Tech Problem Aggregator

HP Envy dv7 - No Audio When Connected to TV by HDMI Cable; W...

Q: HP Envy dv7 - No Audio When Connected to TV by HDMI Cable; W...

I know this is one that has been floating around the forums for a while but I have not been able to find anything that works in my situation. When I connect my laptop to my TV (Panasonic Viera Plasma) via an HDMI cable, I can get the video to show on the TV fine but there is no audio on the TV; it comes out of the laptop. I have tried everything I can think of including deleting the drivers then reinstalling them, updating them, rolling them back, etc., etc., etc. Here are the specs on my laptop:HP ENVY dv7 Notebook PCWindows 8.1 64-bit, 8GB RAMIntel(R) Core(TM) i5-3230M CPU @ 2.60GHzIntel(R) HD Graphics 4000Intel(R) Display Audio (with Beats Audio)IDT High Definition Audio CODEC Also, here is a snapshot of the Playback Devices: As you can see, I have nothing which says "HDMI". I have gotten quite frustrated with not being able to get this to work. I would appreciate any help I can get. Thank you. Alex...

A: HP Envy dv7 - No Audio When Connected to TV by HDMI Cable; W...

Can someone please help...?

9 more replies
Answer Match 82.74%

Basic Specs

Brand New Toshiba Satellite C855
Win 8 64-bit
6 GB RAM

Display Adapter: Intel(R) HD Graphics (2000)
Driver: Intel 9.17.10.3040

Playback Devices
Show Disabled Devices - checked
Show Disconnected Devices - checked

High Def Audio Device displays as not plugged in


Cable is plugged inCable has been tested on backup laptopCable connected to HDTVVideo is fineNo Audio



I have spent hours installing and uninstalling drivers from the Toshiba and Intel sites. Tech support said to return it but I have just spent 2 days installing software. I never took a break to watch Netflix. Any suggestions will be greatly appreciated!

A:Audio Over HDMI Cable Not Working - HDMI Cable Not Plugged

The video is apparently not detecting the HDMI cable. Assuming you have a good HDMI cable it suggests a hardware problem in the new PC.

25 more replies
Answer Match 76.44%

Hello quick question so i'm clear and to see what you would suggest.

I have a new upgrade LG 55 inch 4k TV connected to my PC via HDMI to GTX970 I've read this TV supports audio also via the same HDMI cable plugged in to my video card. I'm a huge gamer.

Right now I have a X-Fi Xtreme Gamer sound card connected to a 4.1 Logitech setup w/sub. I've been using this for years and it works great for surround sound when available and EAX is always a plus SO whats my benefit to 86 the 4.1 and just go HDMI?

In that case I lose the 4 speaker setup correct and just use audio from the TV?? I can't see the advantage for this unless i'm missing something big. I don't use SPDIF output or the Dolby digital or DTS encoder from the card I assume all that you need a receiver.

Can I use HDMI output for audio and STILL use my 4.1 speakers? I don't want to invest in a receiver or anything like that at this point. What would you do if you were me? i'm at work now but I read if I go into the sound properties/playback devices I can choose HDMI output? I'm curious to see how that works.

thx!

A:HDMI cable for audio or keep my 4.1 w/soundcard? need help w/HDMI

Windows only allows one default audio playback device. e.g. HDMI or Speakers (your sound card). HDMI audio is generated on a sound chip in the Video card. You don't have all the options you do with a Sound card.

9 more replies
Answer Match 76.44%

Hello, I just bought an HDMI cable to connect from my HP Pavilion x360 onto my TV. Unfortunately, I only get video on my TV but no audio. The audio only comes from my Pavilion x360. I am aware of right clicking the volume icon and clicking on "playback devices" to set defult the HDMI cable or TV. Unfortunaly, this is not visible even after enabling the disconnected and disabled devices. Please, anyone help so I can get the audio on my TV as well? I've let a screenshot. As a reminder, my HDMI is connected on both sides, and I have both disconnected and disabled devices visible. Thank you!

More replies
Answer Match 76.44%

Hi.  Last week and prior mths HDMI connection worked, TV had sound.  This weekend, 8-20-16, TV sound went away but still had video.  Looked at forums, utube and did the control panel sound device manager.  the Digital Display Audio-AMD High Definition Audio Device; not plugged in is grayed out.  clicked on it to no avail.  the set default is also grayed out so i cant even set a default.  PC speakers do work.  bought a new HDMI cable but no change.  all the drivers are up to date.  not really sure what happened.  worked for months and now no sound.  any idea????

More replies
Answer Match 75.6%

Hey guys, I'm actually new here, so I am not sure if this is in the right forum page, but I need help. I have had a problem with my HDTV and laptop for a few months and finally decided to start a thread for help. The problem is that the HDTV is blurry and fuzzy when connected to my laptop via HDMI. However, I realize this is an overscanning issue, because in the AMD Catalyst Control Center, whenever I set the scaling for overscanning to 0%, the fuzzy text and screen is fixed, but the edges around the screen like the taskbar are cutoff the edge of the screen. I do not think my TV has an option for "Just Scan", but maybe you guys can find something I can't. Here is the manual:

http://www.sansuiproducts.com/images.../SLED2280D.pdf

Also, I am running Windows 8.1 with an AMD Radeon HD 7520G graphics card.

Any help is appreciated, thanks.

A:Need help with my laptop connected to my HDTV (HDMI Cable)

Not sure I can help but I have the same thing. I have a cheap TV and I think it has more to do with that. I play videos is all and not an issue there, just desktop is expanded past screen.

My TV is only 720p.

I'd love to see if someone has a fix.

5 more replies
Answer Match 75.6%

I used to be able to connect my r11 to the TV and get sound.  For some reason, this has now stopped.  I have been through all the forums and tried various options to no avail. All help gratefully received.

More replies
Answer Match 75.6%

I recently found out that every time i plug in a HDMI or Auxiliary cable, my computer crash. I tried changing the cable to see if that was the problem and it wasn't. I just don't know where to look to start fixing the problem. I've considered that maybe the connector is faulty, but i'm looking for option before going to that.

I use HDMI to connect my TV for movies
I use the auxiliary Cable to connect a speaker.
on different occasion.

A:Computer crashes after HDMI/Aux cable is connected

Did you try shutting the computer down, plugging in the cable then starting back up? I've crashed a computer when plugging in a USB Thumb/Flash drive, turned out it was caused by static electricity that I'd built up walking across a carpeted room, now have anti-static touch pads on my desks to touch before anything else.

3 more replies
Answer Match 75.6%

Hi! I have this monitor http://www.newegg.com/Product/Product.aspx?Item=N82E16824014146

and this cable

http://www.newegg.com/Product/Product.aspx?Item=N82E16812226013

Connected to a normal TV and HDMI to DVI cable to my lcd monitor at the same time it gave me an option at startup to switch to my HDMI source, but when I did all I saw was black on the LCD screen.

I was able to go into Display settings and switch it to HDMI manually but when it swaps to my lcd monitor its nothing but black again!

Do HDMI to DVI cables work for PS3s? My lcd monitor does not have a HDMI plug in. Only VGA and DVI

I'm hoping theres a trick to get this working or at the very least an adapter that wouldn't degrade the quality as much.
 

A:Playstation 3 and HDMI to DVI Cable connected to LCD Monitor

oh nvm my monitor dosent support high def outputs =\
 

2 more replies
Answer Match 75.6%

Hey guys. I have connected my PC to my HDTV (Sansui), and I cannot find an option in the TV for 1:1 Pixel Mapping. I need this because my TV is overscanning my laptops display and the taskbar and other images are cut off the screen. It is also quite blurry. I have the TV's manual here:

http://www.sansuiproducts.com/images/manuals/SLED2280D.pdf

I could not find an option in the manual, but maybe you guys could.

Many thanks.
 

A:Need help with my laptop connected to my HDTV (HDMI Cable)

6 more replies
Answer Match 75.6%

As the title says, I've tried connecting my TV to my computer with an HDMI cable, and the video part works, but no sound plays. When I checked the list of playback devices, the TV appeared (as shown below), but it apparently cannot play sound.

I don't think I know anything beyond what I've posted, but if anyone could help me out with this, I would appreciate it.

Also, as a side note - I am completely unable to interact with any of these objects - I cannot set something as a default device; there is no response when I do it, and disabling the audio device only works until current sources of sound (like videos) are restarted.

