Tech Problem Aggregator

Sound Stuttering when connected via HDMI

Q: Sound Stuttering when connected via HDMI

Decided to run this old laptop to my TV so that I could watch shows from online. When I connected using an HDMI cable the sound cuts in and out very bad. Thought the cable might be bad so I switched it out for a new high dollar cable but still has the same problem. Issue occurs both streaming and when testing using system sounds (such as "test" in the sound setup in device manager). Running Windows 10 (64-bit) and have installed all system updates and have tried updating the audio driver but it is saying I have the most up to date driver. Any help would be greatly appreciated.

More replies
Answer Match 70.14%

I get no sound when I connect my hdmi monitor my laptop

My monitor has no sound

How do I keep the sound on my laptop?

Thanks
OM
 

A:No sound when hdmi monitor connected

Try clicking the speaker icon in the lower right corner of your monitor, click playback devices, your monitor should be listed there and you need to set it as default.
 

3 more replies
Answer Match 70.14%

Hi everyone, I just got a new sound bar (Yamaha YAS-105) which only supports Dolby Digital 5.1 (AC3, I think) and I want it to smoothly transcode all of my DTS or newer audio to a multi stream AC3 in both MPC player from the latest K-lite mega pack, VLC and Winamp, or rather, if possible, just in general. If I play something thats DD5.1 in K-Lite's MPC it neatly picks up the audio and displays it as DD on my sound bar, same thing goes for DD5.1 in VLC etc. but as soon as I play something in DTS or higher there is no audio. I've been googling and tweaking the settings already and after messing around a bit it does play sound through MPC but none of my Dolby lights light up on my device and it doesn't sound like 5.1 either, the weird thing is that no lights go on, not even the PCM light just the TV light is connected and it gives a sort of stereo with subwoover sound (so 2.1). If anyone can help me out I'd be very grateful, I know it's possible because it works with media boxes as well, I just can't get it to work on windows... Any extra info, I have an Alienware X51 RC1, Soundbar is a Yamaha YAS-105, like I said it's hooked up via HDMI to my TV and my TV through a Digital optical cable to my soundbar.

More replies
Answer Match 70.14%

Hi.  Last week and prior mths HDMI connection worked, TV had sound.  This weekend, 8-20-16, TV sound went away but still had video.  Looked at forums, utube and did the control panel sound device manager.  the Digital Display Audio-AMD High Definition Audio Device; not plugged in is grayed out.  clicked on it to no avail.  the set default is also grayed out so i cant even set a default.  PC speakers do work.  bought a new HDMI cable but no change.  all the drivers are up to date.  not really sure what happened.  worked for months and now no sound.  any idea????

More replies
Answer Match 70.14%

Hi folks, so I got a new pc and connected it to my LG 42LV550T using a DVI to HDMI and 3.5mm from line out (and tried headphone socket) to the 3.5mm audio in (RGB/DVI) socket on the TV but I don't get any sound on the TV.
I connected the PC to my stereo using the line out and headphones socket with 3.5mm to stereo/phono plugs and I get sound, but I would like the sound through the TV and then the TV connected to my stereo for better sound all round.

I know DVI doesn't carry sound.

I had a chat on LG support with no help

Any ideas ?

PC specs.
OS Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 8082 Mb
Graphics Card: Intel(R) HD Graphics, -1984 Mb
Hard Drives: C: Total - 953516 MB, Free - 897064 MB;
Motherboard: Gigabyte Technology Co., Ltd., H61MA-D3V
Antivirus: Windows Defender, Disabled

Thanks TechnicalH1
 

A:DVI to HDMI and 3.5mm audio connected but no sound

16 more replies
Answer Match 70.14%

Hi, I was wondering if someone can help me. I updated to windows 10 some months ago and realized my beats audio panel was gone. I few day back I re installed the High Definition Audio Device drivers and beats audio seems to came back. I recently bought a denon amplifier and noticed very low sound when I connect the notebook to the amplifier through hdmi.Is the hdmi sending the wrong signal? are there any new drivers for hdmi controllers or realtek sound card? Thanks a lot in advance!!!

More replies
Answer Match 70.14%

Hi, I was wondering if someone can help me.

I updated to windows 10 some months ago and realized my beats audio panel was gone. I few day back I re installed the High Definition Audio Device drivers and beats audio seems to came back.

I recently bought a denon amplifier and noticed very low sound when I connect the notebook to the amplifier through hdmi.
Is the hdmi sending the wrong signal? are there any new drivers for hdmi controllers or realtek sound card?
My laptop is a HP envy 17 j011nr (i think so) core i5 beats audio
Thanks a lot in advance!!!

A:Low sound when connected to amplifier through hdmi

Realtek shouldn't even be involved with the HDMI sound. I suggest to update your laptop's drivers and use "Intel Display Audio" as your HDMI driver. Set the volume to max then you're good to go.

2 more replies
Answer Match 70.14%

Hello, I just bought an HDMI cable to connect from my HP Pavilion x360 onto my TV. Unfortunately, I only get video on my TV but no audio. The audio only comes from my Pavilion x360. I am aware of right clicking the volume icon and clicking on "playback devices" to set defult the HDMI cable or TV. Unfortunaly, this is not visible even after enabling the disconnected and disabled devices. Please, anyone help so I can get the audio on my TV as well? I've let a screenshot. As a reminder, my HDMI is connected on both sides, and I have both disconnected and disabled devices visible. Thank you!

More replies
Answer Match 69.3%

www.sevenforums.com/sound-audio/228558-hdmi-sound-output-problems-2.html

Dear Experts

I am using windows 7 64 bit on my desktop (motherboard ASUS P5E)
ASUS - Motherboards- ASUS P5E

And I installed VGA SAPPHIRE HD 3870 (ATI RADEON Technology) 512 MB.
This VGA has a converter plug from DVI to HDMI.

Connected a 3 m HDMI cable from a converter to the Samsung TV.

I can see a picture on the TV but no sound

What I did for troubleshooting

1- download latest driver from AMD website from the link below :
AMD Catalyst
2- Follow the instructions here :
How to Set Up Audio on an ATI Radeon HD | eHow.com

No audio from HDTV when playing audio / video from a computer system

3- Digital Audio (HDMI) option was grayed out (not clickable) as can be seen in the snapshot below :

http://i46.tinypic.com/2d10aba.jpg

A:SAPPHIRE HD 3879 connected to TV via HDMI no sound

What is a Sapphire HD 3879? I can't find that model. I see a Sapphire HD 3870, is that what you mean?

Regardless, you aren't getting audio because DVI doesn't carry audio, so converting from DVI to HDMI won't give you audio.

8 more replies
Answer Match 69.3%

I have the same issue in windows 10 home 64 bit-
HDMI monitor no speakers-no sound from anywhere when connected?



When I right click on the volume control, the options it shows are:
open volume control
playback devices
recording devices
sounds
volume control options

It does not give me a properties option.

Then I went to control panel and searched for sound. Then I saw the screen below. There was a Digital Audio as well and I clicked 'Don't use this device(disable)' on it by mistake and clicked OK.



Now, I only have Speakers option. How do I get the Digital Audio option back in here? I think that will solve my original problem.

Thanks

More replies
Answer Match 69.3%

I have connected my HP Laptop with Windows 8 to my TV through an HDMI port. I watch netflix and youtube. A couple times a day the sound will just quit working. I check the audio and it says it is still hooked up to the TV. The only way I can figure out how to get it working again is to restart the computer. This has never happened while audio was playing, just when it is not in use for a little while.

Any help would be appreciated.

Thanks!

Luke
 

A:Laptop connected to TV through HDMI Sound turns off every now and then

HP has tens of thousands of different laptops. Which exact one do you have? The full model number will be on a sticker on the bottom and will be similar to DV9240ca or DV6-2130us.
 

3 more replies
Answer Match 69.3%

As the title says, I've tried connecting my TV to my computer with an HDMI cable, and the video part works, but no sound plays. When I checked the list of playback devices, the TV appeared (as shown below), but it apparently cannot play sound.

I don't think I know anything beyond what I've posted, but if anyone could help me out with this, I would appreciate it.

Also, as a side note - I am completely unable to interact with any of these objects - I cannot set something as a default device; there is no response when I do it, and disabling the audio device only works until current sources of sound (like videos) are restarted.

A:LG TV not playing sound when connected via HDMI cable

If you highlight the LG TV you should​ be able to set it as default. If not, it sounds lik a permission issue (like non-admin account).

2 more replies
Answer Match 69.3%

I used to be able to connect my r11 to the TV and get sound.  For some reason, this has now stopped.  I have been through all the forums and tried various options to no avail. All help gratefully received.

More replies
Answer Match 69.3%

I have an external monitor with no speakers I use as a dual display along with my laptop monitor. No sound comes out of my laptop speakers nor when I hook up external speakers to it while I have the external monitor hooked up by the HDMI cable. Is there anything I can do to get this to work?
Thanks,
Bill

A:HDMI monitor no speakers-no sound from anywhere when connected?

Right click on the volume control and then Properties,

When you connect the HDMI it becomes the default output device, even though it has no speakers.

You need to change this back to "Speakers" and set as default.

5 more replies
Answer Match 68.46%

I just installed a gigabyte hd4350 in my hp a1520n desktop bc it has an hdmi output. picture looks good, sound works, however when the hdmi cable is connected to the my samsung lcd tv, i get no sound through my computer speakers even when im not using the tv as a monitor or when the tv is turned off. i get sound through the tv though. when i unplug the hdmi cable from the tv, i get sound on the computer.

is there a fix for this? i have onboard sound enabled in the bios.

i have windows xp 32bit. in the sound and audio device properties, under the audio tab, default device, i see both realtek hd audio output and ati hd audio rear ouput when the hdmi cable is connected. when its not connected, just realtek hd audio is available.

i know i cannot have sound coming through the tv and computer speakers at the same time. is it possible for the sound to be switched back to the computer speakers when the tv is off WITHOUT having to unplug the hdmi cable that goes to the tv?
 

