Tech Problem Aggregator

how to clear power-on password of HP 110 desktop PC series

Q: how to clear power-on password of HP 110 desktop PC series

How to clear power-on password of HP desktop 110-a04 series pc?

A: how to clear power-on password of HP 110 desktop PC series

Hi, Please try 3 times then post back error code Regards.

1 more replies
Answer Match 71.82%

A not-for-profit institution had a system stolen and the perpetrator set an administrator password on the bios before we recovered it. I am getting a System Disable [ 62711391 ] error message. Can I get an unlock code to for the system? Thanks.

A:Clear Administrator / Power On Password

@skilesa? Enter    73679917 Regards, DP-K

2 more replies
Answer Match 60.06%

At my school we have a decent supply of laptops and when one of them breaks we are either told to wait briefly for it to be repaired or if it is more serious we are given a new one and our data is transferred over our server.

I recently was given the computer of a student who was expelled from my school and the ?TrueSuite? program is holding fast to his fingerprints and I can?t find any way to get rid of them.

I don't care about any stored passwords.
I just want to be able to clear it and add my own so I can use the features of that program.

Is there any way to fix this situation other than going to the kids house and getting his finger prints?

A:How do I clear the fingerprints on Portege series

Hi

I doubt you can delete this fingerprint without to be locked in the Windows system.
You can either use the fingerprint or the password to log in to the system.

If you don?t have one of these possibilities then you will be not able to log in.

2 more replies
Answer Match 56.28%

I entered bios with my password and did that "clear password", after i reboot system "enter current password" screen appared and not accepting any of my passwords (i tried old passwords, tried with different keyboards). Any help would be appreciated.

More replies
Answer Match 55.86%

So Dell made a really terrible decision.  They have a transparent strip in the power button for an LED light to indicate if the power is on.  A power indicator is a given in any laptop, no matter how cheap it is.  However, Dell in all of it's genius decided to not include an LED bulb on laptops up to the Inspiron 7000 Series, despite leaving a transparent slot for it.  Seriously, what happened to this brand?!?  Do children make these laptops now?
I want to fix this, as my laptop is no longer returnable and a power indicator is absolutely necessary.  So the only thing I can think of is replacing it with one from the 7000 Series somehow (with some help probably).
This is a Dell Inspiron 5559.  I also have an Inspiron 5547.  Not sure which exact 7000 model I should get the part for...
Are they compatible?
Is there an easier way? Like how Fn+H turns on the hard drive indicator?
Thanks.

A:Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board?

The systems use different case and mainboard designs -- and may even be made by different companies.  The answer in all likelihood is no.
I don't think Apple has produced a Macbook with a power indicator -- the PC vendors are playing follow Apple.

1 more replies
Answer Match 52.92%

i had clear my laptop bios password after this i cant logen anymore
laptop hp omnibook ex3
plz help me
 

A:Clear password

Ophcrack (ISO download) bootable CD (once burnt to CD)
Will locate Windows user(administrator) passwords
http://sourceforge.net/project/showfiles.php?group_id=133599&package_id=167699
 

4 more replies
Answer Match 52.5%

eMachines T3256 Home Desktop Computer Running Windows XP

Can you tell me how to clear my log on password? I can't remember my resent password. Please help

Thank You,

tdj9342
 

A:How to clear my admin password

Unfortunately our rules prohibit us from assisting with password matters as we have no way of verifying if you are the true owner of the computer: http://www.techguy.org/rules.html

Passwords - Please do not ask for assistance with forgotten passwords and/or bypassing them. As there is no way to verify the actual situation and/or intentions, no assistance will be provided and any such threads will be closed.
Click to expand...
 

1 more replies
Answer Match 52.5%

I just replaced my BIOS battery and now with all the settings erased, I'm trying to go into the BIOS and fix them, but it's asking me for a password and won't let me get in without it. What the heck? Isn't removing and replacing the battery supposed to get rid of all settings, including the BIOS password? I didn't have a password on my BIOS before I replaced the battery, and now I have no idea what this one is or how to get around it. And I can't take the battery out to make it forget, because taking the battery out was what started this mess to begin with. Anyone know how to get in?
 

A:How do I clear a BIOS password?

6 more replies
Answer Match 52.5%

I was just given a used Dell Optiplex 780 Mini Tower computer. It has Windows XP Pro.

The problem is that it just boots up to the Windows Log In window, prompting me for the password. The old Username is already displayed there. The computer was from a batch of computers that were replaced at where one of my sisters works. So, I asked my sister if she could find out what the password was. She got with the girl who used to use that computer and gave me the supposed password. I tried that password, but still no dice.

So, is there a way I can clear the Windows Log In password? Preferably I'd like to in the process more like reset the entire settings so that the computer now just simply boots up to the Desktop sans any Windows Log In password prompt like my current computer.
 

A:How To Clear Windows Log In Password

Have you tried safe mode?
 

37 more replies
Answer Match 52.5%

I had a HP laptop Folio 1040 G1. Few years ago, I'd set the bios password on it. (I've still remember, and use the PW everyday) But now, I haven't need to protect it by bios password anymore.I tried clear it, but I found that - just only change it. Normanly, when to clear bios password (ex. on desktop) the PC checks current PW  (I passed the stage).On the box to ask new password, put the ESC button. And then the PW has been removed. But on Folio 1040 G1, that way didn't work. Pleas tell I can remove it or not (and how to do). Thanks you all !

More replies
Answer Match 51.66%

how do you clear the bios password on hp envy 700-230? The user set it and cannot remember it I have tried removing the battery from the mother board for 30 minutes but that did not clear the password.

A:how to clear bios password on hp envy 700-230

I was able to find an image which shows where the clr cmos\password jumpers are, but I do not know where the jumpers should be moved.  Take a closeup digital photograph of the section above the SATA portys and post it here please. 

5 more replies
Answer Match 51.66%

I think I have the problem that NT is sending an encrypted password to my Unix machine. The network is peer to peer running TCPIP. My 95/98 PC's are fine. I found a patch to edit the register for Win98 to enable clear text but NT seems to be different. Any suggestions?
 

