Tech Problem Aggregator

Lenovo Y510p not working?

Q: Lenovo Y510p not working?

More replies
Answer Match 80.22%

My Lenovo Y510p isnt working, Im on my phone but ill show a video of whats happenning: https://youtu.be/d1nhfJ3PUZ0So my laptop will only turn on for a few seconds before shutting back off and then trying tobshut back off. I cant go into bios, it still crashes after a few seconds. Also a weird thing is itll be stuck in that restarting loop until i plug my charger in and then it just wont turn on at all? It first happened a few months ago but i took it to the shop and they said i was working just fine. Worked for another month, and then did it again, and then it lasted yet another month now doing thia again. The same thing every time. I had it worling yesterday, somehow it just started spontaneously working, and then after shutting it off today it started to loop again. I dont know whats wrong with it??

More replies
Answer Match 80.22%

My Lenovo Y510p isnt working, Im on my phone but ill show a video of whats happenning: https://youtu.be/d1nhfJ3PUZ0So my laptop will only turn on for a few seconds before shutting back off and then trying tobshut back off. I cant go into bios, it still crashes after a few seconds. Also a weird thing is itll be stuck in that restarting loop until i plug my charger in and then it just wont turn on at all? It first happened a few months ago but i took it to the shop and they said i was working just fine. Worked for another month, and then did it again, and then it lasted yet another month now doing thia again. The same thing every time. I had it worling yesterday, somehow it just started spontaneously working, and then after shutting it off today it started to loop again. I dont know whats wrong with it??

More replies
Answer Match 63%

Hi, I have two question : 1. I bought a caddy for lenovo y510, but my Sandisk Ultra 2 ssd is only reconize as sata 2. Is there a sata3 or sata2 support? Is there any problem with caddy? 2. Also I was wondering if I can install a M.2 SSD. My laptop is still in warranty, I didn't open it. If yes, is worthy for daily use to sell my Sandisk ssd for a M2 ssd? Thanks!

More replies
Answer Match 63%

My adapter was burned, and my computer has only one graphics card.Now I want to add another graphics card so I need to buy exactly the same adapter 120W?And where I can order new adapter.I am from Israel. thx

More replies
Answer Match 63%

I bought one of the first Lenovo IdeaPad y510p. Having a dual gpu made for a lot of gaming fun. Yesterday, the room filled up with the smell of an electrical burn. I checked the underside the Lenovo. It had been hotter. I heard workers outside my window and figured that the smell may come from them. A few minutes later very thick smoke came out of the left air vent and made a column in the air. I quickly pulled out the power cord and battery. Luckily, the house is still standing. I understand that electronics eventually fail. Yet, this seems unsafe and dangerous. What if I weren't in the room to act quickly? There should be some way to report this. The support page to send a message has been down with an under maintenance message for days.

More replies
Answer Match 63%

Hey, I bought Lenovo y510p laptop like 2 weeks ago. It is the SLI version of the y510p. The laptop worked just fine when I was playing with it, ran CSGO and Skyrim on Ultra settings over 60 fps. Couple days ago, my friend broke my charger, and I went to Walmart to buy a new one. I bought the Duracell charger which is 90 watts and it was compatible with my laptop. Then I plugged it in, and tried to play csgo but the fps was like from 5 to 15. I have no idea how this happened. I also took off my battery and just tried to play it without it and just charging the laptop, and when I opened csgo the laptop shut down. I already made virus tests and there was nothing in the viruses. Please help me if you can, I really wouldn't want to send this to the warranty since it's brand new and propably gonna take atleast a month. Thank you already!
Specs:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 8
RAM: 8138 Mb
Graphics Card: NVIDIA GeForce GT 755M, -2048 Mb
Hard Drives: C: Total - 913054 MB, Free - 795269 MB; D: Total - 25599 MB, Free - 16086 MB;
Motherboard: LENOVO, VIQY0Y1
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
 

A:Lenovo y510p slow fps

My guess is that the Charger may not be compatible with that laptop....90watts yes but has it got the correct DC output.

Also you didn't say how your original charger got broken. like was it attached to the laptop at the time?

What could be happening is..when you plug the new power supply in it is not the correct power your PC expects so it disregards it and runs off the battery at lower everything. As when you take the battery out it will not run at all. Easy place for damage is where the power plug goes into the laptop.
 

1 more replies
Answer Match 63%

Hello guys, Im using Lenovo Y510P with the following specs:4th Generation Intel Core i7-4700MQ / 16GB RAM / Full HD 1080p 1920 x 1080 / 1TB HDD + 24GB SSD / Dual SLI NVidia GT750M 2GB / Bluetooth / CamI got this laptop from my brother, and i use it to play Counter Strike Global Offensive (CSGO) game. I have seen this laptop getting around 250fps in most of the maps in CS GO, but still I am getting only 124fps in every map with low settings. Can any of you guys suggest any tips to correct this?  Thanks in advance  EDIT: Does installing the OS on the 24 GB SSD affect the gaming performance in any way? My SSD got damaged and there is no SSD in it currently. The is only the HDD.

More replies
Answer Match 62.16%

Hi Guys, I have Lenovo Y510P with Windows 10 and i recently installed a new MyDigitalSSD 256GB in the M.2 slot (instead of the 24GB cache ssd) and i'm using the ssd as my main drive for OS and programs. I'm getting reandom freezes during regular operation, I can still move my mouse duriing those freezes but that's it, it won't unfreeze unless I do an hard reset.. Those freezes happen only when the OS is running from the SSD, when I'm I run a copy of that OS from the HDD, it doesn' happen ad everything works. Before installing the ssd, every cache software was uninstalled and i even tried a fresh new clean win10 install on the ssd but the freezes still happens. I read and tried LOTS of solutions (checking for errors in the ssd, disabling SLI, disabling LPM, etc.) but nothing helps. I'm really desperate for a solution, Doesn any one has an idea on what is the problem? 

A:Lenovo Y510P with a Windows 10 on SSD randomly fre...

what i understood is that slot you got there isnt meant for a big SSD :/ so thats probably why os freezes some times it's a cache slot meant for small sized ssd cache drives if understood it right.

7 more replies
Answer Match 62.16%

Hello 8-forums.

I'm posting on behalf of my little brother since he isn't the sharpest when it comes to computers. Today his computer started freezing and crashing out of nowhere at completely random times. I couldn't pinpoint an activity he was doing which might have caused it.

On top of that a pop-up kept coming up on his screen about his screen driver having crashed and has been restored. I happen to have the same laptop and I've had this problem for a week or 2 too, but nothing happens when it shows up on my screen (unlike his, where it crashes the computer). His screen now also has blue matrix-like lines all over his screen as a result of todays crashes.

I asked him to send the Zip-file from the DM log collector tool. He only had a BSoD once and he didn't notice the error code. The rest were freezes (forced to restart) and crashes (no BSoD screen).

Hope you can help find a solution to my brothers problem.
Regards Jens and Walther

A:Lenovo Y510p - Freezing/Chrashing

Hi Snejxjens,

Welcome to the 8forums.

Please remove some files to increase the free space to at least 10-15%.
Every partition needs at least 10-15% free space so Windows can do its thing in the background.
   Warning
Less free space could cause BSOD's

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from the manufacturer.

Code:
1: kd> lmvm nvlddmkm
start end module name
fffff801`86694000 fffff801`872ec000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Mar 04 12:07:52 2014 (5315B408)
CheckSum: 00C20523
ImageSize: 00C58000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


Please run a threat scan with Malwarebytes*, a full scan with your AV, scan your system with Adwcleaner, Kaspersky TTDSKiller and ESET Online Scanner
*(Uncheck trial version in the installation process)
Remove Spybot

5 more replies
Answer Match 62.16%

Hello guys,  I bought my Lenovo y510p for months ago, tried with several SLI games to run those. They all crash, and returns the screendriver has stopped working. I have the y510p with GT 755m sli. Any solution for this?? If I run without SLI all is working good.   

A:Lenovo ideapad Y510p SLI Crashing

Have you updated your video card drivers with the latest drivers from the Nvidia website?  Have you monitored your GPU temperatures to see if either of your GPUs are overheating?  You can try using GPU-Z to monitor your GPUs while gaming.

9 more replies
Answer Match 62.16%

Need ur help. Laptop was working perfectly. No problems. No issues. Yesterday after shutting down laptop, it not getting START. When i pressed power button, its power led and battery led lit up and nothing goes up.(Even optical drive tray and keyboard's backlight )Only the BLANK screen shows up. I have tried hard reset method but its not working and my laptop isnt in warranty period. Please help me.

A:Lenovo Y510p laptop won't start

Hi Adil,
 
Welcome to Lenovo Forums.
 
Kindly perform Power Drain and set BIOS default:
Try turning off and removing the battery first. With adapter charger unplug, press Power button for 15seconds to drain power inside.  Plug in adapter charger and press Novo button instead of the power key to turn it on for the Novo Menu  Choose BIOS setting  On Exit tab , load optimal default then Y then place battery back before save changes and exit.
 
Let us know how you get on.
Regards,
Shashi
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

1 more replies
Answer Match 62.16%

BSOD-xperts:
I've suddenly been afflicted with BSOD's on my Lenovo Y510P running Win 8.1. Everything was fine until about 2 weeks ago and then I started experiencing multiple BSOD's to the point that I had to boot in SafeMode. After doing some research, it looked like the issues were related to video (NVIDIA GeForce GT 750M) and wireless/bluetooth drivers. I upgraded all of those and everything was fine for a week until this morning when I got another BSOD. After looking for the bug check that it reported, I stumbled on this forum and saw some excellent responses so I thought I'd give it a whirl. I downloaded BlueScreenView and ran that and I've attached the output. I have also attached output from the MiniToolBox tool. I also tried to upload the mini-dump files but I get a message saying I'm "not permitted to upload this kind of file" but I'm happy to do so if I'm allowed to.  Here is a link the output from the Speecy tool as well - http://speccy.piriform.com/results/j7BzfFXyiX3xHgrhWQqHjXV. Would someone be so kind as to give it a look and let me know your thoughts? Thanks!
 