A:no sound through computer speakers when hdmi cable connected to tv

Weeell. Have you even tried setting the "Default audio playback device" (or whatever, in control panel->sounds->defaults tab to Realtek HD audio when the cable is plugged?
 

3 more replies
Answer Match 68.46%

Hi

I have connect my laptop using an HDMI cable to my TV. And from my tv I have connected my two HiFi speakers. When the TV is on an AV channel I have sound coming from the TV and HiFi speakers but when I switch it to the HDMI source channel, sound only comes from the TV and not HiFi speakers.

This is frustrating because I want to watch movies on my TV through my laptop and get the feel of some surround sound through the HiFi speakers but it is not working!!!!

Please Help!

Thanks

A:No sound to HiFi speakers when HDMI Cable Connected

The problem is not your PC but your TV and how it handles HDMI audio. There is nothing we can do for this, it is strictly an issue with your TV and how it routes audio internally (or to external devices).

2 more replies
Answer Match 61.74%

Had to replace motherboard from authorized acer parts dealer now I get no sound through HDMI port. I did through the original board until it got fried by electrical surge. Can any one help or send me a picture of the inside the same model to make sure all jumpers on the motherboard are in the right spot. Or if any one else had this problem tell me how you fix it. It does not have HDMI sound icon in the mixer. What I have done:
1. I have looked for disabled devices.
2. Tried looking in sound mixer settings for the default audio.
3. New install and drivers.
4. Tried a system utility software RegInOut. Looking for serious replies on fix even if it was not an Acer.

specs:
AMD Athlon II X4 Quad-Core Processor 640,
Windows 7 Home Premium,
NVIDIA GeForce 9200 Chipset, NVIDIA GeForce 9200 Graphics Integrated ,
4096MB DDR3 Memory,
1TB SATA Hard Drive (Green Product ? variable RPM),
16X DVD?R/RW SuperMulti Drive,
Multi-in-1 Digital Media Card Reader,
802.11b/g/n Wireless,
High Definition Audio with 5.1-Channel Audio Support,

Any help appericated

A:NO SOUND TROUGH HDMI ON ACER AX3400-U3032 and No HDMI Icon in sound se

Welcome to the Seven Forums

One thing you could try is to open up the Control panel then click on Sound and then go to the Playback tab and see if there is anything in there to enable it that's what I had to do on my laptop.

Jerry

9 more replies
Answer Match 58.8%

Hi there, My sound is not working. I only have a HDMI Sound output. However, I don't have any HDMI Output in my computer. I reinstalled windows a couple of times lately, but i don't know for sure if thats the problem.
Right now im using Windows 7 32-Bit, My hardware specs are: CPU: Intel Duo 2 Core. Graphics Card: AMD ATI Radeon HD 3800 Series. Any help or such will be Very much appreciated

A:Sound not working, Only have HDMI Sound Output, But no HDMI port in PC

the HDMI sound is most likely off your GPU but that series seems to not have a HDMI port so that is odd. If you can make sure your onboard audio is on in your BIOS and also run the tool on this page so that you can update all your system info for us. System Info - See Your System Specs

3 more replies
Answer Match 55.02%

hello all
a week or so ago my sound on my pc became crackely and stuttering , i first noticed it while useing flight simulator , i thought it would be related to that but i get the same problem in windows media and div-x .
i have a build in sound on my ASUS P4S8X-X MOTHERBOARD , I have the up to date drivers and the soundMAX audio control package ( that came with the motherboard ) installed , i have 5.1 souround sound speakers ,
i have tried swaping cables around , different speakers , different settings on the control panel ,etc , no use

one other thing , i tried to use a voice control system for the flight sim (voice buddy ) and i could not get the mike to work or pick up my voice no matter what i did in settings ,
it may not be relevent but it all worked fine before i did a reinstall a few weeks ago with a bigger hard drive
runing XP with service pack 2

any help gratefully recived , the pc is hopless without sound
thank you
Bryan

A:Sound Problem , Crackely And Stuttering /built In Sound

Try uninstalling Voice Buddy. If the sound is OK, then you know it was either a corrupt install of Voice Buddy or a setting in the program needs tweaked
Mark

6 more replies
Answer Match 54.18%

Hey, I've been looking for help for this for 2 days straight and still haven't found any help.

Basicly about 3 or 4 weeks ago, my motherboard or graphics card went, i had the computer repaired and it arrived a few days ago.

I've plugged it all in but i can't get any sound.
I've changed my Bios, uninstalled and reinstalled drivers, did some roll backs, plugged in the S/pdif cable altered my properties and still no luck.

Can anyone help me?

The screen shot below is of what my Playback Devices panel looks like when iTunes is on.
I'll give any information i can.
 

A:HDMI to HDMI, Great Picture, no sound. Need Help.

9 more replies
Answer Match 53.76%

Hi,

I'm having problems with my sound, i am getting a stuttering sound more and more frequently when watching videos online/dvds.

I have tried going into the device manager and updating my drivers in the sound section, but apparently they are up-to-date. Really don't know what to do next!

I have a Toshiba laptop, satellite series. I've had no joy on that website with support. I am using Windows 7.

Any ideas?!

Thanks!
 

A:Problems with sound when watching dvd, stuttering sound

Hmm well first of all Id make sure that you are experiencing this problem while watching dvds as well as online. The reason I say this is because if its just online it could be bandwidth and if its just the dvd, it could be the damaged media.

Assuming you are consistently having sound issues watching videos online and via dvd my first guess would be overheating.

Do you have the ability to play sound files without issues? Is the problem only with video?
 

1 more replies
Answer Match 52.5%

hello 
when i connect my TV ( samsung) with HDMI to my Sony vaio i can not play the audio on the TV( after i commute to AV- HDMI ) 
only after i reboot my laptop with the HDMI connected. 
after that i can play a movie with audio on TV. 

can u tell me why ? 
i run Win 8.1

thank you 
Alex 

More replies
Answer Match 52.5%

I have a HP Pavilion dv4-1435dx laptop. TV is Dynex LCD (one of those no name brand ones ) I checked the drivers on the laptop, they all seem to be up to date. However when I go to Control panel-Sound-Manage audio devices, there is no icon with an HDMI label to select for playback device. How do I add the driver for HDMI (to select)?

I have scanned (and tried) numerous suggestions on this type of a problem on different sites on the web (including this one, under a different thread)

Any suggestions, other than try a new cable?
Thank you in advance.

A:No audio When PC connected to TV by HDMI

Welcome to SevenForums.

In Sounds / Playback make sure it is not disabled and hidden.
Rt click on the Sounds / Playback window to make sure "Show Disabled Devices" is checked.

If it is not there open Device Manager to see if is listed and there are no errors.
You can open Device Manger from Start/Search

3 more replies
Answer Match 52.5%

Hello everyone!

First of all i would like to thank everyone for the answers and help you share and i am new to this forum. I tried to search before making this thread but i havent found any answer that could help me.

I just bought 2 LCD monitors ( Acer and Asus) they all work perfectly But i have a problem, a huge one. The Asus monitor refuses to work when the VGA (acer) is connected and vice versa.

The Asus is a 23" LCD monitor, its connected via HDMI.
The Acer is a 18,5" LCD monitor, its connected via VGA.
My laptop is an Acer 7736, 2,20 GHZ, 4 GB RAM, 1GB graphic card from ATI Radeon.
So i beg you please to help me, i have tried everything possible, been trying for the last 7 hours and i even downloaded Ultramon but it doenst work either.

I only want them to work in same time, what can i do?

Here is the link, i even tried updating the drivers on the graphic card but nothing works.
Thanks in advance!!!

A:HDMI trouble when VGA connected

A lot of laptops do not have the ability to go to more than two monitors (Edit: this is including laptop as monitor). You can probably have both work if you close your laptop lid, otherwise, only the laptop and VGA or laptop and HDMI will work. (Edit: if you close laptop lid, the two monitors VGA and HDMI will work but only with laptop monitor closed)

I think there is a piece of hardware you can purchase that can turn a USB port into and external display adapter, but I don't know if it was GFX card specific or if your card needs or supports a particular piece.

My laptop suffers from this as well. I tried it and confirmed it after seeing issue on this forum a few weeks ago.

9 more replies
Answer Match 52.5%

First of all sorry if it's not that Windows related!
So the problem is that my LCD TV has a scrambled picture when my computer is turned on and connected to the TV via HDMI. I got analog signal TV connection but the picture is fine while the PC is turned off. Yeah I know I should get digi TV but till then I would like to sort this out. The TV is a Samsung 40" LCD model LE40A336. It has 2 HDMI input ports. Tryed both with same results. BTW if I remember it right, I had the PC connected via VGA last weekend and didn't have this problem. I will double check it in the morning.
Maybe I'm using wrong setting with PC... wrong Hz or sth. Anyhow maybe someone has had similar problems and solved it.
PC:
GTX 470 DVI->HDMI
i5 2500K
Windows 7 x64
EDIT: The TV is the only monitor connected to the PC via HDMI. Sound is passing through the HDMI cable aswell.

