Tech Problem Aggregator

Malware on router and multiple devices

Q: Malware on router and multiple devices

Slowly lost app's now have no control. Or admin privilege. The screen looks fake. There's drives listed I can't access. And every download was hijacked. Now theres no real Network or bios driver installed. after multiple attempts and no system functions available I want to use another computer and try to download virus software there. Noticed something strange happen and both laptops havea Dll bug long story short my Android, laptops, printer and router have all been hijacked and I do not know what to do at this point

I haven't seen or been able to find anything on something so expensive enedina have any other laptops that are accessible at this time so even doing it from my phone is challenging

More replies
Answer Match 66.36%

I have 7 devices connected to my Netgear Router 600/3700v2 and the devices keep disappearing. I believe I have found the solution. Connect to your Netgear Router (you will see BASIC and ADVANCED options) and select the ADVANCED settings. Click the tab below ADVANCED SETTINGS and in the drop down menu select UPnP. You will see on the top of the screen ADVERTISEMENT TIME TO LIVE - this setting DEFAULTS TO "4" which is okay for "normal" home use (well, it didn't work for me). This setting is what controls your attached devices. If you keep losing them, try increasing the settings until they remain visible. I tried 5 first - no go. Then I tried 8 and I haven't lost the devices since. Hope this works for you!
 

More replies
Answer Match 66.36%

I have tried to research this and am not finding the information I need to answer the above question so hope a networking expert can help.

I recently for the first time went over my monthly data cap for broadband and looking it to it a bit more it looks like a lot of the programs my kids are using are hogging the bandwidth. I don't really want to pay for more bandwidth (as I already pay way above average as I live in a small rural village) but I don't want to restrict too much what my kids are doing.

The solution to me seems to be to see if I can monitor and if possible control to some extent the data on each of the IP connected to the router if that is at all possible.

I have looked at my router settings and unfortunately they do not permit anything more than traffic monitoring and there are no custom firmwares to allows additional features of any use.

Is there any software that I could use to do this?

Can anybody help at all with any advice about whether this can be done?

A:Can i monitor and control multiple router connected devices data???

It is almost impossible to restrict the total usage of bandwidth. To my knowledge there are no setting for that in normal routers/gateways.

1 more replies
Answer Match 66.36%

Hi,

This is my first post so please be gentle, I have a Netgear DG834GT connected to Talk Talk with a WEP security key, I have 1 desktop, 1 laptop, ps3. ipod touch and iphone all using it wirelessy, there all connected to my home network, but its pot luck if you can connect to the internet at any time with any off them, it seems to be whatever is connected first is ok, whatever trys to connect to 2nd or 3rd and so on is pot luck, or the connection may even drop, please help.
 

A:Solved: Lose connection with netgear router, with multiple devices???

16 more replies
Answer Match 66.36%

This is my first post and glad to be here among experts. I will list my issue, please tell me what information you need to be of assistance.

I have a net gear WNR2000vs with the latest firmfware to date. I have two wired devices connected: 1. my pc 2. xbox, and also one wireless device connected 1. my cell phone via wi fi.

Before I updated the firmware:
I would hard wire my 360 and pc to the router together. My 360 online play would work fine for about 10 minutes then my connection on my 360 and pc would drop. My network status would say 'resolving issue'.

After updated the firmware:
I now have my 360 and pc hard wired to the router together. These two seems to work fine together. When I try to connect a wireless device my connection drops. My pc resolves the issue and regains connection, but if I try to navigate a webpage or download anything from the wireless device then it starts the whole dropping connection thing again.

I'm not sure what information you guys would like but here's some basics. Thanks!

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) II X4 965 Processor, AMD64 Family 16 Model 4 Stepping 3
Processor Count: 4
RAM: 8190 Mb
Graphics Card: ATI Radeon HD 4600 Series, 1024 Mb
Hard Drives: C: Total - 305142 MB, Free - 100720 MB;
Motherboard: MICRO-STAR INTERNATIONAL CO.,LTD, 790FX-GD70(MS-7577)
Antivirus: Kaspersky Internet Security, Updated and ... Read more

A:Net gear router losses connection when multiple devices are connected

11 more replies
Answer Match 64.68%

As it says on the tin really! I am an absolute non technically minded person so have no idea how to even start trying to fix this problem. A few weeks ago our router quite happily let multiple devices attach wirelessly to the internet at once but in the last couple of weeks it has started only allowing one device at a time to connect to the internet. If say my partners work laptop is connected then our home laptop/iPad can see the wireless router but it will not allow them to connect to the internet anymore. Can anyone help me to try and sort this please...I can use my computer for basic things but am in no way technically minded so please be very clear and simple with any help you are able to give.

TIA
 

A:Unable to connect multiple devices to internet using Huawei EchoLife HG521 router?

10 more replies
Answer Match 58.38%

Hello all,
 
I recently got a new desktop PC, and am about to connect it to the internet. To do this, my service provider told me I'll have to connect it to the router used by the other desktop in my house. This concerns me a little bit, because the computer the router is connected to now has had a lengthy history of malware attacks.
 
So my question is this... Hypothetically, if System 1 was infected with malware, would it be at all possible for that malware to spread to an otherwise clean System 2, via the shared router? As soon as I can establish an internet connection on the new system, I'll be setting up Kaspersky AV 2014 and a full (paid) version of Malwarebytes.
 
Any input is appreciated. Thank you!

A:Malware infecting multiple systems via router... possibility?

Yes it would be possible for that to happen for example a virus called a worm.. can quickly spread through network routers and more.

2 more replies
Answer Match 57.54%

Hi there

Not sure whats happening here but getting multiple displays for the same devices !!!!

Any fix, or is system Broken.



Cheers
jimbo

A:Devices and Printers - devices being displayed multiple times

Looks like Ghosts of DLNA devices. Start by taking offline any DLNA capable gear, reboot the Gateway and also clear its IP Table.

Also clear out those ghosts from Devices and Printers.

For some reason this started in Windows 7, when Microsoft started to play games with DLNA and media Shares.

1 more replies
Answer Match 54.6%

I consider myself an advanced user, but this one I've never seen, nor can I find info out for...

I haven't been able to plug a video camera or external hard drive into my computer via FireWire. I then tried a different cable, nothing. I then tried a different device and cable, nothing. I then tried a different computer with two devices, nothing.

My USB2.0 works fine with each device and computer. I also took the new computer into CompUSA and they tried their firewire device and all worked. I bought a new firewire cable, but I have the same luck with each device.

How can 2 external hardrives, and one sony camera not work, after working for a year. What happened? What do I need to do?
 

A:Multiple firewire devices on multiple computers not working

6 more replies
Answer Match 53.34%

There are multiple websites that I cannot connect to, facebook, rottentomatoes, youtube, to name a few. Others seem perfectly fine. A few seem okay, but seem to be running slowly.

This is the case for both my computer (on which I am running Windows 7), which is connected directly to the router, *and* mobile devices which are connected wirelessly.

On my computer I have tried using several different browsers to no avail, but when I used the TOR browser to proxy, I was able to access them.

I apologize if this has been asked, but I haven't been able to find anything this specific.

Thank you.
 

A:Can't connect to multiple websites on multiple devices

6 more replies
Answer Match 51.66%

Our ISP recently updated their hard ware to work with the Sprint network. Note: our ISP is not Sprint, but the local phone company.

Our Hardware:
Internet: DSL 10.0 (highest speed available)
Modem: Comtrend (ISP provides)
Router: Belkin N
Computer: 10 yr old Dell running XP - service pac3 - wired connection
Kindle Fire (first edition, no HD, etc) - wireless connection
Xbox 360 - wireless connection

Issues:
Xbox - went from constantly bumped from Xbox Live game by losing internet connection to not being able to enter a game at all
Kindle - went from occasional "network error' message during online tasks to having to restart download (multiple times) or refresh page for most any or all online tasks
Computer - have to click refresh to get most any page to load after the home page

What we've tried so far:
I have recently cleared the cache on both the computer and Kindle. XBox's new security measures have been met.

My questions:
Do any or all of these issues seem to be related?
Is there a piece of equipment or something we may be missing to make all of these things work? I am a networking novice.
Who should I call to get these issues corrected, my ISP or a tech service? Note: if I start with the ISP and they do not find an issue I have to pay for the call.
 

A:Multiple issues over multiple devices

First. You should try to NOT use a wireless connection for any type of gaming: PC, Mac, Console, etc. If you can hard wire the xbox you'll be waaay better off than using wireless.

Now... Yes, the issues could be related - there maybe an issue with the Belkin N router. I'd try to first reset the Belkin router to default settings, check on manufacturer website for instructions how, most routers you can press a "reset" button w/ a paperclip or ball point pen. Reconfigure the Belkin router, recreate the wireless network and see how everything works. If you are still having issues, humor me and connect the Dell directly to the DSL modem, bypassing Belkin router. See if you still have connection issues, if you do then it could be the DSL modem that is the problem and call your ISP to replace. If you don't have same issues then it's most likely an issue with the Belkin router. Replace it. Don't buy the dirt cheapest router at the store, but you most likely don't need the most expensive one either. Find a good middle ground router, ask sales associate to assist you accordingly.

Post back, Hope this helps!!
 

1 more replies
Answer Match 48.72%

I use w10 on 3 devices, a mid range gaming PC, linx7 tablet, and lumia640. On the whole the experience is pretty good, syncing works well, reminders, alarms, contacts etc. This was one of the reasons I opted for android early, using chrome on a PC gave a similar, yet skimmed down, one OS feel.
I've not had one BSOD since updating the 'rig', my mobile works great, and the tablet is amazing for ?49! I was talking to my father in law who uses all 3 main OSs every day, and we both agree that windows just feels more 'grown up' than iOS or android. He wants a win10 phone next to replace his android (he'll have to keep the company iPhone4).
So like I said, does anyone else have a similar experience?

A:Who else uses w10 across multiple devices?

yeah i have no probs with my Lumia 920, HP work laptop and 2 of table computers at home.

just pisses me off to have the same background on each computer and i seem not to be able to find a setting to keep that sync out

2 more replies
Answer Match 48.72%

I want to use the audio simultaneously from my ati 4550 HDMI, Sony blue-tooth speaker via usb BT dongle, 3.5mm jacks on my mobo, and also from a spdif and digital coax linked to the mobo via on board header to expansion bracket with ports.

I know this all may sound like overkill, however I don't have the funds for high end switches / replicators, etc. So manually changing them has been a hassle.

I have done some reading and I know se7en doesn't let you. I did this with xp x64.

Anyone know of a "work-around" or hack to enable all devices at once?

