Tech Problem Aggregator

Ordering a Intel Centrino Wireless-N 1030

Q: Ordering a Intel Centrino Wireless-N 1030

I'm trying to replace a faulty wireless card and I can't figure out for the life of me where to order a new one. 'HP Part Surfer' doesn't return anything. I'm also not entirely sure where the part number on the wireless card is, all I can really see that might be it is a 'PNOP' number.Thanks in advance!

A: Ordering a Intel Centrino Wireless-N 1030

Dear Customer, These are the Wireless cards supported by the unit. Intel Centrino Advanced-N 6230631956-001.Intel Centrino Wireless-N 1000593530-001.Intel Centrino Wireless-N + WiMAX 6150633817-001. Also please check the below link having the complete guide of your unit.http://h10032.www1.hp.com/ctg/Manual/c02842252 I recommend you to Contact HP Support over the Phone for further assistance. Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

1 more replies
Answer Match 87.9%

Hello,

I sent my computer in for repairs a while back and now the wireless card won't work. It can't find any signals unless I plug in the one from my desktop. I went to computer/properties/device manager and saw that the wireless card (Intel (R) Centrino (R) Wireless-N 1030) has a yellow "!" next to it. The properties tab says, "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)".

I have tried searching for new drivers automatically but it says they are up to date. I downloaded the latest drivers directly from Intel and tried to manually update them but it said that the drivers are up to date again. This problem occurs whenever I update my computer. I did a system restore and it worked fine for about a month, but once it updated it did the same thing again. There is no restore point to go to this time, so I'm stuck.

Anyone know what I should do?

Thanks

More replies
Answer Match 87.9%

I need to upgrade my wifi card from the intel Centrino Wireless-N 1030.  I checked the manual and it says a cards i can use, but then i see that card won't work on hp.  Can someone please tell me the exact card I can use that is an upgrade from the 1030 as all that wifi card has done is give me issues.  My laptop is a hp pavilion dv7-6c60us.  The OS is windows 7 64bit.  This whitelist crap makes everything a pain in the butt!!! 

A:I need to replace my intel Centrino Wireless-N 1030 wifi car...

Hi, Your machine was built before second half of 2014 therefore the chance to upgrade wireless card is very slim to none. There is a list on pp 6 and 7 of the following manual:           http://h10032.www1.hp.com/ctg/Manual/c03099448.pdf You can use USB wireless adapter, this will cost you one USB port       http://www.officeworks.com.au/shop/officeworks/c/technology/networking/wireless-usb-adapters     (Note: much cheaper from other countries). Regards.

1 more replies
Answer Match 87.9%

Hello,

I'm having a strange problem. Intel released new drivers to update from version 15.11 to 16.11. I downloaded them from Intel website, ran install, success. When I go into Device Manager to check on the driver version, I see it is still 15.11. I have tried a number of things, including deleting the drivers from the Device Manager and running the install again. However, in this case Windows 8 automatically installs even older drivers, version 14, dated 2011. I'd like to try the new drivers because it takes very long for the net to comeback after I wake up my laptop. Version 15.11 was installed by Windows Update, those drivers are dated January 2014.

A:Drivers update for Intel Centrino Wireless-N 1030

Just disable allowing Windows to automatically install drivers.

8 more replies
Answer Match 87.9%

This card supports 802.11n. Obviously... it's right in the name, plus device manager>network adapters>Intel Centrino>Advanced tab clearly shows n enabled.

But can anyone take a second to tell me, if you know, why when I run the command netsh wlan show drivers, "radio types supported" shows only b and g, and NOT 802.11n ??? Confusing to me.

A:Intel Centrino Wireless-N 1030, CMD prompt question

that is odd but if your connected using N and your drivers are up to date i wouldn't worry about it.

1 more replies
Answer Match 87.9%

I have a relatively new (few months) laptop of my own running Win7 x64 with an "Intel Centrino Wireless-N 1030" wireless network adapter. For some reason, I have serious problems connecting to most wireless networks. On my home network there are rarely problems, but when I attempt to any other network (college, or public hotspot, or neighbor's open wireless) there are often issues.

By "issues" I mean: when I first attempt to connect to the network in question, I'm usually able to connect to the first few sites I try to access, but usually after a second or a minute or a few minutes of normal connectivity, I'm suddenly unable to access anything. The browser's response is that DNS lookup has failed; when I record an IP address (via ping-command prompt) and type it in manually after this point, the browser's response is that "##.##..." is taking too long to respond, etc..." No other program is able to connect either. I have tried setting different DNS servers but it has had no visible effect. At this point, the only thing I can do to reconnect is to either wait a long time for the connection to reestablish itself (which can take an hour or more and isn't guaranteed) or to go to Device Manager and disable and reenable the wireless adapter, which then *sometimes* allows me to reconnect for a few seconds or a minute or an hour before connectivity breaks again. When the connection fails, Windows displays the computer ... Read more

A:Unreliable connectivity - Intel Centrino Wireless-N 1030

I had the same issue too. My GF's laptop has a 1030 wireless NIC and it had all sorts of issues connecting to the APs in my house. It would work fine with her Linksys wireless router and my Sprint MiFi. But had connectivity/performance problems when connecting to either of my Netgear APs (WG102 and WNDAP350) along with my PC W 620 wireless controller with AP 105 and AP 125 access points. Updating the drivers helped the problem somewhat, but we were still experiencing dropped packets or extremely high latency when connected. Upon a suggestion from one of my coworkers, I tried adjusting the performance/power settings in Windows and that seemed to have fixed the problem. The laptop has been running fine ever since.
 

1 more replies
Answer Match 86.4%

I saw some people having trouble with extremely slow wireless connections using an Intel Centrino Wireless n-1030 card. The original thread is closed, so the problem may already be solved, but if anyone is still experiencing this problem, here is what worked for me:

This NIC is a dual band card (802.11 + bluetooth), and with some routers having the bluetooth enabled really slowed down the 802.11n connection (it didn't seem to happen with my netgear router, but when I switched to linksys, WHAMMO!).

Anyway, when I disabled the Bluetooth adapter in Device Manager the problem was completely solved (uhhhh except I need to use a dongle to make my bluetooth mouse work now... small price to pay IMO)

Anyway, just thought I'd share my experience. Hope it can help someone.
 

More replies
Answer Match 84.84%

I noticed my wireless 1030 is acting strange after getting BSOD(not the cause of Wireless but it was solved)and now I'm experiencing some problems, here are the issue. I'm worried if it is the NIC card

1.like it takes a while to connect to a certain webpage then whenI looked up on Event viewer it stated in the lines of Google too long to respond DNS

2. sometimes the wireless would switch off by itself and when I try to reconnect to my home router it says "Cannot find my router* yet I can see it shows my wireless router is available then when I look up event viewer it states " NETBIOS over TCPIP has entered Stop state".

I would have to click on

*Troubleshoot Problems which then would let me reconnect back in the router*

3. I have been getting this new event viewer error 5060:
The description for Event ID 5060 from source NETwNs64 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\NDMP32
Intel(R) Centrino(R) Wireless-N 1030
I can see my network information by typing ipconfig/all BUT recently I performed a Intel? PROSet/Wireless Software Manual Diagnostics Tool and it failed on "Radio ON test" yet my wifi switch was ON. I... Read more

A:I'm having wireless Issues with the Intel 1030,Turning off by itself

It almost sounds like a nic driver issue. Have you updated it recently? Try to update, or roll-back if update did not work.
Replacing your nic should not be to hard depending on your device. Usually the nic is the easiest of the add-on boards to get to. But, I really don't think it's the nic. Were you changing, installing, updating anything with your hardware, operating system when this happened? If driver update/rollback doesn't work, try a system restore if feasible.

4 more replies
Answer Match 83.16%

Hello everyone, I have been trying to get my wireless working on my Dell Inspiron n5110 on Windows 7 64 bit to no avail. In device manager I have the error "code 10 this device cannot start" I have tried almost everything so far. Reinstalled drivers multiple times, with multiple versions. I have replaced the adapter even though I knew it was a software problem because the wireless works on a live boot Ubuntu and as a last resort I have reinstalled Windows and installed all the proper drivers but still nothing. Any thoughts on what I could be missing or some suggestions?

A:Centrino-n 1030 driver issues

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

8 more replies
Answer Match 81.06%

I have been having issues with my wireless adapter (Intel(R) Centrino(R) Wireless-N6150). it has been a few weeks that this problem has been occurring. The adapter will all of a sudden disappear. Initially I would just scan for hardware changes in my device manager and that would do the trick but now it does not. So there are days I start my computer and the wireless adapter is no where to be found. Troubleshooting does not solve the problem. Also I browsed through the internet and i saw that people who were having this issue they would disable there 802.11n Mode that helped for a few days but it has started to fail again. Now for the past 2 weeks also I have had three crashes, sometimes by restarting the computer the wireless adapter would appear again and so on three separate occasions I tried restarting the computer but it failed to shutdown and I got the Blue screen of death. (it said driver power state failure)

Does anyone have any information as to what I can do to fix this problem. Can anyone please explain what is wrong with my laptop? PLease any help is appreciated.

A:Intel(R) Centrino(R) Wireless-N6150 failure! PLease HELP!

The program rundll32.exe version 6.1.7600.16385 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1ae8
Start Time: 01cf35b80539394a
Termination Time: 0
Application Path: C:\Windows\System32\rundll32.exe
Report Id: 92cc7ea3-a1ab-11e3-a21e-5404a633b6b9

this is the event log I got from the error log after the latest BSOD. I dont know if it is related to the adapter problem but like i said, i tried to restart computer after the wireless adapter had been lost and then the computer did not shutdown.

2 more replies
Answer Match 81.06%

hi everyone, i am having problems connecting to the foxtel hub media wireless connection on all of my laptops, i am able to see and connect to the foxtel hub which is a 2.4ghz ssid but not the 5ghz connection,all  my ipads and phones connect to the 5ghz wave length. I have read some forums here and i can see that bi have the correct network driver to be able to see the 5ghz wave length, please help.

A:my intel(R) centrino(R) wireless-N2230 with protocol 802.11n...

Hi: The Intel 2230 wireless card is a single band (2.4 GHz only) card. Specs below...see the info next to Bands http://ark.intel.com/products/66889/Intel-Centrino-Wireless-N-2230-Single-Band More product info on that card... http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/centrino-wireless-n-2230-...

