Tech Problem Aggregator

When I switch ON my notebook I hear " chuck " or click soun...

Q: When I switch ON my notebook I hear " chuck " or click soun...

Me and my friend bought same notebook , but these days when I turn ON notebook I hear a small sound near power button , but my friend notebook works fine , what can I do??

More replies
Answer Match 52.92%

Notebook won't switch on. The power light is on but nothing happens

A:Notebook won't switch on

Hello, Thank you for posting in the HP Support forum. Welcome onboard! I am sorry for the issues you experience with your HP computer.  When you press the power-on button , does something happen ? Any lights emitting, any noise, anything ?  Please, review this HP official article about such an issue you experience now. Follow the appropriate steps that fit your case to attempt to fix the issue:>> http://support.hp.com/us-en/document/c03515402 If you did try everything but nothing helped, I am afraid you will need to bring your computer (or ship it) to service - HP Authorized service center. If the computer is still under warranty, you will need to notify HP support first. If you are not sure where such a center is located, please contact HP support for assistance in finding one. Here is more info: >> http://support.hp.com/us-en/document/c00372730>> http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

1 more replies
Answer Match 52.5%

my acer powered down by itself like the power had run out but it hadnt....so i had to force shutdown...since then it wont switch back on the connection light just flashes twice slowly instead of several times like normal and the screen remains black... i have tried all the remove battery and ac tricks and nothing is working ,,,,any ideas ?????????
 

A:My Acer notebook won't switch on

Have you wiped the RAM and the deep sleep settings by unplugging it from the AC adapter and also removing the battery, then waiting half an hour?
 

11 more replies
Answer Match 51.66%

During start up or sometimes use ,the lap top gets switched off due to rise in temperature. I use a cooling pad ,but still it gets switched off. After some time when we switch on,things are normal. But this can repeat. This causes concern and difficulties.I loaded Windows -10 operating system now. When I enter the stored password through key board,it says not orrect password.Repeated effots ,no use. Same status continues. I entered into the set up by pressing Esc button. How to come out of it now. I am not able to use the laptop.Kindly advise ,in the lay man's language. Ravindranathan.M

More replies
Answer Match 51.24%

I turned off my notebook using the mouse and the screen menu. The computer apparently closed down as it should, the screen went black, but the light on the power switch continues to glow. When I try to turn on the computer again, the power switch has become unresponsive. Now I can't turn my computer on. (I don't actually know whether the computer is turned on or off because the screen is black). The notebook has a fixed battery, so I can't do a hard reset by removing it. What should I do?

More replies
Answer Match 51.24%

I am unable to operate my rocker switch on my keyboard...it's not stuck and there is nothing showing negative in the device mgr...could this just be a driver situation and if so, any idea where to go to install the driver?
Thankd,
richncali
 

A:Acer Aspire notebook rocker switch

Where to find drivers Acer homepage after you have found you acer aspire model make sure you select your correct operating system it's at top of the tabs to get the right one scroll down to find your drivers
 

3 more replies
Answer Match 51.24%

My notebook which has 8gb ram is running well 1day before but now it is not switch on. When i switched on the device it is turn on for a seconds then it is auto shut off before a day it is turn off the display and turn on when i enter the enter button for 3 -5 times. What van i do

More replies
Answer Match 51.24%

I have the following notebook.

I recently upgraded to Windows 7 Proffesional x64.
I used the Asus CD to install all Asus stuff. Even the ones I don't need.

My notebook as two graphics cards. The default Intel Onboard card and the more powerful 1GB nVidia GeForce GT425M 1GB video card.
Before the upgrade (which was a clean install) when I played a game (left 4 dead2, call of duty: black ops) the notebook automatically switched from the Intel to the Nvidia graphics card. But it doesn't anymore.
I have read that my notebook used Nvidia Optimus technology to do this.
Although I can't seem to be able to solve the problem.

Here is my TSG SysInfo log:

Code:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5 CPU M 460 @ 2.53GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 6764 Mb
Graphics Card: Intel(R) HD Graphics, -937 Mb
Hard Drives: C: Total - 153499 MB, Free - 82492 MB; D: Total - 434874 MB, Free - 294610 MB;
Motherboard: ASUSTeK Computer Inc., N53Jf
Antivirus: Kaspersky Anti-Virus, Updated and Enabled

 

A:Notebook doesn't switch graphics modes.

7 more replies
Answer Match 51.24%

When switching on, the power button lights up and f12 (wifi light) lights up orange. The caps lock light flashes twice between pauses. The screen does not light up and the computer doesn't seem to respond to anything. I've tried a hard reset to try and fix it but it doesn't seem to have changed anything. It's just over a year old and is used mainly for the internet on trusted sites.

More replies
Answer Match 51.24%

Can anyone help?

For the past month or so every time I am in the middle of doing something - usually on the Internet - the cursor stops moving and nothing happens when I press the Winkey or CTRL+ALT+DELETE.

I've done several system scans but found nothing. The mouse is built in and not a USB mouse and I am using Vista Home Premium on a Del Inspiron 6400.

Any suggestions would be very welcome.

ocset

A:Mouse freezes - having to switch off notebook regularly

Welcome,

Can be memory or other causes. Fill out your system specs and I will try to help.

While you get the information that I need, you can download this. You may want to run it overnight, because it needs several runs to be accurate.
http://www.memtest86.com/

1 more replies
Answer Match 51.24%

Hi I recently purchased a Tiny universal adaptor after having left my H.P charger in a different location which meant I was going to be without it for a week or so.The Tiny charger did not pass on any power to the laptop.. I have since got back the H.P charger which came with the laptop, and tried powering it up. Still nothing.  My laptop is one of the B&O line with a non-removable battery. Do I need to claim on the warranty and replace or is there an easy fix? ThanksWill

More replies
Answer Match 50.82%

Hey I bought a satellite mini three weeks ago and up until today it worked sufficiently.. I had been charging it all day. And would occasionally switch it on to check the second battery was charging. Note unfortunately it won't switch on at all. Anybody else have this problem or know where I can send it to get it repaired?

A:Satellite Click Mini L9W-B won't switch on at all

I've found that sometimes you have to hold the power button for well over 5 seconds to power it on. I hold it down until you see the screen back light come on faintly. A quick press shows the charge status.

Mark

2 more replies
Answer Match 50.82%

Hello everyone,

It is my first post on that forum, so again - hello.

I do have some problems with my notebook - Acer TimelineX 5820TG with PQI S525 128GB SSD drive as a replacement for the oryginal drive.

After using it for three months, it started not to wake up from sleep, running extremly slow on startup, finally my graphics quality and performance in Starcraft II dramatically decreased to the point when even menu was "crippin".

I did reverted the system to the point after just drivers and Office 2010 were installed (+ skype + avira as well). Everything was running smooth for four days maybe. Again, SC2 got unplayable, and moreover, I have occasional BSODs (twice i think) during the GPU switching from ATI to Intel ( external to internal GPU).

Here is a dump listing:


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\Minidump\011711-31605-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c58000 PsLoadedModuleList = 0xfffff800`02e95e50
Debug session time: Mon Jan 17 21:46:31.156 2011 (GMT+1)
System ... Read more

A:Windows 7 64 BSOD on GPU IntelGMA/HD5650 switch - notebook

Hello there, well... i'm not on the BSOD squad but from what i see in the log, the cause of that particular BSOD is the Avira Antivirus and your Graphic Cards...

I also recommend to download the drivers from the manufacturer's website, in your case, go to:

Graphics Drivers & Software

And download the latest drivers for your notebook.

After that, uninstall your current ATI drivers, run Driver Sweeper to remove any leftover from the drivers, reboot and then install the new ones...

8 more replies
Answer Match 49.98%

I've just started using a microsoft usb notebook 3000 mouse on my dell inspiron 2650 running win xp - fully updated. I have no response when I right click with the mouse. I can still use the touchpad to right click (I have to!) but not the mouse. I've updated the synaptics software and the intellipoint software. I've tried disabling the touchpad completely, just disabling the buttons but still I cannot get any respose when I right click using the moue. The left click, single and double, all work fine but not the right. I'm out of ideas and would appreciate any suggestions.
 