 

A:BSOD in Windows 8.1/Lenovo Y510P

Can you please upload the whole minidump so I can examine it?
 
It is located in C:\windows\minidumps. Select the most recently created file.

3 more replies
Answer Match 62.16%

Hi all, I have the lenovo y510p SLI 750m version and recently (2-3 days ago) my cpu fan on the left side of the laptop stopped working with the dust removal tool. I removed the lid and I can see both fans spinning just fine, however only the right one actually performs the dust removal when prompted. The other one stays queit and I don't feel any air pushed out of the left side. I can feel it on the right like normal though. Any ideas on how to fix this? 

A:Lenovo y510p Dust Utility

Hi sifuraga , 
 
Greetings. 
 
You can initially power drain the system , turning it off removing the ac adapter and battery then pressing down the power button for 12 seconds . Start the machine using the Novo button (page 82) to launch the Novo menu for BIOS set up and set BIOS defaults f9 save and exit F10. Check the BIOS version.
 
Check how it goes else proceed with uninstalling and fresh installing the Lenovo power mangement tool . Restart and recheck . 
 
Update us how things go. 
 
Regards

1 more replies
Answer Match 62.16%

Hi folks I'm new to the forums to please excuse me. I'm currently posting from my phone so when my laptop comes on I'll attach the debug file.

Basically I set my laptop to sleep instead of shutting it down and when I went back to resume my work (about 20 hours later) it was running very slow.

I was searching for my 'Calculator' but made a typo so I tried backspacing the letter but nothing happened. Chrome (which I had opened at the time) was unresponsive and so was my taskbar.

I waited a while to see if anything would happen but nothing did so I forced shut down.

I left it off for almost a half hour and when I put it on I got that error 'Unmountable_Boot_Volume' and it needed to restart and so it did but then the error came up again this time it did an automatic repair which lasted a few seconds then it was diagnosing which lasted a few seconds and then I got the following message:

Automatic Repair
Your PC did not start correctly.
Press restart to restart your PC which might sometimes fix the problem. You can also press Advance options to try other options to repair your PC.

I clicked restart and it did.. I got a black screen for a minute or two but I got to log in. But once again everything was moving slow so as the start menu seemed to be working I shut down the laptop. (It's currently off)

Can anyone assist me with this problem?
It would be really good if I can actually find out what's really wrong with my laptop.
Thanks.

P.S. See attachment

A:BSOD Unmountable_Boot_Volume Lenovo Y510P

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

For this crash, I suggest you follow the tutorial below for troubleshooting.
If you have any question, please ask them.
Troubleshooting stop 0x7B and stop 0xED. - Windows 7 Help Forums

3 more replies
Answer Match 62.16%

I purchased my Y510P back in Q2 2014, it was already on Win 8 when I purchased it. Everything was working fine even after the  SLI issue with  Win 8.1 which was fixed through a BIOS update that was available here in their product support page. During that time I worked more on other things and didnt really notice anything about the GPU and its update. I was able to update my laptop to Win 10 (back in Q4 2015) and I'm currently unsure if it already installed the anniversary update. Recently, I tried some few games and noticed that the second GPU seems not be working during any games I've launched. I ran Unigine Heaven Benchmark and seems that the SLI is detected, checked the device manager both hardwares are detected, and updated to the latest GPU driver. But still seems to be not working. Any help will be highly appreciated. Thanks.

More replies
Answer Match 62.16%

Hello! I'm using my Y510P with an external display and thinking about buying another one, so here's my question - how many displays are supported by the GPUs? According to the ark.intel.com, my CPU supports up to 3. Is it including the laptop's screen? I'm planning to use ONLY two externals. Specs:i7-4700MQ755M SLI16 GB RAMWin10 x64Benq GW2270 

More replies
Answer Match 62.16%

I have the lenovo y510p (59370015). It has a disk drive in the Ultrabay. Does this mean that there is no Nvidia graphics card in the laptop? If this is the case, then why are there a bunch of Nvidia files on it? If this is not the case then how do I get the card working, I see it with a Error Code 43 in device manager.

More replies
Answer Match 62.16%

Hi there. I'm just hoping that I can find the solution as soon as possible. So I tried playing some casual games yesterday and all of a sudden the game froze and the image started tearing apart. Next thing you know it, the screen went blank. So I force shut down it and reboot, but after the Lenovo logo, the screen goes blank. There's a faint glow, but there's no image or cursor. Could it possibly be that the GPU crashed and there's no graphic to power the display? Or should I try entering Recovery Mode or Safe Mode to switch the display graphic to Intel HD? Besides, how do I enter Safe/Recovery Mode since I'm on Windows 10. Any help would be much appreciated.  

More replies
Answer Match 62.16%

I just want to comment on this - because I'm having the same issue.  I've used the laptop for a number of months without crashing issues, and it seems to have cropped up pretty recently.
 
I think it might have something to do with the driver version?  It also only seems to happen with certain games.  In particular, War Thunder and GTA4.  I play Dota 2 quite a bit and don't seem to have any problems at all.
 
 
2/2/15 EDIT: This post was moved for escalation purposes. Amy_Lenovo

A:Re: Lenovo y510p GT 755M SLI Problem

Hi,I have a problem when playing any games with SLI enabled. Games crashes at random times, sometimes even after ~5mins. So at that specific time the screen goes black and the game minimizes (or I try to minimize it by myself). After that the message pops out saying "Display driver stopped responding and has recovered". I have latest Nvidia drivers (v344.11). I'm running Windows 8.1 x64. The problem occured with any version of display drivers I've installed so far. 

9 more replies
Answer Match 62.16%

Hello, I just bought a new y510p laptop few days ago. It works fine for frist 3 days. Now, when I turn on the laptop, it stuck at lenovo logo screen and then restart. The recovery key doesnt work as well, it also dispay lenovo logo and then restart. I really appreciate if anyone can help, thanks

A:y510p stuck at lenovo logo

Additional information: I don't connect any external device. I cannot access BIOS using F10 key

9 more replies
Answer Match 62.16%

Hello everyone,  I bought a y510p about two years ago and for the first year it worked flawlessly then one day it wouldnt start up. What would happen is it would try and boot up and show the Lenovo message then go into the novo boot menu and after 1-2 in that menu it would crash no matter what option was chosen and would keep doing it over and over. It also would only do it if the A/C cord was NOT plugged in. If A/C power was plugged in it wouldnt start at all. I gave up on it for about 9 month and it sat in my closet About 3 days ago i tried it again and it booted up fine no problem, did windows updates, restarted multiple times and no problems until today where it shut down and reverted back to what it did before. Any ideas? I am stumped and believe there might still be life in it.  Thanks! 

More replies
Answer Match 62.16%

I have the lenovo y510p (59370015). It has a disk drive in the Ultrabay. Does this mean that there is no Nvidia graphics card in the laptop? If this is the case, then why are there a bunch of Nvidia files on it? If this is not the case then how do I get the card working, I see it with a Error Code 43 in device manager.

More replies
Answer Match 62.16%

Hello!So my laptop is out of warranty and a few days ago i noticed that the sound quality from speakers is decreassing. I than realized that only the right speaker is functioning very poorly (i can bearly hear it and its making crackling noises). Than i reinstalled the audio drivers - nothing changed. So that must mean that the right speaker is dying! Where can i get the spare parts and which ones do i need? Thank you! Jan

More replies
Answer Match 62.16%

I am trying to fix some things on my laptop. Everytime I enter the serial number on the lenovo website, it comes up as the number not existing. I am reading the same number off my laptop as the bios. 

More replies
Answer Match 62.16%

Hi there,I've got lenovo y510p(with sli) about 6-7 month ago.I'm trying to play cs go but while im playing with sli on, game is crashing ( something like stucking or teasing i should say, and then there being bzzzzzz sound on the background just like when you are trying to change resolution). Im being able to press ctrl+alt+del and close the cs go or sometimes it doesnt even let me do it so i gotto close pc with power button.As far as i know its not happening on other games.My all drivers are up to date.I monitored the both graphic cards' heat and and they are usually 60-65C degree.Power charger is 170w.At this point I don't know what to do. I was looking for an answer for this problem in internet but couldn't find one. Can you please help me? Pc Specs Os :Win 8.1 pro 64bitBios: InsydeH2O Version 03.73.0674CN44WW(v3.05)                Processor: i7-4700MQ 2. 40 ghz           Ram : 8gb              Graphic cards : 2xgt755 one's brand is samsung other one's is hynix

A:Lenovo y510p cs:go is crashing while playing on sl...

Hi AnnoyingPear,
 
Welcome to the Forums      
  
As per the query we understood that you are facing issue with system crashing while playing games in your Lenovo Y510p laptop.
 
As you have mentioned that this issue does not occurs in other games, please uninstall the game and reinstall and check for the issue as this looks like it is a issue with the game.
 
Hope this helps. Do post back if the issue persists!                                                   
 
Best regards,                                                          
 
Ashwin. S




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter... Read more

9 more replies
Answer Match 62.16%

I am trying to fix some things on my laptop. Everytime I enter the serial number on the lenovo website, it comes up as the number not existing. I am reading the same number off my laptop as the bios. 