1 more replies
Answer Match 81.06%

Hello all,

My friend is having trouble with her laptop. Specs:

Lenovo Laptop
Windows 7 Home Premium x64
8.0 GB RAM
500 GB HDD
Intel Centrino Wireless N 1000

She has been having issues for the last few days where her computer will lose internet connection. Her other devices such as her iPhone still work properly on the WiFi. Only the laptop is affected. She says it seems to happen after a half hour so of usage. She has to restart to get it to work again.

I used TeamViewer to remote into her computer and looked at it. It didnt look like anything was out of the ordanary. I ran virus and malware scans, ran sfc /scannow to make sure it wasnt Windows corruption. All of those came back fine. I try to update the driver, but the driver installer will show a screen for about 5 seconds, disappear never to be seen again. Which kinda leads into the next problem.

There are certain files and applications that will not execute on her laptop. They will show the error:

<file path> is not a valid Win32 application.

It seems to be random. I can download one file and it will say that, but the next one will be fine. It doesnt seem to have any rhyme or reason to it. Because of this I cant get the drivers to update, so it seems that I will have to fix that issue before anything else.

Any ideas on this one?

A:Intel Centrino Wireless N 1000 Issues

The problem might be with the laptop, but the solution might be with the WAP - Wireless Access Point (router?).

You might check to see what channel the WAP is using and if it can be set to use one protocol (as opposed to b/g/n).

See the bottom of this post...
Basic Requirements Before Posting your Networking Thread
...for info on the Xirrus app.

Once the connectivity issue is resolved, we can look into the file execution (corruption?) issue.

1 more replies
Answer Match 81.06%

Just updated to Windows 10 from Windows 7, everything ok except Wireless. I searched everywhere, but nothing, anyone can help me please?
 
 
Mod's Edit: System model added to front of Subject line to improve visibility / clarity.










Solved!
Go to Solution.

A:V570 - Intel(R) Centrino(R​) Wireless-N + WiMAX 61...

hi Hermes101,
 
Welcome to the Forums.
 
You didn't mention the model of your lenovo PC but if you look into the Device Manager > Network Adapters, does it show the Intel Wireless 6150 adapter or do you see both the wireless and WiMax driver in the Other Devices entry?
 
 - Sample image
 
If the WI-Fi adapter is not present in the Device Manager, can you try to install this driver (this is for Win8.1 but it should work on Win10).
 
Intel® PROSet/Wireless Software for Windows 8.1
Version: 16.11.0
Size: 90.83 MB
 
 
 
Let me know how it goes.
 
Regards

4 more replies
Answer Match 81.06%

I can't enable my laptop wifi on

I am getting this error "The Intel(R) Centrino (R) Wireless-N1030 is experiencing driver- or hardware- related problem"

though I have installed the drivers too, but again I am getting this error
any idea

thank

A:The Intel(R) Centrino (R) Wireless-N1030 is experiencing

Hi Can you please Post your System Specs ...The Link below will help you achieve this ...
System Info - See Your System Specs

4 more replies
Answer Match 80.64%

I have a dell insprion 17r n7110. I just put a new system on the LT and win 7 untima x64. In my device manager it says I have an intel centrino wireless- n wi max 6150, but it does not have a driver for it. I really do not know what it is...I think it is my wireless card. Any how I went to dell to find the driver for it and I cannot find a driver for those numbers/model. If it is a wireless card what should it be for my model and which driver do I need to make what ever I have in there work. Slowly I am putting all the drivers in place. Is there a program that will tell me what devices are installed or better yet I tried to get the data from dell and it is very elusive.
Can some kind soul point me in the right direction
Kas( my imitation of Miley Cyrus)

A:What do I have...a wireless device??? intel centrino wireless - n

Its a kind of wireless network thing. Sometimes its a little troublesome to install also, so persevere. If I'm not mistaken its a intel "in-house" wifi. Don't think I've ever had use of or for it myself. (But I do keep its driver(s) updated ) You can find it here :https://downloadcenter.intel.com/default.aspx

or here : https://downloadcenter.intel.com/Sea...&FamilyId=1783

Here's what intel says about it : http://www.intel.com/support/wireles.../CS-028904.htm

3 more replies
Answer Match 80.22%

The wireless connection intermittently disconnects when using Microsoft Windows 10 I can't find any new driver for Windows 10 - 64bit.  Please can you help?

More replies
Answer Match 80.22%

Looking for UPGRADE SUGGESTIONS for the wireness adapter in the HP Envy dv7 Notebook PC.  The current adapter is Intel Centrino Wireless-N 2230. We now have a 5 GHz router but this wifi adapter is only compatible with the 2.4 GHz frequency.  Suggestions for WIFI ADAPTER REPLACEMENT that will work either with only the 5GHz frequency or with both (2.4 and 5GHz)?  

A:intel centrino wireless-N 2230 adapter upgrade

@SimFun01? To better help you we would need the exact model number or product number of your laptop/desktop??? http://support.hp.com/us-en/document/c00033108 REO

1 more replies
Answer Match 80.22%

Hi All, My Network cards work in low mode, It works but Lenovo Solution Center signals a local connection trouble, the Wifi connection is very often interruped, my network hard drive can't be recognize properly. Protocols are missing in the card "network management parameters cf capture..? So I tryed to resinstall drivers, update them with intel drivers utlity , try to repair winsock,  TCPIP, rebuild by the DSIM.exe procedure..(failed at 20 %)I'm lost !Why can't a Lenovo T430 U update with Windows 10 64 bits work with the intel card ? Thus, there is no lenovo recommanded drivers for windows 10 !Thank you for your ideas and help suggestionsRegardsPhilippe, Paris, France

More replies
Answer Match 80.22%

Hello all, I am having issue enabling the 802.11n settings for my WiFi card that is supposed to have N grade (300 Mbps) capabilities. The card standards are 802.11b/g/n. According to Intel's white sheet for the Intel? Centrino? Wireless-N 1000, it should be able to utilize the N grade WiFi speed capabilities. However, I'm not seeing the setting available in the Advanced settings of the driver. The attached screenshot shows that there are only b & g settings available. This is most inconvenient because my internet speed was just upgraded to 105 Mbps & I'd like to at least enjoy a little. I'm not getting anything above 50 Mbps. Is anyone else having this issue?

A:Where Are The N WiFi Settings For Intel® Centrino® Wireless-N 1000?

It's the same for ALL Intel WiFi products. Wireless Mode for Intel is basically using ABG, BG, AG, A, G, and B modes only. (see screenshot)



For Centrino series, there's a menu called "802.11n mode" and from there you can use it to enable or disable WiFi N

For 7260 series, it is called "HT mode" and if you disable that, the NIC will refuse to connect to N network and will operate on G or A.

FYI, there's a difference between what Windows say on the connection rate and the actual rate. The actual rate depends on RF environment, walls between the computer, antenna gain, and power management. The best actual speed you can get is around 40 - 50 % of the speed reported by Windows.

Getting an actual speed of 50 Mbps means that you're already connected to WiFi N. I might guess that the connection rate reported by Windows is probably 144 Mbps. 50 Mbps is close to the maximum actual throughput of 70 - 75 Mbps. You can change the settings on your router to "force" 40 MHz channel width on the 2.4 GHz band and then set the "802.11 Channel width for 2.4 GHz to" "Auto" to allow the adapter to use 40 MHz channel width.

If successful, this should give you 300 Mbps reported connection rate and around 130 - 180 Mbps of actual speed. Therefore, your 100+ Mbps internet speed should be covered provided that your environment has little to none RF interference and the laptop is within line of sight of the router.

9 more replies
Answer Match 79.38%

I currently own a HP dv6t-6b00, Product Number QJ920AV#ABA Laptop with Bios F.1b 10/23/2012 and theINTEL Core I7-2820QM. My WiFi adapter is an Intel Centrino Wireless-N + WiMAX 6150. The computer came configured with Windows 7 Pro. A few weeks ago, I got the free Windows 10 Pro upgrade, and now I can not connect to any wireless networks.I tried to update the drivers of my Wimax 6150 but I received a message saying that Windows 10 does not support any drivers for that adapter. I contacted both HP Support and Windows support unsuccessfully.Is there any Wireless network adapter (White listed or not) that I can use in my dv6 with Windows 10? Or,Are there any drivers that are supported by Windows 10 that will work with my current wireless adapter?Thanks in advance to anyone that can help!! 

More replies
Answer Match 79.38%

i have an HP pavilion m6-1045dx laptop with the specs:
intel i5-3210M processor
8gb ram
windows 7 64bit OS

obviously, i have an intel centrino wirless N-2230 as the wireless NIC. a few days ago my hard drive failed and needed repair, i managed to replace the hard drive but came a long this problem. whenever i would play my PC game (league of legends), my ping would register at 800-2200 pms i need help.

note: the wirless NIC worked perfectly fine with prior to the hard drive crash other than dropping the network when there's too much users on the router.

A:Intel centrino wireless N-2230 having slow connection speeds

If your router is dropping network when there's too much users, it might be overheating or overloaded and that your Wireless NIC might not be the problem at all. Playing 3D games that require online multiplayer is very demanding for a router that is not "high performance" capable. It might be the case where the router is overloaded when someone is playing an online multiplayer 3D game while others are streaming HD or using a Skype call VOIP all at the same time. You can try unplugging your router for 30 seconds and plugging it back in and see if ping spikes are gone.

3 more replies
Answer Match 79.38%

I just recently did a Windows update and somehow it destroyed my wifi connectivity. I have tried to do system restores back a few days prior to the update to NO avail. I have removed and re-installed or attempted to install the hardware and the software several times. I have downloaded Intel Driver Update Utility to help me install the drivers for the network adapter to no avail. I am not sure what happened but I definitely don't know how to correct this problem.

I have tried so many steps I can't even remember half of them. Most of the times that Intel has done a download, it comes back as Failed and then when I reboot laptop it says installation incomplete (or something like that).

Thanks for your assistance in advance.

A:intel centrino wireless-n 1000 (Unable to connect) NO wifi

Hi ... Welcome to Seven Forums ... Does the Wireless Card show in the Device Manager with an exclamation mark beside it ? ...
What is the exact Model Number of your Laptop ? ...
Have you tried the Driver from the Manufacturers Website ? ...

