Tech Problem Aggregator

pavilion dv9600 start screen blank if screen not fully open,...

Q: pavilion dv9600 start screen blank if screen not fully open,...

pavilion dv9600 entertainment start screen blank if screen not fully open, external screen fine and shows login infoif fully open all is fine, after login screen to the pc it can be partially closed or pulled back and will operate in the window environment perfectly

A: pavilion dv9600 start screen blank if screen not fully open,...

Hi @reneC, Good day! Thanks for posting your question in the HP Community. It is a terrific place to find answers and tips and to have the best experience in the HP forums. I read the post regarding issues with the display which works at a specific angle. I?ll be glad to assist you with this. You are a valued HP customer and we appreciate you greatly for doing business with HP. I have reviewed the situation and it is paramount that we address your issue. Thank you for giving us the privilege to assist you on this platform. You?ve done some awesome diagnosis and troubleshooting. Kudos to you on that score. . I would require more information regarding this to assist you better.· When did this first occur?· Please provide the complete model# of the unit.As this is an older computer, service options with HP may not be available as the parts for this unit is not supplied anymore by our business partners. I request you to contact a technician locally, like Best Buy or Staples and get the situation corrected. Hope this helps. Let me know how this goes. I genuinely hope the issue gets resolved without hassles and the unit works great. Please reach out for any issues and I'll be there to assist you. To simply say thanks, please click the "Thumbs Up" button to give me a Kudos to appreciate my efforts to help. If this helps, please mark this as ?Accepted Solution? as it will help several others with the same issue to get it resolved without hassles. Take care now and have a splendid week ahead.

3 more replies
Answer Match 105%

pavilion dv6000 start screen blank if screen not fully open, external screen fine and shows login infoif fully open all is fine, after login screen it can be partially  closed  or pulled back and will operate 

More replies
Answer Match 79.8%

I have an Acer AspireOne D150-1322. When the netbook is open less than 45 degrees I can view and work on the computer, but if I open it greater than that the screen starts flashing Grey, White, Red, Green, Blue, and other colors like it's during a screen test.

When I lower the screen to less than 45 degrees it is ok again. If I connect an external monitor to it, the display on the external monitor is fine if I open the netbook all the way, but still flashes different colors on the netbook.

Anyone seen this before?

Thanks.
 

A:Netbook Screen Not Working When Fully Open

My initial thoughts would be a dodgy connection somewhere. How old is the machine, is it still under warranty at all?

If not, you could always take the screen casing off and check the connections to the screen / inverter board. They are normally just plug in type cables and may have become loose.
 

1 more replies
Answer Match 78.54%

Read Replies Read Related

HP Pavilion G6 shows Black Screen on start up; have tried all the HP recommended work-arounds to no avail.

A:HP Pavilion g6 w/blank screen

Hook up the laptop to an external monitor. If that works then the LCD screen has failed, and needs to be replaced. If you get nothing with the monitor, but the computer sounds like it is booting up, then the video chip on the motherboard has failed and you will need to replace the motherboard.

7 more replies
Answer Match 78.54%

I have turn my notebook on twice and it was fine. After 1st time charge and the screen stays blank. The power n cap keys lights up tho. I would try hard reset but battery is built in. Any suggestion?

More replies
Answer Match 77.7%

hi
i have problem with my laptop the screen is blank,but it work perfectly with an external monitor,i therefore assume the screen is faulty.replaced the new screen have not resolved the issue.Anybody has got any ideal i would be appriciated.
 

A:Hp pavilion dv6500 screen blank

Hi
was the screen replaced with the correct make and model...?

Did you change the inverter over from the old board or did it come with one, (inverter: a small board usually across the bottom of the screen)

when you fitted the board did you make sure you seated all the conenctions properly..
 

3 more replies
Answer Match 77.7%

Hi, I've been having problems with my display whenever I login.  When I login, the screen goes blank, but is backlit.  It will remain like this even if I close & open it.  The only thing that changes it is restart, where the screen goes to normal... until I login, and the cycle repeats.  Any help would be apprieciated!

More replies
Answer Match 77.7%

Pavilion boots up with no display this morning. Audio bootup is heard from Windows.wifi blue light on.power and speaker LEDs on.flashing led on hard drive flashing so accessing hard drive. tried... hardware reset.remove battery and drain charge from depressing power button while off and disconnect power.all external devices disconnected. same problem after hardware reset. appears so is running but no display.

More replies
Answer Match 77.7%

It seems like some virus. When I start the laptop,it starts fine and then yahoo messanger pop up comes,but the background remains blank.If I close messanger window, it remains blank for few minutes and then again messanger pops up. I cant open anything thru shortcut keys from keyboard.
OS is windows vista.It will be great if i can get some help.
thanks inadvance.

A:hp pavilion dv6000 screen blank

Hi sktomer777,

You said that your background remains blank. Can you see your desktop icons?

1 more replies
Answer Match 77.7%

Hi!

I really need your help guys.
I installed some drivers for my iphone, install with no props, when asked to restart, I do.

(This have nothing to do with the iPhone)
When computer automatic power on, no screen is shown, no boot, and all LED's is on.

1st try:
I let i stay that way for 20 mins, when i look to it, the fan is running like hell, and ite hot! - FAILED

2nd:
I let it cool off, and try to power it on with alt key pressed - FAILED

3rd:
I take out AC, then battery and hold down power button for one minute, plug in AC and try again - FAILED

4th:
I take out HD, RAM, RTC battery, let it stand empty for and hour, put it all back - FAILED

5th:
I try to take out only RAM's and plugged them back in every diffrent way i could - FAILED

6th and last:
Plugged out HD, turned on the computer, and it acted like it never had been removed - LOL?

Im pretty stucked right now, all tests has been done in every diffrent way, with AC in and out.
Also had tried with boot cd in, and have read so many post here and on HP support with no luck.

HELP!!!!!!
 

A:HP Pavilion DV6 - Blank screen, no boot, LED's on

Oh, and its a HP Pavilion DV6 - 2150so
Windows 7 Home Premium x64 OS
 

2 more replies
Answer Match 77.7%

This problem has been persisting for a while now. Whenever I try to turn on my computer, the lights go on like it's booting up, but the screen stays completely blank. Not just dim or black, but off, completely blank. In other words, the computer essentially can't turn on. Any ideas?

A:HP Pavilion dv7 screen issue-blank

Nothing? Come on people

9 more replies
Answer Match 77.7%

Hi I have a pavilion p6 2442ea tower  all was working fine and 1 day I switched it on I got no beeps just a blank screen the fans all work OK, so I trI'd all the tips I was given but no luck ,and by mistake I left it running and a few days later I just come on all working fine for about 1hour but then it just stopped and went back to a blank screen  . Any help pls many thanks

More replies
Answer Match 77.7%

Hi I have a pavilion p6 2442ea tower  all was working fine and 1 day I switched it on I got no beeps just a blank screen the fans all work OK, so I trI'd all the tips I was given but no luck ,and by mistake I left it running and a few days later I just come on all working fine for about 1hour but then it just stopped and went back to a blank screen  . Any help pls many thanks

More replies
Answer Match 76.86%

Plz anybody help yesterday i my dad gifted me a pavilion x2 windows 10 at morning it was working properly but after i had breakfast and tried to power it up the screen was on but it was blank only i can see my cursor plz help

More replies
Answer Match 76.86%

first of all, i have no background knowledge of this laptop, i was just givin it whenever one of my friends was fustrated about this problem.

Anyways, bacl to the laptop, whenever i turn it on the screen does that little dim light where you can tell the screen has power, then shows the HP logo. once the HP logo is gone, it goes right back to that dim lit screen and stays like that.

ive tryed waiting it out but after about 4 hours it still did that screen problem. the solution of taking out the battery and holding the power button did not work for it eathier, i tryed it multiple times. also pressing f8 or f11 at start up does not show up with anything.

I do not care about any files or programs on this computer, i just want it to work normally, i am probably going to end up selling it anyway so dont worry about trying to save my files while fixing it

thanks to anyone who can help me, this is really annoying me.
 

A:(kinda) blank screen when HP pavilion is booted up, help?

