Tech Problem Aggregator

Touch volume control doesn't work on dv6, looking for driver

Q: Touch volume control doesn't work on dv6, looking for driver

Yesterday I reinstalled Windows 7 on my notebook PC. I had to use a Microsoft installation disk because unfortunately, serious errors resulted after I installed from the HP recovery program. Consequently the HP drivers that were installed automatically with the recovery program weren't installed on my system. I had to install several of them from the HP support site. I got everything to work except for the Touch volume control, or the Volume Scroll Zone as referred to by HP in the service guide. This is the device located just above the keyboard that increases or decreases speaker volume when you drag you finger on it. I installed the Quick Launch button driver but that only applied to the mouse and pointer touchpad. I looked at the devices listed in my startup configuration. I saw the synaptics pointing device and the HP quick launch buttons listed. So is the IDT PC audio driver. What am I missing? Where I can I find it to activate the touch volume control?

A: Touch volume control doesn't work on dv6, looking for driver

@accordeoniste Try these. http://ftp.hp.com/pub/softpaq/sp48001-48500/sp48425.exe http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46731.exe REO

2 more replies
Answer Match 88.62%

I'm running Windows XP SP2 and I have all my sound drivers installed (I can get sound just fine in every app), but I can't control the main volume in the Volume Control. I can adjust the volume with the Wave slider, but the main one doesn't do anything, including mute. Individual applications' volume controls work fine too, just not the main Windows one. It wouldn't be a problem, but it might be the reason why I'm not getting any volume on the Stereo Mix recording option. I just finished a clean install of XP (for a different reason) and it wasn't working before, either. Any ideas?
 

More replies
Answer Match 88.62%

Hello

I installed windows 10 and i like it very much, except for one thing; i can't adjust my windows volume.
I had this problem before with previous windows but i could fix this to right click on the volume icon right below the the task bar and press playback devices. Here you swa to devices speakers what was set as default en digital output. nothing's change there very much but before i could fix the problem trought set the digital output device as default, but now nothing changed. I tryd to disableing the other devices i tryd to update the drivers, i cant change any thing in the driver settings what can help me.

I can adjust the volume at youtube its just the volume of windows i cant eather mute it.
i'm sorry for my bad english i hope i'm clearly enough and hope some one can help me.

Highsoldierr.

A:Windows 10 volume control doesn't work

my solution:

CTRL+ALT+DEL, restart Windows Explorer

I have this problem when my computer comes back from sleep

1 more replies
Answer Match 87.78%

Hi

Since upgrade to Windows 7 64 bit I can't turn the volume all the way down by using the volume control at the front of the notebook. Worked fine under Vista 32 bit.
The volume control still works but no matter how far I wind it to the left there is still sound coming from the speakers.

Any help appreciated.

Thanks
Warren

A:Tecra P5 - Volume control doesn’t work properly

As far as I know volume control in the past was mechanical but now it works on different way and it is controlled by specific tool/utility.
To be honest Tecra P5 is not known to me but obviously it is Australian notebook model and according to Australian support page this notebook model is not supported for Windows 7.

That doesn?t mean you cannot use it but this means there is not software package designed for Windows 7 that can be installed so I think there is no much you can do about it.

I know it is annoying but for volume control you can use Windows option placed in task bar.

