Tech Problem Aggregator

lenovo g580 20150 latest bios.

Q: lenovo g580 20150 latest bios.

hi, i just updated my windows 7 to windows 10. should i update my bios?i see no update for windows 10, the latest is only for windows 8.1.this is the current bios i am usingSMBIOSBIOSVersion5ECN39WW(V3.05)thanks

A: lenovo g580 20150 latest bios.

My rule of thumb with BIOS updates is "if it is not broke, do not try to fix it" because there is always an inherent risk that a BIOS update can fail, and if so, leave the system bricked (dead) requirnig a new motherboard, and there does not appear to be anything in the latest updates readme.txt other than specific fixes for Windows 8.1... So I would hold off. Summary of changes
==================
General Information:
Fixed:
1. Modified small number keys (such as the key U, I, O) matrix for win8. Cheers,

1 more replies
Answer Match 82.2%

Hi,
I would like to know if my laptop is compatible with Windows Vista SP1 x64.I tried to install it,but when i rebooted the first time,it gave me a blue screen.I can't even boot into Safe Mode,or Last Known Good Configuration.I know Vista SP1 is compatible with UEFI,right?

A:Lenovo G580 20150 compatibility

Do not worry about compatibility. You must meet the minimum requirements.
What is windows vista?
Scroll a bit down the page
Then click on Vista Premium
https://www.thomas-krenn.com/en/wiki...s_in_UEFI-mode

27 more replies
Answer Match 82.2%

Hi  Please tell me the maximum Size supported by Lenovo  G580 20150?. Thanks .

More replies
Answer Match 91.98%

Hi everyone,  I have Lenovo G580 (model 20150) and I bought new SSD Kingston HyperX Fury - 500MB Read/Write.I have done some benchmark tests and I have very slow Write speeds. AHCI mode enabled and SSD is connected to SATA III port. If anyone know what can be a problem, please write here.Btw Windows 10 clean installed on laptop, latest official ISO with Anniversary update included. Thanks! Other laptop specs:i7-3610QM8GB RAMHere is screenshot?

More replies
Answer Match 84.42%

Hello I have problem with bios update i have Windows 10 Pro 64bit (Installed yesterday) and i cant update bios because TDK error 255, i try run program on W7 64bit, W8 64bit and W10 Pro 64bit, but program doesnt run properly, so do you have any tips ? I was trying to run in Diagnostic mode, Safe boot etc..., but nothing happens.Another solution is Flash bios, but i am not Proffesional in bios, so i am worrying about crash my laptop, if i do it wrong my laptop will doesnt run, so i if you have any good guide how to do it right please help me.Thank for comment. Picture of error: http://imgur.com/AMZcV85 Specs from CPU-Z:CPU: http://imgur.com/a/3O3unMainboard: http://imgur.com/a/0I4m8 

More replies
Answer Match 83.58%

Hello, The Problem:Recently I installed Ubuntu 14.04.1 LTS  to my HDD in UEFI mode. Soon I found out that I could not access the BIOS using F2, but F12 allowed selection of boot device. Reinstalling Windows, I found out that the boot menu still had the Ubuntu entry and I still could not access the BIOS. I searched on the web for a solution and before I could manage to find a proper one, I managed to delete both the ubuntu and windows boot manager boot entries, still locked out of bios. This time I could not boot into any OS, could not access bios using f2 nor access boot menu using f12.  The Solution:There was one last hope, during boot I noticed that PXE (Boot via ethernet option was still showing).Note: This solution requires you to update the BIOS. This is a very risky procedure, so proceed with caution. This will also probably void your warranty. If you can access boot menu (F12) and want to regain access to the BIOS (F2), boot into Windows 7. Install a bios update for your laptop (specifically for your laptop) available at The Lenovo Support Site. The oldest BIOS (probably for Windows 7) is preffered. If you donot have access to windows 7, perform step 2 and boot into the created ISO by creating a bootable CD or pendrive. Then goto step 11.If you can't access F12 and F2, cannot boot into OS, but can boot via Ethernet (there should be a message about trying Atheros Ethernet PXE Boot during startup), start from step 1. Perform the following steps on a s... Read more

A:Lenovo G580 cannot access BIOS after installing Ub...

Update: Even in the newest BIOS Update 62cn97ww (for Lenovo G580), Ubuntu causes the same problem. I came across a solution on the internet, that works without having to update the BIOS if Ubuntu can be accessed. To fix it, boot into Ubuntu (should be installed on the system), start Terminal and type in the following commands:sudo grub-install
sudo efibootmgr -b 0 -BReboot and F2 should work. BIOS should be accessible through F12>Tab>Setup also. Ubuntu will boot no more but can probably be fixed.

8 more replies
Answer Match 82.74%

Please assist as I did the following steps to access the BIOS, it hangs:1. Shut down the computer2. Press the "Recovery Button" NOT THE POWER BUTTON (A small round button with curve arrow sign which is located on the left side of the Power Button just next to the dust removal opening on the left side of the laptop)3. Selected the BIOS Setup and nothing happens. I cannot even choose the boot option. If I put a pendrive with ubuntu, It picks it up, but not the Windows pendrive.My original HDD has bad sectors and cannot clone it. Any Ideas on how to help me?

More replies
Answer Match 82.74%

Hi

I got a new Lenovo G580 laptop which did not come with any pre-installed OS. I installed Ubuntu in UEFI mode (I had not disabled UEFI/Secure Boot). Later I installed Windows 7. During installation it asked me to format the entire format as it did not recognize the GPT partition. Accordingly without thinking twice I erased the entire HDD and installed Windows 7. Now I am unable to enter into BIOS

Things I have tried:
Tried with F2, F1 and Delete keys while booting
Tried removing the battery and booting while pressing the above keys individually
Tried removing the battery and adapter, held the power button for 1 minute
Tried removing the battery and held the power button for 1 minute while the adapter was plugged in
Tried pressing F12 and going to the APP MENU but I can only see "Diagnostic Splash" Nothing else and in that diagnostic splash screen I see that the System BIOS is "shadowed"
How can i gain access to BIOS so I can disable UEFI and install Win 7 and Ubuntu side by side
 

More replies
Answer Match 81.9%

Hi, I have lenovo G580 20157 laptop with windows 8 pro, i found a bios update 62cn97ww on support site but when i restarted my laptop and run the 62cn97ww update it just hangs and does not respond. kept ideal for long time to restart but no response. Any help on this?

A:Lenovo G580 20157 bios 62cn97ww update problem

hi adarsh_savant,
 
I think you may have concern in this thread,
http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/G580-Bios-update-problem/m-p/1199186/highlight...
 
Here the suggested solution from neokenchi that helped.
 
1. Boot into the BIOS by repeatedly tapping F2 on startup
 
2. In the BIOS, navigate to the Boot Tab and set UEFI to Disabled or Legacy then press F10 to save and exit. When
the computer reboots, check if you still get the errors and/or if you're able to boot into Windows.
 
3. If same problem, leave the changes that you made on Step 2 and attempt to re-install Windows via a Windows 8 recovery drive or OneKey Recovery button (note that this will wipe the computer to factory settings)
 
Hope this helps,
Cheers!



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 73.92%

Hi, There is problem with nvidia gpu not longer being detected by Windows or Lenovo diagnostics applet.Bios setting is on "switchable" GPUNvidia drivers installer reports ~"No compatible hardware found" also device manager not showing any ~"Compatible VGA display device" like it should in case of installed gpu without any dedicated drivers.Lenovo diagnostics says everything is ok.So if geforce is damaged laptop is working on intel 4000HD but there is no option to diagnose what happened to that illusive geforce? 

A:Lenovo 580g 20150 Nvidia635m No longer detected by...

Hi Utops,
 
Welcome to the Lenovo community!
 
As per the Lenovo update, your system G580 is not compatible with windows 10. Please click here for compatibility details.
 
Still you check your BIOS and make sure NVIDIA Optimus is turned off and that you've selected "Discreet graphics only" option?
 
Let us know how you get on.
Regards,
Shashi
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

1 more replies
Answer Match 73.5%

Greetings I flashed lenovo s10-3 with newest bios, downloded from lenovo site (on the site atomaticaly detected my nb model and serial number and after then I downloaded new bios), bios flashed successfully (I think so because I have see no error message, I can post log too), but after restart I get no screen (blank screen), only led blinks and fan starts, but no screen. Can you help me out? NB is out of warranty, I am sure I have not made mistake and I seen on forum there other people telling same problem after bios update. Is there some recovery procedure which I should try? Thx, best regards!