9 more replies
Answer Match 76.02%

After a hard reset my laptop has a blank screen that has the hp logo that goes on and off

More replies
Answer Match 76.02%

Hello there, Recently, the screen on my 23xi monitor started to go blank after some usage (the time varies).  When this happens, the power light on the right corner of the monitor remains lit, however the power button doesn't do anything when pressed.  I don't think it's my computer putting it to sleep, since I've already checked my power settings for that, as well as the ones on the monitor's OSD.  The only way I can get a video image back is by unplugging and replugging the power connector located on the back.  I've had the monitor for only a year and a half.  Any ideas? Thanks!

A:Pavilion 23xi monitor - problem with screen going blank

GLP65, welcome to the forum. Have you tried the monitor with another computer?  This would be my first suggestion.  This will let you know if it has anything to do with your computer. Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.

9 more replies
Answer Match 76.02%

Hello Everyone,

I have a hp pavilion p6126f desktop configured with an AMD Athlon 7750, 6GB DDR2 RAM, 750GB HHD, DVD BURNER and Integrated NVIDIA GEFORCE 9100. It has windows vista SP2 (home premium, 64bit) installed.

This was working great until suddenly when I press the power button this mourning and the power light on the power knob came on for a few seconds, fans etc were heard spinning up and then the light shuts off and this repeats unitl the power cable is pulled off. I installed a new working PSU with same results.

can anyone here assist me with this issue.

much thanks in advance.
__________________
 

A:HP Pavilion p6126f desktop restarting with blank screen

Have you checked that the CPU fan is running?

Try to boot from the Vista disc and also try tapping the F8 key at startup to see if you can get into safe mode. Report back.
 

1 more replies
Answer Match 75.18%

Recently, when I start my computer, the Asrock splash screen appears, followed by the pulsating windows logo. Once this is done, it moves on to a black screen with only the cursor visible. The cursor is movable but no key commands seem to do anything. Eventually the desktop appears but it can take up to two minutes and seems to be getting longer every time. I was also looking at my event log and found this entry: "The Religious Religion service failed to start due to the following error:
The system cannot find the file specified." I'm not very knowledgeable on the subject but "The Religious Religion service" sounds a lot like a virus. I'm not sure if these two things are connected, and an AV scan has turned up negative. Thanks for any help.

More replies
Answer Match 75.18%

hi - this old dinosaur has been a good workhorse - but has suddenly packed up.  I'm wondering whether its the motherboard which needs replacing or is there any other troubleshooting to locate the component at fault. forced a hard reset, and have reset memory and hdd.look forward to your responses. thanks

More replies
Answer Match 75.18%

hi there, my laptop does not work properly it has a problem with start up,when i press the start button it does not start just i can c blank screen with my cursor moving around, i m really frustrated of this computer, its happening for last 1 week so pls tell me what should i do.

A:HP Pavilion g series, startup problem,hangs up, blank screen...

Could you please give me the exact model number of your notebook?You can use the following document if you need assistance in finding it. How Do I Find My Model Number or Product Number?

9 more replies
Answer Match 72.24%

when i start my hp pavilion g series laptop all that happens is a light goes on the power button and on f12 button. the screen stays off and i can hear either the fan or the hard drive working. can somebody please help me.

More replies
Answer Match 72.24%

hello..I have hp pavilion g6 2230 notebook. yesterday night i was working on my notebook. then i shut down it. next morning i tried to on my laptop, but it is not start. i perform hard reset 3 times. but laptop does not satrt. caps lock and wireless key led does not blink and screen also does not blink. charging is done as earlier.

More replies
Answer Match 72.24%

My laptop was working fine the other day... Came back to it the next morning and the screen wouldn't come on and it kept resetting every 30 seconds or so. Once I finally got it to boot and get to sign in page the screen was all scrambled. But, everything else worked I could log in but couldn't do anything...

Anyone got a solution?

A:blank screen and restarting laptop every few secs or scrambled screen at sign in screen

What do you mean scrambled?

4 more replies
Answer Match 71.82%

Hardware Dell AMD desktop, 3 GB ram, pre-loaded from dell with Vista, SP 2 is installed.

Initial problem: Windows screen went black, Icons still show and was able to open IE. It was not full function, lost fav and it did not remember me when I went to know sites that use to have my data. Also in the lower right hand corner of the black screen it said I was not running a genuin copy of windows vista.

It would not allow me to do a restore in normal mode. Booted in safe mode and was able to restore to a previous date.

When I booted back up in normal mode all looked fine, went to start IE and it comes up with a white screen for about 3 seconds then just closes back down. Can start IE from safe mode but it still has limited function.

MCafee anti-virus is current
Installed Malwarebytes while in safe mode, ran it and it found 3 problems, deleted the files but the problem still exists. Can not tell you which MB fixed, I did not write them down.

Should I try downloading IE 8 while in safe mode, install it and then re-boot in normal mode?

Any help wouldbe appreciated.

John

A:IE 8 will open to a blank screen then close right away

See this MS website: Internet Explorer opens, flashes, and then closes immediately when you start it

3 more replies
Answer Match 71.82%

please analyze my hijackthis log. i can't log into my email account on this particular computer only. i also have other problems with links on other websites. i also have a virus or something that plays music and commercials randomly, usually after i've run a program that plays music. please help, i've been dealing with these problems for weeks.

thanks, chris

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:46:47 PM, on 8/7/2008
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v7.00 (7.00.6001.18000)
Boot mode: Normal

Running processes:
C:\Windows\system32\Dwm.exe
C:\Windows\Explorer.EXE
C:\Windows\system32\taskeng.exe
C:\Windows\System32\mobsync.exe
C:\Program Files\Windows Defender\MSASCui.exe
C:\hp\support\hpsysdrv.exe
C:\Program Files\Hewlett-Packard\On-Screen OSD Indicator\OSD.exe
C:\Program Files\Intel\Intel Matrix Storage Manager\IAAnotif.exe
C:\Program Files\Common Files\Symantec Shared\PIF\{B8E1DD85-8582-4c61-B58F-2F227FCA9A08}\PIFSvc.exe
C:\Windows\System32\igfxpers.exe
C:\Windows\RtHDVCpl.exe
C:\Program Files\Common Files\Real\Update_OB\realsched.exe
C:\Program Files\McAfee.com\Agent\mcagent.exe
C:\Program Files\Portrait Displays\Pivot Software\wpCtrl.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Hewlett-Packard\Digital Imaging\bin\HpqSRmon.exe
C:\Program Files\HP\HP Software Update\hpwuSchd2.exe
C:\Windows\System32\hkcmd.exe
C:\Program Files\Common Files\ArcSoft\Connection Service\Bin... Read more

More replies
Answer Match 71.4%

Product name: HP Pavilion DM4 Notebook PCProduct number: LS721EA#ABU I tihnk it is 64-Bit but I am unsure. I upgraded to Windows 10 about 4 months ago.  Hello, I have an HP Pavilion DM4. When I tried booting up this weekend I got a black screen with a flashing white line in the top left hand corner. In the bottom left hand corner I had a message "Press Esc Key for the Start Menu". I tried a hard reset and the caps lock LED button comes on. I have since run the system diagnostics test and the Start-up Test, Run-in Test, Memory Test and Tune up failed. The description for each one is Memory module. The error code is as follows: Tune Up: 64RHWW-5MV85J-XD6V5G-401MO3All others: 64RHWW-5MV85H-XD6V5G-400503 The hard disk abd battery tests passed. I reseated the memory module but that hasn't made any difference (It was positioned correctly when I took it out) Can anyone recommend what I should do next? ThanksSimon

More replies
Answer Match 71.4%

Laptop was working and I closed cover for about 10 minutes - when I returned and opened laptop up it sounds like it is going to start up but screen remains blank and I can not enter password - please help me ?

A:My pavilion sounds like itnis going to start up but screen r...

Dear Customer, Try a Hard Reset as follows, Shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for a full minute.  Plug in the AC Adapter ( leave the battery out for the moment ) and see if the notebook will start.   Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

2 more replies
Answer Match 71.4%

I'm having problems with my laptop (HP Pavilion dv4 1428dx) the last thing I did was put it to sleep, then cameback and tried to wake it up but it would not start up. All the lights are on, but the screen is black and the only thing I hear is the fan moving. The caps lock and num lock keys have a blinking light, not really sure what that means. The power LED is on, the battery LED is on, but the hard drive LED is not on. This computer is almost 3 years old and I have never had a major problem like this until recently. If anyone has any solutions I would gladly appreciate them.  Thank you for your time,Freshman4002











Solved!
View Solution.