A:{Resolved} - Clear Text Password

Greetings

How are you accessing your Uinx box over the net? Via telnet? If so, then this does use clear text, and all the articles I have found are how to install services to not send Clear Text over the network.

Have you installed the NT services for UNIX?

If not, then you can read about it here: http://www.microsoft.com/TechNet/winnt/sfuwp.asp
Hope this helps

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Every morning is the dawn of a new error...

[This message has been edited by Reuel Miller (edited 02-08-2000).]
 

2 more replies
Answer Match 51.66%

I have a compaq cq 42 laptop that has a bios password that I do not know.  My disable code is 54352736. Can someone help me to access the bios and resolve my issue? 

A:Clear Bios Password CQ42

@Falcon_India? Enter   41030318

1 more replies
Answer Match 51.66%

i have amd processor from my friend advise i have set supervisor password but i have forgot it please help me to remove

A:help me to clear bios password my pc locked

help me to clear pc bios password i have forgot it

3 more replies
Answer Match 51.66%

I purchased a used HP ProBook 6440b that had a password set for access the bios or cmos.  I would like to clear or reset this password.  I installed .NET Framework and then some of the HP ProtectTools and all that accomplished to change the password for the Owner/User access not the Admin password to setup and it seems to  have set a password for starting up Windows 7 64 bit Professional even after a reinstall of the OS.  There are no error messages - after attempting to enter 3 times, i think, a messages says to hit the power button.

More replies
Answer Match 51.66%

Need a bios password for a Compaq CQ62 System Disabled KEY: 5503579  Compaq Presario CQ62-209WM

A:Clear bios password (Compaq CQ-62 )

@curtism49 Check the code you've posted - it should contain 8 digits. Regards, DP-K

1 more replies
Answer Match 51.66%

I want to remove the *well-known* HDD password at my Toshiba Portege M400.
I did not find any option at BIOS or installed software from Toshiba support.
I strongly need your help.

BIOS= 3.80
OS - Windows 7 Enterprise 32 bit Ru

A:Clear HDD password at Portege M400

Hi,

please, read here:

http://aps2.toshiba-tro.de/kb0/FAQ9202JG0000R01.htm

As I know, in Bios hdd protection password option should exist

Message was edited by: Jeka-IL

4 more replies
Answer Match 51.24%

Hi all,
I'm having a bit of difficulty with something. I have two accounts on my computer, a Admin and a local user account under my name. I have forgotten the password that I put on the admin account and now I need to download Microsoft Office and it is not allowing me to do so because it requires that I have administrator privileges.

So I need to clear out the password, or make my standard user account an administrator account.

Can someone help me? Thanks!

A:Recover/Clear Windows 7 Admin Password

Welcome to SF!

While password hacking techniques will not be discussed here, there are other things to try.

Reboot the computer into safe mode, and log into the built-in administrator account. Then change the password for your admin account.

3 more replies
Answer Match 51.24%

I am currently trying to load a Linux operating system as a clean install on a Dell Optiplex GX520, but can't seem to manage it because I can't reconfigure the boot order to accommodate the external CD drive attached (it doesn't have one on board). We bought a couple of these units at a business liquidation to use with our kids, and while I've been able to set up one of them without a hitch, I can't access the other one because the BIOS is password protected - and I obviously don't have a hope in hell of finding out what it is.

I was directed to the following site -http://support.dell.com/support/edoc...g/advfeat0.htm - where a solution was suggested, but try as I might I cannot find the appropriate pin that clears the password - the diagram is a little on the obscure side. I can't see a pin of any kind ANYWHERE on the board in fact.

Can anyone familiar with the board tell me how to solve the problem?

Thanks in advance...............Tim

A:Can't clear the BIOS password to do a fresh install

TSF cannot help you bypass protection, sorry to say.

2 more replies
Answer Match 51.24%

How do I create a password so you would need a password to clear private data in firefox?

A:How do create a password for clear private data

Hi, welcome to TSF

The 'clear private data' feature is not password protected. You might be able to do it through the about:config settings or there might be an addon available, but I can't find anything.

Is your Firefox profile password-protected, and have you set a master password in Tools > Options > Security tab? If other people are using the computer, do they all have their own Firefox profiles?

You could install the Menu Editor addon which allows you to remove menu entries. This would remove 'Clear Private Data' from the Tools menu, but would not disable the keyboard shortcut, Ctrl-Shift-Del.

6 more replies
Answer Match 51.24%

Hey guys,

My name is Ryan I am the Admin at a company with a small (40 terminal) network. Currently the network is on a workgroup running windows XP Pro on all machines. We have a NAS (N4100+ Thecus) on the network with protected folders (the authetication is done by the NAS, as that is where the users and protected folders are created and managed). The NAS shows up as NT 4.9 Server and all the folders that aren't password protected are readily accessible. The first time I attempt to login to a protected folder (having not logged in to ANY protected folders at all on the network) the login works fine. But if I go to a different protected folder under a different user I am prompted for the login credentials (which i type in correctly) but it then tells me I do not have permission to view this folder. When I type in the first protected folder path it doesn't ask me for login credetials and just lets me in. I am wondering where in XP does it store the login and password info for internal network IP's login so I can delete any saved credentials.

Thanks

Ryan

(I posted this under networking but no one will respond *pictures everyone giving him funny looks* Maybe this is where i should have posted this?)
 

A:Solved: How to clear network password credentials

tools - disconnect mapped drive

*blush* brain fart
 

1 more replies
Answer Match 50.82%

HiIs there a way to clear/reset bios admin password in HP Elite 2530p?I tried to remove cmos battery, and then unplug the laptop battery, but the admin password is still there Thanks

A:How to clear BIOS admin password HP Elite 2530p?

short the two metal that is holding the cmos battery for 20 seconds    say thanks by clicking the star click accept as solution if my reply solved your problem.