A:How to find S/N or IMEI of Lenovo Y510p

Hi liberate26 , 
 
Welcome to the Community Forums.
 
I believe you have the right Serial Number as described here on how to find it .
It may be that at the moment support server is currently on update with the database as here in this recent discussion.
 
You may call in tech support for further assistance or you may send me the your SN in a private message as this should be confidential, and things you would be needing.
 
Update us as soon as convenient for you.
 
Regards
 

1 more replies
Answer Match 62.16%

Dear Lenovo family! I have bought this laptop (Y510P) around the end of December 2013. I have just decided to write these after long time of having issues with gaming. Also tooday I have just changed my Hard drive to SSD with booting windows 10 64bit from scrach hoping that it would all come to an end however it did not. -I have updated all the software, drivers etc. I have uploaded a RAR folder including my Nvidea system information, speccy system screen shot and all the logs from event viewer.  Now here is the problem I am having. When I start playin a game (For instance CS:GO) at first it is all good:-As soon as I run the game SLI gets activated.-Fans starts getting faster and both graphic cards getting warmer.-After 10-15 minues of gameplay, game freezes, screen gets minimized for 3-4 seconds and eveything freezess then games screen comes back and another 1-2 seconds game freezes then starts back on.- Problem repeates after another 10-15 minutes of game play. What  could be the problem?Could it be CPU speed is not properly working?Could it be because of the Graphic cards? I will be waiting for your help! Thank you all!  

























Evrim system info.rar ?26 KB

More replies
Answer Match 61.74%

Hi,about a year ago I bought a lenovo y510p and in the beginning I was really pleased with it. It handled games just fine and I never had problems while gaming.All of a sudden, my gaming performance was really bad: really low fps on the settings I used to play on, even on the lowest settings it doesn't get to very playable framerates (BF4, FarCry 4)I didn't do anything to my laptop, he is still plugged in, power management is on high performance, Nvidia drivers are up to date..I've been having this problem for about 2 months now and I'm starting to be really annoyed by it!Helping me would be greatly appreciatedThanks in advance-Arthur

A:Poor gaming performance on lenovo y510p

Check for overheating using HWMonitor?

9 more replies
Answer Match 61.74%

Hi Guys, This is something that has been bugging me for almost a year now and I've just been really lazy to solve the issue.The problem is because for some reason, unknown to all except Lenovo, they decided NOT to support Windows 10 for a couple of the laptop models that they had in their product line when W10 was launched. Just my luck, my Lenovo Y510 (Model No - 20217) is among those unsupported PCs and hence there are certain features that no longer work.(Laptops-and-netbooks :: IdeaPad-Y-Series-laptops :: IdeaPad-Y510p-Notebook :: 20217 - Lenovo Support... As you can see, nothing for W10)PC Specs:- Lenovo Y510P (Model No - 20217)- 8GB RAM- NVIDIA GeForce GT755M- Windows 10 Home, Version - 1511- Intel Core i7-4700MQ CPU @2.4GHzThe issue that I'm facing is that my Webcam just wont work. Issue that I can see:- The light adjacent to the webcam on the laptop keeps coming on and going off and then finally just stay off (each time I try to use the camera)- Skype and other applications that need my camera can no longer detect it. Initially, my video keeps on appearing and disappearing until it finally just goes and stay disconnected, as though I don't even have a camera.- Error message on my Camera app when I try to open it: "We can't find your camera. Error code - 0xA00F4244(0xC00D36d5)- When I go to my Device Manager, there is no list called "Imaging Devices" as a whole. There are number of users who have faced this issue and there seems to be no proper solution for this. For s... Read more

A:Lenovo Y510P (Unsupported for Win 10) Camera Drive...

Something you can try is to do a clean install of Windows 10, and use the generic built-in drivers that come with the operating system.Create a live USB of Windows 10 using Rufus or burn the *.iso to a DVD after you download if from https://www.microsoft.com/en-in/software-download/windows10

2 more replies
Answer Match 61.74%

Hello.I am the owner Lenovo IdaePad y510p Intel i5 4200m.Not so long ago I bought a i7 processor 4810MQ.Both the i5 4200m and i7 4810MQ work on the Socket G3 also known as RPG 946B/947 or FCPGA 946 but with the difference that the intel i5 4200m has a TDP of 37W and Intel i7 4810MQ has a TDP of 57W.So after update the BIOS to version 3.08 willingly I took up the replacement processor.To my surprise, after an exchange with i5 to i7 4200m 4810MQ laptop will not turn on, for a short time (1 to 3 seconds) shone on the white button "power" but immediately afterwards extinguished.I suspect that it is a voltage input to the processor, but the BIOS is not possible because the feature voltage change is not visible / hidden. I hit it on:https://www.techinferno.com/index.php?/forums/topic/3546-lenovo-y410p-y510p-unlocked-bios-wlan-white...but it seems to me such output last resort, and I wanted to ask what to do now.I do not want to believe that the 300W power supply does not could handle the additional 20W per processor.What to do in my Lenovo IdeaPad y510p to use Intel i7 4810MQ?I'm sorry for his handling of English who constantly grind.Thanks!!!

More replies
Answer Match 61.74%

I have a Lenovo Y510p with 2x GT 755m cards in SLI. When playing games like WoW the MAX GPU temps on Card 1 reach 90°C. On Card 2 85°C.At this point the game starts to stop responding. The screen will go black for about 1 second andthe laptop's fans will slow down for just a moment before the game resumes and the fans go back up.This will happen pretty much any time the temps hit 90°C again. I have a Notepal U3 laptop cooler with 1 fan on each GPU intake slot and 1 on the center of the laptop.I have also repasted the CPU & BOTH GPUs with Arctic Cooling Silver 5.I have modded the bottom case of my laptop to allow more air into the laptop.The BIOS is also modified (so are the GPU BIOSes) To stop the crashing I tried upping the voltage on both cards by 012.5mV - 025.0mV. This didn'twork at all. Games always seem to stop responding when temps get to 90°C. However my laptopshouldn't even techinically be getting this hot in the first place. I'd rather max temps to sitaround 80C. This laptop has always run pretty hot and I've always felt like I got a lemon as others haveexplained to me that their laptops don't get anywhere near as hot as this. As such I have some questions for other Y510p users: 1. What are your MAX temps whilst doing some extensive gaming?2. Have you repasted your CPU & GPU?3. Have you modded your Y510p fan intakes to allow for more air?4. Do you use a cooler?5. Do any of the games you try and play ever stop respo... Read more

A:Questions about Temps for ALL Lenovo Y510p Users!!

???? ?????? ?????. ????? ??????? "IntelŽ Extreme Tuning Utility". ? ?????? ??????????. ?????? ??????? ??????? ?????? ?????????? ? 3.4 ?? 2.4. ??????????? ??? ????????? ? ?????? 75 ????????. ???? ???????? ???????, ??? ???? ??????????? ????? ?? ????????. ????? ? ?????? ???????, ??????? ??????? ???????? ??????? ?????????, ????? ?????????? ?? ?????????????.????? ? ?????? ?? ??????:https://download82.files.attachmail.ru/6A32D1112DF94C2093B85DBB64A206D3/6f0a2098da09b88c3e7588cc5723...

1 more replies
Answer Match 61.74%

I connect my phone to my laptop (windows 8) and initially it pairs just fine. Both my computer and phone say it is paired. After about 15 seconds my computer shows it as disconnected but my phone still says paired. When I try to send a picture from my phone to my laptop it obviously fails, even when I try to send it right away. I updated all the bluetooth drivers and I am still getting the same problem

A:Phone keeps disconnection from bluetooth on lenovo y510p

Either your computer is shutting down that connection after 15 min's or it is your phone. It helps to know what OS the phone is running and which mfg & model of phone you are using.

7 more replies
Answer Match 61.74%

Hi all. I recently obtained a used lenovo y510p from a friend with the following configurations. Windows 8.1 ProSLI capable with 2 geforce 750M cards6gb RAMItb Hard disk2gb dedicated video memory. It plays games at decent speeds with medium settings but I get different errors from each of the 3 games I've tried. For dragon's dogma dark arisen, the game suddenly slows down for a few minutes and picks up speed again after a few (maybe 5) minutes. With mass effect 2 the game screen hangs, while sounds and music continue as normal. ctrl alt deleting and pressing esc will make the game proceed as if nothing ever happened. Finally, for the witcher 3: wild hunt, I get the windows display driver has stopped responding error. The games are properly purchased and as far as i know, so is the OS. I've tried all nvidia display drivers between and including 347.09 to 364.72. I've tried closing all other apps, and ending all nv processes in the task manager. I've also tried different power plans and different nvidia power management modes. I've been monitoring the temp with HWmonitor and it usually tops out at around 81c which I understand is fine for this particular laptop. I even have a targus chill mat to help regulate the temp. Lastly, I've spoken to my friend and he doesn't remember having those issues at all, but he never managed to game with the laptop very often. Any help would be appreciated, this is my first lenovo product. I pereviously owned a dell xps.

