Tech Problem Aggregator

hp pavilion touchsmart 23 all in one

Q: hp pavilion touchsmart 23 all in one

ok guys i really need some help/guidance here. There is so much infomation here that im sincerely overwhelmed... I will give you as much information as I have and hope SOMEONE can help! First, I hope i selected the correct board to write this in. As stated, I have a pavilion touchsmart23 all in one pc. I am NOT at ALL computer saavy so work with me here. I dont know if its 32 bit or not nor do I know if it is imperative to my issue. Here is my problem. My computer works fine 70% of the time. Suddenly the screen will go black and give me a disk boot error message. I cant remember word for word but this is what it saYS: "no boot disk has been detected or boot disk has failed". When this happenes, I have to disconnect the computer from the wall and reconnect and start over. This always fixes it so it leads me to believe it is some sort of glitch. I called HP and they told me to run a system quick and extensive check on the hard drive which i have done. Both passed and no errors reported. Another thing that will happen is that the screen will go dark, (typically after idling and when i return and move the mouse or type on keyboard, the screen never lights up again as its supposed to when it is no longer idling. It stays VERY dark and I can barely makeout the screen. I am not sure why this is happening nor do I know what steps to take from here. I am hoping someone can suggest the next step for me or refer me to a thread that already covers this with a solution. My computer is two years old. I didnt expect to have a problem this soon. PLEASE HELP!!!!!!

A: hp pavilion touchsmart 23 all in one

2 more replies
Answer Match 59.22%

So one of the Civilian guys i work with has an HP Pavilion Touchsmart with Windows 8 installed and he overheard me talking to someone about my ability to wipe a computer and clean-install windows 7. He asked if i could do it on his new HP since he basically refuses to use it because of 8 and can't take it back...I've done a lil bit of research about this PC and i guess it wasnt offered in a 7 variant (at least i cant find it) and i read a few articles about downgrading only being possible on Windows 8 *PRO* machines.

I've tried the conventional boot from flash drive with Windows 7 install files, and try to install but it says it cannot do it because the partition style is GPT...and i have no earthly clue what that is...it's new to me. I've wiped and clean installed windows 7 on countless computers now...even one that had windows 8 on it that was an HP...but for some reason this one is extra tricky.

Any body have any Tips or Tricks, links or anything that can help guide in the right direction to getting 8 off this thing and putting 7 on it? It has to be possible...like i said, i've done countless computers now and havent failed yet...but this one has me scratching my head...HARD!!!

EDIT: Wanted to post up the exact product specs for future use

http://h10025.www1.hp.com/ewfrf/wc/d...s&dlc=en&lc=en

A:Downgrading from 8 to 7 on HP Pavilion Touchsmart

Quote:
Windows 8 *PRO*









  
Quote: Originally Posted by MICROSOFT


Can I downgrade the software?
Instead of using the Windows 8 Pro software, you may use one of the following earlier versions: Windows 7 Professional or Windows Vista Business.

This agreement applies to your use of the earlier versions. If the earlier version includes different components, any terms for those components in the agreement that come with the earlier version apply to your use of such components. Neither the manufacturer or installer, nor Microsoft, is obligated to supply earlier versions to you. You must obtain the earlier version separately. At any time, you may replace an earlier version with Windows 8 Pro. To enable downgrade on this computer to Windows 7, you must change the settings to boot into legacy BIOS mode. If the BIOS setting is not changed back to native UEFI mode boot prior to installing Windows 8 Pro, Windows 8 Pro will install; however, the following Windows 8 Pro functionalities will not work as they rely on UEFI mode boot:


OEM manufacturer to supply downgrade rights Vista/Win7 Install DVD's.


As this a OEM manufacturer's PC with Pre-installed Windows 8?

1) Downgrade to Windows 7.
Downgrade Windows 8 to Windows 7
Warning you must have the UEFI/BIOS firmware setting in Step Three set.

Make sure you read the NOTE at Step three.

2) If Using a USB Pen drive on a PC with a UEFI BIOS.
USB Pen dr... Read more

9 more replies
Answer Match 59.22%

I can't login to my laptop. I'm using the password that I thought I changed it to but I guess it's wrong. And now it won't let me login. I just want to login so I can change my password.

More replies
Answer Match 59.22%

HELP my Hp's fan is always running and i don't know if that is normal or the fan is broken. the computer has started to lag when I am trying to play League of Legends. Is this just becuase the computer can't handle the game or is it becuase of the fan. If it is the fan could you give me and estimate of the cost Thanks

More replies
Answer Match 59.22%

Just bought a HP pavilion touchsmart 11.  And now I can't even get into it cause it has a log in password.  Can anyone help me out

More replies
Answer Match 58.38%

HelloI have Pavilion TouchSmart 14-b114ee Sleekbook laptobp and i update the windows for windows 10 but touch screen not working and my laptop say that : no pen or touch input is available for this displayi taked a screenshot for my laptopplaese help me quickly.

More replies
Answer Match 58.38%

My laptop isn't powering up, the charge port light does light up so it's at least receiving some power. When the battery is plugged in, I can insert the power cable and the charging port light is breifly blue/white, but then turns red. Without the battery, it stays blue. With the battery plugged in but charging cable not, pressing the power button causes it to blink 3 times. I've tried a hard reset and I've confirmed it's not a RAM issue, but do not have the tools to do anything else. What should I do next?

More replies
Answer Match 58.38%

I'm pretty sure I'm convinced this is due to a crappy battery that I need to take care of but I've checked my memory and everything seems to be okay but my laptop keeps crashing every once in awhile and my battery won't charge (I've had it for almost three years).  I reboot the computer and everything is fine but it will still crash every couple of days or so.  Unfortunately today, it crashed four times today. Is this a battery problem and if so, where can I get a new laptop battery for cheap?

More replies
Answer Match 58.38%

We need to do student registration on four laptops at locations that do not have power. While the batteries may last long enough, they have also run down a few times in the past, so we need a "Plan B" for power.I thought a simple solution would be to have a UPS/battery backup with an outlet strip that all four could plug into.  If AC is available, fine,  If not, theyd just run off the battery backup. I've d/l'd the user guide and service manuals but can't find the AC current draw info to help me determine what size UPS/battery backup to use. Yes we could plug into a nearby car and inverter but that'd require an inconveniently long extension cable that could be tripped over.  The UPS/battery backup would be more compact and overall a simpler solution. Thanks for any advice!

More replies
Answer Match 58.38%

I bought a SSD for my laptop but my laptop is not recognizing the SSD. The model is the SSD KINGSTON SV300S3N7A / 240G . What should I do?  My notebook is compatible with SSD? 

More replies
Answer Match 57.96%

To try and improve the performance of the laptop, and since a memory upgrade is not an option, I want to replace the 320GB HDD with a 256GB SSD.  I do not have much new software or data on the machine.  Can I use the Recovery Thumb Drive I created to re-install the factory software on the SSD?  It seems to me that it would be the same as replacing the HDD with a new one if it had failed.  If yes, are there any tricks?  I don't think I can use any software to create an image on the SSD as they are different capacities.  Also there is not a CD drive to boot the image creation software from.

A:HP Pavilion TouchSmart 10-e010nr HDD to SSD swap and Windows...

Hi: You may have a problem due to the smaller storage size of the SSD, but you have nothing to lose by trying. Your ssd is big enough to hold what originally came with your PC, but that is not how the recovery disks work. They are built from an image of the smallest hard drive that was offered on that model. That image includes all the empty space unfortunately. So the disk image is normally too big to fit on anything smaller.  

