Tech Problem Aggregator

Lenovo Y510P external displays

Q: Lenovo Y510P external displays

Hello! I'm using my Y510P with an external display and thinking about buying another one, so here's my question - how many displays are supported by the GPUs? According to the ark.intel.com, my CPU supports up to 3. Is it including the laptop's screen? I'm planning to use ONLY two externals. Specs:i7-4700MQ755M SLI16 GB RAMWin10 x64Benq GW2270

More replies
Answer Match 63%

My Lenovo Y510p isnt working, Im on my phone but ill show a video of whats happenning: https://youtu.be/d1nhfJ3PUZ0So my laptop will only turn on for a few seconds before shutting back off and then trying tobshut back off. I cant go into bios, it still crashes after a few seconds. Also a weird thing is itll be stuck in that restarting loop until i plug my charger in and then it just wont turn on at all? It first happened a few months ago but i took it to the shop and they said i was working just fine. Worked for another month, and then did it again, and then it lasted yet another month now doing thia again. The same thing every time. I had it worling yesterday, somehow it just started spontaneously working, and then after shutting it off today it started to loop again. I dont know whats wrong with it??

More replies
Answer Match 63%

My adapter was burned, and my computer has only one graphics card.Now I want to add another graphics card so I need to buy exactly the same adapter 120W?And where I can order new adapter.I am from Israel. thx

More replies
Answer Match 63%

Hi, I have two question : 1. I bought a caddy for lenovo y510, but my Sandisk Ultra 2 ssd is only reconize as sata 2. Is there a sata3 or sata2 support? Is there any problem with caddy? 2. Also I was wondering if I can install a M.2 SSD. My laptop is still in warranty, I didn't open it. If yes, is worthy for daily use to sell my Sandisk ssd for a M2 ssd? Thanks!

More replies
Answer Match 63%

I bought one of the first Lenovo IdeaPad y510p. Having a dual gpu made for a lot of gaming fun. Yesterday, the room filled up with the smell of an electrical burn. I checked the underside the Lenovo. It had been hotter. I heard workers outside my window and figured that the smell may come from them. A few minutes later very thick smoke came out of the left air vent and made a column in the air. I quickly pulled out the power cord and battery. Luckily, the house is still standing. I understand that electronics eventually fail. Yet, this seems unsafe and dangerous. What if I weren't in the room to act quickly? There should be some way to report this. The support page to send a message has been down with an under maintenance message for days.

More replies
Answer Match 63%

My Lenovo Y510p isnt working, Im on my phone but ill show a video of whats happenning: https://youtu.be/d1nhfJ3PUZ0So my laptop will only turn on for a few seconds before shutting back off and then trying tobshut back off. I cant go into bios, it still crashes after a few seconds. Also a weird thing is itll be stuck in that restarting loop until i plug my charger in and then it just wont turn on at all? It first happened a few months ago but i took it to the shop and they said i was working just fine. Worked for another month, and then did it again, and then it lasted yet another month now doing thia again. The same thing every time. I had it worling yesterday, somehow it just started spontaneously working, and then after shutting it off today it started to loop again. I dont know whats wrong with it??

More replies
Answer Match 63%

Hello guys, Im using Lenovo Y510P with the following specs:4th Generation Intel Core i7-4700MQ / 16GB RAM / Full HD 1080p 1920 x 1080 / 1TB HDD + 24GB SSD / Dual SLI NVidia GT750M 2GB / Bluetooth / CamI got this laptop from my brother, and i use it to play Counter Strike Global Offensive (CSGO) game. I have seen this laptop getting around 250fps in most of the maps in CS GO, but still I am getting only 124fps in every map with low settings. Can any of you guys suggest any tips to correct this?  Thanks in advance  EDIT: Does installing the OS on the 24 GB SSD affect the gaming performance in any way? My SSD got damaged and there is no SSD in it currently. The is only the HDD.

More replies
Answer Match 63%

Hey, I bought Lenovo y510p laptop like 2 weeks ago. It is the SLI version of the y510p. The laptop worked just fine when I was playing with it, ran CSGO and Skyrim on Ultra settings over 60 fps. Couple days ago, my friend broke my charger, and I went to Walmart to buy a new one. I bought the Duracell charger which is 90 watts and it was compatible with my laptop. Then I plugged it in, and tried to play csgo but the fps was like from 5 to 15. I have no idea how this happened. I also took off my battery and just tried to play it without it and just charging the laptop, and when I opened csgo the laptop shut down. I already made virus tests and there was nothing in the viruses. Please help me if you can, I really wouldn't want to send this to the warranty since it's brand new and propably gonna take atleast a month. Thank you already!
Specs:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 8
RAM: 8138 Mb
Graphics Card: NVIDIA GeForce GT 755M, -2048 Mb
Hard Drives: C: Total - 913054 MB, Free - 795269 MB; D: Total - 25599 MB, Free - 16086 MB;
Motherboard: LENOVO, VIQY0Y1
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
 

A:Lenovo y510p slow fps

My guess is that the Charger may not be compatible with that laptop....90watts yes but has it got the correct DC output.

Also you didn't say how your original charger got broken. like was it attached to the laptop at the time?

What could be happening is..when you plug the new power supply in it is not the correct power your PC expects so it disregards it and runs off the battery at lower everything. As when you take the battery out it will not run at all. Easy place for damage is where the power plug goes into the laptop.
 

1 more replies
Answer Match 62.16%

Need ur help. Laptop was working perfectly. No problems. No issues. Yesterday after shutting down laptop, it not getting START. When i pressed power button, its power led and battery led lit up and nothing goes up.(Even optical drive tray and keyboard's backlight )Only the BLANK screen shows up. I have tried hard reset method but its not working and my laptop isnt in warranty period. Please help me.

A:Lenovo Y510p laptop won't start

Hi Adil,
 
Welcome to Lenovo Forums.
 
Kindly perform Power Drain and set BIOS default:
Try turning off and removing the battery first. With adapter charger unplug, press Power button for 15seconds to drain power inside.  Plug in adapter charger and press Novo button instead of the power key to turn it on for the Novo Menu  Choose BIOS setting  On Exit tab , load optimal default then Y then place battery back before save changes and exit.
 
Let us know how you get on.
Regards,
Shashi
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

1 more replies
Answer Match 62.16%

I just want to comment on this - because I'm having the same issue.  I've used the laptop for a number of months without crashing issues, and it seems to have cropped up pretty recently.
 
I think it might have something to do with the driver version?  It also only seems to happen with certain games.  In particular, War Thunder and GTA4.  I play Dota 2 quite a bit and don't seem to have any problems at all.
 
 
2/2/15 EDIT: This post was moved for escalation purposes. Amy_Lenovo

A:Re: Lenovo y510p GT 755M SLI Problem

Hi,I have a problem when playing any games with SLI enabled. Games crashes at random times, sometimes even after ~5mins. So at that specific time the screen goes black and the game minimizes (or I try to minimize it by myself). After that the message pops out saying "Display driver stopped responding and has recovered". I have latest Nvidia drivers (v344.11). I'm running Windows 8.1 x64. The problem occured with any version of display drivers I've installed so far. 

9 more replies
Answer Match 62.16%

I have the lenovo y510p (59370015). It has a disk drive in the Ultrabay. Does this mean that there is no Nvidia graphics card in the laptop? If this is the case, then why are there a bunch of Nvidia files on it? If this is not the case then how do I get the card working, I see it with a Error Code 43 in device manager.

More replies
Answer Match 62.16%

Hello, I just bought a new y510p laptop few days ago. It works fine for frist 3 days. Now, when I turn on the laptop, it stuck at lenovo logo screen and then restart. The recovery key doesnt work as well, it also dispay lenovo logo and then restart. I really appreciate if anyone can help, thanks

A:y510p stuck at lenovo logo

Additional information: I don't connect any external device. I cannot access BIOS using F10 key

9 more replies
Answer Match 62.16%

Hi folks I'm new to the forums to please excuse me. I'm currently posting from my phone so when my laptop comes on I'll attach the debug file.

Basically I set my laptop to sleep instead of shutting it down and when I went back to resume my work (about 20 hours later) it was running very slow.

I was searching for my 'Calculator' but made a typo so I tried backspacing the letter but nothing happened. Chrome (which I had opened at the time) was unresponsive and so was my taskbar.

I waited a while to see if anything would happen but nothing did so I forced shut down.

I left it off for almost a half hour and when I put it on I got that error 'Unmountable_Boot_Volume' and it needed to restart and so it did but then the error came up again this time it did an automatic repair which lasted a few seconds then it was diagnosing which lasted a few seconds and then I got the following message:

Automatic Repair
Your PC did not start correctly.
Press restart to restart your PC which might sometimes fix the problem. You can also press Advance options to try other options to repair your PC.

I clicked restart and it did.. I got a black screen for a minute or two but I got to log in. But once again everything was moving slow so as the start menu seemed to be working I shut down the laptop. (It's currently off)

Can anyone assist me with this problem?
It would be really good if I can actually find out what's really wrong with my laptop.
Thanks.

P.S. See attachment

A:BSOD Unmountable_Boot_Volume Lenovo Y510P

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

For this crash, I suggest you follow the tutorial below for troubleshooting.
If you have any question, please ask them.
Troubleshooting stop 0x7B and stop 0xED. - Windows 7 Help Forums

3 more replies
Answer Match 62.16%

Hello 8-forums.