9 more replies
Answer Match 50.82%

i currentky have a asus x550c notebook.the only thing that pops up is a blue box asking for bios password how do i bypass or clear password so i can get in bios.thank you

A:how do i clear or by pass a bios password for asus x550c not

Security measures on notebooks etc are getting tough in order protect the owner if they get stolen. This general stuff found on google is about as far as I'm personally prepared to go:http://www.computerhope.com/issues/... Always pop back and let us know the outcome - thanksmessage edited by Derek

3 more replies
Answer Match 50.82%

Bought a second hand Hp Elitebook 2560p  just two weeks ago only to find out that there is a bois password. Any one with the idea od how to clear the bios admin password?











Solved!
View Solution.

A:How to clear BIOS admin password HP Elite 2560p?

Contact HP.   http://welcome.hp.com/country/w1/en/contact_us.htm?l Or download these files.  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-k?fX4AVH8oTCbsOM4X9a?dl=0 Insert clean USB flash drive. Then run USB Image tool. Choose the flash drive then click on RESTORE. After restore remove flash drive. Insert  flash drive into locked laptop and boot.?If HDD is installed remove before booting.? At C:\OUTPUT   type CD..   ?Then hit enter? Then type HPBR    ?Then hit enter? Select   ?FIRST RUN? Then select model. After reboot repeat same above but this  time  SELECT ?SECOND RUN? Some instructions here. http://mazzifsoftware.blogspot.com/2014/01/hp-bios???-unlock-for-dos.html More here. http://forums.mydigitallife.info/threads/49497-HP-???Probook-Elitebook-BIOS-Password-Reset-Utility REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

3 more replies
Answer Match 50.82%

please i can't open my computer i forgot the system or administrator password i have setted to the bois of my labtop ( dell inispiron 15 series 7000   7559 ) please help my to reset it 

More replies
Answer Match 50.82%

Hi to all,
can anyone help to to remove BIOS password of Dell inspirion 3542. because i remove battery but it still asking for "Enter system password" whenever i turn on.
i tried to remove battery but failed to remove / clear CMOS.
it uses Nuvoton NPCE IO chip
can anyone tell me how to fix this issue??
solution email me at [email protected]
thanks.
waiting..........
 

A:Dell Inspirion 3542 i3 BIOS Clear password

Hi,
Thank you for writing to us!
Kindly private message the service tag. You can also reach out to us on our Facebook or twitter page.You can also call Tech support in your region.
Thanks
Robin

2 more replies
Answer Match 50.4%

Right I am trying to change the name of my desktop icons in fact I want to have nothing there justv a blank underneath the icon..

So heres what I did to no avail.

Made sure the numberlock was on..
Rightclick and rename,
Put 0160 which is the code for space.
Press enter and the code 0160 is there now..
Any ideas to what I am doing wrong
 

A:Clear Your Desktop

6 more replies
Answer Match 49.98%

I get 69468630 and system disabled after entering the wrong Bios password thrice.Someone please help.

More replies
Answer Match 49.98%

Forgot password how do I bypass it

A:How to bypass password on my HP pavilion p2 series

Bswaldon. Windows login or power-on password??? REO

1 more replies
Answer Match 49.98%

How do i change the bios password? Or get new one for this laptop... in process of chaging hard drive for a friend... a password screen now comes up and my lunk headed friend does not know it and bought lappy from someone else that he no longer communicates with... I seen many methods online put what is the sure bet, and fastest
 

A:Dell CPi A-Series Password removal?

Have a mod review your post. If he / she approves, I will post a backdoor password for dell laptops.
 

1 more replies
Answer Match 49.98%

This morning i was going to sell my laptop as I am buying a new one but there is no rush.

However, I have been told that I need to remove the initial password. Which I had been told is "BIOS password". To confuse everything, I have also been told it is not a BIOS password. #confused

However, regardless of trying to contact Toshiba non of the U.K. Numbers are working and the email no reply. I had followed the guidance from that website on Toshiba and tried numerous of time all day.

I want this first password removed that comes up, when I switch on my laptop.

I did not put this on my computer it happened with the upgrade. I know the password but I did not install this or remember setting this password.

Can someone contact me please and help solve this matter.

Thank you

More replies
Answer Match 49.98%

Hi
ran HJT
ad aware
aboutbuster
CWShredder
deldomains
AVG
IEFIX
cleaned registry
still can not change desktop settings had a "YOUR IN DANGER" desktop.html cleaned all temp folders but stuff keeps showing up in some of the user temp folders. I've tried everything i can think of to NO avail. Here's the HJT log

Logfile of HijackThis v1.99.1
Scan saved at 11:12:03 AM, on 3/2/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Sygate\SPF\smc.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\AOL\ACS\AOLDial.exe
C:\PROGRA~1\COMMON~1\AOL\AOLSPY~1\AOLSP Scheduler.exe
C:\PROGRA~1\mcafee.com\vso\mcvsshld.exe
C:\PROGRA~1\mcafee.com\agent\mcagent.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgcc.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.exe
c:\progra~1\mcafee.com\vso\mcvsescn.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\PROGRA~1\COMMON~1\AOL\110789~1\EE\AOLHOS~1.EXE
C:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltsmon.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe
C:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltpspd.exe
C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe
C:... Read more

A:Can't clear desktop html

8 more replies
Answer Match 49.56%

I just replaced the Motherboard today for a customer, it worked just great! I went into the bios and recalibrated the battery. Problem is that I think it burnt out the laptop because the laptop will not power on at all, just like before I replaced it.

What I ment was that I think calibration caused the burn-out of the board
 

A:Gateway M-Series will not power on

Laptop motherboards can fail quickly. Was this a new or used board. I really doubt that a battery calibration would damage the motherboard. Have you tried starting the laptop with the battery out?
 