9 more replies
Answer Match 57.96%

Pavilion Touchsmart 23 All-In-One Model f339AMD Radeon HD 8670D My screen is so dim after the computer "wakes up" from sleep mode that I can only read it holding my face an inch away. Restarting brings the brightness back to normal, only to happen again the next time the computer sleeps. This has only started happening since upgrading from Windows 8 to Windows 10.  - All drivers are up to date - All Windows updates are up to date - There is no brightness slider in power options - I have no brightness controls on my keyboard Please help me fix this so I don't have to revert back to Windows 8! Thank you all in advance.











Solved!
View Solution.

A:Pavilion Touchsmart 23 screen dim after sleep since Windows ...

I think I might have made some headway with this problem. I had a friend call me up and he was suffering from these same issues. The partial solution (and probably the major part) that I discovered is that there was a critical BIOS update that had not been done. Because Windows 10 was already installed it didn't show up on the HP Support page or the HP Update software. The way I got around this was to tell the HP support website that i had Windows 8.1. The update then appeared. I downloaded the latest BIOS update for his model and installed it. (BTW: it worked just fine in Windows 10). Once I updated, the dim screen issue was resolved. However, as far as the screensaver, auto sleep, or auto hibernate are still not working. You can manually put the computer to sleep via a button or the start menu and it comes back out just fine. His was an AMD based All-in-one and i don't recall if anyone has had issues with the Intel based platforms. So to recap... If you haven't installed 10 yet make sure you do the BIOS update first. If you have, goto the support website and enter your model. Change the OS to Windows 8.1. Download and install. If anyone has anymore insight, PLEASE reply so others can benefit. Good luck and enjoy Windows 10. And if anyone has a solution for the sleep/hibernate/screensaver issue please respond.

10 more replies
Answer Match 57.96%

How can I screenshot on an HP Pavilion TouchSmart Laptop? I tried "prt sc" and holding "fn" and it did not work. Is it possible to screenshot something on this laptop? If anyone can get back to me with a solution to my problem it would be very appreiciated.   

A:How to Screen Shot with an HP Pavilion TouchSmart Laptop

What about Windows key+PRNT SCR keyWhich OS?

3 more replies
Answer Match 57.96%

The HP Pavilion 21-h010 TouchSmart All-in-One Desktop PC was working fine no problems, and overnight it shut down. Tried powering it up and nothing happened no power on light, fan did not power up.Ordered a new AC Adaptor for it, and still no power to the computer.Opened the computer and looked for any signs of burned componets and there was none. What is you opion as to the problem. Bill.

A:HP Pavilion 21-h010 TouchSmart All-in-One Desktop PC (ENERGY...

@MrBillVTX? Try removing AC adapter and main battery. Then hold down power button for 10-15 seconds. Then attach AC only and try to boot. REO

6 more replies
Answer Match 57.96%

I cannot remember my password to my hp pavilion touchsmart 15 notebook pc. How do i get to unlock or reset. It did not come with any cd's

A:How to reset bios on hp pavilion touchsmart 15 notebook pc

If you are referring to a BIOS power on password-entering the wrong one 3 times should give you a halt code. Post that code here.

5 more replies
Answer Match 57.96%

Each time windows update runs and installs the automatic updates my touchscreen stops responding.

More replies
Answer Match 57.96%

I have "reimage" that keeps on poopping up and telling me that it is from Microsft and that I have to call their phone number to get trojans removed from my computer when they, in fact, are who hacked my computer and put the trojan there in order to get me to buy their product and service. I need to get this removed from my computer but don't have a clue as to how to do this. Please help me!!!

A:How do I remove trojans from my pavilion touchsmart notebo...

Rozarie Hello;Allow me to welcome you to the HP forums!I read your post about your PC being infected and wanted to help.You appear to be the vicitim of some recent variant of something known as "ransomware" -- where your PC gets infected and the culprits demand money to remove the malware.  Despite what the PC is telling you, it was NOT Microsoft! Here is a thread for steps you can take to deal with this:  http://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/I-think-I-have-a-virus-what-can-...Good Luck========================================================================I am a volunteer and I do not work for, nor do I represent, HP.---------------------------------------------------------------If my posts helped you, please click the Thumbs-Up symbol on my post to say thanks.If my posts solved your problem please click "Accept As Solution".========================================================================

1 more replies
Answer Match 57.96%

My touchscreen is not working. I've already tried all the control panel options (went to Tablet PC Settings and tried to configure but it didn't respond, went to pen and touch, same thing), tried to update the Touchscreen Firmware drive and still didn't work. I've even refreshed my laptop but the problem remains the same. Is there any other option that I could try before perform a total System Recovery?

A:Touchscreen is not working on HP Pavilion TouchSmart 14-b169...

Hi  - Have you tried doing the touchscreen test from F2- UEFI Testing for Hardware Failures (Windows 8)  -before that make sure that you updated the HPSA - and then try doing F2 test - hope this would fix the isue Please click "Accept as Solution " if you feel my post solved your issue, it will help others find the solution.Click the "Kudos, Thumbs Up" on the bottom right to say "Thanks" for helping!

3 more replies
Answer Match 57.96%

I'm not able to find the bluetooth setting in my laptop, please help! 

A:Can't find Bluetooth in HP Pavilion TouchSmart Notebook

Hi, Your macine pnly has Realtek RTL8188EE 802.11bg/n 1x1 WiFi adapter, it does NOT have Bluetooth:       http://partsurfer.hp.com/Search.aspx?SearchText=F5W51UA    (Please keep or bookmark above link for future references). Option: you can use an adapter which is similar to      http://www.officeworks.com.au/shop/officeworks/p/targus-bluetooth-4-0-usb-adaptor-taacb75au Regards.  

1 more replies
Answer Match 57.96%

I just need to know how I restore my HP Pavilion TouchSmart 15-b167ca Sleekbook back to factory settings. This laptop/notebook came without cd's











Solved!
View Solution.

A:HP Pavilion TouchSmart 15 Sleekbook how to restore to factor...

cath9999 goes over Windowshttp://windows.microsoft.com/en-us/windows-8/what-happened-to-backup-restore Or F11  and read the Manual Page 61http://h10032.www1.hp.com/ctg/Manual/c03601748.pdf 

9 more replies
Answer Match 57.96%

I have an HP Pavilion Touchsmart 15 laptop. I was wondering what exactly I can upgrade on it for better performance on games. If you're not an expert, don't bother answering. I hate those people who think they know stuff but don't. If you're an expert, thanks in advance. Specs are below: SPECS:model: HP Pavilion Touchsmart 15model number: n091nrOS: Windows 10 Home 64-bitBios: F.15Processor: AMD A4-5000 APU with Radeon HD Graphics Quad Core 1.5 GHzMemory: 4GB RAMGraphics: AMD Radeon HD 8330 (2274MB Memory) Let me know if any other info is needed.

More replies
Answer Match 57.12%

i am having issue with my HP Pavilion TouchSmart 15-n088ca will not boot up getting beeping and flashing caps lock light.caps lock flashes 1wice then pause same for the beeping 2 beeps a total of 10 times. I tried to recover the BIOS but it will not pas the beeping and flashing light. anybody have any sugestion of how to resovel the issue since my PC is out of wrranty. thanks   

More replies
Answer Match 57.12%

I need to connect another monitor to my HP Pavilion 23-Q106a TouchSmart All-in-One to HPw1907 monitor. I have a VGA to HDMI cable and nothing happens when I connect the two. I tried to detect the second monitor, i wasnt able to do so. What should I do? Thanks

A:Connect another monitor toHP Pavilion 23-Q106a TouchSmart Al...