More replies
Answer Match 61.74%

Hi all. I just bought my Y510P from a guy on craiglsist who had barely used the laptop. (Like turned it on once and then put it in the corner for a year and a half)  When I got it, the guy had restored everything to the factory settings which was just Windows 8.1. My first problem is that the computer keeps defaulting to use the HD 4600 instead of the 755M that I have set as the default graphics card in NVIDIA Control Panel. I disabled the 4600, but then the computer was super slow. Any idea why this is happening? My second problem is that I can't find anything to speed up the fans so that the computer will automatically overclock the i7. I'm tempted to slowly force it to overclock and have the fan speed increase with the temperature, but I'm afraid that I'm going to break something that way.  If anyone knows of a way to control the fan speed then that would be great. Thanks. Computer specs: Lenovo Y510Pi7-4700MQ8GB RAM1TB HDD24GB SSD (PCIe)Intel HD 4600 Graphics and GT 755M

More replies
Answer Match 61.74%

So since christmas is coming, I was thinking it would be cool to upgrade my 8gb RAm to 16gb My question is: what kind of memy card I need to my lenovo ideapad y510p? and do I need to change my old memory card aswell if im buying new one? Also is it easy to change those RAM cards ?











Solved!
Go to Solution.

A:Lenovo Ideapad y510p - memory upgrade

They're RAM sticks, not cards, and they're fairly easy to change out. I would suggest looking for something in the 1866mhz speed, though I think you need lower voltage memory. So I'd get something 1.35v or lower.




___________________________________________________________________________________________________________________Lenovo Ideapad Y500 | IntelŽ Core? I7-3630M @2.4GHz | 8GB 1600MHz DDR3 RAM | NvidiaŽ Geforce? GT 750M | 120GB Mushkin Atlas Deluxe mSATA SSD | 1TB Samsung Spinpoint M8 5400RPM HDD | 1080p Lenovo Display | IntelŽ Dual Band Wireless-AC 7260

9 more replies
Answer Match 61.74%
A:Disk usage of my lenovo y510p always 100% ??? Plea...

that issue is related to windows 8 so i would recommend you upgrading windows 8 to 8.1 through windows store and it should stop the disk usage 100% and make it normal again

9 more replies
Answer Match 61.74%

So this morning I woke up like usual and start my laptop up. It took a while like usual to boot up then it went straight to the your computer needs restarting blue screen and I thought hmmm this happened a few times and usually gets fixed. This time it went not to the home lock screen but the trouble shooting blue screen after picking my language and type of keyboard. Then it goes to two options "advance options" or "shutdown" I go to advance settings then there were 3 more options. Refresh settings, reset settings or advance options so I chose refresh cause I didn't want my files to get erased since I haven't backed them up yet. I click refresh and a message says that my drive where Windows is installed is locked. And it told me to unlock it and try again. So how do I access this? I forced shutdown but the same thing happens for a few times. Now I'm worried about this problem. Can anyone help me before I actually have to reset my laptop?

More replies
Answer Match 61.74%

Good evening, I will keep this short, I have a Lenovo ideapad y510p with Windows 8.1 (I got it with 8.1, did not upgrade from 8) . I noticed a problem yesterday, where I cannot adjust the screen brightness. If I use the keyboard commands (Fn + Up and Fn + Down) The slider appears on the top left of the screen, as always, but does not ?slide? It stays static.  If I move the slider on the Setting menu, I can slide the value but the brightness does not change and the value is not reflected on the slider on the top left of the screen. I am not sure when this happened for the first time. 











Solved!
Go to Solution.

A:Lenovo y510p with Windows 8.1 brightness slider no...

Never mind, restored from last valid restore point and now it is working

2 more replies
Answer Match 61.74%

Hello, where i can get recovery media for my Lenovo Y510P laptop, when my recovery partition is damaged. Can anybody help me? Does anybody have original Recovery disc or someting, where i can install clean OS? If you can help me, please contact me. Its possiable that we can share media with Google Drive or someting. Thank You!Contact: Email: karlmartinpc@gmail.com  

A:Lenovo Ideapad Y510P: How to get recovery media?

If you mean the factory recovery files try Lenovo for a recovery disc set if available. If you mean for the OS alone just download the MEDIA CREATION TOOL from microsoft which you will use to download the OS installer. As to drivers go to the download site for your unit to download them.

3 more replies
Answer Match 61.74%

Hey y'all,I bought a driver caddy, this one:http://www.gearbest.com/hdd-ssd/pp_274547.html Also, i upgraded the internal HDD to an SSD and that works perfectly. The problem is the HDD in the caddy. Windows 10 won't recognize it in device manager and disc manager. Any help or ideas? Did i buy an incorrect caddy? Any help would be great!

More replies
Answer Match 61.74%

I never had this problem before until recently I noticed that my fan was making this loud buzzing noise. It was bearable at first. I thought that the fan might be dusty inside because I haven't cleaned it ever since I bought it. Last week, I tried to open the laptop so I can check why it is making that loud noise. I saw that the fan was dirty. I tried cleaning it. When I turned on my laptop, it was still making that loud buzzing noise. So I just ignored it. After a week, It suddenly got louder. It didn't sound normal anymore. I tried restarting the laptop but it still makes that noise. Its annoying. I took a video so you can hear what my fan is making.  It just keeps doing like this even if my laptop is just on stanby, like I'm not doing anything with it. This is what it sounds like when I did the Dust Removal tool on Energy Management.   Since I kept using the Dust Removal tool.. Now its making this weird noise, like the fan is getting stuck on something. I don't know what to do anymore. Its been 2 years since I bought this laptop so I don't have anymore warranty and I never had problems with my laptop except for today. I have never dropped it so I don't know why this is happening to my laptop. Please help me.   











Solved!
Go to Solution.

A:Lenovo Y510P fan making really loud noise.

Hi there, Xbelleh -
Thank you for writing in to the Lenovo Forum - happy to have you here today.
 
This video would leave me to believe that a piece of paper or other debris shifted inside and is now coming in contact with the fan blades.
 
When you use the dedusting cycle the debris is temporarily being blown out of the way of the blades.  What I would do is use a can of compressed air and blow out the fan assembly from both directions and see what is blown out.  Compress air is available at any office supply store, electronics store or big box discount store.  When using the compressed air use short bursts as an extended burst may damage the fan's bearings from over revving. 
 
Also, when using the laptop take note of its position.  If the fan is quiet on a flat surface, but is noisy when sitting at an angle like on your lap.  That might be a good indication that the fan bearings are failing. 
 
Worst case scenario is you need a fan replacement.  The fan is something that the owner can replace if you are comfortable working inside it.
 
As a do-it-yourself project it can be fixed in an afternoon. At this point I would try the compress air and we'll go from there.  
 
Update us how it goes.        
 
 
 
 
  
Regards,
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please ... Read more

6 more replies
Answer Match 61.74%

Hey everyone,
 
I bought a Lenovo Y510P laptop yesterday and it is extremely slow. It takes quite long to start up, simple tasks such as opening the control panel will freeze it for a about 30seconds. I haven't dared putting any demanding software on it (apart from Chrome and McAfee (paid subscription)).  My 6-year old Toshiba P300-17R is faster, which is completely ridiculous. I have no idea why it is this slow. Could anyone point me in the right direction for fixing this annoying problem? 
 
Lenovo Y510P-00303NL
8GB RAM, 4th gen Intel Core i7-4700MQ, NVIDIA GeForce GT 755M, 1TB HDD + it was running Windows 8, now updated to 8.1
 
Thanks so much!
 
(p.s. I wasn't sure in which sub category to put this and I thought it might be a Windows 8 problem - sorry if this is the wrong forum!)

A:Brandnew Lenovo Y510P extremely slow

Hi cultblonde, and welcome to Bleeping Computer.
 
You posted that you purchased the computer yesterday.  Is this a new computer under warranty?

3 more replies
Answer Match 61.74%

Hi, I've been having troubles with my laptop screen. Upon reopening my laptop from sleep mode, the screen remains black instead of loading up the login screen. I've plugged in an HDMI external monitor and it displays fine so I know it is the laptop screen. Also if I restart the laptop, the laptop screen works fine. I've tried updating graphics drivers and adjusting external monitor options (Win+P) but with no success. Any suggestions on what I should do? I've had this laptop for a while now and there is no valid warranty.Thank you

More replies
Answer Match 60.9%

Hello, I have been using a Lenovo Y510p since the beginning of 2014. It worked perfecly fine till a couple of weeks ago when it suddently turned-off while I was watching a video. From then onwards, it wouldn't start. Novo button or power cycling wouldn't help either. Since it is out of warranty, I took it to Geeksquad to see if they can diagonize the issue quickly but I was said the problem could be deep rooted and it needed thorough trouble shooting. I came home and started disassembling the unit part by part (Take out Hard Disk, Optical Drive, RAM, Wifi Card etc) to see if I could isolate the problem but the laptop simply wouldn't turn on. Suspecting that the mother board could be the problem, I purchased an used motherboard on ebay and swapped the existing one with this and assembled all the components back to their place. This time, when I power on, the keyboard would glow and I can see the heat dissipating fan spinning but it would spin for like 3-4 seconds and then it would stop and the laptop would power off. Then the laptop would start again, the fan starts spinning and stops after 4 seconds and this enters into a loop. All this while, the screen is totally black and doesn't display a thing. F9 or any other buttons are of no use. Novo button is of no use either. The laptop enters into the same loop with Novo button too. Would this mean that my CPU has given up on me? I request your kind help! Thanks,Shyam

More replies
Answer Match 60.9%

Hello, I only found out after purchasing the Y510P laptop that it for some strange reason does not support 5Ghz networks, only 2.4Ghz. This results in me having insanely slow connection every single night around peak hours (7-11pm), and I'm unable to do anything like watching movies, playing games or download stuff. Does anyone know exactly how to upgrade the wireless card on this laptop so it supports 5Ghz networks? Do I have to go out and buy another wireless card, or is it software upgrades like drivers only? I'm not a computer major so a walkthrough would be appreciated. Thanks.

More replies
Answer Match 60.9%

This has been an exhausting day! I've been trying to figure this out for quite awhile.

