Tech Problem Aggregator

How to turn on/enable .NET Framework

Q: How to turn on/enable .NET Framework

I have looked all over the place and have even been tempted to call Microsoft's tech support if they had one and could find the number.
 
But I can't imagine its that hard to turn on/enable .NET Framework. I am running XP Home. I have found the ways how to do it in Windows 7 and 8 and thought it might be similar for XP, not the case or maybe it is and just haven't found it or its buried somewhere. I thought something like the attached screenshot would be easy enough to find to do it and seems it is for 7 and 8. I've been told its easy as checking/unchecking a box.
 
Again the attached image is what I am hoping is what I have to find on my OS but I believe its from Windows 7, 8 or maybe Vista but not sure as I don't have any experience with them.
 

A: How to turn on/enable .NET Framework

Apart from the Media Centre and Tablet PC editions, .NET Framework was not an OS component and so will not appear in the Add/Remove Windows Components list.
 
If it has been installed, .NET Framework will appear in the Add or Remove Programs list, so if it's not there you will need to download and install.

4 more replies
Answer Match 57.96%

Everytime I turn the computor on this comes up and wont go away

Microsoft.Net Framework
an unhandled exception has occured in a component in your application click continue and application will ignore this error ans d attempt to contionue
I clicked continue and nothing happened (?)
Deatails say
To enable (JIT) debugging the config file for this application or machine (machine config) must have the jit debugging volume set in the system. windows. forms section the application must also be compiled wth debugging enable
how and where do i need to go to make this go away or enable it
 

A:Solved: Net Framework (Jit) enable (Should I )

Boot help help
 

3 more replies
Answer Match 57.12%

I just upgraded to Windows 10 x64 today and I am attempting to get everything back up and running the way I like it. I've run across a problem where several things I'm attempting to install are requiring .net framework 3.5 to be enabled. I have now tried this through letting the program attempt to do it, enabling it manually in windows, and using the Dism command in tandem with my win10 USB.

Everytime I try to enable it I get the pop up that eventually gets stuck at searching for required files, or downloading required files. which I can't close outside of killing it in task manager. I have tried rebooting to no success. When I try using cmd and the Dism command it returns the following and stops doing anything.

"Deployment Image Servicing and Management toolVersion: 10.0.10586.0
Image Version: 10.0.10586.0"

The cursor moves to the next blank line but does not give me the ability to type anything. This problem has passed the point of being frustrating any help would be greatly appreciated.

For clarification the Dism command I'm using is: "C:\Windows\system32>Dism.exe /online /enable-feature /featurename:NetFX3 /source:H:\x86\sources\sxs /LimitAccess"

More replies
Answer Match 53.76%

So we all know that in Windows 7, the .NET Framework is already included with the system. With my system, the .NET Framework is currently turned off. Frankly I don't like .NET and I find that its only used during installation of programs; once the program is installed, I usually get rid of .NET and call it a day. I've been doing this for a long time, and I've been running Windows 7 since August without any issues.

Now I need to turn .NET back on so that I can install a program... but I can't. When I try to turn on the .NET Framework in the Programs and Features menu, I get the following error:

An error has occurred. Not all of the features were successfully changed.

Also be advised that I have done a TON of services.msc editing over the course of the months. The System File Checker also found no errors.

A:Can't Turn On .NET Framework?

You've probably disabled some needed service, as I'm sure you're aware; disabling services in Windows 7 causes more problems that it sorts, unlike back in the old XP days.

I'm sure you're also aware that it's going to take a bit of trial and error to sort it out.

8 more replies
Answer Match 51.66%

I am running Windows 7 Home Premium (SP1) on a fairly new machine. I ran malware and McAfee scans which were all clean. I also ran Aaron Stebner's .NET Framework setup verification tool (which was clean as well). I have been using a software program that uses "Microsoft .net 3.5". We have been having some issues with the program and were advised to turn on the following Windows features:Control Panel>Programs>Windows Features>Microsoft .Net 3.5>two checkmarks below thisI have repeatedly checked these, tow at a time, one at a time, etc and the system will give me a "wait message", state that all of the features could not be started and request a re-boot. Upon a re-boot, neither of these features are checked.I have also attempted to re-install 3.5 (and the program itself). We have been unable to re-install 3.5 (it appears to start but just disappears without any confirmation whatsoever). When I look in programs I have Microsoft .Net 4.0, which apparently is the "parent" of 3.5I have also entirely removed both McAfee & Malwarebytes thinking these may have been blocking us, all to no avail, does anybody have any ideas?Thank you anybody in advance!Oh, by the way, system restore is also failing!

A:Microsoft .net framework 3.5 Windows Features Won't turn on

The Stebner tool...is for removing all versions of NET Framework. It does not do anything else.http://msdn.microsoft.com/en-us/kb/kbarticle.aspx?id=318785I would use Mr. Stebner's tool...or simply go to Add/Remove Programs and uninstall each Framework install in reverse order (most current first)...then install Framework 3.5, SP1, http://www.microsoft.com/en-us/download/details.aspx?id=25150 . Note: If using Add/Remove Programs, do not bother with any critical updates which may have been made to a given version...just uninstall NET Framework 4.0 and NET Framework 3.5 (if installed).IF you want/need to reinstall NET 4.0, http://www.microsoft.com/en-us/download/details.aspx?id=17718 .I've never had to do anything to "set up" any version of NET on any of my systems...it just installs. Well, I believe a reboot of the system is necessary but I don't consider that a setup procedure.Louis

3 more replies
Answer Match 51.66%

I have recently ran the net cleanup tool trying to fix an issue (making a clean reinstall), but what I didn't expect would happen, did. I am now stuck where my windows 7 64 bit system does not have net framework 3.5 but thinks it has withing the "Turn off windows features" dialogue. I have attached a DISM log if it helps.

Things I've tried already:
- DLL Purgatory: Unable to Turn On .NET Framework 3.5.1 {PEN001}
- Installing .net framework 3.5 sp1 - received error message that I should remove it in turn off windows features.
- Running cleanups & all automated fixing methods I've found.
- SFC /Scannow - Did not help, returned error. Log attached.
- Installing .net framework 4 - It installs successfully, but does not fix any of my problems as the program im trying to run seems to need net framework 3.5 - The program is Catalyst Control Center, which I am trying to fix. The problem is that it won't, no matter what I do, display any dialogues. It is running in the system tray and all, but won't display. I did manage to get one (yes just one) .Net framework crash with it, so I started fixing it, and instead, ruined it and made my case even worse.

Now I am asking for professional help because no matter what I do I seem to ruin it.

Thanks in advance.

Catalyst info:

Tried every single guide I found on google for fixing any issues related to this. Has been tons of restarts and even more reinstalls, nothing seems to work. For anyone wanting to mention the "Remov... Read more

A:Unable to turn off windows feature .net framework 3.5

Is it allowed to bump here?

9 more replies
Answer Match 51.24%

.
I have Win 7 Home Premium.

Is there an easy way to disable my wireless connection so that (a) it does not enable itself after a reboot, and (b) I don't need to implement the complete process to re-enable the wireless?

Under normal circumstances, the re-enable after a reboot is fine. I can disconnect WiFi from the system tray, and it reconnects after reboot.

But sometimes, I might want wireless to remain disabled after reboot. For example, if I'm doing a database restore, and the database starts synching after a reboot (such as Evernote), it could cause problems :-)

At the moment, I simply switch off the router until the database restore is complete.
.

A:How to turn off WiFi so that it does not re-enable after reboot?

Just don`t let it connect.

Doesn`t the laptop have an on off switch for wireless ? Most laptops do.

1 more replies
Answer Match 51.24%

I have a Dell Inspiron 8500 Laptop with the Dell Truemobile 1300 WLan mini PCI Card
I have tried uninstalling and re-installing the Driver from the Dell website. I have install Network Stumbler and it keeps saying "No Aps Active. I Have MZC and Dellwirless turned off so that they will not conflict with NS. I have tried the FN + F2 keys and neither worked the FN and other keys work just fine. I have just completed a fresh install of Windows XP Pro as the old OS got corrupted. I would appreciate and other Ideas on this matter as I am starting to get frustrated! Thanks
 

A:Wireless radio will not turn on or enable

6 more replies
Answer Match 51.24%

.
I have Win 7 Home Premium.

