Tech Problem Aggregator

Folio 9470m card reader issue in windows 10

Q: Folio 9470m card reader issue in windows 10

card reader in hp folio 947m not work in windows 10

A: Folio 9470m card reader issue in windows 10

@zubair044? Try installing this. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5271102&swItemId=ob_166654_1&swEnvOid=419... REO

3 more replies
Answer Match 101.22%

Hi, Appreciate if you can propose workable WWAN Card module that can operate and have the 4G/LTE functional in Malaysia. I'm using the HP EliteBook Folio 9470m with Windows 10 Professional (64-bit) installed on-board. I hv surf through and the only recommended WWAN Card is HP hs2350 HSPA+ Mobile Broadband Module which limited to 3G coverage. Is HP lt2522 LTE/EV-DO Mobile Broadband Module- U.S. only* (no Win 8 support), workable in Malaysia i.e,  Kuala Lumpur?  Rgds,Firdaus

More replies
Answer Match 91.14%

Hello, After upgrading from Win7 to Win10, my system got stuck when uninstalling MS Office, and nothing worked anymore (File Explorer etc.). I tried to make a factory reset, which got stuck, too, and no OS would be detected anymore. Then I tried to reinstall Win10 64 bit, which brought be a bit of trouble. I have an HP Folio 9470 with a 320 HDD and a 32 GB (I believe) mSATA. During my Win10 reinstall, I ran into trouble and then deleted all partitions on both drives and reformatted everything because I thought that was the method for a clean reinstall. First, I installed Win10 on the 320 HDD, but my BIOS did not appear to allow this (although harddisk was in the legacy boot options), which the Win10 installer had already warned me about, so I could not boot from my HDD and thus could not start Win10. Next, I reformatted everything and installed Win10 on my mSATA. However, the Win10 installer and later Windows 10 only showed a size of 11GB for the mSATA. The installation itself already took up 11GB and there was no space left for necessary drivers and updates, and Windows 10 malfunctioned. My feeling is that the mSATA was larger than just 11GB, but that a part of it is not shown any more after deleting partitions and reformatting. After multiple reinstalls, I do not know what to do any more. Any idea what how I might get a functioning version of Windows 10 on my HP Folio 9470m? Best regardsFrank

More replies
Answer Match 91.14%

Hello, After upgrading from Win7 to Win10, my system got stuck when uninstalling MS Office, and nothing worked anymore (File Explorer etc.). I tried to make a factory reset, which got stuck, too, and no OS would be detected anymore. Then I tried to reinstall Win10 64 bit, which brought be a bit of trouble. I have an HP Folio 9470 with a 320 HDD and a 32 GB (I believe) mSATA. During my Win10 reinstall, I ran into trouble and then deleted all partitions on both drives and reformatted everything because I thought that was the method for a clean reinstall. First, I installed Win10 on the 320 HDD, but my BIOS did not appear to allow this (although harddisk was in the legacy boot options), which the Win10 installer had already warned me about, so I could not boot from my HDD and thus could not start Win10. Next, I reformatted everything and installed Win10 on my mSATA. However, the Win10 installer and later Windows 10 only showed a size of 11GB for the mSATA. The installation itself already took up 11GB and there was no space left for necessary drivers and updates, and Windows 10 malfunctioned. My feeling is that the mSATA was larger than just 11GB, but that a part of it is not shown any more after deleting partitions and reformatting. After multiple reinstalls, I do not know what to do any more. Any idea what how I might get a functioning version of Windows 10 on my HP Folio 9470m? Best regardsFrank

More replies
Answer Match 85.68%

Hi Guys.

I have a fresh image of Windows 7 on my laptop but it will crash frequently when connect to a VPN.

I have only tested this over WIFI and have yet to test over a wired connection.

I have attached the correct file but I think some files may be missing as I can't seem to get the Diagnostics Tool to do a full run through.

Any help would be appreciated

A:BSOD When Using VPN on HP Folio 9470M

Hi BinaryStar0647.

Your BSODs are caused by Sunbelt Personal Firewall driver, a regular BSOD causer which is disconnected from the market from December 2011.

Seeing your files I realized that the drivers are used by some other thing, GFI Software Firewall.

ITEMVALUEName [00000016] GFI Software Firewall NDIS IM Filter MiniportAdapter Type Ethernet 802.3Product Type GFI Software Firewall NDIS IM Filter MiniportPNP Device ID ROOT\SB_SBFWIMCLMP\0000Driver c:\windows\system32\drivers\sbfwim.sys (5.2.51.0, 117.78 KB (120,608 bytes), 15/08/2013 10:37 AM)
And it is the driver that is failing here.

Code:
fffff880`0358c670 fffff880`00df2110Unable to load image \SystemRoot\system32\DRIVERS\SBFWIM.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SBFWIM.sys
*** ERROR: Module load completed but symbols could not be loaded for SBFWIM.sys
SBFWIM+0x1a110
And not alone, but with other components too.

Code:
fffff880`0358c408 fffff880`046aadd3Unable to load image \SystemRoot\system32\drivers\SbFw.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SbFw.sys
*** ERROR: Module load completed but symbols could not be loaded for SbFw.sys
SbFw+0x11dd3
I would suggest you to uninstall GFI Software Firewall.

Let us know the results.

2 more replies
Answer Match 85.68%

HiNot sure if my post was noticed as posted over weekend and got no reply so I'm trying again.Trouble started with random system restarts anywhere from 2 to 60min after powering on. That lasted a few days. Than it got worse, it was stopping before system boot with error message: motherboard product information missing. After a soft or hard reset (can't remember now) it stopped displaying anything, only LEDs came on and fan run, all lasting about 5s. I tested RAM in other machine, OK. Pulled HD out, no difference. Put a different HD in, no difference. With DC disconnected and battery out I left CMOS battery disconnected overnight. Now it cycles: LEDs and fan come on for about 5s, all off for 1s and tries again. Any help will be appreciated... Best regards

More replies
Answer Match 85.68%

Trouble started with random system restarts anywhere from 2 to 60min after powering on. That lasted a few days. Than it got worse, it was stopping before system boot with error message: motherboard product information missing. After a soft or hard reset (can't remember now) it stopped displaying anything, only LEDs came on and fan run, all lasting about 5s. I tested RAM in other machine, OK. Pulled HD out, no difference. Put a different HD in, no difference. With DC disconnected and battery out I left CMOS battery disconnected overnight. Now it cycles: LEDs and fan come on for about 5s, all off for 1s and tries again. Any help will be appreciated... Best regards

More replies
Answer Match 84.84%

What's the Max SSD I can upgrade go on HP Elitebook folio 9470m . i7 -3667u, 8gb ram ?

A:Max ssd upgrade for HP Elitebook folio 9470m ?

256Gb is the tested capacity.I would expect it to work with greater capacity though.here are the quickspecs:http://www8.hp.com/h20195/v2/GetPDF.aspx/c04111459.pdf 

1 more replies
Answer Match 84.84%

hi can someone help me please with bios password for my folio 9470m i cant remember it plzz someone help me 

A:Hp folio 9470m Bios Pass

Hi @ARtan-Krasniqi? Welcome to the HP Support forum. Thank you for posting ! Folio is a lovely business class notebook. Most business class notebooks (including yours, Elitebook and Probook, etc...) have better security than consumer class computers. You will have to contact HP Support for business for assistance on removing the password. Here is how >> http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html>> http://www8.hp.com/us/en/contact-hp/business-support.html  HP Business support should be able to send you a customised SMC.bin file and instructions which you can use  to reset the password.  Hope this helps. Let me know if you face any issues.

1 more replies
Answer Match 84.84%

I just recently purchased a Samsung 500GB SSD and I want to add this drive to my existing storage on my HP EliteBook Folio 9470m. The laptop currently has 256GB of SSD stock on it and I'd like to add an additional 500GB. I see that there is a connection that I'm missing. Anyone have the exact part that would service this connection?  Or try this link if pics don't show up  Pictures of what I'm referring to on my notebook  Thank you all!!  