To start, I'll post some information.

My webcam was working fine yesterday! I tried doing a system reboot to the the week before that and alas the issue prevailed. My internal webcam is not being registered by my laptop!

So the solution that seemed obvious enough was to check my drivers, update them if necessary. Which I ended up doing. Alas, the issue prevailed.

Checking the device status, I received the error "Currently, this hardware device is not connected to the computer. (Code 45)

To fix this problem, reconnect this hardware device to the computer." The device is currently registered as 'Unknown device' as I uninstalled the driver. I was receiving the same error when I did have the original drivers though.
Looking up what the error means, it meant that the device was disconnected. I'm not entirely sure how this could happen though with an internal laptop. I also need to get a new copy of the drivers (Which don't seem to be registering the device upon installation).

Anyway any help would be appreciated as this has become a huge headache for me, and i just want to skype with my friend!
 

A:Need help with internal webcam drivers for Lenovo Ideapad y510p.

It might be that the webcam has failed if everything else has been tried.you can take it somewhere and have it looked at but im not even sure they can be fixed when they go. it might be cheaper just to get an external webcam such as a logitech.
 

1 more replies
Answer Match 60.9%

Hello.

I have a Lenovo IdeaPad Y510p and it has erratic BSOD behavior, usually after sleep mode, but not always. Would love to get to the bottom of it and appreciate any help you can provide!

I've attached the necessary file as per the BSOD posting instructions.

Thanks,
Alexander

A:BSOD on Lenovo IdeaPad Y510p, after sleep mode usually

Only 48 Windows Updates installed. Most systems have 60 to 80 or more. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Don't worry about the specific number, it's just important that you have checked and installed any updates that were available.

The memory dumps blame usbccgp.sys, but MSINFO32 lists ks.sys (kernel streaming of video driver)
And this seems to happen during a power down event (such as power off/hibernate/sleep/etc)

Finally, what applications do you delay using Startup Delayer?
What USB devices do you have connected?

I'm concerned about your version of Diskkeeper as it dates from Jan 2013 - well before Win8.1 was released.
Can you update it? If not, please uninstall it while we're troubleshooting.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

You may not find an update for this one, if so, just leave it be:
LhdX64.sys Mon Jan 11 10:06:58 2010 (4B4B3E92)
Lenovo HD Disk Driver
http://www.carrona.org/drivers/driver.php?id=LhdX64.sys

You should be able to find an update for this one:
tap0901.sys Thu Nov 24 13:50:27 2011 (4ECE91F3)
TAP-Win32 Adapter V9 or[br]OpenVPN driver or COMODO
http://www.carrona.org/drivers/driver.php?id=tap0901.... Read more

11 more replies
Answer Match 60.9%

Hi Guys,

This is something that has been bugging me for almost a year now and I've just been really lazy to solve the issue.

The problem is because for some reason, unknown to all except Lenovo, they decided NOT to support Windows 10 for a couple of the laptop models that they had in their product line when W10 was launched. Just my luck, my Lenovo Y510 (Model No - 20217) is among those unsupported PCs and hence there are certain features that no longer work.
(Laptops-and-netbooks :: IdeaPad-Y-Series-laptops :: IdeaPad-Y510p-Notebook :: 20217 - Lenovo Support (US) As you can see, nothing for W10)

PC Specs:
- Lenovo Y510P (Model No - 20217)
- 8GB RAM
- NVIDIA GeForce GT755M
- Windows 10 Home, Version - 1511
- Intel Core i7-4700MQ CPU @2.4GHz

The issue that I'm facing is that my Webcam just wont work. Issue that I can see:
- The light adjacent to the webcam on the laptop keeps coming on and going off and then finally just stay off (each time I try to use the camera)
- Skype and other applications that need my camera can no longer detect it. Initially, my video keeps on appearing and disappearing until it finally just goes and stay disconnected, as though I don't even have a camera.
- Error message on my Camera app when I try to open it: "We can't find your camera. Error code - 0xA00F4244(0xC00D36d5)
- When I go to my Device Manager, there is no list called "Imaging Devices" as a whole.

There are number of users who have faced this issue and there seems to... Read more

More replies
Answer Match 60.9%

I have a Lenovo 510p running windows 8.1. It did an automatic update after restarting it showed a BSOD for less than a second then went into startup repair. It said "Startup repair couldn't repair your PC" it had a spot to display a log file location but it was blank. When I tried to refresh it said "The drive where Windows is installed is locked. Unlock the drive and try again". Reset said "Unable to reset your PC. A required drive partition is missing". System restore said "To use system restore you must specify which Windows installation to restore." I only have one Windows installation. When I ran chkdsk it said (https://drive.google.com/file/d/0B24yfUwZYyCQRWtySHlyc2plNEk/view?usp=docslist_api) when I did chkdsk /f it said (https://drive.google.com/file/d/0B24yfUwZYyCQZHlQNFlFWmN2WGc/view?usp=docslist_api). I ran the Lenovo system restore and it restored back to factory settings, but still won't boot. If I connect the drive to another computer I'm able to see all the files but it won't boot on the other computer either.
Thanks in advance,
Branson

A:Lenovo Y510P Won't boot, Disk write protected

Hi Branson,
 
After restoring to factory settings do you see any error during the boot process?

11 more replies
Answer Match 60.9%

As I explained in another thread. When I attempt to boot into Safe Mode, only a black screen appears and rarely the safe mode background flashes for a second. I'm able to move my cursor around, but that's it. I do not understand why this is happening and what I can do to remedy this situation. I would appreciate any type of help. Thank you. 

A:Lenovo y510p Windows 8.1 Safe mode won't boot.

I'm wondering if the graphics adapter used on the computer is not compatible with the generic VGA drive Windows 8.1 uses for safe mode. Has the driver for the graphics adapter ever been updated? I noticed this on the specs. If you have the model with the two adapters, it's possible they conflict with the safe mode video driver. I saw a post where the computer had both an Intel and Nvidia adapter.
Dual (2x) NVIDIA® GeForce® GT755M 2GB (on select models) via Ultrabay
Single (1x) NVIDIA® GeForce® GT755M 2GB
I'm not sure it would make a difference but what happens when you disable Secure Boot and Fast Boot in BIOS. Does it let you access safe mode then?

4 more replies
Answer Match 60.9%

I have a lenovo ideapad y510p and everything was fine until for I thought I'd do the battery reset in the lenovo energy management,at first the battery was dead and laptop wouldnt turn on,,I found one way around this which is that first I take the battery out and then insert the ac adapter,the laptop turns on then I put it in hibernate while I insert battery after which it seems to charge but only after I do these steps,but if I take the adapter out and insert it back in,it would stop charging.this is all because of the lenovo energy management software battery reset.I've uninstalled it but it doesnt work.any suggestions?I'm guessing one of the steps after full charge during the battery reset the battery gets drained where it says "plugged in and not charging" until it reaches zero is the problem.

A:lenovo ideapad y510p ac adapter battery problems

 

8 more replies
Answer Match 60.9%

From about 3 weeks ago, my Lenovo Y510p (GT 750M Sli, purchased in 2013) started to make this weird grinding/buzzing sound at random times on the CPU side of the fan. It was barely noticeable if I had headphones on at first, but starting from the second week the noise and vibration of it grew louder. After doing some research for possible fixes, I have tried the method openining Energy Management and running the Dust Removal feature to temporary solve the problem. However, that method only worked for about a week, and starting from the third week the buzzing remains very consistent even after I run Dust Removal several times. Does anyone here know what is the problem exactly? I know for other models, people have been able to solve the problem by updating their BIO driver provided by the website. But all Y510p users seen to have that problem early enough to just get a refund or send it back for exchange/repairment using their then still active warranty. I would like to know if there's any way that I can fix this without having to spend money for the fix when it is proven it is the company side issue since even fresh new purchases of the same model ran into the same exact problem within days. 

A:Lenovo IdeaPad Y510P CPU side Buzzing Noise

Bump. (Not sure if we allowed to bump here, if not I apologize)

2 more replies
Answer Match 60.9%

Hi everyone, I've had a Lenovo Y510P with SLI 750m's for about 1 year and 3 months now. 2 weeks ago (around the time I upgraded to Windows 10). My laptop suddenly is unable to boot for the most part.When I press power, it hangs on the initial blank screen, with no logo pop-up. I have managed to get it to boot before, just simply by restarting over and over, but it's been 3 days and no luck now. It simply stays on a blank screen (no backlight), though the keyboard and power button light up. Here are the steps I've taken to troubleshoot:-> Removed battery, unplugged AC, performed "fleeting power removal" by holding the power button for 60 secs (have done this multiple times)-> Removed RAM, changed slots etc. When there is no RAM, the machine will continuously reboot-> Removed HDD, reseated-> Removed 2nd GPU. When the 2nd GPU is plugged in, the fan will try and spin every so often-> Unplugged connectors to wi-fi module-> Restarted many times-> Pressed the NOVO button, it simply brings it to the blank screen Any advice would be much appreciated. The laptop itself is in good condition, and has little physical ware. Unfortunately it's no longer under warranty, and I'm sure the cost of sending it in is quite high. 

A:Lenovo Y510P not booting, blank screen on startup

If you boot without the HDD, what happens?

