Tech Problem Aggregator

Blue Screen BIOS/ACPI Error--Striped Screen Upon Reboot: Please help!

Q: Blue Screen BIOS/ACPI Error--Striped Screen Upon Reboot: Please help!

Specs: HP Compaq 5100 SFF Running XP PRO SP3 With A 2.8 GHz P4 and 3 GBs of RAM.
Let me tell you what happened. I was having problems with a very, very slow CD/DVD combo drive and I looked around and around and could find only one thing that seemed like it would help and it made perfect sense. You see, I have a good computer, but it is a Small Form--not allowing me to add much to it. Anything that I have added has to be added as a slave device. Anyway, my configuration was this: My boot drive is a 80 GB SATA drive. Then, I have only one IDE Controller on the Motherboard, which has the CD/DVD drive as master and an old 40GB Hard Drive as slave. My optical drive was turtle or snail slow when viewing pictures, copying/pasting files to the HD, and anything that is data oriented. So, what I did was disconnect the slave HD drive to see if that would make it run like an optical drive was supposed to run, a little slow, but bearable. When I did this, and reconnected and rebooted, it would not boot to anything--safe mode, windows, last known configuration, hp recovery, 2 boot discs, nothing! At the opening screen, I get the opening HP screen, but it has stripes. I go into BIOS and the menus are striped. If I try to boot to Windows/Safe Mode, I get either a black screen where nothing happens, an endless pause, or a Blue Screen telling me that I have a BIOS error and they have stopped at this point to avoid any further damage. There's also a message telling me to press F7 to disable ACPI so that I can continue with an installation. This has never happened to me before. Because I took out a drive that was a slave drive. Please help me with any advice that you can.

A: Blue Screen BIOS/ACPI Error--Striped Screen Upon Reboot: Please help!

 to the Bleeping Computer forum.
 
 
 

 
At the opening screen, I get the opening HP screen, but it has stripes. I go into BIOS and the menus are striped.
 

 
 
My assumption is one of the memory sticks got loosed from it's slot when you played with the HDD. Please remove the memory modules and use a pencil rubber to clean it's gold plated contacts.  After making sure the contacts are clean and shining, inset them to the slots. If there is more than one module, connect one at a time. Now try to boot the system.
 

8 more replies
Answer Match 105%

When i try to boot up my pc i get a blue screen with this:
STOP: 0x000000A5 (Parameter1, Parameter2, Parameter3, Parameter4)
The ACPI Bios in this system is not fully compliant to the specification. Please read the Readme.txt for possible workarounds, or contact your system vendor for an updated bios.

The bios in this system is not fully ACPI compliant. Please contact your system vendor for an updated bios. If you are unable to obtain an updated bios or the latest bios supplied by your vendor is not ACPI compliant, you can turn off ACPI mode during text mode setup. To do this, simply press the F7 key when you are prompted to install storage drivers. The system will not notify you that the F7 key was pressed--it will silently disable ACPI and allow you to continue your installation."

I try pressing F7 and disabling ACPI but it still doesnt work. Im running an ASUS a8n32 SLI Deluxe, AMD Athlon x2 4400+, 1gb Corsair TWINX XMS3200, and a wd 320gb sata. If it might help for the first paramater i get 0x00000002.
 

A:Blue Screen/BIOS/ACPI

7 more replies
Answer Match 105%

When i try to boot up my pc i get a blue screen with this:
STOP: 0x000000A5 (Parameter1, Parameter2, Parameter3, Parameter4)
The ACPI Bios in this system is not fully compliant to the specification. Please read the Readme.txt for possible workarounds, or contact your system vendor for an updated bios.

The bios in this system is not fully ACPI compliant. Please contact your system vendor for an updated bios. If you are unable to obtain an updated bios or the latest bios supplied by your vendor is not ACPI compliant, you can turn off ACPI mode during text mode setup. To do this, simply press the F7 key when you are prompted to install storage drivers. The system will not notify you that the F7 key was pressed--it will silently disable ACPI and allow you to continue your installation."

I try pressing F7 and disabling ACPI but it still doesnt work. Im running an ASUS a8n32 SLI Deluxe, AMD Athlon x2 4400+, 1gb Corsair TWINX XMS3200, and a wd 320gb sata. If it might help for the first paramater i get 0x00000002.
 

A:Blue Screen/BIOS/ACPI

Here is the Windows XP fix for this from Microsoft. Please print for rerference on this one.

http://support.microsoft.com/default.aspx?scid=kb;en-us;831691&sd=ee
 

1 more replies
Answer Match 101.64%

blue screen appears when i open my pc. What should i do????

A:Blue screen appears say BIOS not fully ACPI compliant what should i do?

Hi rence.slvdr -First, have you changed any settings (BIOS or otherwise) or do you think it may be an infection.Next can you please download BlueScreenView to help us to check your problem (if you can access the internet).If internet is a problem, then it can be loaded to a good working computer and transferred with a USB flash drive.http://www.nirsoft.net/utils/blue_screen_view.htmlUnzip the downloaded file and double click on BlueScreenView.exe to run the program.when scanning is done, go to EDIT - Select AllGo to FILE - SAVE Selected Items, and save the report as BSOD.txtOpen BSOD.txt in Notepad, copy all of the content, and paste it into your next reply Thank You -

2 more replies
Answer Match 99.96%

Hi,I have a major problem with my laptop where i can now only operate in safe mode.My original problem was the screen just went black and nothing could be done(no mouse pointer or nothing) ctrl alt del didn't work or escape. I just had to power off. When restarted the screen would be black background with a lot of @ icons dotted all over the screen and the screen would then be striped blue. System restore wouldn't work. I decided to send it to a local shop for fixing. It came back after ?60 charge! stating that laptop boot viruses fixed and system updated... happy daysbut now it is back again!!!This time system restore did work and i thought phew! but the problem keeps returning and after about 4 system restores it won't restore anymore....help!The virus/fault has no pattern as to when it returns, could be on start up, sometimes when online. another time just whilst using the desktop and also when using my F drive to watch a cd.all info posted below as per prep guide.will apreciate any help pleaseDDS (Ver_2012-10-19.01) - NTFS_x86 NETWORKInternet Explorer: 7.0.6000.16982Run by matt at 13:01:31 on 2012-11-05Microsoft? Windows Vista? Home Premium 6.0.6000.0.1252.44.1033.18.2046.1244 [GMT 0:00]..============== Running Processes ================.C:\Windows\system32\wininit.exeC:\Windows\system32\lsm.exeC:\Windows\system32\mfevtps.exeC:\Program Files\Common Files\McAfee\SystemCor... Read more

A:cpu won't start in vista premium get blue screen and striped screen

Greetings marlonmaya and to BleepingComputer's Virus/Trojan/Spyware/Malware Removal forum.My name is Oh My! and I am here to help you! Now that we are "friends" please call me Gary. If you would allow me to call you by your first name I would prefer to do that. ===================================================Ground Rules:First, I would like to inform you that most of us here at Bleeping Computer offer our expert assistance out of the goodness of our hearts. Please try to match our commitment to you with your patience toward us. If this was easy we would never have met. Please do not run any tools or take any steps other than those I will provide for you while we work on your computer together. I need to be certain about the state of your computer in order to provide appropriate and effective steps for you to take. Most often "well intentioned" (and usually panic driven!) independent efforts can make things much worse for both of us. If at any point you would prefer to take your own steps please let me know, I will not be offended. I would be happy to focus on the many others who are waiting in line for assistance. Please perform all steps in the order they are listed in each set of instructions. Some steps may be a bit complicated. If things are not clear, be sure to stop and let me know. We need to work on this together with confidence.Please copy and paste all logs into your post unless directed otherwise. Please do n... Read more

63 more replies
Answer Match 95.76%

Hello, I have an HP Pavilion g series laptop (running win7) that is in a continuous restarting loop. This happened after the computer auto updated (windows update). I do not know what was updated, but now every time the laptop starts up it seems to be in a continuous rebooting loop after the windows logo then a blue flash. I am unable to go into safe mode or any other mode as I keep getting redirected to a page that gives me two options:Launch Startup Repair or Start Windows Normally. Startup repair gives me the same results as trying to run in safe mode.

By turning the auto-restart on system failure off i was able to read what the blue error message, which says:
-

A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is your first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check you hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive curruption, and then restart your computer.

Technical information:
***STOP: 0X0000007B (0xFFFFF880009A9928,0xFFFFFFFFC000000D,0x0000000000000000,0X00000000000000000)

-
Can someone give me advice on how to solve and prevent this problem? I am currently using a different laptop to access this forum.
kodex

A:Help with blue screen auto reboot, Stop: 0x0000007B error screen

Bug Check 0x7B: INACCESSIBLE_BOOT_DEVICE

The INACCESSIBLE_BOOT_DEVICE bug check has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.





Quote:
Cause

The INACCESSIBLE_BOOT_DEVICE bug check frequently occurs because of a boot device failure. During I/O system initialization, the boot device driver might have failed to initialize the boot device (typically a hard disk). File system initialization might have failed because it did not recognize the data on the boot device. Also, repartitioning the system partition or installing a new SCSI adapter or disk controller might induce this error.

This error can also occur because of incompatible disk hardware. If the error occurred at the initial setup of the system, the system might have been installed on an unsupported disk or SCSI controller. Some controllers are supported only by drivers that are in the Windows Driver Library (WDL). (These drivers require the user to do a custom installation.)


Further Reading...
Bug Check 0x7B: INACCESSIBLE_BOOT_DEVICE

1 more replies
Answer Match 94.5%

I have a Intel DG31PR Motherboard, and with a new Galaxy GeForce GT520 w/2048mb just installed into it I get the below mentioned error... but with out the card installed and using onboard video.. I get no error at all and it boots up just fine...

System is a cpl years old
OS INSTALLED ON NEW DRIVE 1 WEEK AGO

Can anyone help me with this error or know how to correct it.. please help...
thank you very much in advance..

****BLUE SCREEN ERROR MESSAGE****

The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS.
Technical information:
*** STOP: 0x0000000A5 (0x0000000000001000, 0x0000000000000000, 0x00000000FFFFFFFF, 0x0000000000002000)"

SYSTEM INFO:
7 ultimate 64bit
CPU: intel core 2 duo
E4700 @2.6ghz
Memory: 2gb x 2 dual channel
800mhz
H.D.Seagate sata 1ter.
450 watt PS

A:Blue screen ACPI error after installing a New Graphics Card plz HELP

Hi.

You dont have any minidumps in your uploaded folder.

Go to C:\Windows,find the folder with the name Minidump,in this folder find the most recent minidumps and copy paste them in desktop.Then in desktop zip this minidumps and upload them here using the attachment clip.

If the minidump folder is empty,you may need to enable minidumps by following these steps Dump Files - Configure Windows to Create on BSOD

9 more replies
Answer Match 94.5%

I have a Intel DG31PR Motherboard, and with a new Galaxy GeForce GT520 w/2048mb just installed into it I get the below mentioned error... but with out the card installed and using onboard video.. I get no error at all and it boots up just fine...

Can anyone help me with this error or know how to correct it.. please help...
thank you very much in advance..

****BLUE SCREEN ERROR MESSAGE****

The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS.
Technical information:
*** STOP: 0x0000000A5 (0x0000000000001000, 0x0000000000000000, 0x00000000FFFFFFFF, 0x0000000000002000)"

SYSTEM INFO:
7 ultimate 64bit
CPU: intel core 2 duo
E4700 @2.6ghz
Memory: 2gb x 2 dual channel
800mhz
H.D.Seagate sata 1ter.
450 watt PS

A:Blue screen ACPI error after installing a New Graphics Card plz HELP

  
Quote: Originally Posted by SdSteve760


I have a Intel DG31PR Motherboard, and with a new Galaxy GeForce GT520 w/2048mb just installed into it I get the below mentioned error... but with out the card installed and using onboard video.. I get no error at all and it boots up just fine...

Can anyone help me with this error or know how to correct it.. please help...
thank you very much in advance..

****BLUE SCREEN ERROR MESSAGE****

The BIOS in this system is not fully ACPI compliant. Please contact your system vendor for an updated BIOS.
Technical information:
*** STOP: 0x0000000A5 (0x0000000000001000, 0x0000000000000000, 0x00000000FFFFFFFF, 0x0000000000002000)"

SYSTEM INFO:
7 ultimate 64bit
CPU: intel core 2 duo
E4700 @2.6ghz
Memory: 2gb x 2 dual channel
800mhz
H.D.Seagate sata 1ter.
450 watt PS



No DMP files included in upload please try this method

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Atta... Read more

9 more replies
Answer Match 92.4%

I am not a novice with computers. I've been programming and repairing PCs since the 1980s, but this one has got me stumped. It's the craziest thing I've ever seen.

The computer is a pretty old HP Pavilion 8660C. It's got a 533 MHz Pentium 3. Yes, I know this this is pre-historic. I was just doing this for kicks, to see how well it could handle Windows 7.