OS6.build_195_v1.1.9.2.ROW after ud Lenovo Beacon Version 1.7.1013.0, OS6.build_195_v1.1.10.2.ROW, latest OS6.build_195_v1.1.12.2.ROWLenovo IdeaPad s12Ion, Levovo G580, Lenovo B5400.....

A:Lenovo IdeaPad S10-3 no screen after latest bios u...

--- Log started: 05/13/16 16:07:14Initializing...Log file : C:\bios\2ACN37WW\PHLASH.LOGSettings file : C:\bios\2ACN37WW\PHLASH.INI (found)Executable : C:\bios\2ACN37WW\winphlash.exeVersion : 1.6.8.5 Build : WinPhlashDate : 5/16/2008Resource file : C:\bios\2ACN37WW\PHLASHLC.DLL (loaded)Help file : C:\bios\2ACN37WW\WINPHLASH.HLPApp name : Phoenix WinPhlashOS Information : Windows NT 6.2.9200 - supportedisNT_AUTHORITY_SYSTEM_account: Robo. => False.gVBL_Flag = False(0h). [05/13/16 16:07:47]Preparation stageProcessing parameters...Image file : C:\bios\2ACN37WW\BIOSFL5.wphBackup file : C:\bios\2ACN37WW\bios27WW.bakLoading new BIOS image file...Opening file C:\bios\2ACN37WW\BIOSFL5.wph...Allocating 1076766 bytes...Reading 32768 bytes from the file starting at 0...Reading 32768 bytes from the file starting at 32768......Process the next block:Block size : 65536( 10000)Block address : FFFF0000Block attributes : 0022Block image offset : 000F0000Calling driver to BEGIN current block processingRetry Count = 1Processing block 14BLOCK_ERASECalling driver to process attribute 02 starting at 0BLOCK_PROGCalling driver to process attribute 20 starting at 0Calling driver to process attribute 20 starting at 4000Calling driver to process attribute 20 starting at 8000Calling driver to process attribute 20 starting at C000Calling driver to END current block processingCalling driver to END flashStage completedClear CMOS checksumCleanup stageStage completedRestarting system...Shutting down t... Read more

1 more replies
Answer Match 71.82%

Hi I was just checking for the latest bios version for the G5oo. My current version is showing 78CN25WW (V2.03) I tried to check on the lenovo website but as it is rubbish,i made no progress. When i navigate through to support section it just returns a server error. Presumably lenovo are too busy promoting their new lines rather than looking after exisiting customers who are struggling to keep their past naff products running 

More replies
Answer Match 70.14%

My g580 ran out of battery while using it, and now it gets stuck on the lenovo logo. I tried a different hard drive which changed nothing, I've tested both hard drives on a different computer and they both work. However when I boot the laptop with no harddrive it will get past the logo go to a screen saying something about an unplugged cable then reset and get stuck on a blank screen.   If I plug in my windows recovery usb drive( and no harddrive) the the machine will boot normally and go to the windows installation screen. So any ideas on why a working harddrive would stop the system from booting? Also I've tried the whole taking out the battery unplugging it holding down the power key and then plugging it back in thing, did nothing. 

More replies
Answer Match 64.68%

Hello guys, i just bought a lenovo g580, and i am not happy with the fps I am getting. I want to play Counter Strike Global offensive.I want to ask what parts can i change on my laptop so i can get a bit better fps?So my parts are: i7 2620m witch is dual core with 4 threads on 2.7 ghz turbo boostIt also has 1x2gb ram and 1x4gb ram.Video is GForce 630m and 1 tb hard drive.CPU Socket is 988B rPGAI know I can upgrade ram and get an SSD . But can I change the processor and the video card? And also is it worth getting anymore than the 6 gb of RAM.Thank you. 

More replies
Answer Match 64.68%

Hello, I have an Lenovo G580 Celeron Dual core 1,8 Ghz, 2Gb DDR3, the pocessor is B830 I think.My question is what kind of processor should I upgrade from i3 series or i5 series?I have a list with a lot of models with socket G2 but I'm not sure if all are suitable.This is the list: http://www.cpu-upgrade.com/CPUs/Intel/Mobile_Celeron_Dual-Core/B830.html Can anybody help me? Thanks,

More replies
Answer Match 64.68%

I had G580 with Win10 updated from Win8. After disk replace to Samsung EVO 850 computer do not boot. Only LCD was turn on and it has silver color (background light only). When I put on it stock disk everythink run ok, but I can not access bios. Then I was remove BIOS battery to check if it will possible to access BIOS. From that moment is G580 black-screen, does not boot with stock HDD, do not install WIN10 from recovery DVD, restore button does not work, battery remove and turning on for resset does not working.. Nothig. Laptop turn ON but screen is black. Never happend this before with any laptop. I google and try almost every hint.

More replies
Answer Match 64.68%

Can i put this "Ultrabay Graphics Card GT750M or GT755M" in my g580 lenovo?

A:Lenovo g580 question

Hi Shadowraze , 
 
Welcome to the Community Forums.
 
Ultrabay swappable drive bay in the ThinkPad range of laptop computers and some of IdeaPad Y Series laptops. Graphics cards would not be recognized by the BIOS unlike y410p/y510p . 
 
Regards
 
 

1 more replies
Answer Match 64.68%
Answer Match 64.68%

I have a g580 with win 10 and ubuntu14. Problem started a day ago, i am unable to turn on the wifi in windows. The option is not even highlighted. Diagnostics told me that wireless connections are turned of so i tried FN +F5 but still no change . Drivers are uptodate. Everything is working fine on linux. Any solution.

More replies
Answer Match 64.68%

Can i put this "Ultrabay Graphics Card GT750M or GT755M" in my g580 lenovo?

More replies
Answer Match 64.68%

HiI have Lenovo G580(59337073) with Celeron B820.is it possible to upgrade the CPU to Intel core i3(i5) 3rd generation(Ivy Bridge)? thx 

A:Lenovo G580 CPU upgrade

Hi
 
Welcome to the community.
 
Please find below the supported Processor of your system, you can use any one of them.
 
3rd generation Intel Core i5-3210M 2nd generation Intel Core i3-2370M Intel Celeron B820 (1.60GHz, 2MB) 
 
Regards,
Sameer



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 64.68%

Hello, ive bought G580 2 years ago, but now is this type little low-end, so i need upgrade RAM and CPU for better, but i dont know which can i put in, my parameters from AIDA64:CPU: http://imgur.com/a/d5qiNCPUID:http://imgur.com/a/6cKA2MOTHERBOARD:http://imgur.com/a/L8dQLBIOS:http://imgur.com/a/WcaPQ North Bridge:CHIPSET1:http://imgur.com/a/eubRPCHIPSET2:http://imgur.com/a/aiEsk South Bridge: CHIPSET:http://imgur.com/a/CewhQ SPD:http://imgur.com/a/WT8fP If you need more i will send, just write me what.

More replies
Answer Match 63.84%

Hi, A small amount of water was spilt over the keyboard. It was promptly soaked up and computer worked fine for two hours. Some of the keys are no longer working (space, b, n and arrows). The computer is working fine and external keyboard is fine.Any ideas of how to get them working again? They have been removed and all looks dry. Thanks

More replies
Answer Match 63.84%

Hi
I have a Lenovo g580 with windows 7 home premium 64 bit, whenever it goes to sleep, in whatever way, I get a black screen telling me that windows did not shutdown successfully.

I have completed a system restore to factory settings and downloaded and installed all updates. I have also run all Lenovo diagnostics to no avail.

I have changed the settings in power options, the bios has no power option.

I would appreciate any help

Many thanks
 

A:Lenovo G580 Sleep Problem

6 more replies
Answer Match 63.84%

HelloI have a Lenovo G580 laptop with windows 7.I used it for about 2 years and 1 month ago my laptop diesthe laptop does not work and does not have any sign of electric. it does not work with the AC adaptor or with the battery, so the issue was in the motherboard, i bought a new motherboard and replaced the old one with the new (used), then the laptop back to  life againbut the problem is the laptop does not function with the battery, when I plugging the AC adaptor the charging lamp Lighting up and when I run the windows the battery indicator show (92% in charge) for hours and when i unplug the ac adaptor computer shuts down instantly.Please advise .Thank you !

More replies
Answer Match 63.84%

Hello every one today i was working normaly with my laptop g580 and the laptop turned off like when you unpluging the charger. I try to turn it with the charger/battery/both without any luck. No sign or light work . I make some solution like hard resset, pressing the button for 30s .... without any luck. Any sugesstion to fixing it even opening the laptop?

More replies
Answer Match 63.84%

Hello.