I'm posting on behalf of my little brother since he isn't the sharpest when it comes to computers. Today his computer started freezing and crashing out of nowhere at completely random times. I couldn't pinpoint an activity he was doing which might have caused it.

On top of that a pop-up kept coming up on his screen about his screen driver having crashed and has been restored. I happen to have the same laptop and I've had this problem for a week or 2 too, but nothing happens when it shows up on my screen (unlike his, where it crashes the computer). His screen now also has blue matrix-like lines all over his screen as a result of todays crashes.

I asked him to send the Zip-file from the DM log collector tool. He only had a BSoD once and he didn't notice the error code. The rest were freezes (forced to restart) and crashes (no BSoD screen).

Hope you can help find a solution to my brothers problem.
Regards Jens and Walther

A:Lenovo Y510p - Freezing/Chrashing

Hi Snejxjens,

Welcome to the 8forums.

Please remove some files to increase the free space to at least 10-15%.
Every partition needs at least 10-15% free space so Windows can do its thing in the background.
   Warning
Less free space could cause BSOD's

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from the manufacturer.

Code:
1: kd> lmvm nvlddmkm
start end module name
fffff801`86694000 fffff801`872ec000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Mar 04 12:07:52 2014 (5315B408)
CheckSum: 00C20523
ImageSize: 00C58000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Please run a threat scan with Malwarebytes*, a full scan with your AV, scan your system with Adwcleaner, Kaspersky TTDSKiller and ESET Online Scanner
*(Uncheck trial version in the installation process)
Remove Spybot

5 more replies
Answer Match 62.16%

I have the lenovo y510p (59370015). It has a disk drive in the Ultrabay. Does this mean that there is no Nvidia graphics card in the laptop? If this is the case, then why are there a bunch of Nvidia files on it? If this is not the case then how do I get the card working, I see it with a Error Code 43 in device manager.

More replies
Answer Match 62.16%

I am trying to fix some things on my laptop. Everytime I enter the serial number on the lenovo website, it comes up as the number not existing. I am reading the same number off my laptop as the bios. 

More replies
Answer Match 62.16%

Dear Lenovo family! I have bought this laptop (Y510P) around the end of December 2013. I have just decided to write these after long time of having issues with gaming. Also tooday I have just changed my Hard drive to SSD with booting windows 10 64bit from scrach hoping that it would all come to an end however it did not. -I have updated all the software, drivers etc. I have uploaded a RAR folder including my Nvidea system information, speccy system screen shot and all the logs from event viewer.  Now here is the problem I am having. When I start playin a game (For instance CS:GO) at first it is all good:-As soon as I run the game SLI gets activated.-Fans starts getting faster and both graphic cards getting warmer.-After 10-15 minues of gameplay, game freezes, screen gets minimized for 3-4 seconds and eveything freezess then games screen comes back and another 1-2 seconds game freezes then starts back on.- Problem repeates after another 10-15 minutes of game play. What  could be the problem?Could it be CPU speed is not properly working?Could it be because of the Graphic cards? I will be waiting for your help! Thank you all!  

























Evrim system info.rar ?26 KB

More replies
Answer Match 62.16%

I purchased my Y510P back in Q2 2014, it was already on Win 8 when I purchased it. Everything was working fine even after the  SLI issue with  Win 8.1 which was fixed through a BIOS update that was available here in their product support page. During that time I worked more on other things and didnt really notice anything about the GPU and its update. I was able to update my laptop to Win 10 (back in Q4 2015) and I'm currently unsure if it already installed the anniversary update. Recently, I tried some few games and noticed that the second GPU seems not be working during any games I've launched. I ran Unigine Heaven Benchmark and seems that the SLI is detected, checked the device manager both hardwares are detected, and updated to the latest GPU driver. But still seems to be not working. Any help will be highly appreciated. Thanks.

More replies
Answer Match 62.16%

Hi all, I have the lenovo y510p SLI 750m version and recently (2-3 days ago) my cpu fan on the left side of the laptop stopped working with the dust removal tool. I removed the lid and I can see both fans spinning just fine, however only the right one actually performs the dust removal when prompted. The other one stays queit and I don't feel any air pushed out of the left side. I can feel it on the right like normal though. Any ideas on how to fix this? 

A:Lenovo y510p Dust Utility

Hi sifuraga , 
 
Greetings. 
 
You can initially power drain the system , turning it off removing the ac adapter and battery then pressing down the power button for 12 seconds . Start the machine using the Novo button (page 82) to launch the Novo menu for BIOS set up and set BIOS defaults f9 save and exit F10. Check the BIOS version.
 
Check how it goes else proceed with uninstalling and fresh installing the Lenovo power mangement tool . Restart and recheck . 
 
Update us how things go. 
 
Regards

1 more replies
Answer Match 62.16%

Hi there. I'm just hoping that I can find the solution as soon as possible. So I tried playing some casual games yesterday and all of a sudden the game froze and the image started tearing apart. Next thing you know it, the screen went blank. So I force shut down it and reboot, but after the Lenovo logo, the screen goes blank. There's a faint glow, but there's no image or cursor. Could it possibly be that the GPU crashed and there's no graphic to power the display? Or should I try entering Recovery Mode or Safe Mode to switch the display graphic to Intel HD? Besides, how do I enter Safe/Recovery Mode since I'm on Windows 10. Any help would be much appreciated.  

More replies
Answer Match 62.16%

Hello guys,  I bought my Lenovo y510p for months ago, tried with several SLI games to run those. They all crash, and returns the screendriver has stopped working. I have the y510p with GT 755m sli. Any solution for this?? If I run without SLI all is working good.   

A:Lenovo ideapad Y510p SLI Crashing

Have you updated your video card drivers with the latest drivers from the Nvidia website?  Have you monitored your GPU temperatures to see if either of your GPUs are overheating?  You can try using GPU-Z to monitor your GPUs while gaming.

9 more replies
Answer Match 62.16%

BSOD-xperts:
I've suddenly been afflicted with BSOD's on my Lenovo Y510P running Win 8.1. Everything was fine until about 2 weeks ago and then I started experiencing multiple BSOD's to the point that I had to boot in SafeMode. After doing some research, it looked like the issues were related to video (NVIDIA GeForce GT 750M) and wireless/bluetooth drivers. I upgraded all of those and everything was fine for a week until this morning when I got another BSOD. After looking for the bug check that it reported, I stumbled on this forum and saw some excellent responses so I thought I'd give it a whirl. I downloaded BlueScreenView and ran that and I've attached the output. I have also attached output from the MiniToolBox tool. I also tried to upload the mini-dump files but I get a message saying I'm "not permitted to upload this kind of file" but I'm happy to do so if I'm allowed to.  Here is a link the output from the Speecy tool as well - http://speccy.piriform.com/results/j7BzfFXyiX3xHgrhWQqHjXV. Would someone be so kind as to give it a look and let me know your thoughts? Thanks!
 

 

A:BSOD in Windows 8.1/Lenovo Y510P

Can you please upload the whole minidump so I can examine it?
 
It is located in C:\windows\minidumps. Select the most recently created file.

3 more replies
Answer Match 62.16%

I am trying to fix some things on my laptop. Everytime I enter the serial number on the lenovo website, it comes up as the number not existing. I am reading the same number off my laptop as the bios. 

A:How to find S/N or IMEI of Lenovo Y510p

Hi liberate26 , 
 
Welcome to the Community Forums.
 
I believe you have the right Serial Number as described here on how to find it .
It may be that at the moment support server is currently on update with the database as here in this recent discussion.
 
You may call in tech support for further assistance or you may send me the your SN in a private message as this should be confidential, and things you would be needing.
 
Update us as soon as convenient for you.
 
Regards
 

1 more replies
Answer Match 62.16%

Hi Guys, I have Lenovo Y510P with Windows 10 and i recently installed a new MyDigitalSSD 256GB in the M.2 slot (instead of the 24GB cache ssd) and i'm using the ssd as my main drive for OS and programs. I'm getting reandom freezes during regular operation, I can still move my mouse duriing those freezes but that's it, it won't unfreeze unless I do an hard reset.. Those freezes happen only when the OS is running from the SSD, when I'm I run a copy of that OS from the HDD, it doesn' happen ad everything works. Before installing the ssd, every cache software was uninstalled and i even tried a fresh new clean win10 install on the ssd but the freezes still happens. I read and tried LOTS of solutions (checking for errors in the ssd, disabling SLI, disabling LPM, etc.) but nothing helps. I'm really desperate for a solution, Doesn any one has an idea on what is the problem? 

A:Lenovo Y510P with a Windows 10 on SSD randomly fre...

what i understood is that slot you got there isnt meant for a big SSD :/ so thats probably why os freezes some times it's a cache slot meant for small sized ssd cache drives if understood it right.

7 more replies
Answer Match 62.16%

Hello!So my laptop is out of warranty and a few days ago i noticed that the sound quality from speakers is decreassing. I than realized that only the right speaker is functioning very poorly (i can bearly hear it and its making crackling noises). Than i reinstalled the audio drivers - nothing changed. So that must mean that the right speaker is dying! Where can i get the spare parts and which ones do i need? Thank you! Jan

More replies
Answer Match 62.16%

Hello everyone,  I bought a y510p about two years ago and for the first year it worked flawlessly then one day it wouldnt start up. What would happen is it would try and boot up and show the Lenovo message then go into the novo boot menu and after 1-2 in that menu it would crash no matter what option was chosen and would keep doing it over and over. It also would only do it if the A/C cord was NOT plugged in. If A/C power was plugged in it wouldnt start at all. I gave up on it for about 9 month and it sat in my closet About 3 days ago i tried it again and it booted up fine no problem, did windows updates, restarted multiple times and no problems until today where it shut down and reverted back to what it did before. Any ideas? I am stumped and believe there might still be life in it.  Thanks! 