A:HP Pavilion dv4 1428dx black screen/will not start up

The blink codes state caps lock/num lock because it could be just the caps lock, just the numlock, or both.  If both are blinking, then it counts as one blink for each time.

 

If it is blinking just one time and pausing for 3-4 seconds, then that indicates the processor POST test failed.  A processor failure usually requires a new processor, but some have been able to open the notebook to reseat the process and apply new thermal paste to get the issue resolved.

 

If it is under warranty, I would recommend contacting HP for service. 

If it is out of warranty, then I would contact HP to get a quote and compare that to the cost of a local PC shop to weigh your options. 

 

 

10 more replies
Answer Match 71.4%

My Hp pavilion laptop will sometimes turn on when i try to start it but then it freezes after a while and i have to turn it of at the button. When I do this and then try to start it up again it just frezes at the startscreen and wont turn on unless I make a system recovery. If I do a system recovery the computer might work for about 30 mins and then its back to freezing/turning blue/black. Please help!

More replies
Answer Match 71.4%

I have a Pavilion dv6 laptop, which runs on Windows 10 (though reconfigured from windows 7) with serial no: CNF9478B7B, Product: VS080EA#ACQ and Model: dv6-1310el. My laptop started acting up last night... I turned on the power button as usual, the lights on the power button, caps lock key, the wireless connection key, volume control display,the charging and battery light display and the cursor control key on the touch pad were on, and the fan was on as well, but the screen was totally black.  I waited a few minutes to see if it just had to take some time to do whatever it needed to do if it was trying to start up, but it kept doing the same thing.  After a few minutes, I turned off the power button to shut it down and turn it on again but there was a shalow view of hp which normally displays when the system is turned on and it still went dim (black) again. Nothing happened with the screen... it just seemed "stuck".  So I did remove the battery and pressed down the power button for about 2 minutes and put back the battery yet the same experience.  I'm not really sure what caused this. So....... I have no idea what to do!I usually try to take good care of my laptop This is the first time this problem has occurred.  I'm really hoping that my documents that are on the computer won't get deleted because of this issue....Anyway, if anybody has any insight on this issue, I would greatly apprec... Read more

A:Pavilion dv6 1310el won't start up-- black screen

 Basic steps which should resolve the issue:Turn off the computer.Disconnect all peripheral devices and remove all USB devices and media cards.Disconnect the AC power adapterRemove the batteryPress and hold the power button for at least 15 seconds.To drain any residual power, reconnect the AC power adapter, but do not connect the battery.Turn on the computer.Else, try connecting an external monitor to check if you get any display. You can check the following links if the issue still persists for more solutions:http://support.hp.com/us-en/document/c03518165http://support.hp.com/us-en/document/c04718479  If this has helped you to resolve the issue, please click on "Accept as Solution" on said post. To show that you 'like', or are thankful for my post, kindly click the?Thumbs Up? below. If there is anything else I can do to help, please be sure to let me know! 

1 more replies
Answer Match 71.4%

Hello, I have an Hp dv7 laptop. When I start up the computer I get a completely blank screen. I have turned it on and off a few times. One of the times when I pressed a bunch of buttons the screen would go fuzzy then back to blank. The caps lock button keeps flashing and that's about all the information I have.
Is there anything I can do?
or any Idea what the problem is?
 
Thanks,
 
Adam
 

A:blank screen on start-up

Have you consulted your user manual to determine what the flashing caps lock means?

4 more replies
Answer Match 71.4%

My computer has two ram slots filled with 512 mb each, I replaced 1 ram card with a two gb ram card and tried to start my computer after I plugged it in. All I got was a blank screen. I replaced the new card with my old one and my computer started up normally. Does anyone have any suggestions? I also can't enter bios, it is just blank.
 

A:Need help with ram, got blank screen when tried to start up

Hi,

We have a few possibilities but first try these two:

1) Verify that your motherboard can support up to 2 GB per slot.
2) The RAM You bought is defective; return it and purchase another one. I suggest 2 stick of one 1GB each.
 

5 more replies
Answer Match 71.4%

When i start my computer it goes to the page that says there was an error and i have to pick "Safe Mode" "start windows normally" ect. it wont let me select or hit enter or anything. when the time runs out it shows the windows xp loading page then goes blank. what do i do?
 

A:Blank screen after start up.

Hi and welcome.
Try.
Boot from Xp Cd...when prompted press [R]
Choose Windows installation [typically by pressing [1]
When prompted for password.
Press Enter.
Type chkdsk /r [note space ]
Window will fix errors..
Type Exit
And press Enter
 

1 more replies
Answer Match 71.4%

Hi i am a complete beginner.. anyways i have a dell inspiron 1750 and my OS is Vista. Everytime i switch my computer on, you see the dell sign, then just a blank screen, doesnt even give option to open in safe mode etc. if i turn off and F12 and run diagnostics it passes and then will come on and work. I have done Seatools for windows tests and there all fine except the USB long generic fails without option to repair :/ also already downloaded CCleaner, spybot, Ad-aware and AVG and all been fine. Pleasssee help oh ive also done a windows disk check which came back fine.
 

A:Blank screen on start up :(

First of all you have too many antivirus programs in there.What most people use and recommend on here is MS security essentials which is totally free and does a very good job.A blank screen can mean that the video or graphics cards need updated, or a problem with the screen itself or other problems.when you say blank is the screen any color at all such as white, black, blue etc?A white screen usually is a graphics or video problem or even a shot motherboard.
 

3 more replies
Answer Match 71.4%

When pressing the power button it makes a quiet start up sound and the only indication that it is working is the tiny flashing light on the "Caps Lock" button on the left hand side of the keyboard. The system does not load and the screen is blank.The laptop arrived new only a couple of days ago, and worked fine for over 24 hours.To help me get used to using a laptop I used a wireless mouse via a small USB which went into the port on the right hand side.What appears to have happened is the AA battery in the mouse expired which caused the screen to freeze. I then removed the USB and attempted to carry on by using the touchpad, but nothing seemed to work. I replaced the mouse battery but this did not rectify the situation.With no other option I switched the power off by holding down the power button, but since then I have not been able to start up......I can hear the laptop by putting my ear very close......but the screen is blank.Do I need to send this product back...Can anyone help..?Alan

More replies
Answer Match 71.4%

hey was wonbdering if ne-one could help me this problem before it goes to taking it to be repaired ..

Bout a week ago grpahics card messed up, tryed to download new drivers, didn't help, rolled back to old drivers, nout happened ..
Screen was stuck in 4bit colour, and was on 640x640 setting (thinks)
anyway tryed to restart a couple of times and adjust the screen back to normal but screen would go funny and a visual wouldn't return ..

now on start up no screen to be seen, completely black
have had trouble with black screen on start up cuz i'm on a amd processor ..

am using an acer laptop, nvidia 5700 go 64mb graphics card ..

help
 

More replies
Answer Match 71.4%

Hi All,Would appreciate some help with my current problem which leaves the system frozen.The cursor moves around ok but apart from a line down the screen about quarter way in from the left,the screen is blank. I am running
System details are as follows:HP Compaq DX2200 MT Intel ® Pentium ® 4CPU 3.20 GHZ,896 MB ram.
Microsoft windows XP version 2002 service pack 3
Browser 8, virus protection-Bitdefender.

