Tech Problem Aggregator

Software drivers for new monitor (HP 23es) for MAC mini

Q: Software drivers for new monitor (HP 23es) for MAC mini

I just powered this new monitor out of the box. All is working fine, but I want to load the latest driver software into my Mac to get all the flexibiliity available. The HP support website did not have a listing for these drivers and suggested I try the forum for where to find them, assuming they are available. So here I am. Thanks in advance for your help.Dan_the_Man_67

More replies
Answer Match 55.86%

How do I connect two HP 23es Monitors to a Pavilion AMD A8 series desktop?  My second monitor has the following message:  HDMI: INACTIVE,  VGA: INACTIVE  INPUT SIGNAL NOT FOUND, CHECK INPUT SIGNAL NOT FOUND.

More replies
Answer Match 49.56%

I upgraded this little netbook to WIN 10 and it ran really poorly.  Finally gave up and went back to WIN 7. Apparently I need to update the drivers to get my wireless connection to be seen.  HP site only said No drivers available for this PC. HELP!! I don't know what to do or how to get my machine to work the way it used to! 

A:311 Mini PC drivers not available on HP site

Hi: I think you should be able to use the W7 drivers and software from the 311-1100 series notebooks on yours. Looks like the 1100's have the same hardware as the 1000's. Do not use any of the BIOS or firmware files though. http://support.hp.com/us-en/drivers/selfservice/HP-Mini-311-1100-PC-series/4074229

4 more replies
Answer Match 49.56%

Hey, I have forgotten my JVC software CD at home in Phoenix and I am still in NYC with my family. On the disc, it has both the software and drivers for the camera. I went onto JVC's website, however they don't have any drivers online for download. Do any of you know of any site or any way i can get the software and drivers for it.

thank you for your time
 

More replies
Answer Match 49.56%

Will some of the drivers work with Windows 8? Card type is an Intel Atom, processor 1.6 ghz, 60 gb hdd, memory 1 gb (would like to upgrade to a 2 gb if there is a card that is compatible with this model HP Mini Netbook 1000). Currently has XP Home 32 bit and I can't get product key installed because characters rubbed off of Microsoft sticker. I know it's old but netbook can be used for pc computer games.

A:HP Mini 1000 drivers

If you want to try before you buy there is an enterprise trial, Try Windows 8.1 Enterprise | TechNet Evaluation Center.
There is also an upgrade advisor that will give info on compatibility, Upgrade Assistant: FAQ - Windows Help

2 more replies
Answer Match 49.56%

Hi does anybody know where I could find drivers for the Lenovo Thinkpad Mini 10 (3507-A23)?Its not the X100eWindows 7Thanks

More replies
Answer Match 49.56%

I recently installed Windows 7 (Professional) on a HP 300-020. I'm trying to locate drivers for the following devices:  BCM43142A0USB\VID_0A5C&PID_216D&REV_0112USB\VID_0A5C&PID_216D Ethernet controllerPCI\VEN_10EC&DEV_8168&SUBSYS_2B38103C&REV_0CUSB\VID_0A5C&PID_216D&REV_0112PCI\VEN_10EC&DEV_8168&CC_020000PCI\VEN_10EC&DEV_8168&CC_0200PCI devicePCI\VEN_10EC&DEV_5229&SUBSYS_2B38103C&REV_01PCI\VEN_10EC&DEV_5229&SUBSYS_2B38103CPCI\VEN_10EC&DEV_5229&CC_FF0000PCI\VEN_10EC&DEV_5229&CC_FF00SM Bus controller PCI\VEN_8086&DEV_9C22&SUBSYS_2B38103C&REV_04PCI\VEN_8086&DEV_9C22&SUBSYS_2B38103CPCI\VEN_8086&DEV_9C22&CC_0C0500PCI\VEN_8086&DEV_9C22&CC_0C05 Universal serial bus controllerPCI\VEN_8086&DEV_9C31&SUBSYS_2B38103C&REV_04PCI\VEN_8086&DEV_9C31&SUBSYS_2B38103CPCI\VEN_8086&DEV_9C31&CC_0C0330PCI\VEN_8086&DEV_9C31&CC_0C03  Any help would be appreciated. Thanks.  

A:Windows 7 drivers for HP Mini 300-020

 Hi, BCM43142A0http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_121078_1 Ethernet controllerhttp://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_123192_1&sp4ts.oid=5229457#tab4 PCI devicehttp://www.realtek.com/Downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownType... Universal serial bus controllerhttps://downloadcenter.intel.com/download/22824 SM Bus controllerhttps://downloadcenter.intel.com/download/20775

1 more replies
Answer Match 49.56%

Hello computer comrades!

Once again I have ran into a problem that makes me want to bang my head against the wall over and over. My friend just bought an HP Mini off of someone he knew, and all of the network drivers are missing. My initial solution was to go to www.hp.com, input the model # and/or serial # and download the drivers straight from there. No problem right? Well, I cannot find the model # or serial # of this tiny notebook anywhere! I called HP and they told me that there should be a sticker on the back with both listed there, however, they are not.

I went to www.hp.com to just see if I can guess which model this is, but there are hundreds!

Is there any way I can find out the model # of this HP Mini without this sticker that should be on the bottom?

Thanks,

Charlie
 

A:HP Mini Network Drivers

11 more replies
Answer Match 49.14%

I am looking to add a mini tft to my computer, but would like it to run something other than what is showing on my main crt monitor.

eg. i would like the windows desktop running on my main one and a video running on the mini tft.

I have a couple of spare video cards, both have 2 outputs.
One has 1 VGA + 1 DVI (nVidia GeForce3 Ti200)
One has 1 VGA + 1 S-Video (nVidia GeForce4 Ti4200)

Thanks for your help in advance.

AdamBaz
 

A:Monitor + Mini Tft, How?

...
 

3 more replies
Answer Match 48.72%

I have a HP Mini 1101 netbook which originally came with Windows XP Home. That OS suffered some hal.dll error, so I took the opportunity to upgrade it to Windows 7 Ultimate. I want(ed) to update the drivers but according to HP's support site for this netbook it only covers XP Home & Professional & Vista Business & Ultimate.
I was wondering if would be advisable (I personally don't think it is) to update using the Vista Ultimate drivers?

Thanks.

A:Updating HP Mini 1101 Drivers

hi srasc , update your drivers using vista ones in compatibility mode the vista drivers will work perfectly well in windows 7

4 more replies
Answer Match 48.72%

Hallo,
I reinstall windows 10 from reset feature in windows 10, Click mini have some missing drivers now. Anyone know how to get all missing driver as below

thanks in advanced

More replies
Answer Match 48.3%

Hi Guys,

I've been trying to get this device to work for hours, and no matter what I do, I keep getting a messege saying the device driver software was not succesfully installed.

Under Bluetooh Peripheral Device, it says no drivers found.

Has anyone successfully installed the Belkin's Mini-BT dongle, and if so, can someone give me a step by step, how-to on how to do so?

On my iPhone, under Bluetooth, it says that I'm connected to the PC, but on the PC, it says that the BT device needs trouble shooting, and it won't allow me to transfer any files to the iPhone.

Really, the primary reason I got the BT dongle was so that I could use the iPhone's 3G service as an internet connection when I'm away from home.

I'd appreciate any help.

A:Belkin Mini-Bluetooth Drivers - F8T016

Have you been using the system-included drivers, or drivers from an installation disc/download? I'm thinking they're not compatible. Are you on 7 64-bit or 32-bit?

EDIT: I see they work on Vista 32-bit and 64-bit, which means they'll work with both versions of 7. Vista drivers should work with 7.