A:TV scrambled while PC is connected via HDMI

  
Quote: Originally Posted by karelo


First of all sorry if it's not that Windows related!
So the problem is that my LCD TV has a scrambled picture when my computer is turned on and connected to the TV via HDMI. I got analog signal TV connection but the picture is fine while the PC is turned off. Yeah I know I should get digi TV but till then I would like to sort this out. The TV is a Samsung 40" LCD model LE40A336. It has 2 HDMI input ports. Tryed both with same results. BTW if I remember it right, I had the PC connected via VGA last weekend and didn't have this problem. I will double check it in the morning.
Maybe I'm using wrong setting with PC... wrong Hz or sth. Anyhow maybe someone has had similar problems and solved it.
PC:
GTX 470 DVI->HDMI
i5 2500K
Windows 7 x64
EDIT: The TV is the only monitor connected to the PC via HDMI. Sound is passing through the HDMI cable aswell.


the VGA doesn't transfer data signals through digital technology, it uses analog, that's why the picture appears correct on the VGA, the HDMi though uses a technology called HDCP handshaking, the PC needs to handshake the display for it to show the images being encrypted from the desktop, if that handshake doesn't take place then the image will appear scrambled.

you can read up about HDCP here High-bandwidth Digital Content Protection - Wikipedia, the free encyclopedia but your options are just to use the VGA cable, or if it is a software fault then ... Read more

6 more replies
Answer Match 52.5%

I have Quadro DVD-922 connected with HDTV via HDMI.

Video output is set to HD, but when I try to play an HD file - it doesn't work.

What should I do to be able to play HD videos?
 

More replies
Answer Match 52.5%

I just connected my VIORE hdmi to my new PC with Win 7 Ati Radeon graphics and my screen picture is bigger than the display. Icons are cut in half on the left, cannot see start or time on the bottom or left or right. Display section calls it a CV TV15

how do I adjust the screen logical to fit the screen physical. This is the 1st monitor I have had that did not have buttons do do this
 

A:VIORE HDMI WIN 7I just connected my VIORE hdmi to my new PC with Win 7 Ati Radeon gra

You need to adjust the graphics settings for the correct resolution for the TV.
 

2 more replies
Answer Match 52.08%

I wish to connect the HDMI to a video projector and the audio port to a sound mixing desk. Either audio or video works fine alone but when both cables connected am getting high-pitched feedback into the sound system. I have tried disabling HDMI as an audio device but it makes no difference. Have tried more than one HDMI and audio cable - same result.  

More replies
Answer Match 52.08%

Today my notebook Asus M50Vn suddenly started to behave weird. While it's connected to plasma via HDMI, everything starts to stutter a bit, which is very inconvenient in videos. It works like this: 0,5 s of fluid picture, 0,1 s of freeze, 0,5 s of fluid picture, and so on.

Situation is the same on primary (built-in) monitor and secondary (plasma), as well as on youtube, VLC, PotPlayer and MPC HC. DXVA and CUDA won't make any difference, choosing different video renders in player's settings won't do the help as well. I've already tried to install older and newer drivers (graphics is Geforce 9650m GT) but it didn't help.

Computer is 100 % virus free, there is COMODO IS for on-access security and I've also checked it with malwarebytes, hitman pro, emsisoft emergency kit, kaspersky tdss killer and CCE. Almost all processes are disabled.

It's interesting because there's no problems when plasma is connected via VGA.

Unfortunately there's no useful system restore points.

Does anybody have any idea what could be wrong? Thanks in advance.

More replies
Answer Match 52.08%

Nothing is showing up on the TV. I selected the Extended screen option & nothing. I looked in Display Settings & no second screen is being detected. Even though on the TV itself. It reads that a HDMI is connected to the specific HDMI port. Windows 10 says my Drivers are all updated & my Displey Driver is AMD Radeon R7 200 Series

A:HDMI connected to Monitor & the other end connted to TV

If the title of your post is accurate.....then that will never work. You have to connect the TV to the PC with an HDMI cable and then do the same thing for the monitor. You need 2 cables. No other way around it.

3 more replies
Answer Match 52.08%

Today my notebook Asus M50Vn suddenly started to behave weird. While it's connected to plasma via HDMI, everything starts to stutter a bit, which is very inconvenient in videos. It works like this: 0,5 s of fluid picture, 0,1 s of freeze, 0,5 s of fluid picture, and so on.

Situation is the same on primary (built-in) monitor and secondary (plasma), as well as on youtube, VLC, PotPlayer and MPC HC. DXVA and CUDA won't make any difference, choosing different video renders in player's settings won't do the help as well. I've already tried to install older and newer drivers (graphics is Geforce 9650m GT) but it didn't help.

Computer is 100 % virus free, there is COMODO IS for on-access security and I've also checked it with malwarebytes, hitman pro, emsisoft emergency kit, kaspersky tdss killer and CCE. Almost all processes are disabled.

It's interesting because there's no problems when plasma is connected via VGA.

Unfortunately there's no useful system restore points.

Does anybody have any idea what could be wrong? Thanks in advance.

A:Notebook Is Slow While Connected To HDMI

Well normally I'd have said it was just your laptop struggling to upscale the image due to hardware limitations. But a 9650gt should be more than capable.
What happens if you disable the laptop screen and just use the tv as a primary monitor?

Erm.. Try a different HDMI lead and lower the resolution a little. But that's clutching at straws lol

5 more replies
Answer Match 52.08%

Hi,
I just did a fresh install of Win 8.1 last week and my TV which is connected via HDMI is not getting detected as a display on my PC. My monitor was detected fine.

When i right click my desktop and go to screen resolution, the TV doesnt show up there even post clicking detect. Same if i go into AMD CCC and click on detect.

However Win 8.1 can detect it. The TV is seen in device manager under digital media device and i can see the TV under Devices and Printers in Control Panel. I've tried troubleshooting it but it says everything is fine.
But I need it to come up as a display so i can use it as a primary display at times or to duplicate display.

I had no such problems with Win 7. It would detect right off the bat.

Things ive tried:-
I've installed the Omega 14.12 drivers and the Beta 15.4 drivers.
I've tried installing them in Win 7 compatibility mode too, but the installer then wouldnt give me the option to install the display driver and the HDMI audio driver.

One thing i notice is that the driver for the TV is provided by Microsoft and the date of the driver is 6/21/2006! So maybe this needs to be updated. I tried to click on update driver but it says my driver is up to date.

I also have all the latest windows updates installed.

so not sure what else to do here.

Please help.

A:Win 8.1 - TV connected via HDMI not detected as a Display

The 2006 device driver is simply the generic one which is normal, same one I get when TV is plugged in.
What HDMI port are you using? One on motherboard or one coming directly from GPU? This almost has to be a graphics driver problem.
Why would you try installing drivers in 7 compatibility mode? We are talking 8.1 here right? Have you tried drivers from manufacturers site?
A laptop or desktop? Motherboard and GPU make/model?
So, so many details you've left out.
Would help to have some system specs.

5 more replies
Answer Match 52.08%

Hey guys,

I'd really appreciate your expert assistance!

I've got an Origin Eon-17 SLX laptop that has recently gone out of warranty. I'm getting very frequent BSODs on start up, and it seems to happen almost every time if I have something connected to the HDMI output. It usually will BSOD, then restart fine.

I've tried a fresh install of 8.1, to no avail.

Please find the logs attached.

Many, many thank yous in advance!

A:BSOD often on start up, especially with HDMI connected

Hi mkbcnr33 & welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Thu Apr 9 03:42:31.874 2015 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\040915-4734-01.dmp]

Windows 8 Kernel Version 9600 MP (8 procs) Free x64

Built by: 9600.17668.amd64fre.winblue_r8.150127-1500

System Uptime: 0 days 11:14:33.575

Probably caused by : ntkrnlmp.exe ( nt!KiFastFailDispatch+d0 )

BugCheck 139, {3, ffffd000248f7500, ffffd000248f7458, 0}
BugCheck Info: KERNEL_SECURITY_CHECK_FAILURE (139)

Arguments:
Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
Arg2: ffffd000248f7500, Address of the trap frame for the exception that caused the bugcheck
Arg3: ffffd000248f7458, Address of the exception record for the exception that caused the bugcheck
Arg4: 0000000000000000, Reserved
BUGCHECK_STR: 0x139

DEFAULT_BUCKET_ID: LIST_ENTRY_CORRUPT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x139_3_nt!KiFastFailDispatch

CPUID: "Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz"

MaxSpeed: 2700

CurrentSpeed: 2694

BIOS Version 4.6.5

BIOS Release Date 02/14/2014

Manufacturer Notebook

Product Name P17SM-A

?????????????????????????????????????????????????????????????????????... Read more

3 more replies
Answer Match 52.08%

Today my notebook Asus M50Vn suddenly started to behave weird. While it's connected to plasma via HDMI, everything starts to stutter a bit, which is very inconvenient in videos. It works like this: 0,5 s of fluid picture, 0,1 s of freeze, 0,5 s of fluid picture, and so on.

Situation is the same on primary (built-in) monitor and secondary (plasma), as well as on youtube, VLC, PotPlayer and MPC HC. DXVA and CUDA won't make any difference, choosing different video renders in player's settings won't do the help as well. I've already tried to install older and newer drivers (graphics is Geforce 9650m GT) but it didn't help.

Computer is 100 % virus free, there is COMODO IS for on-access security and I've also checked it with malwarebytes, hitman pro, emsisoft emergency kit, kaspersky tdss killer and CCE. Almost all processes are disabled.

It's interesting because there's no problems when plasma is connected via VGA.

Unfortunately there's no useful system restore points.

Does anybody have any idea what could be wrong? Thanks in advance.
 

