Need code for power-on password reset Halt code : 94910392 Thank You,JosephMore replies
my halt code is 92524127. i was wondering if anyone could help with this
@dparks06? Enter 234821092 more replies
halt code - 60886816
@cris-sdive Enter 75784238 Regards, DP-K1 more replies
After enter 3 times I received the following code: 62859715
@Zane1? Enter 73731331 Regards, DP-K1 more replies
HP Notebook 2000-- Power On or Admin Password SYSTEM DISABLED after 3 trysSystem Disabled 58363924More replies
I cant open my hp notebook, it keep saying the password is invalid, but i havent changed my password. Please help me. ThanksMore replies
Im not sure if 32 or 63 bit. It wants me ti enter Admin password or Power on Password.
Hi: Type any password you want 3 times, and the PC should generate a system disabled (halt) code. After you get the halt code, see the first post at the link below for how to get an unlock code to enter, so you can get access to your PC. There are also steps to clear the password. http://h30434.www3.hp.com/t5/Notebook-Operating-Sy?stem-and-Recovery/System-Halt-Error-Message-or-BIO?...5 more replies
I need help bypassing a password on an older laptop. I don't want to erase or delete anything off it just recover or bypass windows password. ThanksMore replies
Hi Can anyone help me sort a problem out. I cannot for the life of me remember the power on password and now all that shows is system disabled and a code 69468164 Is there a way to clear the old password??? Any help appreicated
@26kenley? Enter 76540160 Regards, DP-K4 more replies
I vaguely recall that a few years ago, I may have registered that password with a HP rep over the phone, after buying it new. Recently, I left HP an email asking if their records show this. Or how to simply 'reset' a new startup password. HP hasn't responded yet. So I'm asking here please for advice. Including if my (mnimal) personal data may simply be erased; rather that having to erase and reinstall computer programs. Its been quite awhile since I UPDATED IE 8. Would it be easier to install IE 10 instead? Please ask me for any needed details. Thanks good thinkers!
@ThanksThinkers? When asked for the password just hit enter 3 times. Post any code you receive. REO2 more replies
Hello, My Hp laptop 2000 has this error showing: System disabled code 64574901 Can anyone help me. Thanks
@Ancient52? Enter 71452327 Regards, DP-K1 more replies
I need to get past my power on password
Hi, Enter the wrong password three times, with the 8-digit display on the screen, generates one to unlock: https://bios-pw.org/1 more replies
Suddenly today when I boot my laptop, it asked for "POWER-ON PASSWORD" ? I have no clue what it is and I am unable to get in. Model: HP 2510P OS Windows 7 (32) Please help. Thank you.
Hi, Unfortunately, business machines have more stringent security than consumer models - they don't produce 'halt codes', the password cannot be derived from the Serial No. and the code is stored in non-volatile memory so removing the RTC cell will not reset the password in this case. If you Contact HP Business support they should be able to send you a customised SMC.bin file which you can use at boot to reset the password. Regards, DP-K2 more replies
HP 2000 NOTEBOOK PC LOCKED FOR ENTER ADMINISTRATOR PASSWORD OR POWER ON PASSWORD after three tries gives system disabled 86785102
Please try: 39683124 Regards,KNRKI work for HP3 more replies
Hi I?m new to the forum.I was searching on the forum and google,to see if I could find an answer to my problem,but no lucky.
I was using my laptop,then I lost the power,because I use without battery.After that I start having problem with boot sequency,it take more or less 25 minutes to start the windows.And before was just 20 or 30 seconds to boot.When the windows starts it run normal.
Is there something that I could do it? To boot normal as used to be?
I use windows 7 32 bits
Welcome to Windows Seven Forums.
It's possible your hard drive is corrupted as a result of the power loss so you might want to run a check on it as this tutorial explains.
Are you saying the boot sequence has changed? If so, you'll need to go into the BIOS to see what is going on - if you're unsure what to look for just load the default settings - your computer manual should show you how to access the BIOS settings.
I vaguely recall that a few years ago, I may have registered that BIOS password with a HP rep over the phone, after buying it new. Recently, I left HP an email asking if their records show this. Or how to simply 'reset' a new startup BIOSpassword. HP hasn't responded. So I'm asking here for advice please. Including if my (mnimal) personal data may simply be erased; rather that having to erase and reinstall computer programs. Its been quite awhile since I UPDATED IE 8 on this backup computer. Would it be easier to install IE 10 instead? Please ask me for any needed details. Thanks good thinkers!