I have been able to get the page up after hitting Control,Alt, Delete and this shows zero action on the CPU.
After about 30 mins the system gets going and starts up.I have at this point had a message to say that the firewall protection is switched off. Does this sound like some kind of contention between programs I am running or,perhaps a virus lurking somewhere.
At present the system is running normally and next time I switch on it may be fine.If it is a hardware prob I will probably junk the machine as it is getting a bit past it now.
many thanks
Sandybay

A:Blank screen after start-up

Hi Sandybay -Please use Speccy to provide details of your computer's configuration.Download, install, and runAfter Speccy has finished gathering information, click File > Publish SnapshotIn the Publish Snapshot dialog box, click Yes to enable Speccy to proceed.A web address will be displayed, click Copy to Clipboard and paste it in your next post.This will help us see some hardware an some software problems -Thank You -

1 more replies
Answer Match 71.4%

On trying to start my pc. I get an error that explorer.exe has failed to start. With the error code 0x0000022. The screen then goes black and I all I have is the mouse pointer. I can get the task manager to load using CRT alt del. I tried going into safe mode and creating a new using account. This account gets the same error but loads with a blue screen.
I have run my norton internet security in safe mode and it's doesn't find anything nor does the norton bootable recovery tool.
I looked at doing a system restore, but the only date available is the date this problem started.
I have tried the sic /scannow command in safe mode and it finds nothing.
Any help would be great.
ThanksThat should be sfc /scannow

A:Blank screen on start up.

Hello Screwbuzz! It seems that your pc is infected, try to system restore it.

7 more replies
Answer Match 71.4%

soon after I fixed a virus on my computer, when i booted it up, after the windows welcome screen, there is only a black screen with the mouse arrow.I have tried chkdsik, fixboot, and several other commands in the recovery console.I used an cord and was able to back up all of my files, they are still in tack.I also ran the manufacture diagnostics.When i tried to start it in safe mode, the same blank screen, this time the arrow is larger.I will start fresh working through the problem if that is what is needed.I noticed last time i turned it on, the lights for the disk drive is not flickering after boot and the keyboard lights (num lock, cap lock) are not illuminated.I am just not sure what else i need to look at for a fix.Thanks,It is 3 year old dell laptop with a westerndigital hard drive running xp media center.

A:Blank Screen on start-up

Did you try the fixmbr command from the XP Recovery Console?Louis

8 more replies
Answer Match 71.4%

Hello, I am having a problem with starting up my computer. I recently just bought another CPU fan after giving my old one to a friend for his PC. When I put the new CPU fan in my computer, Windows loaded up just fine. After a few minutes, I would get a blue screen. I kept rebooting and the blue screen still appeared. It never did this before I switched the CPU fan. So I shut the computer off for a while, turned it back on and nothing comes up on the screen. Not even the lights on the PC turn on. I can hear the harddrive turning on and I can see the CD-ROM light go on but that's about it. No beeps or anything. I tried replacing the CPU fan, power supply, the case, grey cable wires, and nothing seems to be helping. Any suggestions would be appreicated. Here's the computer info:

Windows 98 SE
256 MB RAM
AMD Athlon 1 GHZ
Gigabyte GA-7IXE4 Motherboard
 

A:Blank screen on start up

11 more replies
Answer Match 71.4%

Hey all,

I need some help or info on a problem I got on my Dell Inspiron 1525 laptop, it is currently running on Windows Vista Home Premium 32-bit, Service Pack 2.

OK, Here's the problem, I was in my granny's house, and they just bought a new Panasonic HDTV , with a HDMI port on it, so I thought of connecting my laptop to the TV too watch a movie. But, I was waiting for my cousin to finish taking a bath. So while waiting I thought, why not play a game before she comes out of the bathroom? So my brother comes out and say, let's play a qick game first, so I started Oblivion IV.

When I was halfway playing, the game suddenly froze. So I thought, must be because the graphics was too harsh on my laptop, and I tried to open Task Manager to close the program manually. But, nothing happened when I press CTRL + ALT + DEL. I tried it a few times, and nothing worked.

So I shut down the laptop manually(Hold down the power button), and when I press the power button to turn it on again, it started up like it would normally, then when it reached the Microsoft Loading screen(where the thingy runs in this rectangular bar during startup, with Microsoft Corporation written at the bottom), I noticed it took longer than usual, and then when it finished loading, the screen became black with only a cursor visible( Known as BlacK Screen Of Death I think). I tried rebooting a few times, but it still wouldn't work. And then one time, i rebooted and when the loading screen finished, the whol... Read more

A:Blank Screen On Start Up

Reply to this message if you have any info or a way to fix this, Thanks.

Kelvin

4 more replies
Answer Match 71.4%

This did not qualify as a BSoD but I managed to lose all of my tiles from the Start Screen, and since my background was blue, well, it was like a time warp.

Anyway, after installing Google Chrome and making it my default browser, I looked on the Start Screen and could not find a Chrome tile. The All Apps screen did have one and when I right clicked it, it indicated that it was on the Start Screen as it had the "Unpin from Start" icon. After trying various methods of getting it to show up, I did unpin it, which also removed it from the All Apps screen of course, then did a search for Chrome, started Chrome and then closed Chrome. When I then tried to go back to the Start Screen to see if there was a Chrome tile, I was greeted by a totally empty screen. I rebooted Win 8 and everything came back normal (I hope) but now with a Chrome tile.

Anyone have insight on what might have occurred?

Thanks
SR

A:Blank Start Screen

Dunno, usually totally black screen means activation problems, check your activation, SLMGR.vbs /dlv

1 more replies
Answer Match 71.4%

Product Type: Notebook
Product Model: Asus C90S
Operating System: Windows Vista 32-Bit Service Pack 1
Chipset: Intel 945 G Chipset + ICH7
Processor: Intel Core 2 Duo 2.4Ghz
Display: WSXGA+(1680x1050) Color Shine 15.4'' LCD
Graphics Card: NVIDIA Mobile PCI Express Module/GeForce 8600M GT 512MB
Memory: 2 SO-DIMM 1GB each
Hard Drive: 2.5" 9.5mm SATA HDD 160GB 5400RPM


My notebook has been working fantastically for a long time, but when I tried to boot it up this morning the screen stayed black as the blue power button and the other buttons came on. All of the LED's work normally and the keyboard lets me use the lock buttons as if the keyboard is still working. I have no updated any drivers and have not updated any programs for at least several weeks. I tried holding Fn and pressing F7 at the same time but the screen stayed black. I opened the case up and reseated the hard drive and memory modules, and even reset the on-board battery to flash the BIOS. I have tried running the notebook without the battery and just on battery. I also did the electrical/Bios reset suggested by the Asus technician. Nothing has worked and the notebook is still having the same behavior. I have never dropped or damaged the notebook, and this has never happened before today. I don't have to do a "hold for 5 seconds" restart to turn the laptop off, but I do have to press the power button a single time. I have also tried hooking up an external monitor to the laptop but it stay... Read more

More replies
Answer Match 71.4%

When I start my computer, it will start to load, the windows logo appears, and then it screen goes black.  I'm able to move the cursor but can't do anything else.  I am able to start in safe mode just fine.  I updated the graphic driver but didn't seem to help.  Any other suggestions to get windows to start?
 
HP
Windows 7
Pentium dual core T4300 2.10GH
64 bit
 

A:Blank screen at start up

Was there any changes prior like software installed and driver updates? More information is needed. Run this in safemode. Try downloading Speccy and then install the program.  To post and publish a snapshot of your PC.. In the Menu bar, click File -> Publish Snapshot. Click Yes > then Copy to Clipboard. On your next reply, right-click on a empty space and click Paste on reply box then click Post.

35 more replies
Answer Match 71.4%

Once I turn on my computer and enter my password to log in, my screen turns black. The only way that I can get anything to appear is to press control alt and delete and go to task manager. Once in task manager I go to file then new task and find where it says explorer and click on that and my home page will appear. I have to do this everytime I start up my computer. Any thoughts?
 

A:blank start up screen

see if this helps.. http://i.nconspicuo.us/2007/08/28/rebuild-windows-vista-icons-cache-vista-displaying-wrong-icons/
 

2 more replies
Answer Match 71.4%

Screen occasionally went blank before but fixed when I closed and reopened the lid.Now the screen does not work at all. When I start up the fan starts but the screen stays blank. Have tried taking out the battery

More replies
Answer Match 71.4%

I have a dell computer. I get the basic dell 4550 series start up screen and then it goes blank with a blinking underscore.

I called my dad he thinks it's something to do with the hard drive. And he thinks CMOS was reset?

I really don't have a clue. I know this morning it worked fine, and then I vacummed behind the computer. I might of bumped it a few times, not to hard.

Thanks for any help or suggestions.