2 more replies
Answer Match 86.94%

I did a scan from 317 here are the results

Results of screen317's Security Check version 0.99.89
Windows XP Service Pack 3 x86
Internet Explorer 8
``````````````Antivirus/Firewall Check:``````````````
Windows Security Center service is not running! This report may not be accurate!
AVG 2013
`````````Anti-malware/Other Utilities Check:`````````
CCleaner
Java 7 Update 71
Java version out of Date!
Adobe Flash Player 14.0.0.179 Flash Player out of Date!
Adobe Reader XI
Mozilla Firefox 32.0.3 Firefox out of Date!
````````Process Check: objlist.exe by Laurent````````
`````````````````System Health check`````````````````
Total Fragmentation on Drive C:: 2%
````````````````````End of Log``````````````````````
I clicked control panel and printers faxes. Says no driver detected, so I installed the driver. Still says no driver detected and my volume control doesn't show up . Any ideas on how to get this printer going again? I got a business to run. I use the card reader on this Epson CX6000 printer to upload photos onto this PC, and I haven't been able to for 3 weeks now........
 

A:no driver detected and my volume control doesn't show up

16 more replies
Answer Match 86.94%

I recently had to reinstall windows XP on my computer. I installed the video and audio drivers that came with the motherboard cd. There is sound and the microphone works, but I can't control the volume normally, it can be controlled as wave.

Also the mixer device appears as SiS 7012 Wave.

I already uninstalled and installed the driver several times from the CD and I downloaded it and installed it too and the problem persists.
 

A:Volume control doesn't work (SiS 2012 Wave problem)

Anyone?
 

2 more replies
Answer Match 78.96%

Hi, I had some issues with a HDD around this time last year, so I replaced it with a new western digital HDD. I wasn't able to back anything up, so I cloned it instead.

turns out I installed the incorrect driver for my video card and suffered from the BSOD syndrome....

well, I finally got that sorted out, ( I think ) and now I am trying relentlessly to get catalyst pro control center to work properly. Ive read numerous places online that involves editing the Assembly folder, but I have no such keys in there.

when I try and run CCC, it tells me that I am unable to run as I wouldn't be able to change any settings within the app basically. Ive tried uninstalling, installing. trying ATI opposed to AMD- to no anvil.


I know for a fact that I had CCC on this pc, but it almost seems impossible to get up and running, I am very desperate to get this up and running.

thanx in advance
 

A:Catalyst Control Center doesn't work after I installed the wrong driver

Hhhmmmm... let's take a look

List any Problem devices

Make sure devices are connected and powered on
Click Start->Run, enter: msinfo32. Click the + sign next to Components to expand it
Click Problem Devices. Anything appear?
If yes, click on it, Ctrl-A to select all, Ctrl-C to copy it, Ctrl-V to paste into next post
On the other hand, if no devices are listed, tell me so
Generate and attach a DirectX report

Click Start->Run, enter dxdiag and click OK
===> If you?re running 32 bit Windows, dxdiag will launch on its own
===> If you?re running 64 bit Windows, you?ll see 64-bit DxDiag. Click it to launch the 64-bit version of dxdiag
Notice progress in lower left window corner
When done, click Save Information button and save as a text file to your Desktop
Attach it to your next post by clicking the Upload a File button

 

3 more replies
Answer Match 76.02%

hi guys i have a HP dv9033cl Laptop which has these buttons above the keyboard- such as volume,rewind,pause play,stop,fast forward and mute. When im listening to something and i wanna turn it down or turn it up it takes a long time and i have to hit it multiple times but on XP i can just slide my finger across once and it will be loud fast or quiet fast i wonder if anyone knows how to change the volume scroll speed.
 

A:HP laptop touch volume control is slow

6 more replies
Answer Match 76.02%

Is there anyway I can disable the sound unmuting when i turn the volume control knob? Vista didn't do this and it's really annoying as its on the bottom so i always catch it when the laptop is on my lap.

A:Sound unmuting when I touch volume control?

Hello Adam, Welcome to the Forums!
I don't think so, at least not using native capabilities. There may be a third-party app that will do that, but frankly, I doubt it.
Sorry I could not be of more help.

2 more replies
Answer Match 74.34%

As per subject heading I am unable to use any of the touch controls to change volume, mute speaker etc. I have not been able to find a way to re-establish these functions. Does anyone have the answer?Cheers











Solved!
View Solution.

A:HP Pavilion model DV6 touch control for volume, speaker mute...

@alwend Hi,Perform a Hard Reset:1. Disconnect all peripheral devices and remove all USB devices and media cards.2. Disconnect the AC power adapter, remove the battery, and then press and hold the power button for at least 1 minute.3. Reconnect the AC power adapter (do not connect the battery), press the Power button and check is your problem solved or not.

10 more replies
Answer Match 73.08%

I can't use my Control with any other key to copy, cut, paste, or
bring up task manager.

Help please and thanks, Mary

Here is my hijackthis text file.
 

A:Control/C Control/V control/alter/delete doesn't work

Mary, keyboard problems are not invariably software or malware-related. First things first - what OS are you talking about ? XP, Win 7, Win 8 or what? What type of keyboard is it? PS2, USB or wireless?

Disconnect it and reconnect it a few times, reboot and try again. Turn the keyboard upside down, placing one end on the edge of a thick book, and thump a few times on the back with your hand. Sweep the crud onto the carpet.....

Is it just a keyboard hardware problem, and if so which keys? http://windows.microsoft.com/en-gb/windows/keyboard-shortcuts#keyboard-shortcuts=windows-7 tells you a lot of key combinations with ctrl and shift and alt. Tell us if any or none work?

Open a document and try typing a bit of text. Do all the characters work?

If it appears the keyboard is faulty, can you borrow another to test?

Quite often, keyboard problems are down to wireless problems: and can often be solved by re-installing the keyboard driver.
 

2 more replies
Answer Match 72.66%

Hello!
I have a problem. I have adjourned the bios of the pc acer aspire M1641 and when I have restarted the pc tuneup utilities it signals me this problem:

the peripheral "Nvidia port io control driver" doesn't correctly work

Do you know as solution for this?

A:"Nvidia port io control driver" doesn't correctly work

Hi,
Did you find a solution to this problem? TuneUp Utilities report on an identical problem on my win7 system

9 more replies
Answer Match 71.4%

Hello,
I recently got this problem, that my volume hotkeys stopped working, (Acer Aspire 5560G) AMD High Definition Audio. I also tryed plug in other keyboard that have's volume hotkeys but still doesn't work.

A:Volume hotkey (fn+volume+-) doesn't work

Still need help

2 more replies
Answer Match 69.72%

Touch pad doesn't work if you close and open the laptop, sometimes the touch pad turns off on it's own. I have checked the settings for the touch pad and for what the computer does when closing the lid, they are correct. Tried booting in safe mode and still had same results. The only way to get the touch pad to come back on is if you reboot the computer. Any ideas?

More replies
Answer Match 69.3%

Windows XP Home SP2.
Pretty often clicking on my sound icon (Which IS present in the system tray), does not open the volume control slider. When this happens I go to Control Panel but Sound controls won't open from that location either. There's no way to control the volume and must reboot to get it back (temporarily, because it keeps happening).

Do I possibly need driver updates? If so, which one of these is my sound card?
SoundMAX Integrated Digital Audio
Unimodem Half-Duplex Audio Device

Or is it an XP problem.
 

A:Sound icon is there but doesn't bring up volume control

6 more replies
Answer Match 68.88%

I just purchased this laptop yesterday, 9/12, and it was working perfectly fine until today. I was working on it and the touch screen stopped working so I can only use the keypad. I'm wondering if something went wrong with the laptop or if it can be easily fixed!!

More replies
Answer Match 68.88%

The touchscreen on my Yoga 260 isin't working. I first noticed this problem when the screen was acting wierdly. When you tap on your yoga a light circle appears and fades over time to mark or show where you tapped and when you swipe a trail or tail appears behind of where you swiped then disappears over time. So when I opened my Yoga these taps and swipes were appearing all over the screen ramdomly in a very rapid pace. So I restarted my Yoga and saw that the swipes and taps were still there. So I chose to restart the Yoga again and the taps and swipes dissapered. After that I noticed that the touchscreen became unresponsive but the computer runs as normal butthe screen is unresponsive. Before I discovered the problem I could remember dropped the computer a small height but caught it. If there's a solution to this problem I'm happy to listen! Thanks. 

More replies
Answer Match 68.88%

So recently my laptop Pavilion DV6xxx updated the OS to Windows 10 64 bit and for some reason the touch pad works, but the scrolling system i.e. the designated scroll bar partition doesn't scroll any more. I have the Synaptics Pointing device software and my system is up to date in drivers yet it doesn't work. Please help as not being able to scroll with the touch pad is a huge inconvenience.

More replies
Answer Match 68.88%

Hi,thanks a lot from hp companyI bought hp envy k212ne last week and I removed ubuntu and I installed windows 8.1 and I downloaded all of the drivers for my laptop from hp support .In addition before I install drivers in my laptop , I saw pen and touch in my control panel , but now it isn't there.Then I went to device manager (Human Interface Devices ) but I didn't saw HID-COMPLIANT TOUCH SCREEN ,there.So I need your help .Plz help me.

More replies
Answer Match 68.88%

hi recently my laptop has had a problem concerning a update from microsoft and has been restored to an earlier point before the update. Now my touch pad won't work so i got to connect a mouse every time i want to use it is there any reason it won't work concerning drivers or is my touch pad broken...

Thanks in advance
Xeno
P.s. its a sony vaio with vista installed intel dual core 1.67ghz