More replies
Answer Match 49.56%

Hi,

just got win7 ultimate, i got it with an admin/admin account, created a new admin account, and then deleted the old one, also changed the computer name etc...

one weird thing happens im not sure if its related... When i lock the computer, or gets locked by scrsaver etc, when i try to logon it gives me incorrect password, i then click switch user and type my password and its ok..

happen to anyone??

A:On lock, password fails, must click switch user and ok

Please fill in your system specs so we know what we're dealing with...Help us help you

Is this a computer that was given to you??

9 more replies
Answer Match 49.14%

Hi,

I have the following big problem with my Satellite Click Mini L9W-B - this happened already two times.

I suspect that this may be connected to some Windows 8.1 setting. It also may be it is BIOS related.

PROBLEM: if I leave the laptop in a sleep mode (by just closing the lid), then If I do not use it for some time (>10 hours) then after that I could not switch the laptop on - it simply does not respond to any keys including the power on button. It does not matter whether I connect the power or disconnect it, I still can not power on the laptop, also it does not matter whether I try it with or without the keyboard attached. BUT: the battery on back on the screen is warm ,so obviously the laptop has not been switched off completely and something (i.e. windows sleep mode or bios or something else) is preventing me to power it on.

The solution I have so far is to leave the laptop for a very long time disconnected (to drain the battery completely - it will not be warm any more!) and then connect the power and then it will be able to switch on. Alternatively, opening the screen cover and manually disconnecting the battery and then connecting it again also work. After that the laptop can be switched on and works fine.

Obviously it is not very good because to wait very long (several days!) or to open the cover is not really a good option when you need the laptop!

Can you help?

May be it is something to do with some power-saving features of Windows?

Many thanks!

A:Satellite Click Mini L9W-B - could not switch it on until battery is fully drained

There is a quick workaround instead of waiting for the battery to drain...

Hold down power button for around 20-30 seconds. That should hardware turn off the power completely allowing you to turn it on again.

Update the bios to the latest version and apply all windows updates after that, that may solve the sleep bug issue

1 more replies
Answer Match 49.14%

Hello,

For about a month now, I have had this Widows 7 logon annoyance: Sometimes this annoying glitch occurs which won't allow me to login to my account even though I have entered the password correctly; I have to click the Switch User button and then the 'logged in' account. My laptop is set to stay on when I close the lid; I normally ctrl-alt-del and close the lid. A solution would be most appreciated.

A:Windows 7 logon annoyance requires me to click 'Switch User'

  
Quote: Originally Posted by kallist0


Hello,

For about a month now, I have had this Widows 7 logon annoyance: Sometimes this annoying glitch occurs which won't allow me to login to my account even though I have entered the password correctly; I have to click the Switch User button and then the 'logged in' account. My laptop is set to stay on when I close the lid; I normally ctrl-alt-del and close the lid. A solution would be most appreciated.


Why are you Ctrl+Alt+Del before you close the lid? Why not just shut the system down when you know you are not going to use it for a period of time?
Why not set it to go into hibernate at the lid closing? Which I never do, I'm a shut down type of person or just leave it running.
Is there only one user account on your notebook? And is it a Admin account or do you have 2 accounts, one Admin and the other a standard user?

4 more replies
Answer Match 49.14%

Hi guys,

Last 2 days i have been trying to this. Bought a new microphone thought the old one that i havent used for couple of years was broken. But my new one is not working either.
I can hear people but they cannot hear me, it is not mute either. But sound recorder not working either, can anyone help please? Many Thanks
 

A:Microphone is not working, not mute, can hear people but they cannot hear me any idea

Hello have you tried the microphone set up testhardwre
control panel sounds and audio voice ???
 

3 more replies
Answer Match 49.14%

Hi guys,

Last 2 days i have been trying to this. Bought a new microphone thought the old one that i havent used for couple of years was broken. But my new one is not working either.
I can hear people but they cannot hear me, it is not mute either. But sound recorder not working either, can anyone help please? Many Thanks
 

A:Microphone is not working, not mute, can hear people but they cannot hear me any idea

First of all, duplicate-posting is bad, don't do it

On to the problem - have you tried installing the latest drivers for your audio device? You may also want to check the default recording device in Sounds & Audio properties from the Control Panel.
 

1 more replies
Answer Match 49.14%

I have noticed something that has been happening since I bought it but I didn't realized the origin till now, whenever I work in either excel or word and I press the left button of the mouse or touch pad to, for example move something or highlight a text line, the CPU takes about 100 % of the memory and accordingly the processor fan makes a lot of noise to remove heat (that's consistent though).

Raj
 

A:Notebook heats up with left mouse click ??

8 more replies
Answer Match 49.14%

Hello. I'm working on a friend's notebook. It was brought to my attention because it was so slow they couldn't do anything with it. And it usually is THAT slow. Because there was no anti-virus program running, and because I couldn't seem to do anything with it, I re-installed the Windows 7 OS through the recovery program. It still is as slow as it was before.

Right now I have it working better only because I have disabled everything in the startup and only have microsoft services running (through msconfig).

Another problem is that it will no longer update windows. I had installed Panda Cloud Antivirus, thinking it would be best because my understanding is it is low on system resource usage. That won't run now either. I have uninstalled it, in case it's causing issues. The system has no antivirus right now.

I have tried so many things I wouldn't know where to begin to explain. The usual things are not helping. I am self taught and usually can sort things out enough to get things going again, but not with this one. There are thousands of error messages and what nots in the event log.
I'm really hoping you can help me sort this machine out. And I'm hoping to learn a little in the process. I wouldn't mind learning a ton more about fixing computers too. Is there a course/tutorial etc that you would recommend?

Computer Specs:

HP Compaq Mini CQ10-500

Intel Atom CPU
N455 @ 1.66GHz
1.67GHz
There are 2 of these ... Read more

A:Notebook freezes with one simple click all the time

Hello -First install an Antivirus program ASAP - Also make sure Windows Firewall is activated -It is really dangerous to go online without an antivirus. Without one, you are extremely likely to get infected. I can't tell you which one is the best because determining that is generally not feasible; however, I can give you my strong recommendations for programs that I have tested and that I trust. All of the following are excellent free (not free trials of) antiviruses. Be sure to only install one.Microsoft Security Essentials (what I currently use)Avira AntiViravast!AVGThis can be added to with Malwarebytes Anti-Malware Free and SuperantiSpyware Free or in paid/active versions -Be sure to UPDATE and Run Quick scans with Malwarebytes and SuperantiSpyware every few days, starting now -Others may have more advice for you soon, so please stay tuned - - -Thank You -

13 more replies
Answer Match 48.72%
Q: Chuck

Please help! I keep receiving an error message in Vista.. run legacy elevated cpl, and I cannot get any sound except cracking speakers. How do I resolve this nightmare?
 

A:Chuck

The title "Chuck" (my name) is the reason I looked at your message. But the title says nothing about your problem.
 

2 more replies
Answer Match 48.72%

Hello All... I seriously can't get any sound out of Vista when I dump in video from my camera! Called Samsung they say it's a Vista problem. So I come to you for help. Pretty please. Can anything be done so I can finally hear video through the Windows Media Player?
 

A:Should I Just Chuck It??

8 more replies
Answer Match 48.72%

Hello,
 
Windows 7 64 bit professional
Lenovo ThinkPad T530
Kaspersky 3.0 Pure
Windows Defender
Use Firefox/Chrome
 
In the past 2 weeks my laptop has suddenly become very frustrating to use.   It is usable for a seemingly random amount of time, and then invariably some combination of the following will happen:
 
Cannot switch to or launch new apps from the start menu and taskbar (mouse just won't click)
Cannot alt/tab to switch to a new app
Mouse cursor moves but cannot click anything in current app (or)
Cannot move mouse cursor but click seems to register (this one happened while I was typing this forum post)
Scrolling does not work
Cannot right click
Mouse moves but moves very slowly and movement is very delayed
 
Closing the laptop and waiting for it to go to sleep mode and then opening it back up seems to magically fix the problem temporarily, but then inevitably it comes back.  Sometimes within seconds, sometimes minutes, sometimes 30 minutes.
 
There were no new program installs correlating to when this problem happened - but of course several programs update themselves all the time.
 