5 more replies
Answer Match 60.48%

Hi,  My ~3 year old ideapad purchased from Newegg seems to have gone south. I have Windows 8.1 installed. Last night I shut it off to bring it to class and when I got to class and tried to boot up, it wouldn't finish starting up, would sit at the logo screen for about 30 seconds before shutting down and starting over. The fans power up like it is going to start. It repeats this loop indefinitely. I tried holding the reset button next to the charger port and still nothing.  Suggestions?  Thanks 

More replies
Answer Match 60.48%

I am currently running the 358.50 version of GeForce drivers, however there are newer ones available (361.43). For some reason when I tried updating, my system got really unstable and eventually blue screened with KERNEL_SECURITY_CHECK_FAILURE. When I rebooted it was fine, until I tried to use a graphics intensive application (Photoshop) that caused my laptop to switch from Intel HD to NVidia. My computer locked up and crashed again. I booted into safe mode and rolled back the driver, but I need to install that driver eventually as I use this laptop for gaming and Photoshop.

Maybe another driver needs to be updated? Maybe it's my Intel driver? I couldn't find any issues comparable to mine so I'm assuming there is a conflict I can't find. Thanks for any help you can give me, I don't know much about how drivers work.

A:NVIDIA Driver causes system instability and BSOD in Lenovo Y510P

Exact same thing has happened to me with a Lenovo Y410p. I did a Windows 10 update yesterday and updated my drivers including my Nvidia driver and since then I have gotten three KERNEL_SECURITY_CHECK_FAILURE BSOD when running graphic intensive applications like Photoshop or Illustrator. Today I did a fresh install of Windows to see if it fixed the problem and as soon as I tried launching a game I got the elusive orange screen of death with the same error.

0 more replies
Answer Match 60.48%

Hello, Last week i received my Y510P from a reseller here in Lithuania, and ran into a *slight* problem.When playing more demanding games (though i wouldnt call borderlands 2 a very demanding game), the screen freezes and the sound hangs. Occasionally the display would turn pitch black (sometimes the drivers just reset with screen backlight still on). I checked memory, sshd, cpus and main gpus for errors, but none were found. I have no idea how to test the ultrabay though... Temps are pretty high, but definetly not critical. CPU runs below 85c under load, main gpu runs at around 75c, only ultrabay runs hotter, but i've seen people saying that theirs run above 95c and it still works fine. Mine usually crashes when it reaches 91-93c. It reaches those temps in about 30-60 minutes, steadily heating up.  I tried removing and re inserting, but it didnt have any effect. Im stumped. Sorry for rambling on so long. I hope somebody can help me pinpoint the problem, and maybe help fix it. Thanks. System specs:Win 8.1 proIntel core I7 4700MQ 2.4ghzNvidia GT 755m SLI8GB ram1TB+8gb SSHDAll drivers are up to date. 

A:Lenovo Y510P 755m SLI ultrabay crashes nvidia serv...

It seems that re-pasting the ultrabay, and increasing TdrDealy to 8 fixed the problem, but i believe it's something more serious than that...

9 more replies
Answer Match 60.48%

Hey guys, I am having a weird problem with my Lenovo Y510P, there's a LVDS cable which connects the motherboard to the lcd. When I disconnect this cable, the system boots perfectly and I can see the desktop when connected over hdmi to TV. However when I connect it back, the laptop doesnt even POST, no lights, no fans, nothing. I am unable to find the source of this problem, is it the LCD that's dead or some component on the motherboard? A short somewhere? 

A:Lenovo Y510P doesnt POST when LVDS cable connected

My first guess would be a short in that cable since it probably gets flexed alot (if it is the one I am thinking of), and they are pretty cheap. NEW LVDS CABLE FOR LENOVO Y510P 1080P FHD LCD LVDS CABLE VIQY1 DC02001KT00https://www.aliexpress.com/item/NEW-VIQY1-DC02001KT00-LVDS-CABLE-FOR-LENOVO-Y510P-HD-1080P-FHD-LCD-L... Good Luck,

1 more replies
Answer Match 60.48%

Performed a regular windows update earlier tonight, and ever since my Y510P has been completely unable to detect any wireless networks. I've performed a system refresh, and tried updating my drivers but it still can't detect any wireless networks. The problem is likely not with my router as I'm able to connect to it with other devices. Thanks for your help

More replies
Answer Match 60.48%

Hi everyone - I have 2 issues with my y510p (it's a little less than a year old, so with the warranty coming up I figured I may want to get some second opinions).The first is that recently, say within the last month or so, it has developed the habit of rebooting for no discernible reason and with no warning.  It will just snap to a black screen instantly.I've done a full refrresh of my Windows 8. I've run all the validation tools I could think of (hard drive/mem/OS files/etc.) There's nothing particular evident in my event viewer except for this in my system errors:'The description for Event ID 0 from source GeneStor cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.If the event originated on another computer, the display information had to be saved with the event.The following information was included with the event:GeneStor driver startedGeneStor driver started (2)'I believe they are connected because before the crashes started to occur the Onekey Recovery application would start randomly opening multiple instances of itself.' As an addendum, it also appear that I am getting kernal-power event 41The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.---- The other issue which may or may not be related is with... Read more

A:Lenovo y510P - Random Reboot and Power Button Issu...

So as a heads up for anyone else that might be encountering either of these issues - I called support just now and I'm sending it off for repair.  Bit of a bummer since this is my work machine (thankfully I have my t500 from college still kicking around to use in the meantime). Tech support was really nice and quick. Didn't make me walk through the diagnostics/troubleshooting I'd already done which is refreshing. Hopefully this is just a fluke because apart from these issues I really like this machine (and as I said, my thinkpad is rock solid.)

4 more replies
Answer Match 55.02%

Hi I just did a clean Windows 10 install and I cannot get the hdmi (or the vga) output to work. I get no signal. I have the single Nvidia version.  I tried as many drivers I could find for the Intel and Nvidia graphics but no success at all.  Hard disk was replaced so I don't have the recovery partition and I don't have the recovery dvd set either. Would anyone that has hdmi output working on windows 10 please tell me what drivers are using?  Thanks

More replies
Answer Match 55.02%

So, I just noticed this and it has been going on for quite a while I think, the fan on the right side of my laptop is not working. My laptop is an ideapad y510p. The fan not working causes my gpu to go upwards of 75c and I have no clue how to cool it down or make the fan even work in the first place. Any help would be appreciated

More replies
Answer Match 55.02%

Hello, I bought a Y510P (SLI version) 2,5 years ago (yes, warranty is now expired) and my keyboard stopped working.Two rows of the keyboard didn't respond and after resetting and updating my laptop, contacting lenovo and I had to reset and update another time the problem was still there. Lenovo recommended a repair for my laptop. I declined it because I wanted to see if there were faster/cheaper/better options near my location. Next I searched for a local fast and cheap repair center to repair my laptop because my warranty was over so I had to pay anyway. I found one, send my laptop and a while later they told me it was the keyboard controller chip on the motherboard that was faulty. To repair that they had to replace the whole motherboard. Cost? Around 60% of my original purchase price. Way to much for a student. Went to Lenovo again with this information but of course they couldn't tell me more without a diagnose from their own but I don't want to spend another ?50 on a diagnose. This joke costs me a lot for just the diagnose, let alone the repair.  So my question, does anyone know something about these laptops and do you know if it could be this chip and can it be repaired/replaced instead of a whole motherboard? And, does anybody has experience with the cost of replacing a motherboard with Lenovo? Price in the Lenovo shop for a laptop is just over ?300,- and I don't want to get another offer to repair my laptop voor ?700.  It's sad... Read more

More replies
Answer Match 55.02%

Hello!
 
I want to know how to identify if the second graphics card is working on my Lenovo Y510P.
 
Each time a turn on something resource intensive, my left gpu is working like crazy with all the heat coming out, and the one on the right seems like not spinning, or spinning but very slowly, and almost no heat is coming out. 
 
Is it supposed to be like that?
 
Also, can't find Energy Management option to use 'Dust removal' feature.
 
I'm using Lenovo Y510P 750 SLI on Windows 10.
 
Cheers,
N
 
PS. I also want to mention that in NVIDIA Control Panel "SLI Configuration is set tp Maximize 3D Performance" and PhysX settings to Auto-Select. 
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.

A:Y510p - Identify if both fans are working

Correct me if I'm wrong but, I dont think GPU's spin, are you referring to the fan? If so, then one fan is for the CPU while the other is for the GPU, Intel GPU is integrated in the CPU while the dedicated GPU has its own fan.




Y50-70 i7-4720HQ - 16GB Ram - 1TB HDD Win 8.1 - 4GB-860 GTX

5 more replies
Answer Match 55.02%

Just realized my dvd drive does not play DVDs since I upgraded to win 10. It doesn't even recognize dvds, showing me only a desktop.ini file instead. It plays CDs just fine and it burns DVDs as storage device, though it **may** only be burning them as a CD, haven't really tested it. I would like to get an updated driver from lenovo, but I can't get past the Q&A session, it either doesn't know my laptop or thinks I'm running win 8.1 or 7. Any help would be appreciated. Thanks Mike

More replies
Answer Match 55.02%

Hi,  Just before im losing my mind i turn to you guys for help! A back story about the recent events that got me to the problem:My Lenovo Y510P crashed (couldnt boot to windows) a month ago and  needed an HDD replacment according to the tech lab (he is still under warranty). They replaced the HDD and installed  the Windows 8 (i had 10 before the crash) from the hidden parttition, when i got my laptop back, i updated to Windows 10 but it crashed on boot screen (just like it did before the HDD got replaced).I sent it back to the lab, this time they just restored it to Windows 8.I tried to update it to 10 and it got stuck on boot again.My laptop went back and forth 3 times like this until they just sent me the laptop with Windows 10 on it. They deleted my hidden parttition and my SSD (24GB) with the laptop backup data so now i cant restore or format and i dont have any drivers or configurations on the Windows 10.  So heres the problem- It works a lot slower then it used to! it also take 3 times more to boot!i tried to get all the drivers and searched for BIOS configurations and i found that im missing a progrem called ExpressCache.I downloaded it but i don't think it made a diffrence.Is ExpressCache my solution? Maybe i need to configure it?Here is a screenshot with some details of my ExpressCacheHelp me please! i can send it to the lab again but they will just format it...Thanks!  ? 