2Gb ram
120gb of hard drive space
im ussually good at fixing this kind of stuff but its my first time using vista
 

A:Laptop doesn't work with the touch pad

Did you reinstall the drivers/software?
 

1 more replies
Answer Match 68.88%

Hi,thanks a lot from hp companyI bought hp envy k212ne last week and I removed ubuntu and I installed windows 8.1 and I downloaded all of the drivers for my laptop from hp support .In addition before I install drivers in my laptop , I saw pen and touch in my control panel , but now it isn't there.Then I went to device manager (Human Interface Devices ) but I didn't saw HID-COMPLIANT TOUCH SCREEN ,there.So I need your help .Plz help me.

More replies
Answer Match 68.88%

I just purchased this laptop yesterday, 9/12, and it was working perfectly fine until today. I was working on it and the touch screen stopped working so I can only use the keypad. I'm wondering if something went wrong with the laptop or if it can be easily fixed!!

More replies
Answer Match 68.88%

Hello! I've just installed Windows 7 Professional on my HP 350 G1.  I have a problem with touch pad - it works, but just as mouse (and also installed as mouse). I've tried to update and downloaded synaptics driver, but it failed to be installed. I can't delete previous version of Synaptic driver and installed a new one, because it's not in Programmes list at all.  Windows Update doesn't work as weel, if it's relevant.

A:Synaptics touch pad doesn't work

 Hi, Install the driver from the device manufacturerhttp://drivers.synaptics.com/Synaptics_v17_0_19_C_XP32_Vista32_Win7-32_XP64_Vista64_Win7-64_Acme_Inc...

2 more replies
Answer Match 68.46%

OK i got a dell Latitude d620 intel core 2 duo Windows Xp. I have tried alot of stuff to get my volume control to work !! But all has failed.. I have Legacy audio Driver and it is enabled and working. But when i try to turn volume up in the controls it says no audio mixers found. Can anyone help. I have tried many things and all failed.

A:Volume Control not work

Also wanted to add that it is a laptop and the speakers do work cause when an error happens it does beep!! and that is the only noise it makes. No power up noises nothing from the web or anything.

3 more replies
Answer Match 68.46%

My computer is an HP a1213w. The sound randomly stopped working while watching a YouTube video. The box claims there are no mixers available. I checked to see if my sound card is working properly; it is. I was told to make sure it was on automatic and push start, and I did all that even though it was already done. The speaker icon isn't on the toolbar. iTunes and MySpace music won't play. I have Windows XP. Sorry for any mistakes. THANKS! I have now realized how much I appreciate my hearing...

A:Volume Control Won't Work

You may have a corrupt driver.
Go to the Control Panel & double click the System icon
Click on the Hardware tab
Open the device manager
uninstall the sound device
restart the unit to let it reinstall
if that doesn't work download the driver from the manufacturers web site & install it.

sorry about the lack of caps, i'm holding a slice of pizza with my left hand.

3 more replies
Answer Match 68.46%

Hi:

Just made a fresh intall of Windows 7 (32 bit). This was done from scracth with Toshiba CD. The drivers I downloaded from Toshiba website. Everything is ok, except the volume wheel it doesn't control the sound.

Does anyone know wich driver I'm missing? Every other butons and functions are active except volume wheel.

A:Portege M750 - Volume Wheel doesn't control the sound

Hi

Did you install the VAP (value added package) for Win 7?
On Toshiba EU driver page VAP v 1.2.40 can be found

15 more replies
Answer Match 68.04%

hi
i have dell inspiron n5010
i want to disable its touch pad but cant figure it out
there is a touch pad disabling button (right beside f12 key) but it doesn't work

can anyone tell me how to do it cuz it gets really irritating sometimes.

thank you in advace
 

A:Touch pad disabling button doesn't work

Touchpad problem

Hi. I don't know about a button to disable the touchpad on a laptop, but there is a free program that will do the same thing, so you can type away, and your arm won't move the cursor around. Try http://code.google.com/p/touchfreeze/
 

9 more replies
Answer Match 68.04%

Hello everybody.

I got an ASUS N50Vn aka X5AVseries..

On the top of the keyboard I got a "touch panel" where I can control the volume, change the computers performance and so on.

But after installing Windows 7 it doesn't work.

Anybody knows what to do? Maybe a speciel driver I need?

Thanks, Peter.

A:ASUS - Touch Panel doesn't work?

You have to install all the acpi/she drivers from asus's website. You can use the vista or xp drivers.

(had to do this on an 1000he from asus, but I got almost all hardware keys working)

9 more replies
Answer Match 68.04%

Hi, Please help! I updated to window 10 this evening and things seemed fine. I dowloaded a few apps and restarted the system. Whe the system came back - the cursor wouldn't leave the top of the screen - just flickering aroung the top edge. The keypad works, as do the left and right clicks and the pointing device, but I fing he pointing device imposible to use and as soon as either the touchpad is toched, or the pointing device is touched at the same time as the left and right clicks - the cursor goes straight back to the top of the screen (where the close button is) As I am sure you can understand - this is all but unworkable. I have looked to se if the driver needs updating - it doesn't. Can you help? Richard











Solved!
View Solution.

A:Updated to Windows 10, now touch pad doesn't work

I manually reinstalled a windows 7 software for synaptics (none later available) and is currently working. Will keep my fingers crossed.Thanks for your help

10 more replies
Answer Match 68.04%

Hi Guys...I'm using the Lenovo multi touch driver for my X61T. With Windows 7 build 7000 the same driver when I wake my laptop from sleep the touch screen works. Starting with build 704x (i can't remember the exact build but it was the first leaked x64 build) when I wake the machine from sleep the touch screen doesn't work (both pen and finger touch)

I have tried to change USB settings but I haven't seen any fix. A restart of the machine means the tablet works again. Any ideas about a patch until Lenovo makes new drivers for Windows 7?

A:Touch Screen doesn't work out of sleep

There is a registry patch for better USB connectivity after waking from sleep, available from Lenovo.

Lenovo Support & downloads - Registry patch to improve USB device detection on resume from sleep for Windows Vista - Notebooks

How's the touchscreen working for you? Hope it's great! I don't like touchscreens because the screen can heat up and flicking your finger around on it can really burn.

4 more replies
Answer Match 68.04%

I have just bought a Acer laptop. The model, as it says on my laptop, Aspire 4752-6838.

The problem is that my fn hotkeys do not work for raising and lowering the volume or muting or playing. That would be fn + up, fn + down, and fn + f8, respectively.

Interestingly enough, my fn hotkeys work for other functions like num lock, brightness. Im not sure about my other fn keys working, but i dont have a need for them, so i dont care. However i really want to use my fn hotkeys for volume control.

Is there any way to enable this? Or does any one know where this problem arises and a solution?

BTW i read the manual and it doesn't help me with my problem. I also tried searching google and found no help either. If anyone knows where else i can look, that would help too.
 

A:My fn hotkeys do not work for volume control

Take it back to where you bought it and have them take a look. It could be a faulty keyboard. What version of Windows are you running? Have you run Windows update till no more updates are found?
 

3 more replies
Answer Match 67.2%

i have a CGV ray liner ts Universal LCD Touch Screen Remote Control and it wont work on anything i've tried all the codes and the search through the library and nothing is working it can control six things and i only want it for my tv, set top box, and dvd player.
i hope someone knows more than is the user manual (which i read hundred times)
 

More replies
Answer Match 67.2%

I bought a windows 8 hp pavilion touchsmart and touch screen worked. I updated to Windows 10 and it worked, only after I did a factory restore did it not work. I've tried everything with the device driver and another factory restore and it still does not work. I sent my computer in to get it fixed while it was under warranty and it was still not fixed. I resigned to it not working and I think that hp should have solved this problem before selling its computers. So we are blaming it on Microsoft 10, but that is not the issue when it worked until I did a factory restore and attempted everything suggested. I have a 350 dollar piece of **bleep**. Plus now my Mic isn't working and there aren't any drivers for me to upgrade to, anywhere.

More replies
Answer Match 67.2%

Screen was cracked so I replaced the screen. Now touch doesn't work.
There is no "Pen and Touch" and "Tablet PC Settings" in Control Panel. In PC info it says, "No pen or touch input is available for this display."
Touch DOES work on LINUX as I ran it from a usb drive, so it is not a hardware problem.
I have reinstalled Windows.
I have another Yoga 2 Pro and comparing Device Manager in both I see no differences.
How can I get the touch to work again?

A:Why doesn't my Touch work after replacing the screen on my Yoga 2 Pro?

try refreshing your PC maybe the driver is not working properly
If the touchscreen does show up on the device manager try updating the driver from there. (it will be listed under HID )
​Otherwise To refresh your PC Swipe in from the right edge of the screen, tap Settings, and then tap Change PC settings.
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, click Settings, and then click Change PC settings.)Tap or click Update and recovery, and then tap or click Recovery.Under Refresh your PC without affecting your files, tap or click Get started.Follow the instructions on the screen.

3 more replies
Answer Match 67.2%

i upgraded to windows 10, and surprise surprise my touch screen is gone.   no drivers, no hint of it anywhere on my pc settings,  i tried finding a link on HP's website to redownload the software, no such luck, you would think for such a common problem hp and microsoft would get there act together and provide a patch.  Any ideas anyone. thanks

More replies
Answer Match 67.2%