7 more replies
Answer Match 79.38%

Hello there everyone,I am experiencing a strange problem with my y510p. I can properly connect to the internet via wifi, I have sorted out a few config problems which prevented me from connecting, but recently I am getting worried by the network card's behavior. I have recently upgraded to Windows 8.1 (I don't think that's the cause of my issue, but just in case). I noticed that my throughput was, according to Intel's PROSet Wireless WiFi Connection Utility, of about 130 mbps on wireless-n, at about 1 meter away (seriously) from the modem, which is clearly able to do high-speed 802.11n, because the model is kind of new. This modem came from the ISP with two different SSID-s active, and it's able to do 4, so I thought that I could merge the two active networks (set the same SSID and settings on both). Then I set 3 SSID-s active (all identical), then 4, then just 1, and I kept testing this way to see if I could get 270mbps. Not a chance, it stayed at 130. Eventually I found the solution. The system upgrade had set the network adapter settings back to 20mhz only, so I set it back to auto and I started to get 270mbps (intermittent speed) again. But... that didn't sort everything out. I was running an Ookla Speed Test and getting normal speeds when I noticed a slight clicking noise coming from the laptop. And it was absolutely NOT the hard disk. I could hear the hard disk making its usual sounds, and the other noise came from another side of the computer. The noise stopped wh... Read more

A:WiFi problem y510p (Intel Centrino Wireless-N 2230...

hi M B.,
 
Welcome to the Forums.
 
That's indeed odd if the clicking noise is comming from the wireless card. One thing that you can try is to re-seat the wireless antenna cables (see page 42 of the hardware maintenance manual).
 
As for the hard drive, to ensure that it's not the one that's making the clicking noise, try to disable the wireless connection run a diagnostic on the drive (i.e. via HD Tune) or put a load on it (i.e. via CrystalDiskmark) and observe.
 
 
Regards

9 more replies
Answer Match 79.38%

Speedtest.net download speed is 3 mbps. The issue is not with the internet as it has been compared to other computers in the house. Fresh install using supplied drivers. Connected using WIFI. Not too far away from internet as my 4 year old laptop gets 3 times faster connection in my room.

Please help - at my wit's end. Custom built a gaming pc and now I can't do anything.

CPU: i5 3470
Mobo: GA Z77n WIFI

A:Intel Centrino Wireless-N 2230 very slow connection speed

  
Quote: Originally Posted by ageo7836


Speedtest.net download speed is 3 mbps. The issue is not with the internet as it has been compared to other computers in the house. Fresh install using supplied drivers. Connected using WIFI. Not too far away from internet as my 4 year old laptop gets 3 times faster connection in my room.

Please help - at my wit's end. Custom built a gaming pc and now I can't do anything.

CPU: i5 3470
Mobo: GA Z77n WIFI


What usually works is to connect using a wired connection then go to the Windows Update Center and install all the recent drivers for your new system, this should install the latest driver for the Intel NIC.

If you want the full 300Mbps this NIC is capable of then you will need to use the 802.11N Only setting in your routers set up page, using the mixed modes will slow your connection speed way down to wireless G speeds of 54Mpbs.

Or you could try using the drivers in the link below.
Intel Centrino Wireless-N 2230 Mini-PCIe Card Win7, Win8 Driver, Utility | Wireless Driver & Software

5 more replies
Answer Match 79.38%

My laptop came pre installed with windows 8 , needless to say I stuck with it for 7 months then decided to go back to windows 7.

I cleared the HD and installed windows 7 today, however I cant get my network adapter to work so no internet.

I have tried downloading the correct drivers but its not working. When I go to device manager I can see the list of devices not working with yellow exclamation mark

Ethernet Controller
Network Controller
PCI simple Communications Controller
SM bus Controller

When I open the network controller up it has Manufacturer Unknown.

The drivers for this device are not installed (code 28)

My laptop is a Lenovo z580 Model: 2151

I appreciate any help that can get me out of this mess.

A:Win7 not working with a Intel Centrino® Wireless-N 2200 (code

Hi Welcome to Seven Forums ... Did you try to Install the Ethernet Controller from the Lenovo Website ? ...

Once you have achieved that run Windows Updates ...

2 more replies
Answer Match 79.38%

Hi, i have upgraded my laptop to windows 10 recently. after upgradation, my intel wireless centrino n2230 card has started connectivity problems. it turns off and donot detects any wifi network where as network is available and can be detected by other devices. i disable and re-enable network device in device manager then it starts working. this connectivity issues happen oftenly. i have upgraded driver through widows 10 as well but issue is not fixed. i have googled this problem and seen that no one has found a permanent and reasonable solution to it so i have decided to replace this wireless adapter with some one that has compatibility with my notebook and operating system as well. please suggest me few device models (both single and dual band) that as compatible with my book and windows 10. since i want to upgrade the card so i would prefer some device with dual band and 2 stream. Thanks..may

More replies
Answer Match 78.54%

Hi there. I'm having an issue with this wireless card on my laptop. I want to add that my expertise level in computers is not high, but I am a little knowledgeable. I would estimate my skill being about a 4 or 5 on a 1-10 scale, but can follow directions well. I also don't often know the tech lingo unless I've read about it online. I will include some of the laptop information below.

To put it simply, I replaced my wireless card in my laptop and I got the Intel 6200 to work, but whenever I restart my computer, or disable and enable the wireless card, it stops working. In order to get it to work again, I go to "device manager", right click, and uninstall it. Then I "Scan for hardware changes" and it works again. Each time I want to use it after my computer is turned off, I have to go through this process, and add my wireless passwords again. Obviously this is a hassle I would prefer not to go through. I'm about to send the card back thinking that it has some problem.

Asus N53SM-ES72
Windows 7 Professional
- 2.2 GHz Intel Core i7-2670QM processor
Previous wireless card: Atheros Model AR58195 (worked fine, I just wanted a better one)

As the Atheros card worked, I don't think this has anything to do with my wireless router, but it is a TP-LINK TL-WDR3600.

Anyway, I appreciate any possible help I can get to prevent my wireless card from stopping upon computer restart! If no one has any ideas, I will just send it back as defective.

... Read more

A:Solved: Intel Centrino Advanced N 6200 AGN Wireless Card Problem

8 more replies
Answer Match 77.7%

My function key for wireless won't work FN + F2 (antenna) Won't activate my wifi.
In 'Change my PC Settings' The WiFi option is just grey and unable to be changed.
All my other function keys will work except for the wifi one :/ Is there any other sort of way I could enable wifi?

Also cabled connections work.

A:Wifi will not work (Medion Erazer x6815) Intel Centrino wireless 1030N

Try updating your wireless driver, check to make sure your WiFi is enabled as well:

To do that, go to: Network and Sharing Center.
Then, click on: Change Adapter Settings.
Check if your WiFi is enabled, if not: Right click on your WiFi and click on Enable.

6 more replies
Answer Match 70.56%

Hi, everybody! I was looking to buy a new comp. but i am unsure which processor is better, the intel centrino core duo or the intel pentium M. I was wondering if someone could tell me what the difference was and possibly which one is better. thanks!
 

A:Solved: Intel Centrino Core Duo vs. Intel Pentium M

G'day myongha!

I would go with the Core Duo because it is more reliable and is quicker because there are two parts to the processor, hence the name Core Duo.
 

3 more replies
Answer Match 65.94%

I have a pentium 4-m processor for my laptop and got it about when wireless access was going to be available outside and such...and i got jealous i was wondering if i can get a new processor for my laptop and use the wireless points, i wanna do this when my comp gets a little old and these wi-fi networks expand
 

A:Intel Centrino

8 more replies
Answer Match 65.1%

Been out of the new computer thing for a few years, but now I need a new laptop. Is there a difference between "intel core 2 duo", and the "intel core 2 duo centrino"? If so what are they?

Also how does AMD compare to the intel stuff?

reagards,
 

A:Intel core 2 duo & Centrino

You'd have to purchase a high end amd cpu to contend with the mid ranged c2d models.

As far as c2d and centrino, the difference is pwr consumption and performance. About 40% with some models.
 

2 more replies
Answer Match 65.1%

Hello, I have a notebook/laptop here w/ the Centrino chip, and says it needs no add on adaptor cards, has LAN (WLAN) capability, also says can connect to wired networks. but my "Q" is do need a wireless router like the netgear MR 814 or is there a special one i need? I just got thru networking w/ netgears Rp614 so this will be of no help would it? thanks..it will be running ..

xp home
intel pent. m
processor 1300 mhz
480 mb ram
 

More replies
Answer Match 64.26%

Hi Folks,

The last computer I have purchased was about 4 years ago so I am a little behind on the technology.

I would like to purchase a Sony laptop to be used for home use, internet surfing and downloading music. It will not be used for gaming.

My question - in general is an Intel Centrino Duo Processor sufficient enough to handle this ?

( Other specs - OS Vista, 3 GB DDR2 RAM, 250 GB HD - DVD Burner.)
 

A:Intel Centrino Duo Processor Question

It will. It won't be the fastest possible, but it will handle general use just fine.
 

2 more replies
Answer Match 64.26%

What is the difference between the Centrino and regular core 2 duo processors? They are both supposed to increase battery life and provide much better performance. Centrino tends to advertise that it is the ultimate mobile processor and best with wireless connectivity. Umm, but you can also connect wirelessly with a regular core 2 duo. What does the centrino have that the reg. core 2 doesn't?
 

More replies
Answer Match 64.26%

Hi I was wondering which is more powerful for a laptop/notebook. Intel Core Centrino duo processor vs. Pentium 4 with hyperthreading. I know they both have different speeds like 2300-2600 for the centrino one and pentium 4 3-3.8ghz but when I asked some coworkers which they thought is better, all said the centrino one because of the powersaving and the duo processor. However, when I search Alienware's site for laptops, the pentium 4 processor computer seems to be significantly higher in price with all other options configured the same. Why would this be if the Centrino duo processor is faster and uses less power? Which is generally a better chip? What would the
Intel Core Duo Processor T2300 1.66GHz 2MB Cache 667MHz FSB
be equivalent to in terms of a Intel Pentium 4 Processor 531 w/ HT Technology for example speed wise? I'm so confused right now. I would greatly appreciate a response! Please forgive me if it's a no brainer.
 

A:Question about Intel Centrino vs. Pentium 4

7 more replies
Answer Match 64.26%

On DEVICE MANAGER I can see this message >>> the device can not start (code 10). what to do to make it run again.........I have tryed but no results......!!! Thank s...

A:Intel(R) Centrino(R) wimax 6250

Hi there .... I take it your Wireless is not working ? There are quite a few things you can try to resolve the issue .. Read the Information in the Link below ..