Is there an easy way to disable my wireless connection so that (a) it does not enable itself after a reboot, and (b) I don't need to implement the complete process to re-enable the wireless?

Under normal circumstances, the re-enable after a reboot is fine. I can disconnect WiFi from the system tray, and it reconnects after reboot.

But sometimes, I might want wireless to remain disabled after reboot. For example, if I'm doing a database restore, and the database starts synching after a reboot (such as Evernote), it could cause problems :-)

At the moment, I simply switch off the router until the database restore is complete.
.

A:How to turn off WiFi so that it does not re-enable after reboot?

Just don`t let it connect.

Doesn`t the laptop have an on off switch for wireless ? Most laptops do.

4 more replies
Answer Match 51.24%

Just got a new T420 and tried the webcam feature but unfortunately it doesn't work. When Fn+F6 is press I only see the audio settings. I installed the latest driver from LENOVO and rebooted the system but it's still the same, just the audio settings. Updated the communication & hotkey as well but did not help.Any help will be much appreciated.. Thanks,-ruki101










Solved!
Go to Solution.

A:Cannot enable or turn-on webcam on T420

As you are unable to use the webcam in your ThinkPad T420. I would suggest you to please re-install the Integrated Camera Driver from the below mentioned web link.
 
http://support.lenovo.com/en_SG/downloads/default.page?
 
After that please perform the following settings.
Press Fn+F6. The Communications settings window opens.Click the Manage Settings button. The Communications Utility window opens.In the Communications Utility window, configure the camera settings depending on your individual needs.
 
 
Regards,
Sameer



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 50.82%

My family and I usually turn off the computer manually by pushing the button located on the "CPU". The computer is setted to turn to sleep .How set it to turn off completly?






if you didn't understood my question asked,please let me know it

English is my sec language

A:How enable the power button to turn off manually

Hi jun and welcome to the forum!

To modify the the behavior of your power button options you can;

Go to Control Panel > Power Options
On the left panel click on "Choose what the power buttons do"
Then select the modifications you want to set

Cheers

3 more replies
Answer Match 50.82%

i dont knw how to switch on the wirelss on my Envy











Solved!
View Solution.

A:How do I enable (turn on) wireless on my Envy laptop?

 Check the Lights on the F12 key if it is amber that means your wirelss is not on ..try to push the F12 Once it will turn Blue and thn try access the internetthat might help youGood Luck

10 more replies
Answer Match 48.72%

  
Windows 8 only comes with .NET framework 4 activated. A lot of desktop programs for i.e consumers requires .NET 3.5 - i.e. Pinnacle or Avid Studio.

 
Here is to add .NET 3.5 using automated installation setups - there is no way to use GPO to automate DISM - except add a startup script to that GPO to command DISM of course. DISM builtin Windows tool activates the unenabled Windows feature making this the
easiest approach to quickly bring back .NET 3.5 availability. 
 
 reg query "HKLM\SOFTWARE\Microsoft\NET Framework Setup\NDP\v3.5"
 if errorlevel 1 dism /online /enable-feature /FeatureName:NetFx


Testing the reg key above is the recommend approach to check .NET framwork release availbility inside the host according to:
http://technet.microsoft.com/en-us/kb/kb.aspx?id=318785

A:"GPO": Enable .NET Framework 3.5 in Windows 8

Hi,

In order to get the answer effectively, I suggest you contact Windows 8 Forum for further assistance. Thank you for your understanding. 

Windows 8 Forum
http://social.technet.microsoft.com/Forums/en/category/w8itproTracy Cai
TechNet Community Support

4 more replies
Answer Match 44.52%

What I really want to know is how to disable my Radeon HD 4350 graphics card, so that I can swap to Intel HD on-board graphics.

This is so I can compare the two on their Windows Experience Index.

Thanks
 

A:How to turn off a graphics card and re-enable the on-board graphics

12 more replies
Answer Match 44.52%

My laptop is Sony VAIO sve 1711 q1eb my adaptor atheros ar 9485. the drivers are reinstalled normally , the wireless service is enabled , the adaptor is enabled but I can't see any available networks (my router is OK I checked it ) and when I go to mobility centre the turn on wireless button is grayed out and my laptop doesn't have any physical WiFi button or any shortcut
And I am sure I did not install any programmes or something

A:cant enable wifi. turn on wifi button grayed out

Was it working before? When did this problem start?

4 more replies
Answer Match 44.52%

I can enable auto turn off screen after period of time in control panel. But i found in lock screen, the monitor won't turn off automatically even if the time period is expired. Is there any way to solve this?

A:How to enable auto-turn-off screen in lock screen

If you haven't, try setting the screen saver (can use blank) and set it to the same time as the monitor time out.

3 more replies
Answer Match 43.26%

Hi I tried twice today to download and install the following updates, Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86. it is a large update taking approx 30mins to download the 248MB package. Both times it got to the end of the download and the next I got was a message saying installation failed. At first I thought it was Comodo BoClean so turned it off the second time but got the same result anyway.
My PC is an AMD Athlon XP2400+, 1GB of RAM running on XP3 and updated via Automatic Updates "notify but do not install". I got a MSN email notification on IE8 RC1 and decided to check my Firewall connection to Microsoft Update, where I was told that the mentioned updates were available and decided to install them though not IE8 at this time.

For real time protection I use Comodo CIS, Comodo BoClean and SpywareBlaster. I switched off BoClean the second time and set CIS to installation mode both times. I cannot see anything else on my PC which could hinder the installation process. In my Add/Remove program list I have Microsoft .NET Framework versions 1.1,1.1 Hotfix, 2.0 Service Pack1, 3.0 Service Pack1, 3.5, Should I uninstall these before installing the latest version or should they all remain on my installed programs?. I would appreciate it if someone could offer some help here as I like to keep my PC up to date.

A:Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86

Hi .Well...let's start with the reason you have MS .NET installed on your system.What applications/drivers do you use which require any version?If you have no such applications...IMO it's not even necessary to install any version of MS .NET on a system. Doing so is a waste of time for those who don't have applications which demand MS .NET.http://forums.techarena.in/customize-xp/866859.htmLouis

8 more replies
Answer Match 43.26%

I haven't downloaded this update as I have dial-up and it says 26-48 hours to update this. Also, I had to reformat my computer three times with the SP3, even downloading from disk instead of internet - so scared to download Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86 as don't want to have to reformat (and also don't want my computer running for 2-3 days to download).
Are there problems with this download like there were with SP3 (I ended up never being able to have a working computer with SP3)? Do I need this update? Will there be problems if I download from internet, and if not any other ways to update this (for free)?
Thank you.

More replies
Answer Match 43.26%

" Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86
Microsoft .NET Framework 3.5 Service Pack 1 is a full cumulative update that contains many new features building incrementally upon .NET Framework 2.0, 3.0, 3.5, and includes cumulative servicing updates to the .NET Framework 2.0 and .NET Framework 3.0 subcomponents. The .NET Framework 3.5 Family Update provides important application compatibility updates. "

Question:
After installing this, I notice from Control Panel/ Add_Remove Programs , that there are any number of previous versions of .Net Framework and similar named programs

?? How many of these must I keep ( or which may I remove ?? )

Many Thanks
 

A:Solved: Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Upd

6 more replies
Answer Match 43.26%

Im runing Windows Xp, The update

Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for .NET versions 2.0 through 3.5 (KB951847) x86

will not install. Anyone has a clue what the problem is? Thanks

A:[SOLVED] Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Up

Hi

What error is it giving?
Are you trying to install via Automatic Update?
Have you tried to download manually and install?
Microsoft .NET Framework 3.5 Service Pack 1

You can also run the .Net Framework Cleanup Tool (Direct Download) and remove .Net Framework 3.5 then try to reinstall.