I have always been a fond user of multimedia keyboard/mouse controls, particularly volume control. Unfortunately, ever since I got a new audio card (Creative SB X-Fi) in order to use digital surround sound (SPDIF DTS encoding >>> amplifier), muting still works, however, volume control doesn't change anything.

Now I am aware of all the arguments that you can't change digital output volume, however, i know this CAN be done. I have done this myself in two ways, firstly, by changing the EQ level in the Creative volume mixer, and more intruigingly, by changing Creative's "What U Hear" level in the recording tab of the control panel sound controls pane.

Ideally, I would like keyboard volume controls to adjust the "What U Hear" level, however volume control only changes the default PLAYBACK device, and "What U Hear" is a RECORDING device.

So here is my Question:

How do you configure volume controls to adjust the "What U Hear" level? Alternatively, can digital volume control be achieved in another way?

I'm sure this can be done by changing a registry key associating volume +/- and default device, but no luck so far. If anyone can help or has another method for control digital volume I would be much appreciated.

PS. I am not interested in using my amp's remote for volume so please don't suggest that.

A:Creative X-Fi digital volume control. Help, I KNOW this can work!!!

Unless you are a programmer and can create a program to do this specific task, I don't see a way around it. The S/PDIF doesn't use the sound card or at least the parts of it that can be controlled by the usual methods.

What you are hearing in the PC speakers is being generated by the PC's sound card, after the digital section so that is two different functions.

It looks like, to me, that "you can't get there from here".

4 more replies
Answer Match 67.2%

My new keyboard works, except for its volume control buttons and its l<< >ll >>l previous play/pause and next buttons. Why is this and how do I get them to work??

My keyboard is a wireless Logitech K360

A:New keyboard volume control buttons don`t work

Hi inaniloquent, Have you loaded the drivers ? Support + Downloads: Wireless Keyboard K360 - Logitech Setpoint software controls the key

5 more replies
Answer Match 67.2%

Hi, my speakers play sound but when I plug the headphones into the master speaker on the right it doesn't play audio anymore through the headphones. I tried several pair, one even brand new and no luck, however when anything is plugged in the audio stops. I tried plugging them into the back of the desktop and the front even but none of the 3.5mm audio jacks seem to want to allow Windows 7 to recognize the head phones.

My son is playing some browser game and it's driving me mad to have to listen to it in the back round and was hoping someone could help me navigate the volume control options in Windows 7 so I could fix this for myself, thank you

A:[SOLVED] Volume control options &gt; playback devices doesn't list my headphones just sp

First thing, are you sure that the jack on your speaker system works?

Next, I would advise you reinstall your sound driver.

12 more replies
Answer Match 66.78%

I have been facing this issue from the day one since I installed Windows 10 on my laptop (Dell XPS L502x).

Native Windows Applications like all browsers, office products etc. anything that is not from the Store, works fine. I can use Touch Pad scrolling with no trouble. e.g. on Internet Explorer, Chrome, MS Word, etc.

But the apps that come out of store or the apps like those which come pre-built with Windows 10 such as new Settings UI, Microsoft Edge. Touch Pad scrolling just don't work with these apps. When I perform scrolling the scroll-icon appears but doesn't scroll the content.

This issue is only with Touch Pad. External Mouse works great with scrolling on any kind of app.

Hope to find a solution here.
Thanks

PS: drivers are all good on the machine and up to date with no warning or error.

More replies
Answer Match 66.78%

Hello, My laptop is HP Pavillion DV6875se with Windows 7 OS. It was working great before a month, but all of a sudden the following issues came up1. The power button of the laptop doesn't turn on/off the laptop. I have to use a detachable remote to turn the laptop on. I don't see blue light on the power key, once the remote turns the laptop on.2. The quick play touch sensative keys above the laptop key board have blue light in most of them. But its flickering red for volume, and no indicator on the volume increase decrease touch region. Though some have blue indicator, red lights....none of the touch sensative keys function at present.3. The laptop touch pad is unresponsive. It has its blue light, which doesn't turn red even if the touch pad is locked. I use a USB mouse as of now.4. Laptop has 3 audio jacks. One for microphone, and 2 for headphone. The external speaker doesnt have any sound, so i have to plug in earphone everytime to listen anything. In control panel --> under sound --> playback ---> i see speakers and realtek digital output ---> both show green oscillating bars when an audio is played. But the volume key in quick play tab is flickering red all the time. The laptop is fully functional. But it would be great if the problems mentioned above gets fixed. Sincerely 

More replies
Answer Match 66.36%

hey!

so i was in my control panel deleting things i didn't need the other day and i might have deleted something with my volume because it doesn't work anymore! when i go into my volume control the main bar doesn't move and it shaded light gray and its not muted or anything that box is light gray too! when i click on the bar to try and scroll it the computer makes a beep. how do i fix this?? i'm in the middle of no where in Australia and will be for a while!! and i'd like to be able to use it for dvd purposes etc!

Thanks for your help!
 

A:volume control doens't work! shaded gray

In the Control Panel, click on Sound and Audio Devices Properties, then on the Hardware tab. Select your Audio device and click on Properties. In the window that opens, at the bottom, make sure the device is Enabled. If it already is, you can try updating or reinstalling your sound card driver.
 

2 more replies
Answer Match 66.36%

I have bought Inspiron I5558 signature edition 5 months back.My speakers are not working after it reaches 50 percent of volume till then they will work fine. I uninstalled and installed new audio drivers but problem is not solved. Please help....

A:Speakers doesn't work after certain volume

Hi kash2528,
I would suggest you to update BIOS and reinstall the audio driver on the Dell system. Please follow the steps mentioned below to uninstall the audio card.

In the search box, Start typing devmgmt.msc and then press enter.
Select the Sound, video and game controllers listed and expand it.
You should find Realtek High definition audio or audio controller please right click on it.
Now select properties.
In the properties window, under Driver tab, click on Uninstall button.
Check “Delete the driver software for this device.”
You want to delete the driver click OK.

After uninstallation please enter your service tag # on the link below, select the OS, then download the BIOS from BIOS section and audio driver from audio section onto the system and install it.
http://dell.to/18r60nI
Please let me know if this helps.

1 more replies
Answer Match 66.36%

Orig. tried replying in No volume control for Line In (Sigma Tel) but could not since the thread is too old.

I am aware of this new thread: Latest Realtek HD Audio Driver Version but am frankly afraid to download and install anything new from Sigmatel.

OK, enough preamble. Problem was that it seemed that "intermittently" (ie, between boot-ups) I was able to/not able to get to the Volume Mixer/Volume Control utility provided by the Sigmatel drivers and accessible via the speaker icon found in the lower-right-hand corner in Windows Explorer. [I am on a Gateway ML6228 laptop (an oldie but a goodie... well, maybe...) w/ Vista 32-bit, SP2, for anyone who cares.] Thus I could not adjust the volume from Windows Explorer, but only from my media players (which support a much-more limited range of volume as we all know).

I am guessing this is a bug/oversight on their part but this appears to be the issue: If on bootup when the S'tel drivers load they detect an output-receiving device, such as speakers or a headphone, they suppress access to the volume control. I have no idea why they might do this but that seems to be the precipitating factor. If you boot up however with any and all audio output-receiving devices disconnected from your machine, you get the familiar Volume Mixer/Volume Control utility back in the lower-right corner of Windows Explorer.

This is really dumb, but there it is. One could go nuts installing and reinstalling drivers all day to no av... Read more

More replies
Answer Match 65.52%

Hello, I have an X1 Yoga and just noticed that the volume rocker (the physical buttons on the right side of the computer) don't seem to work when my lid is closed.  When the lid is open, the rocker works great.  But not otherwise. I have tried playing music from both Spotify and Youtube.  Both sources of audio don't work.  (Not sure if that's relevant, but just thought I'd mention it.) If there are any other X1 Yoga owners out there, could you please test this out?  I normally adjust volume with the Fn keys (with the lid open, obviously) so I didn't notice this issue until today.  I was just trying to listen to music with the lid closed for the first time today when I noticed the problem. Thanks!

More replies
Answer Match 65.52%

Hello I have a Lenovo S5 Yoga 15 20DQ0038SP and suddenly volume sidebar it doesn't work. With Fn key works. Windows 10 instaled, what could be the problem? Thanks!!

More replies
Answer Match 65.1%

I have the issue that the touch screen + front camera + back camera + windows button on the screen are not working.

I tried installing the display/graphics drivers but that did not helped.

I bought this laptop from Saudi Arabia and it is still under warranty but I am out of country so i cant claim the warranty as well.

someone please sort out this issue and tell me the solution or tell me what i should do?

Help will be really appreciated.
some details about my laptop:

Toshiba Satellite U920T-B919.
windows 8.1 update 64 bit.

Thanks,

A:Satellite U920T - front/back cam + touch screen + win button doesn't work

Since you mentioned different issues with your notebook, I think that in this case its advisable to recover the notebook back to factory settings just to check if all these problems are related to system problem.