Intel E2140
Intel DQ965CO
4gb Kingston 667mhz
MSI r4550
Ultra MD3 Dashboard
Gyration RF MCE Universal Remote

A:USE MULTIPLE DEVICES 7 x64

From what I see, you can only have one "Default" Playback device so I doubt that what you want to do can be accomplished.

2 more replies
Answer Match 48.3%

We receive Email on Desk Top, Ipad and Laptop that is repeated each time we open a computer and look at the mail . Also have two programmes on the Desk Top that again repeate the mail : Windows Live Mail and Mozilla Thunderbird. This causes untold mail and most annoying. How can I just see the mail once on either of the computers. We run Windows 7 on the Lap Top and Desk Top, the Ipad is the current model.

Hope you can assist me please, my husband and self are not very computer literate.
 

A:Email Across Multiple Devices

The closest thing would be to set them all up as IMAP instead of POP accounts. That way you get all the same email, the same deletions and moves, and the same emails marked as read across all devices. It doesn't quite prevent you from seeing the email more than once unless you move that email to another folder or delete it in which case the same thing will happen on the rest of the devices.

You would have to check with your email service to see if they support IMAP and to get the correct settings. Or post your email provider here.

Also, I changed the title of your thread from your name to something more meaningful.
 

1 more replies
Answer Match 48.3%

So here's the setup:

Windows Home Premium X64, 8GB Ram, I5-3570K CPU

Recently built. I understand there's been an issue with Windows 7 using different devices for audio outputs. I was told by MS IT to use Virtual Audio Cable (VAC) for 'combining' my programs/devices into the same output.

My computer is mostly built for Audio recording (Audacity, Adobe Audition), and virtual instrumentation (Reason 5, FL Studio, Abelton, etc...)

My issue is that while some of these programs work well with VAC, key important ones such as Reason 5 do not. With my particular soundcard and driver, there is a degree of latency between the time I press a note on the keyboard to when I can actually hear it.

FL Studio automatically bundles ASIO4ALL - an awesome '0 latency' driver pack that comes with a easy to use control menu. ASIO4ALL is automatically selected as the audio card driver.

However I am unable to use VAC whilst keeping the latency low at the same time.

I need some help if you please!

A:Multiple Devices - VAC not working for needs.

I have a Sonar X2 (Producer) studio. Something like your questions would be better answered on a board such as www.gearslutz.com where recording and DAW equipment is the topic of the forum.

I don't like ASIO4ALL, it can cause problems. I've had problems with trying to use it when I had a Focusrite Saffire Pro 40. I've seen other posts (on other forums) about ASIO4ALL problems.

I have a Roland Octa-Capture and an MAudio Fastrack Ultra 8R and I only use the drivers supplied by Roland and MAudio.

1 more replies
Answer Match 48.3%

Hi,

I have an ethernet connection running from a router to another room and I wonder if I could use that single connection for multiple devices (computer, game systems, etc). Will a hub work for a connection coming from a router?
Is it possible to have them all up and running simultaneously or does it have to be one device at a time?

Thanks,
~mark
 

A:Single IP, multiple devices

If it's a standard SOHO router, and not a switch or a modem, you can have up to 253 devices attached. (There are 256 addresses available, but you can't use the first or last address, and one is reserved for the gateway--the router itself.) Note that the 253 addresses includes wireless devices.

Courtney
 

3 more replies
Answer Match 48.3%

hi, i'm relatively new here, so i'm not really sure how to do this but alot of my games are having problems i.e. ? has cause in invalid page fault in unknown. I am led to believe it is a soundcard problem, i use an onboard sound card with the VIA VT1612A 2-channel audio Codec and i look in multimedia properties under audio devices, i had two different ones, Audio for via Ac'97 Enhanced Audio Controller(WDM), and Audio for Vinyl AC'97 Codec Combo Driver (WDM), i was told by a friend to uninstall the drivers and then reinstall to fix this, i did, now on top of those two devices i have a second Audio for Vinyl AC'97 Codec Combo Driver (WDM). I also have three MIDI for WDM-based Device. ANd Mixer for VIA AC'97 Enhanced Audio Controller (WDM), along with two Mixer for Vinyl AC'97 Codec Combo Driver (WDM),this may be normal, but like i said i'm relatively new at this and it doesn't really look normal, so can someone please help me? Thank You
firebrand_24
 

A:need help, multiple audio devices

Look at the back of your computer. Do you have onboard sound AND a seperate PCI sound card? If so then you need to disable the onboard sound in the BIOS setup and use only the PCI sound card.

Now go to Add/Remove Programs and uninstall ALL VIA AC97, AC97, Vinyl audio drivers and anything else that looks like it goes to sound drivers.

Then go to Device Manager and uninstall/remove all remaining VIA/Vinyl/AC97 devices listed under the Multimedia heading. Reboot only after all are removed.

Then download the latest VIA Vinyl drivers. When you first run the new driver setup program it will look to see if there are still drivers installed, if it finds any then it give you the option to uninstall them. Do that and reboot.

Then run the VIA installation again and install the drivers, and reboot.

At any point Windows may redetect the sound card and want to reinstall the drivers - let it. Do NOT click Cancel on the Found New Hardware Wizard. If all goes well prior to install the latest driver the sound card should be detected as a PCI Multimedia Device and that means all the drivers will have been removed.

Here's the latest drivers: http://www.viaarena.com/Driver/Vinyl_AudioCode_v600a_M.zip
They are in a ZIP file, once extracted you need to run the SETUP.EXE file to install the drivers.
 

2 more replies
Answer Match 48.3%

Ok, this isn't really pc related, but I'm sure it's an issue many of you face every day. I have a PDA/GPS, cell, bluetooth headset and blackberry. I use each every day, which means every night I have to plug all four devices in to charge. Does anyone know of some kind of charging station that would house all four power adapters neatly and allow me to charge all four devices from one outlet? Is there some kind of travel charger that would let me plug all four devices in to charge at once? Such a hassle taking all four adapters every time I travel.

Thanks
 

A:Any way to charge multiple devices at once?

7 more replies
Answer Match 48.3%

i have speakers connected to the hdmi and have a fm transmitter connected to the headphones jack. how do i get the soud to come out of both? Picture:

 

A:Sound from multiple devices

You can't have sound from both at same time - it's either one or other because the headphone jack is designed to mute the speakers when headphones are plugged into it.
 

2 more replies
Answer Match 48.3%

Hi, I recently purchased a HP Pavilion dv6974 Laptop, it came installed with Vista 64-bit. It works fine and all, just one thing I want to figure out.

The laptop has built-in speakers, a built-in mic, 2 headphone jacks and 1 microphone jack. I plugged my headset into one of the headphone jacks, my headset microphone into the microphone jack, and my external speakers into the second headphone jack.

What I wish to do is to set it up in a way that I can play music through my speakers, and Ventrilo through my headset.

The way I did this before on my desktop was that there was this option in the Realtek Audio Manager called "enable playback multi-stream" that separated the two audio jacks on the computer (one in the back, and one in the front). Then I was able to choose a different audio driver for Ventrilo, and use the default one for music. This was on XP, and I only had one sound card btw.

And now for Vista, I've tried looking through the Audio Device Manager and the Realtek Audio Manager but couldn't find anything that would help much, except in the Realtek Audio Manager there's this "tie up all input jacks something something, etc" that sounded like it was what I was looking for, but all it did was mess up my microphone.

To add more to this confusion, there is actually another audio device in the Audio Device Manager, but it's the Digital Audio Receiver, and I don't really know what that does.

I've asked about this problem elsewhere, and some peopl... Read more

A:Multiple Audio Devices

Hi, ForeverRen, and welcome to the forums.

I think HP would be your best bet in this instance....as they would be able to tell you for sure if that can be done with their hardware or not.

3 more replies
Answer Match 48.3%

I have 2 x 24 port hubs uplinked to each other. I wish to introduce a switch.

How can I do this with the uplink ports on the hubs reserved.

Trev.
 

A:Multiple network devices

7 more replies
Answer Match 48.3%

I use laptop, with system speaker volume too low, almost inaudible.
It has inbuilt sigmatel HD audio, with 3.5 mm jack ( I do connect my headphone with it).
I also posses a bluetooth headset (DELL).

Is there any way I can get output to both the headsets?

I need this to watch movie, so that me and my room partner can easily listen via saperate sets fo headphone without difficulty.
 

A:using multiple sound devices

as far as i know you cannot output to two audio devices at the same time from one program unless the program alows this (eg. PCDJ)

To solve the problem you could get a 3.5mm spliter and another set of 3.5mm headphones but this would probably require a trip to an electronics shop unless you have one already.

also post what OS you are running in case someone else knows of another way.
 

3 more replies
Answer Match 48.3%

My system has a sound card and two USB audio devices. I can click the speaker -> options -> propertied -> mixer device and select 1 device and reboot and play via that device. However I would like to have all audio devices work at the same time. Is there a way to do this? If not, is there a way to switch without rebooting? (Windows 2000).
 

A:multiple audio devices

..................err? why do you need/want multiple audio devices from the one PC??????
 

3 more replies
Answer Match 48.3%

I would like to connect a variety of wireless devices in my house to my work VPN while allowing other devices in the house access to my home network as normal.

I was hoping to find a wireless ADSL router that allows me to associate a LAN port to a VPN connection, then connect a wireless access point to that port. I could then run two wireless networks in my house, one that would connect to my work VPN and the other that would not.

Is there such a router?

If not, is there some other way of doing what I need?
 

A:Connecting multiple devices to a VPN

Sorry for the bump, but would this do the trick?
 

1 more replies
Answer Match 48.3%

Windows 7 Ultimate, 64 bit. Home network. Already have 3 printer devices. One printer is All-in-One (HP). Want to keep that device installed and be able to use all functions. Want to add a desk top scanner for speed and versatility. The All-in-One is network cabled and also USB to my desktop computer. The desktop scanner is not network; would be USB to my desktop computer. I seem to recall reading somewhere (not sure of this - maybe HP literature to discourage buying other scanners) that you can't have more than one scanner. Doesn't seem logical. Is more than one scanner (using only one at any one time) OK?

A:Are Multiple Scanner Devices OK?

As far as I know you have as many usb devices hooked up to one computer. There is a theoretical limit of 124, but it really is determined on how many usb ports you have as to how many usb devices you can hook up. Each device has it's own driver/software package, so I don't see any real reason you couldn't. I know for a fact you can have a printer (all in one) and scanner hooked up at the same time. My dad did using XP, Lexmark all in one printer and an HP scanner.