How To Fix Error Code 10 (This device cannot start)

9 more replies
Answer Match 63.84%

I upgraded my laptop from Windows 7 to Windows 10.  Upgraded the Wireless Network Adapter Driver to the latest version, but still losing connectivity, and some times get the blue screen with the message "driver power state failure".  It looks to me that the Intel® Centrino® Wireless-N 2230, Single Band is not compatible with Windows 10 SW.  I would like to know if HP has an alternative to replace it with a compatible Network Adapter. Thanks 

More replies
Answer Match 63.84%

Electronic recycling or computer recycling or e-waste recycling is the recycling of computers and any other electronic devices. Recycling is the complete deconstruction of electronic devices in order to cut down on mining the raw materials and rather extract the materials from old and obsolete electronics. Obsolete computers and old electronics are valuable sources for secondary raw materials, if recycled; if not, these devices are a source of toxins and carcinogens. Rapid technology change, low initial cost, and planned obsolescence have resulted in a fast-growing surplus of computers and other electronic components around the globe. Technical solutions are available, but in most cases a legal framework, collection system, logistics, and other services need to be implemented before applying a technical solution. For more information please visit the websit of electronic recycle center.
Thanks a lot.

A:Gateway, Windows Vista, Intel Centrino Duo?

Post here and ask Peter (Ex_Brit) to send you the link to the versions of Vista you need, 32 or 64. Include your E-mail address mucked up, like abc at xyz DOT com then edit your post and remove it as soon as you receive the link.

The ISO Peter provides has both SP1 and SP2 applied.

Pick up the Tutorial: How to Download a Vista ISO and Create an Installation DVD or USB here:

STEP THREE
To Create Vista Installation DVD or USB Flash Drive with ISO File

During the install, when asked for the key, don't enter it. You will then be given a menu where you can chose the version you want to install.

Activate once the install is completed.

2 more replies
Answer Match 63.84%

Hi ,i come from Beijing China,my english is bad.
but i very pleased to come here
about drivers for Intel 855,sombody insalled ok,you can For reference

somebody installed 7106 is OK
I instanlled 7000 (DELL 710m)1020 * 800 on desktop,but when used 3D accelerated,my computer shutdown.

somebody's Methods

Please install in strict accordance with this order, or is likely to fall into the death of infinite restart cycle.

1. Do not download the driver after the installation of a direct double-click the SETUP program. Extract the backup.


2. Do not want to install other equipment inside the "video controller", but the installation of the bottom of the "Display Adapter - Standard VGA graphics adapter."

Concrete steps to: Device Manager, right, "update driver software", "Browse your computer to find driver software", "browser" folder backup decompression, the driver software is installed, the next step, (may take longer time , be patient), "off", points "Yes" to restart.


3. After the restart, prompt the lower right corner "is the installation of device driver software", will be installed on the two devices, a "use" another "has been completed, the need to restart.

4. If the previous steps did not make mistakes, then restart the computer again, you can now see that the computer automatically start the 1028 * 768 resolution display or adapt the. Not quite, however, contin... Read more

A:drivers for Intel 855 Centrino Chipse(from China)

Hi leo & welcome to SevenForums,

You may want to download the drivers directly from Intel here Intel? 852/855 Chipset Family - Chipset information and downloads and click the drivers you want (click 'download'). You will find that Windows 7 is not listed as operating system, don't worry, just download the next best thing (XP or Vista).

Make sure you download the EXE version of the file and save it. Next, open up explorer and go to where you saved it and right-click the exe file you downloaded & select properties. In the compatability tab select the compatability you want to use (based on either XP/Vista). Now click ok and run the file, if asked if you wish to install an older driver select yes.

The driver should install with no errors & restart your PC. You can now run Windows Update to allow Windows to install a more up-to-date driver.

Hope this helps

2 more replies
Answer Match 63.84%

I'm running Windows 8 on a Samsung laptop which I've had since April of this year. The wireless adapter is as mentioned in the thread title, driver version 15.5.6.48. Windows update has been telling me there is an update for this adapter. I hadn't acted on it because the adapter is working and I don't see a need to update it right now. It was fine with a Linksys router, never a problem. At my current location, I am using a Netgear router and all was well until I updated the router's firmware. The laptop had intermittent connection drops until I rolled back the router's firmware. (I think the problem is Netgear's firmware in this case, not my drivers.) Since rolling back the router firmware, the laptop has had no connection issues whatsoever.

Today I see that the driver has been downloaded, so I have the warning that it is ready to be installed. I am wondering if I should go ahead and install it. And would I be able to roll the driver back if there are problems?

Edited to add:

I'm seeing this thread:

https://communities.intel.com/message/189189

It looks like I might be better off staying with the driver I have. I guess that's the thing--these manufacturers may make changes to the adapter such that an updated downloaded from anyone other than them (in this case Samsung) may not work. I've never updated graphics or wireless drivers on my other machines (XP and 7), choosing an 'if it ain't broke' approach.

I also see that Windows Update tried and failed twice to... Read more

A:Intel Centrino Advanced-N 6235--update or not?

OK, I know I'm replying to my own thread, but maybe we can mark this as solved. I looked up the error message I was getting related to this update. It was number 0x80070103. I looked that up, and got this:

Windows Update error 0x80070103 - Microsoft Community






This error message indicts that, if you receive Windows Update error 0X80070103 while installing updates, you might be trying to install a driver that's already installed or a driver that might be less compatible than one you already have installed on your computer.



I have decided not to install this driver and I have hidden this update so that Windows stops pestering me about it.

5 more replies
Answer Match 63.84%

I have an older VAIO running Windows 7 32-bit on an Intel Centrino Duo processor. I want to upgrade to IE11 (compatibility issues with some online sites).
I am currently running IE9.
Am I at the point where this Laptop can not be further updated software wise?
Thank-you.

More replies
Answer Match 63.84%

I have a Sony Vaio vpceb24fx with intel core i3 with intel Centrino advanced 6200N wifi and it will not connect to any wifi. I have reinstalled the drivers, Disabled and Enabled the connection and a few other small checks people have offered and nothing has worked. I have updated windows and all drivers and i still can not get it to work. I am at a college with a network that requires your school ID and Password. When I choose the network it allows me to put my id and password in and then it goes through and the windows troubleshooter comes up. It says windows cannot identify the problem.

A:INTEL CENTRINO ADVANCED 6200N and it will not connect

Welcome to Seven Forums,

Can you please post an ipconfig /all output?
http://jeuelsdomeblog.wordpress.com/...g-all-command/

Also, what type of security software do you have installed?

9 more replies
Answer Match 63%

I am trying to set up a fresh installation of Windows Server 2016 as a development machine on my T430, type 2349-H2G. Unfortunately, when trying to install the driver for the Intel Centrino Advanced-N 6205 network adapter to enable wireless LAN, the driver set-up fails with the message: A service installation section in this INF is invalid The wireless adapter worked fine as recently as yesterday on Windows Server 2012, but I am unaware if any special steps were taken to install the driver under that OS as I "inherited" the notebook from a former colleague. Is there any advice you can give about things I could try? I already tried manually installing the drivers from both the Lenovo website (Win10) and Intel website (Win8.1 and 7), but all of them had the same issue. I am a sophisticated user and am not afraid to edit .inf files or somethign similar if necessary, but I don't know where to start. Thanks in advance for any help you might render

More replies
Answer Match 63%

Ok. so I'm trying to install this Intel 802.11bg driver on my Tosh lappy. (I am installing it from a USB Flash drive, since the machine has no network connections.)

I install in XP2 compatability mode, and the report is that the installation is correct. But on restart, "Windows could not find a driver for your network adapter".

Is there a workaround?

A:Installing network adapter - Intel 855 Centrino Chipset

Look in Device Manager and see if there are any yellow flags next to any entries.

Try this thread"

Installing video driver for Intel 855 Centrino Chipset

2 more replies
Answer Match 63%

Hi all,

I have an Asus U56E which has an Intel Centrino 6150 Wireless N + Wimax network adapter on it. This card ran fine the first few months I had it. Then I installed Ubuntu 12.04 with my windows install and ran it dual boot. The card worked fine on Windows but I had to make some configuration changes on Ubuntu for it to run. I did that and it worked fine still. Then, naively, I installed a registry cleaner (wise registry cleaner to be exact), and some time after installing it and running it regularly (usually 2-3 times a week) something went wrong and I started getting this issue with my card. What happens is the wireless will be functioning for some time, perfectly normal, and then it will just lose internet connection. I will have to disable and re-enable the adapter through device manager to get it to work but that only works sometimes, most of the time the device just won't start again and I will get the device can not start error in device manager. Also, when this happens I usually restart my computer and sometimes when I do that (or even when I just turn my laptop on or come back from putting it to sleep) the adapter is not recognized at all, doesn't even show up in device manager. What's most odd about that is that the Wimax still shows up on the list of network adapters but the wireless doesn't show up.

The steps I have taken to try and remedy this issue are, re-install the drivers (by uninstalling them first) from both the asus and intel websites, do a fre... Read more

A:Intel Centrino 6150 network adapter issues

Hello and welcome Sphoenix am no expert but one thing I don't ever do is us reg cleaners I use CCleaner to fix reg issues only. Having said that I find it hard to believe that any software would wreck the network card or any other hardware piece for that matter.

You say you have reinstalled 7 just how did you do that/ and have you still got Ubuntu on board? If not then why not make a bootable disk and use the try Ubuntu to see if you can access the net if you can perhaps there is something wrong with your 7 install.

You could also look through the reg for that registry cleaner entries as although unlikely maybe there are remnants left over. But it would be good to know how you re installed the Windows first.

1 more replies
Answer Match 63%

I just picked up a Dell Latitude e6530 with a Intel Centrino Advanced-N 6205 wifi Card.

My current wireless router goes up to 54 Mbps, This new card can go up to 300 Mbps.

I've done speed tests to determine upload/download speeds and found out I am: Download of 17.54 Mbps and upload of 1.20 Mbps.

My cable modem is a motorrola cable modem.

Any suggestions so i can get the most out of this new wifi card would be appreciated.

A:Need router suggestion for Intel® Centrino® Advanced-N 6205?

Hmm apart from a new modem/ router there isn't anything that will make the old one faster.
If I might suggest I like TP-Link gear and here are some that might make your day.