I have a Lenovo G580 with Windows 8. I have a weird problem with audio. If the default audio is set as internal speakers and I plug in my headphones the sound just keeps coming from the internal speakers. But if I set the headphones as default, I can switch between the speakers and headphones as I want and there is no problem if only I play music from my computer.

If I try to play something from my browser, however, the sound only comes from the internal speakers and connecting the headphones does nothing. Except (and this is where it gets weird) if I play something from my computer first using the headphones. Then I can play anything from the browser and hear it through the headphones as long as I don't plug them out. If I plug them out, the sound switches back to the internal speakers and trying to plug in the headphones again doesn't do anything. So I have to play something from my computer again with the headphones plugged in and then switch to my browser to again play everything through my headphones.

What's wrong with it? Any way to make it work as it should work?

A:Lenovo G580 audio problem

Hi lenny111, first question would be what make of audio chip and have you downloaded the latest 8.1 drivers?

10 more replies
Answer Match 63.84%

Hi.I have a G580 laptop, and its gets my gray hair :-) The keyboard is working very strange, the number keys dont work 1-2-3-4-5-6-7-8-9-0, the numlock is not working eighter, i have to enable capslock the write smalle letters, i cant log into windows because my password is with numbers, i have tried to clean my laptop twice, every time it come up with a windows default account wich i don know the password for, i cant boot up in safe mode because i dont have the right paasword. As you can see i am pretty stocked her.. Please Help....

More replies
Answer Match 63.84%

While charging my lenovo g580, for first couple of minutes it gets charged but after that it stars to toggle bw charging and not charging msg continuously.https://m.youtube.com/watch?v=MmYNPzxg0xoAbove link shows the problem

More replies
Answer Match 63.84%

I own a lenovo g580 20157 model laptop. I am facing issues like its heating up a lot while playing games.i started facing all this problems after i updated the bios to 62cn40ww. Now i face fps drops. the games i used to play on my laptop with old bios, now started lagging. I also can't find the old bios file on support page. kindly advice.

A:Lenovo G580 20157 Performance.

Hi Puneet,
 
Welcome to Lenovo Forums.
 
We are really sorry to hear about the issue you are facing.
 
Firstly, Check BIOS? Sometimes a BIOS has fan speed controls.
 
This is normal as the game is running and full GPU is utilized, if the temp increases more than normal.  I suggest you to use the Laptop by placing it on a flat surface for good ventilation.
 
Please go through the below link to understand about Safe Temperature range for CPU?
 

Click Here
Click Here

 
You can refer the below thread for BIOS downgrade
 
Click here
 
Hope this helps.
 
Regards,
Shashi Kumar
 
-------------------------------------------------------------------------------------------------------------------------------------------
Did someone help you today? Press the star on the left to thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

8 more replies
Answer Match 63.84%

I purchased a new lenovo G580 laptop last month(i5 -3210m and Windows 7 x64 home premium) and have had around 6-8 crashes.Havent installed any new software except Skype. The crashes initially mentioned only 'damageguardx64.sys' of Lenovo. However I am unable to find any fix for it. Can you pls help.

A:New Lenovo G580 BSOD error

Welcome aboard.

► First of all, uninstall McAfee. That's bad.

Code:
fffff880`09dbd268 fffff880`0106c97cUnable to load image \SystemRoot\system32\drivers\mfehidk.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfehidk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfehidk.sys
mfehidk+0x6c97c
It is McAfee Host Intrusion Detection Link Driver. Use Microsoft Security Essentials - Free Antivirus for Windows.

► A lot of Lenovo Bloatware are there, causing problems.
Damage Guard: Causing some damages here

Code:
BugCheck 19, {22, 0, 0, 0}

Unable to load image \SystemRoot\system32\DRIVERS\DamageGuardX64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for DamageGuardX64.sys
*** ERROR: Module load completed but symbols could not be loaded for DamageGuardX64.sys
Probably caused by : DamageGuardX64.sys ( DamageGuardX64+32b4a )

Followup: MachineOwner
Lenovo EE Boot Optimizer driver now:

Code:
fffff880`09dbd888 fffff880`0183d30fUnable to load image \SystemRoot\system32\drivers\fbfmon.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for fbfmon.sys
*** ERROR: Module load completed but symbols could not be loaded for fbfmon.sys
fbfmon+0x330f
Get rid of all those things. Follow the guide: http://www.sevenforums.com/tutorials/219576-clean-up-factory-bloatware.html

► Free up the startup.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. I... Read more

1 more replies
Answer Match 63.84%

 ?  ?  ? My Lenovo G580 says "Lenovo" and didnt want to startup. I had try really many tutorials, i ude this pc for my school and i really need it to works please help me guys???? 

More replies
Answer Match 63.84%

Hi
I have a Lenovo g580 with windows 7 home premium 64 bit, whenever it goes to sleep, in whatever way, I get a black screen telling me that windows did not shutdown successfully.
I have completed a system restore to factory settings and downloaded and installed all updates. I have also run all Lenovo diagnostics to no avail.
I have changed the settings in power options, the bios has no power option.
I would appreciate any help
Many thanks

More replies
Answer Match 63.84%

The error: Intel UNDI, PXE-2.1 (build 083)Copyright (C) 1997-2000 Intel Corporation For Atheros PCIE Ethernet Controller v2.1.0.9(08/12/11) Check cable connection..!PXE-M0F: Exiting Intel PXE ROM. Can anybody help me with this?

A:Lenovo G580 PXE-M0F: Exiting Intel PXE ROM.

Hi and welcome to the communityIf any removable disk such as flash pen drive is inserted, then please remove it. Then try the procedure below.If you are trying to boot from the hard disk, Then please press F12 at lenovo screen after pressing power on and select the hard disk as the temporary boot device. This is temporary. For permanent go to bios setup utility by pressing F2 or F1 and place hdd in the first place




Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

9 more replies
Answer Match 63.84%

Hi I've lost my antivirus on my laptop, any suggestions on what should I do?

A:lost protection on my G580 Lenovo

What do you mean by "lost" exactly? Did your license expire?

10 more replies
Answer Match 63.84%

Recently bought a new Lenovo G580 to replace my old decrepit Toshiba. It worked fine for a couple of days, but suddenly started BSOD-ing as I began to use the laptop more and more.

I have noticed it is more susceptible to BSOD-ing when I am running Bit Torrent. Although it seems to wait until it strikes, luring me into a false sense of security and then crippling me.

I ran BlueScreenView, as I have seen many people mention it on various forums, including this one, and the such and it gave me these results. Sorry if this is not the accepted way of throwing out these results, but I am unsure what I am doing.

093012-22042-01.dmp
30/09/2012 13:57:08
DRIVER_IRQL_NOT_LESS_OR_EQUAL
0x000000d1
00000000`00000028
00000000`00000002
00000000`00000000
fffff880`019ad6fd
NETIO.SYS
NETIO.SYS+106fd
x64
ntoskrnl.exe+7f1c0 C:\Windows\Minidump\093012-22042-01.dmp
2 15
7601
280,808

I have put it on here in its entirety but I dont really know what this is either. Download Dump file.txt from Sendspace.com - send big files the easy way

Posted on Reddit as well, but I have yet to receive any help there. :( Laptop keeps BSOD-ing. Think it may be torrent related. : techsupport

Pretty brain dead computer wise, so sorry if this is unreadable/invokes facepalms all round.

Any advice or help would be very much appreciated as I have no idea what I am doing. If all else fails I suppose I can send it back.

Thanks in advance.

A:Lenovo G580 repeated BSOD-ing

Hello,

Take a look at the following link and perform the requested steps.

This will give us more information to help diagnose your issue.

http://www.techsupportforum.com/foru...ta-452654.html

4 more replies
Answer Match 63.84%

Hey, I'm currently using a G580 Lenovo laptop.One day I played my laptop and supricely it just turned off, so I turned it on again and once I typed my password to access the PC it turned off again, so I got the battery out the PC and waited five minutes, after I got the battery back I pressed the power button and nothing happened, no lights, no noice, nothing, just not turning on. I tried to find my problem on the internet and I found a youtube video how to fix that: get your battery off with your charger, press the power button 1 minute, get back the charger into the pc and press the power button and ta-dam! It's working. Well no, I did everything and it didn't solve my problem. Any ideas?

More replies
Answer Match 63.42%

Hello. Can someone help me please. My lenovo G580 laptop is stuck on the lenovo splash screen and I do not know how to fix it.