More replies
Answer Match 84.84%

HI, I have an EliteBook Folio 9470m running WIN 8.1 Ent 64-bit. I have an issue with the Touchpad not working. I have installed the latest driver (sp66111) from HP Support and as a result only the PointStick and associated buttons work and not the Touchpad. Has anyone experienced this and if so what is the fix please? Incidentally, the Touchpad was working at one stage on this OS and ceased to work afterwards. I have re-stalled the OS from scratch withpout success either. Thanks in advance, Vik

A:Folio 9470m Touchpad Not Working

The touchpad might be turned off.Double tap on left top corner of the touchpad to activate/deactivate the pad.Also goto Control Panel>Mouse>Device Settings> Click on the touchpad/Luxpad>Click settings and check the settings.If this dosnt resolve then reinstall drivers from hp.com or from Recovery Manager.Using Recovery Manager to Restore Software and Drivers:http://support.hp.com/us-en/document/c03430118

5 more replies
Answer Match 84.84%

We have 2 x Folio 9470m notebook. 1st has 8GB of memory with the upgraded ram using https://www.skhynix.com/eolproducts.view.do?pronm=DDR3+SDRAM&srnm=HMT451S6AFR8A&rk=20&rc=module  The 2nd only has 4Gb of memory and want to upgrade - I found this other memory cheaper - https://www.skhynix.com/eolproducts.view.do?pronm=DDR3+SDRAM&srnm=HMT351S6CFR8C&rk=20&rc=module  My understanding is the main difference is the what I already have is the Low Power (1.35V vs 1.5V). Does anyone know if Folio 9470m will work with this 1.5V version of the memory? Thanks for your help.

A:PC3 vs PC3L memory for Folio 9470m

From the Service Manual: Two customer-accessible/upgradable memory module slots DDR3 PC3-1600-MHz dual channel support Supports 16384-MB of system RAM in the following configurations: ? 16384-MB (8192-MB×2) ? 8192-MB (8192-MB×1 or 4096×2) The specified memory is 1.5 volt. DDR3L will run at either 1.35 or 1.5 volt but I generally avoid mixing voltages. That is why the DDR3L is working for you and I assume you have 2 of the same in the laptop with 8 gigs.  Can you figure out what is in the 4 gig machine now? I would not mix voltages or density...i.e would not have one module with 8 black blocks and one with 4. Try to match the existing 4 gig module is what I am saying...not the exact brand of memory but the characteristics of it. 

1 more replies
Answer Match 84%

Hi, after updating my HP Elitebook Folio 9470m to Windows 10 Pro 64, I am no longer able to shot down the PC.Every time I am trying to do a shot down, the windows screen turns into black for a few seconds and than reappears.I already did install the BIOS update version F.62 REV: A PASS: 1, as someone on the net said a BIOS update would help.Unfortunately this was not a solution. Thanks for your help

More replies
Answer Match 84%

Hi, I work in tech support for a company and one of our enterprise laptops mysteriously has lost its "tattooed" information.  The user who had this laptop left the company and when we went to wipe it we discovered this issue.  Upon starting the machine the HP splash screen has in red text on the top left of the screen "Manufactoring Program Mode set 1 of 10" after the splash screen a "Product Information not Valid" screen appears.  It reads: Product Information not validThe following product information programmed into the system board is missing or invalidSYSTEM BOARD (00A)Product Name Product Serial NumberProduct SKUProduct FamilySystem Board CT NumberENTER - Continue Startup For more information, please visit: www.hp.com/go/techcenter/startup I know that there is an HP utility tool to "tattoo" this information back onto the machine.  As an enterprise that uses 95% HP equipment (our monitors, mouse, keyboards are the only non-HP equipment) I think that the tech support deserves these types of tools to troubleshoot issues.  Sure the machine boots normally if you hit enter, but it's alarming/scandalous to be presented with that product information not valid screen when powering on a machine.  Bonus points to whoever can provide some reasoning as to how this occurred.

More replies
Answer Match 84%

Hi all,  I have a quick question. Recently I bought HP Folio 9470m from my friend. It came with HP original charger 18.5V | 3.5A 65W but when I looked under the battery on my laptop it says 19.5V | 2.31A  I google about replacement charger fo Folio 9470m and there is allot of it with 18.5V | 3.5A 65W.  My question is, how can I be sure tahat this is the right charger? If it is not, can this diference in Voltage damage my laptop?  













Solved!

View Solution.

A:Right charger voltage and amperage for HP Folio 9470m

MaxLAB wrote:Hello banhien, thank You for Your fast reply. Product number is: D3Q03AWHi, Thanks. I can see part # from your photo. It is not a right part, no idea what is it:               http://partsurfer.hp.com/Search.aspx?SearchText=608425-002 but this one            http://partsurfer.hp.com/Search.aspx?SearchText=609939-001 is used for more than 200 products and I can't find yours on the list. Regards.

5 more replies
Answer Match 84%

I bought this second hand HP Folio 9470m Elitebook and I am stuck at the BIOS password. I cant install an operating system on it as the secure boot is on and to disable it i need to entyer BIOS. Please help. I havent tried the password as i dont want it to be locked. I can provide the seriel number if required. Thanks heaapsss in advance.

More replies
Answer Match 84%

I cant Update My Hp Foilio 9470m Bios Driver he ask me to enter the password i try my adminitrator password but its not working my biomatric sensor not working for troubleshooting biomatric sensor i need to update my bios driver but i cant do this without password  is any one there who help me plzz.....

A:Hp Folio 9470m Bios Password Missing

@Us123 For that model you will need to contact HP and they should be able to send you a customized SMC.bin file which you can use at boot to reset the password.  http://welcome.hp.com/country/w1/en/contact_us.html When talking to the HP rep ask them to escalate your service request. REO

1 more replies
Answer Match 84%

Hi Team, I need Need SC.BIN file for HP EliteBook Folio 9470m Ultrabook. My Product Number is: D4R81UC#ACJ Kindly help me. Thanks,Abhiram

More replies
Answer Match 84%

I am the owner of a used Elitebook Folio 9470m laptop that I procured from my friend. It is very lightweight laptop, and I really love it.Unfortunately, the laptop came with admin password on the BIOS. I already contacted him, and he has no idea what it is. This was his father laptop, and he also has no idea about it. So, I'm left here with this laptop, but no way to tinker around with the BIOS. Obviously this isn't good!All sources lead me to this area where can I contact HP support to try to solve my problem.  I opened up two cases.  First one, case ID 4779632926 and did not get response. Second, 4779725521 and this is response i got. " I  really apologize for the inconvenience, unfortunately we will not be able to support this case."  I tried to reply to this case with subject <4779725521> and then I received message that case is closed. We are sorry, but we were unable to process your request.

The Case with ID "4779725521" is closed or does not exist and cannot be updated. PLS if there is any chance to solve this, let me know.  I can provide any information you need. Thank you.

More replies
Answer Match 82.74%

when I connect the laptop to the power network 220V or the battery laptop switches on itself (without push the power button).How Fix it?

More replies
Answer Match 82.74%

Hi everyone, I have a trouble with my laptop HP folio 9470m win 7 pro 64bit . Please help me , thanks so much
 

A:Ntoskrnl.exe cause BSOD laptop HP folio 9470m win 7 pro 64bit

Try testing the hard drive and the memory. To test the hard drive go to Computer and right-click on the C drive, select Properties, tools, check now. Set a disk check on the next start up. Let the check finish. To test the memory go here:
http://www.memtest.org/
Download version 5.01 and burn it to a CD or DVD. Boot the laptop with this disk and run Memtest86 for at least 7 passes. No errors are allowed...
 