More replies
Answer Match 52.08%

Hey guys,
I updated my windows 7 acer to windows 10 while i was connected to my tv screen via hdmi... but now my screen doesnt show up on my laptop at all. It only shows up once i connect my laptop to my tv via hdmi... so i cant actually use my laptop without my tv screen which is difficult while trying to study... i am desperate to get this fixed... if anyone has any ideas please let me know

More replies
Answer Match 52.08%

I have an Elitebook 8530p that I am trying to connect to my TV so I can view online TV on my TV screen. I can stream the online TV and watch it on the laptop ok, and I can connect the laptop to the TV with HDMI cord and I see the picture on the TV too, but as soon as I push the play button and it starts to stream the Laptop freezes. This happens on both TV's in our house with different HDMI cords which leads me to believe it is an issue with the laptop (not the TV's or cords). I have tried pushing the Fn + F4 buttons to clone it but that makes no difference. I have tried changing the display settings but I don't really know what I am doing! Another post said to choose full HDMI setting but even though the laptop has a HMDI port it didn't appear to have that setting. Is it too old?
 

A:Laptop freezes when connected to TV through HDMI

The problem is most likely the video card driver, so yes technically your laptop is too old, but luckily you can save that geezer! If updating the drivers doesn't work then you can try changing resolutions.

Solution found here:
http://answers.microsoft.com/en-us/...o/7fafd27d-816f-456c-afa6-3c7fec3909e3?auth=1
a. Click Start, and then click Control Panel.

b. Click System and Maintenance, click System, and then click Device Manager.
Note If Control Panel is in Classic View, double-click System, and then click Device Manager.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.

c. In Device Manager, expand Display Adapters, right-click the display devices, and then click properties and under the driver tab click on Uninstall.

d. When you are prompted to confirm that you want to remove the device, click OK.

e. Restart the computer.

After the computer restarts, the drivers will be automatically installed. Check after this procedure. Also check if you have any exclamation mark or cross marks alongside the display devices listed in device manager.
You can update the drivers using windows update. Refer to the below mentioned link and use the steps provided accordingly -http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly

You may also check if there are any updates for the drivers at the manufacturer website. You may even install the latest drivers from the manufacturer... Read more

3 more replies
Answer Match 52.08%

Hi I have a strange problem with my b540p Ideacentre. If istart the computer without an hdmi cable connected, the screen just doesn't start, it never turns on. However, if I turn of the computer, plug in an hdmi cable in the out port, and start it works (regardless of wether or not the hhdmi cable is connected to anything. What is the deal with this, and how do I fix it?

A:B540p Only starts if HDMI is connected

I have the same problem.  I was connect to LG tv from hdmi out and now I can't turn on my computer without disconnect hdmi. I've tried set from screen resolution and set to 'show desktop only on 2' and when i disconnect and restart then there is blank screen, but when i connect hdmi then it work.  Please help.

3 more replies
Answer Match 52.08%

I have Windows 98 and have onboard sound. ie a VIA AC97 chip. The problem is that the sound in some games is choppy and stuttering(Half Life works, Phantom Menace-Stutter!).
I have tried various drivers to no avail.
According to Device manager and System Info there are no conflicts (though I know they lie sometimes).
Any advice..? Apart from buying a real soundcard...
Thanks
 

A:Stuttering Sound!

7 more replies
Answer Match 52.08%

Hi there!

Im at my wits end with my sound problem on my new pc. Having just bought the new pc, i have found that performing any other task while listening to music causes the music to irregularily stutter or skip, like a scratch on a cd

It happens when using i.m. or a web browser, even when typing (in fact most frequently when typing)

I have tried upgrading both the audio drivers and video drivers. I use a memory optimiser program, and so i know that the free ram is almost never below 60%, so im farely certain RAM isnt the problem. The problem occurs on everything, from itunes and windows media player, to the audio from youtube videos.

Please help me solve my problem as its driving me crazy

Thanks in advance
SuperStrongBad
 

A:Sound Keeps Stuttering

9 more replies
Answer Match 52.08%

New user to windows 7! Everythign runs and works great minus the sound!!! It stutters and echoes very badly every so often. And being an avid player of Conan i use Vent. Vent does not even work. Any help provided is greatly appreciated!

A:Stuttering Sound

Have you been to the Dell website and downloaded the latest drivers?

8 more replies
Answer Match 52.08%

WHEN PLAYING SOUNDS IN WINDOWS XP SOUND STUTTERS. NO PROBLEM PLAYING CDS BUT STUTTERS WITH MP3, WAV ETC. LATEST SOUNDCARD, GRAPHICS AND MOTHERBOARD DRIVERS LOADED. CHANGING SOUNDCARD DOESNT STOP THE PROBLEM.

SYSTEM SETUP:

WINDOWS XP HOME
ATHLON 1.0 THUNDERBIRD CPU
ABIT KT7-RIAD MOTHERBOARD (RAID FACILITY NOT IN USE)
NVIDIA GEFORCE 3TI 200 GRAPHICS CARD
VIDIOLOGIC SONICFURY SOUNDCARD
IBM HARDRIVE 30GIG
384 MBRAM
DIRECTX 8.1

?ANY IDEAS?
 

A:Sound Stuttering

Welcome to TSG!

Try this:

Go into control panel
"Sounds and Audio Devices"
reduce the sample rate for the audio and see if that helps!
 

1 more replies
Answer Match 52.08%

hi all.

when using media player the sound keeps stuttering towards the end of each track.

can anybody help? i have no idea why this keeps happening.

More replies
Answer Match 52.08%

It seems like this problem has been famous since 2007...

So I just bought a new laptop, HP Pavillion nv9925nr. Specs are AMD Turion64 x2. ram is at 4gigs ddr2 667mhz. Nvidia Geforice 7150m and a Conexant High Definition Audio card (all this is onboard... dur)

Anyway, my problem is that every minute or so the sound stutters, all my drivers are updated, got all the windows update thrown in there, and it still does the stutter thing every minute or so. Is there any solution to this problem to save my sanity? Thanks : D

A:Sound Stuttering

Hi TemperFire, welcome to the vista forums

No cure yet as far as I am Aware of...
Just the normal workaround

Right click the speaker icon in the tray select Playback Devices select your default output and on the enhancements tab Disable all enhancements.

Hopefully that should do the trick but if not try disabling all enhancements in the playback application (media player)

hope this helps

3 more replies
Answer Match 52.08%

Hey,

I have the sound stutter problem when playing music, video and games. It is sometimes incorrectly referred to as a problem with windows media player. Any sound for me stutters every few seconds, sometimes its gone for a few hours and comes back. I have realtek drivers, the latest, and have tried old ones. Ive tried turning off exclusive mode and many other common tricks like changing quality etc.

Obviously I am looking for a fix but im afriad if i ask I will get nothing but all the home remedies that work for a while, or people think it works but the sound problem comes back. If someone had this problem and eliminated it I would love to hear how its done. However, I would like to also know the reason for the problem, does anyone know whats causing it? Maybe moderators or forum members that have seen this problem floating around. This is mainly to avoid the "Maybe your holding your phone to close" type responses from people who have not seen the problem before, that being said, any ideas are nice. This is obviously a windows 7 problem, maybe there is no good realtek drivers out yet, although i hear similar complaints about creative on w7 forums. does w7 handle sound differently. I'm afraid that this is actually a fundemental flaw in the operating system. Does anyone here have windows 7 rtm 64 bit with working sound??? If so do you have any unique sound settings/caching/memory settings?

A:does anyone actually have the Sound Stuttering fix?

Please, do not provide detailed system specs. They will not help at all. OK, go ahead and provide detailed system specs.

The problem with your assessment of a serious flaw in Windows 7 - not all users report or experience the same problem. There are some issues with RealTek though. All of which can be addressed.

Could also turn out to be an I/O issue or even CPU spiking. Can't begin the analysis until we have...

In your case, a detailed model number or service tag will work.

9 more replies
Answer Match 52.08%

Hi folks,

Really hope someone can help me with this problem as it's driving me crazy.

The sound from my card is stuttering badly when I'm playing games etc. It appears to stutter badly when say FMV is playing or similair.

Here's my specs:

PIII 866
256Mb Ram PC133
SBlaster 128 PCI
32Mb PCI Riva TNT2 Graphics Card
50x CDROM
Win 2000
20Gb HD 5400rpm

I've eliminated the CDROM as the source of the problem, as when solely reading from the HD the problem still occurs.

Could the problem be being caused by the HD? Do I need a faster one?

Any help to solve this problem would be most appreciated.

Many Thanks,

Peaker.
 

A:Stuttering Sound

8 more replies
Answer Match 52.08%

about a month ago what at first I thought alone was my CD player.. any CD or DVD I played the sound seemed to stutter..the DVD visually were fine but sound was bad. but If I play anything from my windows media player its all fine or listening to any music online is fine too...until the other day I put in a cd full of pix and the music I was listening to online started to stutter. also windows media will not let me burn any CDs and was then burning cd's with roxio now that doesnt work or just takes for ever...is this all connected?? please help ..at my wits end and do not have the time or money to take my pc in..
 

A:stuttering sound

It sounds like you have too much running it the background and it is choking the system while you are multi-tasking. It is normal to get a hiccup in sound while reading a CD as the ATAPI interrupt halts the entire system temporarily, but not like you are describing. You can resolve your issues through two means:

a) Uninstall unnecessary and superfluous software that you don't use or arn't really required for proper operation, check the bottom right hand corner and see how many programs you have running in the tray, if there are lots then you should do some cleansing. To uninstall in Windows XP go to Start, click on Control Panel, now click on "Add / Remove Programs". To uninstall in Windows Vista go to Start, click on Control Panel, now click on "Programs and Features".

b) You could disable some software from starting up with Windows instead of getting rid of it completely by going to Start, clicking on Run (or holding down the Windows Key on the keyboard and pressing R) and typing "msconfig" without the ". On the second to last tab labled "Startup" you can untick the entries to stop them from starting with Windows, make sure you don't disable anything critical though!

c) Reinstall Windows with a fresh copy and rid yourself of the OEM c*ap that comes with most PCs.