7 more replies
Answer Match 48.3%

Hey everyone, I was wondering if someone could help me out.I've installed Windows 10 (Not an upgrade) on my HP Mini, I've a couple of issues with drivers but the first one I want to tackle is my bluetooth. In windows 7 it is listed in device manager as:  worked.Atheros 3011 Bluetooth 3.0 + HS Adapter However there doesn't seem to be any bluetooth device in my device manager in Windows 10.  I tried installing the Windows 7 drivers as it's worked on other laptops with friends and family but no such luck in my case. ---------- I have noticed though that my Wifi card is also detected as a different Atheros model than it was previously in Windows 7 too.Windows 7 Device Manager:Atheros AR9285 802.11 b/g/n Wifi AdapterWindows 10 Device Manager:Qualcomm Atheros AR9485 802.11 b|g|n Wifi Adapter Wifi works just fine as it is, but I know some wifi cards will have bluetooth combined and so I've tried install the Windows 7 drivers also for my particular card from HP Support but hasn't made a difference.I've also been looking around the internet for drivers and can't seem to find any official support or downloads for these devices.  Has anyone else had this issue and could share with me how to restore functionality to my bluetooth adapter? Many thanks in advance folks and for reading my post.Keith

More replies
Answer Match 48.3%

Hello, I have a problem with an HP Mini 110 wich i have just reformarted with windows 7, the problems with the drivers where actually manifestating before, I thought that with the formating and the windows 7 instalation would be solved. In the hardware devices list i can see that the network controller, the video controller and the ethernet controller are missing, i tried to install the drivers given at the official website but none of them worked. Please help, i can't connect the computer to the internet! I think that wifi card or internet card, whatever name has, has no drivers installed or they just "dissapeared".

A:HP Mini 110 Missing drivers (Network and Video)

@gerox300 To better help you we would need the exact model number or product number of your laptop/desktop??? http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00033108 REO

3 more replies
Answer Match 48.3%

Hey everyone, I was wondering if someone could help me out.I've installed Windows 10 (Not an upgrade) on my HP Mini, I've a couple of issues with drivers but the first one I want to tackle is my bluetooth. In windows 7 it is listed in device manager as:  worked.Atheros 3011 Bluetooth 3.0 + HS Adapter However there doesn't seem to be any bluetooth device in my device manager in Windows 10.  I tried installing the Windows 7 drivers as it's worked on other laptops with friends and family but no such luck in my case. ---------- I have noticed though that my Wifi card is also detected as a different Atheros model than it was previously in Windows 7 too.Windows 7 Device Manager:Atheros AR9285 802.11 b/g/n Wifi AdapterWindows 10 Device Manager:Qualcomm Atheros AR9485 802.11 b|g|n Wifi Adapter Wifi works just fine as it is, but I know some wifi cards will have bluetooth combined and so I've tried install the Windows 7 drivers also for my particular card from HP Support but hasn't made a difference.I've also been looking around the internet for drivers and can't seem to find any official support or downloads for these devices.  Has anyone else had this issue and could share with me how to restore functionality to my bluetooth adapter? Many thanks in advance folks and for reading my post.Keith

More replies
Answer Match 48.3%

I bought an HP Mini 110-3015dx with Windows 7 starter pre-installed.  I have since swapped out the HD and loaded XP Pro onto the mini (by slipstreaming the SATA drivers -- what a pain).  Anyway -- I started looking for the drivers for the hardware, and the driver .exe that HP lists for the machine for the WLAN won't work.  I run the executable, restart, and nothing -- no new network adapter shows up.  I've tried mapping the driver directly to the extracted folder that's created in c:\SWSETUP, but there are no configuration files (only cabs and executables), so I cannot manually add the driver. Does anyone know the chipset and have a link to the drivers so I can manually map them to the unrecognized devices?  Or is there some other fix?  As much as I like Windows 7, I need XP on this machine. thanks,WLH

A:Mini 110-3015dx Wireless drivers for XP Pro not working

it does this same thing when you upgard to the full windows 7 - even though that is what HP recommends you do. Then HP will tell you to spend $60 for them to fix the problem - becasue this computer is not compatable with anything other than the windows 7 starter - its just a way for HP to make more money once you buy the product.

3 more replies
Answer Match 48.3%

Hallo,
I reinstall windows 10 from reset feature in windows 10, Click mini have some missing drivers now. Anyone know how to get all missing driver as below

thanks in advanced

More replies
Answer Match 48.3%

Brand new mac mini. Want to use HDMI, but when I connect cable, boot up mac and turn on Monitor, the mac starts to go into new product mode, then quickly picture switches to 2 alternating graphic pictures of what looks to be 2 different computers. I gather this means monitor is looking for a suitable source?? By way of a test of the monitor, I hooked it up to a Macbook Pro using DVI and it worked fine. Just no luck with the HDMI. Thanks for any help.

More replies
Answer Match 48.3%

I have a new Samsung U70 USB Monitor.

It comes with a split USB cable that the manual tells me is needed to be plugged into TWO usb ports on my laptop. This is because it is powered via USB and needs the "extra power" i.e. two usb connections.

However, the cable was too short to reach two USB ports (they are on either side of laptop).

So i managed to install the driver with only one usb plugged in anyway. It also now powers up (and seems to work fine) with just one USB plugged in.

Could i damage it this way? Is it getting full power (maximum results) using one USB? Anything that could go wrong?

Thanks in advance.
 

A:USB mini monitor power question!

Could i damage it this way? Is it getting full power (maximum results) using one USB? Anything that could go wrong?Click to expand...

You are taking risks.

That panel consumes 4.5 watts, and the limit of one modern USB port is approximately 2.5watts, I would use both.

USB 5 volts at 500 milliamps = approx 2.5 watts.

http://www.samsung.com/uk/consumer/...s&type=monitors&subtype=essential&subsubtype=

.
 

1 more replies
Answer Match 47.88%

I need to find a driver for a sandisk cruzer mini 256mb. I am running windows 95. I do have 2 USB ports and they are working correctly now.
 

A:drivers for windows 95 for a sandisk cruzer mini 256mb

A Windows 95 driver does not exist for this device. http://www.sandisk.com/retail/drivers-sdcz2.asp
 

3 more replies
Answer Match 47.46%

Are there plans to add BIOS support for Intel's Software Guard Extensions (SGX) to the ProDesk 400 G2 Mini? This system is a 6th generation Core and has both vPro and SGX support. 

More replies
Answer Match 47.46%

Looking to replace my old Iomega Zip Drive with a much smaller and quieter, and larger storage capacity Iomega Mini USB Drive. Currently, have Iomega Sync automatic backup software which came with the Zip Drive. Iomega pre-sales support who I contacted says their Iomega Sync software should work with their Mini USB Drive, but they have not tested it. From experience, does anyone really know if this will work?
 

More replies
Answer Match 47.46%

Are there plans to add BIOS support for Intel's Software Guard Extensions (SGX) to the ProDesk 400 G2 Mini? This system is a 6th generation Core and has both vPro and SGX support. 

More replies
Answer Match 47.46%

Hey folks,

So many devices these days come with a driver on a mini-CD. My laptops (Acer and Toshiba) take forever to access them, then think they're blank and ask to format them.

In Googling this I found a guy who said he fixed this problem by reinstalling Roxio. Said his computer came with it but he'd uninstalled it cause he never used it. That it must "turn on" a feature in W7 or something, cause after he reinstalled it, his computer could read mini's.

When I got both my laptops I wiped all partitions (including the hidden "recovery" one), re-partitioned the way I wanted, and reloaded all drivers and W7 (64 Ultimate). The DVD players in both laptops have a central spindle, so they are designed to read mini-CDs. They DO detect them, but again, think they are blank.

Anyone heard of Roxio or other software being required to read mini's? Thanks much.

PS I have a lot of media software installed but not Roxio. (Nero, ImageBurn, Handbrake, Ashampoo, etc.)

A:Is Media Software Required to Read Mini-CDs?

Windows should be able to read your mini-CDs . You might want to eject the CD and place it in the middle . It will take a few seconds to read the disc due to it size. I never had an issue with mini-CDs being read.