A few days ago, I put a 160 GB hard drive in it, wiped it and installed a fresh copy of Windows 7 Ultimate. It worked absolutely perfectly for 2 days. Then last night, I found an extra 256 MB PC-133 SDRAM stick in a box of old parts I have. I used it to bump up the RAM in the Pavilion from 384 MB to 512 MB.

I turned the machine back on, at first it seems all is fine. It POSTed, registered all 512 MB of RAM... and in the middle of booting back into Windows, CRASH! It gives me a blue screen of death. STOP 0x000000A5.

"The BIOS in this system is not fully ACPI compliant. Please contact your vender for an updated BIOS."


As far as I know, there is nothing about changing RAM size that could possibly break the ACPI compatibility of a BIOS. Even so, I shut it down again, and put the previous stick of RAM back on the motherboard. At this point it's the exact same configuration as before, when Windows 7 was running fine on it for 2 days.

Turned it back on, and it STILL crashes with that stop error! At this point I think, well the BIOS is from 1999. Maybe there's some intermittent ACPI bug in it. So, I downloaded the ... Read more

A:[SOLVED] Out of nowhere, now get "BIOS not fully ACPI compliant" blue screen

You should only use RAM that is in matched pairs with the installed RAM. See if this helps: "Stop 0x000000A5 the ACPI BIOS in the system is not fully compliant with the ACPI specification" error message when the computer resumes from hibernation

5 more replies
Answer Match 91.14%

I have a computer that's only a few months old that I'm having problems with. Every so often the computer will bring up a screen that's either blue, pink or yellow with white pinstripes and I can't do anything other than pull the plug and reboot. I've never seen any computer bring up these types of screens before and I have no idea where to start to find out what's causing it. Can anyone help me with this please?

I'm also having problems with freezing while on the net using a Firefox browser. This issue resolves itself, it eventually restarts, but I can't figure out why it does it to begin with. Computers are so frustrating, grrrrrrrr!!
 

A:Blue, pink or yellow striped screen on freeze!

11 more replies
Answer Match 86.52%

About once a day, my computer restarts, and says it has recovered from a serious error. Have run antivirus, etc. Drivers seem to be updated. Can't find issue. Seems to happen most right after startup. Please help.
 

A:Windows XP Blue screen error - reboot

16 more replies
Answer Match 85.68%

Upon reboot or startup I receive an error message:
Checking file system on C:
Type of file system is NTFS
volume is dirty
CHKDSK is verifying file (stage 1 or 2)
file verification is completed.
CHKDSK is verifying indexes (stage 2 or 3)
percentage completed
CHKDSK is verifying security descriptors (stage 3 of 3)
percentage completed

I then get an opportunity to send an error message to microsoft (I wrote down the error signature if that's helpful)

This has occurred the last few times I reboot, I must confess that I have been leaving my computer on 24/7 for the past couple of weeks, since first receiving this error message. But today the silly thing required a reboot because I got the blue screen of death error message (which I did not write down) in the middle of surfing the web.

Any idea what's causing this? How can it be fixed? Any help will be appreciated. By the way, I know a little day to day computer stuff but can be walked through most anything.....just don't know a lot of technical terms and such.
Thanks!

A:Blue Screen upon startup or reboot with error message

Hello glassflute

We really need to know the blue screen error message in order to help
Please post the message such as
STOP 0x00000000A IRQL NOT LESS OR EQUAL
and any drivers named ( *****.sys)

In the meantime, back up all your files/data and run check disk yourself with the repair switch

Start/Run and type in
cmd
OK

At the prompt type
Chkdsk C: /f /r (there is a space before both of the /)
Assuming Windows is installed on "C"
Enter

Reboot and chkdsk will run again and try to repair any errors. If it finds errors this can take quite a long time.

.

4 more replies
Answer Match 85.68%

Computer has been running fine I believe an update happened because when I got home it was restarted and on the login screen which I would never leave it at and when it updates automatically that it usually the screen I see BUT I am not 100% sure that this happened. I hadn't done anything new to it for weeks either.

So, I come home today and when I turn on the beast it takes me to the 'System Recovery Options'

Which allows me to
- Startup Repair
- System Restore
- System Image Recovery
- Windows Memory Diagnostic
- Command Prompt

I tried all the options and I get this for an answer:
- Startup Repair
Startup Repair cannot repair this computer automatically
- System Restore
To use system restore, you must specify which windows installation to restore.

Restart this computer, select and operating system, and then select system restore
- System image recover
An internal error occured. The following information might helpyou resolve youre error:
The system cannot find the file specified. (0x80070002)

-
Windows cannot check for memory problems
an error is preventing Windowsfrom checking for memory problems during startup. To run the Windows Memory Diagnosis manually, book the computer from the Windows installition disc, and then slelect windows diagnostic from the Windows boot menu.

-----------------------------------

I have the windows disc i set bios to boot for cd drive but it doesn't seem to work.

The only options upon boot are
1. Launc... Read more

A:Blue screen and reboot on start up, Error 0x80070002

I was able to video my screen to see the bluescreen error message and it says 'UNMOUNTABLE_BOOT_VOLUME' hope this helps.

1 more replies
Answer Match 85.68%

Using Windows XP Professional 2002 SP 2

I made the mistake of letting someone else use my PC while I wasn't around to make sure they weren't going to do something unintelligent. Turns out, they clicked a link which forced Adobe Reader to open and install some kind of trojan. I instantly started getting random and fake "anti spyware" popups telling me I needed to buy such and such. I immediately ran malwarebytes, which found about 9 infected files, and deleted them. The popups stopped, but as soon as I rebooted I received a message, after the Windows boot up screen, but before the logon screen, that said wmiprvse.exe was not found, skipping Autocheck. I thought it was odd, but didn't think too much about it.

I noticed after that reboot that instead of the usual 4-5 svchost.exe 's that task manager picks up, I've been seeing between 7 and 8, with one or two running at a particularly high memory usage level. I thought that was odd too, but I wasn't sure what to make of it. Fast forward maybe 6 hours of normal usage, I got a sudden blue error screen for about 2 seconds, I didn't have any time to read what it said, but it forced my computer to reboot. This time, again after Windows boot up, but before the logon screen, I got an error message, but this time it said msln.exe was not found, skipping Autocheck. I've never seen either of these error messages before the virus so it's starting to get worrisome. I own up to date Norton Antiv... Read more

A:Blue error screen + random forced reboot

Worth reading, http://www.istorya.net/forums/software-and...-startup-2.htmlI would think it worth a trip to the Am I Infested forum; I will suggest that this thread be moved there.Louis

4 more replies
Answer Match 85.68%

Blue screen stop error happens randomly. When it happen the windows will reboot, then the home page will changed to a website which I never see before. I am using an NEC noteboot Versa E6000. I have uploaded the minidump. Please help me analysize it.
 

A:My winxp has blue screen stop error then reboot

Hello and welcome to Techspot.

Your minidumps are crashing with various .sys files, such as bvlgs.sys/e2emf47.sys/dj9mx7.sys etc. I can`t find any info for these files.

Your minidumps also reference rasphone.exe, as the process that was running when the crashes occured. This is the Remote Access Phonebook.
Product Name: Microsoft® Windows® Operating System.

Your minidumps crash with a bugcheck of D1.

0x000000D1: DRIVER_IRQL_NOT_LESS_OR_EQUAL

The system attempted to access pageable memory using a kernel process IRQL that was too high. The most typical cause is a bad device driver (one that uses improper addresses). It can also be caused by caused by faulty or mismatched RAM, or a damaged pagefile.

Just in case you`ve got a damaged page file do the following.

Right click my computer, and select properties, and then the advanced tab.

Under performance, click settings. Click on the advanced tab, and then on the change button.

Click on the custom size button, and click in the initial size box and make the size of the page file 0. Click in the maximum size box, and make the size of the page file 0.

Click set.

Now reboot your machine. After your system has restarted run a defrag.

Once the defrag has finished, go back to the pagefile settings above, and click on the change button. For the initial, and maximum pagefile size make it 1.5 times the ammount of ram your have. I.E if you have 512mb of ram set the page file to 768mb.

Click on t... Read more

2 more replies
Answer Match 84.84%

I've been trying to play Medieval II total war and recently my computer has been restarting when the game tries to load. This has also happened to me with Last Chaos. I scanned my drives...no problems there i think. No viruses to my knowledge...and all my drivers are up to date. Attached are the minidumps. Please help if you have any idea of whats going on.
 

A:System crash and reboot stop/blue screen error

Try using the Omega Drivers. http://www.omegadrivers.net/ati_winxp.php

Blaming the CCC. http://www.techspot.com/vb/topic113038.html

BugCheck 1000008E, {c000001d, e50af7c0, a74dc88c, 0}
Probably caused by : ati3duag.dll ( ati3duag+11a5c8 )
 

2 more replies
Answer Match 84.84%

Hello,

I am having some problems, when I start my computer, I get the following blue screen and reboot afterwards

"STOP C000021a (fatal system error)
The windows logon process system process terminated unexpectedly with a status of Oxc0000005 (ox00000000 ox00000000)
The system has been shut down."

I have to start in security mode, and do a system restore, then the computer works allright for a while but after 2 or 3 boots, the error returns.

I found this thread with a problem very similar to mine, however I tried following some of the steps (passing the vundo fix, the ewido anti-spyware, etc) in order to solve this up but I had no luck... =(

http://forums.techguy.org/malware-r...88401-solved-winlogon-exe-crashing-fatal.html

Can someone help me out?

Below I am pasting the HiJack this log file

Thanks! =)

=========================================================

Logfile of HijackThis v1.99.1
Scan saved at 18:19:35, on 15/10/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\PROGRA~1\GbPlugin\GbpSv.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Common Files\Nero\Nero BackItUp 4\NBService... Read more

A:Winlogon.exe crash! Fatal error blue screen and reboot afterwards!

Anyone? I'm pretty much desperate here... =(

Tried anything I could but still no luck...

VundoFix does not find anything as well

Please help!
 

2 more replies
Answer Match 84.84%

Whenever playing games it usually crash right when it starts, though not at the menu. The game this keeps happening on is Football Manager 2010. Has only just started happening i have had the game over a week and havent had a problem. I know that my laptop does struggle to run it but has worked prior to this fine.

Quickly quits out on the game then a blue screen comes up but before you can read anything it restarts. Then when logging back on gives you the message saying The system has recovered from a serious error, send error report or dont send.

Im not the best on computer but have gained this information.


Quote:




C:\DOCUME~1\James\LOCALS~1\Temp\WER3560.dir00\Mini111709-03.dmp
C:\DOCUME~1\James\LOCALS~1\Temp\WER3560.dir00\sysdata.xml

BCCode : 10000050 BCP1 : E2827004 BCP2 : 00000001 BCP3 : F60C594E
BCP4 : 00000001 OSVer : 5_1_2600 SP : 3_0 Product : 256_1




Thanks in advance for trying to help

If any other information I will try my best to find it

A:Reboot and blue screen error [moved from Vista/ Windows 7]

Hi pleas follow the instructions here
http://www.techsupportforum.com/1871981-post2.html and attach to your next post

10 more replies
Answer Match 84.42%

Hello everyone,I have used this site a few times in the past and have had very positive experiences curing my pc of viruses. Since 27/12/09 my internet has been connecting and disconnecting intermittently but that is for another forum.The info that I get is:Problem signature: Problem Event Name: BlueScreen OS Version: 6.0.6002.2.2.0.768.3 Locale ID: 4105Additional information about the problem: BCCode: 50 BCP1: 81F49BF8 BCP2: 00000000 BCP3: 82D5966B BCP4: 00000000 OS Version: 6_0_6002 Service Pack: 2_0 Product: 768_1Files that help describe the problem: C:\Windows\Minidump\Mini010610-01.dmp C:\Users\Owner\AppData\Local\Temp\WER-41652-0.sysdata.xml C:\Users\Owner\AppData\Local\Temp\WER41DF.tmp.version.txtRead our privacy statement: http://go.microsoft.com/fwlink/?linkid=501...mp;clcid=0x0409The blue screen pops up occasionally when the computer is restarted or turned on after bootup. All I have is a recovery disc 1 and 2 for vista since it was preinstalled so I do not have a repair disk that I could use. If you need any more info please let me know.

A:blue screen with ACPI.SYS warning

Hello everyone,I have used this site a few times in the past and have had very positive experiences curing my pc of viruses. Since 27/12/09 my internet has been connecting and disconnecting intermittently but that is for another forum.The info that I get is:Problem signature: Problem Event Name: BlueScreen OS Version: 6.0.6002.2.2.0.768.3 Locale ID: 4105Additional information about the problem: BCCode: 50 BCP1: 81F49BF8 BCP2: 00000000 BCP3: 82D5966B BCP4: 00000000 OS Version: 6_0_6002 Service Pack: 2_0 Product: 768_1Files that help describe the problem: C:\Windows\Minidump\Mini010610-01.dmp C:\Users\Owner\AppData\Local\Temp\WER-41652-0.sysdata.xml C:\Users\Owner\AppData\Local\Temp\WER41DF.tmp.version.txtRead our privacy statement: http://go.microsoft.com/fwlink/?linkid=501...mp;clcid=0x0409The blue screen pops up occasionally when the computer is restarted or turned on after bootup. All I have is a recovery disc 1 and 2 for vista since it was preinstalled so I do not have a repair disk that I could use. If you need any more info please let me know.I would like to see these minidumps. To better help me please do this:1 > create a new folder on the desktop and call it "dumpcheck" or whatever you like2 > navigate to %systemroot%\minidump and copy the last few minidump files to that folder.%systemroot% is normally c:\windows. They are numbered by date. You can pa... Read more

9 more replies
Answer Match 84%

Hey guys,

Ok so I redid the post as it all came out quite unclear and blurry.