Hey there @ahdr, Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that you are trying to connect another display to your All-in-One computer. I am happy to give you a hand with this. Looking at the HP Pavilion 23-q106a TouchSmart All-in-One Desktop PC Product Specifications, the only available pure graphics port is the one HDMI connection. The other option would be to use a USB to ( DVI/VGA/HDMI) type of adapter which normally includes its own video adapter built in. Looking at the HP Pavilion w1907 Monitor - Product Specifications, you have two connection options for the display itself, either DVI or VGA. You could try a DVI to HDMI connection. Also, you can look at this document: HP Desktop PCs - Connecting Monitors and TVs to Your PC (Windows 10, 8).  Please let me know whether that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

1 more replies
Answer Match 57.12%

PLEASE HELP ME OUT. I've tried ALL the solutions I found online and nothing worked!!OS: Windows 8.1-64 bit1. My HDMI cable is brand new, AND WE tested it at the store, with the store's own TV and laptop.2. Sound Panel -> Playback tab, then right clicked on the two options called "show disabled devices" and"Show Disconnected devices" that appeared, and checked these. Didn't work. It did not show the HDMI devicein Playback.3. Also installed the latest Intel Graphics media accelerator, even ran the Intel Driver update utility soit can detect which drivers need upgrading. Downloaded their latest driver, restarted and still the HDMIdevice doesn't show anywhere, not in sound panel.4. I've also gone to Device Manager -> System Devices -> High Definition Audio Controller to Update Driverbut Windows says its Up to Date because I downloaded the latest Intel Driver for Windows 8.15. I've also gone to services.msc and restarted Windows Audio Service. The HDMI device still does not showin my Sound Card Panel nor the Device Manager...I restarted my laptop while TV is ON and connected tolaptop through HDMI. Still NOT Working. 

More replies
Answer Match 57.12%

The laptop does not boot, but the caps lock button blinks twice when I try to turn it on. I looked it up and found out that it means the BIOS are corrupted. I tried removing the CMOS battery and reinserting it after a few minutes, but it didn't change anything. I tried the instructions on this page: http://support.hp.com/us-en/document/c02693833 but it did not do anything when I tried it from my hard drive. I was going to try it from an external storage device, but this model does not have a BIOS section on the driver and software page. Any help would be greatly appreciated.

More replies
Answer Match 57.12%

Hello, I am having a problem with my touch screen, this happened when i reformatted my notebook, I installed the drivers and a touch panel controller firmware after that my notebooks touch screen wont work i tried to reinstall the firmware but this is what happens  when i press a key to continue this is what appears  After restarting my Notebook and trying to reinstall the firmware this is what appears  do any of you know anything about this? is there a solution to fix this problem?

A:HP Pavilion 10 TouchSmart 10-e008au Touch Screen not Working

Hi @JGPliskin, Thank you for using the HP Forums!  I came across your post about the HP Pavilion 10 TouchSmart 10-e008au Notebook and the TouchScreen not installing correctly. I recommend you Uninstall the Firmware for the TouchScreen and only update from Windows Updates. Here is a link to your drivers page. Please let me know how this goes. If you wish to say Thanks,  click the Thumbs up to give me a Kudos. Thanks.

5 more replies
Answer Match 57.12%

HP Pavilion TouchSmart 15-b153nr Sleekbook battery not charging. I have tried to try resetting the Microsoft ACPI-Compliant Control Method Batterywhich is basically the driver that communicates between the computer and the battery. There is a chance that it is corrupted. I had to reinstall my notebook to original factory setup. Reinstall success but battery still not charging. Please helppp.... Nicklam001

A:HP Pavilion TouchSmart 15-b153nr Sleekbook battery not charg...

How old is the battery? Have you run the battery health gauge program either in the UEFI diagnostics (F2 as you power up) or from HP Support Assistant?

1 more replies
Answer Match 57.12%

Originally, my laptop runs Windows 8 SL. My touchscreen experience satisfies me a lot when I'm using the device far from my table. After upgrading to windows 8.1 SL, I encountered touchscreen difficulties. There are times that I can use the touchscreen interface of my device smoothly but there are also times that I can't interact with my laptop using it's touchscreen. I've tried several troubleshooting like disabling and reenabling the HID-compliant touchscreen driver and also the display adapters of Intel and NVIDIA. I can't interact with my laptop using touchscreen until now. Can you guys help me to get rid of this? thanks in advance.

A:HP Pavilion TouchSmart 14-b132tx Sleekbook touchscreen didn'...

I have the same issues, i also tried everything that i can find for the solution that were on the forums but nothin works, I think this a sotware issue, windows 8.1 has drivers conflict to Hp touchsmart users. And HP must coordinate with windows in regards to this matter. I hope they give us feed back on this matter.

9 more replies
Answer Match 57.12%

I'm having a lot of difficulty searching for Windows 7 64bit drivers for my HP Pavilion TouchSmart 14-b109wm Sleekbook. It's originally a Windows 8 laptop but I installed Windows 7 64bit Pro on a spare HDD and got it to run fine. My only issue now is finding drivers for it. My biggest concern are the video drivers and especially the wireless drivers. Any help would be greatly appreciated.

A:Drivers for Windows 7 on HP Pavilion TouchSmart 14-b109wm Sleekbook

Hi ... Welcome to Seven Forums ... See if the Thread below helps ...
Downgrading from 8 to 7 on HP Pavilion Touchsmart

9 more replies
Answer Match 57.12%

This laptop currently has a Mobile DualCore Intel Core i3-3130M, 2566 MHz processor and I am looking to upgrade it to the Intel Core i7-4702MQ 2.20 GHz processor (Spares# 723522-001). It is listed in the service manual however I am unsure as to if the System Board will support it. The System Board is the original as is the processor and what makes me unsure is that the current processor (i3) is a FCPGA988 socket and the new one (i7) is a FCPGA946. Does anybody know where I can find more information on this? Also, if it requires a MB upgrade, does anybody know which ones will work in this chassis?Any help is appreciated! Thanks! ~DT 

More replies
Answer Match 57.12%

PLEASE HELP ME OUT. I've tried ALL the solutions I found online and nothing worked!!OS: Windows 8.1-64 bit1. My HDMI cable is brand new, AND WE tested it at the store, with the store's own TV and laptop.2. Sound Panel -> Playback tab, then right clicked on the two options called "show disabled devices" and"Show Disconnected devices" that appeared, and checked these. Didn't work. It did not show the HDMI devicein Playback.3. Also installed the latest Intel Graphics media accelerator, even ran the Intel Driver update utility soit can detect which drivers need upgrading. Downloaded their latest driver, restarted and still the HDMIdevice doesn't show anywhere, not in sound panel.4. I've also gone to Device Manager -> System Devices -> High Definition Audio Controller to Update Driverbut Windows says its Up to Date because I downloaded the latest Intel Driver for Windows 8.15. I've also gone to services.msc and restarted Windows Audio Service. The HDMI device still does not showin my Sound Card Panel nor the Device Manager...I restarted my laptop while TV is ON and connected tolaptop through HDMI. Still NOT Working. 