14 more replies
Answer Match 49.14%

when i open bios the Optiplex gx270 series want password.and i forget the password.now i no able to change any setting in bios(setup)than i remove bettrey for 10 minutes.but the bios also wants setup ,any salution for it
 

More replies
Answer Match 49.14%

How do I find /change administrator password in order to install Toshiba updates

More replies
Answer Match 49.14%

I would like to delete most of the icons from my desktop but have them available 1 or 2 clicks. I am trying to speed up start up. Any other ideas appreciated. long time computer user but novice at "customization" Thanx

A:clear desktop but have clone of it one or 2 clicks away

Welcome to the Forums 2vbears45,

You could simply copy all icons to a map in your user folder, that'll give you a nice cleaned up desktop. But I don't think that it'll make your start-up all that much faster.
Anyhow, to delete the icons like the trash bin, you should right click anywhere on your desktop, and then select Personalize out of the drop down menu. In the window that pops up, you should click on Change desktop icons out of the little menu on the left. In the window that pops up you can select what icons you do and don't want to display on your desktop.
To, for example, remove the trash bin icon, simply uncheck the box before Recycle Bin, and click on Apply.



   Note
If you have removed the desired icons from your desktop, you can only put them back using this way.
If you want to have them a few clicks away but not on your desktop, simply create a shortcut before removing the icon.
If you really wish to make your computer start up faster, you might also want to check out the msconfig menu.
Before showing you how, I will warn you, do not mess with it if you don't know what you are doing!
Okay, first open your start menu. In the search bar type msconfig. Click on the program that appears in the menu. In the system configuration, click on the tab called Startup. Here you can select which programs you want Windows to start up when starting up the computer. By default all programs in the list are selected, and so they will all be started upon start... Read more

1 more replies
Answer Match 49.14%

This is probably a stupid questions. I just installed XP x64 and I can't figure out how to get that convenient little icon onto my quick launch that automatically minimizes all the windows. I know the keyboard shortcut is win-D, but I'm accustomed to the icon. Anyone know?

Thanks!

A:Clear desktop quicklaunch icon?

Right click on the taskbar and select Toolbars and then make sure Quick Launch is clicked.

If you lost the icon itself see these instructions to restore it.

BMR777

2 more replies
Answer Match 49.14%

Hello,

this may be in the wrong section, please forgive for any mistake.

Can someone tell me how to completely clear out all Remote Desktop connections, including credentials.

Basically so when open Remote Desktop it appears you never connected to another system.
Kind regards,

Eldin

A:Clear out Remote Desktop connections

  
Quote: Originally Posted by eldinv


Hello,

this may be in the wrong section, please forgive for any mistake.

Can someone tell me how to completely clear out all Remote Desktop connections, including credentials.

Basically so when open Remote Desktop it appears you never connected to another system.
Kind regards,
Eldin


Eldinv, I had to do this and all I did was search for files with .rdp as the extentsion
and delete them.

Of course you have to make sure that hidden and system files are visible.
and in the search tell it to search for filename, *.rdp

Rich

2 more replies
Answer Match 49.14%

Hello All,

This is my first post and I have to give a BIG THANKS as this forum has helped me countless times!

My problem started about one week ago when I installed a new 22" LCD Acer monitor. I upgraded the drivers from the Acer support site and since that time, my system shows no taskbar or icons AFTER i wake up the system. I am currently running the Power as "Always On" with a screensaver kicking in after 10 minutes but this isn't want I want to do on a regular basis.

I suspect that the driver recommended by Acer is for Vista only but I haven't been able to confirm that. Acer's support line has been busy for two days solid. I have tried to delete the drivers and monitors with no success as they just re-install on their own immediately. I've also tried to do a system restore but since I reformatted on 12/12/08, I have been unable to find a restore point that I can restore to.

Any suggestions from anyone? Thank you very much in advance...you guys are awesome!

Thanks!
Gary
Alpharetta, GA

A:Desktop is clear after waking up system

I failed to mention that I'm running XP Pro SP3.

Any thoughts on what can remedy this situation?

Thank you,
Gary S.

3 more replies
Answer Match 49.14%

I have been faced with a bit of a dilemna. One one hand, I love to use Windows Dreamscene. On the other hand, however, I hate what it does to the fonts on my desktop icons.

See the picture.



I'm curious as to how I get those set so they're not clear like that.
I've tried going into CP>Personalize>Widows Color and Appearance>Advanced to set it to a regular color, but it disabled the ability to choose a color.
And so, I am curious if there is a registry fix for this or not.
Or a fix of any sort, for that matter. Anything would really help a lot, thank you.

A:Clear font on desktop dilemna

Maybe one of these would work for you:

Temporary fix for Dreamscene patch in Windows 7 - WinMatrix
DreamScene/desktop icon text fix

2 more replies
Answer Match 49.14%

the fan always run even in IDLE when lan power is on
thanks for all help, who can stop fan.....

A:Satellite Pro L series: Fan always run even in IDLE when LAN power is on

Just view questions:
What notebook model do you have exactly?
What system are you using?
What do you mean by LAN power exactly?

I can just tell you that the cooling modules are controlled by fan table stored in the BIOS.
Usually the cooling fan starts to rotate if the CPU would be loaded by some single applications/processes. It could be also possible that your fan rotates continuously with low performance in order to keep the temperature low. This isn?t a real notebook problem.

2 more replies
Answer Match 49.14%

AMD introduces new low-power AMD Embedded G-series APUPress release, June 26; Joseph Tsai, DIGITIMES [Tuesday 26 June 2012]
AMD has introduced the latest entry to the AMD Embedded G-series processor family with the AMD Embedded G-T16R accelerated processing unit (APU). The AMD G-T16R is targeted at very low power, small form factor and cost-sensitive embedded designs that require a combination of x86 compatibility and graphics. The optimized design of the AMD Embedded G-T16R sips power, with power consumption of just 2.3 watts on average or 4.5 watts thermal design power (TDP).



Read more at... AMD introduces new low-power AMD Embedded G-series APU

A:AMD introduces new low-power AMD Embedded G-series APU

AMD dropped out of the high-end due to fierce competition and running out of steam... it's even /fiercer/ at the low end...

You have to wonder if they have what it takes to be able to thrive at any level.