Screen turns either black, grey or whatever color is closest to the program I was running in stripes as the image in my own reply shows.

Occationally my screen flickers but runs for a bit longer but it seems to be a sign of the system crashing.

The screen flickers occationally during bootup and sometimes causes my computer to run with the screen inactive. When the system crashes I often get a message showing the OC had failed when I am running default settings and sometimes I get an error loading OS which seems peculiar as I've had no issues with my harddrives on earlier occations untill now when I replaced my video card and RAM memory.

Speccs:
New card: ASUS adeon EAH5870 v2
Mainboard: ASUS P5P43TD(775-socket Intel Dualcore CPU running 3.16GHz)
New RAM: Corsair 16GB DDR3 1333MHz
OS: Newly installed Windows 7 64-bit

Both BSOD error logs are in a zipped folder in the first post.
 

A:Grey Screen, striped screen or pixelated screen

Bump with content ok so I managed to boot my system in safe mode and I'm going to add the .dmp file and the .xml file from the error log which for once confirmed a bluescreen(See picture for the "blue" screen)
Also the system nearly every time after crashing claims I have OC'd the system when I was running default settings except for setting the HDD with my OS first.

I've added both logs in the zipped folder attached, couldnt upload them as they were due to file format.
 

2 more replies
Answer Match 83.16%

If you happened to read my previous post I received an old but seemily stable Toshiba Tecra S1. I have done some upgrading such as SP2, anti-virus, etc. Plus I have installed Office 2003 and it works fine. All connections including USB ports are in working order as is the DVD/CD-RW drive.

I was using this laptop over the weekend at a friend's house and one time I walked away and when I came back I had an 0x7E error. There has been no BSODs prior to this occurance. I wasn't able to read the minidump until I got home and it pointed to the ACPI.sys.

After researching it could be caused by:

1. Overheating (which was my first guess) as the driver attempts to throttle back the cpu because of heat.

2. Harddrive failing.

3. Driver controllers failing on the motherboard

* I have never had this error before and I was wondering what I can do to determine the exact cause. I have very little knowledge about laptops.

* Also, I have been wanting to diagnose the harddrive fitness since I have gotten it. Toshiba does not provide their own utility but suggests Hitachi's offering. So I burned an ISO disk with no errors but when I go to use the disk I keep getting a search error. Thw windows closes so fast I can't read what else it says.

Thanks.
 

A:Toshiba Tecra S1: ACPI.sys Blue Screen

Hi Route

Since you'll know what the Error Code means I don't have to list that like on other posts and you'll know that the ACPI.sys file is the Windows Power Management File if this is mentioned in all MiniDumps then I believe it is very much Hardware Related.

When testing my Laptop HDD I tried a few Different Tests even though I had Hitachi before that HDD died, I used the WD Test that is pretty good, I tried about 3 but can't remember the other I used after this I built up a Picture and worked out that it was my HDD that had gone.

I think Speedfan has a SMART HDD test built into the Program which seems pretty reliable as well, I found it shows Results that near as makes no Difference are the same as other SMART Tests you could have ago with that as well.

Have you been Monitoring your Temps?

If so could you post them, I have a Good Range set for Laptop Temps having seen Quite a Few.

Oh and Also did you get the New HDD or have you left it for now?
 

5 more replies
Answer Match 83.16%

I realize i am using an old mobo, but when I first installed a new copy of Windows 7 Home Premium and had no problems.

now... it will show the windows startup screen then stop and go to a blue screen that says that my system is "not ACPI compliant".

If i push the reset button on my case, the same thing happens. But if i turn off my power supply then turn it back on and boot, everything is fine.

Not sure if this has anything to do with it, but around the time it started doing this I was having trouble installing flash player and had to disable my norton 360 in order to get it to install.

Since it is fine after a power supply shut down, it makes me think that it is not doing something properly during shutdown.....

Has anyone encountered this problem or know a fix?

A:Not ACPI Compliant? blue screen mystery

This sounds like a bios problem to me. Have been to your motherboards site and tried to obtain a new bios for you PC ?

Have a read here first on how to do it and then follow the link at the bottom to your bios make sure you choose the correct one.


Desktop Boards — BIOS update instructions



Steve

5 more replies
Answer Match 82.74%

I've got a problem that, if fixed, would by-pass other problems.

I got a virus on one of my Dell Dimensions (E521) and figured I would simply just reformat the hard drive and do a clean install of Windows XP. I backed up all my information, put the hard drive in my second PC (E520) and reformatted the hard drive.

So I ended up getting Windows XP installed on this newly reformatted hard drive by using my second computer (E520) to reformat then install using the Dell operating system disk.

I put the hard drive back into the first computer (E521) where it came from and I get this blue screen error with "Stop: 0x0000007B" I know that this means there are a lot of different things that could be going wrong, but it is mostly due to the computer not being able to load the OS from the hard drive. Thanks to http://pcsupport.about.com/od/findbyerrormessage/a/stop0x0000007b.htm.

This is a big problem, but the bigger problem is my USB keyboard is not being recognized at start up on the first PC (E521) meaning I can't get into bios or do anything really since when the hard drive tries to load it gets this blue screen error.

I've tried updating my bios by making a bootable bios update disc and forcing my computer to start from disc by unplugging my hard drive, but it wouldn't work because I needed a keyboard to start the bios update from the disk in the dos prompt. - If there's a way to make the update start automatically it may update the bios, f... Read more

A:Blue Screen Error and Bios problem

9 more replies
Answer Match 82.74%

I have had a bios error on my brand new Inspiron 1420 laptop twice now--causing a blue screen.

Unfortuantely, both times my computer has restarted too quickly for me to read the entire screen. I just know I saw the word "bios."

Should I update something? If so, what? Is there any way to retrieve what my error said?

The blue screen happened when I was doing several things--chatting on AIM, unzipping music files on my computer, and running iTunes with firefox open.

Any help is appreciated!

Edited to add:
I found this info on my computer--
Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033

Files that help describe the problem (some files may no longer be available)
Mini082708-01.dmp
sysdata.xml
Version.txt

View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Extra information about the problem
BCCode: 1000007e
BCP1: C0000005
BCP2: 8B69E5E3
BCP3: 8C183A64
BCP4: 8C183760
OS Version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Server information: 04504cea-3865-4f15-a924-5db075b6f056
 

A:Blue Screen Error-Bios Update?

16 more replies
Answer Match 82.74%

Hi everyone,

I've had voltage issues causing my computer to freeze or reboot during games and dvds. Fixed that and the computer was fine after memtest showing no problems. That was late Dec.

A few days ago, the computer would go to a blue screen saying it's dumping physical memory and then automatically reboots. Thinking my harddisk might be collapsing on me (I have a seagate barracuda 7200.11 500Gb HD with the SD15 firmware, the infamous crash friendly HD), I flash the HD with the SD1A firmware from seagate, then it was fine. 2days later, Catalyst started to cause problems by not responding, so I formated the drive and reinstalled vista ultimate, along with Catalyst, drivers from Mobo manufacturer ASUS, plus a couple of other softwares. That was yesterday, and now I'm getting the same blue screen back, or the computer just freezes.

Does anybody know what's wrong. It's happened a few times so I'm a bit worried.

A:screen freeze or blue screen needing reboot

What is the blue screen code.

9 more replies
Answer Match 81.9%

Last weekend I had 1 BSOD after another. I thought my system was crashing. I have removed and reinstalled my video adapter and the Intel chipset. The blue screen and error come up when I am watching a TV show on the computer (USA Network; NBC; FOX; etc) and I watch the full episodes of whatever show i might be watching. The shows will go ok for a while, then it hangs up. Some times the only way I can continue and see the entire show, is if I close down and restart, after eliminating all cookies, files, and history cache. The Windows Error Code is: BCCode 10000071; the details are: 0X000000BE; 0XC0000005; OX804D82BB; 0XEDAC2B58; and )X00000000. I searched and searched Microsofts Error Code Site, but could not find this Error Code. The only thing I learned from all that searching was that my problem involved the Video Adapter. The suggestions Windows makes from the error screen are: 1) Disable Driver identified in stop error message; 2) Check for driver update; 3) Try changing the Video Adapter; 4) Check with eMachines for BIOS Updates; and 5) Disable BIOS Memory Options such as Caching or Shadowing. I have done everything except the last one. I have located the BIOS for my computer BUT AM AFRAID TO DO ANYTHING WITH IT. [note: the BIOS which eMachines' site has for the T2882, is not Update BIOS but just the BIOS which originally came with the eMachines T2882]. I did make some adjustments to my Virtual Memory Paging settings: I decided to let "Windows System Set" ... Read more

More replies
Answer Match 81.06%

Hi AGAIN!!

Hopefully my PC will STAY up while I write this .. I have been having some MAJOR probs with the puter just flippin well going to a black(blank) screen .. and then to a deep blue screen .. which displays this jibberish to me ...
Shew .. just had black screen followed by the bright blue screen with the following written on it.

*** STOP: OxOOOOOOD1 (OxE3C83040, OxOOOOOOFF, OxOOOOOOO1, OxBF872BCA)

DRIVER_IRQL_NOT_LESS_OR_EQUAL

*** ADDRESS BF872BCA base at BF872000, Datestamp 41ef5ce 1 - mrxsmb.sys

Beginning dump of physical memory
About a year ago I had the same thing happen .. and .. at the end of the word 'memory' an actual countdown occurred.

As well .. I am being INNUNDATED with this ...
Inside an ALERT BOX named WinRAR self-extracting archive

Extracting ribiva.exe
Extracting ewaf.exe
Cannot create ewaf.exe
Installation progress (the installation bar goes about 3/4 of the way and no further)

=======================================================
The Virus alert reads ..

Obj.name rivia.exe

Container C:\DocumentsandSE..\difavipu.exe

Virus name Backdoor.ranky

Action taken action to the file was denied
I have had this machine IN for repair twice in 2 weeks .. all they have done is clean up viruses and spyware .. and I am totally NOT wanting to haul it back !!!

Any suggestions gratefully accepted .. and WOO HOO I have not gone BLANK & BLUE !! (yet)

Marilynne
 

A:BLACK screen/BLUE screen .. Reboot ??

my suggestion.... buy an antivirus like norton or mcafee and run it on your system ALL the time. Keep it updated on a weekly to daily basis and this is less likely to happen ever again.
 

1 more replies
Answer Match 80.64%

Alright, so i was browsing on my comp as i usually do, when i got the frozen, striped pixelated screen, as i mentioned in the title. Unable to do anything, i shut it down manually holding down the power button. Upon reboot, i got the same thing at the welcome screen for vista. At first i thought this may have been caused by a recent update, so went in safe mode, and I did a system restore. Didn't solve it. I have fedora installed on this comp, and in that i have no problems. windows safe mode is fine as well. This led me to think i had a software problem. perhaps i needed to update the driver for my graphics card. I tried this via device manager, but it claimed it was up to date. Went to Nvidia's website, downloaded the latest one anyway. applied it. still not solved. anyone know what the problem is?

OS: windows vista home premium 64 bit Service pack 2 build 6002
Graphics card: Nvidia Geoforce 9800 GT driver version 7.15.11.7556

A:frozen, striped, pixelated screen on welcome screen.

I should also mention, it's an HP Pavilion FT863AV-ABA d5100t

4 more replies
Answer Match 80.22%

Hello,
Ive had great help here in the past so thank you!  now I have another problem.
 
Ive been getting a blue screen of death error "a problem has been detected and windows has been shut down to prevent damage to your computer"
 
 0x0000001e (0xffffffffc0000005, 0xfffffa80008d31610, 0x000007fffffa800)
 
It happens on a normal start up and in safe mode with networking.
 
I can get into normal safemode no problem.  Ive run a macafee virus scan, spybot and malwarebtyes scan which all come back clean..  However macafee wont let me turn on the background scan or firewall, so I think I might have somthing hiding.  I have also done a system restore to back to monday.
 
When I boot normal I can get in all the way to the desktop and an error pop up comes up just before the blue screen.  It says
 
"There was a problem starting C:\Users\Kittle\AppData\Roaming\udoate.dll  The specified module could not be found" then goes to blue
 
Another note that may be helpful was that I get a driver error for my wacom tablet.  Removed the driver and still get the error.
 
Im running windows 7
 
Any help is Appreciated!! thanks in andvance.
 