4 more replies
Answer Match 47.88%

Does anyone know if Windows 8 will intergrate multiple output devices to play at the same time? Windows 7 doesn't do it... which is stupid. Pirates will always find a way to bypass this, but I'm stuck without this important feature!!! This is absolutely CRUCIAL for HTPC (home theatre PC) people and/or DJ's or Music producers / Artists. I also use audio levelers like SRS audio essentials which is considered another audio playback device. This is truly ridiculous that I paid all of this money for Windows 7 and I can't play to 2 sets of speakers at the same time. And if I want to switch to headphones for a second for any particular reason, i have to go through a process... and make it the default device and when I want to go back to watching tv I have to go through the process again...... SO ANNOYING..... it's my computer, I should be able to play to ALLLLLLLL of my devices. That's why I buy all these devices so I can use them all simultaneously. This is so basic. Can you please update Windows 7 with multiple playback on all devices. I don't copyright infringe or rip dvd's to external sources, but even if I was a shady individual, which I'm NOT, I don't need multiple playback device to do this. You're only hurting ME, the consumer that pays for things I use. It's MADDENING. PLEASE UPDATE YOUR PLAYBACK DEVICES TO INCLUDE SIMULTANEOUS OUTPUT PLAYBACK TO ALL DEVICES.... OR AT LEAST SEVERAL... I mean really... for this stage of technology, this is totally ridiculous.

A:Playback Devices - Multiple Outputs

better to ask this question here
Windows 8 Forums

The people frequenting there have more direct experience with windows 8 than the average user here.

7 more replies
Answer Match 47.88%

Under XP, when I played an MP3 it would come out of my headphones and my SPDIF port to my AMP at the same time. Under vista I seem to have to choose and keep changing them manually (setting one as default) . Also, when I change them, it doesn't seem to take effect till I restart that application, mp3 player, movie player or whatever.

I seem to have similar issues with mic vs line-in. and switching between them doesn't always seem to work if in use and Mute options also seem to not kick in.

I read some scare stories about DRM but I'm not sure that this is relevent or not .

In XP, this just worked. sound would go into the IN's and come out of the OUTs and could be muted where needed. Does this work differently now?

More replies
Answer Match 47.88%

Right now I have my computer hooked up to two sets of I/O devices (mouse, keyboard, monitor) and I was wondering if you can separate them so that for example I can surf the web on one set and have a friend play a game on the other. Currently they show and control the same things.

Both monitors are on the same graphics card, one mouse/keyboard is USB the other PS/2

Thanks for any help.

A:Using multiple input devices on one Computer

Nope, there is only one console manager. Since you already have the monitor and keyboard, why not find a cheap machine and just have two?

1 more replies
Answer Match 47.88%

So my household needs to upgrade internet. Our internet speeds are slow (3mbps) and my mom works at home with various computer programs as she processes documents and claims.She cannot deal with the lag in her internet speed caused by my brother playing his new xbox one (which I've heard takes up the internet like no other) and me browsing the net all at once.

I'm asking because I don't know about internet speeds, our current plan in our area is the best one (I know 3mbps is not alot) but apparently that is the highest service AT&T U-verse provides.

So I'm wondering if anyone knows what would be a good speed for internet considering all of this, it know this isn't exactly a computer problem but I wouldn't know where else to ask.

Thank you for your help!
 

A:Would 5mbps be enough to support multiple devices?

Hi 12FindersKeepers,

12FindersKeepers said:

So I'm wondering if anyone knows what would be a good speed for internet considering all of this, it know this isn't exactly a computer problem but I wouldn't know where else to ask.Click to expand...

No problem, this is the right section to ask in.

Now I'm a bit confused as to whether your potential Internet speed would be 3Mbps or 5Mbps (conflicting information in title and post). Either way, you're right that that isn't very much bandwidth. Your mom should be able to do her computer work assuming the file transfers she performs involve smaller Word, PDF, and text documents. The primary factors here will be what you do while web browsing, and the Xbox One connection.

You likely won't be able to play Xbox and stream video well simultaneously - that isn't even taking into account possible file transfers of your mom's.

I'm not sure where you live, but most developed areas in the United States have Internet speeds much higher than this. I recommend doing some research online to find out if this truly is your only option. With modern Internet content, I would say ~10Mbps is a good minimum recommendation for a pleasant browsing experience.

If you cannot find/get an Internet connection with increased bandwidth, then you all may need to dedicate times for certain activities on the Internet.
 

7 more replies
Answer Match 47.88%

Is it possible to connect the ac511 to multiple devices?

A:connect ac511 to multiple devices?

The AC511 is USB Sound. Answer is no not ever.
So there is no splitting.  It cannot be attached to multiple usb ports.

5 more replies
Answer Match 47.88%

I've googled this endlessly with no result and I'm guessing it isn't possible but I may as well ask.

My laptop has one audio/mic port. I'm cheap and had a splitter laying around, my headphones, and a set of ear buds with a mic on it I combined to use as a headset.

This works fine, however, since the sound output is being split to both my ear buds and headphones, it doesn't sound as good and some things are faint, which isn't good for gaming.

Is there a way to manage my audio devices so that my ear buds is mic only and no sound, and my headphones get all the sound? I've found no options in Windows, just playback (speakers) and recording (mic). I assume because it's only one jack it isn't, but it can't hurt to ask.

More replies
Answer Match 47.88%

Why do I have so many "base system devices" can I safely delete them ?

A:Multiple Base System Devices, why ?

first, we need to know your system specs, follow this tutorial

Second, why are you posting a Win 8 issue in sevenforums when there is eightforums?

9 more replies
Answer Match 47.88%

I have an Xbox One, Windows Phone, and Windows 10 laptop. I have Hey Cortana enabled on all of them. I use it all the time on Xbox to control my tv volume and channel. I use it while I'm driving on my phone. I don't use it that often on my laptop, but sometimes I will use it to change songs or something while I am working. The point is, I have fairly justifiable reasons to have it enabled on 3 devices.
So lets say I'm watching football. I have my fantasy stuff up on my laptop, and my phone is near bye because its always there. I decide I want to mute the TV, so I say "Hey Cortana, Mute". The result? My Tv mutes, my phone and my laptop both tell me that they cant perform that function. I do that same with volume up? Same result.
Later, I say "Hey Cortana, call Wife". The result? My Xbox and TV either try to open Skype or give me an error while my phone calls my wife.
So year, having the same "Hey Cortana" voice commands for 3 devices was a poor idea. "Xbox, Mute" worked fine. I mean, I do feel like Cortana does a better job of understanding what I am telling it to do, but couldn't it have stayed as Xbox commands rather than Hey Cortana? I could just turn it off on my laptop and be happy with it, but I actually use it for my phone and my xbox.
Imagine when people actually start buying Surface Phones (if that ever happens). What were they thinking?

A:Hey Cortana... multiple devices... what were they thinking?

Lucky sod, we have three Xbox Ones, two PC's two Surfaces and three Cortana enabled Windows phones in our flat, we have discovered the meaning behind the phrase "She who's name must not be spoken"

3 more replies
Answer Match 47.88%

I seem to have a bug in the USB drivers or such that I need help with analyzing. I have tried deleting the USB drivers and letting the system update the driver. I am rather a newbie at system diagnostics but somewhat proficient at computers so hopefully with your help I can iron this problem out. Thanks very much ahead of time

HP dm4 laptop
Intel i5
4GB RAM
Toshiba 500GB HD

A:multiple BSOD USB bugcode USB devices not being used

You have both Norton Internet Security and AVG installed. Please remove one or the other and see if your system is then stable.
AVG Remover

Norton Removal ToolHaving two security programs that accomplish the same tasks can cause conflicts/freezes/hangs/crashes/etc. due to them using the same system resources simultaneously. If you had tried to remove one prior to installing the other, it may be that remnants remain and you should contact support for that product to get it properly removed now.

3 more replies
Answer Match 47.88%

I have a dell dimension 2400 that I think is going kaput. I've had to format one drive twice and an alternate drive once (merely to test that the first hard drive wasn't the issue.) My primary problem and reason for my first reinstall was an OS hanging issue probably due to some hardware conflict somewhere - various solutions such as safe mode, repairing install and fixboot would not work (scared to use fixmbr without first checking all my options.)

Three soft formats later and both of my hard drive installs are ticking my ethernet adapter, among other devices, with a question mark. As an example, I've used the OEM disks provided for the 3com 4011 integrated ethernet controller, selected the appropriate driver and ended up with a code 10 on it. I boot to safe made and check all the hidden devices for obvious conflicts but no such luck, there are no other NICs installed on my PC and the rest cannot be removed ("you need this device to boot" message on uninstall attempt")

Does anyone know where I can find out which resources my device wants to use?
quick edit: it is XP
could it be a ghost device driver sucking up resources from a previous install?

question the third: HAAALP! according to the utility partition manager my system is in full working order (ha.)

many thanks for your gratuitous help.
 

A:Solved: Code 10 multiple devices...

I'm adding an everest report of the hardware for your viewing pleasure.

it can be viewed here:

http://www.mediafire.com/?nlg3yiyy12g
 

2 more replies
Answer Match 47.88%

Hi there.
I am using my phones 3G to type this and it's a real nuisance since I cannot research information for essays and other important aspects that I need when studying for my A levels.

Anyway, it started last night around 11pm, everything died and I thought it was because of the bad weather.
I woke up to sunshine however the internet was still not working.

The router is a SuperHub 2 and it had no problems up till now, the lights for 5Ghz and 2.4Ghz are flashing and so are the other lights on the router - this the router is working.

The problem is the connectivity, I use my laptop, iPhone and computer all together when studying and playing games. All of which has the same problem. All have the 5 bars connectivity however they all say "no internet access" and no response from the DNS servers.

What is the problem then?


What I've done:
- I have release and renewed the IPs
- reset router numerous times
- turned on: off router numerous times
- fiddled with wires to make sure they're plugged in.
- turned on and off computers and laptops.
- set IvP4 to automatic.
- waited hours.
- went onto the Virgin Media router page via 192.168.0.X. Then I started the router up in factory status, starting I up a few times.


How do I fix this nuisance? I need the internet now, for work purposes.
Please help, since it's affecting me and my family members and all of our devices.

A:No internet access on multiple devices

Does the Virgin Media router page give you a status of the WAN?

We had a bad storm last week and it took a few days after power was restored for Comcast to repair their lines.

I was able to get to my router, but the WAN address was 0.0.0.0 - can't get there from here!

If you have a WAN address, turn everything off (no power) then
power up your cable modem, wait a few minutes for it to cycle through what it cycles through
power up your router (if seperate) wait for it to cycle through what it cycles through
finally power up your machine and check the network status on the Virgin Media router

If you don't have a WAN address, report the outage to your provider. They probably already know about your area, but a call never hurts.