1 more replies
Answer Match 82.74%

Anyone with a clue on how to solve this problem

More replies
Answer Match 82.74%

hi everyone, i have a trouble with my laptop HP folio 9470m win 7 Pro 64 bit. that's about error BSOD of my laptop . Please help me, thanks so much

Attachment 341519

A:BSOD error Ntoskrnl.exe win 7 Pro 64 bit laptop HP folio 9470m

Please continue on your previous thread.

http://www.sevenforums.com/bsod-help...exe-87f7e.html

1 more replies
Answer Match 82.74%

Gurus, Will someone help me in getting the Bios Administrator Password for my HP EliteBook Folio 9740 with SN: CNU313CK1B Appreciate your help Regards,TR 

A:Bios Administrator Password for HP EliteBook Folio 9470m

Hello Tejas, We would need the screenshot of F1 screen. To generate smc.bin file. best is contact HP chat support or phone support and send the f1 screenshot, they will generate in 10mins and provide it to u.




Regards;SmileyI am an HP employeePlease click the White Kudos star to say thanks for helping.Please mark Accept As Solution if my help has solved your problem.

1 more replies
Answer Match 82.74%

I am experiencing the following issue and hope that someone in the forum as an idea / suggestion. When I have the screen connected via via display port cable with the docking station and I have my laptop docked, I dont get any signal and the screen keeps black. This is independent of the Operating System - I used Windows 7, Windows 8. When my laptop is docked but I attach the display port cable directly to the laptop it works without any problem. I have also realized that with other displays 23'' or 24'' the setup with the docking station works without a problem. So it has to be a cominbination between UltraSlim Docking Station and ZR2740w screen. Any advise what else should be tried?











Solved!
View Solution.

A:HP ZR2740w and HP Folio 9470m / UltraSlim Docking Station

Update:  After calling HP technical support I and being bounced among various clueless offshore tech support reps, I finally landed on the US-based workstation support department.  Justin looked up the problem and identified it as a known issue and is replacing my monitor cable with one that HP says will work.   Also, in the meantime there is a workaround that I had figured out.  If you don't use the displayport port on the ultraslim docking station but pug the cable directly into the computer it works fine.  There is some inconvienence associated with this as you have to plug it in every time you dock and unplug it every time you undock (and of course the cable always falls behind the desk while you are doing this), but it is okay as a solution while I am waiting for the new cable to arrive.  Will update this post after it arrives and report whether it works.

10 more replies
Answer Match 82.74%

Anyone with a clue on how to solve this problem

A:hp notebook folio 9470m product information not valid

Can you take a picture of message?




I am an HP employee.

1 more replies
Answer Match 81.9%

Hey I cant install driver of bluetooth and mobile broad band for my HP folio 9470m in windows 10 64 bit OS plz help me out i try windows 8.1 drivers but they did not work.

More replies
Answer Match 81.06%

So i'm using a Folio 9470m at work on a 2013 Ultraslim Docking station with 2 Display Port connectors, but if i attach two screens to those it only displays them as one device and mirrors the image on both screens. Furthermore if i go into the screen and resolution settings, both identify as screen 1, but i can set 3840x1080 instead of 1920x1080 and at that moment the picture will span over both screens as one. The downside to this is that the login screen, windows i open for the first time, they're all gonne appear in the middle where the bezels are, it handles them as one bigger screen and not as 2 screens that extend each other. I need them to be detected as 2 seperate screens, and so far i have had no success. Has anyone experienced this or knows a solution? I really don't want to connect the second screen via VGA. Can the folio handle 2 display port connections on a dock? Is this maybe the cause?

A:Folio 9470m DUAL Display Port on HP 2013 Ultraslim Docking S...

As far as I know the  Folio 9470m doesnt support more then one external display.  I think you can verify this by having a look at the quickspec document for the model.

3 more replies
Answer Match 67.2%

Hey everyone. I am having trouble with my Multi-Card Reader/SD Card Reader. I am trying to take pictures off of my SD card and put them on my computer. I have lost my USB cord for the camera and can't locate it at this time or I would do that.

So anyway, I put the card in the SD card drive and the green light does not come on. I then open up My Computer and the drive isn't even listed. I checked in Device Manager as well and as far as I know, it is not listed in there either. If it is, then it is under a name that I don't recognize.

So anyway, I would greatly appreciate some help in getting my computer to recognize my Multi-Card Reader/SD Card Reader.

Also, I tried these things from my Standard Account.

Here's my system information:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X2 215 Processor, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 4863 Mb
Graphics Card: NVIDIA GeForce 9100, 256 Mb
Hard Drives: C: Total - 599384 MB, Free - 536482 MB; D: Total - 10992 MB, Free - 1649 MB;
Motherboard: PEGATRON CORPORATION, VIOLET6
Antivirus: COMODO Antivirus, Updated and EnabledClick to expand...
 

A:Solved: Windows is not recognizing my Multi-Card Reader/ SD Card Reader

10 more replies
Answer Match 63.42%

I use windows 8. But now a days when I connect my card reader with computer then nothing is show. only sound is hear.

I am new here and i do not know anything about this 4m.

A:card reader issue

Tried reinstalling the drivers and/or programs for it ?

3 more replies
Answer Match 63.42%

I have a Kingston MobileLite G4. I have encountered a problem with the front usb port on my case or motherboard not sure. I have to plug in the mobilelite g4 a couple times to get the computer to recognize it then it gives me a message "This Device can perform faster" USB Mass storage. Which is strange because I am 100% sure I'm plugging into usb 3.0 port and the mobilelite g4 is usb 3.0 device. The problem only happens in front usb ports of the case. When I plug the mobilelite g4 in rear usb 3.0 ports I don't get Device can perform faster message. I never had a problem before with the usb 3.0 port until now recently. I tested speeds benchmark crystal disk the speed results are slower now. I tried using usb 3.0 extension cable and it still would not work. Seems nothing can give the mobileite G4 enough power. I tried updating to latest usb 3.0 drivers still no luck

A:USB SD Card Reader Issue

Front USB ports are notoriously under-powered....use the rear ports...

2 more replies
Answer Match 63.42%

I think I may be having a driver issue. I picked up a USB2.0 ALLin1 Card Reader. It worked for a while then one day I plugged my iPod Touch in and got a message saying that my usb port is not working at optimal speed or something to that degree. From the sounds of it my computer forgot that the drives are USB2.0, and has stopped seeing the card reader as a portable hard drive. It can still see my camera and iPod Touch, but usage of the camera is very limited.

I've removed usb drivers in the past and the card reader seemed to start working again, but it's kind of a pain to do often. Any idea what's going on? Thanks all!

A:all-in-one card reader issue

Whenever my XP machine tells me that, it either means that the USB device I am plugging in is messed up, or it does not have good physical contact.

Try unplugging and plugging the device back in. Also try another USB port.

2 more replies
Answer Match 63.42%

Since upgrading to windows 7 from vista, I can no longer delete files from my SD card. When I try to format it, it tells me it's write protected - but it's not. I thought maybe my SD Card was faulty, but I've since tried it on my parents Vista OS and it works absolutely fine.

Any help?

Karen.

A:SD Card Reader Issue

Hi Karen,

I've found some Vista drivers that may work to solve this problem in Windows 7. Please try downloading the appropriate one below:

If you have Windows 7 32-bit: Ricoh 5-1 Card Reader Driver HP Pavilion dv6710ea Entertainment Notebook PC - HP Customer Care (United States - English)

If you have Windows 7 64-bit: Ricoh 5-1 Card Reader Driver HP Pavilion dv6710ea Entertainment Notebook PC - HP Customer Care (United States - English)

Let me know if that helps at all.

Cheers,

Walker
Windows Outreach Team

9 more replies
Answer Match 63.42%

ok, i have a emachine 6810 with a built in media reader. i use to run windows xp, and i had no issues reading any type of non hc sd card(2GB was my max i believe) now under windows 7(and yes i tried this under vista at one point) i can not read my 2gb card. my 256 will read, but not the 2GB. i have looked in vain for a replacement driver to the generic media reader drivers for win7, but to no avail. any one able to help me out?

A:SD Card reader issue

You can try installing the XP driver in compatibility mode.

Compatibility Mode

Generally, the two main driver makers for SD cards are Ricoh and TI. You can download their drivers (just google) and see if they work, If you know what brand the card reader is let us know, you can also check in device manager.