9 more replies
Answer Match 47.46%

I have an Optiplex 790 Mini-Tower with an i5-2400 and integrated Intel HD 2000 video.
The case has both a VGA and Display Port connector, I am presently using the VGA port. I am investigating going for a Dual Monitor setup and am confused whether I can do so without having to purchase a discrete video card. I am reading conflicting reports that some say yes and others no. Can some kind soul please confirm one way or the other ?
I do not use the PC for gaming, it is work only with the occasional video and web browsing. Mainly I need dual monitor for multiple file editing, scripting, database programming etc.
Many thanks, Fin.

A:Optiplex 790 Mini-Tower Dual Monitor ?

Hi Fin,
OptiPlex 790's onboard video solution supports both VGA and DisplayPort at the same time. You can connect two monitors to the computer without adding a discrete card.
Please let me know if you need further information.

4 more replies
Answer Match 47.46%

I'm connecting a Dell monitor using mini dp port on the T460s in addition to the Thinkpad's LCD monitor. So two screens. A few times each day the external monitor will black out and i'll have to plug out the mini dp connector and reinsert it back for it to go back to working. The monitor is not a problem because i have been using it with my old X230 also with mini dp without problems. Does anyone know what might be the problem ?

More replies
Answer Match 47.46%

Due to hideous misfortune I had to do a clean install of my personal copy of Windows Vista and remove the stock Windows XP from my netbook.

Many drivers were added my Microsoft during Vista installation but I have no adapter drivers for either wireless or ethernet controllers. Under device manager I have no category for Network Adapters but instead those two controllers are listed under "Other Devices".

Under HP downloads I found the driver for Qualcomm Mobile Broadband Drivers - Gobi1000 when I went through the process of stating my product ID and OS (Windows Vista Home Premium 32bit). I downloaded it onto my pc, saved it to the flash drive I had to use earlier as a bootable drive to install Vista (knew the lack of native cd/dvd drive would eventually haunt me) and then moved the flash drive to the netbook to run install.

After running the setup a blank 'ms-dos' window popped up, stayed blank and then disappeared. There was no confirmation of success of failure in regards to installation of the driver. But under Device Manager they are still listed under other devices and I am unable to do anything with them.

I downloaded, transported and ran the setups for HP help and support as well as the Wireless Assistant. Both run fine on the Mini. The wireless assistant simply states that Windows has no controllers assigned to find connections to maintain.

I was curious as to whether or not there was something I was missing, the driver was the inco... Read more

A:Mini 110 (1030NR) missing ethernet and LAN adapter drivers after upgrade

If you can get your hands on a third party/USB wireless adaptor, you might be able to use windows update to get the drivers. I've had to do it a few times with an older DELL machine I have.

8 more replies
Answer Match 47.04%

Some people want their Start Menu back. Although I love the new Start Screen and tiles, there are times when I am on the Desktop that I wish I could launch a regular Windows application. Instead of having a bunch of icons on my Desktop, a menu would be better.

I don't like installing additional software, like the Start Menu 'restorers', so I tried to figure out a way to do it without installing anything.

So, here's a way to fake the Start Menu by using the built-in Taskbar functions. It's not as pretty and complex as the Start Menu, but it's sure better than having a bunch of icons on your Desktop or spread across the Taskbar.

A:Make a Mini Start Menu With No Additional Software

If you like, here's another Start Menu toolbar option.

Start Menu Toolbar - Create on Windows 8 Taskbar

3 more replies
Answer Match 47.04%

Hi.

I upgraded my Click Mini to Windows 10 as soon as I got it yesterday.

All appeared well until I restarted it and it would not boot, reporting there was a drive problem.

Eventually, after using the keylogger to unlock the drive, I reset the machine (asking it to keep my files and it has reinstalled Windows 10 but I seem to have lost the Toshiba programs that were on there.

They don't appear in the program list.

Is there a way of getting them back without reverting the unit back to Windows 8.1 in Recovery and then putting Win 10 back on.
Took hours.

Thanks for any help.
Doug

A:Satellite Click Mini L9W-B - Lost software after Win 10 upgrade

If you have ticked the option “Keep my Files” the Windows 10 would still remove apps and settings but it keeps your personal files like pictures, mp3, movies, docs, etc.

Please check this:
Limitations on Windows 10 Upgrade
http://win10upgrade.toshiba.com/swup...on=TEG&lang=en

and here you would find Toshiba Windows 10 Upgrade Information
http://win10upgrade.toshiba.com/swup...on=TEG&lang=en

11 more replies
Answer Match 47.04%

Hi,  I brought a Mini HDMI to DVI cable to use an additional monitor, however i am reading that this dose not typically work with Lenovo's. This seems very stupid! Is there any way to run dual monitor on the 710 or do i need to get a $100 One Link Hub? 

More replies
Answer Match 47.04%

Good afternoon, I have a mini desktop Pavillion 300-240 and im considering buying the Monitor portátil USB HP EliteDisplay S140u (G8R65AA) to use as a portable monitor. I have 3 questions: 1) eventhough its considered an empresarial product there isnt any problem in using it residencialy right? 2) i see the connection of the monitor is only by USB, but i have the DP port in the mini desktop free. Is there an HP cable to connect this monitor USB through the DP port without wasting any of the usb ports? 3) my preference would be for a portable monitor for the mini desktop that when disconnected worked as a tablet. Is there such a product in HPs portfolio? ThanksHugo Silva 

More replies
Answer Match 47.04%

HiI cant get a picture on my monitor using the mini display port, i am using a mini dislay port too hdmi cable, but i dont get anything on the monitor.  My notrebook is a Lenovo L540 with only Intel HD4600 graphic and windows 10.

More replies
Answer Match 46.62%

Im doing this for my Dad, so i have absolutely no idea how to describe the problem but i figured this place was my best shot as google is giving me no results on my query.
There appears to be no monitor drivers installed on the pc... and its running from the bare minimum settings. I think the refresh rate is set at a low low low setting, because lets say, if i move a window by dragging it across the screen, its all choppy, doesnt move smoothly at all... sort of like it jumps every half a second until i stop moving my mouse, then stops. The same with when i'm scrolling in internet explorer... smooth scrolling doesnt exsist! lol

I figured it was a driver problem seeing as there wasnt one installed. So i found the disk with the drivers on, and followed the instructions, which were as follows:
"Right Click" the mouse anywhere on the "BLANK" area on the desktop and click on PROPERTIES.
Click the SETTINGS tab and then click ADVANCED.
Click the MONITOR tab and then click PROPERTIES.
Under MONITOR PROPERTIES, click DRIVER then click UPDATE DRIVER.
On the HARDWARE UPDATE WIZARD, select Install from a list of specific location (ADVANCED) then click Next.
On the next HARDWARE UPDATE WIZARD window, select DON’T SEARCH, I WILL CHOOSE THE DRIVER TO INSTALL. Then click NEXT.
On the following window, click on HAVE DISK.
Type “D:\ENGLISH\DRIVERS” (Where “D” is the drive letter of your CD ROM Drive) on INSTALL FROM DISK window then click on OK.
Highli... Read more

A:Solved: Can't install monitor drivers for AOC flat screen monitor

Additional monitor drivers are usual not needed. What do you have for a video adapter and are those drivers installed? Right click on My Computer choose Properties/Hardware/Device Manager. What information is listed under Video Adapters?
Also what are your screen resolution and refresh settings?
 

3 more replies
Answer Match 46.62%

I did a windows 7 clean install on my HP Mini 210 4051 nr as part of creating a dual boot with Ubuntu. In Linux the internet works fine, but in Windows 7 it does not. In the device manager I see yellow flags over the ethernet and network controllers. Code 28 (My model does have an ethernet port).

Because the machine cannot connect, I downloaded all the related drivers (everything from the network tab) from the HP website for my model with another computer and then put them all in a folder on the Mini's desktop via USB. When I try to install the drivers through the device manager, and direct it to that folder, it says it finds nothing usable.