Regarding the webcam: the Windows 8 /8.1 already contains the webcam drivers and therefore additional webcam driver installation isn?t possible. Additional webcam driver does not exist simply.

From my point of few the whole description smells a little bit like a hardware problem of the upper slide part where the touchscreen is part of.
The win button as well as the both cams are located there and probably there is some lose connection between the two parts (touchscreen and keyboard)

Anyway, as I said above, its advisable to recover the notebook to factory settings just to ensure that the system isn?t the troublemaker.
In case of hardware problems, you would need to get in contact with service available in your country.

7 more replies
Answer Match 64.68%

Hi

Thanks in advance for any help
I've got a a Dell Lattitude D820 with Windows XP home.
One day, out of the blue, I started getting an error message when Windows tries to boot.
Unmountable_Boot_Volume

with some unhelpful directions, and then at the bottom,

Stop: 0X000000ED (0x864FB590, 0xC0000006, 0x00000000, 0x00000000)
I checked out some different places and the general advice was to try and boot windows from the Windows CD. After setting the BIOS and cleaning the disk, this is what happens

Blue screen with ?Windows Setup? appears and at the bottom it tells me all the little steps it's taking to get windows going. It all goes well and I get ?Setup is starting Windows?

but then I get another blue screen of doom, this one says:

Stop: 0x0000007E (0xc0000005, 0xF76130BF, 0xF7A5F208, 0xF7A5EF08)

pci.sys- Address F76130BF base at F760C000, DateStamp 3b7d855c

I'm not even sure I can reformat if the CD won't work. Ugh.

A:Unmountable Boot Volume, and Windows CD doesn't work

Are you using IDE or SATA. Did you check to be sure you are using the proper cable if you are using IDE? That could cause the first error and the second error. The second error is a driver based error. Hopefully you have a backup because there is a possibility your hard drive is dying. My suggestion...check the cabling...remove any unneeded hardware from the computer...check to make sure everything else is seated properly and try to start up. How old is the computer?

6 more replies
Answer Match 64.68%

Hello, I have an X1 Yoga and just noticed that the volume rocker (the physical buttons on the right side of the computer) don't seem to work when my lid is closed.  When the lid is open, the rocker works great.  But not otherwise. I have tried playing music from both Spotify and Youtube.  Both sources of audio don't work.  (Not sure if that's relevant, but just thought I'd mention it.) If there are any other X1 owners out there (Yoga or Carbon; I believe they're very similar), could you please test this out?  I normally adjust volume with the Fn keys (with the lid open, obviously) so I didn't notice this issue until today.  I was just trying to listen to music with the lid closed for the first time today when I noticed the problem. Thanks!

More replies
Answer Match 64.26%

most of the softwares(or what it's called) in control panel doesn't work

when i click on control panel, it works

but after that ....like add or remove, add a hardware, most of them doesn't work

why's that?? can you help me?

tyvm

A:My Control Panel Doesn't Work

What error does it give if any?
Which ones do not work?
Have you disabled any services or anything in msconfig lately?
If they were working before have you tried to do a System Restore?

3 more replies
Answer Match 64.26%

I can never get into control panel. I get an error message that looks like this:

AppName: explorer.exe AppVer: 6.0.2800.1106 ModName: unknown
ModVer: 0.0.0.0 Offset: c0002fad

and it says that they will send this directory:

C:\DOCUME~1\Allen\LOCALS~1\Temp\WER31B.tmp.dir00\appcompat.txt

I have included a HJT log that my help. THanks.

Logfile of HijackThis v1.99.1
Scan saved at 4:00:27 PM, on 4/28/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\iolo\System Mechanic 4\PopupStopper.exe
C:\Program Files\MSN Messenger\msnmsgr.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\WINDOWS\System32\wuauclt.exe
C:\WINDOWS\explorer.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE
C:\Documents and Settings\Allen\Local Settings\Temporary Internet Files\Content.IE5\4HCR0RO3\hijackthis[1]\HijackThis.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.buccaneers.com/
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Local Page =
R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName =
O3 - Toolbar: &Radio - {8E718888-423F-11D2-876E-00A... Read more

A:Please help me out, control panel doesn't work, HJT log, etc.

10 more replies
Answer Match 64.26%

When I try to use the C-A-D command nothing shows up. I have tried right clicking the task bar and then clicking task manager but that doesn't work either. It opens in safe mode but not in regular startup. I have also tried opening regedit but i get an error that says: " C:\WINDOWS/system32\regedit.com The NTVDM CPU has encountered an illegal instruction. CS: 0ddc IP: 00b7 OP:65 63 69 66 79 Choose 'Close' to terminate the application. I have attached the hijack this log. let me know if there is any thing that shouldn't be here. thanks.

Logfile of HijackThis v1.99.1
Scan saved at 8:40:11 PM, on 09/11/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\SYSTEM32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Analog Devices\SoundMAX\Smtray.exe
C:\Program Files\Intel\NCS\PROSet\PRONoMgr.exe
C:\Program Files\Logitech\iTouch\iTouch.exe
C:\Program Files\Intel\Intel(R) Active Monitor\imontray.exe
C:\Program Files\Java\jre1.5.0_02\bin\jusched.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\DIGStream\digstream.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\Program Files\winupdates\winupdates.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\system3... Read more

A:Control-Alt-Delete doesn't work

Hi and Welcome
It may help you if you print out or copy this page for easy reference.. Make sure to work through the fixes in the exact order its listed..These instructions only apply to HJT v1.99.1

Please Keep your browser and all open programs closed (except firewalls and antivirus) when you are carrying out the fixes..

Download any of the required programs before attempting to start any of the fixes.

Please do NOT run Hijack This in a TEMPorary folder or on the Desktop. I recommend c:/program files/HJT/

Turn off System Restore instructions (WinXP)
Rightclick My Computer | Properties | System Restore | check ?Turn off System Restore?, <Apply>, <OK>. Reboot. When we have confirmed that your log file is clean, you may renable System Restore and create a new restore point.

SHOW HIDDEN FILES AND FOLDERS.
To show hidden files instructions (WinXP)
Doubleclick My Computer | Tools | Folder Options | View tab
Select Show Hidden Files and Folders
Uncheck Hide extensions for known file types
Uncheck Hide protected operating system files (Recommended)
Select Apply to All Folders | Yes | Apply | OK
------------------------------------------------------------------

If you hav'nt already done so,download and run Adaware,SpyBot (check for updates) for a preliminary cleanup first.Some files below may not be present after running the above programs.Full instructions below.

How to setup Ad-Aware

Download Ad-Aware
Save aawsepersonal.exe into ... Read more

1 more replies
Answer Match 64.26%

i have my hp dv2415nr with windows 7 but my hp control doesn,t work how can i install my control any ideas?? i have my wireless assistant on wath else can i do to make it work?
 

A:hp dv2415nr control doesn,t work help

HP tends to supply installation instructions for their products--both on paper and on their web site.

Mind explaining what your "hp control" is?
 

1 more replies
Answer Match 64.26%

Hello i have strange problem, my hp remote not work on windows 7. After 2 years i preinstall from vista home preimum to win7 ultimate. My laptop is hp pavilion dv7-1023cl
and i have all windows 7 x64 drivers, and all hp services running on automatic mode, HID also. I try many many times to set up IR to receive signal from remote, but i no have success. This is information from back side on remote:
RC1762307/01
3139 228 53391
HP SPS: 464793-001
HP: HSTNN-PRO7

P.S: I hope to help if it is possible that this problem be solved.

A:Remote Control Doesn't Work in Win-7

ok i think you possibly need the drivers for your remote, after a long search i came up with this,

HP Support & Drivers | United States

select the detect your product and it will scan your machine and tell you what drivers and software are available ,

9 more replies
Answer Match 63.84%

You can perform the steps mentioned on the following link.

http://support.microsoft.com/kb/319095

OR

If you do not have the Windows XP retail CDs you can Download Sndvol32.exe from the below mentioned link and place it in C:\Windows\System32 folder.

http://www.relaxingsoftware.com/sndvol32.exe

 

A:Windows cannot display the volume control on the taskbar because the Volume Control p

Thanks For The Info arjunaj

Welcome To TSG ...
 

1 more replies
Answer Match 63.84%

I'm running Microsoft professional, Internet Explorer and have a Google toolbar.

All attempts to add software are blocked and the add remove feature in the control panel won't open. For example, I can't update my old version of Itunes because the popup for the update gets blocked. I know about the popup blocker in the Google toolbar, and how to handle that, that isn't the problem. In Internet Options, the security setting is at medium and under the advanced tab I reset all options to default.

A:Add Remove In Control Panel Doesn't Work

What version of IE are you using?

What other security programs do you have on the computer? It's possible that one of them is blocking the pop-ups.

Orange Blossom

7 more replies
Answer Match 63.84%

I clicked on "Turn parental control on and deny computers access to ONLY these sites", entered the website url in the box, ticked it and set the schedule to always. But when I try to access the blocked web page it takes a little longer than usual but then loads on the website normally.

The two sites entered in the boxes are the ones I've tried to test the feature with, but both are not being blocked.

Can someone see anything I've done wrong?

I have tried emptying the cache and rebooting the computer and router, but still the pages just refuse to be blocked.

What's happening??? Advice would be appreciated.
 

A:Why doesn't my dir-300 router's parental control work?

hum; did you try just the domain name without the http:// ?
also try without the trailing / after the domain name
 

6 more replies
Answer Match 63.84%

Not sure if ths belongs here or in the security thread??