8 more replies
Answer Match 63.42%

Hello everyone!Since I have bought my HP notebook (HP Envy 15-ae004nl) I've got some issues with the SD card reader: when I insert a SD card I have to push to the end of the connector before the notebook sees it. The problem is that I can't extract it after the insertion, because the card is entirely inside the Card Reader. There isn't even a "lock-in" as I have had in my previous laptop. It's a singular case of my laptop or it's the notebooks series that is made in this way? Thanks in advance for your attention

More replies
Answer Match 63.42%

I am having a very bizarre problem. I have Windows XP Pro and have a 12 in 1 card reader installed in a 3.5" drive bay. Everything has worked great for years. Suddenly a couple weeks ago I had a virus which erased all of my startup items in msconfig. To make a long story short I removed the virus which McAfee didn't detect. I purchased Kaspersky and fixed it. I did a repair install of Windows XP Pro. I reinstalled everything which usually loads at startup. The computer works perfectly except for my card reader. When you used to open My Computer there would be about 5 or 6 icons for the card reader listed each with a drive leter. These are no longer there. I went into disk management and it won't let me assign a drive letter to any of the drives. I uninstalled and reinstalled the software that came with it. When Windows reboots it shows it as USB Mass Storage and detects the drive. It list it in the Safely Remove Hardware in System Tray which I don't remember it ever doing. When I put a card into the card reader it does nothing at all. I also replaced the volsnap.sys and usbstor.sys. No matter what I do no icons for the card reader are showing in My Computer. The only thing I can think of is a registry issue, possibly? Anyone have any suggestions? Please let me know, Thanks!
 

More replies
Answer Match 62.58%

Dell XPS 410 running Windows 7 32 Bit (upgrade from Vista).

Desktop came with a built in Card Reader.

If I recall, the card reader will only take SD cards up to 2GB. Does this sound right?

I think that someone brought over a digital camera with a 4GB card (with only a few pictures on it) and the Dell XPS 410 built in card reader would not recognize the 4GB card. Card Reader does recognize all SD cards 2GB and less.

Anyway, to read a Secure Digital/SD card above 2GB - do I need a new and different card reader or is there something else that I can do to get the desktop to read above 2GB?

If I buy a new external USB SD card reader - will my XPS 410 be able to read anything abover 2GB?

I guess my question is - is it the card reader or the desktop that limits the ability to read an SD card above 2GB in size?

A:Dell XPS 410 32 Bit - Card Reader Issue

I've never heard of a card reader only reading a specific sized card.

It could be a driver issuer from the upgrade of Vista to 7. Go into device manager and uninstall the driver and then reboot. This will reinstall the 7 generic driver for the card reader and then check the card reader. If that doesn't work then go to the PC manufacturer site and check there for a windows 7 driver for the card reader.

3 more replies
Answer Match 62.58%

I bought this desktop computer last year.  On the front of the tower is a 7-in-1 multimedia card reader that the HP site says is compatible to the Memory Stick Pro.  Today my digital camera broke and when I removed its Memory Stick and tried to insert it in the computer, I found that the Memory Stick was much smaller than the 7-in-1 and never would set in place, so much so that it slipped completely into the reader and I had to use tweezers to pull it out.  It never locked into place so the contacts never could allow the computer to read it... it just laid there loosely.  The 7-in-1 slot is exactly one inch wide, while the Memory Stick Pro is 3/4 inches wide.  I'm disappointed that I was led to believe that my reader was compatible when it apparently is not.  Is there a way to make this work or am I going to have to buy an adapter to use just one time before I throw this camera away?

More replies
Answer Match 62.58%

hey guys, trying to make a SD card be read on the PC it is built into the computer, and when plugged in the light goes red, indicating of course, that something is in there, however no option shows up to change files, we have tried with the lock switch, both ways...and still no luck, it also DOES NOT show up under computer, the pc is running windows 7 home premium.

A:memory card reader issue

From a Microsoft Answers thread:






Quote:
1. Check if the device is getting detected in device manager. Follow the steps to go to device manager
i. Click Start, type devmgmt.msc and press enter.
ii. Search for the name of the device

If the device is not getting detected in device manager, then check if it is hidden device.
i. Click show hidden devices under View
ii. expand all the nods under device manager
iii. There would be many grayed out entries in device manager uninstall all the grayed out entries under all the nods and then restart the computer and plug the external device to the computer and check if it works

2. Install the latest drivers from the manufacturer website and even make sure the driver is compatible with the version of operating system installed on your computer. check if it works
Link: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly

Install the driver in Compatibility mode: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows

3. Check with any other another SD card if it is getting recognized or detected or you may even check if the same SD card is getting recognized or detected on other computer

Thanks and Regards:
Samhrutha G S - Microsoft Support


Source

Also:

A Secure Digital (SD) card may not be recognized on a Windows 7 based computer.

1 more replies
Answer Match 62.58%

I have a notebook Gateway M 1617, with Realtek card reader but it doesn working with the new win7 build 7100, I've tried go to realtek driver web site, downloaded the win7 driver version also got the win vista version. but nothing worked for me...

i need help

thx.

A:Realtek USB 2.0 Card Reader x64 issue

  
Quote: Originally Posted by todbull


I have a notebook Gateway M 1617, with Realtek card reader but it doesn working with the new win7 build 7100, I've tried go to realtek driver web site, downloaded the win7 driver version also got the win vista version. but nothing worked for me...

i need help

thx.


I'd see if Windows can just handle the reader with its own drivers.

In some cases this hasn't happened automatically, but by installing the Realtek Windows 7 drivers then removing them (via Programs on the Control Panel) the reader gets recognized correctly by Windows itself.

1 more replies
Answer Match 58.8%

My HP FOLIO 1040 G1 doesn't start up.When I press power button : just power,wifi and Physical Sound Mute Button flashing in continue.Need your support please.

More replies
Answer Match 57.96%

Microsoft assured me that my Windows 7 laptop (Latitude E6510) was ready to upgrade to Windows 10.  In a way, it was... but only after I upgraded did I see Dell's caution that this model was not verified to work 100% with Windows 10.
Almost everything works (sound didn't work initially, but I found a fix online that helped), but clearly new drivers are required which recognize and drive the PC Card reader, the SD card reader, and even the CD/DVD drive.  The CD drive won't even open when pressed, nor is it recognized as a drive by Windows 10. 
Yes, these inputs can all be accessed via external USB drives,  but please provide new drivers, Dell.  For those with this model on the fence about upgrading, determine how much you need these built-in readers/drive!

A:Latitude E6510: Windows 10 works, but not CD/PC card/SD card reader

I've just upgraded my Latitude E6510 to windows 10. Most of the drivers refuse to run as they cant recognise W10 OS. I suggest anyone thinking of the upgrade not to at this stage. The Dell Driver downloads area warns of this.
Right now I have a non working keyboard, mouse pad, backlight. My biggest concern is the Nvidea graphics drivers wont install so I have fuzzy text with some of my programs (not all).
I am surprised MS allowed me to download W10?? I'm going to waste another day trying to fix this up or I'm going to have to reinstall W7. Very unproductive-not happy

7 more replies
Answer Match 57.54%

Dear community, I recently bought a brand new HP EliteBook Folio 1020 because it's officially given as supported by Ubuntu OS. So after installing this system, I discovered that the Alps Forcepad is not fully supported by Linux. Basically, the mouse and click is working, but MultiTouch features are not working at all. I mean that my old EliteBook 8460p supported the two finger scrolling perfectly with the Synqptics drivers, but unfortunately, this is not the case for this new computer. After some research, the problem comes from the psmouse module, the touchpad is detected as a generic PS2 mouse. some Google research give me some third party project to give better support for Alps device like https://github.com/he1per/psmouse-dkms-alpsv7, and while the modules seems to be compiled corrected and then finally detected as a Alps device, the multitouch feature still not working. Is there any patch for psmouse that can be provided in order to support the muti touch feature, at last the two fingers scrolling, this is the minimum for having a decent usage of the applications. Thank for your help and best regards Obitwo.