Newegg.com - TP-LINK Archer C7 AC1750 Wireless Dual Band Gigabit Router IEEE 802.11ac, IEEE 802.11a/b/g/n
TP-LINK TL-WDR3600 N600 Wireless Dual Band Gigabit Router - Newegg.com

The D-Link stuff I quite like too.

3 more replies
Answer Match 63%

Hello everyone,

I recently received a Samsung avit book 4, which has an Intel Cintrino Advance N-6235 wifi adapter. I just did a clean install of Windows 8.1, but I downloaded Samsung Update software to update some drivers, but for the most part I have standard Windows drivers. I have the latest intel wifi driver from their website I; version 17.13.11. The adapter didn't seem to have issues before, and normally maintains connectivity. I recently had the signal drop out, but it typically doesn't happen.
My issue is that I noticed the signal fluctuate up and down even when maintaining full connectivity. (See picture below). It will fluctuate near top speed for whatever router I am on and very low speed <100 kb/s
Is this normal behavior?

Thanks again,

- Joey

A:Intel Centrino N 6235 signal Oscillation: Is this normal?

Yes if there is a lot of congestion. As for speeds, it will only show when data is being transmitted. Depending on the size of the packets and how many, the bandwidth will vary.

3 more replies
Answer Match 63%

Windows 7.build 7000 update

1) download any Drivers Backup software, like DriverMax which is Free
(or grab it here: h__p://***************/files/194969734/drivermax.exe.html)

2) boot your Vista or previous W7 which has working Intel drivers and "Export" your video drivers from your Drivers Backup Software, say DriverMax

3) boot to Windows 7.build 7000 and "Import" your drivers in your Drivers Backup Soft, like DriverMax
(or grab already exported for DriverMax drivers from here: h__p://***************/files/194970262/855gm_vista_driver.zip.html)

ps. any hosting for these files will be greatly appreciated or PM me if you got DL issues

A:Installing video driver for Intel 855 Centrino Chipset

Thank you .but , my video is Intel 830m .

Can you tell me ,How can I install my video driver.?

Same way ???

thank you very much ....

I have install windows7 in my computer..but i can't install my video driver ..
I try everything ......now ,I am very despair .....

9 more replies
Answer Match 63%

im looking to overclock my Intel Centrino Core2 Duo T9300 in my laptop but im not sure what overclocking software to use.. there's plenty of overclocking software out there im just not sure which has best results for a beginner.

if anyone has nay suggestions it would be very much appreciated.
 

A:Software to use to overclock Intel Centrino Core2 Duo T9300

Overclocking a laptop is not a wise thing to do especially by a beginner. Laptop/notebooks are subject to heat much more than desktop computers. Any overclocking results in great rises in heat. My desktop Q6600 at 2.4GHz, runs nominally at 35C. If I raise the CPU to 2.55GHz the temp rises to 45C. I use a ZeroTherm Nirvana to cool the CPU. Your laptop will suffer much more
 

1 more replies
Answer Match 63%

My Intel Centrino 2230 dual-function Bluetooth card is built into my GIGABYTE GA-H77N-WIFI LGA 1155 Intel H77 motherboard. Upon updating all Bluetooth & Wi-Fi drivers (all-in-one card), I was able to get my VXi BlueParrot B250-XT+ to connect as a VoIP headset. There's one major issue, however: the input is incredibly distorted and low-level. If I yell through the microphone I hear a buzzing noise, but otherwise the output from the speakers is virtually silent. This is all with the microphone gain maxed out. Turning the gain down does nothing but silence the microphone entirely (I understand why). I tried to talk to my sister over Skype, and she said that she heard low-level distortion and nothing else. This headset works well with my phone, and has no issues pairing with the PC or phone. Whatever it is must be in the PC. I tried a USB Bluetooth dongle and was able to get great input from the microphone, but then the dongle stopped working. The adapter simply just quit. This was not due to interference from other Bluetooth equipment or software, as neither was operational while the dongle was installed. I would very much like help with this issue, as I purchased the motherboard with the intent to use the on-board Bluetooth, and it seems that USB Bluetooth dongles just don't last, based on my experience and the experiences of reviewers across the 'net.

Thank you for any and all assistance with this issue!

A:Bluetooth mic barely audible, Intel Centrino 2230

Have you tried Soft reset on the device...

2 more replies
Answer Match 62.16%

Intel has warned that out of date drivers for its wireless Centrino platform are plagued with serious security flaws.. The massive 129MB update fixes problems that Intel describes as having the potential to allow 'remote code execution and system control' and affects Intel 2200BG and 2915ABG PRO/Wireless Network Connection Hardware (w22n50.sys, w22n51.sys, w29n50.sys, w29n51.sys) with versions 8 and 9 of the driver.pcpro.co.uk.f-secure.com/weblog.Intel Centrino Patch Follow Up.

More replies
Answer Match 62.16%

HP ENVY dv7-7270ca Notebook PCModel #: C2H79UA I would still like to update my laptop to work on the 5mhz wi fi band. Has there been any recent changes or updates to this question?  The last time I checked the Intel Centrino Advanced-N 6230 WLAN module 670691-001 was the one to try but I would like to know if it is still an option that will work or is there any other method that will work?I need to upgrade to 5 mhz to take advantage of my internet service.

More replies
Answer Match 62.16%

Hi, I have a HP Pavilion dv6t-7000 CTO Entertainment Notebook PC Windows 10 64-bitModel #: A5F76AVSerial: 2CE2281QNFBIOS Version: F.2B I want to upgrade the WLAN Card Intel Centrino N2230 to Intel Centrino Advanced-N 6230 or Intel® Wireless-ACI have read about the BIOS whitelist that will prevent upgrading plus I have read that HP have remove the whitelist. Can one of the expert here tell me if I can upgrade the WLAN card if yes what is the best Card to upgrade with?? If I upgrade my BIOS from F.2B to F.2D Rev. A it will remove the whitelist????  Thanks in advance. 

A:Upgrade WLAN Card from intel centrino N 2230 2.4ghz to 2.4gh...

Hi, Your machine was built late 2011 early 2012 therefore the chance to upgrade wirless card outside the list is from slim to none. Please check a list on page #2 of the Maintenance and Service Guide on the following link:      http://support.hp.com/us-en/product/HP-Pavilion-dv6-Entertainment-Notebook-PC-series/5275442/model/5... Regards.

2 more replies
Answer Match 62.16%

hey all. first time poster. cool forum! let's see what you've got for me. i'd like to know what my options are as far as upgrading my laptop's processor. i have an intel centrino core2 duo t5450 (codename santa rosa) processor @1.66ghz. i understand this is a socket 775, and i'm seeing lots of different processors in that category - both mobile and not. i'd like to know which of those are compatible with my particular setup. my knowledge of such hardware information is nil.

i have a toshiba a200 w/intel 82801hbm ich8-do chipset.

any help is greatly appreciated, thanks in advance.
 

A:Need upgrade info - Intel centrino core 2 duo (santa rosa)

Your cpu is not a socket 775, as that is the desktop core 2 duo socket. You would have a socket "P" system. You'd need a core 2 duo socket P processor. I would think you'd be looking at a core 2 duo T7XXX cpu (eg T7300).

Edit: there are also T8XXX and T9XXX series mobile cpus, but I'm unsure of their compatibility, since they're newer 45nm chips.
 

2 more replies
Answer Match 62.16%

I am stumped with regards on how to fix this one.

I am running a custom built Sager NP-5135, Windows 7 64bit system.

I am actually multi booting this system (Running Linux on one partition, and Windows 7 on 2 other partitions).

The Windows 7 partitions are, for all intensive purposes, the same (configuration wise).

Here is the strange part, the wireless connection on one of the windows installations (Call it Win7_OS_#2) is perfect - great connection speed, range is great, etc, etc (So the 6300 hardware is NOT faulty).

The other Windows 7 partition (Call it Win7_OS_#1) has a terrible time connecting -- the speed is slow (read it as "unusable"). It wasn't always like this, and I don't recall when it became this way as I normally connect using a wired connection.

On Win7_OS_#1 I have uninstalled the driver, reinstalled the latest driver, scanned for virus', trogans, malware, found nothing, and I still can not get it to work properly.

I have checked all the property and advanced settings for the Intel Centrino Ultimate-N 6300 card -- they are set exactly the same as on the Windows 7 installation that is working perfectly.

Does anyone have an idea as to what else I could check to try and resolve the issue (without having to reinstall windows 7 again)?

Thanks for your assistance.

A:Intel Centrino Ultimate-N 6300 - very poor connection speed

Sorry to have to bump this thread, but does anyone have any ideas regarding this issue?

3 more replies
Answer Match 61.74%

Dear Toshiba forum members.
First excuse me for my poor English because my native language is Dutch.

I have recently bought my third Toshiba notebook A Satellite R850-18W.

I already bought a replacement wlan adapter for the original Atheros AR9002WB adapter.
Changing the the adapter in the notebook is easy, I have already done that.

The only problem is, I couldn't get bluetooth working so I put the original Atheros adapter back in my Satellite R850. Everything is working, wifi and bluetooth.

But I want to buy a router with 5ghz band possibility and take advantage of the speed en less crowed 5ghz band. That's why I bought the Intel centrino 6235 adapter.

I need help in which steps to follow to get everything working like it should.

Which software do I need to un-install to avoid problems.
Do I need to un-install the drivers of the Atheros adapter first?

I think and hope it should be possible to make such a minor change in configuration of this notebook?


I guess there isn't an easy way although Toshiba has also notebooks were they use the Intel centrino advanced-N 6235 adapter. I was kind of hoping on an easy software install of drivers and the Toshiba connection software.

Hope anyone can help me with this.
Thanks in advance.

A:Satellite R850-18W: Replacement of Wlan card with Intel centrino 6235

Hi

Not quite sure if you will be able to use this Intel Centrino WLan card.
There is a similar threads about the Intel Centrino Advanced n 6230 and the other user could not enable this card
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65338

Therefore I recommend talking to your dealer if it?s possible to return this kind of WLan card if there would be an compatibility problem.

7 more replies
Answer Match 60.9%

Hello everyone.

I have been researching everywhere on the internet about this topic. Seems it's a pretty common problem with this model and many others. I just cant seem to find a straight forward fix. It started off with the laptob bios test which stated that my hdd was shot. I talked to the tek guy and he wants to charge me $375 for a new 200g hdd + service fees. I bought a 500gb off newegg for $50. I want to do this myself so any help would be awesome!

so far this is the info I got for ya. I ordered the recovery disks, installed em. Everything loaded up and followed promps so it cant be the screen or video card. BUT upon restart the black screen comes back, occasionaly with a blinking curser. Windows loads up after a great number of startups, but shuts back down.