You can also read this post for more troubleshooting steps.

5 more replies
Answer Match 43.26%

I have the task of resolving a .NET Framework issue on a friends HP laptop running Windows XP. It seems that whenever the system starts up, an error message is displayed as follows:

hpqthb08.exe - .NET Framework initialization error. To run this application you first must install one of the following versions of the .NET Framework: v1.1.4322

I have tried to run MS updates and they fail due to this issue and when I try to remove it from the laptop I get a query for a missing file: s867460.msp. I've tried to remove it in order to re-install it thinking that the file hpqthb08.exe is somehow corrupted. However all de-installation attempts fail seeking the location of this s867460.msp file. I cannot locate a download for this file and at the moment have no idea where to turn.

Any ideas?

- David
 

A:Solved: hpqthb08.exe .net framework initialization error .net framework: v1.1.14322

16 more replies
Answer Match 42.84%

I installed the latest updates to .NET Framework 4 and later installed software that required me to install .NET Framework 4. Would be updates still be in effect or should I install them again?

A:. NET Framework 4 updates made before Framework 4 was installed upda

It sounds like your installer was confused more than anything else - Do a manual check for updates, and if it comes up clear, then you don't need any

6 more replies
Answer Match 42.84%

I tried to install this 3X now it stays hidden.
The error just says must revert back or something.

sorry to be such a pain in the A$$

see attachments for what I have installed as programs and updates.



Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86
Installation date: ‎2/‎20/‎2009 12:44
Installation status: Failed
Error details: Code 8004100A
Update type: Important
Microsoft .NET Framework 3.5 Service Pack 1 is a full cumulative update that contains many new features building incrementally upon .NET Framework 2.0, 3.0, 3.5, and includes cumulative servicing updates to the .NET Framework 2.0 and .NET Framework 3.0 subcomponents. The .NET Framework 3.5 Family Update provides important application compatibility updates. This update is provided to you and licensed under the Windows Vista and Windows Server 2008 License Terms.
More information:
List of changes and fixed issues in the .NET Framework 3.5 Service Pack 1
Help and Support:
Microsoft Help and Support

A:can't update .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5(KB951847

Originally Posted by pacinitaly


Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x86
Installation date: ‎2/‎20/‎2009 12:44
Installation status: Failed
Error details: Code 8004100A



Hi pacinitaly,

The answer to this is to uninstall everything NET framework and then reinstall it all again have a look here for details on how to do this;
http://support.microsoft.com/kb/923100

I hope this helps

Pooch

7 more replies
Answer Match 42%

Tried everything. From adding full user control to trusted installer and creator/owner in Windows/Microsoft. net and Program Data directories to therepair service verifier, making sure virus scanner is off, fixit solutions, sfc /scannow's clean bill of health, uninstalling a few upgrades mentioned with .netframe 4.0 and 3.5 etc etc. I get a fatal error if I try to uncheck .net 3.5 (the only version I can see since all other have been uninstalled) in 'turn windows features on and off), smartmsizap, msiinv, Smart boot(cold boot? with the startup items not checked and initial boot config). I think something is wrong here with either registry or program permissions because the initial 4.5.1/4.5.2 install zips to a random c:/ directory and then it asks me to find netfx_core_x64.msi which I point to in that directory, but says it is not the netfx_core_x64.msi that came with the installation.

As of current, I do not have any working .net framework which is bad because 1) some progrmas, ie video games require it 2) my schoolwork/development environments need it for things like Git

Another weird thing is although I manually installed net framework 1.1, only 3.5 shows up in the 'turn windows features on or off' and I can't 'uncheck' it or add the sub trees underneath it. Almost like it is not there but doesn't want to install additional componenets or be completely uninstalled.

Drive files here:
https://drive.google.com/file/d/0B4-...ew?usp=sharing
https://drive.google.com/file/d/... Read more

A:0x643 .Net Framework Error... Can't install ANY net framework

BUMP please help ;(

1 more replies
Answer Match 42%

I just finished a 69mb download for .NET Framework 3.5 Service Pack 1 .NET Framework 3.5 Family Update For .NETVersions 2.0 thru 3.5. This update also added an addon in Firefox named Microsoft .NET Framework Assistant 1.0.Does anyone have any comments on whether to allow this addon or not? It can be disabled. There are 2 options in the addon. The first option is to prompt or not to prompt before running Click Once Applications. I chose PROMPT. The second option was to Report All Versions of .net or only the latest version. The default is to report onlythe latest and I left it like that. What the heck are Click Once Applications? Just a note to anyone reading this and haven't installed this month's Windows Updates. This update is notan "unattended" update for everyone. My ZA firewall asked me for permission for two different elements to access the net half way thru the install process. I also noticed even after Windows said to reboot to complete, there was still a lot of processor activity for 2 or 3 minutes.EDIT:I found the info I was looking for in Wikipedia. Anyone else interested, here is the link.http://en.wikipedia.org/wiki/ClickOnce

A:.NET Framework and Firefox Addon .NET framework Asst. 1.0

I chose not to allow it (I don't use Firefox, IE is fine with me)...I'm not crazy about unnecessary browser addons or "assistants" of any type.

I believe that these are unnecessary for anyone who knows how do the basic things on any PC, I think they are created for users who are less than knowledgeable.

Louis

1 more replies
Answer Match 42%

Ok, sunk a couple hours into what the problem is, unfortunately I cannot work out how to fix it short of reinstalling my operating system (If I take it off, I refuse to put it back on, to many headaches already).

Basically I needed to update to .net framework 4, and my system lied and said it was done successfully. I then tried to update to XNA framework 4, and got;

"The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2908"

Followed by;

"An error occurred during the installation of
assembly 'microsoft.xna.framework.avatar,fileversion="4.020823.0",version="4.0.0.00000",culture="neutral",pub licKeyToken="842CF8BE1DE50553",processorArchitecture="MSIL". Please refer to help and Support for more information. HRESULT: 0x8002802F"

Which, when I googled it, told me I wasn't alone at least.

I started looking at the 2908 error and found a few links to the Microsoft answers page, an answer and a line of people basically saying that the answer did not work. Rather than including myself in their number, I kept looking, and found the sfc/scannow command (Which refuses to run,"windows resource protection could not start the repair service"(Why don't these messages ever tell me <WHY>?)), and at Microsoft XNA Framework 4.0 problem | Terraria Online

"In the article I posted above it s... Read more

A:.net framework 4 issue causing XNA framework 4 issues

Have you see this yet ? - Possible cause of 1935 error with HRESULT 0x8002802F
Can you run a Repair of .NET 4 from Programs and Features ?

If not, suggest you contact Aaron for expert assistance.

1 more replies
Answer Match 42%

If I have .NET framework 2.0 service pack, is that the same as having .NET framework 2.0?
 

A:What is the difference between .net framework and .net framework service pack?

The service pack is a LARGE update to ".NET", just like they are to any other OS and program..
 

1 more replies
Answer Match 40.32%

Hi, im having trouble when i open some application that requires .net framework 4.5 or above on my windows XP. I read that windows XP not support that .net framework 4.5, the latest only .net framework 4.0, but is there some trick maybe the application that requires framework 4.5 can run with only framework 4.0 ??

A:is it possible that application requires framework 4.5 run with framework 4.0??

Hi and Welcome to TSF!

There's no tricking a program as it will search for the 4.5 installation files to use. .NET framework is a program that runs to help other programs function within Windows.

3 more replies
Answer Match 39.06%

Hello,

Could anyone tell me the advantages and disadvantages of disabling cache writing on the priming HDD? Thanks in advance

A:Cache Writing - Enable or not to enable?

I think the default setting is usually to enable it?

I have a dim understand of it from memory. As I recall, enabling it provides slightly faster performance but has a slight risk of data corruption in cases of a bad shutdown--like from a power outage. It can also have consequences when using RAID.

The geekiest thing to do is to enable it, but use a UPS (uninterruptible power supply) to eliminate the risk from power failure.