I can't find a pattern,  Not sure if this is a software or hardware issue so wanted to check here first before shipping the laptop off which is hard to do because I use it all the time for work.
 
Any questions? Let me know.
 
Thanks,
-Willie

A:Sporadically unable to switch apps, scroll, mouse click on laptop

FWIW,
 
I followed some of the advice on this entry:
 
http://www.bleepingcomputer.com/forums/t/576893/100-cpu-usage-pages-unresponsive/
 
And ran those programs.  I've been trouble free for several hours now.
 
So far the computer is also running faster.  I was also battling some slowness issues, but wanted to focus on just being able to use the computer for now.  Perhaps the problem has been solved...

4 more replies
Answer Match 48.3%

Hey guys,

My HP Pavilion dv6 3132tx has been making a beep and click noise every now and then for quite a while now (4 months +).

The noise is a beep (lasting around 1/2 second) followed by a click (and sometimes it is a beep followed by another beep of a lower tone). It happens when I am logged into windows and there are no beep codes on startup, the speakers are muted too so it's not a background noise or anything. There also does not appear to be any pattern and the beeps occur randomly, whether it be me gaming or browsing the internet.

I have tried checking the hard drive for errors by using the bios hdd checking tool, chkdsk and hdtune. All of those said that the hard drive passed so I have no idea what the problem could be.

Thanks in advance!

GCFSA

A:HP Pavilion notebook making beep and click noise

It may be hardware errors unfolding. For safety in case it gets worse, 1st of all (if you haven't done so aleady), do some backup'ing by imaging your disk (or as a minimum copy all your personal\important files) to an external media.

3 more replies
Answer Match 48.3%

My laptop is extremely slow and getting slower. i find that windows takes a long time to open with frequent internet disruptions. If I have 2 or 3 windows open at the same time almost all the functions or applications on those windows creep open or fail to perform almost freezing. I know it has to do with some sought of malware, but after running microtrend and spybot, it doesn't seem to get any better. I ran my virus scan using ESOT. What should I do? I have recently started using facebook and some of the games connected to it. Could this also be a factor? I use mozilla firefox internet browser and have noted that there are a few glitches with there program in regards to saving the correct URL under bookmarks? I ran hijack and saved the results to my desktop.
 

A:Help I may have to chuck my laptop

6 more replies
Answer Match 48.3%

Recently had virus remove by home depot cannot pull up notting on are access internet, No tool bar,
 

A:struck like chuck

Hi,
Have you tried the solution here at Microsoft site?

http://support.microsoft.com/kb/962963#letmefixit

Richard
 

2 more replies
Answer Match 48.3%

When logging on, these failures or errors appears, ccwin.9exe- application failed Frdb.dll, NDA Error, AiO Software logo appears, Windows Installer appears, usually one after the other
 

More replies
Answer Match 48.3%

i recently had to reinstall windows xp back on my compaq pesario 6000..but when all was done and it was up and running..my sound was no longer ther..if ther is anyone out there that could help me by tellling me what sound card is installed in this type of pc and where i can find the driver to install it back..that would be of great help to me..thank you in advanced slimgirlz72
 

A:soun card please help

You perhaps need to install the sound drivers from the www.hp.com site, and perhaps other downloads, by entering your Persario model, then downloading all the drivers and updates.
You will also need to install all the Microsoft updates, using Internet Explorer 7.0 from the www.microsoft.com site.
 

1 more replies
Answer Match 47.88%

i have acquiress an IBM laptop T30. HAve re-format and reloaded all drivers but i still cannot get media player to play sounds. I have been thro' all wizards but stil get no answer from it ..any suggestions please ...i have tried searching for solutions on here but cannot see any answers thanks
 

A:laptop soun problem

Open up device manager, and have a look to see if there are any unidentified devices or devices that have problems (shown with a yellow warning triangle)
 

2 more replies
Answer Match 47.88%

My friend has an OLD Tandy computer runing Air Combat, it has been running for years, he has had it installed in a little wooden airplane so the kids can sit in the plane and play the game, now for some reason, when he gets into the game it tells him to insert disk 4, he doesn't have the original disks. The Tandy has a hard disk and a 3.5" floppy and the game is loading from DOS. I have a copy of Air Combat for my grandkids but it is on CD and I have no way to convert it to floppys. Any ideas ?
Fred
 

More replies
Answer Match 47.88%

Please help! I'm sometimes getting The Bluescreen, can't open Yahoo Internet Explorer or Mozilla in Normal Mode w/out crashing(only able to work in SafeMode w/ networking). I've got a Dell Dimension E510 and had a guy out to repair for $80 and it worked for about 2 hrs. then crashed again. Malwarebytes can't find anything. AVG Free 8.5 finds nothing. McAfee is showing computer not protected. Should I invite people to come watch me chuck this piece of crap off the 3rd floor and get a Mac? Someone save Mr. Dell please! I'm losin' it here! Thanks.The Dude

A:About to chuck tower off balcony and get a Mac

Moved from HJT to a more appropriate forum. Tw

5 more replies
Answer Match 47.88%

I dont know what to do i think i have some major issues with viruses , and i have reinstalled my system and .................................ogfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:00:56 PM, on 25/04/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Common Files\Symantec Shared\SPBBC\SPBBCSvc.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Symantec\LiveUpdate\ALUSchedulerSvc.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Norton Internet Security\Norton AntiVirus\navapsvc.exe
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\ehome\ehtray.exe
C:\Program Files\TOSHIBA\ConfigFree\NDSTray.exe
C:\WINDOWS\System32\DLA\DLACTRLW.EXE
C:\Program ... Read more

More replies
Answer Match 47.88%

Security experts say that various types of botnets have infected millions of computers worldwide to date, but Chuck Norris is unusual in that it infects DSL modems and routers rather than PCs.Full Article: http://www.computerworld.com/s/article/915...d?taxonomyId=17

A:Chuck Norris Botnet

Simply switch off the router and then turn it back on, and poof it goes.

9 more replies
Answer Match 47.88%

Hello friends
i am unable to get sound from the external speakers , when the speaker jack is connected to the cpu i hear sound from the internal speakers, how do i get my external speakers working

regards
Shiv
 

A:Unable to hear from the hear external speakers

shiv said:





Hello friends
i am unable to get sound from the external speakers , when the speaker jack is connected to the cpu i hear sound from the internal speakers, how do i get my external speakers working

regards
ShivClick to expand...

How about some more info about your system man?

http://www.techspot.com/vb/topic33297.html
 

15 more replies
Answer Match 47.88%

Seems like this happened after using my car's Bluetooth or after the Denim upgrade not sure. Occasionally, I can hear after leaving my headphone Bluetooth on and switching to phone but it is just for that call. After I hang up, it goes back to me not hearing the person on the call.

More replies
Answer Match 47.46%

I have i big problem with my sound card i cannot hear any sound...the speakers are working....I have a gigabyte GA-7N400S motherbord, AMD Athlon 2400+, 768DDR, Radeon 9200, HDD:WD160GB....I only use the integrated sound card and i tried several drivers but in doesn`t work

please help?????
 

A:major soun card problem

Try to download the drivers for your sound card from HERE . It's the fourth in the list.

Good luck!
 

7 more replies
Answer Match 47.46%

hi all,

my using windows 7 ultimate RTM build 7600. by running a windows update i am able to download my intel GMA driver but yet i dont get my realtek high definition audio drivers.


plz anyone help!!!

A:cannot download reltek soun drivers

plz anyone help me

2 more replies
Answer Match 47.46%

I have a HP2570P Elitbook laptop, which came with Windows 7 Pro 64bit and was then upgraded to Windows 10 Pro 64bit.  The sound is not working, in that if I use Microsofts sound driver, the physical mute button is white and the sound bar is moving (if I play a youtube video for example). Same wih IDT driver.  I have also tried Realtek driver and Windows 7 Pro driver on Windows 10 OS.   It is driving me mad, trying to fix it; someone please, please help.  Thank you.

More replies
Answer Match 47.46%

After getting this comment on another page where I asked for help, I thought I should post my problem here in order to try and find a problem.