A:LG TV not playing sound when connected via HDMI cable

If you highlight the LG TV you should​ be able to set it as default. If not, it sounds lik a permission issue (like non-admin account).

2 more replies
Answer Match 74.76%

I just installed a gigabyte hd4350 in my hp a1520n desktop bc it has an hdmi output. picture looks good, sound works, however when the hdmi cable is connected to the my samsung lcd tv, i get no sound through my computer speakers even when im not using the tv as a monitor or when the tv is turned off. i get sound through the tv though. when i unplug the hdmi cable from the tv, i get sound on the computer.

is there a fix for this? i have onboard sound enabled in the bios.

i have windows xp 32bit. in the sound and audio device properties, under the audio tab, default device, i see both realtek hd audio output and ati hd audio rear ouput when the hdmi cable is connected. when its not connected, just realtek hd audio is available.

i know i cannot have sound coming through the tv and computer speakers at the same time. is it possible for the sound to be switched back to the computer speakers when the tv is off WITHOUT having to unplug the hdmi cable that goes to the tv?
 

A:no sound through computer speakers when hdmi cable connected to tv

Weeell. Have you even tried setting the "Default audio playback device" (or whatever, in control panel->sounds->defaults tab to Realtek HD audio when the cable is plugged?
 

3 more replies
Answer Match 74.76%

I have an Acer Aspire laptop running Windows 7 Home Premium x64.

I regularly connect it to my TV monitor via HDMI cable and fall asleep watching movies (played on VLC or Windows Media Player).

I set the computer to go to sleep after 1 hour.

Multimedia Settings are set to "Allow computer to sleep" under "When Sharing Media" in the Power Management section.

Screensaver is disabled.

I have overrided my audio driver, since powercfg command suggested it may be a conflict.

If I am playing a movie without the HDMI cable plugged in, the computer goes into sleep mode right on schedule. It is only when I have the HDMI cable plugged into my TV monitor, that it refuses to enter sleep mode.

What could be causing this problem? Makes no sense to me.

A:Computer won't go into sleep mode when HDMI cable is connected.

anybody?

1 more replies
Answer Match 74.76%

Hi

I have connect my laptop using an HDMI cable to my TV. And from my tv I have connected my two HiFi speakers. When the TV is on an AV channel I have sound coming from the TV and HiFi speakers but when I switch it to the HDMI source channel, sound only comes from the TV and not HiFi speakers.

This is frustrating because I want to watch movies on my TV through my laptop and get the feel of some surround sound through the HiFi speakers but it is not working!!!!

Please Help!

Thanks

A:No sound to HiFi speakers when HDMI Cable Connected

The problem is not your PC but your TV and how it handles HDMI audio. There is nothing we can do for this, it is strictly an issue with your TV and how it routes audio internally (or to external devices).

2 more replies
Answer Match 74.76%

Issue:

Windows 10 plays Mp3 Files just fine. Connect an HDMI cable to the video output port, and then windows 10 suddenly wont play those files. An error message pops us inside windows media player and Grove that this file type is not supported. Also no sound is played through the HDMI Cable to my TV, and no sound is played when i click the volume bar on the bottom right side.

More detail:

I work for an integration company. We just installed a couple of conference rooms for a company in which we have an HDMI cable running from the table through the floor in the walls and to the TV. From there it breaks out into the Amplifier and plays audio in the room. Normally i bring my Mac book pro for testing but i purchased this Windows 10 computer as a test device. I did not have a second laptop with me to test this out.

However, With the computer and the HDMI cable i am getting video to the TV. When i enter my TV menu and arrow around the menu option my sound works on the built in speakers in the room. So i can confirm that the cabling is all correct. This is the identical setup that we always use. I have also plugged my Iphone into the cabling behind the TV and played music which worked perfectly fine.

The computer, as i mentioned, would play MP3 files perfectly fine, untill i plugged in the HDMI cable. Infact i can be playing and MP3 file and then plug in the hdmi cable and suddenly the computer stops playing the MP3 file and gives me the error that windows c... Read more

A:Windows 10 wont play MP3 if there is an HDMI cable connected

Hi, welcome to tenforums. There are other threads on this forum with similar symptoms. Just search 'hdmi'

This may point you in the right direction:
Solved No audio after upgrade from 8.1 to 10 using HDMI cable - Windows 10 Forums

Please have a look at the others if that doesn't help and post back if not resolved. Good luck!

2 more replies
Answer Match 74.76%

I have a notebook..
Model : TOSHIBA Satellite L-510

and a TV
Model : SHARP LC32A37M (http://vlv.am/wp-content/uploads/pro...9192168124.jpg)

I have a HDMI cable and connected them both.. There are PICTURES.. but no sounds..

Please help.. Maybe if you think I need to install something additional please give me the sites.. Thanks...

My mom has been trying to fix this since last week..

A:Notebook connected to TV with HDMI cable doesn't work. Help pls!!~?

Have you checked the default audio device settings in your sound control panel?

3 more replies
Answer Match 74.76%

I have an HP Pavilion dv7-6050ea, and I've connected it to my Samsung UE32D6100 HD TV. Unfortunately, the colour looks awful, and I've tried my best to adjust it. I have tried playing with th settings of the TV, but I can't get it to where display well. I tried using the 'calibrate color' option in the display settings of Windows settings, and I found a configuration that works, though it's not perfect. The problem is, every time the screen saver comes on, the settings revert to default.

Any ideas?

A:[SOLVED] Dodgy colour when connected to TV via HDMI cable

whats the resolution of the laptop ?

16 more replies
Answer Match 73.92%

Tv: Panasonic Viera E6 PC: Asus K55VM with Win8
Basically the tv cuts the corners. Can anyone help me?
Screenshot by Lightshot
Can anyone help me?
Thanks in advance

A:Tv connected by hdmi cable to pc doesnt display the entire screen

Hi and Welcome to TSF!

Is Windows set to the correct resolution?

Are your video drivers up-to-date?

2 more replies
Answer Match 73.92%

Hello,

My laptop's screen goes black when I connect it to the TV via a HDMI cable, however this is completely new as it used to work fine. I can still watch things on my TV but I have to look at the TV screen where text comes up quite small and it makes it hard to do stuff, so I was wondering if anyone would know why my laptop's decided to start doing this, and how I can get it back to both screens working at once? The volume and everything else works ok, it's just a bit annoying is all!

I have Windows Vista Home Edition, not sure of the details, but I got it just when Vista first came out.

Thanks!

A:Help needed: Laptop screen goes black when HDMI cable is connected

do you have your drivers set to "clone mode" in your CP? (the bit where you set up multiple displays

4 more replies
Answer Match 73.92%

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3764 Mb
Graphics Card: Intel(R) HD Graphics, 1754 Mb
Hard Drives: C: Total - 463838 MB, Free - 265342 MB;
Motherboard: Gateway , ID59C , V1.05 , LXWLJ02009023BBCC42200
Antivirus: Bell Aliant Security Services Anti-Virus, Updated and Enabled

Okay, so over the holidays I received a brand new Hisense television and I was watching movies and tv shows on my laptop on the big screen through an HDMI cable for a few weeks. Before that I was doing the same thing with the big screen in our living room for months. I got up one day and wanted to plug it in but I kept getting a message saying no signal. I had had it plugged in the night before and it worked just fine. Yes, I checked to make sure it was on the right setting, HDMI 1. I also tried plugging it in the other HDMI slots on the tv and it didn't work in those either. It is doing the same thing to our tv in the living room and it just doesn't make any sense. The only thing I can think of is that my computer has some kind of driver that just needs to be updated or something but I have no idea which one. HELP PLEASE!
 

A:No signal message when laptop is connected to Hisense TV through HDMI cable!

7 more replies
Answer Match 73.92%

Hi, i've got another PC connected to my ENVY 27 ALL-IN-ONE PC, and when the computer was on windows 8 the audio when plug a pc or whatever on the HDMI IN worked fine, but yesterday I upgrade both of my computer to windows 10, and the audio when switching to the HDMI IN won't work anymore! HELP!