This is

Windows XP
2.0 Ghz Pentium 4
64 Mb GeForce 4
1 GB DDR RAM
232 GB HDD
 

A:Blank screen at start up

6 more replies
Answer Match 71.4%

Hi i am a complete beginner.. anyways i have a dell inspiron 1750 and my OS is Vista. Everytime i switch my computer on, you see the dell sign, then just a blank screen, doesnt even give option to open in safe mode etc. if i turn off and F12 and run diagnostics it passes and then will come on and work. I have done Seatools for windows tests and there all fine except the USB long generic fails without option to repair :/ also already downloaded CCleaner, spybot, Ad-aware and AVG and all been fine. Pleasssee help :) oh ive also done a windows disk check which came back fine.

A:Blank screen on start up

Hi and welcome to TSF have you tried running a start up repair Startup Repair: frequently asked questions

6 more replies
Answer Match 71.4%

I have had this computer for the past 10 months and i upgraded it to Windows 10 shortly after I purchased it. Now, there's been some problems which are not so big, like the headphone jack not working anymore, but I can kinda live with that. Las night, my computer crashed and wouldnt turn on. When I switched it on, the power button and wifi were the only lights on and the screen was blank. I forced shut down and turned on a couple of times before leaving it on for about an hour. An hour later, I forced it shut down and turned it on and then it worked! I was happy and decided to shut it down and turn it on again tomorrow to use. Today, I can' t turn it on at all. The same lights are on and the fan is running but the screen is blank. I've tried removing battery, AC adaptor, hard reset but it all doesn't work.I'm not living in the area I purchased it from so I wont be able to send it for warranty until a month from now when I go back. Is there anything I can do to fix it?

More replies
Answer Match 71.4%

Hello everyone, need some serious help!!!

Whn i start up my windows xp in normal mode it just comes up a completly blank screen.However, it will allow me to start up in SAFE mode.

I start running a scan in safe mode but it wont let me... think its a virus.

I have tried restoring my computer back to a couple of days ago when it was working but that wont even let me restore... think it is a virus you know peps.

Anyone got any ideas or can help me pritty please:-D

I know i can reinstall the xp disc, but will loose all my pictures and music:-(

PLEASE PLEASE PLEASE HELP ME AS SOON AS POSSIBLE!!!
 

A:Blank screen when i start up???

If it starts in Safe Mode, copy all your pics and music to CD, or USB drive, before you reinstall.

moper
 

1 more replies
Answer Match 71.4%

it all started when someone gave me a virus on msn since then my computer has seemed to gone from bad to worse. Its got to the point when i turn on my computer it loads up but when it comes to the bright blue log on screen, instead it goes blank and freezes, sometimes it even says no input signal. Then i have no choice but to turn my computer off by the mains and then start it back up where i get the option to go on safe mode and then it works. However this isnt right there must be something wrong with my normal mode. Has anyone got any ideas how to fix this problem ? i cannot get onto the normal mode at all!
 

More replies
Answer Match 71.4%

My HP Stream 11 starts with a blank screen on start up. Responds sometimes with a hard reset but doesn't always. Have changed settings to do nothing when lid is opened or power button is pressed but still having problems.











Solved!
View Solution.

A:Blank screen on start up

Hello, Thank you for posting in the HP Support Forum. Welcome ! Seems like a driver issue to me. Please, use HP Support Assistant => http://support.hp.com/us-en/document/c03467905Ensure you have applied all the latest drivers and updates from HP. Please, use Windows Update and check if you have installed all the latest patches. Let me know if this works for you.

5 more replies
Answer Match 71.4%

Hi, can anyone help me? I started my pc up yesterday as normal and the usual black screen appeared showing all of the white writing you get on start up, folowed by the Amibios screen then Windsows XP home edition then it suddenly went blank! Totally black screen. I have tried a few times now but still the same thing happens. It is obviously not the monitor as you can see the booting going on but I just don't know why the screen goes blank. I have tried starting it in safe mode also but to no avail...it is sooo frustrating!

Thanks in advance for any advice offered!

Claire

A:Blank screen on start up

Make sure that you didn't leave a CD/DVD in the drive. Have a read here:http://support.microsoft.com/?scid=kb;en-us;314503

3 more replies
Answer Match 71.4%

Was overclocking my ati x-800 though ntune, it locked up and i restarted. It doesn't show anything on the screen when I restart. I reset the cmos, but nothing. Don't know what to do next?

More replies
Answer Match 71.4%

When pressing the power button it makes a quiet start up sound and the only indication that it is working is the tiny flashing light on the "Caps Lock" button on the left hand side of the keyboard. The system does not load and the screen is blank.The laptop arrived new only a couple of days ago, and worked fine for over 24 hours.To help me get used to using a laptop I used a wireless mouse via a small USB which went into the port on the right hand side.What appears to have happened is the AA battery in the mouse expired which caused the screen to freeze. I then removed the USB and attempted to carry on by using the touchpad, but nothing seemed to work. I replaced the mouse battery but this did not rectify the situation.With no other option I switched the power off by holding down the power button, but since then I have not been able to start up......I can hear the laptop by putting my ear very close......but the screen is blank.Do I need to send this product back...Can anyone help..?Alan

More replies
Answer Match 71.4%

hi guys !
i have just installed a new hdd and clean install of xp on a acer veriton m261 and when needing to re-start lets say after a update from installing Microsoft updates upon the restart it goes by the option to go into bios etc and hangs on a black screen until i re-start completely , now nothing of anything unto-wards happens from a normal power up ? all good and i have never had any problems at all of this nature prior to the fresh install of xp and the new hard drive anybody can shed any light on the situation please !!

A:blank screen on re -start

Please Post your specs?

RAM
CPU
GPU
BIOS
Motherboard
HDD SATA or IDE PATA
Thanks.

6 more replies
Answer Match 71.4%

Hello everyone I have been having some issues with an hp pavilion f1903 monitor, which I will summarise below: Upon start up / or when bringing the computer out of sleep mode after a long period of time has elapsed, the screen remains blank.Turning the monitor off and on again, and then clicking the mouse will bring up the screen for a fraction of a second before it disappears.After a while of going back and forth like this, the display will re-appear and there are no further problems with the monitor which functions normally, with no flickering. The period of time that it takes for this to happen appears to be increasing.The blue light on the monitor power button no longer functions, although the orange light indicating that it has entered sleep mode does still work.My suspicion, given the monitor's age, is that this is a power supply problem, however I would wlecome anyone else's thoughts.  Whatever the outcome, this has been a very good monitor. Many thanks in advance.

More replies
Answer Match 71.4%

I'm having a problem with my computer. It's a dell laptop running Windows XP. This problem just started very recently, the only thing I can think of that might have done it is either installing my new printer or installing Lord of the rings online, those are the only things I've installed around the time I noticed this problem started.

Anyway, the problem is, when I start up my computer, it shows the windows Welcome screen, then just shows the mouse cursor against a blank background. No taskbar, no nothing. I've figured out a way to get around this somehow, by opening the task manager and ending explorer.exe, then logging off my user and logging back on when I get to the login screen. After all that, everything seems fine, but I just can't figure out why it's doing that in the first place or how to fix it.

I would greatly appreciate any help or insight into solving the problem, thanks.
 

More replies
Answer Match 70.98%

Hello! I have a HP pavilion dv6 2088dx laptop that will not power on fully. What I mean is, I get a black screen, no blinking lights for capslock or numlock, and it only seems to make a tiny bit of "powering on" noises. The wifi and sound icons (above the keyboard) both glow red (normally will turn white or blue when fully powered up). I've tried force restarting, plugging in an hdmi cable to my tv (to rule out display issues), removing the battery, removing the hard drive and restarting, even starting it with the memory stick removed. My techie bf is wanting to put the motherboard in my oven, but I thought I'd check with you guys first. (I've been a member here for years, but can't remember my password or email that I used to sign up, but you guys have never steered me wrong!)

Thanks,

Uni/a11iecat
 

A:Solved: hp pavilion dv6 won't start - black screen, no bios

16 more replies
Answer Match 70.56%

i start my laptop it on and the screen is blank after that few second later i
help me....when i turn on my laptop...it on and the screen is blank...then the locked light which on the keyboard is on and off and again and again n repeat...then after around 30 second it automatic off agian...

in the next day...i try to on it agian...it work...but when i success go in to the window...and i run my program...it lag at there...i cannot move my mouse and also cannot key in any work...then i close the laptop n reopen it...then the problem repeat agian...

have anyone can tell me how to fix tis problem?it is a dell laptop...600m
 

More replies
Answer Match 70.56%

Installed 2 512 DDR Ram, Blank screen on start HELP!