I could swear I've seen similar problems on this forum, but I did a search and didn't come up with anything.

3Ghz Pentium 4 512 MB of RAM running XP Pro. Last night a user on this PC installed MS updates, by logging off via the "install updates and shut down" option. When she came in this morning, the PC didn't respond to control + alt + delete. She asked me for help in logging on. I clicked on the help link in the control alt delet prompt, and the password prompt came up!?

The MS update button(at the bottom right corner of the screen - not sure what this is called) on her login still had the exclamation point on it, so I clicked on it to install the updates again. It installed and prompted for a restart. So I clicked on the restart now option. Nothing happened. I went to Start->shutdown, and nothing happened. I hit control alt delete, and nothing happened.

Ran spyware checks via spybot and ad-aware and they only turned up cookies. I am in the process of running a virus check right now.

My userid on the same computer has no problems. When I hit control alt delete, I get the standard prompt.
 

A:Solved: Control Alt Delete Doesn't Work

8 more replies
Answer Match 63.84%

Well I dont know what caused this but I can open the control panel but when I click on something eg. "uninstall a program" or "change the theme" there comes a message saying windows explorer has stopped working, thus restarting explorer.exe

I'm running windows 7 professional 32 bit.

Edit: it also crashes when I reopen the control panel when the control panel is already open.

More replies
Answer Match 63.42%

Hi everybody,

as described I use a Logitech G510 keyboard with multimedia keys and the posibility to insert a headset into it (the keyboard got its own soundcard). The keyboard also got a volume wheel which worked with Vista like it should: I could controle the speaker's volume by the keyboard.

Now with Win 7 I can't use the wheel anymore, even with the latest drivers. Does anyone know this problem?

My system:
OS Win 7 professional 32 bit
Intel core duo E4500 2,2 GHz; 2GB RAM
Sapphire HD5770 graphiccard
Best regards from Germany!

A:Logitech G510 keyboard's volume controle wheel doesn't work...

I found the answer in this thread! Sorry for opening this thread...

keyboard volume controls wont work

2 more replies
Answer Match 63%

I try to make changes in my internet connections but they never seem to take. I have noticed that the apply button is not in bold letters and I am unable to click on it when I make any changes. Does anyone know what is the cause of this and how I can correct it?

A:Apply Button In Control Panel Doesn't Work

What programme are you using apply to?
Can you provide a path so someone can look at the panel?
Cheers,
John

2 more replies
Answer Match 63%

When I click on My Computer either on Desktop or in the Start menu folder, a screen appears as shown here. But I can access these items from the Windows explorer icon on the task bar!!
Also whenever I click on any folder or drive in My computer window, the contents open in a new window and I end up in a large number of windows opened by the time I reach a file or a folder.
How can I fix this?

A:My computer and Control panel icons doesn't work?

Welcome to Windows Seven Forums.

Sounds like you may have a virus.

If you can, boot into Safe Mode with Networking and run a full virus scan.

Malwarebytes is an excellent choice for this job and you can download it here: Malwarebytes : Free anti-malware, anti-virus and spyware removal download

1 more replies
Answer Match 63%

Hi,
I recently noticed that my ctrl+a doesn't work. All the other ctrl combinations do! Ctrl+a doesnt allow me to "select all" while word processing or use this combination in games (first person shooters).

I have a logitech G15 and other keyboards and they all dont allow me to use ctrl+a. I have tried different versions of keyboard drivers for my G15 and without. I plugged the keyboard into another W7 and it works

Im assuming this is an issue with my OS now.

I know reinstalling windows is a option but want that to be the last resort as i only reformatted last month(i think it only started occurring when i reformatted)

EDIT: I have fixed my issue - it turns out my user account was corrupted, so I had to make a new one and copy all my documents folder over!

A:Control A combination doesn't work (Games and select all)

Hi richyo and welcome to Seven Forums.

Glad it is fixed for you. If you computer is corrupt maybe you should run the sfc /scannow command here is how: SFC /SCANNOW Command - System File Checker

2 more replies
Answer Match 63%

So i was trying to make some room on y C drive and i guess i deleted some files that i shouldnt...To make a long story short now my volume control thingy that stays on my taskbar has dissapeared.When i go to the control panel and to sounds and audio devices and i get in there and there is an icon with the option to place volume icon on the taskbar but when i click on that i get 'windows cannot display the volume control on the task bar because the volume control program has not been installed...After several tries i figured i deleted the windows file soundvol32.exe
but how the hell do i get it back and put it in its right place???I have no idea where it would go??Anybody have an idea how i can install that back????I tried using my windows cd but since i put service pack 2 on it it said that the version of windows i had on the cd was older than my current version...Any help would be GREATLY appreciated.
Thanks in advance
 

A:Solved: Volume Control computer "windows cannot display the volume control on the task bar"

12 more replies
Answer Match 62.16%

How can I get the Windows 7 Control Panel Backup & Restore link to work? When I click on it it does nothing

A:Control Panel Backup & Restore link doesn't work

Have you run
SFC /SCANNOW Command - System File Checker
lately?
Either there is a problem in the windows file structure which sfc will check for, or a service the feature depends on has been disabled.
That's about the only two scenarios I can come up with.

3 more replies
Answer Match 62.16%

hi ,
i was trying to fix one of my friends old computer. On that all of a sudden sound stopped working. sound files seems to be playing ,but no output comes through speakers or headphones.
I have done all the basic tests, and evrythng is fine. When i checked in control panel ->sound and audio->voeme tab , device volume ans speaker settings i can't use, it appears like disabled.
Pls note the audio drivers(realtek alc650) are properly installed. I have spent more than a day downloading and reinstalling the drivers and googling to find out the issue. But still in vain. Now i want to try reinstalling XP, but my disks r missing , so i need to give a try in this forum. Pls help.
 

A:Sound doesn't work (Realtek ac650) and control panel

Look in device manager if the sound device is enabled. If you don't see it, you might need to enable it in bios.
 

5 more replies
Answer Match 62.16%

Hi,
Occasionally, when resume from hibernation/suspend, display brightness control doesn't work. Means that Fn + F2,F3 doesn't work, change from Windows Power Options doesn't work, change from intel graphic doesn't work.
Anyone know if I have to restart some services to get it working? It's occasional and I can't find anything exact in EventLog.
My system is HP Probook 4230s with Core i5-2410 with intel HD3000. Latest patches on both Win 7 Pro 32-bit and intel driver.
Restart machines solve the problem, re-hibernate or re-suspend machine occasionally solve the problem, but mostly not.

A:LCD Brightness control doesn't work after resume from sleep/hibernatio

See if HP have an update for their firmware or function key control drivers. I know its a new pc, but its worth a shot.

2 more replies
Answer Match 62.16%

I just spent the last 30 hours downloading and installing all the update for 8.1 on my new Acer Laptop. Now the system will not shut down, update will not open and restore does not work. Also the sound system does not work. I've tried the recovery options but all I get is unending aero. Shutdown produces background apps still running and will only work if I physically turn off the power.

I'm at a loss to know what to do next. I did not expect to have these problems with a brand new system and by following all the proper procedures for updating.

More replies
Answer Match 62.16%

I am hoping someone on this forum can help me. I have a Thinkpad X60s, about a year old and I am running XP. Randomly my computer becomes sluggish so I try closing programs. I then figure out that one program is frozen (come to think of it, that program may always be IE) and I can't close it. I then try to warm boot with ALT CONTROL DELETE but it doesn't work. In fact, instead of getting the task manager, my screen saver comes up without any icons on my desktop. I have no cursor and can't do anything but unplug or take out battery and manually crash the computer. It then will start normally though it takes longer for the icons to appear.

I regularly download both IBM and Windows updates, I defrag regularly, do virus scans etc using Norton 360. I also have run Think Pad Productivity Center maintenance tasks.

Other than that and the slugglishness the computer runs ok.

Any help out there? I am frustrated and IBM has not been able to help, except by telling me to change the hard drive or send it to them.
 

A:Freeze,alt control delete doesn't work, lose all icons

Yes I think this is a hard drive issue too. Check to see how much space you have left on it. Go to My computer and right-click on the C drive icon. Click Properties... Also, you might consider checking the hard drive with a utility like Seatools from Seagate. IBM notebook drives are noted for their high failure rates...

Back up your important data please, ASAP

Good luck
 

1 more replies
Answer Match 62.16%

When I click on "Back up your computer" in Control Panel->System and Security, I get a gui that says "Back up or restore your files" at the top and nothing else. The rest of the window is blank. No "Turn off schedule",
"Create a system image" or "Create a system repair disc" on the left. I've tried a reboot. This is on Windows 7 Pro Service pack 1 (32 bit - 4gb ram). I've been using the backup method for several years. All of a sudden - poof.

More replies
Answer Match 61.74%

Hello, I have a problem with connecting my SE K700i cell phone with Windows 7 notebook via bluetooth. I have paired them, file transfer is available, the problem is remote control (HID profile) - when trying to connect either desktop, presenter, kmplayer or any other, it always shows "Bluetooth connection failed. Retry?" I do not know what to do with that, with Vista it worked properly, the driver is the same, so what is the problem? Would be happy, if you could help me.