A:HDMI IN audio won't work on HP ENVY 27 ALL-IN-ONE

I have the same problem with my HP all in one computer, I havent found any fixes yet. I use th HDMI input for my verizon FTOS TV.   I have rolled back my Windows 10 upgrade to my previous OS amd it works fine. I am gonna wait and see if there is a fix found before I upgrage again to windows 10.  If no fix is found....    goodbye windows 10!

7 more replies
Answer Match 73.08%

Hi,

Whenever I connect my laptop to the TV via hdmi cable my desktop icons are moved and auto aligned in vertical columns down the left hand side of the page (my desktop). I have to drag them back to where I want each time. It's a fairly minor nuisance, but is there any way to avoid this, I've searched but can't find a definitive answer.

(I've tried, right clicking and unchecking 'align icons to grid' but that doesn't make any difference, it still always happens)

Thanks

A:Desktop Icons Auto Align Left When Hdmi Cable Connected

Originally Posted by ouroboros72


Hi,

Whenever I connect my laptop to the TV via hdmi cable my desktop icons are moved and auto aligned in vertical columns down the left hand side of the page (my desktop). I have to drag them back to where I want each time. It's a fairly minor nuisance, but is there any way to avoid this, I've searched but can't find a definitive answer.

(I've tried, right clicking and unchecking 'align icons to grid' but that doesn't make any difference, it still always happens)

Thanks



I believe this is an issue with the change in resolution that is likely occurring when you connect the HDMI cable. If you can set the HDMI output to the same as the screen, then the icons should stay where you left them.
I had the same issue with icon location changes when another user signed into the PC and then signed in. My icons rearranged. After a lot of trial and error I found that if I set the resolution, scaling, etc. options in both profiles to the default values, the issue vanished. I don't think Windows 10 knows how to deal with resolution changes and desktop icon locations very well, although I vaguely recall experiencing this issue with prior Windows versions. I could not remember how I solved it then, but the resolution/scaling/etc. work around is acceptable.

0 more replies
Answer Match 73.08%

I have 2 identical fairly new HP 360s, both running W10 64-bit. Both send video correctly to the TV over HDMI connection. Neither sends the audio, instead sending it to the laptop's internal speakers. This is an HP issue, as the HDMI cable is fine and works with all other devices. The cable and TV work properly with my Mac and Toshiba laptop and with my HP Pavilion desktop unit. Please advise as to the correct fix for this tiresome proble. Thanks,Steve Conelley

A:Envy x360 audio not passed to TV over HDMI

Hi there @Conehead1952,  Welcome to the HP Support Community where you can ask questions, find solutions and get help from others in the community! I read your post on the HP Support Forums and wanted to reach out to you. I understand that you are having an issue with the sound while trying to use the HDMI capability from your HP ENVY x360 Notebook PC.  Did you receive any error messages?Did you see if the HDMI was listed in the Digital Output Device? Here is a document for you called Troubleshooting HDMI Display and Sound Issues. It has three different sections that you can use for troubleshooting: Using correct HDMI cable for your HDMI deviceSetting HDMI sound outputTroubleshooting specific HDMI issuesCould you please run the Hardware and Devices  troubleshooter? The troubleshooter will help find and fixHDMIissues. Type troubleshooting in the search bar.Select Troubleshooting.Select View all on the top left corner.Click on Hardware and Devices.Follow the on-screen instructions to run the troubleshooter.Check if the issue persists.You could try to:Press (Windows key + X)Click on Device Manager.Expand Sound, video, and game controllersRight click on the sound driverSelect Uninstall.Once this is done, restart the Notebook twice and check if the issue persists.Did this reply r... Read more

3 more replies
Answer Match 72.66%

I have a HP Pavilion dv4-1435dx laptop. TV is Dynex LCD (one of those no name brand ones ) I checked the drivers on the laptop, they all seem to be up to date. However when I go to Control panel-Sound-Manage audio devices, there is no icon with an HDMI label to select for playback device. How do I add the driver for HDMI (to select)?

I have scanned (and tried) numerous suggestions on this type of a problem on different sites on the web (including this one, under a different thread)

Any suggestions, other than try a new cable?
Thank you in advance.

A:No audio When PC connected to TV by HDMI

Welcome to SevenForums.

In Sounds / Playback make sure it is not disabled and hidden.
Rt click on the Sounds / Playback window to make sure "Show Disabled Devices" is checked.

If it is not there open Device Manager to see if is listed and there are no errors.
You can open Device Manger from Start/Search

3 more replies
Answer Match 72.24%

I have the HDMI input on this computer and when I plug in an external source (PS4) it will display the video fine but absolutely NO AUDIO. I've done extensive searches online and can't find a single work around for this issue. HDMI video/audio is a basic function of these ports so it should work as advertised. Can anyone shed any light on how to get the audio to come through the HDMI input? Thx

A:HDMI Input **No Audio** (HP ENVY Recline 27-k150xt)

@glazzjoe?, welcome to the forum. This sounds to me like it may be in the settings of the PS4.  Have you checked to assure that the settings are correct?  I blieve I have seen a similar problem where the sound settings in the PS4 weren't set properly. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

2 more replies
Answer Match 71.82%

Hi team - I've had this new 550-114a tower for a week. It's connected with an HDMI lead, and for the life of me I can't get any audio. I'm a techno numpty - but have followed what I can find online. But the HDMI output is showing greyed out (not connected), so I can't set it as a default. Any ideas thatmight help? Thx

More replies
Answer Match 71.82%

hi,
i have my pc connected to a LG flatron 22" tv by hdmi cable the picture is fine but the audio does not play through the tv, a jack cable from the pc to the tv does not work either, if i use the jack plug into separate speakers it will play the audio through the speakers. i have checked in play back devices that the tv is default device, checked audio and graphics card drivers they are all up to date.

pc specs are:
cpu: amd phenom ii x4 BE 3.4ghz
mobo: asus m4n75td
graphics card: 2 x nvidia gefore 8800 gs in sli

stuck on what to try next any help would be appreciated
cheers

A:hdmi cable to LG tv no audio

billyc, welcome to the Seven Forums.

You can't get audio over HDMI from the Nvidia 8xxx/9xxx series of cards without doing the following,

Guide: 8800GT/9800GT/9800GTX Sound over HDMI (Now including Creative cards)

3 more replies
Answer Match 71.82%

Hello, i have win 7. My hdmi cable is connected from my pc to my tv. I have picture however no audio. I have already made sure the audio driver is updated in device manager. I have also set hdmi as my default device in playback. Hdmi cable is good because i get the audio when i connect my lap top. I have troubleshooted as much as i could without any recourse. Please help, thank you
 

A:no audio from pc to tv via hdmi cable

10 more replies
Answer Match 71.82%

Hi folks, so I got a new pc and connected it to my LG 42LV550T using a DVI to HDMI and 3.5mm from line out (and tried headphone socket) to the 3.5mm audio in (RGB/DVI) socket on the TV but I don't get any sound on the TV.
I connected the PC to my stereo using the line out and headphones socket with 3.5mm to stereo/phono plugs and I get sound, but I would like the sound through the TV and then the TV connected to my stereo for better sound all round.

I know DVI doesn't carry sound.

I had a chat on LG support with no help

Any ideas ?

PC specs.
OS Version: Microsoft Windows 8, 64 bit
Processor: Intel(R) Core(TM) i5-3330 CPU @ 3.00GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 8082 Mb
Graphics Card: Intel(R) HD Graphics, -1984 Mb
Hard Drives: C: Total - 953516 MB, Free - 897064 MB;
Motherboard: Gigabyte Technology Co., Ltd., H61MA-D3V
Antivirus: Windows Defender, Disabled

Thanks TechnicalH1
 

A:DVI to HDMI and 3.5mm audio connected but no sound

16 more replies
Answer Match 71.82%

I wish to connect the HDMI to a video projector and the audio port to a sound mixing desk. Either audio or video works fine alone but when both cables connected am getting high-pitched feedback into the sound system. I have tried disabling HDMI as an audio device but it makes no difference. Have tried more than one HDMI and audio cable - same result.  

More replies
Answer Match 71.4%

Morning guys and girls!

------ On Cables:

I've been looking for a cable that takes DVI from a graphics card, as well as 3.5mm (or RCA, as I have an adapter) from the sound card, and converts it into a single HDMI plug for my TV.

I've been able to find cables for audio alone, or cables for DVI alone, but seeing as I want to both watch and hear my movies at the same time, they are useless, lol.