The "Bios" pheonix, comes up; esc= unable startup message f1=sys info f2=startup check(doesnt work) f9= change boot device order f10=enter setup f11=syst recovery......... then black screen

not trying to recover anything and if possible complete reset or different OS like xp, ubunto or something would be fine with me.
 

A:HP pavilion dv6700 cto, intel centrino, vista, 32bit, black screen problem

No one has any info on some sort of complete restart program. Maybe another Bios and OS i can use???
 

3 more replies
Answer Match 60.06%

 Hello, Wireless functionality was lost on my HP Pavillion dv7t-6c00 laptop when I upgraded to Windows 10. Here's what I have in my laptop now: Manufacturer: Intel CorporationDescription: Intel(R) Centrino(R) Wireless-N 1030Driver version: 15.11.0.8 I've read some support threads on this topic and it seems that this wireless card is not supported by Intel in Windows 10. I've also read that one suggestion is to replace the wireless card with an Intel Advanced-N 6230 wireless card. I tried to replace the wireless card prior to upgrading to Windows 10 with an Intel Advanced-N 6230 wireless card but the wireless card I purchased seemed incompatible with the laptop, as it gave me a Halted screen when I started up the laptop.  So my frustration is I would gladly and easily replace the wireless card but I can't keep purchasing cards that are incompatible with the laptop. What are my options?  Is there a specific/guarenteed HP Laptop compatible part number that I can purchase?   Even better, is there a link to where I can purchase a card that will definitely work? Thank you ver much,Chris  

More replies
Answer Match 57.54%

Hi,

I last updated my Intel Centrino Wireless-N 2230 on May 26 to the newest driver available at the time through Intel's website. That turned out to be a mistake. It usually worked but about once a week, when waking up my computer, it would have issues connecting to my network. A Windows repair usually fixed it.

Today I woke it up and could not connect at all. Repairing did nothing. I went into Device Manager and found that it said, roughly, "There is no driver installed for this device." I first tried to rollback the driver. Device Manager froze for about ten minutes. When it started working again, I disabled and re-enabled the wireless, found my network, entered my password, but it still wouldn't connect. I used HP Recovery Manager software to reinstall the original driver.

When it was done, it prompted me to restart. After a while, I saw a BSOD labelled DRIVER_POWER_STATE_FAILURE (Minidump is a separate attachment). After my computer booted up, I checked Device Manager. My wireless was disabled because of a Code 22: Windows disabled it because of a known issue. I manually enabled it and it now works fine with driver number 15.10.3.2 dated 22 August 2013. It's definitely older than the May 2014 driver but not the original system installed driver, 15.5.6.48 from November 2012, which seems to have caused the crash.

I'm just wondering if my computer and wireless connection will remain stable and, if not, how I should fix it.

I have Windows 8.1 on an HP m6-1158c... Read more

A:DRIVER_POWER_STATE_FAILURE - Centrino Wireless-N 2230

Hi Malickfan,

I have analyzed your dump files and below has been provided an analysis of your dump file :-

Code:
**************************Tue Jul 1 23:08:02.341 2014 (UTC + 5:30)**************************Probably caused by : ntkrnlmp.exe ( nt!PnpBugcheckPowerTimeout+6a )

BugCheck 9F, {4, 12c, ffffe001d80ef880, fffff8023d7ea950}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_4_nt!PnpBugcheckPowerTimeout

MaxSpeed: 2200

CurrentSpeed: 2195

BIOS Version F.25

BIOS Release Date 01/21/2013

Manufacturer Hewlett-Packard

Product Name HP ENVY m6 Notebook PC

??????????????????????????????????????????????????????????????????????????????????????``


Now, we see that the "ntkrnlmp.exe" is blamed, but as we know that it is a Windows component, chances of it being at fault is very less.

As it seems, that since your Wireless driver was causing the problem. It should probably work fine. The BSOD might be a one time issue. In case of further BSOD's please don't hesitate to post back here. In case you want the list of 3rd party drivers to update let me know and I will post it.

3 more replies
Answer Match 57.12%

If my Toshiba laptop has a Centrino Wireless N adapter, can I get more download speed from a router with the latest 802.11ac protocol. . . or does one have to have a Wireless AC adapter to take maximum advantage of an 802.11ac router?
 

A:Solved: Wireless N Centrino adapter vs. 802.11ac

10 more replies
Answer Match 57.12%

Hi TSG,

I have a Sony Vaio laptop (WinXP) with B/G wireless integrated card connecting to a 8011/B Netgear DG824M AP/Firewall/Router acting as a DHCP (or is it DCHP?). I have connected to the router and other desktops/laptops on my wireless home network in the past.

But - the connection intially shows up as "Excellent" but then is lost and I am unable to reconnect. I have researched this problem on the net and have changed battery power saving setting, installed the latest Intel drivers, removed MS XP SP1 WAP patches that may have caused a problem and released & renewed the IP address many times but to no avail.

My Intel ProSET software says that the wired connection has an IP address of the 'correct' 192.168.0.2 (even though it is unplugged) but the wireless card has 0.0.0.0 (cannot renew its IP address). Have these adapters gotten confused or are there some other things I can try to sustain a connection?

many thanks in advance.
 

More replies
Answer Match 48.72%

Hello All

I have a Toshiba M40 Laptop, and i recently updated the drivers for my wireless card and network card. Now when i run autoruns (a program i downloaded form Optimze XP), it says that IntelWireless and Intel Zero Config are running on startup. I dont want them to be!

Do i need them? Can i run them manually if i need them? Cause i'm not always connected to wireless, most of the time i'm connected hardwire and i know windows takes care of that.

Thanks a lot

Bryan
 

A:Intel Wireless and Intel Zero Config

7 more replies
Answer Match 48.3%

i have an acer laptop and recently updated my computer with th latest intel pro/wireless software. and this is what happened.

When I right click on the Wireless icon -everything is greyed out except for
OPEN INTEL PROset WIRELESS and OPEN INTEL WIRELESS TROUBLESHOOTER.
- When I click the Troubleshooter the message is CURRENTLY THERE ARE NO
ISSUES REPORTED.
-When I click on OPEN Intel proset Wireless the pop says Intel
PROset/Wireless was unable to detect a supported wireless adapter. Pls.
install a supported wireless adapter.

* If I go to drivers and look at Network Adapters - it shows Intel
PRO/Wireless 2200BG Network Connection in green but if I right click it, I
see a pop-up that says ADAPTER STATE NOT FOUND IN REGISTRY. If I click OK
button on the pop up, it shows a window with 5 tabs( General,
Advanced,Driver, Details, Resources) - In the general category its says"
This device is working properly" and the Device usage shows Device enabled.


i uninstalled both the drivers and the sofware and reverted to the old one but to no success.
after doin a lot of research i have to come to know a piece of program that tells me that i have 3 wireless adapters. probably the duplicates? but how do i remove them and make my wireless right

A:Intel PROset/Wireless was unable to detect a supported wireless adapter. Pls. install

its an intel pro/wireless 2200BG

5 more replies
Answer Match 48.3%

Hello,

I have a laptop dell xps M1210 with Intel(R) PROSet 3495 ABG. It has been working well for several years.

Yesterday morning I got an error: "Problem applying profile", then it couldn't been connected.

I did a lot of things.
1) Update the driver from 10.5 to version 12.1
2) Make sure "Wireless Zero Configuration" service started.
3) Uninstall the wireless adapter and reinstall it.
4) reboot the machine.
....

It is not working today. The error becomes "Intel(R) PROSet/Wireless Software was unable to detect a supported wireless adapter.".
By checking the device manager for connectivity, everything looks good.

One thing I must mention is sometimes I got an error that is "Microsoft Help and Support Center has encountered a problem and needs to close...."

The detail is Error signature
AppName:helpctr.exe AppVer: 5.1.2600.5512 ModName: ntdll.dll
ModVer: 5.1.2600.5512 Offset: 0000100b.

I am frustered but I don't want to reinstall windows system.
My OS is win xp pro sp3.

Thanks for your reading and help.
 

A:Intel(R) PROSet/Wireless Software was unable to detect a supported wireless adapter.

14 more replies
Answer Match 48.3%

Hello!

I will start this off by freely admitting I'm not great with computers and usually don't know what I'm talking about.

I have an Acer Aspire 4720Z laptop.
I recently wiped it clean and installed Windows XP, and have not been able to connect to wireless internet ever since.
I used the Acer website to download the drivers, extracted all the files, etc.

When I open Intel PROSet/Wireless, I get an error message that it is "unable to detect a supported wireless adapter. Please install a supported adapter."

Also, Intel PROSet/Wireless does not appear on my Device Manager. (The only things that are listed under "Network adapters" is 1394 Net Adapter and Broadcom Netlink Gigabit Ethernet.) I feel like that's probably part of the problem, even if I'm not sure why, haha.

What can I do to get my wireless access back?

Thank you.
 

A:Intel PROSet/Wireless unable to detect a supported wireless adapter

6 more replies
Answer Match 47.88%

Dear all,

I thought I have met this problem before before my two wireless adapters both stopped working.

PCI-E INTEL 5300
TP-LINK WN821N

My case is a little different from those I found on this forum.

1. When I upgraded my thinkpad x200 to win7 64bit, I don't have "Wireless Network Connection", but I fixed it by stopping one setting of Kaspersky and it came back, so when I first found my PCI-E wireless didn't work, I thought the same thing happened, although I didn't remember the details, I tried the Kaspersky, don't work.

2. I updated the drivers, uninstall-install, start-stop-start WLAN AutoConfig... I have done a lot that can be searched on line, never worked for me.

3. Tragedy happened, I adjusted several common options on BIOS, then after several tries I made to make 5300 work, USB wireless died Don't know how to recover it, and back to my laptop again.

Could anyone here help me out? Really appreciate it! I have spent two days on this stuff, if no one can do this, I guess the only way is to reinstall the OS, that's the least thing I want to do.

Thanks!!!!!!!!!!!!

Mic

PS: Unavailable wireless adapters have all zero Mac addresses, also can't be found in control panel.

A:PCI-E intel 5300 wireless doesn't work. Then the USB wireless adapter

Problem solved. Thanks anyway.