I just got 2 512 DDR 400 ram sticks, i put them in my comp, turned it on, and my monitor was just blank, i tried switching slots, and tried only puting one in, samething..
 

A:Installed 2 512 DDR Ram, Blank screen on start

And what about the old RAM you used before? Did you try that already?
 

2 more replies
Answer Match 70.56%

Startup loads through "Loading Personal settings", then nothing. I can get to Safe Mode and connect to Internet.

I cannot cut and paste so will summarize. I had to run dds from command line. I got errors "EDS.EXE Can't
read startup", "Could Not Find C:\DOC"

After dds runs, popup, "sort utility needs to close". Attach.txt is empty.

============================
I cannot paste, so will try to attatch log file.
============================

Any help is greatly appreciated.

Don

A:xp" No icons or Start. (Blank screen)

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine.??If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine.??Please perform the following scan:Download DDS by sUBs from one of the following links.??Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool.??No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

24 more replies
Answer Match 70.56%

The other day my daughter told me her computer turned on fine, then the screen flashed on/off and she had the monitor adjustment icons showing on the screen (but they could not be adjusted). On the CPU the power light was on but you could not turn it off by holding in the button. If you pulled the power cord for a few minutes and then plugged it back in the power light came on, it tested the DVD Drive, but it did not run through any start up, the CD did not run and no display other than described above was on the screen. Can not seem to get it to boot for the recovery CD. Any idea what might be wrong? It is an emachines 2800+ AMD Athlon XP Processor.
 

A:Computer won't start, blank screen

9 more replies
Answer Match 70.56%

Windows XP

On start up, besides being slow, near completion of boot the screen goes blank and cannot get it back. Moving mouse, Ctrl-Alt-Del or Esc does not help.

Not enough time to get to restore either.
 

A:Solved: Screen goes blank on start up

15 more replies
Answer Match 70.56%

Still struggling with a blue screen problem; see prior threads/posts. Running Ok in safe, but can't get beyond log in normal mode, systems just stops. run AVG, spybot, regcure, malware repeatedly finds and fixes but still no go. Tried turning off some autorun files too. Any admin or moderator get any words of wisdom, it's a toughie!

HJT log below

Logfile of HijackThis v1.99.1
Scan saved at 22:50:31, on 07/09/2008
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16705)
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Internet Explorer\iexplore.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Hijackthis\HijackThis.exe
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.dell.co.uk/myway
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://g.msn.co.uk/0SEENGB/SAOS01?FORM=TOOLBR
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://g.msn.co.uk/0SEENGB/SAOS01?FORM=TOOLBR
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.bbc.co.uk/
R1 - HKCU\Software\Microsoft\Internet Explorer\SearchURL,(Default) = http://g.msn.co.uk/0SEENGB/SAOS01?FORM=TOOLBR
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Local Page = \blank.htm
R0 - HKLM\Software\Micros... Read more

More replies
Answer Match 70.56%

hello
i have not used my pc for a cuople of weeks
yesterday turned it on - just a blank screen - ages later (about 4 mins longer than usual)
states you have started with selective startup etc
when win xp pro eventually starts i go to msconfig and change to normal startup
restart the machine and it again starts up in selective startup
do you think i have a virus
thanx

More replies
Answer Match 70.56%

I have a HP Pavillion G5232UK i recentally bougnt a new case and a 450w p/s (replacing my 350w p/s) the fans start up all of the lights come on it, nothing happens when i hold the power button to turn it off. I have unplugged everything and reinserted it also tried using my old p/s, tried starting it up with my sticks of ram removed and I still have the same problem. could using the 450w p/s have been to much power therefore ovarloaded and damaging my video card or motherboard please help.
 

A:Solved: blank screen at start up

7 more replies
Answer Match 70.56%

Hi there,

I have a self made PC with Winfast Foxconn MB, AMD64 3000+ socket 754,
ATI 9250 AGP.

I installed everything, connected the cables but the computer does not turn on. I receive a blank screen and nothing else.

The MB and proccesor worked previously on a different system that I have upgraded.

What can it be?

The FANs are working, I can not turn it off from the power button.

Please help me.
 

A:My computer does not start, blank screen

If you get no beeps Id suspect a bad connection... I have seen this on the CPU. Simply remove it and reseat it. I have also seen bad AMD boards do that. I saw on two seperape occasions exactly what you describe... if I let them sit there for 5 minutes to warm up and then restart them they worked. In that case the problem could be cold solder connections somewhere on the mobo. Not a good situation as most computer users dont have the skill or equipment to find that type of problem.
 

5 more replies
Answer Match 70.56%

Hi,
I don't know if this is the right place for this post...sorry if it isn't! I had searched online if someone has the same problem of me, I found similar problems but not the mine one (but if there is, can you please give me the link?).
I have a DELL LATITUDE D830 with a dual boot (Ubuntu and Vista). When I start Vista I get the Windows logo and then a black screen with the mouse pointer only.
Keybord doesn't work. I can move the mouse, but cannot select anything. No Ctr+Alt+Del works.
I can just switch off the computer. At the start up I need to press F8 to be able to choose something otherwise I get the black screen.
If I reboot in debug mode it seems to have problems when/after (?) loading crcdisk.sys driver...it doesn't tell me anything...
If I reboot asking automatic restore of PC it asks me the account and the only working account is the mine one (no administrator available). Then it suggests to contact the administrator. I have checked the error report and nothing is reported: system is working.
I have no previous configuration to restore.
I can access to the prompt. So I tried to write sfc /scannow. The answer is that to be completed the process requires to restart the computer and to do again sfc /scannow. I restart again, do the command again, but I get the same answer.....
When I get the black screen the processor is not off, because after a long time (2 hours about) the computer restarts by itself....so something is happening even if I don't know what... Read more

A:Blank screen at Vista start up..

First of all...have you tried Windows Vista Startup Repair? There is a tutorial in this Forum on how to do that. Sorry but I am horrible with hyperlinks.

If that doesnt work, you can still install Vista over the previous with a reformat to ensure correct install and operation. You can install a Program called EZ BCD. It modifies your boot file to choose which OS you which to boot to, times, and default OS to boot to.

You can find that either by googling it or at download.com.

I hope this helps.

2 more replies
Answer Match 70.56%

OK no windows not even that BIOS stuff just blank screen and beeps roughly every 3 seconds

Heres the things i`ve tried so far...

Windows XP Home Edition CD wont work

Removing stuff give it a clean and slotting back in didn`t work

And heres a quick guide to whats happened so far...

I had this problem before but some times it would start up and say theres a nostkrnl.exe missing or corrupted, i tried eveything on the windows cd recovery console what people told me to do but it didn`t work
So eventually i thought what the hell and decided to reload windows... which was a complete success as it kinda went over the top of the old ones so i could find my old files and stuff

Unfortunately i turn it off and then on again the next day and i`m back to the beeping and blank screen... and this time theres no getting into safe mode or windows CD or anything

Please Help....

A:HELP!!! PC Blank screen at start up and 3 sec`s beeps

If it was a desktop computer it has an external monitor, most monitors
show a configuration screen when first powered on until it receives a signal.
Turn the monitor and computer both off for a few seconds, turn the monitor on
you should see the default config screen for it with possibly a logo of the manufacturer,
turn the computer on, does the monitor turn black or does the configuration screen still show?

Next thing is what make and model is the computer? If it is a dell desktop you should be able to locate
4 LED lights on the back near the USB ports labeled A/B/C/D when you power your computer on and hear the beeps
see if any of these lights turn on and take note of them also take note of the beep sequence (# of times and how many
times it occurs also how frequently).

Report back with this information.

7 more replies
Answer Match 70.56%

Hi

I was wondering if you could help me. I have a Acer laptop that is currently running build 7068 (specs available at the side there for full info). Since build 7000 I have been doing update installs, which have worked find (save a few glitches here and there), and I wanted to do a clean install of build 7100. However, when i boot from CD or USB pen, as soon as the Windows Logo disappears, the mouse cursor appears for a second (against a black screen), and then all I get is a completely blank screen, no disc accesses, CD accesses, nothing.

