives, removable media, or CD drives are shown.

Though when I open My Computer through Explorer (i.e. the Windows+E keyboard shortcut), I get this:



From my perspective, I think that this is either a registry issue or a Windows thing. If the only solution is to reinstall XP, then nevermind (I can live with this problem).

BTW, I added the visual theme and Vista icons after this happened.

A:My Computer is Missing! Really.

Hi,
Try this: Click Start > Run - type sfc /scannow (note the space between sfc and /) in the "box" and click OK.
This procedure will scan/repair the system files. You will most likely have to insert the XP CD.

1 more replies
Answer Match 45.78%

I have two printers, one of which is an Epson Artisan 1430 (very new, installed with current drivers and current firmware) and one of which is a Canon iP6000D (very old, with old, unsupported drivers), and both of them frequently will not actually print anything unless I turn the printer off and back on first. The system thinks the doc went to the printer, but it's landing in the bitbucket instead. This behavior began several months ago, and was not present for at least the first several months after the 10 upgrade.

In both cases, when the symptom crops up, the system and printers may have been on continuously with no sleep, power-off or other reboot (that I know about) for as little as 4 hours since the last doc printed, or as much as several days. If the system has rebooted, the problem becomes *slightly* more likely but not certain. When it happens, usually both printers are impacted. (I have not consistently tested it, but so far it appears that when one needs a power-off/on cycle, the other will as well.) When the problem is present, a document sent to the printer pops up in the queue list barely long enough to read the job description, and then it's *gone*; the system apparently thinks it went to the printer successfully, as no error message is presented.

So far, I have found precisely zero mention of anything relevant to this problem anywhere. I've got the hyperannoying (and incredibly TJFS) "automatic printer mismanagement" feature turned off, and... Read more

More replies
Answer Match 45.78%

Dear all,

I am having trouble getting a no- cd crack to run for my Broken Sword 4 game. I know I should do the honest thing and go out and buy the game but it appears I'm paying for it in problems now!!

Does anyone know a solution to this? I've downloaded something called Paretologic PC Health Advisor because I was informed it may fix the problem for me but unless I'm using it wrong, it hasn't worked.

Any advice would be great appreciated!

Thanks!

A:mss32.dll is missing from your computer

benny,

Be ye sure that your sins will find you out.

Learn from this experience.

Pay for your software.

I will not assist pirating.

I will show you how to fix Microsoft system files.

But first, I need you to fill in your system specs.

How to fill in your system specs
Click on User CP (top left of PC Help Forum window) |
Under Settings and Options (in column on left), Edit Options |
Thread Display Options section |
System Specs option, choose Yes |
fill in as much info as possible |
Scroll to bottom, SAVE CHANGES button

You can use Speccy or SIW (links in my sig) to gather the info.

8 more replies
Answer Match 45.78%

It is missing from the Device Manager. It has a question mark-
I need to find the exact driver for the CD-Rom/DVD drive can someone send me the correct link? I don't seem to find one.

My Model Presario V3000 Compaq. I am using XP home edition.
 

A:Missing CDRom-DVD on My computer

6 more replies
Answer Match 45.78%

Dear Community,

I have recently found out that my laptop is missing DVD/CD-ROM from my laptop. I have checked device manager the whole dvd/cd-rom section is missing from device manager.

The driver is operating fine as i am able to boot from it but i am unable to use it while logged in on windows itself.

if you google the information you will likely to find that there is Microsoft fix-it utility but it does not solve the problem. i have also deleted the the upper and lower filters but still the problems exists.

I have also unpluged and plug the dvd/cd-rom drive from the motherboard but i am unable to find solution to the problem.

Additionally, i have also perfumed sfc /scannow and registry fix along with running windows repair consul but I am unable to find the solution.

I have also used the dell hardware diagnostic utility and its shows that the driver is working fine but its just the windows which is not recognising the problem.

let me know.

Thanks

A:[SOLVED] DVD/CD-ROM missing from Computer

Boot into Setup (Bios) make sure CD/DVD rom drive is listed. In the Device Manager go to the Tool bar and click View/Show Hidden Devices. If your CD/DVD drive is listed there with a Red X right click it and choose Enable.
If it shows as a Yellow Flag, then running the Microsoft FixIt usually works, which disables the Upper and Lower Filters, but it seems you have done that already.