Hopefully you should be able to get the amount of background processes down by removing unneeded software, you can check how many processes are runnin... Read more

3 more replies
Answer Match 52.08%

Hi,

Recently, the sound on my computer started stuttering, and sounding all scratchy. Everything stutters, except midi files, which don't play at all. I'm using an integrated sound card, on an Intel D865GBF motherboard.

Thanks for any help!
 

A:Stuttering Sound

16 more replies
Answer Match 52.08%

Hi,

Lately I've been having issues with my sound for my PC. When I watch videos, listen to music, or play games the sound seems to keep stuttering at times. I just switched to another sound card instead of the built-in MB sound card but the problem still persists. Any help would be appreciated. Thanks!!

My PC Specs are as follows:

Intel i7-4770K Haswell
ASUS Maximus Hero VI Hero
G.Skill RipJaw 8GB Ram
Gigabyte GEForce GTX 770 4GB 256-Bit
Windows 10

More replies
Answer Match 51.24%

Hi all,
Toshiba Satellite U400-157
Windows Vista Home Premium Intel Core(TM)Duo CPU [email protected]; RAM 4.00GB
Display Adapter: Mobile Intel(R) 4 series Express Chipset Family
Stage 1
Laptop connected to Panasonic LCD 42" with HDMI cable
Both LCD screen and laptop monitor diplay correctly
Able to change display settings and control cursor at laptop
Everything is working fine

Stage 2 two weeks later
When HDMI cable is connected, Laptop screen goes black, but the LCD screen works fine and the cursor appears on the LCD and can be controlled by the laptop

Stage 3 two (more) weeks later
When HDMI cable is connected, Laptop screen goes black, LCD screen is blank, no cursor visible
I right click laptop screen, go to Graphic Properties>Display settings and try and change the Operating Mode: from Single display to Two
Primary Device: LCD
But these choices are not available.
I go to Control Panel> Personalization> Display Settings
Drop-down menu shows
1. Generic PnPMonitor on Mobile Intel(R) 4 series Express Chipset Family
Select down arrow
2. (Default Monitor) on Mobile Intel(R) 4 series Express Chipset Family appears

Connected HDMI cable and try again
I have two Black Screens ...!
Have tried restarting comp then TV, and vice versa, before and after connecting HDMI cable, but nothing works.
(all other independent operations on the laptop and the TV work perfectly well)

Yelp, help, please ...
TIA
Mukund
PS I did not post correctly, so I ... Read more

A:Black screen when laptop connected to TV via HDMI

Hello, Do you have another HDMI cable to try , if not, do you have a VGA cable to use ?

26 more replies
Answer Match 51.24%

Thanks for the update today Dell!
Been using my XPS 13 (9350) on 40" 4K monitor on TB15 dock and HDMI for a while at 30 Hz. Today, installed the updated video driver (2016-09-07) and got 50 Hz working with Plugable adapter! So, no need for the TB15 until it can also support 50 Hz or better
My setup:
Dell XPS 13 (9350) with latest drivers
PLUGABLE USB 3.1 TYPE-C TO HDMI 2.0 ADAPTER
Panasonic TX-40CX300E 40" 4K Ultra HD
= Jari =

More replies
Answer Match 51.24%

I fought this problem all day and I think I have it narrowed down. System is Lenovo Yoga 900 i7 with Windows 10 with all latest updates. Application is Citrix Receiver 4.5. When using Quickbooks with the Citrix Receiver, mouse clicks are disabled/not recognized.  All keyboard inputs still work, the mouse arrow tracks correctly, but mouse clicks seem to be ignored.  This behavior occurs when booting to dual monitor setup with HDMI adapter in the USB Type-C port; booting to single monitor (Yoga), then plugging the HDMIR adapter in the USB Type-C port.  The only resolution is to boot to single monitor (Yoga) and work in single monitor mode exclusively.  I am using the USB Type-C to HDMI adaptor purchased from Lenovo.  This occurs with the Yoga trackpad AND occurs with my USB wireless mouse. Also note with native Windows applications, the mouse works fine with both  monitors connected and active. I really bought the HDMI adaptor to use two monitor with the Citrix Receiver.  I have tried to Google this problem, but I'm unable to find a Citrix Receiver support site/forum that would be appropriate for this question. Any advice appreciated.

More replies
Answer Match 51.24%

Recently my hard drive went out and I had it replaced with a solid state drive. The problem I'm having now is when I hook up my Samsung Smart TV through an HDMI cable (also tried a new cable with same results) I get wavy, scrolling lines on my laptop that go away when I disconnect the cable. The lines don't show up on my TV and this didn't happen before having my computer repaired.

The Staples tech wants to charge me again for diagnosing it after paying over $270 for a diagnostics and replacement of the hard drive. He said it's not possible for it to be a problem with the new hard drive so it would be another charge even though it didn't do it before having it repaired and my computer reformatted. I'm concerned I'm going to burn something out if I keep using it this way but I also don't want to pay more if it's something simple. He said it could be the motherboard or graphics card but I'm not sure whether or not to trust him. I'm a senior with little technical knowledge.

I want to use an HDMI cable so I can watch Xfinity programming that's available online only. I can live with it doing this as long as it isn't hurting my computer. Any help or suggestions is greatly appreciated.

MSI Laptop - 3 years old
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 2
RAM: 3886 Mb
Graphics Card: Int... Read more

A:Scrolling lines on laptop when connected to TV through HDMI

6 more replies
Answer Match 51.24%

I connected the G50 to monitor and it not output any display.  VGA works fine but nothing from the hdmi.

A:G50 will not output video to hdmi connected monito...

Hi A1ci,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing issue with system not able to connect to external monitor through HDMI on your IdeaPad G50.
 

Have you checked with different HDMI cable?
Are you connecting to External monitor or a Televisition?
Please check if the Graphic driver is updated? If not please download the file from the support site and install it.

http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g50-30-noteboo...
 
Hope this helps.
 
Best regards,
Hemanth Kumar




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Answer Match 51.24%

Hello, I am weighing up my options between purchasing an Ideapad 500s or a Thinkpad L460. I do a bit of video editing, and when I'm doing that kind of work I want to hook the laptop up to a 4k screen, (the extra pixels allow a much more efficient workflow). To connect to a 4k monitor at 60Hz I have read that I need a DisplayPort output (which I note that the 500s does not have), or an HDMI 2.0. I suspect that the Ideapad 500s does not have an HDMI 2.0 output, but I would be happy to be contradicted. Could someone please confirm this one way or ther other? Preferably if you could point me to some official documentation about the product which answers the question that would be great! If it does have an HDMI 2.0, I wonder if anyone has any idea how the nVidia chip would handle the 4k screen. I wouldn't be gaming or even doing and 3d modelling or rendering - just some HD video editing - so I expect it would be fine? Many thanks,Tom

More replies
Answer Match 51.24%

I have a Toshiba satellite L305-S5875 I have it connected to my Vizio HDMI HDTV to watch netflix with. It has been working fine except for the past week. When I unplug the laptop to skype and then plug it back into the tv when I am done I get a, "NO RGB signal" message from the tv. I don't know why it is doing this, I have been able to use system restore to get it working again, but it is no longer working. Any ideas?
 

A:laptop connected to HDMI tv was working now keep getting no RGB signal

Try this:

Hold down the input button on the right side of the Tv. This is the bottom button
With the tv off, press and hold the bottom button (input)

When the TV powers up and you see the input menu, release and press the button
to change the mode to your preference.

Hope that helps.
 

1 more replies
Answer Match 51.24%

Hi, new here. After searching for information on my problem I could not find a single thread with the same issue.
Having said that, here goes.

I just bought a new TV and attempted to connect it to my laptop via HDMI. I have used both the laptop and the cable with other TV's in the past with no problem but when I connect the two the laptop powers off as if the power has been cut. It will not boot when the two are connected and only happens when the TV is on. The laptop will boot into safe mode but it seems that HDMI out is disabled in safe mode so I cannot test it. I have checked and my graphics drivers are current. Hope someone can help! Thanks.

More Information: I have since exchanged for a different TV (Different Brand) for an unrelated issue and it doesn't work with this one either, same issue.

A:Laptop Shuts Down When HDMI Connected To Television

I found this article on the Forum not sure if it will be any help

Computer shuts down while TV is connected through HDMI

9 more replies
Answer Match 51.24%

Hi there;

I recently got a lenovo z710 ideapad to replace my previous laptop and serve as a substantial increase in gaming potential. I usually game with my computer connected to an lcd tv with an hdmi cord. However, with the new laptop I am having incredibly constant BSOD issues.

The BSOD has specifically occurred in Bioshock: Infinite and Deus Ex: HR (I have not yet tested any other games significantly). I am normally able to play fine for some time, however after gaming for a variable amount of time my computer blue screens after trying to load a new map or level (either by fast travelling, moving from one map to another, or just from loading a savegame).

In the case of Deus Ex, I can quickly and reliably produce the error, if I run the game and load a save, then quit to desktop and repeat, the BSOD will occur within 2-3 cycles. There was no problem when running the game while not connected to my tv, even after 10 or so cycles.

So far, I've tried the following based on what I could find on the net:
-Verified integrity of the affected games
-re-download affected games
-search error codes on Microsoft's website (no luck)
-Used the Windows ErrorChecking tool to check for hard disk errors
-Complete un-installation of NVidia drivers and safe-mode wipe using Display-Driver-Uninstaller tool

Nothing seems to have any affect. I think (hope) it's a software issue, as the computer did originally come with Windows 8, which I removed and replaced with the Windows 7 ... Read more

A:BSOD while gaming on tv connected via hdmi; nvlddmkm.sys

From the sounds of it, you have a problem with your graphics card, and because it's a laptop it sounds like an overheating issue. You have a bugcheck of 0x116 which is a video tdr error which is generally caused by a faulty graphics card. Download Speccy to monitor your temperatures. Then post a screenshot here.