2 more replies
Answer Match 49.14%

Which new nvidia gfx cards use only one 6pin pcie connector? I can only find 9600 cards for my bro's pc, He's on a tight budget & doesnt want to get another psu if he can help it. Also doesnt want to go ati because he may want to sli in the future.

Do any 9800gtx cards use only one conector, id assumed they'd be the same as the 8800gtx with two.

A:9 Series card power connectors

I think the 9800GT might only use 1.

13 more replies
Answer Match 48.72%

i have no recovery disk nor my password for my T-series W350I gateway laptop. this was passed down from an old friend to help me during my first stages in my college journey.

A:gateway T-series reboot with no password or recovery disk..

gateway t series w350i restore cdhttp://is.gd/BBwNxj

3 more replies
Answer Match 48.72%

i got a hp pavillion g series from a friend of friend. i dont know password and they say they forgot it. system disabled code came up 61363834. i want to restore to factory settings but wont let me till i put admin password orpower on password in.please help

A:hp pavillion g series restore with forgotten admin password

@ronda71 Please enter          74041210 Regards.

1 more replies
Answer Match 48.72%

Hello, i bought a couple days ago a few thin clients from somebody.These has still their password on it for entering the bios.All thins are from the T5000 series. Dous anyone know how to remove this password? / or clear all setting to default?- i searched for a reset jumper, but didnt found it. Only one jumper is near the audio output, but i guess that isnt the one i'm searching for.- kept out CMOS battery for a few minutes, didnt help (maybe i must take it out longer?) thanks in advance, S Drosaert.











Solved!
View Solution.

A:Thin Client T5000 series password reset

Thanks Hanspuppa, it worked. Suddenly i realized that, as you say, some capacitors may still have some charge on them right after shutting them down.So i left the thins unplugged for a whole night, and after that i removed the CMOS battary for 1 hour. Thats all. Thanks for your help..

5 more replies
Answer Match 48.72%

Hi,
I ran series of scan test with all the anti-virus software i could lay my hands on and finnally the ballon that keeps popping up with "your computer is infected " went away even after re-booting.BUT.....i still have this Black screen with a warning message on it saying "spyware detected on your computer" on my desktop.I've tried to change the desktop wallpaper,theme of my computer and then reboot but it doesn't work.
Pls here is my Hijackthis log,pls help me...i'm in trouble.


Logfile of HijackThis v1.99.1
Scan saved at 3:03:51 PM, on 12/21/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\Grisoft\AVG7\avgamsvr.exe
C:\PROGRA~1\Grisoft\AVG7\avgupsvc.exe
C:\Program Files\Spyware Doctor\sdhelp.exe
C:\WINDOWS\System32\alg.exe
C:\Program Files\Citrix\ICA Client\ssonsvr.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\Mixer.exe
C:\PROGRA~1\Grisoft\AVG7\avgcc.exe
C:\Program Files\Messenger\msmsgs.exe
C:\Program Files\Spyware Doctor\swdoctor.exe
C:\Program Files\Microsoft Office\Office\1033\OLFSNT40.EXE
C:\Program Fi... Read more

A:My System seems clear but i've got a warning message on Desktop.Help!

Please download these additional files/programs. Do not run them unless instructed to do so.

smitRem.exe - extract it to it's own folder.

CleanUp!.exe - Install

Ad-aware - install it if you don't have it already. Make sure it's the newest version and check for any updates before running it. Also make sure to customize the settings in Ad-aware at http://www.greyknight17.com/spyware.htm#adaware for better scan results. One updated, and custom settings in place, Close Adaware.

Ewido Security SuiteInstall Ewido Security Suite
When installing, under "Additional Options" uncheck..Install background guard
Install scan via context menu

Double-click the icon on Desktop to launch Ewido
You will need to update Ewido to the latest definition files.On the left hand side of the main screen click update.
Then click on Start Update.
The update will start and a progress bar will show the updates being installed.
If you are having problems with the updater, you can use this link to manually update Ewido
When you have finished updating, EXIT Ewido.


'UNPLUG'/DISCONNECT YOUR COMPUTER FROM THE INTERNET WHEN YOU HAVE FINISHED DOWNLOADING


This webpage would not be available when you're carrying out the fix. Please save the following instructions in Notepad. I have customized my instructions on the assumption that you are using Notepad. It may lead to some confusion should you choose to do otherwise.

If there's anything that you don't understand, kindly ask... Read more

1 more replies
Answer Match 48.72%

Hiya,

For some reason the icons on my desktop have changed. they used to be normal font, with clear background, now they have horrible blue background where the icon text is.

any idea's?
Cheers
 

A:Change Desktop Icon to Clear Font

right-click on your desktop background and go to Properties. Go to the Desktop tab, then click Customize Desktop (near the bottom).

Go to the Web tab on the window that pops up and UNCHECK everything listed under "Web pages".

Save your settings and you're all set!
 

2 more replies
Answer Match 48.72%

At our firehouse we have active directory running with about 200 users. Each user has their own login. At our second station we require each user to log in to a computer at station one via Remote Desktop Connection (the physical computer at station two is using a generic, locked down username).

This works fine, but when the user is prompted to enter their credentials, it always says the last user to log in, usually something to the effect of 192.168.0.33\username. Is there anyway to clear that field so the users do not need to erase the previous username each time?

Thanks in advance. -PJ
 

A:Remote Desktop Connection - Clear username

http://support.microsoft.com/kb/312169/en-us

but it does involve editting the registry and you would have to make an automated script to run it so not very easy or convenient
 

3 more replies
Answer Match 48.72%

I want to install a new Graphics card into my ideacentre 300S11IBR. What I'll be installing is the NV GF GT720 2G VGA/HDMI LP VIDEO_CARD which is recomended by the hardware manual(see page 48) but how would I connect the new connect the graphics card to the power supply? Hardware manual:https://download.lenovo.com/consumer/desktop_pub/ideacentre_300s_hmm_20151104.pdf

More replies
Answer Match 48.72%

Please help!
My Computer is having a series of startup/power problems.
It started off that when I put the PC into standby when I wasn't using it, the blinking light, which signifies standby, would stay blinking even after I logged back onto Windows. I usually fixed that by turning everything off, unplugging, resting the transformer powerbar, and then plugging back in & turning it back on.
Then, early New Years Day, I noticed the computer was off and I didnt remember turning it off, and the blinking standby light was not on.
My settings were set so that it was several hours before my PC would shut itself completely off, and it hadnt been that long since I had used it.