If I do the install from within Windows (again a clean install), the files copy across okay, but as soon as it rebooots during expanding, I get the same again, a blank screen and nada!!!!

I'm not sure if it's the graphics card at fault, or what, but surely if the beta build had enough drivers, this should. Could anyone suggest anything that may help?

Thank you.

A:Blank Screen at start of installation

It sounds like you may have a corrupted image. You might try a different .iso or burn the one you have at a lower speed on a new DVD. Good luck.

9 more replies
Answer Match 70.56%

Every since I installed my Radeon 9250, on startup after about a min or so, the screen turns black like it would when you change display settings (ie. resolution, refresh rate etc.). What can I do to stop this?
 

A:Screen turns blank on start up for a second of two...

It may be blanking out like its changing resolutions because it is in fact doing just that. Are you using a DVI to analog converter on the back of your video card? because thats just what it does.
 

4 more replies
Answer Match 70.56%

I did a system scan with Spybot Search and Destroy along with Hijackthis. The computer was working just fine until start up. When everything loads a white blank screen randomly pops up and disappears. The computer is running just fine but it's bugging me what the white screen is cause it never happened before. I restarted the computer a few times to see if I can crash the white screen which I did. It gave me a CPAX20 error. I did some research on it and it says that I must of downloaded an adware which I don't think can be possible because I've been dealing with virus, maware, and adware for years and I can't find anything I've recently downloaded that would have any viruses because I download programs from a friend that's very reliable.

Anyone have any idea on what this is?

(Note: If this is in the wrong section then I apologize before hand)

A:Blank White Screen Upon Start Up

Hi man.
First of all, you need to put ALL system spec. If you don't know it, download and install:

Speccy from > http://download.piriform.com/spsetup101.exe

And let me know the results.
"PLEASE REP ANYONE WHO HELPS YOU"

8 more replies
Answer Match 70.56%

Hey, i had an error message after doing a Non-Destructive system restore called "NTLDL is Compressed" so i do a few more Non-Destructive restores to see if it helped and it never. So i started spamming keys on the restart, i hit F2 a few times after to go to the boot menu and just went to a blank black screen. No it does nothing when i restart, just goes to a blank black screen. Please Help.

A:Black Blank Screen On Start Up.

sounds kind of like a hardware issue, I would start by removing everything you don't need to start the machine, including the CD-rom, floppy, ... PCI devices

1 more replies
Answer Match 70.56%

A while ago, i broke the section separating two usb drives, but it still worked fine, until once i inserted my usb stick, and my computer went off and blew the fuse in the plug. After that, when i turn on my computer, it starts up normally, and when the log in screen should come up, all i get is a blank blue screen, shown in the picture.

Anyone else experienced my problem, or got any ideas how i could fix it? Ive tried starting up in safe mode, but same problem occurs.

More replies
Answer Match 70.56%

Just installed build 10586 and get an error
c:/programdata/microsoft/windows/startmenu/programs/desktop.ink parameter is incorrect.
this came up after the upgrade was completed.
cannot switch back and forth using the windows key also.
Under programs there is no folder desktop.ink there is a desktop but this is a shortcut
at a loss how to recreate this parameter.
Also strange that none of my other three win 10 pro systems has this file either. I did enter this problem also in the IR problems.

shipinomore.

More replies
Answer Match 70.56%

Hi, my desktop's been having some problems recently. When I switch it on, it loads just fine. However when it comes to the point in time where it is supposed to show the blue start up screen with "Welcome", the entire screen turns blank. And it just remains that way. There isn't any start up tone too. I've tried rebooting numerous times in normal and safe modes and nothing. Is it a graphic card problem? I do not wish to reformat, quite a fair bit of my school work is in there, I can't risk losing them... And it's urgent since I have most of my portfolio files in there...

Please and thank you!

Melesa

A:Black/blank Screen At Start Up

Do you have a dual monitor setup currently or in the past?

Do you only have ONE video adapter?

10 more replies
Answer Match 70.56%

blank screen on start up dell 760 on the face of the tower by the on button are green numbers 1 to 4 show up when turned on then show 3 -4 with fan running nothing shows on the screen have used a spare screen to check .using restart switch on the back makes no diffrence or holding the on switch on the front Have tried tapping f 9 pluss f12

A:blank screen on start up cp fan runs

This may help: http://mediawiki.middlebury.edu/wik...

3 more replies
Answer Match 70.56%

Hello friends. This morning I woke up to find that my HP laptop, which I'd left on during the night, had suddenly stopped working. I held in the power button for a while and nothing happened. I unplugged the power source, removed the battery, then put them both back. That didn't change anything either. I've tried holding the power button down a few times. That hasn't helped anything either. I've got it as far as this: the indicator light on the caps lock is blinking. The wifi key (F12) is orange, instead of its usual white. The screen doesn't turn on. I'm not hearing the internal fan ratchet up, which would tell me that the hard drive is working while the screen is not. I've left it sit for a while like this, and I'm not sure what to do with it. I really don't want to send it in to a laptop repair place because, even though I've had it for years, I love it to pieces and want to keep using it. Edit: I tried a hard reset, but it didn't work.

More replies
Answer Match 70.56%

hello, need some help with this because i have never ran across this problem before.

i have a compaq presario running windows vista, believe its 32 bit

when i power on the PC it has the first little loading screen with the compaq logo on it then it just goes to a blank black screen with a cursor blinking in the top left hand side of the screen... and thats all it does...

from what i was told the owners wife was playing some game (a normal windows game) and all of a sudden the computer just shut down they pressed the power button to turn it back on and nothing happens.

i have taken the drive out and put it into another computer and scanned it for viruses and it found a trogen and removed it, but the problem still persists.

i also have the "Ultimate Boot up CD for Windows" and loaded it up and ran a disk check and it ran its course and "fixed errors and checked all files for errors" so i tried to restart and see if windows will load up but still nothing happens. I believe it has something to do with the boot-up drivers being corrupt or even problems with the registry but i am having trouble figuring out how to solve this problem without having to do the last resort and reformat the drive.

any help would be much appreciated.

A:absolutly no start up... blank screen

Take a look, http://search.hp.com/query.html?cc=us&lang=en&charset=utf-8&qt=blinking+cursor%2C+black+screen&la=en .

Louis

1 more replies
Answer Match 70.56%

Hello,

I have a dell xps 710 that is running XP. Yesterday, I was attempting to update a driver and reboot my system and when it came back on all I say was my wallpaper and nothing else. I tried to get task manager to come up, but nothing. I tried a variety of ways to get something to come on, but still nothing. I went into Safe Mode...and still nothing. No icons..no nada.

I keep seeing a variety of things to do in order to try and get it to boot up and am really confused as to which one I should try.

When I put in my recovery disk I get a menu that says to pick the following options:

When I get the "welcome to set up" screen, should I choose

* To set up Windows XP now, press enter

or

* To repair a Windows XP installation using Recovery Console, press R.

Different people seem to be saying different things. I also read that you can go in and do the following:

* Boot from your XP Setup CD and enter the Recovery Console
* Run "Attrib -H -R -S" on the C:\Boot.ini file
* Delete the C:\Boot.ini file
* Run "Bootcfg /Rebuild"
* Run Fixboot

And lastly, my pc told me to put in the service pack 2 data disk. If I download the application at work and burn it to a disk..should I burn it as a bootable disk or just a data disk?

I would appreciate any help. Many thanks.

A:Blank start up screen/No icons

Try this to see if you can get it to boot..

Reverting back to a pre-Service Pack state may help resolve the issue. It's possible that some system files were damaged during the driver install.

Go to this page and scroll down to the section that instructs you on removing service packs from the recovery console.
http://support.microsoft.com/kb/875350

Don't mess with your boot.ini, it's working fine. If it wasn't, you wouldn't be able to boot at all.

7 more replies
Answer Match 70.56%

Hi all. I hope someone can make a suggestion.
My son's HP computer will not start. It gets as far as the Windows XP load screen (with the progress or animated bar on it) and then it goes blank. About 10-15 seconds later the screen remains blank but it starts to play music. The music sounds almost like a game playing. I can't get into safe mode or use system recovery and, of course, he didn't create emergency disks when he got the computer.