Me? I've always left it enabled and haven't knowingly suffered any negative consequences.

9 more replies
Answer Match 39.06%

I've recently installed a wireless lan in my office. I have Roadrunner cable coming into their router which in turn is attached to a Linksys router. I have one desktop (Dell) running XP Pro hardwire to the router. I also have a laptop and another desktop connected via wireless. I've seen all over the place that you should not enable file sharing. So, how do you allow acces from one computer to another. I've set them all up on the same workgroup.....what am I missing? I've been able to send print from the wireless laptop to the printer attached to the wireless desktop. It's just the folders I'm having problems accessing.
Any and all help would be greatly appreciated.
 

A:To enable or not to enable (file sharing that is)

Where exactly have "I've seen all over the place that you should not enable file sharing".

If you don't that is fine. But then you can't share files. Just a choice to make.

With a router you should be reasonably protected.
 

3 more replies
Answer Match 38.22%

I have to install an application for a job and when I run it, .NET Framework 3.0 is installed first , but it fails giving a 1603 error.

I tried changing the Permissions from this key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Security\ServiceModel 3.0.0.0 to allow Everyone.

I made sure no firewall or other registry program was running.

I also downloaded an application called Error Fixer, or MS-Fixer or something like that, which I read about on these fora, but that didn't work either. It only prompted me to buy if I wanted it to do something.

I also tried to open the exe file using 7-Zip, so I could manually install .NET Framework 3.5 (already installed) and the actual program I want. But that didn't work either.

I don't know what else to do, since the problem is the version of Framework that comes with my application.

Any help? I have Vista Home Edition 32.
 

A:Error 1603: Error Installing .NET Framework 3.0 (Framework is part of another app)

15 more replies
Answer Match 37.38%

OK, I do understand that some software is designed to work with a specific version of .NET, and that one attempting to interface with .NET might not work if the version is newer than expected. But c'mon... how many programs are out there using .NET framework 2.0? Is it really necessary to have it installed? I can understand version 3.5, but 2.0 seems like really old hat...

More replies
Answer Match 36.12%

Ok so I have had the google redirect virus. I have been fighting it and the internet has worked until i followed a tutorial on fixing the virus that involved editing my host file. after that the internet stopped working.

I reset my host file to the original state but the internet still hasnt been working. When I run ipconfig /all in cmd it says DHCP Enabled: no.

I went to the the control panel and have both TCP/IPv6 and TCP/IPv4 settings set to automatic but this doesnt change the state of my dhcp. I have tried winsock and resetlog.txt but no luck.

I do not think this is related the the virus because it only spammed my internet. I think this is because of the changes I made in the attempt to fix the problem.

I am running windows 7 and I am posting this on a laptop since I cannot access internet via the suspect computer. Thanks in advance.
 

A:DHCP enable no, cant enable

16 more replies
Answer Match 34.44%

Hi

I have configured ad-hoc network for internet sharing from my PC. Normally I start it by
netsh wlan start hostednetwork
As I noticed the hotspot is automatically turned off when I turn off WiFi adapter. So I have two questions:

How do I turn on WiFi by command line, so that I can control it from various commandline scripts?
How do I configure the script for WiFi for autostarting hotspot whenever WiFi is turned on?

netsh wlan ...

A:How to turn on WiFi adapter from command line / How to turn on hotspot

  
Quote: Originally Posted by Anakunda


Hi

I have configured ad-hoc network for internet sharing from my PC. Normally I start it by
netsh wlan start hostednetwork
As I noticed the hotspot is automatically turned off when I turn off WiFi adapter. So I have two questions:

How do I turn on WiFi by command line, so that I can control it from various commandline scripts?
How do I configure the script for WiFi for autostarting hotspot whenever WiFi is turned on?

netsh wlan ...


Ad-Hoc requires that you restart the session each time.

Connectify pro has an auto start option that does this but it's a paid version, connectify lite is free but I'm not sure if has auto start.

Download - Connectify

8 more replies
Answer Match 34.44%

I have a bit of a strange issue with my computer. Forgive me if I'm a little too descriptive, but I'm not sure which details are relevant and which are not for such a problem. First, the specs:

Model: eMachines T2984
Operating System: Windows XP Service Pack 2
Processor: Intel Celeron D Processor 340, 2.93 GHZ, 256K L2 Cache, 533 MHZ FSB
Power Supply Unit: Bestec Model: ATX-250-12E REV: P7
Motherboard: I can't tell, but it appears to be an Intel motherboard by the number of Intel labels on it
RAM: 512 MB DDR SD originally, added 1 GB a couple of months ago
Let me know if you need anything else...

Yesterday, I got home from shopping around 1PM, and I tried to start the computer. I pushed the power button, and nothing happened. I checked all of the cords, and they were all plugged in. Not knowing what else to do, I opened up the case to see if there was something obviously wrong. The only thing that I noticed (other than a bunch of dust) was that the power supply unit was still hot. I shut the computer down about 5 hours earlier after about 20 minutes of use, so it seemed strange that the power supply was still hot. I unplugged the computer just in case there was some sort of fire hazard.

At this point, I called a friend who suggested that the problem might be with the motherboard or the power supply unit.

A few hours later, I plugged it back in to try to get it to work. As soon as I plugged it in, the entire unit suddenly started "running" by itsel... Read more

A:Computer Doesn't Turn on, Fans and Some Lights Turn on Automatically

I would suspect that the Power Supply Unit (PSU) is going south. If you have a spare one laying around, install it and see if the problem goes away.
You can buy a new,better PSU from Newegg for about $40.00. I have used a Thermaltake 430 watt in one of my machines for some time now and it works well.
You will have to check the size of your PSU to be sure a new one will fit into the eMachine.
Here's the page with that PSU on it. It's the last one on the list.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2010320058+50001379&name=Thermaltake
 

3 more replies
Answer Match 34.44%

Running Windows Vista Ultimate.

Display turns off after about fifteen minutes regardless of whether I am actively using the computer or not. The only way to turn the display back on is to close and then open the lid. This disconnets me from AOL, so I have to sign back on again, and if I was emailing, I might lose my current email.

Under Power Options, I have 'Turn off the display' set to Never for both On Battery and Plugged in. Under 'Put the computer to sleep' I have both On battery and Plugged in set to never. Nonetheless, the display still shuts off while I am working.

What do I need to do to prevent the display from turning off at odd intervals?

A:Vista Ultimate x64: turn off display, will not turn back on

sounds like your display drivers are crashing.

Do not rely on windows update drivers - go to graphics chipset manufacturer website and get latest drivers

6 more replies
Answer Match 34.44%

Hi to all Eight forum.
I m here with a strange problem, it happens from yesterday, the problem is when I playing games on my Dell inspiron N4050 and then the main power where the charger pluged in is turn off (it is the most problem in my country that there is heavy short fall of power), the laptop is remain ON just for 2 or 3 seconds and then its suddenly OFF. its not happening before, why is that,? why is the laptop didn't get power from the battery.?
.
when not playing games. and the main power (electricity) is gone, then this problem is not occurred.
plz understand my problem and reply me.
sorry for my bad English.

A:Laptop suddenly turn off when main power turn off.

Could it be overheating protection?

16 more replies
Answer Match 34.44%

Wife updated Norton twice and had two Norton Firewalls and Windows Firewalls running together. Paid twice for the 2 updates. Removed Norton Completely and then re-installed Norton 360 Security Version 5, but am still unable to turn off Windows Firewall under Windows XP Pro and also cannot turn on Automatic updates, getting message "we're Sorry, the Security Center could NOT change your Automatic Windows Update setting. To try changing these settings, go to SYSTEM in Control Panel. On the Automatic Updates Tab, select AUTOMATIC (recommended) and then click OK. None of this works, then tried using an app to reset Security Settings and that didn't work either. Any suggestions on what I try next. I would like to reinstall Norton 360 Internet Security Version 5, I know there are those out there that hate Norton and the overhead that comes with it, but over the years I've gotten used to it and I like it very much. Thank you, PhotoRay

A:In XP Pro can't turn off Windows Firewall or Turn on Automatic Updates

How did you remove Norton in the first place?