I thought the best way to find something that would do the job and do it properly (I've had experiences with low quality cables before) was to come and ask you Oh and I live in the UK, so I'd need something on sale here.

------ On Video Ghosting:

I'm currently using 10m VGA and RCA cables for my TV (the machine's quite far away, and can't be moved closer). The audio has only minor interference that isn't noticeable when I'm actually using it, but the video image has some pretty annoying ghosting.

I'm led to believe that the quality of the cable has plenty to do with this, though of course proximity to electronic equipment could be causing the whole thing. The nearby electronic equipment can not be moved, though.

So besides freeing up my RCA cable for other uses and providing a better resolution image, I want to replace the current setup with a HDMI cable to remove this ghosting.

Now here's where I get slightly confused! HDMI transfers digital video data not analog, thus the picture should remain perfect even with the amount... Read more

A:Solved: Looking for a DVI & AUDIO to HDMI cable?

6 more replies
Answer Match 71.4%

Hi, I recently purchased a HP Stream 11 R00 laptop with Windows 10. When I hook up my HDMI cable to our tv, there is visual only, no audio. When I do to devices, I am not able to locate or add my tv and I have tried installing Intel Graphics Driver from this site, but get error message as follows : " This computer does not meet the minimum requirements for installing this software". Any suggestions please? Thanks in advance,Ruthie

More replies
Answer Match 71.4%

Hello all,I am trying to get audio to my TV from my laptop.I hook up my laptop to my TV with a hdmi cable,and only get a picture,no sound.I would like to listen to music I have on my laptop thru my TV,and be able to watch dvds without having to listen to the quiet-crappy speakers on my laptop.Do I need a different cable?Do I need to re-configuire?

I live in extremely remote Alaska,so a new cable is at least 10-14 days away.

I am using windows media player.Windows 7.

Thanks in advance Rob

A:[SOLVED] Audio to TV thru hdmi cable

Hi, welcome to TSF

have you set your sound to the hdmi as default? can do that threw control panel sound default playback device.

3 more replies
Answer Match 70.98%

My headphone jack is busted, so I bought an HDMI to 3.5mm adapter so I could use my headphones that way. However, I can't get the laptop to send audio over HDMI because it doesn't think there's any device to receive that audio. How can I get Windows to route audio that way anyway? Everything I find is the opposite problem, where someone has a device plugged in and recognized but can't send audio to it.
OS: Windows 7
Model: Dell Inspiron 15r Special Edition
Processor: Intel Core i7-3612QM CPU @ 2.10GHz 2.10GHz
Graphics card: AMD Radeon HD 7730M
Adapter: click here

More replies
Answer Match 70.98%

Been trying to figure out a problem with HDMI audio out and "not plugged in error"

HW is a motherboard with HD3200 and ALC889A HD with latest drivers.

Using a HDMI cable i get HDMI audio out, but if i switch inputs on the receiver then back HDMI audio is "not plugged in".

changing resolution brings it back as default device.

Tested a backed up vista image with ati 9.04 and realtek hdmi 2.23 drivers and it worked fine changing inputs on the receiver.

The same drivers in win7 did not resolve the issue, so im guessing theres something in win 7 that causes this

A:win7 bug with HDMI audio connected to receiver

if you have an HDMI capable receiver I am going to assume you have at least a 5.1 setup correct? And I am also going to assume that "HW is a motherboard with HD3200" means onbaord HD3200?

If yes then I would suggest using either the coaxial output or optical S/PDIF output to the receiver as you are not reciveing 8 channel LPCM through HDMI.

As to your actual problem I am setup same as you, however I am not having that problem... is video still able to pass through to your TV even in the audio not plugged in state?

7 more replies
Answer Match 70.98%

I've had my laptop for a while, and I've used my TV Screen as a secondary monitor a lot. A while ago my computer updated to windows 8.1 when I fell asleep on it and accidentally hit the update button when it came up (oops), making me have to use windows 8.1 now. Now I haven't had many problems with it, it works fine and dandy, but I do have a major problem when I try to use my second monitor. When I run a game or movie on it, the audio comes out from the laptop speakers, not the TV speakers. Previously, using windows 8, it would let me use both.

I know that if you go into the control panel and the sound systems that it should show two speakers, but for me it isn't. I've tried lots of different things and browsed the web for an answer, but I can't find anything.
Screenshot of my playback devices window:

If anyone knows how to get this to work, it'd be a big help!

A:HDMI connected second momitor not playing audio

According to your screen shot, you only have the PC audio (RealTek) and no HDMI audio. Reinstall the drivers for your video and see if that restores the HDMI audio.

No PC info posted, please fill in the "My System Specs". Helps us to try and help you.

I have both HDMI and PC audio on my Win 8.1 machines so it should work for you, if the PC is fully compatible.

1 more replies
Answer Match 70.56%

Hey guys,
first time poster here.
I have a palit 9600gso smart 1gb ddr2 card. i recently bought a viewsonic vx-2253mh LED monitor. now i've hooked up my gfx card with my monitor using a hdmi cable but i don't get any sound. i also have a GB GA G41-M-Combo mobo. i was wondering if anyone could help me with this problem..... thx in advance...

A:HDMI Audio issues with cable and gfx card...

Did you install the drivers for your gfx card? The HDMI audio drivers will be in the driver package!

http://www.nvidia.com/object/win7-wi...ql-driver.html

2 more replies
Answer Match 70.56%

I am trying to connect my Lenovo laptop to my television with an HDMI cable so I can watch a movie on my TV. I am able to send the video from laptop to my television, but I have been unable to have my television produce any audio. The only audio is from my laptop.

What do I need to do to have the TV play the audio (as well as the video)?

More replies
Answer Match 70.56%

I see on the forum that this has been a problem for a long time but I don't see where anyone has figured it out yet. If I missed something please enlighten me.

I built up a computer to use with my HDTV. A Gigabyte GA-E350N-USB3 MB loaded with W7x64. Audio and sound worked fine when it was being set up with a RGB cable and an audio lead from the green sound jack. When it was taken to the HDTV and connected with an HDMI cable there was no longer any audio at the HDTV...video was 'killer' but sound was dead as a doornail. Have spent hours fooling with it and hoping someone might have a solution while I rest my tired brain tonight!

It lists two audio drivers. 1) ATI High def audio and 2) Realtek High def audio. (Don't have any idea why it had two audio drivers-?) Both are operating properly. I suspected that maybe by having two audio drivers maybe there was a conflict so the Realtek was disabled as it showed no HDMI setting. The ATI is active and HDMI is selected presently, and no audio at the HDTV. The sound bar indicators in the computer ATI display indicates there is an audio signal there but the HDTV is not receiving it..
Any Ideas? Thanks in advance

A:HDMI Cable/Good video/No audio

First, you don't have to disable the RealTek. The ATI High Def is the correct audio for HDMI. In most cases when you connect the HDMI cable to the video card, Windows will automatically change the "default audio playback device" to HDMI (from "Speakers"). In a few cases that doesn't happen automatically and in those cases you must manually change the default playback device to the HDMI.

Connect the HDMI cable then check the default audio playback device in the Control Panel/Hardware and Sound and finally the Sound panel. If the HDMI is not set as the default device, make it the default device and then see if you have audio (this all assumes the TV's HDMI input is working correctly and the HDMI cable is good).

6 more replies
Answer Match 70.14%

Laptop audio works until I plug in HDMI cable to external monitor.  Looking for guidance on resolution.  Thanks,

More replies
Answer Match 70.14%

Problem started a little over a month ago on my HP laptop running Windows 7 64bit.

When I connect the laptop to my either of my TVs through an hdmi cord everything works fine. Videos run smoothly and the audio is in sync as if there's no problem.

If I try to watch a video on just the laptop though the problems start. If I try to play anything (songs/videos) in Windows Media Player then it says "Windows media player encountered a problem while playing this file".

When I play a video on YouTube the video runs smoothly but there isn't any audio to go with it.

If I go to control panel - sound - speakers and headphone properties and try to play a test sound it says 'failed to play test tone'

Attempted to update the IDT High Definition Audio CODEC driver but windows said it was up to date. Same thing with the Intel(R) Display Audio driver.