 

A:Blue Screen of Death. BIOs error 0x0000001E Infection? or somthing else

Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result. Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop.* Double-click mbam-setup.exe and follow the prompts to install the program.* At the end, be sure a checkmark is placed next to Update Malwarebytes' Ant... Read more

11 more replies
Answer Match 80.22%

Hello everyone. I'm new the the forums here (as in just registered), but I need some help please. Basically after attempting to open firefox today (as I have probably over 20 times a day for the last year at least), I received a blue screen of death, and now my computer seems to be shot. I know how difficult it is to diagnose something without being able to see it, so I made a short little 4 min video of me trying to turn it on and what it does. Hopefully this has happened to at least someone before.

Blue Screen of Death - YouTube

A:[SOLVED] BSOD help. Blank screen after BIOS pop up and blue screen while trying to re

Hi,

From the video you provided (which is great, by the way)... your system is failing to POST. Essentially if the system detects that a device or component is failing to provide the accurate information, which ensures that it would then be safe to run, the system will not POST.

From the looks of it, your hard drive or memory appears to be the issue which is the issue in most of the cases like this as you're BSOD'ing right after loading the Windows disc and after it loads the files necessary for the install.

My current advice:

1. Clear / reset the CMOS and try booting up and or loading the disc again.

2. If possible using another system, possibly a laptop... etc, download and run Memtest86+ -

Memtest86+:


Quote:




Download Memtest86+ here:





Quote:





http://www.memtest.org/

Which should I download?

You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).

How Memtest works:

Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.

The default pass does 9 different tests, varying in access patterns ... Read more

3 more replies
Answer Match 79.38%

I put my computer in a local pc shop just to get cleaned and he put more memory in, but when i brought it home it starts up with a blue screen saying stop oxooooooa5 and also updated bios not acpi compliant. i tried to update bios from my help menu on my pc but it doesn't seem to have worked. i am new at computers and i don't want to make it worse, i was wondering if there was an easy way to fix this i am not sure what the shop has done to my pc. any help will be appreciated.
 

A:HELP! my computer has blue screen error oxooooooa5 updated bios not acpt compliant

I would take it back to the shop and ask for a refund of your money.

They had to know it was not working when it left their shop, after all that Is their job, so unethical.

.
 

1 more replies
Answer Match 79.38%

I read the posting instructions but it's a little difficult for me to run that program because my computer won't actually display anything. But here's what I can answer:

OS - Win 7 64bit

Original OS - Vista Home Premium October 2010

OS is retail upgrade

Hard Drive has been in use since October 2010, everything else is less than 48 hours old.

I haven't reinstalled the OS

CPU - Intel Core i7 2600k

Videocard - BFG nVidia GeFroce GTX280 1GB

MoBo - ASUS P8 H61-M

PSU - Corsair GS600 600 W (48A on 12v if that's relevant)

Corsair 8GB DDR3 1333MHz RAM (2x4GB)

Don't know about system manufacturer, they're different parts. The Case is by NZXT and the 1.0 TB HDD is by Seagate.

This is going to be a bit of a long read so I'll start off by giving the short version of all this.

Here's the short version:

I built this PC yesterday and it was working but couldn't 't display the native (1920 x 1080) resolution. I got "Out of Range" error on my monitor when I tried to change it to any other resolution. I installed an nVidia control program and made a custom resolution of 1920 x 1080. About half an hour later, I got a blue screen. Now when I start it up I just get a black screen, no error messages, just a black screen. It isn't just my own monitor, I've tried it with another fully functioning one too.
And more detail here:

It was all working alright when I first set it up but I couldn't get native resolution for my LG W2240 monitor (1920 x 1080) which displaye... Read more

A:Black screen after Blue Screen, no BIOS, no display

Can you boot into Safe Mode?
Does the system display the Asus splash screen before going to the black screen?

Have you checked to see if the video card has power (the extra power plugs in most cards these days)? Have you checked to make sure the fan is working, and that the video cooler isn't clogged up?

Have you tried another video card? I'd suspect that the video card or it's drivers are your issue. If the system boots into Safe Mode, then I'd suspect the drivers, if it doesn't boot into Safe Mode (so you can see the display) - then I'd have to assume that it's the video card.

See if you can return the video card. If not, then see if you can borrow one from another computer - or buy one that you can return if it's not needed.

Good luck!

1 more replies
Answer Match 79.38%

Hi,

CPU: Intel Core2 QUAD 9300
Motherboard: AsRock x48 TurboTwins
Ram: DDR2 2x 2GB, 800 GHz, brand Hynix
GPU: ATI HD 5770
PSU: Corsair 650 W
OS: Windows 7
Custom build

I installed Civilization 5 (and directX 9 as well because I was asked to during the installation). After few minutes of being in the game a blue screen popped up (I do not know what message was on there). I restarted the computer and system recommended to run the fix mode. I launched it and after a while I was advised to bring the settings back to the restore point. I acknowledged this but then all I saw was a black screen. Since then, after each restart the screen goes black. If I manage to go to BIOS after 5-10 seconds the screen goes black. I cannot even reinstall Windows.

Those 5-10 seconds in BIOS are enough to check the temperatures on CPU and MB: they are around 30 degrees Celsius so overheating is not the problem. I connected the monitor with my laptop and it works, so monitor is fine. There are no loose connections. There is no dust and debris - this system is 2 months old.

Problem might be in the graphics card. Several weeks ago the screen used to go grey after playing Fallout 3 for 10-15 minutes. I disabled the audio on the card and that solved the problem. However, Windows still indicated that there is something wrong with the GPU; on the other hand, drivers were up-to-date.

Can anyone help please? Or let me know what you think might be wrong.

Thanks.
 

A:The screen goes black after previous blue screen (even in BIOS)

Since you are having a graphics issue in both the BIOS startup screen and while Windows is open, it does sound like a graphics card problem and not a driver problem. Do you have another graphics card to substitute for test purposes?
 

2 more replies
Answer Match 78.54%

Hi. I have recently had a virus on my pc that malwarebites found. After trying to remove it I gave up and phoned dell to get my pc reset to factory settings. After doing so I have been getting these crashes when playing hi res games such as CoD. First of all my fps drops very low. Then the game becomes VERY laggy. Then after that it crashes and I get a blue screen saying something like.

Windows has shut down to prevent damage, error detected in windows framework.

Upon rebooting I open up Event viewer and always see this message.

A timeout (30000 milliseconds) was reached while waiting for a transaction response from the SftService service

If anyone could help me I would really appreciate it as it was an expensive PC and I really dont want to have to send it back to dell.

Cheers - Fazzz

*Edit* I have uploaded some pics of my cpu spec
 

A:Dell XPS800 crashes with blue screen and BIOS error when playing CoD4 (any hi -res game)

Did you re-install all the Windows Updates after doing the factory restore? Are there any yellow exclamation points in the device manager?
 

11 more replies
Answer Match 77.7%

I am running Windows XP on an Nspire laptop purchased just a few months back. I installed Ad Aware, Spybot Search & Destroy, Spyblaster, Zone Alarm, and Windows Defender in addition to the Verizon Security Suite that was currently running in order to find and delete some adware viruses. Spybot was successful and everything was restored to normal for a couple of days until I restarted and got a blue screen error "IRQL_NOT_LESS_OR_EQUAL" and stating that I should disable BIOS memory options. I assumed that I had too many virus scanning programs and firewalls installed so I was able to boot into safe mode as administrator and deleted all of the before mentioned programs except for Windows Defender and Verizon Security Suite which I planned to keep. At restart I received the same blue screen message so I went to the BIOS setup menu to check the memory options and my BIOS menu has extremely limited settings options (Phoenix Trusted Core) which frustrated me and I (stupidly) reset the default settings. Now I was unable to get past the black screen telling me that Windows failed to start normally. So I went to the XP recovery CD and tried recovery and now all I get is a blue screen saying hard drive not found.
This laptop was purchased "Vista ready" but with XP Pro installed by my request. Could the problem possibly be that XP setup is not recognizing the hard drive because I reset the settings to default and now the hard drive is recognizable by Vista but n... Read more

A:Solved: Changed BIOS settings to default, blue error screen, hard drive not found

16 more replies
Answer Match 77.7%

Gest a Blue Screen no message.....no error nothing comes up just a Blue blank screen

A:Gest a Blue Screen no message.....no error nothing comes up just a Blue blank screen

more info please. we need more info before we can help you out. system specs, what is the error message? etc.etc.

2 more replies
Answer Match 76.02%

Last night my PC froze while i was watching a dvd.

Now, when I power up, it shows the ASUS screen then immediately reboots, it carries on doing this till I switch it off.

I can get into BIOS ok if I'm fast enough but all looks ok in there. I can also get to the boot mode screen and select safe mode but with the same results.

So far I tried removing my 3 memory sticks and trying them one by one (same results). Am I correct in thinking this is a hardware fault? possibly the graphics card, sound card or even (god forbid) the hard drive. Or is there any chance something nasty has got into Windows?

All fans appear to be running ok.

What would be the next steps in the fault finding procedure?
 

A:PC reboot after BIOS screen

Ok, moved on a step. Managed to boot from my windows xp CD and get into recovery panel (repair panel or whatever it's called)

chkdsk reports one or more unrecoverable problems with my c drive. It checks out my second hard drive ok.

Am I right in thinking this is almost certainly a drive failure? I'm tempted to try it on my wifes PC as a second drive to check if anything's recoverable but I'm concerned in case it's actually something nasty on it that may get transferred across.

Any thoughts?
 

2 more replies
Answer Match 76.02%

Last night my PC froze while i was watching a dvd.

Now, when I power up, it shows the ASUS screen then immediately reboots, it carries on doing this till I switch it off.

I can get into BIOS ok if I'm fast enough but all looks ok in there. I can also get to the boot mode screen and select safe mode but with the same results.

So far I tried removing my 3 memory sticks and trying them one by one (same results). Am I correct in thinking this is a hardware fault? possibly the graphics card, sound card or even (god forbid) the hard drive. Or is there any chance something nasty has got into Windows?

All fans appear to be running ok.

What would be the next steps in the fault finding procedure?
 

A:PC reboot after BIOS screen

Ok, moved on a step. Managed to boot from my windows xp CD and get into recovery panel (repair panel or whatever it's called)

chkdsk reports one or more unrecoverable problems with my c drive. It checks out my second hard drive ok.

Am I right in thinking this is almost certainly a drive failure? I'm tempted to try it on my wifes PC as a second drive to check if anything's recoverable but I'm concerned in case it's actually something nasty on it that may get transferred across.

Any thoughts?
 

2 more replies
Answer Match 75.6%

While using my laptop, usually when trying to open some "windows" application such as task manager, wireless networks, documents, media player, windows updater etc. my laptop freezes or doesn't allow me to click on anything except the minus button on all my windows and the start button. I'll try to shut the laptop down, but it freezes once again on the logging off screen and I'm forced to manually shut it down by holding the power button. When I turn my laptop back on, I get the black screen that says windows shut down unexpectedly how would you like the start blah blah blah, and when I get my laptop turned on again, I get this error message:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8004F41E30
BCP3: FFFFF80000B9C3D8
BCP4: FFFFFA800F59FC50
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\030813-8580-01.dmp
C:\Users\Alissa\AppData\Local\Temp\WER-31668-0.sysdata.xml

After doing some searching online, it said that it was probably a compatibility issue, and I found that intel control center was incompatible (I'm not sure if that was the only program, I'm not great with computers and am not sure how to search through EVERY program), so I uninstalled it. I tried reinstalling it, but it simply wouldn't install and it ... Read more

A:Blue Screen Error but no actual blue screen pops up

please follow the Blue Screen of Death (BSOD) Posting Instructions

9 more replies
Answer Match 75.18%

My Toshiba laptop has a faint brown vertical stripe 1 1/2 ins wide and 1 1/2 ins from the left hand side of the screen. I have recalibrated the screen using color plus. but to no avail. Any thoughts.

Regards

Pete
 

More replies
Answer Match 75.18%

Hi!

I get a striped screen very often. It seems to come randomly.
My workaround when it happens is to shift source (Fn+F5?) and the shift back and then it goes back to normal.
Have tried to update drivers. No warranty left.
Any help would be very appreciated.

Thanks in advance.
/Erik

A:Striped screen XPS 15z

The question to answer:  if you attach an external screen, does it show the same fault?  If so, the video chip is going bad and the mainboard will need to be replaced.
If not, first thing to try is replacing the video wiring harness inside the system.  If that doesn't solve the problem, replace the display panel.

1 more replies
Answer Match 75.18%

Hi lads.I use Vista SP1 and sometimes in a process,or sometimes when started I had striped static colourfull screen.Diagnostic shows everythings is OK.Where is a problem?

A:Striped screen

hi possibly a graphics driver update

2 more replies
Answer Match 75.18%

Hi,  My P70 has had a blackscreen with the fans on and power light on. I do believe that the BIOS is dead after I pulled the plug on it updating the BIOS when it black screened during the update restart.  Draining the battery to reboot the BIOS hasn't worked. I read on a forum that depending on the motherboard, the BIOS can be rebooted by a dual BIOS, or by a BIOS USB/CD file.  Where can I download bios from a USB?  The biggest problem that needs to be solved is how to overcome the fact that the CPU doesn't boot and therefore I can't enter the motherboard BIOS.  Any ideas?   