The computer is about 2 months old running XP Professional.

Has anyone seen something like this before? Any advice would be greatly appreciated.

Bob
 

A:Blank screen on start up - possible virus?

You could try a 'repair' http://www.uea.ac.uk/itcs/software/xp/xprepair.html
 

1 more replies
Answer Match 70.56%

When the computer is turned on all I get is a blank Screen.The Model is Notebook HP 15 - f111dx with Windows 10   (product number J9H11UAR)

A:On start up all I get is a blank screen. Lights are on

rlyeates Hello;Allow me to welcome you to the HP forums!I read your post about your laptop starting but with a blank screen and wanted to help.Here are some troubleshooting steps you can try:Black Screen Displays with No Error Messages During Startup or Boot | HP® Customer SupportHP Notebook PCs - Computer Does Not Start (Windows 10) | HP® Customer SupportGood Luck========================================================================I am a volunteer and I do not work for, nor do I represent, HP.---------------------------------------------------------------If my posts helped you, please click the Thumbs-Up symbol to say thanks.If my posts solved your problem please click "Accept As Solution".========================================================================

1 more replies
Answer Match 70.56%

I built A computer 2 months ago and it had alot of problomes, so I brought it to staples and they fixed the problom and got it all set up, they said that there was a problom with the ram but it auto coreected it self or something, I also replaced the Hard Drive. So for the past 2 days is has been working but today. I turned it on no prboblom. I installed 4 things, sims 3, Firefox, windows updates, and a usb wirless card. After installing all that I reboted and it still worked. So I shut it down for now. Well I came back to it and rebooted and after the 4 little orbs made the windows icon about 15 seconds after the screen got a blank blue screen and reboot. and I dont want to sound like a noob but BLUE SCREENS SCARE THE CRAP OUT OF ME. I know I'm a wussy but if I have to see another blue scren I'll.... poop my paints XD. but the computer was working I even tested sims 3. I do have the stock fan right now but what would have caused that blank blue screen?
 

More replies
Answer Match 70.56%

Hi , I wonder if someone maybe able to help with this problem please

When I start my desktop PC it shows the first screen and then the next screen where it should be starting up it just remains black apart from a little white line in the top left hand corner flashing like its waiting for me to type something (or what does this mean ? ). This seems to remain here for a least a while as I have waited. I restart the PC and press F9 for diagnostics and all systems are green and then everything boots up as normal with no problems. This has happened the last few days. I noticed I have had alot of Windows updates so I don't know if that has anything to do with it.

I'm using a desktop with Windows 7, I'n not sure what else to add at this stage.

Advice is appreciated , thanks
 

A:Blank start-up screen problem

Boot the computer and repeatedly press F8 while it is booting. A screen will come up that list Repair as the first option. Choose that.
 

2 more replies
Answer Match 70.56%

I have a Dell computer that is about five years old and uses Windows XP. The problem I have is that I will turn on the computer, the Dell logo will appear, and then the screen goes blank right before the Windows load-up screen appears. I am able to access the system menu (F2 I think) as well as the Safe Mode screen (F8). I tried starting the computer in Safe Mode but that doesn't work. For what it's worth, the computer has had numerous problems lately. Sometimes it takes awhile to log in a user and then when the user is finally logged in, the icons don't appear right away. Also I've noticed that my internet has been crashing more often so this latest problem isn't a complete shock. So I was just wondering if there is anything I could do to fix the blank screen problem. Would changing the monitor make any difference?

Thanks.

A:Computer screen goes blank after start-up

Hi Tony, welcome to TSF. If the problem that you are having isn't hardware related, the easiest way to fix it would be to completely wipe the hard drive reformat it and reinstall the operating system. Since it is booting to the logo screen then hardware doesn't appear to be the issue from the information you have given. Tell you what, let me ask you some specific questions for you to answer and I will do my best to help you troubleshoot and correct the problem.

Here are some questions for you to answer that will help me. Just answer them the best you can and if you dont know an answer its ok. If you already answered anything I'm asking in your first post just skip over it.

1). What kind of computer do you have? Laptop? Desktop? Dell, HP, Ect?
2). Whats your level of experience? Novice, intermediate, expert, or dont know squat?
3). What operating system are you using? Xp Home or XP Pro? Which Service pack SP1,2, or 3?
4). What antivirus are you using? What firewall if any?
5) Please tell us a little about your computer. How old is your computer? Hard drive size How much free space is on it?, processor size, ram, video card. Ect.
6). Do you have an Xp disk for this computer?
7). Does your computer have a floppy drive, CD drive, Ect.?
8). Do you have access to another working computer with an internet connection?
9). Did you noticed this problem occuring after installing anything recently?
10). Has your computer done a windows update recently?
11). Have you made ... Read more

9 more replies
Answer Match 70.56%

I've got a windows vista desktop that I have not used in awhile. I hooked it all up today and when I turn it on it sits at a black screen with a blinking cursor in the top left hand corner. Can someone help me get this computer going again? Oh, I should mention I'm not very tech savy, but I can follow directions good.

A:Stuck on blank screen during start up.

Let's have a look at the MBR (Master Boot Record) and see where we go from there.

Step 1: On a working computer, please download the latest version of PartedMagic:PartedMagic Downloads (download the .iso file under the heading "Most people will only need this file:")
Write ( in the appropriate manner) the downloaded .iso file to either CD or USB/flashdrive:Creating the LiveCD with InfraRecorder
Creating the LiveUSB
Boot the problematic computer from the PartedMagic CD or flashdrive:At the first menu with Default settings (Runs from RAM) selected, press <ENTER>.
Be patient while PartedMagic loads into memory, and then displays its Desktop.
Success? Let me know if you can successfully boot to the Desktop of PartedMagic, and whether you are using a bootable CD or a flashdrive.


PartedMagic Desktop version 2012-08-09


Step 2: At the PartedMagic Desktop, open a terminal window:Locate the black screen/monitor icon (ROXTerm) along the bar at the bottom of the Desktop screen (third icon from the left-side edge).
Click on the ROXTerm icon to open a terminal window and at the prompt, type:

fdisk -l

Note: There is a space between "fdisk" and "-l".
That is a lower case L as in Llama and not a ONE.
... and press <ENTER>.
Drag your mouse over the output to select it all.
Right-click somewhere in the area selected > C... Read more

1 more replies
Answer Match 70.56%

I'm in the middle of a struggle with blank screen issue, possibly corrupted exlorer.exe file (won't run). Wanted to try update from 8-8.1 but the Windows Store won't show up with the blank screen issue. Any thoughts on resolutions? I've done several malware, adware scans and antivirus scans. Everything comes back clear. Also, tried adding a new user acct, but get an error message and can't add. Thought the update might replace the needed files. SFC scan return non-fixable errors.
Thoughts would be great! Thanks.

A:Open Windows store with blank screen issue

Hello thb, and welcome to Eight Forums.

See if doing what's in the blue note box at the bottom of OPTION TWO in the tutorial below may allow SFC to repair the files afterwards.

SFC /SCANNOW Command - Run in Windows 8

If that still doesn't help with your Store, then see if going through the listed items in the tutorial below may.

Apps and Tiles Not Working or Responding: Fix in Windows 8

Hope this helps for now,
Shawn

3 more replies
Answer Match 70.56%

Need help I can hardly Open any programs
 

A:Every time I Open Up My Comp Or some Other Program the Screen goes blank

16 more replies
Answer Match 70.56%

My son is in the army in Germany. For the past month, after he enters his yahoo mail name and password, it goes to the next screen, which is blank. it's as if the page will not load. he has tried refresh, cleaned out his temp files, internet temp files, made sure he is using the correct password, etc. I even had him do a chkdsk and defrag. This is the only problem he has and can access the internet and even get his hotmail account. Something has gone awry, but what? He even did a restore and an online virus scan. Any ideas I can pass along to him? He says he has no problem access his yahoo mail account from another computer, so the problem lies with his personal pc.
 

A:unable to open yahoo mail. blank screen??

Has he got javascript enabled? what browser is he using?
 

3 more replies