More replies
Answer Match 57.12%

Hello All I need help with new out of the box HP Pavilion TouchSmart 15-109wm. The battery is not charging. Once you unplug the power, it dies. I have follow a couple of fixes, uninstalling the window AC software and reinstalling it, folding a piece of paper and twisting  it in the power connection on the labtop. None worked. I am all the way in Africa and I need these labtops working.Thanks 

More replies
Answer Match 57.12%

It has been a while since my sleekbook stopped working properly. My drivers are updated.. refreshing the laptop didn't do anything either. I have noticed that when pressing f2 on startup, on the components test list, the touchscreen option isn't present. Does anyone have any other suggestions?Thank you

A:HP Pavilion TouchSmart 14-b178sa Sleekbook touchscreen doesn...

Hi @Muffin4 Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts, and other support personnel. I need more informationbut, I will be glad to help you. Please post the full product number and operating system in use on your computer. See the following, if you need help with that information.How Do I Find My Model Number or Product Number?Is the Windows Version on My Computer 32-bit or 64-bit? Can you give more detail of how the computer is not working properly? Are you getting a Blue, Black, or blank screen? Is the any error message?Do you hear the fan and the hard drive?Does the keyboard, mouse and touch screen work?  if not what happens when you try to uses? Please get back to me and I will do all I can to help. 

2 more replies
Answer Match 49.56%

Hai..I have one uint HP Palilion TouchSmart 20 cannot Power ON. The indicator Led light at the Power Socket was light ON but when i press the power botton, the PC cannot boot up (no respond).. Should i submit a report case?? Please Help.. Model: HP Palilion TS 20-F218d AiO PC AllSerial Number: 3CR3290C6XPart Number: H5Y90AA Note: The warranty expierd Oct 2016 

More replies
Answer Match 49.56%

Hello, I am Portuguese and I have a driver problem with my computer.
Computer Information (HP):

Model: Notebook PC HP TouchSmart tm2-2050e
Operating System: Windows 7 64bit (service pack 1)
Version bios: f.25
antivirus: avast free
Maintenance: ccleaner and Advanced SystemCare Pro
Update drivers: ma-config and SlimDrivers









The problem is as follows:

The hard drive was in trouble, so it was replaced.

Then I put the windows 7 again.

And there was no problem, until the driver (s) touch (touchsmart) does not work.







I've done:

I tested it with my finger and pen hit the computer screen.

I went to HP's download page all available drivers for my computer, did not work.

Update drivers with the program ma-config and SlimDrivers not resulted.









Link all the information from my computer:
Configura??o Resumo

Link information about my dxdiag (hosted on google docs / drive):
https://docs.google.com/file/d/0B1iZ...it?usp=sharing


Sorry about the spelling mistakes.

And please, help me.

Thank you.

A:Notebook HP touchsmart tm2-2050ep error driver touchsmart

Hi there .... I understand your touch screen is not working .... Is the touch-pad working though ? Is there any errors in the Device manager ? .... Which Drivers did you download from the HP web site ? .... Did you download Drivers from any where else ? ... Also where you able to get Windows activated ?

9 more replies
Answer Match 36.12%

Dear everybody! I'm going to buy more 8GB Crucial ram for my laptop. Currently i have 4GB. So i will have 12GB ram total. So Could anyone give me some advices about this. Is it ok ? Is it compatible with my device ?  Thank you.  

A:HP-Pavilion-17-f100-Notebook-PC-series - HP Pavilion Noteboo...

@0xaddr? Memory Supports the following configurations: ? 12288 MB (8192 MB×1+ 4096 MB×1; not supported on computer models with a 32-bit operating system) Your manual here. http://h10032.www1.hp.com/ctg/Manual/c04427554 REO

1 more replies
Answer Match 36.12%

The sound on my notebook works fine until I connect it via HDMI to an HP Pavilion 24xw monitor.  Then the audio disappears.  If I disconnect it, the audio comes back. I have tried going to the 'Sound' section of the control panel.  There are two options:Speakers Realtek High Definition Audio HP 24xwThe default is Speakers Realtek.  When I use the test facility my notebook plays the test sound.  I have updated to the latest version of the driver. Can someone help with why when plugging in the monitor the audio disappears from my notebook? Thank you so much!

More replies
Answer Match 35.28%

Hi, I just bought 2 laptops today and wanted it to be in Windows 7 64 bit instead of Windows 10.May I know where to get the Winows 7 drivers?I had tried to search around but I couldn't get Win7 driver.Can you provide me? The laptops I just bought are:HP Pavilion 14-ab175TXHP Pavilion Notebook - 14-ab161tx

More replies
Answer Match 35.28%

I have a Genuine Microsoft DVD for Windows 10. When I put the Bios in UEFI boot mode It does not boot from the DVD or if i use a USB bootable stick formatted using APT format. When I hit esc on boot and select the boot devices to boot from nothing is shown.  If  I let it just try to boot it give me a message that no bootable image on hard disk. It is a new hard.  When I put it in legacy support mode it will boot either the USB or the internal DVD, but I want to use UEFI and the new APT format for security. What device can you buy so this laptop  will boot something that is portable media on this bios ? It came with this format on the original hard drive with windows 7. Thanks,Buford HP Pavilion DV4-5113cl with INSYDE F39 bios from latest update

More replies
Answer Match 35.28%

..........hello,

a simple question......will a HP Pavilion 15-n034sa motherboard fit into a HP Pavilion 15-n083sa ?

help me obi-wan youre my only hope!!

 

A:will a HP Pavilion 15-n034sa motherboard fit into a HP Pavilion 15-n083sa ?

Actually that's a hard question, generally its not possible to install another motherboard, sometimes it is. In this case one is an AMD platform and the other is an Intel platform, there could be tons of differences in mounting holes, physical design, clearance, connectors, heat dissipation requirements, cooling systems, etc. Laptops are not like desktops that use more standardized designs.
 

1 more replies
Answer Match 34.86%

My HP Touchsmart 600 desktop computer has a roughly 5 inch square dead spot on the upper left hand corner of the screen.  Is this a problem that can be easily repaired?  If so, can this be repaired locally? Thank you... Bruce A. Henderson

More replies
Answer Match 34.86%

Hello I have a HP Pavilion TouchSmart Laptop.In the last week the touch screen has stopped working.I was just wondering if anyone was able to help me to get this running again as its really annoying without itThanks in advance

A:touchsmart

Hello @S_tim, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are having an issue with the Touch Screen, and wanted to assist you! To start, can you provide me with the Product Number and Operating System of the notebook?  You can use the links below to help you with that information:HP Customer Support - ProductsWhich Windows operating system am I running? In the meantime, try performing a System Restore to set the notebook back to its previous working state.  If you are still having trouble, then try reviewing the following document, and let me know how it goes: HP Notebook PCs - Touch Screen Issues (Windows 8) Please let me know if this information helps you resolve the issue by marking this post as "Accept as Solution", this will help others easily find the information they may be looking for.  Also, clicking the Thumbs up below is a great way to say thanks! Have a great day!

1 more replies
Answer Match 34.86%

My question: Is the TouchSmart tm2 compatible with WIN 10 and what must be accomplished to achieve a successful install? First, a slignt rant.I was successfuly running WIN 10 on my TouchSmart tm2 when I updated a video driver and afterwards could only get a blank screen. Yes, my bad! I paid HP $99 for incident support and their only suggestion was to do a full system recovery & reinstall WIN 7 Pro. Really? You made me pay for that?  Since I didn't have the OS disks (it was OEM) I had to pay HP $25 for the media and $15 FOR SECOND DAY DELIVERY ONLY TO HAVE THE MEDIA ARRIVE ON DAY 3.  I can't reach anyone at HP to refund the delivery failure. Now support is stating that my computer isn't compatible with WIN 10. If I was successfully running WIN 10, why is it now un compatable?  