@ThanksThinkers? When asked for the password just hit enter 3 times. Post any code you receive. REO4 more replies
I recently changed my password for the windows 2000 login, but I could not remember the password. Is there anyway I can do to get to or by pass this log in. I have tried to start with DOS and reformmated the drive, but it did not allow me to go in. I tried to get in DOS by using windows 98 boot disk, and it gives me this message, "NTLDR is missing", I am desperate of using my computer for my tasks. Please help..
Thank you very much in advance.....
Be gentle with earth,
If you have access to another pc, there are numerous windows 2000 password rippers available.
Due to the nature of the sites offering this service: peacefire, astalavista etc, it may be an idea to scan any downloads though.
Can anybody help me with getting into my system since we lost our password? Is it possible for me to remove the battery (does it have a battery?!) to reset the password? Do I need to find some password recovery software? Any help is good help. Thanks for your time.
Please read the rules
i am trying to unlock my sons hp notebook stream after several attempts for power on password i get code 94043648,can anyone help me unlock his notebookMore replies
I dusted off an old Toshiba laptop and found that I have no idea what the password is to enter Windows 2000 pro. What's the best way to get back in?
I'm not sure it's ok to post on this forum. So send me an e-mail and I'll send you the link for software you can download that will allow you to reset the password for any local user account.
I got on to my windows 2000 and forgot the password . The login is administrator. Is there a generic password that techs use to get into the computer
Sorry, but we cannot help you. There is no way to verify your situation and no way to prevent such information from being used by others for illegal purposes.There is no generic password. The existence of such a password would be an enormous security risk and revealing it on a public forum would be highly irresponsible2 more replies
I had very low local hardrive space (300mb) and disk clean wasn't working.So I did a full reset,it failed at 66%.I then turned on my pc and it asked for the power on password,which I entered,it went to the hp loading screen,but then again asked for the power on password(does this repeatedly).So I then tried entering the bios after the power on password and it asked for my admin password,mine didn't work? Please can u help me. I would really like it to be able to reset and use my laptop again.Could using hard reset do the trick,if so how do you do it on my laptop?
After entering incorrect password 3 times you should get a message System disabled and a Halt code. Post that Halt code here to get a passcode for Admin password.http://bios-pw.org/8 more replies
Help! I was reinstalling Windows 2000 Pro (after having to erase the hard drive) onto an 80 GB WD hard drive. During the fourth (final) disk of the installation, immediately after the drive was formatted, power "blinked" at my house. The installation had to be restarted, but it will not complete the fourth disk. error message is "The file ntfs.sys is corrupted. Press any key to continue." Which, of course, does not work but gives the error message at the bottom of the screen "Setup failed. Press any key to restart your computer." This does not work either, you must restart the computer yourself.
Question - Is the hard drive recoverable, and how?
Hi jpease, Welcome to TSG !!
You may have to format again and try to reinstall!! It sounds like when the power glitched, it corrupted the partition. Delete the partition and reinstall
Ok, here's the situation. My boss brought his wife's computer in because it is missing an OS file and cannot load. I tried to repair it using the windows 2000 CD but it's asking for a administrator password. My boss nor his wife have any idea what it is since the requirement for putting in a logon password was bypassed during boot. The person who installed the system no longer works here so nobody knows what the password could possibly be.
In any case I've tried several my boss suggested and none have worked so far...still trying. I've looked for password recovery help on the net but I don't understand any of it.
So my question is; is there a way to find out the password without it being totally difficult? Or do I really need to reformat?
16 more replies
Windows 2000 usually displays the username and password when i want to log on, and i just click OK and go to the desktop. However, upon turning it on today nothing appears, i press enter and it says to enter a username and password, Cancel is greyed out and there is no 'X' button.
I can't for the life of me find the username and/or password and have no rememberance as to the username or password in my head (never needed to remember it).
Is there anyway i can get round it? BIOS changes? password hackers? I really am looking for anything that might work.
Yours in despiration
Try administrator for the username.