"Considering that both Firefox and IE are affected, and then you find that Chrome doesn't work either, my 'gut' tells me that the problem is with the operating system or the sound drivers.
Try a Windows 8 support forum, or Microsoft support. Or maybe support techs for that brand PC, if it is still under warranty. http://www.eightforums.com/ Support - Windows Help "

Hello.
Yesterday, (9/9/14) I was watching videos on my PC, using FireFox, in the evening I went and had a shower, I got back and without any apparent reason, FireFox stopped producing sound.
I installed Chrome after checking all the basics, and Chrome does have sound, I can watch videos on Chrome with sound.
I have tried Youtube, MSN, FilmOn, Facebook (Games and Videos), Game sites, SoundCloud, and there is no sound. I opend IE, and tried the same, and got no sound,
There is sound on my PC, if I open a MP3 in WMP it Plays, Windows system sounds play, Yahoo sounds play, Skype sounds play, I can hear them loud and clear. TheSims 4 plays sound.
I have done the following: Updated Flash, VLC, Java, Shockwaves, QuickTime.
Updated FireFox Updated FireFox Pluggins, Followed all steps here: https://support.mozilla.org/en-US/kb...und+in+Firefox
Updated RelTek,
Uninstalled FireFox, Swiched Default browser from IE to FireFox and Chrom... Read more

A:I have no sound on FireFox, IE and Chrome, But yes PC soun

Others have had same/similar problem as indicated by a Google search. You probably have done this but I'm not taking anything for granted. Hopefully there is a solution listed that you haven't tried.
https://www.google.com/?gws_rd=ssl#q...+have+no+sound

Rich

1 more replies
Answer Match 46.62%

my Excel spreadsheet receives online quotes from a DDE link. How do I setup an alert to activate a sound when the content in a certain cell reaches a pre-determined value. Add a example.

Thanks
 

More replies
Answer Match 46.62%

No sound after fixing DVI/VGA (or something like that) to get monitor out of sleep mode.  Computer works but I get no sound, no microphone, no pc camera. Troubleshooter says correct driver is installed.  Can anyone help?

A:troubleshooter says right audio driver installed but no soun...

Dianakaymonica, welcome to the forum. The first thing that you should do is go into the Control Panel / Sound to assure that your sound device is chosen as the Default.  Also, go into Recording to assure that your microphone is set to Default.  This has been a problem with Win 10. Please click the Thumbs up + button if I have helped you and click Accept as Solution if your problem is solved.

1 more replies
Answer Match 46.62%

why does my DVD slide tray open and close continuously for long periods of time. It just starts and stops without any reason. I am operating windows XP on a Compaq Presario. Is this a virus or bug? I have tried spybot, but this does not help. If I turn off computer overnight, this helps for a day or two, but it will start oscillating again for no apparent reason. Thanks for any info. Chuck
 

More replies
Answer Match 46.2%

I recently updated my Lenono Ideapad Y510P to Windows 10, and after a couple of weeks, I started having this wierd problem with my sound. For some reasons, I always had 2 sound outputs, 1 actually being my speaker, and the other being a random "fictional" speaker. However the fictional speaker was set as default to play some of programs, for an example Counter Strike, which resulted in me not being able to hear what was going on in CS. I tried to deactive the "fictional" speaker in the playback options, but for some reason I couldn't deactive it .. So of course, I uninstalled my drivers, and tried reinstalling. However, my big problem now is, I can't install the driver again. I tried both downloading the driver from your website, downloading the Realtek Audio Driver specifically for my computer (however it was for Windows 8.1, no newer version), and I tried downloading the driver from Realteks own website for Windows 10. Both did in fact start the installation, but after saying "You need to restart in order for the driver to work (or something like that)", nothing happened. I didn't have the driver, nor the Realtek program and worst of all, my sound still isen't working .. Is this a virus, or am I just missing something really important? I hope someone's able to help me! And i hope I posted this in the right forum, if not, someone please move it to the right one

More replies
Answer Match 46.2%

Dear all that are reading,

I currently have a Sony Vaio laptop that has a HDMI output. I want to use a HDMI cable to connect my laptop up to a Samsung UE40B8000XW LED TV. The TV does have numerous HDMI inputs. (Please bare in mind I havent yet purchased the TV yet)

For sound I connect up my BOSE sound system using the 3mm stereo jack on the laptop.

Ok the situation is I still want to use the BOSE sound system when I connect up my laptop with the TV (Output cable from BOSE is only a 3mm stereo plug). The question is does the HDMI cable transfer sound to the TV and I will have to hook up the BOSE system to the TV or can I still hookup the BOSE system to the 3mm jack on the laptop and still get sound?

Any advice and help much appreciated.

Many thanks

Slickbone
 

A:Laptop to LED TV hookup with HDMI cable (Soun advice)

HDMI does transfer audio if the laptop supports it, but you can still use the stereo jack for audio if you so wish - just mute the audio on the TV.

If the laptop automatically switches to audio through the HDMI then you can go to the Control Panel and switch it back to the normal sound card.
 

2 more replies
Answer Match 46.2%

I recently updated my Lenono Ideapad Y510P to Windows 10, and after a couple of weeks, I started having this wierd problem with my sound. For some reasons, I always had 2 sound outputs, 1 actually being my speaker, and the other being a random "fictional" speaker. However the fictional speaker was set as default to play some of programs, for an example Counter Strike, which resulted in me not being able to hear what was going on in CS. I tried to deactive the "fictional" speaker in the playback options, but for some reason I couldn't deactive it .. So of course, I uninstalled my drivers, and tried reinstalling. However, my big problem now is, I can't install the driver again. I tried both downloading the driver from your website, downloading the Realtek Audio Driver specifically for my computer (however it was for Windows 8.1, no newer version), and I tried downloading the driver from Realteks own website for Windows 10. Both did in fact start the installation, but after saying "You need to restart in order for the driver to work (or something like that)", nothing happened. I didn't have the driver, nor the Realtek program and worst of all, my sound still isen't working .. Is this a virus, or am I just missing something really important?
I hope someone's able to help me!

More replies
Answer Match 46.2%

I recently updated my Lenono Ideapad Y510P to Windows 10, and after a couple of weeks, I started having this wierd problem with my sound. For some reasons, I always had 2 sound outputs, 1 actually being my speaker, and the other being a random "fictional" speaker. However the fictional speaker was set as default to play some of programs, for an example Counter Strike, which resulted in me not being able to hear what was going on in CS. I tried to deactive the "fictional" speaker in the playback options, but for some reason I couldn't deactive it .. So of course, I uninstalled my drivers, and tried reinstalling. However, my big problem now is, I can't install the driver again. I tried both downloading the driver from your website, downloading the Realtek Audio Driver specifically for my computer (however it was for Windows 8.1, no newer version), and I tried downloading the driver from Realteks own website for Windows 10. Both did in fact start the installation, but after saying "You need to restart in order for the driver to work (or something like that)", nothing happened. I didn't have the driver, nor the Realtek program and worst of all, my sound still isen't working .. Is this a virus, or am I just missing something really important? I hope someone's able to help me! And i hope I posted this in the right forum, if not, someone please move it to the right one

More replies
Answer Match 46.2%

Help!
I can't get sound on DVD's , but I can hear youtube, downloaded clips, etc..
I've tried to find the problem, but no luck. I'll take the my laptop in, but If it's an easy fix..
Thanks!
 

A:Can't hear movies, can hear downloads

this sounds like a codec issue. download all in one codec at
http://www.free-codecs.com/download/Codec_Pack_All_In_1.htm
 

8 more replies
Answer Match 46.2%

I have a toshiba satellite A215 S7444 laptop when i turn my comp on i get a high pitched whining sound .my sound hasnt worked for a long time,ive had every tom ,dick and harry attempt to resolve this problem any ideas?
 

More replies
Answer Match 46.2%

Hi guys

I have this problem, for quite some time now and i can't for the life of me...fix it.

When ever i'm talking to people on any kinda of voice chat application, like Skype for example they can hear what i hear clearly, and sometimes even better than me. It's not only annoying for them...but annoying for me as well when i have to listen to them complaining about it.

I read that some onboard soundcards have those problems, and they can't be fixed. Don't tell me this is true. I've tried almost everything my intelligence possibly allows me to, please assist a tired old man in his seemingly futile atempt to save his soundcard from replacement.