A:touchsmart tm2 and win 10

I have just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.

3 more replies
Answer Match 34.86%

I am having trouble with the touch screen aspect of my computer. It works to scroll pages, and click icons, but the multi touch to zoom has stopped working. I have already turned off the touch screen and turned back on, and also have reset my comupter back to default. Help please!
 

More replies
Answer Match 34.86%

Hi, I have a touchsmart tm2, with windows 7 x64 and  i could use a external monitor, with no problems.when i upgrade to windows 10, the external monitor can´t be deteted.i upgrade the amd driver and the intel driver, but it don´t work.Can anyone give a help! Best regards 

More replies
Answer Match 34.86%

Good morning, I wanted to know if there is a varsione updated TouchSmart suite for windows 10.After the upgrade from Windows 7 to Windows 10 icon no longer works.Thank look

A:HP TouchSmart

  HI there is no windows 10 driver for HP Touchsmart 600-1205it 

1 more replies
Answer Match 34.86%

My hp touchsmart 300 1025 is shutting down unexpectadly. I have had it for a little over a year (out of warranty) and it just started to shut down after a few minutes of use. Not sure if it is an overheating problem or a power supply issue? Anybody with same problem? Suggestions welcome!
 

More replies
Answer Match 34.86%

Buongiorno, volevo sapere se c'č una varsione aggiornato TouchSmart suite per windows 10.Dopo l'aggiornamento da Windows 7 a Windows 10 icona non funziona pių.Grazie aspetto

A:HP TouchSmart

  hi this is a English support forum not Italian

1 more replies
Answer Match 34.86%

Hello I have a HP Pavilion TouchSmart Laptop.In the last week the touch screen has stopped working.I was just wondering if anyone was able to help me to get this running again as its really annoying without itThanks in advance

More replies
Answer Match 34.86%

Hello, i have a HP TouchSmart computer that i need to reformat badly. I am wondering if reformatting it with any regular vista CD key will lose such features as the touchscreen, wireless mouse & keyboard, built in webcam.

The Original owner of the computer claims it came with its own Vista CD key that he lost.

A:HP TouchSmart

Hi Jack0000


If the HP restore partition is in good condition (not damaged or malware-ridden), you can perform a re-write of the factory-original hard-disk-image by tapping the F11 as your HP is first powered on, then following the prompts as shown (step-by-step, with screenshots) in the following instructions at the HP support website --- http://h10025.www1.hp.com/ewfrf/wc/d...=3752240#N1066

Note that you'd first want to move any data that you wish to save off to removable or external media before you run a return to factory original.

Once the factory-original image is restored, you'll have to visit Windows Update to get the Security Updates since the TouchSmart was shipped. You'll want to update the Security software as well (if you need a free alternative, I think "avast! antivirus" is a good choice).

Once the PC is updated and fully protected against malware, you can then create a recovery disk set onto DVDs following the instructions from this HP support webpage --- http://h10025.www1.hp.com/ewfrf/wc/d...name=c00882383

Having made your own Recovery DVD set allows you the freedom of running the recovery onto a new, blank drive - should you need or wish to upgrade to a new hard drive in the future.

You can, of course, also order Recovery DVDs directly from HP for most models. The price is considerably less than purchasing a Windows license retail. Much less.

Best of luck
. . . Gary

2 more replies
Answer Match 34.44%

Hi

I have just bought one of these damaged. The screen is smashed, there is no HDD, RAM, Battery and Power Supply. It also has bad damage to one corner (been dropped from a huge height by the looks) thus damaging lid, palm rest and base. I know RAM and P/S are not a great cost issue but I'm not sure if it is worth buying a new screen and hdd for it. I paid ?42.00 for laptop as it was part of a job lot, and I see they retail at around ?500-?600. Should I fix it up to sell or keep, or just sell it as it is to see if I can make a slight profit?

A:Hp touchsmart tm2-1010ea

Forgot, obviously, not been able to check MOBO on it either yet, no spares to check it.

6 more replies
Answer Match 34.44%

Hi all,

Does anyone here experience install Win XP Pro on HP touchsmart tx2(downgrade from Vista)? I need some advise. thank you.

A:Install XP on HP touchsmart tx2

I would advise you not to install XP on a touchsmart PC. The reasons are as follows.

1. Make sure all of the drivers are available on the HP Support website.
2. Since XP tablet edition is not available in retail, the touch screen won't work.
3. You will have ask HP to give you a OEM version of XP tablet edition (which I don't think they will provide).

If you just want to use it as a non-Touch screen PC. Go you may go ahead only after you have confirmed that the drivers are available.

Post back if you have any more questions.

2 more replies
Answer Match 34.44%

Hello everybody. I would like my Hp touchsmart 300 desktop to be upgraded. i only have 2.7GHz as my processor. I would like it to have atleast 3.7 GHz. Do this pc have graphics card? I would like to buy one to place or replace if there is a graphics card. I will also make this pc 8 gb ram. Any  suggestions what parts i will buy 

More replies
Answer Match 34.44%

Hi all,

I have been getting BSOD sporadically on
HP touchsmart 600 all in one pc Home premium Windows 7 64bit.

I updated the driver but nothing happened. also uninstall all unnecessary programs but nothing yet.


Last dump info:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80003090611
BCP3: FFFFF880009A9998
BCP4: FFFFF880009A91F0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\041715-20982-01.dmp
C:\Users\Admin\AppData\Local\Temp\WER-361111-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


Your help is well appreciated.

Thanks

A:HP touchsmart 600 with BSOD

I wanted to add that, this might be happening when updates are getting installed or something like that.

5 more replies
Answer Match 34.44%

I was unplugging my power cords and I happened to turn off the power to my HP Touchsmart. Later on when I turned it back on, my HP Touchsmart won't switch on. The lights on the big batter adapter thing is on. The light at the back of the computer indicating that power is reaching the computer is on. However, I just can't turn it on at all. The power button does not light up.I've tried the solutions posted on other threads but nothing has worked. I had just been using my computer the previous day. I suspect that me turning off the main power might have done something.Look forward to getting some solutions.

More replies
Answer Match 34.44%

My HP touchsmart 520 pc is not booting up and I am looking for support.  Using a multi tester to test the power adapter the adapter reads 17.30v however when i plug the adapter to the computer the light above the power outlet flashes for a split second and disappears. When I unplug the adapter from the back of the computer and checks voltage it reads 0 v (zero volts) . I have to plug it out of the main source and back in so it reads 17.30v again. Once plugged into the computer it immediately drops to zero. I need help to know the source of my problem if it is the adapter or the computer.

More replies
Answer Match 34.44%

Is this pc compatible with win 10?Thansk  

A:HP TouchSmart 600 Windows 10

I have a HP TouchSmart 600 and based on my experience it's not compatible with Windows 10  not even with Windows 8.x and later.

1 more replies
Answer Match 34.44%

I am attempting to repair an HP Touchsmart 300-100.....system fires up....no screen but fans are going like crazy....replaced CPU.....no difference !.....HDD light doesnt light up but you can feel the HDD running if you touch it !.....Motherboard failure ?
 