More replies
Answer Match 63.42%

Hi there all, Recently I got a Lenovo G580 (2189).Because I need WiDi (wireless display) options I bought a Intel Centrino Advanced-N6230 wireless card. After installing this hardware an error showed up at the startup: error 1802 ... unauthorized etc etc. I did not know about Lenovo - Bios and whitelisting hardware. Anyway this simple question remains. Which Intel Wirelesscard can I use with this laptop in order to work properly.Cause I don't want to hack the bios Cheers,Marlon

A:Lenovo G580 replacing wirelesscard not succesful -...

Hello and welcome,
 
I'm more familiar with ThinkPads, so please double-check anything you read in this post...
 
The problem with the white list is that a wireless card has to have a Lenovo FRU number.  It isn't sufficient to be an Intel XYZ board, it has to be an XYZ with the firmware ( the PCI subsystem ID) modified for Lenovo.  Reputable vendors will list the FRU if the board will play nice with the white list.
 
Take a look at the hardware maintenance manual for the G580, page 102l.  It lists an Intel 6150NX with an FRU # of 20002543.
 
Lenovo G480, G485, G580, G585, G780 Hardware Maintenance Manual (English)
 
As I said, this isn't my field of expertise (if there is one...) but maybe this will at least get you started.
 
Z.
 
 

9 more replies
Answer Match 63.42%

Model: 20157/2689Lenovo G580Windows 7 and Ubuntu 14No wifi card detected in device manager and intel proset gives error driver not installed.?

More replies
Answer Match 63.42%

Hi all, I've run into an issue with my laptop  Lenovo G580 that has Windows 10 Enterprise 64. I am not able to read CDs and DVDs. When a DVD is inserted, "Choose what to do with removal devices" comes up. When I click that, the error message "E:\ is invalid drive" shows up. Please help. Thanks and regards,John

More replies
Answer Match 63.42%

i have worked with this laptop for over two and half years without any difficulties but now for over 5 months, when it shuts down or restarts, it powers up the system with power lights on but shows black screen. when i try to open it, the hard disk is always hot but still nothing. when i remove the CMOS battery and put it back, it takes like 5 minutes and it displays. i dont i understand the sickness need your help thank you.

A:Lenovo G580 laptop powersup the system but does no...

You need a tech to assess it. Impossible to troubleshoot without doing tests and observing.Eg. Fan - starts up, continues after boot up runningPower adapter voltage etc or other power issues. Air flow and likely more.




T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Windows 7 Home Prem - 64bit w/8GBZ70-80 I7 - 5500U 16GB GB - 1TB HD Window 8.1 64bit FHD 17.3 inch Display, Nvidia G840 w/2GB memory

4 more replies
Answer Match 63.42%

Hi all,is there a way to order new original sticker for Lenovo G580 (like this one on picture)?I have new, very good G580 laptop (model 20150) and I am very satisfied. I replaced the CPU and put the new i7 3610QM in it, 8GB of RAM and SSD. The only thing that tore and which bothers me is sticker. xDIf anyone from Lenovo can help me with this, I would be grateful.  

A:Lenovo G580 - where to order original sticker?

Hi Wind,
 
Welcome to Lenovo Forums.
 
It really feels something amazing when people are concerned about stickers more than issue. I can honestly say that i haven't tried it. However if you asked me to guess I would suggest you to contact the nearest service center for futher assistance.
 
Hope this helps. Let us know how you get on.
 
Regards,
Shashi Kumar
 
------------------------------------------------------------------------------------------------------------------------------------------------------
Did someone help you today? Press the star on the left to thank them with a Kudo! If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! 

2 more replies
Answer Match 63.42%

Hi,
My daughters laptop has me baffled. It started with a blank screen issue, which I solved with a system restore. (theres was nothing of importance on the hard drive) I did try taking the battery out and after replacing holding the start button for 30 seconds first.
All appeared fine untill I shut it down. There was a massive 186 windows updates to do, which was expected after rolling back so far...
The issue now is a I get this message on the screen "failure to configure updates, reverting changes. do not turn off you computer. I get stuck with this screen with no change, I even left it over night.
I haven't managed to find the safe boot option with this Win 8 machine, I tried the F8 key on start up but no joy.
Has anyone solved this problem before?
Thanks in advance
Marty

A:Lenovo G580 Win 8 laptop update issues

Did you revert back from windows 10?

1 more replies
Answer Match 63.42%

Hello,Recently I have reinstalled Windows 10 updated from 8.1 (where everything was OK) to clean Windows 10 installation (changed HDD to SSD).Everything is fine, except one single issue - integrated camera is not working.- Camera indicator is always on (white LED is always turned on)- There are NO imaging devices in Device Manager- In Device Manager is one warning - Unknown USB Device (Device Descriptor Request Failed), Location: Port_#0006.Hub_#0005, with status with error code 43. Is there any way to solve this problem? If you need any additional info, I am here to provide Thank you in advance!

More replies
Answer Match 63.42%

i have worked with this laptop for over two and half years without any difficulties but now for over 5 months, when it shuts down or restarts, it powers up the system with power lights on but shows black screen. when i try to open it, the hard disk is always hot but still nothing. when i remove the CMOS battery and put it back, it takes like 5 minutes and it displays. i dont i understand the sickness need your help thank you.

A:Lenovo G580 laptop powersup the system but does no...

You need a tech to assess it. Impossible to troubleshoot without doing tests and observing.Eg. Fan - starts up, continues after boot up runningPower adapter voltage etc or other power issues. Air flow and likely more.




T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Windows 7 Home Prem - 64bit w/8GBZ70-80 I7 - 5500U 16GB GB - 1TB HD Window 8.1 64bit FHD 17.3 inch Display, Nvidia G840 w/2GB memory

1 more replies
Answer Match 63.42%

Just started happening this week.   It's stuck at the boot screen "lenovo".   I tried many different methods like removing battery, holding power button to reset, etc.  The *only* way to get it to boot is the remove memory card, and put it back.  Then it will boot up fine.     It might then boot fine for the rest of the day.  But then the next day (or after being shutdown for a while), it happens again so i have to remove memory card, put it back, etc.  What could be the problem here ?  I tried both memory slots.  So i don't think it's particular to one slot.  

More replies
Answer Match 63.42%

Hi Team, I just bought Lenovo G580 laptop on 26 April 2013. It worked for few days well, but yesternight it suddenly trip to white screen. I made on/off several times, in/out the batteries but the white screen remains same after turn on the laptop. When i turn it on the screen goes white and it reamins constant.... Anybody have idea what problem it relates too ? What to do ? Please help guyz ?












Solved!

Go to Solution.

A:Lenovo G580 screen goes white display

hi sameerjha28,
Welcome to Lenovo Forums!
 
?
You can try doing this:
-Turn off the computer.
-Unplug AC Adapter and remove the battery.
- Hold the Power button Down for at least 10-15 seconds, Then try reconnecting the AC adapter only and leave the battery out, turn it ON and see if it will make any difference.
- If it powered on Try it with the battery and check if it would still turn on properly.
?
If the above steps did not work Try an external monitor and check if it works there.
 
I would suggest Contact Lenovo Technical Support for service if the steps above did not help.
 
?
Hope this helps,




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

4 more replies
Answer Match 63.42%

Hi All,
I am facing problem please help me out. Actually I forgot my Administrator password and I was using my system using Guest Account. But unfortunately today when I turn on my laptop to try recover the password, display turned into Blank and I hardly can see folders, Icon etc. I tried some with my own but does work thats why I need some expert advise. I have tried the following but didn't work

1. Reboot the system.
2. Opened in safe mode.
3. remove the battery and adapter after some time reboot. etc.

My laptop's configuration is given below :
Lenovo G580,Ci5 3RD/4GB/500GB/Windows 7 ultimate 64 bit.

Please let me know If you required any specific information.

Thanks in Advance
Shubh

A:Lenovo G580/i5/4GB blank screen on bootup

For password see option 4 or 5 - User Account - Reset Password in Windows 7

Can you be more specific about how it turned blank? A photograph will help tremendously. Screenshots and Files - Upload and Post in Seven Forums

5 more replies
Answer Match 62.58%

Hi,   I had upgraded my Lenovo G580 to windows 10. Everything working fine except dolby audio and touchpad scroll. Volume is too low when it is 100 and also touch pad scroll is not working. In previous version i have problem in wifi now it is working fine in windows 10. Kindly update the audio and touchpad drivers for windows 10 or give any suggestion to fix this problems.

A:Lenovo G580 windows 10 dolby driver and touch pad ...

Dear kathir26,
 
Thank You For Contacting Lenovo.
 
Kindly be informed that the Windows 10 Drivers For your machine model G580 arent released yet so you can follow up on our Website to find the driver needed once they are available.
 
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g580-no...
 