Thank you
Izgol
 

A:Realtek (people hear what i hear)

Hello Izgol. Welcome to TSG,

You could try muting Stereo Mix in your sound settings.

For XP:

Click on Start > Control Panel > Sounds & Audio Devices.

Choose the Audio tab then click on Volume under Sound Recording.

Click on Options, put a check next to Stereo Mix and click OK.

Under Stereo Mix click on Mute.

Hopefully this sorts out your issue.
 

2 more replies
Answer Match 46.2%

I am running windows 7 and it has Realtek HD Audio Manager. I have speakers plugged into 3.5mm jack in rear of computer and my Razer headset plugged into my 3.5mm front panel. When I am in any sort of voice chat such as skype, google chat or an in game (computer game) chat, everyone in the call can hear everything I can hear, as clear as they can hear me. It?s not my mic picking up sounds.. I can unplug my speakers and mute/unplug the mic cord and they can still hear all my sounds. I can unplug my headset and speakers completely so I have no mic or spearkers or audio equipment hooked up at all and they can STILL hear my everything. youtube, games, ect. I have read other forums that say to "disable "stereo mix" or "what u hear"" but that option is not on my computer. Any help would be AMAZING. Thanks

A:Everyone in any voice chat can hear everything I hear. PLEASE HELP

moehamster Welcome to the Seven Forums.

Open the Windows playback properties and select Speakers. Next click on Properties and click on the Levels tab, and if present and unchecked, mute the mic.

1 more replies
Answer Match 45.78%

Quote:
If you haven't changed the default password on your home router, you may be in for an unwanted visit from Chuck Norris -- the Chuck Norris botnet, that is.

Discovered by Czech researchers, the botnet has been spreading by taking advantage of poorly configured routers and DSL modems, according to Jan Vykopal, the head of the network security department with Masaryk University's Institute of Computer Science in Brno, Czech Republic.



More here --> Chuck Norris botnet karate-chops routers hard - botnet, Chuck Norris, Czech Republic, D-Link - PC World

A:Chuck Norris botnet karate-chops routers hard

I can't even get into mine I can't remeber how to find the default password.

2 more replies
Answer Match 45.78%

Chuck Norris Botnet Karate-chops Routers Hard.

If you haven't changed the default password on your home router, you may be in for an unwanted visit from Chuck Norris -- the Chuck Norris botnet, that is. Discovered by Czech researchers, the botnet has been spreading by taking advantage of poorly configured routers and DSL modems.

-- Tom
 

More replies
Answer Match 45.36%

Navigating to Settings > Personalization > Themes > Theme Settings, we get to the Personalization window for Themes same as on Win 7. In the window it states "Click a theme to change the desktop background, color, and sounds all at once."
However, the icons normally at the bottom of the window to change those settings are missing. All I can do is save the theme (right click).
Any insight on this is appreciated.

-John

(window capture missing icons)
(these are the icons I'd expect to see)

A:Can't change Theme settings for Desktop Background, Window Color, Soun

What you're looking for does not exist in Windows 10, to change some of these things go to settings>personalisation.

6 more replies
Answer Match 42.42%

Hi just downloaded a Express Scribe yesterday. I am a transcriptionist. I use a foot pedal. The welcome file comes in loud and clear but I cannot hear any other files that I download. I have a Windows 7.
I do not know what to do and my boss is waiting for the transcription today.
Thank you for any help!!!
 

A:Can hear the Welcome file but cannot hear anything else

Also, I sent the file to a friend and she had no problem with it!
 

1 more replies
Answer Match 41.16%

Hello. Using vb.net, I've been trying to figure out how to paste the clipboard into the window your mouse pointer is pointed.

If anyone has used unix you are familiar with what i am asking for; just to double right click or middle click and to paste the content of clipboard to the given window.

Can anyone offer any ideas for .net?

I would use double right click, or middle click, or single right click.

Please respond with your ideas~

Thanks

-Sandra
 

A:Help me paste clipboard text with double right click (or right click, click)

This is kind of confusing but I just wanted code to paste the clipboard by using the mouse.
 

2 more replies
Answer Match 41.16%

Hi.My laptop model is hp 15g009ax.When i stop hearing song or any audio in earphones, after approximately 6 seconds I hear a quick crackling sound. The crackling sound comes after any sound that ends or After the specific application that is playing the audio is closed). I will tell you what is did to stop this.1) I updated the sound driver from hp support website specific to my model. Didn't work2) Tried the earphones in other phones and lapotps. Working fine.3) Thought the problem is with windows. So dual-booted windows with Ubuntu 14.04.1. When I tried Ubuntu without installing it, earphones seemed to work fine without crackling after sound ends. But after installing Ubuntu and checked, the same problem repeated, but this time crackling sound started coming before the sound starts and after the sound ends.This is very irritating and after reading some articles about this problem, Some said the problem is due to interference(Not sure) of motherboard with soundcard.Can you please specify the source of this problem and a solution to it.Thanks In Advance

More replies
Answer Match 39.48%

I have Windows 7 Professional on my PC. In the first load I had, the PC should automatically detect if the LAN cable was plugged in, turn off the wireless radio, and change the network icon in the right bottom corner to reflect the cable was now in use.
Unfortunately, I had to reload my PC, and since then I can't get it to do it again.
So, what I'd like to achieve is this: Have Windows automatically detect when the cable is plugged in, turn of the wireless radio, and change the network icon in the right bottom corner to reflect the cable is in use - and, obviously, vice versa.
Can someone tell me what I need to do, please?

A:Have Windows 7 automatically switch to LAN when cable is plugged in and switch to wireless when it's removed

Hi,
There are two methods can help you.
1. Go to <Network and Sharing><Change Adapter Settings> and right click your wired and wireless adapters one at a time to change the properties. Select IPv4, click <Properties>
then click <Advanced>. For each one, clear the "Automatic metric" check box and assign the metric value manually. Setting your wired adapter?s metric value lower than wireless adapter one, such as ?1? for wired adapter and ?2? for wired adapter.

2. Go to <Network and Sharing><Change Adapter Settings>,
hold down 'alt' to bring up the "File" menu, select "Advanced", select
"Advanced Settings" from the dropdown menu, adjust the priority of your wired adapter higher than your wireless adapter in the "Advanced Settings" window under the "Adapters and Bindings" tab.
Hope this helps.Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

3 more replies
Answer Match 39.48%

Need to no if I have this right

they have a dsl modem going to a Linksys router to a 24 port switch then to a little 4 port switch. sure, so then Would it be modem to router then router to any port on the big switch or is there an uplink port on the big switch it should go to? then you would hook a cat5e from one of the regular ports on the 24 port switch and run it to the uplink port on the 4 port switch need to no if the whole sequence is right. Hope someone can help, john will told me the cable would go from the big switch to the uplink on the small switch but I am wondering if I have it all right or not and wonderiing about from the router to the 24 port switch does the cable just go in a regular port in the big switch or if there is an uplink port does it go there. Hope you can understand my rambleing here. Thanks (please don't send me to a link) just need to no modem to router to regular port or uplink port on 24 port switch then from regular port on 24 port switch to uplink port on the 4 port switch. Thanks
 

A:Solved: Windows xp hookup question for modem, router, switch, to switch?

Router to uplink port on 24 port switch, and then normal port on the 24 port switch to uplink port on the second 4 port switch. An auto-MDX port on a device negates the need to worry about uplink ports for that particular cable connection.
 

3 more replies
Answer Match 39.48%

I have a wireless router connected to my modem, and ALL PC's connect to that for internet.

I also have a gigabit switch I use to transfer data in between several of the machines. I do it quite often and I don't want it eating up the wifi bandwidth.
I have done it before, but it has been a long time and I cannot remember how I forced internet traffic over the wifi and local traffic through the switch
Is the only way to do it to specifically tell Windows to use the IP address of the LAN connection? I know it will work that way, forcing local traffic directly to that IP, but I seem to remember there being an easier way to do this.

Thanks.
 

More replies
Answer Match 39.48%

Am a new Networking BEE I had built a small network of 20 systems at my office and there I had connected a switch and router.

All the switch ports have been covered by all the systems and one port is given to the router
switch(20)----router(LAN)
|
|
|
HUB(8ports)

And also I connected a HUB to the switch ..