A:HP Touchsmart 300-1000

Is it actually a 300-1015uk(VG254AA) or a 300-1025uk(VG255AA) HP TouchSmart model?

Screen Is Blank After Starting Computer

----------------------------------------------------------
 

2 more replies
Answer Match 34.44%

Hi, I just recently got an Envy All-in-One Touchsmart; it is a super machine and so far, so good. The 10-point touch is really cool, but there are many instances when I would like to be able to use a pen in order to be more precise in my pointing or to "mark up" a document.  I know Microsoft Office has the "inking" feature because I use it on my Laptop with a "pen" while I am traveling and have found it invaluable -- and, by the way this laptop is both touch and pen enabled. I tried to enable "pen" by going to the Control Panel feature that is says says Pen and Touch, but when you do so, it is only for Touch.  How can I make it so that it both touch and pen enabled?  If that is all possible, what type of "pen" do I need? Thank you very much











Solved!
View Solution.

A:Enabling Pen on TouchSmart

Hi AIResnick, A stylus used on a capacitive touch screen basically just takes the place of your finger, so enabling touch on the computer will enable pen input as well. But it can't just be any pen or stylus, the material at the tip has to be something that will register as touch on the screen, and not scratch it. I read your other post and I understand you're looking for a finer-tipped stylus, rather than the ubiquitous blunt-ended, eraser-type stylus pens. That limits your options quite a bit, because I believe the larger surface area is part of what makes those pens work on capacitive screens. (Other types of touch screens can use other styles of stylus, including pointy-tipped ones in some cases.) I've heard good things about the Jot Pro from Adonit. I haven't tried it, so I can't speak from experience. The design seems clever--it looks like they attached a clear, flat disc to the tip of a metal pen, so you can see precisely where you're writing with the point of the pen, but the clear disc provides enough surface area for the touch to register, and prevents damage to your screen from the sharp pen point. I hope that helps.

4 more replies
Answer Match 34.44%

Hello

My HP Touchsmart has never worked properly, Tons of problem, crashing error message etc etc. Computer was sent to HP for repair but it came back whit the same problem. I have spent hours with HP tech support running scan and making recovery with no succes. Recently I have replaced the hard drive on HP tech support recommendation. it worked for awhile but now it dosen't even boot! I don't want to call HP anymore and I wander if somebody can help me or if I should just give up.

Thanks
 

A:Trouble with HP Touchsmart

Call HP and ask to talk to a manager, then explain what's happened and the number of times you called and that you've had to send it back and demand that they replace the computer with a new one. All-in-Ones are similar to laptops, the repairs are expensive and parts are hard to get, it's best to get the manufacturer to repair or replace it especially under the warranty.
 

3 more replies
Answer Match 34.44%

I bought a8GB [2x4GB] DDR3-1333 RAM Memory Upgrade Kit forto upgrade my HP Touchsmart 600-1050 All in one. However, it hadn't worked and showed only black screen after installed.The discription is4GB DDR3-1333 PC3-10600 Non-ECC Unbuffered 204 Pin 1.5V CL=9 Memory After then, I bought a different one of8GB Kit (4GBx2) DDR3 1600 MT/s (PC3 - 12800) CL11 SODIMM Notebook Memory Modules CT2KIT51264BF160B / CT2CP51264BF160B at amaozn.com It has the same problem.Are those not compitable with my computer? If so, please let me know a compitable memory set for upgrade.   

More replies
Answer Match 34.44%

Hello!  I have a TouchSmart 600--an all-in-one with several inputs except one for a second monitor. (On Windows 7). I purchased a VGA - HDMI (AV?) adapter hoping it might work.It did not.Asking for help, or a direction, please. I've searched through several different forum threads similar to mine, but the responses were several years old with no resolution besides perhaps I should have gotten a USB adapter. I've yet to find someone who successfully paired a second monitor. I did get to Display - clicked detect. Nothing was detected. Second monitor (19inch Acer) says no signal. Appreciative of any advice    

More replies
Answer Match 34.44%

I have been dealing with a broken home on my laptop for more than a year. I just searched these forums and found ~70 posts all with the same issue. This seems to be due to poor design that never should have made it past the quality assurance engineers, having a metal hinge screwed into non-reinforced plastic. I find it reprehensible that a premium laptop was made so poorly. I am told by local PC repair shops that it will cost me $400+ to get this fixed. That's 1/3 what I paid for the machine in the first place.I tried calling support and was directed to log onto the support site for assistance, from which I was directed to search the forums. I thought HP made better products than this, but hadn't wanted to put up the money to get one to find out. Then I bit the bullet and got rewarded with a busted hinge on a laptop that spends its days being used by my wife at home, bring opened and closed 2-3 times per day. And now it seems like I'm going to get the runaround to get this fixed, or just have to trash an otherwise great machine due to crappy hinges. I love this laptop as far as performance and hardware specs go but it is a pain to open and close to try and avoid breaking the other hinge and essentially removing the screen.Any guidance on what I can do to get an actual answer or a case submitted to get any useful help?

More replies
Answer Match 34.44%

I have turned on the pc and found out that there is "cpu fan not detected" f1 - boot.I was advised bybthe owner to use vaccuum cleaner to clean the fan at the bottom. It works pne time but after a while comes the same problem again. How can i solve it without opening the product?

More replies
Answer Match 34.44%

I have turned on the pc and found out that there is "cpu fan not detected" f1 - boot.I was advised bybthe owner to use vaccuum cleaner to clean the fan at the bottom. It works pne time but after a while comes the same problem again. How can i solve it without opening the product?

More replies
Answer Match 34.44%

Hi, The LCD on my Touchsmart 11 has failed. It was flickering vertical lines for a while and has now died completely. The HDMI output still works. The laptop is out of warranty. How can I send this back to HP for repair and any idea of cost? Thanks, David

More replies
Answer Match 34.44%

I upgraded from windows8 to windows10 and now all of my touchsmart software for tm2-2150 is gone.  Where do I go to download? 

A:hp touchsmart software is gone for my tm2-215

Hi, Only available for Windows 7. Please check to see they work or not:     http://support.hp.com/us-en/drivers/selfservice/HP-TouchSmart-tm2-Notebook-PC-series/4247583/model/4... Regards.

1 more replies
Answer Match 34.44%

So I have a question...I am wanting to upgrade my 4GB of RAM to 8GB of RAM. I know type I need but I don't know if I need to buy another 4GB Module or if I need to buy the 8GB kit...Do the RAM Module need to be the same brand or can they be different brands and work.
 

A:Hp TouchSmart 320 Ram Upgrade

8 more replies
Answer Match 34.44%

Hi, I need to purchase a new motherboard for my TouchSmart 610.  I've opened up the computer and found that the motherboard installed in the computer is model number DA0ZN8MB6I0 (Part number 648511-001).  While trying to find a place to purchase this mother board, I see that is motherboard is fairly expensive.  While searhing I also found another motherboard, model number DA0ZN9MB6H0 (Part number 648512-001), which is also used in the TouchSmart 610.  Visually this motherboard looks the same at the orignal motherboard and is significanly cheaper.  The part numbers differ by only one digit (before the revisoin number, 001), which makes me think that the two motherboards are very similar. Does anyone know if these two motehrboard are compatiable/interchangeable?  Where can I get information on the difference between these two motherboards? My motherboard has a built in video cards, does anyone know if the second motehrboard does as well?  or will I need to purchase a seperate video card if I were to purchase that motherbaord? Thanks for the help.