Here are the IDs

Ethernet Controller
PCI\VEN_10EC&DEV_8136&SUBSYS_338D103C&REV_05

Network Controller
PCI\VEN_1814&DEV_5390&SUBSYS_163610C&REV_00

Any suggestions will be appreciated!

A:HP Mini -Clean Install -Ethernet & Network Controller Drivers Missing

Instead of pointing device manager to those files, have you tried just running the .exe files you downloaded?

That worked for me when I did a clean install on my HP laptop.

1 more replies
Answer Match 46.62%

I am running Windows 7 Home Premium 64-bit
I have tried to install the Mini Partition Wizard of the Home Edition developed by MT Solution LTD

The download completed, when trying to install it in either the Program Files path and also on the Progran Files (x86) I get the same frustrating result in both.
The download came from a reputable webpage Free Partition Magic alternative. Free Partition Manager Software for Windows 7/VISTA/XP/2000 and Windows Server 2003/2008/2000.

It says the the Wizard has stopped working it never opens to show my disks details
The message i get in the details is attached as follows:

QUOTE
Problem Event Name: APPCRASH
Application Name: PartitionWizard.exe
Application Version: 7.0.0.1
Application Timestamp: 4e60e518
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7600.16385
Fault Module Timestamp: 4a5bdb3b
Exception Code: c0000094
Exception Offset: 00064fcb
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 4105
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
UNQUOTE

Was that a Windows 7 originated message or a MT Solution Mini partition originated message?

Then it also says this:
QUOTE
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our priv... Read more

A:Windows refuses to install/run Mini Partition Wizard software ...

You'd do better to create a bootable CD rather than install and run Partition Wizard from your hard drive.

With a bootable disc, you can create and edit partitions without hindrance as you'll be booting into Partition Wizard rather than Windows.

Partition Wizard Bootable CD allows user to boot computer directly to manage partition.

5 more replies
Answer Match 46.62%

a newbie ?...
 
i am comparing a YouTube video (The Jungle Book 2016) between my SG5/iPad mini/32" LED monitor, an am noticing that he SG5 is much sharper/clearer than the other two...is this normal?  
 
thanks much...

More replies
Answer Match 46.62%

Hi,
 
I have a T450s and since I updated to Windows 10 I don't get anything out of the mini-display port. I have tried installing all new drivers and updating the BIOS per Lenovo's support website but I still can't get an external display to work over the mini-display port. Please provide a solution to this problem!
 
Moderator note: Post moved to T series forum.  Model added to subject.

More replies
Answer Match 46.62%

I have a new HP Mini 210-2000 with Windows 7 loaded. I have a Samsung flatscreen monitor plugged in. I can duplicate the desktop on the second screen, but cannot find an option for using an extended desktop in Windows 7. Is this a limitation of the HP Mini 210, or is there some setting that I have missed?
Thanks
Bruce P

A:No extended desktop option in Windows 7 on HP Mini 210 with additional monitor

Info from Microsoft on dual monitors -

Dual monitors: How to connect two monitors to one computer
Guided Help; Dual monitor setup is easy in Windows 7
Set up multiple monitors

HP Mini 210-2000 PC series - HP Mini 210-2000 PC series*-* HP Business Support Center

1 more replies
Answer Match 44.52%

Hi everyone.
I have an Alienware 15 R2 (i7 4720HQ, 970M, 16GB, FHD) running windows 10.
I have set it up in desktop mode by connecting it to ASUS MG28UQ 4K monitor, mouse and keyboard. The monitor is connected through the laptop's mini dp port.
The problem is that when I boot up the laptop with the monitor connected, the laptop's internal sound card (SoundBlaster Redcon 3di) does not function, and is not available in the audio playback devices menu. The intel display audio works, though.
But when i shut down the laptop, disconnect the monitor, and then boot it back up, the sound card is detected and functional, and stays funtional even after i connect the monitor to laptop after it has booted. It keeps working until i reboot, after rebooting the same thing happens.
Any ideas what might be going wrong?

Things i tried:
reinstalled sound card driver
windows troubleshoot

Thanks in advance  

A:Sound Card not detected when laptop boots up with external monitor (mini dp) connected - Alienware 15 R2 (4720HQ)

First, make sure that the display audio device is not 'disabled' in Device Manager. When connected through HDMI this should be enabled. If it is disabled, try enabling it and see if that resolves the problem.

Second, I would suggest downloading the latest graphics drivers from Intel. This should also update the HDMI audio drivers, and may fix the problem. You may also need 4th Generation or later CPU graphics drivers. You may want to download Intel's driver updater, to automatically search for drivers.

1 more replies
Answer Match 42%

Hi I am looking at these two laptops. Currently at home I have vodafone mobile broadband. I read that these 2 laptop are not compatible with mobile broadband for whatever reason. Is this true? and if this isnt true I have my mobile broadband installed on another laptop, I am guessing it is okay to install on 2 systems, thanks a lot in advance
 

A:Dell mini 10/mini 10 v compatible with mobile broadband?

9 more replies
Answer Match 40.74%

I can not find drivers for windows10my computer is HP G62-b54SE Notebook PCplz help

A:drivers&software

@Opada You will need to find the hardware ID for each one and search for the driver. http://www.wikihow.com/Find-Hardware-ID You can also post the ID here and we could help to find them. REO

1 more replies
Answer Match 40.74%

I am trying ot run game software and language software. It says No drivers. Where Could i get Drivers and DLLs?

Thanks

A:Software drivers

Hello teak and welcome to the forums

Could you please specify what programs you are trying to install? Does it mention any drivers in particular? Or give you an error code?

Tom

6 more replies
Answer Match 40.74%

Hi,

I've got a HP 3330 printer/scanner/faxer
I have a cd with the 32 bit drivers for it along with the software
I just upgraded to a 64 bit OS.
I downloaded the 64 drivers from the hp website but the damn thing dont come with the software.
So i tried to use the cd to install the software but if it installs the software it HAS to install the drivers too! (32 bit, incompatable)

I just need the software to use the printer to scan something.
Is there a free software or something i can do to scan from the laserjet?
 

A:HP Drivers do not come with software.

You may be out of luck.
I believe the 32 bit software and drivers will work just fine.
 

3 more replies
Answer Match 40.74%

is there any software app that can find all updates for drivers? without me having to search the net?

A:software for drivers

There's a few knocking about, but never actually used one, apart from a beta one uploaded here a while ago, which was registering Intel systems as AMD and vice versa, so have chose to stay well clear of them altogether.

9 more replies
Answer Match 40.74%

Hi everyone!! How can i get the updates for my Laptop with Windows 10?  And will it be available for my model. Thank you !

More replies
Answer Match 40.74%

I currently lost the driver for a monitor, and now I can only get 16 bits of color, how can i get the driver back with at least 256 bits of color? It is a packard bell monitor
 

A:monitor drivers

Its the video card rivers that you need . Look in device manager under video adapter for a red x or exclamation point. If so then you will need to reinstall its drivers.
 

2 more replies
Answer Match 40.74%

Well found the first thing wrong with the CP Review; it doesn't support "Plugable's" USB device used for supporting three or more monitors. Checked on Plugable's website and downloaded the new drivers, albeit that was a no go. Left a message on there site will see what comes of it in a couple of days.

. . .boowho, now I am without three monitors. It makes me sad.

Edit: Plugable now has "Beta" drivers for their device. Thus far all is working just fine. It is good to see Win 8 working on three monitors.

More replies
Answer Match 40.74%

I have a Compusa 17 inch Monitor, sku 189150
Does anybody know where I can get the drivers for this?

thanks
 

A:drivers for my monitor

CompUSA does not really make monitors. It is probably some rebranded thing from a real monitor manufacturer. Look at the sticker on the back for some model or serial number that could hint the real company that made it.

Strictly speaking you don't need drivers for a monitor. Just choose any decent monitor from the list Windows gives you and force that. Then just try out the refresh rates and resolutions to see which ones actually work with your monitor.
 