3 more replies
Answer Match 34.44%

This is driving me crazy. My HP has Windows 7 and everytime it connects to the internet (wireless connection) Windows Live Messenger opens down in the left hand corner taskbar near the start menu. I close it, and fifteen minutes later it will open again.
I opened the options and unchecked the boxes pretaining to 'Run Windows Live Messenger when windows starts' but it still repeatedly opens. I use hotmail, but i really have no use for Messenger. The program is not listed under add/remove programs. Someone please help me turn this thing off.
 

A:Solved: Windows Live Messenger-TURN IT OFF TURN IT OFF!

It should be listed in Programs & Features under Windows Live Messenger or Windows Live Essentials. If you still can't find it listed then go to get.live.com and re-download the installer, reinstall it, then uninstall it.
 

2 more replies
Answer Match 34.44%

I just put together my first computer 6 months ago. It abruply shutdow in the middle of writing a paper for school. I couldn't turn it back on right away. after trying a few times, it turned on. All the fans are working even the fan on the power supply, the motherboards lights are on. My graphic card in on the motherboard. I think it might be my power supply because when I first put it together I didn't plug in the smaller power connection to the motherboard and the same thing is happening, black screen. It's like my computer isn't giving my monitor any feed. I will have more info when I get home. I can't get in to bios or safe mode.
 

More replies
Answer Match 34.44%

I can't turn my computer on. The fans and lights turn on for a second and then turn off. a few seconds later they'll turn back on and then turn back off. I've had this computer for 4+ months now, i built it myself. it recently started doing this but i'd just turn off the PSU (Power Supply Unit) and turn it back on and it woould fix it. now it doesnt fix it anymore. i've re-slotted the RAM (Random Access Memory) and pushed it in firmly, but that hasn't done anything. i've tried different power outlets and pushed everything into the MOBO (Motherboard), i havent messed around with CPU (Processor) because that's just a pain in the a**... i was wondering if there was anything else i could do before having to take it into a local repair shop, lol.

as for my computer specs

CPU (Processor): Fx-6300 AMD
GPU: R9-270x AMD
RAM (Random Access Memory): 8GB Ballistix sport
MOBO (Motherboard): ASRock 970 Extreme3 R2.0
PSU (Power Supply Unit): Corsair X500 w 80+
Case: Rosewill GALAXY

thanks
 

A:Fans turn on, lights blink and then turn off/on repeatedly.

First, I would unplug everything that isn't necessary. Everything external except for the keyboard and monitor. Internally, just leave the CPU, RAM and video card installed. See if it turns on. If not, you might try and test the power button. Disconnect the power button from the mobo. If the pin headers allow for it, use the reset button as the power button. If not, you can use a flat head screwdriver to power on the computer (cross the two pins for the power button with the blade of the screwdriver). If you do this, just be very careful. Touch only the power button pins and nothing else! You could easily damage components by touching the screwdriver to the wrong thing.

Some motherboards have a power button right on the board that you can press to power on the computer. I looked at a pic of your board and didn't notice one.

If that doesn't do it, plug the power button back in. You might try and play around with the RAM. I don't know if you have 2 or 4 sticks of RAM, but try and boot the computer with only one stick of RAM at a time. If there's a bad stick, you'll find it through this process of elimination.

If none of the above works, then it might be a bad PSU.
 

1 more replies
Answer Match 34.44%

Hello Folks,

I'm not sure if my issue is with hardware (possibly MB?) or graphics card, so please forgive me if I've posted in the wrong section. The first problem I was having was random blue screens of death that displayed graphic card driver issues. I was able to remedy that by updating my graphic drivers and have not had an issue since.

However, ever since then I have been running into another hardware or graphics-related issue that is random and completely stumping me. What is happening is, I will be on my computer, leave and turn my monitor off, and (randomly) when I come back to use my computer again, when I turn on the monitor there is no signal and a black screen (e.g. when I turn my monitor on my desktop will pop up and the light on my monitor will turn blue, when it doesn't turn on there will be a black screen and the light on the monitor stays yellow as if it is idle). I have tried swapping out the monitor to see if that was the issue and the same problem persists, so it does not appear to be my monitor or VGA cables.

The only way I can temporarily fix this issue is to reboot/restart my computer and viola! The monitor works again and I can see everything. This issue is very random. Sometimes I can go weeks without an incident, other times this is happening a couple times a week. I honestly don't know if it's my motherboard or video card or what. My PC isn't overheating, I'm not overclocking, and all of my drivers are updated.

I'm not sure what... Read more

A:Turn Off Monitor, Turn On Later and Black Screen, PC Still Running

try checking your power options settings and set it to high performance then check in advanced power settings and do not allow hard disks to sleep

1 more replies
Answer Match 34.44%

Hi!
I have this issue that when I turn on my computer, the power LED does not turn on but you can hear the fans working properly. I don't the issue and I'm not much of an expert with computers. Please help me solve this issue because I'm completely clueless.
 

A:Try to turn on my computer but only the fans work and the power led does not turn on

How old is the computer, what was the last change you made to the computer and when you last shut it down did it shut down correctly?
 

3 more replies
Answer Match 34.44%

Hi All,
 
I am using Windows 8.1 and had to refresh my computer as I was experiencing some problems. Everything seemed to be normal so I started slowly installing the programs I had before. Now a few days after, I find that my wireless device is Off and Flight Mode is On. I have been in settings but the relevant switches are disabled.
Can anybody tell me how to fix this please ? I really don't know how it happened. Can it be that my laptop is still infected ?
 
Thanks,
Robert

A:Turn Off Flight Mode & Turn On Wireless Devices

Is there a physical switch on your laptop for wireless? Often on the edges of your laptop... easy to miss.

7 more replies
Answer Match 34.44%

Hello Microsoft team,
We need for an application to unplug and replug usb3 - not physically but with a program.
We checked a lot on the internet but did not find answer how to do it in windows 8.1 pro (in c++).
We know that hibernation creates something alike, but how can we only turn down the power of usb3 and return the power back on back via program (in c++).
Thank you for your help.

More replies
Answer Match 33.6%

HI TO ALL:
im having a problem with my pc that i mostly used..heres the situation :
my pc is working fine suddenly 1 day it slows and slightly hanging so i restarted it after restart problem occurs it powers on(all running: fans,hdd,dvd rom,cpu fan)then after 2 seconds it goes off automatically.so then i open the case and reseated all components(i know some basic troubleshooting) i tried to power on again and same things happen turn off after 2 seconds. i remove the gpu and connect my monitor to the onboard, so it starts finally and get me to "loading windows "then it go black screen, i restart it again by pressing the restart button and i boot trough enable vga mode by pressing f8.then it boots and it loads the windows and i can use it normally only on vga mode..so i downloaded the latest driver of my gpu's onboard and external.i uninstalled the drivers through vga mode then restart,again loading windows then black screen,restart againd and boot through vga mode install the updated drivers then reboot,loading windows then black screen with some pixelate flickering cursor on screen. (to make it short it only boots on enable vga mode..then i go replacing my psu with working from another pc and same thing happened..so then i reformat my pc and didnt installed any gpu including the onboard i disabled it..and its working fine with that..

note* with my external gpu installed it goes off after 2 seconds it power on.
with my onboard gpu enabled it gives black screen ... Read more

A:Pc turn on and immediately turn off after 2 seconds(with external gpu)

10 more replies
Answer Match 33.6%

I want to discontinue use of McAfee (which came with the initial install) of my Windows 10 computer, and turn on Windows Defender.   I don't know where to start.

A:turn off mcafee and turn on defender in windows 10

Open the start menu. Select  "Control Panel". Select "Programs and Features". Find and select the McAfee program in the list then click "uninstall" at the top of the list. When it has finished uninstalling Windows Defender will activate itself.Go back to Control Panel again and select  "Security and Maintenance" . In the security drop down list it should say Windows Defender is turned on.