More replies
Answer Match 74.76%

I recently reinstalled a fresh copy of Windows 7 Professional (64bit) and the computer runs fine until I shutdown and try to start up (not restart most of the time)

This is the log file I get when the computer actually does start up.



------------



Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8005345038
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\101610-27440-01.dmp
C:\Users\Aversion\AppData\Local\Temp\WER-34991-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


---------------



Anyone know what this can be? The microsoft links didnt help to much.

A:Blue Screen after reboot.

See these instructions: http://www.sevenforums.com/crashes-d...tructions.html

1 more replies
Answer Match 74.76%

Hello,

Windows 7 Home Premium 64 bit recently crashed and I received the "Blue Screen". I have tried to run in safe mode, run diagnostics, and boot windows from disk and all fail. The process stops, the computer reboots, and back to the blue screen.

It is giving a stop code: 0x0000007E along with 0xFFFFFFFFC0000005, 0xFFFFF800001FB07A, 0xFFFFFF880027CD82, 0xFFFFF880007CD080)

http://s1181.photobucket.com/albums/x431/chi1ddd/?action=view&current=BlueScreen.jpg

DDD

A:Blue Screen - Can't reboot

Hello,Have you also tried Last Known Good Configuration ?Power on the computer and start tapping the F8 key to bring up the Advanced Options Menu.Arrow down to Last Known Good Configuration and press <Enter>. Reboot.

3 more replies
Answer Match 74.76%

Everyday when booting up my computer within 5 minutes I get the dreaded blue screen and it perfroms a minidump..restarts and runs fine all day. I have gotten several warnings on the blue screen once it said... corrupt driver another says Driver_IRQL_NOT_LESS_OR_EQUAL and sometimes it says check new hardware or software. I notice on bootup it also says Media Failure..check cable. My computer repair place says he doesnt know what the issue is but since it runs fine after reboot doesnt seem concerned. I get a serious error alert each time it reboots and while it runs good all day...its annoyiong to have it happen daily! I am not very computer literate on finding or fixing serious things..but any help or ideas sure would be appreciated.
 

A:Reboot and Blue Screen

11 more replies
Answer Match 74.76%

Hi guys. I've resently put a new computer together and I'm getting Blue screen errors then reboot. I have a hunch that it could possibly be my sound card (Creative Sound Blaster Audigy2) as this has only been happening after I put it in. When it happens the computer freezes and then there is a high piched tone coming from the speakers, then blue screen, with physical memory dump and all that good stuff.

The sound card is not new and I had it in my old computer. In that computer before I had some compatability issues with my dialup modem and soundcard, and when I was online and playing music or something the sound card would make that same high pitched tone, only my computer didn't freeze, just the audio. After I got broadband that no longer happened.

Now, when the freezes happen (3 times so far) I have had audio playing, either iTunes or a video or something.

I don't know if it will help but here are the dialogues I got after the reboots:

A:Blue Screen / reboot

Please have a look at STOP: 0x0000009C (0x00000004, 0x00000000, 0xb2000000, 0x00020151)
This is an error that can relate to various hardware-induced problems.
Since a minidump file was created, you might want to have a look into it, to obtain additional information.
Also, disabling the auto-restart will help you face the BSOD and record the exact message posted.
Finally, since you're suspecting your audio: getting hold of another sound card (or taking it out altogether and enabling the onboard audio in case your mobo has it), may give you useful troubleshooting hints for nailing the culprit.

6 more replies
Answer Match 74.76%

When I start my computer I get the dreaded blue screen and then it reboots. I tried a system restore to no avail. Please help...

Cheers

A:Blue screen and reboot

Tried Safe Mode?

27 more replies
Answer Match 74.76%

Hey guys,

Last week my pc worked absolutely fine and booted up without any problems. I haven't used it for 5 days and today when I tried to boot it up it didn't work. I got to the windows loading screen and once loaded it flickered a blue screen but it doesnt stay up long enough to read the error message. Then it reboots.

For a few weeks now ive got this message when booting up but the pc still worked.

PXE E61 Media Test Failure : Check Cable

Would this have anything to do with it? If not, any ideas?

Thanks, Danny.

A:Blue Screen & Reboot

on trying to boot it can't find the hard drive. can you see if you can get in to BIOS? On my laptop the key to press is F2, it may be a different key for yours. If so see if the hard drive is recognised there. CD and hard drive should be 1st and 2nd in list. If this is the case, and you see an option for network boot, disable this option and try to boot again. Also, another thing to try: you don't say whether this is a laptop or desktop: if a laptop, after removing power cable and battery can you reseat the hard drive. If a desktop, after removing all power, remove and replace the cables that plug in to the drive. Can you post back when you have done all this and report what happened, if nothing has worked so far can you post the details of your pc.

4 more replies
Answer Match 74.76%

Hey guys,

Last week my pc worked absolutely fine and booted up without any problems. I haven't used it for 5 days and today when I tried to boot it up it didn't work. I got to the windows loading screen and once loaded it flickered a blue screen but it doesnt stay up long enough to read the error message. Then it reboots.

For a few weeks now ive got this message when booting up but the pc still worked.

PXE E61 Media Test Failure : Check Cable

Would this have anything to do with it? If not, any ideas?

Thanks, Danny.
 

A:Blue Screen & Reboot

Also,

After unplugging the HDD and reconnecting I get a no IDE Master Detected. Hm guessing my HDD could of gone. I have a slave installed also, is it possible to install windows onto that and use it as the master?
 

2 more replies
Answer Match 74.76%

My computer was acting up. It would give me the blue screen and lock up. The computer had been used for a while so i decided to replace most of it. I bought a new Asus M4A785-M motherboard, AMD Phenom X4 9750 2.4Ghz chip, new hard drive, and a new 650 watt power supply.

After installing these components I did a clean install of windows XP. Now i am getting the blue screen and the computer re-boots in an endless cycle. I cycled out my ram and that did not help. I tried 2 different wireless usb cards. One a Belkin and the other a Linksys. This did not resolve anything. Besides XP the wireless utilities are the only thing i installed. WTF could be wrong...i am at my wits end and i NEEEED this computer because i run ACAD on it and its how i make my living. HELP.
 

More replies
Answer Match 74.76%

every so often when I am running apps, my PC shuts down to a blue screen with text on it that only flashes for a quick second then my PC reboots.
upon startup after rebooting, i get a message from windows saying that it has recovered from a serious problem, asking me if i want to send an error report or not. any ideas as to what might be causing this problem, I ran a mem test with memtest 86 and no errors were found I also wiped the drive and did a fresh install, still got the problem today. What the heck is causing this.....help, help, help..
 

A:Blue screen to reboot

6 more replies
Answer Match 74.76%

Hello, was hoping someone could shine some light in helping me troubleshoot my problem. For awhile some programs would crash randomly, and sometimes some programs wouldn't even run. So I decided to do a full reinstall, and this is where the problem starts happening. First let me list the basics.

Current Setup:
Win 8.1 (I have to use the phone# to call and activate because Key is active in another PC)
SSD Samsung EVO 850 (120gb)
HDD 1tb WD10EZEX
Asus H97i-Plus
Intel i5-4690
Corsair h100i
Gskil F3-12800CL10D (x2 8gb for 16gb)

Problem:
I'm able to do a fresh install of win8.1 onto both HD (of course not done at same time). I'm able to install the proper Chipset/LAN driver and it runs just fine, windows activates etc. However, the problem occurs when I install any other update afterwards, whether it's done via Windows Update or I manually update say RealTek audio drivers. After I install the update/drivers it just boots into a blue screen. I am however able to 'restore' from the fresh install saved point. Anyone know if this is a hardware or software issue? I was leaning towards possibly a mobo...
 

A:Blue Screen after reboot

Meant to say both SSD and HDD
 

1 more replies
Answer Match 74.76%

I am having this Blue Screen and then Reboot problem, started last night...xp pro...
computer boots but when it gets to the window loading screen I see a "very quick bsod" and then it reboots again..not able to load in safe mode...noting responsive there. I saw a previous thread on this but nothing about what the resolve was...
Thanks for any suggestions.
 

More replies
Answer Match 74.76%

Hello, i think i finally got the right info to make a topic . My friend is getting blue screen of death and has a few viruses. I couldn't open DDS so i used RSIT. None of the virus scanners i tried worked, including anti malkware and spyware programs.Thanks for any help!RSIT logLogfile of random's system information tool 1.06 (written by random/random)Run by Ellie at 2009-06-13 21:33:57Microsoft Windows XP Professional Service Pack 3System drive C: has 133 GB (90%) free of 148 GBTotal RAM: 502 MB (10% free)Logfile of Trend Micro HijackThis v2.0.2Scan saved at 9:34:56 PM, on 6/13/2009Platform: Windows XP SP3 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16827)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\Explorer.EXEC:\WINDOWS\ehome\ehtray.exeC:\WINDOWS\system32\hkcmd.exeC:\WINDOWS\system32\igfxpers.exeC:\Program Files\Java\jre1.6.0_07\bin\jusched.exeC:\Program Files\CyberLink\PowerDVD\DVDLauncher.exeC:\Program Files\Real\RealPlayer\RealPlay.exeC:\WINDOWS\system32\dla\tfswctrl.exeC:\Program Files\Goog... Read more

A:Blue screen/reboot

Hello and to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.-----------------------------------------------------------We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, ... Read more

2 more replies
Answer Match 74.76%

Ever since my sister installed SP2 (her XP Disk had only SP1), it just keeps rebooting with a blue screen until she is able to get into Safe Mode to do a System Restore. Any idea as to what may be causing this? Some sort of hardware conflict? Let me know your suggestions. Thanks!

A:After SP2, reboot w/ blue screen

So you are saying that she did a system restore? If she did, then I would suggest re-downloading SP2 and reinstalling it, and see if that works.

1 more replies
Answer Match 74.76%

Not sure if I am infected since antimalwarebytes, AVG, and Superantispyware does not seem to be pulling up any red flags, but occasionally my computer will blue screen and then reboot on its own or I have to do it manually. Seems to happen once or twice every three or four days. I am usually playing music on the comp and browsing the net or gaming when it happens but occasionally it will just do this when nothing is open at all... like in the middle of the night. Any suggestions..?

A:Blue Screen Reboot

I am thinking that it may be related somehow to the media files. The Pattern seems to happen mostly when I am playing music from frostwire, media player, google music manager or pandora... I just downloaded a pandora desktop app today and blue screen hit probably ten times... continues to do so after I removed the app but not as often... used ccleaner and defraggler... Antimalware pulled up a clean slate... Avg is also clean... I could be wrong but there seems to be a pattern with the media files.

4 more replies
Answer Match 74.76%

Sometimes when I launch adobe after effects, after about 10 seconds, I get a blue screen that flashes fast then a system reboot. I've uninstalled and reinstalled numerous times. Attached is a jpg of the blue screen info. I had to use a digital camera as this is up for about a half second then the reboot. Sometimes after effects launches without any problems - I usually leave it (After Effects) open without a heavy video open just to save time the next time I need to use it. This problem seems to hit or miss. Sometimes it opens with no problems sometimes after a half dozen tries I give up and try again later.

Windows xp pro x64, 8gig ram, amd x2 6000, nvidia quadro 1500, 500gig hd.
 

A:blue screen and reboot in win xp pro x64

16 more replies
Answer Match 74.34%

I have had a dell laptop running windows vista for about a year. When I first got it, it would shut down randomly sometimes displaying a black or stripped screen. I downloaded something from windows update, which seemed to have stopped it. However, it started doing this again recently, and I can't figure out a pattern as to when it is shutting down. After the screen appears, I turn the computer off, and restart it, and everything goes fine for a few hours, and then it does this again. Is there a way to stop this from happening??

A:Vista Striped Screen

hi and welcome have a look in device manager at the sound video and game controllers look for any yellow ! or red X if you have either go to dell site and download the newest driver

17 more replies
Answer Match 74.34%

Hi everyone. I'm having trouble with my Acer laptop. This is what happened. I recieved an automatic update for IE9. I tryed it out, I did not like the new settings. So, I tryed to delete it, it said that I do not have permission to do that. So I did a System Restore to go back to IE8 and it looked like it was doing it's thing. Then it went into the Blue Error Screen. I turned my laptop off and then back on after a minute or so. Everything looked ok, all the intros still come on but "Windows Vista Home Premium 32bit (Full Version) Login Screen or Welcome Screen" does not load at all. Just stays on a blank black screen with the mouse arrow. I tried using the F8 options on the laptop but they have not done anything so far. SafeMode does not work and apparently there are no Restore Points anymore. No Backups either. Command Prompt still works. I did a scan and it said there is nothing wrong but there is. Should I get the full version of Windows Vista Install Disk and use the Repair option from there? You know where the disk has options like Install, Uninstall, Repair? I'm not talking about a Recovery Disk with the same F8 options as my laptop.