Speccy - System Information - Free Download

Then can you please run a stress test with furmark by following these instructions.

Video Card - Stress Test with Furmark


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa800ec49010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff8800637e694, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.

Code:
fffff880`079eca48 fffff880`044bb140 : 00000000`00000116 fffffa80`0ec49010 fffff880`0637e694 ffffffff`c000009a : nt!KeBugCheckEx
fffff880`079eca50 f... Read more

9 more replies
Answer Match 51.24%

I have connected my XPS L502X laptop to my Samsung lcd tv using an hdmi cable.
I do not have clone display as an option. I can only extend the display. My guess is that this has to do with the tv display being run from the nvidia graphics card and the laptop display being run from the integrated graphics. 
I am running Processor    Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 2001 Mhz, 4 Core(s), 8 Logical Processor(s)OS Name    Microsoft Windows 7 Home PremiumInstalled Physical Memory (RAM)    6.00 GB
I have updated to the latest bios and the latest drivers for the integrated and the nvidia graphics.
Is there anything I can do to see the same display on my laptop and my tv?
Thanks in advance for any help.

A:How do I clone display on XPS L502X - connected to TV by HDMI

Geekeleh
I certainly suggest making sure that you have the most up to date video driver.  The latest Dell drivers may be found from the following link.
http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=XPS_L502X&os=W764&osl=en&catid=&impid=
You may want to creat an Optimus profile for your applications to ensure that the NVIDIA GPU is being used over the integrated Intel solution.
To create a new profile for an application:

1. Open the NVIDIA Control Panel.
2. Select Manage 3D Settings.
3. Select Program Settings tab
4. Click Add button.
5. Browse to and select the application executable that needs the new profile.
6. Or choose the preferred application from the drop menu.
7. Select the features and settings you wish to change for this application.

Don't forget the basics, try another display if possible and see if the problem continues.  Try another HDMI cable to make sure that the cable is alright. \
Please, let me know what you find out.
 
TB 

33 more replies
Answer Match 51.24%

Hey guys. I have connected my PC to my HDTV (Sansui), and I cannot find an option in the TV for 1:1 Pixel Mapping. I need this because my TV is overscanning my laptops display and the taskbar and other images are cut off the screen. It is also quite blurry. I have the TV's manual here:

http://www.sansuiproducts.com/images/manuals/SLED2280D.pdf

I could not find an option in the manual, but maybe you guys could.

Many thanks.
 

A:Need help with my laptop connected to my HDTV (HDMI Cable)

6 more replies
Answer Match 51.24%

Been trying to figure out a problem with HDMI audio out and "not plugged in error"

HW is a motherboard with HD3200 and ALC889A HD with latest drivers.

Using a HDMI cable i get HDMI audio out, but if i switch inputs on the receiver then back HDMI audio is "not plugged in".

changing resolution brings it back as default device.

Tested a backed up vista image with ati 9.04 and realtek hdmi 2.23 drivers and it worked fine changing inputs on the receiver.

The same drivers in win7 did not resolve the issue, so im guessing theres something in win 7 that causes this

A:win7 bug with HDMI audio connected to receiver

if you have an HDMI capable receiver I am going to assume you have at least a 5.1 setup correct? And I am also going to assume that "HW is a motherboard with HD3200" means onbaord HD3200?

If yes then I would suggest using either the coaxial output or optical S/PDIF output to the receiver as you are not reciveing 8 channel LPCM through HDMI.

As to your actual problem I am setup same as you, however I am not having that problem... is video still able to pass through to your TV even in the audio not plugged in state?

7 more replies
Answer Match 51.24%

I've had my laptop for a while, and I've used my TV Screen as a secondary monitor a lot. A while ago my computer updated to windows 8.1 when I fell asleep on it and accidentally hit the update button when it came up (oops), making me have to use windows 8.1 now. Now I haven't had many problems with it, it works fine and dandy, but I do have a major problem when I try to use my second monitor. When I run a game or movie on it, the audio comes out from the laptop speakers, not the TV speakers. Previously, using windows 8, it would let me use both.

I know that if you go into the control panel and the sound systems that it should show two speakers, but for me it isn't. I've tried lots of different things and browsed the web for an answer, but I can't find anything.
Screenshot of my playback devices window:

If anyone knows how to get this to work, it'd be a big help!

A:HDMI connected second momitor not playing audio

According to your screen shot, you only have the PC audio (RealTek) and no HDMI audio. Reinstall the drivers for your video and see if that restores the HDMI audio.

No PC info posted, please fill in the "My System Specs". Helps us to try and help you.

I have both HDMI and PC audio on my Win 8.1 machines so it should work for you, if the PC is fully compatible.

1 more replies
Answer Match 51.24%

I messed up display settings for when I attach a TV via HDMI to my laptop. I set the system to display only on the TV (OK, not a totally stupid idea) and then picked a resolution the TV doesn't support (that was TOTALLY stupid!) When I disconnect the TV, laptop display works as normal. As soon as I connect the TV, laptop screen blanks and TV goes to Invalid Format. I have tried to change display settings through the control panel with the TV disconnected, but as soon as I plug in the TV, it goes back to the bad resolution on the TV and no laptop display.

Is this stored in the registry somewhere? I want to reset the flag telling the system to display only on 2nd display.

Please help

A:Invalid Format when laptop connected to HDMI TV

Hi OldWraith, welcome to the Seven Forums.

This should work:Connect the TV, don't mind the Invalid Format warning
Press WIN + P to open Display Switch dialog. You don't see it as it's on the non-working TV display but trust me, it's there:
(Screenshot from our tutorial Display - Change Main Display)
Press Right Arrow > Press Enter to change from Display 2 only to Display 1 only
Now you should have the desktop on laptop's display, you can change your display settings as you wish
Kari

1 more replies
Answer Match 51.24%

I have a brand new MSI Media Live box. The Installation process went fine except when it came to startup after installation. I always receive a blue screen and sometime I have the "irql_not_less_or_equal" message. The system works perfectly when I startup using the VGA connector. I have verified that HDMI does work if I startup using the VGA connector and then extend the desktop.

I have downloaded and install the Windows 7 driver from Nvidia. My card is Geforce 6150. The error descriped above happened using my Philips Tv and also my computer LCD screen.

Any Ideas?

A:Blue screen if startup with HDMI connected

If I remove the HDMI cable from the computer while it is starting up and plug it in again when the login screen has appeared then this works without problems. Also works when starting up from hibernation.

9 more replies
Answer Match 51.24%

My headphone jack is busted, so I bought an HDMI to 3.5mm adapter so I could use my headphones that way. However, I can't get the laptop to send audio over HDMI because it doesn't think there's any device to receive that audio. How can I get Windows to route audio that way anyway? Everything I find is the opposite problem, where someone has a device plugged in and recognized but can't send audio to it.
OS: Windows 7
Model: Dell Inspiron 15r Special Edition
Processor: Intel Core i7-3612QM CPU @ 2.10GHz 2.10GHz
Graphics card: AMD Radeon HD 7730M
Adapter: click here

More replies
Answer Match 51.24%

I know this is one that has been floating around the forums for a while but I have not been able to find anything that works in my situation. When I connect my laptop to my TV (Panasonic Viera Plasma) via an HDMI cable, I can get the video to show on the TV fine but there is no audio on the TV; it comes out of the laptop. I have tried everything I can think of including deleting the drivers then reinstalling them, updating them, rolling them back, etc., etc., etc. Here are the specs on my laptop:HP ENVY dv7 Notebook PCWindows 8.1 64-bit, 8GB RAMIntel(R) Core(TM) i5-3230M CPU @ 2.60GHzIntel(R) HD Graphics 4000Intel(R) Display Audio (with Beats Audio)IDT High Definition Audio CODEC Also, here is a snapshot of the Playback Devices:  As you can see, I have nothing which says "HDMI". I have gotten quite frustrated with not being able to get this to work. I would appreciate any help I can get. Thank you. Alex...

A:HP Envy dv7 - No Audio When Connected to TV by HDMI Cable; W...

Can someone please help...?

9 more replies
Answer Match 51.24%

Hey guys, I'm actually new here, so I am not sure if this is in the right forum page, but I need help. I have had a problem with my HDTV and laptop for a few months and finally decided to start a thread for help. The problem is that the HDTV is blurry and fuzzy when connected to my laptop via HDMI. However, I realize this is an overscanning issue, because in the AMD Catalyst Control Center, whenever I set the scaling for overscanning to 0%, the fuzzy text and screen is fixed, but the edges around the screen like the taskbar are cutoff the edge of the screen. I do not think my TV has an option for "Just Scan", but maybe you guys can find something I can't. Here is the manual:

http://www.sansuiproducts.com/images.../SLED2280D.pdf

Also, I am running Windows 8.1 with an AMD Radeon HD 7520G graphics card.

Any help is appreciated, thanks.

A:Need help with my laptop connected to my HDTV (HDMI Cable)

Not sure I can help but I have the same thing. I have a cheap TV and I think it has more to do with that. I play videos is all and not an issue there, just desktop is expanded past screen.

My TV is only 720p.

I'd love to see if someone has a fix.

5 more replies
Answer Match 51.24%

I recently found out that every time i plug in a HDMI or Auxiliary cable, my computer crash. I tried changing the cable to see if that was the problem and it wasn't. I just don't know where to look to start fixing the problem. I've considered that maybe the connector is faulty, but i'm looking for option before going to that.

I use HDMI to connect my TV for movies
I use the auxiliary Cable to connect a speaker.
on different occasion.

A:Computer crashes after HDMI/Aux cable is connected

Did you try shutting the computer down, plugging in the cable then starting back up? I've crashed a computer when plugging in a USB Thumb/Flash drive, turned out it was caused by static electricity that I'd built up walking across a carpeted room, now have anti-static touch pads on my desks to touch before anything else.