I tried to turn it back on via power button, and I was able to log into my admin Windows user account, but the whole machine shut completely off right around the time when the desktop icons started loading.
I unplugged everything, cleaned a bit of dust out of the inside of the tower, reset the power bar, waited awhile, plugged it back in and started again, same thing several times.
I noticed that the back (smaller) fan was barely going and making no noise--It is usually somehwhat loud on this old computer.

At first I thought it was overheating, which it did about a year ago, but I didnt hear the little beeping that normally occurs when that happens.
I unplugged, reset power bar and turned it on again, and before the login screen loaded, I hit F2 (I think) to go into BIOS settings. I set a Supervisor pa... Read more

A:Computer having a series of startup/power problems

please clcik report and ask to move to spyware forum they are busy though you will be moved back here if needed
 

2 more replies
Answer Match 48.72%

Hello, 

I have a Dell Inspiron I5 / 5000 series which would not start on pressing the power button. I called Dell while it was still under warranty (it is out of warranty now), and they advised to simply remove the battery, and reinsert it. The laptop started fine after this tweak. However, it has done the same now on two more occasions, and worked after doing exactly the same each time.
This is now turning out to be a botheration. Would someone advise on a permanent fix? 

Thanks in advance
Mega

More replies
Answer Match 48.72%

Hi,

I recently bought a Radeon 9800 series (256MB), but I'm having some confusing issues with it. After plugging in the power lead to it on my 300W PSU, when you pressed the power button on the computer, the pc would burst into life for a fraction of a second, and then die. If you removed the power lead from the Radeon, it powered up fine with the familiar "you need to connect your power lead" sign.

I figured a 300W PSU was too weak, so went and bought myself a 500W, but exactly the same thing happens.

Finally, after testing a few PSUs I had around, a 350W seems to work it; however my frame rate is exceptionally slow and 3D Mark results are way below what they should be.

I would ideally like to get the 500W PSU working...does anyone have any pointers?

My Machine Configuration is as follows:-

P4 3.4GHz @ 800FSB with 1MB Cache
1GHz dual channel DDR-3200
160GB HDD space
Radeon 9800 Series w 256MB RAM

Any help would be very gratefully received. I have done a google trawl and a few people complain about power issues - but nothing quite like this.

Lee
 

A:Radeon 9800 Series Power Issues?

No ideas, anyone?
 

4 more replies
Answer Match 48.72%

hi i have a hp 11o desktop pccan someone ples tell me how to boot from a memstick ples

More replies
Answer Match 48.3%

enter adiminstrator password power up password code is system disabled 4854806F can't locate the secondary battery to reset to factory settings

A:enter adiminstrator password power up password code is syste...

Try this57420068

1 more replies
Answer Match 48.3%

When I try to turn on the laptop it says "enter administrator password or power on password" then when I try the only passwords I know for my laptop it says "system disabled 86381856". I don't know what to do or how to fix it and I saw that on a few other threads you were able to help people with the right thing to type in and was hoping you could help me as well cause I'm going crazy trying to solve the issue!! Thank you so much!!!

A:Enter admin password or power on password blue screen

Hi, Enter  39089298 Regards, DP-K

1 more replies
Answer Match 48.3%

Right before this problem happened, I had suddenly experienced a weird screen glitch and knew to restart my computer. Now, it asks for a BIOS admin or power on password which I did not set. What the heck is going on, and what could I do to fix this??  --WHAT-I-HAVE-TRIED--I have tried "12345"I have tried a blank fieldI have tried "biosPower"-------------------------- --COMPUTER-INFO--Product: HP Stream Notebook 11 (no touchscreen)Product version: 8.1 (x64 architecture)---------------------- If I need to put any more info, just ask.











Solved!
View Solution.

A:BIOS "Admin Password or Power On Password" needed for startu...

@GlitchMasta47? At the password screen, hit enter 3 times and you should receive a halt code - enter this on the site below. https://bios-pw.org/ Regards, DP-K

9 more replies
Answer Match 48.3%

hi
i have got a fujitsu siemens laptop and cant remember my bios lock fujitsu wont help me because i aint the original buyer as i bought it second hand from ebay. whne i goto go into the bios it has a password is there anyone who can help me remove this as i need to upgeade my harddrive and cant untill this is solved. please let me know the laptop is s series fujitsu siemens..

any help would be great thank you
 

A:remove bios password on fujitsu siemens s series laptop

8 more replies
Answer Match 48.3%

On my Desktop, whenever I go to Start > Power > Sleep , when I come back from Sleep the Start window is still open.
In Windows 7 we came back to a clean desktop. It does this on 3 PCs.

Is this behavior normal?

A:START window does not clear desktop coming out of sleep

Is your start menu displayed full screen? If so, you could change that.

0 more replies
Answer Match 48.3%

Hello Everyone,

I recently installed Stalker Clear Sky on to my machine and within minutes of playing it crashed to the desktop. After that crash I sought out patches to the game and applied the most recent patch, 1.5xx.10(or something to that effect). After applying the patch my game continued to crash especially when I went to save. I can only play for maybe 5 minutes at a time, and can not play past the first cut scene in the swamps. To be more specific I haven't even left the Clear Sky base.
 

A:Solved: Stalker Clear Sky crashes frequently to desktop

7 more replies
Answer Match 48.3%

Windows 7 Build 7601
New laptop and was installing Adobe reader which aborted.  It left the message below splashed six times over my desktop ... how do I clear this?
"Build in progress ... please do not touch mouse or keyboard!"
I tried to include an image but it said my account has to be verified? 
Thanks in advance

More replies
Answer Match 48.3%

Hi

my laptop has no power,

how can i book a repair?