A:MultiTouch issue with Ubuntu and EliteBook Folio 1020

That git project you're trying to build is for an old Linux Kernel (3.13). Firstly it will not build with any recent kernels becuase the source functions/logic have changed too much.In Linux 3.18 support for Forcepad was added in the drivers/input/mouse/synaptics.c file. But this supports the HP 1040 Forcepad. The HP 1020 uses another (perhaps newer) model of Forcepad. I too am desperately looking for a solution..

7 more replies
Answer Match 55.86%

Windows 7 SP2 Intel desktop PC.
I have a weird 3? slot internal USB card reader problem.
All SD and mSD cards (last with adapter) are recognized normally as storage devices except one Sandisk Extreme Pro 8GB micro SD, which worked normally until 2 weeks ago but still works normally with other external USB card reader.
With internal USB reader all SD cards used to be drive L: and still are L:, except this Sandisk Pro.
When this Sandisk mSd card is inserted nothing happens and looks like Windows considers it as nothing or something else but not a storage device.
Nor computer storage manager doesn't see it in internal card reader.

But when I use external card reader, this Sandisk SD card works normally and is given a letter S:.

It looks like some kind registry numerator of USB devices has listed this SD card ID as not storage device.
Any ideas how to troubleshoot?

A:SD card stopped working in old reader while reader and card are OK

If it were in the registry as not a valid device, it wouldn't work from the external reader, either. I would check to make sure that you don't have dirty contacts in the internal reader. Sometimes dust can get in there and raise havoc, especially on some SD cards which have more active contacts than others. One dirty contact can make one card not work, while other, low density cards, will.

2 more replies
Answer Match 55.86%

Hello, I have a question about SD Card Readers. I have one where you insert the SD Card, and plug in a USB cable to connect it to the computer. Does the SD Card use a USB Root Hub to connect, or does it use the Realtek 2.0 Card Reader?

My real question is, if I had accidentally uninstalled my Realtek 2.0 Card Reader built into the computer, will an SD Card Reader connected by USB be able to read the SD Cards?

Also, is there a way I can prevent SD cards from being read through a reader on my computer without uninstalling a USB Hub Driver? Like specifically prevent new Drivers from being installed, or prevent new SD Cards from being recognized? Such as using a free downloadable tool that someone may know about.

I have tried going to Devices and Printers, right clicking on my PC, Device Installation Settings, then turning off automatic driver installs. After I do that, and plug in a new device, it still auto installs the drivers and can use it.

A:Does an SD Card Reader need the Realtek 2.0 Card Reader Driver?

Disable the driver, through Device Manager.

2 more replies
Answer Match 55.44%

I have tried to download some pictures to my Dell Inspiron MT560 from an SD card, using the in-built multi card reader. The reader did not recognise the card and after several attempts I viewed the properties in Device Manager.
For some reason, although drivers for other cards appear, that for the SD card ( and MMC?) does not show at all, even in hidden devices! I am at a loss how that could be and how to rectify problem. Can anyone help please?
In case it is relevant here is info gathered. Generic Driver volume for the other card varieties is
6.1.7600.16385(win7_rtm.090713-1255) and specifically for the SD card USBSTOR\Disk&Ven_Generic-&Prod_SD/MMC&Rev_1.00\058F63626420&0

A:Found generic reader for SD card in 19in 1multi reader AWOL

Embarrassment squared! My failing brain forgot System Restore.

Basic problem is still to be solved though: the card reader will not recognise the SD card. Hope you'll still help.

3 more replies
Answer Match 54.6%

The following occurred on an HP laptop running Windows 7 Professional, and I find it quite peculiar and can't figure out what's going on nor how to fix it.
 
The machine had Adobe Reader XI installed on it and an attempt was made to update it to Adobe Reader DC.  I've done this on multiple machines as an "install over" with zero issues.  Things were going along swimmingly and even the desktop icon had been switched then when the install was nearly finished it failed.
 
After this there was no record of Adobe Reader in Control Panel->Programs and Features at all (as I was intending to force an uninstall at this point).
 
When I attempted to install Adobe Reader DC again it failed quickly saying that a more recent version was installed, which leaves me with nothing from Adobe for reading PDFs.  This would not be a huge problem under normal circumstances, but the laptop is used by someone who's blind, in conjunction with the JAWS software, and it only plays well and reliably with Adobe Reader.
 
I even tried rolling the machine back to a Restore Point from several days ago.  That didn't help either.  It looked like Adobe Reader XI had been restored but now when one attempts to open a PDF document an "Unknown Software" message is presented.
 
Any guidance on this issue would be appreciated.
 

A:Adobe Reader Issue(s) under Windows 7 Pro

Have you tried going to the control panel and selecting default programs -> set your default programs -> Find Adobe Reader in the list and set it for all default formats it supports ?

5 more replies
Answer Match 54.6%

Digital Camera Buffs going to Windows 7:

My PNY USB 2.0 "8 in 1" Card Reader appears to be a "legacy" product. The reader handles my C3030 digital camera's "SmartMedia" cards and is indispensable to me. The reader still works great on XP, but doesn't work on Windows 7. You insert it into the USB and the hardware found noise is made and to varying degrees the drives show up in explorer but NO drives (SD, mmc, smartmedia, ms pro, ... ) are readable.

I've spent some time removing/reinstalling "usb mass storage drives" and trying XP mode, which does not seem to have anything to do with USB, all to no avail so far.

Any ideas on how I can get this reader working on Windows 7?

Any suggestions for a SmartMedia reader for Windows 7?

Has anyone gotten "legacy" camera USB port products running through XP mode in Windows 7?
 

A:USB 2.0 Card Reader on Windows 7

6 more replies
Answer Match 53.76%

I have got Card reader Soyntec Nexoos 552.When I first plugged it in mass storage installed successfully but software installation failed!User manual says it doesn't need driver to work on Windows 7.Actually the mass storage device icon is appeared in the devices and printers window but there is no drive of my micro SDHC in my computer.
 

More replies
Answer Match 53.76%

I formatted vista and installed windows 7 on my Dell Inspiron 1520 laptop.
It no longer recognizes the card reader. I went to the folder options and turned on "show empty devices" and it still doesn't show. I got drivers but it still doesn't show (perhaps wrong drivers).

Any suggestions? It worked ok in vista.

A:On-Board Card-reader. Windows 7

You probably have the Vista drivers for it. Go to Dell's website and check to see if a Windows 7 driver is available.

2 more replies
Answer Match 53.76%

After installing windows 10 the SD card reader won't work. I contacted Microsoft..they fixed other issues but said HP drivers had to be updated to read the SD cards.  Please help. I am a professional photographer and HAVE to use SD cards!

A:SD card reader not working with windows 10

Hi: What is the full model number of your notebook? Most of the newer pavilion notebooks come with a Realtek card reader, so try the first driver on the list from the link below. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...

5 more replies
Answer Match 53.76%

Help! I am running Windows NT 4.0 with all the latest service packs. I am trying to install a Delkin Devices Reader-1. This is a parallel port compact flash card reader. I followed all directions and I do not see the Removable Disk Drive in My Computer. I have checked the connections numerous times and have uninstalled and reinstalled the software several times as well. I have tried rebooting with a card in the reader and the reader all connected as well and still nothing happens.

How can I troubleshoot to see if there is a conflict with something? I know there is no Device Manager in Windows NT but is there a way to see if the reader is even being recognized??

Please help!!!!!
 

More replies
Answer Match 53.76%

Have a Gateway DX4200-09 which was upgraded from Vista 64 Home Premium to
Windows 7 64 ultra. Have lost the 15 in Card Reader on the upgrade. Everything else works. Can not find a driver for the card reader.