3 more replies
Answer Match 32.34%

My HP pavilion refused to turn on in the morning after charged last night. The charging indicator light used came up at first but now nothing is working. I used working chargers and batteries from HP pavilion, still nothing. I removed the battery push the power button for a minute the fix the battery and on. Nothing. I used ram from other pavilion, still nothing. Please I need your help

More replies
Answer Match 32.34%

after serching all night to find out why his computer is in limbo, i leave my brother's house without finding needed help. his computer won't turn off...the fan, a couple little lights until he unplugs it from the wall. first, the computer did a restart all by itself, he said, then it would not turn on, except the fan and little lights inside that won't turn off. he took out the hard drive and it functions in his other computer...he puts the hard drive back into the new computer and it will not turn on or completely turn off that fan. he tried the "hold the on/off button for at least five seconds" step and nothing changes. he has had the computer for a year and a half, so he really wants to figure this out. how can he even get it to turn on so he could do a safe start up? so far we cannot find a way to troubleshoot. he have checked the cords, perhaps there was a freeze up that began this loop and that's why the fan stays on? please say this is something you have heard of and there may be a solution. the advice we have found usually goes back to buying a new computer. thanks in advance, tea
 

A:what's a girl to do when her computer won't turn off, or turn on?

Welcome to TechSpot

I'd unplug all drives and add-on cards (such as soundcard if there is one), and try booting then.
 

3 more replies
Answer Match 32.34%

why my hp x360 turn off  without warning and turn on again it turn off without warning and them turn on again?

More replies
Answer Match 32.34%

Hey all I'm new to this forum but I've built a few computers in the past but have never experienced any problems like this.

Case: Powerspec Cooler master case
Processor: Intel i5 750(quad core)
Motherboard: Gigabyte H55M-UD2H
Powersupply:OCZ 500 watt Mod X Stream-Pro

Here are some pictures of my build and a video of what is going on.

Video: youtube.com/watch?v=UbuFZJQnlds

As you can see the PSU, CPU, and Case fans are turning on and the Motherboard LED lights are blinking and then they quickly turn off. I dont think its a problem with the Power Supply because I have already returned one with the same issue thinking it was defective.

Pictures:

wont let me post pictures =/

Any help is appreciated, thanks for your time!
 

A:CPU and PSU fans turn on but then quickly turn off as does everything else

Does your current BIOS version support your CPU?

Your 4 pin power connector looks to be missing.... Top right of the video 8secs in.
 

14 more replies
Answer Match 32.34%

Hello  i am writing my  mother laptop for some reason it acting very odd brand new not even few months old  Ok yesterday her laptop she could shut it down with no problem this morning she going out she turn it off bout close it.. but it decided turn back on not going thru booting it up with hp Icon no went straight away to windows 10 automaticaly.  So i decided to check some program see if anything conflicting it nothing  so i decided to shut it down thru windows 10  power shutdown but still turn back on..  i shut down it with power button but even still turn back on please help me   

More replies
Answer Match 32.34%

Hello everyone, I have an HP Envy j100t which I purchased in 2014. ever since yesterday it's been starting but the screen remains pitch black, no display at all. It won't get to start up page, just remains a blank dark screen even though the power light is on and there's no battery issue because it was on charge all night and the AC adopter is still in.   I keep on having to get to get to the BIOS recovery screen, letting that update, and then it proceeds to restart. However when it restarts, it never gets to start up and there is the same dark screen- no display.  I have to always update BIOS, take out the battery and AC adapter, put them back in, and then it will start. Or sometimes even that whole process might not restart it.  Please help!

More replies
Answer Match 32.34%

If I turn the laptop off and back on again, like next morning etc the dongle doesn't connect to the internet, but if i then restart it, the dongle connects.

Why is this? anything else I can do?

More replies
Answer Match 31.08%

Windows Vista Home Premium, How can I turn off group policy, If I try to run defender or change startup programs, it will not allow me. Message to contact your system administrator to turn off group policy.  Please help

More replies
Answer Match 30.66%

Hi,

I've set Turn off the display setting in my power plan to 15 minutes and my monitor does turn off after that period (sometimes it doesn't!), but then, sometimes, it turns ON by itself after few minutes.

I've been Google-ing these days trying to find some solution and I came across suggestions which recommends that Allow this device to wake the computer option, located in the Power management tab, in the Properties window of the network adapter, in the Device manager, should be disabled. Also, there were suggestions that Wake on Magic packet property in the Advanced tab should be disabled, too. Unfortunately, all that did not work in my case.

Does somebody know what can cause this problem? Has anyone ever encountered such phenomena?

Thanks in advance.

A:Monitor turn on by itself after "Turn off the display" starts

Hello alokin87 & welcome to Sevenforums,

Sometimes the computer Wake from standby because of a program's updating itself. Sometimes it does wake, sometimes it does not!

Therefore it could be the Windows Media center as explained in this Hotfix from MS. You could give a try:

http://www.sevenforums.com/windows-u...ly-2010-a.html

Look at post #1:

"-Do you find that your Windows 7 Computer wakes up from sleep unexpectedly at a particular time every day? If so then you might to check up if any scheduled tasks are waking your PC up."

8 more replies
Answer Match 30.66%

How to turn windows firewall off? I can't click the Turn Windows Firewall On or Off

A:How to turn windows firewall off? I can't click the Turn Windows Firew

This may have been disabled on your computer, particularly if you are in a Domain (e.g.: at work, in a library, etc).

However assuming that you have Administrator rights to your computer you should be able to turn it on and off by going to Start > Control Panel > Windows Firewall > Turn Windows Firewall on or off.

If you cannot turn the Firewall off through the above approach try the following Start > Control Panel > Administrative Tools > Services

Looks for the 'Windows Firewall' Service, double click it, then click on 'Stop'.

From within the Service properties you can also stop the Firewall from starting with Windows, etc.

2 more replies
Answer Match 30.66%

Dell Dimension 4100 PIII 866 MHz, XP Pro, NViIDIA GeForce MX 440

This is my problem: I have the power saving settings set to turn off my monitor after 20 min. It does briefly turn off, only to turn on again 1 sec. later, displaying a faint very dark blue screen... It used turn off fine, but after upgrading from Windows 98SE to XP Pro I got this problem. Is this the OS or my video card?

Any clues?

Thanks all
 

A:"Turn monitor off" setting doesn't really turn off

Did you upgrade to XP right over the top of 98 or was it a clean install? If you did an upgrade over the top of 98 (and I know you don't want to hear this lol) then you should format and do a clean install. Upgrades rarely leave you with a stable system.

Things to try before you do that though:

1) Make sure your video card drivers are up to date.

2) Make sure Windows is updated - go to windowsupdate

3) try the system file checker (Start, Run, "sfc /scannow" [without the quotes]) to make sure your system files are intact.

Other than that I would say just do a format and install XP from scratch (to be honest, you should do this anyway if you haven't already, you'll get much better stability and performance).

Prime
 

2 more replies
Answer Match 30.24%

Well i am going to start using .NET Framework for C++ programming soes anyone really know of any websites that give tutorials on the basics of .NET and the no so basics? google didn't really help me much.
 

A:.NET Framework

you could try this

http://www.cplusplus.com/doc/tutorial/
 

1 more replies
Answer Match 30.24%

Well, I've wandered around my computer's innards as best I can, but I can't find any sign of .NET Framework. I know it's installed since I have a couple of apps that wouldn't run without it, but I just can't find it, and it doesn't show up by that name in my Belarc report, either.

I need the version number because I'd like to download a large program that requires version 3.0. Being on slow dialup, I try not to download large files unless I know I can use them. Can anyone help me find the number?

A:.net Framework

Well, I wonder if I haven't just answered my own question. I found it in the add/remove panel as version 1.1. But what confuses me, since I have Vista Home Premium is this comment that I found in the Overview of version 3.0 on this page at Microsoft:.NET Framework 3.0"The .NET Framework 3.0 is included as part of the Windows Vista? operating system; you can install it or uninstall it using Windows Features Control Panel."Huh?