Bill
.

8 more replies
Answer Match 47.88%

New box is together. Windows 8.1 64-bit.

When I look at my drives in file explorer, a couple drives have multiple drive letters...

For example, my data backup drive, which is only one partition, shows up as drive "Int data backup (T(T(T" - unfortunately, it keeps changing the colon and closing parentheses to that goofy smiley face.

Same for a couple others... I've never seen this before in Windows 7, so what is this? Do I need to do something about it?

---------------

Also, in "Devices and Printers" from the control panel, I have FOUR occurrences of "DIRECTV2PC Media Server" and FOUR occurrences of "DIRECTV Mediashare Renderer"

Do they have anything to do with the multiple drive letters? What the heck are they for? And can I delete them?

A:Multiple drive letters and odd devices

It appears your PC is connected to a media Share network

5 more replies
Answer Match 47.88%

I'm not entirely sure if this is a Windows Sound issue or a hardware issue, so I'm asking this question both here and in a Windows Community Forum. Is it possible to output audio to multiple devices (i. e., can one assign more than one "Default Device")?  For example, can I output to the USB-S/P-Dif device connected to my stereo and the bluetooth device driving my outdoor speakers simultaneously? I have an Envy dv7-7255dx, with the IDT Hi-Def audio codec, running 64-bit Windows 10 Home. Thanks!

More replies
Answer Match 47.88%

I realize this is a forum for Windows 7, but I don't know where else to ask this question lol.

Earlier I made a thread about my mom's computer being unable to reinstall Windows 7 after a factory reset. I think I've found a possible fix for this, but I'm not entirely sure.

I'm currently in the process of installing Windows 10 on my own computer via the Windows Creation Tool, and I noticed that it gave me the option to not only install W10 on my own computer, but another's through a Flash Drive as well.

So my question: after I've installed Windows 10 on my own computer, would it be possible to also put a copy onto my flash drive to install Windows 10 on my mom's computer as well? And if so, can I bypass the product key requirement to get to the desktop? I've got some code that I used to grab my own product key in order to install Windows 10 for myself, which I can also use to retrieve my mom's product key if I can get to her desktop to open Notepad.

I've never booted a computer via flash drive, so I don't know whether or not I can do this. I don't have her product key, and I can only get it if I can access her desktop (unless there's another way, because the product key on the back of her laptop is too faded to read).

Thanks in advance!

A:Installing Windows 10 on Multiple Devices?

Once you've made an install flash drive (or DVD or iso) from the Microsoft site, you can use it to upgrade any number of qualifying computers (genuine activated Windows 7 SP1) to Windows 10 without needing a serial. It must be the correct edition ie Windows 7 Home Premium needs a Windows 10 Home flash drive. A sneaky upgrade attempt from Home to Pro will appear to work, but won't activate (you will prob be nagged to buy the correct serial sometime in the future).

https://www.microsoft.com/en-us/soft...load/windows10

re : booting from flash - I found that the upgrade didn't work in that scenario. I had to run setup.exe from within Windows 7. If a clean install is your goal, once Windows 10 is installed, you can boot from the install media (flash, DVD etc) and install again, deleting all partitions. You don't need a serial for this, because MS 'remembers' the hardware and activates it accordingly. If you do this, all data and apps are deleted.

Edit - if your mom's computer isn't actually running, you won't be able to upgrade it to W10 for free.

9 more replies
Answer Match 47.88%

Hi,

I've read through a could of threads but have yet to find any answers for my problem. Basically my internet runs fine when a device is directly connected to my modem. However, when running through a router I get 2-10 second disconnects at random intervals on all devices hooked up to the router, be it wired or wireless. I've already tired three different router, all different brands, among other various things like updating/switch firmware and changing the router over to a new wall socket with no luck. I had my service provider come out and switch the modem, but that didn't help any. Any help would be appreciated.
 

A:Internet cutting out on multiple devices.

what cable is between the router and modem - has this been changed ?
you mention "wall socket"
As you have made a lot of changes to the modem and to the router(s) - i can only think of cable

Before making each connection , do a powercycle - see how below

connect with a small cable between the modem and PC - and that works fine
then with a 2nd cable - do the same
now you have two cables that you know work on the modem
Also while in that configuration post an ipconfig /all - see how below

then using the same cables - connect from the modem to the router
and using the known cable connect the PC to the router
Now test again and see if this time it works
ipconfig /all

We would like to see the results from an ipconfig /all - post back the results in a reply here.

If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the information above those entries

For Windows 8 or Windows 10
To open a Cm... Read more

7 more replies
Answer Match 47.88%

I'm trying to use my speakers for everything except one program. I want to use my headphones for a chat program called Ventrillo. any ideas or suggestions?
 

A:Trying to use multiple audio output devices

I've tried just about everything I could think of and still nothing. Tried changing audio output settings on everything and still cant figure it out. Anyone know if its even possible?
 

1 more replies
Answer Match 47.88%

OK,
So on my home network, we have your normal cable modem, router, and gigabit switch setup. The router is a high speed linksys model (gigabit), and the gigabit switch is an 8 port. The ethernet goes all through the house, but I've recently built a media room. In this room I have a Zensonic High-def network dvd player for streaming media, a gaming/media pc, an xbox 360, ps3, modded xbox 1 for more media streaming and a wii. The wii isn't really relevant to the problem because it is wifi, but I'm proud of my media room.

The problem was that I needed to network all of these, and when the house was built, we only ran one ethernet port into the room. No big deal I thought, because as long as I'm just streaming media, a 10/100 switch would be sufficient. So I pulled out an old hub (not a switch). All of these devices were hooked up and it worked great. Then one day, it all just stopped. The hub was old, so I ran out and got a netgear fs605 switch on sale for 5 bucks at office depot. This still hasn't fixed the problem, but has helped me diagnose it. When I plug in the uplink, I get a blinking response. When I plug in the next device, it works and is recognized. However, every device after that causes the switch to stop working and just start blinking. No activity, it looks like an error code of some kind. Have I put too much on this little switch? It was working just fine for months on just a hub. Any thoughts?

Thanks
 

A:Network switch cannot allow multiple devices!

6 more replies
Answer Match 47.88%

"Deckard's System Scanner v20071014.68
Run by Owner on 2007-12-22 04:41:55
Computer is in Normal Mode.
--------------------------------------------------------------------------------

-- System Restore --------------------------------------------------------------

Successfully created a Deckard's System Scanner Restore Point.


-- Last 2 Restore Point(s) --
2: 2007-12-22 09:41:59 UTC - RP2 - Deckard's System Scanner Restore Point
1: 2007-12-22 09:40:33 UTC - RP1 - System Checkpoint


Backed up registry hives.
Performed disk cleanup.



-- HijackThis (run as Owner.exe) -----------------------------------------------

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 4:44:57 AM, on 12/22/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16574)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Synaptics\SynTP\SynTPLpr.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\Digital Media Reader\shwicon2k.exe
C... Read more

A:Popups, Multiple unknown processes, Multiple viruses and malware found...

TeaTimer is an excellent tool for the prevention of spyware but it can sometimes prevent HijackThis from fixing certain things. Please disable TeaTimer for now until you are clean. TeaTimer can be re-activated once your HijackThis log is clean.Open Spybot Search & Destroy.
In the Mode menu click "Advanced mode" if not already selected.
Choose Yes at the Warning prompt.
Expand the Tools menu.
Click Resident.
Uncheck the Resident "TeaTimer" (Protection of overall system settings) active. box.
In the File menu click Exit to exit Spybot Search & Destroy.

Download http://www.techsupportforum.com/sect...etTeaTimer.zip
Double click ResetTeaTimer.bat to remove all entries set by TeaTimer.


----------------


Do a HijackThis scan & place a check next to these items and select "Fix checked":

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Local Page =
O4 - HKLM\..\Run: [Curb tool help dart] C:\Documents and Settings\All Users\Application Data\Move Bore Curb Tool\That This.exe
O4 - HKCU\..\Run: [CreativeWeb] C:\DOCUME~1\Owner\APPLIC~1\LITEPL~1\Defy bias plus.exe
O9 - Extra button: (no name) - {CD67F990-D8E9-11d2-98FE-00C0F0318AFE} - (no file)

Ignore any prompts for a reboot


---------------


www.bleepingcomputer.com
www.forospyware.com
www.geekstogo.com

1. Please choose from any of the above links. Download the file & Save it to Desktop.

2. Double click on ComboFix.exe & follow the prompts.

3... Read more

6 more replies
Answer Match 47.46%

My wireless devices are having a hard time connecting though my router. They see the router and can connect to it but cannot get on the internet. When I go into my router and check Wireless Status to see connected devices the window is empty. Usually if I reboot my router some of my devices will connect but if I leave them idle for any amount of time the connection is dropped. Suggestions. I have Dell 530 desktop running Vist Home Premium and the router is Dlink Dir 615. The desktop has no issues connecting to the internet as it is connected through LAN port
 

A:Devices can see router but cannot connect

Please show for the Dell 530 and, if any of the other devices are running Windows, the following ...

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

2 more replies
Answer Match 47.46%

hey,

ok so i have a set up, all wifi where only some devices connect. ill start by putting some details. these are the devices i have on my network:

1 PC runnin Win 7 (connected
1 PC running vista or 7 (connected) <--- new roomates
1 iphone 4 running iOS6 (connected) <-- new roomate
1 iPhone 4S runnning iOS6(no long connects)
1 PC running XP (no longer connects)
1 PS3 ( no longer connects)

network hardware:

Modem: Motorola surfboard
router D-link DIR 615

the problem:

let me first start by saying that i know that EVERY device mentioned above is able to connect to the WIFI. they just dont :s.
Ie: jst yesterday i was on my PC, on wifi on my iphone.

since my roomate moved in, the above mentioned devices won't connect anymore. his do though :s.

i tried powering off and on both modem and router, nothing. the same devices will connect only none of the others.
i would like for all my devices to connect, all the time, without the need to reboot.

can anyone help here?

i did an ipconfig /all and 2 pings :
let me know if u need anything else.

also, im pretty good on computer but crap on networks.