Have 7 My Book drives up, ATI All-in-Wonder HD PCie, 1 Blue-Ray writer, 1 DVD Writer, AMD Phenom 9950 CPU,Realtek Sound Card

A:15 in 1 Card Reader on Windows 7 Ultra

Have a read through this tutorial and follow the steps for any unknown devices/card readers/host adaptors.
if you have any problems post back the pid info here, and I'll see what I can do for you

5 more replies
Answer Match 53.76%

On my PC there is a card reader connected. It shows up as 4 different drives when I look at "My Computer" and elsewhere. One of the slots in the reader is for sim cards. When a sim card is inserted a Windows sound is heard and the "Installing Device Driver" window shows up and then another window stating the installation was not successful. Any further action from within windows does not solve the problem. I tried an external card reader and the same negative results. this was tried with 3 different sim cards. Any solutions out there?
 

A:Windows 7 won't recognize sim card (in reader)

I found this: http://lazybit.com/index.php/2010/10/20/smart-card-driver-for-windows-7-popup

Curious though, why do you want to read a SIM card?
 

3 more replies
Answer Match 53.76%

The problem happens with a Thinkpad R500 running 32-bit Windows 10.

The R500 has a built-in card reader, however, that reader no longer works properly.
Several times I've installed drivers for the card reader. Each time, the reader briefly works, then fails to operate the next time the R500 is used.
Checking the knowledge base and Levovo online support turns up no cause, explanation, or solution.
The card reader has been activated in the R500's BIOS.
SFC/scannow shows no problems.

Event viewer shows this:
Device SD\DISK&Generic&SD02G&8.0\6&1777445a&0&50324e24&0 could not be migrated.
005&0
Class Guid: {4d36e967-e325-11ce-bfc1-08002be10318}
Location Path:
Migration Rank: 0xF000C0008000F130
Present: false
Status: 0xC0000719

More replies
Answer Match 53.34%

I have several of these and am upgrading these to Windows 10.  But the main irritation is that the SD card reader is no longer working after the upgrade.  Installing the Realtek drivers from here doesn't help either.  Pushing an SD card into the reader pops up a drive F but the drive is not accessible, and the system goes into mollasses mode AKA "green ribbon of death" when trying to access my computer in Windows explorer. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT... Of course HP doesn't have anything for Win10, so we are on our own. 

More replies
Answer Match 53.34%

I am running a Dell Desktop, Windows 7 64-bit OS with an internal SD card reader installed by Dell. Both the internal card reader and the card reader on my HP inkjet printer no longer recognize any of the SD cards plugged into it. Here&#8217;s what I&#8217;ve done so far:

1. The SD card is recognized and can be opened to photo files if it is in the Canon camera and the camera is plugged in via a USB cord.

2. There are no ?? or !! in the Device Manager. All devices are "working properly", including the &#8220;RealTec 2.0 Card Reader&#8221;.

3. The RealTec 2.0 Card Reader was uninstalled and reinstalled from the mfgrs website to no effect on the problem.

4. Previously, the SD cards used to be recognized automatically and the popup window asked how I wanted to open it whether the card was inserted in the internal card reader or the card reader on the HP printer. Now, there&#8217;s nothing recognized on either.

5. There is no SD card showing in My Computer either

I think that a recent windows automatic update screwed this up, but I can&#8217;t be certain. I&#8217;ve searched tech forums for a solution to no avail. Please help.
 

A:Windows 7 64-bit not recognizing internal card reader

7 more replies
Answer Match 53.34%

Can anyone please help.

On my computer I have 2 memory card readers.
I tried using one of them but it wouldn't work. When I looking in My Computer it shows that Windows XP (Media Edition) isn't seeing them.

Windows used to see them but suddenly have vanished.

Does anyone know how to make Windows see them again without having to reinstall Windows.

They were originally lettered as Drives D & E which are now missing.

All help is much appreciated.

A:Windows XP vs Memory Card Reader problem

Microsoft Knowledge base has an article that will help you with your problem. It is article ID: 890546. This article discribes proper removal of hardware and a hotfix you can get from Microsoft.

1 more replies
Answer Match 53.34%

I have followed all the advice given that I had found thru googling, most came from off the Win7 forum here, but was related to a win8 or 8.1 upgrade....

I just purchased new Insignia multi-card reader connected to machine, got the windows connected sound, but nothing in the windows exporer pane (what was My computer in XP and Win 7)...went ahead and connected my cf card... still nothing, should show Nikon D3 (all may cards are named for the camera they get shot in ) ... ???

card is a transcend 16gb 1000x ... computer is win 8.1 pro 64bit, 16gb ram, processor: AMD a10-7850KAPU with Radeon R7 Graphics, Motherboard: Asus A88X-PRO

I have never had this kind of trouble and I am NOT liking the win 8.1 at all... ... ... to da** much invested to toss it out and do something different.

A:Help!!! Cf card reader not showing in windows explorer

jUST PLUGGED IN MY D700 AND IT SHOWED UP IN WINDOWS EXPLORER...NO i AM REALLY P.O.ed..... THE CAMERA is a lot older technology then the card reader...dang it!!!!!!!!!

4 more replies
Answer Match 53.34%

My lap top is an Aspire 7730ZG Forced to enter a "Board" so I entered one. Not sure what this board thing is

A:Recently installed Windows 10 , SD card reader (5 ...

try this:ftp://driver.jmicron.com.tw/CardReader/Windows/JMB38X_WinDrv_R1.00.76.01_WHQL.zip

1 more replies
Answer Match 53.34%

i have recently updated to windows 10 on  my presario cq57 and now the card reader will not recognise any sd card. Can't find where to update drivers.

A:have updated to windows 10 and now memory card reader will n...

Hi: The only suggestion I can offer would be to try the W10 Realtek card reader driver directly from Realtek. Download, unzip and run the setup application file from the first driver on the webpage below... http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...

1 more replies
Answer Match 53.34%

Hello !

I have a Dell Inspiron 1525, running Windows Vista Premium 32 bit and my card reader is not working.

The problem is:
When I insert the SDcard the system recognizes that I have a SDcard inserted in the slot because the "safely remove software" icon appears in my toolbar. If I click in it, I can see its properties like Volume's name and capacity as well the message "This device is working properly."

However when I open "My computer", there is no card shortcut in "Devices with Removable Storage", there is only the "DVD RW Drive"'s shortcut.

When I insert my SDcard in a USB adapter to read it , it works properly.
So, the problem is not the card !!

I tried to update my SD memory card with the "Update Driver Software - SD Memory Card" but the message I received is: "Windows has determinated the driver software for your device is up to date. "

I don`t know what more I can do, please help me with this problem.

Thank You
Kary

A:Error using Card Reader and Windows Vista

I recently noticed the exclamation point next to the WPD FileSystem Volume Driver under Device Manager. When I double click on it, the error code is:
This device cannot start. (Code 10)

Is this the problem??
How can I fix it ??

Thanks !!
Kary

1 more replies
Answer Match 53.34%

I Recently installed windows 7 on my Sony Vaio VGN-N170G and now my internal card reader Dossent work! it used to work with XP! any Help?

A:Internal Card Reader Not Working on Windows 7!

Try updating drivers from here:

Sony eSupport - VGN-N170G/T - Software Updates & Drivers

3 more replies
Answer Match 53.34%

Ever since I upgraded to Windows 10 in Fall 2015 my computer will no longer read the SD card from my camera.  I have found suggestions for a fix for HP Notebooks here but will this work w/ my PC?     http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/SD-Card-Reader-Doesn-t-Work-Afte...                         Suggestions are greatly appreciated!

More replies
Answer Match 53.34%

I have just tried to put on some pictures on my Acer laptop.

The memory card reader is not being recognised by the Windows 7. Never had any problem with XP.

Have also tried connecting direct by cable from the camera. Also not recognised.

Can anyone kindly assist without being too complicated.
 

A:Memory card reader not recognised by Windows 7

9 more replies
Answer Match 53.34%

My lap top is an Aspire 7730ZG Forced to enter a "Board" so I entered one. Not sure what this board thing is

A:Recently installed Windows 10 , SD card reader (5 ...

try this:ftp://driver.jmicron.com.tw/CardReader/Windows/JMB38X_WinDrv_R1.00.76.01_WHQL.zip

1 more replies
Answer Match 53.34%

Hello,
Can I create a Windows installation image and put it on an SD card and then using the laptop's built in SD card reader to install Windows from there if ever needed?
Thanks

A:Can you install windows using the Laptop's SD card reader?