9 more replies
Answer Match 30.24%

I just downloaded the setup file (dotNetFx35setup.exe) from Microsoft. This program is supposed to install Microsoft .NET Framework 3.5 which, according to Western Digital, is one of the programs required in order to setup and run their backup program which came with a 500 MB My Passport external hard drive. I had no problem downloading the setup file. I then proceeded to run the setup file. Everything went fine until the very end when a single error message "Setup Error" appeared in the setup window. That was it; no further explanation, nothing. Does anyone know what I have to do to get this program installed?

A:.NET Framework 3.5

Try it again, if you still have problems, try this: installing .net framework 3.5 sp1 setup error : The Official Microsoft ASP.NET Forums

3 more replies
Answer Match 30.24%

I can't install .NET Framework 3.5 SP1 because of this:

Code:
[10/09/08,17:24:17] Microsoft .NET Framework 2.0SP1 (CBS): [2] Error: Installation failed for component Microsoft .NET Framework 2.0SP1 (CBS). MSI returned error code 1060
[10/09/08,17:24:18] WapUI: [2] DepCheck indicates Microsoft .NET Framework 2.0SP1 (CBS) is not installed.
But when I downloaded and tried installing .NET Framework 2.0SP1 I've got this error:

Code:
This product is not supported on Vista Operating System.
What should I do?

A:.NET Framework 3.5 SP1

Maybe this help you:
Aaron Ruckman's Web Log : When installing .NET Framework 3.5 on Vista what does the .NET Framework 2.0 SP1 on Vista error code 1058 mean and how do I work around it?

Check do you have:
Cryptographic Services is turned on
Windows Update is turned on

2 more replies
Answer Match 30.24%

I am a junior computer science major, and I am trying to learn C#. I have run into a problem with regards to compiling. I typed in this command exactly:
csc /nologo /out:hello.exe hello.cs
I try typing this command into the command prompt, but it does not recognize csc. I have .Net 1.1, so I am out of ideas as to what is wrong. Any help would be appreciated.

More replies
Answer Match 30.24%

My Quicklaucher won't install because it says I need .Net Framework 1.1.4322. Can someone please send me a link to this download or a link to .Net Framework 2.0?

Thank you
 

A:.Net Framework

12 more replies
Answer Match 30.24%

is this neccessary to install after SP2 has been uploaded. and what exactly is this?

A:XP .NET Framework

Read this info http://msdn.microsoft.com/netframewo.../framework1_1/. Hope it helps

4 more replies
Answer Match 30.24%

Why does every update related to the .NET framework take 17 billion years to install on windows xp?

A:Why does .net framework?

I didn't know 17 billion years passed, I just thought it was a millennium?
Are you just complaining, or do you have a problem installing .Net Framework? and if so, which one?

10 more replies
Answer Match 30.24%

This file confuses me. In my Add/remove section I see quite a few of them...most of them seem to have SP1 after them. I do see one that is 3.5 version? Does that one mean its the latest and is referred to SP3? How come I never see one that has SP3 next to it and do I need it anyway? What is the purpose of this file ?

A:Net framework

Net framework builds on itself so later versions depend on earlier ones. Just keep your Windows Updates active and Net Framework will take care of itself. For a decent definition see: .NET Framework - Wikipedia, the free encyclopedia

1 more replies
Answer Match 30.24%

Hi All
Running Win xp home edition
I have MS net framework version 1.1- hot fix 1.1 version-2.0-3.0.
Do I need one of them all of them?
No games installed.
As always Thank You
 

A:ms net framework why?

From what I have found most anything that runs on Net Framework 1.1 will run on Net Framework 2. If you uninstall Net Framework 1.1 and later have issues, you can always reinstall it.
 

1 more replies
Answer Match 30.24%

I Installed the Microsoft .NET Framework because it was listed as a high priority update and it appears that Windows Cardspace was installed with it. Windows Cardspace shows up in control panel as a vertical file such as are in Windows Vista. Also cardspace freezes the computer and keeps it from restarting. Should I uninstall the .NET framework 3.0?
The freezing and restarting problems only happens when I'm trying to use cardspace(actually cardspace never loads.)
Another thought-I've seen links to windows xp help forums off the microsoft website but now I can't find them. Does anyone else know where they are?
 

A:MS .NET Framework 3.0

7 more replies
Answer Match 30.24%

After recent reinstallation of Dell Dimension 4400XP SP2 there are at least 12 updates for .NET Framework totaling about 500 MB. I don't set up web pages or play anything but card games. I mostly do email, use Word 2002 and PictureIt, and do some research on line--a home computer.Question is: Do I need NET framework 1.1, 2.0 & 3 & updates?bobcatswinEdit: Moved topic from Introductions to the more appropriate forum. ~ Animal

A:Net Framework

You won't need it until a program that you use asks for it. So I'd leave it alone for now (but expect to download it in the future).

1 more replies
Answer Match 30.24%

Hi folks

I currently have no .net framework installed on this new installation of XP, an application I am going to install requires it. I notice on MS update page there are 3 flavors to choose from. 1, 2 and 3, so my question is, do I just get the latest version 3 or do I need the others too, are they culmulative?

regards
Jack
 

More replies
Answer Match 30.24%

Exe (C:\Users\Yakey\AppData\Local\Temp\Microsoft .NET Framework 4 Setup_4.0.30319\Windows6.0-KB956250-v6001-x64.msu) failed with 0x424 - The specified service does not exist as an installed service. .
[8/21/2011, 21:33:18]PerformOperation on exe returned exit code 1060 (translates to HRESULT = 0x424)
[8/21/2011, 21:33:18] Action complete

[8/21/2011, 21:33:18]Error 0x424 is mapped to Custom Error:
[8/21/2011, 21:33:18]OnFailureBehavior for this item is to Rollback.
[8/21/2011, 21:33:18] Action: Performing actions on all Items...
[8/21/2011, 21:33:18] Action complete

[8/21/2011, 21:33:18] Action complete

[8/21/2011, 21:33:18]Final Result: Installation failed with error code: (0x00000424), "The specified service does not exist as an installed service. " (Elapsed time: 0 00:00:12).
[8/21/2011, 21:33:28]WM_ACTIVATEAPP: Focus stealer's windows WAS visible, NOT taking back focus





what the hell is this...

A:.net framework 4

.net installation blocked when it tried to upgrade via windows update (0x00000424)

Try this Description of the Windows Update Stand-alone Installer &#40;Wusa.exe&#41; and of.msu files in Windows Vista, Windows 7, Windows Server 2008 and in Windows Server 2008 R2

2 more replies
Answer Match 30.24%

For the past several days, MS has been downloading and trying/failing to install their MS NETframework 3.0 service pack1 (KB959300) update. can anyone tell me what to do so it can go ahead and install?
Thanks in advance for whatever you can suggest to solve this challenge.
Vicks
 

A:MS NET framework 3.0

7 more replies
Answer Match 30.24%

Hi, I have to use turbotax, which was working, but now is not launching. I narrowed the problem down to the framework 2.0 which for some reason won'r lwt mew unistall it or fix it. I know it is corrupt, but I can't fix it. Can anyone help? I have tried what Microsoft has said to do, but it still doesn't seem to work. Thanks for any help. I have windows xp. Oh, I can't even update to 3.0 either.
 

More replies
Answer Match 30.24%

Hello Good People With All The Answers:

I have a couple of questions regarding installed apps. Do I require Visual C++ redistributable or NET framework for Vista to function properly or are these simply for developers? If I don't require them I will quit installing all the updates and service packs for them.
Thanks in advance for your replies which I know will answer my questions.

Regards
Powell Lucas

A:NET framework

Lucas
It is not needed for the OS, but programs that you have installed may be dependent on Framework.
http://askville.amazon.com/average-u...uestId=5096562

5 more replies
Answer Match 30.24%

Getting an error message when trying to install Net Framework 2.0. I need that to be able to install my Canon Camera Software.
 