4 more replies
Answer Match 40.74%

hey ya'll.. i have a compaq monitor 171 fs i cant get the settings to work in the settings.. i need the driver for this monitor if any one knows where i can get on i would apr. it im running win 98
 

A:monitor drivers

Found this one at drivers guide

Manufacturer:
Compaq

Device Type:
Monitors

Model:
Compaq 171FS

File Name:
cpq_mon.inf

Size:
60429 bytes

OS:
Windows 95a
http://www2.driverguide.com/cgi/download.cgi?uploads11/15560/cpq_mon.inf
 

2 more replies
Answer Match 40.74%

Been trying to get an older system put together to learn LINUX and can't find Monitor/screen resolution drivers for Samsung's Samtron 77V s monitor. Samsung's site doesn't even acknowledge that they ever built it. I can plainly read the model number, serial number and the date of manufacture on the plate at the back and the admonition that Samsung will sue the bejesus out of any one who illegally modifies or otherwise alters, tries to alter or deface the equipment.

Any help out there? I'd like to get up to about 1040 by 768 on it. While it was attached to a PC in the office it ran at that resolution, or even tighter.
 

A:Monitor drivers

16 more replies
Answer Match 40.74%

I'm using a gereric monitor. I'm having problems getting my video card to work. Do i maybe need new drivers for my monitor. I'm trying to install a ati graphics pro turbo mach64 gx card. my resolution looks like junk all of a sudden. i got scanlines and everythings all 16 color looking. i'm using windows 98. and running a pentium III.
 

A:Monitor Drivers

The driver for the video card should be all thats needed. If you have installed that, the problem is probably in the settings within that video cards program
 

1 more replies
Answer Match 40.74%

Hello!

I just made a clean install of Windows Vista and I was going through the process of installing drivers from diffrent CDs when I found a CD for my NEC monitor. I have a MultiSync EA231WMi monitor. I inserted the CD and found that there is a folder named Drivers and inside that folder there are 3 additional folders named according to the model number; E222W, EA221WMe, EA231WMi. The EA231WMi folder contains following files:

ea231wmi.cat
ea231wmi.icm
ea231wmi.inf

What am I supposed to do with these files?...

Do I really need these files? I mean, my monitor is working, so what is there to install?... what is there to "drive"?

Thanks!
 

A:Do I need drivers for my NEC monitor?

6 more replies
Answer Match 40.74%

Hey guys, in device manager i seen that i have the average plug and play display driver and i was wondering if there is need for me to download my monitor driver from acer ( Acer al1916W) and what does that driver actually do.? better res.?

thanks
 

A:Monitor Drivers

I've installed Dell drivers for mine in the past but never really see any benefit to be honest. Whether on VGA or DVI.
 

1 more replies
Answer Match 40.74%

I recently switched my monitor driver to the Plug and Play driver, but have now switched it back to the optiquest v73 driver. The problem is that now it will NOT let me select as many colors or as many pixels as I had before. For example, the list only goes up to "High Color" when previously I had "True Color." Yet even when I select High Color and then reboot, I am still in 256 colors. Similar problem with resolution.

The driver I am using is called MONITR11.INF; it also tells me I am using an "Optiquest V73 on NVIDIA GeForce 4 MX 440", which is true.

Aditionally, shutting down now causes Windows to close and the screen to turn black, but not the tower to turn off.

I believe I have done nothing with the video card or its drivers that could have caused this.
 

A:Monitor Drivers: Act II

7 more replies
Answer Match 40.74%

Hi
i just wondered if anybody could help. i have been searching for monitor drivers fro a dell trinitron D1526T-HS. i have just bought a second hand computer and monitor from seperate sources. my computer is a crix chip 333 cannot find any make on motherboard except P5Sd-AS rev1.0. have searched dell site and others with no luck. can anybody help.

many thanks
 

A:monitor drivers

Generally the Plug-n-Play Monitor Monitor driver supplied by Windows by default is just fine and most monitors do not require anything more. If you only have 16 Colors and a resolution of 640x480 then you may need to install teh Video Card drivers to get anything higher.
 

3 more replies
Answer Match 40.74%

I am looking for drivers for my Ipex 15inch monitor.
 

A:Drivers for my Monitor

You should be able to use the windows default drivers for this, but here's the link anyway.

http://drivers.ipex.com.au/
 

3 more replies
Answer Match 40.74%

Hello guys and gals

I recently bought a second monitor for a steal (19" LG). I have been studying up before I actually wanted to install it. Many places say that you need to install the monitor drivers and other places say you don't. So my questions is that have any of you had experience hooking up a second monitor, and if you in fact need drivers or not. When I purchased the monitor it came with no drivers.

Many thanks

A:Drivers for 2nd monitor?

it depends on the input sometimes too a (d-sub) or dvi monitor. (it will only be these two in this case as their wont be a HDMI cable for a 19" monitor)

I recommend you just plug it in, most of the time it will just work, seriously.
If it doesnt that's when you look for the drivers. How are you trying to plug it in, what input are you using? But before you do all this (just to make sure) update your display drivers and your graphics card software first because when you do this, it will eliminate the chances of having to do this later.

Im getting 4 monitors after I hook my pc up into SLI, 2 is fine for me atm. But monitors shouldnt be a problem.

3 more replies
Answer Match 40.32%

I'm back on an HP laptop after having spent the last few years using a Dell Precision M4600 (which I miss already). I was hoping that HP would have improved their Driver and Software download site to provide more and better information to help users identify applicable drivers, but sadly it doesn't appear that much as changed. The website still leaves it to the user to determine which drivers and software apply to a particular computer. There are a number of cases where if you look at the revision history for a driver, for example, the Intel I217LM/V and I218LM Gigabit Ethernet Driver, there are versions of the driver available that are newer than the "recommended driver". Here is what's on the website: Version:1.00 S (13 Feb 2015)Version:12.12.80.19 A (8 Dec 2014)Enhancements- Provides improved support for Connected Standby.- Provided improved messaging when the system resumes from standby mode.- Provides improved ultra-low power (ULP) performance while the system is connected to or disconnected from an external audio cable.Version:12.12.50.7205 A (26 Aug 2014)Enhancements It's not obvious why the revision history would show newer versions of drivers if they are not applicable, but if they are applicable, why does the website not recommend the newest version, instead of the version from 26 August 2014? Both Intel and Nvidia have newer drivers available for the network adapters and display adapters, respectively. Does anyone get drivers for these... Read more

A:Drivers & Software Questions

To answer your question, yes you may absolutely download newer drivers direct from the manufacturer (Nvidia or Intel etc) website if you wish. The drivers that are on the HP website are the most recent ones that have been tested to work specifically with HP hardware, which is why sometimes you might see a difference in the versions.  I would definitely recommend running either HP Service Assistant or Softpaq download manager to help keep your drivers up to date. This will take a lot of the guess work out of whats needed and will save you time from having to keep checking the website for updates to drivers. You can even set the downloads to occur automatically if you wish! I hope that this helps to clear some things up and point you in the right direction. Please don't ever hesitate to give us a call if you need help with your Zbook at 866-625-1175. 

7 more replies
Answer Match 40.32%

hi!

I want to update my drivers.Is there any software which can tell me which drivers need to be updated.Basically it should scan my hardware and tell me to update the drivers.

A:software to update my drivers!

You're better off going to the manufacturers websites, a lot of those programs aren't always accurate.

5 more replies
Answer Match 40.32%

HELP, HELP,

I recently purchased a new ASpire (ACER) computer with VISTA already loaded. I am not able to use my printer (Lexmark) drivers are not yet available to run with VISTA and there is another software I use for personalized books, which is not compatible and they say it will not be for about six months.

What are my options; I'm told VISTA is the os of the future as far as Windows is concerned.

I feel like I should take it back and find a system with XP OR I was told I could load XP on my current system - I am not sure about this.

What are the pros and cons to the above?

PLEASE HELP.