More replies
Answer Match 62.16%

Hi there,I've got lenovo y510p(with sli) about 6-7 month ago.I'm trying to play cs go but while im playing with sli on, game is crashing ( something like stucking or teasing i should say, and then there being bzzzzzz sound on the background just like when you are trying to change resolution). Im being able to press ctrl+alt+del and close the cs go or sometimes it doesnt even let me do it so i gotto close pc with power button.As far as i know its not happening on other games.My all drivers are up to date.I monitored the both graphic cards' heat and and they are usually 60-65C degree.Power charger is 170w.At this point I don't know what to do. I was looking for an answer for this problem in internet but couldn't find one. Can you please help me? Pc Specs Os :Win 8.1 pro 64bitBios: InsydeH2O Version 03.73.0674CN44WW(v3.05)                Processor: i7-4700MQ 2. 40 ghz           Ram : 8gb              Graphic cards : 2xgt755 one's brand is samsung other one's is hynix

A:Lenovo y510p cs:go is crashing while playing on sl...

Hi AnnoyingPear,
 
Welcome to the Forums      
  
As per the query we understood that you are facing issue with system crashing while playing games in your Lenovo Y510p laptop.
 
As you have mentioned that this issue does not occurs in other games, please uninstall the game and reinstall and check for the issue as this looks like it is a issue with the game.
 
Hope this helps. Do post back if the issue persists!                                                   
 
Best regards,                                                          
 
Ashwin. S




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter... Read more

9 more replies
Answer Match 61.74%

Hi,about a year ago I bought a lenovo y510p and in the beginning I was really pleased with it. It handled games just fine and I never had problems while gaming.All of a sudden, my gaming performance was really bad: really low fps on the settings I used to play on, even on the lowest settings it doesn't get to very playable framerates (BF4, FarCry 4)I didn't do anything to my laptop, he is still plugged in, power management is on high performance, Nvidia drivers are up to date..I've been having this problem for about 2 months now and I'm starting to be really annoyed by it!Helping me would be greatly appreciatedThanks in advance-Arthur

A:Poor gaming performance on lenovo y510p

Check for overheating using HWMonitor?

9 more replies
Answer Match 61.74%

I connect my phone to my laptop (windows 8) and initially it pairs just fine. Both my computer and phone say it is paired. After about 15 seconds my computer shows it as disconnected but my phone still says paired. When I try to send a picture from my phone to my laptop it obviously fails, even when I try to send it right away. I updated all the bluetooth drivers and I am still getting the same problem

A:Phone keeps disconnection from bluetooth on lenovo y510p

Either your computer is shutting down that connection after 15 min's or it is your phone. It helps to know what OS the phone is running and which mfg & model of phone you are using.

7 more replies
Answer Match 61.74%

Hi Guys, This is something that has been bugging me for almost a year now and I've just been really lazy to solve the issue.The problem is because for some reason, unknown to all except Lenovo, they decided NOT to support Windows 10 for a couple of the laptop models that they had in their product line when W10 was launched. Just my luck, my Lenovo Y510 (Model No - 20217) is among those unsupported PCs and hence there are certain features that no longer work.(Laptops-and-netbooks :: IdeaPad-Y-Series-laptops :: IdeaPad-Y510p-Notebook :: 20217 - Lenovo Support... As you can see, nothing for W10)PC Specs:- Lenovo Y510P (Model No - 20217)- 8GB RAM- NVIDIA GeForce GT755M- Windows 10 Home, Version - 1511- Intel Core i7-4700MQ CPU @2.4GHzThe issue that I'm facing is that my Webcam just wont work. Issue that I can see:- The light adjacent to the webcam on the laptop keeps coming on and going off and then finally just stay off (each time I try to use the camera)- Skype and other applications that need my camera can no longer detect it. Initially, my video keeps on appearing and disappearing until it finally just goes and stay disconnected, as though I don't even have a camera.- Error message on my Camera app when I try to open it: "We can't find your camera. Error code - 0xA00F4244(0xC00D36d5)- When I go to my Device Manager, there is no list called "Imaging Devices" as a whole. There are number of users who have faced this issue and there seems to be no proper solution for this. For s... Read more

A:Lenovo Y510P (Unsupported for Win 10) Camera Drive...

Something you can try is to do a clean install of Windows 10, and use the generic built-in drivers that come with the operating system.Create a live USB of Windows 10 using Rufus or burn the *.iso to a DVD after you download if from https://www.microsoft.com/en-in/software-download/windows10

2 more replies
Answer Match 61.74%

Hey everyone,
 
I bought a Lenovo Y510P laptop yesterday and it is extremely slow. It takes quite long to start up, simple tasks such as opening the control panel will freeze it for a about 30seconds. I haven't dared putting any demanding software on it (apart from Chrome and McAfee (paid subscription)).  My 6-year old Toshiba P300-17R is faster, which is completely ridiculous. I have no idea why it is this slow. Could anyone point me in the right direction for fixing this annoying problem? 
 
Lenovo Y510P-00303NL
8GB RAM, 4th gen Intel Core i7-4700MQ, NVIDIA GeForce GT 755M, 1TB HDD + it was running Windows 8, now updated to 8.1
 
Thanks so much!
 
(p.s. I wasn't sure in which sub category to put this and I thought it might be a Windows 8 problem - sorry if this is the wrong forum!)

A:Brandnew Lenovo Y510P extremely slow

Hi cultblonde, and welcome to Bleeping Computer.
 
You posted that you purchased the computer yesterday.  Is this a new computer under warranty?

3 more replies
Answer Match 61.74%

Hello, where i can get recovery media for my Lenovo Y510P laptop, when my recovery partition is damaged. Can anybody help me? Does anybody have original Recovery disc or someting, where i can install clean OS? If you can help me, please contact me. Its possiable that we can share media with Google Drive or someting. Thank You!Contact: Email: [email protected]  

A:Lenovo Ideapad Y510P: How to get recovery media?

If you mean the factory recovery files try Lenovo for a recovery disc set if available. If you mean for the OS alone just download the MEDIA CREATION TOOL from microsoft which you will use to download the OS installer. As to drivers go to the download site for your unit to download them.

3 more replies
Answer Match 61.74%

Hello.I am the owner Lenovo IdaePad y510p Intel i5 4200m.Not so long ago I bought a i7 processor 4810MQ.Both the i5 4200m and i7 4810MQ work on the Socket G3 also known as RPG 946B/947 or FCPGA 946 but with the difference that the intel i5 4200m has a TDP of 37W and Intel i7 4810MQ has a TDP of 57W.So after update the BIOS to version 3.08 willingly I took up the replacement processor.To my surprise, after an exchange with i5 to i7 4200m 4810MQ laptop will not turn on, for a short time (1 to 3 seconds) shone on the white button "power" but immediately afterwards extinguished.I suspect that it is a voltage input to the processor, but the BIOS is not possible because the feature voltage change is not visible / hidden. I hit it on:https://www.techinferno.com/index.php?/forums/topic/3546-lenovo-y410p-y510p-unlocked-bios-wlan-white...but it seems to me such output last resort, and I wanted to ask what to do now.I do not want to believe that the 300W power supply does not could handle the additional 20W per processor.What to do in my Lenovo IdeaPad y510p to use Intel i7 4810MQ?I'm sorry for his handling of English who constantly grind.Thanks!!!

More replies
Answer Match 61.74%

Hey y'all,I bought a driver caddy, this one:http://www.gearbest.com/hdd-ssd/pp_274547.html Also, i upgraded the internal HDD to an SSD and that works perfectly. The problem is the HDD in the caddy. Windows 10 won't recognize it in device manager and disc manager. Any help or ideas? Did i buy an incorrect caddy? Any help would be great!

More replies
Answer Match 61.74%

Good evening, I will keep this short, I have a Lenovo ideapad y510p with Windows 8.1 (I got it with 8.1, did not upgrade from 8) . I noticed a problem yesterday, where I cannot adjust the screen brightness. If I use the keyboard commands (Fn + Up and Fn + Down) The slider appears on the top left of the screen, as always, but does not ?slide? It stays static.  If I move the slider on the Setting menu, I can slide the value but the brightness does not change and the value is not reflected on the slider on the top left of the screen. I am not sure when this happened for the first time. 











Solved!
Go to Solution.

A:Lenovo y510p with Windows 8.1 brightness slider no...

Never mind, restored from last valid restore point and now it is working

2 more replies
Answer Match 61.74%

Hi all. I just bought my Y510P from a guy on craiglsist who had barely used the laptop. (Like turned it on once and then put it in the corner for a year and a half)  When I got it, the guy had restored everything to the factory settings which was just Windows 8.1. My first problem is that the computer keeps defaulting to use the HD 4600 instead of the 755M that I have set as the default graphics card in NVIDIA Control Panel. I disabled the 4600, but then the computer was super slow. Any idea why this is happening? My second problem is that I can't find anything to speed up the fans so that the computer will automatically overclock the i7. I'm tempted to slowly force it to overclock and have the fan speed increase with the temperature, but I'm afraid that I'm going to break something that way.  If anyone knows of a way to control the fan speed then that would be great. Thanks. Computer specs: Lenovo Y510Pi7-4700MQ8GB RAM1TB HDD24GB SSD (PCIe)Intel HD 4600 Graphics and GT 755M

More replies
Answer Match 61.74%

So since christmas is coming, I was thinking it would be cool to upgrade my 8gb RAm to 16gb My question is: what kind of memy card I need to my lenovo ideapad y510p? and do I need to change my old memory card aswell if im buying new one? Also is it easy to change those RAM cards ?