I am working on Windows 2000 Server that has a its operating system on RAID 0 setup. Recently, I had forgotten the password to log in and it is very important for me to log back in. I have tried some tools (Namely Hiren's BootCD) with no luck and attempted to re-install the OS but since it is a RAID configuration, I'm not quite how to accomplish this.
Does anyone have any suggestions?
Thank you very much.
We lost the CMOS for this laptop. Getting error code 64915549 after 3 attempt. What's next? I can try to remove the CMOS battery, if I knew exactly where is was! Thanks
@grtech09? Enter 71673589 Regards, DP-K1 more replies
Can't log into Administrator... tried every password I can think of!!!
I know it is case-sensitive, and I have tried leaving it blank.
I can log into user name, but I am very limited to what I can do. I am logged in as a power user...but have no power!
Is there any work around to get into Admin? I really don't want to reinstall.
Appreciate any suggestions.
13 more replies
Two women, who have opened a summer school for pre-school kids, had a older computer donated for their use.
They are unable to boot up and log on successfully in absence of the the user name and password information that is requested by a window that appears early in the boot up process.
The operating system on this computer is Windows 2000 Pro.
I would be grateful for any help you might provide me in step-by-step fashion to solve this problem. I have limited computer technical knowledge, but can follow sequences instructions.
I thank for any help you might provide me.....
6 more replies
have a hp15r given to me by my sister...when i power it on it shows date and time..hit enter and I get blue screen showing her name and wanting password...i have tried numerous passwords she has given me and none work.....no disc for backup available. no hint ever input to recover password......HELP !!!!!!!
Hi: I wouldn't be able to help you get into windows. You are probably going to have to purchase a set of recovery media and reset the PC to its out of the box condition. You can try tapping the ESC key at the beginning of the HP welcome screen, select the F11 recovery option and see if you can factory reset the PC that way. Sometimes you need the Windows password for that too though. However, booting from the recovery media you purchase should work without the need of a password.8 more replies
Hi. please help, I lost the password (power-on password) to your old laptop. what information should be provided? s/n CNU0023NW9; p\n VJ213EA#UUWThank you."halt code": CNU0023NW9
@ElJonson? Enter e9l117f9do ( 3rd character is a lower case L ) Regards, DP-K2 more replies
Have a very old Laptop Compaq Presario C700, Lost the Power on Password and Have a System DisableKey:59085827 Thanks in Advance!! Note: I know its very old, just want to get some old pictures!!
Hi, Enter 46983209 Regards, DP-K4 more replies
please help i have a hp 2000 it begines at a blue screen prompting me for a power on or adminstrator password. after entering the wrong password it read system disable with code-60795584 hope there is help out there for this.
Hi Try this : 756935004 more replies
I made a Google notebook to keep the minutes of a meeting my business partners and I held last weekend. I made them all collaborators on the notebook so they could all make any changes or annotations they felt necessary. However, when they go to access this notebook they are prompted for a password.
There is nowhere (at least that I can find) to even choose to password protect the notebook let alone change the password. I'm pretty confused as to what password the notebook could be. The only thing I can think of is that it's asking for the password to my gmail account, which I don't really want to be handing out. Any ideas on this one gang?
6 more replies
My wife has a two-year-old Samsung notebook. Recently when she unplugged it the machine cut off, even though the battery said 79% charged (it wouldn't charge any further). I figured that the battery was bad so I bought another one from Amazon.
This one charges to 100% percent and does exactly the same thing. I'm perplexed but think there's something going on with the motherboard that won't let it use battery juice, even if Windows 8.1 says it's 100% charged.
I've tried the hold the power button down for 1 min with the battery out trick to no avail.
Any ideas? I'm stumped and think I might need to get her another notebook.
8 more replies
Please guide me through the process of changing Administrator Password of Windows 2000 Server (Where SQL 2000 Server is running having Mixed mode Authentication, with blank SA password). I have once changed it from logon screen (by pressing ctrl+alt+del). But after that my SQL server stopped running (I had blank password for SQL). I couldnot fix the error.
Please tell me both the process, to be followed, while changing Windows 2000 Server password, when the SA password of SQL is (1) Blank (2) is not Blank. Please tell me is there any step to be taken in SQL 2000 Server, after changing the password of the Windows 2000 Server Administrastor?
With alot of good wishes and thanks in advance,
Barun Kumar Tiwari
Dell D600 Lost HDD password, need the SN run through a password generator if anybody can help me out? I know Rustam has one but havent been able to reach him.