It works fine for my internet connections to all the systems but how do i make authentication of passwords and username to my network systems from one server which I use server 2003 at one system

let me know the detailed step by step procedure to build.........

I would feel very happy If at all any Suggestions for me to make my Business grow.....

As early as possible ................

Thanks in Advance

Smiles....[][]
 

A:Connection of Router to Switch and also a Hub to Switch - N/W systems internet share

>>I use server 2003 at one system

you need to enable Network Login, but that requires that win2003 have

a domain controller
a DHCP service
and a DNS service.
the Domain Controller is just another name for LDAP and it becomes the control point
for all systems.

get some books on Configuring Win2003 Server
 

4 more replies
Answer Match 39.06%

One question I need to know

If you go from DSL modem to Router then Router to switch
my question is then
If I wanted to hook another mini linksys switch into the bigger switch would you run the cat5e cable from the first switch to a reg port in the second switch or would you run it to the uplink port and then hook the 1 or 2 computers into the reg ports of the second switch.??
 

A:Solved: Windows xp-question of hookup switch to switch?

Obviously, run it to the uplink port if available.
 

3 more replies
Answer Match 39.06%

hi all,

system gets hang, pc configuration is intel 865bgf motherboard with PIV 3ghz ht processor with 80 gb samsung hdd and 266 mb ddr i reinstalled the operating system (xp pro) changed smps and changed 256 ddr but the problem still continues, when the system gets hang i am not able to use my keyboard or mouse i have to restart the system , please help me and also i have to know weather is this the hardware issue or the software issue, and also i am facing same problem with same configuration with the other customer pc .
warm regards,
pradeep
 

A:system gets hang (it freezes) only option is to switch off and switch on

12 more replies
Answer Match 39.06%

Hi everyone, I searched through the forums but couldn't really find what I was looking for.

Currently we have a DHCP server set up to a switch, that has a special line connecting to a switch in our shop which is just across our back lot, giving network access to the few computers over there. They recently put in a new machine that needs network access, but they have already accidentally cut two ethernet cords. I'm looking to provide a wireless solution for the machine, but I don't want to have to spend a few thousand dollars on a large wireless switch.

Can I plug a wireless router into the switch in our shop, and essentially turn it into a wireless bridge, or is there another, simpler way to do this?

If this has already been answered, sorry for missing it!

Thanks!
 

A:Solved: DHCP Server -> Switch -> Switch -> Wireless

While you could use a router, or even configure the router to act as an access point, why not just buy a true access point? They start at $27: http://www.newegg.com/Store/SubCate...ame=Wireless-AP-Bridges-Repeaters&Order=PRICE
 

2 more replies
Answer Match 39.06%

Is it possible to switch off a laptop screen - laptop runs Windows 7 - and prevent it being switched on again, without inputting a password?

I need to keep the laptop running, therefore I can't put it to sleep and logging-off has become a pain.

I've tried the Power Options, but the display comes on again when the mouse is nudged.

I've also tried "Fn + F6" on my Acer laptop, which switches off the screen, but an accidental key press brings it to life again.

Any ingenious little prog around? None I've seen have that crucial password privacy aspect.

A:How to switch off laptop screen & password protect switch on again?

a password is is used when you are out but if you are home you don't need a password.. unless you don't trust somebody...

3 more replies
Answer Match 39.06%

Hi Folks

Ideas wanted

I've got two computers -- an old one with Win 95 on it -- it has two hard drives and likely the processor just before Pentuims came into existence.

Ive got a better one too, P4 1.6g with 80ghd. with 786mb ram. The second was supposed to be built for video editing but as time went on, its started to do the jobs of the previous one as well.

What Id like is to speed up the slower one so that I wouldn't be so reliant on the faster one. Like right now Im thinking of installing a second HR in the faster one to separate the video files from the program files however I wont be able to do my day job work without it.

I would like the slower one to be able to do some accounting, go on the net, email and MS word. I have Quickbooks program but it will only run on W98 not 95.

Is it worth spending money on the slower one to upgrade to w98 or would I be better off putting together a faster one for video and using the current fast one for the other work?

Off the shelf, they want $800.00 for a P4 350ghz with a 250g hd (which Id have to add a second drive for programs) with 1G of Ram

budget is a little south of zero. Any creative suggestions?

speaking of costs.. is it cheaper to buy components seperately and try to put them together yourself? - maybe use one of the previous towers? Ive never built a PC.
 

A:"use it or chuck it?" that is the question.

6 more replies
Answer Match 39.06%

Hope I am in the right place, my problem is when I try and use media center it tells me I do not have the correct codecs installed. I have just completed a new install of the OS (xp media center) I have went to the Microsoft site and have had no luck, I downloaded a couple of things I thought might help. I have not tried the media center since the new install. Below is the actural message on the screen of the media center when I try and run a DVD.


DECODER ERROR

The video recorder has either malfunctioned or is not installed. Please restart Media Center and/or the computer.

Any ideas

Thank you ahed of time for any help and or advice.

Chuck Ludwig

A:Plain "old" Chuck

I used the title in the wrong way on the previous post hope to get better response on this one.

========================================================
========================================================

Hope I am in the right place, my problem is when I try and use media center it tells me I do not have the correct codecs installed. I have just completed a new install of the OS (xp media center) I have went to the Microsoft site and have had no luck, I downloaded a couple of things I thought might help. I have not tried the media center since the new install. Below is the actural message on the screen of the media center when I try and run a DVD.


DECODER ERROR

The video recorder has either malfunctioned or is not installed. Please restart Media Center and/or the computer.
Any ideas

Thank you ahed of time for any help and or advice.

Chuck Ludwig

2 more replies
Answer Match 38.64%

on calls I can hear but caller cannot hear me

More replies
Answer Match 38.22%

i have this sr224 switch and i like to connect it to my giga network sr2024 switch.
now, i plug a utp belden cat5e to port 1 of sr224 and the other end to port 1 of sr2024.
what i got is the whole panel lights of sr224 will blink very fast.
is this normal? or sr224 and sr2024 cannot be paired?

thanks in advance guys
 

More replies
Answer Match 38.22%

I thought that I had this all figured out, but my dad just asked me a question about my setup, and I can't answer it.

The setup is like this:
[ip-phones + computers]-->[small switch]-->[managed L2 switch]-->[router]-->[modem]

I have several ip-phones and computers grouped into blocks of 8. Each set of 8 is a medley of phones/computers connected to a small switch http://www.linksys.com/servlet/Sate...nksys/Common/VisitorWrapper&lid=3681322279B34

Each of these switches, in turn, will be connected to a managed L2 switch http://www1.ca.dell.com/content/products/productdetails.aspx/pwcnt_3448p?c=ca&cs=calca1&l=en&s=biz that will create 2 VLANS: One VLAN will contain all of the phones, and the other will contain all of the computers. In turn, each VLAN will have its own router and DSL modem, thereby separating the network traffic.

I know that I can use this L2 switch to make the VLANS based on the MAC addresses of the devices. However, the smaller switches do not support 802.1q [VLANs]. Will it be a problem that the smaller switches do not support VLANs? Essentially, will this setup work to split up network traffic?

Thanks once again,
-Roger
 

A:Computer, switch, switch, router, modem

I have the same DELL switch for my phones. You PoE will not carry across the linksys switches, so that is the first problem.
Next are the computers attached to the phones? Or does each device get its own drop?

And whats this about 2 routers and modems? Thats a bit over kill!! QoS would do the trick.

I would run all the devices off the Dell and attach the computers to the Phones (most IP Phones have a passthrough port) Configure the Dell with trunk ports with the Computer VLAN passing untagged traffic making it the native VLAN. While having the phones on a Tagged VLAN(If you phones conig allows you to set the VLAN in its config great! If not you can bind the MAC to the VLAN). The you create a QoS policy giving the VoIP traffic priority!
 

3 more replies
Answer Match 38.22%

Can any one advised me

I want to implement network on 6 Floor , 12-12 Port on each portion in one floor, total 24 ports on each floor keeping in mind distance between the each floors how do i connect them with fiber cable (which fiber cable i required) so speed remain constant for all floors.