Myday
 

A:Software/drivers incompatibility

11 more replies
Answer Match 40.32%

hi
is there any software that update and remove old drivers for hardware like chipset ,videocard ,audio drivers ???
i dont want mess up my pc ,by removing or deleting something that doesnt need to be deleted .
free softwares welcome and to pay for one : its ok if its less than 30 bucks
thanx for any response , i searched in google ,but i couldnt find something good .
 

A:any software that update drivers ???

anyone heard of this kind of software ???i guess no one
 

2 more replies
Answer Match 40.32%

I'm running Vista Business 32 bit. Do I need any other software installed to get games working properly? Additional codecs or Java or Quicktime? Or will the Business version runs games as good as Vista Home Premium?

More replies
Answer Match 40.32%

I wanted to hear your opinions on what software you think is more reliable for updating the drivers. The reason I ask is because I am currently running two driver update programs but each of them are showing different updates for the hardwares. I read somewhere that drivers for 64 bit processors are difficult to find and those companies usually update the 32 bit.
 

A:Software for updating the drivers

Let`s stop using such a programs.Best drivers are from Manufacturer`s website.

13 more replies
Answer Match 40.32%

I can't anylonger install my HP 6500 E709 series printer on my ASUS laptop. I have Windows 7 professional loaded and still gives me an error. Operating sytem on the computer not supported. Current OS. 601.00

support: Vista 64 bit, Vista, Windows XP

A:installing drivers and software

  
Quote: Originally Posted by johodun


I can't anylonger install my HP 6500 E709 series printer on my ASUS laptop. I have Windows 7 professional loaded and still gives me an error. Operating sytem on the computer not supported. Current OS. 601.00

support: Vista 64 bit, Vista, Windows XP



You can install the viswta driver in compatibility mode.

right click the installer>properties>compatibility>choose OS
Ken

3 more replies
Answer Match 40.32%

Hi,
I am using a notebook which has windows 7 professional operating system on it. I use Windows XPMode to operate software applications that cannot run on a 64bit system. In general my system works fine in both Windows7 and XPMode, however, if I have to install
new software or drivers and if I get any updates for my computer it appears to cause problems whenever I next log on.
The computer boots up to the log on page, but my mouse and keyboard do not work, so I cannot access my log on profile or enter my password. Each time this happens I have to restore my computer to and earlier restore point just to access my device, but this
is not a good situation because I currently have to add new software for a particular application. I think that there is a conflict between the Windows7 and WindowsXP that might be causing this and am not sure how to go about resolving this issue. Any help
would be greatly appreciated.
Regards,
KFin.

More replies
Answer Match 40.32%

Hello all, just tried to re-install my printer/scanner and after re-booting my computer the new found hardware wizard could not locate the software.

I once had a CD that came with it but since lost it. I have no Ideal where to start. Any help would be arreciated Thankyou.
 

A:Software/Drivers for LexmarksZ82

http://downloads.lexmark.com/static/229-1-0-294.html
 

4 more replies
Answer Match 40.32%

Hi!

So I just got a mp4 player from a friend, he also gave all the original stuff except for the box...
In the "Pocket Guide" it doesn't say anything about any web pages or bran or anything
useful and the original cd is so badly scratched that the cd drive don't even recognize it as
a cd and when i google i can only find some random forums but nothing useful and no
downloads...

So plz hlp me, I can't even get music to the player without software :/

on the back it says "zero3" and on the fron "M.series"

thx in advance!
 

A:Need drivers and software for mp4 player

Did you even try searching Google? Here is a link I found by putting in the search box "zero3 M series mp4" It nneded to be translated from Estonia to English. I'm not sure how far you can go with the link but its a start.

Link: http://translate.google.com/transla...&prev=/search?q=zero3+M+series+mp4&hl=en&sa=G
 

3 more replies
Answer Match 40.32%

When I try to download drivers , I get the following error message We were unable to retrieve the list of drivers for your product.  Please select the desired operating system and select ?Update? to try again.

A:software and drivers update

@Sounakroni? Your drivers are here. http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7771404/model/8326104 REO

1 more replies
Answer Match 40.32%

Is there a program out there that can help me uninstall/remove "drivers detective software". I am running Vista. I am running out of patience with this dang program. I hate it and cannot uninstall no matter what way I go - am hoping someone can help me.
 

A:drivers detective software

and welcome to the Forum

Try the Revo Unisntaller . . http://www.revouninstaller.com/revo_uninstaller_free_download.html
 

1 more replies
Answer Match 40.32%

It would be easier to explain what actually works on my system but here it goes.
When having high speed internet installed on my system the tech decided that my computer would be the one that he destroyed that day. He thought it would be nice to erase several programs in windows 98 se and didn't bother to let little old me know what he did or how to rectify the situation. after the attempted installation upon start up I received more error messages than than SPAM in my e-mail. The system informed me that several windows files were corrupt and I could not even use my office 2000 programs??? Well I was a little miffed but trekked on and tried to reinstall my windows however, he erased my driver for the a: drive and I had no way of reinstalling. Now I'm not real smart but I knew I was in trouble when I YES I, erased windows from the C:drive. I knew that I, as well as, my computer needed some professional help. A friend of mine finally managed to get windows installed and I know you'll be as delighted as I was to find out that I could use my office products once again.
Now it seems that my drivers for my monitor are gone, the computer won't recognize my 10/100 eithernet card and my voodoo 2 3D driver is gone as well as my sound card driver.
To compound joy upon joy I no longer have my windows 98se CD's they decided to join that one sock that escaped from the drier in some time space continuum where intelligently challenged people like myself have no acces... Read more

A:Where Oh where has my Monitor/Modem/Drivers gone???

Well......

I guess you're not having the best of luck, huh?

How (if I may ask) do you acquire this system? I'm assuming that it came fully loaded, and that your sound, video, and ethernet card came loaded with the system. If this is the case, then I'll also assume that you were not given the software CD's or floppies that contain the drivers for your hardware.
You'll probably have to go to the websites of the manufacturer's of your equipment, and enter your hardware model numbers into a driver search. If you can tell us the exact models of your cards, then we can probably point you in the right direction.
As for the Win98 CD, try asking around if anybody has a copy that you could borrow. Failing that, you could start kissing the butts of your IT guys at work. They might take pity on you and let you "borrow" a copy.
 

2 more replies
Answer Match 40.32%

I can not find the video and monitor drivers for a hp pavilion 4533. Can any one find the drivers for me?
 

A:video & monitor drivers

try this link click here
 

1 more replies
Answer Match 40.32%

Hey ALL ! Hope every1 is well !?!? Got new MOBO+Processor last week. Now i`m rebuilding drivers. Ckekd monitor driver+ seems I have two drivers working under DEVICE MANAGER. Default Monitor + the one thats only supposed to be there- Samsung Samtron 75E(M) (PLUS)/75V . Which of these are operating my monitor? And i tried remove the DEFAULT MONITOR to only have it reinstall on reboot. How can be sure my SAMSUNG is PRIMARY driver? Plz HELP ? Thanks in advance folks! Later Dean
 

A:Two Monitor drivers? -98se

Well, if you only use one monitor and it is working then there is no problem, the Samsung monitor is the primary and it seems the only one running. Your video card likely supports dual monitors or TV out and that's why there ae two entries. Monitor drivers are also generally not that important, most people run with the default driver, it is the video card driver that is important - it is what sends the picture to the screen.
 

1 more replies
Answer Match 40.32%

Looking for drivers for L5009 Touchscreen monitor to work with a 64-bit Linux kernel. I'm going to try the EloTouch APR drivers, but was wondering if anyone had gotten one of these working with X-11.