A:No Windows Vista Login Screen after System Restore goes into Blue Error Screen.

Originally Posted by staypuft


Hi everyone. I'm having trouble with my Acer laptop. This is what happened. I recieved an automatic update for IE9. I tryed it out, I did not like the new settings. I tryed to delete it, it said that I do not have permission to do that. So I did a system restore to go back to IE8 and it looked like it was doing it's thing. Then it went into Blue Error Screen. I turned my laptop off and then back on after a minute or so. Everything looked ok, all intros still comes on but "Windows Vista Home Premium 32bit (Full Version) Login Screen or Welcome Screen" does not load at all. Just stays with a blank screen and arrow. I tried using the F8 options on the laptop but they have done nothing so far. SafeMode does not work and apparently there are no Restore Points. No Backups either. Command Prompt still works. I did a scan and it said there is nothing wrong but there is. Should I get the full version of Windows Vista Install Disc and use the repair option from there? You know where it has options like Install, Uninstall, Repair? I'm not talking about a Recovery Disc with same F8 options.



Can someone please give me an explaination on how I can boot a disc from a DVD drive. I'm unable to login to Windows Vista, do I use the Command Prompts to boot a disc?

5 more replies
Answer Match 74.34%

Hi,



I have a Dell Inspiron 6000 and today I suddenly got a blue screen error message, the main message said "PAGE_FAULT_IN_NONPAGED_AREA". After rebooting, I got the same message. Then on the next reboot I couldn't get to the login screen.



I used my Dell OS Recovery CD that I created to try and repair Windows XP. It asked for a place to partition/fragment Windows, and then it went through copying files etc.



After that, I tried to restart, I got the normal Dell Boot screen but then it went to a black screen, with only a flashing cursor in the top left hand corner.



I cannot do the Ctrl Alt F11 option to recover Windows XP, I can only either choose F2 or F12 at the initial boot screen.



Please help, I really do not know what to do!



What is the blue screen error message all about? I haven't installed any software or hardware so I do not see what might of caused the problem!



Help!

A:Inspiron 6000 - Blue screen error, now black screen on boot, help!

Do you have another windows xp cd you can get your hands on? I recommend performing a checkdisk repair on your computer and see if that helps.

2 more replies
Answer Match 74.34%

Hi all,

Starting yesterday my computer would go through startup... while loading the desktop it would crash to blue screen with white text (unfortunately, I can't remember the exact error message). If restarted, it either goes to a blank black screen or back to blue, and I could only get the computer to operate in safe mode with networking. My antivirus software (avast free, malwarebytes)scanned and found no infections.

I have Windows 7, Samsung laptop.

Today, I was able to start the computer normally and am functioning with internet (still acting a little funny), but I am sure something is still not right. I also did a system restore last night, with the same problems (crashing, not starting up).

Any assistance would be highly appreciated!

Thanks in advance,

Brit

PS: I (goofily) started a similar topic in the "Windows 7" forum section without knowing this section was down here... Sorry! I tried to delete the topic/post but couldn't. Thanks.

A:Blue Screen with Error Messages, Blank Black Screen on startup

Hello,I will be helping you with your problems. Please be patient while I assist you.Some points for you to keep in mind while I am helping you to make things go easier and faster for both of us Please do NOT run, install or uninstall any programs, unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability. Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post. Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process. Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At the top of your post, click on the Watch Topic Butt... Read more

14 more replies
Answer Match 73.92%

Hi,
Specs Pentium 4, 1.3 ghz 512 RAM, running XP Pro, 120 HD (Two a 40 and 80). Problem is my computer will boot quickly flash a blue stop error and then reboot. The computer was working fine until yesterday when I went to print a form I downloaded from online and then the computer restarted and began doing the procedures above. The only thing I have done to it in the last couple of weeks is install quicken and skype. I can boot into the computer through safe mode. However, every other method I use to try and boot up will not work. Question is what can I do in safe mode to trouble shoot the computer. As far as the error is concerned, the screen flashes on and off too quickly for me to see any error code. Any assistance/guidance would be greatly appreciated. Thank you
 

A:Solved: Blue Screen and then Reboot

6 more replies
Answer Match 73.92%

My nod32 alerts me that i have an OBU trojan threat. I always have a blue screen when i reboot. I also get warnings that i have missing .dll files.
In display options, the desktop and screensaver tabs are also missing. I have already removed a rogue antivirus2008 but the problem remains.

here is my HJT log
Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 7:59:25 AM, on 8/14/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Nero\Nero 7\InCD\InCDsrv.exe
C:\Program Files\Eset\nod32krn.exe
C:\Program Files\Sunbelt Software\CounterSpy\SBCSSvc.exe
C:\Program Files\Spyware Doctor\pctsAuxs.exe
C:\Program Files\Spyware Doctor\pctsSvc.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Spyware Doctor\pctsTray.exe
C:\WINDOWS\system32\wdfmgr.exe
C:\Program Files\ATI Technologies\ATI Control Panel\atiptaxx.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\Program Files\Eset\nod32kui.exe
C:\Program Files\Nero\Nero 7\InCD\NBHGui.exe
C:\Program Files\Nero\Nero 7\InCD\InCD.exe
C:\Program Files\Java\jre1.6.0_07\bin\jusched.exe
C:\Program ... Read more

A:OBU Trojan and blue screen when reboot

I forgot to mention that im running on windows XP
 

3 more replies
Answer Match 73.92%

My, home built, Windows XP w/SP3 pc is having problems all of a sudden. About every other or every third time i turn it on, it doesn't work. Sometimes nothing happens, sometimes it will "post" then nothing, sometimes it will start windows then blue screen and reboot or do nothing and sometimes windows will start then go blank. Other times it starts fine.

I have not made any hardware or software changes or updates that coincided with anything happening. I have even done the following: reformatted current HD (no changes), replaced the HD with a brand new one (no changes), replaced the memory with brand new (no changes).
I am at wits end on this one! When it does blue screen, it is only on for a fraction of a second, so I can't read anything that it says unfortunately. I have tried to take a pic, but it's still too fast for me.

Any ideas or help would be wonderful! Motherboard? Bios? A simple fix? Glitch? I don't want to spend any more $ as I've already bought a new HD and Memory (might as well get a new pc) but I am just hoping someone out there can shed some light and hopefully a solution to this annoying problem.

Thanks so much!
 

A:XP Blue Screen, Reboot Problems?

any ideas?
 

1 more replies
Answer Match 73.92%

I have a problem since 1 week now. Programs started to shutdown anytime ...when i wanted to transfer file from a hdd to another blue screen appear...windows explorer just closing and restarting...windows keep rebooting by it self.....i was tired so i tried today to format and reinstall vista(i don<t do that except when i don<t know what to do anymore).Formated the raid hdd it was on and started the installation..guess what ..blue screen again during installation..tried again ...windows did install completely but just after initializing windows the computer gave me another blue screen..i tried to install it onto another internal hdd because i tought maybe 1 of the 2 hdd of the raid had bad sector or was corrupt...but same thing happens... is it a mother board problem...heating problem i don<t know.

A:blue screen reboot problem

Please provide us with the information specified in this post: http://www.techsupportforum.com/1871981-post2.html

1 more replies
Answer Match 73.92%

Hello, everyone. Thank you in advance to anyone offering assistance. I'll start with some background information.I've just recently obtained a computer that was still running Windows XP Pro without any Service Packs installed. I originally had trouble installing the updates because I was receiving an error that said something along the lines of BITS 2.0 and WinHTTP 5.1 couldn't be installed. After quite a bit of searching online I fixed the problem by changing the permissions settings in the registry.After that was fixed I was rather relieved because I figured I would finally be able to update the computer to SP2. After installing several Windows Updates I restarted the computer only to receive a blue screen of death. The exact error was:*** STOP: 0x0000008E (0xC0000005, 0xF7C30C86, 0xA22D9CB0,0x00000000)I then started searching what could be causing the STOP error. I looked online again and found malware was the cause of the error it seemed. So I followed the advice in the other thread and downloaded Look2Me-Destroyer, F-Secure BlackLight, KillBox, ATF Cleaner and AVG Anti-Spyware. I ran them all, and deleted two high risk trojans with AVG. Next, I scanned with BlackLight and was given the following message from the log:02/28/08 01:57:15 [Info]: Hidden process: C:\WINDOWS\system32\koos.exe02/28/08 01:57:52 [Info]: Hidden file: C:\WINDOWS\system32\koos.exe02/28/08 01:57:52 [Info]: Hidden file: c:\WINDOWS\system32\kprof02/28/08 01:5... Read more

A:Blue Screen Of Death On Reboot

Hi and welcome,

Sorry for delay.
If you still need help and not recieving help elsewhere, please post a fresh hijackthis log here.

Reason it is so difficult to remove some of those files is because they are using rootkit tactics to hide themselves and protect themselves from the system or tools from accessing them.

Don't try installing SP2 yet because malware + SP2 install don't work well together.

Safe mode works -- we'll work with that.

thanks

17 more replies
Answer Match 73.92%

Occasionally while surfing the net I get the "Blue Screen of Death" followed by a very fast reboot. The blue screen flashes for just a second or two and then the computer reboots. I don't have time to read what is on the screen.
This only happens when I "click" to access a different site then the one I am curently viewing. On occasion after reboot, I will get the "send don't send" error report window. I click "send" and windows tells me I must be connected to the internet to send report. Nothing is sent even though I am always connected (DSL).

Is there a Explorer bug that I need to download some kind of fix for this?

Windows XP Pro
AMD XP 3200+ 220 GHz
1.00GB Ram
Epox EP-8RDA Pro MotherBoard

Thanks

A:Blue Screen Of Death/reboot

All right to be able to see what the core you're getting on the blue screen of death also called stop screen, okay I'm going to need you to go to start, my computers, right-click on it, then select properties, then go to advanced tab, then you will see something that says system recovery options click the settings button right next to it, once you are there uncheck restarts to system at syatem faliure and click OK. So the next time your computer has a problem like this again instead of restarting it will stay on that blue screen where many needy to do is copy down what you see on that blue screen it'll show somethingthat look like this (00000000x00000). One of them you do is please copy down that number and put it on your next post.

Thank you for joining bleepingcomputer I hope you enjoy your stay

Good luck

4 more replies
Answer Match 73.92%

Error
Stop: 0x0000000A (0XF7FD2F08, 0X000000002, 0X00000000, 0X804F8823

HP branded, but used a different XP Home install cause of PRIOR issues with instant reboots as well

XP Home SP2
HP Pavilion a630n
Motherboard: ASUS name: PTGD1-LA

Pent. 4 2.8Ghz
1.5 GB Ram (1GB Corsair Ram, 2 x 256meg RAM (Kingston) = (Originally only came with the 2 x 256meg RAM)
160 GB Seagate HD
256 Geforce 8600GTS (Originally a onboard video card)
PSU: [New] 480W Enermax with dual silent fan (Originally some crappy 320W No-Name Chinese one)

I had prior problems with this computer as it kept rebooting itself as well, without the blue screen though.
Now its happening again even though I have did a total format and have installed with a clean XP (non branded one).

The sudden blue screens don't have any pattern with them. Sometimes when I'm just trying to get to the login screen, it does it. Other times I'm trying to use firefox it does it. Sometimes when I am using WinRar it crashes. The pattern is totally not consistent

==============================
My assumptions is that it may be my RAM. But could drivers also be an issue?

A:Sudden Blue Screen Reboot

Drivers could be the problem.Check your devices in Device Manager (Start > Run > type "devmgmt.msc" (without the quotes) and press Enter). Look for any ! or X symbols.Testing the RAM wouldn't be a bad idea also. You can do this with memtest86.More reading: Troubleshooting a Stop 0x0000000A error in Windows XP

3 more replies
Answer Match 73.92%

Disable or uninstall any anti-virus disk defragmentation or backup utilities. Check your hard drive configuration and check for any updated drivers. run chkdsk /f to check for hard drive corruption, and then restart your computer safe mode

*** STOP: 0x00000024 (0x00190203, 0x813172B8, 0x0000102, 0x0000000)

I was on my computer a few hours ago and everything was fine then I started it about and hour ago and it said this and I've restarted it about 5 times with the same result. I've tried to restart in safe mode but I still get the same thing. Anyone know how to fix this? Thanks

Misty
 

More replies
Answer Match 73.92%

So i am running windows vista with all the most recent updates. It randomly happens i get a blue screen for a split second then a reboot and here is the info windows vista gives me ...

Problem signature
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033

Files that help describe the problem (some files may no longer be available)
Mini031408-01.dmp
sysdata.xml
Version.txt

View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.

Extra information about the problem
BCCode: c5
BCP1: 0000DD58
BCP2: 00000002
BCP3: 00000000
BCP4: 820E17C7
OS Version: 6_0_6000
Service Pack: 0_0
Product: 768_1
Server information: fa056b9f-529c-40c3-a00c-9c0d94e5f0b6

and also this ...
Problem caused by computer hardware

This problem was caused by an unrecoverable hardware error that caused the operating system to stop functioning.