C:\Users\ziggy>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : ziggy-pc
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection 2:

Media State . . . . . . . . . . . : Media disconnect... Read more

A:router only connecting to certain devices

10 more replies
Answer Match 47.46%

I have My PC (Win7) with Netgear WGR614v7 connected by Wired LAN to Topfield 7100 Pvr and Laptop (XP Pro). My main concern is the Topfield Pvr which must download programs from IceTV Interactive for Recording. After setting it up as DHCP (reccommended by both Ice TV and Topfield) and Pinging both ways to prove connection, I logged into the Router to check Network Status. The Topfield was displayed in the Attached Devices Page of the Router. Satisfied that all was setup OK, I logged out of the Router. Later in the day, I again logged into the Router to again check the Status of the Network. The only thing showing in the Attached Devices was: My Pc - the Topfield and the Laptop, both previously present, were not displayed in the Attached Devices Page, even though they were still Connected, On, and able to be pinged. The bring them back, I have to Re Activate the Topfield connection, unplug and replug the Cable on the Laptop.
I am of the belief, that once Devices are Setup, Remain Connected. Remain ON and are available for Communication (proven by Pinging), they should at all times be visible in the Attached Devices Page of the Router.
As I am not familiar with how the Router maintains its contact with Devices, I am at a loss to understand if my belief is correct or what may be the cause of my apparrent problem.
Any advice will be most helpful. I do not particularly want to buy a new Router.
I have also set the Topfield to a Static IP Address and Reserved this Address in the Rou... Read more

More replies
Answer Match 47.46%

Hi guys. I have my TV connected via HDMI through my video card to my computer and also run sound through my computers speakers with the onboard sound. Normally I just change the audio device before opening a program depending on whether I want it on the TV speakers or computer speakers. The problem is that sporadically when I select the device for the TV speakers it doesn't provide any sound and no combination of turning the TV on and off, changing the audio device back and forth etc will let give sound on the TV speakers (but when i change to the computer speakers it works fine). I can't seem to reproduce the problem either, it just happens sporadically and the only solution is to restart the computer.

I have vista 32 bit ultimate. Any suggestions?

More replies
Answer Match 47.46%

Okay, so I moved my wireless router to a more central location in my house (I got low signal in my room) and since then I've been able to connect to the network but only with limited access. Trying to connect to a webpage results in the "DNS lookup failed" error message (Chrome). My brother's computer had had the same issue, and the PlayStation 3 has had connectivity issues also, however I have been able to use my phone with the WiFi without any issues.

I've tried unplugging/turning the router on and off to no effect. Using a different router does not change the situation either. When I try to diagnose the network connection, it says that it could not identify the problem. Any ideas?

Some information:

Both computers run Windows 8
My phone is a Nokia Lumia 620 running WP8
The WiFi status window states that IPv4 and IPv6 have no internet access
My computer uses a Qualcomm Atheros AR5B125 wireless network adapter and says it is working correctly. The adapter is set to work with IPv4/6. IPv4 is set to obtain IP & DNS addresses automatically.

Any help is greatly appreciated. Thanks!
 

A:wifi limited access on multiple devices

For a Windows PC ...

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If your only email accounts are free (Hotmail, gmail, etc.) try this direct link. If you need help with a screen shot see TSG Posting a Screenshot. FWIW to take screen shots with Windows 8 or 7 or Vista I prefer to use the built-in Snipping Tool.

Identify your network if it is not obvious.

Also show ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

1 more replies
Answer Match 47.46%

Hey guys!
I've got an HTC One X, an ASUS Transformer and several Windows PCs that I use for business. Depending on my location I receive googletalk messages on any of those devices.
What I need is a software, like Trillian, that will save the chat history of my conversations online to enable me to access it from any device I choose. I don't want to check all devices if I wonder what a colleague wrote to me in the morning.
The problem with Trillian is, that it isn't optimized for the Transformer or any Pad in that regard at all (correct me if I am wrong). It forces me to turn the screen to "vertical mode" which isn't helpfull at all since the Transformer is in "horizontal mode", because of the attached keyboard all the time.
I would really appreciate your help and advice. To be clear: I am totally willing to pay money for such a software, but I don't even find one single alternative to Trillian.
Thanks in advance
Madelaine
 

More replies
Answer Match 47.46%

Good Afternoon,

The small office where I work has 1 wired desktop, 1 desktop connected over wireless, 2 laptops connected over wireless and two iphones that are always connected to the internet. Until about 12:45 pm EST the wireless internet was working fine, at that time the wireless went down. However, the wired desktop has had no trouble connecting to the internet. Please help, we need to be up and running and our IT guy has disappeared off the face of the earth! Thank you!

The router is a Cisco WRVS4400N. It is one MacBook Pro, a Toshiba Laptop and a Dell desktop that is connected by D-Link DWA-131. Its a Comcast X-Finity 56 MBPS connection. (we're really close to an airbase).
 

A:Connection Problem - Multiple Devices over Wireless

Reset or power cycle the router. Can you still detect the wireless network? If so, can you connect to it? If so, can you communicate with the router via wireless?
 

1 more replies
Answer Match 47.46%

I am using Windows XP,HomeEdition Version 2002, Service Pack 3.
AMD Athlon 64 X2 Dual Core Processor 3800+ 2.00 GHz, 3.43 GB of Ram
Firefox version 22.0.
 
We have noticed recently slow speed on our PC, Cell phones, laptop all connected to our wifi.
 
On this pc we have a search site called mysearchresults.com show up whenever we open a new tab.  There also an ASK.com search bar and a search bar that has the icon of the mysearchresults.com site.   Occasionally we get a small window pop up in the lower right corner ( where the taskbar is) that will play a video commercial.
This is also new, within that last few months these two things have started.
 
We notice alot more pop ups while on you tube, the video is jumpy while trying to scroll to the bottom of the page.  When you go to click on a link it seems to move forcing you to click on a pop up. 
 
I tested at speedtest.net and got a ping of 245, download speed of .19 and upload of .42.  I've been noticing a lot of 404 issues (im not sure what you call it...it says it cannot find where I wanted to go and leaves me at a search bar that says its powered by Bing.  (http://us.search.yahoo.com/404handler?src=toolbar&fr=slv502-tyc&type=&url=http%3A%2F%2Fwww.google.com%2F)
 
Mostly though we get...
 
Server not found
  Firefox can't find the server at att.yahoo.com.
 Check the address for typing errors such as
    ww.example.com inst... Read more

A:Multiple problems and slow speed on different devices

One computer per topic please.  Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeClick Go and post the result. Download Malwarebytes' Anti-Malware (aka MBAM): http://www.malwarebytes.org/products/malwarebytes_free to your desktop.* Double-click mbam-setup.exe and follow the prompts to install the program.* At the end, be sure a checkmark is pl... Read more

11 more replies
Answer Match 47.46%

Hello there
I am having major issues at the moment and have been trying to fix this for the past couple of months.
my primary laptop a Tobisha was playing up a while ago when I plugged my apple iphone into it and was transferring photo's, it was taking ages to respond and then came up with error corrupt image.
I tried again and it said the file was already there and if i would like to replace it? I saw the file size and it was 100 X bigger than all the others.
I got a little concerned and downloaded malwarebites to scan my computer (I had avg already installed and nortorns).
as time went on and a little bit of research online and fiddling about, the virus was not budging and had locked me out of admin rights.
I tried take ownership, downloading various programs to run and it kept overtaking the programs until i couldn't delete any files anymore.
I found an old laptop dell and tried to fix that one up (as that too had a virus)
I ran malwarebites on it and it removed somethings and i was able to get it going.
I was using an exeternal hard drive to back up my files from the tobisha and wanted to transfer them to the dell
when i noticed i lost admin rights on the dell also.
at this point too I was having strange things happen to my iphone, background app transfers and greyed out features with location services always on.
I tried deleting a heap of things on the dell after running some programs, it seems it now had the same thing as the other laptop.
I gave up trying to fix anythi... Read more

More replies
Answer Match 47.46%

So I'll try to keep this short.

I have a HP B209a-m that I have just gotten rid of and now am trying to remove all the software from my system. I've run revo and the issue still persists.

It gives me a device install path of ROOT\MULTIFUNCTION\xxx where xxx is a number. I have about 20-30 of these instances in my device manager and all have different install paths. I'd really like to remove these. I've run the HP L4 Uninstaller multiple times and still the issue is here.

I'd just really like to remove HP from my life.

Thanks for the help.

A:Multiple devices listed as Unknown, all the same printer

hello and welcome entfy mate try first backing up the registry Registry - Backup and Restore

See my pic AFTER you have backed up that registry but please do that the very first thing I usually make two copies in say the desktop and a document.
Let us know what if any HP software is there you can also check that entry named Printers.

1 more replies
Answer Match 47.46%

Hello, everyone.

I noticed a problem in my keyboard recently, but i'm not sure if it's really on the keyboard, and might be in the windows or software related. The problem is that the keyboard randomly starts freezing, it's hard to explain with words, basically the keys do not operate in the way they should, i notice this problem usually when i'm playing games, where my "W" that should move my character forward continuously. does not, instead of doing what it's supposed to do my character goes forward while freezing along the way. When i unplug, and plug it again on the USB port, even on a different one, the keybord start to operate normally again, but randomly shows this problem from time to time. It's not only with the "W" key, was just an example.

I noticed something yesterday, i don't if it's supposed to be that way, and i can't find any information about, it's that on device manager it shows multiple devices on the keyboard section, when the device is connected, as it shows in the image below:

One more thing, is all of them looks like the same thing, but i'm not sure if they really are, image below:

If i uninstall all of them, except that one that i marked with purple, he is the 4th one in the first image, the keyboard still operates, i'm not sure if the problem is fixed by that, cause it does not happen all the time.

Now that i described everything, i want to ask 2 questions:

1) Showing these multiple devices is normal? Cause i plugged anot... Read more

More replies
Answer Match 47.46%

I have been using Netflix for a few months. What I have noticed is that I will reach my device activation limit (6 is the max, I believe) rather quickly--specifically, it will tell me I have reached it after streaming 6 shows/movies. Apparently, my computer is being registered as a new device every time I stream a new show/movie.

I am wondering why this is, and how it can be fixed. The only solution I have found is to deactivate every device I have registered with Netflix (which is just my one computer I use for streaming)--only then will it allow me to watch another show/movie. This is a hassle, and if this is the only way, then that is alright. What I am most interested in is the reason my computer could be registering as separate devices like this. I can think of a few possibilities:
-Computer is registering by a dynamic IP address set by the ISP (I do not use a router)
-Computer is registering as a new device by some other means
-Silverlight is somehow acting fishy (which this does not seem like a local problem like a program on my computer)

It must be noted that the device ID number listed on Netflix is different with each registration of a new device (even though it is the same device every time).

I am currently in Louisiana. I am using Cox Communications as an ISP. I do not use a router. I pay my own utilities (so this is not an aprt complex-specific problem as far as I can tell). This same issue occurred when streaming on a friend's Netflix account, so it is no... Read more

A:Netflix-Computer is Registering as Multiple Devices

Should I re-post this in another forum that is more populated or that deals with problems like this?