 



Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

9 more replies
Answer Match 62.58%

Hello All,
 
My Lenovo Laptop, Lenovo G580 Model 2189, was upgraded from Windows 8.1 to Windows 10. Up until then I had been using Lenovo Solutions Center (LSC) and the Backup utility within it.
 
Now post the upgrade the Backup option has disappeared from the LSC. I am running LSC Version 2.8. 
 
I upgraded to LSC 3.x after reading somewhere that I should do this if I have upgradred to Windows 10. Then the only option I got was the periodic hardware scan for problems. So I downgraded again to LSC 2.8.
 
Will LSC Backup work under Windows 10 ?
Is there a Windows 10 version of LSC I can download that does have the backup option ?
 
Thanks All
John.
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.
 

A:G580 - LSC Lenovo Solutions Center - Missing Backu...

Yes I have upgraded to LSC 3.3.002 and File Backup Utility has disappeared.

1 more replies
Answer Match 62.58%

hello
my problem is very confusing
every time i plug in a usb for android device it says it's not recognized by windows however the mobile or the tablet are charging via the USB but i cannot access the memory card
i tried installing intel USB driver , ADB driver but still no response
i use windows 8.1 last update was 3 days ago

A:android devices aren't recognized by my lenovo G580

Originally Posted by Zaref


hello
my problem is very confusing
every time i plug in a usb for android device it says it's not recognized by windows however the mobile or the tablet are charging via the USB but i cannot access the memory card
i tried installing intel USB driver , ADB driver but still no response
i use windows 8.1 last update was 3 days ago



Try Wondershare MobileGo free trial. After it installs the proper device drivers you should be good to go and under no obligation to buy.

[OFFICIAL] Wondershare MobileGo for Android: Android Manager

2 more replies
Answer Match 62.58%

Im not native english speaker, sry if u cant understand some parts. Ill try my best to make my message clear so eventual will come easier.

This problem occurs for quite some time, its rather calm since few weeks when I downloaded shitload of new drivers and some other lenovo stuff but might be just coincedence. Since this issue doesnt want to go away itself I have to do something about it. I can send it to Lenovo for free service anymore so Id like to ask some experts if theres something I can do to fix this issue.

Some info:
- occurs usually while typing or other stuff, but few times my laptop literally went nuts and flashed black screens few times a sec, no matter if i touched it or not

- its not overheating, i bought cooling pad and it didnt help much

- can happen just after turning laptop on and not happen during 10h+ session

Thank you in advance.

A:Screen randomly flashing black on Lenovo G580

Work through these Troubleshooting Steps for Windows 7 which will uncover most problems. Report back results as there may be other steps indicated.

Why did you install all of these other drivers? Did you already have performance problems or just create them?

Do you have a System Restore point still available before this problem began?

What else have you installed? Please post back as screenshot of Control Panel's Programs and Features after maximizing the page, using the Snipping Tool from Start Menu: Screenshots and Files - Upload and Post in Seven Forums - Windows 7 Forums

3 more replies
Answer Match 62.58%

I bought my Lenovo G580 more than 3 years ago, and it came with Windows 8.
For a certain reason, my coworker installed on it windows 7.
I tried to restore it to the original image by using the Novo OneKey Rescue button next to the power button... but unfortunately it didn't work... when i press the Novo button, four (4) choices appear on the screen:
- Normal Setup
- BIOS Setup
- Boot Menu
- System Recovery
When i press "System Recovery", windows 7 starts normally without recovering anything...
Is there any way to restore my Laptop to the original factory software???
Thank you in advance...
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 
 

























images.jpg ?12 KB

A:G580 - Lenovo OneKey Rescue button is not working ...

Your One Key Recovery (OKR) button is working, but most likely the recovery partition that contained the necessary files was removed or destroyed during the install of Windows 7.You have a couple of options:1. Contact Lenovo Support by phone, ask if the recovery DVD's are still available and purchase them, it is a reasonable price...2. Purchase the retail DVD of Windows (7, 8.1 or 10) and perform a fresh install.3. Pick a Linux version you like - download and burn to DVD, then install from media.I personally use Windows 10 Pro and Linux Mint (Dual Boot) on my G580 with no hardware issues in either OS... Really like some of the applications that Linux has, and the fact that it is completely free to use.Good luck.CB

3 more replies
Answer Match 62.58%

I noticed that new drivers were released for G580. The drivers (Lenovo Enegry Management Driver) canot install because when the installer starts up, it immediatelly closes. Do I have an issue somewhere? Windows 10 (1511, Build 10568.17)Lenovo G580 (20157)

A:Lenovo G580 Windows 10 ACPI Driver not installing?

hi acemod13,
 
I looked at the Lenovo Energy Management driver for Windows 10 and upon observing the installer behavior, it extract the ACPI driver files (58KB) to C:\ProgramData\Lenovo\ACPIDriver (this may explain why the installer closes right after extracting).
 
If you're seing an Unknown Device in the Device Manager with an ACPI hardware ID (see image below) then try to update the driver manually and point it to the C:\ProgramData\Lenovo\ACPIDriver folder
 - Sample image
 
If you're unable to see the driver files, I've uploaded them here.
 
 
Let me know how it goes.
 
Regards

2 more replies
Answer Match 62.16%

I bought laptop 4 years before and it was good experience no maintannce cost or no issue till the date, but suddenly it stopped working. When I took the laptop to near by service centre they dismantled and tested the components and they are asked me to change a new mother board , really I could not understand what is the problem. How much will be costed , if I take my laptop to near by lenovo service centre ? May I know the maximum consuling charge , and I am just expecting everything should be fixed in front of me ?( place : India, chennai, sholinganallur ) 

More replies
Answer Match 62.16%

Hey All,
I have a LENOVO G580 2689 Laptop. It has:

Intel Core i3 2.40GHz (i3-3110M)
DDR3 (4GB)
No hard drive
Windows 8 sticker.
I would like to install a 1TG Hard drive. Which hard drive is compatiable with this laptop? Also it has a Windows 8 sticker underneath the laptop but the Windows 8 serial key is not present. Where can I find the licence key for this machine? Are they stored in the BIOS/motherboard?
 
Thank you in advance! :-)

A:Which hard drive to install on a LENOVO G580 2689 Laptop?

Try this for the HDD: http://www.amazon.com/Laptop-Hard-Drive-Lenovo-G580/dp/B00M4OGZQI. As for the windows 8 serial key, I don't know. My lenovo Y410p doesn't have the serial key on it, but I had no problems installing windows 8.1.

3 more replies
Answer Match 62.16%

My Lenovo g580 webcam is not opening as in device manager its showing yellow Exclamation on driver which says that: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)Please help as i had many things but its not helping.Do suggest.

More replies
Answer Match 61.74%

Greetings!

I have Acer Aspire 5750G. My current BIOS version is 1.07. The latest version is 1.12.

There are a few versions in between. Should I do incremental updates and reach 1.12 or should I just go direct to 1.12?

Many Thanks!

A:BIOS - Incremental updates to latest vrsn or direct update to latest?

Bios updates are cumulative, so you only need the latest.

You also don't need to update the bios unless there is a fix in it/them that fixes an issue you may be having. For the most part updating the bios is as easy as updating a driver, only if a bios update goes wrong you can't roll back to the old and you basically end up with a nice paperweight.

2 more replies
Answer Match 60.9%

So I bought a new CPU for my old G580 laptop. I wanted to upgrade from the B960 it has right now (it's the 20150 model). The new CPU is a i5-3320M as it's listed as a compatible part on both the downloadable PDF and the PartsLookup website (I checked with my serial number as well). I changed the CPU, installed thermal paste, everything, but to no avail. Won't even enter BIOS. The "on" LED flashes for 10 seconds, then it shuts down. Installed the old CPU again - it boots without problems. New CPU again - no BIOS, nothing. I have updated my BIOS to the latest possible version (version 5ECN96WW (V9.01), as the newer version shows a "Error 255 - TDK Library Initialization Failed". I just don't know what to do anymore. Could be a faulty CPU, but I doubt it. The only difference is that the old CPU is Sandy Bridge, and the new is Ivy Bridge. But it's shown as "compatible" with the laptop everywhere. It's a shame really...

More replies
Answer Match 60.48%

A friend had a malware attack, a beeping error on Chrome about a Windows Defender error running Win 10. She managed to shut down Chrome and then shut off her computer. She tried turn back on, but it would not. I managed to start the computer by removing battery , AC power and the bios battery. The only way to turn on is to remove all of the above and then reinsert bios battery and connect AC power. The keyboard does not work properly, types mostly 6s and a few other characters (ie the shift key types an 's'). No wifi, no CD, no mouse touchpad. I can get into Windows 8, which I restored from factory partiton. Did not affect the operation. I assumed that the bios must have been over written, so I downloaded an update, but it will not install. Program goes through the motions, but the old bios is still there. I am using an external USB KB and mouse. I still can not get into the bios. Is there a way to "force" a bios update?