How is my Idea to implement...right from server room in 1 floor where all internet connection providing to each floor. Cascading from 1 to 2 , 2 to 3, 3 to 4, 4 to 5, 5 to 6. UPon this setup...do i get into a low speed bandwith comparing to 1 floor Network. Does Network Gets slow by connecting through Cat5 UTP cable in cascading example.

Please adviced me.

-Thank Q>
Shiraz
 

A:How Can i Connect Gigabyte Switch to Gitabyte Switch

15 more replies
Answer Match 38.22%

Hi Everyone.....
So, I just got Wireless Broadband hooked up in my business. I hooked the LAN to the Router and then hooked up a 16 port gigabit switch. I have three terminals coming out of it (in the bcak of the building) as well as a line running to the front of the building. At the front of the building I have the line going into another 16 port gigabit switch. I have 4 computer terminals coming out of that switch. I AM getting internet at the back of the building .....but nothing at any of the terminals after the second switch (front of the building). Can someone help?

Thanks!
 

A:Router to Switch to Switch.....No Internet at end terminals

7 more replies
Answer Match 38.22%

Hi, guys. I have connected Huawei switch S5700-24TP-SI-AC with Cisco switch 2960 using one single fiber with LX SFP. The port is up on one side (Blinking on Huawei side) and down on Cisco side...Please help.
 

A:Huawei switch vs Cisco switch, How to connect

What kind of 2960 switch do you have? Have you checked the interface to verify the switch recognizes the optic and all the stats report back as normal? Are you using a Cisco branded optic? Do you see light being shot out from the optic in the 2960?
 

2 more replies
Answer Match 38.22%

Hello,

I use windows 7.
When I turn on laptop (acer Aspire 5742) cannot connect to internet until I switch user and log in again. Soon as I touch any browser icon the rest of computer stops responding as well. It's only me on computer. Have virgin media security/ spyware/ virus protection. Tried CCleaner. After I switch user everything is fine.
Additional info; On 16th October had great difficulty getting my emails from Yahoo. Sometimes sign-in box appeared without my security signature and different style of writing for browser remembered log-on details.

Cheers,

Gordon.
 

A:Solved: have to switch user to continue after switch on

11 more replies
Answer Match 37.38%

A problem has recently developed with my Envy notebook.   About 2 weeks ago my entire wireless network began slowing down when on it.   Noticeable on all devices.    When my provider came out, checked and tweaked some issues it appeared to be ok.   I went on with my daughers HP laptop and was drawing 20-24 mbps all over the house. When I reconnected mine to the system I was only pulling 6, 3, 5, up and down.   It doesn't start right away but after a few minutes.   So I put my duaghers right next ot mine and low and behold, when I ran her's it pulled 3 - 6 also.   So I turned my wi-fi off and hers' popped right back up.   I have also tried this with an old XP mini, my i-pads etc.   As soon as mine gets on the network the speed crashes.    This also happens with no one else home and no other devies conncted. I have downloaded the latest up to date Intel driver for this network adapter and it hasn't changed anything. Any ideas?

A:ENVY Notebook - m7-k111dx w/intel 7260 - notebook sucks dow...

Bill_Ving Hello;Allow me to welcome you to the HP forums!I read your post about wireless networking poor performance and wanted to help. My immediate guess is that you might have mixed-mode networking going on.  This happens when you have two different PCs networking in two different modes -- one using "G", the other using "N".  The wireless router (or access point) can optimize performance for either mode, but not for both.  So, the "G" mode drags down the performance of the "N" mode PC, but even worse, with the router set for mixed modes, it performs more slowly than with either PC connected by itself.Here are some other troubleshooting steps you can try: HP PCs - Troubleshooting Wireless Network and Internet (Windows 8) | HP® Customer SupportGood Luck========================================================================I am a volunteer and I do not work for, nor do I represent, HP.---------------------------------------------------------------Please click "Accept As Solution" on the post that solves your issue to help others find the solution.Please click the Thumbs-Up symbol on the left of the Reply button to say thanks fopr my help.========================================================================

1 more replies
Answer Match 36.96%

I made a Google notebook to keep the minutes of a meeting my business partners and I held last weekend. I made them all collaborators on the notebook so they could all make any changes or annotations they felt necessary. However, when they go to access this notebook they are prompted for a password.

There is nowhere (at least that I can find) to even choose to password protect the notebook let alone change the password. I'm pretty confused as to what password the notebook could be. The only thing I can think of is that it's asking for the password to my gmail account, which I don't really want to be handing out. Any ideas on this one gang?

Stink
 

A:Why do Google notebook collaborators need a password to access the notebook?

6 more replies
Answer Match 36.96%

The hinge on my much-loved Notebook has become 'loose'. Can I find repair help locally? Baltimore,  MD area. What is the correct term(s) to use to describe the problem? 

A:TouchSmart Notebook TV notebook swivel hinge repair?

https://www.google.co.in/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=hp%20service%20center... You can tell them that the hinges are loose 




Regards;SmileyI am an HP employeePlease click the White Kudos star to say thanks for helping.Please mark Accept As Solution if my help has solved your problem.

1 more replies
Answer Match 36.96%

We are moving to a new office location. The guys who will be setting our network is proposing the following equipment:

1. 3Com 24-port 10/100 mbps switch
2. 24-port Patch panel
3. 6u data cabinet
4. 1u cable management

The new office will be a 2-floor building with around 40 computers. I asked some of my friends who are more expert on network setup and told me typical switch (Linksys, Cisco) will do if we need to save some money.

What do you think? Thanks a lot!
 

A:Is 3Com 24-switch necessary or typical switch will do?

Well, first off, I'd be specifying a gigabit switch for expandability, I can't see investing in a 10/100 switch in 2010! If you don't need a managed switch, or need to save money initially, and unmanaged switch will probably be significantly cheaper.

In point of fact, if you want to go really cheap, you can get away for less than $100!

http://www.newegg.com/Product/Produ...igabit switch&bop=And&Order=PRICE&PageSize=20
 

3 more replies
Answer Match 36.96%

Hello all

I just installed 4GB ram on my 32 vista and it only recognized 3GB in the os (vista 32) and all 4GB in the bios. so I decided to use the /3GB Switch, by using that command in bcdedit, it all worked good. The problem is now I have 3069 mb physical memory and ONLY 209 mb Kernal Memory!!! so I used the "bcdedit /deletevalue IncreaseUserVa" and bcedit said it worked successfuly so i restart my pc and it STILL had the same memory! so right now im stuck with only 209 mb Kernal memory! any ideas on how to fix this? I looked all over google and found nothing. Should I keep these settings or try and fix it?how do i fix it?
 

A:3GB switch will not switch back, vista 32!

I am not too familiar with those commands you speak of, but I do have a question: Is the video card built into the motherboard? If so, what amount of system memory is being shared with it? Besides that, I have no more ideas to offer you. Sorry
 

3 more replies
Answer Match 36.96%

I understand that a hub is more like a party line, where all devices hear and read data before sending it to next port, and a switch is advanced hub. But, what is a router. I know what a wireless router is, but they say a router is more advanced than a switch. Can you buy a non-wireless router?

Also, can you connect 2 switches together? So, Modem-----to Switch----to Switch----Computer

And both switches have other devices connected?

A:Hub vs Switch vs Router/ 2 Switch Story

you CAN buy a non-wireless router--but--the two I found on Amazon were only 10/100 (most modern systems use gigabit ethernet 10/100/1000) but wired are generally cheaper than a wireless router(the Cisco below is NOT cheap)--however--it's not necessary to use the wireless part of the wireless router as most have at least 4 ports (wired).

Yes you can connect switches together but they won't allow for multiple computers to connect to the Internet (at least not easily nor in a way that makes sense).

What devices are you trying to connect together?

wired routers:
Amazon.com: TRENDnet 4-Port Broadband Router TW100-S4W1CA (Black): Electronics

Amazon.com: Cisco-Linksys EtherFast Cable/DSL Router with 4-Port 10/100 Switch: Electronics

4 more replies
Answer Match 36.96%

Hi, i have a AIO B50-30 and I'm trying to connect via the hdmi input socket my TV satellite box. I have found out recently that there is a switch on the side of the unit that will allow you to switch to the input channels so allowing viewing of the box and other like units Xbox etc. My issue is that I'm pressing the switch but nothing is happening it's simply staying on my desktop on Windows 10. Can anyone please help to see if I'm doing this right or am I missing something ?.  Any help, suggestions would be gratefully received since there is very little on the subject in connection with this particular model .thanks in advance.