Any help is welcomed.

5 more replies
Answer Match 47.46%

This is so odd. I'm running Windows XP SP2 on Dual core INtel with 1 gb memory.

I've installed a front USB panel that has 4 ports in front and 2 more on the PCI card which it's attached to. (added on peripheral).

I can deal with the "this device can run faster if plugged into a 2.0 device" but what is really frustrating is that if I plug in 2 or more USB devices. At least one of them won't work.

This computer is in my family room and wirelessy networked to my other computer in another room. I use a Motorola USB device to connect for the purpose of printing stuff off the printer in the other room.

If I have too many USB devices plugged in - there doesn't seem to be enough power to allow the wireless connection - resulting in not being able to print.

This isn't the only issue. I have some software that requires the USB "key" in order to work. If I need to use that software using the "key" and then I need to print something from that particular software to the remote printer - I have to save it to my desktop firsti - then disconnect the "key" and then I can print.

Do I need a bigger PS? I have a 500W now. I thought that would be big enough. Perhaps the USB issue isn't related to that at all? Is there some way to regulate how much power is assigned to USB devices?

Since my computer is in a desk against a wall - it's very difficult to plug and unplug stuff into the rear slots. Hence the install... Read more

A:Loss of power when plugging in multiple USB devices

16 more replies
Answer Match 47.46%

Is there a script to run remotely that will return sleep setting results for multiple pc's on a network? I know we can manually check each PC but was wondering if there was a faster and easier way.


Thanks

A:verifying sleep settings on multiple devices

Hi and Welcome to TSF!

Are people changing them?

How would you want to distribute the patch?

You can do so with a simple batch program.

1 more replies
Answer Match 47.46%

Ok im not quite sure where this question should be posted but i noticed the problem when i was playin games so this is where i chose...

Basically i've got different sounds coming from my speakers and my headphones. I have teamspeak coming through my headphones but my game sounds and other sounds from the speakers. I cant seem to find a way to make them all come from the headphones.
Using windows 7 32 bit

Thanks in advance
 

A:Sounds coming from multiple audio devices

Have you tried changing any settings within the Windows Sound panel?

Start > Control Panel >Sound > Playback tab

Look for Speakers...right-click and Disable
Look for the Headphones....right-click and Set as Default Device
 

2 more replies
Answer Match 47.46%

A big hello to everyone. This is my second time coming here, albeit with a different problem, and one that is a lot more annoying!
 
A week or so ago i starting getting occasional redirects and popups to pages that start with "syndication.exoclick" whenever I browsed the Internet with Google Chrome. I cleaned it (deleted all browsing data, signed out of the browser and back on) and it was fine for a day or two. As of today, the problem has gotten much worse. I keep constant redirections to pages starting with "adfoc.us" - over half of the tabs I open are immediately taken over and redirected. Worst part is that it now works on Internet Explorer as well. It is also worth mentioning that I am not getting these redirects only on my desktop, but also on my Nexus tablet as well. The problem seems unconnected to my router, as today I've used my tablet on a completely different Wi-Fi half across town, while still getting the problem. I've ran TDSS cleaner, the Microsoft Security Essantials, Malwarebytes AntiMalware, which all reported 0 problems. I've also reinstalled Chrome, to no effect. 
As for the redirects, they ranged from Aliexpress to random cam sites, but now the adfoc.us started showing up, it only displays the adfoc.us page detailing how the system works (with a really annoying voiceover too) and nothing else. It doesn't even allow me the option to press the "Back" arrow, seems like it literally closes a tab I wanted to open and opens a new one with adfoc.us on ... Read more

A:Constant redirections on multiple browsers/devices

Here's the Attach.txt as well. I forgot to click the "Attach this File" button. >.>

4 more replies
Answer Match 47.46%

I have a 20FB running Win 10 with a Logitech K810 Bluetooth keyboard that I've been using with a corded mouse without any problems. I recently purchased M557 Bluetooth mouse and now, intermittently, but consistently, my keyboard stokes are inaccurate, with multiple repeating letters and extra spaces. If I turn my mouse off, the keyboard again works fine. Disconnecting and reconnecting both devices did not solve this problem. The Lenovo System Update utlility indicates that the device driver is up to date. The Lenovo supplied device driver version is 18.1.1546.2762. Nonetheless, I was able to solve this problem by updating the device driver from Window?s Device Manager to Intel?s latest driver, version 19.0.1621.3340.  

More replies
Answer Match 47.46%

When streaming Netflix, my computer is registering as a new device each time I play a movie. The Device ID is different when I check on all my registered devices (the only device that uses my account is my one computer). I have not changed any settings, reinstalled Windows, or made any drastic changes in the system. I do not use a router and am using Cox Communications as my ISP.

Does anyone know why this is happening? Does anyone have a solution?

For more detailed information, the original topic is posted here:

http://www.bleepingcomputer.com/forums/topic375957.html

I was informed by the admin "Animal" to re-post in this forum.

Thank you for any help.

A:Netflix-Computer Registering as Multiple Devices

Have you contacted Netflix about this issue?

1 more replies
Answer Match 47.46%

Hello,

I'll try to explain this as simply as possible... Currently, I have speakers, headphones and the headphone microphone plugged in. I'd like to record my Skype conversations using stereo mix, but stereo mix only picks up what goes through my speakers and not what goes through my headset. I've tried tinkering with the settings and haven't been able to get stereo mix to record what goes through my headset instead of my speakers.
How do I get stereo mix to record headphone audio instead of speaker audio?

For the past few hours, I've also been trying to get Audacity to record both stereo mix and my microphone. From what I've read, Audacity can't record two inputs at the same time, so is there a way to combine stereo mix and my microphone?

I'm using the latest Realtek HD drivers, if that helps any.

Thanks for your time.

A:Multiple audio devices, stereo mix and a microphone

You might want to check out VAC(Virtual Audio Cable). It is not a "free" program, so depending on you needs, it might help. here is a link to info about it:Virtual Audio Cable - Wikipedia, the free encyclopedia
and here is a link to download VAC:
Virtual Audio Cable - CNET Download.com

I used it myself to share music I was listening to over video chats. The program can be used in a number of ways. I no longer use, since I currently have a laptop with Stereo Mix, and that meets my needs just fine. Hope this helps.

1 more replies
Answer Match 47.46%

Hello.
Sometimes I watch movies using HDMI output from my computer. When I connect the HDMI cable windows also discovers new sound device. I want to redirect some of outputs to the television so I can use its speakers.
For now, what I do is that I disable the internal sound card and system automatically uses HDMI then.
Thank you for any help

A:Assign applications to multiple sound devices

In many systems, when you plug an HDMI cable into the PC Windows will automatically set the HDMI as the Default audio playback device. If Windows is detecting a new device it suggests the Video drivers (usually where the HDMI audio is generated) may not be the correct driver.

1 more replies
Answer Match 47.04%

I have a Cisco Linksys E1200 router. Three computers are wired to it while my laptop connects to it wirelessly. When I look at the network topology (Network and Sharing Center->See full map), it shows that my laptop is connected to E1200 (this one has the same name as the router but different icon. The icon has an antenna. Thus, I think it is some kind of wireless device) which is connected to a switch, then a hub, then to the E1200.

Why are there three devices between the wireless router and my laptop?

A:Why so many devices between my laptop and the wireless router?

Just a quick guess....

Is one of the "wired" computers set to use Internet Connection Sharing? My dad (80 y.o. and still buying the latest hardware) did that once in the XP days and had an issue similar to yours. He never lost connectivity, but took the long way to get there. Found the issue doing a traceroute.

1 more replies
Answer Match 47.04%

Basically, what's happened is that after transferring my old PC's data onto my new one, and putting that one in place of my old one, therefore hooking up my modem to it, my wireless devices have been having trouble connecting to the router. Everything's hooked up fine, and it was working perfectly before, but now my devices such as my laptop and Droid Pro can SEE the router (As in connect to it and say that they are getting excellent signal strength), but when I try to open my browser, it asks as if I'm not connected to anything at all. The PC that's wired to the modem through the router works fine, however.
 

A:Wifi devices can see router but not connect.

16 more replies
Answer Match 47.04%

SORRY FOR ALL THE BACKGROUND INFO

So I have had the same router for years now (Belkin f5d7623-4) and whilst its had its problems over the years its generally been okay. On my home network I have my Sony Vaio and my Asus, a ps3, both my iphone 4 and 5, my samsung tv, as well as my mum's acer netbook and her galaxy s3.

My iphone 4 is a few years old now and has for some time struggled to consistently connect and stay connected to the wifi, my asus had some problems but they were hardware related and I fixed them a couple of months ago. The acer netbook had been connecting to the wifi fine since my mum was given it when a few months ago it suddenly wouldnt connect and no matter what I did to the settings of the laptop or router it could not be solved, as my mum is not heavily reliant on technology we got her a long ethernet cable as a short-term fix. A few weeks later I wanted to use the internet functions of my samsung tv so I took the cable from the netbook as my mum wasnt there at the time. When my mum returned she complained about me having taken the cable but then found her netbook was working over the wifi again, since then it has stopped working with the wifi again. My vaio and ps3 have never suffered problems before and my 5 has only began to struggle since being water damaged.

SORRY FOR ALL THE BACKGROUND INFO

About 3 days ago I was in my kitchen where the wifi barely reaches and therefore paid no attention when my vaio lost connection and wouldnt regain it. It... Read more

A:Devices and router teaming up to fry my brain

With the iphone I would try to forget the wifi network under your settings and then trying to reconnect it. They have weird issues like this often and that usualy fixes the issues. I have also have seen issues in the past with how my wireless routers have been configured. I have seen issues with mixed mode configurations and such. Can you send me any information on how your wireless router is configured?
 

1 more replies
Answer Match 47.04%

Hi everyone. Ive been having a problem with my Netgear WGT624v3 router. Its broadcasting the WIFI signal ok. My devices pick it up but cannot connect. If i go and unplug the router and then plug it back in all the devices connect. They will stay connected for several hours but then the connection will drop. They can still see the router and they try to connect but i have to unplug it and then plug it back in, then they all connect again. Its happened with my phone, my laptop and my Kindle Fire. Any ideas guys? Thanks.
 

A:Devices sees Router but will not connect

can we see the following form one of the wireless pc when connected and working and the repeat ALL the tests when it disconnects

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------

------------------------------------------------------------------------
Ping Tests
If you cannot access the internet with this PC, then you will need... Read more

1 more replies
Answer Match 47.04%

A friend currently has a Belkin wireless G router and uses a D-Link DGL-3420 gaming adapter to connect her XBox 360 to her wireless network. This configuration works fine but she did have an issue where the connection was lost and the troubleshooting tool on the Xbox 360 recommended using an 802.11a connection to avoid possible interference problems. Apparently, the wireless Xbox 360 controller she uses broadcasts at 2.4GHz, just like 802.11g.