A:Net Framework 2.0

What error message are you getting?

Look in Add/Remove programs, what versions of .NET Framework do you have installed now? (There could be several)

Which version of Windows do you have?
 

2 more replies
Answer Match 30.24%

I have Windows XP Home Edition Version 2002; Service Pack 2; Pentium 4; 496 MB. I went into my add/remove programs and I have Microsoft .NET Framework 1.1 (and its Hotfix). Now, I am trying to understand what the .NET Framework 2.0 and 3.0 are for. Which version of the .NET Framework should I have. Tried to google it to try to understand, but was very confused.
 

A:.NET Framework

8 more replies
Answer Match 30.24%

Hi
I want to install sqlexpress which needs at least .net 2 SP2. So I removed my previosly installed Visual Studio 2003 and tried to install NET 3.5.

No success....is there any way to install ANY .NET framework on Vista 64?

Thanks
Michael

A:NET framework

Originally Posted by mickthebike


Hi
I want to install sqlexpress which needs at least .net 2 SP2. So I removed my previosly installed Visual Studio 2003 and tried to install NET 3.5.

No success....is there any way to install ANY .NET framework on Vista 64?

Thanks
Michael



Michael net framework should already be installed in vista. what service pack does you vista has applied to it?

5 more replies
Answer Match 30.24%

I've spent all day trying to install dot net framework 1.1 on my system, which is necessary to run old programs with. It's obviously not compatable with the new Vista. These are the following things I have tried all day until my brain has broken:

I followed these instructions innumerous times, and when I attempt to install using Admin/Command Prompt, it tells me that the commands given here (and at every other place that has pointed me there, which are many!) are invalid commands. It won't allow me to delete the ">" after my name in order to put in the commands, or change anything. I've tried the commands in many different orders, and other commands, to no avail.

I followed these instructions as well, which didn't do a bloody thing.

Finally, tonight I followed these instructions, and have run into the same issue when attempting to install v. 1.0 and 1.1, which is that they're not compatable with Vista. (This also has left me with NO framework as I write this post.)

Now, I know I've done this before and installed dot net framework 1.1 just fine in the past, but I can't recall exactly what I did, but it was similar to along the lines of the first link's instructions. So why I'm having problems now is beyond me. Dot net framework 1.1 is very important to what I need to do, and I would really really appreciate if someone could help me before I poke my eyes out in frustration over this!

Installing dot net framework 1.1 for dummies on Vista?

Thank you!

A:Net Framework 1.1

At this point I don't think you could hurt anything by trying the .NET 2.0 runtime:

http://www.microsoft.com/downloads/d...displaylang=en

9 more replies
Answer Match 30.24%

When I boot up my laptop with WIN7, I continuously get a message telling me that I need to download MS net Framework 2.0 when in fact 3.5 is on the machine. Can someone tell me how to eliminate this boot up message. Thank you in advance.

A:MS net Framework

If I am not mistaken, 3.5 is an upgrade but still needs 2.0 under it. Just download the 2.0 as requested and you should be good to go. Let us know how you make out.
Cheers
JohnnyA

5 more replies
Answer Match 30.24%

Does any one know any good download links for all the net framework's.

It seems my updates did not include them in windows 7.

May be a link to where i can download all i need.
 

More replies
Answer Match 30.24%

In my Add or Remove Programs, I can see both .NET Framework 2.0 and 3.0. Should I, and can I remove the older version 2.0, without any complications?
 

A:.NET Framework?

7 more replies
Answer Match 30.24%

hey guys,
I have a mac osx and I need a program installed but my mac doesnt have the .net framework. I tried installing a virtual pc but when I downloaded the windows p from a torrent It couldnt install. Im really lost and Have no idea what to do because I am not veyr good at these things. can somebody please advice me
 

A:how do I run .net framework on mac??

You can use boot camp to install both Windows and Mac, then install the .Net framework onto the Windows side. Also downloading Windows Xp using torrents, or any other similar method is illegal and against the rules here.
 

2 more replies
Answer Match 30.24%

I own a Dell Dimension and was told to update my .Net Framework to 2.0.

I run XP Professional and MS Office and Outlk. I don't do gaming, video, music, etc.

Is it important for me to upgrade to the current 3.0 release level? If so why?

Thanks.

carmody
 

A:.Net Framework 2.0

8 more replies
Answer Match 30.24%

Sir,
I am using windows 7 Pro. 64 bit. I want to install .net framework 4.0 but Installation not success.
In my windows have installed a .net framework 3.5.1
when I try to install .net frame work 4.0 massage shown as bellow:
.net framework 4 has not been installed because:
the specified service dose not exist as an installed service. 

Please help me

More replies
Answer Match 30.24%

I am trying to install the 4od program for to download tv programs, when I am going through the instalation process, it keeps telling me that I need net. framework 2.0. I have checked out the other postings on the forums and have tried to install 2.0 to be told I need XP sp2 I then installed net framework 3.0 and run the installer to be told the same that I need 2.0....any ideas???.....Thanx in advance
 

More replies
Answer Match 30.24%

I am trying to install the 4od program for to download tv programs, when I am going through the instalation process, it keeps telling me that I need net. framework 2.0. I have checked out the other postings on the forums and have tried to install 2.0 to be told I need XP sp2 I then installed net framework 3.0 and run the installer to be told the same that I need 2.0....any ideas???.....Thanx in advance
 

A:Net Framework 2.0

9 more replies
Answer Match 30.24%

what is .net framework? i went to the windows update site, and it shows this as an update i can choose, but i don't want to install something i don't need.......
 

A:.net framework???

9 more replies
Answer Match 30.24%

Just bought this machine, Acer aspire, windows 8.1 and among the updates there are 24 for Net framework, are these needed.

Thanks
 

A:net framework ??

I would say yes, there are a lot of third party programs that are using it.
 

1 more replies
Answer Match 30.24%

i tried uninstalling it but i keep getting this popup:

Windows installer

this action is only valid for products that are installed

i translated from norwegian. hope it makes any sense

A:.net framework 1.1

Have you followed this procedure to uninstall? http://support.microsoft.com/kb/320112

3 more replies
Answer Match 30.24%

Am trying to install 3.5 .net framework on my xp computer. below are some screenshots that it gives me. Also a log file of the errors. one line in particular gives a path to my backup drive when it should be my C drive. Looks like the registry has the wrong path and don't know where to find it to fix. F is my backup drive.

Log file

[01/20/09,10:37:47] MSITOSIT: [2] CRootComponent::SetManager() - The Windows Installer package:
f:\427b8b3eaa22006d042bef\vs_setup.ms_
could not be opened.

Choose Retry to try again. Choose Cancel for exit setup.
[01/20/09,10:39:41] MSITOSIT: [2] CRootComponent::SetManager() - The Windows Installer package:
f:\427b8b3eaa22006d042bef\vs_setup.ms_
could not be opened.

Choose Retry to try again. Choose Cancel for exit setup.
[01/20/09,10:39:43] MSITOSIT: [2] CRootComponent::SetManager() - The Windows Installer package:
f:\427b8b3eaa22006d042bef\vs_setup.ms_
could not be opened.

Choose Retry to try again. Choose Cancel for exit setup.
[01/20/09,10:39:45] MSITOSIT: [2] CRootComponent::SetManager() - The Windows Installer package:
f:\427b8b3eaa22006d042bef\vs_setup.ms_
could not be opened.

Choose Retry to try again. Choose Cancel for exit setup.
[01/20/09,10:39:48] MSITOSIT: [2] CRootComponent::SetManager() - The Windows Installer package:
f:\427b8b3eaa22006d042bef\vs_setup.ms_
could not be opened.

Choose Retry to try again. Choose Cancel for exit setup.
[01/20/09,10:39:50] setup.exe: [2] ISetupModule::SetManager() failed in ISetupManager::Lo... Read more

A:.net framework

9 more replies