More replies
Answer Match 54.18%

I have been having serious issues with the 750M (non-SLI) on this laptop. It will not work at all. I have noticed this issue on both Windows 8.1 (factory image) and Windows 7 (fresh install). Device manager lists it as saying: Windows has stopped this device because it has reported problems. (Code 43). Disabling and re-enabling the device makes the screen flicker and nothing else. I have tried various driver version configurations (with a driver sweeper run each time) and NOTHING will get it to work on either OS so I am beginning to be convinced that this laptop is a POS and has had the 750M video card die. Attempting to play games clearly illustrates that the intel GPU is being used instead as there is very low FPS.DXDiag will not show the video card even if I disable the intel GPU.GPU-Z shows the video card, but you cant see anything about frequencies or fillrates, bandwidth, sensors etc.  

A:Y510P NVIDIA 750M not working (code 34)

Still nothing... Gonna send it back soon demanding a new one. In the meantime I must reccommend that people do not purchase the Y510p.
 
Link to picture
 
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

2 more replies
Answer Match 53.76%

I recently updated my Lenono Ideapad Y510P to Windows 10, and after a couple of weeks, I started having this wierd problem with my sound. For some reasons, I always had 2 sound outputs, 1 actually being my speaker, and the other being a random "fictional" speaker. However the fictional speaker was set as default to play some of programs, for an example Counter Strike, which resulted in me not being able to hear what was going on in CS. I tried to deactive the "fictional" speaker in the playback options, but for some reason I couldn't deactive it .. So of course, I uninstalled my drivers, and tried reinstalling. However, my big problem now is, I can't install the driver again. I tried both downloading the driver from your website, downloading the Realtek Audio Driver specifically for my computer (however it was for Windows 8.1, no newer version), and I tried downloading the driver from Realteks own website for Windows 10. Both did in fact start the installation, but after saying "You need to restart in order for the driver to work (or something like that)", nothing happened. I didn't have the driver, nor the Realtek program and worst of all, my sound still isen't working .. Is this a virus, or am I just missing something really important? I hope someone's able to help me! And i hope I posted this in the right forum, if not, someone please move it to the right one

More replies
Answer Match 53.76%

I recently updated my Lenono Ideapad Y510P to Windows 10, and after a couple of weeks, I started having this wierd problem with my sound. For some reasons, I always had 2 sound outputs, 1 actually being my speaker, and the other being a random "fictional" speaker. However the fictional speaker was set as default to play some of programs, for an example Counter Strike, which resulted in me not being able to hear what was going on in CS. I tried to deactive the "fictional" speaker in the playback options, but for some reason I couldn't deactive it .. So of course, I uninstalled my drivers, and tried reinstalling. However, my big problem now is, I can't install the driver again. I tried both downloading the driver from your website, downloading the Realtek Audio Driver specifically for my computer (however it was for Windows 8.1, no newer version), and I tried downloading the driver from Realteks own website for Windows 10. Both did in fact start the installation, but after saying "You need to restart in order for the driver to work (or something like that)", nothing happened. I didn't have the driver, nor the Realtek program and worst of all, my sound still isen't working .. Is this a virus, or am I just missing something really important? I hope someone's able to help me! And i hope I posted this in the right forum, if not, someone please move it to the right one

More replies
Answer Match 53.76%

I recently updated my Lenono Ideapad Y510P to Windows 10, and after a couple of weeks, I started having this wierd problem with my sound. For some reasons, I always had 2 sound outputs, 1 actually being my speaker, and the other being a random "fictional" speaker. However the fictional speaker was set as default to play some of programs, for an example Counter Strike, which resulted in me not being able to hear what was going on in CS. I tried to deactive the "fictional" speaker in the playback options, but for some reason I couldn't deactive it .. So of course, I uninstalled my drivers, and tried reinstalling. However, my big problem now is, I can't install the driver again. I tried both downloading the driver from your website, downloading the Realtek Audio Driver specifically for my computer (however it was for Windows 8.1, no newer version), and I tried downloading the driver from Realteks own website for Windows 10. Both did in fact start the installation, but after saying "You need to restart in order for the driver to work (or something like that)", nothing happened. I didn't have the driver, nor the Realtek program and worst of all, my sound still isen't working .. Is this a virus, or am I just missing something really important?
I hope someone's able to help me!

More replies
Answer Match 50.4%

Hello, I have a new T530 with Windows 8 OS. I am having trouble using the integrated camera. It functions neither in the Windows camera app nor in Skype. In both cases I get a picture with a gray background and a camera with a line through it. In Device manager, the camera does appear, is enabled, and the drivers are up to date.After looking through other threads, I tried checking whether the camera was plugged in and indeed it was. When using Skype and I set the camera to on (Skype did detect the camera), I still got the gray no camera image, but the green light on the camera itself turned on.I also tried using Fn+F6 to check settings. Lenovo settings opens, but the when I click the camera settings Icon, the screen loads a blank page that says "Camera" in the top right and has a back button (left pointing arrow) in the top left hand corner. The back button does not seem to work and I must change the window to something else in order to exit/close settings.I tried manually installing both camera drivers and "power management" ("energy management"?) drivers. Neither of this solved either of these issues.Please help me to resolve this problem. Thank you.

A:T530 Lenovo Integrated Camera not working, Lenovo ...

Hi, euterpenc
 
I would make sure that the BIOS is up to date in the system. The current BIOS for your system is 2.07 and can be found here. Also, I would ensure that the chipset drivers are up to date, and those can be found here.
 
Hope it helps, and let me know how it goes
Adam




______________________________________________________________________________________________________________Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

7 more replies
Answer Match 42%

My mic became suddenly not working 2 days ago. I have tried re-installing the driver (Conexant) and make sure my mic isn't muted, but still, it does not work. I have also checked the status of the mic in device manager, but it says the device is working properly and the latest driver had been installed. Does anyone know how to fix this problem? Or maybe my mic was busted physically? Specs:OS: Windows 10 (updated on December 2015)CPU: Intel Core i7 4510UGPU: Nvidia 840M 4GBRAM: 12GBStorage: 1TB Thanks for the help!

More replies
Answer Match 41.58%

I have everything up to date, and yesterday my scroll pad stopped working. The touch pad is fine, but the scroll part isn't scrolling.
 

A:Lenovo scroll pad not working

Is it possible that you 'updated' something with the wrong drivers? If this has happened since you did the updates I would suggest investigating this first.
 

1 more replies
Answer Match 41.58%

Hi,

I am running windows 10 in a new lenovo ideapad 305. none of the usb ports work and I have no idea why. Also the webcam is not working. Can you help? thank you.
 

A:new lenovo ideapad no usb working or web cam - help!

The Lenovo IdeaPad 305 laptop comes in AMD and Intel models and comes with Windows 8.1 64-bit.
Did you just recently upgrade it to Windows 10 64-bit?

---------------------------------------------------------------
 

2 more replies
Answer Match 41.58%

Hi, I just got my new Lenovo P50 a few days ago, and so far it was a great experience.The only thing that doesn't work is the HDMI connector. I understand the HDML is connected directly to the NVIDIA GPU. I assumed it will work when setting the BIOS to discrete graphics, but that didn't help as well.Steps I took  (The HDMI cable is, of course, connected, and "Project" settings (Fn F7 or Windows-P) is set to "extend")1) Update NVIDIA drivers2) Use NVIDIA drivers recommended by lenovo3) Reduce resolution to HD and Full HD (the projector I am connecting supports both resolutions)4) many many restarts  I have noticed another thing - In the BIOS there is a way to configue the device to which the boot screen will be sent to. The options are "ThinkPad Display", "DisplayPort" and "Display On Dock". But the documentation on the right side is also saying there SHOULD be an Option "HDMI". Which is not there. When looking into the NVIDIA native system information, it shows 1 native output (the laptop's screen) which is "connected". Other than that ttere are 3 (!) display ports, all 3 not connected (thou the projector is on, and the cable is connected). To me it seems like the HDMI port is disabled, but I can't find any way to enable it! Any help will be appreciated.  