Don't think so... I have never seen a bootable card reader before.

Why not just create a bootable flash drive? Just as convenient
UEFI Bootable USB Flash Drive - Create in Windows

6 more replies
Answer Match 53.34%

i bought a new sdhc card reader for my sdhc 4gb card,, on inserting ,, The windows 7 neither detect nor appeared as removable disc on my computer,, although all the driver softwares are up to date.....

A:windows 7 not detecting sdhc card reader

Hi prateek133,Welcome to the forums, Have you tried the sdhc card reader in a different PC? It is not uknown for a new device to be faulty !! Was the software supplied with the reader ?

4 more replies
Answer Match 53.34%

Memory stick is not recognized

More replies
Answer Match 53.34%

I?ve seen similar topics but not for the specific H520 model or any H models. The SD card does not show up under Disk drives in Device Manager. There is an Other Devices with ! Unknown. Amazing the number of Windows 10 PCs out there having SD card reader problems.

A:H520 SD card reader not working after Windows 10 u...

Welcome to the Lenovo Community !
 
After the Windows 10 upgrade did you install the Chipset Driver for your model and Windows 10.  If not, here is a link to that download....
 
http://support.lenovo.com/us/en/products/Desktops-and-all-in-ones/Lenovo-H-Series-desktops/Lenovo-H5...

5 more replies
Answer Match 52.5%

Brand new desktop with Windows 10 - sd card reader not working.  Have attempted to download drivers - still no go.Any ideas

More replies
Answer Match 52.5%

Prior to upgrade to Windows 10, this machine was running Windows 7 Ultimate without problem.  I frequently use the SD Card reader in the machine to upload Photos I have taken with my Camera.  After upgrade to Windows 10 the machine does not recognize the very same SD card.  I have contacted Microsoft windows 10 support about this problem.  They poked around in the machine and had no answer. I think an appropriate driver is needed from HP to make the SD Card reader in the machine work.  Please help! I am using a work around now.  I use an SD to USB adapter to load my photos but this is not the way the process should work. Again, please help!

A:SD Memory Card Reader does not work after Windows 10 Upgrade

Hi @krmiller?, I checked the support page for your computer, and I only see Windows Vista and Windows 7 drivers, no Windows 10 (not even Windows 8). Your computer was released in June 2009 -- it will probably not get updated drivers for Win10. From HP Desktop PCs - Upgrading to Windows 10: If you purchased your computer prior to August 2013, HP has not tested or developed drivers for your computer model. Some features might not work, or the installation might not be successful.HP provides Windows 10 compatible software and updated drivers to support only specific computer models. If the SD card reader issue is the only problem you're having after upgrading, believe me, it could be worse. The USB card reader you're using now as a workaround is probably the best solution. If it's enough of a deal-breaker for you, there is an option to go back to Windows 7 as long as you're within the first 28 days of having upgraded -- instructions are at the bottom of the upgrading document. 

6 more replies
Answer Match 52.5%

Hi ,I am trying to read my sony macro stic duo sd card of mach four through my inbuilt multi format sd card reader in my notebook but it doesn't shows any notification in the window please help me to solve this issue

A:Inbuilt card reader doesn't shows up in windows

@viyncandy? Try installing this. http://ftp.hp.com/pub/softpaq/sp69501-70000/sp69610.exe REO

1 more replies
Answer Match 52.5%

Can someone give me a link to update the SD Card Reader for my ProBook 4540s?

A:SD Card Reader Doesn't Work After Windows 10 Upgrade

 Hi, Install  Micron Media Card Reader Driver: JMicron Media Card Reader Driver (International)

2 more replies
Answer Match 52.5%

Hi Where can I find this HP Keyboard Card Reader driver for Windows 10 1511 64-bit  

More replies
Answer Match 52.5%

Ok so I bought two Toshiba computers at the same time back in June of 2013 I think and one of my computers updated to 8.1 automatically with no problems however this computer is not. When I go to the app store where it says I need to update it, it goes to download it then restarts the download 3 times then says that it will not work. I have tried this so many times over a year. I downloaded the update assistant and it runs and tells me there is a problem with my realtek card reader so I follow the instructions to download a new one. I have tried all on the page, I've tried updating re-installing uninstalling and anything else I can think to do with it but it is still not working. Even when I deleted and uninstalled the reader the assistant still said there was an error with it. I am not sure if this is why it will not update but it is getting on my nerves is there anything you can help me with?
 

A:windows 8.1 update error realtek card reader.

10 more replies
Answer Match 52.5%

Hi all-I have an older HP Pavilion zt3349cl that just keeps going. I installed Windows 7 on it and now when I put a sd card in the reader(built in) it wants to try and format the card-the card has pics on it. Card will work fine in another computer. Any ideas?

A:Card Reader Stopped Working After Windows 7 Install

  
Quote: Originally Posted by adamlight


Hi all-I have an older HP Pavilion zt3349cl that just keeps going. I installed Windows 7 on it and now when I put a sd card in the reader(built in) it wants to try and format the card-the card has pics on it. Card will work fine in another computer. Any ideas?


Have you went to HP's website to see if there is an updated driver?

HP Support & Drivers

6 more replies
Answer Match 52.5%

Ricoh Bay 8 smart card reader not working after windows 10 upgrade.Hi,Can anyone made some suggestions for a work around to this problem?

A:Ricoh Bay 8 smart card reader not working after windows 10 u...

Hi: The only suggestion I can offer would be to install the W7 driver for the card reader system which includes the Ricoh Bay 8 Controller. This package contains the Ricoh Media Card Reader Driver for the supported notebook models and operating systems. The Ricoh Media Card Reader driver provides support for the following media: Memory Stick, xD-Picture Card, MMC, SD, and SmartCard. ftp://ftp.hp.com/pub/softpaq/sp46501-47000/sp46972.exe

1 more replies
Answer Match 52.5%

So I took advantage of the free upgrade to Win10 (in case I ever decide to switch), and immediately downgraded back to Win7.

When I insert a card it just doesn't do anything, no notification or anything. The only way I can get the built in card reader to work is by disabling it and re-enabling it in device manager.

It's enabled in the BIOS. It shows up in device manager. I've tried the drivers from Lenovo's site, tried the ones from Realtek's site and pretty much everything else I could find in searching. Nothing else has changed program wise that may interfere with it, that I can find. Not used for gaming or anything like that, just MS Office programs and a few other basic programs for work, but they have all been installed for a couple years at least.

Laptop:

Lenovo Thinkpad Edge E530c
Windows 7 Ultimate x64
Intel Core i7-3820QM
256GB SSD
1TB HD

Card reader has the P/N LS-8135P on it.

Any help would be much appreciated.

More replies
Answer Match 52.5%

I bought a multifunction card reader (5.25 inch bay, 3 USB ports, SATA port, multi card, and sound) and installed it as I have numerous other hardware. Here is the problem, the computer boots but then hangs after it detects my hard drives. I can't get into the BIOS or anything.
However, when I unplug the USB multifunction connector that connects the device to my motherboard and reboot, the computer reboots into windows. Once Windows is loaded, I can plug the USB connector back into my motherboard and the multifunction reader works as it should (no prompts for drivers). Now, when I restart the computer, it hangs again after it detects my hard drive. Unplug the UBS motherboard card reader connector and reboot and it boots fine. I have tried my four USB motherboard ports/connectors and the same thing happens. Any ideas?
 

A:Windows XP wont boot with new multifunction card reader

7 more replies
Answer Match 52.5%

I have a Delkin Devices Pocket Reader 9. When I install the reader the New Hardware Wizard comes up and during the driver installation a dialog box pops up saying it needs an Install file from the disk. With the reader I downloaded the driver from the website so there is no disk. I tried using the Windows XP installation disk as well but nothing happens. Any ideas?
 