Thanks for any help

A:hp laptop audio and video problems (unless connected through hdmi)

Are you leaving the HDMI cable connected to the PC when you try to us the PC's sound (IDT)? Generally, when an HDMI cable is plugged in and detected the sound automatically switches from the "Speakers" (the IDT) to HDMI as the default audio playback device and thus no regular PC sound.

6 more replies
Answer Match 69.72%

So yeah, I use a HDMI - HDMI cable to my laptop whenever I want to watch DVDs on it.
It used to be that the audio would work, but now that does not seem to be the case.

I've tried rolling back to previous versions but to no avail.

And yes, i've lurked through all the previous threads but to no avail.
The default audio device has been set to the TV's, the HDMI audio has been enabled and i've tried everything. Nothing

Please Windows 7 forum guys, you guys are my only hope!

Here are the specs

Acer ASPIRE 4741G
Intel Core 5-460M processor 2.53 GHZ
4 gig ram
Windows 7 64bit Home premium
NVIDIA GT 420M

A:Need Help : Audio won't work when I attach my HDMI cable to my laptop

found this info for you,give it a go and let us know how it went
- Click on the "Start" button
- Click on "Control Panel"
- With the Control Panel in "Control Panel Home" view please click on "Hardware and Sound"
- Where it says "Sound" in green letters there are three options below that are in blue click on "Manage Audio Devices"
- This will bring up a window labeled "Sound"
- On the "Playback" tab there is listed the sound options available to you. One should read "Digital Output Device (HDMI)" Click on that.
- There should now be a check mark on that option.
- The Sound should then play through your HDMI hookups to the TV.

9 more replies
Answer Match 69.3%

I usually connect my laptop to my tv to watch video files in VLC. Recently, I have been noticing when I connect my laptop to my TV and play these video files, the audio skips so much that the video is unwatchable. This happens with every video I try to open (mostly MKV and AVI files). However, when I play these video files without the computer connected to the TV, they work fine. Could the problem be my TV or my HDMI cable?

A:Playing video files causes audio to skip when connected to TV via HDMI

In VLC, set a delay between audio or video, or for the mkv's you can demux and adjust them. First, I would update your drivers, is this a laptop or desktop?

3 more replies
Answer Match 69.3%

Hi,I would to know how connect audio  from my ENVY Phoenix 860-100nl to an old Logitech X-540 5.1 System.I have three jack input in X-540 but only one jack output in HP desktop... Must I split sound from anhother source? (HDMI?)See the image Thanks in advancce to all.Cheers 

More replies
Answer Match 68.88%

Hello,
My lapotop is HP Pavilion 9750 running Windows 7 Enterprise (with the latest updates). When I'm inserting the HDMI cable to view my screen on the TV it automatically shows the video, but I have to manually change the default playback from "Speakers" (Realtek High Definition Audio) to "Realtek Digital Output" (Realtek High Definition Audio) so I could hear the audio from my TV and not from the computer.

Is there a way to make that switch automatically when I connect/disconnect the HDMI cable?

Thanks!

A:How to automatically change audio device when inserting HDMI cable?

Apparently the video card you have does not have on-board audio (chip) and must get the audio for HDMI from the S/PDIF (Digital) connection on the motherboard. This type of operation, in cases I've dealt with, will not autiomatically switch the audio playback device.

On newer video cards with the HDMI audio built on the video card, this type in most cases will automatically switch the audio playback.

3 more replies
Answer Match 68.46%

Sounds simple enough... but can't seem to resolve this one. I have a new Dell XPS 630i. I successfully installed Windows 7 Ultimate x64, updated all drivers, installed 6GB of RAM and everything is working well. However, on boot up, I receive an error message "Audio Cable Not Connected". I have been inside the case a couple of times and checked every connector possible, including the 4pin connector from the Sound Blaster card to the mother board, and checked for any loose wires, (back of disc drives/video card etc.) but no luck. This boot up error msg started right after windows went out and updated all the drivers, and the error was not there before that. My default audio device is the Sound Blaster card and the other audio devices are disabled. I have visited the BIOS setup and the default audio is set to the Sound Blaster card too. The audio out works perfectly. Thanks in advance - hope this isn't too easy, or I'll look pretty dumb!!

A:Boot Error: Audio Cable Not Connected

Run the Windows 7 Upgrade Advisor --> http://www.microsoft.com/downloads/d...1-2497c146af15

jcgriff2

.

5 more replies
Answer Match 66.36%

I am fairly new with W7 so please excuse my inexperience with this.

I have headphones connected to front headphone jack (Dell Inspiron 560 W7 Home 64). I want to have cable connected to rear jack (for speakers in other room). I can't get audio from the rear if anything is connected to the front jack. I do get about one second with the rear pink jack and the yellow jack - but not the green jack - but after one second it stops.

The sound card is RealTek High Definition Audio, driver from 10/09 Vers 6.0.1.5963.

Note that when making a similar connection to my XP machine the RealTek card/jacks do play in both front and rear at the same time.

I have attached screenshots of the Control Panel ->RealTek image (annotated with mouseover text) and the Volume->Properties image.

A:Can't get Rear Audio jacks to work While cable connected to front jack

I do a lot of support on the Dell users forum. Dell uses a custom implementation of the RealTek audio, only the Dell RealTek audio drivers will work or work properly. Some models of the RealTek audio chip have the capability to do what you want and some do not, on others it's up to the PC/Motherboard vendor whether to implement certain functions or not. It may be possible but I don't recall seeing any posts on the Dell forum about this particular item.

Usually, the default setup is to mute the rear connected speakers when a headphone (or whatever) is plugged into the front headphone jack.

Here is the Dell on-line manuals for the 560/570 models
http://support.dell.com/support/edoc...t/en/index.htm

3 more replies
Answer Match 63.42%

So basicly I was trying to hook it up to TV then I wouldn't budge so I pulled harder then the cord separated leaving HDMI tip stuck hanging out of the port I need to remove this quickly please let me know what to do I tried tweezers

A:my hdmi cable broke and now the hdmi tip is stuck in my hdmi...

I meant to say HDMI tip is stuck in my laptops HDMI port I'm only 13 and I don't know how to take apart and I'm looking for non repair answers 

3 more replies
Answer Match 59.64%

I have a video card with both a DVI and an HDMI output and a monitor with only an HDMI input. Should I connect my monitor to my PC with an HDMI cable or with a DVI - HDMI cable?

A:Should I use an HDMI or HDMI-DVI cable to connect to my monitor?

Hdmi

4 more replies
Answer Match 58.8%

Hi there

Brilliant little device for passing HDMI (less HDCP !!) plus RCA L, R Audio and 5.1 Optical Audio (SPDIF). Switchable audio pass thru,, 2Ch, 5.1 ch.
(Max HDMI input is 1080p so won't work for your 4K huge TV's though) - still an excellent little device for those who want to record from HDMI video.

(IMO the cheap ones are better than the expensive boxes as the expensive boxes don't strip HDCP from the HDMI output making some content not re-cordable with video capture devices or even software such as Audials).

AGPTEK HDMI converter. 21 EUR

AGPtek 1080P HDMI to HDMI Converter - Newegg.com

Audio quality more than good enough for games, movies etc. A really discerning audiophile might not be 100% satisfied - but it's not intended for Studio quality !!! More than good enough for me and I'm quite fussy.

Cheers
jimbo.

More replies
Answer Match 58.8%

Hey everyone,

I recently upgraded to Windows 7 (Build 7100) from Vista (32 bit) and am having trouble getting audio from my HDMI out port.

I am using the Mobile Intel 965 Express Chipset and have upgraded to the latest available driver but still no luck.

I have attached a screen shot of my device manager and my sound devices with the HDMI plugged in - there is no option to select the HDMI as an audio device.

Any ideas?

Appreciate any help!

[IMG]file:///C:/Users/Peter/AppData/Local/Temp/moz-screenshot.png[/IMG][IMG]file:///C:/Users/Peter/AppData/Local/Temp/moz-screenshot-1.png[/IMG]

A:Windows 7 - HDMI out no audio - Intel HDMI audio

Try to set the SPDIF as the default audio device. That might work.

If it doesn't, try updating audio driver.

At last, as you said, your GPU driver is the last one, still, the problem might be right there. Usually, when the device manager shows the HDMI audio as functional and it still doesn't work, it's probably a GPU driver issue.

Try switching your GPU driver to older but stable versions.