Solved!
Go to Solution.

A:Lenovo Ideapad y510p - memory upgrade

They're RAM sticks, not cards, and they're fairly easy to change out. I would suggest looking for something in the 1866mhz speed, though I think you need lower voltage memory. So I'd get something 1.35v or lower.




___________________________________________________________________________________________________________________Lenovo Ideapad Y500 | IntelŽ Core? I7-3630M @2.4GHz | 8GB 1600MHz DDR3 RAM | NvidiaŽ Geforce? GT 750M | 120GB Mushkin Atlas Deluxe mSATA SSD | 1TB Samsung Spinpoint M8 5400RPM HDD | 1080p Lenovo Display | IntelŽ Dual Band Wireless-AC 7260

9 more replies
Answer Match 61.74%

Hi all. I recently obtained a used lenovo y510p from a friend with the following configurations. Windows 8.1 ProSLI capable with 2 geforce 750M cards6gb RAMItb Hard disk2gb dedicated video memory. It plays games at decent speeds with medium settings but I get different errors from each of the 3 games I've tried. For dragon's dogma dark arisen, the game suddenly slows down for a few minutes and picks up speed again after a few (maybe 5) minutes. With mass effect 2 the game screen hangs, while sounds and music continue as normal. ctrl alt deleting and pressing esc will make the game proceed as if nothing ever happened. Finally, for the witcher 3: wild hunt, I get the windows display driver has stopped responding error. The games are properly purchased and as far as i know, so is the OS. I've tried all nvidia display drivers between and including 347.09 to 364.72. I've tried closing all other apps, and ending all nv processes in the task manager. I've also tried different power plans and different nvidia power management modes. I've been monitoring the temp with HWmonitor and it usually tops out at around 81c which I understand is fine for this particular laptop. I even have a targus chill mat to help regulate the temp. Lastly, I've spoken to my friend and he doesn't remember having those issues at all, but he never managed to game with the laptop very often. Any help would be appreciated, this is my first lenovo product. I pereviously owned a dell xps.

More replies
Answer Match 61.74%

So this morning I woke up like usual and start my laptop up. It took a while like usual to boot up then it went straight to the your computer needs restarting blue screen and I thought hmmm this happened a few times and usually gets fixed. This time it went not to the home lock screen but the trouble shooting blue screen after picking my language and type of keyboard. Then it goes to two options "advance options" or "shutdown" I go to advance settings then there were 3 more options. Refresh settings, reset settings or advance options so I chose refresh cause I didn't want my files to get erased since I haven't backed them up yet. I click refresh and a message says that my drive where Windows is installed is locked. And it told me to unlock it and try again. So how do I access this? I forced shutdown but the same thing happens for a few times. Now I'm worried about this problem. Can anyone help me before I actually have to reset my laptop?

More replies
Answer Match 61.74%

Hi, I've been having troubles with my laptop screen. Upon reopening my laptop from sleep mode, the screen remains black instead of loading up the login screen. I've plugged in an HDMI external monitor and it displays fine so I know it is the laptop screen. Also if I restart the laptop, the laptop screen works fine. I've tried updating graphics drivers and adjusting external monitor options (Win+P) but with no success. Any suggestions on what I should do? I've had this laptop for a while now and there is no valid warranty.Thank you

More replies
Answer Match 61.74%

I have a Lenovo Y510p with 2x GT 755m cards in SLI. When playing games like WoW the MAX GPU temps on Card 1 reach 90°C. On Card 2 85°C.At this point the game starts to stop responding. The screen will go black for about 1 second andthe laptop's fans will slow down for just a moment before the game resumes and the fans go back up.This will happen pretty much any time the temps hit 90°C again. I have a Notepal U3 laptop cooler with 1 fan on each GPU intake slot and 1 on the center of the laptop.I have also repasted the CPU & BOTH GPUs with Arctic Cooling Silver 5.I have modded the bottom case of my laptop to allow more air into the laptop.The BIOS is also modified (so are the GPU BIOSes) To stop the crashing I tried upping the voltage on both cards by 012.5mV - 025.0mV. This didn'twork at all. Games always seem to stop responding when temps get to 90°C. However my laptopshouldn't even techinically be getting this hot in the first place. I'd rather max temps to sitaround 80C. This laptop has always run pretty hot and I've always felt like I got a lemon as others haveexplained to me that their laptops don't get anywhere near as hot as this. As such I have some questions for other Y510p users: 1. What are your MAX temps whilst doing some extensive gaming?2. Have you repasted your CPU & GPU?3. Have you modded your Y510p fan intakes to allow for more air?4. Do you use a cooler?5. Do any of the games you try and play ever stop respo... Read more

A:Questions about Temps for ALL Lenovo Y510p Users!!

???? ?????? ?????. ????? ??????? "IntelŽ Extreme Tuning Utility". ? ?????? ??????????. ?????? ??????? ??????? ?????? ?????????? ? 3.4 ?? 2.4. ??????????? ??? ????????? ? ?????? 75 ????????. ???? ???????? ???????, ??? ???? ??????????? ????? ?? ????????. ????? ? ?????? ???????, ??????? ??????? ???????? ??????? ?????????, ????? ?????????? ?? ?????????????.????? ? ?????? ?? ??????:https://download82.files.attachmail.ru/6A32D1112DF94C2093B85DBB64A206D3/6f0a2098da09b88c3e7588cc5723...

1 more replies
Answer Match 61.74%
A:Disk usage of my lenovo y510p always 100% ??? Plea...

that issue is related to windows 8 so i would recommend you upgrading windows 8 to 8.1 through windows store and it should stop the disk usage 100% and make it normal again

9 more replies
Answer Match 61.74%

I never had this problem before until recently I noticed that my fan was making this loud buzzing noise. It was bearable at first. I thought that the fan might be dusty inside because I haven't cleaned it ever since I bought it. Last week, I tried to open the laptop so I can check why it is making that loud noise. I saw that the fan was dirty. I tried cleaning it. When I turned on my laptop, it was still making that loud buzzing noise. So I just ignored it. After a week, It suddenly got louder. It didn't sound normal anymore. I tried restarting the laptop but it still makes that noise. Its annoying. I took a video so you can hear what my fan is making.  It just keeps doing like this even if my laptop is just on stanby, like I'm not doing anything with it. This is what it sounds like when I did the Dust Removal tool on Energy Management.   Since I kept using the Dust Removal tool.. Now its making this weird noise, like the fan is getting stuck on something. I don't know what to do anymore. Its been 2 years since I bought this laptop so I don't have anymore warranty and I never had problems with my laptop except for today. I have never dropped it so I don't know why this is happening to my laptop. Please help me.   











Solved!
Go to Solution.

A:Lenovo Y510P fan making really loud noise.

Hi there, Xbelleh -
Thank you for writing in to the Lenovo Forum - happy to have you here today.
 
This video would leave me to believe that a piece of paper or other debris shifted inside and is now coming in contact with the fan blades.
 
When you use the dedusting cycle the debris is temporarily being blown out of the way of the blades.  What I would do is use a can of compressed air and blow out the fan assembly from both directions and see what is blown out.  Compress air is available at any office supply store, electronics store or big box discount store.  When using the compressed air use short bursts as an extended burst may damage the fan's bearings from over revving. 
 
Also, when using the laptop take note of its position.  If the fan is quiet on a flat surface, but is noisy when sitting at an angle like on your lap.  That might be a good indication that the fan bearings are failing. 
 
Worst case scenario is you need a fan replacement.  The fan is something that the owner can replace if you are comfortable working inside it.
 
As a do-it-yourself project it can be fixed in an afternoon. At this point I would try the compress air and we'll go from there.  
 
Update us how it goes.        
 
 
 
 
  
Regards,
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please ... Read more

6 more replies
Answer Match 60.9%

Hello.

I have a Lenovo IdeaPad Y510p and it has erratic BSOD behavior, usually after sleep mode, but not always. Would love to get to the bottom of it and appreciate any help you can provide!

I've attached the necessary file as per the BSOD posting instructions.

Thanks,
Alexander

A:BSOD on Lenovo IdeaPad Y510p, after sleep mode usually

Only 48 Windows Updates installed. Most systems have 60 to 80 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Don't worry about the specific number, it's just important that you have checked and installed any updates that were available.

The memory dumps blame usbccgp.sys, but MSINFO32 lists ks.sys (kernel streaming of video driver)
And this seems to happen during a power down event (such as power off/hibernate/sleep/etc)

Finally, what applications do you delay using Startup Delayer?
What USB devices do you have connected?