More replies
Answer Match 48.3%

Good day i have a DELL INSPIRON 15 3000 SERIES.. I started using it from FEBRUARY 2016... I have no problem using it until this June 12 2016.. It just wont turn on... When the adapter is plugged the charging LED opens but later the light will disappear.. I already tried the 30 seconds power press without the battery and the adapter to release the stock power.. But it still doesn't work,,, I'm confused because why do the CHARGING LIGHT TURNED ON WHEN I PUT THE BATTERY ON AND PUT THE CHARGER IN..?? any help please or suggestions... please and thanks

A:DELL INSPIRON 15 3000 SERIES POWER PROBLEM

Hi,
Thank for writing to us!
If the system come up to the Dell logo kindly run diagnostics.
This could be a hardware issue which might need a service call.Kindly provide us with the service tag and email address via private message .
Thanks
Robin

1 more replies
Answer Match 48.3%

I recently purchased a Lenovo Ideacentre 700 series desktop computer from Best Buy.  Though the performance seems to be okay, I've found one 'feature' that is extremely frustrating...the motherboard has a proprietary PSU connector.  The 725W aftermarket PSU I purchased can't be installed because the Lenovo motherboard has a 10+4 pin connector for the PSU whereas the aftermarket PSU has a 'standard' 20+4 pin connector. Since Lenovo advertises this as an "Easy to Upgrade Powerhouse", do they sell an adapter to use aftermarket PSUs?!  If not, is anyone aware of an aftermarket solution that I can purchase?  I would think that enough people have encountered this issue that someone would offer a plug-and-play adapter cable. I've already reviewed the following post on this forum, but it primarily desribes a solution that involves cutting wires and using a paperclip as a jumper.  It also mentions a 24-to-10 pin ATX adapter cable at a site called Moddiy, but a later post says that this adapter unfortunately doesn't work.https://forums.lenovo.com/t5/Lenovo-E-H-K-M-Q-Y-and-ErazerX/IdeaCentre-700-10-Pin-Atx-Connector/td-p... Is anyone aware of an adpater that will work? Thanks in advance.

More replies
Answer Match 48.3%

My laptop is only 7 months old.  I am getting an error message that says"Alert!  The AC power adapter wattage and type cannot be determined.  The battery may not charge.  The system will adjust the performance to match the port adapter."  There is a Note that this can be disabled in the BIOS setup, which I went into and saw no such thing.  Also, at the bottom you can Continue, Enter BIOS Setup or Diagnose.  If I do Continue or BIOS Setup, it won't boot into Windows.  If I run the Diagnose, it takes 6 hours and then will boot into Windows.  I don't dare turn the computer off and have to run another 6 hour diagnostics, which comes up with nothing is wrong.  My computer is much more sluggish and the mouse very sluggish since this happened.  I've read other things about this on older computers, but this computer is virtually new.  Any help would be much appreciated.  

A:Power Adapter Error Message on 5000 Series

Call Dell - they'll send a new adapter first.  If that doesn't solve the problem, they'll replace the DC jack or the mainboard -- all under warranty.

1 more replies
Answer Match 48.3%

Lately I have been having power issues. my laptop is always plugged in (power surge protecter used) i shut it off when not in use. but now even though it is using 100% AC adapter for power; the Li-ion battery is draining, and the laptop shuts off after about 15 min. i have tried to use the laptop with out the Li-ion battery and it shuts off after about 15 min. i have switched outlets and there is no change.

i do use a chill pad at all times. and i have checked all connections and everything is plugged in.

Any suggestions?

charlenein
 

A:Have a Gateway 7500 series laptop with Power Issues

Inspect your battery, and power adapter very carefully for bent pins and contact strips. Assure best contact by bending them outward ever so slightly.
Then consider buying an official Gateway power adapter on eBay.
Power adapters fail frequently enough to distrust them. Batteries have never been as reliable as one would like.
Too much heat or too drastic a cold will ruin the power adapter or the battery. Do not leave any of them in a car during summer or winter temperatures.
 

4 more replies
Answer Match 47.88%

please help me, i reformat my HP 110 Desktop PC Series, but the problem is, the CD needed for installation was lost, how can i retrieve the Product Key? Serial Number : 4CE33904M1 / Product Numer : H6L44AA / Model Number : 110-012d / OS Windows 8

More replies
Answer Match 47.88%
A:admin. password or power on password code 57844054

@teddyb74 Enter  48722090 Regards, DP-K

1 more replies
Answer Match 47.88%

Administrator password or power on password and disabled number is 60649346

A:Administrator password or power on password imy disable code...

Can somebody help me please

2 more replies
Answer Match 47.88%

I've tried just about everything, removing the bios battery and all that and it still pops up prompting me for a password. Can anyone help me out? After three wrong password attempts it locks out to a message saying "System Disabled [51249457]" Thanks in advanced.











Solved!
View Solution.

A:Enter Administrator Password or Power On Password (System di...

@iToa5t? Enter     44121499 Regards, DP-K

4 more replies
Answer Match 47.88%

administrator password or power on password hp

A:administrator password or power on password hp star wars lap...

@Stl20brock? When asked for the password just hit enter 3 times. Post any code you receive. REO

8 more replies
Answer Match 47.88%

I am locked out because I forgot my power on password. I am recieving the code: 50659329 upon 3 failed attempts. Thank you.











Solved!
View Solution.

A:Enter Administration Password or Power on Password (Forgot)

Thank you so much! You're a life saver.

3 more replies
Answer Match 47.88%

Enter administration password or power on password hp 15-af114au review windows 10











Solved!
View Solution.

A:enter administration password or power on password windows 1...

Enter administration password or power on password hp 15-af114au review windows 10

3 more replies
Answer Match 47.88%

enter administrator password or power on password hp.. please 60156263 











Solved!
View Solution.

A:enter administrator password or power on password hp 6015626...

@rekinashu? Enter   75834865

2 more replies
Answer Match 47.88%

my HP Pavilion m6 you turn on just says administrator password or power on passwordI have never set one is password is there a master reset code

A:master code for administrator password or power on password ...