More replies
Answer Match 56.28%

this is what it looks like! please help me I am in trouble. I tried looking at other people's questions about this but none of the answers seem to help me and it always redirects me back to this same screen.please tell me what to do!
 

A:Lenovo g580 opens at boot menu/app menu screen help!!

and it won't let me exit either!
 

3 more replies
Answer Match 56.28%

Hello. I have a Lenovo G580 Notebook with Windows 10 installed. The issue is that the Windows hotkeys, that is Windows key and other letter combinations, aren't working. For example, normally, if I press Windows key + I, then the Settings app should open up or if I press Windows key + R, then Run should open up. But the Start screen opens up instead in all such cases.

This is happening since I have updated the Synaptics touchpad driver via Windows Update. If I uninstall the driver, then the hotkeys start working again. But as soon as I install the driver, they stop working. This was not happening with Windows 10 before, even when the Synaptics driver was installed. It has suddenly started happening couple of months ago. Also I cannot completely uninstall the Synaptics driver because my laptop came with it itself nor can I stop the driver from updating as it is an important driver and it needs to be updated to be compatible with Windows 10.

Any suggestions? Thanks in advance.

A:Windows hotkeys not working on Lenovo G580 Notebook (Windows 10).

If you PM me your email address I will send you a link to the Synaptics driver that works for me. Then you will have to use the HideUpdate hotfix to keep Windows update from changing it.

0 more replies
Answer Match 52.92%

Hi, I just updated my Lenovo solution center to the latest version (3.3.02), but I could not find the install latest drivers/utilities sections as the old solution center. Can anyone tell me where to update the drivers and stuff in the new solution center? thanks

A:Lenovo solution center 3.3 where to install latest...

LSC version 2.8.007 will update to 3.3.002.LSC version 3.2.004 will update to 3.3.002. 3.3.002 is Hardware scan only and shows warranty info and other items.This version will not launch under companion at this time.Lenovo is upgrading all users of both versions to the 3.3.002 version. Previously the 3.xx.xx version was win10 only.==If you had 2.8.007 installed, LSC did not do updates!. It launched System Update. Go to your support page and download System Update, if it is not installed.  System Update is probably installed on your system, but you have no entry on the start menu. SU is found here: c\programfiles(x86)\Lenovo\systemupdate\TVsu.exe .==For win 10 users, you can also run the SU offering via Companion. 3.3.002 will not launch under Companion 3.44.0.0 (at this time. covered in another post in the apps section).  3.2.004 will launch.

1 more replies
Answer Match 52.92%

I cannot install the following updates to my machine no matter what I do: Energy Manager and Flight Mode Driver for Windows 10 (64-bit) - Notebook Advanced Configuration and Power Management Interface (ACPI) Driver for Windows 10 (32-bit, 64-bit) ... Lenovo Yoga Mode Control for Windows 8.1 (32-bit, 64-bit), Windows 10 (32-bit, 64-bit) - Notebook I have attached the following Zip containing the most recent DMPs and my systems current configuration as detected by MSInfo and AIDA64.

























MiniDump&MSInfo&AIDA64Report.zip ?592 KB

More replies
Answer Match 52.5%

maybe an extremely basic question, I noticed that if I go to Lenovo Support and scan my P50 for needed updates, nothing comes up in things to be updated. but if I manually check in the same website, it seems there is a new video driver 10.18.13.5488, while device manager tells me I have the 10.18.13.5445. should I refresh manually or is lenovo auto-detect implicitly steering me away from a problematic update? I have the M2000M 4GB card. screenshot: meant to show Scan Complete shows nothing, but first item in the list is a video driver that I dont have installed.

























Capture.PNG ?129 KB

More replies
Answer Match 52.08%

Hello everyone! I ama new user and i am coming up with this post as I couldn`t find any kind of solution for my problem.Recently I decided to do a reinstallation of my operating system, which also previously was Windows 7 Ultimate (x64). The installation went as usual, and after finishing it I went on to install all the latest drivers from the Lenovo site, for my product. When getting close to installing almost all the drivers i`ve needed, i stumbled upon a new version of the BIOS amnd the drivers and sfotware recommended for my laptop, by the producer. So i proceeded to install the upgrade, restarted the computer when it prompted me to do so, but after the so-called restart the laptop did not boot up as usual. At first it was telling me to not do anything as the BIOS is being flashed and then it was telling me something about some sort of image processing, things that i did not understand at the time (i have never encountered anything like that). After that my screen turned black. I have not done anything for a few couple of minutes as i thought it was supposed to be like that, but then i just force shut it down and unplugged the AC adapter. When trying to boot it all up again, the only thing i got was a black screen and nothing else.After doing a little bit of research it appears that, somehowm i`ve managed to corrupt the bios on my laptop or something, and nothing else would work at this point. I tried to remove the BIOS battery and the ram and then put them all back, trye... Read more

More replies
Answer Match 51.66%

Today, I updated my Realtek Audio Driver to version 6.0.1.7831 (dated 7/21/2016). After installation, I immediately realized that the taskbar icon changed from Dolby to Realtek default icon:? -> ? Next, I went to Programs and Features and found out that "Dolby Audio X2 Windows APP" disappeared from the list. Originally, both of these Dolby programs came with the laptop:? After the update, I was only left with this:? The impact of this is that I can no longer toggle the different sound features provided by the Dolby App. I contacted Lenovo via online chat support but the personnel insists Dolby is not a supported program by Lenovo without giving me a valid solution or answer. Did Lenovo omit Dolby App in the latest Audio Driver by mistake? Or did Lenovo intentionally removed it due to the vulnerability explained here: "Dolby Audio X2 (DAX2) privilege escalation" https://support.lenovo.com/sg/en/product_security/len_4884#/IdeaPad. If anybody is facing the same issue / has any solutions / answers, kindly leave a comment below. Thank you.

More replies
Answer Match 51.24%

Hi,My Lenovo laptop K2450 wont boot up and always in blackscreen (no boot, no bios, no lenovo logo or anything just blackscreen) when im turn on the power, this happen after im changing some config in BIOS (but tottally forgot what changed). Everything work fine except fan is off after 3 second. Already tried to reset BIOS but nothing happen, then my technician say that my BIOS is corrupt and i need back up for that. Anyone here got BIOS backup for Lenovo K2450? thanks for help.

More replies
Answer Match 50.82%

I run linux on my laptopdmidecode says  Version: 68SOU Ver. F.40  Release Date: 03/13/2013 When I go to HP site, for this laptop 2560p, the latest BIOS isF.20 Rev.24 Oct 2011 since this is 68SOU model, the latest BIOS elsewhere (http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_146857_1) says the BIOS is F.60 !!! 1) Which BIOS am I supposed to use ? The one running in my system is F.40 which is newer than the one in the HP site. I am having some issues with UEFI boot (the boot works but the screen is blank during boot).Which BIOS am I supposed to use ? 2) Also users with knowledge on this laptop, could you tell me please if this laptop supports BIOS fallback in case of a BIOS update failure ?  Thanks  

A:which BIOS is latest

HP-2760p This is the WINDOWS bios. Type:BIOSVersion:F.62 Rev.A(3 Jun 2016)Operating System(s):Microsoft Windows 7 Enterprise (64-bit) http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5071202&swItemId=ob_167641_1&swEnvOid=406... This is the LINUX bios. Type:BIOSVersion:F.21 Rev.(24 Oct 2011)Operating System(s):Linux http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5071202&swItemId=ob_99236_2&swEnvOid=2020 REO

1 more replies
Answer Match 50.82%

Is it bricked?Last night my computer did its normal thing and shut down after being ~10% charged, but when I went to plug it in, & restart it it hung up on the splash screen for a while. I thought it was just extremely dead, so I turned it off again and let it charge for ~15 min, and when I turned it on for a 2nd time it lagged on the splash screen again, so I started button smashing. none of the F1-F12 keys did anything, but after I hit CTRL+ALT+DELETE the screne turned on and off & then I hit esc and it magically it booted up again. The next morning it worked fine, until I unplugged it and used it until it did its thing again and shut down at ~10% charged how I like it. And then it hung up again no F1-F12 keys do anything, the one touch recovery key just turns it on with the splash screen still stuck, and CTRL+ALT+DELETE makes the splash screne turn on and off for a second. If I leave it on it will stay on the splash screne indefinitly or until it dies, I've let it charge and discharge a few times and that changes nothing.   Some stats: Model: G580 20150 64 bit                             OS: windows 10 upgraded from 8 (unsupported I know)                 Processor: core i5 I've gathered it's either bios issue or a hdd issue, but all the form posts here are for windows 7, so I can't really go by that. Everything else on my ... Read more

A:G 580 20150 stuck on splash screen (windows 10)

The Li Polymer battery that is inside your main "battery case" is managed by a small electronics board or "smart" board that regulates power drain and charge to optimize battery run time and life span.  Running it flat then recharging is not a bad idea, but run battery diagnostics from the Lenovo Energy Manager and see if it needs to be replaced.
 