So, I'm looking at replacing her Belkin router with one that supports 802.11a. I see 802.11n wireless routers should support 802.11a/b/g devices but I was wondering if anyone here had any "real world" experience with connecting to a 802.11n wireless router using 802.11a.

Did it work for you? Have any problems?

Thanks!

Peace...
 

A:Anyone have experience with 802.11a devices and a 802.11n wireless router?

I've connected to my ZyXEL N router using an 802.11a adapter, worked just fine. That's a sample of one.
 

3 more replies
Answer Match 47.04%

I have a Linksys RT31P2 router which seems to be acting funny. What happens is it randomly seems to assign my pc different IP addresses. I have it set to hand out a max of 50 addresses (100 - 149) and my pc has always been .100, but for some reason yesterday it assigned it .134. It's really annoying because several of my programs need ports forwarded to work and having to change them in my router is tedious and unnecessary. Anyone know why this is happening?
 

A:How can I tell what IP address my router is assigning various devices?

8 more replies
Answer Match 47.04%

Hello,

I have a D-Link DIR-652 router, and I can see that it is broadcasting but I cannot connect through my laptop, tablet, or phone. Sometimes it will let me connect but other times it says it is unable to. I can connect when I plug into the router through a cable. I'm doing that now, and I did an ipconfig/all in case it's helpful to see that:
Windows IP Configuration

Host Name . . . . . . . . . . . . : Kyle-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
Physical Address. . . . . . . . . : 82-B9-A5-D2-D0-5B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : ASIX AX88772B USB2.0 to Fast Ethernet Adapter
Physical Address. . . . . . . . . : 9C-EB-E8-02-9E-37
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::7830:64d7:7d49:c0fb%18(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Friday, February 15, 2013 8:52:29 AM
L... Read more

A:Router is broadcasting but no devices can connect

12 more replies
Answer Match 47.04%

Hi

I have a THOMSON TG585 v7 DSL router and when I browsed devices connected i found 2 unknown devices and apart from my 2 pcs, a switch and a media player I have nothing else wired and the wireless option is disabled.
 

A:unknown devices connected to DSL router

Obvious question #1: do you learn anything by clicking on the unknown devices?

Obvious question #2: do the unknown devices correspond to the switch and media player (check the MAC addresses)?
 

3 more replies
Answer Match 47.04%

I use Fing for Android which shows me a bunch of info for connected devices on the router including their IP address and name, but sometimes it's not enough and I'm looking for a Windows 7 tool that does the same thing. Is there something I'm missing in Control Panel or command line or do I need to install a third-party tool?

A:Get router attached devices info

I don't know that Windows itself has that info, but if you log into the router itself (run ipconfig /all in command prompt, and use the default gateway as the address in a web browser) - this should give you what you are looking for.

Per example:

9 more replies
Answer Match 47.04%

It's been month reading and searching around forums but I just can't get it done. It's totally another level for newbie like me.
My laptop Samsung, desktop Alienware both got corrupted. Factory image being modified, download anti virus program but get mod become useless. Do not have admin rights on my own computer. Window firewall policy got mod but have no idea how to get it fixed. Window defender can't be run due to its service is missing. I have TEMP/TMP folder which can't be remove in my profile. All the files and folder is being shared but I did turn off sharing setting. Can't be delete due to admin access. Shortcut, and thumbnail have invalid path. Group policy is being mod which I'm totally clueless how to get it done. Workstation is running which I'm on a home network. Background process like CTF loader and COM keep running even thou I keep end the process. Window installer keep running but no idea what is it for. Window update keep searching but can't be install. Sometimes it get freeze. Registry is being mod, have no knowledge about it so don't dare to delete some of it. Cmd can't be run. Lots of svchost running in the svc. Did so many correction once restart everything back to square 1. Guys please help. Cause the one who did this is just staying right above me. So I'm clueless how I get it fix.

A:Computer devices got compromised using the same router.

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/581281 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

2 more replies
Answer Match 47.04%

Both my DSL modem router and a wireless surveillance system (cameras and receiver) use the 2.4 GHz frequency; of course, one inactivates the other.
Does anyone know a DSL modem router operating in another frequebcy range (fixed or adjustable)? :evil: :evil:
 

A:2.4 GHz for modem router and other wireless devices?

802.11a WiFi standard uses the ~5GHz frequency. These devices are considered enterprise class though and cost more than your normal wireless.

Have you tried changing the channel on your current WiFi gear? Changing it from 1 to 13 for example may be enough to make both your systems fit into the band.
 

2 more replies
Answer Match 46.62%

I've read other topics about it here, but my situation is somewhat unique.

1) I can successfully ping websites from the command line (PC)/Network utility (Mac), but can't open any pages in internet browsers. This applies to all devices/OS/browsers (Win 8, OSX, iOS, Android) as well as apps and software that requires Internet access in the household.

2) The incoming e-mails (in Mac mail app) go through.

3) I have 2 routers ? AirPort Time Capsule and the standard router from ISP. I tried them both, same zero result (ping - yes, browsing - no).

ISP hesitates to send help, they don't see any issues on their side of the line yet.

Not posting any logs since it's a multiple devices/routers situation.

Any ideas?
 

More replies
Answer Match 46.62%

Hello,

Switched over the internet service provider to Time Warner. We are using the same router we have used before the switch (which was also with Time Warner service provider) and everything was working FINE before the switch. But now, with the new modem from service provider something is wrong -- My roommate is unable to connect her laptop, and her phone to the wifi even though the network is being detected. I can only connect to my laptop, which was the laptop I had opened to verify connectivity when the Technician was there. Also, my I-phone is unable to connect to the network even though it detects it. It's very odd considering we had the technician come out to resolve this issue in the first place. Could it be that the DHCP server has been turned off, so it's allowing only one device to connect to the one IP address on the modem?
Or do we need to delete the wifi networks off of our computers and other devices? My roommate tried that on her devices and still didn't connect. Please help.
 

A:Unable to connect multiple devices to home wifi

Do you know if your new modem includes WiFi? Is so, when you tested the connection with the technician present, did they have you connect wirelessly to your existing wireless router or to the modem itself?

Assuming you are running some version of Windows on the computer that can connect, please go into the Windows DOS/Command prompt screen and run an IPCONFIG /ALL command. Then copy and paste the complete results of the command here.
 

1 more replies
Answer Match 46.62%

I didn't know which thread to post this topic in, thought this was the right one. Mods, if you think there is a more relevant thread to post this in, please make the necessary changes. Thank you. Onwards to my issue:

I just recently decided to dual boot my UEFI-based system between Windows 10 and Windows 8.1. Upon using EasyBCD to create a bootloader that only includes Windows 10 and Windows 8.1, I get this mess:

Can anyone help me figure out how I can get back a Metro-styled Bootloader that only includes Windows 10 and Windows 8.1? Thanks!

A:Multiple and unneeded boot devices on Metro Bootloader

Go back into EasyBCD and delete the entries you don't want.

6 more replies
Answer Match 46.62%

Hello, two days ago suddenly my Internet wireless connection stopped working. No Internet at all. After some research, it turned out that it was (and still is) working on one device (the iMac I am typing this message on), but has completely shut down for the other devices, for example iPads, a laptop, etc.

So far, I have unplugged the power of the wireless router, turned it back on after giving it a rest, pressed the WBS button, but there has been no progress. The connectivity is obviously up and running based on the one device. What actions should I take? Thank you in advance.

A:Wireless Connection Stopped Working for Multiple Devices

Make model of the router. If you plug laptop in via a cable can you connect, can devices see the router and what happens when you try and connect ie error message note if you have done a factory reset the password for wireless will go back to default or wireless could be disabled. Can you login to the router and confirm the wireless is active

2 more replies
Answer Match 46.62%

Hi Guys,
 
Simple issue: Paypal.com won't load on any device connected in my home, pc, laptop, mobile phone etc.
 
This can only lead me to believe it's a router realted issue though I can't seem to find a solution. I've factory resetted the router, changed it for a new one etc. and still paypal.com is unaccessable.
 
If I run a 'cmd' ping test on the URL, it attempts four connections and fails. The windows host files are fine and I've tried turning of all firewalls, anti-viruses, malwares for a short time to test. Still fail.
 
Does anyone know a solution I can try?
 
- Milko

More replies
Answer Match 46.62%

I'm trying to set up something at work and am looking for ideas. I'm trying to get multiple Roku devices to connect to a single computer which can then take control of them all (about 10 devices per computer). I'm thinking about something simmer to PuTTY where you can just connect to the devices and they will show up on different windows and from there you can take over control. No idea if there is any hardware/software that will be able to do something like this. Does anyone have any ideas?

More replies
Answer Match 46.62%

Hi there,
I find this problem very tricky to explain due to its weirdness, so my apologies if this explanation doesn't come across very well.

I have been dealing with a very strange problem in that for several hours of each day (usually in the evenings) my Ipad suddenly refuses to send and recieve mail via the Ipad mail app. Also, during these same periods my PS3 console is blocked from the playstation network. My PC running XP mostly remains fine except youtube is often inaccessible via my gmail login and some sites appear to slow down, while most sites (non-google related) appear to behave as normal.
 
Strangely, I am still able to access my gmail inbox via web broswers on both my PC and Ipad - but the Ipad app itself refuses to work at all.
The problem only exists for periods of a few hours each day and then everything returns to normal with no problems of notice.
After running a quick scan with Malwarebytes, it found "pup.offerware" which I removed.
 
Any help would be amazing! Many thanks and here is my log:
 
 
DDS (Ver_2012-11-20.01) - NTFS_x86
Internet Explorer: 8.0.6001.18702  BrowserJavaVersion: 10.25.2
Run by Username at 21:50:49 on 2013-09-04
Microsoft Windows XP Professional  5.1.2600.3.1252.64.1033.18.3071.2111 [GMT 12:00]
.
AV: AVG AntiVirus Free Edition 2013 *Enabled/Updated* {17DDD097-36FF-435F-9E1B-52D74245D6BF}
FW: Online Armor Firewall *Enabled*
.
============== Running Processes ================
.
C:\Program Files\Tablet\Pen... Read more

A:Google/Gmail access blocked on multiple devices

My problem no longer exists. Could this thread please be closed/deleted? I could not find how to do that myself.
Thanks.