edit: the problem is in Windows - remote control does not work neither with another cell phone. It has Bluetooth Stack for Windows by Toshiba.

A:BT problem: Win7~cell phone-remote control doesn't work

Thx, I have already solved that - In BT settings an option of creating HID was hidden, it offered just dial up networking.

2 more replies
Answer Match 60.9%

If I try to use the Ctrl-Click action on web pages that allow you to select multiple items in a list box, a new ie session opens (to my home page) instead of allowing me to make multiple selections. This happens with ALL web pages that have multiple select boxes. It only happens on my desktop (XP with i.e 7), and not on other computers in my house with ie7.
- I tried disabling ALL active X controls and add-ins. Still didn't work.
Any ideas please? (It's maddening!!)

A:Control-Click doesn't work with multiple select lists-it opens a new ie page instead

One thing you may want to check is the control panel/accessibility options and make sure nothing is checked in there. Sometimes the accessibility settings for the keyboard will play havoc with what you think should be happening with keys.

6 more replies
Answer Match 59.64%

I recently bought a C.D. and wanted to upload it to iTunes and put it on my iPod, but it would not load. I thought, "Oh, it must have a security thing." So I tried it in a C.D. player. It worked. I tried once more with the computer, and it failed. The driver shows up. But there is no C.D. I even tried another C.D. to see if it was just the one I had bought, but it wasn't. Any ideas?

A:My CD Driver doesn't want to work.

Hi lol_alex_lol30 and welcome to TSF

I can help you with some basics, but you will need to check further to get all the data you need, as I don't upload to iTunes.

I'm assuming you bought an audio CD. I'm also assuming that iTunes would like to see MP3 audio files....You will need to find that out. This though, is true. When you burn an audio CD from music files, those files are most likely in the form of WAV on your harddrive. They are burned onto the CD with a .cda extension and are named track 1, track 2, etc. The song names are not shown on the CD if you view it with Windows Explorer.

Extracting songs from an audio CD to harddrive is called ripping the song. Songs end up on your harddrive in the form of "songname.wav". songname will be Track1, Track2, etc. and you will have to rename each to have the actual song title associated with the song. WAV files are quite large and about 24 songs is the maxium that you can burn onto an audio CD.

Mpeg level 3 (MP3) is a compression specification that can be used to make much smaller audio files. A 20,000,000 (20 meg) WAV file will compress into a MP3 file that is about 2 meg or less. A file that is 10 to 11 times smaller than the WAV file. I'm sure you can appreciate the fact that small files upload much faster than very large ones. Also you can put about 240 mp3 files on a CD, but only about 24 wav files. You could also appreciate that your ear can't tell the difference between the sound of... Read more

4 more replies
Answer Match 59.64%

The ultra-sensitivity of my Dell laptop trackpad has driven me mad. How to reduce the sensitivity. I read forum advice that said go to control panel,mouse, and there will be a trak pad sensitivity adjustment. But..there was no adjustments for track pad on the mouse section. anyone know where it is??

Thank you!

More replies
Answer Match 59.22%

Dear Sir,
yesterday I installed windows 7 home premium x64
Before installing nvidia driver it runs well with windows default video performace (800x600).
But after installing nvidia driver, it doesn't work perfectly
MY problems after installing nvidia driver
1. It runs well before showing the start up window (welcome window where I have to entry my password)
2. But when I run the windows in safe mode it works perfectly
3. You can say that it is for driver problem / driver software problem. But I used the driver in the previous windows 7 home premium x64
If you need anything related with my problem, then comment in down
Thanks.

A:Doesn't work video driver

Hi rx123yz. Your issue sounds like that Windows have installed its own drivers over new ones that you installed. Remove all the old drivers and use Driver Sweeper. This little software removes all the bits of the old drivers. Below is the link to download the S/W. Before uninstalling the old drivers, download the latest drivers for your card from Sevenforums or from Nvidia site and install them after uninstalling and sweeping off the old drivers with driver sweeper.

Driver Sweeper Download

Keep us posted.

3 more replies
Answer Match 59.22%

hello

please anyone know how to make this driver work under windows-7 64-bit or vista>

it works fine under 32-bit>

i think it's easy to edit this driver to work under 64-bit or maybe there is another solution that i don't know>

thanks in advance>

A:Psx Driver for ps controller doesn't work

Hello TheEvil

You might want to checkout the Windows 7 Forums for all things Windows 7

Peace

1 more replies
Answer Match 59.22%

Hello,

In Windows 7, I am trying to figure out if I have any faulty drivers. I have been having BSODs for a while, and I've removed RAM etc. So the next step was to test drivers.

But I can't run Driver Verifier. No matter which drivers I select, the Driver Verifier causes a blue screen as the windows 7 logo starts to come together. I have to clear the settings in Safe mode to get it back.

Is there any way to fix this, or any other way to check my drivers?

(My most recent BSODs have said caused by dxgmms1.sys and tcpip.sys -- lots of IRQL_not_less_or_equal and system_thread_exception_not_handled.)

A:Driver Verifier Doesn't Work...

The purpose of Driver Verifier is to cause a Blue Screen of Death.
Analysis of the memory dump files will then (if it's worked) let the analyst know what driver caused it.

You'll know this because there will be a Driver Verifier Enabled memory dump.

FWIW - I had a system at work today that would spit out the IRQL error messages, but not the Driver Verifier Enabled error messages. I finally enabled all settings in Driver Verifier and then rebooted. An hour and a half later the system was still booting with the Windows 7 splash screen.

The point here is that the settings that you use in Driver Verifier are critical - and are determined by the type of BSOD events you are getting (for example, if you have BAD_POOL_CALLER errors, then you want to enable the POOL checking options in Driver Verifier).

Please zip up the contents of the C:\Windows\Minidump directory and upload/attach the .zip file to your next post.

19 more replies
Answer Match 59.22%

Every time I start up the computer, my video card stops working. When I look in Device Manager, it shows the video card there, but with an exclamation mark by it which means it's in a 'problem state'. I can fix it by reinstalling the driver, but I have to do this every time I turn it on! How do I make it work every time?
 

A:Driver doesn't work on startup???

8 more replies
Answer Match 59.22%

Hi,
I?ve got some problem with my W-LAN device. Recently I?ve got a strange feeling about it because some things didn?t work correctly, so I decided to reinstall the driver. It didn?t work directly (I don?t know why), so I tried to uninstall it first, to install it again. Now I got this message:

This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

An update for the latest driver was useless because I already got the latest one. I tried both installing it from the device manager several times, which failed everytime with this message to come, and by the driver setup (there is a folder available on my computer with all drivers installed on it), which seemed not to have any effect, although it said "Installation complete". Has anyone a solution for me?
I?m going to reinstall my Windows soon, but it?ll take some weeks to that. But until that, I need my W-LAN to work again!
I?ve got Win 7 Home Premium 32bit, my W-LAN device is a Broadcom 802.11g, my notebook is a Lenovo G550.

Thanks for any help, Bennington

A:Reinstallation of W-LAN driver doesn't work

First go into Device Manager (right click on Computer and choose properties, then Device Manager), then go ahead and delete the Broadcom device under Network adapters. Then try and install only the most recent Lenovo supplied driver for your laptop model. Let us know how that goes...

6 more replies
Answer Match 58.38%

Hello. I have Radeon HD 3850 AGP and Win7, and I tried to do almost everything ...
I installed 9.12 drivers, 9.12 drivers with adding CL_91526 from the topic above), 9.11 drivers, 9.11 drivers with Hotfix (ATI), 9.11 drivers with adding CL_91526, manual driver install by right click . Absolutely no changes and everytime the same ... During and after installing (before reboot) no changes in Device Manager, having "ATI Radeon 3850 " (or "ATI Radeon 3800 series" or something like that...) with yellow triangle and Microsoft Co. driver. And after reboot no changes with it, an error message with something like "Driver didn't install correctly, please install proper driver" ( though in ATI install log you can see that everything was installed succesfully). So after reboot I still see my VGA like "ATI Radeon 3800 series" with Microsoft driver and of course no changes in monitor resolution and all. If I try to delete microsoft driver (and device), and then install radeon drivers , during installation I absolutely just don't have any VGA in Device manager. And after reboot Win7 "finds" VGA and install from internet microsoft driver, so I can see "ATI Radeon HD 3850 (Microsoft Corporation WDDM 1.1)" in Device Manager.

I think that radeon drivers don't install (or don't install correctly), and Win7 ignores (or doesn't see) them.

Please help... Maybe I do something wrong ?...

(Asus P4S8X motherboard (latest bios), P4... Read more

A:Radeon HD 3850 AGP, driver doesn't work.

Welcome to seven forums AngieM: Unfortunately you have a pretty old system a socket 478 board I would suggest first off to use 32 git seven and try the method in this thread to try and get your driver to install. Not every systems hardware is up to running windows seven Install AGP Drivers for HD 3850, 3650, 2400 PRO This is the only method I know of that will install the agp driver, Are you sure you are following the directions EXACTLY the way they are written and installing form device manager? If so then it is possible your system may just be to outdated to run win 7 Sorry to tell you but?. Fabe I wanted to add you might want to uninstall the driver then use driver sweeper to make sure all remnants of the previous driver are removerd before trying again http://www.guru3d.com/category/driversweeper/