On my case, nVidia drivers area always a pain in the *ss, so, when I successfully find a good and stable driver I stick with it for a long long time.

3 more replies
Answer Match 58.38%

If I tape together tightly HDMI and USB cables for a 15 foot run, will they cause any interference?
I know they are digital signals so I think should not. But doing this does cause a herring bone interference with analog vga cable.

A:bundling HDMI cable together with USB 2.0 cable will be interferences?

It depends on the quality of the cables insulation and shielding.
The only way I know how to find out for sure is try it.

1 more replies
Answer Match 56.7%

I'm trying to hook up my TV with my computer, and for the most part it's working. The video goes through and I get how to control it and everything. The only thing not working is the sound.

I'm using an HDMI to HDMI cable, and like I said the video is fine. Also, when the cable is plugged into my boyfriend's laptop, the sound comes out of the TV.

So this must mean the problem is with my computer specifically. Although, this computer is only a month old, so I wouldn't think anything is out of date.

I have no idea what's relevant, so I don't know what to post screenshots of, but I've read tons of other threads with the same issues but none of their solutions seem to work for me.

A:Realtek HDMI Output ATI HDMI Audio -Not Plugged In-

Info on your computer would help. We can only talk in generalites or suggestions without it. In most cases, if you have a full HDMI port with both audio and video, when you plug in an HDMI cable Windows changes the default audio playback device from the "Speakers" (your PC sound card) to "HDMI".

In your case the ATI (now called AMD) should be the device that is feeding the video and audio.

As your PC is only 1 month old, the PC vendor's tech support should be the ones to call since you haven't been able to find a solution to date.

2 more replies
Answer Match 55.86%

hi all,

I have my media center PC connected to a Sansung LCD TV through an HDMI cable.
Everything works fine; the PC detects TV and both audio and video travel through the HDMI cable from PC to TV

The problem happens when I turn the TV OFF and ON. In this case, the video is back but not the audio. This can be seen in the "playback audio devices" in "control panel", the icon that represennts the sansung speakers via HDMI dissapears.
Any idea of what to do? I got the latest video driver, which also deals with HDMI audio but no luck at all...

thanks

A:HDMI audio problem when connecting LCD TV to PC via HDMI

This is more of a HDMI handshaking issue than a Windows or driver issue, and a very common occurrence. Sadly if you do a Google search using "hdmi handshake no audio" for the search terms, you'll get lots of results but very little in the way of how to solve. About the best solution I came across is this one,

*Official* Asus Xonar HDAV1.3 thread - Page 271 - AVS Forum

A lot of that thread deals with the Asus Xonar sound cards, but there is also quite a bit about the no audio in general.

9 more replies
Answer Match 55.44%

The HDMI in bus dont work under windows 10, it worked under windows 8.Is any update near.

More replies
Answer Match 54.6%

How do I use the HP Envy 34 All In One HDMI Input? I am not able to view my PlayStation 3 via the HDMI Input because I do not know where to switch to the HDMI Input. Please help! Thank you, ricoventures

A:HP Envy 34 All In One HDMI Input

Hello @ricoventures, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are having an issue with the display, and wanted to assist you! Have you tried using the settings buttons on the bottom right of the screen?  Please post back with the results. Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great day!

1 more replies
Answer Match 54.6%

Hi I tried everything that I can find online to solve this problem but still doesnt work for me.i conncet HDMI with my laptop to tv, and there's no sound.  I already clicked the "show disabled devices" and "disconnceted devices" but there's no option of HDMI sound.  this is so frustrated.  Please help me out if you know

More replies
Answer Match 54.18%

The HP Envy Desktop - 750-114 has 2 HDMI Ports and both are output to set up 2 monitors.  Is there a way to scange the settings on either one of these HDMI ports into an input port so I can attach a HD camers?

More replies
Answer Match 54.18%

Hi All: recently bought HP Envy 750-197c with dual HDMI, along with LG LED Monitor 24m47. For the life of me, I cannot get the computer to dispaly when connected via HDMI. I've tried different HDMI cords, connected other peripherals via HDMI to the monitor without any issues, and even tried connecting the computer to 2 different TVs via HDMI but nothing. Does anyone have any idea why I cannot get my computer to dispaly via HDMI on my monitor? Any help at this point would be great. Running Windows 10. 

A:Envy 750-197c won't connect via HDMI

Hi there @johnjpas34,Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that you are having an issue with getting a display connected with HDMI to come up. I am happy to help with this. First, check out this: HP Desktop PCs - Connecting Monitors and TVs to Your PC (Windows 10, 8). Then be sure you have the drivers for the display installed. If there are not drivers specific to Windows 10, then try installing the older drivers using compatibility mode in Windows 10/ Please let me know how that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

2 more replies
Answer Match 54.18%

I am having the same problem with the HDMI input on my HP Envy 23 k-009c touchsmart. I know I was using the HDMI prior to the Windows 10 update with my Shaw Direct HD box. The button under the left side was also working to switch between sources. I have tried different drivers by updating and then by going back to an earler version of the driver all without any luck. I was hoping as well not to have to go back to Windows 8 by re formatting and starting over. Hoping to hear about a possible solution to get the HDMI input working.  

More replies
Answer Match 54.18%

I recently bought an HP Envy m7, and I setup an external monitor. I recently had a BIOS update, which I think broke the HDMI port. I connected the port to a projecter, and it still does not get any input through the HDMI. I've tried multiple cables, and none of them work. My monitor I'm using is an LG IPS Flatron monitor. When I plug in the HDMI, it tells me it's not receiving anything to diplay. I've used Windows Key + P to switch it to extend mode, but it doesn't work.

More replies
Answer Match 54.18%

Hi there,Can someone help me?I've had my all-in-one for about two years and never tried to use the HDMI port. Only now that I bought an LG ultrawide monitor (to use as a second monitor) and it doesn't work. It doesn't even detect/recognize the monitor when I plug it in, but the monitor works fine with my laptop computer. What can I do?

More replies
Answer Match 54.18%

I connected my Surface Pro 3 with Windows 10 to HP Envy 34c Display using HDMI but audio no sound on it.I appreciate any help on it in order to leverage my HP Envy 34c Display with sound.. Thanks in advance

More replies
Answer Match 54.18%

Im trying to set up my xbox 360 with my desktop, my hdmi is connected and when i push the button the the bottom left corner, nothing happends. I have tried restoring even though it has never worked. My computer regonises the xbox in the device manager and all i can do with it is remove it.             PLEASE HELP AS SOON AS POSSIBLE -Huddy

A:HP envy recline 27 hdmi in not working!!!!

i have also tried different hdmi cables ect...

4 more replies
Answer Match 54.18%

I've had my HP Envy Recline 23-m230 since 2013, and fairly recently (August of 2015), I upgraded to Windows 10. A few days ago, I had tried to connect my Wii U to the computer. The computer does have an HDMI In port and also includes an HDMI In button. I connected them to each other, but when I had pressed the HDMI button, the screen had went black and said "Game Mode, No video signal". For the past few days, I've been trying to find a solution, but no luck. I've switched HDMI cables, uninstalled and updated HP MyDisplay several times, and updated my graphics drivers. I don't want to have to resort to reinstalling Windows or something drastic like that. Please help!

More replies
Answer Match 53.76%

I tried to connect my ps4 to the monitor but it did not work. The computer is fully updated and I made sure to plug in the device and turn it on before attempting to switch the display over. When I hit the button to change the display nothing happens, nor does the menu open up to allow me to switch. Please help

A:Cant get HDMI input to work on my Envy recline 23

I had to re download my hp display and it worked out

1 more replies
Answer Match 53.76%

I recently bought an HP ENVY 750se Desktop PC that has what I believe to be 2 HDMI in ports that do not seem to be working and are not displayed in the 'devices list' in Device Manager. There is also an HDMI out port that is working just fine. I was attempting to connect a DSLR camera to the through the HDMI in ports to capture live feeds. Also, I just checked the product details from the order and those HDMI in ports are not listed there. Yet, they're on the PC in an extension slot. Any help with this is appreciated. Thanks.

More replies
Answer Match 53.76%

There is no HDMI output on my ENVY 700-327c. How can i connect it to my Samsung HDMI monitor? I have tried a DVI-D (24+1) to HDMI cable without success. The monitor can be connected with RGA which does work but i prefer to have digital input rather than analog. Can anyone explain the failure of the cable and/or what other options i may have. Thanks. Pittmann 

A:no hdmi output on my ENVY 700-327c. how do i connect it to m...