Windows 10 is still a bit buggy in many ways, so this may be the result of a driver or other software hanging up at boot time and not really based on hardware issues.  Try updating drivers, check BIOS settings and run diagnostics, then report back with findings.
 
Good luck.
 
CB

1 more replies
Answer Match 50.4%

Clarification, please! I've been told on this forum that I should upgrade the BIOS for my Pavilion g6-1d21dx to version F.48, which seems to be the latest one available on the product page. However, the BIOS currently on my machine is version F.49. Wouldn't F.49 be newer than F.48? Can anyone explain the discrepancy and tell me if there are any meaningful differences between the two BIOS versions?

More replies
Answer Match 50.4%

With the latest bios XPS_9550_1.2.10.exe, my laptop gets a problem, on brigtness lower than 50% brightness goes up and down for a halfsecond, and in windows brightness level is the same on two lower positions. Same thing with brightness flicker when im in bios(not a windows bug)

Downgraded bios and problem gone my service tag(DQYN562)

More replies
Answer Match 50.4%

Hi there,

This is something I've seen for the first time: latest BIOS version (that, by chance, I use) disappears from site.

A few months ago I updated the BIOS (HP Insyde) to the latest version: site mentioned this is version F.26 and all went well.
Checked BIOS and System Info: yep is F.26 alright.
I have it backuped. Was released in April - May.

There are no issues at all so far but HP seems to have reverted back to version F.24 as the latest one on the website.
I don't think it's possible to revert back the update because it was mentioned in the change-log but to me this version is stable.

This is the same site and laptop model.
Notice sp60606 for F.24 while the F.26 is called sp61457...

I wonder why they removed it...
Any ideas on this one? Anyone else seen this or similar on their machines?

Well, since all functions normally I'll keep this F.26 version and check their site regularly just in case.

Thanks

A:BIOS latest version

Maybe they pulled it because of this discovered issue when certain hardware configurations were trying (unsuccessfully) to update to F.26:

Envy DV6-7300ea Bios Update Issue with SSD - HP Support Forum - 2569477

8 more replies
Answer Match 50.4%

My bios version is J01 V02.24 When I check on the HP bios downloads I see there is a v02.29 available. But when I try to download and install the install assistant says it may not have installed, try again. When I try again, I dont get a message at all. But if I check system bios is still shows v02.24 I dont understand how to flash the bios and am apprehensive about messing the bios up. Is there a utility that checks and updates or any other way for the novice to upgrade bios without blowing the computer up? Appeciate any help or advice on this. Below is my system bios settings, if that helps any. 

More replies
Answer Match 50.4%

I flashed my bios to try to fix a problem with the display backlight.  I think I flashed the wrong file (i.e. for a different model computer), and now my computer will not recognise any boot media.  So I am trying to recover using the method posted here.  My question is, I got the most recent bios flash from the HP support webpage, but it is a .exe file (sp70486.exe).  The recovery method requires the actual ROM.  How can I either get the ROM out of the .exe file, or where can I download the ROM? PS the Pavilion 23-F269 has a AAHD3-AT motherboard. Or should I just buy a new BIOS chip from ebay?

A:Getting the latest BIOS ROM file

Hi I downloaded sp70486.exe and opened it with 7 zip. 3 files inside. The batch file called 'flash.bat' contains the following. mountvol z: /sdel z:\efi\hp\bios\current\*.bincopy .\AK2_8011.bin z:\efi\hp\bios\currentmountvol z: /dsafuwin AK2_8011.bin /p /b /n /r /k /reboot  Also in the zip file are 2 files "safuwin.exe" and "AK2_8011.bin", so I copied the .bin into another directory so it could be used elsewhere. I hope this helps, obviously I cant run or attach such files here, but I believe you can achieve what you want quite easily.  =======================================================================DetailsThis package provides an update to the HP Consumer Desktop PC BIOSUpdate (ROM Family 2AF8) for the supported desktop models andsupported operating systems.Details:-  This package provides an update to the HP Consumer Desktop PC BIOS (ROM Family 2AF8) for supported models running a supported operating system File name: sp70486.exe   Release details  Released: Jan 26, 2015  Version 80.11 Rev.AFix and enhancementsImproved security of UEFI code and variables. HP strongly recommends promptly transitioning to these updated BIOS versions.** After this BIOS update has been installed, previous BIOS versions cannot be reinstalled.  




Happy 2 [email protected]

1 more replies
Answer Match 50.4%

GIGABYTE - Motherboard - Socket 1155 - GA-P61-S3 (rev. 2.0)

Ive managed to update/flash (its the same thing?) my bios from F5 to F7 version within an utility provided by motherboard manufacturer called @BIOS ( you can find it on the same support and download section ). I had 3 options to update: from server, file or drive and I choosed the 1st one. The latest F8 version is no longer BETA but I couldnt upgrade to it at least not from server and I think I really need this since its more than half an year ahead of the previous.

However I downloaded the F8 files from manufacturer page , unpacked them and I had 3 files : one windows BATCH file "autoexec"
one aplication "Efiflash" and the F8 file p62s3.f8( I guess I need to put it on a flash drive ) .While atempting to run the 1st one I got the unsupported 16-bit aplication, with Efiflash something similar " this app cant run on this pc" message from windows 8.
So should I put them on a flash drive and then from bios menu to enter Q-flash and select update from drive or maybe doing the same witht hat utility I mentioned above? I have a Sandisk cruzer blade 16 gb.Is this good for this operation?

A:Cant upgrade to the latest BIOS

efiflash is a DOS utility. You'd want to prepare a bootable DOS USB drive and run it from that.

I'm not familiar with Qflash, but if it's equivalent to Asus' EZ Flash, that would be the simpler way to do it. I wonder whether you'd need to add the right file extension to the actual BIOS file. (For most Asus boards, the extension is .rom, but for some it's .cap.)

I'd suggest that that you read the manual, but I don't see anything about BIOS updates in the downloadable version. Shame.

3 more replies
Answer Match 49.98%

To all with an 860-019 desktop. Don't install the latest bios update. Mine would not install update. Chatted with tech support (first mistake worked until then) they told me they would install update (second mistake). I allowed Joyce in Bangladesh (doubt that is really her name) to try and update (third mistake)Now I have an inoperative pc. Can't even get into Windows. Just a set up screen that says manufacturing program is in unlock mode. I did manage to get into the bios set up a couple of times. It no longer has any info on the system such as model, SKU, serial number etc. So I can not even do a system restore.So tech support did an amazing job giving me a 1500 dollar paper weight. I did talk to a senior person and got the standard reply that we will send a box and you send it for repair.So an HP tech ruins my pc and now they expect me to send it off to be fixed. This is not the first one they have done this too. The last one required a new mother board. So I asked if they could just send the mother board and I would change it out. Funny thing I was told they don't have one. So how are they going to fix it in the promised 10 days with out the parts. It would be much faster for me to change it. Then funny enough they offered for me to buy a new mother board and they would reimburse me. Funny they don't have one to send but they have one for me to buy?Now as this pc that my daughter uses for university studies is dead and I am forced to buy another one so my daughter can do ... Read more

More replies
Answer Match 49.98%

Hi, i went into the driver support and found a updated bios "BIOS_Acer_P01.A2L_A_A" for my veriton X4620G windows 7 x64 (My currrent is BIOS_Acer_P01.A4). I downloaded the Bios file and try to flash but error pop up. So can anyone help please, thanks...










Solved!
Go to Solution.