9 more replies
Answer Match 58.38%

Hey guys,

Yesterday I formatted and reinstalled windows Vista on my new Dell Inspiron 1720 laptop. I've gone through the whole driver CD, installed everything there, but wireless still doesn't work! It doesn't find any networks. I realize that the drivers CD just has the default 1720 drivers, so some things might be different (for example, the default video card is 8400, but mine has an 8600, and the driver for that isn't on the CD). Perhaps I require a different wireless driver?

If that is the case, how do I know which one I have and where to get the propoer driver for it?

Any help is appreciated!

Thank you.
 

A:Solved: Wireless Doesn't Work! What driver do I need?

http://support.dell.com/support/dow...D=INS_PNT_PM_1720&os=WLH&osl=en&catid=&impid=
 

3 more replies
Answer Match 57.96%

Sorry if I am posting in the wrong forum, I'm not sure if this should be in graphics cards or drivers...or somewhere else entirely.

I have an Intel 845GL Chipset....I can't find a driver to make it work using Vista.

Do I have to buy a new graphic card? Or am I missing something easy, or is there a work around?

A:Work around? Intel doesn't supply a vista driver.

Ok, I am resolved to replacing my video card.

I've never replaced a video card before, but I've upgraded memory, installed a hard drive and a modem before...is replacing a video card more complicated than that?

And, where should I start in determining what is compatible for my system/Vista etc?

9 more replies
Answer Match 57.96%

HP Deskjet 610CL driver doesn't work with Vista. HP Support in Bombay, India says "You should buy a new printer."
Printer still works great with windows 2000.

So should I remove Vista & install Windows 2000 on my PC or is the a driver somewhere that will fix the problem? Don't tell me to go to HP website. BTDT, it teels me that the driver is already installed on Vista. That's the one that doesn't work.

Anybody know ANYTHING about this problem?
 

A:Deskjet 610CL driver doesn't work with Vista

12 more replies
Answer Match 57.96%

Hi there!
I just got my new Asus Vivobook s400ca running Win8.1, a few weeks ago.
It really runs great, although I managed to find one problem. Since this is a laptop without a detachable screen,
I didn't really find any good reason for having the touch keyboard toolbar () in my task bar, since I was pretty sure I'd never need it. So I disabled the keyboard, which worked out fine but the toolbar was still there.

I then went on to try to remove it by using one of EightForum's .reg files for that purpose.

This did, as described, remove the toolbar, but apparantly it stopped the mouse pad driver as well, even though the mouse pad itself basically works. (no gestures or scrolling though.)

As you can see here, There's no driver running.


And in the ASUS hub, it's also impossible to turn it on. It just keeps saying it's off.

So I decided to use another .reg file that I found with the initial one, that should basically just rollback the effect that the other one had, but to no avail.

It just made the toolbar come back.
So I don't really know where to go from here. Any suggestions?
Also, if there is anyone who knows what to do about that toolbar, please do tell! [:

Thanks in advance! [:

More replies
Answer Match 57.96%

My boss bought a new HP tower after our old one ran out of space. I plugged it in and everything worked until I realised the scanner didn't work. I downloaded a driver but it still didnt activate the scanner. So I looked at the driver repair discs that came with the tower. I installed that thinking it would repair the scanner driver and when I logged back in, the keyboard or mouse USB didnt work. I hope I didn't screw up anything. The keyboard works in BIOS. My boss doesn't know and I would like to get this repaired without bringing anyone in. HELP! Im on Windows 7.

More replies
Answer Match 57.96%

The Stylus Pro 7600 is now a really old printer, the last supported driver was for XP but it worked in Windows 7 and I believe to some extent in 8 although I never did try it.

It s a really good reliable large format printer though and very affordable in parts, ink and the second-hand purchase price.

However alas Windows 10 doesn't like it, I did the upgrade to 10 (and then the downgrade) from windows 7 but it will not see the driver it sees the device but calls it a USB high speed device or something like that and compatibility mode didn't seem to help.

So unless there is a clever work around and I'd love that to happen I'm stuck on Windows 7 for the duration.

Suggestions welcome.

A:Epson Stylus pro 7600 - Driver doesn't work

No cleverness here, and I don't have such a printer, but...

Have you tried the drivers for Vista?

Epson Stylus Pro 7600 - Photographic Dye Ink, Drivers & Downloads - Technical Support - Epson America, Inc.

These are for the dye-based version. I didn't look to see whether the Ultrachrome based one uses different drivers.

(There are also 32 bit Windows.) If they don't want to install, you could try right clicking on the installer and running the Troubleshoot Compatibility tool.

Good luck.

3 more replies
Answer Match 57.54%

For some reason the onscreen display for the volume controls and screen brightness on my W530 stop working after coming back from sleep or resume. I updated Power Management, Hotkey and Interface but the problem still rears its ugly head. If I go into screen resolution and advanced and on screen then uncheck Enable onscreen and recheck it...the controls work again.

A:Volume control buttons do not display volume level...

try to reinstall the OSD software. Uninstall the current OSD software that you have, and download the latest version from below.
 
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS000949
 
Edit note: Wrong link. See below for the correct link.

5 more replies
Answer Match 57.54%

ok so this problem was just about from the beginning. i thought i would be patient and it would go away. at first i noticed that while using msn messenger, its volume control for voice chat controled the main volume for the whole pc. so if it was low things wouldnt sound as high as i wanted. no matter if i adjusted the main volume in the control panel, which was always set to highest, the volume would still be at the mercy of Msn M. so if it was lower than usual i would have to sign into msn m and adjust it. not only does this happen with msn m. it also happens with web video applications used by youtube, livevideo, etc etc! those arent usually the culprit of low sound. its usually just msn m. even now with live messenger i have the issue. im tired of being patient so here i am

windows xp sp2
1.8ghz
2gig ram.
anything else? sound card? the sound card came with the mobo. its a Realtek AC'97.
thanks for any help.
 

A:Other volume bars control the main volume of windows xp

trying to keep it alice bump~
 

1 more replies
Answer Match 57.54%

Hello,I am desperate for help. My laptop will turn on. And I can type in my password. But then when the computer loads it takes a very long time and when it gets to the desktop the keyboard, the mouse, the touchpad, and the touch screen won't work. I can see everything on my desktop. But I cannot open anything or do anything at all. How can I fix this?Thank you!!!

More replies
Answer Match 57.12%

Haven't updated your laptop's trackpad driver lately? Then you may well want to consider doing so, at least if your laptop is equipped with a Synaptics trackpad. As a user on the Hardware Zone forums discovered, the latest Synaptics driver seems to enable multitouch gestures on older laptops that didn't previously support them, including two-finger scrolling, and three-finger click. What's more, while the drivers themselves come from HP, they should work just fine on other laptops with a Synaptics trackpad. Hit up the link below to try it out for yourself.
Source: Synaptics driver enables multitouch gestures on older trackpads -- Engadget

p.s. working on my P7805u perfectly.

Download directly from HP:ftp://ftp.hp.com/pub/softpaq/sp47501-48000/sp47815.exe

A:Touchpad Driver that Unlocks Multi-Touch on older Touch

Thanks for posting this Martee I'm sure it will be of use to other members. Just one question am I the only one that can't get the download link to work? Fabe

3 more replies
Answer Match 57.12%

I'm trying to add a Canon imageCLASS MF7470 printer to my laptop. When I plug it into the USB, Windows 7 detects it, but as unspecified. It says no driver is installed. When I do a Windows update it comes up with other imageCLASS models but not the one I have. I've tried going thru these threads to locate my options but nothing works. When I go to add printer, properties is as far as I can go cause the only tabs I get there are general and hardware. This is a work printer for a jobsite, so of course the disk has been lost at some point, but I need this running ASAP.

A:Add a Canon printer with no driver and Windows update doesn't work

Here is the driver page for Canon, just specify your OS, download drivers, install and go at it could be that MS just doesn't provide them. However Canon does for both 32 and 64 bit.

Canon imageCLASS MF7470

1 more replies
Answer Match 57.12%

Ok, so I've re-installed Windows XP (SP2) and after it booted up, I noticed that my onboard ethernet adapter wasn't recognised. So I went and downloaded the appropriate drivers (SiS900.zip) from the mobo's official site (it's a PCChips M848A mobo) but when I try to install the drivers, it still says that the hardware isn't functional (Code 1).

I've tried many different versions of SiS900 drivers but it simply won't work.

When I tried the setup.exe file that came with the official driver, the install would say "Update Driver for PnP Device Fail. Setup will exit".

That's when I simply forwarded the windows hardware installer to an XP folder i found in the zip file. But still, it doesn't work.

I really need help on this matter. Thanks in advance...

EDIT: Maybe it's worth mentioning that I re-installed WinXP over an existing windows partition without formatting it. I simply deleted the former windows installation files.

A:[SOLVED] On-board Ethernet Adapter Driver Doesn't Work

Have you tried directing the driver to install from SiS900\WinXP\netoem.inf ?

Go into your device manager, right click the device under network adapters and click update driver. From there direct it to the aforementioned file.

6 more replies