I bought a laptop about a year ago. Shortly after buying it, we lost the password before making a backup disk. I couldn't change the password, we run Windows 7, without the old password. Luckily, or so we think, we have one of those laptops that has a fingerprint scanner so I have been able to log on using my fingerprint as a password. However, I can't believe that I am locked out of changing the passwords on this computer.
I have learned my lesson! Always back it up first! But for now, I need some help. I am also a little worried that I may have been hacked into. A friend said that if your password all of a sudden doesn't work, that is a sign of a hacker. That is what it felt like happened to me. I swear I thought I had the password right, then all of a sudden it stops working.
Thanks so much-Bill
Built-in Administrator Account - Enable or Disable then reset your password1 more replies
Have an HP 2000 Notebook that I don't know the adminstrator password for. Error code from hitting enter three times is 58444864 Can someone help me get into this computer so that I can remove the startup administrator password?
@Westwindrv? Enter 475222603 more replies
My PC is soooooo very slow it takes me at least 30 mins. To try to logo to my email or proform any function on this computer. I ready to just give up. Yes, my virus software is up to date. the PC is aHp 2000Notebook PC Vosion AMD
Hi, Try to run a diagnostic test Turn your computer offthen turn it back on and keep on tapping on ESCLook for Diagnostics F2Look for component test, Hard drive test, then click quick check then run once. It will then check your computer's hard drive.After the test it should give you a result if the hard drive pass or fail with a failure id number If the computer pass. Try running malwarebytes to your computer (I know that the antivirus of your computer is updated but we wanted to check if there are virus infection present) Try downloading bios update. Please refer here on how to install the bios update http://h30434.www3.hp.com/t5/Notebook-Hardware-and-Upgrade-Questions/randomly-shuts-down/m-p/5603375... Note: Please disable your computer's log in password just to make sure you won't encounter any locked up issues after bios update by going to RUN then type netplwiz then uncheck the box click apply then enter your password and re enter it (Just dont mind the user)
"Education costs money; so does Ignorance"
I cleared all the files from my laptop and now when i start it up it says "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation." When i click OK and it restarts to do the install the same message comes up and i cannot do anything else besides keep clicking OK. What exactly do i do about this?
kfull Hello;Allow me to welcome you to the HP forums!I read your post about installing Windows and wanted to help -- but need more information. First off, WHY are you trying to install Windows? If this is because you are trying to reset the laptop due to problems, we need to know that. Second, what version of Windows are you trying to install? Third, please follow these instructions for providing the detailed product number of your laptop: http://support.hp.com/us-en/document/c03754824?jumpid=reg_r1002_usen_c-001_title_r0001We can proceed once you provide the information.Thanks1 more replies
I have made back up discs when i bought this pc, But with the Windows 10 , I am not given the choice to do a Restore. My PC keeps flashing on alot of the pages, Im running Norton security and Malware Bytes, and nothing has been found. I need to find a way to restore this back to the way it was when i bought it. bought in 2013 , and it had windows 8 , 64 bit. Thank you Dee33
Dee33 If you did the Win10 Upgrade and are now trying to revert back to Wion8, I have some bad news for you. While Microsoft tells you that there is no risk in the Win10 Upgrade, because they let you believe that you can always revert back to your original OS and setup within 30 days, the ugly fact of the matter is that the Win10 GoBack function has proven to be unreliable -- and when it fails, it can leave machines in a corrupted state -- which doesn't always happen, but it does happen often enough to be a problem and you won't get any warning in advance that it is going to trash your PC!The Win10 Upgrade is know, in some cases, to corrupt the Recovery partition stored there by the OEM that built the original machine. This pretty much guarantees that no HP Recovery is going to work. So, any attempt to use F11 to do a restore is doomed to failure. Are you trying to use the Recovery Disks, by booting from the first one, and they are not working? If so, what is happening when you try to use them? We can proceed once you provide the information.Thanks1 more replies
enter adiminstrator password power up password code is system disabled 4854806F can't locate the secondary battery to reset to factory settings
Try this574200681 more replies
Right before this problem happened, I had suddenly experienced a weird screen glitch and knew to restart my computer. Now, it asks for a BIOS admin or power on password which I did not set. What the heck is going on, and what could I do to fix this?? --WHAT-I-HAVE-TRIED--I have tried "12345"I have tried a blank fieldI have tried "biosPower"-------------------------- --COMPUTER-INFO--Product: HP Stream Notebook 11 (no touchscreen)Product version: 8.1 (x64 architecture)---------------------- If I need to put any more info, just ask.