A:Unable to flash latest Bios, help

L Bios is for flashing PC under Linux enviroment.  and you BIOS is the latest P01.A2P01.A4 (higher revision)

4 more replies
Answer Match 49.98%

Hello I would like to ask:I updated my BIOS last night to the latest version. I am on Windows 10, HP Envy x360. I updated it sucessfully and I am not facing any issues as of now. I wasn't facing one before I updated. Everything was going smoothly but I saw in the HP Support Assistant that I have numerous things to update so I clicked it all & updated. When the BIOS finished installing the computer restarted and I continued updating the others (which included the BIOS internal) but in the middle of the update, I stopped it. And it said it's not applicable anymore. I clicked to update again & the other 3 (there was 4 of them including the BIOS internal) updated succesfully. I even contacted support at that same night to let them do the manual update to give me a peace of mind. The technician said I updated it correctly. But what I read on everyp site on the internet that not to update the BIOS. So I am worrying & scared right now because my laptop might encounter problems that weren't there before the update. I am regretting my decision, I am not a techy person and I don't understand the computer world very well yet I decided to update without knowing first what it was. I am very scared of what might happen because of my carelessness.My questions are:1. Will updating the latest version of the BIOS without any problems in the hardware or anything (it was running smoothly, I just recently purchased it) harm the laptop or give problems to the laptop?2. What can I do to... Read more

More replies
Answer Match 49.98%

hi all i have an asus crosshair mother board and was told my bios is 2 years old i used the tool asus update but come up no bios updates.
bios at the moment is version asus crosshair acpi bios revision o5o2
just hope u can put my mind at rest
 

A:not a problem as such (latest bios update)

Check the Asus site for updated BIOS's. Or click here and click on BIOS. Note there are two newer BIOS's than your original one.
 

3 more replies
Answer Match 49.98%

Hi all! I'm wanting to know the latest bios update for my laptop dv6-1315ei serial VN001EA#ACQ It is currently on BIOS Version/Date Hewlett-Packard F.13, 25/01/2010 According to HP support the only bios for this is for intel processors but this model only comes in AMD System Manufacturer Hewlett-PackardSystem Model HP Pavilion dv6 Notebook PCSystem Type x64-based PCSystem SKU VN001EA#ACQProcessor AMD Turion(tm) II Dual-Core Mobile M500, 2200 Mhz, 2 Core(s), 2 Logical Processor(s)BIOS Version/Date Hewlett-Packard F.13, 25/01/2010SMBIOS Version 2.6Embedded Controller Version 51.35 Hope this helps. Thanks in advance. Hezzy

More replies
Answer Match 49.98%

To all with an 860-019 desktop. Don't install the latest bios update. Mine would not install update. Chatted with tech support (first mistake) they told me they would install update (second mistake). I allowed Joyce in Bangladesh (doubt that is really her name) to try and update (third mistake)Now I have an inoperative pc. Can't even get into Windows. Just a set up screen that says manufacturing program is in unlock mode. I did manage to get into the bios set up a couple of times. It no longer has any info on the system such as model, SKU, serial number etc. So I can even do a system restore.So tech support did an amazing job giving me a 1500 dollar paper weight. I did talk to a senior person and got the standard reply if we will send a box and you send it for repair.So an HP tech ruins my pc and now they expect me to send it off to be fixed. This is not the first one they have done this too. The last one required a new mother board. So I asked if they could just send the mother board and I would change it out. Funny thing I was told they don't have one. So how are they going to fix it in the promised 10 days with out the parts. It would be much faster for me to change it. Then funny enough they offered for me to buy a new mother board and they would reimburse me. Funny they don't have one to send but they have one for me to buy?Now as this pc that my daughter uses for university studies is dead and I am forced to buy another one so my daughter can do her school work. Of cour... Read more

A:Don't install latest bios will brick your pc

Sorry to hear of this unfortunate event with your new PC. A BIOS update is something I always reommend to consider the risks vs any enhancement it offers. In other words, if the machine is functioning well why risk it. I have seen too many go awry. Double warning  when a BIOS update balks on installing- never try to force it. I do understand the irritation when supposedly there is an update but it fails and an owner feels they must address it... Have you tried a BIOS rollback to revert to earlier version? This works in some-not all- cases. 1-Immediately after powering on start tapping the Esc key.2-When the menu appears, tap F2 for System Diagnostics.3-In the list of items will be Firmware Management.Use the arrow key to move down & highlight it.Press Enter key.4-You should see a Rollback BIOS option.Use arrow key again to highlight and press Enter key. 

1 more replies
Answer Match 49.98%

To all with an 860-019 desktop. Don't install the latest bios update. Mine would not install update. Chatted with tech support (first mistake worked until then) they told me they would install update (second mistake). I allowed Joyce in Bangladesh (doubt that is really her name) to try and update (third mistake)Now I have an inoperative pc. Can't even get into Windows. Just a set up screen that says manufacturing program is in unlock mode. I did manage to get into the bios set up a couple of times. It no longer has any info on the system such as model, SKU, serial number etc. So I can not even do a system restore.So tech support did an amazing job giving me a 1500 dollar paper weight. I did talk to a senior person and got the standard reply that we will send a box and you send it for repair.So an HP tech ruins my pc and now they expect me to send it off to be fixed. This is not the first one they have done this too. The last one required a new mother board. So I asked if they could just send the mother board and I would change it out. Funny thing I was told they don't have one. So how are they going to fix it in the promised 10 days with out the parts. It would be much faster for me to change it. Then funny enough they offered for me to buy a new mother board and they would reimburse me. Funny they don't have one to send but they have one for me to buy?Now as this pc that my daughter uses for university studies is dead and I am forced to buy another one so my daughter can do ... Read more

More replies
Answer Match 49.98%

intel Houston motherboard GA 6WMM7 bios update so my machine will run win 2000. I see from one of the posts the latest is 3 OY but the link goes to Acer computers

A:want the latest bios update mine is 3 OC

Why do you need a BIOS update to run Windows 2000?"intel Houston motherboard GA 6WMM7"The GA should be a dead giveaway. It's a Gigabyte board. Did it come out of a Packard Bell? If it did, do NOT use the Gigabyte BIOS.http://www.gigabyte.com/search/sear...http://www.uktsupport.co.uk/pb/mb/p...

8 more replies
Answer Match 49.98%

I have an Asus P4T-E bios, where can I download the latest drivers for that and can anyone explain me whats RAID, is it some sort fo hard drive or something????
 

A:Where can I download the latest drivers for my bios???

bios

http://www.asus.com/support/download/item.aspx?ModelName=P4T-E

raid explained
http://www.hardwarecentral.com/hardwarecentral/reviews/1611/1/
 

2 more replies
Answer Match 49.98%

Right... So here I am trying to perform miracles with a XFX/NVidia board again. I'm running out of hair to pull out, but I can't afford to get another one right now.

I'm sure the whole world knows that XFX and NVidia aren't buddies anymore, and I know that XFX skimped on the processor TDP ratings to 'save money', but I'm not sure if this problem is a faulty BIOS from XFX or if my chip is failing.. Anybody else still running this board? Perhaps someone can give a second opinion here...

Currently I'm running the v1.6 BIOS, the latest is v1.7. My PC doesn't have any problems with 1.6, I was just trying to see if I could get a Phenom II 740 BE to work on this board. The BIOS flashes without any problems, no errors or warnings or suspicious beeps.. But then the two-digit diagnostic LED on the board goes haywire with 1.7, with 1.6 it shows normal alpha-numeric codes, but on 1.7 the lines are completely mixed up and don't make any legible numbers or letters.

I must admit, other than that, I haven't found any problems.. My 740 BE still didn't work, but I'm not sure if that was also because of the BIOS or not. Has anybody else perhaps tried this BIOS yet...? If not, and you're comfortable with it, could you try it and see? I had no issues flashing back to 1.6 after trying 1.7, so you don't have to worry about being stuck on it if you don't like it...

A:XFX 750a SLI - Latest BIOS Update

I just flashed my motherboard (xfx 750a sli) to latest version 1.7 and I am having the same problems with the LED. I also think that my SATA devices have been disabled. Only my IDE drives are recognized. I created a support ticket on MOBO site but no response yet. I was wondering if you could send me the 1.6 ISO so I can reflash my system. Thanks.

9 more replies
Answer Match 49.98%

my computer has been ommiting a series of 3 long beeps and 4 short beeps upon start up. i checked the bios and it is using 0.06 and there is 0.07 available but when i try and download it it stops half way and says there was a error with the code 2753. can anyonne help me with this?

More replies
Answer Match 49.98%

i have a acer aspire ax1700 u3700. ive searched the website but theres like 4 different websites of ACER. like europe, asia, etc. they all show differnt bios. i am from america but is the europe bios that says its a newer bios better? somebody help me out plzz. im also trying to figure out my latest audio drivers cause the site doesnt give windows 7 drivers. thank you

A:will someone tell me the latest bios for my computer plzzzz...

Use the USA website, for drivers use the Vista ones.

9 more replies