19 more replies
Answer Match 45.78%

Hello,
 
I am unable to start up my computer in regular or safe mode because of a message which says the hal.dll file is missing. This has happened after installing the latest service pack update about a week ago. I have XP Professional and a Service Pack 2 disc.
 
So far I have attempted a repair installation, but after the "To setup Windows XP now, press ENTER." screen the R option does not appear.
 
I have tried to run "bootcfg /rebuild" from the Recovery Console, but I get a "Failed to successfully scan disks" message.
 
I have tried "chkdsk /r" but I still get the missing hal.dll message on startup.
 
I have tried to expand the file from the XP disc with "expand d:\i386\hal.dl_ c:\windows\system32", but I get a permission denied message.
 
In my Windows Professional Setup I have:
 
-: Partition1 [FAT] 55MB <45MB free>
C:Partition2 [NTFS] 152531MB <45449 free>
 
I don't know what Partition1 is. I've heard fixboot may help fix things but I'm not sure what to do.
 
There are some important files on this drive which I would like to retrieve and I'm quite stressed out, does anyone have any suggestions? Thanks.
 
- Anthony

A:Hal.dll Missing - Cannot Access Computer

If it is a Dell then the 45Mb partition is the Diagnostic partition.
 
If it is a Dell, when You turn it on and the Dell Logo appears, Press F12 for the Boot Device menu and select the Diagnostic partition and run the diagnostics. At a Minimum I suggest the Memory, Hard drive tests. You could also run the Motherboard test if desired.
 
Not to mention that the latest XP service pack is SP3.
 
Once You are sure the Memory and Hard Drive are OK, Then presuming enough free drive space You could always install a second copy of Windows. For example You could install it to C:\Doors or C:\Window2.
 
That is only if You do not care if You get the old windows running again.
 
Test first. If it isn't a Dell let me know and I can suggest other Drive and memory testing software.
 
Good Luck
Roger

25 more replies
Answer Match 45.78%

Hi, I'm new here in bleeping computer .
My problem is how to restore "Repair your Computer" option in Advanced boot options ?
I deleted system reserved and transferred MBR to my System Partition .
This is how it looks :

A:Repair your Computer missing

Hi Gx7, I deleted system reservedThat's the location, as you probably know, for the Windows Recovery Environment files that puts "Repair Your Computer" on the Advanced Boot Options menu.Easy solution:If you have the Windows 7 Installation DVD, then you already have Windows Recovery Environment files. Just boot from DVD to repair your computer. If not, then you can always create a Windows 7 Repair CD. It does the same thing.Harder solution:If you are want to create another partition on your hard drive to manually place the Windows Recovery Environment (Difficulty level: Advanced), you could have a read here: How to install Windows RE on the hard disk.Warning: You should always backup important files before partitioning a hard drive.You still need the Windows Installation media and Windows AIK.I have used the procedure in Step 2 (link "here") to add the WIM file to the C: drive and add "Repair Your Computer" option to a Vista computer. I did not create a separate partition. (Difficulty level: Moderate)Good luck.

1 more replies
Answer Match 45.78%

Hey guys,

Having some issues with my HTPC. About a month ago I noticed it was off (I normally leave it running), and it refused to turn back on. I poked and fiddled with it for a while, and since I was planning on upgrading it soon anyway, I ordered some new parts, thinking that the motherboard had maybe fried (it's a few years old).

Original ("O") rig:
Asus A8N-SLI mobo
8600 GT graphics card
Unknown AMD CPU (got it from my roommate)
Antec 500W PSU

New ("N") rig:
Foxconn A7GM-S mobo
Integrated graphics
Athlon X2 4850e 2.5 ghz CPU
Crucial DDR2 2x2GB PC6400 800MHz memory

The hard drives are a 250gb IDE main drive, and a 500 gb SATA drive.

So, here's the problem and the various solutions I have tried.

At first, I thought it was the motherboard as I wrote above. It turns out that the power supply was probably to blame - I can't get power through it any more (stupid of me not to check this first). So I ordered a new Sea Sonic 300W High-efficiency PSU and I also have an old stock power supply I can test with as well.
Both builds using the new and stock PSU clearly have power - LEDs go on on the ASUS and my wireless mouse receiver's lights go on for both. But when I click the power switch, absolutely nothing happens, regardless of which power supply I use and which board I use. No fans turn, no noises, nothing. It's driving me mad.

Things I have tried:
- Placing the boards on cardboard in case of grounding issues: no change
- Unplu... Read more

A:Computer won't turn on - what am I missing?

16 more replies