2 more replies
Answer Match 47.88%

I bought a toshiba satellite m45-s2692 on April 2, 2006.
It has an intel pro wireless 2200bg adapter - driver v 9.0.1.9
I have it connected a netgear wgr614v5 router.
it has a problem maintaining a constant speed. I watched the network monitor on the notebook and it always shows a "connection excellent" however, the speed is not constant - it will vary from 1mbsp to 54 mbsp - but seldom does it maintain the 54 mbsp.

on 4/20/2006, I sent the machine to toshiba - they replaced the network adapter - or so they said, and wiped the hard drive and reinstalled the original software.
I rec'd the machine back and find that the problem has not changed - it still will not maintain a steady speed so viewing files on other pcs on the lan takes forever and page loads on the net can also occupy too much time.

I have an older toshiba satellite with a netgear wireless wg511t adapter.
I have watched the monitor on that one and it will show connection excellent and maintains a steady speed of 54 mbsp. these two machines can be sitting side by side or in separate rooms and still the old one will maintain it's connection and speed but the new will not maintain the speed.

I called toshiba up again, and they want to say it's my router. I explained to them that another toshiba on the same network does not faulter -- so how can it be the router?
they didn't want to, but they are "granting" me service to send the machine back to them again. I haven't... Read more

A:wireless connection speed issue - intel pro wireless 2200bg

15 more replies
Answer Match 46.62%

hello all,I have aproblem with my XP machine.when i boot up the small wireless icon says its not connected,Also when i click to view available wireless networks that there are none in range, i reboot the pc and it might resolve it .More often than not it doesnt.Also i sometimes get a yellow exclamation mark over the wlan in device manager.I update the driver and it resolves until next time i boot back up the pc.Wireless switch is on. My 2 other pcs wrk perfect.This is doin my head in .Any thoughts would be greatly accepted.
 

A:intel (R)pro wireless 22800 wireless card

Closing duplicate to: http://forums.techguy.org/networking/625631-wireless-intermittantly-working.html#post5125511
 

1 more replies
Answer Match 44.94%

Greetings,  I was wondering what to look for if I wanted to upgrade my 320-1030  in terms of a motherboard and CPU? I was contemplating upgrading the CPU to an A8-3820 on the existing board, but I now am wondering if it is possible to move to a faster CPU (which I am assuming would require a new motherboard  if that is possible).

More replies
Answer Match 44.52%

One of our users just lost control of her PC. Someone remotely took control of her mouse. The only unusual activity we have seen thus far is Port 1030 called iad1. Has anyone seen this?
 

A:iad1 on TCP 1030

Hi nmorrisonaz,

Not sure If any malware can do that.

But please do this. Click here to download Hijack This. Run Hijackthis.
Click the "Scan" button when the scan is finished the scan button will become "Save Log" click that and save the log.

Go to where you saved the log and click on "Edit > Select All" then click on "Edit > Copy" then Paste the log back here in a reply.

DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required. Someone here will be glad to advise you on what to fix.

*Note: When you download Hijack This Do Not download it to a temp folder or to the desktop. Create a permanent folder somewhere like in My Documents and name it Hijack This and put it in that folder.
 

3 more replies
Answer Match 44.52%

Does anyone know where I can order an usb drive to get my HP Mini 1030NR restored to factory setting? Thnx 

A:Hp Mini 1030 NR

hi. did you ever get the recovery disks? I am in the exact same situation and cannot for the life of me find the recovery image anywhere!

1 more replies
Answer Match 44.52%

Hello, I've been saving up for some time now and I would like to build a good gamin computer. I know I have the right money to build a solid performing one, one that can run games on high quality too. The only problem is, I don't know which parts to buy. I do know how to build it however. I would like some help selecting parts from you. One final point, I will want it for doing other stuff, not demanding just practical uses like searching and making documents etc. Thanks so much!
 

A:New PC Build - £620 ($1030)

You need to provide a little more info;
1 Do you want amd or intel?
2 Do you have any parts you are going to reuse ie case, keyboard/mouse, optical drive, etc?
3 Are you including the cost of windows for your new build?
 

2 more replies
Answer Match 44.52%

On the hp website it stated that the i7 2600 is supported, now that I tried it on boot the screen says unsupported cpu installed and it justs shuts down, I already upgraded the bios any suggestions that I can do to resolve this? thanks in advance

A:520-1030 cpu upgrade

An Intel Core i7 2600(95W TDP) and 2600s (64W TDP) is supposed to be supported. Are you certain that what you installed is not an Intel Core i7 2600k instead?

9 more replies
Answer Match 44.1%

   Information
Foxits free PDF Reader has been updated to 3.1.3.1030. You can get it here.
Foxit Software

A:Foxit PDF Reader 3.1.3.1030 available

+1 for Foxit Reader (especially those of us with a distaste for Acrobat).

2 more replies
Answer Match 44.1%

v6.2.0.1030 Apr 13, 2015

Fixed: Bug fixes
http://www.360totalsecurity.com/en/version/ts/

Download:
http://free.360totalsecurity.com/totalsecurity/360TS_Setup_6.2.0.1030.exe
 

More replies
Answer Match 44.1%

For this type what can I upgrade my processor to?  I believe it's only a 4GB as well. I need more RAM and processing power. thank you

A:I have an HP TOUCHSMART 320 PC MODEL 320-1030 looking to upg...

Hi, Yes. Please check 2 sections Processor upgrade informationMemory upgrade informationon the following link:     http://support.hp.com/au-en/document/c03026602 Regards.

1 more replies
Answer Match 44.1%

I was trying to speed up a Touchsmart 600   Info below:
Model #: 600-1000t
Product #: AW023AV-ABA
[personal information removed]
Software Build #: 94NAv6PcA5
Service ID #: 011-610
PCBRAND: Pavilion
 
I search HP support and it says :   
Memory: DDR3 SO-DIMM (200-pin)
Tyoe: PC3-10600 (DDR3-1333 MHz)
 
Of course when I google "DDR3 SO-DIMM (200-Pin) PC3-10600 i get all types of hits for HP Touchsmarts,  when I remove the (200-pin) from the search criteria i get all types of 204-pin RAM Sticks. 
 
I would tend to beleive that HP's telephone support technicians in what sounds like india don't know and they're looking it up in their data-bases.  I believe the HP databases to be incorrect.  The best option is to remove a stick and see exactly what the label on the Memory Stick says, and then buy bigger sticks of the same RAM as in the computer.  I have 3 sticks to try,   DDR3 - 1066 MHz,  DDR3 - 1333MHz  & DDR3-1600MHz.  i think it's the

A:Touchsmart 320-1030: Is it 200 pin SO-DIMM or 204?!?!? Yet m...

Spoiler (Highlight to read)  I think I'm going to go with the 204-Pin.   I think the printed HP documentation is a typo and they really intended to type 204-pin.   I don't think it's my memory anyway because the usage rarely goes over 25% usage of physical memory.  i think the server i'm accessing is running slow... 

1 more replies
Answer Match 44.1%

So I want to upgrade my RAM on the 320-1030. The specs page says "Two 200-pin DDR3 SO-DIMM sockets".It also says "Supports DDR3 SO-DIMMs" and specifically "PC3 10600 (1333 MHz)" and "PC3 12800 (1600 MHz)". Yet more HP contradictions (lies?)1) The parts page lists the item pre-installed is 572293-D88, a 204-pin item. See here, here, here, here, and here.2) Using the automated systems for major RAM sellers all indicate 204-pin RAM will work on the 320-1030. Crucial.comNewegg.com What gives?!? 

A:Touchsmart 320-1030: Is it 200 pin SO-DIMM or 204?!?!? Yet m...

Hi: I do not believe there is any such thing as a 200 Pin DDR3 SODIMM, so HP's reference to that is incorrect. A DDR2 SODIMM memory module is 200 pin, and a DDR3 SODIMM is 204 pin. http://en.wikipedia.org/wiki/SO-DIMM Paul

9 more replies
Answer Match 43.68%

Hi, I hope someone out there can shed a little light on this situation as it's doing my nut in!

We have a network with 3 Windows 2003 servers and workstations all with XP. When the users log in a script runs which maps network drives and pushes printer connections etc. Also we have several group policies set which restrict pupils and staff in certain ways. Nothing drastic though. Just 'Cant see certain Control Pannel Items etc'.

Now all was working perfectly until a couple of weeks ago 2 staff members came to me and said "I can't get on the interenet or e-mail". I had a look and when they logged in on their normal computer it seemed to log in fine but then receieved a couple of "Cannot perform this action due to restrictions on effect on this computer" messages. This message also appears when they try to click on the Internet for example. On closer inspection it has run the scripts ok because I have the shared drives and printers. But the virus scanner which is sophos in our case hasn't loaded (it comes down from the server), also there is no All Programs in the start menu, or shut down.

If I log off and check the event viewer I have event 1030 there which refers to an error with group policy.

Now the most annoying problem is it appears completly random with it's timing. Usually a shut down and restart of the computer fixes it. Moving to another computer can also fix it. It dosent always do it on the same computers, other peolpe can log on to ... Read more

More replies
Answer Match 43.68%

Is it just my imagination or has the attempts to begin communication on about ports 1025-1035 begun to rise?

Looking over data on this I really dont see its nominal importance other then the beginning of the road or bottom of the stairs to attempt throughput communication, if you will =)

Anyone else care to take a stab at this ?

-Z
 

A:Port 1030 Alerts, Give or Take

7 more replies
Answer Match 43.68%

Hi, I hope someone out there can shed a little light on this situation as it's doing my nut in!

We have a network with 3 Windows 2003 servers and workstations all with XP. When the users log in a script runs which maps network drives and pushes printer connections etc. Also we have several group policies set which restrict pupils and staff in certain ways. Nothing drastic though. Just 'Cant see certain Control Pannel Items etc'.

Now all was working perfectly until a couple of weeks ago 2 staff members came to me and said "I can't get on the interenet or e-mail". I had a look and when they logged in on their normal computer it seemed to log in fine but then receieved a couple of "Cannot perform this action due to restrictions on effect on this computer" messages. This message also appears when they try to click on the Internet for example. On closer inspection it has run the scripts ok because I have the shared drives and printers. But the virus scanner which is sophos in our case hasn't loaded (it comes down from the server), also there is no All Programs in the start menu, or shut down.

If I log off and check the event viewer I have event 1030 there which refers to an error with group policy.