@GlitchMasta47? At the password screen, hit enter 3 times and you should receive a halt code - enter this on the site below. https://bios-pw.org/ Regards, DP-K9 more replies
When I try to turn on the laptop it says "enter administrator password or power on password" then when I try the only passwords I know for my laptop it says "system disabled 86381856". I don't know what to do or how to fix it and I saw that on a few other threads you were able to help people with the right thing to type in and was hoping you could help me as well cause I'm going crazy trying to solve the issue!! Thank you so much!!!
Hi, Enter 39089298 Regards, DP-K1 more replies
Hello Friends... I buy a HP Notebook 2000 few weeks ago but unable to install XP in my notebook It has Windows 8 Preinstalled but i want to install XP as Secondry OS like as in D drive or E drive but Every Time A eror Show up After Loading Startup File From Windows XP Disc??Please Help me in Installing XP inMy Laptop, This will be very help for me...Thanks!!!
When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue. The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. It will be necessary to set the SATA settings in BIOS to IDE mode. If your computer doesn't support this option, you will need to "slipstream" SATA / AHCI drivers into the Windows XP disc using a utility such as nLite OS. Please click the white KUDOS star to show your appreciation8 more replies
Hey, I am going to be starting college in september and am starting to look at notebooks. I want the best one for gaming under $2000..My coice would be the HP dv9000t series..Is this the best bang for my buck? Any suggestions? I'm planning on waiting as long as possible to ensure I get the lowest price with the best hardware available, so I have a lot of time to shop around.
i need to know if it is normal for a fan to be turn on all the time on a hp 2000 notebook?
Depends on the settings. You can change it to be always on or always off via the bios, or the system settings in windows. But if you set it to always off, the fan will turn on either way if the cpu gets over 70c2 more replies
I downgraded from win 8 to win 7 and i am missing sm bus controller. Please help. hp 2000 notebook pc amd e300 with Radeon tm HD graphics SM BUS CONTROLLER hardware id:
Please and thank you, Emman_uel
For some reason HP didn't included all Win 7 drivers for that model on their site which is weird.
Try this link to find your chipset driver:
First one on the list should suit you.
HiHave a Good DayI want to upgrade my notebook RAM(4GB to maximum)see my system details belowThanks Mohsin Rasheed
° Hi !, @MohsinRasheed: Welcome, to Forum !, See, this link ... http://www.crucial.com/usa/en/compatible-upgrade-for/HP-Compaq/hp-2000-2d22dx5 more replies
I was working on my homework last night, I noticed the battery was getting low but kept typing anyways. I plugged my computer BEFORE it completely died on me, as I was typing, it shut down. I pressed the power button and nothing happened. I unplugged it and plugged it again and nothing. It has been working fine for the 3+ years that I've had it. Please helpMore replies
Hello Helpers I've HP 2000-2d09SE Notebook PC Product number F0E23EA and I need some information About Mother Board and Ram Slot And HDDI Need to Upgrading My Laptop and I want to add some More Ram Memory to it Like 4gb ,although it 've 4gb and want to add more 4gb to it .is this possiable ?if yes ! then suggest me some Brands for Ram And HardDriveMore replies
hi i have a dead laptop, the only light that turns on is that one from the adapter when i pluggit
there's no other sing o electricity when i press the ṕower button
i already open it and nothing is disconnected
i have a multimeter, what tests can you recommendme before i buy a new motherboard?
I already tested the button with the continuity beep sounding only when i pressit and make a contact between the 1st and 3rd contact in the ribbon cable, but in the 4th and 6th contact the beep sounds even if im not pushing it, is this normal? maybe because of the light that comes in the button?
im still learning trough internet to repair computers, and i bought an multimeter, what other tests can i do to the motherboard?
i ve been searching for information or videos but there arent many of laptops, but i cand upload images of the motherboard if someon cand help me?
thanks i hope you have understood my english im still learning!, thanks for your time.
the model is hp notebook pc 2000, and i still dont know what could happened to this laptop because it was fine before this happenned.