Hello @Pittmann, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how you are looking to connect your desktop computer to a Samsung TV using an HDMI cable and adapter, and I would be happy to help you! You should be able to connect your computer to your TV using an DVI / HDMI adapter, as long as the adapter is labelled "Active" for both sound and video to be seen and heard. You will also need to ensure that the specific DVI connector fits the pin configuration of the adapter. I hope this helps! Best Regards

3 more replies
Answer Match 53.76%

Hi, I just got a new HP Envy x 360 in July 2016 and a new HP monitor 27es Display in mid-August.  It was connecting to the monitor by using HDMI fine till last week.  From a week ago (around Labor day), it stopped recognizing the monitor.I have an old HP laptop, and it is fine connecting to the the monitor by VGA.  So, it is not the monitor's issue.I remember I did the recommended HP update around the same time.  I am suspecting that update caused the issue with HDMI.  Can anyone help?  Thanks.   

More replies
Answer Match 52.92%

HDMI port seems to have stopped working. I usually connect to HP Pavilion 23xi screen but my HP Envy does not now detect it. Tried HP Envy on other screens and it does not detect them either. No idea why it stopped working. Not a computer buff so need simple solution ideally!

More replies
Answer Match 52.92%

Hi, I see from the rechnical specifications document that the HDMI version of the HP Envy 17-n107na laptop is 1.4.My question is that can I use this HDMI port to connect my laptop to a monitor with a resoultion of up to 2560x1440?Or the maximum resolution supported by this HDMI port is only 1080p? Thanks

A:Maximum resolution supported by HDMI output from HP Envy 17

Hi, No, from its   Maintenance and Service Guide  page #3:            HDMI version 1.4 supporting 1920 1200 @ 60 Hz Source:  http://support.hp.com/us-en/product/HP-ENVY-17-Notebook-PC-series/8499288/model/8903915/manuals Regards.

1 more replies
Answer Match 52.92%

New laptop only shows internal card drivers so no chance to switch sound to HDMI. Are there any W10 drivers available for the sound on the HDMI port - image is fine.  Needed for church projection system.

A:No sound to TV from HDMI port Envy Laptop 15-ae107na

@fundif? Try these 2 drivers. "Then reboot." http://ftp.hp.com/pub/softpaq/sp74501-75000/sp74569.exe http://ftp.hp.com/pub/softpaq/sp73001-73500/sp73302.exe REO

2 more replies
Answer Match 52.92%

I recently bought the HP Envy Pheonix 860-050na PC and have had issues with the HDMI ports. There appear to be three on the back, however only one works. I have been trying to set up multiple displays, however because of this issue it is not working. Below shows pictures of the ports. The two labeled HDMI ports are the ones that do not work, and the one on its own works without any issue at all. Any assistance with this would be appreciated.Thanks. 

More replies
Answer Match 52.92%

I've had the HP ENVY Beats 23-n012 for about 6months now and I'm very happy. Thank you for the wonderful computer! I have a question about the HDMI input. I've successfully hooked up the Wii U video game system to the HDMI in and can switch to that signal with success. My goal is to record the signal so I can capture my son's gameplay for him. Is this possible?   Thank you so much! Best Regards!

A:HDMI input question on HP ENVY Beats 23-n012

it would only be possible if you have bought a hdmi capture card or extension, either hooked up on one of the ends of hdmi cable, or as a unit connected directly connected to the Wii U

1 more replies
Answer Match 52.92%

Alright here's my situation:

I have a Core2Duo PC running Vista Home Premium 32 bit, hooked up to my TV using a HDMI cable. This has been working fine for 2 years now. Yesterday I decided to add some more RAM to this PC (4 GB instead of the standard 2 GB to be exact). I know 32 bit will only read 3 GB but I was thinking of upgrading to Windows 7 64 bit later.

Anyway I booted up the computer, worked fine of course, even watched a movie or two without problems. Then this morning I booted up the PC and I suddenly noticed the volume icon saying that there were no audio devices detected! I checked under Hardware and there are no audio devices whatsoever! So my HDMI cable is still giving me picture but no sound! Seeing as I'm using onboard audio I immediately booted into the BIOS and although I couldn't find a specific option that said onboard audio I did see something audio related being "HDA" (I assume HD audio) on automatic, the other option was ACRealtek97 or something. However it was enabled so no luck there.

Does anyone know how all of a sudden my HDMI cable isn't providing audio anymore? I even checked my Nvidia card which also stated that HDMI audio was enabled.

I hope anyone can help me, thanks in advance.

A:HDMI audio doesn't work, no audio devices detected.

hi and welcome to the forum's

Go to:

Control Panel > Sounds > Playback

Then click on HDMI sound and click on the Set Default button

1 more replies
Answer Match 52.92%

No sound.
Little speaker with the red 'x' appeared yesterday
I have gone through the whole update drivers circus to no avail, my laptop can't detect that it has speakers built in so it doesn't bother finding a driver for them.

This is where I am at:
- Intel Display Audio is the only driver installed for sound
- This means that sound works when the laptop is plugged into an HDMI
- When HDMI is not plugged in, the computer cannot find the built in speakers.
- I have Linux on this system and audio does not work there as well

I would call this a broken chipset, but the fact that the computer still processes audio with the HDMI cable attached is confusing me. Also, the 'audio board' for this laptop has 2 usb ports attached to it, and those both work fine.

Any help would be appreciated

A:No Audio Output Device is installed, HDMI Audio Out Works

Hi welcome to the forum

first thing i would check is the bios to make sure it is enabled.

9 more replies
Answer Match 52.92%

Hello, I have a hp envy dv6when i connect the battery chargersays connected without charge.ive carried to the technical service and they not found the failure.they check the drivers, the motherboard, the jack power.i checked the batery and the charger on another hp envy dv6 and worksalso ive done all procedures that i found on internet, but doesnt solve the problem.can be a bios problem ? or something like this?thanks hola tengo un hp envy dv6 que cuando lo cargo dice conectado y sin cargarse.lo lleve al servicio tecnico y  no pudieron encontrar la falla, ellos revisaron los drivers, la placa madre, el jack de poder.revise el cargador y la bateria en otro notebook hp envy dv6 y funcionan perfectamente.tambien he hecho todos los procedimentos que he visto en internet y no se soluciona el problemase podria solucionar con resetar la bios o algo asi?.gracias 

More replies
Answer Match 52.5%

HDMI cable allows only video transfer or audio and video?

A:HDMI cable

If your gfx card allows it the hdmi cable will carry the audio too. HDMI cables are design for both video and audio signals.

6 more replies
Answer Match 52.5%

I have an HDMI to RCA converter cable to put my computer on my TV screen. However, when I hook the cable up to my computer and my TV, my computer does not detect it. I have a Toshiba Satellite A505 computer and run Windows 7. Any suggestions? Thanks!
 

A:HDMI to RCA Cable

The cable will only work if the graphics card has TV out capability to output analog signals on the digital pins. I suspect the Satellite A505 does not have this capability .
 

2 more replies
Answer Match 52.5%

I have recently upgraded my laptop from windows 8 to windows 10. Upon doing so I have been unable to view anything from the laptop to the TV via a HDMI cable. What could be the matter.

More replies
Answer Match 52.5%

Because I am an ignoraums, I bought a HDMI to DVI cable for my new Digital TV to connect to my Dell pc.

I do not need a "to DVI" cable. I need a cable that will connect from the HDMI to my old fashioned big ole crt that has the pins and screws into the back of my cpu.

What do I need? JUst tell me what to shop for. exactly.
this is wat i bought http://www.eforcity.com/pothhdmid5m1.html

the connector for the tv is fine, the connector for the crt is not. I think I have a sixteen pin or a nineteen pin. I don't need any software do I? I have WMV and Quicktime and Realplayer. do any/all of them function with this kind of hookup?
 

A:HDMI cable

When you refer to the "Connector for the CRT" do you mean the connector that is on your old CRT monitor or are you referring to the video output connector on the computer?