Now the most annoying problem is it appears completly random with it's timing. Usually a shut down and restart of the computer fixes it. Moving to another computer can also fix it. It dosent always do it on the same computers, other... Read more

More replies
Answer Match 43.68%

I just looking for information on how to install windows 10 on my Touchsmart 320-1030 PC. The PC is only 2-4-year-old and runs great. What steps do I need to take, in order to install windows 10 on this device?

More replies
Answer Match 43.68%

I am totally obsessed with downloading music, but awhile ago I attemped to download an upgrade to the basic Kazaa system. Once I had fully downloaded the upgrade I went to click on Kazaa and a message popped up saying," You have uninstalled a part of Kazaa needed to run and to close and reinstall." (I believe it was called error 1030, I'm not positive though) Anyway, I uninstalled Kazaa and reinstalled several times and the same message keeps appearing.I checked to make sure I had all the needed componets to run Kazaa aswell. I can't figure out what to do. I tried other music sources but I can't find one I like as much as Kazaa. If you know what I should do please HELP!!
 

A:Kazaa Error 1030, any adivse?

What I would do is:

1. Use a spyware scanner to delete all the spyware that comes with the Kazaa download
2. uninstall Kazaa using the JV16 power tool
3. Do a file search for Kazaa and delete all of the files that are found.
4. Backup the registry
5. Use Jv16 power tool to clean the registry.
6. If you want to and are brave enough, do a manual search for useless Kazaa keys in the registry (be sure to have a backup if you do this)
Reinstall the latest Kazzaa with all of its Spyware. (Perhaps you might want to try Kazaa Lite)
 

2 more replies
Answer Match 43.68%

Hello, we have recently purchased several HP Elitebook 1030 G1 notebooks. These come with Windows 10 out of the box, and no discs at all. HP seem to offer a Windows 7 recovery disc via drivers & downloads but this only seems to be for drivers and applications post-Windows 7 install. We still use Windows 7 (Enterprise x64) deploying via SCCM. As the laptop doesn't have a LAN port HP support suggested getting an HP USB-C to Ethernet adapter, but this doesn't seem to help with PXE boot. So moving onwards, I then attempted to do a manual install of Windows 7 x64 via USB. Initially it didn't even boot without turning off secure boot and turning on legacy boot. As the laptop has an M.2 ssd it is not even found by the setup process. I have now gone through adding sata and usb3 drivers via dism to boot+install wim's and also an MS hotfix for NVMe support (https://support.microsoft.com/en-us/kb/2990941). Unfortunately after all this it is still not able to see the hard drive. Unless I am going blind I cannot see any information about this on HP Support. Has anyone done this on this model notebook or similar (ie M.2 ssd)? Thanks

More replies
Answer Match 43.26%

Hi, I have a Dell Inspirion 6000 Laptop. Its a Intel Centrino Mobile Technology. I booted it up today and my wireless will not work. When I click on the Intel PRO/Wireless icon in the bottom right, it now says, "No supported wireless adapters available in the system" instead of the wireless network im connected to. The icon also has a little red 'X' on it. I tried installing new drivers for it off of Intel's website, but im still having the same problem. Any help appreciated!

Thanks
 

A:Intel PRO/Wireless Help!

make sure its turned on on your computer
there is a blue function button in the bottom left and then i think on one of the f buttons (f4?) there is a blue picture of what looks like a radio tower. hold the function button and press the blue radio tower.there should be a light next to numlock,capslock,scrolllock that lights up in the picture of a radio tower. if that's even the problem
-Mphair
 

2 more replies
Answer Match 43.26%

The video card in my Pavilion h8-1030 died and I need to find a replacement. If possible, I'd like to upgrade the card at the same time to the best possible card that would work on this system, within on total $350 budget. Being overly optimistic and with a big dose of wishful thinking I had actually ordered a MSO GeForce GTX 970 , but before it arrived I read that it will not work as teh BIOS version cannot be upgraded to version 8. So I am sending that card back as soon as it arrives. I am unable to buy a whole new computer at this time, so I'm going to have to settle for a new GPU (and PSU if needed). I don't game but I do use Adobe CC 2015 applications, mostly photoshop adn lightroom but ocasionally also premiere and in-design. Before failing the old card was struggling with certian photoshop functions and video editing was slow and frustrating. This is why I would like to upgrade the GPU. Motherboard H-RS880-uATX (Aloe)Processor AMD Phenom II X6 1090TMemory 10 GBBIOS, American Megatrends Inc. 6.12 Is there a list of compatible GPUs? Thank you ever so much for your help.

A:what Video Card upgrades are possible for Pavilion h8-1030?

Hi, The version 6 BIOS in your PC is not compatible with many of the newer graphics cards.  You will need to use an older legacy graphics card in your PC.  The processor and memory in your PC are more than sufficient for most use. I suggest that you look for a NVIDIA GTX 660 for around $226 new on Amazon. You can find the GTX 660 on eBAY for a lot less.  You will also need to replace the power supply. The Corsair CX650m should be around $55 after rebate.    

2 more replies
Answer Match 43.26%

Hello, i have an HP Touchsmart 520-1030, and i wish to upgrade it with i3-3225 processor that i own. Tried to replace it with mine i3-2120, but pc just does not boot. Any way to upgrade bios to support ivy bridge processors? For now i have latest bios 7.12. I see the only difference between models that support ivy and not, is MB name Lavaca3SB[supports ivy] and LavacaSB[does not]. Is it the same mb and i can install Lavaca3SB's bios to mine LavacaSB board or this will not work that way?

More replies
Answer Match 43.26%

hi!

hello, first off i have scanned with adaware pro se, spybot, and h2, also mcafee antivirus and a couple of online scanners--this is what remains

i have some pesky files burrowed into my pooter, i am pretty sure the files in the temp folder are bad....but when i search for the executable, all i can find are prefetch files....i think the prefetch files are generating the temp files...

i have used msconfig to stop some files from statring,and that has stopped an error screen that displayed this message at start up everytime:

rundll egdhtml-1030 dll error

i reactivated them in msconfig for this logfile...

also- whenever i turn on the computer, it frezzes up after booting to windows, i found that killing all the rundll32.exe files make it able to run again!!!!!!

so they must be bad, too...

here is my log, thank you very much for any help!!

Logfile of HijackThis v1.99.0
Scan saved at 3:36:10 PM, on 1/30/2005
Platform: Windows XP SP1 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\McAfee\McAfee Privacy Service\GUARDDOG.EXE
C:\WINDOWS\system32\gearsec.exe
c:\PROGRA~1\mcafee.com\vso\mcvsrte.exe
C:\PROGRA~1\McAfee.com\PERSON~1\MPFSERVICE.exe
C:\PROGRA~1\McAfee\SPA... Read more

A:egdhtml-1030.dll error+rundll32.exe*logfile inc.*

Please print out or copy this page to Notepad. Make sure to work through the fixes in the exact order it is mentioned below. If there's anything that you don't understand, ask your question(s) before proceeding with the fixes. You should not have any open browsers when you are following the procedures below.

Go to My Computer->Tools/View->Folder Options->View tab and make sure that 'Show hidden files and folders' (or 'Show all files') is enabled. Also make sure that Display the contents of System Folders' is checked. Windows XP's search feature is a little different. When you click on 'All files and folders' on the left pane, click on the 'More advanced options' at the bottom. Make sure that Search system folders, Search hidden files and folders, and Search subfolders are checked.

For the options that you checked/enabled earlier, you may uncheck them after your log is clean. If we ask you to fix a program that you use or want to keep, please post back saying that (we don't know every program that exists, so we may tell you to delete a program that we think is bad to keep).

Turn off system restore by right clicking on My Computer and go to Properties->System Restore and check the box for Turn off System Restore. Click Apply and then OK. Restart your computer. After we are finished with your log file and verified that it's clean, you may turn it back on and create a new restore point.

Download AboutBuster and unzip it to a folder on your the D... Read more

4 more replies
Answer Match 43.26%

First up, hello everyone.

I have XP computers connected to a SBS2003R2 domain that is posting 1030 Userenv errors in the eventlog. I've not checked them all but three of them definitely are, so we can presume they all are.

Through Userenv.log, I've wiggled it down to two variants of:

USERENV(314.480) 21:50:37:892 ProcessGPO: CheckFilterAcess failed for <CN={C94DA5DA-A892-44ED-B77D-618A143ED5CC},CN=Policies,CN=System,DC=[domainname],DC=local>. Filter not found
Click to expand...

Followed by many of the following that correlate with the eventlog errors:

USERENV(318.868) 09:47:24:929 ProcessGPOs: GetGPOInfo failed.
Click to expand...

My question is - whereto from here? OUs, GPO and the such is on the edge of my knowledge. It seems that if I can find what GPO is failing, I'm there.
 

A:Eventlog 1030 and userenv GetGPOInfo failed

I would suggest since you are apparently having troubles with a Small Business Server that you ask to have this post moved to the Networking forum here at TSG. You will get a better response there. You can do this by clicking the little triangle at the top right corner of the window and ask a moderator to please move this thread to that forum
 

2 more replies
Answer Match 43.26%

These event just started appearing a day or two ago, but they continue to repeat every 5 minutes:

Event 1030:
Windows cannot query for the list of Group Policy objects. Check the event log for possible messages previously logged by the policy engine that describes the reason for this.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Event 1058:
Windows cannot access the file gpt.ini for GPO CN={31B2F340-016D-11D2-945F-00C04FB984F9},CN=Policies,CN=System,DC=bbpi-pdc,DC=billsblue,DC=com. The file must be present at the location <\\bbpi-pdc.billsblue.com\sysvol\bbpi-pdc.billsblue.com\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini>. (Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator. ). Group Policy processing aborted.
They occur exactly every five minutes, and always in this order. I searched for the gpt.ini file it's looking for and found it.

I don't really have any group policies in place, just basic users and computers. Nothing fancy. And I'm afraid I don't quite understand AD enough to just 'experiment' until I make these error go away.

Any ideas and/or guidance would be welcome.... thanks
 

A:Event 1030 & 1058, repeating. Guidance?

One possibility:
As per Microsoft: "This behavior may occur if the following conditions are true: your Windows XP-based computer is a member of a domain, and the Microsoft Distributed File System (DFS) client is turned off (disabled). To resolve this issue, turn on (enable) the DFS client". See M314494 to find out how to do this. Also check M810907 for a hotfix.

Other possibilities:
http://www.eventid.net/display.asp?eventid=1030&eventno=1542&source=Userenv&phase=1
 

3 more replies