6 more replies
@teddyb74 Enter 48722090 Regards, DP-K1 more replies
when i try to start my laptop it showing error (ENTER ADMINSTRATION PASSWORD OR POWER ON PASSWORD)
Harry Enter 467623146 more replies
Hi, I work at a pawn shop, and we have a problem we have never encountered before. This laptop, which is cleared and is now for sale in the shop, now asks for an administrator password or power on password. It did not do this when it was brought in, nor when it was pulled from the back. We were going to power it on for a customer, and it just started asking us for this password. I have seen in another post that you enter through it 3 times to get a code, so here is the code:61987774 Any help on this would be greatly appreciated. Thanks
Please try this Password = 74685370 Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,KNRKAlthough I am an HP employee, I am speaking for myself and not for HP3 more replies
Enter administrator password or power on password the system disabled number 53352373
@wagidogg? Enter 42030975 Regards, DP-K4 more replies
I've tried just about everything, removing the bios battery and all that and it still pops up prompting me for a password. Can anyone help me out? After three wrong password attempts it locks out to a message saying "System Disabled " Thanks in advanced.
@iToa5t? Enter 44121499 Regards, DP-K4 more replies
System disabled, 63547877. Please help, Thanks.
Hi, Please enter 72425279 Hope this helps.2 more replies
Pls help me am new here if I turn on my laptop mini I was ask to enter administrator password or power on password, I tried it three times and I code this code:63777861Help plsThanks
Hi: Enter this unlock passcode... 726552671 more replies
my HP Pavilion m6 you turn on just says administrator password or power on passwordI have never set one is password is there a master reset code
Try to turn it on three time in a row. The BIOS should display a set of numbers while it informs you that the system is locked. Post the numbers and letters if there are any and I will see if I can help you out.9 more replies
Hp pavilion g series . System Disabled .55748040
Product Name: Hp pavilion g seriesOperating System: Microsoft Windows 7 (64-bit)Hp pavilion g series . System Disabled .557480402 more replies
When I turn on my computer I get a blue box that says enter administrator password or power on password. After 3 attempts I get the code 69419016. What can I do?
Hi, Enter: 76571038 Regards, DP-K7 more replies
System Disabled![ 88007110 ]
@Jammer88 Enter: 37965136 Regards, DP-K3 more replies
Enter administration password or power on password hp 15-af114au review windows 10
Enter administration password or power on password hp 15-af114au review windows 103 more replies
Administrator password or power on password and disabled number is 60649346
Can somebody help me please2 more replies
Can anyone help me?
Enter the computer's serial number in the following link to generate a key.http://bios-pw.org/P.S. Dosnt work in all cases.1 more replies
Recovery Bios Password COMPAQ PRESARIO CQ61 Operating System: Microsoft Windows 10 (64-bit) Hello, I have an COMPAQ PRESARIO CQ61 and suddenly is asking me for the bios password. The message that appear is "ENTER ADMINISTRATOR PASSWORD OR POWER ON PASSWORD". What can i do? After failing 3 times I get the message "System Disabled" and the code 59329588
Please try - 46081508 Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee3 more replies
I Home School both my children and I currently only have 1Laptop to use and need the one that my 4 year old turned off and now its asking me for the adminstrative or Power on password? This Has CREATED A Huge problem My computer is asking me for a Power On Password/Admin Password. I Don't Remember this password or where I would have written it down. Is There another way to access my system without taking it in and it costing me a ton of money for someone to do something as simple as Inputting a simple pass key or something ? Please someone anyone help me if you can.... Thanks So Much THIS IS THE CODE IT IS GIVEN ME after 3 Failed attempts******52199612******
OH MY GOODNESS !!!You are my life saver thanks so very muchThat (I'm sure you already know worked)Thank You Thank YouG_B_Y_3 more replies
I am locked out because I forgot my power on password. I am recieving the code: 50659329 upon 3 failed attempts. Thank you.