More replies
Answer Match 34.44%

Can I install XP on this workstation? It's now runnig on Vista.
I think that will get a problem with the drivers.....

More replies
Answer Match 34.44%

My hard drive is going bad (does not recognize hard drive on startup, did have a periodic clicking noise recently but that has gone away). 1.  Is there a way to confirm if its the hard drive or controller2.  Will the recovery USB load the OS?  If so which one.  I upgraded to Windows 10. Thanks for your help.

More replies
Answer Match 34.44%

I have an hp touchsmart iq 506 and I wanna do a dual boot by adding xp to it. but I need some explanation please if you can help me

More replies
Answer Match 34.44%

New Computer, that I need to send in, but for piece of mind, I would like to know what's going on. They will repair back to original state, but I will have to reload all programs. Want to make sure that it is not a conflict. Windows 7 64 bit Ultimate.
Thanks in advance for all the help.

A:BSOD - HP TouchSmart 600

SNAFU, welcome to the forum. That is quite few dumps! I looked at your four most recent dumps. All have the same error code and are nearly identical.

I recommend that you uninstall Zone Alarm using this uninstall tool: http://download.zonealarm.com/bin/fr...cpes_clean.exe. ZA is a documented and well known cause of BSOD's on some Win 7 systems. Make sure Windows Firewall is turned on.






Quote:
Error code 7F, UNEXPECTED_KERNEL_MODE_TRAP.







Quote:
Usual causes: Memory corruption, Hardware (memory in particular), Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack



Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c1c000 PsLoadedModuleList = 0xfffff800`02e59e50
Debug session time: Thu Nov 4 16:19:58.484 2010 (GMT-5)
System Uptime: 0 days 21:58:02.827
Loading Kernel Symbols
...............................................................
................................................................
.............................................
Loading User Symbols
Loading unloaded module list
....
************************... Read more

3 more replies
Answer Match 34.44%

Hello, so I have a hp touchsmart 600-1350a although theres no av cable or hdmi port i checked on the web and it said thathp touchsmart has a hdmi port, also I dont have any ambient light too?

A:PS4 to a HP Touchsmart 600 - 1350a

Hi @markdag, Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel.I understand that you are looking for information on connecting your Touchsmart  All-in-One to a PS4. I am happy to give you a hand with this. The available connections on Touchsmart and All-in-Ones in general vary from model to model. Some have an HDMI port that can be used as an input, and others do not. Looking at the specifications of the model you gave: HP TouchSmart 600-1350a Desktop PC Product Specifications, it shows in one diagram that it could potentially have video inputs, but it is an option. If your system does not have those, then you would not be able to use the display on the All-in-One with your PS4.   I hope that helps clarify, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.   

1 more replies
Answer Match 34.44%

Hi
My mother bought one of these and the keyboard broke. So I'm using the touch pad.
Problem is the more peculiar buttons like Prnt Screen and Delete went missing.
They went missing for some unknown reason as I was typing.

Does anyone have any experience with this trainwreck of a computer?
 

More replies
Answer Match 34.44%

I am new to the forum but a long time computer tech. I have been to the forum on various occasions for help on fixing different issues. I have to say this is a great community that helps alot of people including myself. I've ran into an issue that I believe is needing some of you guys expertise.
What I have is a touchsmart laptop from HP that the keyboard and the touchpad mouse quit working. I have searched all over the internet looking for answers and came across a few telling me to pull the battery and AC adapter to reset the computer. I've had no luck on this being a solution. I have read that booting the computer with the touchscreen facing out is what causes this issue.

So I've tried pulling the power and the battery then holding the power button in to drain any residual energy left on the CPU. And upon booting the computer keyboard will respond but only for the menu that states for starting Windows normally or in Safe mode. After letting the computer boot completely the keyboard and touchpad quits working altogether. This is booting it up in safe mode or in normal mode. The laptop is running Windows 7 Home Premium and I believe that this is my only issue. Any help or ideas on what else to troubleshoot will be greatly appreciated. Thanks in advance.
 

A:HP Touchsmart tx2-1377nr

bump
 

1 more replies
Answer Match 34.44%

My HP TouchSmart 610 All-in-one had a component failure and had to have a reinstall.How do I reinstall the TouchSmart software for webcam, video, photos, etc?

More replies
Answer Match 34.44%

In my quest to clean out a bunch of unused programs, I found that I have HP TouchSmart Recipe Box.

After researching about this, I decided it just might be something my wife could use; however, everything I have read about it says it is for HP TouchSmart computers.

My desk-top is HP but I don't think it is a TouchSmart.

My question is, must we have a TouchSmart computer to utilize the HP TouchSmart Recipe Box ?

Thanks.
 

A:HP TouchSmart Recipe Box ???

Try these Google searches:

HP Magic Canvas
HP TouchSmart Recipe Box

What exact model of HP do you have? I find it difficult to believe it isn't a touchsmart if it came with the software. It looks like the apps can be used with a keyboard in many cases, though. See review video in your other thread.
 

1 more replies
Answer Match 34.44%

Good Evening, I have a HP Touchsmart TM2-I can supply the specs if you need them- and it has just started to crash at almost every click/action which I take. THis has only happened within the last couple of days and it has been instant, rather than over time. I did a System Restore but this didn't solve the issue. It may ahve been because I had to stop a disk check last week because my laptop battery died but I'm not sure if that would have such a big effect on the laptops performance.

Any help is greatly appreciated!

Thanks a lot
Dan

A:Hp Touchsmart TM2 crashing

That would have a huge effect not finishing a disk check. If you can boot in, Make sure you have your power adapter attached, Go to Start/Search and type CMD Right click the CMD.exe icon in the Search Results and Run As Administrator. In the Command Prompt type chkdsk /R and press enter. Now type a Y and reboot the computer. The Check Disk Utility will try and fix any problems.

3 more replies
Answer Match 34.44%

Have trouble for weeks.

Details:

? OS - Windows 7 Ultimate x64
? What was original installed OS on system? = Vista
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? HP oem
? Age of system (hardware) 2009
? Age of OS installation - have you re-installed the OS? december 2011

? CPU = Mobile DualCore Intel Core 2 Duo T9900, 3066 MHz (11.5 x 267)
? Video Card = NVIDIA GeForce 9600M GS (512 MB)
? MotherBoard = Asus IMIMV-CF (Maureen) (2 Mini-PCIE, 2 SO-DIMM, Audio, Video, Gigabit LAN, IEEE-1394)
? Power Supply - brand & wattage = unknown

? System Manufacturer = HP
? Exact model number (if laptop, check label on bottom) = TouchSmart IQ830NL

A:HP TouchSmart BSOD

Hi -

I received your PM re: no dump files.

When are the BSODs occurring? (immediately after boot-up or ... minutes, hours later?)

Please see - NO KERNEL MEMORY DUMP FILES BEING PRODUCED UPON BSOD?

Can you read info from the blue screen? I'm looking for the STOP error and a driver name.