Troubleshooting

--------------------------------------------------------------------------------
If you have received this error more than once, it could indicate a serious problem with your computer. We recommend that you do the following:

Back up your files to avoid data loss in case of a complete hardware failure.
Contact the original manufacturer of your computer to determine the specific component which is failing.
Additional technical information

Although we know the problem is caused by a hardware component, the error report do... Read more

A:Random blue Screen then reboot

9 more replies
Answer Match 73.92%

I keep getting a blue screen that says there a memory problem and I reboot and it works slow for a while then it happens all over again

I have run my virus and spyware programs and yet they do not find anything

I am running xp sp2

A:blue screen with a reboot problem

Hello and welcome to TSF.

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

1 more replies
Answer Match 73.92%

Hello and welcome to another BlueScream!!!

My Vista is;Home Premium

32bit
original OS
OEM Install

No new updates available

Service pack 2

Gateway M-6322

Intel(R) Pentium(R) dual CPU T2370 @ 1.73 GHz

3GB Ram

Please see the attached zip file.

I am having trouble getting the health report to a file and need more help there.

Crash will stop computer mainly with picture and video viewing and or just time based (Froze during antivirus check.)

McAfee, SuperAntiSpyware, and Malwarebytes, CCleaner are used.

Computer was working great and also noticed during check disk orphaned WerFaultSecure.exe was restored.... HUMMMMMM

Please help if you can...

KZ

A:Blue Screen/freeze and no reboot

Looks like its caused by your Super Anti Spyware
Uninstall using the uninstall tool if any.
The best combination of Software, used by me and many others is:
Microsoft Security Essentials
Malwarebytes
and Spyblaster
If you paid for AntiSpyware, the money is gone
might as well use some of the best and the same money is gone.

Make a system restore point before making changes so that you can go back if not satisfied.

14 more replies
Answer Match 73.92%

Summary-

So, just now I was trying to set-up a wireless network from my xbox 360 and PS3. I had just hit "locate wireless units" or something, and a weird blue screen flashed up ( wierd in terms the text was different, and it looked different altogether from vista/xp). The message said something about finding a file and how it required a reboot to clean it. After it rebooted, I booted it into Safe mode with networking, at the prompt. I don't know where to go from here.

Btw, I'm not very tech savy, so please be patient with me. Also, Here is some info I think you need to know:

Antivirus- Free Avg 2011, up to date, I ran it manually on a quick/or full scan recently. I belive it is also on a schedule for every night.

OS- Windows 7 64-bit Home edition ( should be up to date)

I believe Java and all other programs are up to date..

My PS3 has been on possible-malicious sites. But the PS3 was off and not connected to my laptop at the time I recieved the message of the virus..

A:Blue Screen Reboot.. Windows 7

Hello unsure myself of what that was\. Let's get a scan log or two.Reboot into Safe Mode with Networking How to enter safe mode(XP)Using the F8 MethodRestart your computer. When the machine first starts again it will generally list some equipment that is installed in your machine, amount of memory, hard drives installed etc. At this point you should gently tap the F8 key repeatedly until you are presented with a Windows XP Advanced Options menu. Select the option for Safe Mode with Networking using the arrow keys. Then press enter on your keyboard to boot into Safe Mode. >>>> Download this file and doubleclick on it to run it. Allow the information to be merged with the registry.RKill....Download and Run RKillPlease download RKill by Grinler from one of the 4 links below and save it to your desktop.

Link 1
Link 2
Link 3
Link 4

Before we begin, you should disable your anti-malware softwares you have installed so they do not interfere RKill running as some anti-malware softwares detect RKill as malicious. Please refer to this page if you are not sure how.
Double-click on Rkill on your desktop to run it. (If you are using Windows Vista, please right-click on it and select Run As Administrator)
A black screen will appear and then disappear. Please do not worry, that is normal. This means that the tool has been successfully executed.
If nothing happens or if the tool does not run, please let me know in your next replyDo not reboot your co... Read more

1 more replies
Answer Match 73.92%

ok i know there is like 100 topics on this but i dont get it..... ok heres my problem
i occasionally get a blue screen saying- Fatal error and many more stuff, i cant read it all because the blue screen lasts for about 1 second and then restarts my computer. this is very annoyin someone please help me!

all help is appreciated
thanks
Kevin
 

A:Blue Screen!!! reboot, -typical =.=

You could look in EventViewer and look at any errors at about the same time as the crash.

Go Start>>Run type eventvwr.msc and look in System and Applications for any events about the same time usually with red X beside it....click on the event and read what it says and if it has a blue hyper link click on that for more info
Also you could turn Off Automatically Restart PC so the Error stays up for you to read.

How to turn off Automatically Restart

Click Start then right click My Computer choose Properties
Then Advanced tab
Under Startup & Recovery click Settings
Under System failure uncheck Automatically Restart
Click OK.
Now the Error message should stay up so you can read it.
 

2 more replies
Answer Match 73.92%

Hi,
I've a DIY PC that often reboot by itself. When I bought this PC, it worked fine for a year.
The initial problem was it crashed & reboot after the OS is started for a while. The reboot became so frequent that I have to take it back to the shop. The owner just took out the RAM and wipe it and the PC works fine for some months. Unfortunately the same problem repeated after some months and I have to take out the RAM and wipe it to let it run normally.
Now the problem has gone more severe. Not only wiping the RAM doesn't solve the problem, I have even install a clean OS to test if it was caused by my OS, but the new OS also crashed and reboot after a while.
The reboot occurs after shortly the OS is started. Sometimes the crash can happen continuously until the OS can't boot. Usually when this happen, I'll boot with my second disk (with a clean OS) and the PC tends to work for a while, although the second disk still crash occassionally after running a short while.
Since the motherboard is MSI, I did a live scan with the MSI website to update its firmware or drivers. Unfortunately the website return showing the firmware is up-to-date.
Can someone enlighten me what could be the problem please? By the way the OS is Windows XP. I've also tried installing XP and Windows 7 as a clean OS for testing and the reboot still persists.

Thanks in advance for your guidance.

A:Blue screen and auto reboot

Your description may indicate a memory fault or incompatibility. Provide the following information about your hardware so we can check compatibility:Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot. To upload all screenshots, it would be best to:generate the images using the Snipping Tool,
go to where the images are saved,
right click in a blank area within the folder where the images are saved,
create a new folder,
name the folder CPUZ,
select all the images,
place the pointer over an image,
press and hold down the left mouse button and drag the image (all images should move with it),
drop the images into the CPUZ directory you created,
create a compressed (zipped) folder of CPUZ
upload the .zip file to the forums.
Run some memory related diagnostics:
Quote:




NOTE:If you are overclocking any hardware, please stop.





Run display device memory tests to check the display card for memory problems.Display device memory tests
Run Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.Test RAM with Memtest86+
Run Prime95 to test your CPU, RAM modules, and general hardware.Prime95 Hardware Stress Testing Steps

-----

13 more replies
Answer Match 73.92%

I'm having problems trying to reboot my laptop (Toshiba Portege M200).
It crashed a while ago for no apparent reason and since then I have been unable to reboot the PC without reaching a blue screen (see pic). Every time the screen appears I get a loop of the laptop trying to reboot itself in a continuous cycle. I have had this problem before and managed to reinstall back to factory settings by using the DVD provided. However, I had to use an external floppy disk drive to get this reboot to work as my laptop, no matter what I do, just won’t pick up the external DVD/CD ROM. I downloaded some data on the floppy that basically caused my laptop to look at the external DVD/CD ROM so the reinstall kicked in. I’ve tried this same process again, but unfortunately I’m getting stuck with a black screen (see attached pic)
I've not installed any new hardware or software (which seems to cause this issue with the blue screen) and my laptop won't start in safe mode or any other mode - it just does the same thing blue screen reboots and so on.

Any suggestions of feedback would be greatly appreciated.
Thanks
 

A:Blue screen reboot problems

Remove the optical drive, and reseat it. You can probably do this in 5 minutes - Google youtube for instructions for your machine.

If that doesn't work, take the drive back out, and to a shop, and see it they'll swap it into another machine, and see if it's detected by their machine. Might cost $5, maybe not.

If it is not detected, it's probably wasted. If it IS detected, the problem could be your motherboard, or maybe just the BIOS. See if you can flash the BIOS, and repair the optical drive's I/O channel...
 

2 more replies
Answer Match 73.92%

I am running Windows XP Home edition
300 GB hard drive
2 GB Ram

for the past 3 weeks, my computer has been rebooting, and nothing has been a repeat
for the reason .

I can be doing most anything.....mostly it does it if i am watching a movie or viewing
a tv show, at least that is when it does it the most. Does it other times also.

These are a few of the messages i have gotten (on the blue screen)
BAD_POOL_HEADER....0X00000019

PFN_LIST_CORRUPT
0X0000004e

BUGCODE_USB_DRIVER
0X000000FE

IRQL_NOT_LESS_OR_EQUAL
0X0000000A

I have had other messages, but these are the ones i copied down.

Previously , when it first started happening, the computer just rebooted......
I went into My Computer...Properties...Advanced Tab and clicked the setting under STARTUP AND RECOVERY
under system failure I UNCHECKED AUTO RESTART..

that is how i have been getting the messages above.

Can anyone help me with this issue.
I have read a lot on each different number code but getting all sorts of things, from tower getting too hot
to bad RAM......i have added fans......and switched the locaitons on the RAM to see if one would stop working
doesn't seem to be the problem.

I read someone that it could be my power supply, will try that after i hear from someone on this site, to make
sure i am going in the right direction.

There have been days when i didn't get one reboot...and others i get about 5 of them.

I will look forward to any input i can get here.

Thank You
Darlene

Hope i posted in t... Read more

A:Computer blue screen reboot

I've done a little research on the stop error codes you provided. Have you upgraded any hardware or device drivers before the problems occured? After researching the stop error codes, here is what MSDN is saying:BAD_POOL_HEADER - Invalid pool headerPFN_LIST_CORRUPT - Incompatible hardwareBUGCODE_USB_DRIVER - Invalid USB URB parameterIRQL_NOT_LESS_OR_EQUAL - Driver requesting invalid memory addressThe first two errors are indicating either incompatible hardware or hardware failure. The fourth is indicating bad drivers or third party applications that were recently installed generated errors during boot. If you have added hardware recently I'd check the Microsoft Hardware Compatibility List and remove any incompatible hardware. Otherwise, try booting into safe mode and going to 'Last Known Good Configuration.' If that doesn't work, run the Windows Recovery Console

17 more replies
Answer Match 73.92%

Whenever playing games it usually crash right when it starts, though not at the menu. The game this keeps happening on is Football Manager 2010. Has only just started happening i have had the game over a week and havent had a problem. I know that my laptop does struggle to run it but has worked prior to this fine.

Quickly quits out on the game then a blue screen comes up but before you can read anything it restarts. Then when logging back on gives you the message saying The system has recovered from a serious error, send error report or dont send.

Im not the best on computer but have gained this information.



Quote:




C:\DOCUME~1\James\LOCALS~1\Temp\WER3560.dir00\Mini111709-03.dmp
C:\DOCUME~1\James\LOCALS~1\Temp\WER3560.dir00\sysdata.xml

BCCode : 10000050 BCP1 : E2827004 BCP2 : 00000001 BCP3 : F60C594E
BCP4 : 00000001 OSVer : 5_1_2600 SP : 3_0 Product : 256_1





Thanks in advance for trying to help

If any other information I will try my best to find it

More replies
Answer Match 73.92%

Hey I'm having little problem well basically it turn off like quite often  
 
Problem signature:Problem Event Name:BlueScreenOS Version:6.1.7601.2.1.0.768.3Locale ID:2057Additional information about the problem:BCCode:124BCP1:0000000000000000BCP2:FFFFFA8004B038F8BCP3:0000000000000000BCP4:0000000000000000OS Version:6_1_7601Service Pack:1_0Product:768_1Files that help describe the problem:C:\Windows\Minidump\040613-15678-01.dmpC:\Users\Matt#\AppData\Local\Temp\WER-31247-0.sysdata.xmlRead our privacy statement online:http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409If the online privacy statement is not available, please read our privacy statement offline:C:\Windows\system32\en-US\erofflps.txt
 
Problem signature:Problem Event Name:BlueScreenOS Version:6.1.7601.2.1.0.768.3Locale ID:2057Additional information about the problem:BCCode:124BCP1:0000000000000000BCP2:FFFFFA8004DBB038BCP3:0000000000000000BCP4:0000000000000000OS Version:6_1_7601Service Pack:1_0Product:768_1Files that help describe the problem:C:\Windows\Minidump\040613-35162-01.dmpC:\Users\Matt#\AppData\Local\Temp\WER-44132-0.sysdata.xmlRead our privacy statement online:http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409If the online privacy statement is not available, please read our privacy statement offline:C:\Windows\system32\en-US\erofflps.txt
 
I copied  this from reports also mindump.
Anyone can help me?

A:My computer reboot by it self (blue screen) ?