3 more replies
Answer Match 51.24%

System has two HDMI ports and one DVI. The DVI supports a monitor and HDMI is advertised as supporting two monitors. Neither of the HDMI ports are working. Contacted HP support and was told to return for warranty work (1 day old tower). Returned to store for replacement contacted HP support with second tower and was told same, return for warranty work. Contacted online support from another company went through several operations, drivers different connections, both monitor and TV and finally was told tower #2 was also defective. HP Envy 750-197c windows 10

A:Dual monitors not working when connected to HDMI

Hello @77-77-77,I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.If you are unfamiliar with how the Forum's private message capability works,this post has instructions. Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great weekend!

1 more replies
Answer Match 51.24%

Hello
 
I am facing some issues, when connecting my Dell E6440 laptop to my LG 55LB650V flat screen.
 
I connect the laptop to the TV via HDMI-cable and I have been trying different cables. The computer has both an Intel HD Graphics 4600 and an AMD Radeon HD 8690M graphic card.
 
When I connect my computer to the TV the screen starts flashing black, every 5 seconds or so. Every time I open a new program the screen flashes and it is also happening sometimes when I do not use the computer.
 
The computer runs at 1600x900 and the TV is a full HD. I have tried to alter the resolution to both and I also tried to use a custom scaling level of 120 % (as 1920 is 120 % of 1600). I have also changed the refresh rate to 59p HZ and 60p HZ, but that made no difference. I have found out that if using the 60i HZ the screen would not flash (at least it have not yet).
 
So at the moment I can use the computer on the TV, but of course I would like to know why the screen is flashing when using 59p or 60p HZ and know what I can do, so I could use these refresh rates.
 
I hope that someone could make me wiser on this problem and maybe give me a solution. If anyone knows, I would also be happy to know what the best custom scaling level to use when using a 1600x900 laptop on a full HD TV is.
 
I really appreciate any help. Thank you in advance!
 
I have recorded two videos that shows the problem:
Part 1: https://youtu.be/DzKU0a0qiqo
Part 2: https://youtu.be/r... Read more

A:Dell E6440 flashing when connected to TV via HDMI

Can anyone please help?

2 more replies
Answer Match 51.24%

Hello, I built my new computer about a week ago and was running it off a single 19" Tevion TV while I waited for the HDMI cables to arrive so I could setup my second monitor.

They arrived yesterday and when I plugged in my 32" JVC LT-32DA30J there was overscanning and the bluriness. I fixed the overscanning in the TV's menu and now the size is correct but even at native resolution, the JVC monitor is still quite blurry and is a strain to look at and concentrate on.

Plugging the HDMI cable into my Tevion monitor made that go blurry as well so it could be the HDMI cable or the motherboard ports (when I first got the PC, the VGA port had the same problem but once updated it looked normal)

Does anyone know of a fix to this ? Or can at least suggest what part is going wrong so I can try and fix it ?

What I have tried:
Changing the resolution - all the different resolutions all show the same blurriness
Changing the refresh rate - problem persists through all refresh rates
Changing monitor settings - As above, changing these settings didn't help with anything

Any help is very appreciated , I've been trying to fix this problem for most of yesterday

A:HDMI connected monitor is blurry and seems out of focus

you dont seem to have changed the 2 most important things!!

1) update the display/gpu drivers.
2) change the hdmi cable.

if neither results in it working then report back!

9 more replies
Answer Match 51.24%

Hi! I have this monitor http://www.newegg.com/Product/Product.aspx?Item=N82E16824014146

and this cable

http://www.newegg.com/Product/Product.aspx?Item=N82E16812226013

Connected to a normal TV and HDMI to DVI cable to my lcd monitor at the same time it gave me an option at startup to switch to my HDMI source, but when I did all I saw was black on the LCD screen.

I was able to go into Display settings and switch it to HDMI manually but when it swaps to my lcd monitor its nothing but black again!

Do HDMI to DVI cables work for PS3s? My lcd monitor does not have a HDMI plug in. Only VGA and DVI

I'm hoping theres a trick to get this working or at the very least an adapter that wouldn't degrade the quality as much.
 

A:Playstation 3 and HDMI to DVI Cable connected to LCD Monitor

oh nvm my monitor dosent support high def outputs =\
 

2 more replies
Answer Match 51.24%

hi, I posted

http://www.techsupportforum.com/f16/...em-417850.html

here originally thinking I had a hardware problem - but a tsf team member brought up that it sounded like malware, so here I am....

since I ran these logs, I uninstalled Adaware, guessing that Adaware plus Kaspersky was the cause of a couple of hangs.


Brief history, this is an HP510 laptop 50G hard drive that we keep in the kitchen, as in my little kid bangs on it, spills a little on it etc. Also it shares a router with the babysitter's computer, whose protection status, where she surfs, etc are probably not as careful as mine. Otherwise

Hp510 laptop
WinXP Pro SP 3
Kaspersky, WinPatrol, (for a few hours yesterday Adaware now uninstalled )
rarely used in questionable places like a hotel room, Starbucks, otherwise I surf through a router using a limited account 99+% of the time.

For weeks, Kaspersky updates had been incredibly slow. Also for quite a while , not sure which started first, the laptop has been ...s.l.o.w... - for example sometimes I'll type in a website name and none of the characters will show for a good 15 seconds, then they'll all or some of them show up at once..

a few days back Kaspersky couldn't open, I downloaded a new version of Kaspersky - now has Kaspersky 2010 - on a different computer then installed it to this one off a USB drive (ie, no surfing during the time of no Kaspersky), then at restart it ran chkdsk -- found a couple of bad sectors.

not a lot... Read more

A:slow and stuttering sound

what Adaware said...

17 more replies
Answer Match 51.24%

Hi,

When my system starts up the start-up sound has gone & the first time the next system sound is generated [i.e. a click when you start exporer] this repeats continuously..... like a dripping tap.

Naturally this is very annoying and inhibits the playing of all audio/video.

My hardware configuration hasn't changed in a year and everything is [was] working fine.

When I reinstall - it works fine. It looks like it's something that's come off the net, after the third/fourth re-start [i.e. system restarts after installing software after reinstall] it appears yet again.

I connect through a cable modem and have anti-virus/firewall software. I don't have a router at the minute - but didn't experience this problem when I did.

Has anyone experienced this before? Is it a windows error/virus? And..... most importantly of all.... how do I fix it?

Many Thanks,

- Rog
 

A:Sound stuttering in Win2000

6 more replies
Answer Match 51.24%

Just very recently watching videos such as the weather forecast etc. the pictures and sound are hopelessly out of sync. How do I correct this please?

Thanks

Rob

A:Stuttering sound and picture

Hello Rob.

Try updating your sound card driver and your video card driver by doing a quick google search with your computers make and model.

example: "google search > "HP Pavilion g6 drivers"

8 more replies
Answer Match 51.24%

Hey all,

As of yesterday the sound on my PC started "stuttering." It's the same stuttering that happened before if i was listening to music and opening a huge pdf (for example) or something of that nature. Now it's doing it all the time. I even notice it sometimes on the Windows startup sound.

Here are my computer specs:
Dell Dimension DIM3000
P4 2.8Ghz
768 MB Ram
SoundMax Audio Driver

It does it in bothe WMP and WinAmp
 

A:Solved: Sound Stuttering

9 more replies
Answer Match 51.24%

Hi

I have an ongoing problem when listening to music or watching videos. Everything becomes fragmented and the sound and video will stutter.
On two occasions when listening to music (via windows media player) the stuttering got so bad that the media player froze and i got the blue screen of death and it started to do a physical memory dump.

I have Kaspersky running......and i have also ran Mbam; superantispyware; Tdss killer; dpc latency checker and they found nothing out of the ordinary.
I downloaded Vlc and ran videos via that but they still stuttered.

The problem seems to be getting steadily worse and the rest of the computer seems to be slowing up with programs taking a long time to load or not loading at all.
The browser now frequently will not respond.

Does anyone have any ideas?

My computer is: HP Pavilion dv7 Notebook running windows 7 64bit sp1

A:Stuttering sound and video

Hi there, Welcome to Seven Forums.

In regards to your BSOD please follow the instructions here: http://www.sevenforums.com/crashes-d...tructions.html

Has this problem been happening ever since you bought that laptop? Or has it just started recently?

2 more replies
Answer Match 51.24%

I've recently installed a Gamesurround Hercules Fortissimo 2 sound card to solve my stuttering problem, but it's made no difference. Basically, as i play games the sound will stutter at the same time there is a graphic slowdown, only very brief but annoying.

My system is a fairly high spec (512 DDR, AMD XP 2600, Geforce4 Ti4800SE) so i'm thinking that i should not have these kinds of problems. Can someone please help?
 

A:Sound stuttering problem

Have you make sure that you have installed the newest driver? Older driver sometimes tend to be buggy.
 

6 more replies
Answer Match 51.24%

I recently changed my system from a dual cored system and upgraded to the following spec

AMD Phenom 9950 2.6ghz quad core
Asrock Alive Xfire motherboard
Corsair Extreme series SSD 32gb
Windows 7 Pro
ATI Radeon 5770 x2 in CrossfireX
Sony Blu Ray reader
NEC DVDRW
Corsair Hydro series liquid cooling
4 GB DDR2 PC6400
250GB Seagate Baracuda
750w high powered PSU with four 19 amp rails.

It has Windows 7 professional 32 bit system freshly installed on it. But it has a major sound looping and slight video stutter to it.

So i installed an external usb sound card and disabled the onboard sound in the bios to combat the problem. This did not help one bit.