Try to turn it on three time in a row. The BIOS should display a set of numbers while it informs you that the system is locked. Post the numbers and letters if there are any and I will see if I can help you out.

9 more replies
Answer Match 47.88%

Hi  Can anyone help me sort a problem out. I cannot for the life of me remember the power on password and now all that shows is system disabled and a code 69468164 Is there a way to clear the old password??? Any help appreicated











Solved!
View Solution.

A:Power On Password lost - Adminsitrator Password - BIOS

@26kenley? Enter     76540160 Regards, DP-K

4 more replies
Answer Match 47.88%

Enter administrator password or power on password after 3 tries I get a 76392325 code. Please help.

A:HP stream Enter Administrator password or power on password

Hi: Enter this unlock passcode... 69090901

1 more replies
Answer Match 47.88%

I recently got a computer from a pawn shop and it says I need an administrative password it is a pavilion dv7-1261wmP/n is nm295ua#abaProduct key is 3w78r-cx4gc-27xxq-tqry7-j246kPlease help

More replies
Answer Match 47.88%

I need help Spoiler (Highlight to read)Spoiler (Highlight to read)Spoiler (Highlight to read)error cod 60753518enter administrator password or power on passwordsystem disabled         60753518 error cod 60753518enter administrator password or power on passwordsystem disabled         60753518 error cod 60753518enter administrator password or power on passwordsystem disabled         60753518 











Solved!
View Solution.

A:enter administrator password or power on password system dis...

@AbdallhHussein? Enter     75631538 Regards, DP-K

4 more replies
Answer Match 47.88%

My halt code is 67281019ive tried admin, [blank] but does not work, is there a way to fix this problem?











Solved!
View Solution.

A:Administrator Password or Power On Password Blue Screen Help

@mazdau? Enter    78189039 Regards, DP-K

4 more replies
Answer Match 47.88%

When I turn on my computer it asks for the administrator password or power on password. I forgot it and entered something 3 times and got a system disabled message with code 843448331











Solved!
View Solution.

A:Dont remember admin password or power on password. When i tr...

Hi, Enter   31022215 Regards, DP-K

4 more replies
Answer Match 47.88%

I forgot my password the screen on start up says enter administrator password or power on password. When I enter it wrong 3 times a new screen appears system disable. [69114244] please help I need this fixed asap. I use my computer for both work and school











Solved!
View Solution.

A:forgot password ..administrator password or power on passwor...

Hi, Please try:    76872880 Regards.

10 more replies
Answer Match 47.88%

Hi, I work at a pawn shop, and we have a problem we have never encountered before.  This laptop, which is cleared and is now for sale in the shop, now asks for an administrator password or power on password.  It did not do this when it was brought in, nor when it was pulled from the back.  We were going to power it on for a customer, and it just started asking us for this password. I have seen in another post that you enter through it 3 times to get a code, so here is the code:61987774 Any help on this would be greatly appreciated. Thanks











Solved!
View Solution.

A:Remove Admin Password/ Power On Password on Boot Up

Please try this Password = 74685370 Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,KNRKAlthough I am an HP employee, I am speaking for myself and not for HP

3 more replies
Answer Match 47.88%
A:Stuck at "Enter Administrator Password or Power On Password"

@Jammer88 Enter:     37965136 Regards, DP-K

3 more replies
Answer Match 47.88%

hello, I have a hp stream  model number 11-d010wm. that my kid has forgotten the password. im not sure why but it now wont let me do a system recovery or even get in to the bios. ive tried all the F keys during start up and nothing. all i get is a message saying enter administrator password or power password (which i dont know). i try some random passwords and eventually i get a system disabled screen with the error message saying [ i 54723220 ]. please let me know if there is some sort of solution for this. i dont need anything on the computor so just wiping it fresh would be fine if nessessary.   thanks, chad

A:Hp stream enter administrator password or power password

@dahc1991? Enter   41681806

2 more replies
Answer Match 47.88%

when i try to start my laptop it showing error (ENTER ADMINSTRATION PASSWORD OR POWER ON PASSWORD) 











Solved!
View Solution.

A:enter adminstration password or power on password error

Harry Enter   46762314

6 more replies
Answer Match 47.88%

Enter administrator password or power on password the system disabled number 53352373











Solved!
View Solution.

A:Enter administrator password or power on password the system...

@wagidogg? Enter  42030975 Regards, DP-K

4 more replies
Answer Match 47.88%

System disabled, 63547877.  Please help, Thanks.











Solved!
View Solution.

A:Enter Administra‚Äčtion Password or Power on Password

Hi, Please enter     72425279 Hope this helps.

2 more replies
Answer Match 47.88%

Hp pavilion g series . System Disabled .55748040











Solved!
View Solution.

A:Enter Administrator password or power on password.System Dis...

Product Name: Hp pavilion g seriesOperating System: Microsoft Windows 7 (64-bit)Hp pavilion g series . System Disabled .55748040

2 more replies
Answer Match 47.88%

Pls help me am new here if I turn on my laptop mini I was ask to enter administrator password or power on password, I tried it three times and I code this code:63777861Help plsThanks

A:enter administrator password or power on password laptop min...

Hi: Enter this unlock passcode... 72655267

1 more replies
Answer Match 47.88%

I Home School both my children and I currently only have  1Laptop to use and need the one that my 4 year old turned off and now its asking me for the adminstrative or Power on password? This Has CREATED A Huge problem My computer is asking me for a Power On Password/Admin Password. I Don't Remember this password or where I would have written it down. Is There another way to access my system without taking it in and it costing me a ton of money for someone to do something as simple as Inputting a simple pass key or something ? Please someone anyone help me if you can.... Thanks So Much THIS IS THE CODE IT IS GIVEN ME after 3 Failed attempts******52199612******











Solved!
View Solution.

A:enter administration password or power on password error Wit...

OH MY GOODNESS !!!You are my life saver thanks so very muchThat (I'm sure you already know worked)Thank You Thank YouG_B_Y_

3 more replies