A:Lenovo P50 - HDMI not working

RaananW wrote:The only thing that doesn't work is the HDMI connector. I understand the HDML is connected directly to the NVIDIA GPU. I assumed it will work when setting the BIOS to discrete graphics, but that didn't help as well.Steps I took  (The HDMI cable is, of course, connected, and "Project" settings (Fn F7 or Windows-P) is set to "extend")1) Update NVIDIA drivers2) Use NVIDIA drivers recommended by lenovo3) Reduce resolution to HD and Full HD (the projector I am connecting supports both resolutions)4) many many restarts   When looking into the NVIDIA native system information, it shows 1 native output (the laptop's screen) which is "connected". Other than that ttere are 3 (!) display ports, all 3 not connected (thou the projector is on, and the cable is connected). To me it seems like the HDMI port is disabled, but I can't find any way to enable it!   don't know about HDMI port, i have seen similar problem with the miniDisplayPort->HDMI display. i got it work in mirror mode (1920x1080) once when i first connect a monitor. the next time i connect, somehow it thinks there are 2 displays mirrored to the internal P530 graphics, but limited to 1280x720, cannot change that.  the external display (connected to the M2000) shows nothing. windows resolution, intel graphics control panel, nvidia control panel, none can fix it. the only way i got it to work is switch to extended, the internal shows 4K option again and the e... Read more

9 more replies
Answer Match 41.58%

Hi Team Here is case number 02399333 regarding the issue which am facing registered with lenovo.10 days back i called to lenovo ,as my laptop wasnt charging and they sent me duplicate adapter. Even after laptop didnt get charged. Right now am asking for replacement ,but nothing is heared from lenovo management team. As they simply raised case number and passing the days by saying its been looking after.Till now i didnt hear from lenovo and i lost hope that they will not answer me for an exchange as this is still in warranty.model : G50-45 Laptop 

More replies
Answer Match 41.58%

Okay, I recently bought this new zebronic ghost headset(http://bit.ly/1UeppF3). The headset is great but the only problem is that the mic doesn't pick up any sound(when I insert the mic cable/jack into my combo audio jack). The mic get recognised but doesn't pick up any sound, nd also my internal laptop mic works. So I tried it with my friend's headset and his mic didn't pick any sound either. Well then I tried using a Headset adapter(this one : http://amzn.to/1Uepclb), But the same results. Then I bought a usb Sound card(This one : http://amzn.to/1YtHoHC), didn't solve the issue either. I have searched everywhere for a solution but couldn't find it anywhere. The reason why I use a external mic is because my internal mic picks up too much noise. I have Tried the following :1.Updated all my Drivers.2.uninstalled my audio drivers and reinstalled them(Devive manager meathod)3.Tried inserting only the headset microphone cable in the audio jack4.Tried combinig the cable using a headset adapter and also using a usb sound card However when I select Agc(auto gain control) under custom tab in microphone properties it goes up half a level, but it still doesn't regonise any sound.  Also when I select listen through this device(in headset microphone properties), I hear a loud screeching noise(like rubbing sand paper together - static noise I guess), although this happens only when the micrphone volume is above 80%.  Please help me resolve this issue. Th... Read more

More replies
Answer Match 41.58%

Okay, I recently bought this new zebronic ghost headset(http://bit.ly/1UeppF3). The headset is great but the only problem is that the mic doesn't pick up any sound(when I insert the mic cable/jack into my combo audio jack). The mic get recognised but doesn't pick up any sound, nd also my internal laptop mic works. So I tried it with my friend's headset and his mic didn't pick any sound either. Well then I tried using a Headset adapter(this one : http://amzn.to/1Uepclb), But the same results. Then I bought a usb Sound card(This one : http://amzn.to/1YtHoHC), didn't solve the issue either. I have searched everywhere for a solution but couldn't find it anywhere. The reason why I use a external mic is because my internal mic picks up too much noise. I have Tried the following :1.Updated all my Drivers.2.uninstalled my audio drivers and reinstalled them(Devive manager meathod)3.Tried inserting only the headset microphone cable in the audio jack4.Tried combinig the cable using a headset adapter and also using a usb sound card However when I select Agc(auto gain control) under custom tab in microphone properties it goes up half a level, but it still doesn't regonise any sound.  Also when I select listen through this device(in headset microphone properties), I hear a loud screeching noise(like rubbing sand paper together - static noise I guess), although this happens only when the micrphone volume is above 80%.  Please help me resolve this issue. Th... Read more

A:My Headphone mic is not working in my Lenovo Y50-7...

Check Smart Audio (if not loaded in taskbar), you'll see it in control panel. Lenovo has its own master controls. There maybe another but it doesn't hit me (waiting for my morning coffee). 



T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Windows 7 Home Prem - 64bit w/8GBZ70-80 I7 - 5500U 16GB GB - 1TB HD Window 8.1 64bit FHD 17.3 inch Display, Nvidia G840 w/2GB memory






















SMaudio.jpg ?117 KB

1 more replies
Answer Match 41.58%

My P50 used to recognize my ASUS dispay.  Today, for no known reason, it no longer recognizes that there is an HDMI connection on either port.  Windows 10, 




Regards,Pete

A:Lenovo P50 - HDMI not working

P50/P70 Problems Master Thread 

4 more replies
Answer Match 41.58%

Hello.My keyboard in lenovo g70-70 is not working (some buttons not working ,in numeric side only 0 and 2 not working, while numbers above the keyboard only number 5 and 6 working).Can i fix it, or i have to buy another one.Thank you.

More replies
Answer Match 41.58%

My notebook is runnning Windows 10, and the touchpad has not been working well recently. I can use the touchpad to left click and select multiple items in the past, however this cannot be done now. The right click of the touchpad is not working too. I used to right click a link and select "open in new tab" in the past but now cannot. Either the left click or right click of the touchpad are not working well. I would be grateful if my problem can be fixed. Thank you!

More replies
Answer Match 41.58%

Hi, today my hdmi port stopped working. I used my 22" LG monitor every day until it stop working today. In the morning i unplugged the monitor because i needed to take the computer at the university. Back home a few hours later plugged everything and all seemed to work fine. Then i restarted my pc after an installation. At the startup the pc won't recognize the monitor. So i tried to connect to another monitor, still not working. Tested the hdmi cable with another pc and it's working perfectly. So had to be my hdmi. Unistalled both intel and nvidia card, reinstalled back, still not working. The only thing haven't tried yet is a clean installation (did the last one a week ago).Also i noticed that sometimes the image on the screen was "waving" like there was a bad contact with the cable but after 1 or 2 seconds back normally. Don't know if i had to wipe and reinstall all again or give up and send the pc to customer service for replacemante or repair. If someone had this problem and solved i appreciate every suggestion, thanks  EDIT: Forget to say that when i plug in the hdmi cable the regular blinking light of the screen stay on for 2 o 3 second, the appear a no input signal on the screen and start blinking again. Like the screen somehow see the input but can't display the image

More replies
Answer Match 41.58%

I have problems with fan. When I turn on my notebook fan start working after 5-10 minutes sometimes even not started and I can hear some weird sound like very fast clock ticking.  I tryed solve it with a lot of fan control programs but they didnt help me (they were working only for short time). Then I was reading some articles where people were talking about problems with win10 but I dont think It's my problem because I have win10 on this PC half year and problems started two weeks ago. I think problem is somwhere in new drivers but I didnt found out nothing on internet. Can someone help me solve this or give me tip where should I look problem for ? Thanks. (Sorry for my english, Im just started learning it)  

More replies
Answer Match 41.58%

Hi forum, my lenovo 2-14 has been lying around for about a year untouched. so i decided to dig it out my closet and open it up.when i powered it on the keyboard backlight would light up and then the laptop would reboot every 4 seconds. i opened it up to see if there was something wrong. everything looked ok. powered it on again, the fan would start spinning then it would reboot again. i removed the ram stick and try to power it on, now the laptop would power on with no reboot. i tried the ram stick on another laptop and it would run just fine. i tried the other slot on the lenovo but the outcome was the same, reboot every 4 seconds. tried different ram stick none would work. is there anything i can do to so it would boot, maybe the slots are faulty? i also resetted the bios but still the same

A:Lenovo 2-14 RAM Slots not working

https://www.youtube.com/watch?v=sZufRNJpobUhere is a video demonstrating it

1 more replies
Answer Match 41.58%

My usb ports worked fine but one time i restartded my computer they stopped working. When i plug anything in it doesn't do anything! And next to my lenovo easy camera and the USB xHCI drivers there is a yellow exclamation mark (in device manager). PLEASE HELP

A:USB ports not working Lenovo y50-70

Hi Focus,
 
Welcome to the Lenovo community!
This controller enables USB over wireless as part of the Intel (WiDi) Wireless Display function. The yellow bank (or warning) just started occurring in early 2013. 
 
The wireless display portion of the WiDi driver would still continue to work even with the yellow bang.
Lenovo Support Site has the Intel WiDi driver   which addressed the yellow exclamation mark issue. 
 
Let us know how you get on.
Regards,
Shashi
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

1 more replies
Answer Match 41.58%

Hi. Mi first post here.  I have a Lenovo G50-45 model 80E30181US.  Original configuration was W8.1 with 500 Gb HDD. I upgraded to W10 and 250 Gb SSD.  It worked fine for a few days but now, after using it for a while, it suddenly stops working, it kind of freezes, refusing to open or close programs, even refusing to shut down . Mouse moves, but doesn't work, no action when clicking to open or close a program. I shut it down using the on/off buttom, start it and everything goes well for a while, then problem repeats as described..  Latest installed programs were Google Chrome and Mozilla Firefox. I uninstalled them... same problem. Installled again...same thing.   I have not restored it because the protection was not activated. I just noticed in  "system protection configuration" that the two partitions of my SSD ( [C] [system] and [F] ) are shown as non protected (deactivated), but there is a third item,  "[C:] [Falta]" ,  showed as protected (active). Please note that Falta is spanish (the languaje I am using), which I guess in this case translates to "lacking"or "missing"... or "faulty/defective".... I find this very strange...  What could be the problem? What to do?ThanksIgnacio

More replies
Answer Match 41.58%

Hi All, Is there anyway in the bios of a p50 that I can change where an OS will be imaged? When I try to image a p50 using a UFD, seems that the laptop is regarding the UFD as a hdd and because its "removalable", MDT is not able to put an OS on there. Any suggestions on a possible fix for this? I am trying to image a new Lenovo p50 using my UFD. I have setup WDS and MDT. I tested from the network and I am able to image the laptop fine. I know the UFD is working because I imaged a t460 without any errors. However, I am stuck on this p50. Upon starting the image, I get a failed message saying:Disk(0) Can Not be Formatted in ZTIDiskPart.Possible Cause: Removal Drive, not an internal fixed drive. Failure 7712  

More replies