Regards. . .

jcgriff2

`

11 more replies
Answer Match 34.44%

I have a currently crippled HP touchsmart 300-1003. I replaced a dead hard drive with a new 1TB HDD. I have available to me 2 sets of touchsmart recovery disks, and Windows 7 Bootable USB drive (made with win7 tool). The official recovery CDs do absolutely nothing but tell me MBR IS MISSING PRESS CTRL ALT DEL TO RESTART. The bios lists my new HDD (can tell because size is now 1000GB). I cannot choose USB drive as first boot in bios or boot order (this pc has two different menus for the same function, idky). Is there a bootdisk I can use to fixmbr? Please be so kind to provide a guide to getting a touch computer running from the begininng. All the advice online seems to be for computers that will go to a recovery screen already. If I could do that I wouldn't need the disks, lol. I would like to install the touchsmart software but will settle for any windows at this point. Thanks in advance to anyone that is able to walk me through the process.1 Hour Later: To use MSWIN7 USB Tool, I had to ENABLE BOOT DIAGNOSTIC from BIOS, power on, let the black screen read Configured 01 usb drive, ctrlaltdel, f10 to bios again, disable boot diagnostic screen, save and continue f5, then hit ESC for tiny boot menu at the HP LOGO, pick USB 2.0 as first boot. The tool started windows as Repair (which I followed MSguide for bootsec and /fixmbr, no clue if that fixed mbr tho) and Install Windows 7. I picked install. More updates to come.

A:HP Touchsmart 300-1003

hi i would download a hdd utility from the maker of the harddrive ,burn it to cd ,usually instruction on ther sitr on how to do this ,to setup harddrive for first time use,it may just need to be formatted to create that mbr that seems to be missing .
burn it to cd ,usually instruction on ther sitr on how to do this ,,
a list of links to most makers can be found on bleepingcomputers i thought but i couldn't fine i ,i will post this site with links to most makers .good luck
http://www.tacktech.com/display.cfm?ttid=287

5 more replies
Answer Match 34.44%

I've got a TouchSmart 610-1280qd desktop. It was working fine until 1 week ago when my home had a power outage. Now, it won't even boot up. No power, nothing. Even the power brick light is out. I bought a replacement power brick and when I plug it in, the green led light on the new brick(the old is blue) immediately goes out and there's still no power. The power button effects no response, nor does any button on the keyboard have any effect. There's just no power to the entire computer. I've tried plugging both the old and new power bricks in and initially, the blue and green lights on each respectively go on, until I plug them into the desktop.  Then the lights go out and still no power and no response by pressing the power button or any button on the keyboard. I've also tried plugging in the old and new power bricks without the surge protector. The power bricks lights go on, but as soon as I plug them in, still no power. I've tried different outlets around my house and the power bricks lights go on, but as soon as I plug them into the desktop, no power. I've tried plugging he power bricks into the desktop first, then the outlets, and no power at all either in the desktop. There is no response at any stage where i've pressed the keyboards buttons. The desktop just doesn't have any power at all.   Anyone have a problem with this? I really hope it isn't what I think it is and the motherboard is out.      &nb... Read more

A:Touchsmart 610 no power

Hi there @MrJimCee1, Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that your computer is not starting properly and does not appear to be getting power. I am happy to help with this.  I recommend that you look at this document: HP PCs - Computer Does Not Start (Windows 7). For your purposes you are probably going to have to do Step 1 and then in Step 2, the first section "The computer does not turn on".  If after finishing Step 2 there is a change, and the computer is getting power let me know if there is still an issue I can help  you with, if it still does not receive power, then you should contact phone support. Please use the following http://www.hp.com/contacthp and create a case for your issue and contact HP. If you live outside the US/Canada, please click the link below to get the contact information for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Let me know how that works for you, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.  

1 more replies
Answer Match 34.44%

I have a HP TouchSmart Computer. Since downloading updates from HP and Microsoft - my computer does not want to work - My Computer uses Vista.

It starts off fine, however as soon as I open a programme, task manager, anything - it stops says its 'not responding'. The only way out is to hold the power button in for approx. 5 secs.

I am not to up on computers, I have tried lots of things, i have had a couple of codes 0x490 and 0xc000000f - but I am not lost - I am using my old computer to put this message on here - whilst my HP TouchSmart sulks.

Any Help Please ~ Thank You in advance ~ Gail
 

More replies
Answer Match 34.44%

Upgraded to windows 10 and now unable to use convenient features I've had for years.  My touchpad is disabled, so can't just tap the pad to select what I want; my DigitalPersona fingerprint is disabled and in trying to enable it again, it appears to want to trick me to permanently delete my saved fingerprint.  How can I get these features back.  Thanks.

More replies
Answer Match 34.44%

I'm wanting to add a second screen to my Touchsmart 520 for work but i'm not sure if i can do this or how to do this.. please help.

A:Can i add a second screen to my HP Touchsmart 520

Depending on what the device is expected to do, something along this line might be what you desire.http://www.amazon.com/Plugable-Graphics-Multiple-Monitors-1920x1080/dp/B004AIJE9G/ref=sr_1_12?s=elec...

1 more replies
Answer Match 34.44%

I have an HP Envy20 AiO touchsmart pc and just installed win 10 and it has been working fine and I restarted it today and the power button lights and the fan goes but the screen remains black. I can use my mouse but not my keyboard and every few minutes it sleeps numerous times for seconds then comes back yet the screen stays dark.

More replies
Answer Match 34.44%

Hello I have a touchsmart 300 and it has no sound from the speakers or headphone jack. I have tried the troubleshoot thing and it dont recognize anything wrong with them. please help. ive tried updating the driver and it says it is updated. so lost. thanks.
 

A:Touchsmart 300 no sound

Did your pc have working sound when new?
Check the volume level, it's easy to turn it right down or mute it.
Check if the speakers are selected by going to the speaker icon in tray near the current time.
Right click on speaker icon, choose 'playback devices'.
A new box appears, with a speaker and it should have a green tick over it.
Right click on the icon and choose the option 'test', you should hear audio tones.
If you don't have a green tick, right click on icon and choose 'enable'.
 

1 more replies
Answer Match 34.44%

moved house recently, hooked the computer back up in the new office and the wireless keyboard worked for about 2 minutes. I changed the batteries but to no avail. Went and bought brand new batteries and again no go but the wireless mouse is still working fine. I have tried the blue connect button on the back of the keyboard but still nothing. Any ideas or suggestions

A:HP touchsmart 520 keyboard

To help you troubleshoot the issue with wireless Keyboard, please find the link given below and follow the step-by-step instructions mentioned on it:http://support.hp.com/in-en/document/c00006821#AbT1 Hope this will help you.

1 more replies
Answer Match 34.44%

I am experiencing with a laptop of series hp touchsmart tx2 !

The problem is that the whole view that i get on the screen is not getting loaded only half the screen is shown . I dont know what might be the error behind this ? And in case u think this might be due to i dropped my laptop or something it is definitely not . I have not dropped my laptop .

Can some please suggest to me what might be the problem ?
 

More replies
Answer Match 34.44%

Hello, Our TouchSmart PC will no longer turn on. It was working yesterday but today will not turn on. The LED on the back of the computer where the power supply meets the PC is off. When you press the power button the LED light flickers green one time but remains off. The computer does not power up at all. I have tested the power supply with a laptop and it is working. I have also tried another identical powersupply on the PC but the same thing occurs. Thanks  

A:HP TouchSmart 520 All-In-One Won't Turn On

Hello @cb086, I have reviewed your post and as the adapter works on another device I believe you problem is on the motherboard. The issue appears to be a physical issue. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.I would like to thank you for posting on the HP Forums. Have a great day!

2 more replies
Answer Match 34.44%

Windows media center live tv works. Touchsmart live tv product of Cyberlink, comes up with a blank black screen. Seems there should be some way to e.g. sync these two programs to Touchsmart works. Any ideas are appreciated.

More replies