A:Drivers for L5009 monitor.

cynjut Sorry, but I checked the product page for that monitor and HP does not supply and Linux drivers. My suggestion is that you check the community forum for the Linux distro that you are using, as they generally have lots of information on alternate drivers in their hardware sections. If you don't know the location of the community forum, then check this site, as they have links to the different distro websites:  http://distrowatch.com/ Good Luck========================================================================I am a volunteer and I do not work for, nor do I represent, HP.---------------------------------------------------------------If my posts helped you, please click the Thumbs-Up symbol on the left of the Reply button to say thanks.If my posts solved your problem please click "Accept As Solution" -- to help others find the solution.========================================================================

1 more replies
Answer Match 40.32%

My system is Win XP Home Edition SP3 and up to date. I have just bought and installed a new monitor an AOC 2436Pwa. I switched off my PC, plugged in the VGA cable at both ends and attached the power cable. Started PC and I have sound and vision, I inserted the Installation CD that came with the monitor and read through the various instructions. I went to install the driver on the disc and followed the instructions but when I am asked to choose the drive for the disc Windows tells me that there isn't anything there. Even when I browse to the disc drive I get the same result. Windows seems to be using the same plug and play driver as was used for my previous two monitors for this new one. Two questions, is it neccessary/better to install the drivers which came with the monitor instruction disc or and will it have any advantages or should I just leave it as it is?.

A:New Monitor Drivers won't install.

I have never had to use a montior driver. If it's not broke, don't fix it.

2 more replies
Answer Match 40.32%

My monitor has been acting funny lately...when i would press the power button for my PC, the monitor wouldnt come on until i restarted the computer about 5 times. Then when it was on sometimes the monitor would turn funny and then it would restart automatically. Im running windows xp.
Im using a Compaq MV740 on NVIDIA TNT2 Model 64 Pro.

<Category name="Display">
<Data>
<Item><![CDATA[Name]]></Item>
<Value><![CDATA[NVIDIA RIVA TNT2 Model 64 Pro]]></Value>
</Data>
<Data>
<Item><![CDATA[PNP Device ID]]></Item>
<Value><![CDATA[PCI\VEN_10DE&DEV_002D&SUBSYS_001710DE&REV_15\4&DFB3C15&0&2808]]></Value>
</Data>
<Data>
<Item><![CDATA[Adapter Type]]></Item>
<Value><![CDATA[RIVA TNT2 Model 64/Model 64 Pro, NVIDIA compatible]]></Value>
</Data>
<Data>
<Item><![CDATA[Adapter Description]]></Item>
<Value><![CDATA[NVIDIA RIVA TNT2 Model 64 Pro]]></Value>
</Data>
<Data>
<Item><![CDATA[Adapter RAM]]></Item>
<Value><![CDATA[16.00 MB (16,777,216 bytes)]]></Value>
</Data>
<Data>
<Item><![CDATA[Installed Drivers]]></Item>
<Value><![CDATA[nv4_disp.dll]]></Value>
</Data>
<Data>
<Item><![CDATA[Driver Version]]></Item>
<Value><![CDATA[6.14.10.4523... Read more

A:Problems with my monitor/drivers

8 more replies
Answer Match 40.32%

Hi
I have an AOC Spectrum 7Glr monitor and i have just installed SP2 and the resolution and colour are wrong and when i go to display properties ->settings -> advanced -> monitor -> there is no option to change or update the driver.

All the tutorials i have found on website say to update from there - how can i install drivers to make this work properly?

Cheers
Ryan
 

A:Installing Monitor Drivers

16 more replies
Answer Match 40.32%

I've no idea what's going on here, but NONE of my drivers are updating and anything new I plug into a USB port, windows 7 won't have anything to do it.

I'm certain something is missing. I don't know if it's a virus or some kind, but I can tell you now that my install shield (64 bit) is missing.

What on earth is going on? It won't even recognise a new mouse or keyboard!

There really HAS to be a way of fixing it. I posted a few pictures about it but it seems strange that it won't even install a monitor properly???? The monitor I'm using now is still usable, but it doesn't have it's own driver and as a result some software won't work on it as it acts as a secondary monitor (although it works fine and is actually pretty darn good).

Is there a way around this? I've tried an update and windows still won't detect it!

Please help, reinstalling windows is a real pain as I have a custom made PC that my friend built (who has now moved away really far) so I have no idea how to reinstall the graphics card, do a proper partition, etc. And I know NOTHING about this. If I did it I may screw things up and lose all the saved stuff on my partition.

If someone could help out that would be much appreciated.

Regards-

BOC.

A:None of my drivers are updating! Not even my new monitor!

Seems like corrupted windows.Run SFC /SCANNOW Command - System File Checker test.

If it doesn't solve your problem you can try repair install Repair Install

5 more replies
Answer Match 40.32%

I have a plug and play monitor, model number ADV-172 REV A. I was hoping if someone could help identify the make, so I could see if there were any drivers available for better performance etc. Any help would be appreciated as this has been niggling me for months.
 

A:I need to identify a monitor for drivers

Hello and welcome to Techspot.

Your monitor is an Advent ADV-172. It is a cheap plug and play monitor, and therefore wont have any drivers available.

Regards Howard :wave: :wave:
 

2 more replies
Answer Match 40.32%

Hey Guys, I just bought a HP Pavillon desktop with a W1907 19 inch flat panel monitor. I've been using it for a couple of days and everytime that I turn it on a dialog box pops up stating that software has been detected. This software is the device drivers for the monitor, and it asks me if I would like to install them. But when I try to install them, an error message states simply that the installation failed due to an error. It doesn't even tell me what the error was! All it says is to go to the site of the company that made the monitor for support. So I go to the HP website, and try to download the driver from there. Lo and behold, it won't install AGAIN! It says it failed to install because an error occured. I cannot tell you how frustrated I am that this unit is ALREADY having problems, and that HP won't tell me what the error is! So can someone out there please help me?
 

A:Can't install drivers for my monitor

Have you tried going to the Event Viewer and check to see if there was a log of this error created?

Right click on My Computer > Manage > Event Viewer.
 

1 more replies
Answer Match 40.32%

I am running Vista Home Prem.I use an 8800 GTS EVGA.I have the latest drivers for my 8800. I run 2 Viewsonic monitors. One is a VG900b and is fine. I also run a VX2235 digital monitor. Both monitors are listed in device manager by model. I manually installed drivers directly off of the discs.I have also downloaded Viewsonic's monitor drivers. I can't get my 22" to go to it's native resolution of 1680x1050.I have had these installed for a long time and working fine. When I ran a hard disc error check that is listed under tools under properties of my computer it erased my 22" and it's capabilities to operate @ native resolution. Another difference is that before I manually installed the VX2235, it was listed as a 'non plug and play monitor' under device manager. I have never seen that before. Does anyone know how to fix this? I am this close to going out and buying a new XP Pro disc.
 

A:Viewsonic monitor drivers?

Why not just uninstall the monitor drivers you installed and reboot and use the Vista drivers?

Start there.
 

2 more replies
Answer Match 40.32%

I've been doing OK with the driver issues in Vista x64 but have run into a road block with the monitor drivers.
It's a Viewsonic Graphic Series G220F and I have the Vista x64 driver from View sonic but it doesn't install.
They even know it won't install because at the end of installation there is a pop up telling you how to manually install the driver-which doesn't work either.
Everything installs to C:\Viewsonic. About 50 to 75 .icm files including G220F.icm. obviously the one I need. There are also 11 .inf files, 3 of which contain install info for this monitor. But no mater which .inf I use to install- it can't find another file, G220F.icm I assume, and aborts the install. I can manually point windows to the .inf file but there is no way to point the .inf file to the .icm file.
Can someone tell me how to solve this or is there a universal Vista64 display driver other than the ones with it? 1024x768 is as good as it gets.

A:Monitor Drivers won't install

the drivers for the monitor are usually part of windows and don't need installing
you set the resolution from nview which is part of your nvidia drivers installation
you can access it from the control panel

1 more replies
Answer Match 40.32%

Ever since I put on a new version of xp the display on the monitor flips when I scoll, as if with each scroll a new page appears. It is not a smooth steady scroll. I have been told that I need video drivers. My monitor is a 17in StarLogic. Is this true? If so where I can get them? franklingreen.

A:[RESOLVED] monitor drivers

Hello and Welcome to TSF

Lets get some info first.