I'm concerned about your version of Diskkeeper as it dates from Jan 2013 - well before Win8.1 was released.
Can you update it? If not, please uninstall it while we're troubleshooting.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

You may not find an update for this one, if so, just leave it be:
LhdX64.sys Mon Jan 11 10:06:58 2010 (4B4B3E92)
Lenovo HD Disk Driver
http://www.carrona.org/drivers/driver.php?id=LhdX64.sys

You should be able to find an update for this one:
tap0901.sys Thu Nov 24 13:50:27 2011 (4ECE91F3)
TAP-Win32 Adapter V9 or[br]OpenVPN driver or COMODO
http://www.carrona.org/drivers/driver.php?id=tap0901.... Read more

11 more replies
Answer Match 60.9%

As I explained in another thread. When I attempt to boot into Safe Mode, only a black screen appears and rarely the safe mode background flashes for a second. I'm able to move my cursor around, but that's it. I do not understand why this is happening and what I can do to remedy this situation. I would appreciate any type of help. Thank you. 

A:Lenovo y510p Windows 8.1 Safe mode won't boot.

I'm wondering if the graphics adapter used on the computer is not compatible with the generic VGA drive Windows 8.1 uses for safe mode. Has the driver for the graphics adapter ever been updated? I noticed this on the specs. If you have the model with the two adapters, it's possible they conflict with the safe mode video driver. I saw a post where the computer had both an Intel and Nvidia adapter.
Dual (2x) NVIDIA® GeForce® GT755M 2GB (on select models) via Ultrabay
Single (1x) NVIDIA® GeForce® GT755M 2GB
I'm not sure it would make a difference but what happens when you disable Secure Boot and Fast Boot in BIOS. Does it let you access safe mode then?

4 more replies
Answer Match 60.9%

Hello, I only found out after purchasing the Y510P laptop that it for some strange reason does not support 5Ghz networks, only 2.4Ghz. This results in me having insanely slow connection every single night around peak hours (7-11pm), and I'm unable to do anything like watching movies, playing games or download stuff. Does anyone know exactly how to upgrade the wireless card on this laptop so it supports 5Ghz networks? Do I have to go out and buy another wireless card, or is it software upgrades like drivers only? I'm not a computer major so a walkthrough would be appreciated. Thanks.

More replies
Answer Match 60.9%

Hello, I have been using a Lenovo Y510p since the beginning of 2014. It worked perfecly fine till a couple of weeks ago when it suddently turned-off while I was watching a video. From then onwards, it wouldn't start. Novo button or power cycling wouldn't help either. Since it is out of warranty, I took it to Geeksquad to see if they can diagonize the issue quickly but I was said the problem could be deep rooted and it needed thorough trouble shooting. I came home and started disassembling the unit part by part (Take out Hard Disk, Optical Drive, RAM, Wifi Card etc) to see if I could isolate the problem but the laptop simply wouldn't turn on. Suspecting that the mother board could be the problem, I purchased an used motherboard on ebay and swapped the existing one with this and assembled all the components back to their place. This time, when I power on, the keyboard would glow and I can see the heat dissipating fan spinning but it would spin for like 3-4 seconds and then it would stop and the laptop would power off. Then the laptop would start again, the fan starts spinning and stops after 4 seconds and this enters into a loop. All this while, the screen is totally black and doesn't display a thing. F9 or any other buttons are of no use. Novo button is of no use either. The laptop enters into the same loop with Novo button too. Would this mean that my CPU has given up on me? I request your kind help! Thanks,Shyam

More replies
Answer Match 60.9%

Hi everyone, I've had a Lenovo Y510P with SLI 750m's for about 1 year and 3 months now. 2 weeks ago (around the time I upgraded to Windows 10). My laptop suddenly is unable to boot for the most part.When I press power, it hangs on the initial blank screen, with no logo pop-up. I have managed to get it to boot before, just simply by restarting over and over, but it's been 3 days and no luck now. It simply stays on a blank screen (no backlight), though the keyboard and power button light up. Here are the steps I've taken to troubleshoot:-> Removed battery, unplugged AC, performed "fleeting power removal" by holding the power button for 60 secs (have done this multiple times)-> Removed RAM, changed slots etc. When there is no RAM, the machine will continuously reboot-> Removed HDD, reseated-> Removed 2nd GPU. When the 2nd GPU is plugged in, the fan will try and spin every so often-> Unplugged connectors to wi-fi module-> Restarted many times-> Pressed the NOVO button, it simply brings it to the blank screen Any advice would be much appreciated. The laptop itself is in good condition, and has little physical ware. Unfortunately it's no longer under warranty, and I'm sure the cost of sending it in is quite high. 

A:Lenovo Y510P not booting, blank screen on startup

If you boot without the HDD, what happens?

5 more replies
Answer Match 60.9%

I have a lenovo ideapad y510p and everything was fine until for I thought I'd do the battery reset in the lenovo energy management,at first the battery was dead and laptop wouldnt turn on,,I found one way around this which is that first I take the battery out and then insert the ac adapter,the laptop turns on then I put it in hibernate while I insert battery after which it seems to charge but only after I do these steps,but if I take the adapter out and insert it back in,it would stop charging.this is all because of the lenovo energy management software battery reset.I've uninstalled it but it doesnt work.any suggestions?I'm guessing one of the steps after full charge during the battery reset the battery gets drained where it says "plugged in and not charging" until it reaches zero is the problem.

A:lenovo ideapad y510p ac adapter battery problems

 

8 more replies
Answer Match 60.9%

From about 3 weeks ago, my Lenovo Y510p (GT 750M Sli, purchased in 2013) started to make this weird grinding/buzzing sound at random times on the CPU side of the fan. It was barely noticeable if I had headphones on at first, but starting from the second week the noise and vibration of it grew louder. After doing some research for possible fixes, I have tried the method openining Energy Management and running the Dust Removal feature to temporary solve the problem. However, that method only worked for about a week, and starting from the third week the buzzing remains very consistent even after I run Dust Removal several times. Does anyone here know what is the problem exactly? I know for other models, people have been able to solve the problem by updating their BIO driver provided by the website. But all Y510p users seen to have that problem early enough to just get a refund or send it back for exchange/repairment using their then still active warranty. I would like to know if there's any way that I can fix this without having to spend money for the fix when it is proven it is the company side issue since even fresh new purchases of the same model ran into the same exact problem within days. 

A:Lenovo IdeaPad Y510P CPU side Buzzing Noise

Bump. (Not sure if we allowed to bump here, if not I apologize)

2 more replies
Answer Match 60.9%

Hi Guys,

This is something that has been bugging me for almost a year now and I've just been really lazy to solve the issue.

The problem is because for some reason, unknown to all except Lenovo, they decided NOT to support Windows 10 for a couple of the laptop models that they had in their product line when W10 was launched. Just my luck, my Lenovo Y510 (Model No - 20217) is among those unsupported PCs and hence there are certain features that no longer work.
(Laptops-and-netbooks :: IdeaPad-Y-Series-laptops :: IdeaPad-Y510p-Notebook :: 20217 - Lenovo Support (US) As you can see, nothing for W10)

PC Specs:
- Lenovo Y510P (Model No - 20217)
- 8GB RAM
- NVIDIA GeForce GT755M
- Windows 10 Home, Version - 1511
- Intel Core i7-4700MQ CPU @2.4GHz

The issue that I'm facing is that my Webcam just wont work. Issue that I can see:
- The light adjacent to the webcam on the laptop keeps coming on and going off and then finally just stay off (each time I try to use the camera)
- Skype and other applications that need my camera can no longer detect it. Initially, my video keeps on appearing and disappearing until it finally just goes and stay disconnected, as though I don't even have a camera.
- Error message on my Camera app when I try to open it: "We can't find your camera. Error code - 0xA00F4244(0xC00D36d5)
- When I go to my Device Manager, there is no list called "Imaging Devices" as a whole.

There are number of users who have faced this issue and there seems to... Read more

More replies
Answer Match 60.9%

This has been an exhausting day! I've been trying to figure this out for quite awhile.

To start, I'll post some information.

My webcam was working fine yesterday! I tried doing a system reboot to the the week before that and alas the issue prevailed. My internal webcam is not being registered by my laptop!

So the solution that seemed obvious enough was to check my drivers, update them if necessary. Which I ended up doing. Alas, the issue prevailed.

Checking the device status, I received the error "Currently, this hardware device is not connected to the computer. (Code 45)

To fix this problem, reconnect this hardware device to the computer." The device is currently registered as 'Unknown device' as I uninstalled the driver. I was receiving the same error when I did have the original drivers though.
Looking up what the error means, it meant that the device was disconnected. I'm not entirely sure how this could happen though with an internal laptop. I also need to get a new copy of the drivers (Which don't seem to be registering the device upon installation).

Anyway any help would be appreciated as this has become a huge headache for me, and i just want to skype with my friend!
 

A:Need help with internal webcam drivers for Lenovo Ideapad y510p.

It might be that the webcam has failed if everything else has been tried.you can take it somewhere and have it looked at but im not even sure they can be fixed when they go. it might be cheaper just to get an external webcam such as a logitech.
 

1 more replies
Answer Match 60.9%

I have a Lenovo 510p running windows 8.1. It did an automatic update after restarting it showed a BSOD for less than a second then went into startup repair. It said "Startup repair couldn't repair your PC" it had a spot to display a log file location but it was blank. When I tried to refresh it said "The drive where Windows is installed is locked. Unlock the drive and try again". Reset said "Unable to reset your PC. A required drive partition is missing". System restore said "To use system restore you must specify which Windows installation to restore." I only have one Windows installation. When I ran chkdsk it said (https://drive.google.com/file/d/0B24yfUwZYyCQRWtySHlyc2plNEk/view?usp=docslist_api) when I did chkdsk /f it said (https://drive.google.com/file/d/0B24yfUwZYyCQZHlQNFlFWmN2WGc/view?usp=docslist_api). I ran the Lenovo system restore and it restored back to factory settings, but still won't boot. If I connect the drive to another computer I'm able to see all the files but it won't boot on the other computer either.
Thanks in advance,
Branson

A:Lenovo Y510P Won't boot, Disk write protected

Hi Branson,
 
After restoring to factory settings do you see any error during the boot process?