If you are talking about the connector on the computer, its it trapezoid shaped with exactly three rows of round openings with exactly five openings (contacts) per row? If so, it is a typical VGA connector. The bad news is that VGA is analog video only and the HDMI connector on your TV only takes serial digital video. There is no simple and inexpensive way to convert from one to the other. If the TV does not have any kind of analog computer video input, you may need at least get a new video controller card that has an HDMI output for your computer.

EDIT: I just reread your post and am now not 100 clear now on what you want to do. Your old fashioned CRT monitor with VGA input will not work with the HDMI output of your computer. If your computer has a DVI output, exactly which of the connector configurations does it have as shown in the following link:

http://commons.wikimedia.org/wiki/File:DVI_Connector_Types.svg

Note: There are people selling fairly inexpensive cables on eBay and on-line stores that have a VGA plug on one end and an HDMI plug on the other. I have no idea what kind of hardware they were designed for but I am 99.999% sure it will not work for your computer's VGA output.
 

2 more replies
Answer Match 52.5%

I would like to watch movies through my Easynote TJ65 laptop on my HDTV via an HDMI cable. I get perfect picture but no audio, can you please tell me what settings I need to put on my laptop to get sound on my TV.
Thanks
MJK
 

A:using HDMI cable

9 more replies
Answer Match 52.5%

When I connect my Windows 7 computer to an LCD TV monitor, the resolution is set to 1920 x 1080, however I don't see the entire Desktop, rather it looks like it's been zoomed in. Any ideas?

A:HDMI-DVI Cable to LCD TV

Hello Slam,

You might double check to see if your DPI settings may be set to something other than the default 96 DPI.

Hope this helps,
Shawn

9 more replies
Answer Match 52.5%

I run a vga cable from my computer to my monitor. The cable needs to be about 20 feet. I tried a dvi cable but the longer dvi cables (more than 5 meters ) dont work. Can I use an HDMI cable and hook up 2 hdmi to dvi converters on each end to attach to my computer and computer monitor?
 

A:hdmi vs dvi cable need help

9 more replies
Answer Match 52.5%

I am looking for a cable that takes component, and stereo audio in on one side, and ends up as a single HDMI connector on the other side, so I can connect my PC to the TV's HDMI port.

At the moment, I use three seperate composite cables, move my PC speakers around as that's what the sound comes out of, and it's a whole lot of hassle and a whole big mess of cables that barely reach.

I've looked all over for a cable that does this, it sounds like something people need, and I can't understand why I can't find it. The closest I have found is this PS3 cable. However the connector on it is some special one for a PS3, not a HDMI one. Or else, it would be absolutely ideal:

I live in the UK, if anyone knows of somewhere that sells what I'm looking for, it would be much appreciated, thanks
 

A:HDMI Cable?

8 more replies
Answer Match 52.5%

I have absolutely no idea about it...can anyone please tell me what it is (in brief) and also will it improve my graphic visuals in my monitor??
 

A:What is an HDMI cable and do I need one?

HDMI stands for high definition media interface, basically it's a 2 in one cable that carries the display signal as well as a sound signal. If you use a HDMI cable to connect your laptop to your tv for example, you'll be able to use the TV as another monitor, and you'll also be able to play music through your tv speakers.
With computer monitors, unless they have built in speakers that you plan to use, there's no real advantage of using a HDMI cable to connect from your computer, a standard DVI or VGA connection is just as good (Though go with DVI (White) over VGA (Blue) if possible there)
 

15 more replies
Answer Match 52.5%

I currently have a HDMI to DVI cable connected. It was an inexpensive one and now I'm finding out it is probably the cause of grainy vision on my screen.

So, what would be my best cable to get to solve this problem?
I have looked at both Monster cable and Ultra but even w/ these, there are different levels.

Thanks, Tom
 

A:HDMI to DVI cable's

11 more replies
Answer Match 52.5%

I've just replaced the old VGA cable with an HDMI and the display is slightly smaller than before.

The system is a Dell Inspiron 580 with an ATI Radeon HD 5450 1Gb graphics card.
The monitor is a Dell ST 2310 (1920x1080).

I've tried updating the adapter driver but Windows reports that the best driver is already installed.

A:HDMI Cable

What do you mean by "smaller"? Is the text and icons look smaller now compared to before? If so, probably the monitor is running at it's native resolution compared to when you hook it up using VGA... If you can, provide a screenshot...

zzz2496

9 more replies
Answer Match 52.5%

Hello everyone!

First of all i would like to thank everyone for the answers and help you share and i am new to this forum. I tried to search before making this thread but i havent found any answer that could help me.

I just bought 2 LCD monitors ( Acer and Asus) they all work perfectly But i have a problem, a huge one. The Asus monitor refuses to work when the VGA (acer) is connected and vice versa.

The Asus is a 23" LCD monitor, its connected via HDMI.
The Acer is a 18,5" LCD monitor, its connected via VGA.
My laptop is an Acer 7736, 2,20 GHZ, 4 GB RAM, 1GB graphic card from ATI Radeon.
So i beg you please to help me, i have tried everything possible, been trying for the last 7 hours and i even downloaded Ultramon but it doenst work either.

I only want them to work in same time, what can i do?

Here is the link, i even tried updating the drivers on the graphic card but nothing works.
Thanks in advance!!!

A:HDMI trouble when VGA connected

A lot of laptops do not have the ability to go to more than two monitors (Edit: this is including laptop as monitor). You can probably have both work if you close your laptop lid, otherwise, only the laptop and VGA or laptop and HDMI will work. (Edit: if you close laptop lid, the two monitors VGA and HDMI will work but only with laptop monitor closed)

I think there is a piece of hardware you can purchase that can turn a USB port into and external display adapter, but I don't know if it was GFX card specific or if your card needs or supports a particular piece.

My laptop suffers from this as well. I tried it and confirmed it after seeing issue on this forum a few weeks ago.

9 more replies
Answer Match 52.5%

First of all sorry if it's not that Windows related!
So the problem is that my LCD TV has a scrambled picture when my computer is turned on and connected to the TV via HDMI. I got analog signal TV connection but the picture is fine while the PC is turned off. Yeah I know I should get digi TV but till then I would like to sort this out. The TV is a Samsung 40" LCD model LE40A336. It has 2 HDMI input ports. Tryed both with same results. BTW if I remember it right, I had the PC connected via VGA last weekend and didn't have this problem. I will double check it in the morning.
Maybe I'm using wrong setting with PC... wrong Hz or sth. Anyhow maybe someone has had similar problems and solved it.
PC:
GTX 470 DVI->HDMI
i5 2500K
Windows 7 x64
EDIT: The TV is the only monitor connected to the PC via HDMI. Sound is passing through the HDMI cable aswell.

A:TV scrambled while PC is connected via HDMI

  
Quote: Originally Posted by karelo


First of all sorry if it's not that Windows related!
So the problem is that my LCD TV has a scrambled picture when my computer is turned on and connected to the TV via HDMI. I got analog signal TV connection but the picture is fine while the PC is turned off. Yeah I know I should get digi TV but till then I would like to sort this out. The TV is a Samsung 40" LCD model LE40A336. It has 2 HDMI input ports. Tryed both with same results. BTW if I remember it right, I had the PC connected via VGA last weekend and didn't have this problem. I will double check it in the morning.
Maybe I'm using wrong setting with PC... wrong Hz or sth. Anyhow maybe someone has had similar problems and solved it.
PC:
GTX 470 DVI->HDMI
i5 2500K
Windows 7 x64
EDIT: The TV is the only monitor connected to the PC via HDMI. Sound is passing through the HDMI cable aswell.


the VGA doesn't transfer data signals through digital technology, it uses analog, that's why the picture appears correct on the VGA, the HDMi though uses a technology called HDCP handshaking, the PC needs to handshake the display for it to show the images being encrypted from the desktop, if that handshake doesn't take place then the image will appear scrambled.

you can read up about HDCP here High-bandwidth Digital Content Protection - Wikipedia, the free encyclopedia but your options are just to use the VGA cable, or if it is a software fault then ... Read more

6 more replies
Answer Match 52.5%

hello 
when i connect my TV ( samsung) with HDMI to my Sony vaio i can not play the audio on the TV( after i commute to AV- HDMI ) 
only after i reboot my laptop with the HDMI connected. 
after that i can play a movie with audio on TV. 

can u tell me why ? 
i run Win 8.1

thank you 
Alex 

More replies