So i try and play a file from my external hard drive instead of playing a youtube video, hopefully to try and see if it was my connection. Again nothing.

Im not really that technologically minded and i know that this system is much better then what i was running before but this sound problem is really driving me mad. I never had this on my previous system.

The only differences i can see between a totally fresh install is that this has a wireless card installed and that it has Microsoft security essentials installed too. Perhaps i need to uninstall these?

Any ideas people as it is driving me mad.

Many thanks in advance.

A:Sound and video stuttering.

When it is stuttering, what kind of RAM usage and processes do you see in Task Manager? What is eating up your CPU cycles and RAM--if anything? You might have something running in the background that you are unaware of, and that should show in the processes tab of Task Manager.

Have you tested your RAM or can you swap in other sticks?

3 more replies
Answer Match 51.24%

Hello guys!

I just built a gaming pc for my girlfriend, the specs are:

AsRock Motherboard
8Go Ram
GTX 560
Intel Core Duo @ 3,00Ghz.

Her computer runs a lot of games on high with no problem, but the game she likes the most: Plants VS Zombies: Garden Warfare, has some problem.

It runs perfectly, with no frame drop or anything and then, all of the sudden, the game would freeze for about a second or two, with the sound looping. After the freeze, the game would resume running perfectly.

This happens a not precise moment, even in the menus. I've tried a lot of thing, but nothing seems to work.

Thank you very much!
 

A:Stuttering, Sound Loop

9 more replies
Answer Match 51.24%

I have been having a problem that has been driving nuts.

Whenever I have hdd activity, My sound card stutters. It happens when I
play a game, listen to mp3's or view video files. All of my IDE drives are set
for DMA.

Here are the particulars of my system:
Asus P4T533-C motherboard
2.8 Ghz P4
1 gig rdram
120Gb Hitachi deskstar hdd
Sound Blaster Audigy Gamer
Geforce 4 4600Ti w/128mb of vidram
Windows XP Home SP2

Any suggestions?
 

A:stuttering sound during hdd activity

Try moving your soundcard to a different slot, also try disabling hyper-threading.
 

1 more replies
Answer Match 51.24%

Hi everyone. So my audio is stuttering every minute or so. It runs fine and then on random intervals it stutters for a second and then carrys on like normal. Its getting a bit annoying, I have only recently done a fresh install and re installed drivers. Only a month ago my RAM was faulty I did a memtest and I sent it back and got replacement. That issue is fine now. Now its just this audio..

So I've disabled all sound devices except the one that works. Closed any THX programs or anything like that. set my speakers to headphones and still no change. It happens with videos and games, everything really. I don't notice a stutter in the video side of things.

Any help would be much appreciated! DXDiag attached.

Specs:
GTX 670
i5 3570k
Asrock z77 Motherboard Extreme - M
Onboard audio Realtek sound
8GB RAM
Windows 7 64 bit
 

More replies
Answer Match 51.24%

Hi,

When my system starts up the start-up sound has gone & the first time the next system sound is generated [i.e. a click when you start exporer] this repeats continuously..... like a dripping tap.

Naturally this is very annoying and inhibits the playing of all audio/video.

My hardware configuration hasn't changed in a year and everything is [was] working fine.

When I reinstall - it works fine. It looks like it's something that's come off the net, after the third/fourth re-start [i.e. system restarts after installing software after reinstall] it appears yet again.

I connect through a cable modem and have anti-virus/firewall software. I don't have a router at the minute - but didn't experience this problem when I did.

Has anyone experienced this before? Is it a windows error/virus? And..... most importantly of all.... how do I fix it?

Many Thanks,

- Rog
 

A:Sound stuttering in Win2000

6 more replies
Answer Match 51.24%

Hi, i just got a new pc and im having sound problems; basically every so often the sound sort of lags out and goes stuttery for about 1 to 5 seconds then resumes as normal. On the performance monitor cpu usage spikes up to 50-60% for the duration.

-Using logitech Z-10 speakers, got the latest drivers, and the problem occurs when im using different speakers also

-Running vistax64 on a pretty high-end pc, so really i shouldnt be running out of resources just to play sound.

-Bought a sound card, hoping to fix the problem, but its the same whether i use onboard sound or the card.

-The problem occurs in all applications, not just WM player

I think the problem is some kind of issue with data transfer and processing within the pc (whether its hard or software based i dont know). It appears to be only sound that displays lag/slowdown symptoms.

I tried sticking some music onto a flash drive and playing it from there, but again it stuttered so im guessing its not a hard drive issue.

Im really running out of ideas, so any help would be vastly appreciated
 

A:Stuttering/Lagging sound

Sounds like a driver issue. What sound card and what on-board audio program are you using? There have been issues with Vista and or 64bit.
 

1 more replies
Answer Match 51.24%

Hi all, Has anyone had an issue with sound stuttering? Listen to the clip below and please let me know if you have a solution. https://youtu.be/oNv9XzgLUgw (opens new window)  I've had this problem for a while now but do not remember it being so bad on Windows 7.  Zach 

More replies
Answer Match 51.24%

MSI KM2M mainboard with on chip Realtek AC97 sound. Running Win98SE.

The sound "stutters" or echos, mainly within games but at other times also. I have all the latest drivers, DX9, etc.
I have another identical system that does NOT have this problem. A comparison between the two gives all the same info, drivers details, IRQ's, DMA, etc... I mean EVERYTHING shows exactly the same and yet this system stutters and the other one doesn't. HELP ! ! !
 

A:[SOLVED] Stuttering sound

16 more replies
Answer Match 51.24%

Hi - I'm new here, but what a great forum.
Heres hoping someone can help........

I have a Toshiba laptop with vista and the sound has finally given up. Its always been a bit clicky, but recently its got to the point where I can't listen to the media centre or use the i-player or youtube etc. It just stutters and seems to run slow. At first I thought it was my internet connection but now the media player does it, I'm thinking its the laptop. Its also doing the stutter when I just click on enter or back.

I have read on google that it may be the drivers for the realtek audio, but when I go to 'update driver' it says windows has detected the most up to date driver is installed.

If I need a new driver where do I get it ? and how do I install it ? I'm a real novice at all this !!

Please help.......

A:Sound stuttering on all applications

Realtek
Download to your computer then go to device manager and update the driver again, but tell it to search your computer, it will ask you where point it to the downloaded file.

10 more replies
Answer Match 51.24%

Two drives, E: & F:. F works fine.

E: stutters continuously when playing an audio CD. There is no problem with data, .MP3 etc, graphics/photos, only with audio CDs.

Device Manager tells me the drivers are up-to-date. Rebooting doesn't help.

Drive is a TSST CDDVDW SH-S223C ATA. Sound is on-board.

[Windows 7 Professional 64-bit, 4GB RAM]

Any ideas?

A:Sound Stuttering on Audio CDs

Do you have another DVD drive you can swap in to see if the issue disappears?

Have you done a system restore to a date before the problem began to see if it disappears?

Any recent software additions or changes in configuration?

DVD drives are commodities now. I don't know how long they can be expected to last, but I understand your reluctance to assume it is a bad drive.

Any chance you were multi-tasking at the time and putting a good load on the processor while playing the CD?

7 more replies
Answer Match 51.24%

Recently, graphics have been stuttering. Sound stutters too, but I'm pretty sure the sound only stutters, clicks, pops and slurs when the graphics are lagging. I cannot pinpoint the source of the problem.
I put thermal paste on my cpu today and brought my temperatures down from 77C to 57C.
Still same problem so doesn't appear to be from overheating.
These problems are across the board from mp3s to video to gaming. Also, it happens on all media players. Sometimes if I load a webpage while music is playing, it'll slowdown the music and make it stutter.

This problem happens even with no other background things running. Directx tests, everything stutters to different extents. Even the small white box in the directdraw test isn't smooth and goes slow, fast, slow fast. In between direct x tests, parts of my taskbar temporarily vanish and then come back, suggesting a lot of cpu power or memory is being used. Is there a good program to test if my installed ram has become faulty?
My system is XP2000+, 768ram, and 9800pro 128mb.

I also noticed that cpu usage goes straight from single digits to 100% when dxdiag starts, and it goes to 100% when quake 3 starts.
 

A:Graphic and sound stuttering

i would think its the 768 ram holding you back.

I would try running memtest once and see what it tells ya.

Also, look in either the registery or msconfig and see if theres anything starting that you don't recognize.
 

1 more replies
Answer Match 51.24%

Some time within the past week, all the audio I play on my HP PC started skipping and stuttering. Sometimes just a split-second pause, sometimes the machine-gun digital stutter. It doesn't matter if it's iTunes or streaming from my browser. I just downloaded and installed the latest driver from Realtek today; it made no difference. Please help! Thanks.

A:Sound skipping/stuttering

Welcome
Maybe Mr Fixit can help
If he cannot, try a system restore. If that works, great. If not, it will give us a lead on the potential causes; since it is not the OS.
Tips for fixing common sound problems
System Restore - How to

57 more replies
Answer Match 51.24%

Hi

My sound stutters and sounds staticy at random for a month now whether I am playing a game, listening to music, or watching a movie on youtube. I have no clue what's causing this but I have noticed that my CPU is always on %50 percent plus or minus 5 and when I check my processes tab system idle process shows 98 to 99 while everything else is at 00. I have run a virus check and a spyware check and both came out clean. My computer is an HP Pavilion dv1000 Special Edition

Specs:
Intel Pentium M 1.73GHz
1GB Ram
Conexant AMC Audio

Please help
 

A:Staticy Stuttering Sound

No help?
 

1 more replies
Answer Match 51.24%

when using media player the sound keeps stuttering towards the end of each track.

can anybody help? i have no idea why this keeps happening.

A:sound keeps stuttering towards the end of each track

i have the same problem.
help!

4 more replies