11 more replies
Answer Match 60.48%

Hi everyone - I have 2 issues with my y510p (it's a little less than a year old, so with the warranty coming up I figured I may want to get some second opinions).The first is that recently, say within the last month or so, it has developed the habit of rebooting for no discernible reason and with no warning.  It will just snap to a black screen instantly.I've done a full refrresh of my Windows 8. I've run all the validation tools I could think of (hard drive/mem/OS files/etc.) There's nothing particular evident in my event viewer except for this in my system errors:'The description for Event ID 0 from source GeneStor cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.If the event originated on another computer, the display information had to be saved with the event.The following information was included with the event:GeneStor driver startedGeneStor driver started (2)'I believe they are connected because before the crashes started to occur the Onekey Recovery application would start randomly opening multiple instances of itself.' As an addendum, it also appear that I am getting kernal-power event 41The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.---- The other issue which may or may not be related is with... Read more

A:Lenovo y510P - Random Reboot and Power Button Issu...

So as a heads up for anyone else that might be encountering either of these issues - I called support just now and I'm sending it off for repair.  Bit of a bummer since this is my work machine (thankfully I have my t500 from college still kicking around to use in the meantime). Tech support was really nice and quick. Didn't make me walk through the diagnostics/troubleshooting I'd already done which is refreshing. Hopefully this is just a fluke because apart from these issues I really like this machine (and as I said, my thinkpad is rock solid.)

4 more replies
Answer Match 60.48%

I am currently running the 358.50 version of GeForce drivers, however there are newer ones available (361.43). For some reason when I tried updating, my system got really unstable and eventually blue screened with KERNEL_SECURITY_CHECK_FAILURE. When I rebooted it was fine, until I tried to use a graphics intensive application (Photoshop) that caused my laptop to switch from Intel HD to NVidia. My computer locked up and crashed again. I booted into safe mode and rolled back the driver, but I need to install that driver eventually as I use this laptop for gaming and Photoshop.

Maybe another driver needs to be updated? Maybe it's my Intel driver? I couldn't find any issues comparable to mine so I'm assuming there is a conflict I can't find. Thanks for any help you can give me, I don't know much about how drivers work.

A:NVIDIA Driver causes system instability and BSOD in Lenovo Y510P

Exact same thing has happened to me with a Lenovo Y410p. I did a Windows 10 update yesterday and updated my drivers including my Nvidia driver and since then I have gotten three KERNEL_SECURITY_CHECK_FAILURE BSOD when running graphic intensive applications like Photoshop or Illustrator. Today I did a fresh install of Windows to see if it fixed the problem and as soon as I tried launching a game I got the elusive orange screen of death with the same error.

0 more replies
Answer Match 60.48%

Performed a regular windows update earlier tonight, and ever since my Y510P has been completely unable to detect any wireless networks. I've performed a system refresh, and tried updating my drivers but it still can't detect any wireless networks. The problem is likely not with my router as I'm able to connect to it with other devices. Thanks for your help

More replies
Answer Match 60.48%

Hey guys, I am having a weird problem with my Lenovo Y510P, there's a LVDS cable which connects the motherboard to the lcd. When I disconnect this cable, the system boots perfectly and I can see the desktop when connected over hdmi to TV. However when I connect it back, the laptop doesnt even POST, no lights, no fans, nothing. I am unable to find the source of this problem, is it the LCD that's dead or some component on the motherboard? A short somewhere? 

A:Lenovo Y510P doesnt POST when LVDS cable connected

My first guess would be a short in that cable since it probably gets flexed alot (if it is the one I am thinking of), and they are pretty cheap. NEW LVDS CABLE FOR LENOVO Y510P 1080P FHD LCD LVDS CABLE VIQY1 DC02001KT00https://www.aliexpress.com/item/NEW-VIQY1-DC02001KT00-LVDS-CABLE-FOR-LENOVO-Y510P-HD-1080P-FHD-LCD-L... Good Luck,

1 more replies
Answer Match 60.48%

Hi,  My ~3 year old ideapad purchased from Newegg seems to have gone south. I have Windows 8.1 installed. Last night I shut it off to bring it to class and when I got to class and tried to boot up, it wouldn't finish starting up, would sit at the logo screen for about 30 seconds before shutting down and starting over. The fans power up like it is going to start. It repeats this loop indefinitely. I tried holding the reset button next to the charger port and still nothing.  Suggestions?  Thanks 

More replies
Answer Match 60.48%

Hello, Last week i received my Y510P from a reseller here in Lithuania, and ran into a *slight* problem.When playing more demanding games (though i wouldnt call borderlands 2 a very demanding game), the screen freezes and the sound hangs. Occasionally the display would turn pitch black (sometimes the drivers just reset with screen backlight still on). I checked memory, sshd, cpus and main gpus for errors, but none were found. I have no idea how to test the ultrabay though... Temps are pretty high, but definetly not critical. CPU runs below 85c under load, main gpu runs at around 75c, only ultrabay runs hotter, but i've seen people saying that theirs run above 95c and it still works fine. Mine usually crashes when it reaches 91-93c. It reaches those temps in about 30-60 minutes, steadily heating up.  I tried removing and re inserting, but it didnt have any effect. Im stumped. Sorry for rambling on so long. I hope somebody can help me pinpoint the problem, and maybe help fix it. Thanks. System specs:Win 8.1 proIntel core I7 4700MQ 2.4ghzNvidia GT 755m SLI8GB ram1TB+8gb SSHDAll drivers are up to date. 

A:Lenovo Y510P 755m SLI ultrabay crashes nvidia serv...

It seems that re-pasting the ultrabay, and increasing TdrDealy to 8 fixed the problem, but i believe it's something more serious than that...

9 more replies
Answer Match 56.28%

Hi, It has been very difficult to find the proper driver for my wireless card, after a lot of tries and several driver updates, I think I finally found one that is working, but not completely doing what it is supossed to, I mean, the card is actually displaying available networks, but it can´t connect even with the correct password. I´m running Windows server 2012 as a development enviroment, I´ve donde the proper feauture installation to get the WLAN service up and running, but no connection is being performed. Do any of you have vad the same issue? 

More replies
Answer Match 55.44%

Hi, I have a Lenovo X1 Carbon running Windows 10. I would like to connect an external monitor and my only option seems to be using the HDMI port and using a HDMI to VGA cable. I plug this into a Philips 24" ext monitor and nothing I try can get me to
duplicate or extend my display. I just get a message on the ext monitor of "Check Cable Connection". New cable, and new laptop.
How can I even check, if the HDMI port is enabled or is there some other hidden switch / setting / feature I need to turn on first. I have tried the display settings and 'Detect' but nothing.
Any thoughts please. 
Kind Regards,
David

More replies
Answer Match 54.18%

I have an HP Pavilion and 2 TCL televisions that I use as monitors. I can connect to one or the other using WIGI but I would like to duplicate my HP screen on both televisions. Can this be done wirlessly or via HDMI? Thanks

More replies
Answer Match 52.92%

I have a Dell XPS L521x with Intel 4000 graphics as well as Nvidia GeForce GT640M. I currently only have one external display using the display port and I want to get a 2nd external monitor but I'm not sure if I can. I have read elsewhere that Intel 4000 graphics only supports up to two displays whether or not one of those is the internal display. So since I have a dedicated graphics card am I able to go up to go up another display? If you need more information let me know. Thanks!

A:Can I set up 2 external displays and my internal display?

I found the answer to my question. I went into control panel and looked at my display setup and my external monitor is using the Nvidia chip so I have expansion room for one more monitor.

2 more replies
Answer Match 52.92%

Enheter:Thinkpad W541 with:Intel HD Graphic 4600 (Driver date: 17.07.2015 / version: 10.18.15.4256)Nvidia Quadro K2100M (Driver date: 05.11.2015 / version: 10.18.13.5445)Windows 10 Docking station Two xternal displays.1. Nec 22" screen connected to docking with DVI. (This screen is working fine)2. BenQ 32" screen connected to docking with DP. Tried both DP ports. (Model BL3201-B) (Not working) Problem:The laptop doesn't display on the BenQ monitor. Screen says: Can't find signal or something. Tried:1. Disconnecting the DVI cabel connected to the NEC. Still no picture on the BenQ.2. Tried the other DP port.3. Tried changing to many diffrent resolution.4. Restart the laptop and closed the lid.5. Clonning the screen with the laptop.6. Only show the picture on the BenQ. Still no picture. Started Nvidia Control panel. Looked under PhysX. It show that BenQ, Nec and laptop screen is using the Intel Hraphic card. Nothing uses the Quadro card. So i'm to believe that if I got the BenQ screen to use that card. It would work. Because when i Borrowed a HP latop with docking and connecting to the BenQ with DP. The BenQ screen is working perfectly and are using the Nvidia Quadro K4100M card.The latop is using the Intel HD Graphic 4600 card. Any Solution for this?