Please elaborate on "put on a new version of xp ",
What do you mean by this?

19 more replies
Answer Match 40.32%

Hey, im a gamer and i must have my 120 hz on my crt but im bottle necked by this annoying 85 hz... I have a DELL M992 monitor and my drivers are outdated for 32bit and im on a 64bit windows 7, i read a guide where you can modify your .inf file so it reads it. The inf was 32 bit but i think im doing it wrong can anyone help me out... This is the link to my drivers (multiple files) Drivers and Downloads

Heres the .inf file:
;================================
;M992.INF 03/27/02 Ver. 1.0 PCC
;Copyright 1996-2002 Dell Computer Corporation
;
;This is a setupfile for M992
;
;================================
;
;------------------------------------------------
[Version]
signature="$CHICAGO$"
Class=Monitor
ClassGuid={4D36E96E-E325-11CE-BFC1-08002BE10318}
Provider=%Dell%
CatalogFile=M992.cat
DriverVer=03/27/2002, 1.0

;-------------------------------------------------
[ControlFlags]
ExcludeFromSelect.nt=Monitor\DEL300E

[DestinationDirs]
DefaultDestDir=11
M992.CopyFiles=23

[SourceDisksNames]
1=%DISK%,,,

[SourceDisksFiles]
M992.icm=1
; Manufacturers
;-------------------------------------------------
[Manufacturer]
%DELL%=DELL,NTx86,NTAMD64

; Manufacturer sections
;-------------------------------------------------
[DELL.NTamd64]
%M992%=M992.Install.NTamd64, Monitor\DEL300E

; Install Sections
;-------------------------------------------------

[M992.Install]
DelReg=DEL_CURRENT_REG
AddReg=M992.AddReg, 1600, DPMS
CopyFiles=M992.CopyFiles

... Read more

A:Modifying monitor drivers HELP! :(

In my personal opinion, gamer to gamer.
Unless you ant to destroy 1 or more of three things, The os, video card or the monitor itself.
I wouldn't play with drivers. Leave it to the pros. You may be able to find a third party driver that would work though

9 more replies
Answer Match 40.32%

i upgraded from windows 98SE to windows 2000 pro....i now cannot see all of my screen....i have an HP D5259a Pavilion M70 monitor...even doing a google search, i am unable to find a driver for this.....i didn't find one on drivers.com.....does anyone have any clues about where to go to find a driver?
 

A:HP Monitor drivers for win2k

6 more replies
Answer Match 40.32%

I recently downloaded the latest drivers from ViewSonic's page and isntalled them, and upon rebooting I had weird resolutions listed. Missing are 1024x768, 1280x1024, and 1600x1200. Instead I have ones like 1280x720, 1280x768, 1280x960, 1360x768, 1600x900, and 1600x1024. I Desperatly need my non-distorted resolutions back!! I have tried uninstalling the drivers and the device. I have also tried to just change to a Generic driver but the resolutions are the same. HELP!!!!
Monitor : ViewSonic A90f+ UltraBrite
 

A:ViewSonic Monitor Drivers

10 more replies
Answer Match 40.32%

Having an issue with my monitor.
(i should not i have been using this monitor for a long time with this comp...i think it came unpluged and that caused the problem)
It is on all during start up but as soon as windows loads the monitor goes to stand by and i have a blank screen.

I tried to start it in safe mode(how do you do that anyways....i have to turn it off during start up for it to get the menu) and it works fine. this leads me to believe it is the video driver.

I read the trouble shooting on how to instale a new moniter driver but in safe mode there is no "drivers" tab.

Any help would be great.

PS

i am having an issue with safe mode. it enter safe mode and some text scrolls.
more than a page of multi(0)rdisk(0)partition(1)\windows\system32\driv ers\mup.sys
is the last line and it freezes there...not sure what that is all about but i can no longer enter safe mode.....

i'm really up a creek..plz help
 

A:Monitor problem..maybe drivers?

7 more replies
Answer Match 40.32%

I just reinstalled XP on my computer, and I was previously using a Optiquest (Viewsonic) widescreen monitor. A used the included disc to reinstall the drivers after I reinstalled windows, and the software is unable to configure the drivers. The installer automatically opens a text file which tells me to open the hardware manager and open the "+" next to the Monitor. I don't seem to have a monitor on the list, and I'm not sure what to do. The correct screen size is not available from the display properties tab, presumably because I haven't configured it properly. Any ideas?

Thanks!
 

A:Cannot install monitor drivers....

Ethan88 said:

I just reinstalled XP on my computer, and I was previously using a Optiquest (Viewsonic) widescreen monitor. A used the included disc to reinstall the drivers after I reinstalled windows, and the software is unable to configure the drivers. The installer automatically opens a text file which tells me to open the hardware manager and open the "+" next to the Monitor. I don't seem to have a monitor on the list, and I'm not sure what to do. The correct screen size is not available from the display properties tab, presumably because I haven't configured it properly. Any ideas?

Thanks!Click to expand...

Hi Ethan.
Viewsonic is plug & play so once connected should self install and work.
Check it out here. Start / Control panel / Administrative tools / Computer management /Device Manager /Your Viewsonic should show up there.The disks that come with Viewsonic can be a little temperamental, Widows as all the viewsonic updates click onto windows updates use the custom setting and run,then in the left panel choose hardware updates.you will probably see the viewsonic latest update there and any more you may need for your PC.
Good luck
Rex
 

1 more replies
Answer Match 39.9%

So right now i recently got a duo monitor setup. Before I had my 2nd moitor be my TV for movie purposes. Now i have 2 actual monitors 2 19" 1440X900. So far i downloaded a program called DUo Monitor to help it basically adds a taskbar to my second monitor.

Now i want a program to help me calibrate the brightness and color to be the same on both screens. I tried doing this manually but it's taking quite a bit and i am nowhere near. One is a Gateway other is a Dell.

Also any other tips and hints of what i can do would be appreciated.

A:New to Duo monitor, need software

Hi Chris -

Have you installed the full software for your Display adapter (video card) to see what options it has? Normally this is the next step if you don't get enough choices on the context menus when you rightclick on Desktop which is where dual monitors can be quickly configured.

6 more replies
Answer Match 39.9%

So I am going to be reformatting my PC. It's an Asus computer that I bought used from Craigslist and it didn't come with a driver backup CD. Also it doesn't have a recovery partition on it either. So I am wondering if there is any free software that will allow me to backup, and then restore all my drivers after I have reformatted the computer. I searched some of the other threads and a few people suggested Driver Max. Driver Max used to be great, it used to be the best program because it was free and fully functional. But now it's complete garbage unless you actually buy the software, which I cannot do. So are there any other methods/programs any of you know of that can backup drivers?

A:Any software to backup and restore all my drivers?

Windows 7 has a Backup and Restore feature built right in.

Backup and Restore - Windows 7 features - Microsoft Windows

2 more replies
Answer Match 39.9%

HI. Three years ago i bought this PC with an OEM key for windows 8.1. Yesterday i did a clean re-install of windows and now i want to download the HP software and drivers. I downloaded it from this site finding my device but some of the softwares give me the error: "can't install, the pc hasn't the requisites". These softwares are cyberlink, intel graphics driver and hitachi driver. Before reinstalling windows these softwares were installed. How can i do? Thank you for the answers.

A:Can't install Hp software and drivers: the pc hasn't the req...

#HPExpertDayTry installing HP Support Assistant which will automatically download and install drivers/updates:HPSA Link: http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html

2 more replies
Answer Match 39.9%

Can anyone pint me in the direction for the Canon software for a Canon Pixma IP5200. I want to be able to once again print onto DVDs but cannot. I have aprint driver installed that works, but the Easy print toolbox and CD label print software from Canon won't install
Thanks

A:Canon Pixma software and drivers

I used Vista Canon drivers for mine... Running them in Vista Sp1 compatibility mode and installed as administrator... Worked for me.

3 more replies