HI Faild
 
Were there any changes to hardware/software before the BSOD occurred?
The bugcheck minidump
 

Loading Kernel Symbols
...............................................
Loading User Symbols
Mini Kernel Dump does not contain unloaded driver list
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                      &... Read more

7 more replies
Answer Match 73.92%

Hi there, I am having trouble with my windows
brand new computer (6 months old)
Processor : AMD ATHLON 64 4000+ 2.41ghz
RAM: 1Gb 3200 DDR Crucial ( 2x512mb)
Motherboard : NVIDIA nForce4-A939
Graphic Card : NVIDIA GeForce 7950 GT

I have reinstalled my OS to windows XP home SP2.formatted before.I have split my 2 Hard drives into 4 partitions.Windows quits, a blue page appears with some info about memory issues. It is emptying the physical memory. This happen at any time.


My Internet security to Trend Micro 2007.Updated Windows and all my drivers (I think), I used EVEREST.

Firefox quits (I have desable the add-on).and when Windows reboot it gives me : Windows has recovered from a serious issue.
I clicked in tech info :
error signature
BCCode : 4e BCP1 : 00000099 BCP2 : 0001FACD BCP3 : 00000000
BCP4 : 00000000 OSVer : 5_1_2600 SP : 2_0 Product : 768_1


technical info
C:\DOCUME~1\THEBIN~1\LOCALS~1\Temp\WER7d19.dir00\Mini052607-04.dmp
C:\DOCUME~1\THEBIN~1\LOCALS~1\Temp\WER7d19.dir00\sysdata.xml

I am give you a Hijack log :
Logfile of Trend Micro HijackThis v2.0.0 (BETA)
Scan saved at 13:19:26, on 26/05/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\... Read more

A:Windows reboot / blue screen

Hello -

From looking at your log and reading your description, it does not seem as though this would be malware related.

Answers to those questions will be better asked in our Windows XP support forum. The staff and members in that area will be better able to assist you with that.

Do not post a HijackThis log there, as they will only move you back here.

1 more replies
Answer Match 73.92%

Alright, so i've had this issue for a while, and it's only been getting worse.

Whenever I have to reboot my computer, or when i'm turning it on after it's been powered down, it is rebooting just as it gets to the Windows loading screen, and usually fails to start up on second boot sending me to the start up repair tool.

Typically to resolve the issue temporarily, I have had to use the last known good configuration, but recently that isn't even working. I am now having to use system restore to go back a couple of days, no matter what i've done, or have been doing.

It has also been having issues waking from sleep (which is the primary method of "shutting it down" as of the last 6 months) Often times my computer will simply say "No signal" until I restart or shut down the computer.

Most often during these auto-reboot loops a BSOD will flash up briefly before it restarts. It has also been mentioning something of possible graphics card issues, and most recently has mentioned hardware being recently connected that could be causing the issue. Though if I remember correctly, that is a generic message.

When going through the start up repair last night I gathered this information.

Root Cause Found:
------------------
Unknown Bugcheck: Bugcheck 124. Parameters = 0x0, 0xFFFFFa8008231038, 0xb2000040, 0x800.

Repair Action: System files integrity check and repair.

Result: Failed. Error Code = 0x490
Time Taken = 753594ms

I then later got a BSOD:

Stop 0x0000009C... Read more

A:Blue Screen only during start up or reboot

The only dump included indicates a BugCheck 124 and is an unrecoverable hardware failure. These are hard to track down even when the WHEA record is present. In your case, it's indicating a CPU L0 cache error. This is the primary processor cache from which all data and code flows. Processor cache errors can be caused by low voltage, high temperatures and/or system memory errors.

If you are OCing the CPU, return it to default timings and voltages.
If you are not OCing, use a hardware monitor that will display voltages and temperatures and monitor for excessive heat and low voltages. Intel specifies a maximum of +/- 5%


Code:

1: kd> !errrec fffffa80082d5038
===============================================================================
Common Platform Error Record @ fffffa80082d5038
-------------------------------------------------------------------------------
Record Id : 01cd60ce340a8ac4
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 7/13/2012 8:05:14
Flags : 0x00000000
===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ fffffa80082d50b8
Section @ fffffa80082d5190
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal
Proc. Type : x86/x64
Instr. Set : x64
Error Ty... Read more

9 more replies
Answer Match 73.92%

Here is a new problem that I am having and I hope you guys can help. I get this message everytime I try and boot my computer. I can not access the network or internet.

(BIOS A00)

Primary Master: WDC WD600BB-75CAA0 16.06V16
Primary Slave: None
Secondary Master: GCR-8481B 1.06
Secondary Slave: None

Primary Master Hard Risk S.M.A.R.T. Status Bad S.M.A.R.T. Error Detected. The IDE Hard Disk Drive is operating outside normal specifications. It is advisable to immediately back up your data and replace your hard-disk drive by calling your support desk or Dell Computer Corporation.

Also, here is my hijack this log:

Logfile of HijackThis v1.99.1
Scan saved at 10:09:46 AM, on 6/7/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\cisvc.exe
C:\Program Files\McAfee\McAfee Firewall\CPD.EXE
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\hkcmd.exe
C:\Program Files\McAfee\McAfee Shared Components\Instant Updater\RuLaunch.exe
C:\Program Files\McAfee\McAfee Shared Components\Guardian\CMGrdian.exe
C:\Program Files\QuickTime\qttask.exe
C:\Program Files\Microsoft AntiSpyware\gcasServ.exe
C:\WINDOWS\System32\ctfmon.exe
C:\Program Files\Dell Support\DSAgnt.exe
C:\Program Files\Digital Line Det... Read more

A:Blue Screen and then Reboot Problems

Can anyone help??
 

1 more replies
Answer Match 73.92%

Hello,

My sister recently got a Acer Aspire One D150 Intel Atom 1.6Ghz XP Netbook.
It runs (obviously) on XP and it is refurbished. I'll run you through the problem:

I'll hit power button then the Acer splash image with "F12 to enter BIOS" shows.
Then the typical startup error message (white on black) comes up:
We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent setting that worked.

If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt

Last Known Good Configuration (your most recent settings that worked)

Start Windows NormallyUse the up and down arrow keys to move the highlight to your choice.Choosing any of the options will lead to a blue screen that flashes really quick and then reboots the computer. Choosing Safe Mode choices will show all the system files load and will show a blue screen error about half a screen in length. Choosing the other two options will show the Windows XP loading bar, then show a blue screen error about 6 lines in length. All options ... Read more

A:XP Blue Screen Reboot Cycle

Blue screen errors aren't usually an "easy fix" especially if you don't have a cd/dvd rom.

I would suggest sending it back rather than struggling yourself.

1 more replies
Answer Match 73.92%

Hey Everybody,

Need some help.

My computer reboots as soon as it starts logging in from the welcome screen in windows. There is no way past it.

It works fine in safe mode as well including with networking, ergo this message.

The log says:

The computer has rebooted from a bugcheck. The bugcheck was: 0x1000008e (0xc000001d, 0x8061bbc7, 0xb4522b70, 0x00000000). A dump was saved in: C:\WINDOWS\Minidump\Mini091008-06.dmp.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

I have attached the dump file.

I have also attached the ntbtlog.txt file that may help to determine what the issue is.

Any help in this regard would be greatly appreciated.

Thanks a lot!

-Raj

View attachment 35692
 

A:Blue Screen of Death upon Reboot

The BEST advice I could find:

http://www.windowsbbs.com/windows-xp/60664-only-boots-safe-mode.html
 

3 more replies
Answer Match 73.92%

Hi I recently receaved an error on my laptop stating that it would have to restart.  Unfortunately it never restarted properly and when i switch it on or off i only get a blank blue screen.  If i hit the f11 key continuosly when restarting i only get same screen but small text lower left corner stating 'F11....Sytem recovery'  But nothing happens other than this. Any help and advice on this would be much appreciated, thanks! Colin  

More replies
Answer Match 73.92%

My PC is rebooting or bluescreening and I'm not sure why - can anyone help?

One of the 1001 event logs reads:

Event ID: 1001
Source: Save Dump

Description: The computer has rebooted from a bugcheck. The bugcheck was: 0x100000d1 (0x00000000, 0x00000002, 0x00000000, 0x00000000). A dump was saved in: C:\WINDOWS\Minidump\Mini100605-02.dmp.

and one of the 1003 event logs reads:

Event ID: 1003
Source: System Error

Description: Error code 100000d1, parameter1 00000000, parameter2 00000002, parameter3 00000000, parameter4 00000000.

I've attached the five most recent minidumps in a zip file.

I'd really appreciate any help or advice as it's getting a bit annoying now.

Thanks, gman70
 

A:Blue Screen/Reboot problems

Hello and welcome to Techspot.

All you minidumps crash at cmaudio.sys, which is your c-media wdm onboard sound driver.

Uninstall your onboard sound from your device manager, then reinstall with the latest drivers.

Regards Howard :wave: :wave:
 

2 more replies
Answer Match 73.92%

Building a computer like everyone. My friend (IT Guru) and I have put on XP Pro, went fine. Downloaded the SP3 Updates (High Priority) went fine. Downloaded the Mother Board Disc, went fine. Downloaded the XFX disc and rebooted. Note, we rebooted after each of the other steps, however, this time the system will go and start the Windows screen with the blue lines going across and when that stops, a blue screen (too fast to see) and reboot. If you like to stare at this, it goes on and on. You can get in to Safe Mode but that is it. The Guru reinstalled XP again and created restore points manually. He then put one thing on after another and everything went fine, until the XFX disc went in. Now a black sceen. So we are going to make sure the card is getting enough power tomorrow and run Riva tuner, also we haven't put in the front and back fans, and will tomorrow. Together we are good, but even with his experiance and know how, we are going to be stumped if the heat or power are not a issue. So if you have a suggestion, please help. Below are the parts that I have, all new.
Motherboard - Asus P5N-D
CPU - Intel 2 Quad 6700
Ram - Corsair 4 G
PSU - Ultra LSP750 750w Power
CPU Cooler
XFX 9800 GTX+ 512mb pci express
 

A:xfx 9800 gtx + blue screen reboot over and over

16 more replies
Answer Match 73.92%

Hi,

I have a Z30-A-1E1 model with Windows 8.1 Pro 64bit.

I'm having ad issue, randomly I got a blue screen and the notebook reboots, without giving error messages.
In the windows event log I can't find anything that clearly led to a cause.

I'm using a Toshiba Dynadoc U3 and I first thougt that it had something to do with it, but the crash happens even if I'm using the notebook disconnected from it.

Does anyone had a problem like this?
Any suggestions for debugging?

Thank you very much!

A:Portege Z30-A-1E1 - blue screen and reboot

Hi

I do not have a complete solution, but perhaps a step on the way.
I would first suggest to disable automatic restart when a bluescreen appear.
That way the error message will stay on the screen until the PC is switched off.

Read about how to prevent automatic restarts here:
http://www.troubleshootwindows.com/w...-8-7-vista-xp/

BR Tom

1 more replies
Answer Match 73.92%

Hi,

I'm running XP HE SP2

One by one things happened:

My antivirus malfunctioned. It's SBC's and CA's Online protection. It keeps turning itself off.

Windows IE won't or can't find any webpagess, it just hangs.
I tried to re-install IE and it loads, but changes nothing.
I would like to continue to use IE (ver 5.50 only).

XP Disk check started each time I rebooted my computer,.

I began to receive a MS reporting tool error signature code -

BCCode: 27
BCP1: BAAD00A3
BCP2: F7984b64
BCP3: F7984860
BCP4: F28b1f34E

OSVer: 5.1.2600
SP: 2.0
Prod: 768.1

E: Docume~1\SG\Locals~1\Temp\WER6769.dir00\mini101706-01.dmp
E: Docume~1\SG\Locals~1\Temp\WER6769.dir00\sysdata.xml

When I tried to shutdown the computer. it would either hang (regular blue window, stating that windows is shutting down) or shutdown, then flashes a blue or black screen for a 10th of a second and then reboot. The screen flashes so fast I could not read it.

How can I get this screen to hold up long enouth for me to read it.?

Now I have to press the start button and hold it to shut down the computer.

Now, I tried to install Bit defender and the package installer would not function.
Now I find that the MS installer is corrupted or not functioning.
I tried to download a new installer and I can install it, but it won't open the Bit defender pkg..

I used hijack and found no new items.
I used defrag and found no problems
I used disk check and found no problems
I used spybot and fo... Read more

A:XP Shutdown then blue screen then reboot

10 more replies
Answer Match 73.92%

Had a blue screen event about a month ago and intermittantly coming out of sleep mode need to reboot system. Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 3
BCP2: FFFFFA80048EFA10
BCP3: FFFFF80004F3B518
BCP4: FFFFFA8008F0E410
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\092314-28813-01.dmp
C:\Users\michael\AppData\Local\Temp\WER-69186-0.sysdata.xml have attached a copy of dump file from notepad, any help would be appreciated. thank you michaelgolfer

A:intermittant reboot after blue screen

Click on the button below ....

It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

1 more replies