More replies
Answer Match 36.96%

hi

im connectiong a switch to a switch, what connection do i use straight or cross.


thanks
 

A:switch to switch straight or cross

standard rj45 cables
 

5 more replies
Answer Match 36.54%

My wife has a two-year-old Samsung notebook. Recently when she unplugged it the machine cut off, even though the battery said 79% charged (it wouldn't charge any further). I figured that the battery was bad so I bought another one from Amazon.

This one charges to 100% percent and does exactly the same thing. I'm perplexed but think there's something going on with the motherboard that won't let it use battery juice, even if Windows 8.1 says it's 100% charged.

I've tried the hold the power button down for 1 min with the battery out trick to no avail.

Any ideas? I'm stumped and think I might need to get her another notebook.

Thanks, Robert
 

A:Samsung Notebook Battery Won't Power Notebook

8 more replies
Answer Match 36.54%

My own notebook (Asus EEE PC S101), running Windows XP service pack 3) was twice redirected to an unknown website when I wanted to visit the Guardian newspaper website. I was using IE version 8. Then the notebook froze. When this happened, I had to switch it off without using Cleanup, which I have used safely for a long time. When I had switched it on again, I used Firefox to go to the Techsupport Forum. I followed the instructions to download dds.scr and began running it. Then the notebook froze again. It still tells me "Two logs shall be created on your desktop" Now the cursor does not move any more either. I write this from another notebook, but I cannot create a logfile,m as everything is frozen on my own notebook. Help, please,

Bienh

A:Malware freezes Notebook (posting from other notebook)

Hi and Welcome!!

My name is Jeff. I would be more than happy to take a look at your malware results logs and help you with solving any malware problems you might have. Logs can take a while to research, so please be patient and know that I am working hard to get you a clean and functional system back in your hands. I'd be grateful if you would note the following:
The fixes are specific to your problem and should only be used for the issues on this machine.
It's often worth reading through these instructions and printing them for ease of reference.
If you don't know or understand something, please don't hesitate to say or ask!! It's better to be sure and safe than sorry.
Please reply to this thread. Do not start a new topic.
If you happen to have a flash drive/thumb drive please have that ready in the event that we need to use it.
Please be sure to subscribe to the topic if you have not already done so.
IMPORTANT NOTE : Please do not delete, download or install anything unless instructed to do so.
DO NOT use any TOOLS such as Combofix or HijackThis fixes without supervision. Doing so could make your system inoperable and could require a full reinstall of your operating system and losing all your programs and data.

Having said that.... Let's get going!!
----------

Are you able to boot to Safe Mode at all? If you are, try to run DDS from there and when the logs are made please post them.

6 more replies
Answer Match 36.54%

New here and so I hope that I am posting in the correct place.
My new notebook an M50-MX5 was in the warranty depot as we thought it had a dvd burning problem, however that was not the case; it was the media.

Anyway before it was sent into the toshiba warranty depot the level 2 tech phone support said to get the computer to be like it was when I unboxed it 2 days earlier, this was last month.
And so to my frustration all of my programs were removed, however before doing this the software techie at the office Ghosted it to my Western Digital Storage Unit and then sent it off to the Warranty Depot.

While it was in the shop I used my 3 yr old toshiba satellite 2410 which I am now typing on at this moment.
I was finally able to get the software tech from the office to reGhost my new toshiba M50 on this past Saturday and left it with him for a couple of hrs and then returned to pick it up as there was not much in the way of programs on it and so it wouldn't take long to Ghost the Images back.

Well, in my Western Digital Storage unit are Ghosts of this 3 year old satellite that I am presently using.
After the techie got my Restore Disk installed and tried to reGhost the image onto the New M50, it crashed.

He was using the wrong Ghost, he was using the one that was from this unit???
I was not happy, especially after he claimed that he now had it Ghosted with the proper Image and I tried it out and it was very sloooooow to Boot. He said it was my Norton 2006.
I... Read more

A:new notebook Ghosted with old notebook ghost and now problems??

Something you might want to try (it's a pita) is a repair of windows - this may fix some of the slowness issues you're seeing. The install program he's talking about is probably the U3 component of many larger USB pen drives. I think it's on most of Sandisk's newer large drives. A repair of windows might also take care of this. I seriously doubt that putting the wrong image on the machine and then putting another image on could do any damage to the machine itself - the folks here at my job do it all the time.
 

3 more replies
Answer Match 36.54%

We've got a desktop hooked into a linksys B router, and a notebook that accesses the internet wirelessly thru that router. lately we havent been able to get a decent connection with the notebook, and if we've gotten any at all, it gets dropped soon. is the desktop getting the majority of the bandwidth, which is eliminating the notebook from getting enough? if so, is there anyway to limit the amount that the desktop is getting?
 

A:Two computers, desktop and notebook, notebook not getting int. connection

What changed from when it was working to now?
 

2 more replies
Answer Match 36.54%

Hello,

I've searched the forum and could not find an answer to this problem.

I have a Windows 7 Enterprise machine where at the login screen the "Switch User" button is missing and so I am unable to clear the last user.

Just about all the results I got back on this topic was how to re-enable the "Switch User". This doesn't help because I can't login to make the change.

TIA!

More replies
Answer Match 36.12%

Hello,

My wallpaper has been changed to some eerie yellow color, and it takes multiple left clicks to click on anything. Right click does not work at all. Also, there were no start menu icons or quick launch icons, until I ran unhide... I'm not sure if I was supposed to do that yet though, since from the looks of the forums we're supposed to do that after removal of the virus. I ran Malwarebytes and it removed 2 things after a full scan, but nothing has changed. Help would be greatly appreciated... thanks!

A:Have to left click multiple times, no right click, no start menu icons

Boot the PC in safemode with networkingPress Windows+R key and typecmd and click okIf your task manager is disabled,copy and run this commandEcho y | reg delete HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System /v DisableTaskMgrPress ENTERIf you're desktop is blank and unable to right click on it ,run this commandEcho y | reg delete HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer /v NoDesktopAfter the command is successfulRestart your PC in safemode with networkingPress WIndows+R key and type%temp% and click okIf you find a folder called SMTMP,Copy the folder to a safe location.Downloadhttp://www.techspot.com/downloads/4716-malwarebytes-anti-malware.htmlInstall,update and run a full scan Click on SHOW results.Select all infections and remove itReboot the PC and scan MBAM once in regular mode until you get a clean logDownloadTDSSkillerLaunch it.Click on change parameters-Select TDLFS file systemClick on "Scan".Please post the LOG report(log file should be in your C drive)

3 more replies
Answer Match 36.12%

Hello, Would someone please be able to help me. I recently got my computer back after being repaired and it was on a small resoultion under the 1000's. I bought a new screen to go with it and just turned it on. I went to display settings and changed resoultion to 1920x1080 and now its just a big blank stretched wallpaper with no icons, task menu/bar or start menu. I also can't click or right click thus I have no way to change this back. I've tried going into normal safe mode and display settings changed it to the smallest, restarted the computer and its doing the exact same thing. I know no fixes and would really appreciate all the help I can get.

A:Changed Resoultion, Icons, Taskbar, Start menu All gone. Can't Click or right click

Follow the below steps:
Press CTRL+Alt+delete together and hit enter
Click on File and New Task (Run)
Type "Control" without any quotes. This will open control panel Window, from where you can easily get to display settings options and change your PC resolution back to it's initial state.

Good Luck.
Regards,
Oliver

1 more replies
Answer Match 36.12%

I'm wondering it it's possible to use the functionalities of tablet PCs (the Tablet PC Input Panel to write and holding a left click to right click) in a non-tablet PC.

I know, it doesn't sound practical, but my Genius tablet doesn't have an option to use the Tablet PC feature, so I want to know if there's a way to "force" Tablet PC (or a third party program that lets me use the "hold the left click to right click" feature of Tablet PC), even if Windows sees my tablet as just a mouse and not a Tablet PC compatible tablet.
 

More replies