A:trouble installing film card reader in Windows XP

What the name of the file it is looking for?

Some times you can tell it: C:\Windows or C:\Windows\SYSTEM32

to get it to work.
 

2 more replies
Answer Match 52.5%

Hi,

My system info:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, x64 Family 6 Model 15 Stepping 11
Processor Count: 4
RAM: 3069 Mb
Graphics Card: NVIDIA GeForce GTX 550 Ti, 1024 Mb
Hard Drives: C: Total - 153499 MB, Free - 91080 MB; D: Total - 323233 MB, Free - 177993 MB;
Motherboard: Dell Inc., 0YU822
Antivirus: Microsoft Security Essentials, Updated and Enabled
---------------------

I recently installed Windows 7 on my Dell XPS 720 desktop computer because of no more support from Microsoft for the XP operating system. This computer came with XP.

After installing Win7, my card reader no longer works. It was normally displayed in My Computer as four removable disks with appropriate drive letters. When I inserted a SDHC card a small light next to the drive slot would illuminate and a window popped up offering me to open the card.

Now I only get one removable disk drive display (Drive E) and when I insert a ScanDisk SDHC Card it will not read it or open it. I just get a message to insert a Disk into Drive E. I have tried four different SDHC Cards that previously worked and now, none of them will load.

I have downloaded drivers from Dell that I believe control the card reader but they will not install because they specifically state the drivers for for the XP operating system. I can't find anything on Dell about drivers for Windows 7 oper... Read more

A:Solved: Help! Installed Windows 7 - now card reader does not work

7 more replies
Answer Match 52.5%

flash drive or any card reader is perfectly working in windowx xp but when i insert in my windows 7 it show drive is not formated .

then I formated on windows 7 it works but when i restart windows 7 it again show flash drive is not formmated .
every time i restart windows 7 it does not open flash drive or any card reader and show drive is not formated . at the same time when i boot in windows xp they all work perfectly in windows xp . what to do within windows 7 to solve this problem

help

A:flash drive or card reader working in xp but not in windows 7 help

Hello saif, welcome to Sevenforums

Could it be that both those devices (though I doubt it with the thumb drive) were made specifically for XP and there is a compatability issue?

Allow me to look some things up for you. please Fill out your specs - this tool may help you with that.

Also, type "devices and printers" into the start search and click the first program at the top. Then type "device manager" into the start search and click the first program at the top. In both of those windows, please let me know if you see any exclaimation marks near any of the devices.

5 more replies
Answer Match 52.5%

I am not a computer tech or anything of that sort, so please bare with me.

I have a Sony VIAO (VGN-FZ140E). I just recently upgraded from Vista Home Premium to a 7 x64. I am fully aware that MANY other people have been having the same problems (plus camera and touchpad issues). I scoured over the forum/internet, found drivers, but am still having issues.

I tried installing the Vista Memory Card Driver - to no avail (I had heard some drivers were still compatible, so I gave it a try).

I found a driver that was named "Memory Card Reader Writer Driver (TI) 2.0R - 2.0.0.19" installed it but that didn't make it work. I even tried rebooting my computer (and also reinstalling the driver). I've read that other people have installed this and it has worked. Am I just doing something wrong? Am I missing a step?

When that didn't work, I found a link on this forum that lead me to another zip file, containing all of the laptop's drivers: ftp://ftp.vaio-link.com/PUB/VAIO/ORI...z1_drivers.zip. When I opened that file, there was no "setup" or "install" application under the folder listed as "Memory Card Reader". I looked in other folders and there were "setup/install" apps.... so I'm confused as to why this folder did not have it.

I am running out of options (and patience for that matter). ANY input will be greatly appreciated!!!

A:PLEASE HELP!! Memory Card Reader issues after upgrading to Windows 7.

I FIXED IT!!....... for now.

So I went into Device Manager and found the portable devices. I uninstalled the devices (E. Then I reinstalled the driver I had previously downloaded. "Memory Card Reader Writer Driver (TI) 2.0R - 2.0.0.1"

Hope this helps someone else in the future!!

2 more replies
Answer Match 52.5%

I cannot seem to find an answer anywhere. 
I am upgrading to windows 8 and it constantly keeps asking to uninstall the Realtek PCIe Card Reader. I have uninstalled it, let it install itself again once ive restarted the computer, disabled it instead. uninstalled the driver via device manager.
ive tried all I can think of and it still thinks it is there. I dont know where else to look 

A:Windows 8 wont upgrade due to Realtek Card Reader

I had the same problem. I removed the application from Programs and Features and in "Advanced System Settings" found under "System" I went to the hardware under "device installation settings" I made it not install new devices automatically but that still
did not resolve the problem. I went into regedit and did a search from "Realtek" then removed all entries related to the card reader. Let me know if this resolves your problem.

Thanks,

Zach
 

6 more replies
Answer Match 52.5%

Hi! I have an HP Laptop (Pavilion g6) with an internal Realtek PCIE Card Reader in it. Ever since I upgraded to Windows 10, the Card Reader has not worked!*I tried uninstalling & reinstallingthe Card Reader*I tried downloading a new driverI found on the Realtek supportwebsiteCan ANYONE please help me?Thanks,JenBcute

More replies
Answer Match 52.5%

Upgraded from windows 7, card reader not working anymore. Now I have unsolved issues under "device manager"Other devices:--Base System Device--Unknown device I tried from the website:* Ricoh Media Card Reader Driver: g1s902ww.exe* SmartCard Reader Driver for Windows 10: g1xv90ww.exeas well as "Lenovo - Update and Drivers", which shows no driver update needed for card reader. None works

More replies
Answer Match 52.08%

I have been trying to update to Windows 10.  Every time  it says I have to uninstall the Realtek PCIE card reader in order to continue

More replies
Answer Match 52.08%

Just for people who ar facing the same od problem. I have been searching for hoursfor a solution to this problem. If you are facing problems with Cardreaders after Windows 10 Upgrade like SD cards are not recognized, or it is just indicating "local Disk" or in german "lokaler Datenträger"  in Explorer and you cannot access whatever SD/MMC/CF cards you are trying. ACRONIS is the Problem !!!! We are using Acronis for all our customers. So just uninstall Acronis reboot and reinstall it. The Cardreader Problem is gone and everything will work fine.... Hope this helps some folks because it nearly made memad.....

More replies
Answer Match 52.08%

I have a lenovo z51-70 (first and last lenovo i will buy) And until a windows update on thursday 5/12/16 my card reader worked fine and did not cycle detection. But now when i have a card in it every 10 or so minutes the sound for the ejection and connection of the card will occur. I thought i fixed it by reloading the readers drivers but it continues to do so...

Is my sd card dying? Or did win 10 f-up and destroy my card reader...

to be clear when it happens the sd card does not disappear it remains and did not interrupt transfers...
 

A:Recent windows 10 update caused issues with sd card reader.

Lunas said:





I have a lenovo z51-70 (first and last lenovo i will buy) And until a windows update on thursday 5/12/16 my card reader worked fine and did not cycle detection. But now when i have a card in it every 10 or so minutes the sound for the ejection and connection of the card will occur. I thought i fixed it by reloading the readers drivers but it continues to do so...

Is my sd card dying? Or did win 10 f-up and destroy my card reader...

to be clear when it happens the sd card does not disappear it remains and did not interrupt transfers...Click to expand...

Can you roll back to before the update? That would confirm if it's the update itself or the reader.
 

2 more replies
Answer Match 52.08%

I have tried inserting and browsing files on SD cards using the SD-MS/Pro-MMC-XD slot built into the front of my laptop. After about five minutes, Windows Explorer freezes, and the computer crashes. I have not lost any data yet, but I don't want that to start any time soon. Can you help me with this?

Additional info: When I browse the SD card through an intermediary USB device (i.e. Canon FS200), everything works as expected.

A:HP Pavilion dv3-1075us - SD Card Reader crashes or freezes Windows 7!

Please post this info: http://www.sevenforums.com/crashes-d...tructions.html

2 more replies