More replies
Answer Match 52.92%

Brand New ProoBook 650 G2 on the UltraSlim Docking Station(All hardware less than a week old).16GB RAMi7 6600Um.2 SSDTwo HP Z22n External Monitors Connected via Display Port.Windows 10 Enterprise.  Checked all connections and made sure they were tight.All drivers are up to date, bios is up to date.Windows Updates are controlled by System Center; manual check says I am up to date.I went through and turned off all power saving features, and went through every device in 'Device Manager' and unchecked 'alow computer to turn of this device'.Bios I turned off all 'sleep', 'deep sleep' and power save related options.Increased 'dedicated' RAM for intel 520 GPU to the max of 512GBI turned on logging in the HP Display Assistant 'Diagnostic' app; so far nothing to report.No errors in event viewer. There does not apear to be any one thing that trigers the display to blank out.Time does not seem to be a factor, can occur once ever minute or I could go an hour berfore it happens.I do not receive a 'no input' message and the power LED stays lit.It does not appear to be any single monitor, they both will show black screen, one at a time; I dont think I have seen both at the same time.This occurs if I am using the two displays and laptop lid closed, or expanding the desktop across all 3 screens. Aditionally if I am viewing a dark menu or even the defualt windows 10 wallpaper; Randomn single pixels switch to white very quickly( On the External Monitors).  This is easie... Read more

More replies
Answer Match 52.92%

Hi folks, long time no see!

I'm looking to supplement my existing setup with an additional monitor - however, I'm not sure if what I want to do is possible. Hopefully someone can steer me in the right direction. My setup is as follows:

HP Pavilion dm3 netbook
- VGA Out, HDMI Out

LG Flatron W2053TX
- VGA In, DVI In

I currently have the Flatron hooked up via VGA at a lovely 1600x900 (16:9) running as my main desktop, with the laptop displaying a 1366x768 (16:9) extended desktop. I want to be able to close my netbook and use two external monitors instead.

Now, that second monitor will be a Dell LCD with VGA In only. Question #1: If I buy an HDMI-to-DVI cable (or converter + normal cable), will I be able to simultaneously use both the Dell LCD and the LG Flatron as my displays?

Before you tell me this won't work, let me propose an alternative:

I recently ordered this port replicator from HP. It features VGA Out, and will receive video (along with oodles of other signals) from my netbook via USB. Question #2: If the HDMI + VGA solution above won't work, will I be able to simultaneously use both VGA Outs (the netbook's + the port replicator's) to achieve the same desired result?

Thanks in advance!

Cheers,

Walker
Windows Outreach Team

A:Can my netbook support 2 external displays?

Walker I don't think what you want to do is possible. I do know that the HD 3200 does support up to 2 displays, but in your case one of them will be the laptop's own display with only one of either VGA or HDMI as an external. It only has 2 RAMDAC's on it and will have the same limitations as a desktop card (not counting the HD 5xxx series that support Eyefinity) in that you can only run 2 displays at a time. Guess that answers question $1.

For question #2 I don't see why it wouldn't work, as it is essentially an external video card with its own drivers and software.

2 more replies
Answer Match 52.92%

I connected 2 Dell displays to my Surface book. Looks like the displays are recogniced but still no image on the displays. How can I fix this?

More replies
Answer Match 52.92%

Hello everyone,
I have a Vostro 5470. Actually, I connect an external display in HDMI port.
Can I connect another external display in my laptop USB3.0 port using Dell Adapter - USB 3.0 to HDMI/VGA/Ethernet/USB 2.0? 
My laptop has support? That is for work, I really not need high resolution.
Any comments are appreciated!Kind regards,

A:Two external displays in Vostro 5470

Hi MATHEUS SERPA,
What is the current OS installed on the system?
I have checked and could not find a Dell Adapter compatible with your specific system model. However, these two are known to work with other Vostro models and it might or might not work on your machine. You probably need to try it out and let us know - http://dell.to/1Y9DDqo
Or if you are looking only to duplicate the display, you could get a HDMI splitter - usually priced under $10.
Also, write me a private conversation with the service tag and your contact details(Name and Email) for case records.
Let us know if you have any other queries.

1 more replies
Answer Match 52.92%

Hello all,

What I am exactly trying to do is this: for an outdoor football tournament, I am trying to connect 3 external displays to my laptop (2 VGA monitors and 1 HDTV with HDMI). Since I cannot see my laptop screen in the sun, I am using one VGA monitor as the primary display (since it's brighter). Then, I am extending my desktop to the other VGA monitor and the HDTV.

The one VGA monitor (4:3 ratio) will be my primary display with the control screen for the scoreboard.
The 2nd VGA monitor (4:3 ratio) will be an extended desktop for me to show the play clock.
The HDTV with HDMI connection (16:9 ratio) will be an extended desktop and have the actual scoreboard on it.

I am using a HP G60 laptop (2009 I think) with 1 VGA out and 1 HDMI out. Below are my specifications. I don't have very much money to use for this, so cheap/free alternatives would be best. Thanks for the help in advance!
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 2975 Mb
Graphics Card: VNC Mirror Driver, 3 Mb (Mobile Intel(R) 4 Series Express Chipset Family)
Motherboard: Wistron, 3612
 

A:3 External Displays, 1 Primary, 2 Extended

The laptop isn't likely able to drive 3 screens, not too mention only having two outputs. Your only alternative would likely be an external video card. I've not used any, so I can't make any recommendations.
 

3 more replies
Answer Match 52.5%

Hello Team,
I've got the MS Surface Book as well as the docking station. I want to connect two external displays via HDMI (only possibility) to the Book and would like to use all three of the displays simultaneously with Win10 Pro. One of the displays I already connected with the Mini Display Port to HDMI connector.
Is it at all possible to connect the 2nd HDMI display, and if so how may I do it, what do I need?
Thank you very much for your help.
Sincerely yours
Daniel

More replies
Answer Match 52.5%

I just hooked up my X1 carbon to my TWO lenovo ThinkVision displays. I previously had a T420 and used VGI and DP for these two monitors and had them on the highest resolution and the text was SO much smaller than what it is now. All my windows are HUGE now, I have all the resolutions maxed out in the Intel HD Graphics Control panel on my new X1. My 420 had NVIDIA on it that powered all 3 displays. (laptop display and the 2 externals.) Why can't I get it to look like my other machine did? Monitors:L2251pL224pwd

A:X1 Carbon External Displays on DP and HDMI resolut...

Update...Intel control panel is saying my max screen resolutions for my external monitors is only 1680x1050 i know I was running these 1920x1080 on my old machine!   

1 more replies
Answer Match 52.5%

Hello,
I have a Precision M6700 (GQ12BW1) which is connected to Dell E-Port Plus Advanced Port Replicator. I have connected two external displays to it (Dell U2412Mb) via display port cable and laptop screen is also active.
Problem is that one of my displays flickers when I put something on fullscreen on it (e.g excel, picture etc). Not always but frequently enought to disturb.
I have updated BIOS and graphics driver to latest that dell support page offers. Also changed DP cables.
What else can I do to resolve this issue?

More replies
Answer Match 52.5%

Hey Guys, We're having problems with external displays on the ZBook Thunderbolt3 docking stations.   More often than not, when we connect the ZBook Studio G3s(Usually powered off) to the ZBook Dock w/Thunderbolt 3 ... and  press the power button on the dock... my notebook boots up with maybe one display detected correctly at the right resolution, and the other display either not detected at all, or detected as only capable of 640x480. I've tried the following: -Docking while computer is already on/logged in. (Usually much worse results.)-Using different models of monitors. (ZR2440w, E240k, E241, Z24n)-Disabling 'auto-port select' modes on displays.-Updaing drivers to latest for video, computer, dock, etc. This 'hassle' results in about a 15-20 minute dance of docking/redocking, unplugging monitors, rebooting, pulling power cords every morning trying to get both of my displays to work. Sometimes I can get them to work but then I can't get my USB keyboard to work. (Joy.) Any advise or solution for resolving these issues would be greatly appreciated.    

A:External Displays not being recognized properly on Z Book Do...

Looks like there is a new bios (1.08A1) and Intel Video driver (20.19.15.4444 A9) since I last checked... will try this and report back I guess.

2 more replies
Answer Match 52.5%

 Hello, I have an X1 Yoga OLED (20FQ) connected on OneLink+ and after 10 days of normal use I lost connection to both DP displays. I was running a 3 display configuation with two 1920x1080 on DP and 2560x1440 on BuiltIn Display. I have done all the updates, and I still don't get anything. The only thing I am not sure I have updated properly is the firmware of onelink+. I downloaded the firmware from here https://support.lenovo.com/cy/en/documents/acc100252 and when I execute it doesn't do much. I tried on cmd as an administrator, still nothing. Do I need some .net libraries or something?  HDMI (from Laptop ) to DVI works.MiniDP (from Laptop) to HDMI from there HDMI to DVI works. DP (Onelink+) does not workVGA (Onelink+) does not work Any help would be appreciated. Thanks,csco

More replies
Answer Match 52.5%

I have a laptop that appears to boot up as evidenced by lights, fans, etc, but no longer displays anything - even if I navigate into the BIOS. I expected that if the display panel or inverter had failed, it might still be capable of displaying on an external monitor but conducting a toggle with the Function Key and F5 key fails to display anything on the external monitor.

Does all this point to a new motherboard or have I forgotten something? TIA for your comments.
 