Thank you so much! You're a life saver.3 more replies
I forgot my password the screen on start up says enter administrator password or power on password. When I enter it wrong 3 times a new screen appears system disable.  please help I need this fixed asap. I use my computer for both work and school
Hi, Please try: 76872880 Regards.10 more replies
I need help Spoiler (Highlight to read)Spoiler (Highlight to read)Spoiler (Highlight to read)error cod 60753518enter administrator password or power on passwordsystem disabled 60753518 error cod 60753518enter administrator password or power on passwordsystem disabled 60753518 error cod 60753518enter administrator password or power on passwordsystem disabled 60753518
@AbdallhHussein? Enter 75631538 Regards, DP-K4 more replies
This is first time I experienced my lap top asking for Administrative Password or Power On Passwor, but I have neither of them. I tried some passwords and they didn't work, and I search on line for this issue and someone was saying to try 66665891 but it did no work eiher. After trying a few and it gave this error of system disabled withthe code 53578094. I turned the laptop off a few times and tried again but the system disabled code is the same as 53578094. Would you please direct me how to get this around so I can have the laptop on? Thanks and appreciate your help.
@Hphasit? Enter 42450010 Regards, DP-K3 more replies
administrator password or power on password hp
@Stl20brock? When asked for the password just hit enter 3 times. Post any code you receive. REO8 more replies
Get error message "Enter Administrator Password or Power On Password"Have tried multiple codes from online support and hasn't worked.
Hi: You can't try any of the BIOS codes posted on the forum for your notebook. You have to enter your 8 digit system disabled code in the box at the link below, to generate an unlock code. You should get a system disabled code after entering any BIOS password 3 times. https://bios-pw.org/ If you get an alphanumeric code, you will have to contact HP for assistance.1 more replies
When I turn on my computer it asks for the administrator password or power on password. I forgot it and entered something 3 times and got a system disabled message with code 843448331
Hi, Enter 31022215 Regards, DP-K4 more replies
Enter administrator password or power on password after 3 tries I get a 76392325 code. Please help.
Hi: Enter this unlock passcode... 690909011 more replies
enter administrator password or power on password hp.. please 60156263
@rekinashu? Enter 758348652 more replies
I recently got a computer from a pawn shop and it says I need an administrative password it is a pavilion dv7-1261wmP/n is nm295ua#abaProduct key is 3w78r-cx4gc-27xxq-tqry7-j246kPlease helpMore replies
My halt code is 67281019ive tried admin, [blank] but does not work, is there a way to fix this problem?
@mazdau? Enter 78189039 Regards, DP-K4 more replies
hello, I have a hp stream model number 11-d010wm. that my kid has forgotten the password. im not sure why but it now wont let me do a system recovery or even get in to the bios. ive tried all the F keys during start up and nothing. all i get is a message saying enter administrator password or power password (which i dont know). i try some random passwords and eventually i get a system disabled screen with the error message saying [ i 54723220 ]. please let me know if there is some sort of solution for this. i dont need anything on the computor so just wiping it fresh would be fine if nessessary. thanks, chad
@dahc1991? Enter 416818062 more replies
I have HP 2000 Notebook. I am getting an error of 601 and I need to replace the battery but when I look for replacement 993553-001 I find both 4400 mAh/48wh and also 6600 mAh 71/wh. I have also seen lower ah/mah numbers. Will the higher mAh batteries be ok for my HP Notebook? Not sure which one to purchase and your help will be more than welcome. Thank You, Sandra1947More replies
I NEED TO BOOT MY HP 2000 NOTEBOOK PC . BUT I DONT KNOW HOW TO BOOT IT USING CD ROM. CAN U GUYS HELP ME SOLVE THIS PROBLEM
Hi, Insert the installation disc and Shutdown the notebook. Tap away at the esc key as soon as you press the power button to enter the Start-up Menu and then select the Boot Options Menu ( f9 ). Use the arrow keys to highlight the CDROM option and hit enter - if prompted to 'Press any key to continue....' - do so. Regards, DP-K1 more replies
HP 2000-2201TU Notebook PCSerial Number: [edited Serial Number by Moderator]Product Number: C0P21PA[edited Product Key by Moderator]
Please send me drivers link for windows 7 (32-bit), and windows 8 (32-bit)
on my mail id [edited email by Moderator]
Hi: Your model is only supported for W7/W8 x64. You can use the W8 drivers and software directly from your model's support and driver page. http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5305... You can use the W7 x64 drivers and software from this model on yours. DO NOT USE ANY BIOS OR FIRMWARE FILES FROM THIS MODEL http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5275...5 more replies