3 more replies
Answer Match 46.62%

Hi guys,

Our ISP has recently changed our router from Prolink H6300G to Prolink H5004N.
Our Prolink H5004N is wired to the phone line.
All devices connect to the internet via WLAN.
No devices are attached to the router via LAN.

The unusual problem is, some wireless devices connect to the internet just fine, others connect intermittently.
Below are the list of devices:

ASUS Notebook PCs x 2 (connect)
MSI Notebook PC (connect)
Apple iPad2 (connect)
LG LED SmartTV (connect)
Sony PlayStation 3 Slim (connect)
RedFox Netbook (intermittent)
Samsung Tablet PC (intermittent)
Sony XPERIA Smartphones x 3 (intermittent)

It is not that the red devices could not connect, they do so, but a very irregular and on/off internet connection.

I am stumped by the variety of devices that constantly connect and those that do not.

Does changing from G to N may in any way cause this?

A:Unusual Wireless Internet Problem with Multiple Devices

All devices you listed are connected WIRELESS to the same Prolink H5004N?

Try to move these devices closer to the wireless Access Point (built in router). Just for a test
RedFox Netbook (intermittent)
Samsung Tablet PC (intermittent)
Sony XPERIA Smartphones x 3 (intermittent)

Does that fix anything?

9 more replies
Answer Match 46.62%

Hi, I very much want to know the answer to this problem. My setup is simple. I am working with my Mobo's onboard sound card (Mobo is Asus M3A32-MVP Wi-Fi) and here's the thing. I see multiple devices in both Vista and Seven (have a dual boot) - I see the front headphone jack, the SPDIF, the rear audio port (it's 5.1 surround) and also an HDMI. I've just recently bought two bluetooth headphones and I have paired them and see them in the audio devices panel too.

Now this is what I want to do. I want to hear the audio on all the devices simultaneously. If I turn on the audio system (connected to the SPDIF) then I should hear the audio there. If I connect multiple Bluetooth headphones, I should hear the audio from my comp on any and all of them.

So, why can't I do this? Apparently this was the default behaviour for Windows in XP. That is, any audio played was available on all connected devices. Now, here in Vista and Seven we have a major downgrade in that we have to select a SINGLE audio output device as the "default" device and when a device is selected as such, the audio stream is SOLELY passed into it. THIS IS SO VERY WRONG! It is so illogical to do something like this in today's world of changing and evolving multi-media environments. I mean, what if my Mom wants to hear my music from the kitchen at the same time that I'm listening to it as I work on my desktop. She should be able to simply plugin and start listening to what I'm hearing! This is RIDICULOUS!

I ho... Read more

More replies
Answer Match 46.62%

I can connect to the Internet with my wireless router just fine, but only certain websites will load normally.  So far, these include Google, Gmail, Youtube, Facebook, and Wikipedia.  Most other websites just show that they are loading forever and nothing ever comes up.  I've already tried power cycling/resetting everything.  
 
As an example of what it says when I ping a website that doesn't work:
 
"C:\WINDOWS\system32>ping www.reddit.com
 
Pinging www.reddit.com [198.41.209.137] with 32 bytes of data:
Reply from 192.168.1.1: Destination net unreachable.
Reply from 192.168.1.1: Destination net unreachable.
Reply from 192.168.1.1: Destination net unreachable.
Reply from 192.168.1.1: Destination net unreachable.
 
Ping statistics for 198.41.209.137:
           Packets : Sent = 4, Received = 4, Lost = 0 (0% loss),"
 
I also can't connect to Skype.  Itunes doesn't respond upon launch, but only while I'm connected.  It works normally while offline.
 
My phone has the same Internet problems while using wi-fi, but not while using data.
My Xbox One can connect to the Internet, but not to Xbox Live.  When I test its network connection, it says "DNS isn't resolving Xbox server names"
 
 
What's also strange is that my roommate isn't having these problems on his computer and phone even though we use the same wireless router.

More replies
Answer Match 46.2%

Hey guys,

Just a quick one I'm sure most could answer, I'm a bit of a novice when it comes to Wifi, and my router is kicking devices off when we have more than 4, picking and choosing which devices it will allow Wifi too. We often have 3 phones, 2 laptops and 1 PC in the house which need constant connection. What do I do to make this happen?

My Router is a D-Link: DSL-2780, I'm with Talk-Talk in the UK.

Thanks in advance!
 

A:Solved: Router kicks Wifi devices off.

16 more replies
Answer Match 46.2%

Just recently my Lenovo laptop w/Windows 8.1 will not connect to my Vizio wireless router but it was fine a few months ago. This laptop will connect to my AT&T modem/router.
All my other wifi devices connect to both routers. The only one that does not is the Lenovo laptop with Windows 8.1. I suspect the last windows update screw up my connection. My laptop will connect to Vizio router wired. Every time Microsoft updates I get problems. Vizio router is xwr100. Any suggestions?

A:All devices connect to router except Windows 8.1 Laptop

If you are using both the Vizio router and Att gateway, you would need to place the Vizio behind the Att gateway in a DMS Plus zone

7 more replies
Answer Match 46.2%

Hello,

I have 4 apple devices in house. 3 on 5ghz connected to access point, and 1 on 2.4ghz.
its a belkin router, model N10117.

the belkin router is connected to a virgin router.
thier is a setting on the belkin router, which allows you to use it as an 'access point'.

all 4 devices can connect perfectly. and use programs like 'VLC remote' perfectly.

but when it comes to itunes on the pc, after setting all the apropriate settings on itunes,
itunes is unable to see all 4 devices for 'wireless syncing'.

ive come to a hault, and stuck :/
many thanks in advance,
stuart

A:Router 5ghz and 2.4ghz not see apple devices?

as etc info -

I have virgin router 4 lan ports - port 4 is connected belkin N10117 router, and setting is set too 'act as access point'.

PC is connected to virgin router via LAN...

is it something to do with the IP address maybe?

stuart

4 more replies
Answer Match 46.2%

I was having issues with my old router so I got a new linksys AC1200. I have some devices that use 5.0 and they're working fine but my other devices are very sporadic and only work for maybe 30 seconds before losing connectivity then start working after another 30 seconds or so. Wired devices work fine
 

A:Dual band router devices work on 5 ghz but not 2.4

If you have a Windows PC with the problem ...

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If you need help with a screen shot see TSG Posting a Screenshot. FWIW to take screen shots with Windows Vista or latter I prefer to use the built-in Snipping Tool.

Identify your network if it is not obvious.
 

1 more replies
Answer Match 46.2%

Hello,

Yesterday afternoon, my internet appeared to have gone down. I attempted to fix it in the usual way (turn it off and on) but to no avail. I assumed it must be on the ISPs end and continued on with my day.

The internet was still not working this morning, so I checked to see if it might be the router that is causing the issue. Lo and behold, I can access the internet through the modem. Great, router is bust.

Reconfigured it, I updated the firmware, and then did a series of ping tests.

Ping test to google through the ethernet was successful. Ping test to router IP address through the router was successful. Ping test to google through router was unsuccessful.

Does anyone have an idea what the problem might be? Just to reiterate, this is an issue across all devices (Mac, PC, iPhone/iPad, Android, PS3, etc... )
 

A:Router spontaneously stops working across all devices

Hopefully, you know and can still log into the router.
find the WAN side, specifically Router Status or that display that
shows:

IP Address (the public address, not 192.x.y.z)
Default Gateway (your connection to the ISP)
DHCP Server (will not be one of your lan addresses)
Subnet Mask

DNS Server
Lease Obtained
Lease Expires
if any of the first three are missing, then the modem did not feed the information to the router
OR the router did not save it.

disconnect the modem->router
power off both
wait one minute
power on the modem
connect the router (but still powered off)
when the modem is fully sync'd with the ISP
power on the router
from your computer

ping 8.8.8.8 (a ping by address)
nslookup google.com (a dns request that should resolve to an address)

ping google.com (a ping that requires nslookup to work)

 

8 more replies
Answer Match 46.2%

I have a new tower (desktop computer). When it's powered on (active or sleep mode) it will boot all other devices in the house using the router (another desktop, 4 laptops, and 2 game consoles via ethernet or wifi connection - doesn't matter). The new tower does NOT have wifi and does NOT have to be connected to the router via ethernet to cause the disconnect.

Here's what the utility brought up about the tower:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , 64 bit
Processor: AMD Phenom(tm) II X4 B55 Processor, AMD64 Family 16 Model 4 Stepping 3
Processor Count: 3
RAM: 4095 Mb
Graphics Card: ATI Radeon HD 4800 Series , 1024 Mb
Hard Drives: C: Total - 430697 MB, Free - 388993 MB; D: Total - 999997 MB, Free - 763832 MB;
Motherboard: ASRock, 770 Extreme3,

Photos from device manager are located here.

Senario: Josh is playing on his laptop via ethernet. Bill is on his via wifi. I'm watching Netflix on the Wii on TV. Eric fires up his new computer, hasn't even put his password on the login screen and everyone is booted offline.

Here's the list of devices and how they connect to the 2Wire DSL router (which works fine until the new tower is powered on, and it's the ONLY thing able to connect to the internet):

NewPC - Desktop - W7 - ethernet
OldXP - Desktop - XP - ethernet
HollyPC - Laptop - Vista HP - wifi
JoshPC - Laptop - W7 - ethernet
BillPC - Laptop - W7 - wifi
RyanSPC - Laptop - W7 - wifi
X... Read more

A:New Computer Boots All Other Devices From Router/Network

8 more replies
Answer Match 46.2%

Recently installed a new motherboard -- ever since then I've been randomly disconnecting all users on my network -- four different computers usually. I've tried everything we can think of, including anti-spyware scans and antivirus scans, reinstalling ethernet drivers on the onboard ethernet, using a different ethernet card, releasing/renewing IP address, etc.

My friend told me to run a scan, and I removed two proccesses already but this is the update log I have for right now:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:59:11 PM, on 7/8/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Grisoft\AVG Anti-Spyware 7.5\guard.exe
C:\PROGRA~1\Grisoft\AVG7\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVG7\avgupsvc.exe
C:\PROGRA~1\Grisoft\AVG7\avgemc.exe
C:\Program Files\NVIDIA Corporation\nTune\nTuneService.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\RUNDLL32.EXE
C:\WINDOWS\SOUNDMAN.EXE
C:\Program Files\Winamp\winampa.exe
C:\Program Files\Java\jre1.6.0_01\bin\jusched.exe
C:\PROGRA~1\Grisoft\AVG7\avgcc.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe
C:\... Read more

A:[SOLVED] HijackThis Log -- Disconnecting all Devices on Router

Any help, please?

8 more replies