A:Laptop Displays No Video on LCD or External Monitor

sounds like the video chip has gone=m/board

may be more economical to go to a new laptop
 

1 more replies
Answer Match 52.5%

I have a ThinkPad P40 Yoga and I would like to use two external displays, as high a resolution as I can. This device has an Intel HD Graphics 520 and NVIDIA Quadro M500M on board. I also have ThinkPad USB 3.0 Pro Dock (connected via USB3.0 port).  I'd like any recommendations you guys have for what model external monitors will work with my device with the high resolution possible.  I'm feeling a bit burnt because I thought I could use a 4K monitor...and I can use only 1. And if I hook up the 4k I can't use another external monitor. :-/ So I'm looking for alternatives with greater than 1920x1080 resolutions if possible.  Thanks in advance for any advice!K

More replies
Answer Match 52.5%

Hi Guys One of our important clients has asked us me to quote for a HP laptop that supports the internal AND 2 x 2xternal screens simultaneously as they have a finance package they want to use that needs three screens. I've looked at the newer Spectre range which have 3 x Type-C ports which would indicate that two of these could be used for screen but I can't find any info to confirm whether 2 external screens will work at the same time along with the internal Any recommendations greatly appreciated 

More replies
Answer Match 51.66%

I have an EliteBook 8470P with the AMD Radeon 7570M display adapter.  I am looking to use to external displays as well as the laptop display.  Can I use both the VGA and Display port outputs to accomplish this without purchasing a docking station?  And are there any settings that I need to change to do this?

A:Configuring Multiple External Displays EliteBook 8470P

Hi JD325, Welcome to the HP forum! Thank you for your query, I will try my best to assist  you. I understand you would like to use external displays with your computer. Here is a document on HP Notebook PCs - Guide to Using 2011 and 2012 Business Notebooks with External Displays. I am also including HP Notebook PCs - Connecting to a Monitor, Projector or TV in Windows Vista, for your information.Please let me know if you would like further assistance.

9 more replies
Answer Match 51.66%

Has anyone seen this? I've had it happen to several T420s models. While connected to a docking station with the lid closed, the external monitors will just display flashing colors really quickly like in Kanye West's "All of The Lights" music video. Once the display is done, the laptop shuts off. When I first experienced it, it was on my personal laptop. I switched shells and popped my hdd into another one. It ended up happening again sometime down the line. It then happened to my boss' as well. Most recently I've had a colleague report the same issue. Does anyone have an idea as to what could be the issue?

A:T420s: External Monitor displays flashing Multiple...

I have the same problem too. I am not using any docking station. It occurs very rarely and I notice it happening when I connect to an external monitor or when in video calls. Happens both in Windows and Ubuntu. I tried switching to a different T420s laptop and I see the same behavior there too (but not as frequently as the other one). M_Wilson's description of the issue is spot on. The screen flickers colorfully for about 15-20 seconds and then the laptop shuts off completely. I also noticed sometimes that the laptop gets hot under the part where the display card is present (near the fan outlet vent on the left side). The laptop fan is running at full speed at that time.

4 more replies
Answer Match 51.66%

I just recently installed windows 10 on a T530 and I'm having an extremely bothersome issue. All the external monitors hooked up to the dock are disconnecting and then within 1-2s they all reconnect. After they reconnect I get a notification tray popup saying "gpu ready to save power". This can happen back to back or it might not happen for 5mins but it continues to happen.  These are things I've checked so far:There are no warnings or errors in the event viewer to traceI've done an extended test with lenovo's bootable diagnositics ISO and all tested passedSwapped chassis' (Put HDD in identicle T530 laptop)Swapped docksReplaced DVI cables to monitorsSystem Update doesn't show any updates for video drivers.Currently installed graphics drivers are:Nvidia - 10.18.13.5445 (11/5/2015)Intel - 10.18.10.4276 (8/7/2015)All Windows Updates have been appliedPower Options are set to never go to sleep and to never turn of the monitors.Set Nvidia power settings per this posthttp://nvidia.custhelp.com/app/answers/detail/a_id/3130/~/setting-power-management-mode-from-adaptiv... 

A:T530 2392 External Monitors (displays) disconnect ...

I also have this issue and it has been driving me nuts! I can't figure it out either.

9 more replies
Answer Match 51.66%

Does anyone know if the Latitude E7240 can support two external displays without a dock? Can you have one plugged in to the mini displayport and one in to HDMI and output just to these displays?
Or is it limited to just the laptop display and one single external display?
Thanks!

A:Latitude E7240 - Dual External Displays Without Dock?

Hi ag-asanchez,
The Latitude E7240 uses an Intel HD Graphics 4400 GPU and so can support up to 3 independent displays, not on dock. In order to use both the onboard screen and 2 external displays both the HDMI and MiniDisplayPort will need to be connected to external displays.
With the Intel Driver, 9.18.10.3204, installed and two external displays connected, the following option should enable 3 independent displays.
 
(from the notification panel)
 
Intel HD Control Panel >> Output to >> Extended DT (options here for clone or extended)
 
Intel HD 4400 Graphics Driver
http://www.dell.com/support/drivers/us/en/19/driverdetails?driverid=183CP
 
Please see the following Intel guides for more information regarding a multiple display set up for the 4400 GPU.
 
Intel HD Graphics 4400 - Configuration 3-Displays FAQ
http://www.intel.com/support/graphics/sb/CS-033714.htm
 
Thanks,

4 more replies
Answer Match 51.66%

When I plug in the USB cord for my external harddrive, I am prompted that the drivers have been installed, the device manager shows the drive in my list, but no new drive shows up in My Computer. Ideas????
 

A:External Hardrive displays in device manager but not in My Computer

13 more replies
Answer Match 51.24%

I have a ZBook Studio G3 connected to two external 1920x1200 displays Z24i through the Thunderbolt Docking Station via DisplayPort. Text in applications in the external monitors looks blurry, even though I have the setting to no scaling in Windows 10 for the two external monitors (100% scaling).  Interestingly enough, the text of the window that shows up when I right click on the desktop looks fine. The NVIDIA control panel seems to be using the right resolution, native. I have used HP Support Assistance to make sure that all drivers are up to date. I am at a loss. I have tried with an external UHD display and it works well, but not with the 1920x1200 display. Anybody has had this problem before? I have searched the forums but w/o luck. 

More replies
Answer Match 51.24%

I have connected my Thinkpad T430 with switchable graphics (Intel HD4000 and Nvidia NVS 5400M) to a Thinkpad Docking Station 4338 20V with a 90w adapter. I have an external monitor (Acer G235H) attached via DVI to the dock. I can only get the laptop to display on the external monitor when I set it to "Discrete" in BIOS, and when it does display on the monitor the screen is full of horizontal flickering green lines (think the opening of the Matrix). The monitor and cabale work fine when attached to other devices. The monitor and Nvidia card are both set to a 60 Hz refresh rate. I have installed the latest drivers for the Nvidia card, and I have all the latest updates for BIOS, Power Manager, and Power Manager driver installed according to the Lenovo Update and Drivers utility. I unchecked the "Decrease video color quality" option in the Power Manager's advanced settings as outlined in the following post:https://forums.lenovo.com/t5/ThinkPad-X-Series-Tablet-and/External-display-shaking-flickering-when-o... Has anyone else come across this issue and know of any other steps I could take? Thanks! 

More replies
Answer Match 50.82%

Hello,
I'm using a Latitude E7440 with a Dock and two monitors connected to it. (Both with DVI)
Sporadically (often already shortly after starting the laptop) one or both of the monitors are going black for about 5 and come back after.
I already tried several things to fix the issue but haven't been able to find a solution yet.

What I've tried so far:

Update to latest BIOS
Use different display driver
Used a different dock
Mainboard replacement
Installed latest MST HUB FIrmware
Disabled Display Port in the monitor settings
At this point I don't know what else to do to fix this issue and I'd really appreciate any help from others.

More replies
Answer Match 46.62%

hello,  I am trying to use my earphones as an external mic on my z70-80 which is equied with a single dual audio/mic jack.The earphones work well but the mic is not detected by the system.Is there any piece of software/driver to install in order for the external mic to work properly? thanks for your help

A:Lenovo z70-80 using external mic

Check your Smart Audio settings. Which mic to use/enable is handle there from what I have seen. I haven't used  an external myself.



T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Windows 7 Home Prem - 64bit w/8GBZ70-80 I7 - 5500U 16GB GB - 1TB HD Window 8.1 64bit FHD 17.3 inch Display, Nvidia G840 w/2GB memory

1 more replies
Answer Match 45.78%

I had the google redirector malware recently. I successfully removed it but now when I use any of the search engines in IE7, the results are displayed okay. When I click on any of the results to go to the web page, page cannot be displayed comes up. If I hit refresh, the page comes up.
If I were to add the web address it finds each site first time.
I am using Vista.
I have tried upgrading to IE8, but this didn't help.
I have tried changing the check for newer versions of web pages to be always, but this hasn't helped.
Has anyone any ideas?
Thanks in advance.

More replies
Answer Match 45.78%

Hello, I've been thinking lately of purchasing a new 144hz monitor for my Y50 4k, so I was wondering if other Y50 users have done this and if it was succesful ?Because I'm worried about the 48hz lock on the Y50, plus how do I know if the hdmi port on my laptop supports HDMI 2.0 (I need the the 2.0 so I can get at least 120hz out of the external monitor).

More replies